Add 's390-tools' Provides to all packages

The upstream name of this is 's390-tools', and nearly all
other Linux distributions ship it as such. Make life easier
for people by also providing this name.

.gitignore

@@ -6,3 +6,4 @@ src_vipa-2.0.4.tar.gz
 /src_vipa-2.1.0.tar.gz
 /s390-tools-*.tar.bz2
 /s390-tools-*.tar.gz
+/s390-tools-*-rust-vendor.tar.xz

20-zipl-kernel.install

@@ -54,21 +54,25 @@ EOF
 case "$COMMAND" in
     add)
         if [[ "${KERNEL_DIR}" != "/boot" ]]; then
+            # rename to match the name used in the pseudo-BLS snippet above
+            cp --remove-destination --preserve=timestamps -T "${KERNEL_IMAGE}" "/boot/vmlinuz-${KERNEL_VERSION}"
+            command -v restorecon &>/dev/null && \
+                restorecon -R "/boot/vmlinuz-${KERNEL_VERSION}"
+
             for i in \
-                "$KERNEL_IMAGE" \
                     "$KERNEL_DIR"/System.map \
                     "$KERNEL_DIR"/config \
                     "$KERNEL_DIR"/zImage.stub
             do
                 [[ -e "$i" ]] || continue
-                cp -aT "$i" "/boot/${i##*/}-${KERNEL_VERSION}"
+                cp --preserve=timestamps -T "$i" "/boot/${i##*/}-${KERNEL_VERSION}"
                 command -v restorecon &>/dev/null && \
                     restorecon -R "/boot/${i##*/}-${KERNEL_VERSION}"
             done
             # hmac is .vmlinuz-<version>.hmac so needs a special treatment
             i="$KERNEL_DIR/.${KERNEL_IMAGE##*/}.hmac"
             if [[ -e "$i" ]]; then
-                cp -a "$i" "/boot/.${KERNEL_IMAGE##*/}-${KERNEL_VERSION}.hmac"
+                cp --preserve=timestamps "$i" "/boot/.${KERNEL_IMAGE##*/}-${KERNEL_VERSION}.hmac"
                 command -v restorecon &>/dev/null && \
                     restorecon "/boot/.${KERNEL_IMAGE##*/}-${KERNEL_VERSION}.hmac"
             fi
@@ -91,7 +95,7 @@ case "$COMMAND" in
             [[ -d "$BLS_DIR" ]] || mkdir -m 0700 -p "$BLS_DIR"
             BLS_TARGET="${BLS_DIR}/${MACHINE_ID}-${KERNEL_VERSION}.conf"
             if [[ -f "${KERNEL_DIR}/bls.conf" ]]; then
-                cp -aT "${KERNEL_DIR}/bls.conf" "${BLS_TARGET}" || exit $?
+                cp --preserve=timestamps -T "${KERNEL_DIR}/bls.conf" "${BLS_TARGET}" || exit $?
                 sed -i -e "s,^linux.*,linux /boot/vmlinuz-${KERNEL_VERSION},g" "${BLS_TARGET}"
                 sed -i -e "s,^initrd.*,initrd /boot/initramfs-${KERNEL_VERSION}.img,g" "${BLS_TARGET}"
                 sed -i -e "s#^options.*#options ${BOOT_OPTIONS[*]}#g" "${BLS_TARGET}"
@@ -112,7 +116,7 @@ case "$COMMAND" in
 
             if [ "x${MAKEDEBUG}" = "xyes" ]; then
                 BLS_DEBUG="$(echo ${BLS_TARGET} | sed -e "s/${KERNEL_VERSION}/${KERNEL_VERSION}~debug/")"
-                cp -aT  "${BLS_TARGET}" "${BLS_DEBUG}"
+                cp --preserve=timestamps -T  "${BLS_TARGET}" "${BLS_DEBUG}"
                 TITLE="$(grep '^title[ \t]' "${BLS_DEBUG}" | sed -e 's/^title[ \t]*//')"
 		VERSION="$(grep '^version[ \t]' "${BLS_DEBUG}" | sed -e 's/^version[ \t]*//')"
                 BLSID="$(grep '^id[ \t]' "${BLS_DEBUG}" | sed -e "s/${KERNEL_VERSION}/${KERNEL_VERSION}~debug/")"

