Fri, 22 Nov 2024 16:20:52 UTC | login

Information for build fwupd-1.8.7-2.0.riscv64.fc37

ID221573
Package Namefwupd
Version1.8.7
Release2.0.riscv64.fc37
Epoch
Sourcegit+http://fedora.riscv.rocks:3000/rpms/fwupd.git#3cd9695d7f37d22c4e950b8aa0e565cc626b3700
SummaryFirmware update daemon
Descriptionfwupd is a daemon to allow session software to update device firmware.
Built bydavidlt
State complete
Volume DEFAULT
StartedTue, 22 Nov 2022 09:47:54 UTC
CompletedTue, 22 Nov 2022 10:17:00 UTC
Taskbuild (f37, /rpms/fwupd.git:3cd9695d7f37d22c4e950b8aa0e565cc626b3700)
Extra{'source': {'original_url': 'git+http://fedora.riscv.rocks:3000/rpms/fwupd.git#3cd9695d7f37d22c4e950b8aa0e565cc626b3700'}}
Tags
f37
f38
RPMs
src
fwupd-1.8.7-2.0.riscv64.fc37.src.rpm (info) (download)
riscv64
fwupd-1.8.7-2.0.riscv64.fc37.riscv64.rpm (info) (download)
fwupd-devel-1.8.7-2.0.riscv64.fc37.riscv64.rpm (info) (download)
fwupd-plugin-flashrom-1.8.7-2.0.riscv64.fc37.riscv64.rpm (info) (download)
fwupd-plugin-modem-manager-1.8.7-2.0.riscv64.fc37.riscv64.rpm (info) (download)
fwupd-plugin-uefi-capsule-data-1.8.7-2.0.riscv64.fc37.riscv64.rpm (info) (download)
fwupd-tests-1.8.7-2.0.riscv64.fc37.riscv64.rpm (info) (download)
fwupd-debuginfo-1.8.7-2.0.riscv64.fc37.riscv64.rpm (info) (download)
fwupd-debugsource-1.8.7-2.0.riscv64.fc37.riscv64.rpm (info) (download)
fwupd-plugin-flashrom-debuginfo-1.8.7-2.0.riscv64.fc37.riscv64.rpm (info) (download)
fwupd-plugin-modem-manager-debuginfo-1.8.7-2.0.riscv64.fc37.riscv64.rpm (info) (download)
Logs
riscv64
build.log
hw_info.log
mock_output.log
root.log
state.log
Changelog * Tue Nov 22 2022 David Abdurachmanov <davidlt@rivosinc.com> 1.8.7-2.0.riscv64 - Add riscv64 * Wed Nov 09 2022 Richard Hughes <richard@hughsie.com> 1.8.7-2 - Fix the lvfs-testing remote * Wed Nov 09 2022 Richard Hughes <richard@hughsie.com> 1.8.7-1 - New upstream release - Add a new HSI check for the leaked Lenovo 'Key Manifest' hashes - Allow parsing metadata more than 1MB in size - Do not follow symlinks when searching for ESP devices - Fix a regression when using fwuptool install-blob with FMAP firmware - Measure system integrity when installing UEFI updates - Only count the Microsoft hashes when getting the dbx version - Only use the IFD when the system is Intel-based - Record more host DMI data when submitting a report for dbx failures - Support loading CoSWID when only one role has been set - Use xz-compressed metadata to reduce bandwidth used by ~25% * Fri Oct 07 2022 Richard Hughes <richard@hughsie.com> 1.8.6-1 - New upstream release - Allow disabling a DFU device when required - Fix a regression when getting the i2c bus number - Fix a small memory leak when reloading the parade-lspcon device - Fix installing the dbx update when using fwupdtool - Improve writing CoSWID and uSWID metadata - Only request the BOS descriptor for newer libgusb versions - Prevent high memory usage when loading corrupt SREC files - Reduce the installed package size by more than 30% - Translate more interactive messages - Try harder when trying to find the default ESP volume - Use a higher compression preset for the UEFI splash images * Thu Sep 22 2022 Richard Hughes <richard@hughsie.com> 1.8.5-1 - New upstream release - Add new plugin to display SMU firmware version on AMD APU/CPU - Add support for platform capability descriptors so devices can set quirks - Always check the BDP partitions when getting all the possible ESPs - Correctly update Wacom AES devices - Disable changing sleep mode on Ryzen 6000 systems - Do not show the 'may not be usable while updating' message for DBX updates - Fix a critical warning when issuing Secure Boot modem AT commands - Fix a fuzzing crash when parsing malicious FDT data - Fix a possible crash when dumping VBE firmware - Fix a possible critical warning when parsing cabinet archives - Fix a regression when parsing pixart-rf firmware - Fix a small memory leak when parsing UF2 files - Fix checking for invalid depth requirements - Fix parsing the coSWID firmware ID when encoded as a UUID - Fix parsing uSWID uncompressed metadata - Fix uploading to DFU-CSR