uhd/uhd-3.4.2-sdcc-3-fix.patch

1722 lines
76 KiB
Diff
Raw Normal View History

diff --git a/firmware/fx2/b100/board_specific.c b/firmware/fx2/b100/board_specific.c
index 993d925..c85268c 100644
--- a/firmware/fx2/b100/board_specific.c
+++ b/firmware/fx2/b100/board_specific.c
@@ -58,7 +58,7 @@ set_sleep_bits (unsigned char bits, unsigned char mask)
// NOP on usrp1
}
-static xdata unsigned char xbuf[1];
+static __xdata unsigned char xbuf[1];
void
init_board (void)
diff --git a/firmware/fx2/b100/eeprom_io.c b/firmware/fx2/b100/eeprom_io.c
index 9eeb536..666f3f6 100644
--- a/firmware/fx2/b100/eeprom_io.c
+++ b/firmware/fx2/b100/eeprom_io.c
@@ -27,12 +27,12 @@
// returns non-zero if successful, else 0
unsigned char
eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
- xdata unsigned char *buf, unsigned char len)
+ __xdata unsigned char *buf, unsigned char len)
{
// We setup a random read by first doing a "zero byte write".
// Writes carry an address. Reads use an implicit address.
- static xdata unsigned char cmd[1];
+ static __xdata unsigned char cmd[1];
cmd[0] = eeprom_offset;
if (!i2c_write(i2c_addr, cmd, 1))
return 0;
@@ -46,9 +46,9 @@ eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
// returns non-zero if successful, else 0
unsigned char
eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
- const xdata unsigned char *buf, unsigned char len)
+ const __xdata unsigned char *buf, unsigned char len)
{
- static xdata unsigned char cmd[2];
+ static __xdata unsigned char cmd[2];
unsigned char ok;
while (len-- > 0){
diff --git a/firmware/fx2/b100/eeprom_io.h b/firmware/fx2/b100/eeprom_io.h
index 558017b..d1c4ee6 100644
--- a/firmware/fx2/b100/eeprom_io.h
+++ b/firmware/fx2/b100/eeprom_io.h
@@ -27,12 +27,12 @@
// returns non-zero if successful, else 0
unsigned char
eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
- xdata unsigned char *buf, unsigned char len);
+ __xdata unsigned char *buf, unsigned char len);
// returns non-zero if successful, else 0
unsigned char
eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
- const xdata unsigned char *buf, unsigned char len);
+ const __xdata unsigned char *buf, unsigned char len);
#endif /* INCLUDED_EEPROM_IO_H */
diff --git a/firmware/fx2/b100/fpga_load.c b/firmware/fx2/b100/fpga_load.c
index 394c9f5..6604de2 100644
--- a/firmware/fx2/b100/fpga_load.c
+++ b/firmware/fx2/b100/fpga_load.c
@@ -82,9 +82,9 @@ clock_out_config_byte (unsigned char bits)
#else
static void
-clock_out_config_byte (unsigned char bits) _naked
+clock_out_config_byte (unsigned char bits) __naked
{
- _asm
+ __asm
mov a, dpl
rlc a
@@ -129,14 +129,14 @@ clock_out_config_byte (unsigned char bits) _naked
ret
- _endasm;
+ __endasm;
}
#endif
static void
clock_out_bytes (unsigned char bytecount,
- unsigned char xdata *p)
+ unsigned char __xdata *p)
{
while (bytecount-- > 0)
clock_out_config_byte (*p++);
@@ -156,7 +156,7 @@ clock_out_bytes (unsigned char bytecount,
* ALTERA_NSTATUS = 1 (input)
*/
unsigned char
-fpga_load_xfer (xdata unsigned char *p, unsigned char bytecount)
+fpga_load_xfer (__xdata unsigned char *p, unsigned char bytecount)
{
clock_out_bytes (bytecount, p);
return 1;
diff --git a/firmware/fx2/b100/fpga_rev2.c b/firmware/fx2/b100/fpga_rev2.c
index 326a017..6ceccab 100644
--- a/firmware/fx2/b100/fpga_rev2.c
+++ b/firmware/fx2/b100/fpga_rev2.c
@@ -29,13 +29,13 @@ unsigned char g_tx_reset = 0;
unsigned char g_rx_reset = 0;
void
-fpga_write_reg (unsigned char regno, const xdata unsigned char *regval)
+fpga_write_reg (unsigned char regno, const __xdata unsigned char *regval)
{
//nop
}
-static xdata unsigned char regval[4] = {0, 0, 0, 0};
+static __xdata unsigned char regval[4] = {0, 0, 0, 0};
// Resets both AD9862's and the FPGA serial bus interface.
diff --git a/firmware/fx2/b100/gpif.c b/firmware/fx2/b100/gpif.c
index b499e4f..0cba319 100644
--- a/firmware/fx2/b100/gpif.c
+++ b/firmware/fx2/b100/gpif.c
@@ -156,7 +156,7 @@
// END DO NOT EDIT
// DO NOT EDIT ...
-const char xdata WaveData[128] =
+const char __xdata WaveData[128] =
{
// Wave 0
/* LenBr */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x07,
@@ -182,7 +182,7 @@ const char xdata WaveData[128] =
// END DO NOT EDIT
// DO NOT EDIT ...
-const char xdata FlowStates[36] =
+const char __xdata FlowStates[36] =
{
/* Wave 0 FlowStates */ 0x81,0x2D,0x0E,0x00,0x00,0x04,0x03,0x02,0x00,
/* Wave 1 FlowStates */ 0x81,0x2D,0x09,0x00,0x00,0x04,0x03,0x02,0x00,
@@ -192,7 +192,7 @@ const char xdata FlowStates[36] =
// END DO NOT EDIT
// DO NOT EDIT ...
-const char xdata InitData[7] =
+const char __xdata InitData[7] =
{
/* Regs */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00
};
diff --git a/firmware/fx2/b100/usrp_main.c b/firmware/fx2/b100/usrp_main.c
index 74427b7..a45287e 100644
--- a/firmware/fx2/b100/usrp_main.c
+++ b/firmware/fx2/b100/usrp_main.c
@@ -54,14 +54,14 @@ unsigned char g_tx_enable = 0;
unsigned char g_rx_enable = 0;
unsigned char g_rx_overrun = 0;
unsigned char g_tx_underrun = 0;
-bit enable_gpif = 0;
+__bit enable_gpif = 0;
/*
* the host side fpga loader code pushes an MD5 hash of the bitstream
* into hash1.
*/
#define USRP_HASH_SIZE 16
-xdata at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE];
+__xdata __at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE];
//void clear_fpga_data_fifo(void);
@@ -220,7 +220,7 @@ main_loop (void)
* Toggle led 0
*/
void
-isr_tick (void) interrupt
+isr_tick (void) __interrupt
{
static unsigned char count = 1;
@@ -239,8 +239,8 @@ isr_tick (void) interrupt
void
patch_usb_descriptors(void)
{
- static xdata unsigned char hw_rev;
- static xdata unsigned char serial_no[SERIAL_NO_LEN];
+ static __xdata unsigned char hw_rev;
+ static __xdata unsigned char serial_no[SERIAL_NO_LEN];
unsigned char i;
eeprom_read(I2C_ADDR_BOOT, HW_REV_OFFSET, &hw_rev, 1); // LSB of device id
diff --git a/firmware/fx2/b100/usrp_regs.h b/firmware/fx2/b100/usrp_regs.h
index 3d65337..5646015 100644
--- a/firmware/fx2/b100/usrp_regs.h
+++ b/firmware/fx2/b100/usrp_regs.h
@@ -59,11 +59,11 @@
#define PORT_A_ADDR 0x80
#define PORT_C_ADDR 0xA0
-sbit at PORT_A_ADDR+0 bitALTERA_DCLK; // 0x80 is the bit address of PORT A
-sbit at PORT_A_ADDR+1 bitALTERA_NCONFIG;
-sbit at PORT_A_ADDR+3 bitALTERA_DATA0;
+__sbit __at PORT_A_ADDR+0 bitALTERA_DCLK; // 0x80 is the bit address of PORT A
+__sbit __at PORT_A_ADDR+1 bitALTERA_NCONFIG;
+__sbit __at PORT_A_ADDR+3 bitALTERA_DATA0;
-sbit at PORT_C_ADDR+7 bitALTERA_CONF_DONE;
+__sbit __at PORT_C_ADDR+7 bitALTERA_CONF_DONE;
/* Port B: GPIF FD[7:0] */
diff --git a/firmware/fx2/common/delay.c b/firmware/fx2/common/delay.c
index 13cf0ee..f2e8307 100644
--- a/firmware/fx2/common/delay.c
+++ b/firmware/fx2/common/delay.c
@@ -24,11 +24,11 @@
* Delay approximately 1 microsecond (including overhead in udelay).
*/
static void
-udelay1 (void) _naked
+udelay1 (void) __naked
{
- _asm ; lcall that got us here took 4 bus cycles
+ __asm ; lcall that got us here took 4 bus cycles
ret ; 4 bus cycles
- _endasm;
+ __endasm;
}
/*
@@ -51,9 +51,9 @@ udelay (unsigned char usecs)
* but explains the factor of 4 problem below).
*/
static void
-mdelay1 (void) _naked
+mdelay1 (void) __naked
{
- _asm
+ __asm
mov dptr,#(-1200 & 0xffff)
002$:
inc dptr ; 3 bus cycles
@@ -62,7 +62,7 @@ mdelay1 (void) _naked
jnz 002$ ; 3 bus cycles
ret
- _endasm;
+ __endasm;
}
void
diff --git a/firmware/fx2/common/eeprom_init.c b/firmware/fx2/common/eeprom_init.c
index 07902dc..e30ba14 100644
--- a/firmware/fx2/common/eeprom_init.c
+++ b/firmware/fx2/common/eeprom_init.c
@@ -28,7 +28,7 @@
* into hash1.
*/
#define USRP_HASH_SIZE 16
-xdata at USRP_HASH_SLOT_0_ADDR unsigned char hash0[USRP_HASH_SIZE];
+__xdata __at USRP_HASH_SLOT_0_ADDR unsigned char hash0[USRP_HASH_SIZE];
#define REG_RX_PWR_DN 1
diff --git a/firmware/fx2/common/fpga_load.h b/firmware/fx2/common/fpga_load.h
index 7c36a04..40ebf92 100644
--- a/firmware/fx2/common/fpga_load.h
+++ b/firmware/fx2/common/fpga_load.h
@@ -22,7 +22,7 @@
#define INCLUDED_FPGA_LOAD_H
unsigned char fpga_load_begin (void);
-unsigned char fpga_load_xfer (xdata unsigned char *p, unsigned char len);
+unsigned char fpga_load_xfer (__xdata unsigned char *p, unsigned char len);
unsigned char fpga_load_end (void);
#endif /* INCLUDED_FPGA_LOAD_H */
diff --git a/firmware/fx2/common/fx2regs.h b/firmware/fx2/common/fx2regs.h
index acbc0b8..67ad436 100644
--- a/firmware/fx2/common/fx2regs.h
+++ b/firmware/fx2/common/fx2regs.h
@@ -48,14 +48,14 @@
// The Ez-USB FX2 registers are defined here. We use FX2regs.h for register
// address allocation by using "#define ALLOCATE_EXTERN".
// When using "#define ALLOCATE_EXTERN", you get (for instance):
-// xdata volatile BYTE OUT7BUF[64] _at_ 0x7B40;
+// __xdata volatile BYTE OUT7BUF[64] _at_ 0x7B40;
// Such lines are created from FX2.h by using the preprocessor.
// Incidently, these lines will not generate any space in the resulting hex
// file; they just bind the symbols to the addresses for compilation.
// You just need to put "#define ALLOCATE_EXTERN" in your main program file;
// i.e. fw.c or a stand-alone C source file.
// Without "#define ALLOCATE_EXTERN", you just get the external reference:
-// extern xdata volatile BYTE OUT7BUF[64] ;// 0x7B40;
+// extern __xdata volatile BYTE OUT7BUF[64] ;// 0x7B40;
// This uses the concatenation operator "##" to insert a comment "//"
// to cut off the end of the line, "_at_ 0x7B40;", which is not wanted.
