| Changelog |
* Mon Oct 26 2020 David Cantrell <dcantrell@redhat.com> - 1.2-1
- For BUILDTYPE=release, generate the correct type of changelog
- Minor logic error in submit-koji-builds.sh
- Fix reading existing spec file in submit-koji-builds.sh
- Bump development build version to 1.2
- Use is_rebase() in the 'upstream' inspection
- Use rpmtdSetIndex() and rpmtdGetString() in get_header_value()
- Add get_rpmtag_fileflags() to files.c and call from extract_rpm()
- Use correct Version and Release values in download_build()
- #include <rpm/rpmfiles.h> -> #include <rpm/rpmfi.h>
- Add the 'config' inspection to librpminspect
- Rephrase reporting messages in the 'config' inspection
- Add the 'doc' inspection to librpminspect
- Update TODO list
- Minor updates to try and make gate.sh more reliable
- Add config and doc to the inspections list in generic.yaml
- Rename the '%files' inspection to 'files' (#194)
- Modify baseclass.py to allow 'before' and 'after' NVR tuples
- Use the after tuple to override the NVR in test_abidiff.py
- Use the after tuple to override the NVR in test_upstream.py
- Write rpminspect output to a file in the test suite
- Add 28 test cases for the 'config' inspection
- Fix the errors in the 'config' inspection found by the test suite
- Fix Python problems in the test suite reported by black and flake8
- Add Makefile targets for black and flake8
- One more formatting issue reporting by Python black in test_config.py
- More 'python black' formatting errors reported for test_config.py
- https://mandoc.bsd.lv -> http://mandoc.bsd.lv
- Add a -D/--dump-config option to rpminspect(1)
- Use global reported variable in 'config' inspection
- Fix reporting errors in the 'doc' inspection
- Add test_doc.py with 'doc' inspection test cases
- Ignore flake8 W291 in test_doc.py where we explicitly want whitepsace.
- Add init_rebaseable() to librpminspect
- Check the rebaseable list in is_rebase() in librpminspect
- Update TODO list
- Define a new GitHub Action using utils/gate.sh
- Update the README.md file
- shellcheck fixes for utils/gate.sh
- Use utils/find-ninja.sh to determine what ninja-build command to use
- Install fedora-packager for the gate.yml GitHub Action
- Remove before and after variables from gate.sh; unused
- Remove unnecessary basename() calls in inspect_upstream.c
- Do not assume an or bn contain strings in is_rebase() (#196)
- Adjust what things run during with GitHub Actions
- Add get_rpm_header_string_array() to librpminspect
- Replace init_source() with get_rpm_header_string_array() in
inspect_upstream.c
- free() allocated output string in inspect_changelog.c on errors
- s/10240/16384/ in archive_read_open_filename() call in unpack.c
- Add the 'patches' inspection to librpminspect
- Add uncompress_file() to librpminspect
- Add filecmp() and use that in place of zcmp/bzcmp/xzcmp
- README.md updates
- Restrict some GitHub Actions to source code and test suite changes.
- Only enable lz4 compression if ARCHIVE_FILTER_LZ4 is defined
- Go ahead and wrap the rest of the libarchive compression filters
- s/class Test/class /g
- Make sure uncompress_file() supports xz compression
- Handle more compressed file MIME types.
- Add test_changedfiles.py to the test suite.
- Add test_patches.py with test cases for the 'patches' inspection
- flake8 fixes in the test suite
- Python format fixes for test_changedfiles.py
- Python format fixes in test_patches.py
- More Python format fixes for test_patches.py
- Remove unnecessary 'a' in DESC_PATCHES
- Better explanation as to why the EmptyLicenseTag tests are skipped.
- Test suite cleanup; add rebase= and same= to TestCompareSRPM
- Black formatting fixes for the test suite.
- Remove unused imports in test_upstream.py
- Revert black fixes for test_config.py
- Fix my email address in test suite source files.
- Support single package URLs for before and after builds (#190)
- Handle invalid/missing RPMs in get_product_release()
- Use warnx(), errx(), and err() in src/rpminspect.c
- Modify submit-koji-builds.sh to pick up all pkg-git branches.
- Update the rpminspect.1 man page to reflect current status.
- Update translation template files in po/
- Support relative directory paths for the -w option (#188)
- Implement the 'virus' inspection and add test cases for it.
- Update po/ template files
- Python formatting fixes for test_virus.py
- Update the osdeps/*/reqs.txt files.
- More osdeps updates for the clamav needs
- Install 'xz' for the 'style' GitHub Action
- Fix a variety of small memory leaks in librpminspect
- Stop the freshclam service for the Ubuntu gate job
- Support slightly older versions of libclamav in inspect_virus.c
- Add the 'politics' inspection to librpminspect.
- In tearDown() in the test suite, call rpmfluff clean() methods
- Add test_politics.py with 'politics' inspection test cases
- Python black format fixes for test_politics.py
- 'it should added' -> 'it should be added'
- Increase the runtime timeout for test_virus.py
- Install the timeout decorator on all OSes in our GitHub Actions
- Install timeout-decorator with pip, not timeout
- Expand librpminspect with support for SHA-224, SHA-384, and SHA-512
- Define DEFAULT_MESSAGE_DIGEST in constants.h and use that.
- Replace some fprintf()/fflush() calls with warn()/warnx() calls
- Rename the 'DT_NEEDED' inspection to 'dsodeps'
- Rename 'LTO' inspection to 'lto'
- Update translation template and fix two incorrect error strings.
- Note all valid message digests in data/politics/GENERIC
- Improve reporting in the patches inspection
- Only fail 'changedfiles' for VERIFY and higher results
- If 'removedfiles' only reports INFO messages, pass the inspection
- If 'addedfiles' only reports INFO results, pass the inspection
- If 'patches' only reports INFO results, pass the inspection
- No need to check value of allowed in permissions_driver()
- Do not let INFO results fail the 'doc' inspection.
