add RNG driver for rpi4

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>

0001-Add-wandboard-quad-support.patch

@@ -1,81 +0,0 @@
-From f7687f75a5cba567a8dbccb43dc5826c9deb8de4 Mon Sep 17 00:00:00 2001
-From: Dennis Gilmore <dennis@ausil.us>
-Date: Sun, 30 Jun 2013 15:18:08 -0500
-Subject: [PATCH 01/15] Add wandboard quad support
-
----
- board/boundary/nitrogen6x/nitrogen6quad.cfg | 45 +++++++++++++++++++++++++++++
- board/wandboard/README                      |  5 ++++
- 2 files changed, 50 insertions(+)
- create mode 100644 board/boundary/nitrogen6x/nitrogen6quad.cfg
-
-diff --git a/board/boundary/nitrogen6x/nitrogen6quad.cfg b/board/boundary/nitrogen6x/nitrogen6quad.cfg
-new file mode 100644
-index 0000000..dccd497
---- /dev/null
-+++ b/board/boundary/nitrogen6x/nitrogen6quad.cfg
-@@ -0,0 +1,45 @@
-+/*
-+ * Copyright (C) 2013 Boundary Devices
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not write to the Free Software
-+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-+ * MA 02110-1301 USA
-+ *
-+ * Refer doc/README.imximage for more details about how-to configure
-+ * and create imximage boot image
-+ *
-+ * The syntax is taken as close as possible with the kwbimage
-+ */
-+
-+/* image version */
-+IMAGE_VERSION 2
-+
-+/*
-+ * Boot Device : one of
-+ * spi, sd (the board has no nand neither onenand)
-+ */
-+BOOT_FROM      sd
-+
-+#define __ASSEMBLY__
-+#include <config.h>
-+#include "asm/arch/mx6-ddr.h"
-+#include "asm/arch/iomux.h"
-+#include "asm/arch/crm_regs.h"
-+
-+#include "ddr-setup.cfg"
-+#include "800mhz_4x256mx16.cfg"
-+#include "clocks.cfg"
-diff --git a/board/wandboard/README b/board/wandboard/README
-index 498db2f..4e54ee3 100644
---- a/board/wandboard/README
-+++ b/board/wandboard/README
-@@ -17,6 +17,11 @@ To build U-Boot for the Wandboard Dual Lite version:
- $ make wandboard_dl_config
- $ make
- 
-+To build U-Boot for the Wandboard Quad version:
-+
-+$ make wandboard_quad_config
-+$ make
-+
- To build U-Boot for the Wandboard Solo version:
- 
- $ make wandboard_solo_config
--- 
-1.8.3.1
-

0001-Fix-BeagleAI-detection.patch

@@ -0,0 +1,29 @@
+From 1849ef423238aeb1732eb3b8e67eb46bc21401c7 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Thu, 10 Sep 2020 14:24:12 +0100
+Subject: [PATCH] Fix BeagleAI detection
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ board/ti/am57xx/board.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
+index 7809875510..3232812a97 100644
+--- a/board/ti/am57xx/board.c
++++ b/board/ti/am57xx/board.c
+@@ -527,8 +527,10 @@ void do_board_detect(void)
+ 
+ 	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
+ 				  CONFIG_EEPROM_CHIP_ADDRESS);
+-	if (rc)
++	if (rc) {
+ 		printf("ti_i2c_eeprom_init failed %d\n", rc);
++		ti_i2c_eeprom_am_set("BBONE-AI", "A");
++	}
+ 
+ #ifdef CONFIG_SUPPORT_EMMC_BOOT
+ 	rc = board_bootmode_has_emmc();
+-- 
+2.26.2
+

0001-Fixes-for-AllWinner-ethernet-network-interfaces.patch

@@ -0,0 +1,518 @@
+From 25ce28126444900b7b3efef36c6b9d15a6ab9af1 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Wed, 28 Oct 2020 10:08:44 +0000
+Subject: [PATCH] Fixes for AllWinner ethernet network interfaces
+
+The upstream kernel in fixing stuff has broken stuff.
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ arch/arm/dts/sun50i-a64-bananapi-m64.dts        | 2 +-
+ arch/arm/dts/sun50i-a64-nanopi-a64.dts          | 2 +-
+ arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts | 2 +-
+ arch/arm/dts/sun50i-a64-olinuxino.dts           | 2 +-
+ arch/arm/dts/sun50i-a64-orangepi-win.dts        | 2 +-
+ arch/arm/dts/sun50i-a64-pine64-plus.dts         | 2 +-
+ arch/arm/dts/sun50i-a64-sopine-baseboard.dts    | 2 +-
+ arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts  | 2 +-
+ arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts     | 2 +-
+ arch/arm/dts/sun50i-h5-nanopi-neo2.dts          | 2 +-
+ arch/arm/dts/sun50i-h5-orangepi-pc2.dts         | 2 +-
+ arch/arm/dts/sun50i-h5-orangepi-prime.dts       | 2 +-
+ arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts   | 2 +-
+ arch/arm/dts/sun50i-h6-beelink-gs1.dts          | 2 +-
+ arch/arm/dts/sun50i-h6-pine-h64.dts             | 2 +-
+ arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts     | 2 +-
+ arch/arm/dts/sun7i-a20-bananapi.dts             | 2 +-
+ arch/arm/dts/sun7i-a20-bananapro.dts            | 2 +-
+ arch/arm/dts/sun7i-a20-cubietruck.dts           | 2 +-
+ arch/arm/dts/sun7i-a20-hummingbird.dts          | 2 +-
+ arch/arm/dts/sun7i-a20-lamobo-r1.dts            | 2 +-
+ arch/arm/dts/sun7i-a20-olimex-som-evb.dts       | 2 +-
+ arch/arm/dts/sun7i-a20-olimex-som204-evb.dts    | 2 +-
+ arch/arm/dts/sun7i-a20-olinuxino-lime2.dts      | 2 +-
+ arch/arm/dts/sun7i-a20-orangepi-mini.dts        | 2 +-
+ arch/arm/dts/sun7i-a20-orangepi.dts             | 2 +-
+ arch/arm/dts/sun7i-a20-pcduino3-nano.dts        | 2 +-
+ arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts     | 2 +-
+ arch/arm/dts/sun8i-a83t-bananapi-m3.dts         | 2 +-
+ arch/arm/dts/sun8i-a83t-cubietruck-plus.dts     | 2 +-
+ arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts        | 2 +-
+ arch/arm/dts/sun8i-h3-orangepi-plus.dts         | 2 +-
+ arch/arm/dts/sun8i-h3-orangepi-plus2e.dts       | 2 +-
+ arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts    | 2 +-
+ arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts    | 2 +-
+ arch/arm/dts/sunxi-bananapi-m2-plus.dtsi        | 2 +-
+ 36 files changed, 36 insertions(+), 36 deletions(-)
+
+diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
+index ef1c90401b..e1c22aeb29 100644
+--- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts
++++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
+@@ -112,7 +112,7 @@
+ &emac {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&rgmii_pins>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-handle = <&ext_rgmii_phy>;
+ 	phy-supply = <&reg_dc1sw>;
+ 	status = "okay";
+diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
+index 31884dbc88..03ebe3e44b 100644
+--- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts
++++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
+@@ -102,7 +102,7 @@
+ &emac {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&rgmii_pins>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-handle = <&ext_rgmii_phy>;
+ 	phy-supply = <&reg_dcdc1>;
+ 	status = "okay";
+diff --git a/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
+index 6a2154525d..94caf110ab 100644
+--- a/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
++++ b/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
+@@ -30,7 +30,7 @@
+ &emac {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&rgmii_pins>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-handle = <&ext_rgmii_phy>;
+ 	phy-supply = <&reg_dc1sw>;
+ 	allwinner,tx-delay-ps = <600>;
+diff --git a/arch/arm/dts/sun50i-a64-olinuxino.dts b/arch/arm/dts/sun50i-a64-olinuxino.dts
+index f7a4bccaa5..2396d9b797 100644
+--- a/arch/arm/dts/sun50i-a64-olinuxino.dts
++++ b/arch/arm/dts/sun50i-a64-olinuxino.dts
+@@ -102,7 +102,7 @@
+ &emac {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&rgmii_pins>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-handle = <&ext_rgmii_phy>;
+ 	phy-supply = <&reg_dcdc1>;
+ 	allwinner,tx-delay-ps = <600>;
+diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts
+index b0c64f7579..5b5d4f31b6 100644
+--- a/arch/arm/dts/sun50i-a64-orangepi-win.dts
++++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts
+@@ -127,7 +127,7 @@
+ &emac {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&rgmii_pins>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-handle = <&ext_rgmii_phy>;
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	status = "okay";
+diff --git a/arch/arm/dts/sun50i-a64-pine64-plus.dts b/arch/arm/dts/sun50i-a64-pine64-plus.dts
+index 24f1aac366..b09b4276f1 100644
+--- a/arch/arm/dts/sun50i-a64-pine64-plus.dts
++++ b/arch/arm/dts/sun50i-a64-pine64-plus.dts
+@@ -52,7 +52,7 @@
+ &emac {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&rgmii_pins>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-txid";
+ 	phy-handle = <&ext_rgmii_phy>;
+ 	status = "okay";
+ };
+diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
+index 53fcc9098d..4a50a18128 100644
+--- a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
++++ b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
+@@ -95,7 +95,7 @@
+ &emac {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&rgmii_pins>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-handle = <&ext_rgmii_phy>;
+ 	phy-supply = <&reg_dc1sw>;
+ 	status = "okay";
+diff --git a/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
+index df1b9263ad..6e30a564c8 100644
+--- a/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
++++ b/arch/arm/dts/sun50i-h5-libretech-all-h5-cc.dts
+@@ -36,7 +36,7 @@
+ 	pinctrl-0 = <&emac_rgmii_pins>;
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	phy-handle = <&ext_rgmii_phy>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	/delete-property/ allwinner,leds-active-low;
+ 	status = "okay";
+ };
+diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
+index 4f9ba53ffa..9d93fe1536 100644
+--- a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
++++ b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
+@@ -96,7 +96,7 @@
+ 	pinctrl-0 = <&emac_rgmii_pins>;
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	phy-handle = <&ext_rgmii_phy>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	status = "okay";
+ };
+ 
+diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
+index b059e20813..e8ab8c2df5 100644
+--- a/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
++++ b/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
+@@ -75,7 +75,7 @@
+ 	pinctrl-0 = <&emac_rgmii_pins>;
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	phy-handle = <&ext_rgmii_phy>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	status = "okay";
+ };
+ 
+diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
+index 70b5f09984..6cc567ea99 100644
+--- a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
++++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
+@@ -118,7 +118,7 @@
+ 	pinctrl-0 = <&emac_rgmii_pins>;
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	phy-handle = <&ext_rgmii_phy>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	status = "okay";
+ };
+ 
+diff --git a/arch/arm/dts/sun50i-h5-orangepi-prime.dts b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
+index cb44bfa598..33ab44072e 100644
+--- a/arch/arm/dts/sun50i-h5-orangepi-prime.dts
++++ b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
+@@ -124,7 +124,7 @@
+ 	pinctrl-0 = <&emac_rgmii_pins>;
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	phy-handle = <&ext_rgmii_phy>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	status = "okay";
+ };
+ 
+diff --git a/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
+index ef5ca64442..de448ca51e 100644
+--- a/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
++++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
+@@ -69,7 +69,7 @@
+ 	pinctrl-0 = <&emac_rgmii_pins>;
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	phy-handle = <&ext_rgmii_phy>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	status = "okay";
+ };
+ 
+diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+index 0dc33c90dd..024035d36e 100644
+--- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
++++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+@@ -64,7 +64,7 @@
+ &emac {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&ext_rgmii_pins>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-handle = <&ext_rgmii_phy>;
+ 	phy-supply = <&reg_aldo2>;
+ 	status = "okay";
+diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts
+index 1898345183..13fbf26817 100644
+--- a/arch/arm/dts/sun50i-h6-pine-h64.dts
++++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
+@@ -66,7 +66,7 @@
+ &emac {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&ext_rgmii_pins>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-handle = <&ext_rgmii_phy>;
+ 	phy-supply = <&reg_aldo2>;
+ 	allwinner,rx-delay-ps = <200>;
+diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
+index e2bfe00588..4dbcad1343 100644
+--- a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
++++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
+@@ -130,7 +130,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+ 	phy = <&phy1>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	status = "okay";
+ 
+diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts
+index 81bc85d398..33040c43bc 100644
+--- a/arch/arm/dts/sun7i-a20-bananapi.dts
++++ b/arch/arm/dts/sun7i-a20-bananapi.dts
+@@ -132,7 +132,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+ 	phy = <&phy1>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	status = "okay";
+ 
+diff --git a/arch/arm/dts/sun7i-a20-bananapro.dts b/arch/arm/dts/sun7i-a20-bananapro.dts
+index 0176e9de01..8a75545e22 100644
+--- a/arch/arm/dts/sun7i-a20-bananapro.dts
++++ b/arch/arm/dts/sun7i-a20-bananapro.dts
+@@ -110,7 +110,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+ 	phy = <&phy1>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	status = "okay";
+ 
+diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
+index 99f531b8d2..46a9f4669e 100644
+--- a/arch/arm/dts/sun7i-a20-cubietruck.dts
++++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
+@@ -151,7 +151,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+ 	phy = <&phy1>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	status = "okay";
+ 
+ 	phy1: ethernet-phy@1 {
+diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts
+index fd0153f656..5c3d107094 100644
+--- a/arch/arm/dts/sun7i-a20-hummingbird.dts
++++ b/arch/arm/dts/sun7i-a20-hummingbird.dts
+@@ -101,7 +101,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+ 	phy = <&phy1>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-supply = <&reg_gmac_vdd>;
+ 	/* phy reset config */
+ 	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
+diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
+index f91e1bee44..8173d77c12 100644
+--- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
++++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
+@@ -120,7 +120,7 @@
+ &gmac {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	status = "okay";
+ 	/delete-property/#address-cells;
+diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
+index f0e6a96e57..f0c5160ff8 100644
+--- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
++++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
+@@ -112,7 +112,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+ 	phy = <&phy1>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	status = "okay";
+ 
+ 	phy1: ethernet-phy@1 {
+diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
+index 823aabce04..ff42708137 100644
+--- a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
++++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
+@@ -106,7 +106,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+ 	phy = <&phy3>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-supply = <&reg_vcc3v3>;
+ 
+ 	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
+index 4e1c590eb0..996201665b 100644
+--- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
++++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
+@@ -112,7 +112,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+ 	phy = <&phy1>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	status = "okay";
+ 
+ 	phy1: ethernet-phy@1 {
+diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
+index 15881081ca..b80215c61c 100644
+--- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts
++++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
+@@ -121,7 +121,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+ 	phy = <&phy1>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	status = "okay";
+ 
+diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts
+index d64de2e73a..66efb7d1ab 100644
+--- a/arch/arm/dts/sun7i-a20-orangepi.dts
++++ b/arch/arm/dts/sun7i-a20-orangepi.dts
+@@ -97,7 +97,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+ 	phy = <&phy1>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	status = "okay";
+ 
+diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
+index 538ea15fa3..205eaae44a 100644
+--- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
++++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
+@@ -115,7 +115,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+ 	phy = <&phy1>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	status = "okay";
+ 
+ 	phy1: ethernet-phy@1 {
+diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
+index c27e56091f..56cc5791c4 100644
+--- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
++++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
+@@ -82,7 +82,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+ 	phy = <&phy1>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	status = "okay";
+ 
+ 	phy1: ethernet-phy@1 {
+diff --git a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
+index eaff6fa401..2beafe3a31 100644
+--- a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
++++ b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
+@@ -123,7 +123,7 @@
+ 	pinctrl-0 = <&emac_rgmii_pins>;
+ 	phy-supply = <&reg_sw>;
+ 	phy-handle = <&rgmii_phy>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	allwinner,rx-delay-ps = <700>;
+ 	allwinner,tx-delay-ps = <700>;
+ 	status = "okay";
+diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
+index 5dba4fc310..ecd9ff38a8 100644
+--- a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
++++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
+@@ -160,7 +160,7 @@
+ 	pinctrl-0 = <&emac_rgmii_pins>;
+ 	phy-supply = <&reg_dldo4>;
+ 	phy-handle = <&rgmii_phy>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	status = "okay";
+ };
+ 
+diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
+index 4ba533b034..bc370d4ea1 100644
+--- a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
++++ b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
+@@ -96,7 +96,7 @@
+ 	pinctrl-0 = <&emac_rgmii_pins>;
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	phy-handle = <&ext_rgmii_phy>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 
+ 	status = "okay";
+ };
+diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
+index 97f497854e..d05fa679dc 100644
+--- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts
++++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
+@@ -85,7 +85,7 @@
+ 	pinctrl-0 = <&emac_rgmii_pins>;
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	phy-handle = <&ext_rgmii_phy>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 
+ 	status = "okay";
+ };
+diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
+index 6dbf7b2e0c..b6ca45d18e 100644
+--- a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
++++ b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
+@@ -67,7 +67,7 @@
+ 	pinctrl-0 = <&emac_rgmii_pins>;
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	phy-handle = <&ext_rgmii_phy>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	status = "okay";
+ };
+ 
+diff --git a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
+index c488aaacbd..9c20245eef 100644
+--- a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
++++ b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
+@@ -129,7 +129,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+ 	phy-handle = <&phy1>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-supply = <&reg_dc1sw>;
+ 	status = "okay";
+ };
+diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
+index 15c22b06fc..3ab6f47cea 100644
+--- a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
++++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
+@@ -120,7 +120,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac_rgmii_pins>;
+ 	phy-handle = <&phy1>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 	phy-supply = <&reg_dc1sw>;
+ 	status = "okay";
+ };
+diff --git a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
+index 39263e74fb..8e5cb3b3fd 100644
+--- a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
++++ b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
+@@ -126,7 +126,7 @@
+ 	pinctrl-0 = <&emac_rgmii_pins>;
+ 	phy-supply = <&reg_gmac_3v3>;
+ 	phy-handle = <&ext_rgmii_phy>;
+-	phy-mode = "rgmii";
++	phy-mode = "rgmii-id";
+ 
+ 	status = "okay";
+ };
+-- 
+2.28.0
+

0002-am335x-mux-don-t-hang-on-unknown-EEPROMs-assume-Beag.patch

@@ -1,32 +0,0 @@
-From 9a379b9ffc8b601f7e6907ceb5c56fa68217de8d Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Wed, 3 Apr 2013 08:32:19 +0200
-Subject: [PATCH 02/15] am335x mux: don't hang on unknown EEPROMs, assume
- BeagleBone Black
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- board/ti/am335x/mux.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
-diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
-index 0283708..ab42011 100644
---- a/board/ti/am335x/mux.c
-+++ b/board/ti/am335x/mux.c
-@@ -305,7 +305,11 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header)
- 		configure_module_pin_mux(mmc0_pin_mux);
- 		configure_module_pin_mux(mmc1_pin_mux);
- 	} else {
--		puts("Unknown board, cannot configure pinmux.");
--		hang();
-+		puts("Unknown board, assuming Beaglebone LT/Black.");
-+		/* Beaglebone LT pinmux */
-+		configure_module_pin_mux(i2c1_pin_mux);
-+		configure_module_pin_mux(mii1_pin_mux);
-+		configure_module_pin_mux(mmc0_pin_mux);
-+		configure_module_pin_mux(mmc1_pin_mux);
- 	}
- }
--- 
-1.8.3.1
-

