Add upstream ext4 patches to fix 64 bit feature issues with u-boot and /boot

0001-Fix-BeagleAI-detection.patch

@@ -1,29 +0,0 @@
-From 1849ef423238aeb1732eb3b8e67eb46bc21401c7 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Thu, 10 Sep 2020 14:24:12 +0100
-Subject: [PATCH] Fix BeagleAI detection
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- board/ti/am57xx/board.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
-index 7809875510..3232812a97 100644
---- a/board/ti/am57xx/board.c
-+++ b/board/ti/am57xx/board.c
-@@ -527,8 +527,10 @@ void do_board_detect(void)
- 
- 	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
- 				  CONFIG_EEPROM_CHIP_ADDRESS);
--	if (rc)
-+	if (rc) {
- 		printf("ti_i2c_eeprom_init failed %d\n", rc);
-+		ti_i2c_eeprom_am_set("BBONE-AI", "A");
-+	}
- 
- #ifdef CONFIG_SUPPORT_EMMC_BOOT
- 	rc = board_bootmode_has_emmc();
--- 
-2.26.2
-

0001-Fixes-for-AllWinner-ethernet-network-interfaces.patch

@@ -1,518 +0,0 @@
-From 25ce28126444900b7b3efef36c6b9d15a6ab9af1 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Wed, 28 Oct 2020 10:08:44 +0000
-Subject: [PATCH] Fixes for AllWinner ethernet network interfaces
-
-The upstream kernel in fixing stuff has broken stuff.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- arch/arm/dts/sun50i-a64-bananapi-m64.dts        | 2 +-
- arch/arm/dts/sun50i-a64-nanopi-a64.dts          | 2 +-
- arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts | 2 +-
- arch/arm/dts/sun50i-a64-olinuxino.dts           | 2 +-
- arch/arm/dts/sun50i-a64-orangepi-win.dts        | 2 +-
- arch/arm/dts/sun50i-a64-pine64-plus.dts         | 2 +-
- arch/arm/dts/sun50i-a64-sopine-baseboard.dts    | 2 +-
- arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts  | 2 +-
- arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts     | 2 +-
- arch/arm/dts/sun50i-h5-nanopi-neo2.dts          | 2 +-
- arch/arm/dts/sun50i-h5-orangepi-pc2.dts         | 2 +-
- arch/arm/dts/sun50i-h5-orangepi-prime.dts       | 2 +-
- arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts   | 2 +-
- arch/arm/dts/sun50i-h6-beelink-gs1.dts          | 2 +-
- arch/arm/dts/sun50i-h6-pine-h64.dts             | 2 +-
- arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts     | 2 +-
- arch/arm/dts/sun7i-a20-bananapi.dts             | 2 +-
- arch/arm/dts/sun7i-a20-bananapro.dts            | 2 +-
- arch/arm/dts/sun7i-a20-cubietruck.dts           | 2 +-
- arch/arm/dts/sun7i-a20-hummingbird.dts          | 2 +-
- arch/arm/dts/sun7i-a20-lamobo-r1.dts            | 2 +-
- arch/arm/dts/sun7i-a20-olimex-som-evb.dts       | 2 +-
- arch/arm/dts/sun7i-a20-olimex-som204-evb.dts    | 2 +-
- arch/arm/dts/sun7i-a20-olinuxino-lime2.dts      | 2 +-
- arch/arm/dts/sun7i-a20-orangepi-mini.dts        | 2 +-
- arch/arm/dts/sun7i-a20-orangepi.dts             | 2 +-
- arch/arm/dts/sun7i-a20-pcduino3-nano.dts        | 2 +-
- arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts     | 2 +-
- arch/arm/dts/sun8i-a83t-bananapi-m3.dts         | 2 +-
- arch/arm/dts/sun8i-a83t-cubietruck-plus.dts     | 2 +-
- arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts        | 2 +-
- arch/arm/dts/sun8i-h3-orangepi-plus.dts         | 2 +-
- arch/arm/dts/sun8i-h3-orangepi-plus2e.dts       | 2 +-
- arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts    | 2 +-
- arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts    | 2 +-
- arch/arm/dts/sunxi-bananapi-m2-plus.dtsi        | 2 +-
- 36 files changed, 36 insertions(+), 36 deletions(-)
-
-diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-index ef1c90401b..e1c22aeb29 100644
---- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-+++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-@@ -112,7 +112,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_dc1sw>;
- 	status = "okay";
-diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-index 31884dbc88..03ebe3e44b 100644
---- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-+++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-@@ -102,7 +102,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_dcdc1>;
- 	status = "okay";
-diff --git a/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
-index 6a2154525d..94caf110ab 100644
---- a/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
-+++ b/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
-@@ -30,7 +30,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_dc1sw>;
- 	allwinner,tx-delay-ps = <600>;
-diff --git a/arch/arm/dts/sun50i-a64-olinuxino.dts b/arch/arm/dts/sun50i-a64-olinuxino.dts
-index f7a4bccaa5..2396d9b797 100644
---- a/arch/arm/dts/sun50i-a64-olinuxino.dts
-+++ b/arch/arm/dts/sun50i-a64-olinuxino.dts
-@@ -102,7 +102,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_dcdc1>;
- 	allwinner,tx-delay-ps = <600>;
-diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts
-index b0c64f7579..5b5d4f31b6 100644
---- a/arch/arm/dts/sun50i-a64-orangepi-win.dts
-+++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts
-@@ -127,7 +127,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
-diff --git a/arch/arm/dts/sun50i-a64-pine64-plus.dts b/arch/arm/dts/sun50i-a64-pine64-plus.dts
-index 24f1aac366..b09b4276f1 100644
---- a/arch/arm/dts/sun50i-a64-pine64-plus.dts
-+++ b/arch/arm/dts/sun50i-a64-pine64-plus.dts
-@@ -52,7 +52,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-txid";
- 	phy-handle = <&ext_rgmii_phy>;
- 	status = "okay";
- };
-diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-index 53fcc9098d..4a50a18128 100644
---- a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-+++ b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-@@ -95,7 +95,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_dc1sw>;
- 	status = "okay";
-diff --git a/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
-index df1b9263ad..6e30a564c8 100644
---- a/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
-+++ b/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
-@@ -36,7 +36,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	/delete-property/ allwinner,leds-active-low;
- 	status = "okay";
- };
-diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
-index 4f9ba53ffa..9d93fe1536 100644
---- a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
-+++ b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
-@@ -96,7 +96,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
-index b059e20813..e8ab8c2df5 100644
---- a/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
-+++ b/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
-@@ -75,7 +75,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
-index 70b5f09984..6cc567ea99 100644
---- a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
-+++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
-@@ -118,7 +118,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-h5-orangepi-prime.dts b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
-index cb44bfa598..33ab44072e 100644
---- a/arch/arm/dts/sun50i-h5-orangepi-prime.dts
-+++ b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
-@@ -124,7 +124,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
-index ef5ca64442..de448ca51e 100644
---- a/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
-+++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
-@@ -69,7 +69,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
-index 0dc33c90dd..024035d36e 100644
---- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
-+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
-@@ -64,7 +64,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&ext_rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_aldo2>;
- 	status = "okay";
-diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts
-index 1898345183..13fbf26817 100644
---- a/arch/arm/dts/sun50i-h6-pine-h64.dts
-+++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
-@@ -66,7 +66,7 @@
- &emac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&ext_rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-handle = <&ext_rgmii_phy>;
- 	phy-supply = <&reg_aldo2>;
- 	allwinner,rx-delay-ps = <200>;
-diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
-index e2bfe00588..4dbcad1343 100644
---- a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
-+++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
-@@ -130,7 +130,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
- 
-diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts
-index 81bc85d398..33040c43bc 100644
---- a/arch/arm/dts/sun7i-a20-bananapi.dts
-+++ b/arch/arm/dts/sun7i-a20-bananapi.dts
-@@ -132,7 +132,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
- 
-diff --git a/arch/arm/dts/sun7i-a20-bananapro.dts b/arch/arm/dts/sun7i-a20-bananapro.dts
-index 0176e9de01..8a75545e22 100644
---- a/arch/arm/dts/sun7i-a20-bananapro.dts
-+++ b/arch/arm/dts/sun7i-a20-bananapro.dts
-@@ -110,7 +110,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
- 
-diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
-index 99f531b8d2..46a9f4669e 100644
---- a/arch/arm/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
-@@ -151,7 +151,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- 
- 	phy1: ethernet-phy@1 {
-diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts
-index fd0153f656..5c3d107094 100644
---- a/arch/arm/dts/sun7i-a20-hummingbird.dts
-+++ b/arch/arm/dts/sun7i-a20-hummingbird.dts
-@@ -101,7 +101,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_gmac_vdd>;
- 	/* phy reset config */
- 	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
-diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-index f91e1bee44..8173d77c12 100644
---- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-+++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-@@ -120,7 +120,7 @@
- &gmac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
- 	/delete-property/#address-cells;
-diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
-index f0e6a96e57..f0c5160ff8 100644
---- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
-+++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
-@@ -112,7 +112,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- 
- 	phy1: ethernet-phy@1 {
-diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
-index 823aabce04..ff42708137 100644
---- a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
-+++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
-@@ -106,7 +106,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy3>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_vcc3v3>;
- 
- 	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>;
-diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
-index 4e1c590eb0..996201665b 100644
---- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
-+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
-@@ -112,7 +112,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- 
- 	phy1: ethernet-phy@1 {
-diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
-index 15881081ca..b80215c61c 100644
---- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts
-+++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
-@@ -121,7 +121,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
- 
-diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts
-index d64de2e73a..66efb7d1ab 100644
---- a/arch/arm/dts/sun7i-a20-orangepi.dts
-+++ b/arch/arm/dts/sun7i-a20-orangepi.dts
-@@ -97,7 +97,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
- 
-diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
-index 538ea15fa3..205eaae44a 100644
---- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
-+++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
-@@ -115,7 +115,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- 
- 	phy1: ethernet-phy@1 {
-diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
-index c27e56091f..56cc5791c4 100644
---- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
-+++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
-@@ -82,7 +82,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- 
- 	phy1: ethernet-phy@1 {
-diff --git a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
-index eaff6fa401..2beafe3a31 100644
---- a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
-+++ b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
-@@ -123,7 +123,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_sw>;
- 	phy-handle = <&rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	allwinner,rx-delay-ps = <700>;
- 	allwinner,tx-delay-ps = <700>;
- 	status = "okay";
-diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
-index 5dba4fc310..ecd9ff38a8 100644
---- a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
-+++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
-@@ -160,7 +160,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_dldo4>;
- 	phy-handle = <&rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
-index 4ba533b034..bc370d4ea1 100644
---- a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
-+++ b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
-@@ -96,7 +96,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 
- 	status = "okay";
- };
-diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
-index 97f497854e..d05fa679dc 100644
---- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts
-+++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
-@@ -85,7 +85,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 
- 	status = "okay";
- };
-diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
-index 6dbf7b2e0c..b6ca45d18e 100644
---- a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
-+++ b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
-@@ -67,7 +67,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	status = "okay";
- };
- 
-diff --git a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
-index c488aaacbd..9c20245eef 100644
---- a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
-+++ b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
-@@ -129,7 +129,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy-handle = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_dc1sw>;
- 	status = "okay";
- };
-diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
-index 15c22b06fc..3ab6f47cea 100644
---- a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
-+++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
-@@ -120,7 +120,7 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
- 	phy-handle = <&phy1>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 	phy-supply = <&reg_dc1sw>;
- 	status = "okay";
- };
-diff --git a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
-index 39263e74fb..8e5cb3b3fd 100644
---- a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
-+++ b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
-@@ -126,7 +126,7 @@
- 	pinctrl-0 = <&emac_rgmii_pins>;
- 	phy-supply = <&reg_gmac_3v3>;
- 	phy-handle = <&ext_rgmii_phy>;
--	phy-mode = "rgmii";
-+	phy-mode = "rgmii-id";
- 
- 	status = "okay";
- };
--- 
-2.28.0
-

AllWinner-PineTab.patch

@@ -1,45 +0,0 @@
-From 6bf15552c2b6becb48ce7732120e0ddb2078cb1a Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 14 Apr 2020 09:53:07 +0100
-Subject: [PATCH 9/9] initial pinetab support
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- configs/pinetab_defconfig | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
- create mode 100644 configs/pinetab_defconfig
-
-diff --git a/configs/pinetab_defconfig b/configs/pinetab_defconfig
-new file mode 100644
-index 0000000000..5b9620f3e5
---- /dev/null
-+++ b/configs/pinetab_defconfig
-@@ -0,0 +1,26 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN50I=y
-+CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
-+CONFIG_DRAM_CLK=552
-+CONFIG_DRAM_ZQ=3881949
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-+CONFIG_R_I2C_ENABLE=y
-+CONFIG_SPL_SPI_SUNXI=y
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+CONFIG_USE_PREBOOT=y
-+# CONFIG_SPL_DOS_PARTITION is not set
-+# CONFIG_SPL_EFI_PARTITION is not set
-+CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinetab"
-+CONFIG_OF_LIST="sun50i-a64-pinetab"
-+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-+CONFIG_DM_REGULATOR=y
-+CONFIG_DM_REGULATOR_FIXED=y
-+CONFIG_DM_PWM=y
-+CONFIG_PWM_SUNXI=y
-+CONFIG_LED=y
-+CONFIG_LED_GPIO=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_OHCI_HCD=y
-+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
--- 
-2.26.0

aarch64-boards

@@ -1,75 +0,0 @@
-a64-olinuxino
-amarula_a64_relic
-bananapi_m2_plus_h5
-bananapi_m64
-dragonboard410c
-dragonboard820c
-espresso7420
-evb-rk3328
-evb-rk3399
-ficus-rk3399
-firefly-rk3399
-geekbox
-hikey
-khadas-edge-captain-rk3399
-khadas-edge-v-rk3399
-khadas-edge-rk3399
-khadas-vim
-khadas-vim2
-khadas-vim3
-khadas-vim3l
-libretech-ac
-libretech_all_h3_cc_h5
-libretech_all_h3_it_h5
-libretech_all_h5_cc_h5
-libretech-cc
-mvebu_espressobin-88f3720
-mvebu_mcbin-88f8040
-nanopc-t4-rk3399
-nanopi_a64
-nanopi-k2
-nanopi-m4-rk3399
-nanopi-m4-2gb-rk3399
-nanopi_neo2
-nanopi-neo4-rk3399
-nanopi_neo_plus2
-odroid-c2
-orangepi_lite2
-orangepi_one_plus
-orangepi_pc2
-orangepi_prime
-orangepi-rk3399
-orangepi_win
-orangepi_zero_plus
-orangepi_zero_plus2
-p212
-p2371-2180
-p2771-0000-500
-p3450-0000
-pine64-lts
-pine64_plus
-pinebook
-pinebook-pro-rk3399
-pinephone
-pinetab
-pine_h64
-poplar
-puma-rk3399
-rock64-rk3328
-rock960-rk3399
-rock-pi-4-rk3399
-rock-pi-4c-rk3399
-rock-pi-e-rk3328
-rock-pi-n10-rk3399pro
-rockpro64-rk3399
-roc-cc-rk3328
-roc-pc-rk3399
-roc-pc-mezzanine-rk3399
-rpi_3
-rpi_4
-rpi_arm64
-sopine_baseboard
-teres_i
-turris_mox
-vexpress_aemv8a_juno
-xilinx_zynqmp_virt