- Do not let all INFO results in 'upstream' fail the inspection
- Fix RPMFILE_FLAGS handling for %config files (#221)
- Still report file changes in the 'config' inspection for rebases
- Correctly check RPMFILE_DOC flags in the 'doc' inspection
- Include rpm/rpmfi.h insted of rpm/rpmfiles.h
- Only check regular files and symlinks in the 'doc' inspection
- Remove unnecessary assert() statements in filecmp()
- Remove incorrect warnx() reportings based on filecmp() return value
- Exclude man pages from the 'doc' inspection
- Honor the -a command line option for downloads as well as runtime
(#233)
- Allow optional 'commands' block in the config file
- Fix assorted non-critical memory leaks
- Remove unnecessary warn() after a failed stat()
- Additional memory fixes for the abidiff inspection (#244)
- Free ELF symbol names list in find_lto_symbols() before return
- Followup to the memory fixes for read_abi() and free_abi()
- Prevent invalid pointer dereferencing in invalid result in 'patches'
(#245)
- Avoid reusing the same abi_pkg_entry_t struct in read_abi()
- Allow a set of excluded path prefixes in 'pathmigration'
- Fix the YAML parsing for the pathmigration block
- Document the BRANCHES variable for 'make koji'
- Include the .asc file when submitting new Koji builds (#191)
- Include the .asc file in the spec file
* Mon Oct 26 2020 David Cantrell <dcantrell@redhat.com> - 1.2-1
- For BUILDTYPE=release, generate the correct type of changelog
- Minor logic error in submit-koji-builds.sh
- Fix reading existing spec file in submit-koji-builds.sh
- Bump development build version to 1.2
- Use is_rebase() in the 'upstream' inspection
- Use rpmtdSetIndex() and rpmtdGetString() in get_header_value()
- Add get_rpmtag_fileflags() to files.c and call from extract_rpm()
- Use correct Version and Release values in download_build()
- #include <rpm/rpmfiles.h> -> #include <rpm/rpmfi.h>
- Add the 'config' inspection to librpminspect
- Rephrase reporting messages in the 'config' inspection
- Add the 'doc' inspection to librpminspect
- Update TODO list
- Minor updates to try and make gate.sh more reliable
- Add config and doc to the inspections list in generic.yaml
- Rename the '%files' inspection to 'files' (#194)
- Modify baseclass.py to allow 'before' and 'after' NVR tuples
- Use the after tuple to override the NVR in test_abidiff.py
- Use the after tuple to override the NVR in test_upstream.py
- Write rpminspect output to a file in the test suite
- Add 28 test cases for the 'config' inspection
- Fix the errors in the 'config' inspection found by the test suite
- Fix Python problems in the test suite reported by black and flake8
- Add Makefile targets for black and flake8
- One more formatting issue reporting by Python black in test_config.py
- More 'python black' formatting errors reported for test_config.py
- https://mandoc.bsd.lv -> http://mandoc.bsd.lv
- Add a -D/--dump-config option to rpminspect(1)
- Use global reported variable in 'config' inspection
- Fix reporting errors in the 'doc' inspection
- Add test_doc.py with 'doc' inspection test cases
- Ignore flake8 W291 in test_doc.py where we explicitly want whitepsace.
- Add init_rebaseable() to librpminspect
- Check the rebaseable list in is_rebase() in librpminspect
- Update TODO list
- Define a new GitHub Action using utils/gate.sh
- Update the README.md file
- shellcheck fixes for utils/gate.sh
- Use utils/find-ninja.sh to determine what ninja-build command to use
- Install fedora-packager for the gate.yml GitHub Action
- Remove before and after variables from gate.sh; unused
- Remove unnecessary basename() calls in inspect_upstream.c
- Do not assume an or bn contain strings in is_rebase() (#196)
- Adjust what things run during with GitHub Actions
- Add get_rpm_header_string_array() to librpminspect
- Replace init_source() with get_rpm_header_string_array() in
inspect_upstream.c
- free() allocated output string in inspect_changelog.c on errors
- s/10240/16384/ in archive_read_open_filename() call in unpack.c
- Add the 'patches' inspection to librpminspect
- Add uncompress_file() to librpminspect
- Add filecmp() and use that in place of zcmp/bzcmp/xzcmp
- README.md updates
- Restrict some GitHub Actions to source code and test suite changes.
- Only enable lz4 compression if ARCHIVE_FILTER_LZ4 is defined
- Go ahead and wrap the rest of the libarchive compression filters
- s/class Test/class /g
- Make sure uncompress_file() supports xz compression
- Handle more compressed file MIME types.
- Add test_changedfiles.py to the test suite.
- Add test_patches.py with test cases for the 'patches' inspection
- flake8 fixes in the test suite
- Python format fixes for test_changedfiles.py
- Python format fixes in test_patches.py
- More Python format fixes for test_patches.py
- Remove unnecessary 'a' in DESC_PATCHES
- Better explanation as to why the EmptyLicenseTag tests are skipped.
- Test suite cleanup; add rebase= and same= to TestCompareSRPM
- Black formatting fixes for the test suite.
- Remove unused imports in test_upstream.py
- Revert black fixes for test_config.py
- Fix my email address in test suite source files.
- Support single package URLs for before and after builds (#190)
- Handle invalid/missing RPMs in get_product_release()
- Use warnx(), errx(), and err() in src/rpminspect.c
- Modify submit-koji-builds.sh to pick up all pkg-git branches.
- Update the rpminspect.1 man page to reflect current status.
- Update translation template files in po/
- Support relative directory paths for the -w option (#188)
- Implement the 'virus' inspection and add test cases for it.
- Update po/ template files
- Python formatting fixes for test_virus.py
- Update the osdeps/*/reqs.txt files.
- More osdeps updates for the clamav needs
- Install 'xz' for the 'style' GitHub Action
- Fix a variety of small memory leaks in librpminspect
- Stop the freshclam service for the Ubuntu gate job
- Support slightly older versions of libclamav in inspect_virus.c
- Add the 'politics' inspection to librpminspect.
- In tearDown() in the test suite, call rpmfluff clean() methods
- Add test_politics.py with 'politics' inspection test cases
- Python black format fixes for test_politics.py
- 'it should added' -> 'it should be added'
- Increase the runtime timeout for test_virus.py
- Install the timeout decorator on all OSes in our GitHub Actions
- Install timeout-decorator with pip, not timeout
- Expand librpminspect with support for SHA-224, SHA-384, and SHA-512
- Define DEFAULT_MESSAGE_DIGEST in constants.h and use that.
- Replace some fprintf()/fflush() calls with warn()/warnx() calls
- Rename the 'DT_NEEDED' inspection to 'dsodeps'
- Rename 'LTO' inspection to 'lto'
- Update translation template and fix two incorrect error strings.
- Note all valid message digests in data/politics/GENERIC
- Improve reporting in the patches inspection
- Only fail 'changedfiles' for VERIFY and higher results
- If 'removedfiles' only reports INFO messages, pass the inspection
- If 'addedfiles' only reports INFO results, pass the inspection
- If 'patches' only reports INFO results, pass the inspection
- No need to check value of allowed in permissions_driver()
- Do not let INFO results fail the 'doc' inspection.