0003-beaglebone-HACK-always-return-1-for-is_bone_lt.patch

@@ -1,38 +0,0 @@
-From a34b729d67b97cd0bc78747406e249b1c0995cdf Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Wed, 3 Apr 2013 08:33:28 +0200
-Subject: [PATCH 03/15] beaglebone: HACK: always return 1 for is_bone_lt
-
-This is to make the eMMC flasher work, the EEPROM hasn't been populated yet
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- board/ti/am335x/board.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
-diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
-index fdbe26c..f9e7803 100644
---- a/board/ti/am335x/board.c
-+++ b/board/ti/am335x/board.c
-@@ -57,7 +57,8 @@ static inline int board_is_bone(void)
- 
- static inline int board_is_bone_lt(void)
- {
--	return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN);
-+	//return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN);
-+	return 1;
- }
- 
- static inline int board_is_evm_sk(void)
-@@ -359,7 +360,7 @@ void s_init(void)
- 	if (board_is_evm_sk())
- 		config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data,
- 			   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
--	else if (board_is_bone_lt())
-+	else if (board_is_bone_lt() && !board_is_bone())
- 		config_ddr(400, MT41K256M16HA125E_IOCTRL_VALUE,
- 			   &ddr3_beagleblack_data,
- 			   &ddr3_beagleblack_cmd_ctrl_data,
--- 
-1.8.3.1
-

0004-beaglebone-HACK-raise-USB-current-limit.patch

@@ -1,25 +0,0 @@
-From a7eb66eefa4a536e4eec37f9d005bae31ce14ae4 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Wed, 3 Apr 2013 08:27:09 +0200
-Subject: [PATCH 04/15] beaglebone: HACK: raise USB current limit
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/am335x_evm.h | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index c5a6d4b..c143137 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -151,6 +151,7 @@
- #endif
- 
- #define CONFIG_BOOTCOMMAND \
-+	"i2c mw 0x24 1 0x3e; " \
- 	"run findfdt; " \
- 	"mmc dev ${mmcdev}; if mmc rescan; then " \
- 		"echo SD/MMC found on device ${mmcdev};" \
--- 
-1.8.3.1
-

0005-beaglebone-use-kloadaddr-to-avoid-copying-the-kernel.patch

@@ -1,40 +0,0 @@
-From 939bbe4dad5072738b0e4453d8d0d7cebd889450 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Wed, 3 Apr 2013 08:25:04 +0200
-Subject: [PATCH 05/15] beaglebone: use kloadaddr to avoid copying the kernel
- around
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/am335x_evm.h | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index c143137..7a9628e 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -55,6 +55,7 @@
- #ifndef CONFIG_SPL_BUILD
- #define CONFIG_EXTRA_ENV_SETTINGS \
- 	"loadaddr=0x80200000\0" \
-+	"kloadaddr=0x80007fc0\0" \
- 	"fdtaddr=0x80F80000\0" \
- 	"fdt_high=0xffffffff\0" \
- 	"rdaddr=0x81000000\0" \
-@@ -113,11 +114,11 @@
- 		"root=${ramroot} " \
- 		"rootfstype=${ramrootfstype}\0" \
- 	"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
--	"loaduimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+	"loaduimage=load mmc ${bootpart} ${kloadaddr} ${bootdir}/${bootfile}\0" \
- 	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
- 	"mmcboot=echo Booting from mmc ...; " \
- 		"run mmcargs; " \
--		"bootm ${loadaddr} - ${fdtaddr}\0" \
-+		"bootm ${kloadaddr} - ${fdtaddr}\0" \
- 	"nandboot=echo Booting from nand ...; " \
- 		"run nandargs; " \
- 		"nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
--- 
-1.8.3.1
-

0006-beaglebone-try-to-load-uEnv-uImage-from-eMMC-first.patch

@@ -1,44 +0,0 @@
-From 41a2805057a24940731b7299af711a49ab64b0c4 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Wed, 3 Apr 2013 08:44:03 +0200
-Subject: [PATCH 06/15] beaglebone: try to load uEnv/uImage from eMMC first
-
-If u-boot detects the eMMC, try to load from there, if that fails fall back to uSD. Due to linux "features" rootdev can remain mmcblk0p1.
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/am335x_evm.h | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index 7a9628e..2547a87 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -154,6 +154,24 @@
- #define CONFIG_BOOTCOMMAND \
- 	"i2c mw 0x24 1 0x3e; " \
- 	"run findfdt; " \
-+	"mmc dev 1; if mmc rescan; then " \
-+		"echo SD/MMC found on device ${mmcdev};" \
-+		"setenv mmcdev 1;"\
-+		"if run loadbootenv; then " \
-+			"echo Loaded environment from ${bootenv};" \
-+			"run importbootenv;" \
-+		"fi;" \
-+		"if test -n $uenvcmd; then " \
-+			"echo Running uenvcmd ...;" \
-+			"run uenvcmd;" \
-+		"fi;" \
-+		"if run loaduimage; then " \
-+			"run loadfdt;" \
-+			"run mmcboot;" \
-+		"fi;" \
-+	"else " \
-+		"echo No SD/MMC found on device ${mmcdev};" \
-+	"fi;" \
- 	"mmc dev ${mmcdev}; if mmc rescan; then " \
- 		"echo SD/MMC found on device ${mmcdev};" \
- 		"if run loadbootenv; then " \
--- 
-1.8.3.1
-

0007-beaglebone-Don-t-trigger-uboot-variable-lenght-limit.patch

@@ -1,53 +0,0 @@
-From 88dfa478398f9fdf8e99c19b39f98b4ce1def19b Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Wed, 3 Apr 2013 11:39:16 +0200
-Subject: [PATCH 07/15] beaglebone: Don't trigger uboot variable lenght limit
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/am335x_evm.h | 20 +++-----------------
- 1 file changed, 3 insertions(+), 17 deletions(-)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index 2547a87..afe7348 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -154,23 +154,11 @@
- #define CONFIG_BOOTCOMMAND \
- 	"i2c mw 0x24 1 0x3e; " \
- 	"run findfdt; " \
--	"mmc dev 1; if mmc rescan; then " \
--		"echo SD/MMC found on device ${mmcdev};" \
-+	"if mmc dev 1; then " \
-+		"echo eMMC found;" \
- 		"setenv mmcdev 1;"\
--		"if run loadbootenv; then " \
--			"echo Loaded environment from ${bootenv};" \
--			"run importbootenv;" \
--		"fi;" \
--		"if test -n $uenvcmd; then " \
--			"echo Running uenvcmd ...;" \
--			"run uenvcmd;" \
--		"fi;" \
--		"if run loaduimage; then " \
--			"run loadfdt;" \
--			"run mmcboot;" \
--		"fi;" \
- 	"else " \
--		"echo No SD/MMC found on device ${mmcdev};" \
-+		"echo No eMMC found;" \
- 	"fi;" \
- 	"mmc dev ${mmcdev}; if mmc rescan; then " \
- 		"echo SD/MMC found on device ${mmcdev};" \
-@@ -186,8 +174,6 @@
- 			"run loadfdt;" \
- 			"run mmcboot;" \
- 		"fi;" \
--	"else " \
--		"run nandboot;" \
- 	"fi;" \
- 
- /* Clock Defines */
--- 
-1.8.3.1
-

0008-beaglebone-HACK-change-mmc-order-to-avoid-u-boot-cra.patch

@@ -1,35 +0,0 @@
-From 3cda7e03119219824f71694ab789e0040d5a5e18 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Wed, 3 Apr 2013 11:47:14 +0200
-Subject: [PATCH 08/15] beaglebone: HACK: change mmc order to avoid u-boot
- crashing
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/am335x_evm.h | 9 +++++----
- 1 file changed, 5 insertions(+), 4 deletions(-)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index afe7348..485f26b 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -154,11 +154,12 @@
- #define CONFIG_BOOTCOMMAND \
- 	"i2c mw 0x24 1 0x3e; " \
- 	"run findfdt; " \
--	"if mmc dev 1; then " \
--		"echo eMMC found;" \
--		"setenv mmcdev 1;"\
-+	"mmc dev 0; if mmc rescan ; then " \
-+		"echo micro SD card found;" \
-+		"setenv mmcdev 0;"\
- 	"else " \
--		"echo No eMMC found;" \
-+		"echo No micro SD card found, setting mmcdev to 1;" \
-+		"setenv mmcdev 1;"\
- 	"fi;" \
- 	"mmc dev ${mmcdev}; if mmc rescan; then " \
- 		"echo SD/MMC found on device ${mmcdev};" \
--- 
-1.8.3.1
-

0009-beaglebone-update-bootpart-variable-after-mmc-scan.patch

@@ -1,25 +0,0 @@
-From f6a70dd6dc7f02c177ac37bae2438415910d2f07 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Wed, 3 Apr 2013 12:04:17 +0200
-Subject: [PATCH 09/15] beaglebone: update bootpart variable after mmc scan
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/am335x_evm.h | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index 485f26b..941c6fb 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -161,6 +161,7 @@
- 		"echo No micro SD card found, setting mmcdev to 1;" \
- 		"setenv mmcdev 1;"\
- 	"fi;" \
-+	"setenv bootpart ${mmcdev}:2;" \
- 	"mmc dev ${mmcdev}; if mmc rescan; then " \
- 		"echo SD/MMC found on device ${mmcdev};" \
- 		"if run loadbootenv; then " \
--- 
-1.8.3.1
-

0010-am335x_evm-enable-gpio-command.patch

@@ -1,25 +0,0 @@
-From ecc20428e97df32c85d07dbadd5ac43d3d7a2977 Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jdk@ti.com>
-Date: Thu, 4 Apr 2013 05:57:00 +0000
-Subject: [PATCH 10/15] am335x_evm: enable gpio command
-
----
- include/configs/am335x_evm.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index 941c6fb..70ace70 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -44,7 +44,7 @@
- 
- /* commands to include */
- #include <config_cmd_default.h>
--
-+#define CONFIG_CMD_GPIO
- #define CONFIG_CMD_ASKENV
- #define CONFIG_VERSION_VARIABLE
- 
--- 
-1.8.3.1
-

0011-am335x_evm-HACK-to-turn-on-BeagleBone-LEDs.patch

@@ -1,43 +0,0 @@
-From 49f32a629c69828226995fc6234818b1e206e2c3 Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jdk@ti.com>
-Date: Thu, 4 Apr 2013 07:16:41 +0000
-Subject: [PATCH 11/15] am335x_evm: HACK to turn on BeagleBone LEDs
-
-* This might break non-BeagleBone platforms
----
- include/configs/am335x_evm.h | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index 70ace70..37c4b2b 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -152,6 +152,7 @@
- #endif
- 
- #define CONFIG_BOOTCOMMAND \
-+	"gpio set 53; " \
- 	"i2c mw 0x24 1 0x3e; " \
- 	"run findfdt; " \
- 	"mmc dev 0; if mmc rescan ; then " \
-@@ -163,6 +164,7 @@
- 	"fi;" \
- 	"setenv bootpart ${mmcdev}:2;" \
- 	"mmc dev ${mmcdev}; if mmc rescan; then " \
-+		"gpio set 54; " \
- 		"echo SD/MMC found on device ${mmcdev};" \
- 		"if run loadbootenv; then " \
- 			"echo Loaded environment from ${bootenv};" \
-@@ -172,7 +174,9 @@
- 			"echo Running uenvcmd ...;" \
- 			"run uenvcmd;" \
- 		"fi;" \
-+		"gpio set 55; " \
- 		"if run loaduimage; then " \
-+			"gpio set 56; " \
- 			"run loadfdt;" \
- 			"run mmcboot;" \
- 		"fi;" \
--- 
-1.8.3.1
-

0012-Fix-for-screen-rolling-when-video-played-back-in-bro.patch

@@ -1,44 +0,0 @@
-From b5ed0359e7d6a489fc8a293d8b427515e08b90dc Mon Sep 17 00:00:00 2001
-From: Darren Etheridge <detheridge@ti.com>
-Date: Tue, 9 Apr 2013 16:49:38 -0500
-Subject: [PATCH 12/15] Fix for screen rolling when video played back in
- browser on BeagleBone Black This value might need some tweaking, but it
- effectively allows the LCDC and the ARM to play fairer in memory, so the LCDC
- does not get starved causing the screen to roll See Page 439 in spruh73g
- (AM33xx TRM) for details
-
----
- arch/arm/cpu/armv7/am33xx/ddr.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
-diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
-index d1e2fd3..3a93db1 100644
---- a/arch/arm/cpu/armv7/am33xx/ddr.c
-+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
-@@ -21,6 +21,12 @@ http://www.ti.com/
- #include <asm/io.h>
- #include <asm/emif.h>
- 
-+/* This value might need some tweaking, but it effectively allows the LCDC */
-+/* and the ARM to play fairer in memory, so the LCDC does not get starved causing */
-+/* the screen to roll */
-+/* See Page 439 in spruh73g (AM33xx TRM) for details */
-+#define AM33XX_INT_CONFIG_COUNT 0x00303030
-+
- /**
-  * Base address for EMIF instances
-  */
-@@ -79,6 +85,10 @@ void set_sdram_timings(const struct emif_regs *regs, int nr)
- 	writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2_shdw);
- 	writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3);
- 	writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3_shdw);
-+
-+	/* Configure INT_CONFIG value so that LCDC does not get stalled */
-+	/* for a long time if ARM is accessing memory */
-+	writel(AM33XX_INT_CONFIG_COUNT, &emif_reg[nr]->emif_l3_config);
- }
- 
- /**
--- 
-1.8.3.1
-

0013-beaglebone-enable-CONFIG_SUPPORT_RAW_INITRD-option.patch

@@ -1,25 +0,0 @@
-From 69204af251563cc8300ef681bfd5132944972a40 Mon Sep 17 00:00:00 2001
-From: Robert Nelson <robertcnelson@gmail.com>
-Date: Thu, 25 Apr 2013 13:50:35 -0500
-Subject: [PATCH 13/15] beaglebone: enable CONFIG_SUPPORT_RAW_INITRD option
-
-Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
----
- include/configs/am335x_evm.h | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index 37c4b2b..d6b79ca 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -36,6 +36,7 @@
- 
- #define CONFIG_OF_LIBFDT
- #define CONFIG_CMD_BOOTZ
-+#define CONFIG_SUPPORT_RAW_INITRD
- #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
- #define CONFIG_SETUP_MEMORY_TAGS
- #define CONFIG_INITRD_TAG
--- 
-1.8.3.1
-

0014-mmc-Add-RSTN-enable-for-emmc.patch

@@ -1,130 +0,0 @@
-From d24d6e58aa0d5d64c3d9df3fd4d20c17680a6e8e Mon Sep 17 00:00:00 2001
-From: Dennis Gilmore <dennis@ausil.us>
-Date: Thu, 4 Jul 2013 10:53:10 -0500
-Subject: [PATCH 14/15] mmc: Add RSTN enable for emmc
-
-eMMC has the capability of using an external RSTn line.
-It has to be enabled via an access to the ECSD so add a command to do so.
-
-Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
----
- common/cmd_mmc.c  | 24 ++++++++++++++++++++++++
- drivers/mmc/mmc.c | 32 ++++++++++++++++++++++++++++++++
- include/mmc.h     |  4 ++++
- 3 files changed, 60 insertions(+)
-
-diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
-index 5f1ed43..87f8577 100644
---- a/common/cmd_mmc.c
-+++ b/common/cmd_mmc.c
-@@ -238,6 +238,29 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
- 			return CMD_RET_USAGE;
- 		print_mmc_devices('\n');
- 		return 0;
-+	} else if (strncmp(argv[1], "rstn", 4) == 0) {
-+		struct mmc *mmc;
-+		u8 val;
-+		int err;
-+
-+		if (argc != 3)
-+			return CMD_RET_USAGE;
-+
-+		val = simple_strtol(argv[2], NULL, 10);
-+
-+		mmc = find_mmc_device(curr_device);
-+		if (!mmc) {
-+			printf("no mmc device at slot %x\n", curr_device);
-+			return 1;
-+		}
-+		err = mmc_set_rst_n(mmc, val);
-+		if (err != 0) {
-+			printf("failed to set RST_N to 0x%02x\n",
-+					(unsigned int)val & 0xff);
-+			return 1;
-+		}
-+
-+		return 0;
- 	} else if (strcmp(argv[1], "dev") == 0) {
- 		int dev, part = -1;
- 		struct mmc *mmc;
-@@ -431,6 +454,7 @@ U_BOOT_CMD(
- 	"mmc part - lists available partition on current mmc device\n"
- 	"mmc dev [dev] [part] - show or set current mmc device [partition]\n"
- 	"mmc list - lists available devices\n"
-+	"mmc rstn - enable hardware reset of emmc\n"
- #ifdef CONFIG_SUPPORT_EMMC_BOOT
- 	"mmc open <dev> <boot_partition>\n"
- 	" - Enable boot_part for booting and enable R/W access of boot_part\n"
-diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
-index 73f7195..b866d77 100644
---- a/drivers/mmc/mmc.c
-+++ b/drivers/mmc/mmc.c
-@@ -1491,6 +1491,38 @@ static void do_preinit(void)
- }
- 
- 
-+/* enable hardware reset signal */
-+int mmc_set_rst_n(struct mmc *mmc, u8 val)
-+{
-+	ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, 512);
-+	int err;
-+
-+	memset(ext_csd, 0, 512);
-+	err = mmc_send_ext_csd(mmc, ext_csd);
-+	if (err)
-+		return err;
-+
-+	printf("before: RST_N=0x%02x\n",
-+			(unsigned int)ext_csd[EXT_CSD_RST_N_FUNCTION] & 0xff);
-+
-+	printf("setting rstn to 0x%02x\n", (unsigned int)val & 0xff);
-+
-+	err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
-+			EXT_CSD_RST_N_FUNCTION, val);
-+	if (err)
-+		return err;
-+
-+	memset(ext_csd, 0, 512);
-+	err = mmc_send_ext_csd(mmc, ext_csd);
-+	if (err)
-+		return err;
-+
-+	printf("after: RST_N=0x%02x\n",
-+			(unsigned int)ext_csd[EXT_CSD_RST_N_FUNCTION] & 0xff);
-+
-+	return 0;
-+}
-+
- int mmc_initialize(bd_t *bis)
- {
- 	INIT_LIST_HEAD (&mmc_devices);
-diff --git a/include/mmc.h b/include/mmc.h
-index 583c30e..a9f68dc 100644
---- a/include/mmc.h
-+++ b/include/mmc.h
-@@ -165,6 +165,7 @@
-  */
- #define EXT_CSD_GP_SIZE_MULT		143	/* R/W */
- #define EXT_CSD_PARTITIONING_SUPPORT	160	/* RO */
-+#define EXT_CSD_RST_N_FUNCTION          162     /* R/W */
- #define EXT_CSD_RPMB_MULT		168	/* RO */
- #define EXT_CSD_ERASE_GROUP_DEF		175	/* R/W */
- #define EXT_CSD_BOOT_BUS_WIDTH		177
-@@ -178,6 +179,7 @@
- #define EXT_CSD_HC_ERASE_GRP_SIZE	224	/* RO */
- #define EXT_CSD_BOOT_MULT		226	/* RO */
- 
-+
- /*
-  * EXT_CSD field definitions
-  */
-@@ -357,4 +359,6 @@ struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
- int mmc_legacy_init(int verbose);
- #endif
- 
-+int mmc_set_rst_n(struct mmc *mmc, u8 val);
-+
- #endif /* _MMC_H_ */
--- 
-1.8.3.1
-

