%global candidate rc2 Name: uboot-tools Version: 2015.01 Release: 0.1%{?candidate:.%{candidate}}%{?dist} Summary: U-Boot utilities Group: Development/Tools License: GPLv2+ BSD LGPL-2.1+ LGPL-2.0+ URL: http://www.denx.de/wiki/U-Boot Source0: ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}%{?candidate:-%{candidate}}.tar.bz2 Patch1: 0001-make-sure-that-the-filesystem-is-a-type-of-fat.patch Patch2: 0002-Allow-checking-in-multiple-partitions-for-scan_dev_f.patch Patch3: 0003-Allow-overriding-boot_partitions-default-value-by-se.patch Patch4: 0004-Add-BOOTENV_INIT_COMMAND-for-commands-that-may-be-ne.patch Patch5: 0005-Add-BOOTENV_POST_COMMAND-which-is-appended-to-the-en.patch Patch6: 0006-Only-set-CONFIG_BOOTDELAY-if-not-already-set.patch Patch7: 0007-Add-support-for-loading-environment-from-uEnv.txt-in.patch Patch8: 0008-Switch-am335x_evm.h-to-use-config_distro_defaults-an.patch Patch9: 0009-port-the-riotboard-to-distro-generic-configs-patch-b.patch Patch10: 0010-port-utilite-to-distro-generic-boot-commands.patch Patch11: 0011-add-back-adding-console-to-the-bootargs-if-not-prese.patch Patch12: 0012-wandboard-port-to-generic-distro-booting.patch Patch13: 0013-Switch-omap4-boards-to-use-config_distro_defaults-an.patch BuildRequires: dtc, openssl-devel BuildRequires: fedora-logos, netpbm-progs BuildRequires: git Requires: dtc %description This package contains a few U-Boot utilities - mkimage for creating boot images and fw_printenv/fw_setenv for manipulating the boot environment variables. %ifarch aarch64 %package -n uboot-images-armv8 Summary: u-boot bootloader images for armv8 boards Requires: uboot-tools %description -n uboot-images-armv8 u-boot bootloader binaries for the aarch64 vexpress_aemv8a %endif %ifarch %{arm} %package -n uboot-images-armv7 Summary: u-boot bootloader images for armv7 boards Requires: uboot-tools Obsoletes: uboot-arndale < %{version}-%{release} Provides: uboot-arndale = %{version}-%{release} Obsoletes: uboot-beagle < %{version}-%{release} Provides: uboot-beagle = %{version}-%{release} Obsoletes: uboot-beaglebone < %{version}-%{release} Provides: uboot-beaglebone = %{version}-%{release} Obsoletes: uboot-highbank < %{version}-%{release} Provides: uboot-highbank = %{version}-%{release} Obsoletes: uboot-panda < %{version}-%{release} Provides: uboot-panda = %{version}-%{release} Obsoletes: uboot-origen < %{version}-%{release} Provides: uboot-origen = %{version}-%{release} Obsoletes: uboot-paz00 < %{version}-%{release} Provides: uboot-paz00 = %{version}-%{release} Obsoletes: uboot-smdkv310 < %{version}-%{release} Provides: uboot-smdkv310 = %{version}-%{release} Obsoletes: uboot-snow < %{version}-%{release} Provides: uboot-snow = %{version}-%{release} Obsoletes: uboot-snowball < %{version}-%{release} Provides: uboot-snowball = %{version}-%{release} Obsoletes: uboot-trimslice < %{version}-%{release} Provides: uboot-trimslice = %{version}-%{release} Obsoletes: uboot-uevm < %{version}-%{release} Provides: uboot-uevm = %{version}-%{release} Obsoletes: uboot-wandboard_dl < %{version}-%{release} Provides: uboot-wandboard_dl = %{version}-%{release} Obsoletes: uboot-wandboard_quad < %{version}-%{release} Provides: uboot-wandboard_quad = %{version}-%{release} Obsoletes: uboot-wandboard_solo < %{version}-%{release} Provides: uboot-wandboard_solo = %{version}-%{release} %description -n uboot-images-armv7 u-boot bootloader binaries for armv7 boards %endif %prep %setup -q -n u-boot-%{version}%{?candidate:-%{candidate}} git init git config user.email "noone@example.com" git config user.name "no one" git add . git commit -a -q -m "%{version} baseline" git am %{patches} fedora.bmp #replace the logos with fedora's for bmp