sed/sedfaq.txt
Jakub Jelinek 1bfe7ce11a 4.1.2-2
2004-10-02 19:01:05 +00:00

3965 lines
164 KiB
Plaintext

Archive-Name: editor-faq/sed
Posting-Frequency: irregular
Last-modified: 10 March 2003
Version: 015
URL: http://sed.sourceforge.net/sedfaq.html
Maintainer: Eric Pement (pemente@northpark.edu)
THE SED FAQ
Frequently Asked Questions about
sed, the stream editor
CONTENTS
1. GENERAL INFORMATION
1.1. Introduction - How this FAQ is organized
1.2. Latest version of the sed FAQ
1.3. FAQ revision information
1.4. How do I add a question/answer to the sed FAQ?
1.5. FAQ abbreviations
1.6. Credits and acknowledgements
1.7. Standard disclaimers
2. BASIC SED
2.1. What is sed?
2.2. What versions of sed are there, and where can I get them?
2.2.1. Free versions
2.2.1.1. Unix platforms
2.2.1.2. OS/2
2.2.1.3. Microsoft Windows (Win3x, Win9x, WinNT, Win2K)
2.2.1.4. MS-DOS
2.2.1.5. CP/M
2.2.1.6. Macintosh v8 or v9
2.2.2. Shareware and Commercial versions
2.2.2.1. Unix platforms
2.2.2.2. OS/2
2.2.2.3. Windows 95/98, Windows NT, Windows 2000
2.2.2.4. MS-DOS
2.3. Where can I learn to use sed?
2.3.1. Books
2.3.2. Mailing list
2.3.3. Tutorials, electronic text
2.3.4. General web and ftp sites
3. TECHNICAL
3.1. More detailed explanation of basic sed
3.1.1. Regular expressions on the left side of "s///"
3.1.2. Escape characters on the right side of "s///"
3.1.3. Substitution switches
3.2. Common one-line sed scripts. How do I . . . ?
- double/triple-space a file?
- convert DOS/Unix newlines?
- delete leading/trailing spaces?
- do substitutions on all/certain lines?
- delete consecutive blank lines?
- delete blank lines at the top/end of the file?
3.3. Addressing and address ranges
3.4. Address ranges in GNU sed and HHsed
3.5. Debugging sed scripts
3.6. Notes about s2p, the sed-to-perl translator
3.7. GNU/POSIX extensions to regular expressions
4. EXAMPLES
ONE-CHARACTER QUESTIONS
4.1. How do I insert a newline into the RHS of a substitution?
4.2. How do I represent control-codes or non-printable characters?
4.3. How do I convert files with toggle characters, like +this+,
to look like [i]this[/i]?
CHANGING STRINGS
4.10. How do I perform a case-insensitive search?
4.11. How do I match only the first occurrence of a pattern?
4.12. How do I parse a comma-delimited (CSV) data file?
4.13. How do I handle fixed-length, columnar data?
4.14. How do I commify a string of numbers?
4.15. How do I prevent regex expansion on substitutions?
4.16. How do I convert a string to all lowercase or capital letters?
CHANGING BLOCKS (consecutive lines)
4.20. How do I change only one section of a file?
4.21. How do I delete or change a block of text if the block contains
a certain regular expression?
4.22. How do I locate a paragraph of text if the paragraph contains a
certain regular expression?
4.23. How do I match a block of specific consecutive lines?
4.23.1. Try to use a "/range/, /expression/"
4.23.2. Try to use a "multi-line\nexpression"
4.23.3. Try to use a block of "literal strings"
4.24. How do I address all the lines between RE1 and RE2, excluding the lines themselves?
4.25. How do I join two lines if line #1 ends in a [certain string]?
4.26. How do I join two lines if line #2 begins in a [certain string]?
4.27. How do I change all paragraphs to long lines?
SHELL AND ENVIRONMENT
4.30. How do I read environment variables with sed ...
4.31.1. ... on Unix platforms?
4.31.2. ... on MS-DOS or 4DOS platforms?
4.32. How do I export or pass variables back into the environment ...
4.32.1. ... on Unix platforms?
4.32.2. ... on MS-DOS or 4DOS platforms?
4.33. How do I handle shell quoting in sed?
FILES, DIRECTORIES, AND PATHS
4.40. How do I read (insert/add) a file at the top of a textfile?
4.41. How do I make substitutions in every file in a directory, or
in a complete directory tree?
4.41.1. ... ssed solution
4.41.2. ... Unix solution
4.41.3. ... DOS solution
4.42. How do I replace "/some/UNIX/path" in a substitution?
4.43. How do I replace "C:\SOME\DOS\PATH" in a substitution?
4.44. How do I emulate file-includes, using sed?
5. WHY ISN'T THIS WORKING?
5.1. Why don't my variables like $var get expanded in my sed script?
5.2. I'm using 'p' to print, but I have duplicate lines sometimes.
5.3. Why does my DOS version of sed process a file part-way through
and then quit?
5.4. My RE isn't matching/deleting what I want it to. (Or, "Greedy vs.
stingy pattern matching")
5.5. What is CSDPMI*B.ZIP and why do I need it?
5.6. Where are the man pages for GNU sed?
5.7. How do I tell what version of sed I am using?
5.8. Does sed issue an exit code?
5.9. The 'r' command isn't inserting the file into the text.
5.10. Why can't I match or delete a newline using the \n escape
sequence? Why can't I match 2 or more lines using \n?
5.11. My script aborts with an error message, "event not found".
6. OTHER ISSUES
6.1. I have a problem that stumps me. Where can I get help?
6.2. How does sed compare with awk, perl, and other utilities?
6.3. When should I use sed?
6.4. When should I NOT use sed?
6.5. When should I ignore sed and use Awk or Perl instead?
6.6. Known limitations among sed versions
6.7. Known incompatibilities between sed versions
6.7.1. Issuing commands from the command line
6.7.2. Using comments (prefixed by the '#' sign)
6.7.3. Special syntax in REs
6.7.4. Word boundaries
6.7.5. Commands which operate differently
7. KNOWN BUGS AMONG SED VERSIONS
7.1. ssed v3.59
7.2. GNU sed v4.0 - v4.0.5
7.3. GNU sed v3.02.80
7.4. GNU sed v3.02
7.5. GNU sed v2.05
7.6. GNU sed v1.18
7.7. GNU sed v1.03
7.8. sed v1.6 (Briscoe)
7.9. sed v1.5 (Helman)
7.10. sedmod v1.0 (Chen)
7.11. HP-UX sed
7.12. SunOS sed v4.1
7.13. SunOS sed v5.6
7.14. Ultrix sed v4.3
7.15. Digital Unix sed
------------------------------
1. GENERAL INFORMATION
1.1. Introduction - How this FAQ is organized
This FAQ is organized to answer common (and some uncommon)
questions about sed, quickly. If you see a term or abbreviation in
the examples that seems unclear, see if the term is defined in
section 1.5. If not, send your comment to pemente[at]northpark.edu.
1.2. Latest version of the sed FAQ
The newest version of the sed FAQ is usually here:
http://sed.sourceforge.net/sedfaq.html (HTML version)
http://sed.sourceforge.net/sedfaq.txt (plain text)
http://www.student.northpark.edu/pemente/sed/sedfaq.html
http://www.student.northpark.edu/pemente/sed/sedfaq.txt
http://www.faqs.org/faqs/editor-faq/sed
ftp://rtfm.mit.edu/pub/faqs/editor-faq/sed
Another FAQ file on sed by a different author can be found here:
http://www.dreamwvr.com/sed-info/sed-faq.html
1.3. FAQ revision information
In the plaintext version, changes are shown by a vertical bar (|)
placed in column 78 of the affected lines. To remove the vertical
bars (use double quotes for MS-DOS):
sed 's/ *|$//' sedfaq.txt > sedfaq2.txt
In the HTML version, vertical bars do not appear. New or altered
portions of the FAQ are indicated by printing in dark blue type.
In the text version, words needing emphasis may be surrounded by
the underscore '_' or the asterisk '*'. In the HTML version, these
are changed to italics and boldface, respectively.
1.4. How do I add a question/answer to the sed FAQ?
Word your question briefly and send it to pemente[at]northpark.edu,
indicating your proposed change. We'll post it on the sed-users
mailing list (see section 2.3.2) and discuss it there. If it's
good, your contribution will be added to the next edition.
1.5. FAQ abbreviations
files = one or more filenames, separated by whitespace
gsed = GNU sed
ssed = super-sed
RE = Regular Expressions supported by sed
LHS = the left-hand side ("find" part) of "s/find/repl/" command
RHS = the right-hand side ("replace" part) of "s/find/repl/" cmd
nn+ = version _nn_ or higher (e.g., "15+" = version 1.5 and above)
files: "files" stands for one or more filenames entered on the
command line. The names may include any wildcards your shell
understands (such as ``zork*'' or ``Aug[4-9].let''). Sed will
process each filename passed to it by the shell.
RE: For details on regular expressions, see section 3.1.1., below.
1.6. Credits and acknowledgements
Many of the ideas for this FAQ were taken from the Awk FAQ:
http://www.faqs.org/faqs/computer-lang/awk/faq/
ftp://rtfm.mit.edu/pub/usenet/comp.lang.awk/faq
and from the old Perl FAQ:
http://www.perl.com/doc/FAQs/FAQ/oldfaq-html/index.html
The following individuals have contributed significantly to this
document, and have provided input and wording suggestions for
questions, answers, and script examples. Credit goes to these
contributors (in alphabetical order by last name):
Al Aab, Yiorgos Adamopoulos, Paolo Bonzini, Walter Briscoe, Jim
Dennis, Carlos Duarte, Otavio Exel, Sven Guckes, Aurelio Jargas,
Mark Katz, Toby Kelsey, Eric Pement, Greg Pfeiffer, Ken Pizzini,
Niall Smart, Simon Taylor, Peter Tillier, Greg Ubben, Laurent
Vogel.
1.7. Standard disclaimers
While a serious attempt has been made to ensure the accuracy of the
information presented herein, the contributors and maintainers of
this document do not claim the absence of errors and make no
warranties on the information provided. If you notice any mistakes,
please let us know so we can fix it.
------------------------------
2. BASIC SED
2.1. What is sed?
"sed" stands for Stream EDitor. Sed is a non-interactive editor,
written by the late Lee E. McMahon in 1973 or 1974. A brief history
of sed's origins may be found in an early history of the Unix
tools, at <http://www.columbia.edu/~rh120/ch106.x09>.
Instead of altering a file interactively by moving the cursor on
the screen (as with a word processor), the user sends a script of
editing instructions to sed, plus the name of the file to edit (or
the text to be edited may come as output from a pipe). In this
sense, sed works like a filter -- deleting, inserting and changing
characters, words, and lines of text. Its range of activity goes
from small, simple changes to very complex ones.
Sed reads its input from stdin (Unix shorthand for "standard
input," i.e., the console) or from files (or both), and sends the
results to stdout ("standard output," normally the console or
screen). Most people use sed first for its substitution features.
Sed is often used as a find-and-replace tool.
sed 's/Glenn/Harold/g' oldfile >newfile
will replace every occurrence of "Glenn" with the word "Harold",
wherever it occurs in the file. The "find" portion is a regular
expression ("RE"), which can be a simple word or may contain
special characters to allow greater flexibility (for example, to
prevent "Glenn" from also matching "Glennon").
My very first use of sed was to add 8 spaces to the left side of a
file, so when I printed it, the printing wouldn't begin at the
absolute left edge of a piece of paper.
sed 's/^/ /' myfile >newfile # my first sed script
sed 's/^/ /' myfile | lp # my next sed script
Then I learned that sed could display only one paragraph of a file,
beginning at the phrase "and where it came" and ending at the
phrase "for all people". My script looked like this:
sed -n '/and where it came/,/for all people/p' myfile
Sed's normal behavior is to print (i.e., display or show on screen)
the entire file, including the parts that haven't been altered,
unless you use the -n switch. The "-n" stands for "no output". This
switch is almost always used in conjunction with a 'p' command
somewhere, which says to print only the sections of the file that
have been specified. The -n switch with the 'p' command allow for
parts of a file to be printed (i.e., sent to the console).
Next, I found that sed could show me only (say) lines 12-18 of a
file and not show me the rest. This was very handy when I needed to
review only part of a long file and I didn't want to alter it.
# the 'p' stands for print
sed -n 12,18p myfile
Likewise, sed could show me everything else BUT those particular
lines, without physically changing the file on the disk:
# the 'd' stands for delete
sed 12,18d myfile
Sed could also double-space my single-spaced file when it came time
to print it:
sed G myfile >newfile
If you have many editing commands (for deleting, adding,
substituting, etc.) which might take up several lines, those
commands can be put into a separate file and all of the commands in
the file applied to file being edited:
# 'script.sed' is the file of commands
# 'myfile' is the file being changed
sed -f script.sed myfile # 'script.sed' is the file of commands
It is not our intention to convert this FAQ file into a full-blown
sed tutorial (for good tutorials, see section 2.3). Rather, we hope
this gives the complete novice a few ideas of how sed can be used.
2.2. What versions of sed are there, and where can I get them?
2.2.1. Free versions
Note: "Free" does not mean "public domain" nor does it necessarily
mean you will never be charged for it. All versions of sed in this
section except the CP/M versions are based on the GNU general
public license and are "free software" by that standard (for
details, see http://www.gnu.org/philosophy/free-sw.html). This
means you can get the source code and develop it further.
At the URLs listed in this category, sed binaries or source code
can be downloaded and used without fees or license payments.
2.2.1.1. Unix platforms
ssed v3.60
ssed is the version recommended by the FAQ maintainers, since it
shares the same codebase with GNU sed, has the most options, and is
free software (you can get the source). Though there were earlier
version of ssed distributed, sites for these are not being listed.
http://sed.sourceforge.net/grabbag/ssed
http://freshmeat.net/project/sed/
GNU sed v4.0.5
This is the latest official version of GNU sed. It offers in-place
text replacement as an option switch.
ftp://ftp.gnu.org/pub/gnu/sed/sed-4.0.5.tar.gz
http://freshmeat.net/project/sed
BSD multi-byte sed (Japanese)
Based on the latest version of GNU sed, which supports multi-byte
characters.
ftp://ftp1.freebsd.org/pub/FreeBSD/FreeBSD-stable/packages/Latest/ja-sed.tgz
GNU sed v3.02.80
An alpha test release which was the base for the development of
ssed and GNU sed v4.0.
ftp://alpha.gnu.org/pub/gnu/sed/sed-3.02.80.tar.gz
GNU sed v3.02a
Interim version with most features of GNU sed v3.02.80.
GNU sed v3.02
ftp://ftp.gnu.org/pub/gnu/sed/sed-3.02.tar.gz
Precompiled versions:
GNU sed v3.02-8
source code and binaries for Debian GNU/Linux
http://www.debian.org/Packages/stable/base/sed.html
For some time, the GNU project <http://www.gnu.org> used Eric S.
Raymond's version of sed (ESR sed v1.1), but eventually dropped it
because it had too many built-in limits. In 1991 Howard Helman
modified the GNU/ESR sed and produced a flexible version of sed
v1.5 available at several sites (Helman's version permitted things
like \<...\> to delimit word boundaries, \xHH to enter hex code and
\n to indicate newlines in the replace string). This version did
not catch on with the GNU project and their version of sed has
moved in a similar but different direction.
sed v1.3, by Eric Steven Raymond (released 4 June 1998)
http://catb.org/~esr/sed-1.3.tar.gz
Eric Raymond <esr@snark.thyrsus.com> wrote one of the earliest
versions of sed. On his website <http://www.catb.org/~esr/> which
also distributes many freeware utilities he has written or worked
on, he describes sed v1.1 this way:
"This is the fast, small sed originally distributed in the GNU
toolkit and still distributed with Minix. The GNU people ditched it
when they built their own sed around an enhanced regex package --
but it's still better for some uses (in particular, faster and less
memory-intensive)." (Version 1.3 fixes an unidentified bug and adds
the L command to hexdump the current pattern space.)
2.2.1.2. OS/2
GNU sed v3.02.80
http://www2s.biglobe.ne.jp/~vtgf3mpr/gnu/sed.htm
GNU sed v3.02
http://hobbes.nmsu.edu/pub/os2/util/file/sed-3_02-r2-bin.zip # binaries
http://hobbes.nmsu.edu/pub/os2/util/file/sed-3_02-r2.zip # source
2.2.1.3. Microsoft Windows (Win3x, Win9x, WinNT, Win2K)
GNU sed v4.0.5
32-bit binaries and docs. Precompiled versions not available (yet).
GNU sed v3.02.80
32-bit binaries and docs, using DJGPP compiler. For details on new
features, see Unix section, above.
http://www.student.northpark.edu/pemente/sed/sed3028a.zip # DOS binaries
ftp://alpha.gnu.org/pub/gnu/sed/sed-3.02.80.tar.gz # source
ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/sed3028b.zip # binaries
ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/sed3028d.zip # docs
ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/sed3028s.zip # source
GNU sed v2.05
32-bit binaries, no docs. Requires 80386 DX (SX will not run) and
must be run in a DOS window or in a full screen DOS session under
Microsoft Windows. Will not run in MS-DOS mode (outside Win/Win95).
We recommend using the latest version of GNU sed.
http://www.simtel.net/pub/win95/prog/gsed205b.zip
ftp://ftp.cdrom.com/pub/simtelnet/win95/prog/gsed205b.zip
GNU sed v1.03
modified by Frank Whaley.
This version was part of the "Virtually UN*X" toolset, hosted by
itribe.net; that website is now closed. Gsed v1.03 supported Win9x
long filenames, as well as hex, decimal, binary, and octal
character representations.
The Cygwin toolkit:
http://www.cygwin.com
Formerly know as "GNU-Win32 tools." According to their home page,
"The Cygwin tools are Win32 ports of the popular GNU development
tools for Windows NT, 95 and 98. They function through the use of
the Cygwin library which provides a UNIX-like API on top of the
Win32 API." The version of sed used is GNU sed v3.02.
Minimalist GNU for Windows (MinGW):
http://www.mingw.org
http://mingw.sourceforge.net
According to their home page, "MinGW ('Minimalist GNU for Windows')
refers to a set of runtime headers, used in building a compiler
system based on the GNU GCC and binutils projects. It compiles and
links code to be run on Win32 platforms ... MinGW uses Microsoft
runtime libraries, distributed with the Windows operating system."