- Do not let all INFO results in 'upstream' fail the inspection
- Fix RPMFILE_FLAGS handling for %config files (#221)
- Still report file changes in the 'config' inspection for rebases
- Correctly check RPMFILE_DOC flags in the 'doc' inspection
- Include rpm/rpmfi.h insted of rpm/rpmfiles.h
- Only check regular files and symlinks in the 'doc' inspection
- Remove unnecessary assert() statements in filecmp()
- Remove incorrect warnx() reportings based on filecmp() return value
- Exclude man pages from the 'doc' inspection
- Honor the -a command line option for downloads as well as runtime
(#233)
- Allow optional 'commands' block in the config file
- Fix assorted non-critical memory leaks
- Remove unnecessary warn() after a failed stat()
- Additional memory fixes for the abidiff inspection (#244)
- Free ELF symbol names list in find_lto_symbols() before return
- Followup to the memory fixes for read_abi() and free_abi()
- Prevent invalid pointer dereferencing in invalid result in 'patches'
(#245)
- Avoid reusing the same abi_pkg_entry_t struct in read_abi()
- Allow a set of excluded path prefixes in 'pathmigration'
- Fix the YAML parsing for the pathmigration block
- Document the BRANCHES variable for 'make koji'
- Include the .asc file when submitting new Koji builds (#191)
- Include the .asc file in the spec file
* Fri Sep 11 2020 David Cantrell <dcantrell@redhat.com> - 1.1-1
- Formatting fixes in Makefile help output
- Begin config file restructuring starting with rpminspect-data-generic
- Support multiple configuration files.
- Docs work in progress.
- Only fail the annocheck inspection for RESULT_VERIFY.
- Read debuginfo if available when running the 'annocheck' inspection.
- Add the '%files' inspection to librpminspect
- Add __attribute__((__sentinel__)) to the run_cmd() prototype
- Add test suite cases for the '%files' inspection.
- Added the 'types' inspection to compare MIME types between builds.
- Update TODO file
- Update the MISSING file
- s/rpminspect.yaml/generic.yaml/ in the Makefile and README
- Skip debuginfo and debugsource packages in the 'types' inspection
- Add test_types.py to the test suite
- Note the 'types' inspection generic.yaml
- Modify add_entry() in init.c to skip duplicate entries
- Start GitHub Action workflow files for rpminspect.
- Install meson in ci-ubuntu.yml
- Change 'nls' option in meson_options.txt to a boolean
- Install gettext for ci-ubuntu
- Add more build dependencies to ci-ubuntu.yml
- Drop the 'method' parameter from dependency() lines in meson.build
- Split xmlrpc libs to separate dependency() lines in meson.build
- More xmlrpc updates for meson.build and lib/meson.build
- Try to support systems with xmlrpc-c without the pkgconfig file.
- Changes to build on Ubuntu, specifically the GitHub Actions system
- Syntax error in ci-ubuntu.yml
- Add ci-fedora.yml for GitHub Action CI on Fedora
- Fix errors in ci-fedora.yml
- Put all of the ci-ubuntu.yml steps in ci-ubuntu.yml
- Remove install-libmandoc.sh and ubuntu-pkgs.sh helper scripts.
- Install python3-setuptools in ci-ubuntu.yml
- Install rpm-build in ci-fedora.yml
- Install libxmlrpc-core-c3-dev in ci-ubuntu.yml
- Disable ci-ubuntu.yml for now, enable code coverage in ci-fedora.yml
- Remove Travis-CI files.
- coverage fixes for ci-fedora.yml
- Install git in ci-fedora.yml
- Enable manual dispatching of the CI on Fedora tests
- Remove actionspanel thing for GitHub Actions, drop Coveralls block
- Comment the ci-fedora-yaml file
- Fix the 'elf' inspection and test_elf.py on Ubuntu
- Enable the ci-ubuntu GitHub Action again
- Check all return values of getcwd()
- Ignore installed Python modules with pip3 in ci-ubuntu.yml
- Build 'execstack' test program with -Wl,-z,lazy
- Add ci-centos8.yml to enable CI on CentOS 8 as a GitHub Action
- s/centos8:latest/centos8/g
- Trying 'container: centos:centos8'
- Drop 'sudo' from ci-centos8.yml
- Rename README to README.md
- Enable GitHub Action for CI on CentOS 7
- Drop -I from the pip install line in ci-centos7.yml
- Use the 'make instreqs' target for install test suite deps.
- Add back 'dnf -y install 'dnf-command(builddep)'' to ci-fedora.yml
- Nope, that doesn't do it. Just install make in ci-fedora.yml first
- More 'make instreqs' fixes.
- s/scripts/utils/g in the Makefile
- s/TOPDIR/topdir/g in the Makefile
- Install make in ci-centos7.yml
- Move REQS and PIP lists out of the Makefile to files in osdep/
- '^$$' -> '^$'
- Slightly different sourcing of the osdep/ files
- Set OS using := in the Makefile
- Make the reqs.txt files in osdep/ contain all deps
- linux-headers -> linux-headers-$(uname -r) for Ubuntu
- Remove html401-dtds from osdep/centos8/reqs.txt
- Use `` instead of $() since this list goes through make(1)
- Does $(shell uname -r) work in this case?
- More osdep/ work and simplification.
- Rename 'osdep' to 'osdeps'
- meson patches for opensuse
- Move mandoc installation to post.sh in osdep/ubuntu
- Add GitHub Action for CI on OpenSUSE
- opensuse:latest -> opensuse/leap:latest
- Install tar in ci-opensuse.yml
- Install gzip in ci-opensuse.yml
- More fixes for ci-opensuse.yml
- Small fixes to determine-os.sh
- ci: Add Python linting jobs
- ShellCheck fixes for the regress/ scripts
- ci: Add ShellCheck to lint shell scripts
- Adjust how the Makefile reports unknown operating system.
- Just check $ID in determine-os.sh for opensuse
- Use pip for PIP_CMD on opensuse-leap
- Update the centos images before doing anything else.
- Install curl in opensuse-leap
- Get 'rc' from Fedora on opensuse and copy it to /usr/local
- Install kernel-default-devel for opensuse CI
- Move the 'uses' part of the centos CI jobs to the first step
- ShellCheck fixes for the utils/ scripts.
- Some flake8 fixes in test/, using yapf
- Combine all of the GitHub Actions CI runs in to ci.yml
- Manually install rpmfluff on CentOS 7; pip is failing here
- Use rpmfluff-0.5.7 explicitly for centos7
- Use rpmfluff-0.5.6 on centos7
- OK, let's try rpmfluff-0.5 for centos7
- Last try, rpmfluff-0.5.4.1 for centos7
- Back to trying to manually install rpmfluff for centos7
- Style the Python code with Black
- Add the Black formatting commit to blame revision ignore list
- OK, just copy rpmfluff.py in place
- Make sure to manually install rpmfluff-0.5.7.1 for centos7
- Don't assume we have a header or even a list of files (#161)
- python: flake8: drop * imports
- python: flake8: wrap long lines to less than 100 characters
- python: flake8: drop unused imports
- python: flake8: remove unused local variables
- python: flake8: add PEP8 whitespace
- python: flake8: mark in-line bash scripts as raw strings
- python: rename several duplicate test cases
- ci: merge style workflows
- Adjust rpminspect.spec.in for file moves and default changes.