rpminspect.yaml

@@ -0,0 +1,8 @@
+---
+pathmigration:
+    excluded_paths:
+        - /lib/s390-tools
+
+badfuncs:
+    ignore:
+        - /usr/sbin/qethqoat

s390-tools-zipl-blscfg-rpm-nvr-sort.patch

@@ -1,4 +1,4 @@
-From a17c57bf2b7b6d64a509cb5fb02fe46849bc550c Mon Sep 17 00:00:00 2001
+From b2daaa34776ba6afec879e362378f6f7563590a6 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
 Date: Mon, 20 Jun 2022 17:43:05 +0200
 Subject: [PATCH 1/2] Revert "zipl/src: Implement sorting bls entries by
@@ -194,10 +194,10 @@ index 0cea1d4..9352f76 100644
  		return n;
  
 -- 
-2.37.3
+2.39.2
 
 
-From 7a51cfc15b870d90bffe1e24a1da922663ffe1d7 Mon Sep 17 00:00:00 2001
+From 692e70bcfc32a05e30146bd7077c41e0eaceff03 Mon Sep 17 00:00:00 2001
 From: Peter Jones <pjones@redhat.com>
 Date: Mon, 20 Jun 2022 17:46:59 +0200
 Subject: [PATCH 2/2] blscfg: sort like rpm nvr, not like a single version
@@ -213,7 +213,7 @@ Signed-off-by: Dan Horák <dan@danny.cz>
  2 files changed, 95 insertions(+), 2 deletions(-)
 
 diff --git a/zipl/src/Makefile b/zipl/src/Makefile
-index 64eabe4..7043005 100644
+index cab5655..7ec215d 100644
 --- a/zipl/src/Makefile
 +++ b/zipl/src/Makefile
 @@ -9,6 +9,7 @@ ALL_LDFLAGS += -Wl,-z,noexecstack $(NO_PIE_LDFLAGS)
@@ -223,7 +223,7 @@ index 64eabe4..7043005 100644
 +	-lrpmio -lrpm
  
  objects = misc.o error.o scan.o job.o boot.o bootmap.o fs-map.o disk.o \
- 	  bootmap_header.o envblk.o install.o zipl.o $(rootdir)/zipl/boot/data.o
+ 	  bootmap_header.o envblk.o install.o zipl.o
 diff --git a/zipl/src/scan.c b/zipl/src/scan.c
 index 9352f76..3327e2d 100644
 --- a/zipl/src/scan.c
@@ -344,5 +344,5 @@ index 9352f76..3327e2d 100644
  static int
  scan_append_section_heading(struct scan_token* scan, int* index, char* name);
 -- 
-2.37.3
+2.39.2
 

s390utils-2.25.0-fedora.patch

@@ -1,77 +0,0 @@
-From d721eb018973842a432869f6f9efd5752b2e7f19 Mon Sep 17 00:00:00 2001
-From: Marc Hartmayer <mhartmay@linux.ibm.com>
-Date: Mon, 19 Dec 2022 09:51:51 +0000
-Subject: [PATCH 1/2] zgetdump/Makefile: don't use `.check_dep_zgetdump` as
- linker input
-
-The `.check_dep_zgetdump` file is used to cache the result of the
-dependency checks and should not be used as input for linking or
-anything else. Let's add it as dependency for the objects file. This
-shouldn't cause any problems since the Makefile rule for object files is
-defined in `common.mak` as follows:
-
-%.o: %.c
-	$(CC) $(ALL_CPPFLAGS) $(ALL_CFLAGS) -c $< -o $@
-
-Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/147
-Fixes: 8d8d5e9746a4 ("zdump: Fix Makefile dependencies")
-Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
-Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
-Signed-off-by: Jan Hoeppner <hoeppner@linux.ibm.com>
----
- zdump/Makefile | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/zdump/Makefile b/zdump/Makefile
-index ca8aadc..934dc47 100644
---- a/zdump/Makefile
-+++ b/zdump/Makefile
-@@ -119,7 +119,9 @@ libs = $(rootdir)/libutil/libutil.a $(LIBPV)
- 
- all: $(BUILD_TARGETS)
- 
--zgetdump: .check_dep_zgetdump $(OBJECTS) $(libs)
-+$(OBJECTS): .check_dep_zgetdump
-+
-+zgetdump: $(OBJECTS) $(libs)
- 
- skip-zgetdump:
- 	echo "  SKIP    zgetdump due to unresolved dependencies"
--- 
-2.39.1
-
-
-From d9f54f76e2e6f17e0b5bafdc0d09ff0e72edd474 Mon Sep 17 00:00:00 2001
-From: Ingo Franzki <ifranzki@linux.ibm.com>
-Date: Fri, 20 Jan 2023 11:04:18 +0100
-Subject: [PATCH 2/2] zkey: Support EP11 host library version 4
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Try to load libep11.so.4 if available, but fallback to older
-library versions if not.
-
-Reviewed-by: Jörg Schmidbauer <jschmidb@de.ibm.com>
-Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
-Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
----
- zkey/ep11.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/zkey/ep11.c b/zkey/ep11.c
-index 58dc3c5..8359929 100644
---- a/zkey/ep11.c
-+++ b/zkey/ep11.c
-@@ -35,7 +35,7 @@
-  * Definitions for the EP11 library
-  */
- #define EP11_LIBRARY_NAME	"libep11.so"
--#define EP11_LIBRARY_VERSION	3
-+#define EP11_LIBRARY_VERSION	4
- #define EP11_WEB_PAGE		"http://www.ibm.com/security/cryptocards"
- 
- /**
--- 
-2.39.1
-

