2021.01 RC3, latest proposed RPi-400 patch, UEFI boot fixes

This commit is contained in:
Peter Robinson 2020-12-15 18:07:49 +00:00
parent 5fa2e9250c
commit ce18c50c5d
10 changed files with 1032 additions and 4056 deletions

File diff suppressed because it is too large Load Diff

View File

@ -1,496 +1,3 @@
From 9b10863bc8b14ca5463a95dd2c77555cfc68f326 Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Wed, 9 Sep 2020 10:59:31 +0100
Subject: [PATCH] Initial PineTab dts from linux 5.7-rc1
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun50i-a64-pinetab.dts | 460 ++++++++++++++++++++++++++++
2 files changed, 461 insertions(+)
create mode 100644 arch/arm/dts/sun50i-a64-pinetab.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 193f5c6138..57ef94450a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -611,6 +611,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \
sun50i-a64-pinephone-1.0.dtb \
sun50i-a64-pinephone-1.1.dtb \
sun50i-a64-pinephone-1.2.dtb \
+ sun50i-a64-pinetab.dtb \
sun50i-a64-sopine-baseboard.dtb \
sun50i-a64-teres-i.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
diff --git a/arch/arm/dts/sun50i-a64-pinetab.dts b/arch/arm/dts/sun50i-a64-pinetab.dts
new file mode 100644
index 0000000000..316e8a4439
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-pinetab.dts
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "PineTab";
+ compatible = "pine64,pinetab", "allwinner,sun50i-a64";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &rtl8723cs;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
+ default-brightness-level = <15>;
+ enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+ power-supply = <&vdd_bl>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ i2c-csi {
+ compatible = "i2c-gpio";
+ sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
+ scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
+ i2c-gpio,delay-us = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Rear camera */
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&csi_mclk_pin>;
+ clocks = <&ccu CLK_CSI_MCLK>;
+ clock-names = "xclk";
+
+ AVDD-supply = <&reg_dldo3>;
+ DOVDD-supply = <&reg_aldo1>;
+ DVDD-supply = <&reg_eldo3>;
+ reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
+ powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
+
+ port {
+ ov5640_ep: endpoint {
+ remote-endpoint = <&csi_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+ };
+ };
+
+ speaker_amp: audio-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ sound-name-prefix = "Speaker Amp";
+ };
+
+ vdd_bl: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "bl-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ enable-active-high;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ hpvcc-supply = <&reg_eldo1>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&csi {
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi_ep: endpoint {
+ remote-endpoint = <&ov5640_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+};
+
+&dai {
+ status = "okay";
+};
+
+&de {
+ status = "okay";
+};
+
+&dphy {
+ status = "okay";
+};
+
+&dsi {
+ vcc-dsi-supply = <&reg_dldo1>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "feixin,k101-im2ba02";
+ reg = <0>;
+ avdd-supply = <&reg_dc1sw>;
+ dvdd-supply = <&reg_dc1sw>;
+ cvdd-supply = <&reg_ldo_io1>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+ backlight = <&backlight>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ touchscreen@5d {
+ compatible = "goodix,gt9271";
+ reg = <0x5d>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+ irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+ AVDD28-supply = <&reg_ldo_io1>;
+ };
+};
+
+&i2c0_pins {
+ bias-pull-up;
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* TODO: add Bochs BMA223 accelerometer here */
+};
+
+&lradc {
+ vref-supply = <&reg_aldo3>;
+ status = "okay";
+
+ button-200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button-400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
+
+&mixer1 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&reg_dldo4>;
+ vqmmc-supply = <&reg_eldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8723cs: wifi@1 {
+ reg = <1>;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp803: pmic@3a3 {
+ compatible = "x-powers,axp803";
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ x-powers,drive-vbus-en;
+ };
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
+&reg_aldo1 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+ regulator-name = "vcc-lcd";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-hdmi-dsi-sensor";
+};
+
+&reg_dldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
+&reg_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca-1v8";
+};
+
+&reg_eldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-usb";
+ status = "okay";
+};
+
+&reg_ldo_io1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <3500000>;
+ regulator-name = "vcc-touchscreen";
+ status = "okay";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&sound {
+ status = "okay";
+ simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+ simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+ "Microphone", "Internal Microphone Right",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Internal Speaker";
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "Speaker Amp INL", "LINEOUT",
+ "Speaker Amp INR", "LINEOUT",
+ "Internal Speaker", "Speaker Amp OUTL",
+ "Internal Speaker", "Speaker Amp OUTR",
+ "Headphone Jack", "HP",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Internal Microphone Left", "MBIAS",
+ "MIC1", "Internal Microphone Left",
+ "Internal Microphone Right", "HBIAS",
+ "MIC2", "Internal Microphone Right";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <&reg_drivevbus>;
+ usb1_vbus-supply = <&reg_ldo_io0>;
+ status = "okay";
+};
--
2.26.2
From 6bf15552c2b6becb48ce7732120e0ddb2078cb1a Mon Sep 17 00:00:00 2001 From 6bf15552c2b6becb48ce7732120e0ddb2078cb1a Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com> From: Peter Robinson <pbrobinson@gmail.com>
Date: Tue, 14 Apr 2020 09:53:07 +0100 Date: Tue, 14 Apr 2020 09:53:07 +0100