- Return the reallybadword to the metadata tests
- Adjust test_metadata.LosingVendorCompareKojiBuild to expect VERIFY
- The shared libmandoc check should not look for a static libmandoc
- Update the AUTHORS file
- Rename ipv6_blacklist to forbidden_ipv6_functions
- Rename stat-whitelist to fileinfo
- Rename 'caps_whitelist' to 'caps' and drop the use of 'whitelist'
- Rename abi-checking-whitelist/ to abi/ in /usr/share/rpminspect
- Rename 'version-whitelist/' to 'rebaseable/' in /usr/share/rpminspect
- Rename "political-whitelist/" to "politics/" in /usr/share/rpminspect
- Drop unnecessary method re-definitions in base test classes
- Use super() rather than explicitly calling the parent class
- Call configFile() on object instance rather than using the parent
class
- Upload coverage report to codecov
- Improve the error reporting for test result checking
- Convert to AUTHORS.md file, add Makefile target to generate it.
- Introduce the 'movedfiles' inspection and a lot of other fixes (#155)
- AUTHORS -> AUTHORS.md in rpminspect.spec.in
- Add basic tests for the filesize inspection
- Multiply the file size difference before dividing
- Update README.md
- Update README.md (more Markdown changes)
- Update POTFILES and rpminspect.pot
- chmod 0755 test_filesize.py
- tests: optionally check the result message
- tests: add further filesize tests for shrinking files
- inspect_filesize: drop extra - from the message about file shrinkage
- Enable 'permissions' inspect for single build analysis.
- Add 24 new test cases to cover the 'permissions' inspection.
- chmod 0755 test_permissions.py
- Make sure all RESULT_INFO results are set to NOT_WAIVABLE
- Fix some specific problems with the 'permissions' inspection.
- Pass "-r GENERIC" to rpminspect in the TestCompareKoji class
- Add 12 more permissions test cases for setuid file checks
- Update TODO list
- Update test_symlink.py tests for new waiver_auth values
- Add a fedora-rawhide job and renamed 'fedora' to fedora-stable
- Update the rpminspect.pot translation template
- Relicense librpminspect (lib/ and include/) as LGPL-3.0-or-later
- Ignore .tox/ subdirectory
- License the rpminspect-data-generic subpackage as CC-BY-4.0
- Add a copy of the Apache 2.0 license for the 5 files in librpminspect
- Update the License tag in the spec file and the %license lines
- Add debian-testing as a CI workflow; add missing osdeps files.
- Update determine-os.sh to handle Fedora stable and rawhide
- Drop the use of 'sudo' in ci.yml
- sudo required for Ubuntu CI job, install make for debian-testing
- See what $ID is set to in determine-os.sh
- Workaround a bug in meson 0.55.0 for Fedora CI jobs
- Add 'debian' catch to utils/determine-os.sh
- Rename 'osdeps/debian-testing/' to 'osdeps/debian/'
- Add opensuse-tumbleweed to the CI job list
- Add libmagic-dev to osdeps/debian/reqs.txt
- Fix memory corruption in init_rpminspect
- Add comment clarifying the License tag in the spec file.
- If check_results() raises AssertionError, dump the JSON output
- Fix test_changelog.py test cases that are failing.
- Fix UnbalancedChangeLogEditCompareKoji
- Handle rpm versions with x.y.z.w version numbers in test_symlinks.py
- Fix mandoc build problems in opensuse-tumbleweed CI job
- Install gcovr using pip on opensuse-tumbleweed
- Handle systems that lack pkg-config files for libelf and libcap
- Add archlinux CI job in GitHub Actions
- Forgot --noconfirm on the 'pacman -Syu' line.
- Add missing DESC_MOVEDFILES block to inspection_desc()
- More minor fixes to the Arch Linux CI job.
- Install gcovr with pip for the Arch Linux CI job.
- Support building on systems that lack <sys/queue.h>
- Add detection for <sys/queue.h> to meson.build
- Ensure an int is used for snprintf() in inspect_manpage_path()
- WIP: 'abidiff' inspection
- Only report permissions change if there is a mode_diff (#181)
- Fix -Werror failures in inspect_abidiff.c
- Add sl_run_cmd() to librpminspect.
- Add get_arches() to librpminspect
- WIP: abidiff inspection
- Some minor edits to the README.md file
- More minor updates to the README.md file
- Replace get_arches() with init_arches()
- Add test_addedfiles.py to the integration test suite
- Expand find_one_peer() to soft match versioned ELF shared libraries
- Add the beginnings of the 'abidiff' inspection code.
- Report out findings in the abidiff inspection.
- Update the test suite to cover rpmfluff 0.6
- libmandoc configure workaround needed on Debian too
- shellcheck fixes for the scripts in utils/
- Add abi.c, the code that reads in the ABI compat level files (#144)
- Be sure to close the open file before exiting init_fileinfo()
- Python formatting cleanups
- Add --diff to the Python format checker
- Add new setting to abidiff section of the config file
- Add -n/--no-rebase command line option to disable rebase detection
- Store size_threshold as a long int rather than a char *
- Check abidiff(1) results against the ABI compat level definitions
(#144)
- Add 'apt-get -y install libgcc-s1:i386' to pre.sh for Debian
- Add integration test cases for the abidiff inspection (#144)
- Add 'dpkg --configure -a' to pre.sh for debian
- Install libterm-readline-perl-perl for debian CI
- Install libabigail for Fedora and CentOS CI jobs
- libgcc-s1:i386 -> lib32gcc-s1 for debian CI
- Install libabigail for opensuse-leap, opensuse-tumbleweed, and arch CI
- Install libabigail for debian and ubuntu CI
- Install libabigail-dev for debian and ubuntu, not libabigail
- Install libabigail-tools on opensuse-leap and opensuse-tumbleweed
- Install libabigail-git for arch linux CI
- Move free_argv_table() to runcmd.c
- Install 'abigail-tools' for debian-testing and ubuntu CI
- Install libabigail using the Arch User Repo on arch CI
- Explain the osdeps/ subdirectory.
- No, just clone libabigail from git and build it manually on arch
- Add beginning of kmidiff inspection, put ABI functions in abi.c
- Read list of possible kernel executable filenames from the config
file.
- Drop abidiff_ and kmidiff_ from extra_args; add kernel_filenames
- Just call the abidiff and kmidiff extra args settings "extra_args"
- Define 'kmi_ignore_pattern' in the config file.
- Handle builds that lack all debuginfo packages (#186)
- Do not assume peer->after_hdr exists (#187)
- Store copy of original pointer in strsplit() to free at the end.
- Use mmap() and strsplit() in read_file() rather than a getline() loop
- Fix memory leaks in abi.c functions
- open() failure in readfile() is not fatal, just return NULL
- Add utils/gate.sh
- Have check_abi() pass back the ABI compat level found
- Update descriptions for abidiff and kmidiff inspections
- Hook up the kmidiff inspection.
