570 lines
20 KiB
RPMSpec
570 lines
20 KiB
RPMSpec
%global candidate rc4
|
|
|
|
Name: uboot-tools
|
|
Version: 2020.01
|
|
Release: 0.6%{?candidate:.%{candidate}}.0.riscv64%{?dist}
|
|
Summary: U-Boot utilities
|
|
License: GPLv2+ BSD LGPL-2.1+ LGPL-2.0+
|
|
URL: http://www.denx.de/wiki/U-Boot
|
|
|
|
Source0: ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}%{?candidate:-%{candidate}}.tar.bz2
|
|
Source1: arm-boards
|
|
Source2: arm-chromebooks
|
|
Source3: aarch64-boards
|
|
Source4: aarch64-chromebooks
|
|
Source5: 10-devicetree.install
|
|
Source6: riscv64-boards
|
|
|
|
# Fedoraisms patches
|
|
# Needed to find DT on boot partition that's not the first partition
|
|
Patch1: uefi-distro-load-FDT-from-any-partition-on-boot-device.patch
|
|
# Needed due to issues with shim
|
|
Patch2: uefi-use-Fedora-specific-path-name.patch
|
|
|
|
# Board fixes and enablement
|
|
Patch4: usb-kbd-fixes.patch
|
|
Patch5: rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch
|
|
Patch6: dragonboard-fixes.patch
|
|
Patch7: ARM-tegra-Add-NVIDIA-Jetson-Nano.patch
|
|
Patch8: arm-tegra-defaine-fdtfile-for-all-devices.patch
|
|
Patch9: tools-fix-version.h.patch
|
|
Patch10: zynqmp-Add-support-for-u-boot.itb-generation-with-ATF.patch
|
|
Patch11: zynqmp-Do-not-assing-MIO34-that-early-on-zcu100.patch
|
|
Patch12: bcm283x-dts-Rename-U-Boot-file.patch
|
|
|
|
# PXE depends on fdt_addr (mandatory)
|
|
# fdt_addr is an address to DTB in HW (e.g. ROM)
|
|
# While off-chip NVM QSPI Flash is mapped to the memory our DTB comes from
|
|
# FSBL or OpenSBI (most likely).
|
|
# Both (FSBL and OpenSBI) incl. the latest DTB directly from the kernel build.
|
|
# Thus we have to set fdt_addr to the save value as fdt_addr_r which matches
|
|
# the location where OpenSBI will place embedded DTB.
|
|
Patch20: riscv64-set-fdt_addr.patch
|
|
|
|
# Set bootargs (console and earlycon)
|
|
# Fix fdt by use cp.l on QEMU (fixed in 5.4, corruption of DTB happens in
|
|
# kernel)
|
|
# https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v5.4-rc2&id=922b0375fc93fb1a20c5617e37c389c26bbccb70
|
|
# https://patchwork.kernel.org/patch/11165207/
|
|
Patch21: riscv-bootargs-preboot.patch
|
|
|
|
# Not upstream
|
|
# Adds support for Image.gz to booti (RFC/RFT)
|
|
# See: https://patchwork.ozlabs.org/patch/1174807/
|
|
Patch23: image-add-image.gz-parsing-support-in-booti.patch
|
|
|
|
# Not upstream
|
|
# See: https://lore.kernel.org/linux-riscv/mvm5zkrhe8q.fsf@suse.de/T/#t
|
|
# Increase stack from 8KiB to 16KiB to avoid issues bringing up harts online
|