*/
@@ -63,7 +63,7 @@
#ifdef ALLOCATE_EXTERN
#define EXTERN
-#define _AT_(a) at a
+#define _AT_(a) __at a
#else
#define EXTERN extern
#define _AT_ ;/ ## /
@@ -72,162 +72,162 @@
typedef unsigned char BYTE;
typedef unsigned short WORD;
-EXTERN xdata _AT_(0xE400) volatile BYTE GPIF_WAVE_DATA[128];
-EXTERN xdata _AT_(0xE480) volatile BYTE RES_WAVEDATA_END ;
+EXTERN __xdata _AT_(0xE400) volatile BYTE GPIF_WAVE_DATA[128];
+EXTERN __xdata _AT_(0xE480) volatile BYTE RES_WAVEDATA_END ;
// General Configuration
-EXTERN xdata _AT_(0xE600) volatile BYTE CPUCS ; // Control & Status
-EXTERN xdata _AT_(0xE601) volatile BYTE IFCONFIG ; // Interface Configuration
-EXTERN xdata _AT_(0xE602) volatile BYTE PINFLAGSAB ; // FIFO FLAGA and FLAGB Assignments
-EXTERN xdata _AT_(0xE603) volatile BYTE PINFLAGSCD ; // FIFO FLAGC and FLAGD Assignments
-EXTERN xdata _AT_(0xE604) volatile BYTE FIFORESET ; // Restore FIFOS to default state
-EXTERN xdata _AT_(0xE605) volatile BYTE BREAKPT ; // Breakpoint
-EXTERN xdata _AT_(0xE606) volatile BYTE BPADDRH ; // Breakpoint Address H
-EXTERN xdata _AT_(0xE607) volatile BYTE BPADDRL ; // Breakpoint Address L
-EXTERN xdata _AT_(0xE608) volatile BYTE UART230 ; // 230 Kbaud clock for T0,T1,T2
-EXTERN xdata _AT_(0xE609) volatile BYTE FIFOPINPOLAR ; // FIFO polarities
-EXTERN xdata _AT_(0xE60A) volatile BYTE REVID ; // Chip Revision
-EXTERN xdata _AT_(0xE60B) volatile BYTE REVCTL ; // Chip Revision Control
+EXTERN __xdata _AT_(0xE600) volatile BYTE CPUCS ; // Control & Status
+EXTERN __xdata _AT_(0xE601) volatile BYTE IFCONFIG ; // Interface Configuration
+EXTERN __xdata _AT_(0xE602) volatile BYTE PINFLAGSAB ; // FIFO FLAGA and FLAGB Assignments
+EXTERN __xdata _AT_(0xE603) volatile BYTE PINFLAGSCD ; // FIFO FLAGC and FLAGD Assignments
+EXTERN __xdata _AT_(0xE604) volatile BYTE FIFORESET ; // Restore FIFOS to default state
+EXTERN __xdata _AT_(0xE605) volatile BYTE BREAKPT ; // Breakpoint
+EXTERN __xdata _AT_(0xE606) volatile BYTE BPADDRH ; // Breakpoint Address H
+EXTERN __xdata _AT_(0xE607) volatile BYTE BPADDRL ; // Breakpoint Address L
+EXTERN __xdata _AT_(0xE608) volatile BYTE UART230 ; // 230 Kbaud clock for T0,T1,T2
+EXTERN __xdata _AT_(0xE609) volatile BYTE FIFOPINPOLAR ; // FIFO polarities
+EXTERN __xdata _AT_(0xE60A) volatile BYTE REVID ; // Chip Revision
+EXTERN __xdata _AT_(0xE60B) volatile BYTE REVCTL ; // Chip Revision Control
// Endpoint Configuration
-EXTERN xdata _AT_(0xE610) volatile BYTE EP1OUTCFG ; // Endpoint 1-OUT Configuration
-EXTERN xdata _AT_(0xE611) volatile BYTE EP1INCFG ; // Endpoint 1-IN Configuration
-EXTERN xdata _AT_(0xE612) volatile BYTE EP2CFG ; // Endpoint 2 Configuration
-EXTERN xdata _AT_(0xE613) volatile BYTE EP4CFG ; // Endpoint 4 Configuration
-EXTERN xdata _AT_(0xE614) volatile BYTE EP6CFG ; // Endpoint 6 Configuration
-EXTERN xdata _AT_(0xE615) volatile BYTE EP8CFG ; // Endpoint 8 Configuration
-EXTERN xdata _AT_(0xE618) volatile BYTE EP2FIFOCFG ; // Endpoint 2 FIFO configuration
-EXTERN xdata _AT_(0xE619) volatile BYTE EP4FIFOCFG ; // Endpoint 4 FIFO configuration
-EXTERN xdata _AT_(0xE61A) volatile BYTE EP6FIFOCFG ; // Endpoint 6 FIFO configuration
-EXTERN xdata _AT_(0xE61B) volatile BYTE EP8FIFOCFG ; // Endpoint 8 FIFO configuration
-EXTERN xdata _AT_(0xE620) volatile BYTE EP2AUTOINLENH ; // Endpoint 2 Packet Length H (IN only)
-EXTERN xdata _AT_(0xE621) volatile BYTE EP2AUTOINLENL ; // Endpoint 2 Packet Length L (IN only)
-EXTERN xdata _AT_(0xE622) volatile BYTE EP4AUTOINLENH ; // Endpoint 4 Packet Length H (IN only)
-EXTERN xdata _AT_(0xE623) volatile BYTE EP4AUTOINLENL ; // Endpoint 4 Packet Length L (IN only)
-EXTERN xdata _AT_(0xE624) volatile BYTE EP6AUTOINLENH ; // Endpoint 6 Packet Length H (IN only)
-EXTERN xdata _AT_(0xE625) volatile BYTE EP6AUTOINLENL ; // Endpoint 6 Packet Length L (IN only)
-EXTERN xdata _AT_(0xE626) volatile BYTE EP8AUTOINLENH ; // Endpoint 8 Packet Length H (IN only)
-EXTERN xdata _AT_(0xE627) volatile BYTE EP8AUTOINLENL ; // Endpoint 8 Packet Length L (IN only)
-EXTERN xdata _AT_(0xE630) volatile BYTE EP2FIFOPFH ; // EP2 Programmable Flag trigger H
-EXTERN xdata _AT_(0xE631) volatile BYTE EP2FIFOPFL ; // EP2 Programmable Flag trigger L
-EXTERN xdata _AT_(0xE632) volatile BYTE EP4FIFOPFH ; // EP4 Programmable Flag trigger H
-EXTERN xdata _AT_(0xE633) volatile BYTE EP4FIFOPFL ; // EP4 Programmable Flag trigger L
-EXTERN xdata _AT_(0xE634) volatile BYTE EP6FIFOPFH ; // EP6 Programmable Flag trigger H
-EXTERN xdata _AT_(0xE635) volatile BYTE EP6FIFOPFL ; // EP6 Programmable Flag trigger L
-EXTERN xdata _AT_(0xE636) volatile BYTE EP8FIFOPFH ; // EP8 Programmable Flag trigger H
-EXTERN xdata _AT_(0xE637) volatile BYTE EP8FIFOPFL ; // EP8 Programmable Flag trigger L
-EXTERN xdata _AT_(0xE640) volatile BYTE EP2ISOINPKTS ; // EP2 (if ISO) IN Packets per frame (1-3)
-EXTERN xdata _AT_(0xE641) volatile BYTE EP4ISOINPKTS ; // EP4 (if ISO) IN Packets per frame (1-3)
-EXTERN xdata _AT_(0xE642) volatile BYTE EP6ISOINPKTS ; // EP6 (if ISO) IN Packets per frame (1-3)
-EXTERN xdata _AT_(0xE643) volatile BYTE EP8ISOINPKTS ; // EP8 (if ISO) IN Packets per frame (1-3)
-EXTERN xdata _AT_(0xE648) volatile BYTE INPKTEND ; // Force IN Packet End
-EXTERN xdata _AT_(0xE649) volatile BYTE OUTPKTEND ; // Force OUT Packet End
+EXTERN __xdata _AT_(0xE610) volatile BYTE EP1OUTCFG ; // Endpoint 1-OUT Configuration
+EXTERN __xdata _AT_(0xE611) volatile BYTE EP1INCFG ; // Endpoint 1-IN Configuration
+EXTERN __xdata _AT_(0xE612) volatile BYTE EP2CFG ; // Endpoint 2 Configuration
+EXTERN __xdata _AT_(0xE613) volatile BYTE EP4CFG ; // Endpoint 4 Configuration
+EXTERN __xdata _AT_(0xE614) volatile BYTE EP6CFG ; // Endpoint 6 Configuration
+EXTERN __xdata _AT_(0xE615) volatile BYTE EP8CFG ; // Endpoint 8 Configuration
+EXTERN __xdata _AT_(0xE618) volatile BYTE EP2FIFOCFG ; // Endpoint 2 FIFO configuration
+EXTERN __xdata _AT_(0xE619) volatile BYTE EP4FIFOCFG ; // Endpoint 4 FIFO configuration
+EXTERN __xdata _AT_(0xE61A) volatile BYTE EP6FIFOCFG ; // Endpoint 6 FIFO configuration
+EXTERN __xdata _AT_(0xE61B) volatile BYTE EP8FIFOCFG ; // Endpoint 8 FIFO configuration
+EXTERN __xdata _AT_(0xE620) volatile BYTE EP2AUTOINLENH ; // Endpoint 2 Packet Length H (IN only)
+EXTERN __xdata _AT_(0xE621) volatile BYTE EP2AUTOINLENL ; // Endpoint 2 Packet Length L (IN only)
+EXTERN __xdata _AT_(0xE622) volatile BYTE EP4AUTOINLENH ; // Endpoint 4 Packet Length H (IN only)
+EXTERN __xdata _AT_(0xE623) volatile BYTE EP4AUTOINLENL ; // Endpoint 4 Packet Length L (IN only)
+EXTERN __xdata _AT_(0xE624) volatile BYTE EP6AUTOINLENH ; // Endpoint 6 Packet Length H (IN only)
+EXTERN __xdata _AT_(0xE625) volatile BYTE EP6AUTOINLENL ; // Endpoint 6 Packet Length L (IN only)
+EXTERN __xdata _AT_(0xE626) volatile BYTE EP8AUTOINLENH ; // Endpoint 8 Packet Length H (IN only)
+EXTERN __xdata _AT_(0xE627) volatile BYTE EP8AUTOINLENL ; // Endpoint 8 Packet Length L (IN only)
+EXTERN __xdata _AT_(0xE630) volatile BYTE EP2FIFOPFH ; // EP2 Programmable Flag trigger H
+EXTERN __xdata _AT_(0xE631) volatile BYTE EP2FIFOPFL ; // EP2 Programmable Flag trigger L
+EXTERN __xdata _AT_(0xE632) volatile BYTE EP4FIFOPFH ; // EP4 Programmable Flag trigger H
+EXTERN __xdata _AT_(0xE633) volatile BYTE EP4FIFOPFL ; // EP4 Programmable Flag trigger L
+EXTERN __xdata _AT_(0xE634) volatile BYTE EP6FIFOPFH ; // EP6 Programmable Flag trigger H
+EXTERN __xdata _AT_(0xE635) volatile BYTE EP6FIFOPFL ; // EP6 Programmable Flag trigger L
+EXTERN __xdata _AT_(0xE636) volatile BYTE EP8FIFOPFH ; // EP8 Programmable Flag trigger H
+EXTERN __xdata _AT_(0xE637) volatile BYTE EP8FIFOPFL ; // EP8 Programmable Flag trigger L
+EXTERN __xdata _AT_(0xE640) volatile BYTE EP2ISOINPKTS ; // EP2 (if ISO) IN Packets per frame (1-3)
+EXTERN __xdata _AT_(0xE641) volatile BYTE EP4ISOINPKTS ; // EP4 (if ISO) IN Packets per frame (1-3)
+EXTERN __xdata _AT_(0xE642) volatile BYTE EP6ISOINPKTS ; // EP6 (if ISO) IN Packets per frame (1-3)
