drop old patches

rockchip-PinePhone-Pro-fixes.patch

@@ -1,43 +0,0 @@
-From 1af5e42f170d2c4b944beeb875b80ec7f061038a Mon Sep 17 00:00:00 2001
-From: Ondrej Jirman <megi@xff.cz>
-Date: Thu, 25 May 2023 15:27:08 +0200
-Subject: [PATCH] pinephone-pro: Fix I/O port voltage (GPIO3D4A is 1.8V)
-
-This fixes access to camera sensor over I2C during probe time in
-the kernel. (Kernel will fix I/0 port voltage by itself, but the
-timing depends on probe order of the drivers, so the fix can
-come after the camera sensor driver already failed to probe.)
-
-Signed-off-by: Ondrej Jirman <megi@xff.cz>
-Cc: Kever Yang <kever.yang@rock-chips.com>
-Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
----
- board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
-diff --git a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
-index eb639cd0d07..b6ccbb9c1c4 100644
---- a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
-+++ b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
-@@ -15,7 +15,8 @@
- #include <asm/arch-rockchip/misc.h>
- #include <power/regulator.h>
- 
--#define GRF_IO_VSEL_BT565_SHIFT 0
-+#define GRF_IO_VSEL_BT565_GPIO2AB 1
-+#define GRF_IO_VSEL_AUDIO_GPIO3D4A 2
- #define PMUGRF_CON0_VSEL_SHIFT 8
- 
- #ifndef CONFIG_SPL_BUILD
-@@ -48,7 +49,8 @@ static void setup_iodomain(void)
- 	   syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
- 
- 	/* BT565 is in 1.8v domain */
--	rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
-+	rk_setreg(&grf->io_vsel,
-+		  GRF_IO_VSEL_BT565_GPIO2AB | GRF_IO_VSEL_AUDIO_GPIO3D4A);
- 
- 	/* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
- 	rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
--- 
-2.41.0

rockchip-general-fixes.patch

@@ -1,136 +0,0 @@
-From 2d9350c50a9659cc2a247cdea07f0eacffa3cb32 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Sun, 12 Jun 2022 14:44:44 +0100
-Subject: [PATCH] rockchip: pinebook-pro: minor SPI flash fixes
-
-Set a default offset for environment so it doesn't write it to
-unexpected locations, drop unneeded mtd config option.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- configs/pinebook-pro-rk3399_defconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig
-index 8ca1d0708f9..aaa52c6ea70 100644
---- a/configs/pinebook-pro-rk3399_defconfig
-+++ b/configs/pinebook-pro-rk3399_defconfig
-@@ -5,6 +5,7 @@ CONFIG_ARCH_ROCKCHIP=y
- CONFIG_SYS_TEXT_BASE=0x00200000
- CONFIG_NR_DRAM_BANKS=1
- CONFIG_ENV_SIZE=0x8000
-+CONFIG_ENV_OFFSET=0x3F8000
- CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro"
- CONFIG_ROCKCHIP_RK3399=y
- CONFIG_TARGET_PINEBOOK_PRO_RK3399=y
-@@ -22,7 +23,6 @@ CONFIG_MISC_INIT_R=y
- # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
- CONFIG_SPL_STACK_R=y
- CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
--CONFIG_SPL_MTD_SUPPORT=y
- CONFIG_SPL_SPI_LOAD=y
- CONFIG_TPL=y
- CONFIG_CMD_BOOTZ=y
--- 
-2.36.1
-
-From 27ba8e2f904063aec5196f86dd0332bf58a60259 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Sun, 12 Jun 2022 14:50:42 +0100
-Subject: [PATCH] rockchip: rockpro64: enable leds
-
-The Rockpro64 has some GPIO leds so let's enable them so the
-user gets some output in early boot.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- configs/rockpro64-rk3399_defconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
-index e6f7a8469a3..b0c3527fab0 100644
---- a/configs/rockpro64-rk3399_defconfig
-+++ b/configs/rockpro64-rk3399_defconfig
-@@ -42,6 +42,8 @@ CONFIG_AHCI_PCI=y
- CONFIG_SATA_SIL=y
- CONFIG_ROCKCHIP_GPIO=y
- CONFIG_SYS_I2C_ROCKCHIP=y
-+CONFIG_LED=y
-+CONFIG_LED_GPIO=y
- CONFIG_MISC=y
- CONFIG_ROCKCHIP_EFUSE=y
- CONFIG_MMC_DW=y
--- 
-2.36.1
-
-From 8bca90472e0d71e5344711b6f5fe8dc95e19af5a Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Sun, 12 Jun 2022 15:12:47 +0100
-Subject: [PATCH] rockchip: pinebook-pro: sync PBP dtb to 5.18
-
-Sync the pinebook pro to upstream 5.18, in particular this brings
-brings in a fix so the DP is disabled so Linux will actually boot.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- arch/arm/dts/rk3399-pinebook-pro.dts | 11 +++--------
- 1 file changed, 3 insertions(+), 8 deletions(-)
-
-diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts b/arch/arm/dts/rk3399-pinebook-pro.dts
-index 2b5f001ff4a..d6b68d77d63 100644
---- a/arch/arm/dts/rk3399-pinebook-pro.dts
-+++ b/arch/arm/dts/rk3399-pinebook-pro.dts
-@@ -17,6 +17,7 @@
- / {
- 	model = "Pine64 Pinebook Pro";
- 	compatible = "pine64,pinebook-pro", "rockchip,rk3399";
-+	chassis-type = "laptop";
- 
- 	aliases {
- 		mmc0 = &sdio0;
-@@ -242,12 +243,12 @@
- 	vdd_log: vdd-log {
- 		compatible = "pwm-regulator";
- 		pwms = <&pwm2 0 25000 1>;
-+		pwm-supply = <&vcc_sysin>;
- 		regulator-name = "vdd_log";
- 		regulator-always-on;
- 		regulator-boot-on;
- 		regulator-min-microvolt = <800000>;
- 		regulator-max-microvolt = <1400000>;
--		vin-supply = <&vcc_sysin>;
- 
- 		regulator-state-mem {
- 			regulator-on-in-suspend;
-@@ -385,10 +386,6 @@
- 	};
- };
- 
--&cdn_dp {
--	status = "okay";
--};
--
- &cpu_b0 {
- 	cpu-supply = <&vdd_cpu_b>;
- };
-@@ -475,8 +472,6 @@
- 		vcc10-supply = <&vcc_sysin>;
- 		vcc11-supply = <&vcc_sysin>;
- 		vcc12-supply = <&vcc3v3_sys>;
--		vcc13-supply = <&vcc_sysin>;
--		vcc14-supply = <&vcc_sysin>;
- 
- 		regulators {
- 			/* rk3399 center logic supply */
-@@ -711,7 +706,7 @@
- 
- 		connector {
- 			compatible = "usb-c-connector";
--			data-role = "host";
-+			data-role = "dual";
- 			label = "USB-C";
- 			op-sink-microwatt = <1000000>;
- 			power-role = "dual";
--- 
-2.36.1
-