rpms/uboot-tools
3
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
37df227bc0
uboot-tools/0002-Revert-mmc-rockchip_sdhci-add-phy-and-clock-config-f.patch
Peter Robinson 37df227bc0 Fixes for Rockchip devices 
Fix booting from MMC for Rockchip 3399 (rhbz #2014182)
Enable new rk3399 devices (Leez, NanoPi-M4B, NanoPi-4S, NanoPi-T4) (rhbz #2009126)
2021-10-17 15:57:39 +01:00

407 lines
11 KiB
Diff
Raw Blame History

From bb7b9097efc67ff6051f206e3ac9602dabbfc33e Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Thu, 14 Oct 2021 16:02:03 +0100
Subject: [PATCH 2/2] Revert "mmc: rockchip_sdhci: add phy and clock config for
rk3399"
This reverts commit ac804143cfd128d144403ef2434344988c3fde9f.
---
drivers/mmc/rockchip_sdhci.c | 313 ++++-------------------------------
1 file changed, 36 insertions(+), 277 deletions(-)
diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c
index eff134c8f5..d95f8b2a15 100644
--- a/drivers/mmc/rockchip_sdhci.c
+++ b/drivers/mmc/rockchip_sdhci.c
@@ -6,322 +6,90 @@
*/
#include <common.h>
-#include <clk.h>
#include <dm.h>
-#include <dm/ofnode.h>
#include <dt-structs.h>
-#include <linux/delay.h>
#include <linux/err.h>
#include <linux/libfdt.h>
-#include <linux/iopoll.h>
#include <malloc.h>
#include <mapmem.h>
-#include "mmc_private.h"
#include <sdhci.h>
-#include <syscon.h>
-#include <asm/arch-rockchip/clock.h>
-#include <asm/arch-rockchip/hardware.h>
+#include <clk.h>
/* 400KHz is max freq for card ID etc. Use that as min */
#define EMMC_MIN_FREQ 400000
-#define KHz (1000)
-#define MHz (1000 * KHz)
-#define SDHCI_TUNING_LOOP_COUNT 40
-
-#define PHYCTRL_CALDONE_MASK 0x1
-#define PHYCTRL_CALDONE_SHIFT 0x6
-#define PHYCTRL_CALDONE_DONE 0x1
-#define PHYCTRL_DLLRDY_MASK 0x1
-#define PHYCTRL_DLLRDY_SHIFT 0x5
-#define PHYCTRL_DLLRDY_DONE 0x1
-#define PHYCTRL_FREQSEL_200M 0x0
-#define PHYCTRL_FREQSEL_50M 0x1
-#define PHYCTRL_FREQSEL_100M 0x2
-#define PHYCTRL_FREQSEL_150M 0x3
-#define PHYCTRL_DLL_LOCK_WO_TMOUT(x) \
- ((((x) >> PHYCTRL_DLLRDY_SHIFT) & PHYCTRL_DLLRDY_MASK) ==\
- PHYCTRL_DLLRDY_DONE)
struct rockchip_sdhc_plat {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+ struct dtd_rockchip_rk3399_sdhci_5_1 dtplat;
+#endif
struct mmc_config cfg;
struct mmc mmc;
};
-struct rockchip_emmc_phy {
- u32 emmcphy_con[7];
- u32 reserved;
- u32 emmcphy_status;
-};
-
struct rockchip_sdhc {
struct sdhci_host host;
- struct udevice *dev;
void *base;
- struct rockchip_emmc_phy *phy;
- struct clk emmc_clk;
-};
-
-struct sdhci_data {
- int (*emmc_set_clock)(struct sdhci_host *host, unsigned int clock);
- int (*emmc_phy_init)(struct udevice *dev);
- int (*get_phy)(struct udevice *dev);
-};
-
-static int rk3399_emmc_phy_init(struct udevice *dev)
-{
- return 0;
-}
-
-static void rk3399_emmc_phy_power_on(struct rockchip_emmc_phy *phy, u32 clock)
-{
- u32 caldone, dllrdy, freqsel;
-
- writel(RK_CLRSETBITS(7 << 4, 0), &phy->emmcphy_con[6]);
- writel(RK_CLRSETBITS(1 << 11, 1 << 11), &phy->emmcphy_con[0]);
- writel(RK_CLRSETBITS(0xf << 7, 6 << 7), &phy->emmcphy_con[0]);
-
- /*
- * According to the user manual, calpad calibration
- * cycle takes more than 2us without the minimal recommended
- * value, so we may need a little margin here
- */
- udelay(3);
- writel(RK_CLRSETBITS(1, 1), &phy->emmcphy_con[6]);
-
- /*
- * According to the user manual, it asks driver to
- * wait 5us for calpad busy trimming. But it seems that
- * 5us of caldone isn't enough for all cases.