+EXTERN __xdata _AT_(0xE643) volatile BYTE EP8ISOINPKTS ; // EP8 (if ISO) IN Packets per frame (1-3)
+EXTERN __xdata _AT_(0xE648) volatile BYTE INPKTEND ; // Force IN Packet End
+EXTERN __xdata _AT_(0xE649) volatile BYTE OUTPKTEND ; // Force OUT Packet End
// Interrupts
-EXTERN xdata _AT_(0xE650) volatile BYTE EP2FIFOIE ; // Endpoint 2 Flag Interrupt Enable
-EXTERN xdata _AT_(0xE651) volatile BYTE EP2FIFOIRQ ; // Endpoint 2 Flag Interrupt Request
-EXTERN xdata _AT_(0xE652) volatile BYTE EP4FIFOIE ; // Endpoint 4 Flag Interrupt Enable
-EXTERN xdata _AT_(0xE653) volatile BYTE EP4FIFOIRQ ; // Endpoint 4 Flag Interrupt Request
-EXTERN xdata _AT_(0xE654) volatile BYTE EP6FIFOIE ; // Endpoint 6 Flag Interrupt Enable
-EXTERN xdata _AT_(0xE655) volatile BYTE EP6FIFOIRQ ; // Endpoint 6 Flag Interrupt Request
-EXTERN xdata _AT_(0xE656) volatile BYTE EP8FIFOIE ; // Endpoint 8 Flag Interrupt Enable
-EXTERN xdata _AT_(0xE657) volatile BYTE EP8FIFOIRQ ; // Endpoint 8 Flag Interrupt Request
-EXTERN xdata _AT_(0xE658) volatile BYTE IBNIE ; // IN-BULK-NAK Interrupt Enable
-EXTERN xdata _AT_(0xE659) volatile BYTE IBNIRQ ; // IN-BULK-NAK interrupt Request
-EXTERN xdata _AT_(0xE65A) volatile BYTE NAKIE ; // Endpoint Ping NAK interrupt Enable
-EXTERN xdata _AT_(0xE65B) volatile BYTE NAKIRQ ; // Endpoint Ping NAK interrupt Request
-EXTERN xdata _AT_(0xE65C) volatile BYTE USBIE ; // USB Int Enables
-EXTERN xdata _AT_(0xE65D) volatile BYTE USBIRQ ; // USB Interrupt Requests
-EXTERN xdata _AT_(0xE65E) volatile BYTE EPIE ; // Endpoint Interrupt Enables
-EXTERN xdata _AT_(0xE65F) volatile BYTE EPIRQ ; // Endpoint Interrupt Requests
-EXTERN xdata _AT_(0xE660) volatile BYTE GPIFIE ; // GPIF Interrupt Enable
-EXTERN xdata _AT_(0xE661) volatile BYTE GPIFIRQ ; // GPIF Interrupt Request
-EXTERN xdata _AT_(0xE662) volatile BYTE USBERRIE ; // USB Error Interrupt Enables
-EXTERN xdata _AT_(0xE663) volatile BYTE USBERRIRQ ; // USB Error Interrupt Requests
-EXTERN xdata _AT_(0xE664) volatile BYTE ERRCNTLIM ; // USB Error counter and limit
-EXTERN xdata _AT_(0xE665) volatile BYTE CLRERRCNT ; // Clear Error Counter EC[3..0]
-EXTERN xdata _AT_(0xE666) volatile BYTE INT2IVEC ; // Interupt 2 (USB) Autovector
-EXTERN xdata _AT_(0xE667) volatile BYTE INT4IVEC ; // Interupt 4 (FIFOS & GPIF) Autovector
-EXTERN xdata _AT_(0xE668) volatile BYTE INTSETUP ; // Interrupt 2&4 Setup
+EXTERN __xdata _AT_(0xE650) volatile BYTE EP2FIFOIE ; // Endpoint 2 Flag Interrupt Enable
+EXTERN __xdata _AT_(0xE651) volatile BYTE EP2FIFOIRQ ; // Endpoint 2 Flag Interrupt Request
+EXTERN __xdata _AT_(0xE652) volatile BYTE EP4FIFOIE ; // Endpoint 4 Flag Interrupt Enable
+EXTERN __xdata _AT_(0xE653) volatile BYTE EP4FIFOIRQ ; // Endpoint 4 Flag Interrupt Request
+EXTERN __xdata _AT_(0xE654) volatile BYTE EP6FIFOIE ; // Endpoint 6 Flag Interrupt Enable
+EXTERN __xdata _AT_(0xE655) volatile BYTE EP6FIFOIRQ ; // Endpoint 6 Flag Interrupt Request
+EXTERN __xdata _AT_(0xE656) volatile BYTE EP8FIFOIE ; // Endpoint 8 Flag Interrupt Enable
+EXTERN __xdata _AT_(0xE657) volatile BYTE EP8FIFOIRQ ; // Endpoint 8 Flag Interrupt Request
+EXTERN __xdata _AT_(0xE658) volatile BYTE IBNIE ; // IN-BULK-NAK Interrupt Enable
+EXTERN __xdata _AT_(0xE659) volatile BYTE IBNIRQ ; // IN-BULK-NAK interrupt Request
+EXTERN __xdata _AT_(0xE65A) volatile BYTE NAKIE ; // Endpoint Ping NAK interrupt Enable
+EXTERN __xdata _AT_(0xE65B) volatile BYTE NAKIRQ ; // Endpoint Ping NAK interrupt Request
+EXTERN __xdata _AT_(0xE65C) volatile BYTE USBIE ; // USB Int Enables
+EXTERN __xdata _AT_(0xE65D) volatile BYTE USBIRQ ; // USB Interrupt Requests
+EXTERN __xdata _AT_(0xE65E) volatile BYTE EPIE ; // Endpoint Interrupt Enables
+EXTERN __xdata _AT_(0xE65F) volatile BYTE EPIRQ ; // Endpoint Interrupt Requests
+EXTERN __xdata _AT_(0xE660) volatile BYTE GPIFIE ; // GPIF Interrupt Enable
+EXTERN __xdata _AT_(0xE661) volatile BYTE GPIFIRQ ; // GPIF Interrupt Request
+EXTERN __xdata _AT_(0xE662) volatile BYTE USBERRIE ; // USB Error Interrupt Enables
+EXTERN __xdata _AT_(0xE663) volatile BYTE USBERRIRQ ; // USB Error Interrupt Requests
+EXTERN __xdata _AT_(0xE664) volatile BYTE ERRCNTLIM ; // USB Error counter and limit
+EXTERN __xdata _AT_(0xE665) volatile BYTE CLRERRCNT ; // Clear Error Counter EC[3..0]
+EXTERN __xdata _AT_(0xE666) volatile BYTE INT2IVEC ; // Interupt 2 (USB) Autovector
+EXTERN __xdata _AT_(0xE667) volatile BYTE INT4IVEC ; // Interupt 4 (FIFOS & GPIF) Autovector
+EXTERN __xdata _AT_(0xE668) volatile BYTE INTSETUP ; // Interrupt 2&4 Setup
// Input/Output
-EXTERN xdata _AT_(0xE670) volatile BYTE PORTACFG ; // I/O PORTA Alternate Configuration
-EXTERN xdata _AT_(0xE671) volatile BYTE PORTCCFG ; // I/O PORTC Alternate Configuration
-EXTERN xdata _AT_(0xE672) volatile BYTE PORTECFG ; // I/O PORTE Alternate Configuration
-EXTERN xdata _AT_(0xE678) volatile BYTE I2CS ; // Control & Status
-EXTERN xdata _AT_(0xE679) volatile BYTE I2DAT ; // Data
-EXTERN xdata _AT_(0xE67A) volatile BYTE I2CTL ; // I2C Control
-EXTERN xdata _AT_(0xE67B) volatile BYTE XAUTODAT1 ; // Autoptr1 MOVX access
-EXTERN xdata _AT_(0xE67C) volatile BYTE XAUTODAT2 ; // Autoptr2 MOVX access
+EXTERN __xdata _AT_(0xE670) volatile BYTE PORTACFG ; // I/O PORTA Alternate Configuration
+EXTERN __xdata _AT_(0xE671) volatile BYTE PORTCCFG ; // I/O PORTC Alternate Configuration
+EXTERN __xdata _AT_(0xE672) volatile BYTE PORTECFG ; // I/O PORTE Alternate Configuration
+EXTERN __xdata _AT_(0xE678) volatile BYTE I2CS ; // Control & Status
+EXTERN __xdata _AT_(0xE679) volatile BYTE I2DAT ; // Data
+EXTERN __xdata _AT_(0xE67A) volatile BYTE I2CTL ; // I2C Control
+EXTERN __xdata _AT_(0xE67B) volatile BYTE XAUTODAT1 ; // Autoptr1 MOVX access
+EXTERN __xdata _AT_(0xE67C) volatile BYTE XAUTODAT2 ; // Autoptr2 MOVX access
#define EXTAUTODAT1 XAUTODAT1
#define EXTAUTODAT2 XAUTODAT2
// USB Control
-EXTERN xdata _AT_(0xE680) volatile BYTE USBCS ; // USB Control & Status
-EXTERN xdata _AT_(0xE681) volatile BYTE SUSPEND ; // Put chip into suspend
-EXTERN xdata _AT_(0xE682) volatile BYTE WAKEUPCS ; // Wakeup source and polarity
-EXTERN xdata _AT_(0xE683) volatile BYTE TOGCTL ; // Toggle Control
-EXTERN xdata _AT_(0xE684) volatile BYTE USBFRAMEH ; // USB Frame count H
-EXTERN xdata _AT_(0xE685) volatile BYTE USBFRAMEL ; // USB Frame count L
-EXTERN xdata _AT_(0xE686) volatile BYTE MICROFRAME ; // Microframe count, 0-7
-EXTERN xdata _AT_(0xE687) volatile BYTE FNADDR ; // USB Function address
+EXTERN __xdata _AT_(0xE680) volatile BYTE USBCS ; // USB Control & Status
+EXTERN __xdata _AT_(0xE681) volatile BYTE SUSPEND ; // Put chip into suspend
+EXTERN __xdata _AT_(0xE682) volatile BYTE WAKEUPCS ; // Wakeup source and polarity
+EXTERN __xdata _AT_(0xE683) volatile BYTE TOGCTL ; // Toggle Control
+EXTERN __xdata _AT_(0xE684) volatile BYTE USBFRAMEH ; // USB Frame count H
+EXTERN __xdata _AT_(0xE685) volatile BYTE USBFRAMEL ; // USB Frame count L
+EXTERN __xdata _AT_(0xE686) volatile BYTE MICROFRAME ; // Microframe count, 0-7
+EXTERN __xdata _AT_(0xE687) volatile BYTE FNADDR ; // USB Function address
// Endpoints
-EXTERN xdata _AT_(0xE68A) volatile BYTE EP0BCH ; // Endpoint 0 Byte Count H
-EXTERN xdata _AT_(0xE68B) volatile BYTE EP0BCL ; // Endpoint 0 Byte Count L
-EXTERN xdata _AT_(0xE68D) volatile BYTE EP1OUTBC ; // Endpoint 1 OUT Byte Count
-EXTERN xdata _AT_(0xE68F) volatile BYTE EP1INBC ; // Endpoint 1 IN Byte Count
-EXTERN xdata _AT_(0xE690) volatile BYTE EP2BCH ; // Endpoint 2 Byte Count H
-EXTERN xdata _AT_(0xE691) volatile BYTE EP2BCL ; // Endpoint 2 Byte Count L
-EXTERN xdata _AT_(0xE694) volatile BYTE EP4BCH ; // Endpoint 4 Byte Count H
-EXTERN xdata _AT_(0xE695) volatile BYTE EP4BCL ; // Endpoint 4 Byte Count L
-EXTERN xdata _AT_(0xE698) volatile BYTE EP6BCH ; // Endpoint 6 Byte Count H
-EXTERN xdata _AT_(0xE699) volatile BYTE EP6BCL ; // Endpoint 6 Byte Count L
-EXTERN xdata _AT_(0xE69C) volatile BYTE EP8BCH ; // Endpoint 8 Byte Count H
-EXTERN xdata _AT_(0xE69D) volatile BYTE EP8BCL ; // Endpoint 8 Byte Count L