add-BOOTENV_INIT_COMMAND-for-commands-that-may-be-ne.patch

@@ -0,0 +1,38 @@
+From 6e9ac1e8c6b51189dc0908585eb2b0240f213821 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Thu, 2 Jul 2015 23:28:56 +0100
+Subject: [PATCH 2/5] Add BOOTENV_INIT_COMMAND for commands that may be needed
+ to run before bootcmd, such as setting the fdt file variables for platfroms
+ that detect on boot.
+
+---
+ include/config_distro_bootcmd.h | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
+index 3a360ca4..dcad4c8 100644
+--- a/include/config_distro_bootcmd.h
++++ b/include/config_distro_bootcmd.h
+@@ -176,6 +176,10 @@
+ #define BOOTENV_BOOT_TARGETS \
+ 	"boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0"
+ 
++#ifndef BOOTENV_INIT_COMMAND
++#define BOOTENV_INIT_COMMAND
++#endif
++
+ #define BOOTENV_DEV(devtypeu, devtypel, instance) \
+ 	BOOTENV_DEV_##devtypeu(devtypeu, devtypel, instance)
+ #define BOOTENV \
+@@ -237,7 +241,7 @@
+ 	\
+ 	BOOT_TARGET_DEVICES(BOOTENV_DEV)                                  \
+ 	\
+-	"distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT                      \
++	"distro_bootcmd=" BOOTENV_INIT_COMMAND BOOTENV_SET_SCSI_NEED_INIT                      \
+ 		"for target in ${boot_targets}; do "                      \
+ 			"run bootcmd_${target}; "                         \
+ 		"done\0"
+-- 
+2.5.0
+

arm-chromebooks

@@ -1,8 +0,0 @@
-chromebit_mickey_defconfig
-chromebook_jerry_defconfig
-chromebook_minnie_defconfig
-nyan-big_defconfig
-peach-pi_defconfig
-peach-pit_defconfig
-snow_defconfig
-spring_defconfig

arm-rk3399-enable-rng-on-rock960-and-firefly3399.patch

@@ -1,135 +0,0 @@
-From 5cb3ca7ebd46c1983d0929b5ba027a03c1f5e51e Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Wed, 16 Dec 2020 15:22:34 +0000
-Subject: [PATCH 1/2] arm: dts: rockchip: rk3399: enable rng at the SoC level
-
-The rng is embedded in the SoC so enable it in the device tree
-universally, the use of it can be controlled by enabling/disabling
-at the device config level.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- arch/arm/dts/rk3399-evb-u-boot.dtsi          | 4 ----
- arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi | 4 ----
- arch/arm/dts/rk3399-rockpro64-u-boot.dtsi    | 4 ----
- arch/arm/dts/rk3399-u-boot.dtsi              | 2 +-
- 4 files changed, 1 insertion(+), 13 deletions(-)
-
-diff --git a/arch/arm/dts/rk3399-evb-u-boot.dtsi b/arch/arm/dts/rk3399-evb-u-boot.dtsi
-index 8056dc843e..398b205ec2 100644
---- a/arch/arm/dts/rk3399-evb-u-boot.dtsi
-+++ b/arch/arm/dts/rk3399-evb-u-boot.dtsi
-@@ -13,10 +13,6 @@
- 	};
- };
- 
--&rng {
--	status = "okay";
--};
--
- &i2c0 {
- 	u-boot,dm-pre-reloc;
- };
-diff --git a/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
-index ded7db0aef..c3e866a779 100644
---- a/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
-+++ b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
-@@ -28,10 +28,6 @@
- 	u-boot,dm-pre-reloc;
- };
- 
--&rng {
--	status = "okay";
--};
--
- &sdhci {
- 	max-frequency = <25000000>;
- 	u-boot,dm-pre-reloc;
-diff --git a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
-index 6317b47e41..37dff04adf 100644
---- a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
-+++ b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
-@@ -15,10 +15,6 @@
- 	};
- };
- 
--&rng {
--	status = "okay";
--};
--
- &spi1 {
- 	spi_flash: flash@0 {
- 		u-boot,dm-pre-reloc;
-diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
-index ecd230c720..73922c328a 100644
---- a/arch/arm/dts/rk3399-u-boot.dtsi
-+++ b/arch/arm/dts/rk3399-u-boot.dtsi
-@@ -32,7 +32,7 @@
- 	rng: rng@ff8b8000 {
- 		compatible = "rockchip,cryptov1-rng";
- 		reg = <0x0 0xff8b8000 0x0 0x1000>;
--		status = "disabled";
-+		status = "okay";
- 	};
- 
- 	dmc: dmc {
--- 
-2.29.2
-
-From 62093137fcbe760d009cf2757feda7ccf328fbb7 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Wed, 16 Dec 2020 15:37:21 +0000
-Subject: [PATCH 2/2] configs: rk3399: enable rng on firefly/rock960/rockpro64
-
-Enable the RNG on the Firefly, rock960 and RockPro64 devices
-to enable KASLR on devices that support it.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- configs/firefly-rk3399_defconfig   | 2 ++
- configs/rock960-rk3399_defconfig   | 2 ++
- configs/rockpro64-rk3399_defconfig | 2 ++
- 3 files changed, 6 insertions(+)
-
-diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
-index c453b82dc5..cfbaae40aa 100644
---- a/configs/firefly-rk3399_defconfig
-+++ b/configs/firefly-rk3399_defconfig
-@@ -35,6 +35,8 @@ CONFIG_MMC_DW=y
- CONFIG_MMC_DW_ROCKCHIP=y
- CONFIG_MMC_SDHCI=y
- CONFIG_MMC_SDHCI_ROCKCHIP=y
-+CONFIG_DM_RNG=y
-+CONFIG_RNG_ROCKCHIP=y
- CONFIG_SF_DEFAULT_SPEED=20000000
- CONFIG_DM_ETH=y
- CONFIG_ETH_DESIGNWARE=y
-diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
-index 65dce3cd73..aadbc55f57 100644
---- a/configs/rock960-rk3399_defconfig
-+++ b/configs/rock960-rk3399_defconfig
-@@ -39,6 +39,8 @@ CONFIG_MMC_DW_ROCKCHIP=y
- CONFIG_MMC_SDHCI=y
- CONFIG_MMC_SDHCI_SDMA=y
- CONFIG_MMC_SDHCI_ROCKCHIP=y
-+CONFIG_DM_RNG=y
-+CONFIG_RNG_ROCKCHIP=y
- CONFIG_DM_ETH=y
- CONFIG_NVME=y
- CONFIG_PCI=y
-diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
-index 575b7a20d5..f78dfcc8f7 100644
---- a/configs/rockpro64-rk3399_defconfig
-+++ b/configs/rockpro64-rk3399_defconfig
-@@ -42,6 +42,8 @@ CONFIG_MMC_DW=y
- CONFIG_MMC_DW_ROCKCHIP=y
- CONFIG_MMC_SDHCI=y
- CONFIG_MMC_SDHCI_ROCKCHIP=y
-+CONFIG_DM_RNG=y
-+CONFIG_RNG_ROCKCHIP=y
- CONFIG_SF_DEFAULT_BUS=1
- CONFIG_SPI_FLASH_GIGADEVICE=y
- CONFIG_DM_ETH=y
--- 
-2.29.2
-

armv7-boards

@@ -6,24 +6,17 @@ A20-Olimex-SOM-EVB
 A20-OLinuXino-Lime
 A20-OLinuXino-Lime2
 A20-OLinuXino_MICRO
-am335x_evm
+am335x_boneblack
 am57xx_evm
 Ampe_A76
-apalis_imx6
 arndale
 Auxtek-T003
 Auxtek-T004
 ba10_tv_box
 Bananapi
-bananapi_m1_plus
-bananapi_m2_berry
-Bananapi_m2m
-bananapi_m2_plus_h3
-Bananapi_M2_Ultra
-bananapi_m2_zero
 Bananapro
-chiliboard
 CHIP
+chromebook_jerry
 Chuwi_V7_CW0825
 clearfog
 cm_fx6
@@ -32,38 +25,28 @@ colorfly_e708_q1
 CSQ_CS908
 Cubieboard
 Cubieboard2
-Cubieboard4
 Cubietruck
 Cubietruck_plus
 db-mv784mp-gp
 difrnce_dit4350
 dserve_dsrv9703c
-evb-rk3229
+fennec-rk3288
 firefly-rk3288
-helios4
+highbank
 Hummingbird_A31
 Hyundai_A7HD
 i12-tvbox
 icnova-a20-swac
-inet1
-iNet_3F
-iNet_3W
-inet86dz
 iNet_86VS
-inet97fv2
-inet98v_rev2
-inet9f_rev03
-inet_q972
+inet86dz
 Itead_Ibox_A20
 jesurun_q5
 jetson-tk1
 kc1
 Lamobo_R1
-libretech_all_h3_cc_h2_plus
 Linksprite_pcDuino
 Linksprite_pcDuino3
 Linksprite_pcDuino3_Nano
-liteboard
 marsboard
 Marsboard_A10
 Mele_A1000
@@ -80,13 +63,12 @@ MK808C
 MSI_Primo73
 MSI_Primo81
 mx6cuboxi
-nanopi_m1
-nanopi_m1_plus
-nanopi_neo
 novena
+nyan-big
 odroid
 odroid-xu3
 omap3_beagle
+omap3_pandora
 omap4_panda
 omap5_uevm
 Orangepi
@@ -98,46 +80,36 @@ orangepi_pc
 orangepi_pc_plus
 orangepi_plus
 orangepi_plus2e
-orangepi_r1
-orangepi_zero
 origen
 paz00
-pinecube
+peach-pi
+peach-pit
 polaroid_mid2809pxe04
 pov_protab2_ips9
 q8_a13_tablet
 q8_a23_tablet_800x480
 q8_a33_tablet_1024x600
 q8_a33_tablet_800x480
-qemu_arm
 r7-tv-dongle
 riotboard
-rock
-rock-pi-n8-rk3288
 rock2
 rpi_2
 rpi_3_32b
-rpi_4_32b
 Sinlinx_SinA31s
-Sinovoip_BPI_M2
-Sinovoip_BPI_M3
-stih410-b2260
-stm32mp15_basic
+smdkv310
+snow
+spring
 sunxi_Gemei_G9
-tbs_a711
-tinker-rk3288
-tinker-s-rk3288
 trimslice
 udoo
-udoo_neo
-usbarmory
 UTOO_P66
 vexpress_ca15_tc2
 vexpress_ca9x4
 wandboard
 warp
-warp7
 Wexler_TAB7200
 Wits_Pro_A20_DKT
 Yones_Toptech_BS1078_V2
-xilinx_zynq_virt
+zynq_microzed
+zynq_zed
+zynq_zybo

armv8-boards

@@ -0,0 +1,10 @@
+dragonboard410c
+espresso7420
+hikey
+odroid-c2
+p2371-2180
+pine64_plus
+rpi_3
+vexpress_aemv8a_dram
+vexpress_aemv8a_juno
+vexpress_aemv8a_semi

dragonboard-fixes.patch

@@ -1,115 +0,0 @@
-From 8b0274a733cd1ce39ad9ad18e1bd8efdd02a40b7 Mon Sep 17 00:00:00 2001
-From: Rob Clark <robdclark@gmail.com>
-Date: Wed, 21 Jun 2017 14:21:15 -0400
-Subject: [PATCH 1/3] WIP: fix usb
-
----
- common/usb_storage.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/common/usb_storage.c b/common/usb_storage.c
-index d92ebb6eb19..9df3c3daaf4 100644
---- a/common/usb_storage.c
-+++ b/common/usb_storage.c
-@@ -1016,7 +1016,7 @@ static int usb_request_sense(struct scsi_cmd *srb, struct us_data *ss)
- 
- static int usb_test_unit_ready(struct scsi_cmd *srb, struct us_data *ss)
- {
--	int retries = 10;
-+	int retries = 20;
- 
- 	do {
- 		memset(&srb->cmd[0], 0, 12);
-@@ -1039,7 +1039,7 @@ static int usb_test_unit_ready(struct scsi_cmd *srb, struct us_data *ss)
- 		if ((srb->sense_buf[2] == 0x02) &&
- 		    (srb->sense_buf[12] == 0x3a))
- 			return -1;
--		mdelay(100);
-+		mdelay(250);
- 	} while (retries--);
- 
- 	return -1;
--- 
-2.19.1
-
-From 7bf41d74ca9d58bc2243b7688f8987c1d373ea56 Mon Sep 17 00:00:00 2001
-From: Rob Clark <robdclark@gmail.com>
-Date: Mon, 3 Jul 2017 08:34:37 -0400
-Subject: [PATCH 2/3] HACK: disable emmc
-
-Hitting some timeout which makes boot take much longer.  And
-uefi/boot/rootfs partitions will be on sd-card or usb disk, etc,
-so we can just ignore emmc.
----
- arch/arm/dts/dragonboard410c.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts
-index fa348bc621e..bfe7f15d5ed 100644
---- a/arch/arm/dts/dragonboard410c.dts
-+++ b/arch/arm/dts/dragonboard410c.dts
-@@ -106,6 +106,7 @@
- 			#phy-cells = <0>;
- 		};
- 
-+/*
- 		sdhci@07824000 {
- 			compatible = "qcom,sdhci-msm-v4";
- 			reg = <0x7824900 0x11c 0x7824000 0x800>;
-@@ -115,6 +116,7 @@
- 			clock = <&clkc 0>;
- 			clock-frequency = <100000000>;
- 		};
-+*/
- 
- 		sdhci@07864000 {
- 			compatible = "qcom,sdhci-msm-v4";
--- 
-2.19.1
-
-From 871fe802cf3ab593b9332c4f36ab2b3f179d51ae Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 4 Sep 2018 12:21:59 +0100
-Subject: [PATCH 3/3] add options for dm410c config
-
----
- configs/dragonboard410c_defconfig | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
-diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig
-index a55abaf8df5..4ece0cafbe4 100644
---- a/configs/dragonboard410c_defconfig
-+++ b/configs/dragonboard410c_defconfig
-@@ -7,6 +7,8 @@ CONFIG_NR_DRAM_BANKS=1
- # CONFIG_ANDROID_BOOT_IMAGE is not set
- CONFIG_FIT=y
- CONFIG_OF_BOARD_SETUP=y
-+CONFIG_FAT_WRITE=y
-+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
- CONFIG_MISC_INIT_R=y
- # CONFIG_DISPLAY_CPUINFO is not set
- # CONFIG_DISPLAY_BOARDINFO is not set
-@@ -41,6 +43,13 @@ CONFIG_DM_PMIC=y
- CONFIG_PMIC_PM8916=y
- CONFIG_MSM_SERIAL=y
- CONFIG_SPMI_MSM=y
-+CONFIG_DM_ETH=y
-+CONFIG_DM_KEYBOARD=y
-+CONFIG_DM_VIDEO=y
-+# CONFG_VIDEO_BPP8 is not set
-+CONFIG_NO_FB_CLEAR=y
-+CONFIG_VIDEO_SIMPLE=y
-+CONFIG_USB_KEYBOARD=y
- CONFIG_USB=y
- CONFIG_DM_USB=y
- CONFIG_USB_EHCI_HCD=y
-@@ -57,5 +66,6 @@ CONFIG_USB_HOST_ETHER=y
- CONFIG_USB_ETHER_ASIX=y
- CONFIG_USB_ETHER_ASIX88179=y
- CONFIG_USB_ETHER_MCS7830=y
-+CONFIG_USB_ETHER_RTL8152=y
- CONFIG_USB_ETHER_SMSC95XX=y
- CONFIG_OF_LIBFDT_OVERLAY=y
--- 
-2.19.1
-