The version of sed used is GNU sed v3.02.
sed v1.5 (a/k/a HHsed), by Howard Helman
Compiled with Mingw32 for 32-bit environments described above. This
version should support Win95 long filenames.
http://www.dbnet.ece.ntua.gr/~george/sed/OLD/sed15.exe
http://www.student.northpark.edu/pemente/sed/sed15exe.zip
2.2.1.4. MS-DOS
sed v1.6 (from HHsed), by Walter Briscoe
This is a forthcoming version, now in beta testing, but with many
new features. It corrects all the bugs in sed v1.5, and adds the
best features of sedmod v1.0 (below). It is available in 16-bit and
32-bit compiled versions for MS-DOS. Sorry, no URLs available yet.
sed v1.5 (a/k/a HHsed), by Howard Helman
uncompiled source code (Turbo C)
ftp://ftp.simtel.net/pub/simtelnet/msdos/txtutl/sed15.zip
ftp://ftp.cdrom.com/pub/simtelnet/msdos/txtutl/sed15.zip
DOS executable and documentation
ftp://ftp.simtel.net/pub/simtelnet/msdos/txtutl/sed15x.zip
ftp://ftp.cdrom.com/pub/simtelnet/msdos/txtutl/sed15x.zip
sedmod v1.0, by Hern Chen
http://www.ptug.org/sed/SEDMOD10.ZIP
http://www.student.northpark.edu/pemente/sed/sedmod10.zip
ftp://garbo.uwasa.fi/pc/unix/sedmod10.zip
GNU sed v3.02.80
See section 2.2.1.3 ("Microsoft Windows"), above.
GNU sed v2.05
Does not run under MS-DOS.
GNU sed v1.18
32-bit binaries and source, using DJGPP compiler. Requires 80386 SX
or better. Also requires 3 CWS*.EXE extenders on the path. See
section 5.5 ("What is CSDPMI*B.ZIP and why do I need it?"), below.
We recommend using a newer version of GNU sed.
http://www.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/sed118b.zip
ftp://ftp.cdrom.com/pub/simtelnet/gnu/djgpp/v2gnu/sed118b.zip
http://www.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/sed118s.zip
ftp://ftp.cdrom.com/pub/simtelnet/gnu/djgpp/v2gnu/sed118s.zip
GNU sed v1.06
16-bit binaries and source. Should run under any MS-DOS system.
http://www.simtel.net/pub/gnu/gnuish/sed106.zip
ftp://ftp.cdrom.com/pub/simtelnet/gnu/gnuish/sed106.zip
2.2.1.5. CP/M
ssed v2.2, by Chuck A. Forsberg
Written for CP/M, ssed (for "small/stupid stream editor) supports
only the a(ppend), c(hange), d(elete) and i(nsert) options, and
apparently doesn't support regular expressions. A -u switch will
"unsqueeze" compressed files and was used mainly in conjunction
with DIF.COM for source code maintenance. (file: ssed22.lbr)
change, by Michael M. Rubenstein
Rubenstein released a version of sed called CHANGE.COM (the
TTOOLS.LBR archive member CHANGE.CZM is a "crunched" file).
CHANGE.COM supports full RE's except grouping and backreferences,
and its only function is global substitution. (file: ttools.lbr)
2.2.1.6. Macintosh v8 or v9
Since sed is a command-line utility, it is not customary to think
of sed being used on a Mac. Nonetheless, the following instructions
from Aurelio Jargas describe the process for running sed on MacOS
version version 8 or 9.
(1) Download and install the Apple DiskCopy application
ftp://ftp.apple.com/developer/Development_Kits
(2) Download and install Apple MPW
ftp://ftp.apple.com/developer/Tool_Chest/Core_Mac_OS_Tools/MPW_etc./
(3) Download and expand Matthias Neeracher's GNU sed for MPW. (They
seem to have misnumbered the sed filename.)
ftp://sunsite.cnlab-switch.ch/software/platform/macos/src/mpw_c/sed-2.03.sit.bin
(4) Enter the sed-3.02 directory and doubleclick the 'sed' file
(5) MPW Shell will open up. It will be a command window instead of
a command line, but sed should work as expected. For example:
echo aa | sed 's/a/Z/g'<ENTER>
Note that ENTER is different from RETURN on an iMac. Apple *also*
has its own version of sed on MPW, called "StreamEdit", with a
syntax fairly similar to that of normal sed.
2.2.2. Shareware and Commercial versions
2.2.2.1. Unix platforms
[ Additional information needed. ]
2.2.2.2. OS/2
Hamilton Labs:
http://www.hamiltonlabs.com/cshell.htm
A sizable set of Unix/C shell utilities designed for OS/2. Price is
$350 in the US, $395 elsewhere, with FedEx shipping, unconditional
guarantee, unlimited support and free updates. A demo version of
the suite can be downloaded from this site, but a stand-alone copy
of sed is not available.
2.2.2.3. Windows 95/98, Windows NT, Windows 2000
Hamilton Labs:
http://www.hamiltonlabs.com/cshell.htm
A sizable set of Unix/C shell utilities designed for Win9x, WinNT,
and Win2K. Price is $350 in the US, $395 elsewhere, with FedEx
shipping, unconditional guarantee, unlimited support and free
updates. A demo version of the suite can be downloaded from this
site, but a stand-alone copy of sed is not available.
Interix:
http://www.interix.com
Interix (formerly known as OpenNT) is advertised as "a complete
UNIX system environment running natively on Microsoft Windows NT",
and is licensed and supported by Softway Systems. It offers over
200 Unix utilities, and supports Unix shells, sockets, networking,
and more. A single-user edition runs about $200. A free demo or
evaluation copy will run for 31 days and then quit; to continue
using it, you must purchase the commercial version.
MKS NuTCRACKER Professional
http://www.datafocus.com/products/nutc/
A different, yet related product line offered by MKS (Mortice Kern
Systems, below); the awkward spelling "NuTCRACKER" is intentional.
Various packages offer hundreds of Unix utilities for Win32
environments. Sed is not available as a separate product.
UnixDos:
http://www.unixdos.com
UnixDos is a suite of 82 Unix utilities ported over to the Windows
environments. There are 16-bit versions for Win3.x and 32-bit
versions for WinNT/Win95. It is distributed as uncrippled shareware
for the first 30 days. After the test period, the utilities will
not run and you must pay the registration fee of $50.
Their version of sed supports "\n" in the RHS of expressions, and
increases the length of input lines to 10,000 characters. By
special arrangement with the owners, persons who want a licensed
version of sed *only* (without the other utilities) may pay a
license fee of $10.
U/WIN:
http://www.research.att.com/sw/tools/uwin/
U/WIN is a suite of Unix utilities created for WinNT and Win95
systems. It is owned by AT&T, created by David Korn (author of the
Unix korn shell), and is freely distributed only to educational
institutions, AT&T employees, or certain researchers; all others
must pay a fee after a 90-day evaluation period expires. U/WIN
operates best with the NTFS (WinNT file system) but will run in
degraded mode with the FAT file system and in further degraded mode
under Win95. A minimal installation takes about 25 to 30 megs of
disk space. Sed is not available as a separate file for download,
but comes with the suite.
2.2.2.4. MS-DOS
Mix C/Utilities Toolchest
http://www.mixsoftware.com/product/utility.htm
According to their web page, "The C/Utilities Toolchest adds over
40 powerful UNIX utilities to your MS-DOS operating system. The
result is an environment very similar to UNIX operating systems,
yet 100% compatible with MS-DOS programs and commands." The
toolchest costs $19.95, with source code available for an
additional fee. Mix C's version of sed is not available separately.
MKS (Mortice Kern Systems) Toolkit
http://www.mks.com
Sed comes bundled with the MKS Toolkit, which is distributed only
as commercial software; it is not available separately.
Thompson Automation Software
http://www.tasoft.com
The Thompson Toolkit contains over 100 familiar Unix utilities,
including a version of the Unix Korn shell. It runs under MS-DOS,
OS/2, Win3.x, Win9x, and WinNT. Sed is one of the utilities, though
Thompson is better known for its version of awk for DOS, TAWK. The
toolkit runs about $150; sed is not available separately.
2.3. Where can I learn to use sed?
2.3.1. Books
_Sed & Awk, 2d edition_, by Dale Dougherty & Arnold Robbins
(Sebastopol, Calif: O'Reilly and Associates, 1997)
ISBN 1-56592-225-5
http://www.oreilly.com/catalog/sed2/noframes.html
About 40 percent of this book is devoted to sed, and maybe 50
percent is devoted to awk. The other 10 percent covers regexes and
concepts common to both tools. If you prefer hard copy, this is
definitely the best single place to learn to use sed, including its
advanced features.
The first edition is also very useful. Several typos crept into the
first printing of the first edition (though if you follow the
tutorials closely, you'll recognize them right away). A list of
errors from the first printing of _sed & awk_ is available at
<http://www.cs.colostate.edu/~dzubera/sedawk.txt>, and errors in
the 2nd are at <http://www.cs.colostate.edu/~dzubera/sedawk2.txt>,
though most of these were corrected in later printings. The second
edition tells how POSIX standards have affected these tools and
covers the popular GNU versions of sed and awk. Price is about (US)
$30.00
-----
_Mastering Regular Expressions, 2d ed.,_ by Jeffrey E. F. Friedl
(Sebastopol, Calif: O'Reilly and Associates, 2002)
ISBN 0-596-00289-0
http://regex.info
http://www.oreilly.com/catalog/regex2/
http://public.yahoo.com/~jfriedl/regex/ (for the first edition)
Knowing how to use "regular expressions" is essential to effective
use of most Unix tools. This book focuses on how regular
expressions can be best implemented in utilities such as perl, vi,
emacs, and awk, but also touches on sed as well. Friedl's home page
(above) gives links to other sites which help students learn to
master regular expressions. His site also gives a Perl script for
determining a syntactically valid e-mail address, using regexes:
http://public.yahoo.com/~jfriedl/regex/code.html
-----
_Awk und Sed_, by Helmut Herold.
(Bonn: Addison-Wesley, 1994; 288 pages)
2nd edition to be released in March 2003
ISBN 3-8273-2094-1
http://www.addison-wesley.de/main/main.asp?page=home/bookdetails&ProductID=37214
2.3.2. Mailing list
If you are interested in learning more about sed (its syntax, using
regular expressions, etc.) you are welcome to subscribe to a
sed-oriented mailing list. In fact, there are two mailing lists
about sed: one in English named "sed-users", moderated by Sven
Guckes; and one in Portuguese named "sed-BR" (for sed-Brazil),
moderated by Aurelio Marinho Jargas. The average volume of mail for
"sed-users" is about 35 messages a week; the average volume of mail
for "sed-BR" is about 15 messages a week.
sed-BR mailing list: http://br.groups.yahoo.com/group/sed-br/
sed-users mailing list: http://groups.yahoo.com/group/sed-users/
To subscribe to sed-users, send a blank message to:
sed-users-subscribe@yahoogroups.com
To unsubscribe from sed-users, send a blank message to:
sed-users-unsubscribe@yahoogroups.com
2.3.3. Tutorials, electronic text
The original users manual for sed, by Lee E. McMahon, from the
7th edition UNIX Manual (1978), with the classic "Kubla Khan"
example and tutorial, in formatted text format:
http://sed.sourceforge.net/grabbag/tutorials/sed_mcmahon.txt
The source code to the preceding manual. Use "troff -ms sed" to
print this file properly:
http://plan9.bell-labs.com/7thEdMan/vol2/sed
http://cm.bell-labs.com/7thEdMan/vol2/sed
"Do It With Sed", by Carlos Duarte
http://www.dbnet.ece.ntua.gr/~george/sed/OLD/sedtut_1.html
"Sed: How to use sed, a special editor for modifying files
automatically", by Bruce Barnett and General Electric Company
http://www.grymoire.com/Unix/Sed.html
U-SEDIT2.ZIP, by Mike Arst (16 June 1990)
ftp://ftp.cs.umu.se/pub/pc/u-sedit2.zip
ftp://ftp.uni-stuttgart.de/pub/systems/msdos/util/unixlike/u-sedit2.zip
ftp://sunsite.icm.edu.pl/vol/wojsyl/garbo/pc/editor/u-sedit2.zip
ftp://ftp.sogang.ac.kr/pub/msdos/garbo_pc/editor/u-sedit2.zip
U-SEDIT3.ZIP, by Mike Arst (24 Jan. 1992)
http://www.student.northpark.edu/pemente/sed/u-sedit3.zip
CompuServe DTPFORUM, "PC DTP Utilities" library, file SEDDOC.ZIP
Another sed FAQ
http://www.dreamwvr.com/sed-info/sed-faq.html
sed-tutorial, by Felix von Leitner
http://www.math.fu-berlin.de/~leitner/sed/tutorial.html
"Manipulating text with sed," chapter 14 of the SCO OpenServer
"Operating System Users Guide"
http://ou800doc.caldera.com/SHL_automate/CTOC-Manipulating_text_with_sed.html
"Combining the Bourne-shell, sed and awk in the UNIX environment
for language analysis," by Lothar Schmitt and Kiel Christianson.
This basic tutorial on the Bourne shell, sed and awk downloads as a
71-page PostScript file (compressed to 290K with gzip). You may
need to navigate down from the root to get the file.
ftp://ftp.u-aizu.ac.jp/u-aizu/doc/Tech-Report/1997/97-2-007.tar.gz
available upon request from Lothar Schmitt <lothar@u-aizu.ac.jp>
2.3.4. General web and ftp sites
http://sed.sourceforge.net/grabbag # Collected scripts
http://main.rtfiber.com.tw/~changyj/sed/ # Yao-Jen Chang
http://www.math.fu-berlin.de/~guckes/sed/ # Sven Guckes
http://www.math.fu-berlin.de/~leitner/sed/ # Felix von Leitner
http://www.dbnet.ece.ntua.gr/~george/sed/ # Yiorgos Adamopoulos
http://www.student.northpark.edu/pemente/sed/ # Eric Pement
http://spacsun.rice.edu/FAQ/sed.html
ftp://algos.inesc.pt/pub/users/cdua/scripts.tar.gz (sed and shell scripts)
"Handy One-Liners For Sed", compiled by Eric Pement. A large list
of 1-line sed commands which can be executed from the command line.
http://sed.sourceforge.net/sed1line.txt
http://www.student.northpark.edu/pemente/sed/sed1line.txt
"Handy One-Liners For Sed", translated to Portuguese
http://wmaker.lrv.ufsc.br/sed_ptBR.html
The Single UNIX Specification, Version 3 (technical man page)
http://www.opengroup.org/onlinepubs/007904975/utilities/sed.html
Getting started with sed
http://www.cs.hmc.edu/tech_docs/qref/sed.html
masm to gas converter
http://www.delorie.com/djgpp/faq/converting/asm2s-sed.html
mail2html.zip
http://www.crispen.org/src/#mail2html
sample uses of sed in batch files and scripts (Benny Pederson)
http://users.cybercity.dk/~bse26236/batutil/help/SED.HTM
dc.sed - the most complex and impressive sed script ever written.
This sed script by Greg Ubben emulates the Unix dc (desk
calculator), including base conversion, exponentiation, square
roots, and much more.
http://sed.sourceforge.net/grabbag/scripts/dc_overview.htm
If you should find other tutorials or scripts that should be added
to this document, please forward the URLs to the FAQ maintainer.
------------------------------
3. TECHNICAL
3.1. More detailed explanation of basic sed
Sed takes a script of editing commands and applies each command, in
order, to each line of input. After all the commands have been
applied to the first line of input, that line is output. A second
input line is taken for processing, and the cycle repeats. Sed
scripts can address a single line by line number or by matching a
/RE pattern/ on the line. An exclamation mark '!' after a regex
('/RE/!') or line number will select all lines that do NOT match
that address. Sed can also address a range of lines in the same
manner, using a comma to separate the 2 addresses.
$d # delete the last line of the file
/[0-9]\{3\}/p # print lines with 3 consecutive digits
5!s/ham/cheese/ # except on line 5, replace 'ham' with 'cheese'
/awk/!s/aaa/bb/ # unless 'awk' is found, replace 'aaa' with 'bb'
17,/foo/d # delete all lines from line 17 up to 'foo'
Following an address or address range, sed accepts curly braces
'{...}' so several commands may be applied to that line or to the
lines matched by the address range. On the command line, semicolons
';' separate each instruction and must precede the closing brace.
sed '/Owner:/{s/yours/mine/g;s/your/my/g;s/you/me/g;}' file
Range addresses operate differently depending on which version of
sed is used (see section 3.4, below). For further information on
using sed, consult the references in section 2.3, above.
3.1.1. Regular expressions on the left side of "s///"
All versions of sed support Basic Regular Expressions (BREs). For
the syntax of BREs, enter "man ed" at a Unix shell prompt. A
technical description of BREs from IEEE POSIX 1003.1-2001 and the
Single UNIX Specification Version 3 is available online at:
http://www.opengroup.org/onlinepubs/007904975/basedefs/xbd_chap09.html#tag_09_03
Sed normally supports BREs plus '\n' to match a newline in the
pattern space, plus '\xREx' as equivalent to '/RE/', where 'x' is any
character other than a newline or another backslash.
Some versions of sed support supersets of BREs, or "extended
regular expressions", which offer additional metacharacters for
increased flexibility. For additional information on extended REs
in GNU sed, see sections 3.7 ("GNU/POSIX extensions to regular
expressions") and 6.7.3 ("Special syntax in REs"), below.
Though not required by BREs, some versions of sed support \t to
represent a TAB, \r for carriage return, \xHH for direct entry of
hex codes, and so forth. Other versions of sed do not.
ssed (super-sed) introduced many new features for LHS pattern
matching, too many to give here. The complete list is found in
section 6.7.3.H ("ssed"), below.
3.1.2. Escape characters on the right side of "s///"
The right-hand side (the replacement part) in "s/find/replace/" is
almost always a string literal, with no interpolation of these
metacharacters:
. ^ $ [ ] { } ( ) ? + * |
Three things *are* interpolated: ampersand (&), backreferences, and
options for special seds. An ampersand on the RHS is replaced by
the entire expression matched on the LHS. There is _never_ any
reason to use grouping like this:
s/\(some-complex-regex\)/one two \1 three/
since you can do this instead:
s/some-complex-regex/one two & three/
To enter a literal ampersand on the RHS, type '\&'.