- Use read_file() in init_fileinfo() and init_caps()
- Use read_file() in validate_desktop_contents()
- Use read_file() in disttag_driver()
- Adjust how init_fileinfo() and init_caps() iterate over file contents
- Fix 'tox -e format' style problems found.
- Avoid comparing elf files that are not shared libraries
- Support --kmi-whitelist in the kmidiff inspection
- Trim worksubdir from paths in reported abidiff and kmidiff commands
- Remove the kmi_ignore_pattern setting for the config file.
- Create include/queue.h to replace the _COMPAT_QUEUE blocks everywhere
- Update AUTHORS.md
- Report metadata changes for rebased packages as INFO
- Do not fail the specname inspection when given a non-SRPM
- For passing upstream inspections, do not report a remedy string.
- Do not fail the lostpayload inspections if it only gives INFO messages
- Clarify unapproved license message in the license inspection
- Use FOPEN_MAX for nopenfd parameter in nftw() calls
- Make sure to close open file descriptors from get_elf() calls.
- Include 'src' architecture in the rpminspect runs in gate.sh
- Make sure kmidiff is listed in the spec file
- TODO updates
- Update rpminspect.pot and POTFILES for translations
* Mon Jun 29 2020 David Cantrell <dcantrell@redhat.com> - 1.0-1
- Use this project's user.name and user.email for Koji builds
- Use YAML for the rpminspect configuration file and profiles
- Reduce the number if (null) prints in debug mode for shellsyntax
- Update README
- Fixes a ValueError if hostname has no periods
- Remove '#include <iniparser.h>' from rpminspect.h
- Install python3-pyyaml in the Docker test environment.
- Use fedora:rawhide for the Docker tests.
- Try multiple ways of finding the kernel development files in
test_kmod.py
- Syntax error in test_kmod.py
- Force kver in list iteration to a string.
- Update 'hardened' annocheck definition, add another LTO prefix
- Debugging output in inspect_lto.c
- In test_ownership.py, use the built rpminspect rather than a script.
- More debugging output in inspect_lto.c
- In find_lto_symbols(), start at SHT_PROGBITS instead of SHT_SYMTAB.
- In test_symlinks, use built rpminspect rather than a shell script.
- Use built executables in test_upstream.py tests rather than scripts.
- Add '%global __os_install_post %{nil}' to rpmfluff spec headers.
- Make sure man pages we expect gzipped are gzipped in test_manpage.py
- Set QA_SKIP_BUILD_ROOT=1 in %install in test_symlinks.py tests.
- Add '%global __arch_install_post %{nil}' to symlinks spec headers.
- Install kernel-core for the test suite.
- Find the kernel build directory in test/data/derp-kmod/Makefile
- Skip ELOOP symlink tests if rpm >= 4.15.90 is used
- Pass the kernel build directory to derp-kmod/Makefile from
test_kmod.py
- Install 'make' in the Docker test environment
- Support Linux 5.6.0 struct proc_ops in derp-kmod
- Final derp-kmod fixes for the 5.6.0 and higher kernels.
- rpminspect.conf -> rpminspect.yaml in rpminspect.spec.in
- Set default JVM byte code version to 43 in rpminspect.yaml
- Update the local test instructions to run individual test scripts.
- Report changed files as RESULT_INFO when rebasing packages (#150)
- Ignore missing XML entity definition errors (#148)
- Add some basic verbose output from rpminspect(1)
- Split 'emptyrpm' inspection in to 'lostpayload' and 'emptyrpm' (#147)
- Move _() usage for DESC_* macros to inspect.h
- Handle INSPECT_LOSTPAYLOAD in inspection_desc()
- Search correct files for POTFILES additions.
- Update POTFILES and rpminspect.pot template
- Add DESC_PATHMIGRATION and reformat the struct inspect for reading.
- Small update to the MISSING file.
- Install python3-devel for the test suite.
- Install libffi-devel for the test suite
- Use the rpm Python module in test_syslinks.py to get rpm version.
- Add check_results() to test/baseclass.py
- Report %changelog section differences as INFO (#123)
- Report dangling symlinks as INFO for now (#145)
- Add get_specfile_macros() and get_macros() to librpminspect (#152)
- Fix ELF_K_AR handling in get_elf_machine() (#153)
- Remove stray 7 from an #include line
- Don't worry about EM_BPF objects in ELF_K_AR file types (#153)
- Fix -fPIC loss/gain reporting in the elf inspection (#153)
- Support macros in the Release tag in the 'disttag' inspection (#152)
- Simplify the get_elf_section() function a bit.
- Do not report all after objects without -fPIC as having lost PIC
(#153)
- Drop eu-elfcmp(1) usage in the changedfiles inspection.
- Rename on_stat_whitelist() to on_stat_whitelist_mode(), fix some
errors.
- Add on_stat_whitelist_owner() and on_stat_whitelist_group()
- Ignore debug paths in the symlinks inspection.
- Install 'setup' in the Docker test image
- Add mock(1) in the Docker test environment.
- Remove DEBUG_PRINT for the config file name read in init.c
- Display errno value when getpwnam_r() or getgrnam_r() fail
- Handle missing users and groups from the system
- Add sssd-client to the Docker test environment
- More debugging output while working on Travis-CI problems
- Further Travis-CI debugging for the ownership inspection.
- Continuing to debug this problem in Travis-CI
- And continued Travis-CI test_ownership debugging...
- Fix problem constructing package download URLs in librpminspect.
- Only try to read the UID or GID in the ownership inspection.
- Update translation template file.
- Update po/POTFILES list
- Final getpwnam_r()/getgrnam_r() changes for whitelist.c
- Restrict RPM spec file macro gathering to %define and %global.
- If shdr in _get_elf_helper() is NULL, return NULL.
- s/%%/%/g in results.h
- Account for whitespace other than ' ' on Release: lines (#157)
- Add a new disttag test case to cover tab field separators.
- Ignore multiline macros in get_specfile_macros()
- Add more example data to test_disttag.py to cover recent bug reports.
- Add ignore_path() function to librpminspect
- Expand foreach_peer_file() with use_ignores parameter.
- Revert work-in-place changes in inspect_elf.c so the test suite
passes.
- Update the 'ignore' section in rpminspect.yaml
- Expand strreplace() to support removing substrings.
- Trim rpminspect working directory from annocheck(1) details.
- Skip debuginfo files in the annocheck inspection.
- If reltarget is "", do not try to further modify it (#159)
- Add manually-invoked regression testing scripts.
- BR libmandoc-devel >= 1.14.5
- BR libmandoc-devel without specific version for EPEL-7 and F-30
- Make sure all static path buffers use PATH_MAX consistently.
- Support a positional parameter on 'make check' to run part of test
suite.
- Followup to the PIC check for static ELF libraries (#153)
- Create TARGET_ARG to get optional target arguments.