mvebu-enable-generic-distro-boot-config.patch

@@ -0,0 +1,127 @@
+From ed2f11671a20a92841b4d0614e9f46d5867c2bb4 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Tue, 23 Aug 2016 09:54:50 +0100
+Subject: [PATCH] [PATCH] arm: mvebu: enable generic distro boot config
+
+Switch all of the mvebu boards to support disto generic booting
+This will enable Fedora, Debian and other distros to support
+mvebu systems easier. Tested on SolidRun ClearFog
+
+Signed-off-by: Dennis Gilmore <dgilmore@redhat.com>
+---
+ include/configs/clearfog.h  |  5 ---
+ include/configs/mv-common.h | 84 +++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 84 insertions(+), 5 deletions(-)
+
+diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
+index ffaeedb..fd0114e 100644
+--- a/include/configs/clearfog.h
++++ b/include/configs/clearfog.h
+@@ -90,11 +90,6 @@
+ #define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
+ #define CONFIG_SYS_ALT_MEMTEST
+ 
+-/* Keep device tree and initrd in lower memory so the kernel can access them */
+-#define CONFIG_EXTRA_ENV_SETTINGS	\
+-	"fdt_high=0x10000000\0"		\
+-	"initrd_high=0x10000000\0"
+-
+ /* SPL */
+ /*
+  * Select the boot device here
+diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
+index 62f4937..a3e2fbf 100644
+--- a/include/configs/mv-common.h
++++ b/include/configs/mv-common.h
+@@ -147,4 +147,88 @@
+ #define CONFIG_LZO
+ #endif
+ 
++#ifndef CONFIG_SPL_BUILD
++#include <config_distro_defaults.h>
++
++/*
++* 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
++* 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
++* 1M script, 1M pxe and the ramdisk at the end.
++*/
++#define SDRAM_OFFSET(x) 0x0##x
++
++#define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
++#define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
++#define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
++#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
++#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
++
++#define MEM_LAYOUT_ENV_SETTINGS \
++        "bootm_size=0xa000000\0" \
++        "kernel_addr_r=" KERNEL_ADDR_R "\0" \
++        "fdt_addr_r=" FDT_ADDR_R "\0" \
++        "scriptaddr=" SCRIPT_ADDR_R "\0" \
++        "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
++        "ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
++
++#ifdef CONFIG_MMC
++#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
++#else
++#define BOOT_TARGET_DEVICES_MMC(func)
++#endif
++
++#ifdef CONFIG_CMD_SATA
++#define BOOT_TARGET_DEVICES_SATA(func) func(SATA, sata, 0) func(SATA, sata, 1)
++#define CONFIG_PREBOOT                  "sata init"
++#else
++#define BOOT_TARGET_DEVICES_SATA(func)
++#endif
++
++#ifdef CONFIG_USB_STORAGE
++#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
++#else
++#define BOOT_TARGET_DEVICES_USB(func)
++#endif
++
++#define BOOT_TARGET_DEVICES(func) \
++        BOOT_TARGET_DEVICES_MMC(func) \
++        BOOT_TARGET_DEVICES_SATA(func) \
++        BOOT_TARGET_DEVICES_USB(func) \
++        func(PXE, pxe, na)
++
++#include <config_distro_bootcmd.h>
++
++#ifdef CONFIG_USB_KEYBOARD
++#define CONSOLE_STDIN_SETTINGS \
++        "preboot=usb start\0" \
++        "stdin=serial,usbkbd\0"
++#else
++#define CONSOLE_STDIN_SETTINGS \
++        "stdin=serial\0"
++#endif
++
++#ifdef CONFIG_VIDEO
++#define CONSOLE_STDOUT_SETTINGS \
++        "stdout=serial,vga\0" \
++        "stderr=serial,vga\0"
++#else
++#define CONSOLE_STDOUT_SETTINGS \
++        "stdout=serial\0" \
++        "stderr=serial\0"
++#endif
++
++#define CONSOLE_ENV_SETTINGS \
++        CONSOLE_STDIN_SETTINGS \
++        CONSOLE_STDOUT_SETTINGS
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++        CONSOLE_ENV_SETTINGS \
++        MEM_LAYOUT_ENV_SETTINGS \
++        "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
++        "console=ttyS0,115200\0" \
++        BOOTENV
++#else /* ifndef CONFIG_SPL_BUILD */
++#define CONFIG_EXTRA_ENV_SETTINGS
++#endif
++
+ #endif /* _MV_COMMON_H */
+-- 
+2.9.3
+

port-utilite-to-distro-generic-boot-commands.patch

@@ -0,0 +1,154 @@
+From af017eb82317dc88c1b23301d76466b389c2e007 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Tue, 13 Sep 2016 08:47:34 +0100
+Subject: [PATCH] port utilite to distro generic boot commands
+
+---
+ include/configs/cm_fx6.h | 115 ++++++++++++-----------------------------------
+ 1 file changed, 29 insertions(+), 86 deletions(-)
+
+diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
+index c839b03..4dd501e 100644
+--- a/include/configs/cm_fx6.h
++++ b/include/configs/cm_fx6.h
+@@ -11,6 +11,7 @@
+ #ifndef __CONFIG_CM_FX6_H
+ #define __CONFIG_CM_FX6_H
+ 
++#include <config_distro_defaults.h>
+ #include "mx6_common.h"
+ 
+ /* Machine config */
+@@ -78,101 +79,43 @@
+ #define CONFIG_ENV_SIZE			(8 * 1024)
+ #define CONFIG_ENV_OFFSET		(768 * 1024)
+ 
++#ifndef CONFIG_SPL_BUILD
++#include <config_distro_defaults.h>
++#include <config_distro_bootcmd.h>
++
++#ifdef CONFIG_AHCI
++#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
++#else
++#define BOOT_TARGET_DEVICES_SCSI(func)
++#endif
++
++#define BOOT_TARGET_DEVICES(func) \
++	func(MMC, mmc, 2) \
++	BOOT_TARGET_DEVICES_SCSI(func) \
++	func(PXE, pxe, na) \
++	func(DHCP, dhcp, na)
++
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ 	"stdin=serial,usbkbd\0" \
+ 	"stdout=serial,vga\0" \
+ 	"stderr=serial,vga\0" \
+ 	"panel=HDMI\0" \
+-	"autoload=no\0" \
+-	"uImage=uImage-cm-fx6\0" \
+-	"zImage=zImage-cm-fx6\0" \
+-	"kernel=uImage-cm-fx6\0" \
+-	"script=boot.scr\0" \
+-	"dtb=cm-fx6.dtb\0" \
+-	"bootm_low=18000000\0" \
++	"dtb=imx6q-utilite-pro.dts\0" \
+ 	"loadaddr=0x10800000\0" \
+ 	"fdtaddr=0x11000000\0" \
++	"fdt_addr_r=0x18000000\0" \
++	"pxefile_addr_r=0x17f00000\0" \
++	"scriptaddr=0x17e00000\0" \
++	"kernel_addr_r=0x11000000\0" \
++	"ramdisk_addr_r=0x18100000\0" \
++	"bootm_size=0x20000000\0" \
+ 	"console=ttymxc3,115200\0" \
+ 	"ethprime=FEC0\0" \
+-	"video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
+-	"video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
+-	"doboot=bootm ${loadaddr}\0" \
+-	"doloadfdt=false\0" \
+-	"mtdids=" MTDIDS_DEFAULT "\0" \
+-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+-	"setboottypez=setenv kernel ${zImage};" \
+-		"setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
+-		"setenv doloadfdt true;\0" \
+-	"setboottypem=setenv kernel ${uImage};" \
+-		"setenv doboot bootm ${loadaddr};" \
+-		"setenv doloadfdt false;\0"\
+-	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
+-	"sataroot=/dev/sda2 rw rootwait\0" \
+-	"nandroot=/dev/mtdblock4 rw\0" \
+-	"nandrootfstype=ubifs\0" \
+-	"mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
+-		"${video} ${extrabootargs}\0" \
+-	"sataargs=setenv bootargs console=${console} root=${sataroot} " \
+-		"${video} ${extrabootargs}\0" \
+-	"nandargs=setenv bootargs console=${console} " \
+-		"root=${nandroot} " \
+-		"rootfstype=${nandrootfstype} " \
+-		"${video} ${extrabootargs}\0" \
+-	"nandboot=if run nandloadkernel; then " \
+-			"run nandloadfdt;" \
+-			"run setboottypem;" \
+-			"run storagebootcmd;" \
+-			"run setboottypez;" \
+-			"run storagebootcmd;" \
+-		"fi;\0" \
+-	"run_eboot=echo Starting EBOOT ...; "\
+-		"mmc dev 2 && " \
+-		"mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
+-	"loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\
+-	"loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\
+-	"loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \
+-	"bootscript=echo Running bootscript from ${storagetype} ...;" \
+-		   "source ${loadaddr};\0" \
+-	"nandloadkernel=nand read ${loadaddr} 0 780000;\0" \
+-	"nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
+-	"setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
+-	"setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
+-	"setupnandboot=setenv storagetype nand;\0" \
+-	"setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
+-	"storagebootcmd=echo Booting from ${storagetype} ...;" \
+-			"run ${storagetype}args; run doboot;\0" \
+-	"trybootk=if run loadkernel; then " \
+-		"if ${doloadfdt}; then " \
+-			"run loadfdt;" \
+-		"fi;" \
+-		"run storagebootcmd;" \
+-		"fi;\0" \
+-	"trybootsmz=if run loadscript; then " \
+-			"run bootscript;" \
+-		"fi;" \
+-		"run setboottypem;" \
+-		"run trybootk;" \
+-		"run setboottypez;" \
+-		"run trybootk;\0"
+-
+-#define CONFIG_BOOTCOMMAND \
+-	"run setupmmcboot;" \
+-	"mmc dev ${storagedev};" \
+-	"if mmc rescan; then " \
+-		"run trybootsmz;" \
+-	"fi;" \
+-	"run setupusbboot;" \
+-	"if usb start; then "\
+-		"if run loadscript; then " \
+-			"run bootscript;" \
+-		"fi;" \
+-	"fi;" \
+-	"run setupsataboot;" \
+-	"if sata init; then " \
+-		"run trybootsmz;" \
+-	"fi;" \
+-	"run setupnandboot;" \
+-	"run nandboot;"
++	BOOTENV
++
++#else /* ifndef CONFIG_SPL_BUILD */
++#define CONFIG_EXTRA_ENV_SETTINGS
++#endif
+ 
+ #define CONFIG_PREBOOT		"usb start;sf probe"
+ 
+-- 
+2.9.3
+