|
Patch24: riscv-increase-stack-size-to-16KiB.patch
|
|
|
|
# Not upstream
|
|
# Add 'addappend' label to PXE/EXTLINUX configuration
|
|
Patch25: uboot-addappend.patch
|
|
|
|
# Not upstream
|
|
# Define kernel_comp_addr_r and filesize for booti Image.gz support
|
|
Patch26: uboot-riscv-def-kernel_comp_addr_r.patch
|
|
|
|
# Not upstream (but posted)
|
|
# See: https://patchwork.ozlabs.org/patch/1196837/
|
|
Patch27: dm-serial-handle-stdout-path-with-options-correctly.patch
|
|
|
|
BuildRequires: bc
|
|
BuildRequires: dtc
|
|
BuildRequires: make
|
|
# Requirements for building on el7
|
|
%if 0%{?rhel} == 7
|
|
BuildRequires: devtoolset-7-build
|
|
BuildRequires: devtoolset-7-binutils
|
|
BuildRequires: devtoolset-7-gcc
|
|
BuildRequires: python2-devel
|
|
BuildRequires: python3-setuptools
|
|
BuildRequires: python2-libfdt
|
|
%else
|
|
BuildRequires: gcc
|
|
BuildRequires: python3-devel
|
|
BuildRequires: python3-setuptools
|
|
BuildRequires: python3-libfdt
|
|
%endif
|
|
BuildRequires: flex bison
|
|
BuildRequires: openssl-devel
|
|
BuildRequires: SDL-devel
|
|
BuildRequires: swig
|
|
%ifarch %{arm} aarch64
|
|
BuildRequires: vboot-utils
|
|
%endif
|
|
%ifarch aarch64
|
|
BuildRequires: arm-trusted-firmware-armv8
|
|
%endif
|
|
|
|
Requires: dtc
|
|
Requires: systemd
|
|
%ifarch aarch64 %{arm}
|
|
Obsoletes: uboot-images-elf < 2019.07
|
|
Provides: uboot-images-elf < 2019.07
|
|
%endif
|
|
|
|
%description
|
|
This package contains a few U-Boot utilities - mkimage for creating boot images
|
|
and fw_printenv/fw_setenv for manipulating the boot environment variables.
|
|
|
|
%ifarch aarch64
|
|
%package -n uboot-images-armv8
|
|
Summary: u-boot bootloader images for aarch64 boards
|
|
Requires: uboot-tools
|
|
BuildArch: noarch
|
|
|
|
%description -n uboot-images-armv8
|
|
u-boot bootloader binaries for aarch64 boards
|
|
%endif
|
|
|
|
%ifarch %{arm}
|
|
%package -n uboot-images-armv7
|
|
Summary: u-boot bootloader images for armv7 boards
|
|
Requires: uboot-tools
|
|
BuildArch: noarch
|
|
|
|
%description -n uboot-images-armv7
|
|
u-boot bootloader binaries for armv7 boards
|
|
%endif
|
|
|
|
%ifarch riscv64
|
|
%package -n uboot-images-riscv64
|
|
Summary: u-boot bootloader images for riscv64 boards
|
|
Requires: uboot-tools
|
|
BuildArch: noarch
|
|
|
|
%description -n uboot-images-riscv64
|
|
u-boot bootloader binaries for riscv64 boards
|
|
%endif
|
|
|
|
%prep
|
|
%autosetup -p1 -n u-boot-%{version}%{?candidate:-%{candidate}}
|
|
|
|
cp %SOURCE1 %SOURCE2 %SOURCE3 %SOURCE4 %SOURCE6 .
