rpms/uboot-tools
3
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
82aabc8bb2
uboot-tools/0001-arm-dts-allwinner-sync-from-linux-for-RGMII-RX-TX-de.patch
Peter Robinson 82aabc8bb2 Allwinner network fixes
2021-02-10 11:05:10 +00:00

2669 lines
61 KiB
Diff
Raw Blame History

From d6aa8909c2099371333c83546d26d46a3b71ba48 Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Wed, 10 Feb 2021 11:01:01 +0000
Subject: [PATCH] arm: dts: allwinner: sync from linux for RGMII RX/TX delay
fixes
Sync over a subset of the AllWinner dts changes from Linux 5.11
for the RGMII RX/TX delay network fixes.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
arch/arm/dts/sun50i-a64-bananapi-m64.dts | 10 +-
arch/arm/dts/sun50i-a64-orangepi-win.dts | 10 +-
arch/arm/dts/sun50i-a64-pine64-plus.dts | 2 +-
arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 10 +-
arch/arm/dts/sun50i-a64.dtsi | 34 ++-
.../dts/sun50i-h5-bananapi-m2-plus-v1.2.dts | 1 +
.../arm/dts/sun50i-h5-libretech-all-h5-cc.dts | 2 +-
arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts | 2 +-
arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 23 +-
arch/arm/dts/sun50i-h5-orangepi-prime.dts | 2 +-
.../arm/dts/sun50i-h5-orangepi-zero-plus2.dts | 38 +++
arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts | 14 +-
arch/arm/dts/sun7i-a20-bananapi.dts | 24 +-
arch/arm/dts/sun7i-a20-bananapro.dts | 14 +-
arch/arm/dts/sun7i-a20-cubieboard2.dts | 24 +-
arch/arm/dts/sun7i-a20-cubietruck.dts | 14 +-
arch/arm/dts/sun7i-a20-hummingbird.dts | 21 +-
arch/arm/dts/sun7i-a20-i12-tvbox.dts | 12 +-
arch/arm/dts/sun7i-a20-icnova-swac.dts | 15 +-
arch/arm/dts/sun7i-a20-itead-ibox.dts | 4 +-
arch/arm/dts/sun7i-a20-lamobo-r1.dts | 14 +-
arch/arm/dts/sun7i-a20-m3.dts | 12 +-
arch/arm/dts/sun7i-a20-olimex-som-evb.dts | 12 +-
arch/arm/dts/sun7i-a20-olimex-som204-evb.dts | 24 +-
arch/arm/dts/sun7i-a20-olinuxino-lime.dts | 30 +--
arch/arm/dts/sun7i-a20-olinuxino-lime2.dts | 44 ++--
arch/arm/dts/sun7i-a20-olinuxino-micro.dts | 30 +--
arch/arm/dts/sun7i-a20-orangepi-mini.dts | 24 +-
arch/arm/dts/sun7i-a20-orangepi.dts | 24 +-
arch/arm/dts/sun7i-a20-pcduino3-nano.dts | 28 +--
arch/arm/dts/sun7i-a20-pcduino3.dts | 24 +-
arch/arm/dts/sun7i-a20-wexler-tab7200.dts | 12 +-
arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts | 24 +-
arch/arm/dts/sun7i-a20.dtsi | 218 +++++++++++++++++-
arch/arm/dts/sun8i-a83t-bananapi-m3.dts | 53 ++++-
arch/arm/dts/sun8i-a83t-cubietruck-plus.dts | 71 +++++-
arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts | 5 -
arch/arm/dts/sun8i-h3-orangepi-plus2e.dts | 2 +-
arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts | 38 +++
arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts | 12 +-
arch/arm/dts/sun9i-a80-cubieboard4.dts | 61 +++--
arch/arm/dts/sun9i-a80-optimus.dts | 50 +++-
arch/arm/dts/sunxi-bananapi-m2-plus.dtsi | 2 +-
43 files changed, 752 insertions(+), 338 deletions(-)
diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
index 883f217efb..e5e840b9fb 100644
--- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
@@ -105,7 +105,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dc1sw>;
status = "okay";
@@ -331,10 +331,10 @@
"Microphone", "Microphone Jack",
"Microphone", "Onboard Microphone";
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
"Headphone Jack", "HP",
"MIC2", "Microphone Jack",
"Onboard Microphone", "MBIAS",
diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts
index fde9c7a99b..70e31743f0 100644
--- a/arch/arm/dts/sun50i-a64-orangepi-win.dts
+++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts
@@ -120,7 +120,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_gmac_3v3>;
status = "okay";
@@ -330,10 +330,10 @@
"Microphone", "Microphone Jack",
"Microphone", "Onboard Microphone";
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
"Headphone Jack", "HP",
"MIC2", "Microphone Jack",
"Onboard Microphone", "MBIAS",
diff --git a/arch/arm/dts/sun50i-a64-pine64-plus.dts b/arch/arm/dts/sun50i-a64-pine64-plus.dts
index b26181cf90..b54099b654 100644
--- a/arch/arm/dts/sun50i-a64-pine64-plus.dts
+++ b/arch/arm/dts/sun50i-a64-pine64-plus.dts
@@ -13,7 +13,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-txid";
phy-handle = <&ext_rgmii_phy>;
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
index 2f6ea9f3f6..d4069749d7 100644
--- a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
@@ -79,7 +79,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dc1sw>;
status = "okay";
@@ -159,11 +159,11 @@
simple-audio-card,widgets = "Microphone", "Microphone Jack",
"Headphone", "Headphone Jack";
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
"Headphone Jack", "HP",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
"MIC2", "Microphone Jack";
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
index 8dfbcd1440..51cc30e84e 100644
--- a/arch/arm/dts/sun50i-a64.dtsi