rng-Add-iProc-RNG200-driver.patch

@@ -1,450 +0,0 @@
-From patchwork Tue Dec 15 09:49:23 2020
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: mbrugger <matthias.bgg@kernel.org>
-X-Patchwork-Id: 1416366
-X-Patchwork-Delegate: matthias.bgg@gmail.com
-Return-Path: <u-boot-bounces@lists.denx.de>
-X-Original-To: incoming@patchwork.ozlabs.org
-Delivered-To: patchwork-incoming@bilbo.ozlabs.org
-Authentication-Results: ozlabs.org;
- spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
- (client-ip=85.214.62.61; helo=phobos.denx.de;
- envelope-from=u-boot-bounces@lists.denx.de; receiver=<UNKNOWN>)
-Authentication-Results: ozlabs.org;
- dmarc=fail (p=none dis=none) header.from=kernel.org
-Received: from phobos.denx.de (phobos.denx.de [85.214.62.61])
-	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
-	 key-exchange X25519 server-signature RSA-PSS (4096 bits))
-	(No client certificate requested)
-	by ozlabs.org (Postfix) with ESMTPS id 4CwD58649Dz9s0b
-	for <incoming@patchwork.ozlabs.org>; Tue, 15 Dec 2020 20:49:53 +1100 (AEDT)
-Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
-	by phobos.denx.de (Postfix) with ESMTP id 4EC6082956;
-	Tue, 15 Dec 2020 10:49:42 +0100 (CET)
-Authentication-Results: phobos.denx.de;
- dmarc=fail (p=none dis=none) header.from=kernel.org
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
-Received: by phobos.denx.de (Postfix, from userid 109)
- id B1A738295E; Tue, 15 Dec 2020 10:49:40 +0100 (CET)
-X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
-X-Spam-Level: 
-X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00,RCVD_IN_DNSWL_HI,
- SPF_HELO_NONE autolearn=ham autolearn_force=no version=3.4.2
-Received: from mail.kernel.org (mail.kernel.org [198.145.29.99])
- (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits))
- (No client certificate requested)
- by phobos.denx.de (Postfix) with ESMTPS id 38FB382955
- for <u-boot@lists.denx.de>; Tue, 15 Dec 2020 10:49:37 +0100 (CET)
-Authentication-Results: phobos.denx.de;
- dmarc=pass (p=none dis=none) header.from=kernel.org
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=matthias.bgg@kernel.org
-From: matthias.bgg@kernel.org
-Authentication-Results: mail.kernel.org;
- dkim=permerror (bad message/signature format)
-To: sughosh.ganu@linaro.org,
-	xypron.glpk@gmx.de
-Cc: u-boot@lists.denx.de,
-	Matthias Brugger <mbrugger@suse.com>
-Subject: [PATCH v2 1/2] rng: Add iProc RNG200 driver
-Date: Tue, 15 Dec 2020 10:49:23 +0100
-Message-Id: <20201215094924.30072-1-matthias.bgg@kernel.org>
-X-Mailer: git-send-email 2.29.2
-MIME-Version: 1.0
-X-BeenThere: u-boot@lists.denx.de
-X-Mailman-Version: 2.1.34
-Precedence: list
-List-Id: U-Boot discussion <u-boot.lists.denx.de>
-List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
-List-Archive: <https://lists.denx.de/pipermail/u-boot/>
-List-Post: <mailto:u-boot@lists.denx.de>
-List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
-List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=subscribe>
-Errors-To: u-boot-bounces@lists.denx.de
-Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
-X-Virus-Scanned: clamav-milter 0.102.3 at phobos.denx.de
-X-Virus-Status: Clean
-
-From: Matthias Brugger <mbrugger@suse.com>
-
-Add support for random number generator RNG200.
-This is for example found on RPi4.
-
-Signed-off-by: Matthias Brugger <mbrugger@suse.com>
-Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
----
-
-Changes in v2: None
-
- drivers/rng/Kconfig        |   6 ++
- drivers/rng/Makefile       |   1 +
- drivers/rng/iproc_rng200.c | 186 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 193 insertions(+)
- create mode 100644 drivers/rng/iproc_rng200.c
-
-diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig
-index 11001c8ae7..94915d45b3 100644
---- a/drivers/rng/Kconfig
-+++ b/drivers/rng/Kconfig
-@@ -46,4 +46,10 @@ config RNG_ROCKCHIP
- 	  Enable random number generator for rockchip.This driver is
- 	  support rng module of crypto v1 and crypto v2.
- 
-+config RNG_IPROC200
-+	bool "Broadcom iProc RNG200 random number generator"
-+	depends on DM_RNG
-+	default n
-+	help
-+	  Enable random number generator for RPI4.
- endif
-diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile
-index 8953406882..39f7ee3f03 100644
---- a/drivers/rng/Makefile
-+++ b/drivers/rng/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_RNG_SANDBOX) += sandbox_rng.o
- obj-$(CONFIG_RNG_MSM) += msm_rng.o
- obj-$(CONFIG_RNG_STM32MP1) += stm32mp1_rng.o
- obj-$(CONFIG_RNG_ROCKCHIP) += rockchip_rng.o
-+obj-$(CONFIG_RNG_IPROC200) += iproc_rng200.o
-diff --git a/drivers/rng/iproc_rng200.c b/drivers/rng/iproc_rng200.c
-new file mode 100644
-index 0000000000..1063f43953
---- /dev/null
-+++ b/drivers/rng/iproc_rng200.c
-@@ -0,0 +1,186 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * Copyright 2020, Matthias Brugger <mbrugger@suse.com>
-+ *
-+ * Driver for Raspberry Pi hardware random number generator
-+ */
-+
-+#include <common.h>
-+#include <dm.h>
-+#include <linux/delay.h>
-+#include <rng.h>
-+#include <asm/io.h>
-+
-+#define usleep_range(a, b) udelay((b))
-+
-+#define RNG_CTRL_OFFSET					0x00
-+#define RNG_CTRL_RNG_RBGEN_MASK				0x00001FFF
-+#define RNG_CTRL_RNG_RBGEN_ENABLE			0x00000001
-+#define RNG_CTRL_RNG_RBGEN_DISABLE			0x00000000
-+
-+#define RNG_SOFT_RESET_OFFSET				0x04
-+#define RNG_SOFT_RESET					0x00000001
-+
-+#define RBG_SOFT_RESET_OFFSET				0x08
-+#define RBG_SOFT_RESET					0x00000001
-+
-+#define RNG_INT_STATUS_OFFSET				0x18
-+#define RNG_INT_STATUS_MASTER_FAIL_LOCKOUT_IRQ_MASK	0x80000000
-+#define RNG_INT_STATUS_NIST_FAIL_IRQ_MASK		0x00000020
-+
-+#define RNG_FIFO_DATA_OFFSET				0x20
-+
-+#define RNG_FIFO_COUNT_OFFSET				0x24
-+#define RNG_FIFO_COUNT_RNG_FIFO_COUNT_MASK		0x000000FF
-+
-+struct iproc_rng200_platdata {
-+	fdt_addr_t base;
-+};
-+
-+static void iproc_rng200_enable(struct iproc_rng200_platdata *pdata, bool enable)
-+{
-+	fdt_addr_t rng_base = pdata->base;
-+	u32 val;
-+
-+	val = readl(rng_base + RNG_CTRL_OFFSET);
-+	val &= ~RNG_CTRL_RNG_RBGEN_MASK;
-+	if (enable)
-+		val |= RNG_CTRL_RNG_RBGEN_ENABLE;
-+	else
-+		val &= ~RNG_CTRL_RNG_RBGEN_ENABLE;
-+
-+	writel(val, rng_base + RNG_CTRL_OFFSET);
-+
-+}
-+
-+static void iproc_rng200_restart(struct iproc_rng200_platdata *pdata)
-+{
-+	fdt_addr_t rng_base = pdata->base;
-+	u32 val;
-+
-+	iproc_rng200_enable(pdata, false);
-+
-+	/* Clear all interrupt status */
-+	writel(0xFFFFFFFFUL, rng_base + RNG_INT_STATUS_OFFSET);
-+
-+	/* Reset RNG and RBG */
-+	val = readl(rng_base + RBG_SOFT_RESET_OFFSET);
-+	val |= RBG_SOFT_RESET;
-+	writel(val, rng_base + RBG_SOFT_RESET_OFFSET);
-+
-+	val = readl(rng_base + RNG_SOFT_RESET_OFFSET);
-+	val |= RNG_SOFT_RESET;
-+	writel(val, rng_base + RNG_SOFT_RESET_OFFSET);
-+
-+	val = readl(rng_base + RNG_SOFT_RESET_OFFSET);
-+	val &= ~RNG_SOFT_RESET;
-+	writel(val, rng_base + RNG_SOFT_RESET_OFFSET);
-+
-+	val = readl(rng_base + RBG_SOFT_RESET_OFFSET);
-+	val &= ~RBG_SOFT_RESET;
-+	writel(val, rng_base + RBG_SOFT_RESET_OFFSET);
-+
-+	iproc_rng200_enable(pdata, true);
-+}
-+
-+static int iproc_rng200_read(struct udevice *dev, void *data, size_t len)
-+{
-+	struct iproc_rng200_platdata *priv = dev_get_platdata(dev);
-+	char *buf = (char *)data;
-+	u32 num_remaining = len;
-+	u32 status;
-+
-+	#define MAX_RESETS_PER_READ	1
-+	u32 num_resets = 0;
-+
-+	while (num_remaining > 0) {
-+
-+		/* Is RNG sane? If not, reset it. */
-+		status = readl(priv->base + RNG_INT_STATUS_OFFSET);
-+		if ((status & (RNG_INT_STATUS_MASTER_FAIL_LOCKOUT_IRQ_MASK |
-+			RNG_INT_STATUS_NIST_FAIL_IRQ_MASK)) != 0) {
-+
-+			if (num_resets >= MAX_RESETS_PER_READ)
-+				return len - num_remaining;
-+
-+			iproc_rng200_restart(priv);
-+			num_resets++;
-+		}
-+
-+		/* Are there any random numbers available? */
-+		if ((readl(priv->base + RNG_FIFO_COUNT_OFFSET) &
-+				RNG_FIFO_COUNT_RNG_FIFO_COUNT_MASK) > 0) {
-+
-+			if (num_remaining >= sizeof(u32)) {
-+				/* Buffer has room to store entire word */
-+				*(u32 *)buf = readl(priv->base +
-+							RNG_FIFO_DATA_OFFSET);
-+				buf += sizeof(u32);
-+				num_remaining -= sizeof(u32);
-+			} else {
-+				/* Buffer can only store partial word */
-+				u32 rnd_number = readl(priv->base +
-+							RNG_FIFO_DATA_OFFSET);
-+				memcpy(buf, &rnd_number, num_remaining);
-+				buf += num_remaining;
-+				num_remaining = 0;
-+			}
-+
-+		} else {
-+			/* Can wait, give others chance to run */
-+			usleep_range(min(num_remaining * 10, 500U), 500);
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static int iproc_rng200_probe(struct udevice *dev)
-+{
-+	struct iproc_rng200_platdata *priv = dev_get_platdata(dev);
-+
-+	iproc_rng200_enable(priv, true);
-+
-+	return 0;
-+}
-+
-+static int iproc_rng200_remove(struct udevice *dev)
-+{
-+	struct iproc_rng200_platdata *priv = dev_get_platdata(dev);
-+
-+	iproc_rng200_enable(priv, false);
-+
-+	return 0;
-+}
-+
-+static int iproc_rng200_ofdata_to_platdata(struct udevice *dev)
-+{
-+	struct iproc_rng200_platdata *pdata = dev_get_platdata(dev);
-+
-+	pdata->base = dev_read_addr(dev);
-+	if (!pdata->base)
-+		return -ENODEV;
-+
-+	return 0;
-+}
-+
-+static const struct dm_rng_ops iproc_rng200_ops = {
-+	.read = iproc_rng200_read,
-+};
-+
-+static const struct udevice_id iproc_rng200_rng_match[] = {
-+	{ .compatible = "brcm,bcm2711-rng200", },
-+	{ .compatible = "brcm,iproc-rng200", },
-+	{},
-+};
-+
-+U_BOOT_DRIVER(iproc_rng200_rng) = {
-+	.name = "iproc_rng200-rng",
-+	.id = UCLASS_RNG,
-+	.of_match = iproc_rng200_rng_match,
-+	.ops = &iproc_rng200_ops,
-+	.probe = iproc_rng200_probe,
-+	.remove = iproc_rng200_remove,
-+	.platdata_auto_alloc_size = sizeof(struct iproc_rng200_platdata),
-+	.ofdata_to_platdata = iproc_rng200_ofdata_to_platdata,
-+};
-
-From patchwork Tue Dec 15 09:49:24 2020
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: mbrugger <matthias.bgg@kernel.org>
-X-Patchwork-Id: 1416367
-X-Patchwork-Delegate: matthias.bgg@gmail.com
-Return-Path: <u-boot-bounces@lists.denx.de>
-X-Original-To: incoming@patchwork.ozlabs.org
-Delivered-To: patchwork-incoming@bilbo.ozlabs.org
-Authentication-Results: ozlabs.org;
- spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
- (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de;
- envelope-from=u-boot-bounces@lists.denx.de; receiver=<UNKNOWN>)
-Authentication-Results: ozlabs.org;
- dmarc=fail (p=none dis=none) header.from=kernel.org
-Received: from phobos.denx.de (phobos.denx.de
- [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01])
-	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
-	 key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest
- SHA256)
-	(No client certificate requested)
-	by ozlabs.org (Postfix) with ESMTPS id 4CwD5D4Gf2z9s0b
-	for <incoming@patchwork.ozlabs.org>; Tue, 15 Dec 2020 20:50:08 +1100 (AEDT)
-Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
-	by phobos.denx.de (Postfix) with ESMTP id A25E782961;
-	Tue, 15 Dec 2020 10:49:46 +0100 (CET)
-Authentication-Results: phobos.denx.de;
- dmarc=fail (p=none dis=none) header.from=kernel.org
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
-Received: by phobos.denx.de (Postfix, from userid 109)
- id 9EC418295C; Tue, 15 Dec 2020 10:49:41 +0100 (CET)
-X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
-X-Spam-Level: 
-X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00,RCVD_IN_DNSWL_HI,
- SPF_HELO_NONE autolearn=ham autolearn_force=no version=3.4.2
-Received: from mail.kernel.org (mail.kernel.org [198.145.29.99])
- (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits))
- (No client certificate requested)
- by phobos.denx.de (Postfix) with ESMTPS id BCF5682956
- for <u-boot@lists.denx.de>; Tue, 15 Dec 2020 10:49:38 +0100 (CET)
-Authentication-Results: phobos.denx.de;
- dmarc=pass (p=none dis=none) header.from=kernel.org
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=matthias.bgg@kernel.org
-From: matthias.bgg@kernel.org
-Authentication-Results: mail.kernel.org;
- dkim=permerror (bad message/signature format)
-To: sughosh.ganu@linaro.org,
-	xypron.glpk@gmx.de
-Cc: u-boot@lists.denx.de,
-	Matthias Brugger <mbrugger@suse.com>
-Subject: [PATCH v2 2/2] config: Enable iProc RNG200 driver in RPi4 configs
-Date: Tue, 15 Dec 2020 10:49:24 +0100
-Message-Id: <20201215094924.30072-2-matthias.bgg@kernel.org>
-X-Mailer: git-send-email 2.29.2
-In-Reply-To: <20201215094924.30072-1-matthias.bgg@kernel.org>
-References: <20201215094924.30072-1-matthias.bgg@kernel.org>
-MIME-Version: 1.0
-X-BeenThere: u-boot@lists.denx.de
-X-Mailman-Version: 2.1.34
-Precedence: list
-List-Id: U-Boot discussion <u-boot.lists.denx.de>
-List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
-List-Archive: <https://lists.denx.de/pipermail/u-boot/>
-List-Post: <mailto:u-boot@lists.denx.de>
-List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
-List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=subscribe>
-Errors-To: u-boot-bounces@lists.denx.de
-Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
-X-Virus-Scanned: clamav-milter 0.102.3 at phobos.denx.de
-X-Virus-Status: Clean
-
-From: Matthias Brugger <mbrugger@suse.com>
-
-We find the iProc RNG200 in the Raspberry Pi 4. Add it to all it's
-config so that it can be used.
-
-Signed-off-by: Matthias Brugger <mbrugger@suse.com>
----
-
-Changes in v2:
-- fix defconfigs using savedefconfig (Heinrich)
-
- configs/rpi_4_32b_defconfig | 2 ++
- configs/rpi_4_defconfig     | 2 ++
- configs/rpi_arm64_defconfig | 2 ++
- drivers/rng/iproc_rng200.c  | 1 -
- 4 files changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/configs/rpi_4_32b_defconfig b/configs/rpi_4_32b_defconfig
-index 5ddd838fd5..4039e46c81 100644
---- a/configs/rpi_4_32b_defconfig
-+++ b/configs/rpi_4_32b_defconfig
-@@ -36,6 +36,8 @@ CONFIG_PCI_BRCMSTB=y
- CONFIG_PINCTRL=y
- # CONFIG_PINCTRL_GENERIC is not set
- CONFIG_DM_RESET=y
-+CONFIG_DM_RNG=y
-+CONFIG_RNG_IPROC200=y
- # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
- CONFIG_USB=y
- CONFIG_DM_USB=y
-diff --git a/configs/rpi_4_defconfig b/configs/rpi_4_defconfig
-index 2590d0a696..46b6cc3046 100644
---- a/configs/rpi_4_defconfig
-+++ b/configs/rpi_4_defconfig
-@@ -36,6 +36,8 @@ CONFIG_PCI_BRCMSTB=y
- CONFIG_PINCTRL=y
- # CONFIG_PINCTRL_GENERIC is not set
- CONFIG_DM_RESET=y
-+CONFIG_DM_RNG=y
-+CONFIG_RNG_IPROC200=y
- # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
- CONFIG_USB=y
- CONFIG_DM_USB=y
-diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig
-index 2639219a1a..b75144036d 100644
---- a/configs/rpi_arm64_defconfig
-+++ b/configs/rpi_arm64_defconfig
-@@ -33,6 +33,8 @@ CONFIG_PCI_BRCMSTB=y
- CONFIG_PINCTRL=y
- # CONFIG_PINCTRL_GENERIC is not set
- CONFIG_DM_RESET=y
-+CONFIG_DM_RNG=y
-+CONFIG_RNG_IPROC200=y
- # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
- CONFIG_USB=y
- CONFIG_DM_USB=y
-diff --git a/drivers/rng/iproc_rng200.c b/drivers/rng/iproc_rng200.c
-index 1063f43953..378f6cf48d 100644
---- a/drivers/rng/iproc_rng200.c
-+++ b/drivers/rng/iproc_rng200.c
-@@ -50,7 +50,6 @@ static void iproc_rng200_enable(struct iproc_rng200_platdata *pdata, bool enable
- 		val &= ~RNG_CTRL_RNG_RBGEN_ENABLE;
- 
- 	writel(val, rng_base + RNG_CTRL_OFFSET);
--
- }
- 
- static void iproc_rng200_restart(struct iproc_rng200_platdata *pdata)

rockchip-spl-u-boot-itb-offset.patch

@@ -1,11 +0,0 @@
---- u-boot-2020.10/common/spl/Kconfig.orig	2020-10-07 12:08:54.972632715 +0100
-+++ u-boot-2020.10/common/spl/Kconfig	2020-10-07 12:08:59.100672506 +0100
-@@ -324,7 +324,7 @@
- 	default 0x200 if ARCH_SOCFPGA || ARCH_AT91
- 	default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \
- 		         OMAP54XX || AM33XX || AM43XX || ARCH_K3
--	default 0x4000 if ARCH_ROCKCHIP
-+	default 0x200 if ARCH_ROCKCHIP
- 	default 0x822 if TARGET_SIFIVE_FU540
- 	help
- 	  Address on the MMC to load U-Boot from, when the MMC is being used

rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch

@@ -1,96 +0,0 @@
-From f10f94831450671a77f61fe413b4a57459963860 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Mon, 10 Aug 2020 22:20:29 +0100
-Subject: [PATCH] rpi: Use firmware provided device tree
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- configs/rpi_0_w_defconfig      | 2 +-
- configs/rpi_2_defconfig        | 2 +-
- configs/rpi_3_32b_defconfig    | 2 +-
- configs/rpi_3_b_plus_defconfig | 2 +-
- configs/rpi_3_defconfig        | 2 +-
- configs/rpi_defconfig          | 2 +-
- 6 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig
-index bba5e12b12..0241f4c6d3 100644
---- a/configs/rpi_0_w_defconfig
-+++ b/configs/rpi_0_w_defconfig
-@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
- CONFIG_CMD_MMC=y
- CONFIG_CMD_USB=y
- CONFIG_CMD_FS_UUID=y
--CONFIG_OF_EMBED=y
-+CONFIG_OF_BOARD=y
- CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
-index 1c2bbb29ce..9573e475f4 100644
---- a/configs/rpi_2_defconfig
-+++ b/configs/rpi_2_defconfig
-@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
- CONFIG_CMD_MMC=y
- CONFIG_CMD_USB=y
- CONFIG_CMD_FS_UUID=y
--CONFIG_OF_EMBED=y
-+CONFIG_OF_BOARD=y
- CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
-index b8a3d17f43..252df994e6 100644
---- a/configs/rpi_3_32b_defconfig
-+++ b/configs/rpi_3_32b_defconfig
-@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
- CONFIG_CMD_MMC=y
- CONFIG_CMD_USB=y
- CONFIG_CMD_FS_UUID=y
--CONFIG_OF_EMBED=y
-+CONFIG_OF_BOARD=y
- CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-diff --git a/configs/rpi_3_b_plus_defconfig b/configs/rpi_3_b_plus_defconfig
-index 4c361438fa..3b2996a2f9 100644
---- a/configs/rpi_3_b_plus_defconfig
-+++ b/configs/rpi_3_b_plus_defconfig
-@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
- CONFIG_CMD_MMC=y
- CONFIG_CMD_USB=y
- CONFIG_CMD_FS_UUID=y
--CONFIG_OF_EMBED=y
-+CONFIG_OF_BOARD=y
- CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
-index 9b281a4f15..1e9ee6122e 100644
---- a/configs/rpi_3_defconfig
-+++ b/configs/rpi_3_defconfig
-@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
- CONFIG_CMD_MMC=y
- CONFIG_CMD_USB=y
- CONFIG_CMD_FS_UUID=y
--CONFIG_OF_EMBED=y
-+CONFIG_OF_BOARD=y
- CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
-index b5ad53c37b..223fc03275 100644
---- a/configs/rpi_defconfig
-+++ b/configs/rpi_defconfig
-@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
- CONFIG_CMD_MMC=y
- CONFIG_CMD_USB=y
- CONFIG_CMD_FS_UUID=y
--CONFIG_OF_EMBED=y
-+CONFIG_OF_BOARD=y
- CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
- CONFIG_SYS_RELOC_GD_ENV_ADDR=y
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
--- 
-2.26.2
-