|
|
|
|
sed -i 's/python/python3/' arch/arm/mach-rockchip/make_fit_atf.py
|
|
|
|
%build
|
|
mkdir builds
|
|
|
|
%if 0%{?rhel} == 7
|
|
#Enabling DTS for .el7
|
|
%{?enable_devtoolset7:%{enable_devtoolset7}}
|
|
%endif
|
|
|
|
%ifarch aarch64 %{arm} riscv64
|
|
for board in $(cat %{_arch}-boards)
|
|
do
|
|
echo "Building board: $board"
|
|
mkdir builds/$(echo $board)/
|
|
# ATF selection, needs improving, suggestions of ATF SoC to Board matrix welcome
|
|
sun50i=(a64-olinuxino amarula_a64_relic bananapi_m2_plus_h5 bananapi_m64 libretech_all_h3_cc_h5 nanopi_a64 nanopi_neo2 nanopi_neo_plus2 orangepi_pc2 orangepi_prime orangepi_win orangepi_zero_plus orangepi_zero_plus2 pine64-lts pine64_plus pinebook sopine_baseboard teres_i)
|
|
if [[ " ${sun50i[*]} " == *" $board "* ]]; then
|
|
echo "Board: $board using sun50i_a64"
|
|
cp /usr/share/arm-trusted-firmware/sun50i_a64/* builds/$(echo $board)/
|
|
fi
|
|
sun50h6=(orangepi_lite2 orangepi_one_plus pine_h64)
|
|
if [[ " ${sun50h6[*]} " == *" $board "* ]]; then
|
|
echo "Board: $board using sun50i_h6"
|
|
cp /usr/share/arm-trusted-firmware/sun50i_h6/* builds/$(echo $board)/
|
|
fi
|
|
rk3328=(evb-rk3328 rock64-rk3328)
|
|
if [[ " ${rk3328[*]} " == *" $board "* ]]; then
|
|
echo "Board: $board using rk3328"
|
|
cp /usr/share/arm-trusted-firmware/rk3328/* builds/$(echo $board)/
|
|
fi
|
|
rk3399=(evb-rk3399 ficus-rk3399 firefly-rk3399 nanopc-t4-rk3399 nanopi-m4-rk3399 nanopi-neo4-rk3399 orangepi-rk3399 puma-rk3399 rock960-rk3399 rock-pi-4-rk3399 rockpro64-rk3399 roc-pc-rk3399)
|
|
if [[ " ${rk3399[*]} " == *" $board "* ]]; then
|
|
echo "Board: $board using rk3399"
|
|
cp /usr/share/arm-trusted-firmware/rk3399/* builds/$(echo $board)/
|
|
fi
|
|
# End ATF
|
|
make $(echo $board)_defconfig O=builds/$(echo $board)/
|
|
make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 O=builds/$(echo $board)/
|
|
if [[ " ${rk3328[*]} " == *" $board "* ]]; then
|
|
builds/$(echo $board)/tools/mkimage -n rk3328 -T rksd -d builds/$(echo $board)/spl/u-boot-spl.bin builds/$(echo $board)/spl_sd.img
|
|
builds/$(echo $board)/tools/mkimage -n rk3328 -T rkspi -d builds/$(echo $board)/spl/u-boot-spl.bin builds/$(echo $board)/spl_spi.img
|
|
fi
|
|
if [[ " ${rk3399[*]} " == *" $board "* ]]; then
|
|
builds/$(echo $board)/tools/mkimage -n rk3399 -T rksd -d builds/$(echo $board)/spl/u-boot-spl.bin builds/$(echo $board)/spl_sd.img
|
|
builds/$(echo $board)/tools/mkimage -n rk3399 -T rkspi -d builds/$(echo $board)/spl/u-boot-spl.bin builds/$(echo $board)/spl_spi.img
|
|
fi
|
|
done
|
|
|
|
%endif
|
|
|
|
make HOSTCC="gcc $RPM_OPT_FLAGS" %{?_smp_mflags} CROSS_COMPILE="" tools-only_defconfig V=1 O=builds/
|
|
make HOSTCC="gcc $RPM_OPT_FLAGS" %{?_smp_mflags} CROSS_COMPILE="" tools-all V=1 O=builds/
|
|
|
|
%install
|
|
mkdir -p $RPM_BUILD_ROOT%{_bindir}
|
|
mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}
|
|
mkdir -p $RPM_BUILD_ROOT%{_mandir}/man1
|
|
mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/
|
|
|
|
%ifarch aarch64
|
|
for board in $(cat %{_arch}-boards)
|
|
do
|
|
mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
|
|
for file in u-boot.bin u-boot.dtb u-boot.img u-boot-dtb.img u-boot.itb u-boot-sunxi-with-spl.bin spl_sd.img spl_spi.img idbloader.img spl/boot.bin spl/arndale-spl.bin spl/sunxi-spl.bin
|
|
do
|
|
if [ -f builds/$(echo $board)/$(echo $file) ]; then
|
|
install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
