From 9b10863bc8b14ca5463a95dd2c77555cfc68f326 Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Wed, 9 Sep 2020 10:59:31 +0100 Subject: [PATCH] Initial PineTab dts from linux 5.7-rc1 Signed-off-by: Peter Robinson --- arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-a64-pinetab.dts | 460 ++++++++++++++++++++++++++++ 2 files changed, 461 insertions(+) create mode 100644 arch/arm/dts/sun50i-a64-pinetab.dts diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 193f5c6138..57ef94450a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -611,6 +611,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-pinephone-1.0.dtb \ sun50i-a64-pinephone-1.1.dtb \ sun50i-a64-pinephone-1.2.dtb \ + sun50i-a64-pinetab.dtb \ sun50i-a64-sopine-baseboard.dtb \ sun50i-a64-teres-i.dtb dtb-$(CONFIG_MACH_SUN9I) += \ diff --git a/arch/arm/dts/sun50i-a64-pinetab.dts b/arch/arm/dts/sun50i-a64-pinetab.dts new file mode 100644 index 0000000000..316e8a4439 --- /dev/null +++ b/arch/arm/dts/sun50i-a64-pinetab.dts @@ -0,0 +1,460 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Icenowy Zheng + * + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" + +#include +#include +#include + +/ { + model = "PineTab"; + compatible = "pine64,pinetab", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + ethernet0 = &rtl8723cs; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>; + default-brightness-level = <15>; + enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ + power-supply = <&vdd_bl>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + i2c-csi { + compatible = "i2c-gpio"; + sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */ + scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */ + i2c-gpio,delay-us = <5>; + #address-cells = <1>; + #size-cells = <0>; + + /* Rear camera */ + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_mclk_pin>; + clocks = <&ccu CLK_CSI_MCLK>; + clock-names = "xclk"; + + AVDD-supply = <®_dldo3>; + DOVDD-supply = <®_aldo1>; + DVDD-supply = <®_eldo3>; + reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */ + powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */ + + port { + ov5640_ep: endpoint { + remote-endpoint = <&csi_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; + }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + sound-name-prefix = "Speaker Amp"; + }; + + vdd_bl: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "bl-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + enable-active-high; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + post-power-on-delay-ms = <200>; + }; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + hpvcc-supply = <®_eldo1>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + +&csi { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + csi_ep: endpoint { + remote-endpoint = <&ov5640_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; + +&dai { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&dphy { + status = "okay"; +}; + +&dsi { + vcc-dsi-supply = <®_dldo1>; + status = "okay"; + + panel@0 { + compatible = "feixin,k101-im2ba02"; + reg = <0>; + avdd-supply = <®_dc1sw>; + dvdd-supply = <®_dc1sw>; + cvdd-supply = <®_ldo_io1>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + backlight = <&backlight>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt9271"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */ + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ + AVDD28-supply = <®_ldo_io1>; + }; +}; + +&i2c0_pins { + bias-pull-up; +}; + +&i2c1 { + status = "okay"; + + /* TODO: add Bochs BMA223 accelerometer here */ +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button-200 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <200000>; + }; + + button-400 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <400000>; + }; +}; + +&mixer1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_dcdc1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dldo4>; + vqmmc-supply = <®_eldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723cs: wifi@1 { + reg = <1>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pwm { + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; + }; +}; + +#include "axp803.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +®_aldo1 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "dovdd-csi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi-dsi-sensor"; +}; + +®_dldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_eldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +®_eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca-1v8"; +}; + +®_eldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-1v8-csi"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_ldo_io0 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb"; + status = "okay"; +}; + +®_ldo_io1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <3500000>; + regulator-name = "vcc-touchscreen"; + status = "okay"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&sound { + status = "okay"; + simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; + simple-audio-card,widgets = "Microphone", "Internal Microphone Left", + "Microphone", "Internal Microphone Right", + "Headphone", "Headphone Jack", + "Speaker", "Internal Speaker"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "Speaker Amp INL", "LINEOUT", + "Speaker Amp INR", "LINEOUT", + "Internal Speaker", "Speaker Amp OUTL", + "Internal Speaker", "Speaker Amp OUTR", + "Headphone Jack", "HP", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Internal Microphone Left", "MBIAS", + "MIC1", "Internal Microphone Left", + "Internal Microphone Right", "HBIAS", + "MIC2", "Internal Microphone Right"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_ldo_io0>; + status = "okay"; +}; -- 2.26.2 From 6bf15552c2b6becb48ce7732120e0ddb2078cb1a Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Tue, 14 Apr 2020 09:53:07 +0100 Subject: [PATCH 9/9] initial pinetab support Signed-off-by: Peter Robinson --- configs/pinetab_defconfig | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 configs/pinetab_defconfig diff --git a/configs/pinetab_defconfig b/configs/pinetab_defconfig new file mode 100644 index 0000000000..5b9620f3e5 --- /dev/null +++ b/configs/pinetab_defconfig @@ -0,0 +1,26 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN50I=y +CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y +CONFIG_DRAM_CLK=552 +CONFIG_DRAM_ZQ=3881949 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_R_I2C_ENABLE=y +CONFIG_SPL_SPI_SUNXI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_USE_PREBOOT=y +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinetab" +CONFIG_OF_LIST="sun50i-a64-pinetab" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_PWM=y +CONFIG_PWM_SUNXI=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y -- 2.26.0