in tools/logos/*bmp do cp fedora.bmp $bmp done %build %ifarch aarch64 make vexpress_aemv8a_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot.bin builds/u-boot.bin.vexpress_aemv8a make mrproper %endif %ifarch %{arm} # AllWinner devices make Bananapi_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-sunxi-with-spl.bin builds/u-boot-sunxi-with-spl.bin.Bananapi make mrproper make Cubieboard_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-sunxi-with-spl.bin builds/u-boot-sunxi-with-spl.bin.Cubieboard make mrproper make Cubieboard2_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-sunxi-with-spl.bin builds/u-boot-sunxi-with-spl.bin.Cubieboard2 make mrproper make Cubietruck_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-sunxi-with-spl.bin builds/u-boot-sunxi-with-spl.bin.Cubietruck make mrproper make Mele_A1000G_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-sunxi-with-spl.bin builds/u-boot-sunxi-with-spl.bin.Mele_A1000G make mrproper make Mele_A1000_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-sunxi-with-spl.bin builds/u-boot-sunxi-with-spl.bin.Mele_A1000 make mrproper make Mini-X_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-sunxi-with-spl.bin builds/u-boot-sunxi-with-spl.bin.Mini-X make mrproper make Mini-X-1Gb_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-sunxi-with-spl.bin builds/u-boot-sunxi-with-spl.bin.Mini-X-1Gb make mrproper make A10-OLinuXino-Lime_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-sunxi-with-spl.bin builds/u-boot-sunxi-with-spl.bin.A10-OLinuXino-Lime make mrproper make A10s-OLinuXino-M_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-sunxi-with-spl.bin builds/u-boot-sunxi-with-spl.bin.A10s-OLinuXino-M make mrproper make A13-OLinuXino_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-sunxi-with-spl.bin builds/u-boot-sunxi-with-spl.bin.A13-OLinuXino make mrproper make A13-OLinuXinoM_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-sunxi-with-spl.bin builds/u-boot-sunxi-with-spl.bin.A13-OLinuXinoM make mrproper make A20-OLinuXino_MICRO_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-sunxi-with-spl.bin builds/u-boot-sunxi-with-spl.bin.A20-OLinuXino_MICRO make mrproper # Calxeda make highbank_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot.bin builds/u-boot.bin.highbank make mrproper # Freescale i.MX6 make cm_fx6_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot.img builds/u-boot.img.cm_fx6 cp -p SPL builds/SPL.cm_fx6 make mrproper make riotboard_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot.imx builds/u-boot.imx.riotboard make mrproper make udoo_quad_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot.imx builds/u-boot.imx.udoo_quad make mrproper make wandboard_dl_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot.imx builds/u-boot.imx.wandboard_dl make mrproper make wandboard_quad_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot.imx builds/u-boot.imx.wandboard_quad make mrproper make wandboard_solo_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot.imx builds/u-boot.imx.wandboard_solo make mrproper # NVidia Tegra devices make jetson-tk1_defconfig make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-dtb-tegra.bin builds/u-boot-dtb-tegra.bin.jetson-tk1 cp -p u-boot-nodtb-tegra.bin builds/u-boot-nodtb-tegra.bin.jetson-tk1 cp -p u-boot.map builds/u-boot.map.jetson-tk1 cp -p u-boot.dtb builds/u-boot.dtb.jetson-tk1 make mrproper make paz00_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-dtb-tegra.bin builds/u-boot-dtb-tegra.bin.paz00 cp -p u-boot-nodtb-tegra.bin builds/u-boot-nodtb-tegra.bin.paz00 cp -p u-boot.map builds/u-boot.map.paz00 cp -p u-boot.dtb builds/u-boot.dtb.paz00 