Grouping and backreferences: All versions of sed support grouping
and backreferences on the LHS and backreferences only on the RHS.
Grouping allows a series of characters to be collected in a set,
indicating the boundaries of the set with \( and \). Then the set
can be designated to be repeated a certain number of times
\(like this\)* or \(like this\)\{5,7\}.
Groups can also be nested "\(like \(this\) is here\)" and may
contain any valid RE. Backreferences repeat the contents of a
particular group, using a backslash and a digit (1-9) for each
corresponding group. In other words, "/\(pom\)\1/" is another way
of writing "/pompom/". If groups are nested, backreference numbers
are counted by matching \( in strict left to right order. Thus,
/..\(the \(word\)\) \("foo"\)../ is matched by the backreference
\3. Backreferences can be used in the LHS, the RHS, and in normal
RE addressing (see section 3.3). Thus,
/\(.\)\1\(.\)\2\(.\)\3/; # matches "bookkeeper"
/^\(.\)\(.\)\(.\)\3\2\1$/; # finds 6-letter palindromes
Seds differ in how they treat invalid backreferences where no
corresponding group occurs. To insert a literal ampersand or
backslash into the RHS, prefix it with a backslash: \& or \\.
ssed, sed16, and sedmod permit additional options on the RHS. They
all support changing part of the replacement string to upper case
(\u or \U), lower case (\l or \L), or to end case conversion (\E).
Both sed16 and sedmod support awk-style word references ($1, $2,
$3, ...) and $0 to insert the entire line before conversion.
echo ab ghi | sed16 "s/.*/$0 - \U$2/" # prints "ab ghi - GHI"
*Note:* This feature of sed16 and sedmod will break sed scripts which
put a dollar sign and digit into the RHS. Though this is an unlikely
combination, it's worth remembering if you use other people's scripts.
3.1.3. Substitution switches
Standard versions of sed support 4 main flags or switches which may
be added to the end of an "s///" command. They are:
N - Replace the Nth match of the pattern on the LHS, where
N is an integer between 1 and 512. If N is omitted,
the default is to replace the first match only.
g - Global replace of all matches to the pattern.
p - Print the results to stdout, even if -n switch is used.
w file - Write the pattern space to 'file' if a replacement was
done. If the file already exists when the script is
executed, it is overwritten. During script execution,
w appends to the file for each match.
GNU sed 3.02 and ssed also offer the /I switch for doing a
case-insensitive match. For example,
echo ONE TWO | gsed "s/one/unos/I" # prints "unos TWO"
GNU sed 4.x and ssed add the /M switch, to simplify working with
multi-line patterns: when it is used, ^ or $ will match BOL or EOL.
\` and \' remain available to match the start and end of pattern
space, respectively.
ssed supports two more switches, /S and /X, when its Perl mode is
used. They are described in detail in section 6.7.3.H, below.
3.1.4. Command-line switches
All versions of sed support two switches, -e and -n. Though sed
usually separates multiple commands with semicolons (e.g., "H;d;"),
certain commands could not accept a semicolon command separator.
These include :labels, 't', and 'b'. These commands had to occur
last in a script, separated by -e option switches. For example:
# The 'ta' means jump to label :a if last s/// returns true
sed -e :a -e '$!N;s/\n=/ /;ta' -e 'P;D' file
The -n switch turns off sed's default behavior of printing every
line. With -n, lines are printed only if explicitly told to. In
addition, for certain versions of sed, if an external script begins
with "#n" as its first two characters, the output is suppressed
(exactly as if -n had been entered on the command line). A list of
which versions appears in section 6.7.2., below.
GNU sed 4.x and ssed support additional switches. -l (lowercase L),
followed by a number, lets you adjust the default length of the 'l'
and 'L' commands (note that these implementations of sed also
support an argument to these commands, to tailor the length
separately of each occurrence of the command).
-i activates in-place editing (see section 4.41.1, below). -s
treats each file as a separate stream: sed by default joins all the
files, so $ represents the last line of the last file; 15 means the
15th line in the joined stream; and /abc/,/def/ might match across
files.
When -s is used, however all addresses refer to single files. For
example, $ represents the last line of each input file; 15 means
the 15th line of each input file; and /abc/,/def/ will be "reset"
(in other words, sed will not execute the commands and start
looking for /abc/ again) if a file ends before /def/ has been
matched. Note that -i automatically activates this interpretation
of addresses.
3.2. Common one-line sed scripts
A separate document of over 70 handy "one-line" sed commands is
available at
http://sed.sourceforge.net/sed1line.txt
Here are several common sed commands for one-line use. MS-DOS users
should replace single quotes ('...') with double quotes ("...") in
these examples. A specific filename usually follows the script,
though the input may also come via piping or redirection.
# Double space a file
sed G file
# Triple space a file
sed 'G;G' file
# Under UNIX: convert DOS newlines (CR/LF) to Unix format
sed 's/.$//' file # assumes that all lines end with CR/LF
sed 's/^M$// file # in bash/tcsh, press Ctrl-V then Ctrl-M
# Under DOS: convert Unix newlines (LF) to DOS format
sed 's/$//' file # method 1
sed -n p file # method 2
# Delete leading whitespace (spaces/tabs) from front of each line
# (this aligns all text flush left). '^t' represents a true tab
# character. Under bash or tcsh, press Ctrl-V then Ctrl-I.
sed 's/^[ ^t]*//' file
# Delete trailing whitespace (spaces/tabs) from end of each line
sed 's/[ ^t]*$//' file # see note on '^t', above
# Delete BOTH leading and trailing whitespace from each line
sed 's/^[ ^t]*//;s/[ ^]*$//' file # see note on '^t', above
# Substitute "foo" with "bar" on each line
sed 's/foo/bar/' file # replaces only 1st instance in a line
sed 's/foo/bar/4' file # replaces only 4th instance in a line
sed 's/foo/bar/g' file # replaces ALL instances within a line
# Substitute "foo" with "bar" ONLY for lines which contain "baz"
sed '/baz/s/foo/bar/g' file
# Delete all CONSECUTIVE blank lines from file except the first.
# This method also deletes all blank lines from top and end of file.
# (emulates "cat -s")
sed '/./,/^$/!d' file # this allows 0 blanks at top, 1 at EOF
sed '/^$/N;/\n$/D' file # this allows 1 blank at top, 0 at EOF
# Delete all leading blank lines at top of file (only).
sed '/./,$!d' file
# Delete all trailing blank lines at end of file (only).
sed -e :a -e '/^\n*$/{$d;N;};/\n$/ba' file
# If a line ends with a backslash, join the next line to it.
sed -e :a -e '/\\$/N; s/\\\n//; ta' file
# If a line begins with an equal sign, append it to the previous
# line (and replace the "=" with a single space).
sed -e :a -e '$!N;s/\n=/ /;ta' -e 'P;D' file
3.3. Addressing and address ranges
Sed commands may have an optional "address" or "address range"
prefix. If there is no address or address range given, then the
command is applied to all the lines of the input file or text
stream. Three commands cannot take an address prefix:
- labels, used to branch or jump within the script
- the close brace, '}', which ends the '{' "command"
- the '#' comment character, also technically a "command"
An address can be a line number (such as 1, 5, 37, etc.), a regular
expression (written in the form /RE/ or \xREx where 'x' is any
character other than '\' and RE is the regular expression), or the
dollar sign ($), representing the last line of the file. An
exclamation mark (!) after an address or address range will apply
the command to every line EXCEPT the ones named by the address. A
null regex ("//") will be replaced by the last regex which was
used. Also, some seds do not support \xREx as regex delimiters.
5d # delete line 5 only
5!d # delete every line except line 5
/RE/s/LHS/RHS/g # substitute only if RE occurs on the line
/^$/b label # if the line is blank, branch to ':label'
/./!b label # ... another way to write the same command
\%.%!b label # ... yet another way to write this command
$!N # on all lines but the last, get the Next line
Note that an embedded newline can be represented in an address by
the symbol \n, but this syntax is needed only if the script puts 2
or more lines into the pattern space via the N, G, or other
commands. The \n symbol does *not* match the newline at an
end-of-line because when sed reads each line into the pattern space
for processing, it strips off the trailing newline, processes the
line, and adds a newline back when printing the line to standard
output. To match the end-of-line, use the '$' metacharacter, as
follows:
/tape$/ # matches the word 'tape' at the end of a line
/tape$deck/ # matches the word 'tape$deck' with a literal '$'
/tape\ndeck/ # matches 'tape' and 'deck' with a newline between
The following sed commands usually accept *only* a single address.
All other commands (except labels, '}', and '#') accept both single
addresses and address ranges.
= print to stdout the line number of the current line
a after printing the current line, append "text" to stdout
i before printing the current line, insert "text" to stdout
q quit after the current line is matched
r file prints contents of "file" to stdout after line is matched
Note that we said "usually." If you need to apply the '=', 'a',
'i', or 'r' commands to each and every line within an address
range, this behavior can be coerced by the use of braces. Thus,
"1,9=" is an invalid command, but "1,9{=;}" will print each line
number followed by its line for the first 9 lines (and then print
the rest of the rest of the file normally).
Address ranges occur in the form
<address1>,<address2> or <address1>,<address2>!
where the address can be a line number or a standard /regex/.
<address2> can also be a dollar sign, indicating the end of file.
Under GNU sed 3.02+, ssed, and sed15+, <address2> may also be a
notation of the form +num, indicating the next _num_ lines after
<address1> is matched.
Address ranges are:
(1) Inclusive. The range "/From here/,/eternity/" matches all the
lines containing "From here" up to and including the line
containing "eternity". It will not stop on the line just prior to
"eternity". (If you don't like this, see section 4.24.)
(2) Plenary. They always match full lines, not just parts of lines.
In other words, a command to change or delete an address range will
change or delete whole lines; it won't stop in the middle of a
line.
(3) Multi-linear. Address ranges normally match 2 lines or more.
The second address will never match the same line the first address
did; therefore a valid address range always spans at least two
lines, with these exceptions which match only one line:
- if the first address matches the last line of the file
- if using the syntax "/RE/,3" and /RE/ occurs only once in the
file at line 3 or below
- if using HHsed v1.5. See section 3.4.
(4) Minimalist. In address ranges with /regex/ as <address2>, the
range "/foo/,/bar/" will stop at the first "bar" it finds, provided
that "bar" occurs on a line below "foo". If the word "bar" occurs
on several lines below the word "foo", the range will match all the
lines from the first "foo" up to the first "bar". It will not
continue hopping ahead to find more "bar"s. In other words, address
ranges are not "greedy," like regular expressions.
(5) Repeating. An address range will try to match more than one
block of lines in a file. However, the blocks cannot nest. In
addition, a second match will not "take" the last line of the
previous block. For example, given the following text,
start
stop start
stop
the sed command '/start/,/stop/d' will only delete the first two
lines. It will not delete all 3 lines.
(6) Relentless. If the address range finds a "start" match but
doesn't find a "stop", it will match every line from "start" to the
end of the file. Thus, beware of the following behaviors:
/RE1/,/RE2/ # If /RE2/ is not found, matches from /RE1/ to the
# end-of-file.
20,/RE/ # If /RE/ is not found, matches from line 20 to the
# end-of-file.
/RE/,30 # If /RE/ occurs any time after line 30, each
# occurrence will be matched in sed15+, sedmod, and
# GNU sed v3.02+. GNU sed v2.05 and 1.18 will match
# from the 2nd occurrence of /RE/ to the end-of-file.
If these behaviors seem strange, remember that they occur because
sed does not look "ahead" in the file. Doing so would stop sed from
being a stream editor and have adverse effects on its efficiency.
If these behaviors are undesirable, they can be circumvented or
corrected by the use of nested testing within braces. The following
scripts work under GNU sed 3.02:
# Execute your_commands on range "/RE1/,/RE2/", but if /RE2/ is
# not found, do nothing.
/RE1/{:a;N;/RE2/!ba;your_commands;}
# Execute your_commands on range "20,/RE/", but if /RE/ is not
# found, do nothing.
20{:a;N;/RE/!ba;your_commands;}
As a side note, once we've used N to "slurp" lines together to test
for the ending expression, the pattern space will have gathered
many lines (possibly thousands) together and concatenated them as a
single expression, with the \n sequence marking line breaks. The
REs *within* the pattern space may have to be modified (e.g., you
must write '/\nStart/' instead of '/^Start/' and '/[^\n]*/' instead
of '/.*/') and other standard sed commands will be unavailable or
difficult to use.
# Execute your_commands on range "/RE/,30", but if /RE/ occurs
# on line 31 or later, do not match it.
1,30{/RE/,$ your_commands;}
For related suggestions on using address ranges, see sections 4.2,
4.15, and 4.19 of this FAQ. Also, note the following section.
3.4. Address ranges in GNU sed and HHsed
(1) GNU sed 3.02+, ssed, and sed15+ all support address ranges like:
/regex/,+5
which match /regex/ plus the next 5 lines (or EOF, whichever comes
first).
(2) GNU sed v3.02.80 (and above) and ssed support address ranges of:
0,/regex/
as a special case to permit matching /regex/ if it occurs on the
first line. This syntax permits a range expression that matches
every line from the top of the file to the first instance of
/regex/, even if /regex/ is on the first line.
(3) HHsed (sed15) has an exceptional way of implementing
/regex1/,/regex2/
If /RE1/ and /RE2/ both occur on the *same* line, HHsed will match
that single line. In other words, an address range block can
consist of just one line. HHsed will then look for the next
occurrence of /regex1/ to begin the block again.
Every other version of sed (including sed16) requires 2 lines to
match an address range, and thus /regex1/ and /regex2/ cannot
successfully match just one line. See also the comments at
section 7.9.4, below.
(4) BEGIN~STEP selection: ssed and GNU sed (v2.05 and above) offer
a form of addressing called "BEGIN~STEP selection". This is *not* a
range address, which selects an inclusive block of consecutive
lines from /start/ to /finish/. But I think it seems to belong here.
Given an expression of the form "M~N", where M and N are integers,
GNU sed and ssed will select every Nth line, beginning at line M.
(With gsed v2.05, M had to be less than N, but this restriction is
no longer necessary). Both M and N may equal 0 ("0~0" selects every
line). These examples illustrate the syntax:
sed '1~3d' file # delete every 3d line, starting with line 1
# deletes lines 1, 4, 7, 10, 13, 16, ...
sed '0~3d' file # deletes lines 3, 6, 9, 12, 15, 18, ...
sed -n '2~5p' file # print every 5th line, starting with line 2
# prints lines 2, 7, 12, 17, 22, 27, ...
(5) Finally, GNU sed v2.05 has a bug in range addressing (see
section 7.5), which was fixed in the higher versions.
3.5. Debugging sed scripts
The following two debuggers should make it easier to understand how
sed scripts operate. They can save hours of grief when trying to
determine the problems with a sed script.
(1) sd (sed debugger), by Brian Hiles
This debugger runs under a Unix shell, is powerful, and is easy to
use. sd has conditional breakpoints and spypoints of the pattern
space and hold space, on any scope defined by regex match and/or
script line number. It can be semi-automated, can save diagnostic
reports, and shows potential problems with a sed script before it
tries to execute it. The script is robust and requires the Unix
shell utilities plus the Bourne shell or Korn shell to execute.
http://sed.sourceforge.net/grabbag/scripts/sd.ksh.txt (2003)
http://sed.sourceforge.net/grabbag/scripts/sd.sh.txt (1998)
(2) sedsed, by Aurelio Jargas
This debugger requires Python to run it, and it uses your own
version of sed, whatever that may be. It displays the current input
line, the pattern space, and the hold space, before and after each
sed command is executed.
http://sedsed.sourceforge.net
3.6. Notes about s2p, the sed-to-perl translator
s2p (sed to perl) is a Perl program to convert sed scripts into the
Perl programming language; it is included with many versions of
Perl. These problems have been found when using s2p:
(1) Doesn't recognize the semicolon properly after s/// commands.
s/foo/bar/g;
(2) Doesn't trim trailing whitespace after s/// commands. Even lone
trailing spaces, without comments, produce an error.
(3) Doesn't handle multiple commands within braces. E.g.,
1,4{=;G;}
will produce perl code with missing braces, and miss the second "G"
command as well. In fact, any commands after the first one are
missed in the perl output script, and the output perl script will
also contain mismatched braces.
3.7. GNU/POSIX extensions to regular expressions
GNU sed supports "character classes" in addition to regular
character sets, such as [0-9A-F]. Like regular character sets,
character classes represent any single character within a set.
"Character classes are a new feature introduced in the POSIX
standard. A character class is a special notation for describing
lists of characters that have a specific attribute, but where the
actual characters themselves can vary from country to country
and/or from character set to character set. For example, the notion
of what is an alphabetic character differs in the USA and in
France." [quoted from the docs for GNU awk v3.1.0.]
Though character classes don't generally conserve space on the
line, they help make scripts portable for international use. The
equivalent character sets _for U.S. users_ follows:
[[:alnum:]] - [A-Za-z0-9] Alphanumeric characters
[[:alpha:]] - [A-Za-z] Alphabetic characters
[[:blank:]] - [ \x09] Space or tab characters only
[[:cntrl:]] - [\x00-\x19\x7F] Control characters
[[:digit:]] - [0-9] Numeric characters
[[:graph:]] - [!-~] Printable and visible characters
[[:lower:]] - [a-z] Lower-case alphabetic characters
[[:print:]] - [ -~] Printable (non-Control) characters
[[:punct:]] - [!-/:-@[-`{-~] Punctuation characters
[[:space:]] - [ \t\v\f] All whitespace chars
[[:upper:]] - [A-Z] Upper-case alphabetic characters
[[:xdigit:]] - [0-9a-fA-F] Hexadecimal digit characters
Note that [[:graph:]] does not match the space " ", but [[:print:]]
does. Some character classes may (or may not) match characters in
the high ASCII range (ASCII 128-255 or 0x80-0xFF), depending on
which C library was used to compile sed. For non-English languages,
[[:alpha:]] and other classes may also match high ASCII characters.
