uboot-tools/0008-convert-pandaboard-to-use-generic-boot-commands.patch

From dfdd6312dc00d1b2dde14f00fe7bd7fb4e8bdd2c Mon Sep 17 00:00:00 2001
From: Dennis Gilmore <dennis@ausil.us>
Date: Sat, 15 Mar 2014 10:26:49 -0500
Subject: [PATCH 8/8] convert pandaboard to use generic boot commands

---
 include/configs/omap4_panda.h     |  3 ---
 include/configs/ti_omap4_common.h | 34 ++++++++--------------------------
 2 files changed, 8 insertions(+), 29 deletions(-)

diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 7378acd..26f7aee 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -33,11 +33,8 @@
 
 #define CONFIG_UBOOT_ENABLE_PADS_ALL
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 
 #include <configs/ti_omap4_common.h>
-#define CONFIG_CMD_NET
 
 /* GPIO */
 #define CONFIG_CMD_GPIO
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index 387f570..a92e681 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -102,16 +102,16 @@
 		"vram=${vram} " \
 		"root=${mmcroot} " \
 		"rootfstype=${mmcrootfstype}\0" \
-	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+	"loadbootscript=load mmc ${mmcdev} ${kernel_addr_r} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-		"source ${loadaddr}\0" \
-	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
+		"source ${kernel_addr_r}\0" \
+	"loadbootenv=load mmc ${mmcdev} ${kernel_addr_r} uEnv.txt\0" \
 	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
-		"env import -t ${loadaddr} ${filesize}\0" \
-	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+		"env import -t ${kernel_addr_r} ${filesize}\0" \
+	"loadimage=load mmc ${bootpart} ${kernel_addr_r} ${bootdir}/${bootfile}\0" \
 	"mmcboot=echo Booting from mmc${mmcdev} ...; " \
 		"run mmcargs; " \
-		"bootz ${loadaddr} - ${fdtaddr}\0" \
+		"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 	"findfdt="\
 		"if test $board_name = sdp4430; then " \
 			"setenv fdtfile omap4-sdp.dtb; fi; " \
@@ -123,29 +123,11 @@
 			"setenv fdtfile omap4-panda-es.dtb; fi;" \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine device tree to use; fi; \0" \
-	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+	"loadfdt=load mmc ${bootpart} ${fdt_addr_r} ${bootdir}/${fdtfile}\0" \
 
 #define CONFIG_BOOTCOMMAND \
 	"run findfdt; " \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"echo SD/MMC found on device ${mmcdev};" \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"else " \
-			"if run loadbootenv; then " \
-				"run importbootenv; " \
-			"fi;" \
-			"if test -n ${uenvcmd}; then " \
-				"echo Running uenvcmd ...;" \
-				"run uenvcmd;" \
-			"fi;" \
-		"fi;" \
-		"if run loadimage; then " \
-			"run loadfdt;" \
-			"run mmcboot; " \
-		"fi; " \
-	"fi"
-
+	for target in ${boot_targets}; do run bootcmd_${target}; done
 /*
  * Defines for SPL
  * It is known that this will break HS devices. Since the current size of
-- 
1.9.0