|
|
fi
|
|
done
|
|
done
|
|
%endif
|
|
|
|
%ifarch %{arm}
|
|
for board in $(cat %{_arch}-boards)
|
|
do
|
|
mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
|
|
for file in MLO SPL spl/arndale-spl.bin spl/origen-spl.bin spl/*spl.bin u-boot.bin u-boot.dtb u-boot-dtb-tegra.bin u-boot.img u-boot.imx u-boot-spl.kwb u-boot-sunxi-with-spl.bin spl/boot.bin
|
|
do
|
|
if [ -f builds/$(echo $board)/$(echo $file) ]; then
|
|
install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
|
|
fi
|
|
done
|
|
|
|
done
|
|
|
|
# Bit of a hack to remove binaries we don't use as they're large
|
|
for board in $(cat %{_arch}-boards)
|
|
do
|
|
if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot-sunxi-with-spl.bin ]; then
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.*
|
|
fi
|
|
if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/MLO ]; then
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.bin
|
|
fi
|
|
if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/SPL ]; then
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.bin
|
|
fi
|
|
if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.imx ]; then
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.bin
|
|
fi
|
|
done
|
|
%endif
|
|
|
|
%ifarch riscv64
|
|
for board in $(cat %{_arch}-boards)
|
|
do
|
|
mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
|
|
for file in u-boot.bin u-boot-nodtb.bin
|
|
do
|
|
if [ -f builds/$(echo $board)/$(echo $file) ]; then
|
|
install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
|
|
fi
|
|
done
|
|
done
|
|
%endif
|
|
|
|
for tool in bmp_logo dumpimage env/fw_printenv fit_check_sign fit_info gdb/gdbcont gdb/gdbsend gen_eth_addr gen_ethaddr_crc img2srec mkenvimage mkimage mksunxiboot ncb proftool sunxi-spl-image-builder ubsha1 xway-swap-bytes
|
|
do
|
|
install -p -m 0755 builds/tools/$tool $RPM_BUILD_ROOT%{_bindir}
|
|
done
|
|
install -p -m 0644 doc/mkimage.1 $RPM_BUILD_ROOT%{_mandir}/man1
|
|
|
|
install -p -m 0755 builds/tools/env/fw_printenv $RPM_BUILD_ROOT%{_bindir}
|
|
( cd $RPM_BUILD_ROOT%{_bindir}; ln -sf fw_printenv fw_setenv )
|
|
|
|
install -p -m 0644 tools/env/fw_env.config $RPM_BUILD_ROOT%{_sysconfdir}
|
|
|
|
# systemd kernel-install script for device tree
|
|
mkdir -p $RPM_BUILD_ROOT/lib/kernel/install.d/
|
|
install -p -m 0755 %{SOURCE5} $RPM_BUILD_ROOT/lib/kernel/install.d/
|
|
|
|
# Copy sone useful docs over
|
|
mkdir -p builds/docs
|
|
cp -p board/amlogic/p200/README.odroid-c2 builds/docs/README.odroid-c2
|
|
cp -p board/hisilicon/hikey/README builds/docs/README.hikey
|
|
cp -p board/hisilicon/hikey/README builds/docs/README.hikey
|
|
cp -p board/Marvell/db-88f6820-gp/README builds/docs/README.mvebu-db-88f6820
|
|
cp -p board/rockchip/evb_rk3399/README builds/docs/README.evb_rk3399
|
|
cp -p board/solidrun/clearfog/README builds/docs/README.clearfog
|
|
cp -p board/solidrun/mx6cuboxi/README builds/docs/README.mx6cuboxi
|
|
cp -p board/sunxi/README.sunxi64 builds/docs/README.sunxi64
|
|
cp -p board/sunxi/README.nand builds/docs/README.sunxi-nand
|
|
cp -p board/ti/am335x/README builds/docs/README.am335x
|
|
cp -p board/ti/omap5_uevm/README builds/docs/README.omap5_uevm
|
|
cp -p board/udoo/README builds/docs/README.udoo
|
|
cp -p board/wandboard/README builds/docs/README.wandboard
|
|
cp -p board/warp/README builds/docs/README.warp
|
|
cp -p board/warp7/README builds/docs/README.warp7
|
|
|
|
%files
|
|