------------------------------
4. EXAMPLES
ONE-CHARACTER QUESTIONS
4.1. How do I insert a newline into the RHS of a substitution?
Several versions of sed permit '\n' to be typed directly into the
RHS, which is then converted to a newline on output: ssed,
gsed302a+, gsed103 (with the -x switch), sed15+, sedmod, and
UnixDOS sed. The _easiest_ solution is to use one of these
versions.
For other versions of sed, try one of the following:
(a) If typing the sed script from a Bourne shell, use one backslash
"\" if the script uses 'single quotes' or two backslashes "\\" if
the script requires "double quotes". In the example below, note
that the leading '>' on the 2nd line is generated by the shell to
prompt the user for more input. The user types in slash,
single-quote, and then ENTER to terminate the command:
[sh-prompt]$ echo twolines | sed 's/two/& new\
>/'
two new
lines
[bash-prompt]$
(b) Use a script file with one backslash '\' in the script,
immediately followed by a newline. This will embed a newline into
the "replace" portion. Example:
sed -f newline.sed files
# newline.sed
s/twolines/two new\
lines/g
Some versions of sed may not need the trailing backslash. If so,
remove it.
(c) Insert an unused character and pipe the output through tr:
echo twolines | sed 's/two/& new=/' | tr "=" "\n" # produces
two new
lines
(d) Use the "G" command:
G appends a newline, plus the contents of the hold space to the end
of the pattern space. If the hold space is empty, a newline is
appended anyway. The newline is stored in the pattern space as "\n"
where it can be addressed by grouping "\(...\)" and moved in the
RHS. Thus, to change the "twolines" example used earlier, the
following script will work:
sed '/twolines/{G;s/\(two\)\(lines\)\(\n\)/\1\3\2/;}'
(e) Inserting full lines, not breaking lines up:
If one is not *changing* lines but only inserting complete lines
before or after a pattern, the procedure is much easier. Use the
"i" (insert) or "a" (append) command, making the alterations by an
external script. To insert "This line is new" BEFORE each line
matching a regex:
/RE/i This line is new # HHsed, sedmod, gsed 3.02a
/RE/{x;s/$/This line is new/;G;} # other seds
The two examples above are intended as "one-line" commands entered
from the console. If using a sed script, "i\" immediately followed
by a literal newline will work on all versions of sed. Furthermore,
the command "s/$/This line is new/" will only work if the hold
space is already empty (which it is by default).
To append "This line is new" AFTER each line matching a regex:
/RE/a This line is new # HHsed, sedmod, gsed 3.02a
/RE/{G;s/$/This line is new/;} # other seds
To append 2 blank lines after each line matching a regex:
/RE/{G;G;} # assumes the hold space is empty
To replace each line matching a regex with 5 blank lines:
/RE/{s/.*//;G;G;G;G;} # assumes the hold space is empty
(f) Use the "y///" command if possible:
On some Unix versions of sed (not GNU sed!), though the s///
command won't accept '\n' in the RHS, the y/// command does. If
your Unix sed supports it, a newline after "aaa" can be inserted
this way (which is not portable to GNU sed or other seds):
s/aaa/&~/; y/~/\n/; # assuming no other '~' is on the line!
4.2. How do I represent control-codes or nonprintable characters?
Several versions of sed support the notation \xHH, where "HH" are
two hex digits, 00-FF: ssed, GNU sed v3.02.80 and above, GNU sed
v1.03, sed16 and sed15 (HHsed). Try to use one of those versions.
Sed is not intended to process binary or object code, and files
which contain nulls (0x00) will usually generate errors in most
versions of sed. The latest versions of GNU sed and ssed are an
exception; they permit nulls in the input files and also in
regexes.
On Unix platforms, the 'echo' command may allow insertion of octal
or hex values, e.g., `echo "\0nnn"` or `echo -n "\0nnn"`. The echo
command may also support syntax like '\\b' or '\\t' for backspace
or tab characters. Check the man pages to see what syntax your
version of echo supports. Some versions support the following:
# replace 0x1A (32 octal) with ASCII letters
sed 's/'`echo "\032"`'/Ctrl-Z/g'
# note the 3 backslashes in the command below
sed "s/.`echo \\\b`//g"
4.3. How do I convert files with toggle characters, like +this+, to
look like [i]this[/i]?
Input files, especially message-oriented text files, often contain
toggle characters for emphasis, like ~this~, *this*, or =this=. Sed
can make the same input pattern produce alternating output each
time it is encountered. Typical needs might be to generate HMTL
codes or print codes for boldface, italic, or underscore. This
script accomodates multiple occurrences of the toggle pattern on
the same line, as well as cases where the pattern starts on one
line and finishes several lines later, even at the end of the file:
# sed script to convert +this+ to [i]this[/i]
:a
/+/{ x; # If "+" is found, switch hold and pattern space
/^ON/{ # If "ON" is in the (former) hold space, then ..
s///; # .. delete it
x; # .. switch hold space and pattern space back
s|+|[/i]|; # .. turn the next "+" into "[/i]"
ba; # .. jump back to label :a and start over
}
s/^/ON/; # Else, "ON" was not in the hold space; create it
x; # Switch hold space and pattern space
s|+|[i]|; # Turn the first "+" into "[i]"
ba; # Branch to label :a to find another pattern
}
#---end of script---
This script uses the hold space to create a "flag" to indicate
whether the toggle is ON or not. We have added remarks to
illustrate the script logic, but in most versions of sed remarks
are not permitted after 'b'ranch commands or labels.
If you are sure that the +toggle+ characters never cross line
boundaries (i.e., never begin on one line and end on another), this
script can be reduced to one line:
s|+\([^+][^+]*\)+|[i]\1[/i]|g
If your toggle pattern contains regex metacharacters (such as '*'
or perhaps '+' or '?'), remember to quote them with backslashes.
CHANGING STRINGS
4.10. How do I perform a case-insensitive search?
Several versions of sed support case-insensitive matching: ssed and
GNU sed v3.02+ (with I flag after s/// or /regex/); sedmod with the
-i switch; and sed16 (which supports both types of switches).
With other versions of sed, case-insensitive searching is awkward,
so people may use awk or perl instead, since these programs have
options for case-insensitive searches. In gawk/mawk, use "BEGIN
{IGNORECASE=1}" and in perl, "/regex/i". For other seds, here are
three solutions:
Solution 1: convert everything to upper case and search normally
# sed script, solution 1
h; # copy the original line to the hold space
# convert the pattern space to solid caps
y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/
# now we can search for the word "CARLOS"
/CARLOS/ {
# add or insert lines. Note: "s/.../.../" will not work
# here because we are searching a modified pattern
# space and are not printing the pattern space.
}
x; # get back the original pattern space
# the original pattern space will be printed
#---end of sed script---
Solution 2: search for both cases
Often, proper names will either start with all lower-case ("unix"),
with an initial capital letter ("Unix") or occur in solid caps
("UNIX"). There may be no need to search for every possibility.
/UNIX/b match
/[Uu]nix/b match
Solution 3: search for all possible cases
# If you must, search for any possible combination
/[Ca][Aa][Rr][Ll][Oo][Ss]/ { ... }
Bear in mind that as the pattern length increases, this solution
becomes an order of magnitude slower than the one of Solution 1, at
least with some implementations of sed.
4.11. How do I match only the first occurrence of a pattern?
(1) The general solution is to use GNU sed or ssed, with one of
these range expressions. The first script ("print only the first
match") works with any version of sed:
sed -n '/RE/{p;q;}' file # print only the first match
sed '0,/RE/{//d;}' file # delete only the first match
sed '0,/RE/s//to_that/' file # change only the first match
(2) If you cannot use GNU sed and if you *know* the pattern will
not occur on the first line, this will work:
sed '1,/RE/{//d;}' file # delete only the first match
sed '1,/RE/s//to_that/' file # change only the first match
(3) If you cannot use GNU sed and the pattern *might* occur on the
first line, use one of the following commands (credit for short GNU
script goes to Donald Bruce Stewart):
sed '/RE/{x;/Y/!{s/^/Y/;h;d;};x;}' file # delete (one way)
sed -e '/RE/{d;:a' -e '$!N;$ba' -e '}' file # delete (another way)
sed '/RE/{d;:a;N;$ba;}' file # same script, GNU sed
sed -e '/RE/{s//to_that/;:a' -e '$!N;$!ba' -e '}' file # change
Still another solution, using a flag in the hold space. This is
portable to all seds and works if the pattern is on the first line:
# sed script to change "foo" to "bar" only on the first occurrence
1{x;s/^/first/;x;}
1,/foo/{x;/first/s///;x;s/foo/bar/;}
#---end of script---
4.12. How do I parse a comma-delimited (CSV) data file?
Comma-delimited data files can come in several forms, requiring
increasing levels of complexity in parsing and handling. They are
often referred to as CSV files (for "comma separated values") and
occasionally as SDF files (for "standard data format"). Note that
some vendors use "SDF" to refer to variable-length records with
comma-separated fields which are "double-quoted" if they contain
character values, while other vendors use "SDF" to designate
fixed-length records with fixed-length, nonquoted fields! (For help
with fixed-length fields, see question 4.23)
The term "CSV" became a de-facto standard when Microsoft Excel used
it as an optional output file format.
Here are 4 different forms you may encounter in comma-delimited data:
(a) No quotes, no internal commas
1001,John Smith,PO Box 123,Chicago,IL,60699
1002,Mary Jones,320 Main,Denver,CO,84100,
(b) Like (a), with quotes around each field
"1003","John Smith","PO Box 123","Chicago","IL","60699"
"1004","Mary Jones","320 Main","Denver","CO","84100"
(c) Like (b), with embedded commas
"1005","Tom Hall, Jr.","61 Ash Ct.","Niles","OH","44446"
"1006","Bob Davis","429 Pine, Apt. 5","Boston","MA","02128"
(d) Like (c), with embedded commas and quotes
"1007","Sue "Red" Smith","19 Main","Troy","MI","48055"
"1008","Joe "Hey, guy!" Hall","POB 44","Reno","NV","89504"
In each example above, we have 7 fields and 6 commas which function
as field separators. Case (c) is a very typical form of these data
files, with double quotes used to enclose each field and to protect
internal commas (such as "Tom Hall, Jr.") from interpretation as
field separators. However, many times the data may include both
embedded quotation marks as well as embedded commas, as seen by
case (d), above.
Case (d) is the closest to Microsoft CSV format. *However*, the
Microsoft CSV format allows embedded newlines within a
double-quoted field. If embedded newlines within fields are a
possibility for your data, you should consider using something
other than sed to work with the data file.
Before handling a comma-delimited data file, make sure that you
fully understand its format and check the integrity of the data.
Does each line contain the same number of fields? Should certain
fields be composed only of numbers or of two-letter state
abbreviations in all caps? Sed (or awk or perl) should be used to
validate the integrity of the data file before you attempt to alter
it or extract particular fields from the file.
After ensuring that each line has a valid number of fields, use sed
to locate and modify individual fields, using the \(...\) grouping
command where needed.
In case (a):
sed 's/^[^,]*,[^,]*,[^,]*,[^,]*,/.../'
^ ^ ^
| | |_ 3rd field
| |_______ 2nd field
|_____________ 1st field
# Unix script to delete the second field for case (a)
sed 's/^\([^,]*\),[^,]*,/\1,,/' file
# Unix script to change field 1 to 9999 for case (a)
sed 's/^[^,]*,/9999,/' file
In cases (b) and (c):
sed 's/^"[^"]*","[^"]*","[^"]*","[^"]*",/.../'
1st-- 2nd-- 3rd-- 4th--
# Unix script to delete the second field for case (c)
sed 's/^\("[^"]*"\),"[^"]*",/\1,"",/' file
# Unix script to change field 1 to 9999 for case (c)
sed 's/^"[^"]*",/"9999",/' file
In case (d):
One way to parse such files is to replace the 3-character field
separator "," with an unused character like the tab or vertical
bar. (Technically, the field separator is only the comma while the
fields are surrounded by "double quotes", but the net _effect_ is
that fields are separated by quote-comma-quote, with quote
characters added to the beginning and end of each record.) Search
your datafile _first_ to make sure that your character appears
nowhere in it!
sed -n '/|/p' file # search for any instance of '|'
# if it's not found, we can use the '|' to separate fields
Then replace the 3-character field separator and parse as before:
# sed script to delete the second field for case (d)
s/","/|/g; # global change of "," to bar
s/^\([^|]*\)|[^|]|/\1||/; # delete 2nd field
s/|/","/g; # global change of bar back to ","
#---end of script---
# sed script to change field 1 to 9999 for case (d)
# Remember to accommodate leading and trailing quote marks
s/","/|/g;
s/^[^|]*|/"9999|/;
s/|/","/g;
#---end of script---
Note that this technique works only if _each_ and _every_ field is
surrounded with double quotes, including empty fields.
The following solution is for more complex examples of (d), such
as: not all fields contain "double-quote" marks, or the presence of
embedded "double-quote" marks within fields, or extraneous
whitespace around field delimiters. (Thanks to Greg Ubben for this
script!)
# sed script to convert case (d) to bar-delimited records
s/^ *\(.*[^ ]\) *$/|\1|/;
s/" *, */"|/g;
: loop
s/| *\([^",|][^,|]*\) *, */|\1|/g;
s/| *, */|\1|/g;
t loop
s/ *|/|/g;
s/| */|/g;
s/^|\(.*\)|$/\1/;
#---end of script---
For example, it turns this (which is badly-formed but legal):
first,"",unquoted ,""this" is, quoted " ,, sub "quote" inside, f", lone " empty:
into this:
first|""|unquoted|""this" is, quoted "||sub "quote" inside|f"|lone " empty:
Note that the script preserves the "double-quote" marks, but
changes only the commas where they are used as field separators. I
have used the vertical bar "|" because it's easier to read, but you
may change this to another field separator if you wish.
If your CSV datafile is more complex, it would probably not be
worth the effort to write it in sed. For such a case, you should
use Perl with a dedicated CSV module (there are at least two recent
CSV parsers available from CPAN).
4.13. How do I handle fixed-length, columnar data?
Sed handles fixed-length fields via \(grouping\) and backreferences
(\1, \2, \3 ...). If we have 3 fields of 10, 25, and 9 characters
per field, our sed script might look like so:
s/^\(.\{10\}\)\(.\{25\}\)\(.\{9\}\)/\3\2\1/; # Change the fields
^^^^^^^^^^^~~~~~~~~~~~========== # from 1,2,3 to 3,2,1
field #1 field #2 field #3
This is a bit hard to read. By using GNU sed or ssed with the -r
switch active, it can look like this:
s/^(.{10})(.{25})(.{9})/\3\2\1/; # Using the -r switch
To delete a field in sed, use grouping and omit the backreference
from the field to be deleted. If the data is long or difficult to
work with, use ssed with the -R switch and the /x flag after an s///
command, to insert comments and remarks about the fields.
For records with many fields, use GNU awk with the FIELDWIDTHS
variable set in the top of the script. For example:
awk 'BEGIN{FIELDWIDTHS = "10 25 9"}; {print $3 $2 $1}' file
This is much easier to read than a similar sed script, especially
if there are more than 5 or 6 fields to manipulate.
4.14. How do I commify a string of numbers?
Use the simplest script necessary to accomplish your task. As
variations of the line increase, the sed script must become more
complex to handle additional conditions. Whole numbers are
simplest, followed by decimal formats, followed by embedded words.
Case 1: simple strings of whole numbers separated by spaces or
commas, with an optional negative sign. To convert this:
4381, -1222333, and 70000: - 44555666 1234567890 words
56890 -234567, and 89222 -999777 345888777666 chars
to this:
4,381, -1,222,333, and 70,000: - 44,555,666 1,234,567,890 words
56,890 -234,567, and 89,222 -999,777 345,888,777,666 chars
use one of these one-liners:
sed ':a;s/\B[0-9]\{3\}\>/,&/;ta' # GNU sed
sed -e :a -e 's/\(.*[0-9]\)\([0-9]\{3\}\)/\1,\2/;ta' # other seds
Case 2: strings of numbers which may have an embedded decimal
point, separated by spaces or commas, with an optional negative
sign. To change this:
4381, -6555.1212 and 70000, 7.18281828 44906982.071902
56890 -2345.7778 and 8.0000: -49000000 -1234567.89012
to this:
4,381, -6,555.1212 and 70,000, 7.18281828 44,906,982.071902
56,890 -2,345.7778 and 8.0000: -49,000,000 -1,234,567.89012
use the following command for GNU sed:
sed ':a;s/\(^\|[^0-9.]\)\([0-9]\+\)\([0-9]\{3\}\)/\1\2,\3/g;ta'
and for other versions of sed:
sed -f case2.sed files
# case2.sed
s/^/ /; # add space to start of line
:a
s/\( [-0-9]\{1,\}\)\([0-9]\{3\}\)/\1,\2/g
ta
s/ //; # remove space from start of line
#---end of script---
4.15. How do I prevent regex expansion on substitutions?
Sometimes you want to *match* regular expression metacharacters as
literals (e.g., you want to match "[0-9]" or "\n"), to be replaced
with something else. The ordinary way to prevent expanding
metacharacters is to prefix them with a backslash. Thus, if "\n"
matches a newline, "\\n" will match the two-character string of
'backslash' followed by 'n'.
But doing this repeatedly can become tedious if there are many
regexes. The following script will replace alternating strings of
literals, where no character is interpreted as a regex
metacharacter:
# filename: sub_quote.sed
# author: Paolo Bonzini
# sed script to add backslash to find/replace metacharacters
N; # add even numbered line to pattern space
s,[]/\\$*[],\\&,g; # quote all of [, ], /, \, $, or *
s,^,s/,; # prepend "s/" to front of pattern space
s,$,/,; # append "/" to end of pattern space
s,\n,/,; # change "\n" to "/", making s/from/to/
#---end of script---
Here's a sample of how sub_quote.sed might be used. This example
converts typical sed regexes to perl-style regexes. The input file
consists of 10 lines:
[0-9]
\d
[^0-9]
\D
\+
+
\?
?
\|
|
Run the command "sed -f sub_quote.sed input", to transform the
input file (above) to 5 lines of output:
s/\[0-9\]/\\d/
s/\[^0-9\]/\\D/
s/\\+/+/
s/\\?/?/
s/\\|/|/
The above file is itself a sed script, which can then be used to
modify other files.
