| Changelog |
* Wed Aug 07 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-97
- Include regexp module in EFI builds
* Thu Aug 01 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-96
- Manual build for the Fedora 31 mass rebuild to succeed
* Thu Jul 25 2019 Fedora Release Engineering <releng@fedoraproject.org>
- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
* Thu Jul 18 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-94
- 20-grub-install: Restore default SELinux security contexts for BLS files
Resolves: rhbz#1726020
* Wed Jul 17 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-93
- Add btrfs snapshot submenu when BLS configuration is used
- Move grub2-probe to the grub2-tools-minimal subpackage
Resolves: rhbz#1715994
* Tue Jul 16 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-92
- Cleanup our patchset to reduce the number of patches
* Sat Jul 13 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-91
- Includes security modules in Grub2 EFI builds (benjamin.doron)
Resolves: rhbz#1722938
- Enable again multiboot and multiboot2 modules on EFI builds
Resolves: rhbz#1703872
* Fri Jul 05 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-90
- Fix failure to request grub.cfg over HTTP
- Some ARM fixes (pbrobinson)
- Preserve multi-device workflows (Yclept Nemo)
* Thu Jun 27 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-89
- Fix --bls-directory option comment in grub2-switch-to-blscfg man page
Resolves: rhbz#1714835
- 10_linux_bls: use '=' to separate --id argument due a Petitboot bug
- grub-set-bootflag: Print an error if failing to read from grubenv
Resolves: rhbz#1702354
- 10_linux: generate BLS section even if no kernels are found in /boot
- 10_linux: don't search for OSTree kernels
* Tue Jun 18 2019 Sergio Durigan Junior <sergiodj@redhat.com> - 2.02-88
- Use '-g' instead of '-g3' when compiling grub2.
Resolves: rhbz#1708780
* Tue Jun 11 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-87
- Rebuild for RPM 4.15
* Mon Jun 10 2019 Igor Gnatenko <ignatenkobrain@fedoraproject.org>
- Rebuild for RPM 4.15
* Mon Jun 10 2019 Igor Gnatenko <ignatenkobrain@fedoraproject.org>
- Rebuild for RPM 4.15
* Mon May 20 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-84
- Don't try to switch to a BLS config if GRUB_ENABLE_BLSCFG is already set
* Wed May 15 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-83
- Fix error messages wrongly being printed when executing blscfg command
Resolves: rhbz#1699761
- Remove bogus load_env after blscfg command in 10_linux
* Tue May 07 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-82
- Make blscfg module compatible at least up to the Fedora 19 GRUB core
Related: rhbz#1652806
* Fri May 03 2019 Neal Gompa <ngompa13@gmail.com> - 2.02-81
- Add grub2-mount to grub2-tools-minimal subpackage
Resolves: rhbz#1471267
* Fri May 03 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-80
- Add grub2-emu subpackage
* Fri May 03 2019 Tim Landscheidt <tim@tim-landscheidt.de> - 2.02-79
- Fix description of grub2-pc
Resolves: rhbz#1484298
* Thu Apr 18 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-78
- Add 10_reset_boot_success to Makefile
Related: rhbz#17010
* Thu Apr 18 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-77
- Never remove boot loader configuration for other boot loaders from the ESP.
This would render machines with sd-boot unbootable (zbyszek)
- Execute grub2-switch-to-blscfg script in %posttrans instead of %post
- grub.d: Split out boot success reset from menu auto hide script (lorbus)
- HTTP boot: strncmp returns 0 on equal (stephen)
- Some grub2-emu fixes and make it to not print unnecessary messages
- Don't assume that boot commands will only return on fail
* Thu Mar 28 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-76
- 10_linux_bls: don't add --users option to generated menu entries
Resolves: rhbz#1693515
* Tue Mar 26 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-75
- A set of EFI fixes to support arm64 QCom UEFI firmwares (pbrobinson)
* Fri Mar 22 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-74
- Fix some BLS snippets not being displayed in the GRUB menu
Resolves: rhbz#1691232
- Fix possible undefined behaviour due wrong grub_efi_status_t type (pjones)
* Wed Mar 20 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-73
- Only set blsdir if /boot/loader/entries is in a btrfs or zfs partition
Related: rhbz#1688453
* Mon Mar 11 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-72
- Avoid grub2-efi package to overwrite existing /boot/grub2/grubenv file
Resolves: rhbz#1687323
- Switch to BLS in tools package %post scriptlet
Resolves: rhbz#1652806
* Wed Feb 27 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-71
- 20-grub-install: Replace, rather than overwrite, the existing kernel (pjones)
Resolves: rhbz#1642402
