diff --git a/AllWinner-Pine64-bits.patch b/AllWinner-Pine64-bits.patch index 8353921..569afc8 100644 --- a/AllWinner-Pine64-bits.patch +++ b/AllWinner-Pine64-bits.patch @@ -2170,115 +2170,3 @@ index 0000000000..5b9620f3e5 +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y -- 2.26.0 - -From ba1f187c80bcbb3181a4c6b20ab0c494bc01cf12 Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Tue, 14 Apr 2020 10:43:10 +0100 -Subject: [PATCH] Add dt-bindings/leds/common.h from linux 5.7-rc1 - -Signed-off-by: Peter Robinson ---- - include/dt-bindings/leds/common.h | 91 +++++++++++++++++++++++++++++++ - 1 file changed, 91 insertions(+) - create mode 100644 include/dt-bindings/leds/common.h - -diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h -new file mode 100644 -index 0000000000..0ce7dfc00d ---- /dev/null -+++ b/include/dt-bindings/leds/common.h -@@ -0,0 +1,91 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+/* -+ * This header provides macros for the common LEDs device tree bindings. -+ * -+ * Copyright (C) 2015, Samsung Electronics Co., Ltd. -+ * Author: Jacek Anaszewski -+ * -+ * Copyright (C) 2019 Jacek Anaszewski -+ * Copyright (C) 2020 Pavel Machek -+ */ -+ -+#ifndef __DT_BINDINGS_LEDS_H -+#define __DT_BINDINGS_LEDS_H -+ -+/* External trigger type */ -+#define LEDS_TRIG_TYPE_EDGE 0 -+#define LEDS_TRIG_TYPE_LEVEL 1 -+ -+/* Boost modes */ -+#define LEDS_BOOST_OFF 0 -+#define LEDS_BOOST_ADAPTIVE 1 -+#define LEDS_BOOST_FIXED 2 -+ -+/* Standard LED colors */ -+#define LED_COLOR_ID_WHITE 0 -+#define LED_COLOR_ID_RED 1 -+#define LED_COLOR_ID_GREEN 2 -+#define LED_COLOR_ID_BLUE 3 -+#define LED_COLOR_ID_AMBER 4 -+#define LED_COLOR_ID_VIOLET 5 -+#define LED_COLOR_ID_YELLOW 6 -+#define LED_COLOR_ID_IR 7 -+#define LED_COLOR_ID_MAX 8 -+ -+/* Standard LED functions */ -+/* Keyboard LEDs, usually it would be input4::capslock etc. */ -+/* Obsolete equivalent: "shift-key-light" */ -+#define LED_FUNCTION_CAPSLOCK "capslock" -+#define LED_FUNCTION_SCROLLLOCK "scrolllock" -+#define LED_FUNCTION_NUMLOCK "numlock" -+/* Obsolete equivalents: "tpacpi::thinklight" (IBM/Lenovo Thinkpads), -+ "lp5523:kb{1,2,3,4,5,6}" (Nokia N900) */ -+#define LED_FUNCTION_KBD_BACKLIGHT "kbd_backlight" -+ -+/* System LEDs, usually found on system body. -+ platform::mute (etc) is sometimes seen, :mute would be better */ -+#define LED_FUNCTION_POWER "power" -+#define LED_FUNCTION_DISK "disk" -+ -+/* Obsolete: "platform:*:charging" (allwinner sun50i) */ -+#define LED_FUNCTION_CHARGING "charging" -+/* Used RGB notification LEDs common on phones. -+ Obsolete equivalents: "status-led:{red,green,blue}" (Motorola Droid 4), -+ "lp5523:{r,g,b}" (Nokia N900) */ -+#define LED_FUNCTION_STATUS "status" -+ -+#define LED_FUNCTION_MICMUTE "micmute" -+#define LED_FUNCTION_MUTE "mute" -+ -+/* Miscelleaus functions. Use functions above if you can. */ -+#define LED_FUNCTION_ACTIVITY "activity" -+#define LED_FUNCTION_ALARM "alarm" -+#define LED_FUNCTION_BACKLIGHT "backlight" -+#define LED_FUNCTION_BLUETOOTH "bluetooth" -+#define LED_FUNCTION_BOOT "boot" -+#define LED_FUNCTION_CPU "cpu" -+#define LED_FUNCTION_DEBUG "debug" -+#define LED_FUNCTION_DISK_ACTIVITY "disk-activity" -+#define LED_FUNCTION_DISK_ERR "disk-err" -+#define LED_FUNCTION_DISK_READ "disk-read" -+#define LED_FUNCTION_DISK_WRITE "disk-write" -+#define LED_FUNCTION_FAULT "fault" -+#define LED_FUNCTION_FLASH "flash" -+#define LED_FUNCTION_HEARTBEAT "heartbeat" -+#define LED_FUNCTION_INDICATOR "indicator" -+#define LED_FUNCTION_LAN "lan" -+#define LED_FUNCTION_MAIL "mail" -+#define LED_FUNCTION_MTD "mtd" -+#define LED_FUNCTION_PANIC "panic" -+#define LED_FUNCTION_PROGRAMMING "programming" -+#define LED_FUNCTION_RX "rx" -+#define LED_FUNCTION_SD "sd" -+#define LED_FUNCTION_STANDBY "standby" -+#define LED_FUNCTION_TORCH "torch" -+#define LED_FUNCTION_TX "tx" -+#define LED_FUNCTION_USB "usb" -+#define LED_FUNCTION_WAN "wan" -+#define LED_FUNCTION_WLAN "wlan" -+#define LED_FUNCTION_WPS "wps" -+ -+#endif /* __DT_BINDINGS_LEDS_H */ --- -2.26.0 - diff --git a/initial-support-for-the-Pinebook-Pro-laptop-from.patch b/initial-support-for-the-Pinebook-Pro-laptop-from.patch new file mode 100644 index 0000000..47688ee --- /dev/null +++ b/initial-support-for-the-Pinebook-Pro-laptop-from.patch @@ -0,0 +1,1674 @@ +From cc06e37c2b69b7a1263dabeb39aafc1cf98560d8 Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Sun, 19 Jan 2020 03:13:02 +0000 +Subject: [PATCH 1/5] video: simple_panel: add boe,nv140fhmn49 display + +add "boe,nv140fhmn49" display to compatible node. + +Signed-off-by: Peter Robinson +Cc: Anatolij Gustschin +--- + drivers/video/simple_panel.c | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/drivers/video/simple_panel.c b/drivers/video/simple_panel.c +index c3c0e84732..5722811117 100644 +--- a/drivers/video/simple_panel.c ++++ b/drivers/video/simple_panel.c +@@ -105,6 +105,7 @@ static const struct udevice_id simple_panel_ids[] = { + { .compatible = "auo,b133xtn01" }, + { .compatible = "auo,b116xw03" }, + { .compatible = "auo,b133htn01" }, ++ { .compatible = "boe,nv140fhmn49" }, + { .compatible = "lg,lb070wv8" }, + { } + }; +-- +2.26.1 + +From a3e23dca57bff1043bd6c746458dae2dd446948e Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Sun, 19 Apr 2020 10:31:53 +0100 +Subject: [PATCH 2/5] dt-bindings: input: adopt Linux gpio-keys binding + constants + +Sync the gpio-keys input bindings from linux 5.7-rc1. + +Signed-off-by: Peter Robinson +--- + include/dt-bindings/input/gpio-keys.h | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + create mode 100644 include/dt-bindings/input/gpio-keys.h + +diff --git a/include/dt-bindings/input/gpio-keys.h b/include/dt-bindings/input/gpio-keys.h +new file mode 100644 +index 0000000000..8962df79e7 +--- /dev/null ++++ b/include/dt-bindings/input/gpio-keys.h +@@ -0,0 +1,13 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * This header provides constants for gpio keys bindings. ++ */ ++ ++#ifndef _DT_BINDINGS_GPIO_KEYS_H ++#define _DT_BINDINGS_GPIO_KEYS_H ++ ++#define EV_ACT_ANY 0x00 /* asserted or deasserted */ ++#define EV_ACT_ASSERTED 0x01 /* asserted */ ++#define EV_ACT_DEASSERTED 0x02 /* deasserted */ ++ ++#endif /* _DT_BINDINGS_GPIO_KEYS_H */ +-- +2.26.1 + +From 6c657b48a13be9b98fea18cd5a72b0d6f547a9d0 Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Sun, 19 Apr 2020 10:32:21 +0100 +Subject: [PATCH 3/5] dt-bindings: leds: adopt Linux leds common binding + constants + +Sync the common leds bindings from linux 5.7-rc1. + +Signed-off-by: Peter Robinson +--- + include/dt-bindings/leds/common.h | 91 +++++++++++++++++++++++++++++++ + 1 file changed, 91 insertions(+) + create mode 100644 include/dt-bindings/leds/common.h + +diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h +new file mode 100644 +index 0000000000..0ce7dfc00d +--- /dev/null ++++ b/include/dt-bindings/leds/common.h +@@ -0,0 +1,91 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * This header provides macros for the common LEDs device tree bindings. ++ * ++ * Copyright (C) 2015, Samsung Electronics Co., Ltd. ++ * Author: Jacek Anaszewski ++ * ++ * Copyright (C) 2019 Jacek Anaszewski ++ * Copyright (C) 2020 Pavel Machek ++ */ ++ ++#ifndef __DT_BINDINGS_LEDS_H ++#define __DT_BINDINGS_LEDS_H ++ ++/* External trigger type */ ++#define LEDS_TRIG_TYPE_EDGE 0 ++#define LEDS_TRIG_TYPE_LEVEL 1 ++ ++/* Boost modes */ ++#define LEDS_BOOST_OFF 0 ++#define LEDS_BOOST_ADAPTIVE 1 ++#define LEDS_BOOST_FIXED 2 ++ ++/* Standard LED colors */ ++#define LED_COLOR_ID_WHITE 0 ++#define LED_COLOR_ID_RED 1 ++#define LED_COLOR_ID_GREEN 2 ++#define LED_COLOR_ID_BLUE 3 ++#define LED_COLOR_ID_AMBER 4 ++#define LED_COLOR_ID_VIOLET 5 ++#define LED_COLOR_ID_YELLOW 6 ++#define LED_COLOR_ID_IR 7 ++#define LED_COLOR_ID_MAX 8 ++ ++/* Standard LED functions */ ++/* Keyboard LEDs, usually it would be input4::capslock etc. */ ++/* Obsolete equivalent: "shift-key-light" */ ++#define LED_FUNCTION_CAPSLOCK "capslock" ++#define LED_FUNCTION_SCROLLLOCK "scrolllock" ++#define LED_FUNCTION_NUMLOCK "numlock" ++/* Obsolete equivalents: "tpacpi::thinklight" (IBM/Lenovo Thinkpads), ++ "lp5523:kb{1,2,3,4,5,6}" (Nokia N900) */ ++#define LED_FUNCTION_KBD_BACKLIGHT "kbd_backlight" ++ ++/* System LEDs, usually found on system body. ++ platform::mute (etc) is sometimes seen, :mute would be better */ ++#define LED_FUNCTION_POWER "power" ++#define LED_FUNCTION_DISK "disk" ++ ++/* Obsolete: "platform:*:charging" (allwinner sun50i) */ ++#define LED_FUNCTION_CHARGING "charging" ++/* Used RGB notification LEDs common on phones. ++ Obsolete equivalents: "status-led:{red,green,blue}" (Motorola Droid 4), ++ "lp5523:{r,g,b}" (Nokia N900) */ ++#define LED_FUNCTION_STATUS "status" ++ ++#define LED_FUNCTION_MICMUTE "micmute" ++#define LED_FUNCTION_MUTE "mute" ++ ++/* Miscelleaus functions. Use functions above if you can. */ ++#define LED_FUNCTION_ACTIVITY "activity" ++#define LED_FUNCTION_ALARM "alarm" ++#define LED_FUNCTION_BACKLIGHT "backlight" ++#define LED_FUNCTION_BLUETOOTH "bluetooth" ++#define LED_FUNCTION_BOOT "boot" ++#define LED_FUNCTION_CPU "cpu" ++#define LED_FUNCTION_DEBUG "debug" ++#define LED_FUNCTION_DISK_ACTIVITY "disk-activity" ++#define LED_FUNCTION_DISK_ERR "disk-err" ++#define LED_FUNCTION_DISK_READ "disk-read" ++#define LED_FUNCTION_DISK_WRITE "disk-write" ++#define LED_FUNCTION_FAULT "fault" ++#define LED_FUNCTION_FLASH "flash" ++#define LED_FUNCTION_HEARTBEAT "heartbeat" ++#define LED_FUNCTION_INDICATOR "indicator" ++#define LED_FUNCTION_LAN "lan" ++#define LED_FUNCTION_MAIL "mail" ++#define LED_FUNCTION_MTD "mtd" ++#define LED_FUNCTION_PANIC "panic" ++#define LED_FUNCTION_PROGRAMMING "programming" ++#define LED_FUNCTION_RX "rx" ++#define LED_FUNCTION_SD "sd" ++#define LED_FUNCTION_STANDBY "standby" ++#define LED_FUNCTION_TORCH "torch" ++#define LED_FUNCTION_TX "tx" ++#define LED_FUNCTION_USB "usb" ++#define LED_FUNCTION_WAN "wan" ++#define LED_FUNCTION_WLAN "wlan" ++#define LED_FUNCTION_WPS "wps" ++ ++#endif /* __DT_BINDINGS_LEDS_H */ +-- +2.26.1 + +From 27f56eec1fa5baa4fc82ebb356a50826bb9f5643 Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Sun, 19 Apr 2020 13:28:51 +0100 +Subject: [PATCH 4/5] arm: dts: rockchip: Add initial DT for Pinebook Pro + +Sync initial support for Pinebook Pro device tree from Linux 5.7-rc1. + +Signed-off-by: Peter Robinson +--- + arch/arm/dts/Makefile | 1 + + arch/arm/dts/rk3399-pinebook-pro.dts | 1096 ++++++++++++++++++++++++++ + 2 files changed, 1097 insertions(+) + create mode 100644 arch/arm/dts/rk3399-pinebook-pro.dts + +diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile +index 820ee9733a..885bf0ef58 100644 +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -125,6 +125,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ + rk3399-nanopi-m4.dtb \ + rk3399-nanopi-neo4.dtb \ + rk3399-orangepi.dtb \ ++ rk3399-pinebook-pro.dtb \ + rk3399-puma-ddr1333.dtb \ + rk3399-puma-ddr1600.dtb \ + rk3399-puma-ddr1866.dtb \ +diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts b/arch/arm/dts/rk3399-pinebook-pro.dts +new file mode 100644 +index 0000000000..294d21bf45 +--- /dev/null ++++ b/arch/arm/dts/rk3399-pinebook-pro.dts +@@ -0,0 +1,1096 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. ++ * Copyright (c) 2018 Akash Gajjar ++ * Copyright (c) 2020 Tobias Schramm ++ */ ++ ++/dts-v1/; ++#include ++#include ++#include ++#include ++#include ++#include "rk3399.dtsi" ++#include "rk3399-opp.dtsi" ++ ++/ { ++ model = "Pine64 Pinebook Pro"; ++ compatible = "pine64,pinebook-pro", "rockchip,rk3399"; ++ ++ chosen { ++ stdout-path = "serial2:1500000n8"; ++ }; ++ ++ backlight: edp-backlight { ++ compatible = "pwm-backlight"; ++ power-supply = <&vcc_12v>; ++ pwms = <&pwm0 0 740740 0>; ++ }; ++ ++ edp_panel: edp-panel { ++ compatible = "boe,nv140fhmn49"; ++ backlight = <&backlight>; ++ enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&panel_en_gpio>; ++ power-supply = <&vcc3v3_panel>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ panel_in_edp: endpoint@0 { ++ reg = <0>; ++ remote-endpoint = <&edp_out_panel>; ++ }; ++ }; ++ }; ++ }; ++ ++ /* ++ * Use separate nodes for gpio-keys to allow for selective deactivation ++ * of wakeup sources via sysfs without disabling the whole key ++ */ ++ gpio-key-lid { ++ compatible = "gpio-keys"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&lidbtn_gpio>; ++ ++ lid { ++ debounce-interval = <20>; ++ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>; ++ label = "Lid"; ++ linux,code = ; ++ linux,input-type = ; ++ wakeup-event-action = ; ++ wakeup-source; ++ }; ++ }; ++ ++ gpio-key-power { ++ compatible = "gpio-keys"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwrbtn_gpio>; ++ ++ power { ++ debounce-interval = <20>; ++ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; ++ label = "Power"; ++ linux,code = ; ++ wakeup-source; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwrled_gpio &slpled_gpio>; ++ ++ green-led { ++ color = ; ++ default-state = "on"; ++ function = LED_FUNCTION_POWER; ++ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; ++ label = "green:power"; ++ }; ++ ++ red-led { ++ color = ; ++ default-state = "off"; ++ function = LED_FUNCTION_STANDBY; ++ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; ++ label = "red:standby"; ++ panic-indicator; ++ retain-state-suspended; ++ }; ++ }; ++ ++ /* Power sequence for SDIO WiFi module */ ++ sdio_pwrseq: sdio-pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ clocks = <&rk808 1>; ++ clock-names = "ext_clock"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&wifi_enable_h_gpio>; ++ post-power-on-delay-ms = <100>; ++ power-off-delay-us = <500000>; ++ ++ /* WL_REG_ON on module */ ++ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; ++ }; ++ ++ /* Audio components */ ++ es8316-sound { ++ compatible = "simple-audio-card"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&hp_det_gpio>; ++ simple-audio-card,name = "rockchip,es8316-codec"; ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,mclk-fs = <256>; ++ ++ simple-audio-card,widgets = ++ "Microphone", "Mic Jack", ++ "Headphone", "Headphones", ++ "Speaker", "Speaker"; ++ simple-audio-card,routing = ++ "MIC1", "Mic Jack", ++ "Headphones", "HPOL", ++ "Headphones", "HPOR", ++ "Speaker Amplifier INL", "HPOL", ++ "Speaker Amplifier INR", "HPOR", ++ "Speaker", "Speaker Amplifier OUTL", ++ "Speaker", "Speaker Amplifier OUTR"; ++ ++ simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; ++ simple-audio-card,aux-devs = <&speaker_amp>; ++ simple-audio-card,pin-switches = "Speaker"; ++ ++ simple-audio-card,cpu { ++ sound-dai = <&i2s1>; ++ }; ++ ++ simple-audio-card,codec { ++ sound-dai = <&es8316>; ++ }; ++ }; ++ ++ speaker_amp: speaker-amplifier { ++ compatible = "simple-audio-amplifier"; ++ enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; ++ sound-name-prefix = "Speaker Amplifier"; ++ VCC-supply = <&pa_5v>; ++ }; ++ ++ /* Power tree */ ++ /* Root power source */ ++ vcc_sysin: vcc-sysin { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_sysin"; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ /* Regulators supplied by vcc_sysin */ ++ /* LCD backlight supply */ ++ vcc_12v: vcc-12v { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_12v"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <12000000>; ++ regulator-max-microvolt = <12000000>; ++ vin-supply = <&vcc_sysin>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ /* Main 3.3 V supply */ ++ vcc3v3_sys: wifi_bat: vcc3v3-sys { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc_sysin>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ /* 5 V USB power supply */ ++ vcc5v0_usb: pa_5v: vcc5v0-usb-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwr_5v_gpio>; ++ regulator-name = "vcc5v0_usb"; ++ regulator-always-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc_sysin>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ /* RK3399 logic supply */ ++ vdd_log: vdd-log { ++ compatible = "pwm-regulator"; ++ pwms = <&pwm2 0 25000 1>; ++ regulator-name = "vdd_log"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <1400000>; ++ vin-supply = <&vcc_sysin>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ /* Regulators supplied by vcc3v3_sys */ ++ /* 0.9 V supply, always on */ ++ vcc_0v9: vcc-0v9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_0v9"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <900000>; ++ vin-supply = <&vcc3v3_sys>; ++ }; ++ ++ /* S3 1.8 V supply, switched by vcc1v8_s3 */ ++ vcca1v8_s3: vcc1v8-s3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcca1v8_s3"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ vin-supply = <&vcc3v3_sys>; ++ }; ++ ++ /* micro SD card power */ ++ vcc3v0_sd: vcc3v0-sd { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc0_pwr_h_gpio>; ++ regulator-name = "vcc3v0_sd"; ++ regulator-always-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ vin-supply = <&vcc3v3_sys>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ /* LCD panel power, called VCC3V3_S0 in schematic */ ++ vcc3v3_panel: vcc3v3-panel { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&lcdvcc_en_gpio>; ++ regulator-name = "vcc3v3_panel"; ++ regulator-always-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-enable-ramp-delay = <100000>; ++ vin-supply = <&vcc3v3_sys>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ /* M.2 adapter power, switched by vcc1v8_s3 */ ++ vcc3v3_ssd: vcc3v3-ssd { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3_ssd"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc3v3_sys>; ++ }; ++ ++ /* Regulators supplied by vcc5v0_usb */ ++ /* USB 3 port power supply regulator */ ++ vcc5v0_otg: vcc5v0-otg { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vcc5v0_host_en_gpio>; ++ regulator-name = "vcc5v0_otg"; ++ regulator-always-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v0_usb>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ /* Regulators supplied by vcc5v0_usb */ ++ /* Type C port power supply regulator */ ++ vbus_5vout: vbus_typec: vbus-5vout { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vcc5v0_typec0_en_gpio>; ++ regulator-name = "vbus_5vout"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v0_usb>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ /* Regulators supplied by vcc_1v8 */ ++ /* Primary 0.9 V LDO */ ++ vcca0v9_s3: vcca0v9-s3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc0v9_s3"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc_1v8>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ mains_charger: dc-charger { ++ compatible = "gpio-charger"; ++ charger-type = "mains"; ++ gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>; ++ ++ /* Also triggered by USB charger */ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&dc_det_gpio>; ++ }; ++}; ++ ++&cdn_dp { ++ status = "okay"; ++}; ++ ++&cpu_b0 { ++ cpu-supply = <&vdd_cpu_b>; ++}; ++ ++&cpu_b1 { ++ cpu-supply = <&vdd_cpu_b>; ++}; ++ ++&cpu_l0 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l1 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l2 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&cpu_l3 { ++ cpu-supply = <&vdd_cpu_l>; ++}; ++ ++&edp { ++ force-hpd; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&edp_hpd>; ++ status = "okay"; ++ ++ ports { ++ edp_out: port@1 { ++ reg = <1>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ edp_out_panel: endpoint@0 { ++ reg = <0>; ++ remote-endpoint = <&panel_in_edp>; ++ }; ++ }; ++ }; ++}; ++ ++&emmc_phy { ++ status = "okay"; ++}; ++ ++&gpu { ++ mali-supply = <&vdd_gpu>; ++ status = "okay"; ++}; ++ ++&hdmi_sound { ++ status = "okay"; ++}; ++ ++&i2c0 { ++ clock-frequency = <400000>; ++ i2c-scl-falling-time-ns = <4>; ++ i2c-scl-rising-time-ns = <168>; ++ status = "okay"; ++ ++ rk808: pmic@1b { ++ compatible = "rockchip,rk808"; ++ reg = <0x1b>; ++ #clock-cells = <1>; ++ clock-output-names = "xin32k", "rk808-clkout2"; ++ interrupt-parent = <&gpio3>; ++ interrupts = <10 IRQ_TYPE_LEVEL_LOW>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pmic_int_l_gpio>; ++ rockchip,system-power-controller; ++ wakeup-source; ++ ++ vcc1-supply = <&vcc_sysin>; ++ vcc2-supply = <&vcc_sysin>; ++ vcc3-supply = <&vcc_sysin>; ++ vcc4-supply = <&vcc_sysin>; ++ vcc6-supply = <&vcc_sysin>; ++ vcc7-supply = <&vcc_sysin>; ++ vcc8-supply = <&vcc3v3_sys>; ++ vcc9-supply = <&vcc_sysin>; ++ vcc10-supply = <&vcc_sysin>; ++ vcc11-supply = <&vcc_sysin>; ++ vcc12-supply = <&vcc3v3_sys>; ++ vcc13-supply = <&vcc_sysin>; ++ vcc14-supply = <&vcc_sysin>; ++ ++ regulators { ++ /* rk3399 center logic supply */ ++ vdd_center: DCDC_REG1 { ++ regulator-name = "vdd_center"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <750000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_cpu_l: DCDC_REG2 { ++ regulator-name = "vdd_cpu_l"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <750000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_ddr: DCDC_REG3 { ++ regulator-name = "vcc_ddr"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ vcc_1v8: vcc_wl: DCDC_REG4 { ++ regulator-name = "vcc_1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ /* not used */ ++ LDO_REG1 { ++ }; ++ ++ /* not used */ ++ LDO_REG2 { ++ }; ++ ++ vcc1v8_pmupll: LDO_REG3 { ++ regulator-name = "vcc1v8_pmupll"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcc_sdio: LDO_REG4 { ++ regulator-name = "vcc_sdio"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3000000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3000000>; ++ }; ++ }; ++ ++ vcca3v0_codec: LDO_REG5 { ++ regulator-name = "vcca3v0_codec"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_1v5: LDO_REG6 { ++ regulator-name = "vcc_1v5"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1500000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1500000>; ++ }; ++ }; ++ ++ vcca1v8_codec: LDO_REG7 { ++ regulator-name = "vcca1v8_codec"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_3v0: LDO_REG8 { ++ regulator-name = "vcc_3v0"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3000000>; ++ regulator-max-microvolt = <3000000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3000000>; ++ }; ++ }; ++ ++ vcc3v3_s3: SWITCH_REG1 { ++ regulator-name = "vcc3v3_s3"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v3_s0: SWITCH_REG2 { ++ regulator-name = "vcc3v3_s0"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ }; ++ }; ++ ++ vdd_cpu_b: regulator@40 { ++ compatible = "silergy,syr827"; ++ reg = <0x40>; ++ fcs,suspend-voltage-selector = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vsel1_gpio>; ++ regulator-name = "vdd_cpu_b"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1500000>; ++ regulator-ramp-delay = <1000>; ++ vin-supply = <&vcc_1v8>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_gpu: regulator@41 { ++ compatible = "silergy,syr828"; ++ reg = <0x41>; ++ fcs,suspend-voltage-selector = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vsel2_gpio>; ++ regulator-name = "vdd_gpu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <712500>; ++ regulator-max-microvolt = <1500000>; ++ regulator-ramp-delay = <1000>; ++ vin-supply = <&vcc_1v8>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++}; ++ ++&i2c1 { ++ clock-frequency = <100000>; ++ i2c-scl-falling-time-ns = <4>; ++ i2c-scl-rising-time-ns = <168>; ++ status = "okay"; ++ ++ es8316: es8316@11 { ++ compatible = "everest,es8316"; ++ reg = <0x11>; ++ clocks = <&cru SCLK_I2S_8CH_OUT>; ++ clock-names = "mclk"; ++ #sound-dai-cells = <0>; ++ }; ++}; ++ ++&i2c3 { ++ i2c-scl-falling-time-ns = <15>; ++ i2c-scl-rising-time-ns = <450>; ++ status = "okay"; ++}; ++ ++&i2c4 { ++ i2c-scl-falling-time-ns = <20>; ++ i2c-scl-rising-time-ns = <600>; ++ status = "okay"; ++ ++ fusb0: fusb30x@22 { ++ compatible = "fcs,fusb302"; ++ reg = <0x22>; ++ fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&fusb0_int_gpio>; ++ vbus-supply = <&vbus_typec>; ++ ++ connector { ++ compatible = "usb-c-connector"; ++ data-role = "host"; ++ label = "USB-C"; ++ op-sink-microwatt = <1000000>; ++ power-role = "dual"; ++ sink-pdos = ++ ; ++ source-pdos = ++ ; ++ try-power-role = "sink"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ ++ usbc_hs: endpoint { ++ remote-endpoint = ++ <&u2phy0_typec_hs>; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ ++ usbc_ss: endpoint { ++ remote-endpoint = ++ <&tcphy0_typec_ss>; ++ }; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ ++ usbc_dp: endpoint { ++ remote-endpoint = ++ <&tcphy0_typec_dp>; ++ }; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&i2s1 { ++ #sound-dai-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>; ++ rockchip,capture-channels = <8>; ++ rockchip,playback-channels = <8>; ++ status = "okay"; ++}; ++ ++&io_domains { ++ audio-supply = <&vcc_3v0>; ++ gpio1830-supply = <&vcc_3v0>; ++ sdmmc-supply = <&vcc_sdio>; ++ status = "okay"; ++}; ++ ++&pcie_phy { ++ status = "okay"; ++}; ++ ++&pcie0 { ++ bus-scan-delay-ms = <1000>; ++ ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; ++ max-link-speed = <2>; ++ num-lanes = <4>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie_clkreqn_cpm>; ++ vpcie0v9-supply = <&vcca0v9_s3>; ++ vpcie1v8-supply = <&vcca1v8_s3>; ++ vpcie3v3-supply = <&vcc3v3_ssd>; ++ status = "okay"; ++}; ++ ++&pinctrl { ++ buttons { ++ pwrbtn_gpio: pwrbtn-gpio { ++ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ ++ lidbtn_gpio: lidbtn-gpio { ++ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ dc-charger { ++ dc_det_gpio: dc-det-gpio { ++ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ es8316 { ++ hp_det_gpio: hp-det-gpio { ++ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ fusb302x { ++ fusb0_int_gpio: fusb0-int-gpio { ++ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ i2s1 { ++ i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio { ++ rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>; ++ }; ++ }; ++ ++ lcd-panel { ++ lcdvcc_en_gpio: lcdvcc-en-gpio { ++ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ panel_en_gpio: panel-en-gpio { ++ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ lcd_panel_reset_gpio: lcd-panel-reset-gpio { ++ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ leds { ++ pwrled_gpio: pwrled_gpio { ++ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ slpled_gpio: slpled_gpio { ++ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ pmic { ++ pmic_int_l_gpio: pmic-int-l-gpio { ++ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ ++ vsel1_gpio: vsel1-gpio { ++ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; ++ }; ++ ++ vsel2_gpio: vsel2-gpio { ++ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; ++ }; ++ }; ++ ++ sdcard { ++ sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio { ++ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ }; ++ ++ sdio-pwrseq { ++ wifi_enable_h_gpio: wifi-enable-h-gpio { ++ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ usb-typec { ++ vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio { ++ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ usb2 { ++ pwr_5v_gpio: pwr-5v-gpio { ++ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ vcc5v0_host_en_gpio: vcc5v0-host-en-gpio { ++ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ wireless-bluetooth { ++ bt_wake_gpio: bt-wake-gpio { ++ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ bt_host_wake_gpio: bt-host-wake-gpio { ++ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ bt_reset_gpio: bt-reset-gpio { ++ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++}; ++ ++&pmu_io_domains { ++ pmu1830-supply = <&vcc_3v0>; ++ status = "okay"; ++}; ++ ++&pwm0 { ++ status = "okay"; ++}; ++ ++&pwm2 { ++ status = "okay"; ++}; ++ ++&saradc { ++ vref-supply = <&vcca1v8_s3>; ++ status = "okay"; ++}; ++ ++&sdmmc { ++ bus-width = <4>; ++ cap-mmc-highspeed; ++ cap-sd-highspeed; ++ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; ++ disable-wp; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; ++ sd-uhs-sdr104; ++ vmmc-supply = <&vcc3v0_sd>; ++ vqmmc-supply = <&vcc_sdio>; ++ status = "okay"; ++}; ++ ++&sdio0 { ++ bus-width = <4>; ++ cap-sd-highspeed; ++ cap-sdio-irq; ++ keep-power-in-suspend; ++ mmc-pwrseq = <&sdio_pwrseq>; ++ non-removable; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; ++ sd-uhs-sdr104; ++ status = "okay"; ++}; ++ ++&sdhci { ++ bus-width = <8>; ++ mmc-hs200-1_8v; ++ non-removable; ++ status = "okay"; ++}; ++ ++&spi1 { ++ max-freq = <10000000>; ++ status = "okay"; ++ ++ spiflash: flash@0 { ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ m25p,fast-read; ++ spi-max-frequency = <10000000>; ++ }; ++}; ++ ++&tcphy0 { ++ status = "okay"; ++}; ++ ++&tcphy0_dp { ++ port { ++ tcphy0_typec_dp: endpoint { ++ remote-endpoint = <&usbc_dp>; ++ }; ++ }; ++}; ++ ++&tcphy0_usb3 { ++ port { ++ tcphy0_typec_ss: endpoint { ++ remote-endpoint = <&usbc_ss>; ++ }; ++ }; ++}; ++ ++&tcphy1 { ++ status = "okay"; ++}; ++ ++&tsadc { ++ /* tshut mode 0:CRU 1:GPIO */ ++ rockchip,hw-tshut-mode = <1>; ++ /* tshut polarity 0:LOW 1:HIGH */ ++ rockchip,hw-tshut-polarity = <1>; ++ status = "okay"; ++}; ++ ++&u2phy0 { ++ status = "okay"; ++ ++ u2phy0_otg: otg-port { ++ status = "okay"; ++ }; ++ ++ u2phy0_host: host-port { ++ phy-supply = <&vcc5v0_otg>; ++ status = "okay"; ++ }; ++ ++ port { ++ u2phy0_typec_hs: endpoint { ++ remote-endpoint = <&usbc_hs>; ++ }; ++ }; ++}; ++ ++&u2phy1 { ++ status = "okay"; ++ ++ u2phy1_otg: otg-port { ++ status = "okay"; ++ }; ++ ++ u2phy1_host: host-port { ++ phy-supply = <&vcc5v0_otg>; ++ status = "okay"; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; ++ uart-has-rtscts; ++ status = "okay"; ++ ++ bluetooth { ++ compatible = "brcm,bcm4345c5"; ++ clocks = <&rk808 1>; ++ clock-names = "lpo"; ++ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; ++ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; ++ max-speed = <1500000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>; ++ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; ++ vbat-supply = <&wifi_bat>; ++ vddio-supply = <&vcc_wl>; ++ }; ++}; ++ ++&uart2 { ++ status = "okay"; ++}; ++ ++&usb_host0_ehci { ++ status = "okay"; ++}; ++ ++&usb_host0_ohci { ++ status = "okay"; ++}; ++ ++&usb_host1_ehci { ++ status = "okay"; ++}; ++ ++&usb_host1_ohci { ++ status = "okay"; ++}; ++ ++&usbdrd3_0 { ++ status = "okay"; ++}; ++ ++&usbdrd_dwc3_0 { ++ dr_mode = "host"; ++ status = "okay"; ++}; ++ ++&usbdrd3_1 { ++ status = "okay"; ++}; ++ ++&usbdrd_dwc3_1 { ++ dr_mode = "host"; ++ status = "okay"; ++}; ++ ++&vopb { ++ status = "okay"; ++}; ++ ++&vopb_mmu { ++ status = "okay"; ++}; ++ ++&vopl { ++ status = "okay"; ++}; ++ ++&vopl_mmu { ++ status = "okay"; ++}; +-- +2.26.1 + +From 699fa59c59af63692269e133590d7664335b65ed Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Mon, 20 Apr 2020 20:07:04 +0100 +Subject: [PATCH 5/5] Add initial support for the Pinebook Pro laptop from + Pine64. + +Specification: +- Rockchip RK3399 +- 4GB Dual-Channel LPDDR4 +- eMMC socket +- mSD card slot +- 128Mbit (16Mb) SPI Flash +- AP6256 for 11AC WiFi + BT5 +- 14 inch 1920*1080 eDP MiPi display +- Camera +- USB 3.0, 2.0 ports +- Type-C port with alt-mode display (DP 1.2) and 15W charge +- DC 5V/3A +- optional PCIe slot for NVMe SSD drive + +Signed-off-by: Peter Robinson +--- + arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi | 43 ++++++++++ + arch/arm/mach-rockchip/rk3399/Kconfig | 8 ++ + board/pine64/pinebook-pro-rk3399/Kconfig | 15 ++++ + board/pine64/pinebook-pro-rk3399/MAINTAINERS | 8 ++ + board/pine64/pinebook-pro-rk3399/Makefile | 1 + + .../pinebook-pro-rk3399/pinebook-pro-rk3399.c | 76 +++++++++++++++++ + configs/pinebook-pro-rk3399_defconfig | 84 +++++++++++++++++++ + include/configs/pinebook-pro-rk3399.h | 29 +++++++ + 8 files changed, 264 insertions(+) + create mode 100644 arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi + create mode 100644 board/pine64/pinebook-pro-rk3399/Kconfig + create mode 100644 board/pine64/pinebook-pro-rk3399/MAINTAINERS + create mode 100644 board/pine64/pinebook-pro-rk3399/Makefile + create mode 100644 board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c + create mode 100644 