+++ b/arch/arm/dts/sun50i-a64.dtsi
@@ -51,7 +51,7 @@
reg = <0>;
enable-method = "psci";
next-level-cache = <&L2>;
- clocks = <&ccu 21>;
+ clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
#cooling-cells = <2>;
};
@@ -62,7 +62,7 @@
reg = <1>;
enable-method = "psci";
next-level-cache = <&L2>;
- clocks = <&ccu 21>;
+ clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
#cooling-cells = <2>;
};
@@ -73,7 +73,7 @@
reg = <2>;
enable-method = "psci";
next-level-cache = <&L2>;
- clocks = <&ccu 21>;
+ clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
#cooling-cells = <2>;
};
@@ -84,7 +84,7 @@
reg = <3>;
enable-method = "psci";
next-level-cache = <&L2>;
- clocks = <&ccu 21>;
+ clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
#cooling-cells = <2>;
};
@@ -139,10 +139,10 @@
simple-audio-card,mclk-fs = <128>;
simple-audio-card,aux-devs = <&codec_analog>;
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC";
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC";
status = "disabled";
cpudai: simple-audio-card,cpu {
@@ -157,6 +157,7 @@
timer {
compatible = "arm,armv8-timer";
allwinner,erratum-unknown1;
+ arm,no-tick-in-suspend;
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14
@@ -845,6 +846,20 @@
status = "disabled";
};
+ i2s2: i2s@1c22800 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun50i-a64-i2s",
+ "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22800 0x400>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+ clock-names = "apb", "mod";
+ resets = <&ccu RST_BUS_I2S2>;
+ dma-names = "rx", "tx";
+ dmas = <&dma 27>, <&dma 27>;
+ status = "disabled";
+ };
+
dai: dai@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun50i-a64-codec-i2s";
@@ -860,7 +875,8 @@
codec: codec@1c22e00 {
#sound-dai-cells = <0>;
- compatible = "allwinner,sun8i-a33-codec";
+ compatible = "allwinner,sun50i-a64-codec",
+ "allwinner,sun8i-a33-codec";
reg = <0x01c22e00 0x600>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
diff --git a/arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts b/arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts
index 2e2b14c0ae..8857a37915 100644
--- a/arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts
+++ b/arch/arm/dts/sun50i-h5-bananapi-m2-plus-v1.2.dts
@@ -3,6 +3,7 @@
/dts-v1/;
#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
#include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi>
/ {
diff --git a/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
index df1b9263ad..6e30a564c8 100644
--- a/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
+++ b/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
@@ -36,7 +36,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
/delete-property/ allwinner,leds-active-low;
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
index 4f9ba53ffa..9d93fe1536 100644
--- a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
+++ b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
@@ -96,7 +96,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
index 70b5f09984..8bf2db9dcb 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
@@ -61,6 +61,7 @@
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ wakeup-source;
};
};
@@ -93,6 +94,10 @@
status = "okay";
};
+&cpu0 {
+ cpu-supply = <&reg_vdd_cpux>;
+};
+
&de {
status = "okay";
};
@@ -118,7 +123,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
@@ -168,6 +173,22 @@
status = "okay";
};
+&r_i2c {
+ status = "okay";
+
+ reg_vdd_cpux: regulator@65 {
+ compatible = "silergy,sy8106a";
+ reg = <0x65>;
+ regulator-name = "vdd-cpux";
+ silergy,fixed-microvolt = <1100000>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <200>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
&spi0 {
status = "okay";
diff --git a/arch/arm/dts/sun50i-h5-orangepi-prime.dts b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
index cb44bfa598..33ab44072e 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
@@ -124,7 +124,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts
index c95a685413..de19e68eb8 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts
@@ -30,6 +30,21 @@
};
};
+ leds {
+ compatible = "gpio-leds";
+
+ pwr {
+ label = "orangepi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ status {
+ label = "orangepi:red:status";
+ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
@@ -48,6 +63,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&hdmi {
status = "okay";
};
@@ -92,6 +111,10 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pa_pins>;
@@ -103,3 +126,18 @@
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};
+
+&usb_otg {
+ /*
+ * According to schematics CN1 MicroUSB port can be used to take
+ * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+ * port cannot provide power externally even if the board is powered
+ * via GPIO pins. It thus makes sense to force peripheral mode.