- */
- udelay(500);
- caldone = readl(&phy->emmcphy_status);
- caldone = (caldone >> PHYCTRL_CALDONE_SHIFT) & PHYCTRL_CALDONE_MASK;
- if (caldone != PHYCTRL_CALDONE_DONE) {
- printf("%s: caldone timeout.\n", __func__);
- return;
- }
-
- /* Set the frequency of the DLL operation */
- if (clock < 75 * MHz)
- freqsel = PHYCTRL_FREQSEL_50M;
- else if (clock < 125 * MHz)
- freqsel = PHYCTRL_FREQSEL_100M;
- else if (clock < 175 * MHz)
- freqsel = PHYCTRL_FREQSEL_150M;
- else
- freqsel = PHYCTRL_FREQSEL_200M;
-
- /* Set the frequency of the DLL operation */
- writel(RK_CLRSETBITS(3 << 12, freqsel << 12), &phy->emmcphy_con[0]);
- writel(RK_CLRSETBITS(1 << 1, 1 << 1), &phy->emmcphy_con[6]);
-
- read_poll_timeout(readl, &phy->emmcphy_status, dllrdy,
- PHYCTRL_DLL_LOCK_WO_TMOUT(dllrdy), 1, 5000);
-}
-
-static void rk3399_emmc_phy_power_off(struct rockchip_emmc_phy *phy)
-{
- writel(RK_CLRSETBITS(1, 0), &phy->emmcphy_con[6]);
- writel(RK_CLRSETBITS(1 << 1, 0), &phy->emmcphy_con[6]);
-}
-
-static int rk3399_emmc_get_phy(struct udevice *dev)
-{
- struct rockchip_sdhc *priv = dev_get_priv(dev);
- ofnode phy_node;
- void *grf_base;
- u32 grf_phy_offset, phandle;
-
- phandle = dev_read_u32_default(dev, "phys", 0);
- phy_node = ofnode_get_by_phandle(phandle);
- if (!ofnode_valid(phy_node)) {
- debug("Not found emmc phy device\n");
- return -ENODEV;
- }
-
- grf_base = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
- if (grf_base < 0) {
- printf("%s Get syscon grf failed", __func__);
- return -ENODEV;
- }
- grf_phy_offset = ofnode_read_u32_default(phy_node, "reg", 0);
-
- priv->phy = (struct rockchip_emmc_phy *)(grf_base + grf_phy_offset);
-
- return 0;
-}
-
-static int rk3399_sdhci_emmc_set_clock(struct sdhci_host *host, unsigned int clock)
-{
- struct rockchip_sdhc *priv = container_of(host, struct rockchip_sdhc, host);
- int cycle_phy = host->clock != clock && clock > EMMC_MIN_FREQ;
-
- if (cycle_phy)
- rk3399_emmc_phy_power_off(priv->phy);
-
- sdhci_set_clock(host->mmc, clock);
-
- if (cycle_phy)
- rk3399_emmc_phy_power_on(priv->phy, clock);
-
- return 0;
-}
-
-static int rockchip_sdhci_set_ios_post(struct sdhci_host *host)
-{
- struct rockchip_sdhc *priv = container_of(host, struct rockchip_sdhc, host);
- struct sdhci_data *data = (struct sdhci_data *)dev_get_driver_data(priv->dev);
- struct mmc *mmc = host->mmc;
- uint clock = mmc->tran_speed;
- u32 reg;
-
- if (!clock)
- clock = mmc->clock;
-
- if (data->emmc_set_clock)
- data->emmc_set_clock(host, clock);
-
- if (mmc->selected_mode == MMC_HS_400 || mmc->selected_mode == MMC_HS_400_ES) {
- reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
- reg &= ~SDHCI_CTRL_UHS_MASK;
- reg |= SDHCI_CTRL_HS400;
- sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
- } else {
- sdhci_set_uhs_timing(host);
- }
-
- return 0;
-}
-
-static int rockchip_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
-{
- struct sdhci_host *host = dev_get_priv(mmc->dev);
- char tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT;
- struct mmc_cmd cmd;
- u32 ctrl, blk_size;
- int ret = 0;
-
- ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
- ctrl |= SDHCI_CTRL_EXEC_TUNING;
- sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
-
- sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
- sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);
-
- blk_size = SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, 64);
- if (opcode == MMC_CMD_SEND_TUNING_BLOCK_HS200 && host->mmc->bus_width == 8)
- blk_size = SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, 128);
- sdhci_writew(host, blk_size, SDHCI_BLOCK_SIZE);
- sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
-
- cmd.cmdidx = opcode;
- cmd.resp_type = MMC_RSP_R1;
- cmd.cmdarg = 0;
-
- do {
- if (tuning_loop_counter-- == 0)
- break;
-
- mmc_send_cmd(mmc, &cmd, NULL);
-
- if (opcode == MMC_CMD_SEND_TUNING_BLOCK)
- /*
- * For tuning command, do not do busy loop. As tuning
- * is happening (CLK-DATA latching for setup/hold time
- * requirements), give time to complete
- */
- udelay(1);
-
- ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
- } while (ctrl & SDHCI_CTRL_EXEC_TUNING);
-
- if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
- printf("%s:Tuning failed\n", __func__);
- ret = -EIO;
- }
-
- if (tuning_loop_counter < 0) {
- ctrl &= ~SDHCI_CTRL_TUNED_CLK;
- sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL2);
- }
-
- /* Enable only interrupts served by the SD controller */
- sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK, SDHCI_INT_ENABLE);
- /* Mask all sdhci interrupt sources */
- sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
-
- return ret;
-}
-
-static struct sdhci_ops rockchip_sdhci_ops = {
- .set_ios_post = rockchip_sdhci_set_ios_post,
- .platform_execute_tuning = &rockchip_sdhci_execute_tuning,
};
-static int rockchip_sdhci_probe(struct udevice *dev)
+static int arasan_sdhci_probe(struct udevice *dev)
{
- struct sdhci_data *data = (struct sdhci_data *)dev_get_driver_data(dev);
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
struct rockchip_sdhc_plat *plat = dev_get_plat(dev);
struct rockchip_sdhc *prv = dev_get_priv(dev);
- struct mmc_config *cfg = &plat->cfg;
struct sdhci_host *host = &prv->host;
+ int max_frequency, ret;
struct clk clk;
- int ret;
- host->max_clk = cfg->f_max;
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+ struct dtd_rockchip_rk3399_sdhci_5_1 *dtplat = &plat->dtplat;
+
+ host->name = dev->name;
+ host->ioaddr = map_sysmem(dtplat->reg[0], dtplat->reg[1]);
+ max_frequency = dtplat->max_frequency;
+ ret = clk_get_by_driver_info(dev, dtplat->clocks, &clk);
+#else
+ max_frequency = dev_read_u32_default(dev, "max-frequency", 0);
ret = clk_get_by_index(dev, 0, &clk);
+#endif
if (!ret) {
- ret = clk_set_rate(&clk, host->max_clk);
+ ret = clk_set_rate(&clk, max_frequency);
if (IS_ERR_VALUE(ret))
printf("%s clk set rate fail!\n", __func__);
} else {
printf("%s fail to get clk\n", __func__);
}
- prv->emmc_clk = clk;
- prv->dev = dev;
-
- if (data->get_phy) {
- ret = data->get_phy(dev);
- if (ret)
- return ret;
- }
-
- if (data->emmc_phy_init) {
- ret = data->emmc_phy_init(dev);
- if (ret)
- return ret;
- }
-
- host->ops = &rockchip_sdhci_ops;
host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD;
+ host->max_clk = max_frequency;
+ /*
+ * The sdhci-driver only supports 4bit and 8bit, as sdhci_setup_cfg
+ * doesn't allow us to clear MMC_MODE_4BIT. Consequently, we don't
+ * check for other bus-width values.
