Add 's390-tools' Provides to all packages

The upstream name of this is 's390-tools', and nearly all
other Linux distributions ship it as such. Make life easier
for people by also providing this name.

.gitignore

@@ -3,3 +3,7 @@ cmsfs-1.1.8c.tar.gz
 lib-zfcp-hbaapi-2.0.tar.gz
 src_vipa-2.0.4.tar.gz
 /lib-zfcp-hbaapi-2.1.tar.gz
+/src_vipa-2.1.0.tar.gz
+/s390-tools-*.tar.bz2
+/s390-tools-*.tar.gz
+/s390-tools-*-rust-vendor.tar.xz

0001-s390-tools-1.5.3-zipl-zfcpdump-2.patch

@@ -1,27 +0,0 @@
-From 2b8336a93376953ba0ed84223264be55243ac7f8 Mon Sep 17 00:00:00 2001
-From: Dan Horak <dan@danny.cz>
-Date: Sun, 20 Jul 2008 09:24:05 +0200
-Subject: [PATCH 1/9] s390-tools-1.5.3-zipl-zfcpdump-2
-
----
- common.mak |    4 ++--
- 1 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/common.mak b/common.mak
-index 8b248f1..0a7916e 100644
---- a/common.mak
-+++ b/common.mak
-@@ -63,8 +63,8 @@ GROUP		= $(shell id -gn)
- export INSTROOT BINDIR LIBDIR MANDIR OWNER GROUP
- 
- # Special defines for zfcpdump
--ZFCPDUMP_DIR    = /usr/local/share/zfcpdump
--ZFCPDUMP_IMAGE  = zfcpdump.image
-+ZFCPDUMP_DIR    = /boot
-+ZFCPDUMP_IMAGE  = zfcpdump
- ZFCPDUMP_RD     = zfcpdump.rd
- export ZFCPDUMP_DIR ZFCPDUMP_IMAGE ZFCPDUMP_RD
- 
--- 
-1.6.3.3
-