configs/pinebook-pro-rk3399_defconfig + create mode 100644 include/configs/pinebook-pro-rk3399.h + +diff --git a/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi +new file mode 100644 +index 0000000000..1a2e24d3ef +--- /dev/null ++++ b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi +@@ -0,0 +1,43 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * Copyright (C) 2019 Peter Robinson ++ */ ++ ++#include "rk3399-u-boot.dtsi" ++#include "rk3399-sdram-lpddr4-100.dtsi" ++ ++/ { ++ aliases { ++ spi0 = &spi1; ++ }; ++ ++ chosen { ++ u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc; ++ }; ++}; ++ ++&i2c0 { ++ u-boot,dm-pre-reloc; ++}; ++ ++&rk808 { ++ u-boot,dm-pre-reloc; ++}; ++ ++&sdhci { ++ max-frequency = <25000000>; ++ u-boot,dm-pre-reloc; ++}; ++ ++&sdmmc { ++ max-frequency = <20000000>; ++ u-boot,dm-pre-reloc; ++}; ++ ++&spiflash { ++ u-boot,dm-pre-reloc; ++}; ++ ++&vdd_log { ++ regulator-init-microvolt = <950000>; ++}; +diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig +index 927bb62a9f..254b9c5b4d 100644 +--- a/arch/arm/mach-rockchip/rk3399/Kconfig ++++ b/arch/arm/mach-rockchip/rk3399/Kconfig +@@ -19,6 +19,13 @@ config TARGET_EVB_RK3399 + with full function and physical connectors support like Type-C ports, + USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial... + ++config TARGET_PINEBOOK_PRO_RK3399 ++ bool "Pinebook Pro" ++ help ++ Pinebook Pro is a laptop based on the Rockchip rk3399 SoC ++ with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port, ++ 1920*1080 screen and all the usual laptop features. ++ + config TARGET_PUMA_RK3399 + bool "Theobroma Systems RK3399-Q7 (Puma)" + help +@@ -144,6 +151,7 @@ endif # BOOTCOUNT_LIMIT + + source "board/firefly/roc-pc-rk3399/Kconfig" + source "board/google/gru/Kconfig" ++source "board/pine64/pinebook-pro-rk3399/Kconfig" + source "board/pine64/rockpro64_rk3399/Kconfig" + source "board/rockchip/evb_rk3399/Kconfig" + source "board/theobroma-systems/puma_rk3399/Kconfig" +diff --git a/board/pine64/pinebook-pro-rk3399/Kconfig b/board/pine64/pinebook-pro-rk3399/Kconfig +new file mode 100644 +index 0000000000..3bb7ca448e +--- /dev/null ++++ b/board/pine64/pinebook-pro-rk3399/Kconfig +@@ -0,0 +1,15 @@ ++if TARGET_PINEBOOK_PRO_RK3399 ++ ++config SYS_BOARD ++ default "pinebook-pro-rk3399" ++ ++config SYS_VENDOR ++ default "pine64" ++ ++config SYS_CONFIG_NAME ++ default "pinebook-pro-rk3399" ++ ++config BOARD_SPECIFIC_OPTIONS ++ def_bool y ++ ++endif +diff --git a/board/pine64/pinebook-pro-rk3399/MAINTAINERS b/board/pine64/pinebook-pro-rk3399/MAINTAINERS +new file mode 100644 +index 0000000000..7153eaf2e0 +--- /dev/null ++++ b/board/pine64/pinebook-pro-rk3399/MAINTAINERS +@@ -0,0 +1,8 @@ ++PINEBOOK_PRO ++M: Peter Robinson ++S: Maintained ++F: board/pine64/rk3399-pinebook-pro/ ++F: include/configs/rk3399-pinebook-pro.h ++F: arch/arm/dts/rk3399-pinebook-pro.dts ++F: arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi ++F: configs/pinebook-pro-rk3399_defconfig +diff --git a/board/pine64/pinebook-pro-rk3399/Makefile b/board/pine64/pinebook-pro-rk3399/Makefile +new file mode 100644 +index 0000000000..2f692a12a6 +--- /dev/null ++++ b/board/pine64/pinebook-pro-rk3399/Makefile +@@ -0,0 +1 @@ ++obj-y += pinebook-pro-rk3399.o +diff --git a/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c b/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c +new file mode 100644 +index 0000000000..01421cbac2 +--- /dev/null ++++ b/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c +@@ -0,0 +1,76 @@ ++/* ++ * (C) Copyright 2016 Rockchip Electronics Co., Ltd ++ * (C) Copyright 2020 Peter Robinson ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define GRF_IO_VSEL_BT565_SHIFT 0 ++#define PMUGRF_CON0_VSEL_SHIFT 8 ++ ++#ifndef CONFIG_SPL_BUILD ++int board_early_init_f(void) ++{ ++ struct udevice *regulator; ++ int ret; ++ ++ ret = regulator_get_by_platname("vcc5v0_usb", ®ulator); ++ if (ret) { ++ debug("%s vcc5v0_usb init fail! ret %d\n", __func__, ret); ++ goto out; ++ } ++ ++ ret = regulator_set_enable(regulator, true); ++ if (ret) ++ debug("%s vcc5v0-host-en-gpio set fail! ret %d\n", __func__, ret); ++ ++out: ++ return 0; ++} ++#endif ++ ++#ifdef CONFIG_MISC_INIT_R ++static void setup_iodomain(void) ++{ ++ struct rk3399_grf_regs *grf = ++ syscon_get_first_range(ROCKCHIP_SYSCON_GRF); ++ struct rk3399_pmugrf_regs *pmugrf = ++ syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); ++ ++ /* BT565 is in 1.8v domain */ ++ rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT); ++ ++ /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */ ++ rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT); ++} ++ ++int misc_init_r(void) ++{ ++ const u32 cpuid_offset = 0x7; ++ const u32 cpuid_length = 0x10; ++ u8 cpuid[cpuid_length]; ++ int ret; ++ ++ setup_iodomain(); ++ ++ ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid); ++ if (ret) ++ return ret; ++ ++ ret = rockchip_cpuid_set(cpuid, cpuid_length); ++ if (ret) ++ return ret; ++ ++ return ret; ++} ++#endif +diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig +new file mode 100644 +index 0000000000..0e9f0ec250 +--- /dev/null ++++ b/configs/pinebook-pro-rk3399_defconfig +@@ -0,0 +1,84 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_ROCKCHIP=y ++CONFIG_SYS_TEXT_BASE=0x00200000 ++CONFIG_ENV_OFFSET=0x3F8000 ++CONFIG_ROCKCHIP_RK3399=y ++CONFIG_RAM_RK3399_LPDDR4=y ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_TARGET_PINEBOOK_PRO_RK3399=y ++CONFIG_BAUDRATE=1500000 ++CONFIG_DEBUG_UART=y ++CONFIG_DEBUG_UART_SHIFT=2 ++CONFIG_DEBUG_UART_BASE=0xFF1A0000 ++CONFIG_DEBUG_UART_CLOCK=24000000 ++CONFIG_SPL_SPI_SUPPORT=y ++CONFIG_SPL_SPI_FLASH_SUPPORT=y ++CONFIG_SPL_MTD_SUPPORT=y ++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinebook-pro.dtb" ++CONFIG_MISC_INIT_R=y ++CONFIG_DISPLAY_BOARDINFO_LATE=y ++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set ++CONFIG_SPL_STACK_R=y ++CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 ++CONFIG_TPL=y ++CONFIG_SPL_OF_CONTROL=y ++CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro" ++CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_CMD_BOOTZ=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_I2C=y ++CONFIG_CMD_MMC=y ++CONFIG_CMD_MTDPARTS=y ++CONFIG_CMD_PMIC=y ++CONFIG_CMD_REGULATOR=y ++# CONFIG_CMD_SETEXPR is not set ++CONFIG_CMD_SF=y ++CONFIG_CMD_TIME=y ++CONFIG_CMD_USB=y ++CONFIG_ROCKCHIP_GPIO=y ++CONFIG_SYS_I2C_ROCKCHIP=y ++CONFIG_BOOTDELAY=3 ++CONFIG_LED=y ++CONFIG_LED_GPIO=y ++CONFIG_MISC=y ++CONFIG_ROCKCHIP_EFUSE=y ++CONFIG_MMC_DW=y ++CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_SDMA=y ++CONFIG_MMC_SDHCI_ROCKCHIP=y ++CONFIG_ROCKCHIP_SPI=y ++CONFIG_SF_DEFAULT_SPEED=20000000 ++CONFIG_SPI_FLASH=y ++CONFIG_SPI_FLASH_GIGADEVICE=y ++CONFIG_SPI_FLASH_WINBOND=y ++CONFIG_DM_ETH=y ++CONFIG_PMIC_RK8XX=y ++CONFIG_DM_PMIC_FAN53555=y ++CONFIG_REGULATOR_PWM=y ++CONFIG_REGULATOR_RK8XX=y ++CONFIG_PWM_ROCKCHIP=y ++CONFIG_SYSRESET=y ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_DWC3=y ++# CONFIG_USB_XHCI_ROCKCHIP is not set ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_EHCI_GENERIC=y ++CONFIG_USB_DWC3=y ++CONFIG_ROCKCHIP_USB2_PHY=y ++CONFIG_USB_HOST_ETHER=y ++CONFIG_USB_ETHER_ASIX=y ++CONFIG_USB_ETHER_RTL8152=y ++CONFIG_USB_KEYBOARD=y ++CONFIG_USE_TINY_PRINTF=y ++CONFIG_SPL_TINY_MEMSET=y ++CONFIG_ERRNO_STR=y ++CONFIG_DM_VIDEO=y ++CONFIG_VIDEO_BPP16=y ++CONFIG_VIDEO_BPP32=y ++CONFIG_DISPLAY=y ++CONFIG_VIDEO_ROCKCHIP=y ++CONFIG_DISPLAY_ROCKCHIP_EDP=y +diff --git a/include/configs/pinebook-pro-rk3399.h b/include/configs/pinebook-pro-rk3399.h +new file mode 100644 +index 0000000000..423d742a79 +--- /dev/null ++++ b/include/configs/pinebook-pro-rk3399.h +@@ -0,0 +1,29 @@ ++/* ++ * Copyright (C) 2016 Rockchip Electronics Co., Ltd ++ * Copyright (C) 2020 Peter Robinson ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __PINEBOOK_PRO_RK3399_H ++#define __PINEBOOK_PRO_RK3399_H ++ ++#define ROCKCHIP_DEVICE_SETTINGS \ ++ "stdin=serial,usbkbd\0" \ ++ "stdout=serial,vidconsole\0" \ ++ "stderr=serial,vidconsole\0" ++ ++#include ++ ++#if defined(CONFIG_ENV_IS_IN_MMC) ++#define CONFIG_SYS_MMC_ENV_DEV 0 ++#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) ++#define CONFIG_ENV_SECT_SIZE (8 * 1024) ++#endif ++ ++#undef CONFIG_SYS_SPI_U_BOOT_OFFS ++#define CONFIG_SYS_SPI_U_BOOT_OFFS 1024 * 512 ++ ++#define SDRAM_BANK_SIZE (2UL << 30) ++ ++#endif +-- +2.26.1 diff --git a/rockpro64-limit-speed-on-mSD-slot.patch b/rockpro64-limit-speed-on-mSD-slot.patch new file mode 100644 index 0000000..789ea26 --- /dev/null +++ b/rockpro64-limit-speed-on-mSD-slot.patch @@ -0,0 +1,28 @@ +From 0b1a5b30d6d8ad2af9f5518b65fbbdc9e080d41d Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Mon, 20 Apr 2020 22:03:00 +0100 +Subject: [PATCH] rockpro64: limit speed on mSD slot + +Signed-off-by: Peter Robinson +--- + arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi +index deaa3efd39..e5e05f5a7f 100644 +--- a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi ++++ b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi +@@ -19,6 +19,10 @@ + status = "okay"; + }; + ++&sdmmc { ++ max-frequency = <20000000>; ++}; ++ + &vdd_center { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; +-- +2.26.1 + diff --git a/uboot-tools.spec b/uboot-tools.spec index cfeb178..e0dc83c 100644 --- a/uboot-tools.spec +++ b/uboot-tools.spec @@ -30,13 +30,15 @@ Patch7: efi_loader-enable-RNG-if-DM_RNG-is-enabled.patch Patch10: Misc-fixes-for-Tegra.patch Patch11: arm-tegra-define-fdtfile-option-for-distro-boot.patch Patch12: arm-add-BOOTENV_EFI_SET_FDTFILE_FALLBACK-for-tegra186-be.patch -# Rockchips improvements -Patch13: arm-dts-rockchip-rk3399-add-and-enable-rng-node.patch -Patch14: arm-rk3399-enable-rng-on-rock960-and-firefly3399.patch -# AllWinner improvements -Patch15: AllWinner-Pine64-bits.patch # Wandboard fixes -Patch16: wandboard-Fix-version-detection-for-mx6q-mx6dl-revD1.patch +Patch13: wandboard-Fix-version-detection-for-mx6q-mx6dl-revD1.patch +# Rockchips improvements +Patch14: arm-dts-rockchip-rk3399-add-and-enable-rng-node.patch +Patch15: arm-rk3399-enable-rng-on-rock960-and-firefly3399.patch +Patch16: initial-support-for-the-Pinebook-Pro-laptop-from.patch +Patch17: rockpro64-limit-speed-on-mSD-slot.patch +# AllWinner improvements +Patch18: AllWinner-Pine64-bits.patch BuildRequires: bc BuildRequires: dtc @@ -258,8 +260,10 @@ cp -p board/warp7/README builds/docs/README.warp7 %endif %changelog -* Sat Apr 18 2020 Peter Robinson - 2020.04-2 +* Mon Apr 20 2020 Peter Robinson - 2020.04-2 - Fix Wandboard board detection (rhbz 1825247) +- Fix mSD card on RockPro64 +- Enable (inital) Pinebook Pro * Tue Apr 14 2020 Peter Robinson - 2020.04-1 - 2020.04