%doc README doc/imx doc/README.kwbimage doc/README.distro doc/README.gpt
|
|
%doc doc/README.odroid doc/README.rockchip doc/uefi doc/uImage.FIT doc/arch/arm64.rst
|
|
%doc doc/README.chromium builds/docs/*
|
|
%{_bindir}/*
|
|
%{_mandir}/man1/mkimage.1*
|
|
/lib/kernel/install.d/10-devicetree.install
|
|
%dir %{_datadir}/uboot/
|
|
%config(noreplace) %{_sysconfdir}/fw_env.config
|
|
|
|
%ifarch aarch64
|
|
%files -n uboot-images-armv8
|
|
%{_datadir}/uboot/*
|
|
%endif
|
|
|
|
%ifarch %{arm}
|
|
%files -n uboot-images-armv7
|
|
%{_datadir}/uboot/*
|
|
%endif
|
|
|
|
%ifarch riscv64
|
|
%files -n uboot-images-riscv64
|
|
%{_datadir}/uboot/*
|
|
%endif
|
|
|
|
%changelog
|
|
* Thu Dec 5 2019 David Abdurachmanov <david.abdurachmanov@sifive.com> 2020.01-0.6-rc4.0.riscv64
|
|
- Add support for RISC-V (riscv64)
|
|
- Define filesize and kernel_comp_addr_r for QEMU virt and SiFive FU540 boards
|
|
to support Image.gz with booti
|
|
- Add 'addappend' label to PXE/EXTLINUX configuration
|
|
|
|
* Tue Dec 3 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.6-rc4
|
|
- Fixes for AllWinner, Raspberry Pi, Rockchip, Xilinx ZynqMP
|
|
|
|
* Tue Dec 3 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.5-rc4
|
|
- 2020.01 RC4
|
|
|
|
* Tue Nov 19 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.4-rc3
|
|
- 2020.01 RC3
|
|
|
|
* Tue Nov 12 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.3-rc2
|
|
- 2020.01 RC2
|
|
|
|
* Tue Nov 5 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.2-rc1
|
|
- Include new ATF 2.2
|
|
|
|
* Wed Oct 30 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-0.1-rc1
|
|
- 2020.01 RC1
|
|
- Initial migration to python3
|
|
|
|
* Wed Oct 9 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.10-2
|
|
- Fixes for Rockchips rk3328 and rk3399 platforms
|
|
|
|
* Mon Oct 7 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.10-1
|
|
- 2019.10
|
|
|
|
* Mon Sep 23 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.10-0.5-rc4
|
|
- 2019.10 RC4
|
|
|
|
* Wed Sep 11 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.10-0.4-rc3
|
|
- Minor fixes
|
|
|
|
* Tue Aug 27 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.10-0.3-rc3
|
|
- 2019.10 RC3
|
|
|
|
* Mon Aug 26 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.10-0.2-rc2
|
|
- Temporarily disable Chrome devices due to unexpected retirement of vboot-utils
|
|
|
|
* Wed Aug 14 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.10-0.1-rc2
|
|
- 2019.10 RC2
|
|
|
|
* Sun Aug 4 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.07-3
|
|
- Fixes for Rock960
|
|
- Iniital Raspberry Pi 4 support
|
|
|
|
* Sat Jul 27 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2019.07-2
|
|
- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
|
|
|
|
* Mon Jul 8 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.07-1
|
|
- 2019.07
|
|
- Enable Rock64
|
|
- Rock960 enhancements
|
|
|
|
* Fri Jun 28 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.07-0.2-rc4
|
|
- Fix build with explicit python2
|
|
- Drop a couple of unused boards
|
|
|
|
* Tue Jun 18 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.07-0.1-rc4
|
|
- 2019.07 RC4
|
|
- Obsolete unused elf packages
|
|
- A number of new rk3399 devices
|
|
|
|
* Sat May 4 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-2
|
|
- Build and ship pre built SD/SPI SPL bits for all rk3399 boards
|
|
|
|
* Sun Apr 14 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-1