-EXTERN xdata _AT_(0xE6A0) volatile BYTE EP0CS ; // Endpoint Control and Status
-EXTERN xdata _AT_(0xE6A1) volatile BYTE EP1OUTCS ; // Endpoint 1 OUT Control and Status
-EXTERN xdata _AT_(0xE6A2) volatile BYTE EP1INCS ; // Endpoint 1 IN Control and Status
-EXTERN xdata _AT_(0xE6A3) volatile BYTE EP2CS ; // Endpoint 2 Control and Status
-EXTERN xdata _AT_(0xE6A4) volatile BYTE EP4CS ; // Endpoint 4 Control and Status
-EXTERN xdata _AT_(0xE6A5) volatile BYTE EP6CS ; // Endpoint 6 Control and Status
-EXTERN xdata _AT_(0xE6A6) volatile BYTE EP8CS ; // Endpoint 8 Control and Status
-EXTERN xdata _AT_(0xE6A7) volatile BYTE EP2FIFOFLGS ; // Endpoint 2 Flags
-EXTERN xdata _AT_(0xE6A8) volatile BYTE EP4FIFOFLGS ; // Endpoint 4 Flags
-EXTERN xdata _AT_(0xE6A9) volatile BYTE EP6FIFOFLGS ; // Endpoint 6 Flags
-EXTERN xdata _AT_(0xE6AA) volatile BYTE EP8FIFOFLGS ; // Endpoint 8 Flags
-EXTERN xdata _AT_(0xE6AB) volatile BYTE EP2FIFOBCH ; // EP2 FIFO total byte count H
-EXTERN xdata _AT_(0xE6AC) volatile BYTE EP2FIFOBCL ; // EP2 FIFO total byte count L
-EXTERN xdata _AT_(0xE6AD) volatile BYTE EP4FIFOBCH ; // EP4 FIFO total byte count H
-EXTERN xdata _AT_(0xE6AE) volatile BYTE EP4FIFOBCL ; // EP4 FIFO total byte count L
-EXTERN xdata _AT_(0xE6AF) volatile BYTE EP6FIFOBCH ; // EP6 FIFO total byte count H
-EXTERN xdata _AT_(0xE6B0) volatile BYTE EP6FIFOBCL ; // EP6 FIFO total byte count L
-EXTERN xdata _AT_(0xE6B1) volatile BYTE EP8FIFOBCH ; // EP8 FIFO total byte count H
-EXTERN xdata _AT_(0xE6B2) volatile BYTE EP8FIFOBCL ; // EP8 FIFO total byte count L
-EXTERN xdata _AT_(0xE6B3) volatile BYTE SUDPTRH ; // Setup Data Pointer high address byte
-EXTERN xdata _AT_(0xE6B4) volatile BYTE SUDPTRL ; // Setup Data Pointer low address byte
-EXTERN xdata _AT_(0xE6B5) volatile BYTE SUDPTRCTL ; // Setup Data Pointer Auto Mode
-EXTERN xdata _AT_(0xE6B8) volatile BYTE SETUPDAT[8] ; // 8 bytes of SETUP data
+EXTERN __xdata _AT_(0xE68A) volatile BYTE EP0BCH ; // Endpoint 0 Byte Count H
+EXTERN __xdata _AT_(0xE68B) volatile BYTE EP0BCL ; // Endpoint 0 Byte Count L
+EXTERN __xdata _AT_(0xE68D) volatile BYTE EP1OUTBC ; // Endpoint 1 OUT Byte Count
+EXTERN __xdata _AT_(0xE68F) volatile BYTE EP1INBC ; // Endpoint 1 IN Byte Count
+EXTERN __xdata _AT_(0xE690) volatile BYTE EP2BCH ; // Endpoint 2 Byte Count H
+EXTERN __xdata _AT_(0xE691) volatile BYTE EP2BCL ; // Endpoint 2 Byte Count L
+EXTERN __xdata _AT_(0xE694) volatile BYTE EP4BCH ; // Endpoint 4 Byte Count H
+EXTERN __xdata _AT_(0xE695) volatile BYTE EP4BCL ; // Endpoint 4 Byte Count L
+EXTERN __xdata _AT_(0xE698) volatile BYTE EP6BCH ; // Endpoint 6 Byte Count H
+EXTERN __xdata _AT_(0xE699) volatile BYTE EP6BCL ; // Endpoint 6 Byte Count L
+EXTERN __xdata _AT_(0xE69C) volatile BYTE EP8BCH ; // Endpoint 8 Byte Count H
+EXTERN __xdata _AT_(0xE69D) volatile BYTE EP8BCL ; // Endpoint 8 Byte Count L
+EXTERN __xdata _AT_(0xE6A0) volatile BYTE EP0CS ; // Endpoint Control and Status
+EXTERN __xdata _AT_(0xE6A1) volatile BYTE EP1OUTCS ; // Endpoint 1 OUT Control and Status
+EXTERN __xdata _AT_(0xE6A2) volatile BYTE EP1INCS ; // Endpoint 1 IN Control and Status
+EXTERN __xdata _AT_(0xE6A3) volatile BYTE EP2CS ; // Endpoint 2 Control and Status
+EXTERN __xdata _AT_(0xE6A4) volatile BYTE EP4CS ; // Endpoint 4 Control and Status
+EXTERN __xdata _AT_(0xE6A5) volatile BYTE EP6CS ; // Endpoint 6 Control and Status
+EXTERN __xdata _AT_(0xE6A6) volatile BYTE EP8CS ; // Endpoint 8 Control and Status
+EXTERN __xdata _AT_(0xE6A7) volatile BYTE EP2FIFOFLGS ; // Endpoint 2 Flags
+EXTERN __xdata _AT_(0xE6A8) volatile BYTE EP4FIFOFLGS ; // Endpoint 4 Flags
+EXTERN __xdata _AT_(0xE6A9) volatile BYTE EP6FIFOFLGS ; // Endpoint 6 Flags
+EXTERN __xdata _AT_(0xE6AA) volatile BYTE EP8FIFOFLGS ; // Endpoint 8 Flags
+EXTERN __xdata _AT_(0xE6AB) volatile BYTE EP2FIFOBCH ; // EP2 FIFO total byte count H
+EXTERN __xdata _AT_(0xE6AC) volatile BYTE EP2FIFOBCL ; // EP2 FIFO total byte count L
+EXTERN __xdata _AT_(0xE6AD) volatile BYTE EP4FIFOBCH ; // EP4 FIFO total byte count H
+EXTERN __xdata _AT_(0xE6AE) volatile BYTE EP4FIFOBCL ; // EP4 FIFO total byte count L
+EXTERN __xdata _AT_(0xE6AF) volatile BYTE EP6FIFOBCH ; // EP6 FIFO total byte count H
+EXTERN __xdata _AT_(0xE6B0) volatile BYTE EP6FIFOBCL ; // EP6 FIFO total byte count L
+EXTERN __xdata _AT_(0xE6B1) volatile BYTE EP8FIFOBCH ; // EP8 FIFO total byte count H
+EXTERN __xdata _AT_(0xE6B2) volatile BYTE EP8FIFOBCL ; // EP8 FIFO total byte count L
+EXTERN __xdata _AT_(0xE6B3) volatile BYTE SUDPTRH ; // Setup Data Pointer high address byte
+EXTERN __xdata _AT_(0xE6B4) volatile BYTE SUDPTRL ; // Setup Data Pointer low address byte
+EXTERN __xdata _AT_(0xE6B5) volatile BYTE SUDPTRCTL ; // Setup Data Pointer Auto Mode
+EXTERN __xdata _AT_(0xE6B8) volatile BYTE SETUPDAT[8] ; // 8 bytes of SETUP data
// GPIF
-EXTERN xdata _AT_(0xE6C0) volatile BYTE GPIFWFSELECT ; // Waveform Selector
-EXTERN xdata _AT_(0xE6C1) volatile BYTE GPIFIDLECS ; // GPIF Done, GPIF IDLE drive mode
-EXTERN xdata _AT_(0xE6C2) volatile BYTE GPIFIDLECTL ; // Inactive Bus, CTL states
-EXTERN xdata _AT_(0xE6C3) volatile BYTE GPIFCTLCFG ; // CTL OUT pin drive
-EXTERN xdata _AT_(0xE6C4) volatile BYTE GPIFADRH ; // GPIF Address H
-EXTERN xdata _AT_(0xE6C5) volatile BYTE GPIFADRL ; // GPIF Address L
+EXTERN __xdata _AT_(0xE6C0) volatile BYTE GPIFWFSELECT ; // Waveform Selector
+EXTERN __xdata _AT_(0xE6C1) volatile BYTE GPIFIDLECS ; // GPIF Done, GPIF IDLE drive mode
+EXTERN __xdata _AT_(0xE6C2) volatile BYTE GPIFIDLECTL ; // Inactive Bus, CTL states
+EXTERN __xdata _AT_(0xE6C3) volatile BYTE GPIFCTLCFG ; // CTL OUT pin drive
+EXTERN __xdata _AT_(0xE6C4) volatile BYTE GPIFADRH ; // GPIF Address H
+EXTERN __xdata _AT_(0xE6C5) volatile BYTE GPIFADRL ; // GPIF Address L
-EXTERN xdata _AT_(0xE6CE) volatile BYTE GPIFTCB3 ; // GPIF Transaction Count Byte 3
-EXTERN xdata _AT_(0xE6CF) volatile BYTE GPIFTCB2 ; // GPIF Transaction Count Byte 2
-EXTERN xdata _AT_(0xE6D0) volatile BYTE GPIFTCB1 ; // GPIF Transaction Count Byte 1
-EXTERN xdata _AT_(0xE6D1) volatile BYTE GPIFTCB0 ; // GPIF Transaction Count Byte 0
+EXTERN __xdata _AT_(0xE6CE) volatile BYTE GPIFTCB3 ; // GPIF Transaction Count Byte 3
+EXTERN __xdata _AT_(0xE6CF) volatile BYTE GPIFTCB2 ; // GPIF Transaction Count Byte 2
+EXTERN __xdata _AT_(0xE6D0) volatile BYTE GPIFTCB1 ; // GPIF Transaction Count Byte 1
+EXTERN __xdata _AT_(0xE6D1) volatile BYTE GPIFTCB0 ; // GPIF Transaction Count Byte 0
#define EP2GPIFTCH GPIFTCB1 // these are here for backwards compatibility
#define EP2GPIFTCL GPIFTCB0 // before REVE silicon (ie. REVB and REVD)
@@ -238,68 +238,68 @@ EXTERN xdata _AT_(0xE6D1) volatile BYTE GPIFTCB0 ; // GPIF Transaction
#define EP8GPIFTCH GPIFTCB1 // these are here for backwards compatibility
#define EP8GPIFTCL GPIFTCB0 // before REVE silicon (ie. REVB and REVD)
-// EXTERN xdata volatile BYTE EP2GPIFTCH _AT_ 0xE6D0; // EP2 GPIF Transaction Count High
-// EXTERN xdata volatile BYTE EP2GPIFTCL _AT_ 0xE6D1; // EP2 GPIF Transaction Count Low
-EXTERN xdata _AT_(0xE6D2) volatile BYTE EP2GPIFFLGSEL ; // EP2 GPIF Flag select
-EXTERN xdata _AT_(0xE6D3) volatile BYTE EP2GPIFPFSTOP ; // Stop GPIF EP2 transaction on prog. flag
-EXTERN xdata _AT_(0xE6D4) volatile BYTE EP2GPIFTRIG ; // EP2 FIFO Trigger
-// EXTERN xdata volatile BYTE EP4GPIFTCH _AT_ 0xE6D8; // EP4 GPIF Transaction Count High
-// EXTERN xdata volatile BYTE EP4GPIFTCL _AT_ 0xE6D9; // EP4 GPIF Transactionr Count Low
-EXTERN xdata _AT_(0xE6DA) volatile BYTE EP4GPIFFLGSEL ; // EP4 GPIF Flag select
-EXTERN xdata _AT_(0xE6DB) volatile BYTE EP4GPIFPFSTOP ; // Stop GPIF EP4 transaction on prog. flag
-EXTERN xdata _AT_(0xE6DC) volatile BYTE EP4GPIFTRIG ; // EP4 FIFO Trigger
-// EXTERN xdata volatile BYTE EP6GPIFTCH _AT_ 0xE6E0; // EP6 GPIF Transaction Count High
-// EXTERN xdata volatile BYTE EP6GPIFTCL _AT_ 0xE6E1; // EP6 GPIF Transaction Count Low
-EXTERN xdata _AT_(0xE6E2) volatile BYTE EP6GPIFFLGSEL ; // EP6 GPIF Flag select