s390utils.spec

@@ -1,21 +1,30 @@
 # secure boot support is for RHEL only
 %if 0%{?rhel} >= 8
-%global signzipl 1
+%bcond_without signzipl
+%else
+%bcond_with signzipl
 %endif
 
 %if 0%{?fedora}
-%global with_pandoc 1
+%bcond_without pandoc
+%else
+%bcond_with pandoc
 %endif
 
 Name:           s390utils
 Summary:        Utilities and daemons for IBM z Systems
-Version:        2.25.0
-Release:        4%{?dist}
+Version:        2.31.0
+Release:        2%{?dist}
 Epoch:          2
-License:        MIT
-ExclusiveArch:  s390 s390x
+# MIT covers nearly all the files, except init files
+License:        MIT AND LGPL-2.1-or-later
 URL:            https://github.com/ibm-s390-linux/s390-tools
 Source0:        https://github.com/ibm-s390-linux/s390-tools/archive/v%{version}.tar.gz#/s390-tools-%{version}.tar.gz
+# To create the vendor tarball:
+#   tar xf s390-tools-%%{version}.tar.gz ; pushd s390-tools-%%{version}/rust ; \
+#   rm -f Cargo.lock && cargo vendor && \
+#   tar Jvcf ../../s390-tools-%%{version}-rust-vendor.tar.xz vendor/ ; popd
+Source1:        s390-tools-%{version}-rust-vendor.tar.xz
 Source5:        https://fedorapeople.org/cgit/sharkcz/public_git/utils.git/tree/zfcpconf.sh
 Source7:        https://fedorapeople.org/cgit/sharkcz/public_git/utils.git/tree/zfcp.udev
 Source12:       https://fedorapeople.org/cgit/sharkcz/public_git/utils.git/tree/dasd.udev
@@ -29,7 +38,7 @@ Source23:       20-zipl-kernel.install
 Source24:       52-zipl-rescue.install
 Source25:       91-zipl.install
 
-%if 0%{?signzipl}
+%if %{with signzipl}
 %define pesign_name redhatsecureboot302
 %endif
 
@@ -38,8 +47,18 @@ Patch0:         s390-tools-zipl-invert-script-options.patch
 Patch1:         s390-tools-zipl-blscfg-rpm-nvr-sort.patch
 
 # upstream fixes/updates
-Patch100:       s390utils-%%{version}-fedora.patch
+#Patch100:       s390utils-%%{version}-fedora.patch
 
+# https://fedoraproject.org/wiki/Changes/EncourageI686LeafRemoval
+ExcludeArch:    %{ix86}
+
+# Add Provides for upstream name
+Provides:       s390-tools = %{epoch}:%{version}-%{release}
+
+%ifarch s390x
+#
+# s390x/native package structure
+#
 Requires:       s390utils-core = %{epoch}:%{version}-%{release}
 Requires:       s390utils-base = %{epoch}:%{version}-%{release}
 Requires:       s390utils-osasnmpd = %{epoch}:%{version}-%{release}
@@ -47,9 +66,48 @@ Requires:       s390utils-cpuplugd = %{epoch}:%{version}-%{release}
 Requires:       s390utils-mon_statd = %{epoch}:%{version}-%{release}
 Requires:       s390utils-iucvterm = %{epoch}:%{version}-%{release}
 Requires:       s390utils-ziomon = %{epoch}:%{version}-%{release}
+%else
+#
+# multiarch package structure
+#
+Requires:       s390utils-se-data = %{epoch}:%{version}-%{release}
+%endif
 