devices - Load coSWID metadata from a uSWID MTD block device - Never save the Redfish auto-generated password to a user-readable file - Only create users using IPMI when we know it's going to work - Write all the CCGX metadata block as intended * Tue Aug 30 2022 Richard Hughes <richard@hughsie.com> 1.8.4-2 - Fix fwupd-devel upgrade issue. * Tue Aug 30 2022 Richard Hughes <richard@hughsie.com> 1.8.4-1 - New upstream release - Add a translated title and long description for HSI security attributes - Add support for reading and writing BIOS settings - Correctly detect CET IBT - Do not require UEFI capsule updates for checking TPM PCR0 - Do not show HSI events where we changed the spec result value - Fix applying the latest DBX update - Include vfat in the list of possible BDP partition types - Install all devices with the same composite id in fwupdtool - Only fail the kernel HSI test for specific taint reasons - Only show changed events in fwupdmgr security - Update vulnerable CMSE versions from CSMEVDT data * Fri Jul 22 2022 Richard Hughes <richard@hughsie.com> 1.8.3-1 - New upstream release - Add resolution flags to each security attribute failures for the user - Allow loading in emulated host profiles for debugging - Check if Intel TME has been disabled by the firmware or platform - Do not use CoD even when advertized on non-aarch64 platforms - Fix a crash when updating the Logitech Bolt radio device - Fix a critical warning when parsing an invalid PHAT record - Fix a critical warning when parsing invalid FDT firmware - Fix fwupdmgr security when plugins are added to the blocklist - Fix parsing SMBIOS data to correct the device hardware IDs - Fix uploading signed reports by sending the correct checksum - Use the correct protocol attribute name when exporting to JSON - Wait for the system to acquiesce after doing each update * Thu Jul 21 2022 Fedora Release Engineering <releng@fedoraproject.org> - 1.8.2-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild * Mon Jul 11 2022 Richard Hughes <richard@hughsie.com> 1.8.2-1 - New upstream release - Allow front-end clients to read the percentage property - Autoconnect the Redfish network device when rebooting the BMC - Copy the instance ID strings when incorporating devices - Do not generate a capsule header for the FMP GUID - Fix a regression for devices using the Atmel FLIP Bootloader - Show the get-details output when the device requirements fail - Simply quirk matching for i2c devices to speed up daemon startup - Use force-detach to bypass the DFU streaming check for camera devices - Wait for the System76 launch device to re-enumerate if already unlocked - And, many more devices supported * Fri May 27 2022 Richard Hughes <richard@hughsie.com> 1.8.1-1 - New upstream release - Accurately return the last-set status to client tools - Add X-UsbReceiver as an update category with icon usb-receiver - Allow clients to opt-in to showing updates with user-solvable problems - Be more resilient when restarting the Redfish BMC - Do not mark all Redfish updates as UPDATABLE - Export the system and device battery levels on the D-Bus interface - Fix a critical warning on failed modem update - Fix regression when probing PS175 devices - And, many more devices supported * Thu Apr 28 2022 Richard Hughes <richard@hughsie.com> 1.8.0-1 - New upstream release - Add coSWID and uSWID parsers to libfwupdplugin for initial SBoM support - Add new HSI attributes for the AMD PSP and various other system protections - Add support for Corsair Sabre RGB PRO and Slipstream USB receiver - Add support for FlatFrog devices - Add support for Genesys GL3521 and GL3590 hubs - Add support for Google Servo Dock - Add support for Logitech M550, M650 and K650 - Add support for more ELAN fingerprint readers - Add support for more integrated Wacom panels - Add support for more NovaCustom machines - Add support for more StaLabs StarLite machines - Add support for more Tuxedo laptops - Add support for System76 launch_lite_1 - Add support for the Quectel EM05 - Add the runtime fwupd-efi version as a firmware requirement - Allow Capsule-on-Disk