File diff suppressed because it is too large Load Diff

View File

@ -43,6 +43,9 @@ orangepi_win
orangepi_zero_plus orangepi_zero_plus
orangepi_zero_plus2 orangepi_zero_plus2
p212 p212
p2371-2180
p2771-0000-500
p3450-0000
pine64-lts pine64-lts
pine64_plus pine64_plus
pinebook pinebook
@ -51,6 +54,7 @@ pinephone
pinetab pinetab
pine_h64 pine_h64
poplar poplar
puma-rk3399
rock64-rk3328 rock64-rk3328
rock960-rk3399 rock960-rk3399
rock-pi-4-rk3399 rock-pi-4-rk3399

View File

@ -56,6 +56,7 @@ inet9f_rev03
inet_q972 inet_q972
Itead_Ibox_A20 Itead_Ibox_A20
jesurun_q5 jesurun_q5
jetson-tk1
kc1 kc1
Lamobo_R1 Lamobo_R1
libretech_all_h3_cc_h2_plus libretech_all_h3_cc_h2_plus
@ -63,6 +64,7 @@ Linksprite_pcDuino
Linksprite_pcDuino3 Linksprite_pcDuino3
Linksprite_pcDuino3_Nano Linksprite_pcDuino3_Nano
liteboard liteboard
marsboard
Marsboard_A10 Marsboard_A10
Mele_A1000 Mele_A1000
Mele_A1000G_quad Mele_A1000G_quad
@ -99,6 +101,8 @@ orangepi_plus2e
orangepi_r1 orangepi_r1
orangepi_zero orangepi_zero
origen origen
paz00
pinecube
polaroid_mid2809pxe04 polaroid_mid2809pxe04
pov_protab2_ips9 pov_protab2_ips9
q8_a13_tablet q8_a13_tablet
@ -107,8 +111,10 @@ q8_a33_tablet_1024x600
q8_a33_tablet_800x480 q8_a33_tablet_800x480
qemu_arm qemu_arm
r7-tv-dongle r7-tv-dongle
riotboard
rock rock
rock-pi-n8-rk3288 rock-pi-n8-rk3288
rock2
rpi_2 rpi_2
rpi_3_32b rpi_3_32b
rpi_4_32b rpi_4_32b
@ -121,6 +127,9 @@ sunxi_Gemei_G9
tbs_a711 tbs_a711
tinker-rk3288 tinker-rk3288
tinker-s-rk3288 tinker-s-rk3288
trimslice
udoo
udoo_neo
usbarmory usbarmory
UTOO_P66 UTOO_P66
vexpress_ca15_tc2 vexpress_ca15_tc2

