From 004af623388022d258cbc29c0b71d8e22cd96c52 Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Sat, 31 Dec 2022 09:20:34 +0000 Subject: [PATCH v2 0/2] Initial support for Pinephone Pro This adds initial support for the PINE64 Pinephone Pro. It's a rebase to upstream core rk3399 DT pieces, and the addition of the upstream PPP DT from 6.2-rc1 and the U-Boot pieces are based on my work on the Pinebook Pro. Changes v2: - Drop the rk3399.dtsi sync for time being, causing issues around clock/dram - Sync the Pinephone DT to 6.2-rc1 - Update for the CONFIG_SYS_TEXT_BASE -> CONFIG_TEXT_BASE change - usb: ohci: Use a flexible array member for portstatus - Rename CONFIG_DM_VIDEO to CONFIG_VIDEO - Enable DM_REGULATOR_FAN53555 - Don't initialize i2c before relocation Peter Robinson (2): arm64: dts: rk3399: Add upstream Pinephone Pro dts rockchip: Add initial support for the PINE64 Pinephone Pro arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi | 31 ++ arch/arm/dts/rk3399-pinephone-pro.dts | 474 ++++++++++++++++++ arch/arm/mach-rockchip/rk3399/Kconfig | 8 + board/pine64/pinephone-pro-rk3399/Kconfig | 15 + board/pine64/pinephone-pro-rk3399/MAINTAINERS | 8 + board/pine64/pinephone-pro-rk3399/Makefile | 1 + .../pinephone-pro-rk3399.c | 76 +++ configs/pinephone-pro-rk3399_defconfig | 104 ++++ include/configs/pinephone-pro-rk3399.h | 19 + 10 files changed, 737 insertions(+) create mode 100644 arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi create mode 100644 arch/arm/dts/rk3399-pinephone-pro.dts create mode 100644 board/pine64/pinephone-pro-rk3399/Kconfig create mode 100644 board/pine64/pinephone-pro-rk3399/MAINTAINERS create mode 100644 board/pine64/pinephone-pro-rk3399/Makefile create mode 100644 board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c create mode 100644 configs/pinephone-pro-rk3399_defconfig create mode 100644 include/configs/pinephone-pro-rk3399.h -- 2.39.0 From 9976caacb35316cbe047ded58855d2ca1a54243b Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Sat, 31 Dec 2022 09:18:44 +0000 Subject: [PATCH v2 1/2] arm64: dts: rk3399: Add upstream Pinephone Pro dts Initial support for the PinePhone Pro has now landed upstream in Linux 6.1 RC1 so sync the dts from 6.2-rc1 for initial support. Signed-off-by: Peter Robinson --- arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3399-pinephone-pro.dts | 474 ++++++++++++++++++++++++++ 2 files changed, 475 insertions(+) create mode 100644 arch/arm/dts/rk3399-pinephone-pro.dts diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 43951a7731e..8c1eec1025f 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -153,6 +153,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ rk3399-nanopi-r4s.dtb \ rk3399-orangepi.dtb \ rk3399-pinebook-pro.dtb \ + rk3399-pinephone-pro.dtb \ rk3399-puma-haikou.dtb \ rk3399-roc-pc.dtb \ rk3399-roc-pc-mezzanine.dtb \ diff --git a/arch/arm/dts/rk3399-pinephone-pro.dts b/arch/arm/dts/rk3399-pinephone-pro.dts new file mode 100644 index 00000000000..04403a76238 --- /dev/null +++ b/arch/arm/dts/rk3399-pinephone-pro.dts @@ -0,0 +1,474 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Martijn Braam + * Copyright (c) 2021 Kamil Trzciński + */ + +/* + * PinePhone Pro datasheet: + * https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf + */ + +/dts-v1/; +#include +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Pine64 PinePhonePro"; + compatible = "pine64,pinephone-pro", "rockchip,rk3399"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn_pin>; + + key-power { + debounce-interval = <20>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "Power"; + linux,code = ; + wakeup-source; + }; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + }; + + vcca1v8_s3: vcc1v8-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcca1v8_s3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vcc1v8_codec: vcc1v8-codec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc1v8_codec_en>; + regulator-name = "vcc1v8_codec"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + + wifi_pwrseq: sdio-wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk818 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h_pin>; + /* + * Wait between power-on and SDIO access for CYP43455 + * POR circuit. + */ + post-power-on-delay-ms = <110>; + /* + * Wait between consecutive toggles for CYP43455 CBUCK + * regulator discharge. + */ + power-off-delay-us = <10000>; + + /* WL_REG_ON on module */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk818: pmic@1c { + compatible = "rockchip,rk818"; + reg = <0x1c>; + interrupt-parent = <&gpio1>; + interrupts = ; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_cpu_l: DCDC_REG1 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <975000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_center: DCDC_REG2 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcca3v0_codec: LDO_REG1 { + regulator-name = "vcca3v0_codec"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + vcc3v0_touch: LDO_REG2 { + regulator-name = "vcc3v0_touch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + vcca1v8_codec: LDO_REG3 { + regulator-name = "vcca1v8_codec"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + rk818_pwr_on: LDO_REG4 { + regulator-name = "rk818_pwr_on"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v0: LDO_REG5 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG7 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc3v3_s3: LDO_REG8 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG9 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vcc3v3_s0: SWITCH_REG { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_pin>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_pin>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <975000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&cluster0_opp { + opp04 { + status = "disabled"; + }; + + opp05 { + status = "disabled"; + }; +}; + +&cluster1_opp { + opp06 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1100000 1100000 1150000>; + }; + + opp07 { + status = "disabled"; + }; +}; + +&io_domains { + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcca1v8_codec>; + sdmmc-supply = <&vccio_sd>; + gpio1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwrbtn_pin: pwrbtn-pin { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_pin: vsel1-pin { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_pin: vsel2-pin { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h_pin: wifi-enable-h-pin { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + vcc1v8_codec_en: vcc1v8-codec-en { + rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wireless-bluetooth { + bt_wake_pin: bt-wake-pin { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_pin: bt-host-wake-pin { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reset_pin: bt-reset-pin { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk818 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; -- 2.39.0 From 004af623388022d258cbc29c0b71d8e22cd96c52 Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Wed, 28 Dec 2022 03:52:27 +0000 Subject: [PATCH v2 2/2] rockchip: Add initial support for the PINE64 Pinephone Pro The Pinephone Pro is another device by PINE64. It's closely related to the Pinebook Pro of which this initial support is derived from. Specification: - A variant of the Rockchip RK3399 - A 6 inch 720*1440 DSI display - Front and rear cameras - Type-C interface with alt mode display (DP 1.2) and PD charging - 4GB LPDDR4 RAM - 128GB eMMC - mSD card slot - An AP6255 module for 802.11ac WiFi and Bluetooth 5 - Quectel EG25-G 4G/LTE modem Signed-off-by: Peter Robinson --- arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi | 31 ++++++ arch/arm/mach-rockchip/rk3399/Kconfig | 8 ++ board/pine64/pinephone-pro-rk3399/Kconfig | 15 +++ board/pine64/pinephone-pro-rk3399/MAINTAINERS | 8 ++ board/pine64/pinephone-pro-rk3399/Makefile | 1 + .../pinephone-pro-rk3399.c | 76 +++++++++++++ configs/pinephone-pro-rk3399_defconfig | 104 ++++++++++++++++++ include/configs/pinephone-pro-rk3399.h | 19 ++++ 8 files changed, 262 insertions(+) create mode 100644 arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi create mode 100644 board/pine64/pinephone-pro-rk3399/Kconfig create mode 100644 board/pine64/pinephone-pro-rk3399/MAINTAINERS create mode 100644 board/pine64/pinephone-pro-rk3399/Makefile create mode 100644 board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c create mode 100644 configs/pinephone-pro-rk3399_defconfig create mode 100644 include/configs/pinephone-pro-rk3399.h diff --git a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi new file mode 100644 index 00000000000..1dad283ad05 --- /dev/null +++ b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2022 Peter Robinson + */ + +#include "rk3399-u-boot.dtsi" +#include "rk3399-sdram-lpddr4-100.dtsi" + +/ { + chosen { + u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc; + }; + + config { + u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */ + }; +}; + +&rng { + status = "okay"; +}; + +&sdhci { + max-frequency = <25000000>; + u-boot,dm-pre-reloc; +}; + +&sdmmc { + max-frequency = <20000000>; + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig index b48feeb3466..d01063ac98b 100644 --- a/arch/arm/mach-rockchip/rk3399/Kconfig +++ b/arch/arm/mach-rockchip/rk3399/Kconfig @@ -39,6 +39,13 @@ config TARGET_PINEBOOK_PRO_RK3399 with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port, 1920*1080 screen and all the usual laptop features. +config TARGET_PINEPHONE_PRO_RK3399 + bool "PinePhone Pro" + help + PinePhone Pro is a phone based on a variant of the Rockchip + rk3399 SoC with 4Gb RAM, onboard eMMC, USB-C, headphone jack, + 720x1440 screen and a Quectel 4G/LTE modem. + config TARGET_PUMA_RK3399 bool "Theobroma Systems RK3399-Q7 (Puma)" help @@ -165,6 +172,7 @@ endif # BOOTCOUNT_LIMIT source "board/firefly/roc-pc-rk3399/Kconfig" source "board/google/gru/Kconfig" source "board/pine64/pinebook-pro-rk3399/Kconfig" +source "board/pine64/pinephone-pro-rk3399/Kconfig" source "board/pine64/rockpro64_rk3399/Kconfig" source "board/rockchip/evb_rk3399/Kconfig" source "board/theobroma-systems/puma_rk3399/Kconfig" diff --git a/board/pine64/pinephone-pro-rk3399/Kconfig