sources

@@ -1 +1 @@
-SHA512 (u-boot-2021.01-rc4.tar.bz2) = 6de2c60d02276f4eed31b5baf2d8239ad0af30c9d341339a4cd7fa0786068cb5faa1ab8bd0b4155e536962e1a4869906f60f1d2a1e50b0ed15e98c2e84d6a97b
+61c628f8034477c946e173ed174efeb4  u-boot-2016.09.01.tar.bz2

sunxi-add-PineCube-board.patch

@@ -1,222 +0,0 @@
-From patchwork Wed Nov 18 10:27:17 2020
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Icenowy Zheng <icenowy@aosc.io>
-X-Patchwork-Id: 1402159
-X-Patchwork-Delegate: andre.przywara@arm.com
-Return-Path: <u-boot-bounces@lists.denx.de>
-X-Original-To: incoming@patchwork.ozlabs.org
-Delivered-To: patchwork-incoming@bilbo.ozlabs.org
-Authentication-Results: ozlabs.org;
- spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
- (client-ip=85.214.62.61; helo=phobos.denx.de;
- envelope-from=u-boot-bounces@lists.denx.de; receiver=<UNKNOWN>)
-Authentication-Results: ozlabs.org;
- dmarc=none (p=none dis=none) header.from=aosc.io
-Authentication-Results: ozlabs.org;
-	dkim=fail reason="signature verification failed" (1024-bit key;
- unprotected) header.d=mymailcheap.com header.i=@mymailcheap.com
- header.a=rsa-sha256 header.s=default header.b=YYrkSpBD;
-	dkim=fail reason="signature verification failed" (1024-bit key;
- unprotected) header.d=aosc.io header.i=@aosc.io header.a=rsa-sha256
- header.s=default header.b=o7lHQ4SZ;
-	dkim-atps=neutral
-Received: from phobos.denx.de (phobos.denx.de [85.214.62.61])
-	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
-	 key-exchange X25519 server-signature RSA-PSS (4096 bits))
-	(No client certificate requested)
-	by ozlabs.org (Postfix) with ESMTPS id 4CbfCp3G62z9s1l
-	for <incoming@patchwork.ozlabs.org>; Wed, 18 Nov 2020 21:28:22 +1100 (AEDT)
-Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
-	by phobos.denx.de (Postfix) with ESMTP id 00D6D82304;
-	Wed, 18 Nov 2020 11:28:16 +0100 (CET)
-Authentication-Results: phobos.denx.de;
- dmarc=none (p=none dis=none) header.from=aosc.io
-Authentication-Results: phobos.denx.de;
- spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
-Authentication-Results: phobos.denx.de;
-	dkim=fail reason="signature verification failed" (1024-bit key;
- unprotected) header.d=mymailcheap.com header.i=@mymailcheap.com
- header.b="YYrkSpBD";
-	dkim=fail reason="signature verification failed" (1024-bit key;
- unprotected) header.d=aosc.io header.i=@aosc.io header.b="o7lHQ4SZ";
-	dkim-atps=neutral
-Received: by phobos.denx.de (Postfix, from userid 109)
- id 2E5B282309; Wed, 18 Nov 2020 11:28:11 +0100 (CET)
-X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
-X-Spam-Level: 
-X-Spam-Status: No, score=-2.0 required=5.0 tests=BAYES_00,DKIM_SIGNED,
- DKIM_VALID,DKIM_VALID_AU,SPF_HELO_NONE,URIBL_BLOCKED autolearn=ham
- autolearn_force=no version=3.4.2
-Received: from relay1.mymailcheap.com (relay1.mymailcheap.com
- [144.217.248.100])
- (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits))
- (No client certificate requested)
- by phobos.denx.de (Postfix) with ESMTPS id EC082808F1
- for <u-boot@lists.denx.de>; Wed, 18 Nov 2020 11:28:05 +0100 (CET)
-Authentication-Results: phobos.denx.de;
- dmarc=none (p=none dis=none) header.from=aosc.io
-Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=icenowy@aosc.io
-Received: from filter2.mymailcheap.com (filter2.mymailcheap.com
- [91.134.140.82])
- by relay1.mymailcheap.com (Postfix) with ESMTPS id 18A423F201;
- Wed, 18 Nov 2020 10:27:59 +0000 (UTC)
-Received: from localhost (localhost [127.0.0.1])
- by filter2.mymailcheap.com (Postfix) with ESMTP id 6377C2A7E9;
- Wed, 18 Nov 2020 11:27:58 +0100 (CET)
-DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=mymailcheap.com;
- s=default; t=1605695278;
- bh=vA5tPn4fjpXJj/OQnRg+m708mrodc5u5TJSDVOSBnHo=;
- h=From:To:Cc:Subject:Date:From;
- b=YYrkSpBDGdpkLi16yGwNw7yMTXXW566rTdXX2RSRxCe6FylY99qiYDmZR+PZFqCX0
- t3yDL0nO6zMKUvJVqZaTwsroyblAKNCaLz1AfCURNqCwohtJcIkDsegRYz9slzT9Qu
- BQkTT6dosAIQFtAVrc48QBX38eHXMYreqkbHXz5g=
-Received: from filter2.mymailcheap.com ([127.0.0.1])
- by localhost (filter2.mymailcheap.com [127.0.0.1]) (amavisd-new, port 10024)
- with ESMTP id eCMZCx2FVDgE; Wed, 18 Nov 2020 11:27:57 +0100 (CET)
-Received: from mail20.mymailcheap.com (mail20.mymailcheap.com [51.83.111.147])
- (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits))
- (No client certificate requested)
- by filter2.mymailcheap.com (Postfix) with ESMTPS;
- Wed, 18 Nov 2020 11:27:57 +0100 (CET)
-Received: from [213.133.102.83] (ml.mymailcheap.com [213.133.102.83])
- by mail20.mymailcheap.com (Postfix) with ESMTP id A597A400BE;
- Wed, 18 Nov 2020 10:27:56 +0000 (UTC)
-Authentication-Results: mail20.mymailcheap.com; dkim=pass (1024-bit key;
- unprotected) header.d=aosc.io header.i=@aosc.io header.b="o7lHQ4SZ";
- dkim-atps=neutral
-AI-Spam-Status: Not processed
-Received: from ice-e5v2.lan (unknown [59.41.160.51])
- (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
- key-exchange ECDHE (P-256) server-signature RSA-PSS (2048 bits) server-digest
- SHA256) (No client certificate requested)
- by mail20.mymailcheap.com (Postfix) with ESMTPSA id 3B979400BE;
- Wed, 18 Nov 2020 10:27:45 +0000 (UTC)
-DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=aosc.io; s=default;
- t=1605695270; bh=vA5tPn4fjpXJj/OQnRg+m708mrodc5u5TJSDVOSBnHo=;
- h=From:To:Cc:Subject:Date:From;
- b=o7lHQ4SZ+kcNlSGrF+USzZxRQhtIEcZFQPjvsiu+MiK+TTjArUzo5bRKHH0I4ZcDM
- a4Ywg6IcctT99QEZGbRIHqhvjH6/Kvj4lWM77Bb0DrlHXfEdOj3LC7KiAF1vVGFfPI
- 0oTEacf71O2OWPmQBqEH/uaV/IiGI4rZvgWiMPkk=
-From: Icenowy Zheng <icenowy@aosc.io>
-To: Jagan Teki <jagan@amarulasolutions.com>,
- Andre Przywara <andre.przywara@arm.com>,
- Hans de Goede <hdegoede@redhat.com>
-Cc: u-boot@lists.denx.de, linux-sunxi@googlegroups.com,
- Icenowy Zheng <icenowy@aosc.io>
-Subject: [PATCH v3] sunxi: add PineCube board
-Date: Wed, 18 Nov 2020 18:27:17 +0800
-Message-Id: <20201118102717.635129-1-icenowy@aosc.io>
-X-Mailer: git-send-email 2.28.0
-MIME-Version: 1.0
-X-Rspamd-Queue-Id: A597A400BE
-X-Spamd-Result: default: False [4.90 / 20.00]; RCVD_VIA_SMTP_AUTH(0.00)[];
- ARC_NA(0.00)[]; R_DKIM_ALLOW(0.00)[aosc.io:s=default];
- RECEIVED_SPAMHAUS_PBL(0.00)[59.41.160.51:received];
- FROM_HAS_DN(0.00)[]; TO_DN_SOME(0.00)[];
- R_MISSING_CHARSET(2.50)[]; TO_MATCH_ENVRCPT_ALL(0.00)[];
- MIME_GOOD(-0.10)[text/plain]; DMARC_NA(0.00)[aosc.io];
- BROKEN_CONTENT_TYPE(1.50)[]; R_SPF_SOFTFAIL(0.00)[~all];
- RCPT_COUNT_FIVE(0.00)[6]; ML_SERVERS(-3.10)[213.133.102.83];
- DKIM_TRACE(0.00)[aosc.io:+]; MID_CONTAINS_FROM(1.00)[];
- RCVD_NO_TLS_LAST(0.10)[]; FROM_EQ_ENVFROM(0.00)[];
- MIME_TRACE(0.00)[0:+];
- ASN(0.00)[asn:24940, ipnet:213.133.96.0/19, country:DE];
- RCVD_COUNT_TWO(0.00)[2];
- HFILTER_HELO_BAREIP(3.00)[213.133.102.83,1]
-X-Rspamd-Server: mail20.mymailcheap.com
-X-BeenThere: u-boot@lists.denx.de
-X-Mailman-Version: 2.1.34
-Precedence: list
-List-Id: U-Boot discussion <u-boot.lists.denx.de>
-List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
-List-Archive: <https://lists.denx.de/pipermail/u-boot/>
-List-Post: <mailto:u-boot@lists.denx.de>
-List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
-List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
- <mailto:u-boot-request@lists.denx.de?subject=subscribe>
-Errors-To: u-boot-bounces@lists.denx.de
-Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
-X-Virus-Scanned: clamav-milter 0.102.3 at phobos.denx.de
-X-Virus-Status: Clean
-
-PineCube is an IP camera development kit released by Pine64.
-
-It comes with the following compoents:
-
-- A mainboard with Sochip S3 SoC, a 16MByte SPI Flash, AXP209 PMIC,
-a power-only microUSB connector, a USB Type-A connector, a 10/100Mbps
-Ethernet port and FPC connectors for camera and daughter board.
-- An OV5640-based camera module which is connected to the parallel CSI
-bus of the mainboard.
-- A daughterboard with several buttons, a SD slot, some IR LEDs, a
-microphone and a speaker connector.
-
-As the device tree is synchronized in a previous commit, just add it to
-Makefile, create a new MAINTAINER item and provide a defconfig.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
-Reviewed-by: Andre Przywara <andre.przywara@arm.com>
----
-Changes since v2:
-- Add Makefile reference to DT.
-Changes since v1:
-- Dropped LDO3 quirk.
-
- arch/arm/dts/Makefile      |  1 +
- board/sunxi/MAINTAINERS    |  5 +++++
- configs/pinecube_defconfig | 15 +++++++++++++++
- 3 files changed, 21 insertions(+)
- create mode 100644 configs/pinecube_defconfig
-
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 7d1a369845..e6993733b0 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -587,6 +587,7 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \
- 	sun8i-r40-bananapi-m2-ultra.dtb \
- 	sun8i-v40-bananapi-m2-berry.dtb
- dtb-$(CONFIG_MACH_SUN8I_V3S) += \
-+	sun8i-s3-pinecube.dtb \
- 	sun8i-v3s-licheepi-zero.dtb
- dtb-$(CONFIG_MACH_SUN50I_H5) += \
- 	sun50i-h5-bananapi-m2-plus.dtb \
-diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
-index d3755ae41a..735801ae1d 100644
---- a/board/sunxi/MAINTAINERS
-+++ b/board/sunxi/MAINTAINERS
-@@ -440,6 +440,11 @@ M:	Vasily Khoruzhick <anarsoul@gmail.com>
- S:	Maintained
- F:	configs/pinebook_defconfig
- 
-+PINECUBE BOARD:
-+M:	Icenowy Zheng <icenowy@aosc.io>
-+S:	Maintained
-+F:	configs/pinecube_defconfig
-+
- PINE64 BOARDS
- M:	Andre Przywara <andre.przywara@arm.com>
- S:	Maintained
-diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig
-new file mode 100644
-index 0000000000..a8c404f6b1
---- /dev/null
-+++ b/configs/pinecube_defconfig
-@@ -0,0 +1,15 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN8I_V3S=y
-+CONFIG_SUNXI_DRAM_DDR3_1333=y
-+CONFIG_DRAM_CLK=504
-+CONFIG_DRAM_ODT_EN=y
-+CONFIG_I2C0_ENABLE=y
-+CONFIG_DEFAULT_DEVICE_TREE="sun8i-s3-pinecube"
-+CONFIG_SPL_I2C_SUPPORT=y
-+# CONFIG_NETDEVICES is not set
-+CONFIG_AXP209_POWER=y
-+CONFIG_AXP_DCDC2_VOLT=1250
-+CONFIG_AXP_DCDC3_VOLT=3300
-+CONFIG_CONS_INDEX=3

uboot-tools.spec

@@ -1,68 +1,29 @@
-%global candidate rc4
+#global candidate rc2
 
-Name:     uboot-tools
-Version:  2021.01
-Release:  0.4%{?candidate:.%{candidate}}%{?dist}
-Summary:  U-Boot utilities
-License:  GPLv2+ BSD LGPL-2.1+ LGPL-2.0+
-URL:      http://www.denx.de/wiki/U-Boot
+Name:      uboot-tools
+Version:   2016.09.01
+Release:   2%{?candidate:.%{candidate}}%{?dist}
+Summary:   U-Boot utilities
 
-Source0:  ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}%{?candidate:-%{candidate}}.tar.bz2
-Source1:  arm-boards
-Source2:  arm-chromebooks
-Source3:  aarch64-boards
-Source4:  aarch64-chromebooks
+Group:     Development/Tools
+License:   GPLv2+ BSD LGPL-2.1+ LGPL-2.0+
+URL:       http://www.denx.de/wiki/U-Boot
+Source0:   ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}%{?candidate:-%{candidate}}.tar.bz2
+Source1:   armv7-boards
+Source2:   armv8-boards
 
-# Fedoraisms patches
-# Needed to find DT on boot partition that's not the first partition
-Patch1:   uefi-distro-load-FDT-from-any-partition-on-boot-device.patch
-# Needed due to issues with shim
-Patch2:   uefi-use-Fedora-specific-path-name.patch
-# RPi - uses RPI firmware device tree for HAT support
-Patch3:   rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch
-# Ajust the U-Boot offsets in SPL to take less space
-#Patch4:   rockchip-spl-u-boot-itb-offset.patch
-
-# Board fixes and enablement
-Patch5:   Raspberry-Pi-400-Compute-Module-4-support.patch
-Patch6:   rng-Add-iProc-RNG200-driver.patch
-# AllWinner improvements
-Patch10:  AllWinner-PineTab.patch
-Patch11:  sunxi-add-PineCube-board.patch
-Patch12:  0001-Fixes-for-AllWinner-ethernet-network-interfaces.patch
-# TI fixes
-Patch13:  0001-Fix-BeagleAI-detection.patch
-# Rockchips improvements
-Patch14:  arm-rk3399-enable-rng-on-rock960-and-firefly3399.patch
-Patch15:  rk3399-Pinebook-pro-EDP-support.patch
+Patch1:    add-BOOTENV_INIT_COMMAND-for-commands-that-may-be-ne.patch
+Patch2:    port-utilite-to-distro-generic-boot-commands.patch
+Patch3:    mvebu-enable-generic-distro-boot-config.patch
+Patch4:    fix-ext4-64bit.patch
 
 BuildRequires:  bc
 BuildRequires:  dtc
-BuildRequires:  make
-# Requirements for building on el7
-%if 0%{?rhel} == 7
-BuildRequires:  devtoolset-7-build
-BuildRequires:  devtoolset-7-binutils
-BuildRequires:  devtoolset-7-gcc
-BuildRequires:  python2-devel
-BuildRequires:  python2-setuptools
-BuildRequires:  python2-libfdt
-%else
-BuildRequires:  gcc
-BuildRequires:  python3-devel
-BuildRequires:  python3-setuptools
-BuildRequires:  python3-libfdt
-%endif
-BuildRequires:  flex bison
+BuildRequires:  fedora-logos
+BuildRequires:  git
+BuildRequires:  netpbm-progs
 BuildRequires:  openssl-devel
 BuildRequires:  SDL-devel
-BuildRequires:  swig
-%ifarch %{arm} aarch64
-BuildRequires:  vboot-utils
-%endif
-%ifarch aarch64
-BuildRequires:  arm-trusted-firmware-armv8
-%endif
 Requires:       dtc
 
 %description
@@ -71,70 +32,78 @@ and fw_printenv/fw_setenv for manipulating the boot environment variables.
 