+ */
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
index e2bfe00588..8945dbb114 100644
--- a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -129,14 +129,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
- phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&hdmi {
@@ -171,6 +167,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts
index 81bc85d398..0b3d9ae756 100644
--- a/arch/arm/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/dts/sun7i-a20-bananapi.dts
@@ -131,14 +131,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
- phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&hdmi {
@@ -171,6 +167,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -246,12 +248,6 @@
"SPI-MISO", "SPI-CE1", "",
"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
"", "", "", "", "", "", "", "";
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
};
#include "axp209.dtsi"
@@ -329,9 +325,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-bananapro.dts b/arch/arm/dts/sun7i-a20-bananapro.dts
index 0176e9de01..5740f94427 100644
--- a/arch/arm/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/dts/sun7i-a20-bananapro.dts
@@ -109,14 +109,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
- phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -143,6 +139,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-cubieboard2.dts b/arch/arm/dts/sun7i-a20-cubieboard2.dts
index 200685b0b1..b8203e4ef2 100644
--- a/arch/arm/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/dts/sun7i-a20-cubieboard2.dts
@@ -115,13 +115,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&hdmi {
@@ -161,6 +157,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&ohci0 {
status = "okay";
};
@@ -173,14 +175,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_ahci_5v {
status = "okay";
};
@@ -236,9 +230,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
index 99f531b8d2..9109ca0919 100644
--- a/arch/arm/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
@@ -150,13 +150,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
- phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&hdmi {
@@ -194,6 +190,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts
index fd0153f656..3def2a3305 100644
--- a/arch/arm/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/dts/sun7i-a20-hummingbird.dts
@@ -100,19 +100,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_vdd>;
- /* phy reset config */
- snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
- snps,reset-active-low;
- /* wait 1s after reset, otherwise fail to read phy id */
- snps,reset-delays-us = <0 10000 1000000>;
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -146,6 +137,16 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+ reset-assert-us = <10000>;
+ /* wait 1s after reset, otherwise fail to read phy id */
+ reset-deassert-us = <1000000>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v0>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
index 5f1c4f573d..358ed5f1b1 100644
--- a/arch/arm/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
@@ -115,14 +115,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -145,6 +141,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-icnova-swac.dts b/arch/arm/dts/sun7i-a20-icnova-swac.dts
index 949494730a..413505f45a 100644
--- a/arch/arm/dts/sun7i-a20-icnova-swac.dts
+++ b/arch/arm/dts/sun7i-a20-icnova-swac.dts
@@ -49,7 +49,8 @@
/ {
model = "ICnova-A20 SWAC";
- compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
+ compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20",
+ "allwinner,sun7i-a20";
aliases {
serial0 = &uart0;
@@ -75,13 +76,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -98,6 +95,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-itead-ibox.dts b/arch/arm/dts/sun7i-a20-itead-ibox.dts
index b90a7607d0..946c272783 100644
--- a/arch/arm/dts/sun7i-a20-itead-ibox.dts
+++ b/arch/arm/dts/sun7i-a20-itead-ibox.dts
@@ -97,10 +97,12 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
+};
+&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
index f91e1bee44..17fa8901fc 100644
--- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
@@ -123,8 +123,6 @@
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
- /delete-property/#address-cells;
- /delete-property/#size-cells;
fixed-link {
speed = <1000>;
@@ -229,14 +227,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
#include "axp209.dtsi"
&ac_power_supply {
@@ -322,9 +312,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-m3.dts b/arch/arm/dts/sun7i-a20-m3.dts
index b8a1aaaf39..6bff9e731f 100644
--- a/arch/arm/dts/sun7i-a20-m3.dts
+++ b/arch/arm/dts/sun7i-a20-m3.dts
@@ -82,13 +82,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -111,6 +107,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