b/board/pine64/pinephone-pro-rk3399/Kconfig new file mode 100644 index 00000000000..13d6465ae6e --- /dev/null +++ b/board/pine64/pinephone-pro-rk3399/Kconfig @@ -0,0 +1,15 @@ +if TARGET_PINEPHONE_PRO_RK3399 + +config SYS_BOARD + default "pinephone-pro-rk3399" + +config SYS_VENDOR + default "pine64" + +config SYS_CONFIG_NAME + default "pinephone-pro-rk3399" + +config BOARD_SPECIFIC_OPTIONS + def_bool y + +endif diff --git a/board/pine64/pinephone-pro-rk3399/MAINTAINERS b/board/pine64/pinephone-pro-rk3399/MAINTAINERS new file mode 100644 index 00000000000..c923ff1be32 --- /dev/null +++ b/board/pine64/pinephone-pro-rk3399/MAINTAINERS @@ -0,0 +1,8 @@ +PINEPHONE_PRO +M: Peter Robinson +S: Maintained +F: board/pine64/rk3399-pinephone-pro/ +F: include/configs/rk3399-pinephone-pro.h +F: arch/arm/dts/rk3399-pinephone-pro.dts +F: arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi +F: configs/pinephone-pro-rk3399_defconfig diff --git a/board/pine64/pinephone-pro-rk3399/Makefile b/board/pine64/pinephone-pro-rk3399/Makefile new file mode 100644 index 00000000000..8d9203053e5 --- /dev/null +++ b/board/pine64/pinephone-pro-rk3399/Makefile @@ -0,0 +1 @@ +obj-y += pinephone-pro-rk3399.o diff --git a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c new file mode 100644 index 00000000000..eb639cd0d07 --- /dev/null +++ b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * (C) Copyright 2022 Peter Robinson + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define GRF_IO_VSEL_BT565_SHIFT 0 +#define PMUGRF_CON0_VSEL_SHIFT 8 + +#ifndef CONFIG_SPL_BUILD +int board_early_init_f(void) +{ + struct udevice *regulator; + int ret; + + ret = regulator_get_by_platname("vcc5v0_usb", ®ulator); + if (ret) { + pr_debug("%s vcc5v0_usb init fail! ret %d\n", __func__, ret); + goto out; + } + + ret = regulator_set_enable(regulator, true); + if (ret) + pr_debug("%s vcc5v0-host-en-gpio set fail! ret %d\n", __func__, ret); + +out: + return 0; +} +#endif + +#ifdef CONFIG_MISC_INIT_R +static void setup_iodomain(void) +{ + struct rk3399_grf_regs *grf = + syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + struct rk3399_pmugrf_regs *pmugrf = + syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); + + /* BT565 is in 1.8v domain */ + rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT); + + /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */ + rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT); +} + +int misc_init_r(void) +{ + const u32 cpuid_offset = 0x7; + const u32 cpuid_length = 0x10; + u8 cpuid[cpuid_length]; + int ret; + + setup_iodomain(); + + ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid); + if (ret) + return ret; + + ret = rockchip_cpuid_set(cpuid, cpuid_length); + if (ret) + return ret; + + return ret; +} +#endif diff --git a/configs/pinephone-pro-rk3399_defconfig b/configs/pinephone-pro-rk3399_defconfig new file mode 100644 index 00000000000..eb979f6c051 --- /dev/null +++ b/configs/pinephone-pro-rk3399_defconfig @@ -0,0 +1,104 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_TEXT_BASE=0x00200000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x8000 +CONFIG_ENV_OFFSET=0x3F8000 +CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinephone-pro" +CONFIG_ROCKCHIP_RK3399=y +CONFIG_TARGET_PINEPHONE_PRO_RK3399=y +CONFIG_DEBUG_UART_BASE=0xFF1A0000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y +CONFIG_SYS_LOAD_ADDR=0x800800 +CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 +CONFIG_BOOTDELAY=3 +CONFIG_USE_PREBOOT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinephone-pro.dtb" +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_SPL_SPI_LOAD=y +CONFIG_TPL=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TIME=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_DM_KEYBOARD=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_ROCKCHIP_EFUSE=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SF_DEFAULT_SPEED=20000000 +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_TYPEC=y +CONFIG_DM_PMIC_FAN53555=y +CONFIG_DM_REGULATOR_FAN53555=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM_RK3399_LPDDR4=y +CONFIG_DM_RESET=y +CONFIG_DM_RNG=y +CONFIG_RNG_ROCKCHIP=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_ROCKCHIP_SPI=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_KEYBOARD=y +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_DISPLAY=y +CONFIG_VIDEO=y +CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_EDP=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_ERRNO_STR=y diff --git a/include/configs/pinephone-pro-rk3399.h b/include/configs/pinephone-pro-rk3399.h new file mode 100644 index 00000000000..78017d6bcc3 --- /dev/null +++ b/include/configs/pinephone-pro-rk3399.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2016 Rockchip Electronics Co., Ltd + * Copyright (C) 2022 Peter Robinson + */ + +#ifndef __PINEPHONE_PRO_RK3399_H +#define __PINEPHONE_PRO_RK3399_H + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdin=serial,usbkbd\0" \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#include + +#define SDRAM_BANK_SIZE (2UL << 30) + +#endif -- 2.39.0