4.16. How do I convert a string to all lowercase or capital letters?
The easiest method is to use a new version of GNU sed, ssed, sedmod
or sed16 and employ the \U, \L, or other switches on the right side
of an s/// command. For example, to convert any word which begins
with "reg" or "exp" into solid capital letters:
sed -r "s/\<(reg|exp)[a-z]+/\U&/g" # gsed4.+ or ssed
sed "s/\<reg[a-z]+/\U&/g; s/\<exp[a-z]+/\U&/g" # sed16 and sedmod
As you can see, sedmod and sed16 do not support alternation (|),
but they do support case conversion. If none of these versions of
sed are available to you, some sample scripts for this task are
available from the Seder's Grab Bag:
http://sed.sourceforge.net/grabbag/scripts
Note that some case conversion scripts are listed under "Filename
manipulation" and others are under "Text formatting."
CHANGING BLOCKS (consecutive lines)
4.20. How do I change only one section of a file?
You can match a range of lines by line number, by regexes (say, all
lines between the words "from" and "until"), or by a combination of
the two. For multiple substitutions on the same range, put the
command(s) between braces {...}. For example:
# replace only between lines 1 and 20
1,20 s/Johnson/White/g
# replace everywhere EXCEPT between lines 1 and 20
1,20 !s/Johnson/White/g
# replace only between words "from" and "until". Note the
# use of \<....\> as word boundary markers in GNU sed.
/from/,/until/ { s/\<red\>/magenta/g; s/\<blue\>/cyan/g; }
# replace only from the words "ENDNOTES:" to the end of file
/ENDNOTES:/,$ { s/Schaff/Herzog/g; s/Kraft/Ebbing/g; }
For technical details on using address ranges, see section 3.3
("Addressing and Address ranges").
4.21. How do I delete or change a block of text if the block contains
a certain regular expression?
The following deletes the block between 'start' and 'end'
inclusively, if and only if the block contains the string
'regex'. Written by Russell Davies, with additional comments:
# sed script to delete a block if /regex/ matches inside it
:t
/start/,/end/ { # For each line between these block markers..
/end/!{ # If we are not at the /end/ marker
$!{ # nor the last line of the file,
N; # add the Next line to the pattern space
bt
} # and branch (loop back) to the :t label.
} # This line matches the /end/ marker.
/regex/d; # If /regex/ matches, delete the block.
} # Otherwise, the block will be printed.
#---end of script---
Note: When the script above reaches /regex/, the entire multi-line
block is in the pattern space. To replace items inside the block,
use "s///". To change the entire block, use the 'c' (change)
command:
/regex/c\
1: This will replace the entire block\
2: with these two lines of text.
4.22. How do I locate a paragraph of text if the paragraph contains a
certain regular expression?
Assume that paragraphs are separated by blank lines. For regexes
that are single terms, use one of the following scripts:
sed -e '/./{H;$!d;}' -e 'x;/regex/!d' # most seds
sed '/./{H;$!d;};x;/regex/!d' # GNU sed
To print paragraphs only if they contain 3 specific regular
expressions (RE1, RE2, and RE3), in any order in the paragraph:
sed -e '/./{H;$!d;}' -e 'x;/RE1/!d;/RE2/!d;/RE3/!d'
With this solution and the preceding one, if the paragraphs are
excessively long (more than 4k in length), you may overflow sed's
internal buffers. If using HHsed, you must add a "G;" command
immediately after the "x;" in the scripts above to defeat a bug
in HHsed (see section 7.9(5), below, for a description).
4.23. How do I match a block of _specific_ consecutive lines?
There are three ways to approach this problem:
(1) Try to use a "/range/, /expression/"
(2) Try to use a "/multi-line\nexpression/"
(3) Try to use a block of "literal strings"
We describe each approach in the following sections.
4.23.1. Try to use a "/range/, /expression/"
If the block of lines are strings that *never change their order*
and if the top line never occurs outside the block, like this:
Abel
Baker
Charlie
Delta
then these solutions will work for deleting the block:
sed 's/^Abel$/{N;N;N;d;}' files # for blocks with few lines
sed '/^Abel$/, /^Zebra$/d' files # for blocks with many lines
sed '/^Abel$/,+25d' files # HHsed, sedmod, ssed, gsed 3.02.80
To change the block, use the 'c' (change) command instead of 'd'.
To print that block only, use the -n switch and 'p' (print) instead
of 'd'. To change some things inside the block, try this:
/^Abel$/,/^Delta$/ {
:ack
N;
/\nDelta$/! b ack
# At this point, all the lines in the block are collected
s/ubstitute /somethin/g;
}
4.23.2. Try to use a "multi-line\nexpression"
If the top line of the block sometimes appears alone or is
sometimes followed by other lines, or if a partial block may occur
somewhere in the file, a multi-line expression may be required.
In these examples, we give solutions for matching an N-line block.
The expression "/^RE1\nRE2\nRE3...$/" represents a properly formed
regular expression where \n indicates a newline between lines. Note
that the 'N' followed by the 'P;D;' commands forms a "sliding
window" technique. A window of N lines is formed. If the multi-line
pattern matches, the block is handled. If not, the top line is
printed and then deleted from the pattern space, and we try to
match at the next line.
# sed script to delete 2 consecutive lines: /^RE1\nRE2$/
$b
/^RE1$/ {
$!N
/^RE1\nRE2$/d
P;D
}
#---end of script---
# sed script to delete 3 consecutive lines. (This script
# fails under GNU sed v2.05 and earlier because of the 't'
# bug when s///n is used; see section 7.5(1) of the FAQ.)
: more
$!N
s/\n/&/2;
t enough
$!b more
: enough
/^RE1\nRE2\nRE3$/d
P;D
#---end of script---
For example, to delete a block of 5 consecutive lines, the previous
script must be altered in only two places:
(1) Change the 2 in "s/\n/&/2;" to a 4 (the trailing semicolon is
needed to work around a bug in HHsed v1.5).
(2) Change the regex line to "/^RE1\nRE2\nRE3\nRE4\nRE5$/d",
modifying the expression as needed.
Suppose we want to delete a block of two blank lines followed by
the word "foo" followed by another blank line (4 lines in all).
Other blank lines and other instances of "foo" should be left
alone. After changing the '2' to a '3' (always one number less than
the total number of lines), the regex line would look like this:
"/^\n\nfoo\n$/d". (Thanks to Greg Ubben for this script.)
As an alternative to work around the 't' bug in older versions of
GNU sed, the following script will delete 4 consecutive lines:
# sed script to delete 4 consecutive lines. Use this if you
# require GNU sed 2.05 and below.
/^RE1$/!b
$!N
$!N
:a
$b
N
/^RE1\nRE2\nRE3\nRE4$/d
P
s/^.*\n\(.*\n.*\n.*\)$/\1/
ba
#---end of script---
Its drawback is that it must be modified in 3 places instead of 2
to adapt it for more lines, and as additional lines are added, the
's' command is forced to work harder to match the regexes. On the
other hand, it avoids a bug with gsed-2.05 and illustrates another
way to solve the problem of deleting consecutive lines.
4.23.3. Try to use a block of "literal strings"
If you need to match a static block of text (which may occur any
number of times throughout a file), where the contents of the block
are known in advance, then this script is easy to use. It requires
an intermediate file, which we will call "findrep.txt" (below):
A block of several consecutive lines to
be matched literally should be placed on
top. Regular expressions like .* or [a-z]
will lose their special meaning and be
interpreted literally in this block.
----
Four hyphens separate the two sections. Put
the replacement text in the lower section.
As above, sed symbols like &, \n, or \1 will
lose their special meaning.
This is a 3-step process. A generic script called "blockrep.sed"
will read "findrep.txt" (above) and generate a custom script, which
is then used on the actual input file. In other words,
"findrep.txt" is a simplified description of the editing that you
want to do on the block, and "blockrep.sed" turns it into actual
sed commands.
Use this process from a Unix shell or from a DOS prompt:
sed -nf blockrep.sed findrep.txt >custom.sed
sed -f custom.sed input.file >output.file
erase custom.sed
The generic script "blockrep.sed" follows below. It's fairly long.
Examining its output might help you understanding how to use the
_sliding window_ technique.
# filename: blockrep.sed
# author: Paolo Bonzini
# Requires:
# (1) blocks to find and replace, e.g., findrep.txt
# (2) an input file to be changed, input.file
#
# blockrep.sed creates a second sed script, custom.sed,
# to find the lines above the row of 4 hyphens, globally
# replacing them with the lower block of text. GNU sed
# is recommended but not required for this script.
#
# Loop on the first part, accumulating the `from' text
# into the hold space.
:a
/^----$/! {
# Escape slashes, backslashes, the final newline and
# regular expression metacharacters.
s,[/\[.*],\\&,g
s/$/\\/
H
#
# Append N cmds needed to maintain the sliding window.
x
1 s,^.,s/,
1! s/^/N\
/
x
n
ba
}
#
# Change the final backslash to a slash to separate the
# two sides of the s command.
x
s,\\$,/,
x
#
# Until EOF, gather the substitution into hold space.
:b
n
s,[/\],\\&,g
$! s/$/\\/
H
$! bb
#
# Start the RHS of the s command without a leading
# newline, add the P/D pair for the sliding window, and
# print the script.
g
s,/\n,/,
s,$,/\
P\
D,p
#---end of script---
4.24. How do I address all the lines between RE1 and RE2, excluding the
lines themselves?
Normally, to address the lines between two regular expressions, RE1
and RE2, one would do this: '/RE1/,/RE2/{commands;}'. Excluding
those lines takes an extra step. To put 2 arrows before each line
between RE1 and RE2, except for those lines:
sed '1,/RE1/!{ /RE2/,/RE1/!s/^/>>/; }' input.fil
The preceding script, though short, may be difficult to follow. It
also requires that /RE1/ cannot occur on the first line of the
input file. The following script, though it's not a one-liner, is
easier to read and it permits /RE1/ to appear on the first line:
# sed script to replace all lines between /RE1/ and /RE2/,
# without matching /RE1/ or /RE2/
/RE1/,/RE2/{
/RE1/b
/RE2/b
s/^/>>/
}
#---end of script---
Contents of input.fil: Output of sed script:
aaa aaa
bbb bbb
RE1 RE1
aaa >>aaa
bbb >>bbb
ccc >>ccc
RE2 RE2
end end
4.25. How do I join two lines if line #1 ends in a [certain string]?
This question appears in the section on one-line sed scripts, but
it comes up so many times that it needs a place here also. Suppose
a line ends with a particular string (often, a line ends with a
backslash). How do you bring up the second line after it, even in
cases where several consecutive lines all end in a backslash?
sed -e :a -e '/\\$/N; s/\\\n//; ta' file # all seds
sed ':a; /\\$/N; s/\\\n//; ta' file # GNU sed, ssed, HHsed
Note that this replaces the backslash-newline with nothing. You may
want to replace the backslash-newline with a single space instead.
4.26. How do I join two lines if line #2 begins in a [certain string]?
The inverse situation is another FAQ. Suppose a line begins with a
particular string. How do you bring that line up to follow the
previous line? In this example, we want to match the string "<<="
at the beginning of one line, bring that line up to the end of the
line before it, and replace the string with a single space:
sed -e :a -e '$!N;s/\n<<=/ /;ta' -e 'P;D' file # all seds
sed ':a; $!N;s/\n<<=/ /;ta;P;D' file # GNU, ssed, sed15+
4.27. How do I change all paragraphs to long lines?
A frequent request is how to convert DOS-style textfiles, in which
each line ends with "paragraph marker", to Microsoft-style
textfiles, in which the "paragraph" marker only appears at the end
of real paragraphs. Sometimes this question is framed as, "How do I
remove the hard returns at the end of each line in a paragraph?"
The problem occurs because newer word processors don't work the
same way older text editors did. Older text editors used a newline
(CR/LF in DOS; LF alone in Unix) to end each line on screen or on
disk, and used two newlines to separate paragraphs. Certain word
processors wanted to make paragraph reformatting and reflowing work
easily, so they use one newline to end a paragraph and never allow
newlines _within_ a paragraph. This means that textfiles created
with standard editors (Emacs, vi, Vedit, Boxer, etc.) appear to
have "hard returns" at inappropriate places. The following sed
script finds blocks of consecutive nonblank lines (i.e., paragraphs
of text), and converts each block into one long line with one "hard
return" at the end.
# sed script to change all paragraphs to long lines
/./{H; $!d;} # Put each paragraph into hold space
x; # Swap hold space and pattern space
s/^\(\n\)\(..*\)$/\2\1/; # Move leading \n to end of PatSpace
s/\n\(.\)/ \1/g; # Replace all other \n with 1 space
# Uncomment the following line to remove excess blank lines:
# /./!d;
#---end of sed script---
If the input files have formatting or indentation that conveys
special meaning (like program source code), this script will remove
it. But if the text still needs to be extended, try 'par'
(paragraph reformatter) or the 'fmt' utility with the -t or -c
switches and the width option (-w) set to a number like 9999.
SHELL AND ENVIRONMENT
4.30. How do I read environment variables with sed?
4.30.1. - on Unix platforms
In Unix, environment variables begin with a dollar sign, such as
$TERM, $PATH, $var or $i. In sed, the dollar sign is used to
indicate the last line of the input file, the end of a line (in the
LHS), or a literal symbol (in the RHS). Sed cannot access variables
directly, so one must pay attention to shell quoting requirements
to expand the variables properly.
To ALLOW the Unix shell to interpret the dollar sign, put the
script in double quotes:
sed "s/_terminal-type_/$TERM/g" input.file >output.file
To PREVENT the Unix shell from interpreting the dollar sign as a
shell variable, put the script in single quotes:
sed 's/.$//' infile >outfile
To use BOTH Unix $environment_vars and sed /end-of-line$/ pattern
matching, there are two solutions. (1) The easiest is to enclose
the script in "double quotes" so the shell can see the $variables,
and to prefix the sed metacharacter ($) with a backslash. Thus, in
sed "s/$user\$/root/" file
the shell interpolates $user and sed interprets \$ as the symbol
for end-of-line.
(2) Another method--somewhat less readable--is to concatenate the
script with 'single quotes' where the $ should not be interpolated
and "double quotes" where variable interpolation should occur. To
demonstrate using the preceding script:
sed "s/$user"'$/root/' file
Solution #1 seems easier to remember. In either case, we search for
the user's name (stored in a variable called $user) when it occurs
at the end of the line ($), and substitute the word "root" in all
matches.
For longer shell scripts, it is sometimes useful to begin with
single quote marks ('), close them upon encountering the variable,
enclose the variable name in double quotes ("), and resume with
single quotes, closing them at the end of the sed script. Example:
#! /bin/sh
# sed script to illustrate 'quote'"matching"'usage'
FROM='abcdefgh'
TO='ABCDEFGH'
sed -e '
y/'"$FROM"'/'"$TO"'/; # note the quote pairing
# some more commands go here . . .
# last line is a single quote mark
'
Thus, each variable named $FROM is replaced by $TO, and the single
quotes are used to glue the multiple lines together in the script.
(See also section 4.10, "How do I handle shell quoting in sed?")
4.30.2. - on MS-DOS and 4DOS platforms
Under 4DOS and MS-DOS version 7.0 (Win95) or 7.10 (Win95 OSR2),
environment variables can be accessed from the command prompt.
Under MS-DOS v6.22 and below, environment variables can only be
accessed from within batch files. Environment variables should be
enclosed between percent signs and are case-insensitive; i.e.,
%USER% or %user% will display the USER variable. To generate a true
percent sign, just enter it twice.
DOS versions of sed require that sed scripts be enclosed by double
quote marks "..." (not single quotes!) if the script contains
embedded tabs, spaces, redirection arrows or the vertical bar. In
fact, if the input for sed comes from piping, a sed script should
not contain a vertical bar, even if it is protected by double
quotes (this seems to be bug in the normal MS-DOS syntax). Thus,
echo blurk | sed "s/^/ |foo /" # will cause an error
sed "s/^/ |foo /" blurk.txt # will work as expected
Using DOS environment variables which contain DOS path statements
(such as a TMP variable set to "C:\TEMP") within sed scripts is
discouraged because sed will interpret the backslash '\' as a
metacharacter to "quote" the next character, not as a normal
symbol. Thus,
sed "s/^/%TMP% /" somefile.txt
will not prefix each line with (say) "C:\TEMP ", but will prefix
each line with "C:TEMP "; sed will discard the backslash, which is
probably not what you want. Other variables such as %PATH% and
%COMSPEC% will also lose the backslash within sed scripts.
Environment variables which do not use backslashes are usually
workable. Thus, all the following should work without difficulty,
if they are invoked from within DOS batch files:
sed "s/=username=/%USER%/g" somefile.txt
echo %FILENAME% | sed "s/\.TXT/.BAK/"
grep -Ei "%string%" somefile.txt | sed "s/^/ /"
while from either the DOS prompt or from within a batch file,
sed "s/%%/ percent/g" input.fil >output.fil
will replace each percent symbol in a file with " percent" (adding
the leading space for readability).
4.31. How do I export or pass variables back into the environment?
4.31.1. - on Unix platforms
Suppose that line #1, word #2 of the file 'terminals' contains a
value to be put in your TERM environment variable. Sed cannot
export variables directly to the shell, but it can pass strings to
shell commands. To set a variable in the Bourne shell:
TERM=`sed 's/^[^ ][^ ]* \([^ ][^ ]*\).*/\1/;q' terminals`;
export TERM
If the second word were "Wyse50", this would send the shell command
"TERM=Wyse50".
4.31.2. - on MS-DOS or 4DOS platforms
Sed cannot directly manipulate the environment. Under DOS, only
batch files (.BAT) can do this, using the SET instruction, since
they are run directly by the command shell. Under 4DOS, special
4DOS commands (such as ESET) can also alter the environment.
Under DOS or 4DOS, sed can select a word and pass it to the SET
command. Suppose you want the 1st word of the 2nd line of MY.DAT
put into an environment variable named %PHONE%. You might do this:
@echo off
sed -n "2 s/^\([^ ][^ ]*\) .*/SET PHONE=\1/p;3q" MY.DAT > GO_.BAT
call GO_.BAT
echo The environment variable for PHONE is %PHONE%
:: cleanup
del GO_.BAT
The sed script assumes that the first character on the 2nd line is
not a space and uses grouping \(...\) to save the first string of
non-space characters as \1 for the RHS. In writing any batch files,
make sure that output filenames such as GO_.BAT don't overwrite
preexisting files of the same name.