 %ifarch aarch64
 %package     -n uboot-images-armv8
-Summary:     U-Boot firmware images for aarch64 boards
+Summary:     u-boot bootloader images for armv8 boards
+Requires:    uboot-tools
 BuildArch:   noarch
 
 %description -n uboot-images-armv8
-U-Boot firmware binaries for aarch64 boards
+u-boot bootloader binaries for the aarch64 vexpress_aemv8a
 %endif
 
 %ifarch %{arm}
 %package     -n uboot-images-armv7
-Summary:     U-Boot firmware images for armv7 boards
+Summary:     u-boot bootloader images for armv7 boards
+Requires:    uboot-tools
 BuildArch:   noarch
 
 %description -n uboot-images-armv7
-U-Boot firmware binaries for armv7 boards
+u-boot bootloader binaries for armv7 boards
+%endif
+
+%ifarch %{arm} aarch64
+%package     -n uboot-images-qemu
+Summary:     u-boot bootloader images for armv7 boards
+Requires:    uboot-tools
+
+%description -n uboot-images-qemu
+u-boot bootloader ELF binaries for use with qemu
 %endif
 
 %prep
-%autosetup -p1 -n u-boot-%{version}%{?candidate:-%{candidate}}
+%setup -q -n u-boot-%{version}%{?candidate:-%{candidate}}
 
-cp %SOURCE1 %SOURCE2 %SOURCE3 %SOURCE4 .
+git init
+git config --global gc.auto 0
+git config user.email "noone@example.com" 
+git config user.name "no one" 
+git add . 
+git commit -a -q -m "%{version} baseline" 
+git am %{patches} </dev/null 
+git config --unset user.email 
+git config --unset user.name 
+rm -rf .git
 
 %build
 mkdir builds
+# convert fedora logo to bmp for use in u-boot
+# pngtopnm /usr/share/pixmaps/fedora-logo.png | ppmquant 256 | ppmtobmp -bpp 8 >fedora.bmp
 
-%if 0%{?rhel} == 7
-#Enabling DTS for .el7
-%{?enable_devtoolset7:%{enable_devtoolset7}}
-%endif
+#replace the logos with fedora's
+#for bmp in tools/logos/*bmp
+#do
+#cp fedora.bmp $bmp
+#done
 
-%ifarch aarch64 %{arm}
-for board in $(cat %{_arch}-boards)
+%ifarch aarch64
+for board in $(cat %SOURCE2)
 do
-  echo "Building board: $board"
-  mkdir builds/$(echo $board)/
-  # ATF selection, needs improving, suggestions of ATF SoC to Board matrix welcome
-  sun50i=(a64-olinuxino amarula_a64_relic bananapi_m2_plus_h5 bananapi_m64 libretech_all_h3_cc_h5 nanopi_a64 nanopi_neo2 nanopi_neo_plus2 orangepi_pc2 orangepi_prime orangepi_win orangepi_zero_plus orangepi_zero_plus2 pine64-lts pine64_plus pinebook pinephone pinetab sopine_baseboard teres_i)
-  if [[ " ${sun50i[*]} " == *" $board "* ]]; then
-    echo "Board: $board using sun50i_a64"
-    cp /usr/share/arm-trusted-firmware/sun50i_a64/* builds/$(echo $board)/
-  fi
-  sun50h6=(orangepi_lite2 orangepi_one_plus pine_h64)
-  if [[ " ${sun50h6[*]} " == *" $board "* ]]; then
-    echo "Board: $board using sun50i_h6"
-    cp /usr/share/arm-trusted-firmware/sun50i_h6/* builds/$(echo $board)/
-  fi
-  rk3328=(evb-rk3328 rock64-rk3328 rock-pi-e-rk3328 roc-cc-rk3328)
-  if [[ " ${rk3328[*]} " == *" $board "* ]]; then
-    echo "Board: $board using rk3328"
-    cp /usr/share/arm-trusted-firmware/rk3328/* builds/$(echo $board)/
-  fi
-  rk3399=(evb-rk3399 ficus-rk3399 firefly-rk3399 khadas-edge-captain-rk3399 khadas-edge-rk3399 khadas-edge-v-rk3399 nanopc-t4-rk3399 nanopi-m4-2gb-rk3399 nanopi-m4-rk3399 nanopi-neo4-rk3399 orangepi-rk3399 pinebook-pro-rk3399 puma-rk3399 rock960-rk3399 rock-pi-4c-rk3399 rock-pi-4-rk3399 rock-pi-n10-rk3399pro rockpro64-rk3399 roc-pc-mezzanine-rk3399 roc-pc-rk3399)
-  if [[ " ${rk3399[*]} " == *" $board "* ]]; then
-    echo "Board: $board using rk3399"
-    cp /usr/share/arm-trusted-firmware/rk3399/* builds/$(echo $board)/
-  fi
-  # End ATF
-  make $(echo $board)_defconfig O=builds/$(echo $board)/
-  %make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" O=builds/$(echo $board)/
+make $(echo $board)_defconfig O=builds/$(echo $board)/
+make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 O=builds/$(echo $board)/
 done
 
 %endif
 
-%make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" tools-only_defconfig O=builds/
-%make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" tools-all O=builds/
+%ifarch %{arm}
+for board in $(cat %SOURCE1)
+do
+make $(echo $board)_defconfig V=1 O=builds/$(echo $board)/
+make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" %{?_smp_mflags} V=1 O=builds/$(echo $board)/
+done
+
+%endif
+
+make HOSTCC="gcc $RPM_OPT_FLAGS" %{?_smp_mflags} CROSS_COMPILE="" defconfig V=1 O=builds/
+make HOSTCC="gcc $RPM_OPT_FLAGS" %{?_smp_mflags} CROSS_COMPILE="" tools-all V=1 O=builds/
 
 %install
 mkdir -p $RPM_BUILD_ROOT%{_bindir}
@@ -143,10 +112,10 @@ mkdir -p $RPM_BUILD_ROOT%{_mandir}/man1
 mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/
 
 %ifarch aarch64
-for board in $(cat %{_arch}-boards)
+for board in $(cat %SOURCE2)
 do
 mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
- for file in u-boot.bin u-boot.dtb u-boot.img u-boot-dtb.img u-boot.itb u-boot-sunxi-with-spl.bin u-boot-rockchip.bin idbloader.img spl/boot.bin spl/sunxi-spl.bin
+ for file in MLO SPL spl/*spl.bin u-boot.bin u-boot.dtb u-boot-dtb-tegra.bin u-boot.img u-boot.imx u-boot-nodtb-tegra.bin u-boot-spl.kwb u-boot-sunxi-with-spl.bin
  do
   if [ -f builds/$(echo $board)/$(echo $file) ]; then
     install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
@@ -156,10 +125,10 @@ done
 %endif
 
 %ifarch %{arm}
-for board in $(cat %{_arch}-boards)
+for board in $(cat %SOURCE1)
 do
 mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
- for file in MLO SPL spl/arndale-spl.bin spl/origen-spl.bin spl/*spl.bin u-boot.bin u-boot.dtb u-boot-dtb-tegra.bin u-boot.img u-boot.imx u-boot-spl.kwb u-boot-rockchip.bin u-boot-sunxi-with-spl.bin spl/boot.bin
+ for file in MLO SPL spl/arndale-spl.bin spl/origen-spl.bin spl/smdkv310-spl.bin spl/*spl.bin u-boot.bin u-boot.dtb u-boot-dtb-tegra.bin u-boot.img u-boot.imx u-boot-nodtb-tegra.bin u-boot-spl.kwb u-boot-sunxi-with-spl.bin
  do
   if [ -f builds/$(echo $board)/$(echo $file) ]; then
     install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
@@ -169,7 +138,7 @@ mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
 done
 
 # Bit of a hack to remove binaries we don't use as they're large
-for board in $(cat %{_arch}-boards)
+for board in $(cat %SOURCE1)
 do
   if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot-sunxi-with-spl.bin ]; then
     rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.*
@@ -186,7 +155,47 @@ do
 done
 %endif
 
-for tool in bmp_logo dumpimage env/fw_printenv fit_check_sign fit_info gdb/gdbcont gdb/gdbsend gen_eth_addr gen_ethaddr_crc img2srec mkenvimage mkimage mksunxiboot ncb proftool sunxi-spl-image-builder ubsha1 xway-swap-bytes
+%ifarch aarch64
+for board in $(cat %SOURCE2)
+do
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
+ for file in MLO SPL spl/arndale-spl.bin spl/origen-spl.bin spl/smdkv310-spl.bin u-boot.bin u-boot.dtb u-boot-dtb-tegra.bin u-boot.img u-boot.imx u-boot-nodtb-tegra.bin u-boot-spl.kwb u-boot-sunxi-with-spl.bin
+ do
+  if [ -f builds/$(echo $board)/$(echo $file) ]; then
+    install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
+  fi
+ done
+done
+%endif
+
+# QEMU ELF binaries
+%ifarch %{arm}
+for board in vexpress_ca15_tc2 vexpress_ca9x4
+do
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/qemu/$(echo $board)/
+ for file in u-boot
+ do
+  if [ -f builds/$(echo $board)/$(echo $file) ]; then
+    install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/qemu/$(echo $board)/
+  fi
+ done
+done
+%endif
+
+%ifarch aarch64
+for board in vexpress_aemv8a_semi
+do
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/qemu/$(echo $board)/
+ for file in u-boot
+ do
+  if [ -f builds/$(echo $board)/$(echo $file) ]; then
+    install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/qemu/$(echo $board)/
+  fi
+ done
+done
+%endif
+
+for tool in bmp_logo dumpimage easylogo/easylogo env/fw_printenv fit_check_sign fit_info gdb/gdbcont gdb/gdbsend gen_eth_addr img2srec mkenvimage mkimage ncb proftool ubsha1 xway-swap-bytes
 do
 install -p -m 0755 builds/tools/$tool $RPM_BUILD_ROOT%{_bindir}
 done
@@ -198,27 +207,22 @@ install -p -m 0755 builds/tools/env/fw_printenv $RPM_BUILD_ROOT%{_bindir}
 install -p -m 0644 tools/env/fw_env.config $RPM_BUILD_ROOT%{_sysconfdir}
 
 # Copy sone useful docs over
-mkdir -p builds/docs
-cp -p board/hisilicon/hikey/README builds/docs/README.hikey
-cp -p board/hisilicon/hikey/README builds/docs/README.hikey
-cp -p board/Marvell/db-88f6820-gp/README builds/docs/README.mvebu-db-88f6820
-cp -p board/rockchip/evb_rk3399/README builds/docs/README.evb_rk3399
-cp -p board/solidrun/clearfog/README builds/docs/README.clearfog
-cp -p board/solidrun/mx6cuboxi/README builds/docs/README.mx6cuboxi
-cp -p board/sunxi/README.sunxi64 builds/docs/README.sunxi64
-cp -p board/sunxi/README.nand builds/docs/README.sunxi-nand
-cp -p board/ti/am335x/README builds/docs/README.am335x
-cp -p board/ti/omap5_uevm/README builds/docs/README.omap5_uevm
-cp -p board/udoo/README builds/docs/README.udoo
-cp -p board/wandboard/README builds/docs/README.wandboard
-cp -p board/warp/README builds/docs/README.warp
-cp -p board/warp7/README builds/docs/README.warp7
+cp -p board/ti/am335x/README doc/README.am335x
+cp -p board/ti/omap5_uevm/README doc/README.omap5_uevm
+cp -p board/wandboard/README doc/README.wandboard
+cp -p board/hisilicon/hikey/README doc/README.hikey
+cp -p board/warp/README doc/README.warp
+cp -p board/sunxi/README.pine64 doc/README.pine64
+cp -p board/solidrun/clearfog/README doc/README.clearfog
+cp -p board/solidrun/mx6cuboxi/README doc/README.mx6cuboxi
+cp -p board/amlogic/odroid-c2/README doc/README.odroid-c2
 
 %files
-%doc README doc/README.kwbimage doc/README.distro doc/README.gpt
-%doc doc/README.odroid doc/README.rockchip doc/uefi doc/uImage.FIT doc/arch/arm64.rst
-%doc doc/README.chromium builds/docs/*
-%doc doc/board/amlogic/ doc/board/rockchip/
+%doc README doc/README.imximage doc/README.kwbimage doc/README.distro doc/README.gpt
+%doc doc/README.odroid doc/README.rockchip doc/README.efi doc/uImage.FIT
+%doc doc/README.am335x doc/README.omap5_uevm doc/README.wandboard doc/README.hikey
+%doc doc/README.warp doc/README.pine64 doc/README.clearfog doc/README.mx6cuboxi
+%doc doc/README.odroid-c2
 %{_bindir}/*
 %{_mandir}/man1/mkimage.1*
 %dir %{_datadir}/uboot/
@@ -227,123 +231,470 @@ cp -p board/warp7/README builds/docs/README.warp7
 %ifarch aarch64
 %files -n uboot-images-armv8
 %{_datadir}/uboot/*
+%exclude %{_datadir}/uboot/qemu
 %endif
 
 %ifarch %{arm}
 %files -n uboot-images-armv7
 %{_datadir}/uboot/*
+%exclude %{_datadir}/uboot/qemu
+%endif
+
+%ifarch %{arm} aarch64
+%files -n uboot-images-qemu
+%{_datadir}/uboot/qemu
 %endif
 
 %changelog
-* Sun Dec 27 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.4.rc4
-- Update to 2021.01 RC4
-- Latest RPi-400/CM4 support patch
+* Wed Oct 19 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.09.01-2
+- Add upstream ext4 patches to fix 64 bit feature issues with u-boot and /boot
 
-* Tue Dec 15 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.3.rc3
-- Update to 2021.01 RC3
-- Latest RPi-400/CM4 support patch
-- Re-enable previously disabled device support
+* Tue Sep 20 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.09.01-1
+- Update to 2016.09.01 GA
 
-* Mon Dec 14 2020 Javier Martinez Canillas <javierm@redhat.com> - 2021.01-0.2.rc2
-- Fix a "scan_dev_for_efi" not defined error
+* Mon Sep 12 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.09-3
+- Update to 2016.09 GA
+- Add qemu elf binaries to new subpackage
 