index f0e6a96e57..6f9c54b8e4 100644
--- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
@@ -111,13 +111,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&hdmi {
@@ -202,6 +198,12 @@
};
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
index 823aabce04..230d62a6b8 100644
--- a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
@@ -105,18 +105,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy3>;
+ phy-handle = <&phy3>;
phy-mode = "rgmii";
phy-supply = <&reg_vcc3v3>;
-
- snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
status = "okay";
-
- phy3: ethernet-phy@3 {
- reg = <3>;
- };
};
&hdmi {
@@ -161,6 +153,16 @@
status = "okay";
};
+&gmac_mdio {
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+ reset-assert-us = <10000>;
+ /* wait 1s after reset, otherwise fail to read phy id */
+ reset-deassert-us = <1000000>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -314,8 +316,8 @@
};
&usbphy {
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
index 5e411194bf..2adbac8601 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
@@ -106,13 +106,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&hdmi {
@@ -149,6 +145,12 @@
};
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -174,18 +176,6 @@
function = "gpio_out";
drive-strength = <20>;
};
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
};
&reg_ahci_5v {
@@ -217,10 +207,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
index 4e1c590eb0..9ba62774e8 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
@@ -111,13 +111,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&hdmi {
@@ -154,6 +150,12 @@
vref-supply = <&reg_vcc3v0>;
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -174,23 +176,17 @@
};
&pio {
+ vcc-pa-supply = <&reg_vcc3v3>;
+ vcc-pc-supply = <&reg_vcc3v3>;
+ vcc-pe-supply = <&reg_ldo3>;
+ vcc-pf-supply = <&reg_vcc3v3>;
+ vcc-pg-supply = <&reg_ldo4>;
+
led_pins_olinuxinolime: led-pins {
pins = "PH2";
function = "gpio_out";
drive-strength = <20>;
};
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
};
&reg_ahci_5v {
@@ -200,6 +196,14 @@
#include "axp209.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -267,10 +271,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
index 840ae1194a..359bd0d5b3 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
@@ -118,13 +118,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&hdmi {
@@ -215,6 +211,12 @@
};
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -252,18 +254,6 @@
function = "gpio_out";
drive-strength = <20>;
};
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
};
#include "axp209.dtsi"
@@ -355,10 +345,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
index 15881081ca..2e328d2cef 100644
--- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
@@ -120,14 +120,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&hdmi {
@@ -158,6 +154,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -176,14 +178,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -239,9 +233,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts
index d64de2e73a..d75b2e2bab 100644
--- a/arch/arm/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/dts/sun7i-a20-orangepi.dts
@@ -96,14 +96,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -124,6 +120,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -135,14 +137,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -198,9 +192,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
index 538ea15fa3..bf38c66c18 100644
--- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2015 Adam Sampson <ats@offog.org>
+ * Copyright 2015-2020 Adam Sampson <ats@offog.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -114,13 +114,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
- phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&hdmi {
@@ -149,6 +145,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -168,14 +170,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_ahci_5v {
gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
status = "okay";
@@ -226,9 +220,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts
index a72ed4318d..cc8271d777 100644
--- a/arch/arm/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
@@ -122,13 +122,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -149,6 +145,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -168,14 +170,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_ahci_5v {
gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
status = "okay";
@@ -226,9 +220,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
index ffade253d1..6a66b0432d 100644
--- a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
@@ -156,14 +156,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
@@ -223,9 +215,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
