diff --git a/0001-WIP-RPi-3-32-bit-port.patch b/0001-WIP-RPi-3-32-bit-port.patch new file mode 100644 index 0000000..e9c587f --- /dev/null +++ b/0001-WIP-RPi-3-32-bit-port.patch @@ -0,0 +1,587 @@ +From 202d830b11d88335652a7b25ccd023a860e4e66f Mon Sep 17 00:00:00 2001 +From: Stephen Warren +Date: Sat, 5 Mar 2016 13:15:04 -0700 +Subject: [PATCH] WIP: RPi 3 (32-bit) port + +FIXME: +- split up into n patches +- describe + +Signed-off-by: Stephen Warren +--- + arch/arm/mach-bcm283x/Kconfig | 6 ++ + arch/arm/mach-bcm283x/include/mach/aux.h | 25 +++++ + arch/arm/mach-bcm283x/include/mach/gpio.h | 2 +- + arch/arm/mach-bcm283x/include/mach/mbox.h | 2 +- + arch/arm/mach-bcm283x/include/mach/sdhci.h | 2 +- + arch/arm/mach-bcm283x/include/mach/timer.h | 2 +- + arch/arm/mach-bcm283x/include/mach/wdog.h | 2 +- + arch/arm/mach-bcm283x/phys2bus.c | 2 +- + board/raspberrypi/rpi/rpi.c | 51 +++++++++- + board/raspberrypi/rpi_3_32b/MAINTAINERS | 6 ++ + board/raspberrypi/rpi_3_32b/Makefile | 7 ++ + configs/rpi_3_32b_defconfig | 9 ++ + drivers/serial/Makefile | 1 + + drivers/serial/serial_bcm283x_mu.c | 138 +++++++++++++++++++++++++++ + include/configs/rpi-common.h | 12 ++- + include/configs/rpi.h | 1 + + include/configs/rpi_3_32b.h | 18 ++++ + include/dm/platform_data/serial_bcm283x_mu.h | 22 +++++ + 18 files changed, 297 insertions(+), 11 deletions(-) + create mode 100644 arch/arm/mach-bcm283x/include/mach/aux.h + create mode 100644 board/raspberrypi/rpi_3_32b/MAINTAINERS + create mode 100644 board/raspberrypi/rpi_3_32b/Makefile + create mode 100644 configs/rpi_3_32b_defconfig + create mode 100644 drivers/serial/serial_bcm283x_mu.c + create mode 100644 include/configs/rpi_3_32b.h + create mode 100644 include/dm/platform_data/serial_bcm283x_mu.h + +diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig +index 2315a13..aa2cf28 100644 +--- a/arch/arm/mach-bcm283x/Kconfig ++++ b/arch/arm/mach-bcm283x/Kconfig +@@ -13,11 +13,16 @@ config TARGET_RPI_2 + bool "Raspberry Pi 2" + select CPU_V7 + ++config TARGET_RPI_3_32B ++ bool "Raspberry Pi 3 32-bit build" ++ select CPU_V7 ++ + endchoice + + config SYS_BOARD + default "rpi" if TARGET_RPI + default "rpi_2" if TARGET_RPI_2 ++ default "rpi_3_32b" if TARGET_RPI_3_32B + + config SYS_VENDOR + default "raspberrypi" +@@ -28,5 +33,6 @@ config SYS_SOC + config SYS_CONFIG_NAME + default "rpi" if TARGET_RPI + default "rpi_2" if TARGET_RPI_2 ++ default "rpi_3_32b" if TARGET_RPI_3_32B + + endmenu +diff --git a/arch/arm/mach-bcm283x/include/mach/aux.h b/arch/arm/mach-bcm283x/include/mach/aux.h +new file mode 100644 +index 0000000..0f97e5c +--- /dev/null ++++ b/arch/arm/mach-bcm283x/include/mach/aux.h +@@ -0,0 +1,25 @@ ++/* ++ * (C) Copyright 2016 Stephen Warren ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef _BCM2835_AUX_H_ ++#define _BCM2835_AUX_H_ ++ ++#ifndef CONFIG_BCM2835 ++#define BCM2835_AUX_BASE 0x3f215000 ++#else ++#define BCM2835_AUX_BASE 0x20215000 ++#endif ++ ++#define BCM2835_AUX_ENABLES_SPI2 BIT(0) ++#define BCM2835_AUX_ENABLES_SPI1 BIT(0) ++#define BCM2835_AUX_ENABLES_MINI_UART BIT(0) ++ ++struct bcm2835_aux_regs { ++ u32 irq; ++ u32 enables; ++}; ++ ++#endif /* _BCM2835_AXU_H_ */ +diff --git a/arch/arm/mach-bcm283x/include/mach/gpio.h b/arch/arm/mach-bcm283x/include/mach/gpio.h +index c8ef8f5..e6e5d16 100644 +--- a/arch/arm/mach-bcm283x/include/mach/gpio.h ++++ b/arch/arm/mach-bcm283x/include/mach/gpio.h +@@ -9,7 +9,7 @@ + #ifndef _BCM2835_GPIO_H_ + #define _BCM2835_GPIO_H_ + +-#ifdef CONFIG_BCM2836 ++#ifndef CONFIG_BCM2835 + #define BCM2835_GPIO_BASE 0x3f200000 + #else + #define BCM2835_GPIO_BASE 0x20200000 +diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h +index 4a14391..627acb8 100644 +--- a/arch/arm/mach-bcm283x/include/mach/mbox.h ++++ b/arch/arm/mach-bcm283x/include/mach/mbox.h +@@ -38,7 +38,7 @@ + + /* Raw mailbox HW */ + +-#ifdef CONFIG_BCM2836 ++#ifndef CONFIG_BCM2835 + #define BCM2835_MBOX_PHYSADDR 0x3f00b880 + #else + #define BCM2835_MBOX_PHYSADDR 0x2000b880 +diff --git a/arch/arm/mach-bcm283x/include/mach/sdhci.h b/arch/arm/mach-bcm283x/include/mach/sdhci.h +index 2a21ccb..64e582c 100644 +--- a/arch/arm/mach-bcm283x/include/mach/sdhci.h ++++ b/arch/arm/mach-bcm283x/include/mach/sdhci.h +@@ -7,7 +7,7 @@ + #ifndef _BCM2835_SDHCI_H_ + #define _BCM2835_SDHCI_H_ + +-#ifdef CONFIG_BCM2836 ++#ifndef CONFIG_BCM2835 + #define BCM2835_SDHCI_BASE 0x3f300000 + #else + #define BCM2835_SDHCI_BASE 0x20300000 +diff --git a/arch/arm/mach-bcm283x/include/mach/timer.h b/arch/arm/mach-bcm283x/include/mach/timer.h +index 004c24b..2a85f23 100644 +--- a/arch/arm/mach-bcm283x/include/mach/timer.h ++++ b/arch/arm/mach-bcm283x/include/mach/timer.h +@@ -7,7 +7,7 @@ + #ifndef _BCM2835_TIMER_H + #define _BCM2835_TIMER_H + +-#ifdef CONFIG_BCM2836 ++#ifndef CONFIG_BCM2835 + #define BCM2835_TIMER_PHYSADDR 0x3f003000 + #else + #define BCM2835_TIMER_PHYSADDR 0x20003000 +diff --git a/arch/arm/mach-bcm283x/include/mach/wdog.h b/arch/arm/mach-bcm283x/include/mach/wdog.h +index cbc350e..7741d7b 100644 +--- a/arch/arm/mach-bcm283x/include/mach/wdog.h ++++ b/arch/arm/mach-bcm283x/include/mach/wdog.h +@@ -7,7 +7,7 @@ + #ifndef _BCM2835_WDOG_H + #define _BCM2835_WDOG_H + +-#ifdef CONFIG_BCM2836 ++#ifndef CONFIG_BCM2835 + #define BCM2835_WDOG_PHYSADDR 0x3f100000 + #else + #define BCM2835_WDOG_PHYSADDR 0x20100000 +diff --git a/arch/arm/mach-bcm283x/phys2bus.c b/arch/arm/mach-bcm283x/phys2bus.c +index fc1c299..8e9f492 100644 +--- a/arch/arm/mach-bcm283x/phys2bus.c ++++ b/arch/arm/mach-bcm283x/phys2bus.c +@@ -9,7 +9,7 @@ + + unsigned long phys_to_bus(unsigned long phys) + { +-#ifdef CONFIG_BCM2836 ++#ifndef CONFIG_BCM2835 + return 0xc0000000 | phys; + #else + return 0x40000000 | phys; +diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c +index 776a958..1abf0bd 100644 +--- a/board/raspberrypi/rpi/rpi.c ++++ b/board/raspberrypi/rpi/rpi.c +@@ -13,11 +13,14 @@ + #include + #include + #include ++#include + #include ++#include + #include + #include + #include + #include ++#include + + DECLARE_GLOBAL_DATA_PTR; + +@@ -30,8 +33,9 @@ U_BOOT_DEVICE(bcm2835_gpios) = { + .platdata = &gpio_platdata, + }; + ++#if defined(CONFIG_BCM2835) || defined(CONFIG_BCM2836) + static const struct pl01x_serial_platdata serial_platdata = { +-#ifdef CONFIG_BCM2836 ++#ifndef CONFIG_BCM2835 + .base = 0x3f201000, + #else + .base = 0x20201000, +@@ -43,6 +47,16 @@ U_BOOT_DEVICE(bcm2835_serials) = { + .name = "serial_pl01x", + .platdata = &serial_platdata, + }; ++#else ++static const struct bcm283x_mu_serial_platdata serial_platdata = { ++ .base = 0x3f215040, ++}; ++ ++U_BOOT_DEVICE(bcm2837_serials) = { ++ .name = "serial_bcm283x_mu", ++ .platdata = &serial_platdata, ++}; ++#endif + + struct msg_get_arm_mem { + struct bcm2835_mbox_hdr hdr; +@@ -98,7 +112,9 @@ struct rpi_model { + + static const struct rpi_model rpi_model_unknown = { + "Unknown model", +-#ifdef CONFIG_BCM2836 ++#if defined(CONFIG_BCM2837) ++ "bcm2837-rpi-other.dtb", ++#elif defined(CONFIG_BCM2836) + "bcm2836-rpi-other.dtb", + #else + "bcm2835-rpi-other.dtb", +@@ -112,6 +128,11 @@ static const struct rpi_model rpi_models_new_scheme[] = { + "bcm2836-rpi-2-b.dtb", + true, + }, ++ [0x8] = { ++ "3 Model B", ++ "bcm2837-rpi-3-b.dtb", ++ true, ++ }, + [0x9] = { + "Zero", + "bcm2835-rpi-zero.dtb", +@@ -212,6 +233,32 @@ static uint32_t rev_scheme; + static uint32_t rev_type; + static const struct rpi_model *model; + ++#ifdef CONFIG_BCM2837 ++int board_early_init_f(void) ++{ ++ struct bcm2835_gpio_regs *gpior = ++ (struct bcm2835_gpio_regs *)BCM2835_GPIO_BASE; ++ struct bcm2835_aux_regs *auxr = ++ (struct bcm2835_aux_regs *)BCM2835_AUX_BASE; ++ u32 val; ++ ++ /* Route mini UART to header UART pins */ ++ val = readl(&gpior->gpfsel[BCM2835_GPIO_FSEL_BANK(14)]); ++ val &= ~(BCM2835_GPIO_FSEL_MASK << BCM2835_GPIO_FSEL_SHIFT(14)); ++ val |= (BCM2835_GPIO_ALT5 << BCM2835_GPIO_FSEL_SHIFT(14)); ++ val &= ~(BCM2835_GPIO_FSEL_MASK << BCM2835_GPIO_FSEL_SHIFT(15)); ++ val |= (BCM2835_GPIO_ALT5 << BCM2835_GPIO_FSEL_SHIFT(15)); ++ writel(val, &gpior->gpfsel[BCM2835_GPIO_FSEL_BANK(14)]); ++ ++ /* Enable mini UART HW module */ ++ val = readl(&auxr->enables); ++ val |= BCM2835_AUX_ENABLES_MINI_UART; ++ writel(val, &auxr->enables); ++ ++ return 0; ++} ++#endif ++ + int dram_init(void) + { + ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_arm_mem, msg, 1); +diff --git a/board/raspberrypi/rpi_3_32b/MAINTAINERS b/board/raspberrypi/rpi_3_32b/MAINTAINERS +new file mode 100644 +index 0000000..bc9df87 +--- /dev/null ++++ b/board/raspberrypi/rpi_3_32b/MAINTAINERS +@@ -0,0 +1,6 @@ ++RPI_3_32B BOARD ++M: Stephen Warren ++S: Maintained ++F: board/raspberrypi/rpi_3_32b/ ++F: include/configs/rpi_3_32b.h ++F: configs/rpi_3_32b_defconfig +diff --git a/board/raspberrypi/rpi_3_32b/Makefile b/board/raspberrypi/rpi_3_32b/Makefile +new