- 99-grub-mkconfig: Don't update grubenv generating entries on ppc64le
Related: rhbz#1637875
- blscfg: fallback to default_kernelopts if BLS option field isn't set
Related: rhbz#1625124
- grub-switch-to-blscfg: copy increment.mod for legacy BIOS and ppc64
Resolves: rhbz#1652806
* Fri Feb 15 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-70
- Check if blsdir exists before attempting to get it's real path
Resolves: rhbz#1677415
* Wed Feb 13 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-69
- Don't make grub_strtoull() print an error if no conversion is performed
Resolves: rhbz#1674512
- Set blsdir if the BLS directory path isn't one of the looked up by default
Resolves: rhbz#1657240
* Mon Feb 04 2019 Javier Martinez Canillas <javierm@redhat.com> - 2.02-68
- Don't build the grub2-efi-ia32-* packages on i686 (pjones)
- Add efi-export-env and efi-load-env commands (pjones)
- Make it possible to subtract conditions from debug= (pjones)
- Try to set -fPIE and friends on libgnu.a (pjones)
- Add more options to blscfg command to make it more flexible
- Add support for prepend early initrds to the BLS entries
- Fix grub.cfg-XXX look up when booting over TFTP
* Fri Feb 01 2019 Fedora Release Engineering <releng@fedoraproject.org>
- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
* Mon Dec 17 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-66
- Don't exclude /etc/grub.d/01_fallback_counting anymore
* Tue Dec 11 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-65
- BLS files should only be copied by grub-switch-to-blscfg if BLS isn't set
Related: rhbz#1638117
- Fix get_entry_number() wrongly dereferencing the tail pointer
Resolves: rhbz#1654936
- Make grub2-mkconfig to honour GRUB_CMDLINE_LINUX in /etc/default/grub
Resolves: rhbz#1637875
* Fri Nov 30 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-64
- Add comments and revert logic changes in 01_fallback_counting
- Remove quotes when reading ID value from /etc/os-release
Related: rhbz#1650706
- blscfg: expand grub_users before passing to grub_normal_add_menu_entry()
Resolves: rhbz#1650706
- Drop buggy downstream patch "efinet: retransmit if our device is busy"
Resolves: rhbz#1649048
- Make the menu entry users option argument to be optional
Related: rhbz#1652434
- 10_linux_bls: add missing menu entries options
Resolves: rhbz#1652434
- Drop "Be more aggro about actually using the *configured* network device."
Resolves: rhbz#1654388
- Fix menu entry selection based on title
Resolves: rhbz#1654936
* Wed Nov 21 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-63
- add 10_linux_bls grub.d snippet to generate menu entries from BLS files
Resolves: rhbz#1636013
- Only set kernelopts in grubenv if it wasn't set before
Resolves: rhbz#1636466
- kernel-install: Remove existing initramfs if it's older than the kernel (pjones)
Resolves: rhbz#1638405
- Update the saved entry correctly after a kernel install (pjones)
Resolves: rhbz#1638117
- blscfg: sort everything with rpm *package* comparison (pjones)
Related: rhbz#1638103
- blscfg: Make 10_linux_bls sort the same way as well
Related: rhbz#1638103
- don't set saved_entry on grub2-mkconfig
Resolves: rhbz#1636466
- Fix menu entry selection based on ID and title (pjones)
Resolves: rhbz#1640979
- Don't unconditionally set default entry when installing debug kernels
Resolves: rhbz#1636346
- Remove installkernel-bls script
Related: rhbz#1647721
* Thu Oct 04 2018 Peter Jones <pjones@redhat.com> - 2.02-62
- Exclude /etc/grub.d/01_fallback_counting until we work through some design
questions.
Resolves: rhbz#1614637
* Wed Oct 03 2018 Peter Jones <pjones@redhat.com> - 2.02-61
- Fix the fallback counting script even harder. Apparently, this wasn't
tested well enough.
Resolves: rhbz#1614637
* Tue Oct 02 2018 Peter Jones <pjones@redhat.com> - 2.02-60
- Fix grub.cfg boot counting snippet generation (lorbus)
Resolves: rhbz#1614637
- Fix spurrious allocation error reporting on EFI boot
Resolves: rhbz#1635319
- Stop doing TPM on BIOS *again*. It just doesn't work.
Related: rhbz#1579835
- Make blscfg module loadable on older grub2 i386-pc and powerpc-ieee1275
builds
- Fix execstack cropping up in grub2-tools
- Ban stack trampolines with compiler flags.
* Tue Sep 25 2018 Hans de Goede <hdegoede@redhat.com> - 2.02-59
- Stop using pkexec for grub2-set-bootflag, it does not work under gdm
instead make it suid root (it was written with this in mind)
* Tue Sep 25 2018 Peter Jones <pjones@redhat.com>
- Use bounce buffers for addresses above 4GB
- Allow initramfs, cmdline, and params >4GB, but not kernel
* Wed Sep 12 2018 Peter Jones <pjones@redhat.com> - 2.02-58
- Add 2 conditions to boot-success timer and service:
- Don't run it for system users
Resolves: rhbz#1592201
- Don't run it when pkexec isn't available
Resolves: rhbz#1619445
- Use -Wsign-compare -Wconversion -Wextra in the build.