index c27e56091f..3bfae98f3c 100644
--- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -81,13 +81,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -110,6 +106,12 @@
#include "axp209.dtsi"
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -145,14 +147,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -206,9 +200,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi
index 641a8fa6d4..6d6a37940d 100644
--- a/arch/arm/dts/sun7i-a20.dtsi
+++ b/arch/arm/dts/sun7i-a20.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/clock/sun7i-a20-ccu.h>
#include <dt-bindings/reset/sun4i-a10-ccu.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
@@ -180,7 +181,7 @@
default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
- alloc-ranges = <0x4a000000 0x6000000>;
+ alloc-ranges = <0x40000000 0x10000000>;
reusable;
linux,cma-default;
};
@@ -333,7 +334,7 @@
#dma-cells = <2>;
};
- nfc: nand@1c03000 {
+ nfc: nand-controller@1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -376,6 +377,16 @@
num-cs = <1>;
};
+ csi0: csi@1c09000 {
+ compatible = "allwinner,sun7i-a20-csi0";
+ reg = <0x01c09000 0x1000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+ clock-names = "bus", "isp", "ram";
+ resets = <&ccu RST_CSI0>;
+ status = "disabled";
+ };
+
emac: ethernet@1c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
@@ -394,11 +405,12 @@
};
tcon0: lcd-controller@1c0c000 {
- compatible = "allwinner,sun7i-a20-tcon";
+ compatible = "allwinner,sun7i-a20-tcon0",
+ "allwinner,sun7i-a20-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&ccu RST_TCON0>;
- reset-names = "lcd";
+ resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
+ reset-names = "lcd", "lvds";
clocks = <&ccu CLK_AHB_LCD0>,
<&ccu CLK_TCON0_CH0>,
<&ccu CLK_TCON0_CH1>;
@@ -406,6 +418,7 @@
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon0-pixel-clock";
+ #clock-cells = <0>;
dmas = <&dma SUN4I_DMA_DEDICATED 14>;
ports {
@@ -443,7 +456,8 @@
};
tcon1: lcd-controller@1c0d000 {
- compatible = "allwinner,sun7i-a20-tcon";
+ compatible = "allwinner,sun7i-a20-tcon1",
+ "allwinner,sun7i-a20-tcon";
reg = <0x01c0d000 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
resets = <&ccu RST_TCON1>;
@@ -455,6 +469,7 @@
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon1-pixel-clock";
+ #clock-cells = <0>;
dmas = <&dma SUN4I_DMA_DEDICATED 15>;
ports {
@@ -586,13 +601,14 @@
phy-names = "usb";
extcon = <&usbphy 0>;
allwinner,sram = <&otg_sram 1>;
+ dr_mode = "otg";
status = "disabled";
};
usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun7i-a20-usb-phy";
- reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+ reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
@@ -716,6 +732,17 @@
status = "disabled";
};
+ csi1: csi@1c1d000 {
+ compatible = "allwinner,sun7i-a20-csi1",
+ "allwinner,sun4i-a10-csi1";
+ reg = <0x01c1d000 0x1000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+ clock-names = "bus", "ram";
+ resets = <&ccu RST_CSI1>;
+ status = "disabled";
+ };
+
spi3: spi@1c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
@@ -751,21 +778,70 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
+ /omit-if-no-ref/
+ can_pa_pins: can-pa-pins {
+ pins = "PA16", "PA17";
+ function = "can";
+ };
+
+ /omit-if-no-ref/
can_ph_pins: can-ph-pins {
pins = "PH20", "PH21";
function = "can";
};
+ /omit-if-no-ref/
clk_out_a_pin: clk-out-a-pin {
pins = "PI12";
function = "clk_out_a";
};
+ /omit-if-no-ref/
clk_out_b_pin: clk-out-b-pin {
pins = "PI13";
function = "clk_out_b";
};
+ /omit-if-no-ref/
+ csi0_8bits_pins: csi-8bits-pins {
+ pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+ "PE6", "PE7", "PE8", "PE9", "PE10",
+ "PE11";
+ function = "csi0";
+ };
+
+ /omit-if-no-ref/
+ csi0_clk_pin: csi-clk-pin {
+ pins = "PE1";
+ function = "csi0";
+ };
+
+ /omit-if-no-ref/
+ csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+ pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+ "PG6", "PG7", "PG8", "PG9", "PG10",
+ "PG11";
+ function = "csi1";
+ };
+
+ /omit-if-no-ref/
+ csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+ pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+ "PH5", "PH6", "PH7", "PH8", "PH9",
+ "PH10", "PH11", "PH12", "PH13", "PH14",
+ "PH15", "PH16", "PH17", "PH18", "PH19",
+ "PH20", "PH21", "PH22", "PH23", "PH24",
+ "PH25", "PH26", "PH27";
+ function = "csi1";
+ };
+
+ /omit-if-no-ref/
+ csi1_clk_pg_pin: csi1-clk-pg-pin {
+ pins = "PG1";
+ function = "csi1";
+ };
+
+ /omit-if-no-ref/
emac_pa_pins: emac-pa-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
@@ -775,6 +851,17 @@
function = "emac";
};
+ /omit-if-no-ref/
+ emac_ph_pins: emac-ph-pins {
+ pins = "PH8", "PH9", "PH10", "PH11",
+ "PH14", "PH15", "PH16", "PH17",
+ "PH18", "PH19", "PH20", "PH21",
+ "PH22", "PH23", "PH24", "PH25",
+ "PH26";
+ function = "emac";