- Change *-dtds packages from Requires to Suggests for el8 and fedora.
- 'sort | uniq' -> 'sort -u'
- Rename 'make release' to 'make new-release'; add 'make release'
- Fix build_module() in test_kmod.py
* Wed Jun 24 2020 David Cantrell <dcantrell@redhat.com> - 0.13-2
- Rebuild against latest mandoc package (#1850375)
* Mon May 18 2020 David Cantrell <dcantrell@redhat.com> - 0.13-1
- Remove the GitHub Release page stuff from utils/release.sh
- Drop meson_version from meson.build
- Change meson.build to require xmlrpc-c >= 1.32.5
- Fix some errors when running with libiniparser 3.1
- Only set CURLOPT_TCP_FASTOPEN if we have it available.
- Expand the template rpminspect.conf file for the test suite.
- Handle 'localhost.localdomain' FQDN in the test suite base clases
- Rework the test_manpage.py tests to work with rpm >= 4.11.x
- BR xmlrpc-c >= 1.32.5 and iniparser >= 3.1
- README updates
- Modify the Makefile so it works with 'ninja' or 'ninja-build'
- Rename the tests/ subdirectory to test/
- Split meson.build out in to different meson.build files.
- Move builds.c to lib/, remove builds.h from src/
- Move rpminspect.conf to data/, expand data/meson.build
- Fix the --version output to remove '@' wrapping the version number.
- Remove diff.3, the code is gone from lib/
- Begin doc/Doxyfile for API documentation.
- Add Doxygen documentation for badwords.c, builds.c, and checksums.c
- Make sure the changelog inspection runs with before/after pairs (#130)
- Ignore debuginfo and debugsource packages in the kmod inspection.
- Skip the kmod inspection if there is no peer_file (#131)
- Handle kernel modules that move paths between builds (#131)
- Test cases for kernel modules changing paths between builds (#131)
- Add Doxygen documentation to four C files, update others.
- First part of reworking the add_result() API.
- Add init_result_params() to reset the struct result_params structures.
- Additional Doxygen documentation blocks for librpminspect.
- More librpminspect documentation work.
- Un-static some of the inspect_elf.c functions.
- Remove MPARSE_MAN to let libmandoc autodetect the type (#132)
- Revise list_to_string() to support optional delimiter.
- Add get_elf_section_names() to librpminspect
- Support [lto] section with lto_symbol_name_prefixes in rpminspect.conf
- Add 'LTO' inspection to librpminspect (#129)
- Add 'LTO' inspection test cases (#129)
- Fix free(): double free detected in tcache 2 (#134)
- Do not strdup() header and remedy in add_result_entry()
- Store package extract root in rpmpeer_entry_t for each package.
- Add strtype() to librpminspect to return string indicating file type.
- Add the 'symlinks' inspection to librpminspect (#133)
- Add tests for the 'symlinks' inspection to the test suite
- Update README file
- chmod 0755 test_symlinks.py
- symlink inspection adjustments based on feedback (#135 & #136)
- Simplify the license inspection routine (#138)
- Add get_elf_machine() to readelf.c (#139)
- Elf64_Half -> GElf_Half in dt_needed_driver()
- Skip eBPF ELF objects in the 'elf' inspection (#139)
- Stop appending a newline to string in strappend()
- Collect all results from getLatestBuild Koji XML-RPC call (#137)
- Return EM_NONE in get_elf_machine()
- In download_build(), fix how srcfmt is set.
- Fix some memory errors associated with the results and parameters.
- Add a new faux-result to the results output for 'rpminspect'
- Use params.msg for reporting in check_bin_rpm_changelog()
- Add teardown steps in baseclass to clean up rpm build files
- Adding tests to validate file ownership and capabilities tests
- Added build cleanup in baseclass and fixed setUp typo - still testing
- Many more tests fixed - down to six failures.
- Fixes to mockbuild tests
- Fixed some duplicate class names and now passing all tests
- Added docstrings to all tests and other small bugfixes
- Added docstrings to all tests and other small bugfixes
- Formatting and style fixes
- Make sure only RPM files are passed to get_rpm_info()
- Update TODO list
- Return get_rpm_info() and add_peer() have void returns.
- When public headers change in 'changedfiles', do not free
param.details
- Check is eptr->data is NULL in find_one_peer (#142)
- Define EM_BPF if we lack it.
- Skip 'upstream' inspection if no source packages are provided.
- Add explicit librpminspect Requires to the main package.
- Add test cases for the 'upstream' inspection.
- Simplify how the versions are collected in inspect_upstream()
- Update translation template.
* Tue Apr 21 2020 Björn Esser <besser82@fedoraproject.org> - 0.12-2
- Rebuild (json-c)
* Tue Apr 21 2020 David Cantrell <dcantrell@redhat.com> - 0.12-1
- Do not use headerLink() in extract_rpm()
- Expand the 'kmod' inspection to check module dependencies.
- Expand 'kmod' inspection to cover PCI device IDs
- Update the TODO list
- Update Dockerfile.test for Fedora 31
- Updates for the MISSING file
- Add DEBUG_PRINT() macro to librpminspect.
- Add 'favor_release' setting in rpminspect.conf under [vendor] (#98)
- Add more lines to [inspections] in src/rpminspect.conf
- Change up the DEBUG_PRINT() macro
- Don't assume favor_release is set in rpminspect.conf
- Format stdout and stderr correctly from baseclass, run with -d
- Correctly recognize parenthesized license substrings (#101)
- Shorten the names of test classes.
- Generate a dummy 'changelog' for the CI tests
- Adjust how the dummy changelog is made for Travis-CI
- One more slight change to how .travis.yml runs mkrpmchangelog.sh
- Nope, just can't spell the name of my own script.
- Copy the dummy changelog to /root/rpmbuild/SOURCES
- Add /bin to PATH in mkrpmchangelog.sh
- Make sure glibc[-devel].i686 is installed for the test suite.
- Add test kernel module for use in the integration test suite.
- Update the TODO list
- Note the test suite needs kernel-devel installed.
- Expand the derp kernel module for depends and alias support.
- Fix up some of the kmod functions in librpminspect
- In the test suite, use the same before & after package version.
- Add test_kmod.py to the test suite.
- Stub out test_ownership.py and test_shellsyntax.py
- * extract_rpm -> *extract_rpm
- Handle parenthesized license substrings with all tokens (#102)
- Combine prototype sections in rpminspect.h for kmods.c
- Implement the 'arch' inspection.
- Add a section to the README file explaining how to run the tests.
- Add the 'subpackages' inspection.
- Ignore 'build' directory.
- Fix the kernel module alias tests in test_kmod.py
- Follow the pep8 style
- Remove unused import in tests
- Start some spec file changes to support building on OpenSUSE
- Update TODO and MISSING
- Move the assert() for ri in inspect_modularity() up.