-EXTERN xdata _AT_(0xE6E3) volatile BYTE EP6GPIFPFSTOP ; // Stop GPIF EP6 transaction on prog. flag
-EXTERN xdata _AT_(0xE6E4) volatile BYTE EP6GPIFTRIG ; // EP6 FIFO Trigger
-// EXTERN xdata volatile BYTE EP8GPIFTCH _AT_ 0xE6E8; // EP8 GPIF Transaction Count High
-// EXTERN xdata volatile BYTE EP8GPIFTCL _AT_ 0xE6E9; // EP8GPIF Transaction Count Low
-EXTERN xdata _AT_(0xE6EA) volatile BYTE EP8GPIFFLGSEL ; // EP8 GPIF Flag select
-EXTERN xdata _AT_(0xE6EB) volatile BYTE EP8GPIFPFSTOP ; // Stop GPIF EP8 transaction on prog. flag
-EXTERN xdata _AT_(0xE6EC) volatile BYTE EP8GPIFTRIG ; // EP8 FIFO Trigger
-EXTERN xdata _AT_(0xE6F0) volatile BYTE XGPIFSGLDATH ; // GPIF Data H (16-bit mode only)
-EXTERN xdata _AT_(0xE6F1) volatile BYTE XGPIFSGLDATLX ; // Read/Write GPIF Data L & trigger transac
-EXTERN xdata _AT_(0xE6F2) volatile BYTE XGPIFSGLDATLNOX ; // Read GPIF Data L, no transac trigger
-EXTERN xdata _AT_(0xE6F3) volatile BYTE GPIFREADYCFG ; // Internal RDY,Sync/Async, RDY5CFG
-EXTERN xdata _AT_(0xE6F4) volatile BYTE GPIFREADYSTAT ; // RDY pin states
-EXTERN xdata _AT_(0xE6F5) volatile BYTE GPIFABORT ; // Abort GPIF cycles
+// EXTERN __xdata volatile BYTE EP2GPIFTCH _AT_ 0xE6D0; // EP2 GPIF Transaction Count High
+// EXTERN __xdata volatile BYTE EP2GPIFTCL _AT_ 0xE6D1; // EP2 GPIF Transaction Count Low
+EXTERN __xdata _AT_(0xE6D2) volatile BYTE EP2GPIFFLGSEL ; // EP2 GPIF Flag select
+EXTERN __xdata _AT_(0xE6D3) volatile BYTE EP2GPIFPFSTOP ; // Stop GPIF EP2 transaction on prog. flag
+EXTERN __xdata _AT_(0xE6D4) volatile BYTE EP2GPIFTRIG ; // EP2 FIFO Trigger
+// EXTERN __xdata volatile BYTE EP4GPIFTCH _AT_ 0xE6D8; // EP4 GPIF Transaction Count High
+// EXTERN __xdata volatile BYTE EP4GPIFTCL _AT_ 0xE6D9; // EP4 GPIF Transactionr Count Low
+EXTERN __xdata _AT_(0xE6DA) volatile BYTE EP4GPIFFLGSEL ; // EP4 GPIF Flag select
+EXTERN __xdata _AT_(0xE6DB) volatile BYTE EP4GPIFPFSTOP ; // Stop GPIF EP4 transaction on prog. flag
+EXTERN __xdata _AT_(0xE6DC) volatile BYTE EP4GPIFTRIG ; // EP4 FIFO Trigger
+// EXTERN __xdata volatile BYTE EP6GPIFTCH _AT_ 0xE6E0; // EP6 GPIF Transaction Count High
+// EXTERN __xdata volatile BYTE EP6GPIFTCL _AT_ 0xE6E1; // EP6 GPIF Transaction Count Low
+EXTERN __xdata _AT_(0xE6E2) volatile BYTE EP6GPIFFLGSEL ; // EP6 GPIF Flag select
+EXTERN __xdata _AT_(0xE6E3) volatile BYTE EP6GPIFPFSTOP ; // Stop GPIF EP6 transaction on prog. flag
+EXTERN __xdata _AT_(0xE6E4) volatile BYTE EP6GPIFTRIG ; // EP6 FIFO Trigger
+// EXTERN __xdata volatile BYTE EP8GPIFTCH _AT_ 0xE6E8; // EP8 GPIF Transaction Count High
+// EXTERN __xdata volatile BYTE EP8GPIFTCL _AT_ 0xE6E9; // EP8GPIF Transaction Count Low
+EXTERN __xdata _AT_(0xE6EA) volatile BYTE EP8GPIFFLGSEL ; // EP8 GPIF Flag select
+EXTERN __xdata _AT_(0xE6EB) volatile BYTE EP8GPIFPFSTOP ; // Stop GPIF EP8 transaction on prog. flag
+EXTERN __xdata _AT_(0xE6EC) volatile BYTE EP8GPIFTRIG ; // EP8 FIFO Trigger
+EXTERN __xdata _AT_(0xE6F0) volatile BYTE XGPIFSGLDATH ; // GPIF Data H (16-bit mode only)
+EXTERN __xdata _AT_(0xE6F1) volatile BYTE XGPIFSGLDATLX ; // Read/Write GPIF Data L & trigger transac
+EXTERN __xdata _AT_(0xE6F2) volatile BYTE XGPIFSGLDATLNOX ; // Read GPIF Data L, no transac trigger
+EXTERN __xdata _AT_(0xE6F3) volatile BYTE GPIFREADYCFG ; // Internal RDY,Sync/Async, RDY5CFG
+EXTERN __xdata _AT_(0xE6F4) volatile BYTE GPIFREADYSTAT ; // RDY pin states
+EXTERN __xdata _AT_(0xE6F5) volatile BYTE GPIFABORT ; // Abort GPIF cycles
// UDMA
-EXTERN xdata _AT_(0xE6C6) volatile BYTE FLOWSTATE ; //Defines GPIF flow state
-EXTERN xdata _AT_(0xE6C7) volatile BYTE FLOWLOGIC ; //Defines flow/hold decision criteria
-EXTERN xdata _AT_(0xE6C8) volatile BYTE FLOWEQ0CTL ; //CTL states during active flow state
-EXTERN xdata _AT_(0xE6C9) volatile BYTE FLOWEQ1CTL ; //CTL states during hold flow state
-EXTERN xdata _AT_(0xE6CA) volatile BYTE FLOWHOLDOFF ;
-EXTERN xdata _AT_(0xE6CB) volatile BYTE FLOWSTB ; //CTL/RDY Signal to use as master data strobe
-EXTERN xdata _AT_(0xE6CC) volatile BYTE FLOWSTBEDGE ; //Defines active master strobe edge
-EXTERN xdata _AT_(0xE6CD) volatile BYTE FLOWSTBHPERIOD ; //Half Period of output master strobe
-EXTERN xdata _AT_(0xE60C) volatile BYTE GPIFHOLDAMOUNT ; //Data delay shift
-EXTERN xdata _AT_(0xE67D) volatile BYTE UDMACRCH ; //CRC Upper byte
-EXTERN xdata _AT_(0xE67E) volatile BYTE UDMACRCL ; //CRC Lower byte
-EXTERN xdata _AT_(0xE67F) volatile BYTE UDMACRCQUAL ; //UDMA In only, host terminated use only
+EXTERN __xdata _AT_(0xE6C6) volatile BYTE FLOWSTATE ; //Defines GPIF flow state
+EXTERN __xdata _AT_(0xE6C7) volatile BYTE FLOWLOGIC ; //Defines flow/hold decision criteria
+EXTERN __xdata _AT_(0xE6C8) volatile BYTE FLOWEQ0CTL ; //CTL states during active flow state
+EXTERN __xdata _AT_(0xE6C9) volatile BYTE FLOWEQ1CTL ; //CTL states during hold flow state
+EXTERN __xdata _AT_(0xE6CA) volatile BYTE FLOWHOLDOFF ;
+EXTERN __xdata _AT_(0xE6CB) volatile BYTE FLOWSTB ; //CTL/RDY Signal to use as master data strobe
+EXTERN __xdata _AT_(0xE6CC) volatile BYTE FLOWSTBEDGE ; //Defines active master strobe edge
+EXTERN __xdata _AT_(0xE6CD) volatile BYTE FLOWSTBHPERIOD ; //Half Period of output master strobe
+EXTERN __xdata _AT_(0xE60C) volatile BYTE GPIFHOLDAMOUNT ; //Data delay shift
+EXTERN __xdata _AT_(0xE67D) volatile BYTE UDMACRCH ; //CRC Upper byte
+EXTERN __xdata _AT_(0xE67E) volatile BYTE UDMACRCL ; //CRC Lower byte
+EXTERN __xdata _AT_(0xE67F) volatile BYTE UDMACRCQUAL ; //UDMA In only, host terminated use only
// Debug/Test
-EXTERN xdata _AT_(0xE6F8) volatile BYTE DBUG ; // Debug
-EXTERN xdata _AT_(0xE6F9) volatile BYTE TESTCFG ; // Test configuration
-EXTERN xdata _AT_(0xE6FA) volatile BYTE USBTEST ; // USB Test Modes
-EXTERN xdata _AT_(0xE6FB) volatile BYTE CT1 ; // Chirp Test--Override
-EXTERN xdata _AT_(0xE6FC) volatile BYTE CT2 ; // Chirp Test--FSM
-EXTERN xdata _AT_(0xE6FD) volatile BYTE CT3 ; // Chirp Test--Control Signals
-EXTERN xdata _AT_(0xE6FE) volatile BYTE CT4 ; // Chirp Test--Inputs
+EXTERN __xdata _AT_(0xE6F8) volatile BYTE DBUG ; // Debug
+EXTERN __xdata _AT_(0xE6F9) volatile BYTE TESTCFG ; // Test configuration
+EXTERN __xdata _AT_(0xE6FA) volatile BYTE USBTEST ; // USB Test Modes
+EXTERN __xdata _AT_(0xE6FB) volatile BYTE CT1 ; // Chirp Test--Override
+EXTERN __xdata _AT_(0xE6FC) volatile BYTE CT2 ; // Chirp Test--FSM
+EXTERN __xdata _AT_(0xE6FD) volatile BYTE CT3 ; // Chirp Test--Control Signals
+EXTERN __xdata _AT_(0xE6FE) volatile BYTE CT4 ; // Chirp Test--Inputs
// Endpoint Buffers
-EXTERN xdata _AT_(0xE740) volatile BYTE EP0BUF[64] ; // EP0 IN-OUT buffer
-EXTERN xdata _AT_(0xE780) volatile BYTE EP1OUTBUF[64] ; // EP1-OUT buffer
-EXTERN xdata _AT_(0xE7C0) volatile BYTE EP1INBUF[64] ; // EP1-IN buffer
-EXTERN xdata _AT_(0xF000) volatile BYTE EP2FIFOBUF[1024] ; // 512/1024-byte EP2 buffer (IN or OUT)
-EXTERN xdata _AT_(0xF400) volatile BYTE EP4FIFOBUF[1024] ; // 512 byte EP4 buffer (IN or OUT)
-EXTERN xdata _AT_(0xF800) volatile BYTE EP6FIFOBUF[1024] ; // 512/1024-byte EP6 buffer (IN or OUT)
-EXTERN xdata _AT_(0xFC00) volatile BYTE EP8FIFOBUF[1024] ; // 512 byte EP8 buffer (IN or OUT)
+EXTERN __xdata _AT_(0xE740) volatile BYTE EP0BUF[64] ; // EP0 IN-OUT buffer
+EXTERN __xdata _AT_(0xE780) volatile BYTE EP1OUTBUF[64] ; // EP1-OUT buffer
+EXTERN __xdata _AT_(0xE7C0) volatile BYTE EP1INBUF[64] ; // EP1-IN buffer
+EXTERN __xdata _AT_(0xF000) volatile BYTE EP2FIFOBUF[1024] ; // 512/1024-byte EP2 buffer (IN or OUT)
+EXTERN __xdata _AT_(0xF400) volatile BYTE EP4FIFOBUF[1024] ; // 512 byte EP4 buffer (IN or OUT)
+EXTERN __xdata _AT_(0xF800) volatile BYTE EP6FIFOBUF[1024] ; // 512/1024-byte EP6 buffer (IN or OUT)
+EXTERN __xdata _AT_(0xFC00) volatile BYTE EP8FIFOBUF[1024] ; // 512 byte EP8 buffer (IN or OUT)
#undef EXTERN
#undef _AT_
@@ -312,201 +312,201 @@ EXTERN xdata _AT_(0xFC00) volatile BYTE EP8FIFOBUF[1024] ; // 512 byte EP8 buf
"ezregs.inc" which includes the same basic information for assembly inclusion.