 BuildRequires:  make
 BuildRequires:  gcc-c++
+BuildRequires:  glib2-devel
+%if 0%{?rhel}
+BuildRequires:  libcurl-devel
+BuildRequires:  openssl-devel
+BuildRequires:  rust-toolset
+%else
+BuildRequires:  crate(anstream)
+BuildRequires:  crate(anstyle-query)
+BuildRequires:  crate(anyhow)
+BuildRequires:  crate(byteorder)
+BuildRequires:  crate(cfg-if)
+BuildRequires:  crate(clap)
+BuildRequires:  crate(clap_complete)
+BuildRequires:  crate(clap_derive)
+BuildRequires:  crate(colorchoice)
+BuildRequires:  crate(curl)
+BuildRequires:  crate(is-terminal)
+BuildRequires:  crate(lazy_static)
+BuildRequires:  crate(libc)
+BuildRequires:  crate(log)
+BuildRequires:  crate(mockito)
+BuildRequires:  crate(openssl)
+BuildRequires:  crate(openssl-probe)
+BuildRequires:  crate(serde)
+BuildRequires:  crate(serde_derive)
+BuildRequires:  crate(serde_test)
+BuildRequires:  crate(serde_yaml)
+BuildRequires:  crate(strsim)
+BuildRequires:  crate(terminal_size)
+BuildRequires:  crate(thiserror)
+BuildRequires:  crate(zerocopy)
+BuildRequires:  rust-packaging
+%endif
 
 %description
 This is a meta package for installing the default s390-tools sub packages.
@@ -60,27 +118,22 @@ The s390utils packages contain a set of user space utilities that should to
 be used together with the zSeries (s390) Linux kernel and device drivers.
 
 %prep
-%setup -q -n s390-tools-%{version}
-
-# Fedora/RHEL changes
-%patch0 -p1 -b .zipl-invert-script-options
-%patch1 -p1 -b .blscfg-rpm-nvr-sort
-
-# upstream fixes/updates
-%patch100 -p1
-
-# drop -Werror from genprotimg to allow building with GCC 12
-sed -i.bak -e 's/-Werror//g' genprotimg/src/Makefile genprotimg/boot/Makefile
-
-# remove --strip from install
-find . -name Makefile | xargs sed -i 's/$(INSTALL) -s/$(INSTALL)/g'
+%autosetup -n s390-tools-%{version} -p1
 
+%if 0%{?rhel}
+pushd rust
+%cargo_prep -V 1
+popd
+%else
+%cargo_prep
+%endif
+rm ./rust/Cargo.lock
 
 %build
 make \
         CFLAGS="%{build_cflags}" CXXFLAGS="%{build_cxxflags}" LDFLAGS="%{build_ldflags}" \
         HAVE_DRACUT=1 \
-%if 0%{?with_pandoc}
+%if %{with pandoc}
         ENABLE_DOC=1 \
 %endif
         NO_PIE_LDFLAGS="" \
@@ -92,7 +145,7 @@ make \
 %install
 make install \
         HAVE_DRACUT=1 \
-%if 0%{?with_pandoc}
+%if %{with pandoc}
         ENABLE_DOC=1 \
 %endif
         DESTDIR=%{buildroot} \
@@ -101,8 +154,12 @@ make install \
         DISTRELEASE=%{release} \
         V=1
 
+%ifarch s390x
+#
+# s390x/native specific %%install section
+#
 # sign the stage3 bootloader
-%if 0%{?signzipl}
+%if %{with signzipl}
 if [ -x /usr/bin/rpm-sign ]; then
     pushd %{buildroot}/lib/s390-tools/
         rpm-sign --key "%{pesign_name}" --lkmsign stage3.bin --output stage3.signed
@@ -160,17 +217,61 @@ install -p -m 644 %{SOURCE17} %{buildroot}%{_udevrulesdir}/81-ccw.rules
 