* Tue Sep 11 2018 Peter Jones <pjones@redhat.com> - 2.02-57
- Limit grub_malloc() on x86_64 to < 31bit addresses, as some devices seem to
have a colossally broken storage controller (or UEFI driver) that can't do
DMA to higher memory addresses, but fails silently.
Resolves: rhbz#1626844 (possibly really resolving it this time.)
- Also integrate Hans's attempt to fix the related error from -54, but do it
the other way around: try the low addresses first and *then* the high one if
the allocation fails. This way we'll get low regions by default, and if
kernel/initramfs don't fit anywhere, it'll try the higher addresses.
Related: rhbz#1624532
- Coalesce all the intermediate debugging junk from -54/-55/-56.
* Tue Sep 11 2018 Peter Jones <pjones@redhat.com> - 2.02-56
- Don't mangle fw_path even harder.
Resolves: rhbz#1626844
- Fix reboot being missing on some platforms, and make it alias to
"reset" as well.
- More dprintf().
* Mon Sep 10 2018 Peter Jones <pjones@redhat.com> - 2.02-55
- Fix UEFI memory problem in a different way.
Related: rhbz#1624532
- Don't mangle fw_path with a / unless we're on http
Resolves: rhbz#1626844
* Fri Sep 07 2018 Kevin Fenzi <kevin@scrye.com> - 2.02-54
- Add patch from https://github.com/rhboot/grub2/pull/30 to fix uefi booting
Resolves: rhbz#1624532
* Thu Aug 30 2018 Peter Jones <pjones@redhat.com> - 2.02-53
- Fix AArch64 machines with no RAM latched lower than 1GB
Resolves: rhbz#1615969
- Set http_path and http_url when HTTP booting
- Hopefully slightly better error reporting in some cases
- Better allocation of kernel+initramfs on x86_64 and aarch64
Resolves: rhbz#1572126
* Mon Aug 20 2018 Peter Jones <pjones@redhat.com> - 2.02-52
- Update conflicts on grubby not to care about %{?dist}
* Sun Aug 19 2018 Peter Jones <pjones@redhat.com> - 2.02-51
- Make it quieter.
* Thu Aug 16 2018 Peter Jones <pjones@redhat.com> - 2.02-50
- Fix arm32 off-by-one error on reading the PE header.
* Tue Aug 14 2018 Peter Jones <pjones@redhat.com> - 2.02-50
- Fix typo in /etc/grub.d/01_fallback_counting
Resolves: rhbz#1614637
* Fri Aug 10 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-50
- Add an installkernel script for BLS configurations
* Tue Aug 07 2018 Peter Jones <pjones@redhat.com> - 2.02-49
- Temporarily make -cdboot perms 0700 again.
* Fri Aug 03 2018 Peter Jones <pjones@redhat.com> - 2.02-48
- Kill .note.gnu.property with fire.
Resolves: rhbz#1612339
* Thu Aug 02 2018 Peter Jones <pjones@redhat.com> - 2.02-47
- Enable armv7 EFI builds. This was way harder than I expected.
* Tue Jul 17 2018 Peter Jones <pjones@redhat.com> - 2.02-46
- Fix some minor BLS issues
- Rework the FDT module linking to make aarch64 build and boot right
* Mon Jul 16 2018 pjones <pjones@redhat.com> - 2.02-45
- Rework SB patches and 10_linux.in changes even harder.
Resolves: rhbz#1601578
* Mon Jul 16 2018 Hans de Goede <hdegoede@redhat.com> - 2.02-44
- Make the user session automatically set the boot_success grubenv flag
- Make offline-updates increment the boot_indeterminate grubenv variable
* Mon Jul 16 2018 pjones <pjones@redhat.com> - 2.02-43
- Rework SB patches and 10_linux.in changes
* Fri Jul 13 2018 Peter Jones <pjones@redhat.com> - 2.02-42
- Revert broken moduledir fix *again*.
* Thu Jul 12 2018 Peter Jones <pjones@redhat.com> - 2.02-41
- Fix our linuxefi/linux command reunion.
* Wed Jul 11 2018 Peter Jones <pjones@redhat.com> - 2.02-40
- Port several fixes from the F28 tree and a WIP tree.