-* Sun Nov 22 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.1.rc2
-- Update to 2021.01 RC2
-- Latest Pinebook Pro display patches
-- Initial RPi-400 support patch
-- Update Fedora specific patches
+* Tue Aug 23 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.09-2rc2
+- 2016.09 RC2
 
-* Sun Nov  8 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-3
-- Fix SPI on Rockchip devices
-- Latest Pinebook Pro display patches
-- Fix Keyboard and USB-A ports on Pinebook Pro
+* Wed Jul 27 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.09-1rc1
+- 2016.09 RC1
 
-* Wed Oct 28 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-2
-- Fix kernel installs for non EBBR systems
-- Fix for wired networks on some Allwinner devices
+* Tue Jul 12 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.07-1
+- Update to 2016.07 GA
 
-* Tue Oct 06 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-1
-- Update to 2020.10
+* Thu Jul  7 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.07-0.4rc3
+- Minor updates and cleanups
 
-* Sun Sep 27 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.6.rc5
-- Initial support for display output on Pinebook Pro
+* Tue Jul  5 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.07-0.3rc3
+- 2016.07 RC3
 
-* Tue Sep 22 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.5.rc5
-- Update to 2020.10 RC5
+* Tue Jun 21 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.07-0.2rc2
+- 2016.07 RC2
 
-* Wed Sep 09 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.4.rc4
-- Update to 2020.10 RC4
+* Tue Jun  7 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.07-0.1rc1
+- 2016.07 RC1
+- Build new aarch64 devices: odroid-c2
+- Build new ARMv7 devices: chromebook-jerry
 
-* Wed Aug 19 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.3.rc2
-- Enable a number of new Rockchip devices
+* Mon May 23 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.05-3
+- Ship SPL for rockchips devices
 
-* Mon Aug 10 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.2.rc2
-- Update to 2020.10 RC2
+* Thu May 19 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.05-2
+- Fix distro boot on clearfog
+- arm64 EFI boot fixes
 
-* Tue Jul 28 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.1.rc1
-- 2020.10 RC1
+* Mon May 16 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.05-1
+- Update to 2016.05 GA
 
-* Tue Jul 14 2020 Tom Stellard <tstellar@redhat.com> - 2020.07-2
-- Use make macros
-- https://fedoraproject.org/wiki/Changes/UseMakeBuildInstallMacro
+* Thu May 12 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.05-0.5rc3
+- Add USB storage support to CHIP
+- Enhanced PINE64 support
 
-* Mon Jul 06 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-1
-- 2020.07 GA
+* Thu Apr 28 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.05-0.4rc3
+- Upstream fix for i.MX6 breakage
+- Rebase mvebu distro boot patch
 
-* Tue Jun 23 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.5.rc5
-- 2020.07 RC5
+* Wed Apr 27 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.05-0.3rc3
+- Add work around for imx6 and renable devices
 
-* Thu Jun 18 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.4.rc4
-- Update various patches to latest upstream
+* Tue Apr 26 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.05-0.2rc3
+- 2016.05 RC3
+- Add some useful device READMEs that contain locations of needed firmware blobs etc
+- Enable Jetson TX1
+- i.MX6 still disabled
 
-* Wed Jun 10 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.3.rc4
-- 2020.07 RC4
-- Minor updates and other fixes
+* Thu Apr 21 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.05-0.1rc1
+- 2016.05 RC1
+- Build aarch64 u-boot for HiKey, DragonBoard, PINE64
+- Build new ARMv7 devices
+- Temp disable some i.MX6 devices as build broken
 
-* Tue May 12 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.2.rc2
-- 2020.07 RC2
-- Minor device updates
+* Tue Apr 19 2016 Dennis Gilmore <dennis@ausil.us> - 2016.03-6
+- drop using the fedora logos for now rhbz#1328505
 
-* Wed Apr 29 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.1.rc1
-- 2020.07 RC1
+* Sat Apr  9 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.03-5
+- Add upstream fix for ARMv7 cache issues preventing some devices from booting
 
-* Tue Apr 21 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-4
-- Initial support for USB on Rasperry Pi 4
+* Tue Mar 22 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.03-4
+- Add a better fix for network issue which caused follow on issues
 
-* Tue Apr 21 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-3
-- Ship u-boot-rockchip.bin for SPI flash
+* Mon Mar 21 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.03-3
+- Add a work around for ggc6 issue on some ARMv7 devices
+- Add fixes for AllWinner USB and some fixes for OrangePi devices
 
-* Mon Apr 20 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-2
-- Fix ATF for new aarch64 devices
-- Fix Wandboard board detection (rhbz 1825247)
-- Fix mSD card on RockPro64
-- Enable (inital) Pinebook Pro
+* Fri Mar 18 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.03-2
+- Add upstream patches to fix some issues on some AllWinner devices
 
-* Tue Apr 14 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-1
-- 2020.04
+* Mon Mar 14 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.03-1
+- Update to 2016.03 GA
 
-* Tue Apr  7 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.7-rc5
-- 2020.04 RC5
+* Sun Mar  6 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.03-0.4rc3
+- Minor cleanups and new devices
 
-* Tue Mar 31 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.6-rc4
-- 2020.04 RC4
-- Updates for NVIDIA Jetson platforms
-- Support RNG for random seed for KASLR on some Rockchip devices
+* Tue Mar  1 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.03-0.3rc3
+- Update to 2016.03 RC3
 
-* Thu Mar 26 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.5-rc3
-- Fix ext4 alignment issue seen on some NXP i.MX devices
+* Tue Feb 16 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.03-0.2rc2
+- Update to 2016.03 RC2
+- Enable SolidRun Clearfog
 
-* Wed Feb 26 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.4-rc3
-- 2020.04 RC3
+* Wed Feb  3 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.03-0.1rc1
+- Update to 2016.03 RC1
 
-* Thu Feb 13 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.3-rc2
-- 2020.04 RC2
+* Wed Jan 20 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.01-3
+- Fix PXE boot on Wandboard (rhbz #1299957)
 
-* Sun Feb  2 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.2-rc1
-- Update genet NIC driver
+* Tue Jan 19 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.01-2
+- Add patch to fix PCI-e on Jetson TK1
+- Add patch fo serial junk on BeagleBone
 
-* Wed Jan 29 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.1-rc1
-- 2020.04 RC1
+* Tue Jan 12 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.01-1
+- Update to 2016.01 GA
 
-* Tue Jan  7 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-1
-- 2020.01
+* Sun Jan 10 2016 Peter Robinson <pbrobinson@fedoraproject.org> 2016.01-0.4rc4
+- Update to 2016.01 RC4
+
+* Tue Dec 22 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2016.01-0.3rc3
+- Update to 2016.01 RC3
+- Enable Lamobo_R1
+
+* Tue Dec  8 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2016.01-0.2rc2
+- Update to 2016.01 RC2
+- Enable Orange Pi (original, mini, PC, plus)
+
+* Tue Nov 17 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2016.01-0.1rc1
+- Update to 2016.01 RC1
+
+* Sat Nov 14 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.10-3
+- Use upstream Wanboard distro boot patch
+- Add support for BeagleBone Green
+- Add initial support for C.H.I.P.
+- Enable Rockchips: Firefly, Jerry devices
+- Enable Exynos: Peach Pit/Pi, Sprint devices
+
+* Tue Nov  3 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.10-2
+- Fix boot on some devices
+
+* Tue Oct 20 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.10-1
+- Update to 2015.10 GA
+- Enable BeagleBoard X-15
+- Enable new AllWinner devices
+
+* Mon Oct 12 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.10-0.4rc5
+- Update to 2015.10 RC5
+
+* Tue Sep 29 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.10-0.3rc4
+- Update to 2015.10 RC4
+
+* Fri Sep 11 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.10-0.2rc3
+- Update to 2015.10 RC3
+
+* Tue Aug  4 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.10-0.1rc1
+- Update to 2015.10 RC1
+
+* Mon Aug  3 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.07-3
+- Drop some unused u-boot binaries
+- Minor cleanups
+
+* Thu Jul 16 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.07-2
+- Disable boot splash on Utilite (cm_fx6)
+
+* Wed Jul 15 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.07-1
+- Update to 2015.07 GA
+
+* Thu Jul  2 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.07-0.4rc3
+- Update to 2015.07rc3
+- Some fixes for omap4/am33xx/imx6 devices
+
+* Mon Jun 22 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.07-0.3rc2
+- Initial rebase of BBB/panda/wandboard generic distro boot support
+
+* Tue Jun 16 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.07-0.2rc2
+- Enable i.MX6 marsboard and warp
+- Use upstream build fix
+- Add patch to fix Raspberry Pi timer speed
+
+* Tue Jun  9 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.07-0.1rc2
+- Initial rebase to 2015.07rc2
+- Enable mx6cuboxi, 32 bit vexpress
+- Update builds for name changes, merges etc
+
+* Wed May 27 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.04-3
+- Enable Zynq microzed, zed and zybo
+
+* Sun May 10 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.04-2
+- Build nyan-big
+
+* Fri Apr 17 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.04-1
+- Update to 2015.04 GA
+- Build Raspberry Pi 2 config
+
+* Tue Apr 07 2015 Marcin Juszkiewicz <mjuszkiewicz@redhat.com> - 2015.04-0.6.rc5
+- Build U-Boot for Juno and Foundation model instead of removed board
+
+* Thu Apr  2 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.04-0.5.rc5
+- Update to 2015.04 rc5
+
+* Mon Mar 30 2015 Dennis Gilmore <dennis@ausil.us> - 2015.04-0.4.rc4
+- add patch to fix booting on omap4 devices
+- refeactor spec file
+- add all sunxi boards
+- add odroid and odroid-xu3
+
+* Sat Mar 21 2015 Dennis Gilmore <dennis@ausil.us> - 2015.04-0.3.rc4
+- fix up bbb and wandboard to autoboot again
+
+* Fri Mar 20 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.04-0.2.rc4
+- Update to 2015.04 rc4
+
+* Fri Mar  6 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.04-0.1.rc3
+- Update to 2015.04 rc3
+- Enable AllWinner: OLinuXino-Lime2 Mele_M3 Bananapro
+- Enable i.MX6: novena hummingboard
+- Build ext support into omap3 SPL
+
+* Sat Feb 21 2015 Till Maas <opensource@till.name> - 2015.01-4
+- Rebuilt for Fedora 23 Change
+  https://fedoraproject.org/wiki/Changes/Harden_all_packages_with_position-independent_code
+
+* Sat Feb 07 2015 Hans de Goede <hdegoede@redhat.com> - 2015.01-3
+- fix build with gcc5
+
+* Mon Feb 02 2015 Dennis Gilmore <dennis@ausil.us> - 2015.01-2
+- enable db-mv784mp-gp
+
+* Tue Jan 13 2015 Peter Robinson <pbrobinson@fedoraproject.org> 2015.01-1
+- update to 2015.01
+
+* Fri Dec 12 2014 Dennis Gilmore <dennis@ausil.us> - 2015.01-0.2.rc3
+- update to 2015.01 rc3
+
+
+* Wed Nov 26 2014 Dennis Gilmore <dennis@ausil.us> - 2015.01-0.1.rc2
+- update to 2015.01 rc2
+
+* Tue Nov 11 2014 Dennis Gilmore <dennis@ausil.us> - 2014.10-5
+- switch the target used for beaglebone rhbz#1161619
+
+* Mon Oct 27 2014 Dennis Gilmore <dennis@ausil.us> - 2014.10-4
+- port panda board to upstreamed geneic boot commands
+- append the console line automatically again
+
+* Fri Oct 24 2014 Dennis Gilmore <dennis@ausil.us> - 2014.10-3
+- scan both the first and second partitions for boot configs on beaglebone
+
+* Thu Oct 16 2014 Peter Robinson <pbrobinson@fedoraproject.org> 2014.10-2
+- Add upstream patch to fix Tegra Jetson K1 pci-e (for network)
+
+* Wed Oct 15 2014 Dennis Gilmore <dennis@ausil.us> - 2014.10-1
+- update to 2014.10 final release
+
+* Tue Oct 14 2014 Dennis Gilmore <dennis@ausil.us> - 2014.10-0.7.rc3
+- refacter making directories for images
+- make cm_fx6 image for utilite
+
+* Wed Oct  8 2014 Peter Robinson <pbrobinson@fedoraproject.org> 2014.10-0.6.rc3
+- Update to 2014.10 rc3
+- Add proposed distro patches from Debian
+- Add BBone with distro support
+
+* Fri Oct  3 2014 Peter Robinson <pbrobinson@fedoraproject.org> 2014.10-0.5.rc2
+- Enable some more AllWinner devices
+
+* Mon Sep 29 2014 Peter Robinson <pbrobinson@fedoraproject.org> 2014.10-0.4.rc2
+- Add generic distro support to RIoT board
+- Add patch to stabilise BananaPi network
+- Spec cleanups
+
+* Fri Sep 19 2014 Peter Robinson <pbrobinson@fedoraproject.org> 2014.10-0.3.rc2
+- Add Jetson K1, RIoT Board
+- Minor spec cleanups
+- use git to apply patches
+
+* Thu Sep 18 2014 Dennis Gilmore <dennis@ausil.us> - 2014.10-0.2.rc2
+- Add Cubieboard, Cubieboard2, Banana Pi, Mele_A1000 and Mele_A1000G images
+
+* Thu Sep 18 2014 Dennis Gilmore <dennis@ausil.us> - 2014.10-0.1.rc2
+- Update to 2014.10-rc2
+
+* Mon Aug 18 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2014.04-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild
+
+* Sun Jun 08 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2014.04-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
+
+* Sun Apr 27 2014 Dennis Gilmore <dennis@ausil.us> - 2014.04-5
+- fix up aarch64 image package naming
+- drop need for cross compiler to build tools
+
+* Sat Apr 26 2014 Dennis Gilmore <dennis@ausil.us> - 2014.04-4
+- add hyp support to cubietruck image
+- enables kvm support
+
+* Thu Apr 24 2014 Dennis Gilmore <dennis@ausil.us> - 2014.04-3
+- add cubietruck u-boot image
+
+* Wed Apr 23 2014 Dennis Gilmore <dennis@ausil.us> - 2014.04-2
+- automatically add console line from u-boot environment to bootargs
+- when there is no console argument in the extlinux.conf file
+
+* Mon Apr 21 2014 Dennis Gilmore <dennis@ausil.us> - 2014.04-1
+- update to final 2014.04
+- put all images into a single rpm
+- add udoo image
+
+* Wed Mar 19 2014 Dennis Gilmore <dennis@ausil.us> - 2014.04-0.4.rc2
+- apply fixes for panda and beaglebone
+
+* Sat Mar 15 2014 Dennis Gilmore <dennis@ausil.us> - 2014.04-0.3.rc2
+- Add missing header
+- pull in patches on their way upstream to fix some issues with ti
+- systems.
+- refactor beaglebone and pandaboard patches
+
+* Thu Mar 13 2014 Dennis Gilmore <dennis@ausil.us> - 2014.04-0.2.rc2
+- actually apply patches
+
+* Wed Mar 12 2014 Dennis Gilmore <dennis@ausil.us> - 2014.04-0.1.rc2
+- update to 2014.04-rc2 
+- add patches to convert some boards to generic distro configs
+
+* Sun Oct 20 2013 Dennis Gilmore <dennis@ausil.us> - 2013.10-3
+- fix ftbfs for wandboard
+- use _smp_mflags
+
+* Sat Oct 19 2013 Dennis Gilmore <dennis@ausil.us> - 2013.10-2
+- use ext2load for dtb loading
+- cleanup duplicate defines
+
+* Thu Oct 17 2013 Dennis Gilmore <dennis@ausil.us> - 2013.10-1
+- update to 2013.10 final
+- refactor where u-boot binaries are stored
+
+* Fri Oct 04 2013 Dennis Gilmore <dennis@ausil.us> - 2013.10-0.5.rc4
+- update to 2013.10-rc4
+
+* Fri Sep 20 2013 Dennis Gilmore <dennis@ausil.us> - 2013.10-0.4.rc3
+- install u-boot.map for trimslice and paz00
+
+* Fri Sep 20 2013 Dennis Gilmore <dennis@ausil.us> - 2013.10-0.3.rc3
+- install trimslice u-boot correctly
+
+* Fri Sep 20 2013 Dennis Gilmore <dennis@ausil.us> - 2013.10-0.2.rc3
+- enable arndale, paz00, snow, snowball and trimslice builds
+
+* Thu Sep 19 2013 Dennis Gilmore <dennis@ausil.us> - 2013.10-0.1.rc3
+- update to 2013.10-rc3
+- disable panda timing patch for now
+
+* Mon Sep 02 2013 Dennis Gilmore <dennis@ausil.us> - 2013.10-0.1.rc2
+- update  to 2013.10-rc2
+- enable extlinux.conf support on most boards
+- add distro generic configuration options
+
+* Sun Sep  1 2013 Peter Robinson <pbrobinson@fedoraproject.org> 2013.07-2
+- Add patch for Panda ES memory type issue
+
+* Fri Jul 26 2013 Dennis Gilmore <dennis@ausil.us> - 2013.07-1
+- update to 2013.07 final 
+
+* Thu Jul 18 2013 Dennis Gilmore <dennis@ausil.us> - 2013.07-0.2.rc3
+- update to 2013.07 rc3
+- set wandboard to use extlinux.conf by default
+
+* Thu Jul 04 2013 Dennis Gilmore <dennis@ausil.us> - 2013.07-0.1.rc2
+- update beaglebone patches 
+- update wandboard quad patch
+- upstream 2013.07-rc2 update
+
+* Wed Jun 05 2013 Dennis Gilmore <dennis@ausil.us> - 2013.04-5
+- add patches to support ext filesystems in exynos and omap SPL's
+- drop bringing in arm-boot-config on arm systems
+- build a highbank u-boot (intention is to use in qemu)
+- add wandboard quad u-boot
+
+* Wed May 22 2013 Dennis Gilmore <dennis@ausil.us> - 2013.04-4
+- build vexpress image
+- add uEnv.txt files for various supported omap systems
+
+* Sat May 18 2013 Dennis Gilmore <dennis@ausil.us> - 2013.04-3
+- add uevm, the omap5 based pandaboard
+- Require arm-boot-config on arm arches 
+
+* Mon May 13 2013 Peter Robinson <pbrobinson@fedoraproject.org> 2013.04-2
+- Add patches for initial support for the Beagle Bone Black
+
+* Sun Apr 21 2013 Peter Robinson <pbrobinson@fedoraproject.org> 2013.04-1
+- Update to 2013.04 release
+- Build i.MX6 Wandboard Dual Lite and Solo Boards
+
+* Sun Mar 31 2013 Dennis Gilmore <dennis@ausil.us> - 2013.04-0.1.rc1
+- update to 2013.04-rc2
+
+* Fri Mar 01 2013 Dennis Gilmore <dennis@ausil.us> - 2013.01.01-1
+- update to 2013.01.01 for bug#907139
+
+* Thu Jan 24 2013 Dennis Gilmore <dennis@ausil.us> - 2013.01-1
+- update to 2013.01 release
+
+* Wed Oct 17 2012 Dennis Gilmore <dennis@ausil.us> - 2012.10-1
+- update to final 2012.10 release
+
+* Thu Oct 11 2012 Mauro Carvalho Chehab <mchehab@redhat.com>
+- Also generate uboot for SMDK310
+
+* Tue Oct 09 2012 Dennis Gilmore <dennis@ausil.us> - 2012.10-0.1.rc3
+- update to 2010.10 rc3
+
+* Fri Aug 24 2012 Dennis Gilmore <dennis@ausil.us> - 2012.01-1
+- update to 2012.07 release
+
+* Sun Jul 22 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2012.07-0.2.rc1
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
+
+* Thu Jul 12 2012 Dennis Gilmore <dennis@ausil.us> - 2012.07-0.1.rc1
+- update to rc1 of 2012.07 release
+
+* Sat Jul 07 2012 Dennis Gilmore <dennis@ausil.us> - 2012.04.01-4
+- still build the beagleboard image
+
+* Sat Jul 07 2012 Dennis Gilmore <dennis@ausil.us> - 2012.04.01-3
+- build beaglebone uboot images
+
+* Mon Jun 25 2012 Dennis Gilmore <dennis@ausil.us> - 2012.04.01-2
+- add patch so the MLO detects fat16 partitions correctly
+
+* Mon May 07 2012 Dennis Gilmore <dennis@ausil.us> - 2012.04.01-1
+- update to 2012.04.01 release
+- http://lists.denx.de/pipermail/u-boot/2012-April/123011.html
+
+* Tue Apr 24 2012 Dennis Gilmore <dennis@ausil.us> - 2012.04-1
+- update to final 2012.04 release
+
+* Thu Apr 19 2012 Dennis Gilmore <dennis@ausil.us> - 2012.04-0.1.rc3
+- update to 2012.04-rc3
+- build uboot binaries for beagle, panda and origen boards
+
+* Thu Mar 08 2012 Dennis Gilmore <dennis@ausil.us> - 2011.12-1
+- update to 2011.12 release
+
+* Sat Jan 14 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2011.03-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
+
+* Thu Apr 14 2011 Dan Horák <dan[at]danny.cz> - 2011.03-1
+- updated to to 2011.03
+- build the tool for manipulation with environment only on arm
+
+* Mon Feb 07 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2010.03-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
+
+* Thu May 27 2010 Dan Horák <dan[at]danny.cz> 2010.03-1
+- updated to to 2010.03
+- applied review feedback - added docs and expanded description
+- pass proper CFLAGS to the compiler
+
+* Sat Nov 14 2009 Dan Horák <dan[at]danny.cz> 2009.08-1
+- initial Fedora version

