uboot-tools/0007-Switch-omap4-boards-to-use-config_distro_defaults-an.patch
Peter Robinson 7a2a3182c9 - Update to 2015.04 rc3
- Enable AllWinner: OLinuXino-Lime2 Mele_M3
- Enable i.MX6: novena hummingboard
- Enable TI: Beagle-X15
2015-03-06 13:05:47 +00:00

90 lines
2.5 KiB
Diff

From 07a6e8cf586b2cf541edabb5d11d0789833a4d99 Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Fri, 6 Mar 2015 10:38:05 +0000
Subject: [PATCH 07/11] Switch omap4 boards to use config_distro_defaults and
config_distro_bootcmd.
Add pxefile_addr_r to DEFAULT_LINUX_BOOT_ENV, as pxefile_addr_r is used
to store the pxe boot configuation file in config_distro_defaults.
adjust adress of scriptaddr to be unique
---
include/configs/ti_armv7_common.h | 3 ++-
include/configs/ti_omap4_common.h | 39 ++++++++++++++++-----------------------
2 files changed, 18 insertions(+), 24 deletions(-)
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index e409c7f..f280534 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -54,7 +54,8 @@
#define DEFAULT_LINUX_BOOT_ENV \
"loadaddr=0x82000000\0" \
"kernel_addr_r=0x82000000\0" \
- "scriptaddr=0x82000000\0" \
+ "pxefile_addr_r=0x87F00000\0" \
+ "scriptaddr=0x87E00000\0" \
"fdtaddr=0x88000000\0" \
"fdt_addr_r=0x88000000\0" \
"rdaddr=0x88080000\0" \
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index 1c93aab..5402793 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -82,6 +82,18 @@
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+#include <config_distro_bootcmd.h>
+
+#define BOOTENV_INIT_COMMAND "run findfdt ;"
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0) \
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na)
+
/*
* Environment setup
*/
@@ -129,30 +141,11 @@
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+ BOOTENV
-#define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "echo SD/MMC found on device ${mmcdev};" \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadbootenv; then " \
- "run importbootenv; " \
- "fi;" \
- "if test -n ${uenvcmd}; then " \
- "echo Running uenvcmd ...;" \
- "run uenvcmd;" \
- "fi;" \
- "fi;" \
- "if run loadimage; then " \
- "run loadfdt;" \
- "run mmcboot; " \
- "fi; " \
- "if run loaduimage; then " \
- "run uimageboot;" \
- "fi; " \
- "fi"
+#else
+#define BOOT_TARGET_DEVICES
+#endif
/*
* Defines for SPL
--
2.3.1