make mrproper make trimslice_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-dtb-tegra.bin builds/u-boot-dtb-tegra.bin.trimslice cp -p u-boot-nodtb-tegra.bin builds/u-boot-nodtb-tegra.bin.trimslice cp -p u-boot.map builds/u-boot.map.trimslice cp -p u-boot.dtb builds/u-boot.dtb.trimslice make mrproper # Samsung Exynos devices make arndale_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p spl/arndale-spl.bin builds/arndale-spl.bin.arndale cp -p u-boot-dtb.bin builds/u-boot-dtb.bin.arndale make mrproper make origen_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p spl/origen-spl.bin builds/origen-spl.bin.origen cp -p u-boot.bin builds/u-boot.bin.origen cp -p u-boot-dtb.bin builds/u-boot-dtb.bin.origen make mrproper make smdkv310_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p spl/smdkv310-spl.bin builds/smdkv310-spl.bin.smdkv310 cp -p u-boot.bin builds/u-boot.bin.smdkv310 make mrproper make snow_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot-dtb.bin builds/u-boot-dtb.bin.snow make mrproper # ST Erikson make snowball_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p u-boot.bin builds/u-boot.bin.snowball make mrproper # TI devices make am335x_boneblack_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p MLO builds/MLO.beaglebone cp -p u-boot.img builds/u-boot.img.beaglebone make mrproper make omap3_beagle_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p MLO builds/MLO.beagle cp -p u-boot.img builds/u-boot.img.beagle make mrproper make omap4_panda_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p MLO builds/MLO.panda cp -p u-boot.img builds/u-boot.img.panda make mrproper make omap5_uevm_config make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 cp -p MLO builds/MLO.uevm cp -p u-boot.img builds/u-boot.img.uevm make mrproper %endif make HOSTCC="gcc $RPM_OPT_FLAGS" %{?_smp_mflags} CROSS_COMPILE="" defconfig V=1 make HOSTCC="gcc $RPM_OPT_FLAGS" %{?_smp_mflags} CROSS_COMPILE="" silentoldconfig V=1 make HOSTCC="gcc $RPM_OPT_FLAGS" %{?_smp_mflags} CROSS_COMPILE="" tools-only V=1 %ifarch %{arm} make HOSTCC="gcc $RPM_OPT_FLAGS" %{?_smp_mflags} CROSS_COMPILE="" sheevaplug_config V=1 make HOSTCC="gcc $RPM_OPT_FLAGS" %{?_smp_mflags} CROSS_COMPILE="" env V=1 %endif %install mkdir -p $RPM_BUILD_ROOT%{_bindir} mkdir -p $RPM_BUILD_ROOT%{_sysconfdir} mkdir -p $RPM_BUILD_ROOT%{_mandir}/man1 %ifarch aarch64 mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/vexpress_aemv8a/ install -p -m 0644 builds/u-boot.bin.vexpress_aemv8a $RPM_BUILD_ROOT%{_datadir}/uboot/vexpress_aemv8a/u-boot.bin %endif %ifarch %{arm} mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/ for board in A10-OLinuXino-Lime A10s-OLinuXino-M A13-OLinuXino A13-OLinuXinoM A20-OLinuXino_MICRO arndale Bananapi beagle beaglebone cm_fx6 Cubieboard Cubieboard2 Cubietruck highbank jetson-tk1 Mele_A1000 Mele_A1000G Mini-X Mini-X-1Gb origen panda paz00 riotboard smdkv310 snow snowball trimslice udoo_quad uevm vexpress wandboard_dl wandboard_quad wandboard_solo do mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/ done # AllWinner for board in Bananapi Cubieboard Cubieboard2 Cubietruck Mele_A1000 Mele_A1000G Mini-X Mini-X-1Gb A10-OLinuXino-Lime A10s-OLinuXino-M A13-OLinuXino A13-OLinuXinoM A20-OLinuXino_MICRO do mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/ install -p -m 0644 builds/u-boot-sunxi-with-spl.bin.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot-sunxi-with-spl.bin done # Calxeda install -p -m 0644 builds/u-boot.bin.highbank $RPM_BUILD_ROOT%{_datadir}/uboot/highbank/u-boot.bin # FreeScale for board in cm_fx6 do install -p -m 0644 builds/u-boot.img.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.img install -p -m 0644 builds/SPL.