+ };
+
+ /omit-if-no-ref/
gmac_mii_pins: gmac-mii-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
@@ -784,6 +871,7 @@
function = "gmac";
};
+ /omit-if-no-ref/
gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
@@ -798,46 +886,69 @@
drive-strength = <40>;
};
+ /omit-if-no-ref/
i2c0_pins: i2c0-pins {
pins = "PB0", "PB1";
function = "i2c0";
};
+ /omit-if-no-ref/
i2c1_pins: i2c1-pins {
pins = "PB18", "PB19";
function = "i2c1";
};
+ /omit-if-no-ref/
i2c2_pins: i2c2-pins {
pins = "PB20", "PB21";
function = "i2c2";
};
+ /omit-if-no-ref/
i2c3_pins: i2c3-pins {
pins = "PI0", "PI1";
function = "i2c3";
};
+ /omit-if-no-ref/
ir0_rx_pin: ir0-rx-pin {
pins = "PB4";
function = "ir0";
};
+ /omit-if-no-ref/
ir0_tx_pin: ir0-tx-pin {
pins = "PB3";
function = "ir0";
};
+ /omit-if-no-ref/
ir1_rx_pin: ir1-rx-pin {
pins = "PB23";
function = "ir1";
};
+ /omit-if-no-ref/
ir1_tx_pin: ir1-tx-pin {
pins = "PB22";
function = "ir1";
};
+ /omit-if-no-ref/
+ lcd_lvds0_pins: lcd-lvds0-pins {
+ pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+ "PD5", "PD6", "PD7", "PD8", "PD9";
+ function = "lvds0";
+ };
+
+ /omit-if-no-ref/
+ lcd_lvds1_pins: lcd-lvds1-pins {
+ pins = "PD10", "PD11", "PD12", "PD13", "PD14",
+ "PD15", "PD16", "PD17", "PD18", "PD19";
+ function = "lvds1";
+ };
+
+ /omit-if-no-ref/
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
@@ -846,6 +957,7 @@
bias-pull-up;
};
+ /omit-if-no-ref/
mmc2_pins: mmc2-pins {
pins = "PC6", "PC7", "PC8",
"PC9", "PC10", "PC11";
@@ -854,6 +966,7 @@
bias-pull-up;
};
+ /omit-if-no-ref/
mmc3_pins: mmc3-pins {
pins = "PI4", "PI5", "PI6",
"PI7", "PI8", "PI9";
@@ -862,127 +975,206 @@
bias-pull-up;
};
+ /omit-if-no-ref/
ps2_0_pins: ps2-0-pins {
pins = "PI20", "PI21";
function = "ps2";
};
+ /omit-if-no-ref/
ps2_1_ph_pins: ps2-1-ph-pins {
pins = "PH12", "PH13";
function = "ps2";
};
+ /omit-if-no-ref/
pwm0_pin: pwm0-pin {
pins = "PB2";
function = "pwm";
};
+ /omit-if-no-ref/
pwm1_pin: pwm1-pin {
pins = "PI3";
function = "pwm";
};
+ /omit-if-no-ref/
spdif_tx_pin: spdif-tx-pin {
pins = "PB13";
function = "spdif";
bias-pull-up;
};
+ /omit-if-no-ref/
spi0_pi_pins: spi0-pi-pins {
pins = "PI11", "PI12", "PI13";
function = "spi0";
};
+ /omit-if-no-ref/
spi0_cs0_pi_pin: spi0-cs0-pi-pin {
pins = "PI10";
function = "spi0";
};
+ /omit-if-no-ref/
spi0_cs1_pi_pin: spi0-cs1-pi-pin {
pins = "PI14";
function = "spi0";
};
+ /omit-if-no-ref/
spi1_pi_pins: spi1-pi-pins {
pins = "PI17", "PI18", "PI19";
function = "spi1";
};
+ /omit-if-no-ref/
spi1_cs0_pi_pin: spi1-cs0-pi-pin {
pins = "PI16";
function = "spi1";
};
+ /omit-if-no-ref/
spi2_pb_pins: spi2-pb-pins {
pins = "PB15", "PB16", "PB17";
function = "spi2";
};
+ /omit-if-no-ref/
spi2_cs0_pb_pin: spi2-cs0-pb-pin {
pins = "PB14";
function = "spi2";
};
+ /omit-if-no-ref/
spi2_pc_pins: spi2-pc-pins {
pins = "PC20", "PC21", "PC22";
function = "spi2";
};
+ /omit-if-no-ref/
spi2_cs0_pc_pin: spi2-cs0-pc-pin {
pins = "PC19";
function = "spi2";
};
+ /omit-if-no-ref/
uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
};
+ /omit-if-no-ref/
+ uart0_pf_pins: uart0-pf-pins {
+ pins = "PF2", "PF4";
+ function = "uart0";
+ };
+
+ /omit-if-no-ref/
+ uart1_pa_pins: uart1-pa-pins {
+ pins = "PA10", "PA11";
+ function = "uart1";
+ };
+
+ /omit-if-no-ref/
+ uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins {
+ pins = "PA12", "PA13";
+ function = "uart1";
+ };
+
+ /omit-if-no-ref/
+ uart2_pa_pins: uart2-pa-pins {
+ pins = "PA2", "PA3";
+ function = "uart2";
+ };
+
+ /omit-if-no-ref/
+ uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins {
+ pins = "PA0", "PA1";
+ function = "uart2";
+ };
+
+ /omit-if-no-ref/
uart2_pi_pins: uart2-pi-pins {
pins = "PI18", "PI19";
function = "uart2";
};
+ /omit-if-no-ref/
uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins {
pins = "PI16", "PI17";
function = "uart2";
};
+ /omit-if-no-ref/
uart3_pg_pins: uart3-pg-pins {
pins = "PG6", "PG7";
function = "uart3";
};
+ /omit-if-no-ref/
uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
pins = "PG8", "PG9";
function = "uart3";
};
+ /omit-if-no-ref/
uart3_ph_pins: uart3-ph-pins {
pins = "PH0", "PH1";
function = "uart3";
};
+ /omit-if-no-ref/
+ uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins {
+ pins = "PH2", "PH3";
+ function = "uart3";
+ };
+
+ /omit-if-no-ref/
uart4_pg_pins: uart4-pg-pins {
pins = "PG10", "PG11";
function = "uart4";
};
+ /omit-if-no-ref/
uart4_ph_pins: uart4-ph-pins {
pins = "PH4", "PH5";
function = "uart4";
};
+ /omit-if-no-ref/
+ uart5_ph_pins: uart5-ph-pins {
+ pins = "PH6", "PH7";
+ function = "uart5";
+ };
+
+ /omit-if-no-ref/
uart5_pi_pins: uart5-pi-pins {
pins = "PI10", "PI11";
function = "uart5";
};
+ /omit-if-no-ref/
+ uart6_pa_pins: uart6-pa-pins {
+ pins = "PA12", "PA13";
+ function = "uart6";
+ };
+
+ /omit-if-no-ref/
