uboot-tools/0001-TI-Add-use-a-DEFAULT_L...

127 lines
4.2 KiB
Diff

From 797867f56b9e3e2307fc2537b062b8a482d4b472 Mon Sep 17 00:00:00 2001
From: Tom Rini <trini@ti.com>
Date: Tue, 11 Mar 2014 15:42:01 -0400
Subject: [PATCH 01/14] TI: Add, use a DEFAULT_LINUX_BOOT_ENV environment
string
To deal with a reoccurring problem properly we need to specify addresses
for the Linux kernel, Flatted Device Tree and ramdisk that obey the
constraints within the kernel's Documentation/arm/Booting file but also
make sure that we relocate things within a valid address range.
It is possible with these addresses to also set fdt_high and initrd_high
to the value of 0xffffffff. We don't do this by default to allow for
the most likely success of people using custom addresses however.
Signed-off-by: Tom Rini <trini@ti.com>
---
include/configs/am335x_evm.h | 5 +----
include/configs/am43xx_evm.h | 5 +----
include/configs/ti_armv7_common.h | 22 +++++++++++++++++++++-
include/configs/ti_omap4_common.h | 4 +---
include/configs/ti_omap5_common.h | 5 +----
5 files changed, 25 insertions(+), 16 deletions(-)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index ea9e758..4148517 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -61,11 +61,8 @@
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x80200000\0" \
- "fdtaddr=0x80F80000\0" \
- "fdt_high=0xffffffff\0" \
+ DEFAULT_LINUX_BOOT_ENV \
"boot_fdt=try\0" \
- "rdaddr=0x81000000\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 614857d..27777c5 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -112,10 +112,7 @@
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x80200000\0" \
- "fdtaddr=0x80F80000\0" \
- "fdt_high=0xffffffff\0" \
- "rdaddr=0x81000000\0" \
+ DEFAULT_LINUX_BOOT_ENV \
"fdtfile=undefined\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 69d69a5..fda99fb 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -36,8 +36,28 @@
/*
* Our DDR memory always starts at 0x80000000 and U-Boot shall have
* relocated itself to higher in memory by the time this value is used.
+ * However, set this to a 32MB offset to allow for easier Linux kernel
+ * booting as the default is often used as the kernel load address.
*/
-#define CONFIG_SYS_LOAD_ADDR 0x80000000
+#define CONFIG_SYS_LOAD_ADDR 0x82000000
+
+/*
+ * We setup defaults based on constraints from the Linux kernel, which should
+ * also be safe elsewhere. We have the default load at 32MB into DDR (for
+ * the kernel), FDT above 128MB (the maximum location for the end of the
+ * kernel), and the ramdisk 512KB above that (allowing for hopefully never
+ * seen large trees). We say all of this must be within the first 512MB
+ * as that will always be within the kernel lowmem and thus visible via
+ * bootm_size.
+ */
+#define DEFAULT_LINUX_BOOT_ENV \
+ "loadaddr=0x82000000\0" \
+ "kernel_addr_r=0x82000000\0" \
+ "fdtaddr=0x88000000\0" \
+ "fdt_addr_r=0x88000000\0" \
+ "rdaddr=0x88080000\0" \
+ "ramdisk_addr_r=0x88080000\0" \
+ "bootm_size=0x20000000\0"
/*
* Default to a quick boot delay.
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index bcb5eab..387f570 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -87,10 +87,8 @@
* Environment setup
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x82000000\0" \
+ DEFAULT_LINUX_BOOT_ENV \
"console=ttyO2,115200n8\0" \
- "fdt_high=0xffffffff\0" \
- "fdtaddr=0x80f80000\0" \
"fdtfile=undefined\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index 7b10fbd..2443d55 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -70,10 +70,7 @@
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x80200000\0" \
- "fdtaddr=0x80F80000\0" \
- "fdt_high=0xffffffff\0" \
- "rdaddr=0x81000000\0" \
+ DEFAULT_LINUX_BOOT_ENV \
"console=" CONSOLEDEV ",115200n8\0" \
"fdtfile=undefined\0" \
"bootpart=0:2\0" \
--
1.9.0