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/SPL done for board in riotboard udoo_quad wandboard_dl wandboard_quad wandboard_solo do mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/ install -p -m 0644 builds/u-boot.imx.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.imx done # NVidia for board in paz00 trimslice jetson-tk1 do mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/ install -p -m 0644 builds/u-boot-nodtb-tegra.bin.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot-nodtb-tegra.bin install -p -m 0644 builds/u-boot-dtb-tegra.bin.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot-dtb-tegra.bin install -p -m 0644 builds/u-boot.map.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.map install -p -m 0644 builds/u-boot.dtb.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.dtb done # Samsung #without dtb for board in smdkv310 do mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/ install -p -m 0644 builds/$(echo $board)-spl.bin.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/$(echo $board)-spl.bin install -p -m 0644 builds/u-boot.bin.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.bin done #with dtb for board in arndale origen do mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/ install -p -m 0644 builds/$(echo $board)-spl.bin.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/$(echo $board)-spl.bin install -p -m 0644 builds/u-boot-dtb.bin.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot-dtb.bin done install -p -m 0644 builds/u-boot-dtb.bin.snow $RPM_BUILD_ROOT%{_datadir}/uboot/snow/u-boot-dtb.bin # STE install -p -m 0644 builds/u-boot.bin.snowball $RPM_BUILD_ROOT%{_datadir}/uboot/snowball/u-boot.bin # TI for board in beaglebone beagle panda uevm do mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/ install -p -m 0644 builds/u-boot.img.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.img install -p -m 0644 builds/MLO.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/MLO done %endif install -p -m 0755 tools/mkimage $RPM_BUILD_ROOT%{_bindir} install -p -m 0644 doc/mkimage.1 $RPM_BUILD_ROOT%{_mandir}/man1 install -p -m 0755 tools/mkenvimage $RPM_BUILD_ROOT%{_bindir} install -p -m 0755 tools/dumpimage $RPM_BUILD_ROOT%{_bindir} install -p -m 0755 tools/fit_info $RPM_BUILD_ROOT%{_bindir} install -p -m 0755 tools/fit_check_sign $RPM_BUILD_ROOT%{_bindir} %ifarch %{arm} install -p -m 0755 tools/env/fw_printenv $RPM_BUILD_ROOT%{_bindir} ( cd $RPM_BUILD_ROOT%{_bindir}; ln -sf fw_printenv fw_setenv ) install -p -m 0644 tools/env/fw_env.config $RPM_BUILD_ROOT%{_sysconfdir} %endif %files %doc README doc/README.imximage doc/README.kwbimage doc/uImage.FIT %{_bindir}/fit_check_sign %{_bindir}/fit_info %{_bindir}/mkimage %{_bindir}/mkenvimage %{_bindir}/dumpimage %{_mandir}/man1/mkimage.1* %ifarch %{arm} aarch64 %dir %{_datadir}/uboot/ %endif %ifarch %{arm} %{_bindir}/fw_printenv %{_bindir}/fw_setenv %config(noreplace) %{_sysconfdir}/fw_env.config %endif %ifarch aarch64 %files -n uboot-images-armv8 %{_datadir}/uboot/vexpress_aemv8a/ %endif %ifarch %{arm} %files -n uboot-images-armv7 # AllWinner %{_datadir}/uboot/Bananapi/ %{_datadir}/uboot/Cubieboard/ %{_datadir}/uboot/Cubieboard2/ %{_datadir}/uboot/Cubietruck/ %{_datadir}/uboot/Mele_A1000/ %{_datadir}/uboot/Mele_A1000G/ %{_datadir}/uboot/Mini-X/ %{_datadir}/uboot/Mini-X-1Gb/ %{_datadir}/uboot/A10-OLinuXino-Lime/ %{_datadir}/uboot/A10s-OLinuXino-M/ %{_datadir}/uboot/A13-OLinuXino/ %{_datadir}/uboot/A13-OLinuXinoM/ %{_datadir}/uboot/A20-OLinuXino_MICRO/ # Calxeda %{_datadir}/uboot/highbank/ # FreeScale %{_datadir}/uboot/cm_fx6/ %{_datadir}/uboot/riotboard/ %{_datadir}/uboot/wandboard_dl/ %{_datadir}/uboot/wandboard_quad/ %{_datadir}/uboot/wandboard_solo/ %{_datadir}/uboot/udoo_quad/ # NVidia %{_datadir}/uboot/jetson-tk1/ %{_datadir}/uboot/paz00/ %{_datadir}/uboot/trimslice/ # Samsung %{_datadir}/uboot/arndale/ %{_datadir}/uboot/smdkv310/ %{_datadir}/uboot/snow/ # STE %{_datadir}/uboot/snowball/ # TI %{_datadir}/uboot/beagle/ %{_datadir}/uboot/beaglebone/ %{_datadir}/uboot/origen/ %{_datadir}/uboot/panda/ %{_datadir}/uboot/uevm/ %endif %changelog * Wed Nov 26 2014 Dennis Gilmore - 2015.01-0.1.rc2 - update to 2015.01 rc2 * Tue Nov 11 2014 Dennis Gilmore - 2014.10-5 - switch the target used for beaglebone rhbz#1161619 * Mon Oct 27 2014 Dennis Gilmore - 2014.10-4 - port panda board to upstreamed geneic boot commands - append the console line automatically again * Fri Oct 24 2014 Dennis Gilmore - 2014.10-3 - scan both the first and second partitions for boot configs on beaglebone * Thu Oct 16 2014 Peter Robinson 2014.10-2 - Add upstream patch to fix Tegra Jetson K1 pci-e (for network) * Wed Oct 15 2014 Dennis Gilmore - 2014.10-1 - update to 2014.10 final release * Tue Oct 14 2014 Dennis Gilmore - 2014.10-0.7.rc3 - refacter making directories for images - make cm_fx6 image for utilite * Wed Oct 8 2014 Peter Robinson 2014.10-0.6.rc3 - Update to 2014.10 rc3 - Add proposed distro patches from Debian - Add BBone with distro support * Fri Oct 3 2014 Peter Robinson 2014.10-0.5.rc2 - Enable some more AllWinner devices * Mon Sep 29 2014 Peter Robinson 2014.10-0.4.rc2 - Add generic distro support to RIoT board - Add patch to stabilise BananaPi network - Spec cleanups * Fri Sep 19 2014 Peter Robinson 2014.10-0.3.rc2 - Add Jetson K1, RIoT Board - Minor spec cleanups - use git to apply patches * Thu Sep 18 2014 Dennis Gilmore - 2014.10-0.2.rc2 - Add Cubieboard, Cubieboard2, Banana Pi, Mele_A1000 and Mele_A1000G images * Thu Sep 18 2014 Dennis Gilmore - 2014.10-0.1.rc2 - Update to 2014.10-rc2 * Mon Aug 18 2014 Fedora Release Engineering - 2014.04-7 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild * Sun Jun 08 2014 Fedora Release Engineering - 2014.04-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild * Sun Apr 27 2014 Dennis Gilmore - 2014.04-5 - fix up aarch64 image package naming - drop need for cross compiler to build tools * Sat Apr 26 2014 Dennis Gilmore - 2014.04-4 - add hyp support to cubietruck image - enables kvm support * Thu Apr 24 2014 Dennis Gilmore - 2014.04-3 - add cubietruck u-boot image * Wed Apr 23 2014 Dennis Gilmore - 2014.04-2 - automatically add console line from u-boot environment to bootargs - when there is no console argument in the extlinux.conf file * Mon Apr 21 2014 Dennis Gilmore - 2014.04-1 - update to final 2014.04 - put all images into a single rpm - add udoo image * Wed Mar 19 2014 Dennis Gilmore - 2014.04-0.4.rc2 - apply fixes for panda and beaglebone * Sat Mar 15 2014 Dennis Gilmore - 2014.04-0.3.rc2 - Add missing header - pull in patches on their way upstream to fix some issues with ti - systems. - refactor beaglebone and pandaboard patches * Thu Mar 13 2014 Dennis Gilmore - 2014.04-0.2.rc2 - actually apply patches * Wed Mar 12 2014 Dennis Gilmore - 2014.04-0.1.rc2 - update to 2014.04-rc2 - add patches to convert some boards to generic distro configs * Sun Oct 20 2013 Dennis Gilmore - 2013.10-3 - fix ftbfs for wandboard - use _smp_mflags * Sat Oct 19 2013 Dennis Gilmore - 2013.10-2 - use ext2load for dtb loading - cleanup duplicate defines * Thu Oct 17 2013 Dennis Gilmore - 2013.10-1 - update to 2013.10 final - refactor where u-boot binaries are stored * Fri Oct 04 2013 Dennis Gilmore - 2013.10-0.5.rc4 - update to 2013.10-rc4 * Fri Sep 20 2013 Dennis Gilmore - 2013.10-0.4.rc3 - install u-boot.map for trimslice and paz00 * Fri Sep 20 2013 Dennis Gilmore - 2013.10-0.3.rc3 - install trimslice u-boot correctly * Fri Sep 20 2013 Dennis Gilmore - 2013.10-0.2.rc3 - enable arndale, paz00, snow, snowball and trimslice builds * Thu Sep 19 2013 Dennis Gilmore - 2013.10-0.1.rc3 - update to 2013.10-rc3 - disable panda timing patch for now * Mon Sep 02 2013 Dennis Gilmore - 2013.10-0.1.rc2 - update to 2013.10-rc2 - enable extlinux.conf support on most boards - add distro generic configuration options * Sun Sep 1 2013 Peter Robinson 2013.07-2 - Add patch for Panda ES memory type issue * Fri Jul 26 2013 Dennis Gilmore - 2013.07-1 - update to 2013.07 final * Thu Jul 18 2013 Dennis Gilmore - 2013.07-0.2.rc3 - update to 2013.07 rc3 - set wandboard to use extlinux.conf by default * Thu Jul 04 2013 Dennis Gilmore - 2013.07-0.1.rc2 - update beaglebone patches - update wandboard quad patch - upstream 2013.07-rc2 update * Wed Jun 05 2013 Dennis Gilmore - 2013.04-5 - add patches to support ext filesystems in exynos and omap SPL's - drop bringing in arm-boot-config on arm systems - build a highbank u-boot (intention is to use in qemu) - add wandboard quad u-boot * Wed May 22 2013 Dennis Gilmore - 2013.04-4 - build vexpress image - add uEnv.txt files for various supported omap systems * Sat May 18 2013 Dennis Gilmore - 2013.04-3 - add uevm, the omap5 based pandaboard - Require arm-boot-config on arm arches * Mon May 13 2013 Peter Robinson 2013.04-2 - Add patches for initial support for the Beagle Bone Black * Sun Apr 21 2013 Peter Robinson 2013.04-1 - Update to 2013.04 release - Build i.MX6 Wandboard Dual Lite and Solo Boards * Sun Mar 31 2013 Dennis Gilmore - 2013.04-0.1.rc1 - update to 2013.04-rc2 * Fri Mar 01 2013 Dennis Gilmore - 2013.01.01-1 - update to 2013.01.01 for bug#907139 * Thu Jan 24 2013 Dennis Gilmore - 2013.01-1 - update to 2013.01 release * Wed Oct 17 2012 Dennis Gilmore - 2012.10-1 - update to final 2012.10 release * Thu Oct 11 2012 Mauro Carvalho Chehab - Also generate uboot for SMDK310 * Tue Oct 09 2012 Dennis Gilmore - 2012.10-0.1.rc3 - update to 2010.10 rc3 * Fri Aug 24 2012 Dennis Gilmore - 2012.01-1 - update to 2012.07 release * Sun Jul 22 2012 Fedora Release Engineering - 2012.07-0.2.rc1 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild * Thu Jul 12 2012 Dennis Gilmore - 2012.07-0.1.rc1 - update to rc1 of 2012.07 release * Sat Jul 07 2012 Dennis Gilmore - 2012.04.01-4 - still build the beagleboard image * Sat Jul 07 2012 Dennis Gilmore - 2012.04.01-3 - build beaglebone uboot images * Mon Jun 25 2012 Dennis Gilmore - 2012.04.01-2 - add patch so the MLO detects fat16 partitions correctly * Mon May 07 2012 Dennis Gilmore - 2012.04.01-1 - update to 2012.04.01 release - http://lists.denx.de/pipermail/u-boot/2012-April/123011.html * Tue Apr 24 2012 Dennis Gilmore - 2012.04-1 - update to final 2012.04 release * Thu Apr 19 2012 Dennis Gilmore - 2012.04-0.1.rc3 - update to 2012.04-rc3 - build uboot binaries for beagle, panda and origen boards * Thu Mar 08 2012 Dennis Gilmore - 2011.12-1 - update to 2011.12 release * Sat Jan 14 2012 Fedora Release Engineering - 2011.03-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild * Thu Apr 14 2011 Dan Horák - 2011.03-1 - updated to to 2011.03 - build the tool for manipulation with environment only on arm * Mon Feb 07 2011 Fedora Release Engineering - 2010.03-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild * Thu May 27 2010 Dan Horák 2010.03-1 - updated to to 2010.03 - applied review feedback - added docs and expanded description - pass proper CFLAGS to the compiler * Sat Nov 14 2009 Dan Horák 2009.08-1 - initial Fedora version