0002-s390-tools-1.8.1-zipl-automenu.patch

@@ -1,423 +0,0 @@
-From 2513c0f8096c681f962d77420dac731f7bb33e44 Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Thu, 23 Apr 2009 11:45:36 +0200
-Subject: [PATCH 2/9] s390-tools-1.8.1-zipl-automenu
-
----
- zipl/man/zipl.8 |    7 ++
- zipl/src/job.c  |  194 +++++++++++++++++++++++++++++++++++++++++++++++++++++--
- zipl/src/scan.c |    4 +-
- zipl/src/zipl.c |    1 +
- 4 files changed, 197 insertions(+), 9 deletions(-)
-
-diff --git a/zipl/man/zipl.8 b/zipl/man/zipl.8
-index 8a83c01..6ebf240 100644
---- a/zipl/man/zipl.8
-+++ b/zipl/man/zipl.8
-@@ -249,6 +249,13 @@ whether they contain a dump signature or not.
- This option can only be used together with
- .BR \-\-mvdump .
- 
-+.TP
-+.BR "\-x" " or " "\-\-no-automenu"
-+Disables the automatic creation of a multiboot menu. Specifying a menu with the
-+"-m <MENU>" option or a section disables this feature, too. This option was
-+added for compatibility with previous versions of the multiboot version of
-+zipl.
-+
- .SH EXAMPLE
- 1. Scenario: prepare disk for booting a Linux kernel image using the
- following parameters:
-diff --git a/zipl/src/job.c b/zipl/src/job.c
-index c5c85d8..6a526e4 100644
---- a/zipl/src/job.c
-+++ b/zipl/src/job.c
-@@ -43,6 +43,7 @@ static struct option options[] = {
- 	{ "version",		no_argument,		NULL, 'v'},
- 	{ "verbose",		no_argument,		NULL, 'V'},
- 	{ "add-files",		no_argument,		NULL, 'a'},
-+	{ "no-automenu",        no_argument,            NULL, 'x'},
- 	{ "tape",		required_argument,	NULL, 'T'},
- 	{ "dry-run",		no_argument,		NULL, '0'},
- 	{ "force",		no_argument,		NULL, 'f'},
-@@ -50,7 +51,7 @@ static struct option options[] = {
- };
- 
- /* Command line option abbreviations */
--static const char option_string[] = "-c:t:i:r:p:P:d:D:M:s:m:hHnVvaT:f";
-+static const char option_string[] = "-c:t:i:r:p:P:d:D:M:s:m:hHnVvaxT:f";
- 
- struct command_line {
- 	char* data[SCAN_KEYWORD_NUM];
-@@ -62,11 +63,14 @@ struct command_line {
- 	int version;
- 	int verbose;
- 	int add_files;
-+	int automenu;
- 	int dry_run;
- 	int force;
- 	enum scan_section_type type;
- };
- 
-+/* Global variable for default boot target. Ugly but necessary... */
-+static char *default_target;
- 
- static int
- store_option(struct command_line* cmdline, enum scan_keyword_id keyword,
-@@ -92,6 +96,7 @@ get_command_line(int argc, char* argv[], struct command_line* line)
- 	int i;
- 
- 	memset((void *) &cmdline, 0, sizeof(struct command_line));
-+	cmdline.automenu = 1;
- 	cmdline.type = section_invalid;
- 	is_keyword = 0;
- 	/* Process options */
-@@ -101,16 +106,22 @@ get_command_line(int argc, char* argv[], struct command_line* line)
- 		switch (opt) {
- 		case 'd':
- 			is_keyword = 1;
-+			cmdline.automenu = 0;
-+			scan_key_table[1][8] = req;
- 			rc = store_option(&cmdline, scan_keyword_dumpto,
- 					  optarg);
- 			break;
- 		case 'D':
- 			is_keyword = 1;
-+			cmdline.automenu = 0;
-+			scan_key_table[1][8] = req;
- 			rc = store_option(&cmdline, scan_keyword_dumptofs,
- 					  optarg);
- 			break;
- 		case 'M':
- 			is_keyword = 1;
-+			cmdline.automenu = 0;
-+			scan_key_table[1][8] = req;
- 			rc = store_option(&cmdline, scan_keyword_mvdump,
- 					  optarg);
- #ifndef __s390x__
-@@ -121,35 +132,49 @@ get_command_line(int argc, char* argv[], struct command_line* line)
- 			break;
- 		case 'i':
- 			is_keyword = 1;
-+			cmdline.automenu = 0;
-+			scan_key_table[1][8] = req;
- 			rc = store_option(&cmdline, scan_keyword_image,
- 					  optarg);
- 			break;
- 		case 'P':
-+			cmdline.automenu = 0;
-+			scan_key_table[1][8] = req;
- 			rc = store_option(&cmdline, scan_keyword_parameters,
- 					  optarg);
- 			break;
- 		case 'p':
- 			is_keyword = 1;
-+			cmdline.automenu = 0;
-+			scan_key_table[1][8] = req;
- 			rc = store_option(&cmdline, scan_keyword_parmfile,
- 					  optarg);
- 			break;
- 		case 'r':
- 			is_keyword = 1;
-+			cmdline.automenu = 0;
-+			scan_key_table[1][8] = req;
- 			rc = store_option(&cmdline, scan_keyword_ramdisk,
- 					  optarg);
- 			break;
- 		case 's':
- 			is_keyword = 1;
-+			cmdline.automenu = 0;
-+			scan_key_table[1][8] = req;
- 			rc = store_option(&cmdline, scan_keyword_segment,
- 					  optarg);
- 			break;
- 		case 't':
- 			is_keyword = 1;
-+			cmdline.automenu = 0;
-+			scan_key_table[1][8] = req;
- 			rc = store_option(&cmdline, scan_keyword_target,
- 					  optarg);
- 			break;
- 		case 'T':
- 			is_keyword = 1;
-+			cmdline.automenu = 0;
-+			scan_key_table[1][8] = req;
- 			rc = store_option(&cmdline, scan_keyword_tape,
- 					  optarg);
- 			break;
-@@ -190,6 +215,10 @@ get_command_line(int argc, char* argv[], struct command_line* line)