-----------------------------------------------------------------------------*/
-sfr at 0x80 IOA;
-sfr at 0x81 SP;
-sfr at 0x82 DPL;
-sfr at 0x83 DPH;
-sfr at 0x84 DPL1;
-sfr at 0x85 DPH1;
-sfr at 0x86 DPS;
+__sfr __at 0x80 IOA;
+__sfr __at 0x81 SP;
+__sfr __at 0x82 DPL;
+__sfr __at 0x83 DPH;
+__sfr __at 0x84 DPL1;
+__sfr __at 0x85 DPH1;
+__sfr __at 0x86 DPS;
/* DPS */
- sbit at 0x86+0 SEL;
-sfr at 0x87 PCON; /* PCON */
- //sbit IDLE = 0x87+0;
- //sbit STOP = 0x87+1;
- //sbit GF0 = 0x87+2;
- //sbit GF1 = 0x87+3;
- //sbit SMOD0 = 0x87+7;
-sfr at 0x88 TCON;
+ __sbit __at 0x86+0 SEL;
+__sfr __at 0x87 PCON; /* PCON */
+ //__sbit IDLE = 0x87+0;
+ //__sbit STOP = 0x87+1;
+ //__sbit GF0 = 0x87+2;
+ //__sbit GF1 = 0x87+3;
+ //__sbit SMOD0 = 0x87+7;
+__sfr __at 0x88 TCON;
/* TCON */
- sbit at 0x88+0 IT0;
- sbit at 0x88+1 IE0;
- sbit at 0x88+2 IT1;
- sbit at 0x88+3 IE1;
- sbit at 0x88+4 TR0;
- sbit at 0x88+5 TF0;
- sbit at 0x88+6 TR1;
- sbit at 0x88+7 TF1;
-sfr at 0x89 TMOD;
+ __sbit __at 0x88+0 IT0;
+ __sbit __at 0x88+1 IE0;
+ __sbit __at 0x88+2 IT1;
+ __sbit __at 0x88+3 IE1;
+ __sbit __at 0x88+4 TR0;
+ __sbit __at 0x88+5 TF0;
+ __sbit __at 0x88+6 TR1;
+ __sbit __at 0x88+7 TF1;
+__sfr __at 0x89 TMOD;
/* TMOD */
- //sbit M00 = 0x89+0;
- //sbit M10 = 0x89+1;
- //sbit CT0 = 0x89+2;
- //sbit GATE0 = 0x89+3;
- //sbit M01 = 0x89+4;
- //sbit M11 = 0x89+5;
- //sbit CT1 = 0x89+6;
- //sbit GATE1 = 0x89+7;
-sfr at 0x8A TL0;
-sfr at 0x8B TL1;
-sfr at 0x8C TH0;
-sfr at 0x8D TH1;
-sfr at 0x8E CKCON;
+ //__sbit M00 = 0x89+0;
+ //__sbit M10 = 0x89+1;
+ //__sbit CT0 = 0x89+2;
+ //__sbit GATE0 = 0x89+3;
+ //__sbit M01 = 0x89+4;
+ //__sbit M11 = 0x89+5;
+ //__sbit CT1 = 0x89+6;
+ //__sbit GATE1 = 0x89+7;
+__sfr __at 0x8A TL0;
+__sfr __at 0x8B TL1;
+__sfr __at 0x8C TH0;
+__sfr __at 0x8D TH1;
+__sfr __at 0x8E CKCON;
/* CKCON */
- //sbit MD0 = 0x89+0;
- //sbit MD1 = 0x89+1;
- //sbit MD2 = 0x89+2;
- //sbit T0M = 0x89+3;
- //sbit T1M = 0x89+4;
- //sbit T2M = 0x89+5;
-// sfr at 0x8F SPC_FNC; // Was WRS in Reg320
+ //__sbit MD0 = 0x89+0;
+ //__sbit MD1 = 0x89+1;
+ //__sbit MD2 = 0x89+2;
+ //__sbit T0M = 0x89+3;
+ //__sbit T1M = 0x89+4;
+ //__sbit T2M = 0x89+5;
+// __sfr __at 0x8F SPC_FNC; // Was WRS in Reg320
/* CKCON */
- //sbit WRS = 0x8F+0;
-sfr at 0x90 IOB;
-sfr at 0x91 EXIF; // EXIF Bit Values differ from Reg320
+ //__sbit WRS = 0x8F+0;
+__sfr __at 0x90 IOB;
+__sfr __at 0x91 EXIF; // EXIF Bit Values differ from Reg320
/* EXIF */
- //sbit USBINT = 0x91+4;
- //sbit I2CINT = 0x91+5;
- //sbit IE4 = 0x91+6;
- //sbit IE5 = 0x91+7;
-sfr at 0x92 MPAGE;
-sfr at 0x98 SCON0;
+ //__sbit USBINT = 0x91+4;
+ //__sbit I2CINT = 0x91+5;
+ //__sbit IE4 = 0x91+6;
+ //__sbit IE5 = 0x91+7;
+__sfr __at 0x92 MPAGE;
+__sfr __at 0x98 SCON0;
/* SCON0 */
- sbit at 0x98+0 RI;
- sbit at 0x98+1 TI;
- sbit at 0x98+2 RB8;
- sbit at 0x98+3 TB8;
- sbit at 0x98+4 REN;
- sbit at 0x98+5 SM2;
- sbit at 0x98+6 SM1;
- sbit at 0x98+7 SM0;
-sfr at 0x99 SBUF0;
-
-sfr at 0x9A APTR1H;
-sfr at 0x9B APTR1L;
-sfr at 0x9C AUTODAT1;
-sfr at 0x9D AUTOPTRH2;
-sfr at 0x9E AUTOPTRL2;
-sfr at 0x9F AUTODAT2;
-sfr at 0xA0 IOC;
-sfr at 0xA1 INT2CLR;
-sfr at 0xA2 INT4CLR;
+ __sbit __at 0x98+0 RI;
+ __sbit __at 0x98+1 TI;
+ __sbit __at 0x98+2 RB8;
+ __sbit __at 0x98+3 TB8;
+ __sbit __at 0x98+4 REN;
+ __sbit __at 0x98+5 SM2;
+ __sbit __at 0x98+6 SM1;
+ __sbit __at 0x98+7 SM0;
+__sfr __at 0x99 SBUF0;
+
+__sfr __at 0x9A APTR1H;
+__sfr __at 0x9B APTR1L;
+__sfr __at 0x9C AUTODAT1;
+__sfr __at 0x9D AUTOPTRH2;
+__sfr __at 0x9E AUTOPTRL2;
+__sfr __at 0x9F AUTODAT2;
+__sfr __at 0xA0 IOC;
+__sfr __at 0xA1 INT2CLR;
+__sfr __at 0xA2 INT4CLR;
#define AUTOPTRH1 APTR1H
#define AUTOPTRL1 APTR1L
-sfr at 0xA8 IE;
+__sfr __at 0xA8 IE;
/* IE */
- sbit at 0xA8+0 EX0;
- sbit at 0xA8+1 ET0;
- sbit at 0xA8+2 EX1;
- sbit at 0xA8+3 ET1;
- sbit at 0xA8+4 ES0;
- sbit at 0xA8+5 ET2;
- sbit at 0xA8+6 ES1;
- sbit at 0xA8+7 EA;
-
-sfr at 0xAA EP2468STAT;
+ __sbit __at 0xA8+0 EX0;
+ __sbit __at 0xA8+1 ET0;
+ __sbit __at 0xA8+2 EX1;
+ __sbit __at 0xA8+3 ET1;
+ __sbit __at 0xA8+4 ES0;
+ __sbit __at 0xA8+5 ET2;
+ __sbit __at 0xA8+6 ES1;
+ __sbit __at 0xA8+7 EA;
+
+__sfr __at 0xAA EP2468STAT;
/* EP2468STAT */
- //sbit EP2E = 0xAA+0;
- //sbit EP2F = 0xAA+1;
- //sbit EP4E = 0xAA+2;
- //sbit EP4F = 0xAA+3;
- //sbit EP6E = 0xAA+4;
- //sbit EP6F = 0xAA+5;
- //sbit EP8E = 0xAA+6;
- //sbit EP8F = 0xAA+7;
-
-sfr at 0xAB EP24FIFOFLGS;
-sfr at 0xAC EP68FIFOFLGS;
-sfr at 0xAF AUTOPTRSETUP;
+ //__sbit EP2E = 0xAA+0;
+ //__sbit EP2F = 0xAA+1;
+ //__sbit EP4E = 0xAA+2;
+ //__sbit EP4F = 0xAA+3;
+ //__sbit EP6E = 0xAA+4;
+ //__sbit EP6F = 0xAA+5;
+ //__sbit EP8E = 0xAA+6;
+ //__sbit EP8F = 0xAA+7;
+
+__sfr __at 0xAB EP24FIFOFLGS;
+__sfr __at 0xAC EP68FIFOFLGS;
+__sfr __at 0xAF AUTOPTRSETUP;
/* AUTOPTRSETUP */
- // sbit EXTACC = 0xAF+0;
- // sbit APTR1FZ = 0xAF+1;
- // sbit APTR2FZ = 0xAF+2;
-
-sfr at 0xB0 IOD;
-sfr at 0xB1 IOE;
-sfr at 0xB2 OEA;
-sfr at 0xB3 OEB;
-sfr at 0xB4 OEC;
-sfr at 0xB5 OED;
-sfr at 0xB6 OEE;
-
-sfr at 0xB8 IP;
+ // __sbit EXTACC = 0xAF+0;
+ // __sbit APTR1FZ = 0xAF+1;
+ // __sbit APTR2FZ = 0xAF+2;
+
+__sfr __at 0xB0 IOD;
+__sfr __at 0xB1 IOE;
+__sfr __at 0xB2 OEA;
+__sfr __at 0xB3 OEB;
+__sfr __at 0xB4 OEC;
+__sfr __at 0xB5 OED;
+__sfr __at 0xB6 OEE;
+
+__sfr __at 0xB8 IP;
/* IP */
- sbit at 0xB8+0 PX0;
- sbit at 0xB8+1 PT0;
- sbit at 0xB8+2 PX1;
- sbit at 0xB8+3 PT1;
- sbit at 0xB8+4 PS0;
- sbit at 0xB8+5 PT2;
- sbit at 0xB8+6 PS1;
-
-sfr at 0xBA EP01STAT;
-sfr at 0xBB GPIFTRIG;
+ __sbit __at 0xB8+0 PX0;
+ __sbit __at 0xB8+1 PT0;
+ __sbit __at 0xB8+2 PX1;
+ __sbit __at 0xB8+3 PT1;
+ __sbit __at 0xB8+4 PS0;
+ __sbit __at 0xB8+5 PT2;
+ __sbit __at 0xB8+6 PS1;
+
+__sfr __at 0xBA EP01STAT;
+__sfr __at 0xBB GPIFTRIG;
-sfr at 0xBD GPIFSGLDATH;
-sfr at 0xBE GPIFSGLDATLX;
-sfr at 0xBF GPIFSGLDATLNOX;
+__sfr __at 0xBD GPIFSGLDATH;
+__sfr __at 0xBE GPIFSGLDATLX;
+__sfr __at 0xBF GPIFSGLDATLNOX;
-sfr at 0xC0 SCON1;
+__sfr __at 0xC0 SCON1;
/* SCON1 */
- sbit at 0xC0+0 RI1;
- sbit at 0xC0+1 TI1;
- sbit at 0xC0+2 RB81;
- sbit at 0xC0+3 TB81;
- sbit at 0xC0+4 REN1;
- sbit at 0xC0+5 SM21;
- sbit at 0xC0+6 SM11;
- sbit at 0xC0+7 SM01;
-sfr at 0xC1 SBUF1;
-sfr at 0xC8 T2CON;
+ __sbit __at 0xC0+0 RI1;
+ __sbit __at 0xC0+1 TI1;
+ __sbit __at 0xC0+2 RB81;
+ __sbit __at 0xC0+3 TB81;
+ __sbit __at 0xC0+4 REN1;
+ __sbit __at 0xC0+5 SM21;
+ __sbit __at 0xC0+6 SM11;
+ __sbit __at 0xC0+7 SM01;
+__sfr __at 0xC1 SBUF1;
+__sfr __at 0xC8 T2CON;
/* T2CON */
- sbit at 0xC8+0 CP_RL2;
- sbit at 0xC8+1 C_T2;
- sbit at 0xC8+2 TR2;
- sbit at 0xC8+3 EXEN2;
- sbit at 0xC8+4 TCLK;
- sbit at 0xC8+5 RCLK;
- sbit at 0xC8+6 EXF2;
- sbit at 0xC8+7 TF2;
-sfr at 0xCA RCAP2L;
-sfr at 0xCB RCAP2H;
-sfr at 0xCC TL2;
-sfr at 0xCD TH2;
-sfr at 0xD0 PSW;
+ __sbit __at 0xC8+0 CP_RL2;
+ __sbit __at 0xC8+1 C_T2;
+ __sbit __at 0xC8+2 TR2;
+ __sbit __at 0xC8+3 EXEN2;
+ __sbit __at 0xC8+4 TCLK;
+ __sbit __at 0xC8+5 RCLK;
+ __sbit __at 0xC8+6 EXF2;
+ __sbit __at 0xC8+7 TF2;
+__sfr __at 0xCA RCAP2L;
+__sfr __at 0xCB RCAP2H;
+__sfr __at 0xCC TL2;
+__sfr __at 0xCD TH2;
+__sfr __at 0xD0 PSW;
/* PSW */
- sbit at 0xD0+0 P;
- sbit at 0xD0+1 FL;
- sbit at 0xD0+2 OV;
- sbit at 0xD0+3 RS0;
- sbit at 0xD0+4 RS1;
- sbit at 0xD0+5 F0;
- sbit at 0xD0+6 AC;
- sbit at 0xD0+7 CY;
-sfr at 0xD8 EICON; // Was WDCON in DS80C320 EICON; Bit Values differ from Reg320
+ __sbit __at 0xD0+0 P;
+ __sbit __at 0xD0+1 FL;
+ __sbit __at 0xD0+2 OV;
+ __sbit __at 0xD0+3 RS0;
+ __sbit __at 0xD0+4 RS1;
+ __sbit __at 0xD0+5 F0;
+ __sbit __at 0xD0+6 AC;
+ __sbit __at 0xD0+7 CY;
+__sfr __at 0xD8 EICON; // Was WDCON in DS80C320 EICON; Bit Values differ from Reg320
/* EICON */
- sbit at 0xD8+3 INT6;
- sbit at 0xD8+4 RESI;
- sbit at 0xD8+5 ERESI;
- sbit at 0xD8+7 SMOD1;
-sfr at 0xE0 ACC;
-sfr at 0xE8 EIE; // EIE Bit Values differ from Reg320
+ __sbit __at 0xD8+3 INT6;
+ __sbit __at 0xD8+4 RESI;
+ __sbit __at 0xD8+5 ERESI;
+ __sbit __at 0xD8+7 SMOD1;
+__sfr __at 0xE0 ACC;
+__sfr __at 0xE8 EIE; // EIE Bit Values differ from Reg320
/* EIE */
- sbit at 0xE8+0 EIUSB;
- sbit at 0xE8+1 EI2C;
- sbit at 0xE8+2 EIEX4;
- sbit at 0xE8+3 EIEX5;
- sbit at 0xE8+4 EIEX6;
-sfr at 0xF0 B;
-sfr at 0xF8 EIP; // EIP Bit Values differ from Reg320
+ __sbit __at 0xE8+0 EIUSB;
+ __sbit __at 0xE8+1 EI2C;
+ __sbit __at 0xE8+2 EIEX4;
+ __sbit __at 0xE8+3 EIEX5;
+ __sbit __at 0xE8+4 EIEX6;
+__sfr __at 0xF0 B;
+__sfr __at 0xF8 EIP; // EIP Bit Values differ from Reg320
/* EIP */
- sbit at 0xF8+0 PUSB;
- sbit at 0xF8+1 PI2C;
- sbit at 0xF8+2 EIPX4;
- sbit at 0xF8+3 EIPX5;
- sbit at 0xF8+4 EIPX6;
+ __sbit __at 0xF8+0 PUSB;
+ __sbit __at 0xF8+1 PI2C;
+ __sbit __at 0xF8+2 EIPX4;
+ __sbit __at 0xF8+3 EIPX5;
+ __sbit __at 0xF8+4 EIPX6;
/*-----------------------------------------------------------------------------
Bit Masks
diff --git a/firmware/fx2/common/i2c.c b/firmware/fx2/common/i2c.c
index 0f238b5..dd31a5f 100644
--- a/firmware/fx2/common/i2c.c
+++ b/firmware/fx2/common/i2c.c
@@ -30,7 +30,7 @@
// returns non-zero if successful, else 0
unsigned char
-i2c_read (unsigned char addr, xdata unsigned char *buf, unsigned char len)
+i2c_read (unsigned char addr, __xdata unsigned char *buf, unsigned char len)
{
volatile unsigned char junk;
@@ -89,7 +89,7 @@ i2c_read (unsigned char addr, xdata unsigned char *buf, unsigned char len)
// returns non-zero if successful, else 0
unsigned char
-i2c_write (unsigned char addr, xdata const unsigned char *buf, unsigned char len)
+i2c_write (unsigned char addr, __xdata const unsigned char *buf, unsigned char len)
{
while (I2CS & bmSTOP) // wait for stop to clear
;
diff --git a/firmware/fx2/common/i2c.h b/firmware/fx2/common/i2c.h
index 273526d..25f5364 100644
--- a/firmware/fx2/common/i2c.h
+++ b/firmware/fx2/common/i2c.h
@@ -24,9 +24,9 @@
#define _I2C_H_
// returns non-zero if successful, else 0
-unsigned char i2c_read (unsigned char addr, xdata unsigned char *buf, unsigned char len);
+unsigned char i2c_read (unsigned char addr, __xdata unsigned char *buf, unsigned char len);
// returns non-zero if successful, else 0
-unsigned char i2c_write (unsigned char addr, xdata const unsigned char *buf, unsigned char len);
+unsigned char i2c_write (unsigned char addr, __xdata const unsigned char *buf, unsigned char len);
#endif /* _I2C_H_ */
diff --git a/firmware/fx2/common/init_gpif.c b/firmware/fx2/common/init_gpif.c
index edde919..f0866ed 100644
--- a/firmware/fx2/common/init_gpif.c
+++ b/firmware/fx2/common/init_gpif.c
@@ -29,7 +29,7 @@ extern const char InitData[7];
// The tool is kind of screwed up, in that it doesn't configure some
// of the ports correctly. We just use their tables and handle the
// initialization ourselves. They also declare that their static
-// initialized data is in xdata, which screws us too.