|
|
- 2019.04
|
|
- Fixes for AllWinner and NVIDIA Jetson devices
|
|
|
|
* Thu Apr 4 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.9-rc4
|
|
- Latest Tegra patch revision
|
|
|
|
* Sun Mar 31 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.8-rc4
|
|
- Add ability to make creation of boot/dtb symlink configurable
|
|
|
|
* Sun Mar 24 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.7-rc4
|
|
- Minor UEFI fixes, Tegra Jetson TX series rebase
|
|
|
|
* Wed Mar 20 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.6-rc4
|
|
- Tegra Jetson TX-series improvements
|
|
|
|
* Tue Mar 19 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.5-rc4
|
|
- 2019.04 RC4
|
|
|
|
* Tue Mar 5 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.4-rc3
|
|
- 2019.04 RC3
|
|
|
|
* Tue Feb 19 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.3-rc2
|
|
- 2019.04 RC2
|
|
|
|
* Sat Feb 9 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.2-rc1
|
|
- Build against new ATF snapshot
|
|
|
|
* Fri Feb 8 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.04-0.1-rc1
|
|
- 2019.04 RC1
|
|
|
|
* Sun Feb 03 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2019.01-2
|
|
- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
|
|
|
|
* Tue Jan 15 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.01-1
|
|
- 2019.01
|
|
|
|
* Tue Jan 8 2019 Peter Robinson <pbrobinson@fedoraproject.org> 2019.01-0.4-rc3
|
|
- 2019.01 RC3
|
|
|
|
* Tue Dec 18 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2019.01-0.3-rc2
|
|
- 2019.01 RC2
|
|
|
|
* Wed Dec 12 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2019.01-0.2-rc1
|
|
- ATF tweaks and fixes
|
|
- Enable amarula_a64_relic, nanopi_a64, puma-rk3399
|
|
|
|
* Tue Dec 4 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2019.01-0.1-rc1
|
|
- 2019.01 RC1
|
|
- Enable new devices
|
|
|
|
* Tue Dec 4 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.11-1
|
|
- 2018.11
|
|
- Build with ATF 2.0
|
|
- Fix Hummingboard and CuBox-i devices
|
|
|
|
* Tue Oct 30 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.11-0.1.rc3
|
|
- 2018.11 RC3
|
|
|
|
* Sun Sep 30 2018 Pablo Greco <pablo@fliagreco.com.ar>
|
|
- Added conditional to enable devtoolset-7-gcc for .el7 build (Arrfab)
|
|
- Added conditional BR, python2-pyelftools is python-pyelftools in .el7 (Arrfab)
|
|
|
|
* Sun Sep 23 2018 Peter Robinson <pbrobinson@fedoraproject.org>
|
|
- Update Rock960 patches, enable Rock960 Enterprise Edition (ficus)
|
|
|
|
* Mon Sep 10 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.09-1
|
|
- 2018.09
|
|
|
|
* Tue Sep 4 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.09-0.4.rc3
|
|
- 2018.09 RC3
|
|
- Enable nanopi_neo_plus2, pine_h64, rock960-rk3399, a64-olinuxino
|
|
- Build against new upstream AllWinner ATF support
|
|
- Use firmware provided DT on Raspberry Pi
|
|
- Support for Pine64-LTS
|
|
|
|
* Tue Aug 14 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.09-0.2.rc2
|
|
- 2018.09 RC2
|
|
- Improve Jetson TX1 support
|
|
- Enable OrangePi 1+ and Avnet Ultra96
|
|
|
|
* Tue Jul 31 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.09-0.1.rc1
|
|
- 2018.09 RC1
|
|
|
|
* Sat Jul 14 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2018.07-2
|
|
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
|
|
|
|
* Mon Jul 9 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.07-1