file mode 100644 +index 0000000..e569431 +--- /dev/null ++++ b/board/raspberrypi/rpi_3_32b/Makefile +@@ -0,0 +1,7 @@ ++# ++# (C) Copyright 2012,2015 Stephen Warren ++# ++# SPDX-License-Identifier: GPL-2.0 ++# ++ ++obj-y := ../rpi/rpi.o +diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig +new file mode 100644 +index 0000000..fcb8961 +--- /dev/null ++++ b/configs/rpi_3_32b_defconfig +@@ -0,0 +1,9 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_BCM283X=y ++CONFIG_TARGET_RPI_3_32B=y ++CONFIG_SYS_PROMPT="U-Boot> " ++# CONFIG_CMD_IMLS is not set ++# CONFIG_CMD_FLASH is not set ++# CONFIG_CMD_FPGA is not set ++CONFIG_CMD_GPIO=y ++CONFIG_PHYS_TO_BUS=y +diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile +index 05bdf56..ee7147a 100644 +--- a/drivers/serial/Makefile ++++ b/drivers/serial/Makefile +@@ -38,6 +38,7 @@ obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o + obj-$(CONFIG_STM32_SERIAL) += serial_stm32.o + obj-$(CONFIG_PIC32_SERIAL) += serial_pic32.o + obj-$(CONFIG_STM32X7_SERIAL) += serial_stm32x7.o ++obj-$(CONFIG_BCM283X_MU_SERIAL) += serial_bcm283x_mu.o + + ifndef CONFIG_SPL_BUILD + obj-$(CONFIG_USB_TTY) += usbtty.o +diff --git a/drivers/serial/serial_bcm283x_mu.c b/drivers/serial/serial_bcm283x_mu.c +new file mode 100644 +index 0000000..97b57cc +--- /dev/null ++++ b/drivers/serial/serial_bcm283x_mu.c +@@ -0,0 +1,138 @@ ++/* ++ * (C) Copyright 2016 Stephen Warren ++ * ++ * Derived from pl01x code: ++ * ++ * (C) Copyright 2000 ++ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. ++ * ++ * (C) Copyright 2004 ++ * ARM Ltd. ++ * Philippe Robin, ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++/* Simple U-Boot driver for the BCM283x mini UART */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++struct bcm283x_mu_regs { ++ u32 io; ++ u32 iir; ++ u32 ier; ++ u32 lcr; ++ u32 mcr; ++ u32 lsr; ++ u32 msr; ++ u32 scratch; ++ u32 cntl; ++ u32 stat; ++ u32 baud; ++}; ++ ++#define BCM283X_MU_LCR_DATA_SIZE_8 3 ++ ++#define BCM283X_MU_LSR_TX_IDLE BIT(6) ++/* This actually means not full, but is named not empty in the docs */ ++#define BCM283X_MU_LSR_TX_EMPTY BIT(5) ++#define BCM283X_MU_LSR_RX_READY BIT(0) ++ ++struct bcm283x_mu_priv { ++ struct bcm283x_mu_regs *regs; ++}; ++ ++static int bcm283x_mu_serial_setbrg(struct udevice *dev, int baudrate) ++{ ++ struct bcm283x_mu_priv *priv = dev_get_priv(dev); ++ struct bcm283x_mu_regs *regs = priv->regs; ++ /* FIXME: Get this from plat data later */ ++ u32 clock_rate = 250000000; ++ u32 divider; ++ ++ divider = clock_rate / (baudrate * 8); ++ ++ writel(BCM283X_MU_LCR_DATA_SIZE_8, ®s->lcr); ++ writel(divider - 1, ®s->baud); ++ ++ return 0; ++} ++ ++static int bcm283x_mu_serial_probe(struct udevice *dev) ++{ ++ struct bcm283x_mu_serial_platdata *plat = dev_get_platdata(dev); ++ struct bcm283x_mu_priv *priv = dev_get_priv(dev); ++ ++ priv->regs = (struct bcm283x_mu_regs *)plat->base; ++ ++ return 0; ++} ++ ++static int bcm283x_mu_serial_getc(struct udevice *dev) ++{ ++ struct bcm283x_mu_priv *priv = dev_get_priv(dev); ++ struct bcm283x_mu_regs *regs = priv->regs; ++ u32 data; ++ ++ /* Wait until there is data in the FIFO */ ++ if (!