 # zipl.conf to be ghosted
 touch %{buildroot}%{_sysconfdir}/zipl.conf
+%endif
 
-
+%ifarch s390x
+#
+# s390x/native main %%files section
+#
 %files
 %doc README.md
 
+%else
+#
+# multiarch %%files section
+#
+
+%files
+%doc README.md
+%license LICENSE
+%{_bindir}/genprotimg
+%{_bindir}/pvapconfig
+%{_bindir}/pvattest
+%{_bindir}/pvextract-hdr
+%{_bindir}/pvsecret
+%{_mandir}/man1/genprotimg.1*
+%{_mandir}/man1/pvapconfig.1*
+%{_mandir}/man1/pvattest.1*
+%{_mandir}/man1/pvattest-create.1*
+%{_mandir}/man1/pvattest-perform.1*
+%{_mandir}/man1/pvattest-verify.1*
+%{_mandir}/man1/pvsecret-add.1*
+%{_mandir}/man1/pvsecret-create-association.1*
+%{_mandir}/man1/pvsecret-create-meta.1*
+%{_mandir}/man1/pvsecret-create.1*
+%{_mandir}/man1/pvsecret-list.1*
+%{_mandir}/man1/pvsecret-lock.1*
+%{_mandir}/man1/pvsecret-verify.1*
+%{_mandir}/man1/pvsecret.1*
+%dir %{_datadir}/s390-tools
+%{_datadir}/s390-tools/genprotimg/
+
+#
+# enf of multi-arch section
+#
+%endif
+
+%ifarch s390x
+#
+# s390x specific sub-packages
+#
 #
 # ************************* s390-tools core package  *************************
 #
 %package core
 License:        MIT
 Summary:        S390 core tools
+Provides:       s390-tools-core = %{epoch}:%{version}-%{release}
 Requires:       coreutils
 %{?systemd_requires}
 # BRs are covered via the base package
@@ -192,7 +293,7 @@ This package provides minimal set of tools needed to system to boot.
 
 %files core
 %doc README.md zdev/src/chzdev_usage.txt
-%doc LICENSE
+%license LICENSE
 %{_sbindir}/chreipl
 %{_sbindir}/chzdev
 %{_sbindir}/cio_ignore
@@ -208,13 +309,17 @@ This package provides minimal set of tools needed to system to boot.
 /lib/s390-tools/cpictl
 /lib/s390-tools/stage3.bin
 /lib/s390-tools/zdev_id
+/lib/s390-tools/zdev-from-dasd_mod.dasd
 /lib/s390-tools/zdev-root-update
+/lib/s390-tools/zdev-to-dasd_mod.dasd
+/lib/s390-tools/zdev-to-rd.znet
 /lib/s390-tools/zipl.conf
 %ghost %config(noreplace) %{_sysconfdir}/zipl.conf
 %config(noreplace) %{_sysconfdir}/ziplenv
 %{_unitdir}/cpi.service
 %config(noreplace) %{_sysconfdir}/sysconfig/cpi
 /usr/lib/dracut/modules.d/95zdev/
+/usr/lib/dracut/modules.d/95zdev-kdump/
 %{_mandir}/man5/zipl.conf.5*
 %{_mandir}/man8/chreipl.8*
 %{_mandir}/man8/chzdev.8*
@@ -259,14 +364,16 @@ This package provides minimal set of tools needed to system to boot.
 #
 
 %package base
-License:        MIT
+License:        MIT AND LGPL-2.1-or-later
 Summary:        S390 base tools
+Provides:       s390-tools-base = %{epoch}:%{version}-%{release}
 Requires:       gawk sed coreutils
 Requires:       sg3_utils
 Requires:       ethtool
 Requires:       tar
 Requires:       file
 Requires:       s390utils-core = %{epoch}:%{version}-%{release}
+Requires:       s390utils-se-data = %{epoch}:%{version}-%{release}
 %{?systemd_requires}
 BuildRequires:  perl-generators
 BuildRequires:  ncurses-devel
@@ -274,7 +381,6 @@ BuildRequires:  glibc-static
 BuildRequires:  cryptsetup-devel >= 2.0.3
 BuildRequires:  json-c-devel
 BuildRequires:  rpm-devel
-BuildRequires:  glib2-devel
 BuildRequires:  libxml2-devel
 
 
@@ -340,11 +446,6 @@ s390 base tools. This collection provides the following utilities:
    * tunedasd:
      Adjust tunable parameters on DASD devices.
 