0015-wandboard-add-pxe-support-set-default-boot-command-l.patch

@@ -1,97 +0,0 @@
-From e156720cf4ca48c3e955b0e48f17bf324fe992f4 Mon Sep 17 00:00:00 2001
-From: Dennis Gilmore <dennis@ausil.us>
-Date: Wed, 17 Jul 2013 09:11:57 -0500
-Subject: [PATCH 15/15] wandboard: add pxe support, set default boot command
- like highbank
-
----
- include/configs/wandboard.h | 42 +++++++++++++++++++++++++++++++++++++++---
- 1 file changed, 39 insertions(+), 3 deletions(-)
-
-diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
-index ee6bf21..159f950 100644
---- a/include/configs/wandboard.h
-+++ b/include/configs/wandboard.h
-@@ -58,6 +58,8 @@
- #define CONFIG_LOADADDR			0x12000000
- #define CONFIG_SYS_TEXT_BASE		0x17800000
- 
-+#define CONFIG_SUPPORT_RAW_INITRD
-+
- /* MMC Configuration */
- #define CONFIG_FSL_ESDHC
- #define CONFIG_FSL_USDHC
-@@ -72,6 +74,14 @@
- #define CONFIG_CMD_FAT
- #define CONFIG_DOS_PARTITION
- 
-+/* PXE support */
-+#define CONFIG_BOOTP_PXE
-+#define CONFIG_BOOTP_PXE_CLIENTARCH     0x100
-+#define CONFIG_BOOTP_VCI_STRING         "U-boot.armv7.wandboard"
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+
-+
- /* Ethernet Configuration */
- #define CONFIG_CMD_PING
- #define CONFIG_CMD_DHCP
-@@ -117,7 +127,32 @@
- 	"initrd_high=0xffffffff\0" \
- 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
- 	"fdt_addr=0x11000000\0" \
-+	"pxefile_addr_r=0x12000000\0" \
-+	"kernel_addr_r=0x13000000\0" \
-+	"ramdisk_addr_r=0x32000000\0" \
-+	"fdt_addr_r=0x11000000\0" \
- 	"boot_fdt=try\0" \
-+	"bootcmd_setup=mmc rescan\0" \
-+	"bootcmd_pxe=setenv bootfile \"\" ;dhcp; pxe get; pxe boot\0" \
-+	"bootcmd_disk_scr=ext2load ${boot_ifc} ${bootdevice} ${scr_addr_r} boot.scr && source ${scr_addr_r}\0" \
-+	"bootcmd_disk_sysboot1=setenv bootfile /boot/extlinux/extlinux.conf; sysboot ${boot_ifc} ${bootdevice} ext2\0" \
-+	"bootcmd_disk_sysboot2=setenv bootfile /extlinux/extlinux.conf; sysboot ${boot_ifc} ${bootdevice} ext2\0" \
-+	"bootcmd_disk_uenv=ext2load ${boot_ifc} ${bootdevice} ${uenv_addr_r} uEnv.txt; env import -t ${uenv_addr_r} ${filesize}; run bootcmd_uenv\0" \
-+	"bootcmd_disk_kernel=ext2load ${boot_ifc} ${bootdevice} ${kernel_addr_r} vmlinuz && ext2load ${boot_ifc} ${bootdevice} ${ramdisk_addr_r} initrd.img && bootz ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr}\0" \
-+	"bootcmd_disk=run bootcmd_disk_sysboot1; run bootcmd_disk_sysboot2; run bootcmd_disk_uenv; run bootcmd_disk_scr; run bootcmd_disk_kernel\0" \
-+	"bootcmd_sata=setenv boot_ifc scsi; scsi scan && run bootcmd_disk\0" \
-+	"bootcmd_mmc=setenv boot_ifc mmc; mmc rescan && run bootcmd_disk\0" \
-+	"bootcmd_default=run bootcmd_mmc; run bootcmd_sata; run bootcmd_pxe\0" \
-+	"bootcmd0=run bootcmd_setup; run bootcmd_default\0" \
-+	"bootcmd1=run bootcmd_setup; run bootcmd_pxe; run bootcmd_default\0" \
-+	"bootcmd2=run bootcmd_setup; run bootcmd_sata; run bootcmd_default\0" \
-+	"bootcmd15=run bootcmd_setup; run bootcmd_mmc; run bootcmd_default\0" \
-+	"localcmd=run bootcmd_sata\0" \
-+	"bootdevice=0\0" \
-+	"bootargs=console=ttymxc0 root=LABEL=rootfs\0" \
-+	"bootdelay=2\0" \
-+	"bootretry=90\0" \
-+	"netretry=once\0" \
- 	"ip_dyn=yes\0" \
- 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
- 	"mmcpart=1\0" \
-@@ -139,11 +174,11 @@
- 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
- 		"root=${mmcroot}\0" \
- 	"loadbootscript=" \
--		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-+		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- 	"bootscript=echo Running bootscript from mmc ...; " \
- 		"source\0" \
--	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
--	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-+	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
-+	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- 	"mmcboot=echo Booting from mmc ...; " \
- 		"run mmcargs; " \
- 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-@@ -186,6 +221,7 @@
- 
- #define CONFIG_BOOTCOMMAND \
- 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-+		   "run bootcmd_default; " \
- 		   "if run loadbootscript; then " \
- 			   "run bootscript; " \
- 		   "else " \
--- 
-1.8.3.1
-

AllWinner-PineTab.patch

@@ -0,0 +1,45 @@
+From 6bf15552c2b6becb48ce7732120e0ddb2078cb1a Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Tue, 14 Apr 2020 09:53:07 +0100
+Subject: [PATCH 9/9] initial pinetab support
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ configs/pinetab_defconfig | 26 ++++++++++++++++++++++++++
+ 1 file changed, 26 insertions(+)
+ create mode 100644 configs/pinetab_defconfig
+
+diff --git a/configs/pinetab_defconfig b/configs/pinetab_defconfig
+new file mode 100644
+index 0000000000..5b9620f3e5
+--- /dev/null
++++ b/configs/pinetab_defconfig
+@@ -0,0 +1,26 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_SPL=y
++CONFIG_MACH_SUN50I=y
++CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
++CONFIG_DRAM_CLK=552
++CONFIG_DRAM_ZQ=3881949
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2
++CONFIG_R_I2C_ENABLE=y
++CONFIG_SPL_SPI_SUNXI=y
++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
++CONFIG_USE_PREBOOT=y
++# CONFIG_SPL_DOS_PARTITION is not set
++# CONFIG_SPL_EFI_PARTITION is not set
++CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinetab"
++CONFIG_OF_LIST="sun50i-a64-pinetab"
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_SUNXI=y
++CONFIG_LED=y
++CONFIG_LED_GPIO=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
+-- 
+2.26.0

aarch64-boards

@@ -0,0 +1,75 @@
+a64-olinuxino
+amarula_a64_relic
+bananapi_m2_plus_h5
+bananapi_m64
+dragonboard410c
+dragonboard820c
+espresso7420
+evb-rk3328
+evb-rk3399
+ficus-rk3399
+firefly-rk3399
+geekbox
+hikey
+khadas-edge-captain-rk3399
+khadas-edge-v-rk3399
+khadas-edge-rk3399
+khadas-vim
+khadas-vim2
+khadas-vim3
+khadas-vim3l
+libretech-ac
+libretech_all_h3_cc_h5
+libretech_all_h3_it_h5
+libretech_all_h5_cc_h5
+libretech-cc
+mvebu_espressobin-88f3720
+mvebu_mcbin-88f8040
+nanopc-t4-rk3399
+nanopi_a64
+nanopi-k2
+nanopi-m4-rk3399
+nanopi-m4-2gb-rk3399
+nanopi_neo2
+nanopi-neo4-rk3399
+nanopi_neo_plus2
+odroid-c2
+orangepi_lite2
+orangepi_one_plus
+orangepi_pc2
+orangepi_prime
+orangepi-rk3399
+orangepi_win
+orangepi_zero_plus
+orangepi_zero_plus2
+p212
+p2371-2180
+p2771-0000-500
+p3450-0000
+pine64-lts
+pine64_plus
+pinebook
+pinebook-pro-rk3399
+pinephone
+pinetab
+pine_h64
+poplar
+puma-rk3399
+rock64-rk3328
+rock960-rk3399
+rock-pi-4-rk3399
+rock-pi-4c-rk3399
+rock-pi-e-rk3328
+rock-pi-n10-rk3399pro
+rockpro64-rk3399
+roc-cc-rk3328
+roc-pc-rk3399
+roc-pc-mezzanine-rk3399
+rpi_3
+rpi_4
+rpi_arm64
+sopine_baseboard
+teres_i
+turris_mox
+vexpress_aemv8a_juno
+xilinx_zynqmp_virt

arm-boards

@@ -0,0 +1,143 @@
+A10-OLinuXino-Lime
+A10s-OLinuXino-M
+A13-OLinuXino
+A13-OLinuXinoM
+A20-Olimex-SOM-EVB
+A20-OLinuXino-Lime
+A20-OLinuXino-Lime2
+A20-OLinuXino_MICRO
+am335x_evm
+am57xx_evm
+Ampe_A76
+apalis_imx6
+arndale
+Auxtek-T003
+Auxtek-T004
+ba10_tv_box
+Bananapi
+bananapi_m1_plus
+bananapi_m2_berry
+Bananapi_m2m
+bananapi_m2_plus_h3
+Bananapi_M2_Ultra
+bananapi_m2_zero
+Bananapro
+chiliboard
+CHIP
+Chuwi_V7_CW0825
+clearfog
+cm_fx6
+Colombus
+colorfly_e708_q1
+CSQ_CS908
+Cubieboard
+Cubieboard2
+Cubieboard4
+Cubietruck
+Cubietruck_plus
+db-mv784mp-gp
+difrnce_dit4350
+dserve_dsrv9703c
+evb-rk3229
+firefly-rk3288
+helios4
+Hummingbird_A31
+Hyundai_A7HD
+i12-tvbox
+icnova-a20-swac
+inet1
+iNet_3F
+iNet_3W
+inet86dz
+iNet_86VS
+inet97fv2
+inet98v_rev2
+inet9f_rev03
+inet_q972
+Itead_Ibox_A20
+jesurun_q5
+jetson-tk1
+kc1
+Lamobo_R1
+libretech_all_h3_cc_h2_plus
+Linksprite_pcDuino
+Linksprite_pcDuino3
+Linksprite_pcDuino3_Nano
+liteboard
+marsboard
+Marsboard_A10
+Mele_A1000
+Mele_A1000G_quad
+Mele_I7
+Mele_M3
+Mele_M5
+Mele_M9
+Mini-X
+mk802
+mk802_a10s
+mk802ii
+MK808C
+MSI_Primo73
+MSI_Primo81
+mx6cuboxi
+nanopi_m1
+nanopi_m1_plus
+nanopi_neo
+novena
+odroid
+odroid-xu3
+omap3_beagle
+omap4_panda
+omap5_uevm
+Orangepi
+orangepi_2
+orangepi_lite
+Orangepi_mini
+orangepi_one
+orangepi_pc
+orangepi_pc_plus
+orangepi_plus
+orangepi_plus2e
+orangepi_r1
+orangepi_zero
+origen
+paz00
+pinecube
+polaroid_mid2809pxe04
+pov_protab2_ips9
+q8_a13_tablet
+q8_a23_tablet_800x480
+q8_a33_tablet_1024x600
+q8_a33_tablet_800x480
+qemu_arm
+r7-tv-dongle
+riotboard
+rock
+rock-pi-n8-rk3288
+rock2
+rpi_2
+rpi_3_32b
+rpi_4_32b
+Sinlinx_SinA31s
+Sinovoip_BPI_M2
+Sinovoip_BPI_M3
+stih410-b2260
+stm32mp15_basic
+sunxi_Gemei_G9
+tbs_a711
+tinker-rk3288
+tinker-s-rk3288
+trimslice
+udoo
+udoo_neo
+usbarmory
+UTOO_P66
+vexpress_ca15_tc2
+vexpress_ca9x4
+wandboard
+warp
+warp7
+Wexler_TAB7200
+Wits_Pro_A20_DKT
+Yones_Toptech_BS1078_V2
+xilinx_zynq_virt

arm-chromebooks

@@ -0,0 +1,8 @@
+chromebit_mickey_defconfig
+chromebook_jerry_defconfig
+chromebook_minnie_defconfig
+nyan-big_defconfig
+peach-pi_defconfig
+peach-pit_defconfig
+snow_defconfig
+spring_defconfig

arm-rk3399-enable-rng-on-rock960-and-firefly3399.patch

@@ -0,0 +1,135 @@
+From 5cb3ca7ebd46c1983d0929b5ba027a03c1f5e51e Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Wed, 16 Dec 2020 15:22:34 +0000
+Subject: [PATCH 1/2] arm: dts: rockchip: rk3399: enable rng at the SoC level
+
+The rng is embedded in the SoC so enable it in the device tree
+universally, the use of it can be controlled by enabling/disabling
+at the device config level.
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ arch/arm/dts/rk3399-evb-u-boot.dtsi          | 4 ----
+ arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi | 4 ----
+ arch/arm/dts/rk3399-rockpro64-u-boot.dtsi    | 4 ----
+ arch/arm/dts/rk3399-u-boot.dtsi              | 2 +-
+ 4 files changed, 1 insertion(+), 13 deletions(-)
+
+diff --git a/arch/arm/dts/rk3399-evb-u-boot.dtsi b/arch/arm/dts/rk3399-evb-u-boot.dtsi
+index 8056dc843e..398b205ec2 100644
+--- a/arch/arm/dts/rk3399-evb-u-boot.dtsi
++++ b/arch/arm/dts/rk3399-evb-u-boot.dtsi
+@@ -13,10 +13,6 @@
+ 	};
+ };
+ 
+-&rng {
+-	status = "okay";
+-};
+-
+ &i2c0 {
+ 	u-boot,dm-pre-reloc;
+ };
+diff --git a/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
+index ded7db0aef..c3e866a779 100644
+--- a/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
++++ b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
+@@ -28,10 +28,6 @@
+ 	u-boot,dm-pre-reloc;
+ };
+ 
+-&rng {
+-	status = "okay";
+-};
+-
+ &sdhci {
+ 	max-frequency = <25000000>;
+ 	u-boot,dm-pre-reloc;
+diff --git a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
+index 6317b47e41..37dff04adf 100644
+--- a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
++++ b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
+@@ -15,10 +15,6 @@
+ 	};
+ };
+ 
+-&rng {
+-	status = "okay";
+-};
+-
+ &spi1 {
+ 	spi_flash: flash@0 {
+ 		u-boot,dm-pre-reloc;
+diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
+index ecd230c720..73922c328a 100644
+--- a/arch/arm/dts/rk3399-u-boot.dtsi
++++ b/arch/arm/dts/rk3399-u-boot.dtsi
+@@ -32,7 +32,7 @@
+ 	rng: rng@ff8b8000 {
+ 		compatible = "rockchip,cryptov1-rng";
+ 		reg = <0x0 0xff8b8000 0x0 0x1000>;
+-		status = "disabled";
++		status = "okay";
+ 	};
+ 
+ 	dmc: dmc {
+-- 
+2.29.2
+
+From 62093137fcbe760d009cf2757feda7ccf328fbb7 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Wed, 16 Dec 2020 15:37:21 +0000
+Subject: [PATCH 2/2] configs: rk3399: enable rng on firefly/rock960/rockpro64
+
+Enable the RNG on the Firefly, rock960 and RockPro64 devices
+to enable KASLR on devices that support it.
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ configs/firefly-rk3399_defconfig   | 2 ++
+ configs/rock960-rk3399_defconfig   | 2 ++
+ configs/rockpro64-rk3399_defconfig | 2 ++
+ 3 files changed, 6 insertions(+)
+
+diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
+index c453b82dc5..cfbaae40aa 100644
+--- a/configs/firefly-rk3399_defconfig
++++ b/configs/firefly-rk3399_defconfig
+@@ -35,6 +35,8 @@ CONFIG_MMC_DW=y
+ CONFIG_MMC_DW_ROCKCHIP=y
+ CONFIG_MMC_SDHCI=y
+ CONFIG_MMC_SDHCI_ROCKCHIP=y
++CONFIG_DM_RNG=y
++CONFIG_RNG_ROCKCHIP=y
+ CONFIG_SF_DEFAULT_SPEED=20000000
+ CONFIG_DM_ETH=y
+ CONFIG_ETH_DESIGNWARE=y
+diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
+index 65dce3cd73..aadbc55f57 100644
+--- a/configs/rock960-rk3399_defconfig
++++ b/configs/rock960-rk3399_defconfig
+@@ -39,6 +39,8 @@ CONFIG_MMC_DW_ROCKCHIP=y
+ CONFIG_MMC_SDHCI=y
+ CONFIG_MMC_SDHCI_SDMA=y
+ CONFIG_MMC_SDHCI_ROCKCHIP=y
++CONFIG_DM_RNG=y
++CONFIG_RNG_ROCKCHIP=y
+ CONFIG_DM_ETH=y
+ CONFIG_NVME=y
+ CONFIG_PCI=y
+diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
+index 575b7a20d5..f78dfcc8f7 100644
+--- a/configs/rockpro64-rk3399_defconfig
++++ b/configs/rockpro64-rk3399_defconfig
+@@ -42,6 +42,8 @@ CONFIG_MMC_DW=y
+ CONFIG_MMC_DW_ROCKCHIP=y
+ CONFIG_MMC_SDHCI=y
+ CONFIG_MMC_SDHCI_ROCKCHIP=y
++CONFIG_DM_RNG=y
++CONFIG_RNG_ROCKCHIP=y
+ CONFIG_SF_DEFAULT_BUS=1
+ CONFIG_SPI_FLASH_GIGADEVICE=y
+ CONFIG_DM_ETH=y
+-- 
+2.29.2
+