to work in more cases - Allow 'fwupdmgr install' to install a specified firmware version - Check the update protocol exists when checking requirements - Correctly probe USB-2 hubs with more than 7 ports - Do not add the Windows compatibility ID to capsule devices - Do not throw away the TPM eventlog when uploading to the LVFS - Export the version_lowest_raw value correctly - Fix several small memory leaks - Mark the ME region device locked if it is read only - Only show the CLI time remaining for predictable status phases - Respect the NO_COLOR env variable - Restart the BMC after installing BCM updates - Show the device serial number and instance IDs by default - Support dumping the MTD image to a firmware blob - Use the correct icon automatically for more hardware * Tue Apr 05 2022 Richard Hughes <richard@hughsie.com> 1.7.7-1 - New upstream release - Add signed and unsigned payload metadata to more devices - Allow overriding the detected machine type - Allow quirking the flashrom flash size - Do not add the backup BMC device as it shares the same GUIDs - Do not allow the DBX update for broken firmware versions - Don't export USB4 host controllers if they do not have unique GUIDs - Fix the TPM eventlog replay for Intel TXT machines - Never send the DeviceChanged signal with invalid data - Return the correct error when there is no GPIO device to open - Show the update message and update image in front end tools - Support the new PENDING upower device states * Fri Feb 25 2022 Richard Hughes <richard@hughsie.com> 1.7.6-1 - New upstream release - Add a flag to indicate the device has a signed or unsigned payload - Add a simple plugin to enumerate (but not update) SCSI hardware - Allow assigning issues to devices for known high priority problems - Do not run fwupd-refresh automatically in containers - Do not show a warning if the TPM eventlog does not exist - Do not show TSS2 warning messages by default - Fix a critical warning when loading an empty TPM eventlog item - Fix a logic error when adding the community warning in fwupdmgr - Fix loading flashrom devices in coreboot mode - Fix the error handling when updating USB4 retimers - Modify the AT retry behavior to fix getting the firmware branch - Parse the MTD firmware version using the defined GType - Show the user when devices are not updatable due to inhibits - Skip probing the Dell DA300 device to avoid a warning - Try harder to convert to a version into a correct semver - Use multiple checksums when there are no provided artifacts * Mon Feb 07 2022 Richard Hughes <richard@hughsie.com> 1.7.5-1 - New upstream release - Add a flag to indicate the firmware is not provided by the vendor - Allow marking a device as End-of-Life by the OEM vendor - Be more robust by retrying IPMI transactions on servers - Change the expired Redfish password when required - Fall back to the ARM Device Tree 'compatible' data when required - Fix a ModemManager segfault on startup for some MBIM-QDU devices - Fix a possible dell-dock segfault at startup - Fix compiling with new versions of efivar - Fix the Nordic bootloader type detection - Fix USB4 retimer enumeration - Show results when calling get-details if failing requirements - Uninhibit the modem using ModemManager after upgrade * Thu Jan 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 1.7.4-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Thu Jan 13 2022 Richard Hughes <richard@hughsie.com> 1.7.4-1 - New upstream release - Add firmware branch support for ModemManager devices - Allow fwupdtool to be run as the non-root user in more cases - Assign the Logitech bulkcontroller update interface correctly - Do not allow UEFI updates when the laptop lid is closed - Do not autoload ipmi-si to avoid warning on non-server hardware - Do not show a critical warning for a weird TPM event log - Fix waiting for USB devices when using Windows - Ignore non-PCI NVMe devices - Show why more devices are not marked as updatable * Mon Dec 13 2021 Richard Hughes <richard@hughsie.com> 1.7.3-1 - New upstream release - Add a sync-bkc subcommand to ensure a known set