- Use 'pip3' in .travis.yml and Dockerfil.test
- More updates to Travis-CI control files.
- And another change for the .travis.yml file
- Revert "Start some spec file changes to support building on OpenSUSE"
- Handle return code 1000 from the Koji hub.
- Expand meson.build and rpminspect.spec.in for EPEL-8
- Support libiniparser v3.x and v4.x APIs
- Added the 'changelog' inspection.
- Add possibility to run integration test suites separately
- Begin i18n support for string translations.
- Mark strings in lib/ for translation, update rpminspect.pot
- How to run and debug integration tests
- Fixes for i18n string marking changes.
- More build fixes for the change to translatable strings.
- Favor libmandoc.a when build rpminspect
- Display the line number in DEBUG_PRINT()
- Expand the config file with [pathmigration] and [ignore]
- Fix double free in list_free() (#107)
- Really fix the double free() in arch/subpackages (#107)
- Do not require a tty when running (#109).
- Add the 'pathmigration' inspection and test cases.
- Rework the 'xml' inspection to better handle DTDs and SVG files (#110)
- Default rpminspect.conf updates
- Expand 'filesize' to report changes at different levels by percentage
- Update TODO list.
- Fix bug in shellsyntax where before and after builds are invalid.
- Add shellsyntax tests for /bin/sh
- Add libdiff code snapshot to librpminspect
- Patch diff.c so it builds in librpminspect
- Include diff.h in rpminspect.h
- Refactor variable names
- Add some helper functions for reading and working with text files.
- Implement the unified_diff() library function.
- Add two utility functions to librpminspect.
- Change upstream_driver() to use unified_diff()
- Use unified_diff() in changedfiles rather than running DIFF_CMD
- Fix for 'error: format not a string literal and no format arguments'
- Split unified_diff() in to unified_file_diff() and unified_str_diff()
- Change 'make POTFILES' to 'make update-pot', update po/rpminspect.pot
- Add /bin/bash tests
- Add DEBUG_PRINT() to annocheck_driver()
- Rename 'Screendump' to 'Details' in the output listings.
- s/depends/dependencies/ in meson.build
- Fix SIGSEGV in inspect_changelog() (#115)
- Add tests for shellsyntax for /bin/ksh
- Handle RPMs with empty or missing changelogs (#116)
- Update the AUTHORS file.
- Add tests for shellsyntax for /bin/zsh
- Add tests for shellsyntax for /bin/tcsh
- Add tests for shellsyntax for /bin/csh
- Refactor the unified_diff.c code to be more reliable (#116)
- Correct RPM %changelog output to match rpm (#116)
- Stop adding DIFF_COMMON lines twice when the hunk continues (#116)
- Adjust the unified_output() function for more output control (#116).
- Remove libdiff code and return to using diff(1) via fork and exec.
- Fix some memory leaks in inspect_changelog.c
- Update the test_changelog.py to do list.
- Added the tests for losing the %changelog in the after builds
- Update the 'make instreqs' target, README, and rpminspect.spec.in
- Unify the readme with yum as rpminspect works on yum as well as dnf
- Require xmlrpc >= 1.51.0
- Add get_nevr() and get_rpmtag_str() to lib/rpm.c
- Do not abort if the hdr is NULL in get_changelog() (#127)
- Update test_changelog.py with more changelog inspection tests.
- Remaining set of changelog inspection fixes.
- Make sure remaining test_changelog.py test cases pass.
- Handle shell syntax tests that don't return non-zero on failure.
- Add tests for shellsyntax for /bin/rc
- Add release.c to librpminspect source.
- If no new %changelog entry is found, report OK if NVRs match. (#127)
- Modify license inspection reporting.
- Split add_result() in to add_result() and add_result_entry()
- Prevent reporting unapproved license tokens for approved expressions.
- Disable empty license tag tests, add ValidGlibcLicenseTagKoji
- Temporarily disable UnprofessinalChangeLogEntryCompareKoji
- Update po/ files.
- Adjust how GitHub release assets are uploaded.
* Fri Feb 14 2020 David Cantrell <dcantrell@redhat.com> - 0.11-1
- Change the way get_mime_type() works so it caches the type.
- Support an optional [annocheck] section in the config file (#62)
- Add a 'make help' target in the helper Makefile
- Add 'annocheck' inspection to librpminspect (#62)
- Add weak dependency for /usr/bin/annocheck (#62)
- EM_S390 maps to R_390_* macros in /usr/include/elf.h
- Only run the changedfiles inspection under certain conditions (#74)
- Skip source packages in the changedfiles inspection (#74)
- Add back missing free() in rpminspect.c, but in the right place.
- Simplify the returns out of changedfiles_driver()
- Add the 'DT_NEEDED' inspection to librpminspect.
- Expand 'elf' inspection description to mention forbidden function
check.
- Change result severity in 'upstream' based on package versions.
- Cache rpmfile_entry_t checksums.
- Add 'filesize' inspection to librpminspect.
- Updated top level docs.
- Check all license abbreviations in the 'license' inspection (#83)
- Use MESON_BUILD_DIR in the Makefile 'all' target.
- Drop MAGIC_SYMLINK from magic_open() in get_mime_type()
- Move stat-whitelist checker to whitelist.c
- fixup! Move stat-whitelist checker to whitelist.c
- Change the prototype for add_result()
- Add the 'permissions' inspection.
- Replace check_stat_whitelist() with on_stat_whitelist()
- Add 'make instreqs' target to install build and runtime dependencies.
- Handle ENOENT failures from realpath() in unpack_archive() (#84)
- Only run the DT_NEEDED check for ET_DYN files (#85)
- Update the HISTORY file
- Add a [specname] config file setting to rpminspect.conf (#86)
- Boilerplate updates
- Implement runtime profiles (#82)
- Update TODO list
- Compare JVM major version against the minimum JVM version (#89)
- When reporting public header changes, skip first 3 lines from diff(1)
- Address errors reported in DT_NEEDED inspection in BZ#1793113
- Various word fixes in the rpminspect.1 man page
- PRIMARY_BASENAME -> PRIMARY_FILENAME
- Correct the javabytecode major JVM version comparison (#89)
- Reset field to MODE when reading the stat-whitelist (#90)
- Add vendor_data_dir setting to rpminspect.conf
- Rename [tests] section in rpminspect.conf to [settings]
- Expand rpminspect.conf with an [inspections] section
- Improve failure reporting in the integration test suite
- Handle symlinks in copytree() in src/builds.c (#92)
- Make sure "noarch" and "src" are always honored as package arches
(#93)
- Update TODO list.
- Formatting changes on MISSING
- Add get_rpm_header_arch() to librpminspect
- Further improve the handling of 'noarch' and 'src' for -a (#93)
- Use get_rpm_header_arch() to retrieve RPMTAG_ARCH
- Move to using libcap instead of libcap-ng
- Fix Koji scratch build download support in librpminspect (#94)
- Add the 'capabilities' inspection to librpminspect.