dragonboard-fixes.patch

@@ -0,0 +1,115 @@
+From 8b0274a733cd1ce39ad9ad18e1bd8efdd02a40b7 Mon Sep 17 00:00:00 2001
+From: Rob Clark <robdclark@gmail.com>
+Date: Wed, 21 Jun 2017 14:21:15 -0400
+Subject: [PATCH 1/3] WIP: fix usb
+
+---
+ common/usb_storage.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/common/usb_storage.c b/common/usb_storage.c
+index d92ebb6eb19..9df3c3daaf4 100644
+--- a/common/usb_storage.c
++++ b/common/usb_storage.c
+@@ -1016,7 +1016,7 @@ static int usb_request_sense(struct scsi_cmd *srb, struct us_data *ss)
+ 
+ static int usb_test_unit_ready(struct scsi_cmd *srb, struct us_data *ss)
+ {
+-	int retries = 10;
++	int retries = 20;
+ 
+ 	do {
+ 		memset(&srb->cmd[0], 0, 12);
+@@ -1039,7 +1039,7 @@ static int usb_test_unit_ready(struct scsi_cmd *srb, struct us_data *ss)
+ 		if ((srb->sense_buf[2] == 0x02) &&
+ 		    (srb->sense_buf[12] == 0x3a))
+ 			return -1;
+-		mdelay(100);
++		mdelay(250);
+ 	} while (retries--);
+ 
+ 	return -1;
+-- 
+2.19.1
+
+From 7bf41d74ca9d58bc2243b7688f8987c1d373ea56 Mon Sep 17 00:00:00 2001
+From: Rob Clark <robdclark@gmail.com>
+Date: Mon, 3 Jul 2017 08:34:37 -0400
+Subject: [PATCH 2/3] HACK: disable emmc
+
+Hitting some timeout which makes boot take much longer.  And
+uefi/boot/rootfs partitions will be on sd-card or usb disk, etc,
+so we can just ignore emmc.
+---
+ arch/arm/dts/dragonboard410c.dts | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts
+index fa348bc621e..bfe7f15d5ed 100644
+--- a/arch/arm/dts/dragonboard410c.dts
++++ b/arch/arm/dts/dragonboard410c.dts
+@@ -106,6 +106,7 @@
+ 			#phy-cells = <0>;
+ 		};
+ 
++/*
+ 		sdhci@07824000 {
+ 			compatible = "qcom,sdhci-msm-v4";
+ 			reg = <0x7824900 0x11c 0x7824000 0x800>;
+@@ -115,6 +116,7 @@
+ 			clock = <&clkc 0>;
+ 			clock-frequency = <100000000>;
+ 		};
++*/
+ 
+ 		sdhci@07864000 {
+ 			compatible = "qcom,sdhci-msm-v4";
+-- 
+2.19.1
+
+From 871fe802cf3ab593b9332c4f36ab2b3f179d51ae Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Tue, 4 Sep 2018 12:21:59 +0100
+Subject: [PATCH 3/3] add options for dm410c config
+
+---
+ configs/dragonboard410c_defconfig | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig
+index a55abaf8df5..4ece0cafbe4 100644
+--- a/configs/dragonboard410c_defconfig
++++ b/configs/dragonboard410c_defconfig
+@@ -7,6 +7,8 @@ CONFIG_NR_DRAM_BANKS=1
+ # CONFIG_ANDROID_BOOT_IMAGE is not set
+ CONFIG_FIT=y
+ CONFIG_OF_BOARD_SETUP=y
++CONFIG_FAT_WRITE=y
++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
+ CONFIG_MISC_INIT_R=y
+ # CONFIG_DISPLAY_CPUINFO is not set
+ # CONFIG_DISPLAY_BOARDINFO is not set
+@@ -41,6 +43,13 @@ CONFIG_DM_PMIC=y
+ CONFIG_PMIC_PM8916=y
+ CONFIG_MSM_SERIAL=y
+ CONFIG_SPMI_MSM=y
++CONFIG_DM_ETH=y
++CONFIG_DM_KEYBOARD=y
++CONFIG_DM_VIDEO=y
++# CONFG_VIDEO_BPP8 is not set
++CONFIG_NO_FB_CLEAR=y
++CONFIG_VIDEO_SIMPLE=y
++CONFIG_USB_KEYBOARD=y
+ CONFIG_USB=y
+ CONFIG_DM_USB=y
+ CONFIG_USB_EHCI_HCD=y
+@@ -57,5 +66,6 @@ CONFIG_USB_HOST_ETHER=y
+ CONFIG_USB_ETHER_ASIX=y
+ CONFIG_USB_ETHER_ASIX88179=y
+ CONFIG_USB_ETHER_MCS7830=y
++CONFIG_USB_ETHER_RTL8152=y
+ CONFIG_USB_ETHER_SMSC95XX=y
+ CONFIG_OF_LIBFDT_OVERLAY=y
+-- 
+2.19.1
+

exynos-ext.patch

@@ -1,54 +0,0 @@
-Index: u-boot-2013.04rc2/include/configs/origen.h
-===================================================================
---- u-boot-2013.04rc2.orig/include/configs/origen.h
-+++ u-boot-2013.04rc2/include/configs/origen.h
-@@ -87,8 +87,11 @@
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_MMC
- #define CONFIG_CMD_FAT
-+#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
- #undef CONFIG_CMD_NET
- #undef CONFIG_CMD_NFS
-+#define CONFIG_CMD_BOOTZ			/* bootz zImage support */
-+#define CONFIG_SUPPORT_RAW_INITRD		/* bootz raw initrd support */
- 
- #define CONFIG_BOOTDELAY		3
- #define CONFIG_ZERO_BOOTDELAY_CHECK
-@@ -96,7 +99,35 @@
- #define CONFIG_SPL
- #define COPY_BL2_FNPTR_ADDR	0x02020030
- 
--#define CONFIG_BOOTCOMMAND	"fatload mmc 0 40007000 uImage; bootm 40007000"
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+	"loadaddr=0x40007000\0" \
-+	"rdaddr=0x48000000\0" \
-+	"kerneladdr=0x40007000\0" \
-+	"ramdiskaddr=0x48000000\0" \
-+	"console=ttySAC2,115200n8\0" \
-+	"mmcdev=0\0" \
-+	"bootenv=uEnv.txt\0" \
-+	"loadbootenv=ext2load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-+	"importbootenv=echo Importing environment from mmc ...; " \
-+		"env import -t $loadaddr $filesize\0" \
-+        "loadbootscript=ext2load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-+        "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-+                "source ${loadaddr}\0"
-+#define CONFIG_BOOTCOMMAND \
-+	"if mmc rescan; then " \
-+		"echo SD/MMC found on device ${mmcdev};" \
-+		"if run loadbootenv; then " \
-+			"echo Loaded environment from ${bootenv};" \
-+			"run importbootenv;" \
-+		"fi;" \
-+		"if test -n $uenvcmd; then " \
-+			"echo Running uenvcmd ...;" \
-+			"run uenvcmd;" \
-+		"fi;" \
-+		"if run loadbootscript; then " \
-+			"run bootscript; " \
-+		"fi; " \
-+	"fi;"
- 
- /* Miscellaneous configurable options */
- #define CONFIG_SYS_LONGHELP		/* undef to save memory */
-

mlo-ext.patch

@@ -1,157 +0,0 @@
-Index: u-boot-2013.04/drivers/mmc/spl_mmc.c
-===================================================================
---- u-boot-2013.04.orig/drivers/mmc/spl_mmc.c
-+++ u-boot-2013.04/drivers/mmc/spl_mmc.c
-@@ -67,6 +67,59 @@ end:
- }
- 
- #ifdef CONFIG_SPL_FAT_SUPPORT
-+static void mmc_load_image_ext2(struct mmc *mmc)
-+{
-+	s32 err;
-+	struct image_header *header;
-+	char *payloadname;
-+	int filelen;
-+	disk_partition_t part_info = {};
-+
-+	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
-+						sizeof(struct image_header));
-+
-+	if (get_partition_info(&mmc->block_dev,
-+		CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION, &part_info)) {
-+		printf("spl: no partition table found\n");
-+		hang();
-+	}
-+
-+	err = ext4fs_set_blk_dev(&mmc->block_dev, &part_info);
-+	if (!err) {
-+		printf("spl: ext4fs register err - %d\n", err);
-+		hang();
-+	}
-+
-+	err = ext4fs_mount(0);
-+	if (!err) {
-+		printf("spl: ext4fs mount err - %d\n", err);
-+		hang();
-+	}
-+
-+
-+	payloadname = "u-boot.img";
-+
-+	filelen = err = ext4fs_open(payloadname);
-+	if (err < 0) {
-+		goto end;
-+	}
-+	err = ext4fs_read((u8 *)header, sizeof(struct image_header));
-+	if (err <= 0) {
-+		goto end;
-+	}
-+
-+	spl_parse_image_header(header);
-+
-+	err = ext4fs_read((u8 *)spl_image.load_addr, filelen);
-+
-+end:
-+	if (err <= 0) {
-+		printf("spl: error reading image %s, err - %d\n",
-+			payloadname, err);
-+		hang();
-+	}
-+}
-+
- static void mmc_load_image_fat(struct mmc *mmc)
- {
- 	s32 err;
-@@ -127,7 +180,8 @@ void spl_mmc_load_image(void)
- #ifdef CONFIG_SPL_FAT_SUPPORT
- 	} else if (boot_mode == MMCSD_MODE_FAT) {
- 		debug("boot mode - FAT\n");
--		mmc_load_image_fat(mmc);
-+//		mmc_load_image_fat(mmc);
-+		mmc_load_image_ext2(mmc);
- #endif
- 	} else {
- 		puts("spl: wrong MMC boot mode\n");
-Index: u-boot-2013.04/include/configs/omap3_beagle.h
-===================================================================
---- u-boot-2013.04.orig/include/configs/omap3_beagle.h
-+++ u-boot-2013.04/include/configs/omap3_beagle.h
-@@ -55,6 +55,7 @@
- 
- #define CONFIG_OF_LIBFDT
- #define CONFIG_CMD_BOOTZ
-+#define CONFIG_SUPPORT_RAW_INITRD		/* bootz raw initrd support */
- 
- #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
- #define CONFIG_SETUP_MEMORY_TAGS	1
-@@ -255,7 +256,7 @@
- 		"root=${nandroot} " \
- 		"rootfstype=${nandrootfstype}\0" \
- 	"bootenv=uEnv.txt\0" \
--	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-+	"loadbootenv=ext2load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
- 	"importbootenv=echo Importing environment from mmc ...; " \
- 		"env import -t $loadaddr $filesize\0" \
- 	"ramargs=setenv bootargs console=${console} " \
-@@ -267,8 +268,8 @@
- 		"omapdss.def_disp=${defaultdisplay} " \
- 		"root=${ramroot} " \
- 		"rootfstype=${ramrootfstype}\0" \
--	"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
--	"loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
-+	"loadramdisk=ext2load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
-+	"loaduimagefat=ext2load mmc ${mmcdev} ${loadaddr} uImage\0" \
- 	"loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage\0" \
- 	"mmcboot=echo Booting from mmc ...; " \
- 		"run mmcargs; " \
-Index: u-boot-2013.04/include/configs/omap4_common.h
-===================================================================
---- u-boot-2013.04.orig/include/configs/omap4_common.h
-+++ u-boot-2013.04/include/configs/omap4_common.h
-@@ -126,6 +126,7 @@
- #define CONFIG_CMD_FAT		/* FAT support                  */
- #define CONFIG_CMD_I2C		/* I2C serial bus support	*/
- #define CONFIG_CMD_MMC		/* MMC support                  */
-+#define CONFIG_SUPPORT_RAW_INITRD	/* bootz raw initrd support */
- 
- /* Disabled commands */
- #undef CONFIG_CMD_NET
-@@ -162,10 +163,10 @@
- 		"vram=${vram} " \
- 		"root=${mmcroot} " \
- 		"rootfstype=${mmcrootfstype}\0" \
--	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-+	"loadbootscript=ext2load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
- 	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
- 		"source ${loadaddr}\0" \
--	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
-+	"loadbootenv=ext2load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
- 	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
- 		"env import -t ${loadaddr} ${filesize}\0" \
- 	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-Index: u-boot-2013.04/spl/Makefile
-===================================================================
---- u-boot-2013.04.orig/spl/Makefile
-+++ u-boot-2013.04/spl/Makefile
-@@ -72,6 +72,7 @@ LIBS-$(CONFIG_SPL_SERIAL_SUPPORT) += dri
- LIBS-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/libspi_flash.o
- LIBS-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/libspi.o
- LIBS-$(CONFIG_SPL_FAT_SUPPORT) += fs/fat/libfat.o
-+LIBS-$(CONFIG_SPL_FAT_SUPPORT) += fs/ext4/libext4fs.o
- LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/libgeneric.o
- LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/libpower.o
- LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/libnand.o
-Index: u-boot-2013.04/arch/arm/cpu/armv7/omap3/board.c
-===================================================================
---- u-boot-2013.04.orig/arch/arm/cpu/armv7/omap3/board.c
-+++ u-boot-2013.04/arch/arm/cpu/armv7/omap3/board.c
-@@ -77,6 +77,8 @@ u32 omap3_boot_device = BOOT_DEVICE_NAND
- /* auto boot mode detection is not possible for OMAP3 - hard code */
- u32 spl_boot_mode(void)
- {
-+        return MMCSD_MODE_FAT;
-+
- 	switch (spl_boot_device()) {
- 	case BOOT_DEVICE_MMC2:
- 		return MMCSD_MODE_RAW;
-

omap4-panda-memtiming.patch

@@ -1,11 +0,0 @@
---- u-boot-2013.07/include/configs/omap4_common.h.orig	2013-09-01 19:46:54.646300234 +0100
-+++ u-boot-2013.07/include/configs/omap4_common.h	2013-09-01 19:47:11.972540353 +0100
-@@ -255,8 +255,6 @@
- #define CONFIG_SYS_CACHELINE_SIZE	32
- 
- /* Defines for SDRAM init */
--#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
--
- #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
- #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
- #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS

rng-Add-iProc-RNG200-driver.patch

@@ -0,0 +1,450 @@
+From patchwork Tue Dec 15 09:49:23 2020
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: mbrugger <matthias.bgg@kernel.org>
+X-Patchwork-Id: 1416366
+X-Patchwork-Delegate: matthias.bgg@gmail.com
+Return-Path: <u-boot-bounces@lists.denx.de>
+X-Original-To: incoming@patchwork.ozlabs.org
+Delivered-To: patchwork-incoming@bilbo.ozlabs.org
+Authentication-Results: ozlabs.org;
+ spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
+ (client-ip=85.214.62.61; helo=phobos.denx.de;
+ envelope-from=u-boot-bounces@lists.denx.de; receiver=<UNKNOWN>)
+Authentication-Results: ozlabs.org;
+ dmarc=fail (p=none dis=none) header.from=kernel.org
+Received: from phobos.denx.de (phobos.denx.de [85.214.62.61])
+	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+	 key-exchange X25519 server-signature RSA-PSS (4096 bits))
+	(No client certificate requested)
+	by ozlabs.org (Postfix) with ESMTPS id 4CwD58649Dz9s0b
+	for <incoming@patchwork.ozlabs.org>; Tue, 15 Dec 2020 20:49:53 +1100 (AEDT)
+Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
+	by phobos.denx.de (Postfix) with ESMTP id 4EC6082956;
+	Tue, 15 Dec 2020 10:49:42 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=fail (p=none dis=none) header.from=kernel.org
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
+Received: by phobos.denx.de (Postfix, from userid 109)
+ id B1A738295E; Tue, 15 Dec 2020 10:49:40 +0100 (CET)
+X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
+X-Spam-Level: 
+X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00,RCVD_IN_DNSWL_HI,
+ SPF_HELO_NONE autolearn=ham autolearn_force=no version=3.4.2
+Received: from mail.kernel.org (mail.kernel.org [198.145.29.99])
+ (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits))
+ (No client certificate requested)
+ by phobos.denx.de (Postfix) with ESMTPS id 38FB382955
+ for <u-boot@lists.denx.de>; Tue, 15 Dec 2020 10:49:37 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=pass (p=none dis=none) header.from=kernel.org
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=matthias.bgg@kernel.org
+From: matthias.bgg@kernel.org
+Authentication-Results: mail.kernel.org;
+ dkim=permerror (bad message/signature format)
+To: sughosh.ganu@linaro.org,
+	xypron.glpk@gmx.de
+Cc: u-boot@lists.denx.de,
+	Matthias Brugger <mbrugger@suse.com>
+Subject: [PATCH v2 1/2] rng: Add iProc RNG200 driver
+Date: Tue, 15 Dec 2020 10:49:23 +0100
+Message-Id: <20201215094924.30072-1-matthias.bgg@kernel.org>
+X-Mailer: git-send-email 2.29.2
+MIME-Version: 1.0
+X-BeenThere: u-boot@lists.denx.de
+X-Mailman-Version: 2.1.34
+Precedence: list
+List-Id: U-Boot discussion <u-boot.lists.denx.de>
+List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
+List-Archive: <https://lists.denx.de/pipermail/u-boot/>
+List-Post: <mailto:u-boot@lists.denx.de>
+List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
+List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=subscribe>
+Errors-To: u-boot-bounces@lists.denx.de
+Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
+X-Virus-Scanned: clamav-milter 0.102.3 at phobos.denx.de
+X-Virus-Status: Clean
+
+From: Matthias Brugger <mbrugger@suse.com>
+
+Add support for random number generator RNG200.
+This is for example found on RPi4.
+
+Signed-off-by: Matthias Brugger <mbrugger@suse.com>
+Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
+---
+
+Changes in v2: None
+
+ drivers/rng/Kconfig        |   6 ++
+ drivers/rng/Makefile       |   1 +
+ drivers/rng/iproc_rng200.c | 186 +++++++++++++++++++++++++++++++++++++
+ 3 files changed, 193 insertions(+)
+ create mode 100644 drivers/rng/iproc_rng200.c
+
+diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig
+index 11001c8ae7..94915d45b3 100644
+--- a/drivers/rng/Kconfig
++++ b/drivers/rng/Kconfig
+@@ -46,4 +46,10 @@ config RNG_ROCKCHIP
+ 	  Enable random number generator for rockchip.This driver is
+ 	  support rng module of crypto v1 and crypto v2.
+ 
++config RNG_IPROC200
++	bool "Broadcom iProc RNG200 random number generator"
++	depends on DM_RNG
++	default n
++	help
++	  Enable random number generator for RPI4.
+ endif
+diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile
+index 8953406882..39f7ee3f03 100644
+--- a/drivers/rng/Makefile
++++ b/drivers/rng/Makefile
+@@ -9,3 +9,4 @@ obj-$(CONFIG_RNG_SANDBOX) += sandbox_rng.o
+ obj-$(CONFIG_RNG_MSM) += msm_rng.o
+ obj-$(CONFIG_RNG_STM32MP1) += stm32mp1_rng.o
+ obj-$(CONFIG_RNG_ROCKCHIP) += rockchip_rng.o
++obj-$(CONFIG_RNG_IPROC200) += iproc_rng200.o
+diff --git a/drivers/rng/iproc_rng200.c b/drivers/rng/iproc_rng200.c
+new file mode 100644
+index 0000000000..1063f43953
+--- /dev/null
++++ b/drivers/rng/iproc_rng200.c
+@@ -0,0 +1,186 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++/*
++ * Copyright 2020, Matthias Brugger <mbrugger@suse.com>
++ *
++ * Driver for Raspberry Pi hardware random number generator
++ */
++
++#include <common.h>
++#include <dm.h>
++#include <linux/delay.h>
++#include <rng.h>
++#include <asm/io.h>
++
++#define usleep_range(a, b) udelay((b))
++
++#define RNG_CTRL_OFFSET					0x00
++#define RNG_CTRL_RNG_RBGEN_MASK				0x00001FFF
++#define RNG_CTRL_RNG_RBGEN_ENABLE			0x00000001
++#define RNG_CTRL_RNG_RBGEN_DISABLE			0x00000000
++
++#define RNG_SOFT_RESET_OFFSET				0x04
++#define RNG_SOFT_RESET					0x00000001
++
++#define RBG_SOFT_RESET_OFFSET				0x08
++#define RBG_SOFT_RESET					0x00000001
++
++#define RNG_INT_STATUS_OFFSET				0x18
++#define RNG_INT_STATUS_MASTER_FAIL_LOCKOUT_IRQ_MASK	0x80000000
++#define RNG_INT_STATUS_NIST_FAIL_IRQ_MASK		0x00000020
++
++#define RNG_FIFO_DATA_OFFSET				0x20
++
++#define RNG_FIFO_COUNT_OFFSET				0x24
++#define RNG_FIFO_COUNT_RNG_FIFO_COUNT_MASK		0x000000FF
++
++struct iproc_rng200_platdata {
++	fdt_addr_t base;
++};
++
++static void iproc_rng200_enable(struct iproc_rng200_platdata *pdata, bool enable)
++{
++	fdt_addr_t rng_base = pdata->base;
++	u32 val;
++
++	val = readl(rng_base + RNG_CTRL_OFFSET);
++	val &= ~RNG_CTRL_RNG_RBGEN_MASK;
++	if (enable)
++		val |= RNG_CTRL_RNG_RBGEN_ENABLE;
++	else
++		val &= ~RNG_CTRL_RNG_RBGEN_ENABLE;
++
++	writel(val, rng_base + RNG_CTRL_OFFSET);
++
++}
++
++static void iproc_rng200_restart(struct iproc_rng200_platdata *pdata)
++{
++	fdt_addr_t rng_base = pdata->base;
++	u32 val;
++
++	iproc_rng200_enable(pdata, false);
++
++	/* Clear all interrupt status */
++	writel(0xFFFFFFFFUL, rng_base + RNG_INT_STATUS_OFFSET);
++
++	/* Reset RNG and RBG */
++	val = readl(rng_base + RBG_SOFT_RESET_OFFSET);
++	val |= RBG_SOFT_RESET;
++	writel(val, rng_base + RBG_SOFT_RESET_OFFSET);
++
++	val = readl(rng_base + RNG_SOFT_RESET_OFFSET);
++	val |= RNG_SOFT_RESET;
++	writel(val, rng_base + RNG_SOFT_RESET_OFFSET);
++
++	val = readl(rng_base + RNG_SOFT_RESET_OFFSET);
++	val &= ~RNG_SOFT_RESET;
++	writel(val, rng_base + RNG_SOFT_RESET_OFFSET);
++
++	val = readl(rng_base + RBG_SOFT_RESET_OFFSET);
++	val &= ~RBG_SOFT_RESET;
++	writel(val, rng_base + RBG_SOFT_RESET_OFFSET);
++
++	iproc_rng200_enable(pdata, true);
++}
++
++static int iproc_rng200_read(struct udevice *dev, void *data, size_t len)
++{
++	struct iproc_rng200_platdata *priv = dev_get_platdata(dev);
++	char *buf = (char *)data;
++	u32 num_remaining = len;
++	u32 status;
++
++	#define MAX_RESETS_PER_READ	1
++	u32 num_resets = 0;
++
++	while (num_remaining > 0) {
++
++		/* Is RNG sane? If not, reset it. */
++		status = readl(priv->base + RNG_INT_STATUS_OFFSET);
++		if ((status & (RNG_INT_STATUS_MASTER_FAIL_LOCKOUT_IRQ_MASK |
++			RNG_INT_STATUS_NIST_FAIL_IRQ_MASK)) != 0) {
++
++			if (num_resets >= MAX_RESETS_PER_READ)
++				return len - num_remaining;
++
++			iproc_rng200_restart(priv);
++			num_resets++;
++		}
++
++		/* Are there any random numbers available? */
++		if ((readl(priv->base + RNG_FIFO_COUNT_OFFSET) &
++				RNG_FIFO_COUNT_RNG_FIFO_COUNT_MASK) > 0) {
++
++			if (num_remaining >= sizeof(u32)) {
++				/* Buffer has room to store entire word */
++				*(u32 *)buf = readl(priv->base +
++							RNG_FIFO_DATA_OFFSET);
++				buf += sizeof(u32);
++				num_remaining -= sizeof(u32);
++			} else {
++				/* Buffer can only store partial word */
++				u32 rnd_number = readl(priv->base +
++							RNG_FIFO_DATA_OFFSET);
++				memcpy(buf, &rnd_number, num_remaining);
++				buf += num_remaining;
++				num_remaining = 0;
++			}
++
++		} else {
++			/* Can wait, give others chance to run */
++			usleep_range(min(num_remaining * 10, 500U), 500);
++		}
++	}
++
++	return 0;
++}
++
++static int iproc_rng200_probe(struct udevice *dev)
++{
++	struct iproc_rng200_platdata *priv = dev_get_platdata(dev);
++
++	iproc_rng200_enable(priv, true);
++
++	return 0;
++}
++
++static int iproc_rng200_remove(struct udevice *dev)
++{
++	struct iproc_rng200_platdata *priv = dev_get_platdata(dev);
++
++	iproc_rng200_enable(priv, false);
++
++	return 0;
++}
++
++static int iproc_rng200_ofdata_to_platdata(struct udevice *dev)
++{
++	struct iproc_rng200_platdata *pdata = dev_get_platdata(dev);
++
++	pdata->base = dev_read_addr(dev);
++	if (!pdata->base)
++		return -ENODEV;
++
++	return 0;
++}
++
++static const struct dm_rng_ops iproc_rng200_ops = {
++	.read = iproc_rng200_read,
++};
++
++static const struct udevice_id iproc_rng200_rng_match[] = {
++	{ .compatible = "brcm,bcm2711-rng200", },
++	{ .compatible = "brcm,iproc-rng200", },
++	{},
++};
++
++U_BOOT_DRIVER(iproc_rng200_rng) = {
++	.name = "iproc_rng200-rng",
++	.id = UCLASS_RNG,
++	.of_match = iproc_rng200_rng_match,
++	.ops = &iproc_rng200_ops,
++	.probe = iproc_rng200_probe,
++	.remove = iproc_rng200_remove,
++	.platdata_auto_alloc_size = sizeof(struct iproc_rng200_platdata),
++	.ofdata_to_platdata = iproc_rng200_ofdata_to_platdata,
++};
+
+From patchwork Tue Dec 15 09:49:24 2020
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: mbrugger <matthias.bgg@kernel.org>
+X-Patchwork-Id: 1416367
+X-Patchwork-Delegate: matthias.bgg@gmail.com
+Return-Path: <u-boot-bounces@lists.denx.de>
+X-Original-To: incoming@patchwork.ozlabs.org
+Delivered-To: patchwork-incoming@bilbo.ozlabs.org
+Authentication-Results: ozlabs.org;
+ spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
+ (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de;
+ envelope-from=u-boot-bounces@lists.denx.de; receiver=<UNKNOWN>)
+Authentication-Results: ozlabs.org;
+ dmarc=fail (p=none dis=none) header.from=kernel.org
+Received: from phobos.denx.de (phobos.denx.de
+ [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01])
+	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+	 key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest
+ SHA256)
+	(No client certificate requested)
+	by ozlabs.org (Postfix) with ESMTPS id 4CwD5D4Gf2z9s0b
+	for <incoming@patchwork.ozlabs.org>; Tue, 15 Dec 2020 20:50:08 +1100 (AEDT)
+Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
+	by phobos.denx.de (Postfix) with ESMTP id A25E782961;
+	Tue, 15 Dec 2020 10:49:46 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=fail (p=none dis=none) header.from=kernel.org
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
+Received: by phobos.denx.de (Postfix, from userid 109)
+ id 9EC418295C; Tue, 15 Dec 2020 10:49:41 +0100 (CET)
+X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
+X-Spam-Level: 
+X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00,RCVD_IN_DNSWL_HI,
+ SPF_HELO_NONE autolearn=ham autolearn_force=no version=3.4.2
+Received: from mail.kernel.org (mail.kernel.org [198.145.29.99])
+ (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits))
+ (No client certificate requested)
+ by phobos.denx.de (Postfix) with ESMTPS id BCF5682956
+ for <u-boot@lists.denx.de>; Tue, 15 Dec 2020 10:49:38 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=pass (p=none dis=none) header.from=kernel.org
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=matthias.bgg@kernel.org
+From: matthias.bgg@kernel.org
+Authentication-Results: mail.kernel.org;
+ dkim=permerror (bad message/signature format)
+To: sughosh.ganu@linaro.org,
+	xypron.glpk@gmx.de
+Cc: u-boot@lists.denx.de,
+	Matthias Brugger <mbrugger@suse.com>
+Subject: [PATCH v2 2/2] config: Enable iProc RNG200 driver in RPi4 configs
+Date: Tue, 15 Dec 2020 10:49:24 +0100
+Message-Id: <20201215094924.30072-2-matthias.bgg@kernel.org>
+X-Mailer: git-send-email 2.29.2
+In-Reply-To: <20201215094924.30072-1-matthias.bgg@kernel.org>
+References: <20201215094924.30072-1-matthias.bgg@kernel.org>
+MIME-Version: 1.0
+X-BeenThere: u-boot@lists.denx.de
+X-Mailman-Version: 2.1.34
+Precedence: list
+List-Id: U-Boot discussion <u-boot.lists.denx.de>
+List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
+List-Archive: <https://lists.denx.de/pipermail/u-boot/>
+List-Post: <mailto:u-boot@lists.denx.de>
+List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
+List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=subscribe>
+Errors-To: u-boot-bounces@lists.denx.de
+Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
+X-Virus-Scanned: clamav-milter 0.102.3 at phobos.denx.de
+X-Virus-Status: Clean
+
+From: Matthias Brugger <mbrugger@suse.com>
+
+We find the iProc RNG200 in the Raspberry Pi 4. Add it to all it's
+config so that it can be used.
+
+Signed-off-by: Matthias Brugger <mbrugger@suse.com>
+---
+
+Changes in v2:
+- fix defconfigs using savedefconfig (Heinrich)
+
+ configs/rpi_4_32b_defconfig | 2 ++
+ configs/rpi_4_defconfig     | 2 ++
+ configs/rpi_arm64_defconfig | 2 ++
+ drivers/rng/iproc_rng200.c  | 1 -
+ 4 files changed, 6 insertions(+), 1 deletion(-)
+
+diff --git a/configs/rpi_4_32b_defconfig b/configs/rpi_4_32b_defconfig
+index 5ddd838fd5..4039e46c81 100644
+--- a/configs/rpi_4_32b_defconfig
++++ b/configs/rpi_4_32b_defconfig
+@@ -36,6 +36,8 @@ CONFIG_PCI_BRCMSTB=y
+ CONFIG_PINCTRL=y
+ # CONFIG_PINCTRL_GENERIC is not set
+ CONFIG_DM_RESET=y
++CONFIG_DM_RNG=y
++CONFIG_RNG_IPROC200=y
+ # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
+ CONFIG_USB=y
+ CONFIG_DM_USB=y
+diff --git a/configs/rpi_4_defconfig b/configs/rpi_4_defconfig
+index 2590d0a696..46b6cc3046 100644
+--- a/configs/rpi_4_defconfig
++++ b/configs/rpi_4_defconfig
+@@ -36,6 +36,8 @@ CONFIG_PCI_BRCMSTB=y
+ CONFIG_PINCTRL=y
+ # CONFIG_PINCTRL_GENERIC is not set
+ CONFIG_DM_RESET=y
++CONFIG_DM_RNG=y
++CONFIG_RNG_IPROC200=y
+ # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
+ CONFIG_USB=y
+ CONFIG_DM_USB=y
+diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig
+index 2639219a1a..b75144036d 100644
+--- a/configs/rpi_arm64_defconfig
++++ b/configs/rpi_arm64_defconfig
+@@ -33,6 +33,8 @@ CONFIG_PCI_BRCMSTB=y
+ CONFIG_PINCTRL=y
+ # CONFIG_PINCTRL_GENERIC is not set
+ CONFIG_DM_RESET=y
++CONFIG_DM_RNG=y
++CONFIG_RNG_IPROC200=y
+ # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
+ CONFIG_USB=y
+ CONFIG_DM_USB=y
+diff --git a/drivers/rng/iproc_rng200.c b/drivers/rng/iproc_rng200.c
+index 1063f43953..378f6cf48d 100644
+--- a/drivers/rng/iproc_rng200.c
++++ b/drivers/rng/iproc_rng200.c
+@@ -50,7 +50,6 @@ static void iproc_rng200_enable(struct iproc_rng200_platdata *pdata, bool enable
+ 		val &= ~RNG_CTRL_RNG_RBGEN_ENABLE;
+ 
+ 	writel(val, rng_base + RNG_CTRL_OFFSET);
+-
+ }
+ 
+ static void iproc_rng200_restart(struct iproc_rng200_platdata *pdata)

rockchip-spl-u-boot-itb-offset.patch

@@ -0,0 +1,11 @@
+--- u-boot-2020.10/common/spl/Kconfig.orig	2020-10-07 12:08:54.972632715 +0100
++++ u-boot-2020.10/common/spl/Kconfig	2020-10-07 12:08:59.100672506 +0100
+@@ -324,7 +324,7 @@
+ 	default 0x200 if ARCH_SOCFPGA || ARCH_AT91
+ 	default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \
+ 		         OMAP54XX || AM33XX || AM43XX || ARCH_K3
+-	default 0x4000 if ARCH_ROCKCHIP
++	default 0x200 if ARCH_ROCKCHIP
+ 	default 0x822 if TARGET_SIFIVE_FU540
+ 	help
+ 	  Address on the MMC to load U-Boot from, when the MMC is being used

rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch

@@ -0,0 +1,96 @@
+From f10f94831450671a77f61fe413b4a57459963860 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Mon, 10 Aug 2020 22:20:29 +0100
+Subject: [PATCH] rpi: Use firmware provided device tree
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ configs/rpi_0_w_defconfig      | 2 +-
+ configs/rpi_2_defconfig        | 2 +-
+ configs/rpi_3_32b_defconfig    | 2 +-
+ configs/rpi_3_b_plus_defconfig | 2 +-
+ configs/rpi_3_defconfig        | 2 +-
+ configs/rpi_defconfig          | 2 +-
+ 6 files changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig
+index bba5e12b12..0241f4c6d3 100644
+--- a/configs/rpi_0_w_defconfig
++++ b/configs/rpi_0_w_defconfig
+@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_FS_UUID=y
+-CONFIG_OF_EMBED=y
++CONFIG_OF_BOARD=y
+ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
+index 1c2bbb29ce..9573e475f4 100644
+--- a/configs/rpi_2_defconfig
++++ b/configs/rpi_2_defconfig
+@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_FS_UUID=y
+-CONFIG_OF_EMBED=y
++CONFIG_OF_BOARD=y
+ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
+index b8a3d17f43..252df994e6 100644
+--- a/configs/rpi_3_32b_defconfig
++++ b/configs/rpi_3_32b_defconfig
+@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_FS_UUID=y
+-CONFIG_OF_EMBED=y
++CONFIG_OF_BOARD=y
+ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+diff --git a/configs/rpi_3_b_plus_defconfig b/configs/rpi_3_b_plus_defconfig
+index 4c361438fa..3b2996a2f9 100644
+--- a/configs/rpi_3_b_plus_defconfig
++++ b/configs/rpi_3_b_plus_defconfig
+@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_FS_UUID=y
+-CONFIG_OF_EMBED=y
++CONFIG_OF_BOARD=y
+ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
+index 9b281a4f15..1e9ee6122e 100644
+--- a/configs/rpi_3_defconfig
++++ b/configs/rpi_3_defconfig
+@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_FS_UUID=y
+-CONFIG_OF_EMBED=y
++CONFIG_OF_BOARD=y
+ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
+index b5ad53c37b..223fc03275 100644
+--- a/configs/rpi_defconfig
++++ b/configs/rpi_defconfig
+@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
+ CONFIG_CMD_FS_UUID=y
+-CONFIG_OF_EMBED=y
++CONFIG_OF_BOARD=y
+ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+-- 
+2.26.2
+

sources

@@ -1 +1 @@
-8445162690052e6afd4b8f87af2bb557  u-boot-2013.07.tar.bz2
+SHA512 (u-boot-2021.01-rc4.tar.bz2) = 6de2c60d02276f4eed31b5baf2d8239ad0af30c9d341339a4cd7fa0786068cb5faa1ab8bd0b4155e536962e1a4869906f60f1d2a1e50b0ed15e98c2e84d6a97b