+// initialized data is in __xdata, which screws us too.
void
init_gpif (void)
diff --git a/firmware/fx2/common/isr.c b/firmware/fx2/common/isr.c
index 05412da..61f2dc3 100644
--- a/firmware/fx2/common/isr.c
+++ b/firmware/fx2/common/isr.c
@@ -24,9 +24,9 @@
#include "fx2regs.h"
#include "syncdelay.h"
-extern xdata unsigned char _standard_interrupt_vector[];
-extern xdata unsigned char _usb_autovector[];
-extern xdata unsigned char _fifo_gpif_autovector[];
+extern __xdata unsigned char _standard_interrupt_vector[];
+extern __xdata unsigned char _usb_autovector[];
+extern __xdata unsigned char _fifo_gpif_autovector[];
#define LJMP_OPCODE 0x02
@@ -39,7 +39,7 @@ extern xdata unsigned char _fifo_gpif_autovector[];
void
hook_sv (unsigned char vector_number, unsigned short addr)
{
- bit t;
+ __bit t;
// sanity checks
@@ -66,7 +66,7 @@ hook_sv (unsigned char vector_number, unsigned short addr)
void
hook_uv (unsigned char vector_number, unsigned short addr)
{
- bit t;
+ __bit t;
// sanity checks
@@ -93,7 +93,7 @@ hook_uv (unsigned char vector_number, unsigned short addr)
void
hook_fgv (unsigned char vector_number, unsigned short addr)
{
- bit t;
+ __bit t;
// sanity checks
diff --git a/firmware/fx2/common/spi.c b/firmware/fx2/common/spi.c
index 04a1d84..6f62c91 100644
--- a/firmware/fx2/common/spi.c
+++ b/firmware/fx2/common/spi.c
@@ -98,17 +98,17 @@ static void
write_byte_msb (unsigned char v);
static void
-write_bytes_msb (const xdata unsigned char *buf, unsigned char len);
+write_bytes_msb (const __xdata unsigned char *buf, unsigned char len);
static void
-read_bytes_msb (xdata unsigned char *buf, unsigned char len);
+read_bytes_msb (__xdata unsigned char *buf, unsigned char len);
// returns non-zero if successful, else 0
unsigned char
spi_read (unsigned char header_hi, unsigned char header_lo,
unsigned char enables, unsigned char format,
- xdata unsigned char *buf, unsigned char len)
+ __xdata unsigned char *buf, unsigned char len)
{
if (count_bits8 (enables) > 1)
return 0; // error, too many enables set
@@ -165,7 +165,7 @@ spi_read (unsigned char header_hi, unsigned char header_lo,
unsigned char
spi_write (unsigned char header_hi, unsigned char header_lo,
unsigned char enables, unsigned char format,
- const xdata unsigned char *buf, unsigned char len)
+ const __xdata unsigned char *buf, unsigned char len)
{
setup_enables (enables);
@@ -261,7 +261,7 @@ write_byte_msb (unsigned char v)
}
static void
-write_bytes_msb (const xdata unsigned char *buf, unsigned char len)
+write_bytes_msb (const __xdata unsigned char *buf, unsigned char len)
{
while (len-- != 0){
write_byte_msb (*buf++);
@@ -320,9 +320,9 @@ read_byte_msb (void)
}
#else
static unsigned char
-read_byte_msb (void) _naked
+read_byte_msb (void) __naked
{
- _asm
+ __asm
clr a
setb _bitS_CLK
@@ -367,12 +367,12 @@ read_byte_msb (void) _naked
mov dpl,a
ret
- _endasm;
+ __endasm;
}
#endif
static void
-read_bytes_msb (xdata unsigned char *buf, unsigned char len)
+read_bytes_msb (__xdata unsigned char *buf, unsigned char len)
{
while (len-- != 0){
*buf++ = read_byte_msb ();
diff --git a/firmware/fx2/common/spi.h b/firmware/fx2/common/spi.h
index 12bc5e5..0ee6882 100644
--- a/firmware/fx2/common/spi.h
+++ b/firmware/fx2/common/spi.h
@@ -31,13 +31,13 @@ void init_spi (void); // one time call to init
unsigned char
spi_read (unsigned char header_hi, unsigned char header_lo,
unsigned char enables, unsigned char format,
- xdata unsigned char *buf, unsigned char len);
+ __xdata unsigned char *buf, unsigned char len);
// returns non-zero if successful, else 0
unsigned char
spi_write (unsigned char header_hi, unsigned char header_lo,
unsigned char enables, unsigned char format,
- const xdata unsigned char *buf, unsigned char len);
+ const __xdata unsigned char *buf, unsigned char len);
#endif /* INCLUDED_SPI_H */
diff --git a/firmware/fx2/common/syncdelay.h b/firmware/fx2/common/syncdelay.h
index 0af7d09..cca96ad 100644
--- a/firmware/fx2/common/syncdelay.h
+++ b/firmware/fx2/common/syncdelay.h
@@ -23,7 +23,7 @@
#define _SYNCDELAY_H_
/*
- * Magic delay required between access to certain xdata registers (TRM page 15-106).
+ * Magic delay required between access to certain __xdata registers (TRM page 15-106).
* For our configuration, 48 MHz FX2 / 48 MHz IFCLK, we need three cycles. Each
* NOP is a single cycle....
*
@@ -58,8 +58,8 @@
/*
* FIXME ensure that the peep hole optimizer isn't screwing us
*/
-#define SYNCDELAY _asm nop; nop; nop; _endasm
-#define NOP _asm nop; _endasm
+#define SYNCDELAY __asm nop; nop; nop; __endasm
+#define NOP __asm nop; __endasm
#endif /* _SYNCDELAY_H_ */
diff --git a/firmware/fx2/common/usb_common.c b/firmware/fx2/common/usb_common.c
index 3b0547b..6a7a103 100644
--- a/firmware/fx2/common/usb_common.c
+++ b/firmware/fx2/common/usb_common.c
@@ -28,12 +28,12 @@
#include "usb_descriptors.h"
#include "usb_requests.h"
-extern xdata char str0[];
-extern xdata char str1[];
-extern xdata char str2[];
-extern xdata char str3[];
-extern xdata char str4[];
-extern xdata char str5[];
+extern __xdata char str0[];
+extern __xdata char str1[];
+extern __xdata char str2[];
+extern __xdata char str3[];
+extern __xdata char str4[];
+extern __xdata char str5[];
#define bRequestType SETUPDAT[0]
@@ -48,15 +48,15 @@ extern xdata char str5[];
#define MSB(x) (((unsigned short) x) >> 8)
#define LSB(x) (((unsigned short) x) & 0xff)
-volatile bit _usb_got_SUDAV;
+volatile __bit _usb_got_SUDAV;
unsigned char _usb_config = 0;
unsigned char _usb_alt_setting = 0; // FIXME really 1/interface
-xdata unsigned char *current_device_descr;
-xdata unsigned char *current_devqual_descr;
-xdata unsigned char *current_config_descr;
-xdata unsigned char *other_config_descr;
+__xdata unsigned char *current_device_descr;
+__xdata unsigned char *current_devqual_descr;
+__xdata unsigned char *current_config_descr;
+__xdata unsigned char *other_config_descr;
static void
setup_descriptors (void)
@@ -81,21 +81,21 @@ setup_descriptors (void)
}
static void
-isr_SUDAV (void) interrupt
+isr_SUDAV (void) __interrupt
{
clear_usb_irq ();
_usb_got_SUDAV = 1;
}
static void
-isr_USBRESET (void) interrupt
+isr_USBRESET (void) __interrupt
{
clear_usb_irq ();
setup_descriptors ();
}
static void
-isr_HIGHSPEED (void) interrupt
+isr_HIGHSPEED (void) __interrupt
{
clear_usb_irq ();
setup_descriptors ();
@@ -133,7 +133,7 @@ plausible_endpoint (unsigned char ep)
// return pointer to control and status register for endpoint.
// only called with plausible_endpoints
-xdata volatile unsigned char *
+__xdata volatile unsigned char *
epcs (unsigned char ep)
{
if (ep == 0x01) // ep1 has different in and out CS regs
@@ -234,7 +234,7 @@ usb_handle_setup_packet (void)
if (wValueL >= nstring_descriptors)
fx2_stall_ep0 ();
else {
- xdata char *p = string_descriptors[wValueL];
+ __xdata char *p = string_descriptors[wValueL];
SUDPTRH = MSB (p);
SUDPTRL = LSB (p);
}
diff --git a/firmware/fx2/common/usb_common.h b/firmware/fx2/common/usb_common.h
index ae07b23..2fbab6d 100644
--- a/firmware/fx2/common/usb_common.h
+++ b/firmware/fx2/common/usb_common.h
@@ -23,7 +23,7 @@
#ifndef _USB_COMMON_H_
#define _USB_COMMON_H_
-extern volatile bit _usb_got_SUDAV;
+extern volatile __bit _usb_got_SUDAV;
// Provided by user application to handle VENDOR commands.
// returns non-zero if it handled the command.
diff --git a/firmware/fx2/common/usb_descriptors.h b/firmware/fx2/common/usb_descriptors.h
index 0b8c621..ea91169 100644
--- a/firmware/fx2/common/usb_descriptors.h
+++ b/firmware/fx2/common/usb_descriptors.h
@@ -20,21 +20,21 @@
* Boston, MA 02110-1301, USA.