-   * vmconvert:
-     Convert system dumps created by the z/VM VMDUMP command into dumps with
-     LKCD format. These LKCD dumps can then be analyzed with the dump analysis
-     tool lcrash.
-
    * vmcp:
      Allows Linux users to send commands to the z/VM control program (CP).
      The normal usage is to invoke vmcp with the command you want to
@@ -444,8 +545,9 @@ getent group zkeyadm > /dev/null || groupadd -r zkeyadm
 %{_sbindir}/lscss
 %{_sbindir}/lsdasd
 %{_sbindir}/lshwc
-%{_sbindir}/lsqeth
 %{_sbindir}/lsluns
+%{_sbindir}/lsqeth
+%{_sbindir}/lspai
 %{_sbindir}/lsreipl
 %{_sbindir}/lsscm
 %{_sbindir}/lsshut
@@ -475,10 +577,11 @@ getent group zkeyadm > /dev/null || groupadd -r zkeyadm
 %{_sbindir}/zpcictl
 %{_bindir}/dump2tar
 %{_bindir}/genprotimg
+%{_bindir}/pvapconfig
 %{_bindir}/mk-s390image
 %{_bindir}/pvattest
 %{_bindir}/pvextract-hdr
-%{_bindir}/vmconvert
+%{_bindir}/pvsecret
 %{_bindir}/zkey
 %{_bindir}/zkey-cryptsetup
 %{_unitdir}/dumpconf.service
@@ -503,11 +606,19 @@ getent group zkeyadm > /dev/null || groupadd -r zkeyadm
 %{_libdir}/zkey/zkey-kmip.so
 %{_mandir}/man1/dump2tar.1*
 %{_mandir}/man1/genprotimg.1*
+%{_mandir}/man1/pvapconfig.1*
 %{_mandir}/man1/pvattest.1*
 %{_mandir}/man1/pvattest-create.1*
 %{_mandir}/man1/pvattest-perform.1*
 %{_mandir}/man1/pvattest-verify.1*
-%{_mandir}/man1/vmconvert.1*
+%{_mandir}/man1/pvsecret-add.1*
+%{_mandir}/man1/pvsecret-create-association.1*
+%{_mandir}/man1/pvsecret-create-meta.1*
+%{_mandir}/man1/pvsecret-create.1*
+%{_mandir}/man1/pvsecret-list.1*
+%{_mandir}/man1/pvsecret-lock.1*
+%{_mandir}/man1/pvsecret-verify.1*
+%{_mandir}/man1/pvsecret.1*
 %{_mandir}/man1/zkey.1*
 %{_mandir}/man1/zkey-cryptsetup.1*
 %{_mandir}/man1/zkey-ekmfweb.1*
@@ -532,6 +643,7 @@ getent group zkeyadm > /dev/null || groupadd -r zkeyadm
 %{_mandir}/man8/lsdasd.8*
 %{_mandir}/man8/lshwc.8*
 %{_mandir}/man8/lsluns.8*
+%{_mandir}/man8/lspai.8*
 %{_mandir}/man8/lsqeth.8*
 %{_mandir}/man8/lsreipl.8*
 %{_mandir}/man8/lsscm.8*
@@ -557,7 +669,6 @@ getent group zkeyadm > /dev/null || groupadd -r zkeyadm
 %{_mandir}/man8/znetconf.8*
 %{_mandir}/man8/zpcictl.8*
 %dir %{_datadir}/s390-tools
-%{_datadir}/s390-tools/genprotimg/
 %{_datadir}/s390-tools/netboot/
 %dir %attr(0770,root,zkeyadm) %{_sysconfdir}/zkey
 %dir %attr(0770,root,zkeyadm) %{_sysconfdir}/zkey/kmip
@@ -569,11 +680,25 @@ getent group zkeyadm > /dev/null || groupadd -r zkeyadm
 # Additional Fedora/RHEL specific stuff
 /boot/tape0
 