of firmware versions - Add support for most Nordic Semiconductor nRF Secure devices - Add the CFI JEDEC instance ID if using the vendor-extended version - Do not wait for a USB runtime if will-disappear is set - Enable the MOTD integration when using pam_motd - Fix DFU regression when merging the FuProgress work - Fix VLI VL820Q7 detection to fix flashing of the Lenovo TBT3 dock - Ignore a USB error for STM32 attach when the device goes away - Make the plugin startup order deterministic - Set Thunderbolt ports offline on host controller - Wait for the System76 Launch device to come back from DFU mode * Fri Nov 19 2021 Richard Hughes <richard@hughsie.com> 1.7.2-1 - New upstream release - Add a new HSI check that PCR registers 0-7 are not empty - Add support for exported MTD block devices - Export the component release ID over DBus - Fix a DFU crash if the attach failed due to a hardware fault - Fix a Redfish crash when specifying a URL without a port - Fix CLI downloads when using fwupdmgr --ipfs - Inhibit thunderbolt devices to correctly use UPDATABLE_HIDDEN - Remove support for the SoloKey and ChaosKey devices - Set SSL_VERIFYHOST=0 when using Redfish to fix OpenBMC auth - Skip UEFI devices that fail coldplug - Speed up the daemon startup by ~40% by doing less at startup * Sat Nov 06 2021 Adrian Reber <adrian@lisas.de> - 1.7.1-2 - Rebuilt for protobuf 3.19.0 * Mon Nov 01 2021 Richard Hughes <richard@hughsie.com> 1.7.1-1 - New upstream release - Allow specifying 'fwupdmgr device-test foo --json' for unattended testing - Show changes in HSI attributes when using 'fwupdmgr security' - Show the user a warning if updating may affect full-disk-encryption - Show translated firmware release notes when provided - Support loading remotes from /var/lib/fwupd/remotes.d - Fix a CCGX regression when loading firmware - Fix a potential crash when dumping Parade devices - Fix the CSME CVE detection for new generations - Handle EPERM when running the self tests on systems with IPMI - Mark as SUPPORTED even if on battery power - Only save the HSI attributes to the database if different - Raise the client timeout value from 25 seconds to fix Redfish startup - Redirect the old HSI links to the correct place - Set device time and timezone for logitech bulkcontroller devices - Set the verfmt of the returned device when the daemon device is unset * Mon Oct 25 2021 Adrian Reber <adrian@lisas.de> - 1.7.0-2 - Rebuilt for protobuf 3.18.1 * Wed Oct 06 2021 Richard Hughes <richard@hughsie.com> 1.7.0-1 - New upstream release - Add more supported PixArt and StarBook coreboot devices - Add support for Synaptics CAPE, Elan FP readers and Logitech Bolt hardware - Allow adding GUIDs to each HSI security attribute - Allow waiting for multiple devices to replug - Create Redfish user accounts automatically using IPMI - Make the SuperIO ports and timeouts specific to the DMI model - Show HSiLevel=0 attributes in JSON security output - Use a per-device global percentage completion - Write the UX image upside down to fix some UEFI firmware * Fri Sep 24 2021 Richard Hughes <richard@hughsie.com> 1.6.4-1 - New upstream release - Abort on invalid SREC files early to avoid a fuzzing timeout - Allow overriding the quirks directory at runtime - Fix a regression in flashing the Dell dock - Fix probing the Dell TPM - Show HSiLevel=0 attributes in JSON security output * Tue Aug 10 2021 Richard Hughes <richard@hughsie.com> 1.6.3-1 - New upstream release - Disable the uefi_capsule plugin if Redfish coldplug succeeded - Fix an elantp crash when starting the daemon - Fix detection of 8Bitdo wireless usb adapter - Fix writing large redfish firmware files * Mon Aug 02 2021 Richard Hughes <richard@hughsie.com> 1.6.2-1 - New upstream release - Add a plugin to check Lenovo firmware settings - Add support for CapsuleOnDisk and installing UEFI updates from GRUB - Automatically connect the BMC network interface at startup - Disable all UX capsules for Lenovo hardware - Do not assume the metainfo file is NUL-terminated - Do not save invalid files on LVFS server error - Fix a VLI regression when installing VL820Q7 firmware - Fix enumeration of the Synaptics Prometheus config child - Fix version number for legacy Wacom Bluetooth modules - Show the user how to switch out of Wacom tablet Android-mode - Work around a XCC-ism on Lenovo hardware * Wed Jul 21 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.6.