4.32. How do I handle Unix shell quoting in sed?
To embed a literal single quote (') in a script, use (a) or (b):
(a) If possible, put the script in double quotes:
sed "s/cannot/can't/g" file
(b) If the script must use single quotes, then close-single-quote
the script just before the SPECIAL single quote, prefix the single
quote with a backslash, and use a 2nd pair of single quotes to
finish marking the script. Thus:
sed 's/cannot$/can'\''t/g' file
Though this looks hard to read, it breaks down to 3 parts:
's/cannot$/can' \' 't/g'
--------------- -- -----
To embed a literal double quote (") in a script, use (a) or (b):
(a) If possible, put the script in single quotes. You don't need to
prefix the double quotes with anything. Thus:
sed 's/14"/fourteen inches/g' file
(b) If the script must use double quotes, then prefix the SPECIAL
double quote with a backslash (\). Thus,
sed "s/$length\"/$length inches/g" file
To embed a literal backslash (\) into a script, enter it twice:
sed 's/C:\\DOS/D:\\DOS/g' config.sys
FILES, DIRECTORIES, AND PATHS
4.40. How do I read (insert/add) a file at the top of a textfile?
Normally, adding a "header" file to the top of a "body" file is
done from the command prompt before passing the file on to sed.
(MS-DOS below version 6.0 must use COPY and DEL instead of MOVE in
the following example.)
copy header.txt+body temp # MS-DOS command 1
echo Y | move temp body # MS-DOS command 2
#
cat header.txt body >temp; mv temp body # Unix commands
However, if inserting the file must occur within sed, there is a
way. The sed command "1 r header.txt" will not work; it will print
line 1 and then insert "header.txt" between lines 1 and 2. The
following script solves this problem; however, there must be at
least 2 lines in the target file for the script to work properly.
# sed script to insert "header.txt" above the first line
1{h; r header.txt
D; }
2{x; G; }
#---end of sed script---
4.41. How do I make substitutions in every file in a directory, or in
a complete directory tree?
4.41.1. - ssed and Perl solution
The best solution for multiple files in a single directory is to
use ssed or gsed v4.0 or higher:
sed -i.BAK 's|foo|bar|g' files # -i does in-place replacement
If you don't have ssed, there is a similar solution in Perl. (Yes,
we know this is a FAQ file for sed, not perl, but perl is more
common than ssed for many users.)
perl -pi.bak -e 's|foo|bar|g' files # or
perl -pi.bak -e 's|foo|bar|g' `find /pathname -name "filespec"`
For each file in the filelist, sed (or Perl) renames the source
file to "filename.bak"; the modified file gets the original
filename. Remove '.bak' if you don't need backup copies. (Note the
use of "s|||" instead of "s///" here, and in the scripts below. The
vertical bars in the 's' command let you replace '/some/path' with
'/another/path', accommodating slashes in the LHS and RHS.)
To recurse directories in Unix or GNU/Linux:
# We use xargs to prevent passing too many filenames to sed, but
# this command will fail if filenames contain spaces or newlines.
find /my/path -name '*.ht' -print | xargs sed -i.BAK 's|foo|bar|g'
To recurse directories under Windows 2000 (CMD.EXE or COMMAND.COM):
# This syntax isn't supported under Windows 9x COMMAND.COM
for /R c:\my\path %f in (*.htm) do sed -i.BAK "s|foo|bar|g" %f
4.41.2. - Unix solution
For all files in a single directory, assuming they end with *.txt
and you have no files named "[anything].txt.bak" already, use a
shell script:
#! /bin/sh
# Source files are saved as "filename.txt.bak" in case of error
# The '&&' after cp is an additional safety feature
for file in *.txt
do
cp $file $file.bak &&
sed 's|foo|bar|g' $file.bak >$file
done
To do an entire directory tree, use the Unix utility find, like so
(thanks to Jim Dennis <jadestar@rahul.net> for this script):
#! /bin/sh
# filename: replaceall
# Backup files are NOT saved in this script.
find . -type f -name '*.txt' -print | while read i
do
sed 's|foo|bar|g' $i > $i.tmp && mv $i.tmp $i
done
This previous shell script recurses through the directory tree,
finding only files in the directory (not symbolic links, which will
be encountered by the shell command "for file in *.txt", above). To
preserve file permissions and make backup copies, use the 2-line cp
routine of the earlier script instead of "sed ... && mv ...". By
replacing the sed command 's|foo|bar|g' with something like
sed "s|$1|$2|g" ${i}.bak > $i
using double quotes instead of single quotes, the user can also
employ positional parameters on the shell script command tail, thus
reusing the script from time to time. For example,
replaceall East West
would modify all your *.txt files in the current directory.
4.41.3. - DOS solution:
MS-DOS users should use two batch files like this:
@echo off
:: MS-DOS filename: REPLACE.BAT
::
:: Create a destination directory to put the new files.
:: Note: The next command will fail under Novel Netware
:: below version 4.10 unless "SHOW DOTS=ON" is active.
if not exist .\NEWFILES\NUL mkdir NEWFILES
for %%f in (*.txt) do CALL REPL_2.BAT %%f
echo Done!!
:: ---End of first batch file---
@echo off
:: MS-DOS filename: REPL_2.BAT
::
sed "s/foo/bar/g" %1 > NEWFILES\%1
:: ---End of the second batch file---
When finished, the current directory contains all the original
files, and the newly-created NEWFILES subdirectory contains the
modified *.TXT files. Do not attempt a command like
for %%f in (*.txt) do sed "s/foo/bar/g" %%f >NEWFILES\%%f
under any version of MS-DOS because the output filename will be
created as a literal '%f' in the NEWFILES directory before the
%%f is expanded to become each filename in (*.txt). This occurs
because MS-DOS creates output filenames via redirection commands
before it expands "for..in..do" variables.
To recurse through an entire directory tree in MS-DOS requires a
batch file more complex than we have room to describe. Examine the
file SWEEP.BAT in Timo Salmi's great archive of batch tricks,
located at <ftp://garbo.uwasa.fi/pc/link/tsbat.zip> (this file is
regularly updated). Another alternative is to get an external
program designed for directory recursion. Here are some recommended
programs for directory recursion. The first one, FORALL, runs under
either OS/2 or DOS. Unfortunately, none of these supports Win9x
long filenames.
http://hobbes.nmsu.edu/pub/os2/util/disk/forall72.zip
ftp://garbo.uwasa.fi/pc/filefind/target15.zip
4.42. How do I replace "/some/UNIX/path" in a substitution?
Technically, the normal meaning of the slash can be disabled by
prefixing it with a backslash. Thus,
sed 's/\/some\/UNIX\/path/\/a\/new\/path/g' files
But this is hard to read and write. There is a better solution.
The s/// substitution command allows '/' to be replaced by any
other character (including spaces or alphanumerics). Thus,
sed 's|/some/UNIX/path|/a/new/path|g' files
and if you are using variable names in a Unix shell script,
sed "s|$OLDPATH|$NEWPATH|g" oldfile >newfile
4.43. How do I replace "C:\SOME\DOS\PATH" in a substitution?
For MS-DOS users, every backslash must be doubled. Thus, to replace
"C:\SOME\DOS\PATH" with "D:\MY\NEW\PATH":
sed "s|C:\\SOME\\DOS\\PATH|D:\\MY\\NEW\\PATH|g" infile >outfile
Remember that DOS pathnames are not case sensitive and can appear
in upper or lower case in the input file. If this concerns you, use
a version of sed which can ignore case when matching (gsed, ssed,
sedmod, sed16).
@echo off
:: sample MS-DOS batch file to alter path statements
:: requires GNU sed with the /i flag for s///
set old=C:\\SOME\\DOS\\PATH
set new=D:\\MY\\NEW\\PATH
gsed "s|%old%|%new%|gi" infile >outfile
:: or
:: sedmod -i "s|%old%|%new%|g" infile >outfile
set old=
set new=
Also, remember that under Windows long filenames may be stored in
two formats: e.g., as "C:\Program Files" or as "C:\PROGRA~1".
4.44. How do I emulate file-includes, using sed?
Given an input file with file-include statements, similar to
C-style includes or "server-side includes" (SSI) of this format:
This is the source file. It's short.
Its name is simply 'source'. See the script below.
<!--#include file="ashe.inc"-->
And this is any amount of text between
<!--#include file="jesse.inc"-->
This is the last line of the file.
How do we direct sed to import/insert whichever files are at the
point of the 'file="filename"' token? First, use this file:
#n
# filename: incl.sed
# Comments supported by GNU sed or ssed. Leading '#n' should
# be on line 1, columns 1-2 of the line.
/<!--#include file="/ { # For each "include file" command,
=; # print the line number
s/^[^"]*"/{r /; # change pattern to 'r{ '
s/".*//p; # delete rest to EOL, print
# and a(ppend) a delete command
a\
d;}
}
#---end of sed script---
Second, use the following shell script or DOS batch file (if
running a DOS batch file, use "double quotes" instead of 'single
quotes', and use "del" instead of "rm" to remove the temp file):
sed -nf incl.sed source | sed 'N;N;s/\n//' >temp.sed
sed -f temp.sed source >target
rm temp.sed
If you have GNU sed or ssed, you can reduce the script even further
(thanks to Michael Carmack for the reminder):
sed -nf incl.sed source | sed 'N;N;s/\n//' | sed -f - source >target
In brief, the script replaces each filename with a 'r filename'
command to insert the file at that point, while omitting the
extraneous material. Two important things to note with this script:
(1) There should be only one '#include file' directive per line, and
(2) each '#include file' directive must be the *only* thing on that
line, because everything else on the line will be deleted.
Though the script uses GNU sed or ssed because of the great support
for embedded script comments, it should run on any version of sed.
If not, write me and let me know.
------------------------------
5. WHY ISN'T THIS WORKING?
5.1. Why don't my variables like $var get expanded in my sed script?
Because your sed script uses 'single quotes' instead of "double
quotes." Unix shells never expand $variables in single quotes.
This is probably the most frequently-asked sed question. For more
info on using variables, see section 4.30.
5.2. I'm using 'p' to print, but I have duplicate lines sometimes.
Sed prints the entire file by default, so the 'p' command might
cause the duplicate lines. If you want the whole file printed,
try removing the 'p' from commands like 's/foo/bar/p'. If you want
part of the file printed, run your sed script with -n flag to
suppress normal output, and rewrite the script to get all output
from the 'p' comand.
If you're still getting duplicate lines, you are probably finding
several matches for the same line. Suppose you want to print lines
with the words "Peter" or "James" or "John", but not the same line
twice. The following command will fail:
sed -n '/Peter/p; /James/p; /John/p' files
Since all 3 commands of the script are executed for each line,
you'll get extra lines. A better way is to use the 'd' (delete) or
'b' (branch) commands, like so (with GNU sed):
sed '/Peter/b; /James/b; /John/b; d' files # one way
sed -n '/Peter/{p;d;};/James/{p;d;};/John/p' files # a 2nd way
sed -n '/Peter/{p;b;};/James/{p;b;};/John/p' files # a 3rd way
sed '/Peter\|James\|John/!d' files # shortest way
On standard seds, these must be broken down with -e commands:
sed -e '/Peter/b' -e '/James/b' -e '/John/b' -e d files
sed -n -e '/Peter/{p;d;}' -e '/James/{p;d;}' -e '/John/p' files
The 3rd line would require too many -e commands to fit on one line,
since standard versions of sed require an -e command after each 'b'
and also after each closing brace '}'.
5.3. Why does my DOS version of sed process a file part-way through
and then quit?
First, look for errors in the script. Have you used the -n switch
without telling sed to print anything to the console? Have you read
the docs to your version of sed to see if it has a syntax you may
have misused? (Look for an N or H command that gathers too much.)
Next, if you are sure your sed script is valid, a probable cause is
an end-of-file marker embedded in the file. An EOF marker (SUB) is
a Control-Z character, with the value of 1A hex (26 decimal). As
soon as any DOS version of sed encounters a Ctrl-Z character, sed
stops processing.
To locate the EOF character, use Vern Buerg's shareware file viewer
LIST.COM <http://www.buerg.com/list.html>. In text mode, look for a
right-arrow symbol; in hex mode (Alt-H), look for a 1A code. With
Unix utilities ported to DOS, use 'od' (octal dump) to display
hexcodes in your file, and then use sed to locate the offending
character:
od -txC badfile.txt | sed -n "/ 1a /p; / 1a$/p"
Then edit the input file to remove the offending character(s).
If you would rather NOT edit the input file, there is still a fix.
It requires the DJGPP 32-bit port of 'tr', the Unix translate
program (v1.22 or higher). GNU od and tr are currently at v2.0 (for
DOS); they are packaged with the GNU text utilities, available at
ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/txt20b.zip
http://www.simtel.net/gnudlpage.php?product=/gnu/djgpp/v2gnu/txt20b.zip&name=txt20b.zip
It is important to get the DJGPP version of 'tr' because other
versions ported to DOS will stop processing when they encounter the
EOF character. Use the -d (delete) command:
tr -d \32 < badfile.txt | sed -f myscript.sed
5.4. My RE isn't matching/deleting what I want it to. (Or, "Greedy vs.
stingy pattern matching")
The two most common causes for this problem are: (1) misusing the
'.' metacharacter, and (2) misusing the '*' metacharacter. The RE
'.*' is designed to be "greedy" (i.e., matching as many characters
as possible). However, sometimes users need an expression which is
"stingy," matching the shortest possible string.
(1) On single-line patterns, the '.' metacharacter matches any
single character on the line. ('.' cannot match the newline at the
end of the line because the newline is removed when the line is put
into the pattern space; sed adds a newline automatically when the
pattern space is printed.) On multi-line patterns obtained with the
'N' or 'G' commands, '.' _will_ match a newline in the middle of the
pattern space. If there are 3 lines in the pattern space, "s/.*//"
will delete all 3 lines, not just the first one (leaving 1 blank
line, since the trailing newline is added to the output).
Normal misuse of '.' occurs in trying to match a word or bounded
field, and forgetting that '.' will also cross the field limits.
Suppose you want to delete the first word in braces:
echo {one} {two} {three} | sed 's/{.*}/{}/' # fails
echo {one} {two} {three} | sed 's/{[^}]*}/{}/' # succeeds
's/{.*}/{}/' is not the solution, since the regex '.' will match
any character, including the close braces. Replace the '.' with
'[^}]', which signifies a negated character set '[^...]' containing
anything other than a right brace. FWIW, we know that 's/{one}/{}/'
would also solve our question, but we're trying to illustrate the
use of the negated character set: [^anything-but-this].
A negated character set should be used for matching words between
quote marks, for fields separated by commas, and so on. See also
section 4.12 ("How do I parse a comma-delimited data file?").
(2) The '*' metacharacter represents zero or more instances of the
previous expression. The '*' metacharacter looks for the leftmost
possible match first and will match zero characters. Thus,
echo foo | sed 's/o*/EEE/'
will generate 'EEEfoo', not 'fEEE' as one might expect. This is
because /o*/ matches the null string at the beginning of the word.
After finding the leftmost possible match, the '*' is GREEDY; it
always tries to match the longest possible string. When two or
three instances of '.*' occur in the same RE, the leftmost instance
will grab the most characters. Consider this example, which uses
grouping '\(...\)' to save patterns:
echo bar bat bay bet bit | sed 's/^.*\(b.*\)/\1/'
What will be displayed is 'bit', never anything longer, because the
leftmost '.*' took the longest possible match. Remember this rule:
"leftmost match, longest possible string, zero also matches."
5.5. What is CSDPMI*B.ZIP and why do I need it?
If you use MS-DOS outside of Windows and try to use GNU sed v1.18
or 3.02, you may encounter the following error message:
no DPMI - Get csdpmi*b.zip
"DPMI" stands for DOS Protected Mode Interface; it's basically a
means of running DOS in Protected Mode (as opposed to Real Mode),
which allows programs to share resources in extended memory without
conflicting with one another. Running HIMEM.SYS and EMM386.EXE is
not enough. The "CSDPMI*B.ZIP" refers to files written by Charles
Sandmann to provide DPMI services for 32-bit computers (i.e.,
386SX, 386DX, 486SX, etc.). Download the binary file (the source
code is also available):
http://www.delorie.com/djgpp/dl/ofc/simtel/v2misc/csdpmi5b.zip # binaries
http://www.delorie.com/djgpp/dl/ofc/simtel/v2misc/csdpmi5s.zip # source
ftp://ftp.cdrom.com/pub/simtelnet/gnu/djgpp/v2misc/csdpmi5b.zip # binaries
ftp://ftp.cdrom.com/pub/simtelnet/gnu/djgpp/v2misc/csdpmi5s.zip # source
and extract CWSDPMI.EXE, CWSDPR0.EXE and CWSPARAM.EXE from the ZIP
file. Put all 3 CWS*.EXE files in the same directory as GSED.EXE
and you're all set. There are DOC files enclosed, but they're
nearly incomprehensible for the average computer user. (Another
case of user-vicious documentation.)
If you're running Windows and you normally use a DOS session to run
GNU sed (i.e., you get to a DOS prompt with a resizable window or
you press Alt-Enter to switch to full-screen mode), you don't need
the CWS*.EXE files at all, since Windows uses DPMI already.
5.6. Where are the man pages for GNU sed?
Prior to GNU sed v3.02, there weren't any. Until recently, man
pages distributed with gsed were borrowed from old sources or from
other compilations. None of them were "official." GNU sed v3.02 had
the first real set of official man pages, and the documentation has
greatly improved with GNU sed version 4.0, which now includes both
man pages and textinfo pages.
5.7. How do I tell what version of sed I am using?
Try entering "sed" all by itself on the command line, followed by
no arguments or parameters. Also, try "sed --version". In a
pinch, you can also try this:
strings sed | grep -i ver
Your version of 'strings' must be a version of the Unix utility of
this name. It should not be the DOS utility STRINGS.COM by Douglas
Boling.
5.8. Does sed issue an exit code?
Most versions of sed do not, but check the documentation that came
with whichever version you are using. GNU sed issues an exit code
of 0 if the program terminated normally, 1 if there were errors in
the script, and 2 if there were errors during script execution.