+%package se-data
+License:        MIT
+Summary:        Data for Secure Execution
+Provides:       s390-tools-se-data = %{epoch}:%{version}-%{release}
+BuildArch:      noarch
+
+%description se-data
+%{summary}.
+
+%files se-data
+%dir %{_datadir}/s390-tools
+%{_datadir}/s390-tools/genprotimg/
+
 #
 # *********************** s390-tools osasnmpd package  ***********************
 #
 %package osasnmpd
 Summary:        SNMP sub-agent for OSA-Express cards
+Provides:       s390-tools-osasnmpd = %{epoch}:%{version}-%{release}
 Requires:       net-snmp
 Requires:       psmisc
 BuildRequires:  net-snmp-devel
@@ -593,6 +718,7 @@ ATM Ethernet LAN Emulation in QDIO mode.
 #
 %package mon_statd
 Summary:         Monitoring daemons for Linux in z/VM
+Provides:        s390-tools-mon_statd = %{epoch}:%{version}-%{release}
 Requires:        coreutils
 %{?systemd_requires}
 
@@ -632,6 +758,7 @@ Monitoring daemons for Linux in z/VM:
 #
 %package cpuplugd
 Summary:         Daemon that manages CPU and memory resources
+Provides:        s390-tools-cpuplugd = %{epoch}:%{version}-%{release}
 %{?systemd_requires}
 BuildRequires: systemd
 
@@ -661,6 +788,7 @@ memory can be increased or decreased exploiting the CMM1 feature.
 #
 %package ziomon
 Summary:        S390 ziomon tools
+Provides:       s390-tools-ziomon = %{epoch}:%{version}-%{release}
 Requires:       blktrace
 Requires:       coreutils
 Requires:       device-mapper-multipath
@@ -699,6 +827,7 @@ Tool set to collect data for zfcp performance analysis and report.
 #
 %package iucvterm
 Summary:        z/VM IUCV terminal applications
+Provides:       s390-tools-iucvterm = %{epoch}:%{version}-%{release}
 Requires(pre):  shadow-utils
 Requires(post): grep
 Requires(postun): grep
@@ -763,6 +892,7 @@ fi
 Summary:        CMS file system based on FUSE
 BuildRequires:  fuse3-devel
 Requires:       fuse3
+Provides:       s390-tools-cmsfs-fuse = %{epoch}:%{version}-%{release}
 Requires:       glibc-gconv-extra
 Obsoletes:      %{name}-cmsfs < 2:2.7.0-3
 
@@ -783,6 +913,7 @@ Summary:        z/OS data set access based on FUSE
 BuildRequires:  fuse3-devel
 BuildRequires:  libcurl-devel
 Requires:       fuse3
+Provides:       s390-tools-zdsfs = %{epoch}:%{version}-%{release}
 
 %description zdsfs
 This package contains the z/OS data set access based on FUSE.
@@ -798,6 +929,7 @@ This package contains the z/OS data set access based on FUSE.
 Summary:       HMC drive file system based on FUSE
 BuildRequires: fuse3-devel
 Requires:      fuse3
+Provides:      s390-tools-hmcdrvfs = %{epoch}:%{version}-%{release}
 
 %description hmcdrvfs
 This package contains a HMC drive file system based on FUSE and a tool
@@ -814,6 +946,7 @@ to list files and directories.
 #
 %package cpacfstatsd
 Summary:       Monitor and maintain CPACF activity counters
+Provides:      s390-tools-cpacfstatsd = %{epoch}:%{version}-%{release}
 Requires(post): systemd
 Requires(preun): systemd
 Requires(postun): systemd
@@ -852,12 +985,13 @@ Summary:          Use multipath information for re-IPL path failover
 BuildRequires:    make
 BuildRequires:    bash
 BuildRequires:    coreutils
-%if 0%{?with_pandoc}
+%if %{with pandoc}
 BuildRequires:    pandoc
 %endif
 BuildRequires:    gawk
 BuildRequires:    gzip
 BuildRequires:    sed
+Provides:         s390-tools-chreipl-fcp-mpath = %{epoch}:%{version}-%{release}
 Requires:         bash
 Requires:         coreutils
 Requires:         util-linux
@@ -873,7 +1007,7 @@ reconfigures the FCP re-IPL settings to use an operational path.
 