uefi-distro-load-FDT-from-any-partition-on-boot-device.patch

@@ -1,82 +0,0 @@
-From cc3700b5c65494547308df395fe63166ff48a1e3 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 24 Nov 2020 10:35:48 +0000
-Subject: [PATCH 1/2] distro: load FDT from any partition on boot device
-
-In the EFI_LOADER boot path, we were only checking the FAT partition
-containing the EFI payload for dtb files.  But this is somewhat of a
-fiction.  In reality there will be one small (V)FAT partition containing
-grub (or whatever the payload may be), and a second boot partition
-containing kernel/initrd/fdt (typically ext4).  It is this second
-partition where we should be looking for a FDT to load.
-
-So instead scan all the partitions of the disk containing the EFI
-payload.  This matches where grub looks for kernel/initrd (barring
-custom grub.cfg, in which case the user can use grub's 'devicetree'
-command to load the correct FDT).
-
-The other option is somehow passing the ${fdtfile} to grub so that it
-can load the FDT based on selected kernel version location (which grub
-knows) and SoC/board specific ${fdtfile} (which grub does not know).
-
-Signed-off-by: Rob Clark <robdclark@gmail.com>
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- include/config_distro_bootcmd.h | 33 +++++++++++++++++++++++----------
- 1 file changed, 23 insertions(+), 10 deletions(-)
-
-diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
-index ff29ef5a905..769477cd80e 100644
---- a/include/config_distro_bootcmd.h
-+++ b/include/config_distro_bootcmd.h
-@@ -142,24 +142,37 @@
- 	"load_efi_dtb="                                                   \
- 		"load ${devtype} ${devnum}:${distro_bootpart} "           \
- 			"${fdt_addr_r} ${prefix}${efi_fdtfile}\0"         \
-+		"load ${devtype} ${devnum}:${dtb_devp} "                  \
-+			"${fdt_addr_r} ${prefix}${efi_fdtfile} && "       \
-+		"run boot_efi_binary\0"                                   \
- 	\
- 	"efi_dtb_prefixes=/ /dtb/ /dtb/current/\0"                        \
--	"scan_dev_for_efi="                                               \
-+	"scan_dev_for_dtb="                                               \
- 		"setenv efi_fdtfile ${fdtfile}; "                         \
- 		BOOTENV_EFI_SET_FDTFILE_FALLBACK                          \
--		"for prefix in ${efi_dtb_prefixes}; do "                  \
--			"if test -e ${devtype} "                          \
--					"${devnum}:${distro_bootpart} "   \
--					"${prefix}${efi_fdtfile}; then "  \
--				"run load_efi_dtb; "                      \
--			"fi;"                                             \
--		"done;"                                                   \
--		"run boot_efi_bootmgr;"                                   \
-+		"part list ${devtype} ${devnum} dtb_devplist; "           \
-+		"env exists dtb_devplist || setenv dtb_devplist "         \
-+			"${distro_bootpart}; "                            \
-+		"for dtb_devp in ${dtb_devplist}; do "                    \
-+			"for prefix in ${efi_dtb_prefixes}; do "          \
-+				"if test -e ${devtype} "                  \
-+						"${devnum}:${dtb_devp} "  \
-+						"${prefix}${efi_fdtfile};"\
-+						" then "                  \
-+					"echo Found DTB ${devtype} "      \
-+						"${devnum}:${dtb_devp} "  \
-+						"${prefix}${efi_fdtfile};"\
-+					"run load_efi_dtb; "              \
-+				"fi;"                                     \
-+			"done; "                                          \
-+		"done; "                                                  \
-+		"run boot_efi_bootmgr\0"                                  \
-+	"scan_dev_for_efi="                                               \
- 		"if test -e ${devtype} ${devnum}:${distro_bootpart} "     \
- 					"efi/boot/"BOOTEFI_NAME"; then "  \
- 				"echo Found EFI removable media binary "  \
- 					"efi/boot/"BOOTEFI_NAME"; "       \
--				"run boot_efi_binary; "                   \
-+				"run scan_dev_for_dtb; "                  \
- 				"echo EFI LOAD FAILED: continuing...; "   \
- 		"fi; "                                                    \
- 		"setenv efi_fdtfile\0"
--- 
-2.29.2
-

uefi-use-Fedora-specific-path-name.patch

@@ -1,50 +0,0 @@
-From d8fcb72d566b0ebca1613555ac13c0798817487e Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 24 Nov 2020 10:37:28 +0000
-Subject: [PATCH 2/2] use Fedora specific EFI path/name
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- include/config_distro_bootcmd.h | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
-diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
-index 769477cd80e..22ce3685758 100644
---- a/include/config_distro_bootcmd.h
-+++ b/include/config_distro_bootcmd.h
-@@ -92,9 +92,9 @@
- 
- #ifdef CONFIG_EFI_LOADER
- #if defined(CONFIG_ARM64)
--#define BOOTEFI_NAME "bootaa64.efi"
-+#define BOOTEFI_NAME "grubaa64.efi"
- #elif defined(CONFIG_ARM)
--#define BOOTEFI_NAME "bootarm.efi"
-+#define BOOTEFI_NAME "grubarm.efi"
- #elif defined(CONFIG_X86_RUN_32BIT)
- #define BOOTEFI_NAME "bootia32.efi"
- #elif defined(CONFIG_X86_RUN_64BIT)
-@@ -132,7 +132,7 @@
- 	\
- 	"boot_efi_binary="                                                \
- 		"load ${devtype} ${devnum}:${distro_bootpart} "           \
--			"${kernel_addr_r} efi/boot/"BOOTEFI_NAME"; "      \
-+			"${kernel_addr_r} efi/fedora/"BOOTEFI_NAME"; "      \
- 		"if fdt addr ${fdt_addr_r}; then "                        \
- 			"bootefi ${kernel_addr_r} ${fdt_addr_r};"         \
- 		"else "                                                   \
-@@ -169,9 +169,9 @@
-		"run boot_efi_bootmgr\0"                                  \
- 	"scan_dev_for_efi="                                               \
- 		"if test -e ${devtype} ${devnum}:${distro_bootpart} "     \
--					"efi/boot/"BOOTEFI_NAME"; then "  \
-+					"efi/fedora/"BOOTEFI_NAME"; then " \
- 				"echo Found EFI removable media binary "  \
--					"efi/boot/"BOOTEFI_NAME"; "       \
-+					"efi/fedora/"BOOTEFI_NAME"; "     \
- 				"run scan_dev_for_dtb; "                  \
- 				"echo EFI LOAD FAILED: continuing...; "   \
- 		"fi; "                                                    \
--- 
-2.29.2
-

usb-kbd-fixes.patch

@@ -1,115 +0,0 @@
-From a49845f198af088c4e5e0019edbf519344d78c97 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Tue, 4 Dec 2018 15:29:14 +0000
-Subject: [PATCH] usb kbd fixes
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- common/usb_kbd.c  | 66 +++++++++++++++++++++++++++++++++++------------
- include/console.h |  2 --
- 2 files changed, 50 insertions(+), 18 deletions(-)
-
-diff --git a/common/usb_kbd.c b/common/usb_kbd.c
-index 020f0d4117f..47674ce4458 100644
---- a/common/usb_kbd.c
-+++ b/common/usb_kbd.c
-@@ -518,25 +518,59 @@ static int probe_usb_keyboard(struct usb_device *dev)
- 		return error;
- 
- 	stdinname = env_get("stdin");
--#if CONFIG_IS_ENABLED(CONSOLE_MUX)
--	error = iomux_doenv(stdin, stdinname);
--	if (error)
--		return error;
--#else
--	/* Check if this is the standard input device. */
--	if (strcmp(stdinname, DEVNAME))
--		return 1;
-+	if (CONFIG_IS_ENABLED(CONSOLE_MUX)) {
-+		char *devname = DEVNAME;
-+		char *newstdin = NULL;
-+		/*
-+		 * stdin might not be set yet.. either way, with console-
-+		 * mux the sensible thing to do is add ourselves to the
-+		 * list of stdio devices:
-+		 */
-+		if (stdinname && !strstr(stdinname, DEVNAME)) {
-+			newstdin = malloc(strlen(stdinname) +
-+					strlen(","DEVNAME) + 1);
-+			sprintf(newstdin, "%s,"DEVNAME, stdinname);
-+			stdinname = newstdin;
-+		} else if (!stdinname) {
-+			stdinname = devname;
-+		}
-+		error = iomux_doenv(stdin, stdinname);
-+		free(newstdin);
-+		if (error)
-+			goto unregister_stdio;
-+	} else {
-+		/* Check if this is the standard input device. */
-+		if (strcmp(stdinname, DEVNAME)) {
-+			error = -1;
-+			goto unregister_stdio;
-+		}
- 
--	/* Reassign the console */
--	if (overwrite_console())
--		return 1;
-+		/* Reassign the console */
-+		if (overwrite_console()) {
-+			error = -1;
-+			goto unregister_stdio;
-+		}
- 
--	error = console_assign(stdin, DEVNAME);
--	if (error)
--		return error;
--#endif
-+		error = console_assign(stdin, DEVNAME);
-+		if (error)
-+			goto unregister_stdio;
-+	}
-+
-+	return 0;
- 
-+unregister_stdio:
-+	/*
-+	 * If probe fails, the device will be removed.. leaving dangling
-+	 * pointers if the stdio device is not unregistered.  If u-boot
-+	 * is built without stdio_deregister(), just pretend to succeed
-+	 * in order to avoid dangling pointers.
-+	 */
-+#if CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER)
-+	stdio_deregister(DEVNAME, 1);
-+	return error;
-+#else
- 	return 0;
-+#endif
- }
- 
- #if !CONFIG_IS_ENABLED(DM_USB)
-@@ -642,7 +676,7 @@ static int usb_kbd_remove(struct udevice *dev)
- 
- 	return 0;
- err:
--	printf("%s: warning, ret=%d", __func__, ret);
-+	printf("%s: warning, ret=%d\n", __func__, ret);
- 	return ret;
- }
- 
-diff --git a/include/console.h b/include/console.h
-index e935c601f12..6382ec8e0d6 100644
---- a/include/console.h
-+++ b/include/console.h
-@@ -56,8 +56,6 @@ int console_announce_r(void);
- /*
-  * CONSOLE multiplexing.
-  */
--#ifdef CONFIG_CONSOLE_MUX
- #include <iomux.h>
--#endif
- 
- #endif
--- 
-2.19.2
-