diff --git a/BeagleBoard.org-PocketBeagle.patch b/BeagleBoard.org-PocketBeagle.patch deleted file mode 100644 index abe9f3c..0000000 --- a/BeagleBoard.org-PocketBeagle.patch +++ /dev/null @@ -1,326 +0,0 @@ -From patchwork Wed Mar 7 10:40:41 2018 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [U-Boot,1/4] Add support for BeagleBoard.org PocketBeagle -X-Patchwork-Submitter: Jason Kridner -X-Patchwork-Id: 882566 -Message-Id: <20180307104044.4739-2-jdk@ti.com> -To: u-boot@lists.denx.de -Cc: Tom Rini , Jason Kridner -Date: Wed, 7 Mar 2018 05:40:41 -0500 -From: Jason Kridner -List-Id: U-Boot discussion - -Texas Instruments AM3358 based low-cost board using Octavo Systems OSD3358 SIP -with built-in TPS65217 PMIC and 512MB DDR3. Board features small 35mm x -55mm size, high-speed USB OTG, microSD and 72 0.1" expansion header -pins with 2xSPI, 2xI2C, 2xUART, USB, 8xADC, up-to-44 GPIO, PRU pins and much more. - -https://beagleboard.org/pocket - -This was tested using the am335x_evm_usbspl_defconfig. - -Note that MII pins are enabled despite not having Ethernet on this -board. This avoids an issue where otherwise many timeout errors would be -generated. See https://e2e.ti.com/support/arm/sitara_arm/f/791/t/298976 -for some related discussion. - -Signed-off-by: Jason Kridner -Cc: Tom Rini ---- - board/ti/am335x/board.c | 10 ++++++---- - board/ti/am335x/board.h | 7 ++++++- - board/ti/am335x/mux.c | 3 +++ - include/configs/am335x_evm.h | 2 ++ - 4 files changed, 17 insertions(+), 5 deletions(-) - -diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c -index b144fd1821..87bdd2d63d 100644 ---- a/board/ti/am335x/board.c -+++ b/board/ti/am335x/board.c -@@ -264,7 +264,7 @@ const struct dpll_params *get_dpll_ddr_params(void) - - if (board_is_evm_sk()) - return &dpll_ddr3_303MHz[ind]; -- else if (board_is_bone_lt() || board_is_icev2()) -+ else if (board_is_pb() || board_is_bone_lt() || board_is_icev2()) - return &dpll_ddr3_400MHz[ind]; - else if (board_is_evm_15_or_later()) - return &dpll_ddr3_303MHz[ind]; -@@ -295,7 +295,7 @@ const struct dpll_params *get_dpll_mpu_params(void) - if (bone_not_connected_to_ac_power()) - freq = MPUPLL_M_600; - -- if (board_is_bone_lt()) -+ if (board_is_pb() || board_is_bone_lt()) - freq = MPUPLL_M_1000; - - switch (freq) { -@@ -341,7 +341,7 @@ static void scale_vcores_bone(int freq) - * Override what we have detected since we know if we have - * a Beaglebone Black it supports 1GHz. - */ -- if (board_is_bone_lt()) -+ if (board_is_pb() || board_is_bone_lt()) - freq = MPUPLL_M_1000; - - switch (freq) { -@@ -542,7 +542,7 @@ void sdram_init(void) - if (board_is_evm_sk()) - config_ddr(303, &ioregs_evmsk, &ddr3_data, - &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); -- else if (board_is_bone_lt()) -+ else if (board_is_pb() || board_is_bone_lt()) - config_ddr(400, &ioregs_bonelt, - &ddr3_beagleblack_data, - &ddr3_beagleblack_cmd_ctrl_data, -@@ -931,6 +931,8 @@ int board_fit_config_name_match(const char *name) - return 0; - else if (board_is_bone_lt() && !strcmp(name, "am335x-boneblack")) - return 0; -+ else if (board_is_pb() && !strcmp(name, "am335x-pocketbeagle")) -+ return 0; - else if (board_is_evm_sk() && !strcmp(name, "am335x-evmsk")) - return 0; - else if (board_is_bbg1() && !strcmp(name, "am335x-bonegreen")) -diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h -index e13fcff02a..bab5b77f34 100644 ---- a/board/ti/am335x/board.h -+++ b/board/ti/am335x/board.h -@@ -34,6 +34,11 @@ static inline int board_is_bone_lt(void) - return board_ti_is("A335BNLT"); - } - -+static inline int board_is_pb(void) -+{ -+ return board_ti_is("A335PBGL"); -+} -+ - static inline int board_is_bbg1(void) - { - return board_is_bone_lt() && !strncmp(board_ti_get_rev(), "BBG1", 4); -@@ -41,7 +46,7 @@ static inline int board_is_bbg1(void) - - static inline int board_is_beaglebonex(void) - { -- return board_is_bone() || board_is_bone_lt() || board_is_bbg1(); -+ return