|
|
- 2018.07
|
|
|
|
* Tue Jul 3 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.07-0.4.rc3
|
|
- 2018.07 RC3
|
|
|
|
* Wed Jun 20 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.07-0.3.rc2
|
|
- 2018.07 RC2
|
|
- Enable Helios4
|
|
|
|
* Fri Jun 8 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.07-0.2.rc1
|
|
- Update sunxi MMC patch series, Tegra Nyan patch, SolidRun i.MX6 SoM rev 1.5 patch
|
|
|
|
* Tue Jun 5 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.07-0.1.rc1
|
|
- 2018.07 RC1
|
|
- Enable Turris Mox, BananaPi m2 Berry, some Libretech boards
|
|
|
|
* Mon May 7 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.05-1
|
|
- 2018.05 GA
|
|
|
|
* Wed May 2 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.05-0.5.rc3
|
|
- Build Xilnix ZynqMP zcu100 (96boards Ultra96)
|
|
|
|
* Tue May 1 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.05-0.4.rc3
|
|
- 2018.05 RC3
|
|
|
|
* Thu Apr 26 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.05-0.3.rc2
|
|
- uEFI improvements
|
|
- Fixes for Rockchips rk33xx 64 bit devices
|
|
- Build AllWinner 64 bit devices against new ATF
|
|
|
|
* Tue Apr 17 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.05-0.2.rc2
|
|
- 2018.05 RC2
|
|
- Enable Raspberry Pi option to use firmware DT
|
|
|
|
* Sun Apr 8 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.05-0.1.rc1
|
|
- 2018.05 RC1
|
|
|
|
* Fri Apr 6 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-4
|
|
- Improvements for Raspberry Pi, AllWinner MMC perf, mvebu devices
|
|
|
|
* Tue Mar 20 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-3
|
|
- Fix issue with certain MMC cards on Raspberry Pi
|
|
|
|
* Fri Mar 16 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-2
|
|
- Add support for Raspberry Pi 3+
|
|
|
|
* Tue Mar 13 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-1
|
|
- 2018.03 GA
|
|
|
|
* Fri Mar 9 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.11.rc4
|
|
- Enable support for Jetson TX2
|
|
|
|
* Thu Mar 8 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.10.rc4
|
|
- Fix for Raspberry Pi 2 boot
|
|
|
|
* Wed Mar 7 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.9.rc4
|
|
- 2018.03 RC4
|
|
- Fixes for Raspberry Pi 3 boot
|
|
- Minor kernel install fixes
|
|
- Enable am335x_evm_usbspl for Beagle Pocket
|
|
- DragonBoard patch rebase
|
|
|
|
* Sun Mar 4 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.8.rc3
|
|
- Add support for SoM rev 1.5 to mx6cuboxi
|
|
- Rebuild for new ATF 1.5 rc0 release
|
|
|
|
* Sun Feb 25 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.7.rc3
|
|
- Build 64 bit Rockchips FIT images with ARM Trusted Firmware
|
|
|
|
* Tue Feb 20 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.6.rc3
|
|
- 2018.03 RC3
|
|
|
|
* Fri Feb 16 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.5.rc2
|
|
- A few upstream fixes
|
|
|
|
* Thu Feb 15 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.4.rc2
|
|
- Fix for GBps network on some AllWinner devices
|
|
|
|
* Tue Feb 13 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.3.rc2
|
|
- 2018.03 RC2
|
|
|
|
* Wed Feb 7 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.2.rc1
|
|
- Update uEFI patches
|
|
|
|
* Tue Jan 30 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.03-0.1.rc1
|
|
- 2018.03 RC1
|
|
|
|
* Tue Jan 9 2018 Peter Robinson <pbrobinson@fedoraproject.org> 2018.01-1
|
|
- 2018.01
|