*/
-extern xdata const char high_speed_device_descr[];
-extern xdata const char high_speed_devqual_descr[];
-extern xdata const char high_speed_config_descr[];
+extern __xdata const char high_speed_device_descr[];
+extern __xdata const char high_speed_devqual_descr[];
+extern __xdata const char high_speed_config_descr[];
-extern xdata const char full_speed_device_descr[];
-extern xdata const char full_speed_devqual_descr[];
-extern xdata const char full_speed_config_descr[];
+extern __xdata const char full_speed_device_descr[];
+extern __xdata const char full_speed_devqual_descr[];
+extern __xdata const char full_speed_config_descr[];
-extern xdata unsigned char nstring_descriptors;
-extern xdata char * xdata string_descriptors[];
+extern __xdata unsigned char nstring_descriptors;
+extern __xdata char * __xdata string_descriptors[];
/*
* We patch these locations with info read from the usrp config eeprom
*/
-extern xdata char usb_desc_hw_rev_binary_patch_location_0[];
-extern xdata char usb_desc_hw_rev_binary_patch_location_1[];
-extern xdata char usb_desc_hw_rev_ascii_patch_location_0[];
-extern xdata char usb_desc_serial_number_ascii[];
+extern __xdata char usb_desc_hw_rev_binary_patch_location_0[];
+extern __xdata char usb_desc_hw_rev_binary_patch_location_1[];
+extern __xdata char usb_desc_hw_rev_ascii_patch_location_0[];
+extern __xdata char usb_desc_serial_number_ascii[];
diff --git a/firmware/fx2/config/CMakeASM_SDCCInformation.cmake b/firmware/fx2/config/CMakeASM_SDCCInformation.cmake
index d9f28b8..0d26b89 100644
--- a/firmware/fx2/config/CMakeASM_SDCCInformation.cmake
+++ b/firmware/fx2/config/CMakeASM_SDCCInformation.cmake
@@ -15,7 +15,7 @@
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
-# support for the SDCC assembler, asx8051
+# support for the SDCC assembler, sdas8051
SET( ASM_DIALECT "_SDCC" )
SET( CMAKE_ASM${ASM_DIALECT}_SOURCE_FILE_EXTENSIONS a51 )
diff --git a/firmware/fx2/config/CMakeDetermineASM_SDCCCompiler.cmake b/firmware/fx2/config/CMakeDetermineASM_SDCCCompiler.cmake
index ab301b9..3748107 100644
--- a/firmware/fx2/config/CMakeDetermineASM_SDCCCompiler.cmake
+++ b/firmware/fx2/config/CMakeDetermineASM_SDCCCompiler.cmake
@@ -16,7 +16,7 @@
SET(ASM_DIALECT "_SDCC")
-SET(CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT asx8051)
+SET(CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT sdas8051)
INCLUDE(CMakeDetermineASMCompiler)
SET(ASM_DIALECT)
diff --git a/firmware/fx2/usrp1/board_specific.c b/firmware/fx2/usrp1/board_specific.c
index ef0081d..92fc28f 100644
--- a/firmware/fx2/usrp1/board_specific.c
+++ b/firmware/fx2/usrp1/board_specific.c
@@ -64,7 +64,7 @@ set_sleep_bits (unsigned char bits, unsigned char mask)
// NOP on usrp1
}
-static xdata unsigned char xbuf[1];
+static __xdata unsigned char xbuf[1];
void
write_9862 (unsigned char which, unsigned char regno, unsigned char value)
diff --git a/firmware/fx2/usrp1/eeprom_io.c b/firmware/fx2/usrp1/eeprom_io.c
index 9eeb536..666f3f6 100644
--- a/firmware/fx2/usrp1/eeprom_io.c
+++ b/firmware/fx2/usrp1/eeprom_io.c
@@ -27,12 +27,12 @@
// returns non-zero if successful, else 0
unsigned char
eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
- xdata unsigned char *buf, unsigned char len)
+ __xdata unsigned char *buf, unsigned char len)
{
// We setup a random read by first doing a "zero byte write".
// Writes carry an address. Reads use an implicit address.
- static xdata unsigned char cmd[1];
+ static __xdata unsigned char cmd[1];
cmd[0] = eeprom_offset;
if (!i2c_write(i2c_addr, cmd, 1))
return 0;
@@ -46,9 +46,9 @@ eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
// returns non-zero if successful, else 0
unsigned char
eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
- const xdata unsigned char *buf, unsigned char len)
+ const __xdata unsigned char *buf, unsigned char len)
{
- static xdata unsigned char cmd[2];
+ static __xdata unsigned char cmd[2];
unsigned char ok;
while (len-- > 0){
diff --git a/firmware/fx2/usrp1/eeprom_io.h b/firmware/fx2/usrp1/eeprom_io.h
index 558017b..d1c4ee6 100644
--- a/firmware/fx2/usrp1/eeprom_io.h
+++ b/firmware/fx2/usrp1/eeprom_io.h
@@ -27,12 +27,12 @@
// returns non-zero if successful, else 0
unsigned char
eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
- xdata unsigned char *buf, unsigned char len);
+ __xdata unsigned char *buf, unsigned char len);
// returns non-zero if successful, else 0
unsigned char
eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
- const xdata unsigned char *buf, unsigned char len);
+ const __xdata unsigned char *buf, unsigned char len);
#endif /* INCLUDED_EEPROM_IO_H */
diff --git a/firmware/fx2/usrp1/fpga_load.c b/firmware/fx2/usrp1/fpga_load.c
index c3ae9e7..4c0a85e 100644
--- a/firmware/fx2/usrp1/fpga_load.c
+++ b/firmware/fx2/usrp1/fpga_load.c
@@ -89,9 +89,9 @@ clock_out_config_byte (unsigned char bits)
#else
static void
-clock_out_config_byte (unsigned char bits) _naked
+clock_out_config_byte (unsigned char bits) __naked
{
- _asm
+ __asm
mov a, dpl
rrc a
@@ -136,14 +136,14 @@ clock_out_config_byte (unsigned char bits) _naked
ret
- _endasm;
+ __endasm;
}
#endif
static void
clock_out_bytes (unsigned char bytecount,
- unsigned char xdata *p)
+ unsigned char __xdata *p)
{
while (bytecount-- > 0)
clock_out_config_byte (*p++);
@@ -163,7 +163,7 @@ clock_out_bytes (unsigned char bytecount,
* ALTERA_NSTATUS = 1 (input)
*/
unsigned char
-fpga_load_xfer (xdata unsigned char *p, unsigned char bytecount)
+fpga_load_xfer (__xdata unsigned char *p, unsigned char bytecount)
{
clock_out_bytes (bytecount, p);
return 1;
diff --git a/firmware/fx2/usrp1/fpga_rev2.c b/firmware/fx2/usrp1/fpga_rev2.c
index cca961d..a1081f5 100644
--- a/firmware/fx2/usrp1/fpga_rev2.c
+++ b/firmware/fx2/usrp1/fpga_rev2.c
@@ -30,7 +30,7 @@ unsigned char g_tx_reset = 0;
unsigned char g_rx_reset = 0;
void
-fpga_write_reg (unsigned char regno, const xdata unsigned char *regval)
+fpga_write_reg (unsigned char regno, const __xdata unsigned char *regval)
{
spi_write (0, 0x00 | (regno & 0x7f),
SPI_ENABLE_FPGA,
@@ -39,7 +39,7 @@ fpga_write_reg (unsigned char regno, const xdata unsigned char *regval)
}
-static xdata unsigned char regval[4] = {0, 0, 0, 0};
+static __xdata unsigned char regval[4] = {0, 0, 0, 0};
static void
write_fpga_master_ctrl (void)
diff --git a/firmware/fx2/usrp1/gpif.c b/firmware/fx2/usrp1/gpif.c
index f6745a4..2ba8a8a 100644
--- a/firmware/fx2/usrp1/gpif.c
+++ b/firmware/fx2/usrp1/gpif.c
@@ -156,7 +156,7 @@
// END DO NOT EDIT
// DO NOT EDIT ...
-const char xdata WaveData[128] =
+const char __xdata WaveData[128] =
{
// Wave 0
/* LenBr */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x07,
@@ -182,7 +182,7 @@ const char xdata WaveData[128] =
// END DO NOT EDIT
// DO NOT EDIT ...
-const char xdata FlowStates[36] =
+const char __xdata FlowStates[36] =
{
/* Wave 0 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/* Wave 1 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
@@ -192,7 +192,7 @@ const char xdata FlowStates[36] =
// END DO NOT EDIT
// DO NOT EDIT ...
-const char xdata InitData[7] =
+const char __xdata InitData[7] =
{
/* Regs */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00
};
diff --git a/firmware/fx2/usrp1/usrp_main.c b/firmware/fx2/usrp1/usrp_main.c
index 802516c..841451f 100644
--- a/firmware/fx2/usrp1/usrp_main.c
+++ b/firmware/fx2/usrp1/usrp_main.c
@@ -63,7 +63,7 @@ unsigned char g_tx_underrun = 0;
* into hash1.
*/
#define USRP_HASH_SIZE 16
-xdata at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE];
+__xdata __at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE];
static void
get_ep0_data (void)
@@ -305,7 +305,7 @@ main_loop (void)
* Toggle led 0
*/
void
-isr_tick (void) interrupt
+isr_tick (void) __interrupt
{
static unsigned char count = 1;
@@ -324,8 +324,8 @@ isr_tick (void) interrupt
void
patch_usb_descriptors(void)
{
- static xdata unsigned char hw_rev;
- static xdata unsigned char serial_no[8];
+ static __xdata unsigned char hw_rev;
+ static __xdata unsigned char serial_no[8];
unsigned char i;
eeprom_read(I2C_ADDR_BOOT, HW_REV_OFFSET, &hw_rev, 1); // LSB of device id
diff --git a/firmware/fx2/usrp1/usrp_regs.h b/firmware/fx2/usrp1/usrp_regs.h
index a4f1d98..4390f13 100644
--- a/firmware/fx2/usrp1/usrp_regs.h
+++ b/firmware/fx2/usrp1/usrp_regs.h
@@ -47,9 +47,9 @@
#define bmPA_TX_UNDERRUN bmBIT7 // misc pin to FPGA (underflow)
-sbit at 0x80+0 bitS_CLK; // 0x80 is the bit address of PORT A
-sbit at 0x80+1 bitS_OUT; // out from FX2 point of view
-sbit at 0x80+2 bitS_IN; // in from FX2 point of view
+__sbit __at 0x80+0 bitS_CLK; // 0x80 is the bit address of PORT A
+__sbit __at 0x80+1 bitS_OUT; // out from FX2 point of view
+__sbit __at 0x80+2 bitS_IN; // in from FX2 point of view
/* all outputs except S_DATA_FROM_PERIPH, FX2_2, FX2_3 */
@@ -85,8 +85,8 @@ sbit at 0x80+2 bitS_IN; // in from FX2 point of view
#define bmPC_LED0 bmBIT6 // active low
#define bmPC_LED1 bmBIT7 // active low
-sbit at 0xA0+1 bitALTERA_DATA0; // 0xA0 is the bit address of PORT C
-sbit at 0xA0+3 bitALTERA_DCLK;
+__sbit __at 0xA0+1 bitALTERA_DATA0; // 0xA0 is the bit address of PORT C
+__sbit __at 0xA0+3 bitALTERA_DCLK;
#define bmALTERA_BITS (bmALTERA_DATA0 \
diff --git a/firmware/fx2/utils/edit-gpif-b100.py b/firmware/fx2/utils/edit-gpif-b100.py
index fd949cd..d90993e 100755
--- a/firmware/fx2/utils/edit-gpif-b100.py
+++ b/firmware/fx2/utils/edit-gpif-b100.py
@@ -105,7 +105,7 @@ def edit_gpif (input_name, output_name, inline_name):
check_flow_state (line, flow_state_dict)
line = re.sub (r'#include', r'// #include', line)
- line = re.sub (r'xdata ', r'', line)
+ line = re.sub (r'__xdata ', r'', line)
if re.search (r'GpifInit', line):
break
diff --git a/firmware/fx2/utils/edit-gpif.py b/firmware/fx2/utils/edit-gpif.py
index 5367b75..93f1878 100755
--- a/firmware/fx2/utils/edit-gpif.py
+++ b/firmware/fx2/utils/edit-gpif.py
@@ -99,7 +99,7 @@ def edit_gpif (input_name, output_name, inline_name):
check_flow_state (line, flow_state_dict)
line = re.sub (r'#include', r'// #include', line)
- line = re.sub (r'xdata ', r'', line)
+ line = re.sub (r'__xdata ', r'', line)
if re.search (r'GpifInit', line):
break