(readl(®s->lsr) & BCM283X_MU_LSR_RX_READY)) ++ return -EAGAIN; ++ ++ data = readl(®s->io); ++ ++ return (int)data; ++} ++ ++static int bcm283x_mu_serial_putc(struct udevice *dev, const char data) ++{ ++ struct bcm283x_mu_priv *priv = dev_get_priv(dev); ++ struct bcm283x_mu_regs *regs = priv->regs; ++ ++ /* Wait until there is space in the FIFO */ ++ if (!(readl(®s->lsr) & BCM283X_MU_LSR_TX_EMPTY)) ++ return -EAGAIN; ++ ++ /* Send the character */ ++ writel(data, ®s->io); ++ ++ return 0; ++} ++ ++static int bcm283x_mu_serial_pending(struct udevice *dev, bool input) ++{ ++ struct bcm283x_mu_priv *priv = dev_get_priv(dev); ++ struct bcm283x_mu_regs *regs = priv->regs; ++ unsigned int lsr = readl(®s->lsr); ++ ++ if (input) { ++ WATCHDOG_RESET(); ++ return lsr & BCM283X_MU_LSR_RX_READY; ++ } else { ++ return !(lsr & BCM283X_MU_LSR_TX_IDLE); ++ } ++} ++ ++static const struct dm_serial_ops bcm283x_mu_serial_ops = { ++ .putc = bcm283x_mu_serial_putc, ++ .pending = bcm283x_mu_serial_pending, ++ .getc = bcm283x_mu_serial_getc, ++ .setbrg = bcm283x_mu_serial_setbrg, ++}; ++ ++U_BOOT_DRIVER(serial_bcm283x_mu) = { ++ .name = "serial_bcm283x_mu", ++ .id = UCLASS_SERIAL, ++ .platdata_auto_alloc_size = sizeof(struct bcm283x_mu_serial_platdata), ++ .probe = bcm283x_mu_serial_probe, ++ .ops = &bcm283x_mu_serial_ops, ++ .flags = DM_FLAG_PRE_RELOC, ++ .priv_auto_alloc_size = sizeof(struct bcm283x_mu_priv), ++}; +diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h +index 9ae6805..30cd319 100644 +--- a/include/configs/rpi-common.h ++++ b/include/configs/rpi-common.h +@@ -11,7 +11,6 @@ + #include + + /* Architecture, CPU, etc.*/ +-#define CONFIG_BCM2835 + #define CONFIG_ARCH_CPU_INIT + + #define CONFIG_SYS_TIMER_RATE 1000000 +@@ -25,8 +24,11 @@ + * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation + * chose to use someone else's previously registered machine ID (3139, MX51_GGC) + * rather than obtaining a valid ID:-/ ++ * ++ * For the bcm2837, hopefully a machine type is not needed, since everything ++ * is DT. + */ +-#ifndef CONFIG_BCM2836 ++#ifdef CONFIG_BCM2835 + #define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 + #endif + +@@ -80,7 +82,7 @@ + #define CONFIG_CMD_USB + #ifdef CONFIG_CMD_USB + #define CONFIG_USB_DWC2 +-#ifdef CONFIG_BCM2836 ++#ifndef CONFIG_BCM2835 + #define CONFIG_USB_DWC2_REG_ADDR 0x3f980000 + #else + #define CONFIG_USB_DWC2_REG_ADDR 0x20980000 +@@ -95,7 +97,11 @@ + #endif + + /* Console UART */ ++#ifdef CONFIG_BCM2837 ++#define CONFIG_BCM283X_MU_SERIAL ++#else + #define CONFIG_PL01X_SERIAL ++#endif + #define CONFIG_CONS_INDEX 0 + #define CONFIG_BAUDRATE 115200 + +diff --git a/include/configs/rpi.h b/include/configs/rpi.h +index 86422e3..a788ce4 100644 +--- a/include/configs/rpi.h ++++ b/include/configs/rpi.h +@@ -7,6 +7,7 @@ + #ifndef __CONFIG_H + #define __CONFIG_H + ++#define CONFIG_BCM2835 + #define CONFIG_SYS_CACHELINE_SIZE 32 + + #include "rpi-common.h" +diff --git a/include/configs/rpi_3_32b.h b/include/configs/rpi_3_32b.h +new file mode 100644 +index 0000000..5343e33 +--- /dev/null ++++ b/include/configs/rpi_3_32b.h +@@ -0,0 +1,18 @@ ++/* ++ * (C) Copyright 2012,2015-2016 Stephen Warren ++ * ++ * SPDX-License-Identifier: GPL-2.0 ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_BOARD_EARLY_INIT_F ++#define CONFIG_BCM2837 ++#define CONFIG_SYS_CACHELINE_SIZE 64 ++#define CONFIG_SYS_DCACHE_OFF ++ ++#include "rpi-common.h" ++ ++#endif +diff --git a/include/dm/platform_data/serial_bcm283x_mu.h b/include/dm/platform_data/serial_bcm283x_mu.h +new file mode 100644 +index 0000000..4415945 +--- /dev/null ++++ b/include/dm/platform_data/serial_bcm283x_mu.h +@@ -0,0 +1,22 @@ ++/* ++ * (C) Copyright 2016 Stephen Warren ++ * ++ * Derived from pl01x code: ++ * Copyright (c) 2014 Google, Inc ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __serial_bcm283x_mu_h ++#define __serial_bcm283x_mu_h ++ ++/* ++ *Information about a serial port ++ * ++ * @base: Register base address ++ */ ++struct bcm283x_mu_serial_platdata { ++ unsigned long base; ++}; ++ ++#endif +-- +2.5.0 + diff --git a/armv7-boards b/armv7-boards index 1e6b860..4666a5c 100644 --- a/armv7-boards +++ b/armv7-boards @@ -57,27 +57,28 @@ novena nyan-big odroid odroid-xu3 -Orangepi -Orangepi_mini -orangepi_pc -orangepi_plus omap3_beagle +omap3_pandora omap4_panda omap5_uevm Orangepi Orangepi_mini +orangepi_pc +orangepi_plus origen +paz00 +peach-pi +peach-pit pov_protab2_ips9 q8_a13_tablet q8_a23_tablet_800x480 q8_a33_tablet_1024x600 q8_a33_tablet_800x480 -paz00 -peach-pi -peach-pit r7-tv-dongle riotboard +rock2 rpi_2 +rpi_3_32b smdkv310 snow spring diff --git a/uboot-tools.spec b/uboot-tools.spec index 7cb9c60..9abf0c8 100644 --- a/uboot-tools.spec +++ b/uboot-tools.spec @@ -2,7 +2,7 @@ Name: uboot-tools Version: 2016.03 -Release: 0.3%{?candidate:.%{candidate}}%{?dist} +Release: 0.4%{?candidate:.%{candidate}}%{?dist} Summary: U-Boot utilities Group: Development/Tools @@ -15,6 +15,7 @@ Patch1: 0004-Add-BOOTENV_INIT_COMMAND-for-commands-that-may-be-ne.patch Patch2: 0005-port-utilite-to-distro-generic-boot-commands.patch Patch3: 0001-Copy-gcc5-over-to-compiler-gcc6.h-as-a-beginning-of-.patch Patch4: mvebu-enable-generic-distro-boot-config.patch +Patch5: 0001-WIP-RPi-3-32-bit-port.patch BuildRequires: bc BuildRequires: dtc @@ -164,7 +165,10 @@ install -p -m 0644 tools/env/fw_env.config $RPM_BUILD_ROOT%{_sysconfdir} %endif %changelog -* Tue Mar 1 2016 Peter Robinson 2016.03-0.2rc3 +* Sun Mar 6 2016 Peter Robinson 2016.03-0.4rc3 +- Minor cleanups and new devices + +* Tue Mar 1 2016 Peter Robinson 2016.03-0.3rc3 - Update to 2016.03 RC3 * Tue Feb 16 2016 Peter Robinson 2016.03-0.2rc2