uart6_pi_pins: uart6-pi-pins {
pins = "PI12", "PI13";
function = "uart6";
};
+ /omit-if-no-ref/
+ uart7_pa_pins: uart7-pa-pins {
+ pins = "PA14", "PA15";
+ function = "uart7";
+ };
+
+ /omit-if-no-ref/
uart7_pi_pins: uart7-pi-pins {
pins = "PI20", "PI21";
function = "uart7";
@@ -1004,6 +1196,8 @@
wdt: watchdog@1c20c90 {
compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
};
rtc: rtc@1c20d00 {
@@ -1326,8 +1520,12 @@
snps,fixed-burst;
snps,force_sf_dma_mode;
status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
+
+ gmac_mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
hstimer@1c60000 {
@@ -1341,7 +1539,7 @@
};
gic: interrupt-controller@1c81000 {
- compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
diff --git a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
index eaff6fa401..431f70234d 100644
--- a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
@@ -107,6 +107,14 @@
};
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+ cpu-supply = <&reg_dcdc3>;
+};
+
&de {
status = "okay";
};
@@ -123,7 +131,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_sw>;
phy-handle = <&rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
allwinner,rx-delay-ps = <700>;
allwinner,tx-delay-ps = <700>;
status = "okay";
@@ -183,6 +191,11 @@
status = "okay";
};
+&r_cir {
+ clock-frequency = <3000000>;
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
@@ -224,6 +237,14 @@
#include "axp81x.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
@@ -301,8 +322,8 @@
&reg_dldo3 {
regulator-always-on;
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pd";
};
@@ -350,11 +371,37 @@
status = "okay";
};
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&ac100_rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_dldo1>;
+ vddio-supply = <&reg_dldo1>;
+ device-wakeup-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ };
+};
+
&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
status = "okay";
};
&usbphy {
+ usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
index 5dba4fc310..d8326a5c68 100644
--- a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
@@ -60,6 +60,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -90,7 +101,7 @@
initial-mode = <1>; /* initialize in HUB mode */
disabled-ports = <1>;
intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
- reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+ reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
refclk-frequency = <19200000>;
};
@@ -145,6 +156,18 @@
};
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+ cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+ status = "okay";
+};
+
&ehci0 {
/* GL830 USB-to-SATA bridge here */
status = "okay";
@@ -160,10 +183,20 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_dldo4>;
phy-handle = <&rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&hdmi {
status = "okay";
};
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&mdio {
rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
@@ -239,6 +272,14 @@
#include "axp81x.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
@@ -386,11 +427,37 @@
status = "okay";
};
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ clocks = <&ac100_rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_dcdc1>;
+ vddio-supply = <&reg_sw>;
+ device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+ host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ };
+};
+
&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
status = "okay";
};
&usbphy {
+ usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
index 71fb732089..babf4cf1b2 100644
--- a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -53,11 +53,6 @@
};
};
-&emac {
- /* LEDs changed to active high on the plus */
- /delete-property/ allwinner,leds-active-low;
-};
-
&mmc1 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
index 6dbf7b2e0c..b6ca45d18e 100644
--- a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
@@ -67,7 +67,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts
index b8f46e2802..251bbab7d7 100644
--- a/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -70,6 +70,21 @@
};
};
+ leds {
+ compatible = "gpio-leds";
+
+ pwr {
+ label = "orangepi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ status {
+ label = "orangepi:red:status";
+ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
@@ -88,6 +103,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&hdmi {
status = "okay";
};
@@ -132,8 +151,27 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
+
+&usb_otg {
+ /*
+ * According to schematics CN1 MicroUSB port can be used to take
+ * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+ * port cannot provide power externally even if the board is powered
+ * via GPIO pins. It thus makes sense to force peripheral mode.