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild * Mon Jun 14 2021 Richard Hughes <richard@hughsie.com> 1.6.1-1 - New upstream release - Add generic ModemManager support for PCI based modems - Add initial support for USB4 module in the Dell dock - Add support for sibling requirements - Add support for the ACPI PHAT table - Ask the user to confirm all CLI actions - Do not prevent firmware updates on desktop hardware - Do not show an invalid DFU warning on attach - Fall back to binary files when flashing STM32 hardware - Fix a critical warning when downloading files - Fix a regression in updating the WD19TB dock - Fix GUID generation on pixart hardware - Fix the VLI i2c device enumeration, e.g. MSP430 - Follow HTTP 3XX redirects when downloading files - Force the device locker to close() an aborted open() - Only lock fwupdtool when loading the engine - Read current Wacom firmware index before finding image to write - Support binary artifact resources in cabinet archives - Support mirroring the detach and update images - Switch lock directory from /var/run to /run/lock - Use GProxyResolver to get the system proxy setting for a given URL * Wed Apr 28 2021 Richard Hughes <richard@hughsie.com> 1.6.0-1 - New upstream release * Wed Apr 14 2021 Andrew Thurman <ajtbecool@gmail.com> 1.5.9-2 - Backport https://github.com/fwupd/fwupd/pull/3144 to fix https://bugzilla.redhat.com/show_bug.cgi?id=1949491 * Tue Apr 13 2021 Richard Hughes <richard@hughsie.com> 1.5.9-1 - New upstream release - Avoid runtime warning in dfu-tool - Detect address overflow when parsing invalid Intel HEX files - Do not timeout when bluez fails to start - Fix a crash when checking if the dbx update is safe to apply - Fix a possible crash if the user set WacomI2cFlashBlockSize manually - Fix array access when using fwupmgr verify-update - Include crt0 for arm and aarch64 that add a SBAT section - Retry the request to fix enumeration failure of Synaptics CXAudio - Set device activation requirement correctly in all cases - Set dual-bank property on more Lenovo display hardware - Tweak the SBAT output for a vendor string * Wed Mar 24 2021 Richard Hughes <richard@hughsie.com> 1.5.8-1 - New upstream release - Add D501 Baklava device support - Allow enabling plugins only matching a specific HwId - Check pixart firmware compatibility with hardware before flashing - Correct a thunderbolt assertion if kernel failed FW read - Correctly erase STM32 devices when transfer size is less than sector size - Detect SREC overflow to avoid adding ~4GB of 0xFF padding - Do not show a critical error when flashing footer-less binary files - Don't allow device updates while needing activation - Fix a regression in the elantp defined IAP start address - Fix a regression where activate stopped working - Fix firmware update of pointing device on Lenovo ThinkPad Nano - Fix the HSI plugin 'Disabled' state - Fix the quirk key name for the Lenovo HDMI with power - Fix writing to the GD32VF103 bootloader - Only call elantp->detach() when writing a firmware blob - Prompt for unlock keypress if reset command is blocked - Remove the Hughski public key - Show a warning when parsing invalid quirk files - Support for GATT characteristic signals/notifications - Support more than one protocol for a given device - Updated StarLabs GUIDs - Wait a few ms for the Logitech hardware to settle after detach * Tue Mar 02 2021 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.5.7-2 - Rebuilt for updated systemd-rpm-macros See https://pagure.io/fesco/issue/2583. * Tue Feb 23 2021 Richard Hughes <richard@hughsie.com> 1.5.7-1 - New upstream release - Add initial support for Bluez bluetooth devices - Add more supported pixart devices - Add support for the RTD21xx HDMI converter - Convert MBR types to GPT GUIDs to help