board_is_pb() || board_is_bone() || board_is_bone_lt() || board_is_bbg1(); - } - - static inline int board_is_evm_sk(void) -diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c -index ad85b3a19a..aa187605d0 100644 ---- a/board/ti/am335x/mux.c -+++ b/board/ti/am335x/mux.c -@@ -390,6 +390,9 @@ void enable_board_pin_mux(void) - #else - configure_module_pin_mux(mmc1_pin_mux); - #endif -+ } else if (board_is_pb()) { -+ configure_module_pin_mux(mii1_pin_mux); -+ configure_module_pin_mux(mmc0_pin_mux); - } else if (board_is_icev2()) { - configure_module_pin_mux(mmc0_pin_mux); - configure_module_pin_mux(gpio0_18_pin_mux); -diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h -index 158b7d4e8e..8d45b6fade 100644 ---- a/include/configs/am335x_evm.h -+++ b/include/configs/am335x_evm.h -@@ -133,6 +133,8 @@ - "setenv fdtfile am335x-bone.dtb; fi; " \ - "if test $board_name = A335BNLT; then " \ - "setenv fdtfile am335x-boneblack.dtb; fi; " \ -+ "if test $board_name = A335PBGL; then " \ -+ "setenv fdtfile am335x-pocketbeagle.dtb; fi; " \ - "if test $board_name = BBBW; then " \ - "setenv fdtfile am335x-boneblack-wireless.dtb; fi; " \ - "if test $board_name = BBG1; then " \ - -From patchwork Wed Mar 7 10:40:42 2018 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [U-Boot,2/4] am335x_evm: scan more partitions and use uname_r -X-Patchwork-Submitter: Jason Kridner -X-Patchwork-Id: 882567 -Message-Id: <20180307104044.4739-3-jdk@ti.com> -To: u-boot@lists.denx.de -Cc: Tom Rini , Jason Kridner -Date: Wed, 7 Mar 2018 05:40:42 -0500 -From: Jason Kridner -List-Id: U-Boot discussion - -This enables mainline u-boot to boot the BeagleBoard.org Debian -distribution builds without extensive environment modifications. - -Some boot layouts only have a single partition on the -MMC/eMMC. This will scan those partitions after the second -partition that was already being scanned. - -Some layouts use uname_r to define the kernel being used for the boot to -support multiple kernels stored within the boot file system without -using symlinks. - -See http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0 for -more details on the BeagleBoard.org Debian image layout. - -Signed-off-by: Jason Kridner -Cc: Robert Nelson -Cc: Tom Rini ---- - include/configs/am335x_evm.h | 5 ++++- - include/environment/ti/mmc.h | 13 +++++++++---- - 2 files changed, 13 insertions(+), 5 deletions(-) - -diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h -index 8d45b6fade..32fe0e0cd5 100644 ---- a/include/configs/am335x_evm.h -+++ b/include/configs/am335x_evm.h -@@ -61,7 +61,10 @@ - #define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ - "bootcmd_" #devtypel #instance "=" \ - "setenv mmcdev " #instance"; "\ -- "setenv bootpart " #instance":2 ; "\ -+ "setenv bootpart " #instance":2; "\ -+ "run mmcboot;"\ -+ "setenv mmcdev " #instance"; "\ -+ "setenv bootpart " #instance":1; "\ - "run mmcboot\0" - - #define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \ -diff --git a/include/environment/ti/mmc.h b/include/environment/ti/mmc.h -index 4305ebdaaf..b803ecccb7 100644 ---- a/include/environment/ti/mmc.h -+++ b/include/environment/ti/mmc.h -@@ -23,9 +23,10 @@ - "bootenvfile=uEnv.txt\0" \ - "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ - "env import -t ${loadaddr} ${filesize}\0" \ -- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}\0" \ -- "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -- "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ -+ "loadbootenv=if fatload mmc ${mmcdev} ${loadaddr} ${bootdir}/${bootenvfile}; then echo Found ${bootdir}/${bootenvfile} in FAT partition; else load mmc ${mmcdev} ${loadaddr} ${bootdir}/${bootenvfile}; fi\0" \ -+ "loadimage=if test -n ${uname_r}; then load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/vmlinuz-${uname_r}; run loadrd; else load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}; fi\0" \ -+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/initrd.img-${uname_r}; setenv