+ */
+ if (host->bus_width == 8)
+ host->host_caps |= MMC_MODE_8BIT;
host->mmc = &plat->mmc;
host->mmc->priv = &prv->host;
host->mmc->dev = dev;
upriv->mmc = host->mmc;
- ret = sdhci_setup_cfg(cfg, host, cfg->f_max, EMMC_MIN_FREQ);
+ ret = sdhci_setup_cfg(&plat->cfg, host, 0, EMMC_MIN_FREQ);
if (ret)
return ret;
return sdhci_probe(dev);
}
-static int rockchip_sdhci_of_to_plat(struct udevice *dev)
+static int arasan_sdhci_of_to_plat(struct udevice *dev)
{
- struct rockchip_sdhc_plat *plat = dev_get_plat(dev);
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
struct sdhci_host *host = dev_get_priv(dev);
- struct mmc_config *cfg = &plat->cfg;
- int ret;
host->name = dev->name;
host->ioaddr = dev_read_addr_ptr(dev);
-
- ret = mmc_of_parse(dev, cfg);
- if (ret)
- return ret;
+ host->bus_width = dev_read_u32_default(dev, "bus-width", 4);
+#endif
return 0;
}
@@ -333,28 +101,19 @@ static int rockchip_sdhci_bind(struct udevice *dev)
return sdhci_bind(dev, &plat->mmc, &plat->cfg);
}
-static const struct sdhci_data rk3399_data = {
- .emmc_set_clock = rk3399_sdhci_emmc_set_clock,
- .get_phy = rk3399_emmc_get_phy,
- .emmc_phy_init = rk3399_emmc_phy_init,
-};
-
-static const struct udevice_id sdhci_ids[] = {
- {
- .compatible = "arasan,sdhci-5.1",
- .data = (ulong)&rk3399_data,
- },
+static const struct udevice_id arasan_sdhci_ids[] = {
+ { .compatible = "arasan,sdhci-5.1" },
{ }
};
U_BOOT_DRIVER(arasan_sdhci_drv) = {
- .name = "rockchip_sdhci_5_1",
+ .name = "rockchip_rk3399_sdhci_5_1",
.id = UCLASS_MMC,
- .of_match = sdhci_ids,
- .of_to_plat = rockchip_sdhci_of_to_plat,
+ .of_match = arasan_sdhci_ids,
+ .of_to_plat = arasan_sdhci_of_to_plat,
.ops = &sdhci_ops,
.bind = rockchip_sdhci_bind,
- .probe = rockchip_sdhci_probe,
+ .probe = arasan_sdhci_probe,
.priv_auto = sizeof(struct rockchip_sdhc),
.plat_auto = sizeof(struct rockchip_sdhc_plat),
};
--
2.33.0
Reference in New Issue View Git Blame Copy Permalink