* Mon Jul 09 2018 pjones <pjones@redhat.com> - 2.02-39
- Fix my fix of grub2-switch-to-blscfg (javierm and pjones)
* Mon Jul 02 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-38
- Use BLS fragment filename as menu entry id and for sort criterion
* Tue Jun 26 2018 Javier Martinez Canillas <javierm@redhat.com>
- Cleanups and fixes for grub2-switch-to-blscfg (pjones)
- Use /boot/loader/entries as BLS dir also on EFI (javierm)
* Tue Jun 19 2018 Peter Jones <pjones@redhat.com> - 2.02-37
- Fix some TPM errors on 32-bit (hdegoede)
- More fixups to avoid compiler changes (pjones)
- Put lsmmap into the EFI builds (pjones)
Related: rhbz#1572126
- Make 20-grub.install to exit if there is no machine ID set (javierm)
Resolves: rhbz#1576573
- More fixes for BLS (javierm)
Resolves: rhbz#1588184
* Wed May 16 2018 Peter Jones <pjones@redhat.com> - 2.02-37.fc29
- Fixups to work with gcc 8
- Experimental https boot support on UEFI
- XFS fixes for sparse inode support
Resolves: rhbz#1575797
* Thu May 10 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-36
- Use version field to sort BLS entries if id field isn't defined
- Add version field to BLS fragments generated by 20-grub.install
* Tue Apr 24 2018 Peter Jones <pjones@redhat.com> - 2.02-35
- A couple of fixes needed by Fedora Atomic - javierm
* Mon Apr 23 2018 Peter Jones <pjones@redhat.com> - 2.02-34
- Put the os-prober dep back in - we need to change test plans and criteria
before it can go.
Resolves: rhbz#1569411
* Wed Apr 11 2018 Peter Jones <pjones@redhat.com> - 2.02-33
- Work around some issues with older automake found in CentOS.
- Make multiple initramfs images work in BLS.
* Wed Apr 11 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-32
- Make 20-grub.install to generate debug BLS when MAKEDEBUG is set.
* Fri Apr 06 2018 Peter Jones <pjones@redhat.com> - 2.02-31
- Pull in some TPM fixes I missed.
* Fri Apr 06 2018 Peter Jones <pjones@redhat.com> - 2.02-30
- Enable TPM measurements
- Set the default boot entry to the first entry when we're using BLS.
* Tue Apr 03 2018 Peter Jones <pjones@redhat.com> - 2.02-29
- Fix for BLS paths on BIOS / non-UEFI (javierm)
* Fri Mar 16 2018 Peter Jones <pjones@redhat.com> - 2.02-28
- Install kernel-install scripts. (javierm)
- Add grub2-switch-to-blscfg
* Tue Mar 06 2018 Peter Jones <pjones@redhat.com> - 2.02-27
- Build the blscfg module in on EFI builds.
* Wed Feb 28 2018 Peter Jones <pjones@redhat.com> - 2.02-26
- Try to fix things for new compiler madness.
I really don't know why gcc decided __attribute__((packed)) on a "typedef
struct" should imply __attribute__((align (1))) and that it should have a
warning that it does so. The obvious behavior would be to keep the alignment
of the first element unless it's used in another object or type that /also/
hask the packed attribute. Why should it change the default alignment at
all?
- Merge in the BLS patches Javier and I wrote.
- Attempt to fix pmtimer initialization failures to not be super duper slow.
* Fri Feb 09 2018 Igor Gnatenko <ignatenkobrain@fedoraproject.org>
- Escape macros in %changelog
* Tue Jan 23 2018 Peter Jones <pjones@redhat.com> - 2.02-24
- Fix a merge error from 2.02-21 that affected kernel loading on Aarch64.
Related: rhbz#1519311
Related: rhbz#1506704
Related: rhbz#1502312
* Fri Jan 19 2018 Peter Jones <pjones@redhat.com> - 2.02-23
- Only nerf annobin, not -fstack-crash-protection.
- Fix a conflict on /boot/efi directory permissions between -cdboot and the
normal bootloader.
* Thu Jan 18 2018 Peter Jones <pjones@redhat.com> - 2.02-22
- Nerf some gcc 7.2.1-6 'features' that cause grub to crash on start.
* Thu Jan 18 2018 Peter Jones <pjones@redhat.com> - 2.02-21
- Fix grub2-efi-modules provides/obsoletes generation
Resolves: rhbz#1506704
- *Also* build grub-efi-ia32{,-*,!-modules} packages for i686 builds
Resolves: rhbz#1502312
- Make everything under /boot/efi be mode 0700, since that's what FAT will
show anyway.
* Wed Jan 17 2018 Peter Jones <pjones@redhat.com> - 2.02-20
- Update to newer upstream for F28
- Pull in patches for Apollo Lake hardware
Resolves: rhbz#1519311
* Tue Oct 24 2017 Peter Jones <pjones@redhat.com> - 2.02-19
- Handle xen module loading (somewhat) better
Resolves: rhbz#1486002
|