sunxi-add-PineCube-board.patch

@@ -0,0 +1,222 @@
+From patchwork Wed Nov 18 10:27:17 2020
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Icenowy Zheng <icenowy@aosc.io>
+X-Patchwork-Id: 1402159
+X-Patchwork-Delegate: andre.przywara@arm.com
+Return-Path: <u-boot-bounces@lists.denx.de>
+X-Original-To: incoming@patchwork.ozlabs.org
+Delivered-To: patchwork-incoming@bilbo.ozlabs.org
+Authentication-Results: ozlabs.org;
+ spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de
+ (client-ip=85.214.62.61; helo=phobos.denx.de;
+ envelope-from=u-boot-bounces@lists.denx.de; receiver=<UNKNOWN>)
+Authentication-Results: ozlabs.org;
+ dmarc=none (p=none dis=none) header.from=aosc.io
+Authentication-Results: ozlabs.org;
+	dkim=fail reason="signature verification failed" (1024-bit key;
+ unprotected) header.d=mymailcheap.com header.i=@mymailcheap.com
+ header.a=rsa-sha256 header.s=default header.b=YYrkSpBD;
+	dkim=fail reason="signature verification failed" (1024-bit key;
+ unprotected) header.d=aosc.io header.i=@aosc.io header.a=rsa-sha256
+ header.s=default header.b=o7lHQ4SZ;
+	dkim-atps=neutral
+Received: from phobos.denx.de (phobos.denx.de [85.214.62.61])
+	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+	 key-exchange X25519 server-signature RSA-PSS (4096 bits))
+	(No client certificate requested)
+	by ozlabs.org (Postfix) with ESMTPS id 4CbfCp3G62z9s1l
+	for <incoming@patchwork.ozlabs.org>; Wed, 18 Nov 2020 21:28:22 +1100 (AEDT)
+Received: from h2850616.stratoserver.net (localhost [IPv6:::1])
+	by phobos.denx.de (Postfix) with ESMTP id 00D6D82304;
+	Wed, 18 Nov 2020 11:28:16 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=none (p=none dis=none) header.from=aosc.io
+Authentication-Results: phobos.denx.de;
+ spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de
+Authentication-Results: phobos.denx.de;
+	dkim=fail reason="signature verification failed" (1024-bit key;
+ unprotected) header.d=mymailcheap.com header.i=@mymailcheap.com
+ header.b="YYrkSpBD";
+	dkim=fail reason="signature verification failed" (1024-bit key;
+ unprotected) header.d=aosc.io header.i=@aosc.io header.b="o7lHQ4SZ";
+	dkim-atps=neutral
+Received: by phobos.denx.de (Postfix, from userid 109)
+ id 2E5B282309; Wed, 18 Nov 2020 11:28:11 +0100 (CET)
+X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de
+X-Spam-Level: 
+X-Spam-Status: No, score=-2.0 required=5.0 tests=BAYES_00,DKIM_SIGNED,
+ DKIM_VALID,DKIM_VALID_AU,SPF_HELO_NONE,URIBL_BLOCKED autolearn=ham
+ autolearn_force=no version=3.4.2
+Received: from relay1.mymailcheap.com (relay1.mymailcheap.com
+ [144.217.248.100])
+ (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits))
+ (No client certificate requested)
+ by phobos.denx.de (Postfix) with ESMTPS id EC082808F1
+ for <u-boot@lists.denx.de>; Wed, 18 Nov 2020 11:28:05 +0100 (CET)
+Authentication-Results: phobos.denx.de;
+ dmarc=none (p=none dis=none) header.from=aosc.io
+Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=icenowy@aosc.io
+Received: from filter2.mymailcheap.com (filter2.mymailcheap.com
+ [91.134.140.82])
+ by relay1.mymailcheap.com (Postfix) with ESMTPS id 18A423F201;
+ Wed, 18 Nov 2020 10:27:59 +0000 (UTC)
+Received: from localhost (localhost [127.0.0.1])
+ by filter2.mymailcheap.com (Postfix) with ESMTP id 6377C2A7E9;
+ Wed, 18 Nov 2020 11:27:58 +0100 (CET)
+DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=mymailcheap.com;
+ s=default; t=1605695278;
+ bh=vA5tPn4fjpXJj/OQnRg+m708mrodc5u5TJSDVOSBnHo=;
+ h=From:To:Cc:Subject:Date:From;
+ b=YYrkSpBDGdpkLi16yGwNw7yMTXXW566rTdXX2RSRxCe6FylY99qiYDmZR+PZFqCX0
+ t3yDL0nO6zMKUvJVqZaTwsroyblAKNCaLz1AfCURNqCwohtJcIkDsegRYz9slzT9Qu
+ BQkTT6dosAIQFtAVrc48QBX38eHXMYreqkbHXz5g=
+Received: from filter2.mymailcheap.com ([127.0.0.1])
+ by localhost (filter2.mymailcheap.com [127.0.0.1]) (amavisd-new, port 10024)
+ with ESMTP id eCMZCx2FVDgE; Wed, 18 Nov 2020 11:27:57 +0100 (CET)
+Received: from mail20.mymailcheap.com (mail20.mymailcheap.com [51.83.111.147])
+ (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits))
+ (No client certificate requested)
+ by filter2.mymailcheap.com (Postfix) with ESMTPS;
+ Wed, 18 Nov 2020 11:27:57 +0100 (CET)
+Received: from [213.133.102.83] (ml.mymailcheap.com [213.133.102.83])
+ by mail20.mymailcheap.com (Postfix) with ESMTP id A597A400BE;
+ Wed, 18 Nov 2020 10:27:56 +0000 (UTC)
+Authentication-Results: mail20.mymailcheap.com; dkim=pass (1024-bit key;
+ unprotected) header.d=aosc.io header.i=@aosc.io header.b="o7lHQ4SZ";
+ dkim-atps=neutral
+AI-Spam-Status: Not processed
+Received: from ice-e5v2.lan (unknown [59.41.160.51])
+ (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
+ key-exchange ECDHE (P-256) server-signature RSA-PSS (2048 bits) server-digest
+ SHA256) (No client certificate requested)
+ by mail20.mymailcheap.com (Postfix) with ESMTPSA id 3B979400BE;
+ Wed, 18 Nov 2020 10:27:45 +0000 (UTC)
+DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=aosc.io; s=default;
+ t=1605695270; bh=vA5tPn4fjpXJj/OQnRg+m708mrodc5u5TJSDVOSBnHo=;
+ h=From:To:Cc:Subject:Date:From;
+ b=o7lHQ4SZ+kcNlSGrF+USzZxRQhtIEcZFQPjvsiu+MiK+TTjArUzo5bRKHH0I4ZcDM
+ a4Ywg6IcctT99QEZGbRIHqhvjH6/Kvj4lWM77Bb0DrlHXfEdOj3LC7KiAF1vVGFfPI
+ 0oTEacf71O2OWPmQBqEH/uaV/IiGI4rZvgWiMPkk=
+From: Icenowy Zheng <icenowy@aosc.io>
+To: Jagan Teki <jagan@amarulasolutions.com>,
+ Andre Przywara <andre.przywara@arm.com>,
+ Hans de Goede <hdegoede@redhat.com>
+Cc: u-boot@lists.denx.de, linux-sunxi@googlegroups.com,
+ Icenowy Zheng <icenowy@aosc.io>
+Subject: [PATCH v3] sunxi: add PineCube board
+Date: Wed, 18 Nov 2020 18:27:17 +0800
+Message-Id: <20201118102717.635129-1-icenowy@aosc.io>
+X-Mailer: git-send-email 2.28.0
+MIME-Version: 1.0
+X-Rspamd-Queue-Id: A597A400BE
+X-Spamd-Result: default: False [4.90 / 20.00]; RCVD_VIA_SMTP_AUTH(0.00)[];
+ ARC_NA(0.00)[]; R_DKIM_ALLOW(0.00)[aosc.io:s=default];
+ RECEIVED_SPAMHAUS_PBL(0.00)[59.41.160.51:received];
+ FROM_HAS_DN(0.00)[]; TO_DN_SOME(0.00)[];
+ R_MISSING_CHARSET(2.50)[]; TO_MATCH_ENVRCPT_ALL(0.00)[];
+ MIME_GOOD(-0.10)[text/plain]; DMARC_NA(0.00)[aosc.io];
+ BROKEN_CONTENT_TYPE(1.50)[]; R_SPF_SOFTFAIL(0.00)[~all];
+ RCPT_COUNT_FIVE(0.00)[6]; ML_SERVERS(-3.10)[213.133.102.83];
+ DKIM_TRACE(0.00)[aosc.io:+]; MID_CONTAINS_FROM(1.00)[];
+ RCVD_NO_TLS_LAST(0.10)[]; FROM_EQ_ENVFROM(0.00)[];
+ MIME_TRACE(0.00)[0:+];
+ ASN(0.00)[asn:24940, ipnet:213.133.96.0/19, country:DE];
+ RCVD_COUNT_TWO(0.00)[2];
+ HFILTER_HELO_BAREIP(3.00)[213.133.102.83,1]
+X-Rspamd-Server: mail20.mymailcheap.com
+X-BeenThere: u-boot@lists.denx.de
+X-Mailman-Version: 2.1.34
+Precedence: list
+List-Id: U-Boot discussion <u-boot.lists.denx.de>
+List-Unsubscribe: <https://lists.denx.de/options/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=unsubscribe>
+List-Archive: <https://lists.denx.de/pipermail/u-boot/>
+List-Post: <mailto:u-boot@lists.denx.de>
+List-Help: <mailto:u-boot-request@lists.denx.de?subject=help>
+List-Subscribe: <https://lists.denx.de/listinfo/u-boot>,
+ <mailto:u-boot-request@lists.denx.de?subject=subscribe>
+Errors-To: u-boot-bounces@lists.denx.de
+Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
+X-Virus-Scanned: clamav-milter 0.102.3 at phobos.denx.de
+X-Virus-Status: Clean
+
+PineCube is an IP camera development kit released by Pine64.
+
+It comes with the following compoents:
+
+- A mainboard with Sochip S3 SoC, a 16MByte SPI Flash, AXP209 PMIC,
+a power-only microUSB connector, a USB Type-A connector, a 10/100Mbps
+Ethernet port and FPC connectors for camera and daughter board.
+- An OV5640-based camera module which is connected to the parallel CSI
+bus of the mainboard.
+- A daughterboard with several buttons, a SD slot, some IR LEDs, a
+microphone and a speaker connector.
+
+As the device tree is synchronized in a previous commit, just add it to
+Makefile, create a new MAINTAINER item and provide a defconfig.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+Reviewed-by: Andre Przywara <andre.przywara@arm.com>
+---
+Changes since v2:
+- Add Makefile reference to DT.
+Changes since v1:
+- Dropped LDO3 quirk.
+
+ arch/arm/dts/Makefile      |  1 +
+ board/sunxi/MAINTAINERS    |  5 +++++
+ configs/pinecube_defconfig | 15 +++++++++++++++
+ 3 files changed, 21 insertions(+)
+ create mode 100644 configs/pinecube_defconfig
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 7d1a369845..e6993733b0 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -587,6 +587,7 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \
+ 	sun8i-r40-bananapi-m2-ultra.dtb \
+ 	sun8i-v40-bananapi-m2-berry.dtb
+ dtb-$(CONFIG_MACH_SUN8I_V3S) += \
++	sun8i-s3-pinecube.dtb \
+ 	sun8i-v3s-licheepi-zero.dtb
+ dtb-$(CONFIG_MACH_SUN50I_H5) += \
+ 	sun50i-h5-bananapi-m2-plus.dtb \
+diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
+index d3755ae41a..735801ae1d 100644
+--- a/board/sunxi/MAINTAINERS
++++ b/board/sunxi/MAINTAINERS
+@@ -440,6 +440,11 @@ M:	Vasily Khoruzhick <anarsoul@gmail.com>
+ S:	Maintained
+ F:	configs/pinebook_defconfig
+ 
++PINECUBE BOARD:
++M:	Icenowy Zheng <icenowy@aosc.io>
++S:	Maintained
++F:	configs/pinecube_defconfig
++
+ PINE64 BOARDS
+ M:	Andre Przywara <andre.przywara@arm.com>
+ S:	Maintained
+diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig
+new file mode 100644
+index 0000000000..a8c404f6b1
+--- /dev/null
++++ b/configs/pinecube_defconfig
+@@ -0,0 +1,15 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_SPL=y
++CONFIG_MACH_SUN8I_V3S=y
++CONFIG_SUNXI_DRAM_DDR3_1333=y
++CONFIG_DRAM_CLK=504
++CONFIG_DRAM_ODT_EN=y
++CONFIG_I2C0_ENABLE=y
++CONFIG_DEFAULT_DEVICE_TREE="sun8i-s3-pinecube"
++CONFIG_SPL_I2C_SUPPORT=y
++# CONFIG_NETDEVICES is not set
++CONFIG_AXP209_POWER=y
++CONFIG_AXP_DCDC2_VOLT=1250
++CONFIG_AXP_DCDC3_VOLT=3300
++CONFIG_CONS_INDEX=3

u-boot-fat.patch

@@ -1,12 +0,0 @@
-diff -uNr u-boot-2012.04.01.orig/fs/fat/fat.c u-boot-2012.04.01/fs/fat/fat.c
---- u-boot-2012.04.01.orig/fs/fat/fat.c	2012-04-25 08:22:50.000000000 -0500
-+++ u-boot-2012.04.01/fs/fat/fat.c	2012-06-19 14:06:16.605337811 -0500
-@@ -90,7 +90,7 @@
- 	/* Check for FAT12/FAT16/FAT32 filesystem */
- 	if (!memcmp(buffer + DOS_FS_TYPE_OFFSET, "FAT", 3))
- 		return 0;
--	if (!memcmp(buffer + DOS_FS32_TYPE_OFFSET, "FAT32", 5))
-+	if (!memcmp(buffer + DOS_FS32_TYPE_OFFSET, "FAT", 3))
- 		return 0;
- 
- 	cur_dev = NULL;

uEnv.txt.beagle

@@ -1,5 +0,0 @@
-abcboard=omap3-beagle
-bootpart=0:3
-bootfile=boot.scr
-bootdir=/boot
-uenvcmd=ext2load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}; echo Running boot.scr script from mmc ...; source ${loadaddr} 

uEnv.txt.beagle_xm

@@ -1,5 +0,0 @@
-abcboard=omap3-beagle-xm
-bootpart=0:3
-bootfile=boot.scr
-bootdir=/boot
-uenvcmd=ext2load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}; echo Running boot.scr script from mmc ...; source ${loadaddr} 

uEnv.txt.beaglebone

@@ -1,5 +0,0 @@
-abcboard=am335x-bone
-bootpart=0:3
-bootfile=boot.scr
-bootdir=/boot
-uenvcmd=ext2load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}; echo Running boot.scr script from mmc ...; source ${loadaddr} 

uEnv.txt.panda

@@ -1,4 +0,0 @@
-abcboard=omap4-panda
-bootpart=0:3
-bootfile=boot.scr
-uenvcmd=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}; echo Running boot.scr script from mmc ...; source ${loadaddr}

uEnv.txt.panda_a4

@@ -1,4 +0,0 @@
-abcboard=omap4-panda-a4
-bootpart=0:3
-bootfile=boot.scr
-uenvcmd=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}; echo Running boot.scr script from mmc ...; source ${loadaddr}

uEnv.txt.panda_es

@@ -1,4 +0,0 @@
-abcboard=omap4-panda-es
-bootpart=0:3
-bootfile=boot.scr
-uenvcmd=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}; echo Running boot.scr script from mmc ...; source ${loadaddr}

uEnv.txt.uevm

@@ -1,4 +0,0 @@
-abcboard=omap5-evm
-bootpart=0:3
-bootfile=boot.scr
-uenvcmd=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}; echo Running boot.scr script from mmc ...; source ${loadaddr}

uboot-omap-fit.patch

@@ -1,9 +0,0 @@
---- u-boot-2012.07/include/configs/omap4_common.h.orig	2013-01-24 00:20:40.334731642 -0600
-+++ u-boot-2012.07/include/configs/omap4_common.h	2013-01-24 00:21:08.708953803 -0600
-@@ -280,4 +280,6 @@
- 
- #define CONFIG_SYS_THUMB_BUILD
- 
-+#define CONFIG_FIT
-+
- #endif /* __CONFIG_OMAP4_COMMON_H */

uboot-tools.spec

@@ -1,448 +1,349 @@
-#global candidate rc
-%global _default_patch_fuzz 2
+%global candidate rc4
 
-Name:           uboot-tools
-Version:        2013.07
-Release:        2%{?candidate:.%{candidate}}%{?dist}
-Summary:        U-Boot utilities
+Name:     uboot-tools
+Version:  2021.01
+Release:  0.4%{?candidate:.%{candidate}}%{?dist}
+Summary:  U-Boot utilities
+License:  GPLv2+ BSD LGPL-2.1+ LGPL-2.0+
+URL:      http://www.denx.de/wiki/U-Boot
 
-Group:          Development/Tools
-License:        GPLv2+
-URL:            http://www.denx.de/wiki/U-Boot
-Source0:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}%{?candidate:-%{candidate}}.tar.bz2
-Source1:        uEnv.txt.beagle
-Source2:        uEnv.txt.beaglebone
-Source3:        uEnv.txt.beagle_xm
-Source4:        uEnv.txt.panda
-Source5:        uEnv.txt.panda_a4
-Source6:        uEnv.txt.panda_es
-Source7:        uEnv.txt.uevm
-Patch1:         u-boot-fat.patch
-Patch2:         uboot-omap-fit.patch
-Patch3:         mlo-ext.patch
-Patch4:         exynos-ext.patch
+Source0:  ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}%{?candidate:-%{candidate}}.tar.bz2
+Source1:  arm-boards
+Source2:  arm-chromebooks
+Source3:  aarch64-boards
+Source4:  aarch64-chromebooks
 
-# Wandboard quad support
-Patch10: 0001-Add-wandboard-quad-support.patch
-# Beagle Bone Black support
-Patch11: 0002-am335x-mux-don-t-hang-on-unknown-EEPROMs-assume-Beag.patch
-Patch12: 0003-beaglebone-HACK-always-return-1-for-is_bone_lt.patch
-Patch13: 0004-beaglebone-HACK-raise-USB-current-limit.patch
-Patch14: 0005-beaglebone-use-kloadaddr-to-avoid-copying-the-kernel.patch
-Patch15: 0006-beaglebone-try-to-load-uEnv-uImage-from-eMMC-first.patch
-Patch16: 0007-beaglebone-Don-t-trigger-uboot-variable-lenght-limit.patch
-Patch17: 0008-beaglebone-HACK-change-mmc-order-to-avoid-u-boot-cra.patch
-Patch18: 0009-beaglebone-update-bootpart-variable-after-mmc-scan.patch
-Patch19: 0010-am335x_evm-enable-gpio-command.patch
-Patch20: 0011-am335x_evm-HACK-to-turn-on-BeagleBone-LEDs.patch
-Patch21: 0012-Fix-for-screen-rolling-when-video-played-back-in-bro.patch
-Patch22: 0013-beaglebone-enable-CONFIG_SUPPORT_RAW_INITRD-option.patch
-Patch23: 0014-mmc-Add-RSTN-enable-for-emmc.patch
-Patch24: 0015-wandboard-add-pxe-support-set-default-boot-command-l.patch
+# Fedoraisms patches
+# Needed to find DT on boot partition that's not the first partition
+Patch1:   uefi-distro-load-FDT-from-any-partition-on-boot-device.patch
+# Needed due to issues with shim
+Patch2:   uefi-use-Fedora-specific-path-name.patch
+# RPi - uses RPI firmware device tree for HAT support
+Patch3:   rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch
+# Ajust the U-Boot offsets in SPL to take less space
+#Patch4:   rockchip-spl-u-boot-itb-offset.patch
 
-# Panda ES memory timing issue
-Patch25: omap4-panda-memtiming.patch
+# Board fixes and enablement
+Patch5:   Raspberry-Pi-400-Compute-Module-4-support.patch
+Patch6:   rng-Add-iProc-RNG200-driver.patch
+# AllWinner improvements
+Patch10:  AllWinner-PineTab.patch
+Patch11:  sunxi-add-PineCube-board.patch
+Patch12:  0001-Fixes-for-AllWinner-ethernet-network-interfaces.patch
+# TI fixes
+Patch13:  0001-Fix-BeagleAI-detection.patch
+# Rockchips improvements
+Patch14:  arm-rk3399-enable-rng-on-rock960-and-firefly3399.patch
+Patch15:  rk3399-Pinebook-pro-EDP-support.patch
 
-
-Requires:       dtc
-
-# build the tool for manipulation with environment only on arm
-%ifarch %{arm}
-%global with_env 1
+BuildRequires:  bc
+BuildRequires:  dtc
+BuildRequires:  make
+# Requirements for building on el7
+%if 0%{?rhel} == 7
+BuildRequires:  devtoolset-7-build
+BuildRequires:  devtoolset-7-binutils
+BuildRequires:  devtoolset-7-gcc
+BuildRequires:  python2-devel
+BuildRequires:  python2-setuptools
+BuildRequires:  python2-libfdt
+%else
+BuildRequires:  gcc
+BuildRequires:  python3-devel
+BuildRequires:  python3-setuptools
+BuildRequires:  python3-libfdt
 %endif
+BuildRequires:  flex bison
+BuildRequires:  openssl-devel
+BuildRequires:  SDL-devel
+BuildRequires:  swig
+%ifarch %{arm} aarch64
+BuildRequires:  vboot-utils
+%endif
+%ifarch aarch64
+BuildRequires:  arm-trusted-firmware-armv8
+%endif
+Requires:       dtc
 
 %description
 This package contains a few U-Boot utilities - mkimage for creating boot images
 and fw_printenv/fw_setenv for manipulating the boot environment variables.
 