5.9. The 'r' command isn't inserting the file into the text.
On most versions of sed (but not all), the 'r' (read) and 'w'
(write) commands must be followed by exactly one space, then the
filename, and then terminated by a newline. Any additional
characters before or after the filename are interpreted as *part*
of the filename. Thus
/RE/r insert.me
will would try to locate a file called ' insert.me' (note the
leading space!). If the file was not found, most versions of sed
say nothing, not even an error message.
When sed scripts are used on the command line, every 'r' and 'w'
must be the last command in that part of the script. Thus,
sed -e '/regex/{r insert.file;d;}' source # will fail
sed -e '/regex/{r insert.file' -e 'd;}' source # will succeed
5.10. Why can't I match or delete a newline using the \n escape sequence?
Why can't I match 2 or more lines using \n?
The \n will never match the newline at the end-of-line because the
newline is always stripped off before the line is placed into the
pattern space. To get 2 or more lines into the pattern space, use
the 'N' command or something similar (such as 'H;...;g;').
Sed works like this: sed reads one line at a time, chops off the
terminating newline, puts what is left into the pattern space where
the sed script can address or change it, and when the pattern space
is printed, appends a newline to stdout (or to a file). If the
pattern space is entirely or partially deleted with 'd' or 'D', the
newline is *not* added in such cases. Thus, scripts like
sed 's/\n//' file # to delete newlines from each line
sed 's/\n/foo\n/' file # to add a word to the end of each line
will _never_ work, because the trailing newline is removed _before_
the line is put into the pattern space. To perform the above tasks,
use one of these scripts instead:
tr -d '\n' < file # use tr to delete newlines
sed ':a;N;$!ba;s/\n//g' file # GNU sed to delete newlines
sed 's/$/ foo/' file # add "foo" to end of each line
Since versions of sed other than GNU sed have limits to the size of
the pattern buffer, the Unix 'tr' utility is to be preferred here.
If the last line of the file contains a newline, GNU sed will add
that newline to the output but delete all others, whereas tr will
delete all newlines.
To match a block of two or more lines, there are 3 basic choices:
(1) use the 'N' command to add the Next line to the pattern space;
(2) use the 'H' command at least twice to append the current line
to the Hold space, and then retrieve the lines from the hold space
with x, g, or G; or (3) use address ranges (see section 3.3, above)
to match lines between two specified addresses.
Choices (1) and (2) will put an \n into the pattern space, where it
can be addressed as desired ('s/ABC\nXYZ/alphabet/g'). One example
of using 'N' to delete a block of lines appears in section 4.13
("How do I delete a block of _specific_ consecutive lines?"). This
example can be modified by changing the delete command to something
else, like 'p' (print), 'i' (insert), 'c' (change), 'a' (append),
or 's' (substitute).
Choice (3) will not put an \n into the pattern space, but it _does_
match a block of consecutive lines, so it may be that you don't
even need the \n to find what you're looking for. Since several
versions of sed support this syntax:
sed '/start/,+4d' # to delete "start" plus the next 4 lines,
in addition to the traditional '/from here/,/to there/{...}' range
addresses, it may be possible to avoid the use of \n entirely.
5.11. My script aborts with an error message, "event not found".
This error is generated by the csh or tcsh shells, not by sed. The
exclamation mark (!) is special to csh/tcsh, and if you use it in
command-line or shell scripts--even within single quotes--it must
be preceded by a backslash. Thus, under the csh/tcsh shell:
sed '/regex/!d' # will fail
sed '/regex/\!d' # will succeed
The exclamation mark should not be prefixed with a backslash when
the script is called from a file, as "-f script.file".
------------------------------
6. OTHER ISSUES
6.1. I have a certain problem that stumps me. Where can I get help?
Post your question on the "sed-users" mailing list (section 2.3.2),
where many sed users will be able to see your question. You will have
to subscribe to have posting privileges.
Your other alternative is one of these newsgroups:
- alt.comp.editors.batch
- comp.editors
- comp.unix.questions
- comp.unix.shell
6.2. How does sed compare with awk, perl, and other utilities?
Awk is a much richer language with many features of a programming
language, including variable names, math functions, arrays, system
calls, etc. Its command structure is similar to sed:
address { command(s) }
which means that for each line or range of lines that matches the
address, execute the command(s). In both sed and awk, an address
can be a line number or a RE somewhere on the line, or both.
In program size, awk is 3-10 times larger than sed. Awk has most of
the functions of sed, but not all. Notably, sed supports
backreferences (\1, \2, ...) to previous expressions, and awk does
not have any comparable syntax. (One exception: GNU awk v3.0
introduced gensub(), which supports backreferences only on
substitutions.)
Perl is a general-purpose programming language, with many features
beyond text processing and interprocess communication, taking it
well past awk or other scripting languages. Perl supports every
feature sed does and has its own set of extended regular
expressions, which give it extensive power in pattern matching and
processing. (Note: the standard perl distribution comes with 's2p',
a sed-to-perl conversion script. See section 3.6 for more info.)
Like sed and awk, perl scripts do not need to be compiled into
binary code. Like sed, perl can also run many useful "one-liners"
from the command line, though with greater flexibility; see
question 4.41 ("How do I make substitutions in every file in a
directory, or in a complete directory tree?").
On the other hand, the current version of perl is from 8 to 35
times larger than sed in its executables alone (perl's library
modules and allied files not included!). Further, for most simple
tasks such as substitution, sed executes more quickly than either
perl or awk. All these utilities serve to process input text,
transforming it to meet our needs . . . or our arbitrary whims.
6.3. When should I use sed?
When you need a small, fast program to modify words, lines, or
blocks of lines in a textfile.
6.4. When should I NOT use sed?
You should not use sed when you have "dedicated" tools which can do
the job faster or with an easier syntax. Do not use sed when you
only want to:
- print individual lines, based on patterns within the line itself.
Instead, use "grep".
- print blocks of lines, with 1 or more lines of context above or
below a specific regular expression. Instead, use the GNU version
of grep as follows:
grep -A{number} -B{number} "regex"
- remove individual lines, based on patterns within the line
itself. Instead, use "grep -v".
- print line numbers. Instead, use "nl" or "cat -n".
- reformat lines or paragraphs. Instead, use "fold", "fmt" or "par".
The tr utility is also more suited than sed to some simple tasks. For
example, to:
- delete individual characters. Instead of "s/[a-d]//g", use
tr -d "[a-d]"
- squeeze sequential characters. Instead of "s/ee*/e/g", use
tr -s "{character-set}"
- change individual characters. Instead of "y/abcdef/ABCDEF/", use
tr "[a-f]" "[A-F]"
Note, however, that tr does not support giving input files on the
command line, so the syntax is:
tr {options-and-patterns} < input-file
or, to process multiple files:
cat input-file1 input-file2 | tr {options-and-patterns}
If you have multiple files, using tr instead of sed is often more of
an exercise than a useful thing. Although sed can perfectly emulate
certain functions of cat, grep, nl, rev, sort, tac, tail, tr, uniq,
and other utilities, producing identical output, the native utilities
are usually optimized to do the job more quickly than sed.
6.5. When should I ignore sed and use awk or Perl instead?
If you can write the same script in awk or Perl and do it in less
time, then use Perl or awk. There's no reason to spend an hour
writing and debugging a sed script if you can do it in Perl in 10
minutes (assuming that you know Perl already) and if the processing
time or memory use is not a factor. Don't hunt pheasants with a .22
if you have a shotgun at your side . . . unless you simply enjoy
the challenge!
Specifically, use awk or perl if you need to:
- count fields or words on a line. (awk)
- count lines in a block or objects in a file.
- check lengths of strings or do math operations.
- handle very long lines or need very large buffers. (or gsed)
- handle binary data (control characters). (perl: binmode)
- loop through an array or list.
- test for file existence, filesize, or fileage.
- treat each paragraph as a line. (well, not always)
6.6. Known limitations among sed versions
Limits on distributed versions, although source code for most
versions of free sed allows for modification and recompilation. As
used below, "no limit" means there is no "fixed" limit. Limits are
actually determined by one's hardware, memory, operating system,
and which C library is used to compile sed.
6.6.1. Maximum line length
GNU sed: no limit
ssed: no limit
sedmod v1.0: 4096 bytes
HHsed v1.5: 4000 bytes
sed v1.6: [pending]
6.6.2. Maximum size for all buffers (pattern space + hold space)
GNU sed: no limit
ssed: no limit
sedmod v1.0: 4096 bytes
HHsed v1.5: 4000 bytes
sed v1.6: [pending]
6.6.3. Maximum number of files that can be read with read command
GNU sed v3+: no limit
ssed: no limit
GNU sed v2.05: total no. of r and w commands may not exceed 32
sedmod v1.0: total no. of r and w commands may not exceed 20
sed v1.6: [pending]
6.6.4. Maximum number of files that can be written with 'w' command
GNU sed v3+: no limit (but typical Unix is 253)
ssed: no limit (but typical Unix is 253)
GNU sed v2.05: total no. of r and w commands may not exceed 32
sedmod v1.0: 10
HHsed v1.5: 10
sed v1.6: [pending]
6.6.5. Limits on length of label names
GNU sed: no limit
ssed: no limit
HHsed v1.5: no limit
sed v1.6: [pending]
BSD sed: 8 characters
Note that GNU sed and ssed both consider a semicolon to terminate a
label name.
6.6.6. Limits on length of write-file names
GNU sed: no limit
ssed: no limit
HHsed v1.5: no limit
sed v1.6: [pending]
BSD sed: 40 characters
6.6.7. Limits on branch/jump commands
GNU sed: no limit
ssed: no limit
HHsed v1.5: 50
sed v1.6: [pending]
As a practical consequence, this means that HHsed will not read
more than 50 lines into the pattern space via an N command, even if
the pattern space is only a few hundred bytes in size. HHsed exits
with an error message, "infinite branch loop at line {nn}".
6.7. Known incompatibilities between sed versions
6.7.1. Issuing commands from the command line
Most versions of sed permit multiple commands to issued on the
command line, separated by a semicolon (;). Thus,
sed 'G;G' file
should triple-space a file. However, for non-GNU sed, some commands
*require* separate expressions on the command line. These include:
- all labels (':a', ':more', etc.)
- all branching instructions ('b', 't')
- commands to read and write files ('r' and 'w')
- any closing brace, '}'
If these commands are used, they must be the LAST commands of an
expression. Subsequent commands must use another expression
(another -e switch plus arguments). E.g.,
sed -e :a -e 's/^.\{1,77\}$/ &/;ta' -e 's/\( *\)\1/\1/' files
GNU sed, ssed, sed15 and sed16 all permit these commands to be
followed by a semicolon, so the previous script can be written:
sed ':a;s/^.\{1,77\}$/ &/;ta;s/\( *\)\1/\1/' files
Versions differ in implementing the 'a' (append), 'c' (change), and
'i' (insert) commands:
sed "/foo/i New text here" # HHsed/sedmod/gsed-30280
gsed -e "/foo/i\\" -e "New text here" # GNU sed
sed1 -e "/foo/i" -e "New text here" # one version of sed
sed2 "/foo/i\ New text here" # another version
6.7.2. Using comments (prefixed by the '#' sign)
Most versions of sed permit comments to appear in sed scripts only
on the first line of the script. Comments on line 2 or thereafter
are not recognized and will generate an error like "unrecognized
command" or "command [bad-line-here] has trailing garbage".
GNU sed, HHsed, sedmod, and HP-UX sed permit comments to appear on
any line of the script, except after labels and branching commands
(b,t), *provided* that a semicolon (;) occurs after the command
itself. This syntax makes sed similar to awk and perl, which use a
similar commenting structure in their scripts. Thus,
# GNU style sed script
$!N; # except for last line, get next line
s/^\([0-9]\{5\}\).*\n\1.*//; # if first 5 digits of each line
# match, delete BOTH lines.
t skip
P; # print 1st line only if no match
:skip
D; # delete 1st line of pattern space and loop
#---end of script---
is a valid script for GNU-based versions of sed, but is
unrecognized for most other versions of sed.
Finally, if the first two characters in a disk file script are
"#n", the output is suppressed, exactly as if -n were entered on
the command line. This is true for the following versions of sed:
- ssed v3.57 and above
- gsed
- HHsed v1.5
- sed v1.6
This syntax is not recognized by these versions of sed:
- ssed v3.45 to v3.50 (other versions untested)
- sedmod v1.0
6.7.3. Special syntax in REs
A. HHsed v1.5 (by Howard Helman)
The following expressions can be used for /RE/ addresses or in the
LHS side of a substitution:
+ - 1 or more occurrences of previous RE: same as \{1,\}
\< - boundary between nonword and word character
\> - boundary between word and nonword character
The following expressions can be used for /RE/ addresses or on
either side of a substitution:
\a - bell (ASCII 07, 0x07)
\b - backspace (ASCII 08, 0x08)
\e - escape (ASCII 27, 0x1B)
\f - formfeed (ASCII 12, 0x0C)
\n - newline (printed as 2 bytes, 0D 0A or ^M^J, in DOS)
\r - return (ASCII 13, 0x0D)
\t - tab (ASCII 09, 0x09)
\v - vertical tab (ASCII 11, 0x0B)
\xHH - the ASCII character corresponding to 2 hex digits HH.
B. sed v1.6 (by Walter Briscoe)
sed v1.6 accepts every expression supported by sed v1.5 (above),
plus the following elements, which can also used in the RHS of a
substitution (in addition to those listed above):
\\~ - insert replacement pattern defined in last s/// command
(must be used alone in the RHS)
\l - change next element to lower case
\L - change remaining elements to lower case
\u - change next element to upper case
\U - change remaining elements to upper case
\e - end case conversion of next element
\E - end case conversion of remaining elements
$0 - insert pattern space BEFORE the substitution
$1-$9 - match Nth word on the pattern space
C. sedmod v1.0 (by Hern Chen)
The following expressions can be used for /RE/ addresses in the LHS
of a substitution:
+ - 1 or more occurrences of previous RE: same as \{1,\}
\a - any alphanumeric: same as [a-zA-Z0-9]
\A - 1 or more alphas: same as \a+
\d - any digit: same as [0-9]
\D - 1 or more digits: same as \d+
\h - any hex digit: same as [0-9a-fA-F]
\H - 1 or more hexdigits: same as \h+
\l - any letter: same as [A-Za-z]
\L - 1 or more letters: same as \l+
\n - newline (read as 2 bytes, 0D 0A or ^M^J, in DOS)
\s - any whitespace character: space, tab, or vertical tab
\S - 1 or more whitespace chars: same as \s+
\t - tab (ASCII 09, 0x09)
\< - boundary between nonword and word character
\> - boundary between word and nonword character
The following expressions can be used in the RHS of a substitution.
"Elements" refer to \1 .. \9, &, $0, or $1 .. $9:
& - insert regexp defined on LHS
\e - end case conversion of next element
\E - end case conversion of remaining elements
\l - change next element to lower case
\L - change remaining elements to lower case
\n - newline (printed as 2 bytes, 0D 0A or ^M^J, in DOS)
\t - tab (ASCII 09, 0x09)
\u - change next element to upper case
\U - change remaining elements to upper case
$0 - insert the original pattern space
$1-$9 - match Nth word on the pattern space
D. UnixDos sed
The following expressions can be used in text, LHS, and RHS:
\n - newline (printed as 2 bytes, 0D 0A or ^M^J, in DOS)
E. GNU sed v1.03 (by Frank Whaley)
When used with the -x (extended) switch on the command line, or
when '#x' occurs as the first line of a script, Whaley's gsed103
supports the following expressions in both the LHS and RHS of a
substitution:
\| matches the expression on either side
? 0 or 1 occurrences of previous RE: same as \{0,1\}
+ 1 or more occurrence of previous RE: same as \{1,\}
\a "alert" beep (BEL, Ctrl-G, 0x07)
\b backspace (BS, Ctrl-H, 0x08)
\f formfeed (FF, Ctrl-L, 0x0C)
\n newline (LF, Ctrl-J, 0x0A)
\r carriage-return (CR, Ctrl-M, 0x0D)
\t horizontal tab (HT, Ctrl-I, 0x09)
\v vertical tab (VT, Ctrl-K, 0x0B)
\bBBB binary char, where BBB are 1-8 binary digits, [0-1]
\dDDD decimal char, where DDD are 1-3 decimal digits, [0-9]
\oOOO octal char, where OOO are 1-3 octal digits, [0-7]
\xHH hex char, where HH are 1-2 hex digits, [0-9A-F]
In normal mode, with or without the -x switch, the following escape
sequences are also supported in regex addressing or in the LHS of a
substitution:
\` matches beginning of pattern space: same as /^/
\' matches end of pattern space: same as /$/
\B boundary between 2 word or 2 nonword characters
\w any nonword character [*BUG!* should be a word char]
\W any nonword character: same as /[^A-Za-z0-9]/
\< boundary between nonword and word char
\> boundary between word and nonword char
F. GNU sed v2.05 and higher versions
The following expressions can be used for /RE/ addresses or in the
LHS side of a substitution:
\` - matches the beginning of the pattern space (same as "^")
\' - matches the end of the pattern space (same as "$")
\? - 0 or 1 occurrence of previous character: same as \{0,1\}
\+ - 1 or more occurrences of previous character: same as \{1,\}
\| - matches the string on either side, e.g., foo\|bar
\b - boundary between word and nonword chars (reversible)
\B - boundary between 2 word or between 2 nonword chars
\n - embedded newline (usable after N, G, or similar commands)
\w - any word character: [A-Za-z0-9_]
\W - any nonword char: [^A-Za-z0-9_]
\< - boundary between nonword and word character
\> - boundary between word and nonword character
On \b, \B, \<, and \>, see section 6.7.4 ("Word boundaries"),
below.
Undocumented -r switch:
Beginning with version 3.02, GNU sed has an undocumented -r switch
(undocumented till version 4.0), activating Extended Regular
Expressions in the following manner:
? - 0 or 1 occurrence of previous character
+ - 1 or more occurrences of previous character
| - matches the string on either side, e.g., foo|bar
(...) - enable grouping without backslash
{...} - enable interval expression without backslash
When the -r switch (mnemonic: "regular expression") is used, prefix
these symbols with a backslash to disable the special meaning.