View File

@ -1,104 +0,0 @@
From 71f86c48580642a8d6a7d1049427bb72cb93b480 Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Sun, 8 Nov 2020 19:57:50 +0000
Subject: [PATCH] rockchip: Move Bob specific bits to it's specific u-boot.dtsi
Move the bits that are device specific to the -u-boot.dtsi as the
bits may be different on other devices and hence breaks SPI on
those devices such as the Pinebook Pro.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Fixes: c4cea2bbf995 ("rockchip: Enable building a SPI ROM image on bob")
Cc: Simon Glass <sjg@chromium.org>
---
arch/arm/dts/rk3399-gru-u-boot.dtsi | 30 +++++++++++++++++++++++++++++
arch/arm/dts/rk3399-u-boot.dtsi | 25 ------------------------
2 files changed, 30 insertions(+), 25 deletions(-)
diff --git a/arch/arm/dts/rk3399-gru-u-boot.dtsi b/arch/arm/dts/rk3399-gru-u-boot.dtsi
index 390ac2bb5a..5e95cacfea 100644
--- a/arch/arm/dts/rk3399-gru-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-gru-u-boot.dtsi
@@ -5,6 +5,36 @@
#include "rk3399-u-boot.dtsi"
+/ {
+ aliases {
+ spi1 = &spi1;
+ };
+};
+
+#ifdef CONFIG_ROCKCHIP_SPI_IMAGE
+&binman {
+ rom {
+ filename = "u-boot.rom";
+ size = <0x400000>;
+ pad-byte = <0xff>;
+
+ mkimage {
+ args = "-n rk3399 -T rkspi";
+ u-boot-spl {
+ };
+ };
+ u-boot-img {
+ offset = <0x40000>;
+ };
+ u-boot {
+ offset = <0x300000>;
+ };
+ fdtmap {
+ };
+ };
+};
+#endif
+
&spi_flash {
u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
index ecd230c720..26b0a34e64 100644
--- a/arch/arm/dts/rk3399-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-u-boot.dtsi
@@ -11,7 +11,6 @@
mmc0 = &sdhci;
mmc1 = &sdmmc;
pci0 = &pcie0;
- spi1 = &spi1;
};
cic: syscon@ff620000 {
@@ -60,30 +59,6 @@
};
-#ifdef CONFIG_ROCKCHIP_SPI_IMAGE
-&binman {
- rom {
- filename = "u-boot.rom";
- size = <0x400000>;
- pad-byte = <0xff>;
-
- mkimage {
- args = "-n rk3399 -T rkspi";
- u-boot-spl {
- };
- };
- u-boot-img {
- offset = <0x40000>;
- };
- u-boot {
- offset = <0x300000>;
- };
- fdtmap {
- };
- };
-};
-#endif
-
&cru {
u-boot,dm-pre-reloc;
};
--
2.28.0

View File

@ -1,39 +0,0 @@
From 12bc3e2c7c805f989629d1a546276491a7d28922 Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Mon, 9 Nov 2020 23:01:19 +0000
Subject: [PATCH] rockchip: Pinebook Pro: Fix USB
Improve USB config so keyboard and USB-A ports work.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
configs/pinebook-pro-rk3399_defconfig | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig
index 1ed54ad0ed..8fbd7280ac 100644
--- a/configs/pinebook-pro-rk3399_defconfig
+++ b/configs/pinebook-pro-rk3399_defconfig
@@ -55,6 +55,8 @@ CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_ETH=y
CONFIG_NVME=y
CONFIG_PCI=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
CONFIG_DM_PMIC_FAN53555=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
@@ -76,8 +78,9 @@ CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC3=y
-CONFIG_ROCKCHIP_USB2_PHY=y
+CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_RTL8152=y
--
2.28.0