-%ifarch %{arm}
-%package     -n uboot-beagle
-Summary:     u-boot bootloader binaries for beagleboard
-Requires:    uboot-tools
-
-%description -n uboot-beagle
-u-boot bootloader binaries for beagleboard
-
-%package     -n uboot-beaglebone
-Summary:     u-boot bootloader binaries for beaglebone
-Requires:    uboot-tools
-
-%description -n uboot-beaglebone
-u-boot bootloader binaries for beaglebone
-
-%package     -n uboot-highbank
-Summary:     u-boot bootloader binaries for calxeda highbank
-Requires:    uboot-tools
+%ifarch aarch64
+%package     -n uboot-images-armv8
+Summary:     U-Boot firmware images for aarch64 boards
 BuildArch:   noarch
 
-%description -n uboot-highbank
-u-boot bootloader binaries for calxeda highbank
+%description -n uboot-images-armv8
+U-Boot firmware binaries for aarch64 boards
+%endif
 
-%package     -n uboot-panda
-Summary:     u-boot bootloader binaries for pandaboard
-Requires:    uboot-tools
-
-%description -n uboot-panda
-u-boot bootloader binaries for pandaboard
-
-%package     -n uboot-origen
-Summary:     u-boot bootloader binaries for origenboard
-Requires:    uboot-tools
-
-%description -n uboot-origen
-u-boot bootloader binaries for origenboard
-
-%package     -n uboot-smdkv310
-Summary:     u-boot bootloader binaries for smdk310 board
-Requires:    uboot-tools
-
-%description -n uboot-smdkv310
-u-boot bootloader binaries for smdk310 board
-
-%package     -n uboot-uevm
-Summary:     u-boot bootloader binaries for uevm, omap5 pandaboard
-Requires:    uboot-tools
-
-%description -n uboot-uevm
-u-boot bootloader binaries for uevm, omap5 pandaboard
-
-%package     -n uboot-wandboard_dl
-Summary:     u-boot bootloader binaries for Wandboard i.MX6 Dual Lite
-Requires:    uboot-tools
-
-%description -n uboot-wandboard_dl
-u-boot bootloader binaries for Wandboard i.MX6 Dual Lite
-
-%package     -n uboot-wandboard_quad
-Summary:     u-boot bootloader binaries for Wandboard i.MX6 Quad
-Requires:    uboot-tools
-
-%description -n uboot-wandboard_quad
-u-boot bootloader binaries for Wandboard i.MX6 Quad
-
-%package     -n uboot-wandboard_solo
-Summary:     u-boot bootloader binaries for Wandboard i.MX6 Solo
-Requires:    uboot-tools
-
-%description -n uboot-wandboard_solo
-u-boot bootloader binaries for Wandboard i.MX6 Solo
+%ifarch %{arm}
+%package     -n uboot-images-armv7
+Summary:     U-Boot firmware images for armv7 boards
+BuildArch:   noarch
 
+%description -n uboot-images-armv7
+U-Boot firmware binaries for armv7 boards
 %endif
 
 %prep
-%setup -q -n u-boot-%{version}%{?candidate:-%{candidate}}
-%patch1 -p1
-%patch2 -p1
-#patch3 -p1
-#patch4 -p1
+%autosetup -p1 -n u-boot-%{version}%{?candidate:-%{candidate}}
 
-# wandboard quad support
-%patch10 -p1
-# Beagle Bone Black support
-%patch11 -p1
-%patch12 -p1
-%patch13 -p1
-%patch14 -p1
-%patch15 -p1
-%patch16 -p1
-%patch17 -p1
-%patch18 -p1
-%patch19 -p1
-%patch20 -p1
-%patch21 -p1
-%patch22 -p1
-%patch23 -p1
-%patch24 -p1
-%patch25 -p1 -b .panda
-
-mkdir builds
+cp %SOURCE1 %SOURCE2 %SOURCE3 %SOURCE4 .
 
 %build
-%ifarch %{arm}
-make CROSS_COMPILE="" am335x_evm_config
-make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE=""
-cp -p MLO builds/MLO.beaglebone
-cp -p u-boot.img builds/u-boot.img.beaglebone
-cp -p u-boot.bin builds/u-boot.bin.beaglebone
-make distclean
+mkdir builds
 
-make CROSS_COMPILE="" omap3_beagle_config
-make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE=""
-cp -p MLO builds/MLO.beagle
-cp -p u-boot.img builds/u-boot.img.beagle
-cp -p u-boot.bin builds/u-boot.bin.beagle
-make distclean
+%if 0%{?rhel} == 7
+#Enabling DTS for .el7
+%{?enable_devtoolset7:%{enable_devtoolset7}}
+%endif
 
-make CROSS_COMPILE="" highbank_config
-make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE=""
-cp -p u-boot.bin builds/u-boot.bin.highbank
-make distclean
-
-make CROSS_COMPILE="" omap4_panda_config
-make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE=""
-cp -p MLO builds/MLO.panda
-cp -p u-boot.img builds/u-boot.img.panda
-cp -p u-boot.bin builds/u-boot.bin.panda
-make distclean
-
-make CROSS_COMPILE="" origen_config
-make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE=""
-cp -p spl/origen-spl.bin builds/origen-spl.bin.origen
-cp -p u-boot.bin builds/u-boot.bin.origen
-make distclean
-
-make CROSS_COMPILE="" smdkv310_config
-make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE=""
-cp -p spl/smdkv310-spl.bin builds/smdkv310-spl.bin.smdkv310
-cp -p u-boot.bin builds/u-boot.bin.smdkv310
-make distclean
-
-make CROSS_COMPILE="" wandboard_dl_config
-make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE=""
-cp -p u-boot.imx builds/u-boot.imx.dl
-make distclean
-
-make CROSS_COMPILE="" wandboard_quad_config
-make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE=""
-cp -p u-boot.imx builds/u-boot.imx.quad
-make distclean
-
-make CROSS_COMPILE="" wandboard_solo_config
-make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE=""
-cp -p u-boot.imx builds/u-boot.imx.solo
-make distclean
-
-make CROSS_COMPILE="" omap5_uevm_config
-make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE=""
-cp -p MLO builds/MLO.uevm
-cp -p u-boot.img builds/u-boot.img.uevm
-cp -p u-boot.bin builds/u-boot.bin.uevm
-make distclean
+%ifarch aarch64 %{arm}
+for board in $(cat %{_arch}-boards)
+do
+  echo "Building board: $board"
+  mkdir builds/$(echo $board)/
+  # ATF selection, needs improving, suggestions of ATF SoC to Board matrix welcome
+  sun50i=(a64-olinuxino amarula_a64_relic bananapi_m2_plus_h5 bananapi_m64 libretech_all_h3_cc_h5 nanopi_a64 nanopi_neo2 nanopi_neo_plus2 orangepi_pc2 orangepi_prime orangepi_win orangepi_zero_plus orangepi_zero_plus2 pine64-lts pine64_plus pinebook pinephone pinetab sopine_baseboard teres_i)
+  if [[ " ${sun50i[*]} " == *" $board "* ]]; then
+    echo "Board: $board using sun50i_a64"
+    cp /usr/share/arm-trusted-firmware/sun50i_a64/* builds/$(echo $board)/
+  fi
+  sun50h6=(orangepi_lite2 orangepi_one_plus pine_h64)
+  if [[ " ${sun50h6[*]} " == *" $board "* ]]; then
+    echo "Board: $board using sun50i_h6"
+    cp /usr/share/arm-trusted-firmware/sun50i_h6/* builds/$(echo $board)/
+  fi
+  rk3328=(evb-rk3328 rock64-rk3328 rock-pi-e-rk3328 roc-cc-rk3328)
+  if [[ " ${rk3328[*]} " == *" $board "* ]]; then
+    echo "Board: $board using rk3328"
+    cp /usr/share/arm-trusted-firmware/rk3328/* builds/$(echo $board)/
+  fi
+  rk3399=(evb-rk3399 ficus-rk3399 firefly-rk3399 khadas-edge-captain-rk3399 khadas-edge-rk3399 khadas-edge-v-rk3399 nanopc-t4-rk3399 nanopi-m4-2gb-rk3399 nanopi-m4-rk3399 nanopi-neo4-rk3399 orangepi-rk3399 pinebook-pro-rk3399 puma-rk3399 rock960-rk3399 rock-pi-4c-rk3399 rock-pi-4-rk3399 rock-pi-n10-rk3399pro rockpro64-rk3399 roc-pc-mezzanine-rk3399 roc-pc-rk3399)
+  if [[ " ${rk3399[*]} " == *" $board "* ]]; then
+    echo "Board: $board using rk3399"
+    cp /usr/share/arm-trusted-firmware/rk3399/* builds/$(echo $board)/
+  fi
+  # End ATF
+  make $(echo $board)_defconfig O=builds/$(echo $board)/
+  %make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" O=builds/$(echo $board)/
+done
 
 %endif
 
-make tools HOSTCC="gcc $RPM_OPT_FLAGS" HOSTSTRIP=/bin/true CROSS_COMPILE=""
-
-%if 0%{?with_env}
-make CROSS_COMPILE="" sheevaplug_config
-make env HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE=""
-%endif
+%make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" tools-only_defconfig O=builds/
+%make_build HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" tools-all O=builds/
 
 %install
-rm -rf $RPM_BUILD_ROOT
-
 mkdir -p $RPM_BUILD_ROOT%{_bindir}
 mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}
 mkdir -p $RPM_BUILD_ROOT%{_mandir}/man1
-%ifarch %{arm}
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot-panda/
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot-beagle/
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot-beaglebone/
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot-highbank/
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot-origen/
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot-smdkv310/
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot-imx6dl/
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot-imx6quad/
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot-imx6solo/
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot-uevm/
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot-vexpress/
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/
 
-for board in beaglebone beagle panda uevm
+%ifarch aarch64
+for board in $(cat %{_arch}-boards)
 do
-install -p -m 0644 builds/u-boot.bin.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot-$(echo $board)/u-boot.bin
-install -p -m 0644 builds/u-boot.img.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot-$(echo $board)/u-boot.img
-install -p -m 0644 builds/MLO.$(echo $board) $RPM_BUILD_ROOT%{_datadir}/uboot-$(echo $board)/MLO
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
+ for file in u-boot.bin u-boot.dtb u-boot.img u-boot-dtb.img u-boot.itb u-boot-sunxi-with-spl.bin u-boot-rockchip.bin idbloader.img spl/boot.bin spl/sunxi-spl.bin
+ do
+  if [ -f builds/$(echo $board)/$(echo $file) ]; then
+    install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
+  fi
+ done
 done
-
-install -p -m 0644 builds/u-boot.bin.highbank $RPM_BUILD_ROOT%{_datadir}/uboot-highbank/u-boot.bin
-
-install -p -m 0644 builds/origen-spl.bin.origen $RPM_BUILD_ROOT%{_datadir}/uboot-origen/origen-spl.bin
-install -p -m 0644 builds/u-boot.bin.origen $RPM_BUILD_ROOT%{_datadir}/uboot-origen/u-boot.bin
-
-install -p -m 0644 builds/smdkv310-spl.bin.smdkv310 $RPM_BUILD_ROOT%{_datadir}/uboot-smdkv310/smdkv310-spl.bin
-install -p -m 0644 builds/u-boot.bin.smdkv310 $RPM_BUILD_ROOT%{_datadir}/uboot-smdkv310/u-boot.bin
-
-install -p -m 0644 builds/u-boot.imx.dl $RPM_BUILD_ROOT%{_datadir}/uboot-imx6dl/u-boot.imx
-install -p -m 0644 builds/u-boot.imx.quad $RPM_BUILD_ROOT%{_datadir}/uboot-imx6quad/u-boot.imx
-install -p -m 0644 builds/u-boot.imx.solo $RPM_BUILD_ROOT%{_datadir}/uboot-imx6solo/u-boot.imx
-
-
-install -p -m 0644 %{SOURCE1}  $RPM_BUILD_ROOT%{_datadir}/uboot-beagle/uEnv.txt.beagle
-install -p -m 0644 %{SOURCE2}  $RPM_BUILD_ROOT%{_datadir}/uboot-beaglebone/uEnv.txt.beaglebone
-install -p -m 0644 %{SOURCE3}  $RPM_BUILD_ROOT%{_datadir}/uboot-beagle/uEnv.txt.beagle_xm
-install -p -m 0644 %{SOURCE4}  $RPM_BUILD_ROOT%{_datadir}/uboot-panda/uEnv.txt.panda
-install -p -m 0644 %{SOURCE5}  $RPM_BUILD_ROOT%{_datadir}/uboot-panda/uEnv.txt.panda_a4
-install -p -m 0644 %{SOURCE6}  $RPM_BUILD_ROOT%{_datadir}/uboot-panda/uEnv.txt.panda_es
-install -p -m 0644 %{SOURCE7}  $RPM_BUILD_ROOT%{_datadir}/uboot-uevm/uEnv.txt.uevm
-
 %endif
 
-install -p -m 0755 tools/mkimage $RPM_BUILD_ROOT%{_bindir}
+%ifarch %{arm}
+for board in $(cat %{_arch}-boards)
+do
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
+ for file in MLO SPL spl/arndale-spl.bin spl/origen-spl.bin spl/*spl.bin u-boot.bin u-boot.dtb u-boot-dtb-tegra.bin u-boot.img u-boot.imx u-boot-spl.kwb u-boot-rockchip.bin u-boot-sunxi-with-spl.bin spl/boot.bin
+ do
+  if [ -f builds/$(echo $board)/$(echo $file) ]; then
+    install -p -m 0644 builds/$(echo $board)/$(echo $file) $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/
+  fi
+ done
+
+done
+
+# Bit of a hack to remove binaries we don't use as they're large
+for board in $(cat %{_arch}-boards)
+do
+  if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot-sunxi-with-spl.bin ]; then
+    rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.*
+  fi
+  if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/MLO ]; then
+    rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.bin
+  fi
+  if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/SPL ]; then
+    rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.bin
+  fi
+  if [ -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.imx ]; then
+    rm -f $RPM_BUILD_ROOT%{_datadir}/uboot/$(echo $board)/u-boot.bin
+  fi
+done
+%endif
+
+for tool in bmp_logo dumpimage env/fw_printenv fit_check_sign fit_info gdb/gdbcont gdb/gdbsend gen_eth_addr gen_ethaddr_crc img2srec mkenvimage mkimage mksunxiboot ncb proftool sunxi-spl-image-builder ubsha1 xway-swap-bytes
+do
+install -p -m 0755 builds/tools/$tool $RPM_BUILD_ROOT%{_bindir}
+done
 install -p -m 0644 doc/mkimage.1 $RPM_BUILD_ROOT%{_mandir}/man1
 
-%if 0%{?with_env}
-install -p -m 0755 tools/env/fw_printenv $RPM_BUILD_ROOT%{_bindir}
+install -p -m 0755 builds/tools/env/fw_printenv $RPM_BUILD_ROOT%{_bindir}
 ( cd $RPM_BUILD_ROOT%{_bindir}; ln -sf fw_printenv fw_setenv )
 
 install -p -m 0644 tools/env/fw_env.config $RPM_BUILD_ROOT%{_sysconfdir}
-%endif
 
-%clean
-rm -rf $RPM_BUILD_ROOT
+# Copy sone useful docs over
+mkdir -p builds/docs
+cp -p board/hisilicon/hikey/README builds/docs/README.hikey
+cp -p board/hisilicon/hikey/README builds/docs/README.hikey
+cp -p board/Marvell/db-88f6820-gp/README builds/docs/README.mvebu-db-88f6820
+cp -p board/rockchip/evb_rk3399/README builds/docs/README.evb_rk3399
+cp -p board/solidrun/clearfog/README builds/docs/README.clearfog
+cp -p board/solidrun/mx6cuboxi/README builds/docs/README.mx6cuboxi
+cp -p board/sunxi/README.sunxi64 builds/docs/README.sunxi64
+cp -p board/sunxi/README.nand builds/docs/README.sunxi-nand
+cp -p board/ti/am335x/README builds/docs/README.am335x
+cp -p board/ti/omap5_uevm/README builds/docs/README.omap5_uevm
+cp -p board/udoo/README builds/docs/README.udoo
+cp -p board/wandboard/README builds/docs/README.wandboard
+cp -p board/warp/README builds/docs/README.warp
+cp -p board/warp7/README builds/docs/README.warp7
 
 %files
-%defattr(-,root,root,-)
-%doc COPYING README doc/README.imximage doc/README.kwbimage doc/uImage.FIT
-%{_bindir}/mkimage
+%doc README doc/README.kwbimage doc/README.distro doc/README.gpt
+%doc doc/README.odroid doc/README.rockchip doc/uefi doc/uImage.FIT doc/arch/arm64.rst
+%doc doc/README.chromium builds/docs/*
+%doc doc/board/amlogic/ doc/board/rockchip/
+%{_bindir}/*
 %{_mandir}/man1/mkimage.1*
-%if 0%{?with_env}
-%{_bindir}/fw_printenv
-%{_bindir}/fw_setenv
+%dir %{_datadir}/uboot/
 %config(noreplace) %{_sysconfdir}/fw_env.config
+
+%ifarch aarch64
+%files -n uboot-images-armv8
+%{_datadir}/uboot/*
 %endif
+
 %ifarch %{arm}
-%files -n uboot-beaglebone
-%defattr(-,root,root,-)
-%{_datadir}/uboot-beaglebone/
-
-%files -n uboot-beagle
-%defattr(-,root,root,-)
-%{_datadir}/uboot-beagle/
-
-%files -n uboot-highbank
-%defattr(-,root,root,-)
-%{_datadir}/uboot-highbank/
-
-%files -n uboot-panda
-%defattr(-,root,root,-)
-%{_datadir}/uboot-panda/
-
-%files -n uboot-origen
-%defattr(-,root,root,-)
-%{_datadir}/uboot-origen/
-
-%files -n uboot-smdkv310
-%defattr(-,root,root,-)
-%{_datadir}/uboot-smdkv310/
-
-%files -n uboot-wandboard_dl
-%defattr(-,root,root,-)
-%{_datadir}/uboot-imx6dl/
-
-%files -n uboot-wandboard_quad
-%defattr(-,root,root,-)
-%{_datadir}/uboot-imx6quad/
-
-%files -n uboot-wandboard_solo
-%defattr(-,root,root,-)
-%{_datadir}/uboot-imx6solo/
-
-%files -n uboot-uevm
-%defattr(-,root,root,-)
-%{_datadir}/uboot-uevm/
+%files -n uboot-images-armv7
+%{_datadir}/uboot/*
 %endif
 