Escape sequences:
Beginning with version 3.02.80, the following escape sequences can
now be used on both sides of a "s///" substitution:
\a "alert" beep (BEL, Ctrl-G, 0x07)
\f formfeed (FF, Ctrl-L, 0x0C)
\n newline (LF, Ctrl-J, 0x0A)
\r carriage-return (CR, Ctrl-M, 0x0D)
\t horizontal tab (HT, Ctrl-I, 0x09)
\v vertical tab (VT, Ctrl-K, 0x0B)
\oNNN a character with the octal value NNN
\dNNN a character with the decimal value NNN
\xHH a character with the hexadecimal value HH
Note that GNU sed also supports "character classes", a POSIX
extension to regexes, described in section 3.7, above.
G. sed 4.0 and higher versions
The following expressions can be used in the RHS of a substitution.
\e - end case conversion
\l - change next character to lower case
\L - change remaining text to lower case
\n - newline (printed as 2 bytes, 0D 0A or ^M^J, in DOS)
\t - tab (ASCII 09, 0x09)
\u - change next character to upper case
\U - change remaining text to upper case
In addition, GNU sed 4.0 can modify the way ^ and $ are interpreted,
so that ^ can also match an empty string after a newline character,
and $ can also match an empty string before a newline character (to
do this, add an "M" after the regular expression terminator, like
/^>/M -- see section 3.1.1). Even if you use this feature, \` and \'
still match the beginning and the end of the pattern space,
respectively.
H. ssed
Everything that was said for GNU sed applies to ssed as well. In
addition, in Perl-mode (-R switch), these become active or inactive:
. - no longer matches new-line characters
\A - matches beginning of pattern space
\Z - matches end of pattern space or last newline in the PS
\z - matches end of pattern space
\d - matches any digit: same as [0-9]
\D - matches any non-digit: same as [^0-9]
\` - no longer matches beginning of pattern space
\' - no longer matches end of pattern space
\< - no longer matches boundary between nonword & word char
\> - no longer matches boundary between word & nonword char
\oNNN - no longer matches char with octal value NNN
\dNNN - no longer matches char with decimal value NNN
\NNN - matches char with octal value NNN
Perl mode supports lookahead (?=match) and lookbehind (?<=match)
pattern matching. The matched text is NOT captured in "&" for s///
replacements!
foo(?=bar) - match "foo" only if "bar" follows it
foo(?!bar) - match "foo" only if "bar" does NOT follow it
(?<=foo)bar - match "bar" only if "foo" precedes it
(?<!foo)bar - match "bar" only if "foo" does NOT precede it
(?<!in|on|at)foo
- match "foo" only if NOT preceded by "in", "on" or "at"
(?<=\d{3})(?<!999)foo
- match "foo" only if preceded by 3 digits other than "999"
In Perl mode, there are two new switches in /addressing/ or s///
commands. Switches may be lowercase in s/// commands, but must be
uppercase in /addressing/:
/S - lets "." match a newline also
/X - extra whitespace is ignored. See below, for sample usage.
Here are some examples of Perl-style regular expressions. Use the -R
switch.
(?i)abc - case-insensitive match of abc, ABC, aBc, ABc, etc.
ab(?i)c - same as above; the (?i) applies throughout the pattern
(ab(?i)c) - matches abc or abC; the outer parens make the difference!
(?m) - multi-line pattern space: same as "s/FIND/REPL/M"
(?s) - set "." to match newline also: same as "s/FIND/REPL/S"
(?x) - ignore whitespace and #comments; see section (9) below.
(?:abc)foo - match "abcfoo", but do not capture 'abc' in \1
(?:ab|cd)ef - match "abef" or "cdef"; only 'cd' is captured in \1
(?#remark)xy - match "xy"; remarks after "#" are ignored.
And here are some sample uses of /X switch to add comments to complex
expressions. To embed literal spaces, precede with \ or put inside
[brackets].
# ssed script to change "(123) 456-7890" into "[ac123] 456-7890"
#
s/ # BACKSLASH IS NEEDED AT END OF EACH LINE! \
\( # literal left paren, ( \
(\d{3}) # 3 digits \
\) # literal right paren, ) \
[ \t]* # zero or more spaces or tabs \
(\d{3}-\d{4}) # 3 digits, hyphen, 4 digits \
/[ac\1] \2/gx; # replace g(lobally), with e(x)tended spacing
6.7.4. Word boundaries
GNU sed, ssed, sed16, sed15 and sedmod use certain symbols to define
the boundary between a "word character" and a nonword character. A
word character fits the regex "[A-Za-z0-9_]". Note: a word character
includes the underscore "_" but not the hyphen, probably because the
underscore is permissible as a label in sed and in other scripting
languages. (In gsed103, a word character did NOT include the
underscore; it included alphanumerics only.)
These symbols include '\<' and '\>' (gsed, ssed, sed15, sed16,
sedmod) and '\b' and '\B' (gsed only). Note that the boundary
symbols do not represent a character, but a position on the line.
Word boundaries are used with literal characters or character sets
to let you match (and delete or alter) whole words without
affecting the spaces or punctuation marks outside of those words.
They can only be used in a "/pattern/" address or in the LHS of a
's/LHS/RHS/' command. The following table shows how these symbols
may be used in HHsed and GNU sed. Sedmod matches the syntax of
HHsed.
Match position Possible word boundaries HHsed GNU sed
---------------------------------------------------------------
start of word [nonword char]^[word char] \< \< or \b
end of word [word char]^[nonword char] \> \> or \b
middle of word [word char]^[word char] none \B
outside of word [nonword char]^[nonword char] none \B
---------------------------------------------------------------
In ssed, the symbols '\<' and '\>' lose their special meaning when
the -R switch is used to invoke Perl-style expressions. However,
the identical meaning of '\<' and '\>' can be obtained through
these nonmatching, zero-width assertions:
(?<!\w)(?=\w) and (?<=\w)(?!\w)
6.7.5. Commands which operate differently
A. GNU sed version 3.02 and 3.02.80
The N command no longer discards the contents of the pattern space
upon reaching the end of file. This is not a bug, it's a feature.
However, it breaks certain scripts which relied on the older
behavior of N.
'N' adds the Next line to the pattern space, enabling multiple
lines to be stored and acted upon. Upon reaching the last line of
the file, if the N command was issued again, the contents of the
pattern space would be silently deleted and the script would abort
(this has been the traditional behavior). For this reason, sed
users generally wrote:
$!N; # to add the Next line to every line but the last one.
However, certain sed scripts relied on this behavior, such as the
script to delete trailing blank lines at the end of a file (see
script #12 in section 3.2, "Common one-line sed scripts", above).
Also, classic textbooks such as Dale Dougherty and Arnold Robbins'
_sed & awk_ documented the older behavior.
The GNU sed maintainer felt that despite the portability problems
this would cause, changing the N command to print (rather than
delete) the pattern space was more consistent with one's intuitions
about how a command to "append the Next line" _ought_ to behave.
Another fact favoring the change was that "{N;command;}" will
delete the last line if the file has an odd number of lines, but
print the last line if the file has an even number of lines.
To convert scripts which used the former behavior of N (deleting
the pattern space upon reaching the EOF) to scripts compatible with
all versions of sed, change a lone "N;" to "$d;N;".
------------------------------
7. KNOWN BUGS AMONG SED VERSIONS
Most versions of GNU sed and ssed contain a "buglist" in the
archive source code of known errors or reported behaviors that may
be misconstrued as bugs. This portion of the sed FAQ does _not_
attempt to fully reproduce those buglists files. However, we do
seek to do some substantial reporting, particularly where certain
programs have no "buglist" of their own or are not being actively
maintained.
As a rule of thumb, if the bug "bites" someone on the sed-users
mailing list, I tend to report it.
7.1. ssed v3.59 (by Paolo Bonzini)
(1) N does not discard the contents of the pattern space upon
reaching the end of file; not a bug. See section 6.7.5.A, above.
(2) If \x26 is entered into the RHS of a substitution, it is
interpreted as an ampersand metacharacter, and the entire pattern
matched in the "find" portion is inserted at that point. A literal
ampersand should be inserted instead.
(3) Under Windows 2000, the -i switch doesn't create backup files
properly. When passed one or more files to process, the source
file(s) are unchanged, and the output changed files are given
filenames like sedDOSxyz with no way to correspond them with the
names of the source files.
7.2. GNU sed v4.0 - v4.0.5
(1) N does not discard the contents of the pattern space upon
reaching the end of file; not a bug. See section 6.7.5.A, above.
(2) If \x26 is entered into the RHS of a substitution, it is
interpreted as an ampersand metacharacter, and the entire pattern
matched in the "find" portion is inserted at that point. A literal
ampersand should be inserted instead.
7.3. GNU sed v3.02.80
(1) N does not discard the contents of the pattern space upon
reaching the end of file; not a bug. See section 6.7.5.A, above.
(2) Same as #2 for GNU sed v4.0, above.
7.4. GNU sed v3.02
(1) Affects only v3.02 binaries compiled with DJGPP for MS-DOS and
MS-Windows: 'l' (list) command does not display a lone carriage
return (0x0D, ^M) embedded in a line.
(2) The expression "\<" causes problems when attempting the
following types of substitutions, which should print "+aaa +bbb":
echo aaa bbb | sed 's/\</+/g' # prints "+a+a+a +b+b+b"
echo aaa bbb | sed 's/\<./+&/g' # prints "+a+a+a +b+b+b"
(3) The N command no longer discards the contents of the pattern
space upon reaching the end of file. This is not a bug, it's a
feature. See section 6.7.5, "Commands which operate differently".
7.5. GNU sed v2.05
(1) If a number follows the substitute command (e.g., s/f/F/10) and
the number exceeds the possible matches on the pattern space, the
command 't label' _always_ jumps to the specified label. 't' should
jump only if the substitution was successful (or returned "true").
(2) 'l' (list) command does not convert the following characters to
hex values, but passes them through unchanged: 0xF7, 0xFB, 0xFC,
0xFD, 0xFE.
(3) A range address like "/foo/,14" is supposed to match every line
from the first occurrence of "foo" until line 14, inclusive, and
then match only those lines containing "foo" thereafter. In gsed
v2.05, if "foo" occurs later in the file, every line from there to
the end of file will be matched (since gsed is looking for line 14
to occur again!).
(4) The regexes /\`/ and /\'/ are not interpreted as a backquote
and apostrophe, as might be expected. Instead, they are used to
represent the beginning-of-line and end-of-line (respectively), to
conform with similar regexes in the GNU versions of Emacs and awk.
As a consequence, there is no clear way to indicate an apostrophe,
since a bare apostrophe (') has special meaning to the Unix shell
and the quoted apostrophe (\') is interpreted as the EOL. A
double-quote apostrophe (\\') was interpreted as a backslash to sed
and a quote mark to the shell--again, not providing the expected
results. This syntax changed in the next version of gsed.
(5) Multiple occurrences of the 'w' command fail, as shown here,
given that both "aaa" and "bbb" occur within the file:
gsed -e "/aaa/w FILE" -e "/bbb/w FILE" input.txt
(6) The expression "\<" causes problems when attempting the
following type of substitution, which should print "+aaa +bbb":
echo aaa bbb | sed 's/\</+/g' # sed hangs up with no output
The syntax 's/\<./+&/g' issues the proper output.
7.6. GNU sed v1.18
(1) Same as #1 for GNU sed v2.05, above.
(2) The following command will lock the computer under Win95. Echos
is an echo command that does not issue a trailing newline:
echos any_word | gsed "s/[ ]*$//"
(3) Same as #3 for GNU sed v2.05, above.
7.7. GNU sed v1.03 (by Frank Whaley)
(1) The \w and \W escape sequences both match only nonword
characters. \w is misdefined and should match word characters.
(2) The underscore is defined as a nonword character; it should be
defined as a word character.
(3) same as #3 for GNU sed v2.05, above.
7.8. sed v1.6 (by Walter Briscoe) - still in beta version
(1) Duplicated subexpressions (still) do not match an empty set as
they should. This problem was inherited from HHsed15.
echo 123 | sed "s/\([a-z][a-z]\)*/=\1/" # does not return '='
(2) If grouping is followed by a + operator, nothing is matched.
This problem was inherited from HHsed; it fixed a bug with the *
operator, but the problem with the + operator persists.
echo aaa | sed "/\(a\)+/d" # nothing is deleted.
(3) With the interval expressions \{1,\} and +, there is a bug
related to the & replacement character. This affected the BETA
release, and it's not known if it affects the final release.
echo ab | sed "s/a[^a]*/&c/" # returns 'abc'. Okay.
echo ab | sed "s/a[^a]+/&c/" # returns 'ab'. Bug!
echo ab | sed "s/a[^a]\{1,\}/&c/" # returns 'ab'. Bug!
7.9. HHsed v1.5 (by Howard Helman)
(1) If a number follows the substitute command (e.g., s/foo/bar/2),
in a sed script entered from the command line, two semicolons must
follow the number, or they must be separated by an -e switch.
Normally, only 1 semicolon is needed to separate commands.
echo bit bet | HHsed "s/b/n/2;;s/b/B/" # solution 1
echo bit bet | HHsed -e "s/b/n/2" -e "s/b/B" # solution 2
(2) If the substitute command is followed by a number and a "p"
flag, when the -n switch is used, the "p" flag must occur first.
echo aaa | HHsed -n "s/./B/3p" # bug! nothing prints
echo aaa | HHsed -n "s/./B/p3" # prints "aaB" as expected
(3) The following commands will cause HHsed to lock the computer
under MS-DOS or Win95. Note that they occur because of malformed
regular expressions which will match no characters.
sed -n "p;s/\<//g;" file
sed -n "p;s/[char-set]*//g;" file
(4) The range command '/RE1/,/RE2/' in HHsed will match one line if
both regexes occur on the same line (see section 3.4(3), above).
Though this could be construed as a feature, it should probably be
considered a bug since its operation differs from every other
version of sed. For example, '/----/,/----/{s/^/>>/;}' should put
two angle brackets ">>" before every line which is sandwiched
between a row of 4 or more hyphens. With HHsed, this command will
only prefix the hyphens themselves with the angle brackets.
(5) If the hold space is empty, the H command copies the pattern
space to the hold space but fails to prepend a leading newline. The
H command is supposed to add a newline, followed by the contents of
the pattern space, to the hold space at all times. A workaround is
"{G;s/^\(.*\)\(\n\)$/\2\1/;H;s/\n$//;}", but it requires knowing
that the hold space is empty and using the command only once.
Another alternative is to use the G or the h command alone at key
points in the script.
(6) If grouping is followed by an '*' or '+' operator, HHsed does
not match the pattern, but issues no warning. See below:
echo aaa | HHsed "/\(a\)*/d" # nothing is deleted
echo aaa | HHsed "/\(a\)+/d" # nothing is deleted
echo aaa | HHsed "s/\(a\)*/\1B/" # nothing is changed
echo aaa | HHsed "s/\(a\)+/\1B/" # nothing is changed
(7) If grouping is followed by an interval expression, HHsed halts
with the error message "garbled command", in all of the following
examples:
echo aaa | HHsed "/\(a\)\{3\}/d"
echo aaa | HHsed "/\(a\)\{1,5\}/d"
echo aaa | HHsed "s/\(a\)\{3\}/\1B/"
(8) In interval expressions, 0 is not supported. E.g., \{0,3\)
7.10. sedmod v1.0 (by Hern Chen)
Technically, the following are limits (or features?) of sedmod, not
bugs, since the docs for sedmod do not claim to support these
missing features.
(1) sedmod does not support standard interval expressions \{...\}
present in nearly all versions of sed.
(2) If grouping is followed by an '*' or '+' operator, sedmod gives
a "garbled command" message. However, if the grouped expressions
are strings literals with no metacharacters, a partial workaround
can be done like so:
\(string\)\1* # matches 1 or more instances of 'string'
\(string\)\1+ # matches 2 or more instances of 'string'
(3) sedmod does not support a numeric argument after the s///
command, as in 's/a/b/3', present in nearly all versions of sed.
The following are bugs in sedmod v1.0:
(4) When the -i (ignore case) switch is used, the '/regex/d'
command is not properly obeyed. Sedmod may miss one or more lines
matching the expression, regardless of where they occur in the
script. Workaround: use "/regex/{d;}" instead.
7.11. HP-UX sed
(1) Versions of HP-UX sed up to and including version 10.20 are
buggy. According to the README file, which comes with the GNU cc
at <ftp://ftp.ntua.gr/pub/gnu/sed/sed-2.05.bin.README>:
"When building gcc on a hppa*-*-hpux10 platform, the `fixincludes'
step (which involves running a sed script) fails because of a bug
in the vendor's implementation of sed. Currently the only known
workaround is to install GNU sed before building gcc. The file
sed-2.05.bin.hpux10 is a precompiled binary for that platform."
7.12. SunOS sed v4.1
(1) Bug occurs in RE pattern matching when a non-null '[char-set]*'
is followed by a null '\NUM' pattern recall, illustrated here and
reported by Greg Ubben:
s/\(a\)\(b*\)cd\1[0-9]*\2foo/bar/ # between '[0-9]*' and '\2'
s/\(a\{0,1\}\).\{0,1\}\1/bar/ # between '.\{0,1\}' and '\1'
Workaround: add a do-nothing 'X*' expression which will not match
any characters on the line between the two components. E.g.,
s/\(a\)\(b*\)cd\1[0-9]*X*\2foo/bar/
s/\(a\{0,1\}\).\{0,1\}X*\1/bar/
7.13. SunOS sed v5.6
(1) If grouping is followed by an asterisk, SunOS sed does not match
the null string, which it should do. The following command:
echo foo | sed 's/f\(NO-MATCH\)*/g\1/'
should transform "foo" to "goo" under normal versions of sed.
7.14. Ultrix sed v4.3
(1) If grouping is followed by an asterisk, Ultrix sed replies with
"command garbled", as shown in the following example:
echo foo | sed 's/f\(NO-MATCH\)*/g\1/'
(2) If grouping is followed by a numeric operator such as \{0,9\},
Ultrix sed does not find the match.
7.15. Digital Unix sed
(1) The following comes from the man pages for sed distributed with
new, 1998 versions of Digital Unix (reformatted to fit our
margins):
[Digital] The h subcommand for sed does not work properly. When
you use the h subcommand to place text into the hold area, only
the last line of the specified text is saved. You can use the H
subcommand to append text to the hold area. The H subcommand and
all others dealing with the hold area work correctly.
(2) "$d" command issues an error message, "cannot parse". Reported
by Carlos Duarte on 8 June 1998.
[end-of-file]