View File

@ -1 +1 @@
SHA512 (u-boot-2021.01-rc2.tar.bz2) = ac21ed6ce160de377a8ea5750cd617f1c6d6e2b9508c8999fafb641e210e3bd030dcd26cea38259639c45ae0d0b9fda6d1007c547fdee002d8d946d6fb1952bb SHA512 (u-boot-2021.01-rc3.tar.bz2) = 4c88bbdeb1e39e52bb069c4bf65c9829290a51da9a21de8e60d50b62c74ae98a35d22a235fdc0a86467aedc34f85dff5d63b874af247323d0d5bdcb2e82cd4a3

View File

@ -1,8 +1,8 @@
%global candidate rc2 %global candidate rc3
Name: uboot-tools Name: uboot-tools
Version: 2021.01 Version: 2021.01
Release: 0.2%{?candidate:.%{candidate}}%{?dist} Release: 0.3%{?candidate:.%{candidate}}%{?dist}
Summary: U-Boot utilities Summary: U-Boot utilities
License: GPLv2+ BSD LGPL-2.1+ LGPL-2.0+ License: GPLv2+ BSD LGPL-2.1+ LGPL-2.0+
URL: http://www.denx.de/wiki/U-Boot URL: http://www.denx.de/wiki/U-Boot
@ -23,22 +23,19 @@ Patch2: uefi-use-Fedora-specific-path-name.patch
# Board fixes and enablement # Board fixes and enablement
# RPi - uses RPI firmware device tree for HAT support # RPi - uses RPI firmware device tree for HAT support
Patch4: rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch Patch4: rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch
Patch5: rpi-Add-identifier-for-the-new-RPi400.patch Patch5: Raspberry-Pi-400-Compute-Module-4-support.patch
# Tegra improvements # Tegra improvements
Patch6: arm-tegra-define-fdtfile-option-for-distro-boot.patch Patch6: arm-tegra-define-fdtfile-option-for-distro-boot.patch
Patch7: arm-add-BOOTENV_EFI_SET_FDTFILE_FALLBACK-for-tegra186-be.patch Patch7: arm-add-BOOTENV_EFI_SET_FDTFILE_FALLBACK-for-tegra186-be.patch
# AllWinner improvements # AllWinner improvements
Patch8: AllWinner-UpstreamSync.patch
Patch9: AllWinner-PinePhone.patch
Patch10: AllWinner-PineTab.patch Patch10: AllWinner-PineTab.patch
Patch11: 0001-Fixes-for-AllWinner-ethernet-network-interfaces.patch Patch11: 0001-Fixes-for-AllWinner-ethernet-network-interfaces.patch
Patch12: sunxi-add-PineCube-board.patch
# TI fixes # TI fixes
Patch12: 0001-Fix-BeagleAI-detection.patch Patch13: 0001-Fix-BeagleAI-detection.patch
# Rockchips improvements # Rockchips improvements
Patch13: arm-rk3399-enable-rng-on-rock960-and-firefly3399.patch #Patch14: arm-rk3399-enable-rng-on-rock960-and-firefly3399.patch
Patch14: rockchip-Move-Bob-specific-bits-to-it-s-specific-u-b.patch
Patch15: rk3399-Pinebook-pro-EDP-support.patch Patch15: rk3399-Pinebook-pro-EDP-support.patch
Patch16: rockchip-Pinebook-Pro-Fix-USB.patch
BuildRequires: bc BuildRequires: bc
BuildRequires: dtc BuildRequires: dtc
@ -239,6 +236,11 @@ cp -p board/warp7/README builds/docs/README.warp7
%endif %endif
%changelog %changelog
* Tue Dec 15 2020 Peter Robinson <pbrobinson@fedoraproject.org> - 2021.01-0.3.rc3
- Update to 2021.01 RC3
- Latest RPi-400/CM4 support patch
- Re-enable previously disabled device support
* Mon Dec 14 2020 Javier Martinez Canillas <javierm@redhat.com> - 2021.01-0.2.rc2 * Mon Dec 14 2020 Javier Martinez Canillas <javierm@redhat.com> - 2021.01-0.2.rc2
- Fix a "scan_dev_for_efi" not defined error - Fix a "scan_dev_for_efi" not defined error