 %changelog
-* Sun Sep  1 2013 Peter Robinson <pbrobinson@fedoraproject.org> 2013.07-2
-- Add patch for Panda ES memory type issue
+* Sun Dec 27 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.4.rc4
+- Update to 2021.01 RC4
+- Latest RPi-400/CM4 support patch
 
-* Fri Jul 26 2013 Dennis Gilmore <dennis@ausil.us> - 2013.07-1
-- update to 2013.07 final 
+* Tue Dec 15 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.3.rc3
+- Update to 2021.01 RC3
+- Latest RPi-400/CM4 support patch
+- Re-enable previously disabled device support
 
-* Thu Jul 18 2013 Dennis Gilmore <dennis@ausil.us> - 2013.07-0.2.rc3
-- update to 2013.07 rc3
-- set wandboard to use extlinux.conf by default
+* Mon Dec 14 2020 Javier Martinez Canillas <javierm@redhat.com> - 2021.01-0.2.rc2
+- Fix a "scan_dev_for_efi" not defined error
 
-* Thu Jul 04 2013 Dennis Gilmore <dennis@ausil.us> - 2013.07-0.1.rc2
-- update beaglebone patches 
-- update wandboard quad patch
-- upstream 2013.07-rc2 update
+* Sun Nov 22 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.1.rc2
+- Update to 2021.01 RC2
+- Latest Pinebook Pro display patches
+- Initial RPi-400 support patch
+- Update Fedora specific patches
 
-* Wed Jun 05 2013 Dennis Gilmore <dennis@ausil.us> - 2013.04-5
-- add patches to support ext filesystems in exynos and omap SPL's
-- drop bringing in arm-boot-config on arm systems
-- build a highbank u-boot (intention is to use in qemu)
-- add wandboard quad u-boot
+* Sun Nov  8 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-3
+- Fix SPI on Rockchip devices
+- Latest Pinebook Pro display patches
+- Fix Keyboard and USB-A ports on Pinebook Pro
 
-* Wed May 22 2013 Dennis Gilmore <dennis@ausil.us> - 2013.04-4
-- build vexpress image
-- add uEnv.txt files for various supported omap systems
+* Wed Oct 28 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-2
+- Fix kernel installs for non EBBR systems
+- Fix for wired networks on some Allwinner devices
 
-* Sat May 18 2013 Dennis Gilmore <dennis@ausil.us> - 2013.04-3
-- add uevm, the omap5 based pandaboard
-- Require arm-boot-config on arm arches 
+* Tue Oct 06 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-1
+- Update to 2020.10
 
-* Mon May 13 2013 Peter Robinson <pbrobinson@fedoraproject.org> 2013.04-2
-- Add patches for initial support for the Beagle Bone Black
+* Sun Sep 27 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.6.rc5
+- Initial support for display output on Pinebook Pro
 
-* Sun Apr 21 2013 Peter Robinson <pbrobinson@fedoraproject.org> 2013.04-1
-- Update to 2013.04 release
-- Build i.MX6 Wandboard Dual Lite and Solo Boards
+* Tue Sep 22 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.5.rc5
+- Update to 2020.10 RC5
 
-* Sun Mar 31 2013 Dennis Gilmore <dennis@ausil.us> - 2013.04-0.1.rc1
-- update to 2013.04-rc2
+* Wed Sep 09 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.4.rc4
+- Update to 2020.10 RC4
 
-* Fri Mar 01 2013 Dennis Gilmore <dennis@ausil.us> - 2013.01.01-1
-- update to 2013.01.01 for bug#907139
+* Wed Aug 19 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.3.rc2
+- Enable a number of new Rockchip devices
 
-* Thu Jan 24 2013 Dennis Gilmore <dennis@ausil.us> - 2013.01-1
-- update to 2013.01 release
+* Mon Aug 10 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.2.rc2
+- Update to 2020.10 RC2
 
-* Wed Oct 17 2012 Dennis Gilmore <dennis@ausil.us> - 2012.10-1
-- update to final 2012.10 release
+* Tue Jul 28 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.10-0.1.rc1
+- 2020.10 RC1
 
-* Thu Oct 11 2012 Mauro Carvalho Chehab <mchehab@redhat.com>
-- Also generate uboot for SMDK310
+* Tue Jul 14 2020 Tom Stellard <tstellar@redhat.com> - 2020.07-2
+- Use make macros
+- https://fedoraproject.org/wiki/Changes/UseMakeBuildInstallMacro
 
-* Tue Oct 09 2012 Dennis Gilmore <dennis@ausil.us> - 2012.10-0.1.rc3
-- update to 2010.10 rc3
+* Mon Jul 06 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-1
+- 2020.07 GA
 
-* Fri Aug 24 2012 Dennis Gilmore <dennis@ausil.us> - 2012.01-1
-- update to 2012.07 release
+* Tue Jun 23 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.5.rc5
+- 2020.07 RC5
 
-* Sun Jul 22 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2012.07-0.2.rc1
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
+* Thu Jun 18 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.4.rc4
+- Update various patches to latest upstream
 
-* Thu Jul 12 2012 Dennis Gilmore <dennis@ausil.us> - 2012.07-0.1.rc1
-- update to rc1 of 2012.07 release
+* Wed Jun 10 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.3.rc4
+- 2020.07 RC4
+- Minor updates and other fixes
 
-* Sat Jul 07 2012 Dennis Gilmore <dennis@ausil.us> - 2012.04.01-4
-- still build the beagleboard image
+* Tue May 12 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.2.rc2
+- 2020.07 RC2
+- Minor device updates
 
-* Sat Jul 07 2012 Dennis Gilmore <dennis@ausil.us> - 2012.04.01-3
-- build beaglebone uboot images
+* Wed Apr 29 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.07-0.1.rc1
+- 2020.07 RC1
 
-* Mon Jun 25 2012 Dennis Gilmore <dennis@ausil.us> - 2012.04.01-2
-- add patch so the MLO detects fat16 partitions correctly
+* Tue Apr 21 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-4
+- Initial support for USB on Rasperry Pi 4
 
-* Mon May 07 2012 Dennis Gilmore <dennis@ausil.us> - 2012.04.01-1
-- update to 2012.04.01 release
-- http://lists.denx.de/pipermail/u-boot/2012-April/123011.html
+* Tue Apr 21 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-3
+- Ship u-boot-rockchip.bin for SPI flash
 
-* Tue Apr 24 2012 Dennis Gilmore <dennis@ausil.us> - 2012.04-1
-- update to final 2012.04 release
+* Mon Apr 20 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-2
+- Fix ATF for new aarch64 devices
+- Fix Wandboard board detection (rhbz 1825247)
+- Fix mSD card on RockPro64
+- Enable (inital) Pinebook Pro
 
-* Thu Apr 19 2012 Dennis Gilmore <dennis@ausil.us> - 2012.04-0.1.rc3
-- update to 2012.04-rc3
-- build uboot binaries for beagle, panda and origen boards
+* Tue Apr 14 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2020.04-1
+- 2020.04
 
-* Thu Mar 08 2012 Dennis Gilmore <dennis@ausil.us> - 2011.12-1
-- update to 2011.12 release
+* Tue Apr  7 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.7-rc5
+- 2020.04 RC5
 
-* Sat Jan 14 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2011.03-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
+* Tue Mar 31 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.6-rc4
+- 2020.04 RC4
+- Updates for NVIDIA Jetson platforms
+- Support RNG for random seed for KASLR on some Rockchip devices
 
-* Thu Apr 14 2011 Dan Horák <dan[at]danny.cz> - 2011.03-1
-- updated to to 2011.03
-- build the tool for manipulation with environment only on arm
+* Thu Mar 26 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.5-rc3
+- Fix ext4 alignment issue seen on some NXP i.MX devices
 
-* Mon Feb 07 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2010.03-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
+* Wed Feb 26 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.4-rc3
+- 2020.04 RC3
 
-* Thu May 27 2010 Dan Horák <dan[at]danny.cz> 2010.03-1
-- updated to to 2010.03
-- applied review feedback - added docs and expanded description
-- pass proper CFLAGS to the compiler
+* Thu Feb 13 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.3-rc2
+- 2020.04 RC2
 
-* Sat Nov 14 2009 Dan Horák <dan[at]danny.cz> 2009.08-1
-- initial Fedora version
+* Sun Feb  2 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.2-rc1
+- Update genet NIC driver
+
+* Wed Jan 29 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.04-0.1-rc1
+- 2020.04 RC1
+
+* Tue Jan  7 2020 Peter Robinson <pbrobinson@fedoraproject.org> 2020.01-1
+- 2020.01

uefi-distro-load-FDT-from-any-partition-on-boot-device.patch

@@ -0,0 +1,82 @@
+From cc3700b5c65494547308df395fe63166ff48a1e3 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Tue, 24 Nov 2020 10:35:48 +0000
+Subject: [PATCH 1/2] distro: load FDT from any partition on boot device
+
+In the EFI_LOADER boot path, we were only checking the FAT partition
+containing the EFI payload for dtb files.  But this is somewhat of a
+fiction.  In reality there will be one small (V)FAT partition containing
+grub (or whatever the payload may be), and a second boot partition
+containing kernel/initrd/fdt (typically ext4).  It is this second
+partition where we should be looking for a FDT to load.
+
+So instead scan all the partitions of the disk containing the EFI
+payload.  This matches where grub looks for kernel/initrd (barring
+custom grub.cfg, in which case the user can use grub's 'devicetree'
+command to load the correct FDT).
+
+The other option is somehow passing the ${fdtfile} to grub so that it
+can load the FDT based on selected kernel version location (which grub
+knows) and SoC/board specific ${fdtfile} (which grub does not know).
+
+Signed-off-by: Rob Clark <robdclark@gmail.com>
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ include/config_distro_bootcmd.h | 33 +++++++++++++++++++++++----------
+ 1 file changed, 23 insertions(+), 10 deletions(-)
+
+diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
+index ff29ef5a905..769477cd80e 100644
+--- a/include/config_distro_bootcmd.h
++++ b/include/config_distro_bootcmd.h
+@@ -142,24 +142,37 @@
+ 	"load_efi_dtb="                                                   \
+ 		"load ${devtype} ${devnum}:${distro_bootpart} "           \
+ 			"${fdt_addr_r} ${prefix}${efi_fdtfile}\0"         \
++		"load ${devtype} ${devnum}:${dtb_devp} "                  \
++			"${fdt_addr_r} ${prefix}${efi_fdtfile} && "       \
++		"run boot_efi_binary\0"                                   \
+ 	\
+ 	"efi_dtb_prefixes=/ /dtb/ /dtb/current/\0"                        \
+-	"scan_dev_for_efi="                                               \
++	"scan_dev_for_dtb="                                               \
+ 		"setenv efi_fdtfile ${fdtfile}; "                         \
+ 		BOOTENV_EFI_SET_FDTFILE_FALLBACK                          \
+-		"for prefix in ${efi_dtb_prefixes}; do "                  \
+-			"if test -e ${devtype} "                          \
+-					"${devnum}:${distro_bootpart} "   \
+-					"${prefix}${efi_fdtfile}; then "  \
+-				"run load_efi_dtb; "                      \
+-			"fi;"                                             \
+-		"done;"                                                   \
+-		"run boot_efi_bootmgr;"                                   \
++		"part list ${devtype} ${devnum} dtb_devplist; "           \
++		"env exists dtb_devplist || setenv dtb_devplist "         \
++			"${distro_bootpart}; "                            \
++		"for dtb_devp in ${dtb_devplist}; do "                    \
++			"for prefix in ${efi_dtb_prefixes}; do "          \
++				"if test -e ${devtype} "                  \
++						"${devnum}:${dtb_devp} "  \
++						"${prefix}${efi_fdtfile};"\
++						" then "                  \
++					"echo Found DTB ${devtype} "      \
++						"${devnum}:${dtb_devp} "  \
++						"${prefix}${efi_fdtfile};"\
++					"run load_efi_dtb; "              \
++				"fi;"                                     \
++			"done; "                                          \
++		"done; "                                                  \
++		"run boot_efi_bootmgr\0"                                  \
++	"scan_dev_for_efi="                                               \
+ 		"if test -e ${devtype} ${devnum}:${distro_bootpart} "     \
+ 					"efi/boot/"BOOTEFI_NAME"; then "  \
+ 				"echo Found EFI removable media binary "  \
+ 					"efi/boot/"BOOTEFI_NAME"; "       \
+-				"run boot_efi_binary; "                   \
++				"run scan_dev_for_dtb; "                  \
+ 				"echo EFI LOAD FAILED: continuing...; "   \
+ 		"fi; "                                                    \
+ 		"setenv efi_fdtfile\0"
+-- 
+2.29.2
+

uefi-use-Fedora-specific-path-name.patch

@@ -0,0 +1,50 @@
+From d8fcb72d566b0ebca1613555ac13c0798817487e Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Tue, 24 Nov 2020 10:37:28 +0000
+Subject: [PATCH 2/2] use Fedora specific EFI path/name
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ include/config_distro_bootcmd.h | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
+index 769477cd80e..22ce3685758 100644
+--- a/include/config_distro_bootcmd.h
++++ b/include/config_distro_bootcmd.h
+@@ -92,9 +92,9 @@
+ 
+ #ifdef CONFIG_EFI_LOADER
+ #if defined(CONFIG_ARM64)
+-#define BOOTEFI_NAME "bootaa64.efi"
++#define BOOTEFI_NAME "grubaa64.efi"
+ #elif defined(CONFIG_ARM)
+-#define BOOTEFI_NAME "bootarm.efi"
++#define BOOTEFI_NAME "grubarm.efi"
+ #elif defined(CONFIG_X86_RUN_32BIT)
+ #define BOOTEFI_NAME "bootia32.efi"
+ #elif defined(CONFIG_X86_RUN_64BIT)
+@@ -132,7 +132,7 @@
+ 	\
+ 	"boot_efi_binary="                                                \
+ 		"load ${devtype} ${devnum}:${distro_bootpart} "           \
+-			"${kernel_addr_r} efi/boot/"BOOTEFI_NAME"; "      \
++			"${kernel_addr_r} efi/fedora/"BOOTEFI_NAME"; "      \
+ 		"if fdt addr ${fdt_addr_r}; then "                        \
+ 			"bootefi ${kernel_addr_r} ${fdt_addr_r};"         \
+ 		"else "                                                   \
+@@ -169,9 +169,9 @@
+		"run boot_efi_bootmgr\0"                                  \
+ 	"scan_dev_for_efi="                                               \
+ 		"if test -e ${devtype} ${devnum}:${distro_bootpart} "     \
+-					"efi/boot/"BOOTEFI_NAME"; then "  \
++					"efi/fedora/"BOOTEFI_NAME"; then " \
+ 				"echo Found EFI removable media binary "  \
+-					"efi/boot/"BOOTEFI_NAME"; "       \
++					"efi/fedora/"BOOTEFI_NAME"; "     \
+ 				"run scan_dev_for_dtb; "                  \
+ 				"echo EFI LOAD FAILED: continuing...; "   \
+ 		"fi; "                                                    \
+-- 
+2.29.2
+

usb-kbd-fixes.patch

@@ -0,0 +1,115 @@
+From a49845f198af088c4e5e0019edbf519344d78c97 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Tue, 4 Dec 2018 15:29:14 +0000
+Subject: [PATCH] usb kbd fixes
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ common/usb_kbd.c  | 66 +++++++++++++++++++++++++++++++++++------------
+ include/console.h |  2 --
+ 2 files changed, 50 insertions(+), 18 deletions(-)
+
+diff --git a/common/usb_kbd.c b/common/usb_kbd.c
+index 020f0d4117f..47674ce4458 100644
+--- a/common/usb_kbd.c
++++ b/common/usb_kbd.c
+@@ -518,25 +518,59 @@ static int probe_usb_keyboard(struct usb_device *dev)
+ 		return error;
+ 
+ 	stdinname = env_get("stdin");
+-#if CONFIG_IS_ENABLED(CONSOLE_MUX)
+-	error = iomux_doenv(stdin, stdinname);
+-	if (error)
+-		return error;
+-#else
+-	/* Check if this is the standard input device. */
+-	if (strcmp(stdinname, DEVNAME))
+-		return 1;
++	if (CONFIG_IS_ENABLED(CONSOLE_MUX)) {
++		char *devname = DEVNAME;
++		char *newstdin = NULL;
++		/*
++		 * stdin might not be set yet.. either way, with console-
++		 * mux the sensible thing to do is add ourselves to the
++		 * list of stdio devices:
++		 */
++		if (stdinname && !strstr(stdinname, DEVNAME)) {
++			newstdin = malloc(strlen(stdinname) +
++					strlen(","DEVNAME) + 1);
++			sprintf(newstdin, "%s,"DEVNAME, stdinname);
++			stdinname = newstdin;
++		} else if (!stdinname) {
++			stdinname = devname;
++		}
++		error = iomux_doenv(stdin, stdinname);
++		free(newstdin);
++		if (error)
++			goto unregister_stdio;
++	} else {
++		/* Check if this is the standard input device. */
++		if (strcmp(stdinname, DEVNAME)) {
++			error = -1;
++			goto unregister_stdio;
++		}
+ 
+-	/* Reassign the console */
+-	if (overwrite_console())
+-		return 1;
++		/* Reassign the console */
++		if (overwrite_console()) {
++			error = -1;
++			goto unregister_stdio;
++		}
+ 
+-	error = console_assign(stdin, DEVNAME);
+-	if (error)
+-		return error;
+-#endif
++		error = console_assign(stdin, DEVNAME);
++		if (error)
++			goto unregister_stdio;
++	}
++
++	return 0;
+ 
++unregister_stdio:
++	/*
++	 * If probe fails, the device will be removed.. leaving dangling
++	 * pointers if the stdio device is not unregistered.  If u-boot
++	 * is built without stdio_deregister(), just pretend to succeed
++	 * in order to avoid dangling pointers.
++	 */
++#if CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER)
++	stdio_deregister(DEVNAME, 1);
++	return error;
++#else
+ 	return 0;
++#endif
+ }
+ 
+ #if !CONFIG_IS_ENABLED(DM_USB)
+@@ -642,7 +676,7 @@ static int usb_kbd_remove(struct udevice *dev)
+ 
+ 	return 0;
+ err:
+-	printf("%s: warning, ret=%d", __func__, ret);
++	printf("%s: warning, ret=%d\n", __func__, ret);
+ 	return ret;
+ }
+ 
+diff --git a/include/console.h b/include/console.h
+index e935c601f12..6382ec8e0d6 100644
+--- a/include/console.h
++++ b/include/console.h
+@@ -56,8 +56,6 @@ int console_announce_r(void);
+ /*
+  * CONSOLE multiplexing.
+  */
+-#ifdef CONFIG_CONSOLE_MUX
+ #include <iomux.h>
+-#endif
+ 
+ #endif
+-- 
+2.19.2
+