uboot-tools/mmc-fsl_esdhc-Avoid-infinit...

86 lines
2.7 KiB
Diff

From patchwork Mon Nov 19 12:31:53 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [U-Boot,
v2] mmc: fsl_esdhc: Avoid infinite loop in esdhc_send_cmd_common()
X-Patchwork-Submitter: Fabio Estevam <festevam@gmail.com>
X-Patchwork-Id: 999792
Message-Id: <1542630713-30355-1-git-send-email-festevam@gmail.com>
To: jh80.chung@samsung.com
Cc: baruch@tkos.co.il, u-boot@lists.denx.de
Date: Mon, 19 Nov 2018 10:31:53 -0200
From: Fabio Estevam <festevam@gmail.com>
List-Id: U-Boot discussion <u-boot.lists.denx.de>
The following hang is observed on a Hummingboard 2 MicroSOM
i2eX iMX6D - rev 1.3 with no eMMC populated on board:
U-Boot SPL 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
Trying to boot from MMC1
U-Boot 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
CPU: Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 33C
Reset cause: POR
Board: MX6 HummingBoard2
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment
No panel detected: default to HDMI
Display: HDMI (1024x768)
In: serial
Out: serial
Err: serial
---> hangs
which is caused by the following infinite loop inside esdhc_send_cmd_common()
while (!(esdhc_read32(&regs->irqstat) & flags))
;
Instead of looping forever, provide an exit path so that a timeout
error can be propagated in the case irqstat does not report
any interrupts, which may happen when no eMMC is populated on
board.
Reported-by: Ricardo Salveti <rsalveti@rsalveti.net>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Jump to the label out on error path (Baruch).
drivers/mmc/fsl_esdhc.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 3cdfa7f..b8d0b00 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -396,6 +396,7 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
uint irqstat;
u32 flags = IRQSTAT_CC | IRQSTAT_CTOE;
struct fsl_esdhc *regs = priv->esdhc_regs;
+ unsigned long start;
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
@@ -453,8 +454,13 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
flags = IRQSTAT_BRR;
/* Wait for the command to complete */
- while (!(esdhc_read32(&regs->irqstat) & flags))
- ;
+ start = get_timer(0);
+ while (!(esdhc_read32(&regs->irqstat) & flags)) {
+ if (get_timer(start) > 1000) {
+ err = -ETIMEDOUT;
+ goto out;
+ }
+ }
irqstat = esdhc_read32(&regs->irqstat);