- Renamed [vendor-data] to just [vendor] in the config file.
- Implement an RPM header cache in librpminspect
- Restrict get_cap() to S_IFREG files.
- Note the licenses for all of the dependent components.
- get_rpm_header() pointer fixes
- Implement Freedesktop.org icon lookup routine for 'desktop' (#95)
- updating imports to use libcap, matching BuildRequires in specfile
- If vendor is not set in rpminspect.conf, skip tag check.
- Handle upstream source adds/removes with pkg version changes (#96)
- Boilerplate updates
- Improve "Missing license database" error message.
- Update TODO list
- Use xasprintf() instead of strdup() here for parameters
- Begin the 'kmod' inspection for kernel modules.
- Typo fix in src/rpminspect.conf: s/not/no/
- Remove some memory leaks in librpminspect and rpminspect.
- Shorten -l output, use -v to get current output.
- Remove -x from #! in utils/release.sh
* Mon Dec 09 2019 David Cantrell <dcantrell@redhat.com> - 0.10-1
- Disable jq usage in the release script for now
- Generate a complete %changelog block for the spec file
- Force overwrite of generate .tar file in .copr/Makefile
- Run srpm and check targets before koji, pass name of tarball
- Add utils/submit-koji-builds.sh, which drives 'make koji'
- Genericize submit-koji-builds.sh a bit more
- Start a .gitignore file
- Changes to the release and build automation for the RPM changelog
- Handle int32 and int64 size results from Koji over XMLRPC (#61)
- Make --copr mode on utils/mkrpmchangelog.sh generic
- Existing packages that go away in a comparison are VERIFY (#59)
- inspect_elf() RESULT_OK should be NOT_WAIVABLE
- Refactor strprefix()
- Fix a memory leak in init_rpminspect() with the javabytecode array.
- Fix a memory leak in the license inspection.
- Update release and build steps in the README
- test_elf.py tests that verify passing tests are Not Waviable
- Build package download URLs correctly, drop use_volume_name setting
- Clean up rpminspect error messages when downloading.
- For fetch-only mode (-f), default workdir to getcwd()
- The new libmandoc API works, drop explicit 1.14.4 BuildRequires
- Add is_text_file() to librpminspect
- Handle multiline results in run_cmd() correctly (#59)
- Show diff(1) output for changing upstream text sources (#59)
- Adjust run_cmd() calls to match the new API
- Explain how the -w option works with the -f option in the man page
- In REMEDY_LICENSE, explain that valid licenses need to be in licdb
- Fix some memory leaks in the license inspection.
- Add a [products] section to the config file for mapping release
strings (#68)
- Fix json-c memory leak.
- Small memory leak fixes for the product release string gathering.
- Trying to get the automated release notice posting working on github.
- Use printf to build github release body text
- changelog -> ${CWD}/changelog
- Make upstream spec file include the changelog like downstream.
- Syntax errors fixed in utils/release.sh
- Escape newlines in the release body text.
- Run the release script with -x for now, for debugging.
- Shift things around a bit in the release.sh script
- Use jq(1) in utils/release.sh to generate the JSON data for GitHub.
- Slight changes to the jq(1) commands.
- Even more small changes to the jq(1) command.
- Do not build the spec file or SRPM in the release.sh script
- Correctly generate the git log entry for the release.
- Edit the release on github rather than create a new one.
- Still working out problems with automating releases on github.
- Fix 'Builds have different product release (el7 != el7) (#70)
- Remove unnecessary free()
- Shorten the eu-elfcmp reporting (#71)
- Switch to using a BUFSIZ buffer for getline() in run_cmd()
- Expand the get_product_release() functionality (#72)
- Detect product release strings correctly with underscores (#76)
- Support SRPM files that lack RPMTAG_SOURCE entries (#78)
- Handle subpackages with different version numbers (#77)
- Add support for Koji scratch builds in rpminspect (#60)
- Make get_product_release() even if [products] is missing.
- Drop the extra strdup(), xmlrpc_decompose_value() handles it for us.
- Update the rpminspect(1) man page.
- line-buffer stdout - makes "rpminspect ... | tee" behave better
- Clean up memory leaks with the Koji task handling code.
- Add a SIGABRT handler to rpminspect(1)
- bad free()
- Change the task member of koji_task_entry_t to be 'struct koji_task *'
- Skip shellsyntax inspection on source packages (#79)
- Fix set_worksubdir() TASK_WORKDIR test (#80)
* Wed Nov 20 2019 David Cantrell <dcantrell@redhat.com> - 0.9-3
- Drop explicit versioned BR for libmandoc-devel
* Thu Nov 14 2019 David Cantrell <dcantrell@redhat.com> - 0.9-2
- Fix a %changelog mishap
* Thu Nov 14 2019 David Cantrell <dcantrell@redhat.com> - 0.9-1
- Complete the tests/test_manpage.py integration tests
- Add xml inspection integration tests.
- disttag inspection failures should be not waivable
- All RESULT_OK results should be NOT_WAIVABLE
- Expand integration test suite to support waiver auth checking
- Improve forbidden_path_prefixes results reporting (#59)
- Add a HISTORY file explaining a bit about the history of rpminspect
- Use lstat(2) in copyfile() so symlinks are correctly handled
- Fix a problem with peer detection when comparing single RPM files.
- Stop setting whichbuild in so many places in build.c
- Two hidden bugs in inspect_elf.c resolved via the integration suite
- Add test_elf.py to the tests/ subdirectory
- Add elf_ipv6_blacklist to the sample rpminspect.conf file
- chmod 0644 fortify.c
- Reformat a line in get_elf_section() to make it more readable.
- Add forbidden IPv6 function use tests to tests/test_elf.py
- Forgot to add tests/data/forbidden-ipv6.c
- Add test_elf.py test cases for DT_TEXTREL on 32-bit architectures
- Use headerGetString() throughout librpminspect
- Add some missing free() calls in run_cmd()
- Use string_list_t ** for user_data in elf_archive_iterate()
- Add losing -fPIC on 32-bit builds test in test_elf.py
- Add get_nevra() to librpminspect to get RPMTAG_NEVRA
- Do not output Waiver Authorization for RESULT_INFO results
- Call rpmFreeRpmrc() from main() before the program exits
- Adjust how and where rpmtdFree() is called
- Use the GNU version of basename(3) and ensure we don't use the libgen
version.
- Fix forbidden_path_prefixes check in the addedfiles inspection (#59)
- Add missing free() to inspect_desktop.c
- Simplify the is_valid_license() code that concatenates tokens
- Simple Makefile to drive different parts of the build.
- Add the git log to the release notification published to github
- Fix error in the 'make release' target
- If asset ID cannot be found, dump what github returned on stdout
- Use jq(1) to escape strings for JSON
|