rdsize ${filesize}\0" \ -+ "loadfdt=if test -n ${uname_r}; then load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtbs/${uname_r}/${fdtfile}; else load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}; fi;\0" \ - "envboot=mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ -@@ -45,7 +46,11 @@ - "mmcloados=run args_mmc; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ -- "bootz ${loadaddr} - ${fdtaddr}; " \ -+ "if test -n ${uname_r}; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \ -+ "else " \ -+ "bootz ${loadaddr} - ${fdtaddr}; " \ -+ "fi; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - -From patchwork Wed Mar 7 10:40:43 2018 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [U-Boot,3/4] Handle NETCONSOLE and SPL enabled -X-Patchwork-Submitter: Jason Kridner -X-Patchwork-Id: 882568 -Message-Id: <20180307104044.4739-4-jdk@ti.com> -To: u-boot@lists.denx.de -Cc: Joe Hershberger , - Jason Kridner , Jason Kridner -Date: Wed, 7 Mar 2018 05:40:43 -0500 -From: Jason Kridner -List-Id: U-Boot discussion - -From: Jason Kridner - -NETCONSOLE isn't compiled in with SPL, so the include file needs to recognize that. - -Signed-off-by: Jason Kridner -Cc: Joe Hershberger ---- - include/net.h | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -diff --git a/include/net.h b/include/net.h -index 455b48f6c7..3101096e9a 100644 ---- a/include/net.h -+++ b/include/net.h -@@ -676,7 +676,7 @@ int net_send_udp_packet(uchar *ether, struct in_addr dest, int dport, - /* Processes a received packet */ - void net_process_received_packet(uchar *in_packet, int len); - --#ifdef CONFIG_NETCONSOLE -+#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD) - void nc_start(void); - int nc_input_packet(uchar *pkt, struct in_addr src_ip, unsigned dest_port, - unsigned src_port, unsigned len); -@@ -684,7 +684,7 @@ int nc_input_packet(uchar *pkt, struct in_addr src_ip, unsigned dest_port, - - static __always_inline int eth_is_on_demand_init(void) - { --#ifdef CONFIG_NETCONSOLE -+#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD) - extern enum proto_t net_loop_last_protocol; - - return net_loop_last_protocol != NETCONS; -@@ -695,7 +695,7 @@ static __always_inline int eth_is_on_demand_init(void) - - static inline void eth_set_last_protocol(int protocol) - { --#ifdef CONFIG_NETCONSOLE -+#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD) - extern enum proto_t net_loop_last_protocol; - - net_loop_last_protocol = protocol; - -From patchwork Wed Mar 7 10:40:44 2018 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [U-Boot,4/4] am335x: am335x_evm_usbspl_defconfig: NETCONSOLE -X-Patchwork-Submitter: Jason Kridner -X-Patchwork-Id: 882569 -Message-Id: <20180307104044.4739-5-jdk@ti.com> -To: u-boot@lists.denx.de -Cc: Tom Rini , Jason Kridner -Date: Wed, 7 Mar 2018 05:40:44 -0500 -From: Jason Kridner -List-Id: U-Boot discussion - -Enable NETCONSOLE by default. Still requires changes to the boot -environment to enable on the platform. - -Signed-of-by: Jason Kridner -Cc: Tom Rini ---- - configs/am335x_evm_usbspl_defconfig | 7 +++++++ - 1 file changed, 7 insertions(+) - -diff --git a/configs/am335x_evm_usbspl_defconfig b/configs/am335x_evm_usbspl_defconfig -index e4bf757923..19f7c49951 100644 ---- a/configs/am335x_evm_usbspl_defconfig -+++ b/configs/am335x_evm_usbspl_defconfig -@@ -6,7 +6,13 @@ CONFIG_AM33XX=y - CONFIG_DISTRO_DEFAULTS=y - # CONFIG_ANDROID_BOOT_IMAGE is not set - CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -+CONFIG_CONSOLE_MUX=y -+CONFIG_SYS_CONSOLE_IS_IN_ENV=y -+# CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE is not set -+CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y - CONFIG_SYS_CONSOLE_INFO_QUIET=y -+# CONFIG_SYS_STDIO_DEREGISTER is not set -+# CONFIG_FIT_EMBED is not set - CONFIG_VERSION_VARIABLE=y - CONFIG_ARCH_MISC_INIT=y - CONFIG_SPL=y -@@ -50,3 +56,4 @@ CONFIG_USB_ETHER=y - CONFIG_LZO=y - CONFIG_OF_LIBFDT=y - CONFIG_OF_LIBFDT_OVERLAY=y -+CONFIG_NETCONSOLE=y diff --git a/mvneta-support-setting-hardware-address.patch b/mvneta-support-setting-hardware-address.patch deleted file mode 100644 index f0e840d..0000000 --- a/mvneta-support-setting-hardware-address.patch +++ /dev/null @@ -1,53 +0,0 @@ -From patchwork Tue Mar 27 17:18:25 2018 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [U-Boot] net: mvneta: support setting hardware address -X-Patchwork-Submitter: Matt Pelland -X-Patchwork-Id: 891783 -Message-Id: <20180327171825.12742-1-mpelland@starry.com> -To: u-boot@lists.denx.de -Date: Tue, 27 Mar 2018 13:18:25 -0400 -From: Matt Pelland -List-Id: U-Boot discussion - -mvneta already supports setting the MAC address but this was only done -internally when some other part of U-Boot tries to actually use the -interface. This commit exposes this functionality to the ethernet core -code so that the MAC addresses of all interfaces are configured -correctly even if they are not used before loading Linux. - -Signed-off-by: Matt Pelland ---- - drivers/net/mvneta.c | 11 +++++++++++ - 1 file changed, 11 insertions(+) - -diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c -index 83e3153768..fdff772178 100644 ---- a/drivers/net/mvneta.c -+++ b/drivers/net/mvneta.c -@@ -890,6 +890,16 @@ static void mvneta_mac_addr_set(struct mvneta_port *pp, unsigned char *addr, - mvneta_set_ucast_addr(pp, addr[5], queue); - } - -+static int mvneta_write_hwaddr(struct udevice *dev) -+{ -+ mvneta_mac_addr_set( -+ dev_get_priv(dev), -+ ((struct eth_pdata *)dev_get_platdata(dev))->enetaddr, -+ rxq_def); -+ -+ return 0; -+} -+ - /* Handle rx descriptor fill by setting buf_cookie and buf_phys_addr */ - static void mvneta_rx_desc_fill(struct mvneta_rx_desc *rx_desc, - u32 phys_addr, u32 cookie) -@@ -1753,6 +1763,7 @@ static const struct eth_ops mvneta_ops = { - .send = mvneta_send, - .recv = mvneta_recv, - .stop = mvneta_stop, -+ .write_hwaddr = mvneta_write_hwaddr, - }; - - static int mvneta_ofdata_to_platdata(struct udevice *dev) diff --git a/sources b/sources index 4c1afeb..1afc7c3 100644 --- a/sources +++ b/sources @@ -1 +1 @@ -SHA512 (u-boot-2018.05-rc1.tar.bz2) = c765ffccc82a90f216155407a4d409df7d4fd19c588e5d2224dabb1723091b62048b7df64671654adaee765b2536fc5a0f80f6490cffca9d201c523d54484513 +SHA512 (u-boot-2018.05-rc2.tar.bz2) = 98db34f69d08f8e40cc2b1eb7c301b29cd82d638f8d93284aaf598eb8efafd7cf5af98449811bdc98164381451e815741ff95a6e10ad3335b038ab31de712bb4 diff --git a/uboot-tools.spec b/uboot-tools.spec index ac44da7..31340d4 100644 --- a/uboot-tools.spec +++ b/uboot-tools.spec @@ -1,4 +1,4 @@ -%global candidate rc1 +%global candidate rc2 Name: uboot-tools Version: 2018.05 @@ -21,15 +21,13 @@ Patch1: uefi-use-Fedora-specific-path-name.patch Patch2: uefi-distro-load-FDT-from-any-partition-on-boot-device.patch Patch3: usb-kbd-fixes.patch Patch4: rk33xx-make_fit_atf-fix.patch -Patch5: rk33xx-enable-make-itb.patch +#Patch5: rk33xx-enable-make-itb.patch # Board fixes and enablement Patch10: dragonboard-fixes.patch -Patch11: BeagleBoard.org-PocketBeagle.patch Patch12: mx6cuboxi-add-support-for-detecting-Revision-1.5-SoM.patch -Patch13: rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch +#Patch13: rpi-Enable-using-the-DT-provided-by-the-Raspberry-Pi.patch Patch19: mmc-mv_sdhci-zero-out-sdhci_host-structure.patch -Patch20: mvneta-support-setting-hardware-address.patch Patch21: sunxi-improve-throughput-in-the-sunxi_mmc-driver.patch # Patch99: mvebu-enable-generic-distro-boot-config.patch @@ -265,7 +263,7 @@ cp -p board/warp7/README builds/docs/README.warp7 %files %doc README doc/README.imximage doc/README.kwbimage doc/README.distro doc/README.gpt -%doc doc/README.odroid doc/README.rockchip doc/README.efi doc/uImage.FIT doc/README.arm64 +%doc doc/README.odroid doc/README.rockchip doc/README.uefi doc/uImage.FIT doc/README.arm64 %doc doc/README.chromium builds/docs/* %{_bindir}/* %{_mandir}/man1/mkimage.1*