+ */
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
index 15c22b06fc..47954551f5 100644
--- a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -120,7 +120,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <&reg_dc1sw>;
status = "okay";
};
@@ -198,16 +198,16 @@
};
&reg_dc1sw {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-name = "vcc-gmac-phy";
};
&reg_dcdc1 {
regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc-3v0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
};
&reg_dcdc2 {
diff --git a/arch/arm/dts/sun9i-a80-cubieboard4.dts b/arch/arm/dts/sun9i-a80-cubieboard4.dts
index 85da85faf8..484b93df20 100644
--- a/arch/arm/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/dts/sun9i-a80-cubieboard4.dts
@@ -89,31 +89,23 @@
vga-dac {
compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac";
vdd-supply = <&reg_dcdc1>;
- #address-cells = <1>;
- #size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- vga_dac_in: endpoint@0 {
- reg = <0>;
+ vga_dac_in: endpoint {
remote-endpoint = <&tcon0_out_vga>;
};
};
port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- vga_dac_out: endpoint@0 {
- reg = <0>;
+ vga_dac_out: endpoint {
remote-endpoint = <&vga_con_in>;
};
};
@@ -133,12 +125,27 @@
status = "okay";
};
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_rgmii_pins>;
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&reg_cldo1>;
+ status = "okay";
+};
+
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
status = "okay";
};
+&mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
@@ -183,10 +190,26 @@
clocks = <&ac100_rtc 0>;
};
+&pio {
+ vcc-pa-supply = <&reg_ldo_io1>;
+ vcc-pb-supply = <&reg_aldo2>;
+ vcc-pc-supply = <&reg_dcdc1>;
+ vcc-pd-supply = <&reg_dc1sw>;
+ vcc-pe-supply = <&reg_eldo2>;
+ vcc-pf-supply = <&reg_dcdc1>;
+ vcc-pg-supply = <&reg_ldo_io0>;
+ vcc-ph-supply = <&reg_dcdc1>;
+};
+
&r_ir {
status = "okay";
};
+&r_pio {
+ vcc-pl-supply = <&reg_dldo2>;
+ vcc-pm-supply = <&reg_eldo3>;
+};
+
&r_rsb {
status = "okay";
@@ -217,6 +240,10 @@
/* unused */
};
+ reg_dc1sw: dc1sw {
+ regulator-name = "vcc-pd";
+ };
+
reg_dc5ldo: dc5ldo {
regulator-always-on;
regulator-min-microvolt = <800000>;
@@ -271,7 +298,6 @@
};
reg_dldo2: dldo2 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pl";
@@ -290,14 +316,12 @@
};
reg_eldo3: eldo3 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pm-codec-io1";
};
reg_ldo_io0: ldo_io0 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pg";
@@ -385,6 +409,14 @@
*/
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ /*
+ * The PHY requires 20ms after all voltages
+ * are applied until core logic is ready and
+ * 30ms after the reset pin is de-asserted.
+ * Set a 100ms delay to account for PMIC
+ * ramp time and board traces.
+ */
+ regulator-enable-ramp-delay = <100000>;
regulator-name = "vcc-gmac-phy";
};
@@ -464,8 +496,7 @@
};
&tcon0_out {
- tcon0_out_vga: endpoint@0 {
- reg = <0>;
+ tcon0_out_vga: endpoint {
remote-endpoint = <&vga_dac_in>;
};
};
diff --git a/arch/arm/dts/sun9i-a80-optimus.dts b/arch/arm/dts/sun9i-a80-optimus.dts
index 58a199b0e4..5c3580d712 100644
--- a/arch/arm/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/dts/sun9i-a80-optimus.dts
@@ -82,7 +82,7 @@
reg_usb1_vbus: usb1-vbus {
compatible = "regulator-fixed";
- pinctrl-names = "default";
+ regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
@@ -91,7 +91,7 @@
reg_usb3_vbus: usb3-vbus {
compatible = "regulator-fixed";
- pinctrl-names = "default";
+ regulator-name = "usb3-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
@@ -120,6 +120,21 @@
status = "okay";
};
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_rgmii_pins>;
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&reg_cldo1>;
+ status = "okay";
+};
+
+&mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
@@ -172,10 +187,26 @@
clocks = <&ac100_rtc 0>;
};
+&pio {
+ vcc-pa-supply = <&reg_ldo_io1>;
+ vcc-pb-supply = <&reg_aldo2>;
+ vcc-pc-supply = <&reg_dcdc1>;
+ vcc-pd-supply = <&reg_dcdc1>;
+ vcc-pe-supply = <&reg_eldo2>;
+ vcc-pf-supply = <&reg_dcdc1>;
+ vcc-pg-supply = <&reg_ldo_io0>;
+ vcc-ph-supply = <&reg_dcdc1>;
+};
+
&r_ir {
status = "okay";
};
+&r_pio {
+ vcc-pl-supply = <&reg_dldo2>;
+ vcc-pm-supply = <&reg_eldo3>;
+};
+
&r_rsb {
status = "okay";
@@ -213,6 +244,10 @@
regulator-name = "vdd-cpus-09-usbh";
};
+ dc1sw {
+ /* unused */
+ };
+
reg_dcdc1: dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
@@ -260,7 +295,6 @@
};
reg_dldo2: dldo2 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pl";
@@ -279,14 +313,12 @@
};
reg_eldo3: eldo3 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pm-codec-io1";
};
reg_ldo_io0: ldo_io0 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pg";
@@ -374,6 +406,14 @@
*/
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ /*
+ * The PHY requires 20ms after all voltages
+ * are applied until core logic is ready and
+ * 30ms after the reset pin is de-asserted.
+ * Set a 100ms delay to account for PMIC
+ * ramp time and board traces.
+ */
+ regulator-enable-ramp-delay = <100000>;
regulator-name = "vcc-gmac-phy";
};
diff --git a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
index 39263e74fb..8e5cb3b3fd 100644
--- a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
@@ -126,7 +126,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
--
2.29.2
Reference in New Issue View Git Blame Copy Permalink