 %files chreipl-fcp-mpath
 %doc chreipl-fcp-mpath/README.md
-%if 0%{?with_pandoc}
+%if %{with pandoc}
 %doc chreipl-fcp-mpath/README.html
 %endif
 %dir %{_prefix}/lib/chreipl-fcp-mpath/
@@ -892,7 +1026,7 @@ reconfigures the FCP re-IPL settings to use an operational path.
 #
 %package devel
 Summary:        Development files
-
+Provides: s390-tools-devel = %{epoch}:%{version}-%{release}
 Requires: %{name}-base%{?_isa} = %{epoch}:%{version}-%{release}
 
 %description devel
@@ -905,8 +1039,58 @@ User-space development files for the s390/s390x architecture.
 %{_libdir}/libekmfweb.so
 %{_libdir}/libkmipclient.so
 
+#
+# end of s390x specific sub-packages
+#
+%endif
+
 
 %changelog
+* Fri Mar 08 2024 Neal Gompa <ngompa@fedoraproject.org> - 2:2.31.0-2
+- Add 's390-tools' Provides to all packages
+
+* Mon Feb 05 2024 Dan Horák <dan[at]danny.cz> - 2:2.31.0-1
+- rebased to 2.31.0 (rhbz#2262499)
+
+* Thu Jan 25 2024 Dan Horák <dan[at]danny.cz> - 2:2.30.0-2
+- add s390utils-se-data as a noarch subpackage with Secure Execution data files
+
+* Tue Jan 02 2024 Dan Horák <dan[at]danny.cz> - 2:2.30.0-1
+- rebased to 2.30.0 (rhbz#2252519)
+
+* Fri Dec 01 2023 Fabio Valentini <decathorpe@gmail.com> - 2:2.29.0-6
+- Rebuild for openssl crate >= v0.10.60 (RUSTSEC-2023-0044, RUSTSEC-2023-0072)
+
+* Fri Nov 10 2023 Dan Horák <dan[at]danny.cz> - 2:2.29.0-5
+- enable multi-arch build
+
+* Fri Nov 10 2023 Dan Horák <dan[at]danny.cz> - 2:2.29.0-4
+- fix upstream kernel installations
+
+* Mon Oct 23 2023 Yaakov Selkowitz <yselkowi@redhat.com> - 2:2.29.0-3
+- Use vendored dependencies in RHEL builds
+
+* Thu Aug 31 2023 Jakub Čajka <jcajka[at]redhat.com> - 2:2.29.0-2
+- enable rust based tools
+
+* Mon Aug 07 2023 Dan Horák <dan[at]danny.cz> - 2:2.29.0-1
+- rebased to 2.29.0
+
+* Sat Jul 22 2023 Fedora Release Engineering <releng@fedoraproject.org> - 2:2.28.0-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
+
+* Tue Jul 11 2023 Dan Horák <dan[at]danny.cz> - 2:2.28.0-1
+- rebased to 2.28.0
+
+* Wed May 31 2023 Dan Horák <dan[at]danny.cz> - 2:2.27.0-1
+- rebased to 2.27.0
+
+* Fri May 19 2023 Petr Pisar <ppisar@redhat.com> - 2:2.26.0-2
+- Rebuild against rpm-4.19 (https://fedoraproject.org/wiki/Changes/RPM-4.19)
+
+* Fri Mar 03 2023 Dan Horák <dan[at]danny.cz> - 2:2.26.0-1
+- rebased to 2.26.0
+
 * Tue Jan 31 2023 Dan Horák <dan[at]danny.cz> - 2:2.25.0-4
 - add post GA fixes
 

sources

@@ -1 +1,2 @@
-SHA512 (s390-tools-2.25.0.tar.gz) = 1c766a4bd19c957596c741a80141712acf150591c0ff1a47caf1aa8a17f7153c1441560f05aef78bb3f05bd35c1fef431569cabd7e7d6b003bd74beedb7213d9
+SHA512 (s390-tools-2.31.0.tar.gz) = d05722dff760605baad92b25a7a9264b3c936ff851b87a02ab39604a74d02ae4e14632d9b3d83eb9cb82a14bfcbb0d40bb4797896051ed3dd36d7690abfb1c64
+SHA512 (s390-tools-2.31.0-rust-vendor.tar.xz) = f9dc2887bb2502ba6f71ef7ea807380c322a46df8c65f0fc7993f3fb4eec4da120369d3e380dbcca9b6250307da0f6236a649504d542f44730e8009ace8ed450