find the ESP - Drop unused heap pages after startup has completed - Ensure SBAT metadata is added correctly - Only allow verify-update for plugins that support CAN_VERIFY * Tue Feb 16 2021 Richard Hughes <richard@hughsie.com> 1.5.6-1 - New upstream release - Add SBAT metadata to the fwupd EFI binary - Add support for GD32VF103 as found in the Longan Nano - Add support for RMI PS2 devices - Add support for the Starlabs LabTop L4 - Add support for the System76 Keyboard - Allow downloading firmware from IPFS - Be more paranoid when parsing ASCII buffers and devices - Check if the fwupd BootXXXX entry exists on failure - Do not allow flashing using flashrom if BLE is enabled - Do not allow Lenovo hardware to install multiple capsules - Do not show Unknown [***] for every client connection - Fix dnload wBlockNum wraparound for ST devices - Fix OOM when using large ArchiveSizeMax values - Fix several crashes spotted by AddressSanitizer - Fix several places where the Goodix MOC plugin could crash - Include the PCR0 to the report metadata - Install the UX data into an optional subpacakge - Report the lockdown status from UEFI and SuperIO plugins - Show a console warning if the system clock is not set * Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.5.5-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild * Mon Jan 11 2021 Richard Hughes <richard@hughsie.com> 1.5.5-1 - New upstream release - Add a plugin to update PixArt RF devices - Add new hardware to use the elantp and rts54hid plugins - Detect the AMD TSME encryption state for HSI-4 - Detect the AMI PK test key is not installed for HSI-1 - Fix flashing a fingerprint reader that is in use - Fix several critical warnings when parsing invalid firmware - Fix updating DFU devices that use DNLOAD_BUSY - Ignore the legacy UEFI OVMF dummy GUID - Make libfwupd more thread safe to fix a crash in gnome-software - Never show unprintable chars from invalid firmware in the logs * Wed Dec 16 2020 Richard Hughes <richard@hughsie.com> 1.5.4-1 - New upstream release - Add Maple Ridge Thunderbolt firmware parsing support - Allow creating FMAP and Synaptics firmware using builder.xml - Allow using fwupdtool as non-root for firmware commands - Do not trust the Block.HintSystem boolean for ESP filtering - Fix a memory leak when parsing Synaptics firmware - Fix a possible crash when reading the Goodix MOC USB request - Fix possible crashes when parsing invalid firmware * Tue Dec 08 2020 Richard Hughes <richard@hughsie.com> 1.5.3-1 - New upstream release - Add a UEFI quirk for Star Labs Lite Mk III - Add the device firmare ID for serio class hardware - Allow setting the GMainContext when used for sync methods - Allow the client to send legacy PKCS7 and GPG signatures - Export the driver name from FuUdevDevice - Fix a possible critical warning due to missing retval - Fix the endianness for the CRC check in bcm57xx - Make sure the correct interface number is used for QMI - Mark more user-visible strings as translatable - Restrict loading component types of firmware - Validate ModemManager firmware update method combinations * Mon Nov 23 2020 Richard Hughes <richard@hughsie.com> 1.5.2-1 - New upstream release - Add a flag to indicate if packages are supported - Add a plugin for the Pinebook Pro laptop - Allow components to set the icon from the metadata - Fall back to FAT32 internal partitions for detecting ESP - Fix detection of ColorHug version on older firmware versions - Fix reading BCM57XX vendor and device ids from firmware - Fix replugging the MSP430 device - Fix sync method when called from threads without a context - Ignore an invalid vendor-id when adding releases for display - Improve synaptics-mst reliability when writing data - Install modules-load configs in the correct directory - Notify the service manager when idle-quitting - Only download the remote metadata as required - Remove HSI update and attestation suffixes - Restore recognizing GPG and PKCS7 signature types in libfwupd - Set the SMBIOS chassis type to portable if a DT battery exists - Switch from libsoup to libcurl for downloading data