- 		case 'f':
- 			cmdline.force = 1;
- 			break;
-+		case 'x':
-+			cmdline.automenu = 0;
-+			scan_key_table[1][8] = req;
-+			break;
- 		case 1:
- 			/* Non-option is interpreted as section name */
- 			if (cmdline.section != NULL) {
-@@ -214,6 +243,9 @@ get_command_line(int argc, char* argv[], struct command_line* line)
- 	if (cmdline.help || cmdline.version) {
- 		/* Always accept --help and --version */
- 	} else if ((cmdline.menu != NULL) || (cmdline.section != NULL)) {
-+		/* If either menu or section has been selected disable
-+		   automenu generation */
-+		cmdline.automenu = 0;
- 		/* Config file mode */
- 		if ((cmdline.menu != NULL) && (cmdline.section != NULL)) {
- 			error_reason("Option 'menu' cannot be used when "
-@@ -832,7 +864,14 @@ get_job_from_section_data(char* data[], struct job_data* job, char* section)
- 		/* IPL job */
- 		job->id = job_ipl;
- 		/* Fill in name of bootmap directory */
--		job->bootmap_dir = misc_strdup(data[(int) scan_keyword_target]);
-+		if (data[(int) scan_keyword_target] == NULL) {
-+			if (default_target == NULL) {
-+				error_text("Unable to find default section in your config file.");
-+				break;
-+			}
-+			job->bootmap_dir = misc_strdup(default_target);
-+		} else
-+			job->bootmap_dir = misc_strdup(data[(int) scan_keyword_target]);
- 		if (job->bootmap_dir == NULL)
- 			return -1;
- 		/* Fill in name and address of image file */
-@@ -1102,6 +1141,8 @@ get_menu_job(struct scan_token* scan, char* menu, struct job_data* job)
- 		if (temp_job == NULL)
- 			return -1;
- 		memset((void *) temp_job, 0, sizeof(struct job_data));
-+		if (data[(int) scan_keyword_target] == NULL)
-+			data[(int) scan_keyword_target] = misc_strdup(job->bootmap_dir);
- 		rc = get_job_from_section_data(data, temp_job,
- 					job->data.menu.entry[current].name);
- 		if (rc) {
-@@ -1150,6 +1191,7 @@ get_default_section(struct scan_token* scan, char** section, int* is_menu)
- 	i = scan_find_section(scan, DEFAULTBOOT_SECTION,
- 			      scan_id_section_heading, 0);
- 	if (i<0) {
-+		*section = NULL;
- 		error_reason("No '" DEFAULTBOOT_SECTION "' section found and "
- 			     "no section specified on command line");
- 		return -1;
-@@ -1169,6 +1211,7 @@ get_default_section(struct scan_token* scan, char** section, int* is_menu)
- 		}
- 	}
- 	/* Should not happen */
-+	*section = NULL;
- 	error_reason("No default section specified");
- 	return -1;
- }
-@@ -1184,19 +1227,35 @@ get_section_job(struct scan_token* scan, char* section, struct job_data* job,
- {
- 	char* data[SCAN_KEYWORD_NUM];
- 	char* buffer;
-+	char* default_section;
- 	int rc;
- 	int i;
- 
-+	rc = get_default_section(scan, &default_section, &i);
-+	if (rc)
-+		return rc;
- 	if (section == NULL) {
--		rc = get_default_section(scan, &section, &i);
--		if (rc)
--			return rc;
-+		section = default_section;
- 		if (i) {
- 			/* 'defaultmenu' was specified */
- 			rc = get_menu_job(scan, section, job);
- 			return rc;
- 		}
- 	}
-+	else
-+	{
-+		char* name = NULL;
-+
-+		for (i = 0; (int) scan[i].id != 0; i++) {
-+			if (scan[i].id == scan_id_section_heading) {
-+				name = scan[i].content.section.name;
-+			}
-+			if (scan[i].id == scan_id_keyword_assignment &&
-+			    scan[i].content.keyword.keyword == scan_keyword_target &&
-+			    !strcmp(DEFAULTBOOT_SECTION, name))
-+				default_target = misc_strdup(scan[i].content.keyword.value);
-+		}
-+	}
- 	if (strcmp(section, DEFAULTBOOT_SECTION) == 0) {
- 		error_reason("Special section '" DEFAULTBOOT_SECTION "' cannot "
- 			     "be used as target section");
-@@ -1268,10 +1327,118 @@ get_section_job(struct scan_token* scan, char* section, struct job_data* job,
- }
- 
- 
-+/* Create a fake menu to simulate the old s390utils-1.1.7 multiboot
-+ * behaviour. */
-+static struct scan_token *
-+create_fake_menu(struct scan_token *scan)
-+{
-+	int i, j, pos, numsec, size, defaultpos;
-+	char *name;
-+	char *target;
-+	char *timeout;
-+	char *seclist[1024];
-+	char *defaultsection;
-+	char buf[1024];
-+	struct scan_token *tmp;
-+
-+	/* Count # of sections */
-+	numsec = 0;
-+	name = NULL;
-+	target = NULL;
-+	timeout = NULL;
-+	for (i = 0; (int) scan[i].id != 0; i++) {
-+		if (scan[i].id == scan_id_section_heading) {
-+			name = scan[i].content.section.name;
-+			if (strcmp(DEFAULTBOOT_SECTION, name))
-+				seclist[numsec++] = name;
-+		}
-+		if (scan[i].id == scan_id_keyword_assignment &&
-+		    (scan[i].content.keyword.keyword == scan_keyword_dumpto ||
-+		     scan[i].content.keyword.keyword == scan_keyword_dumptofs)) {
-+			numsec--;
-+			continue;
-+		}
-+		if (scan[i].id == scan_id_keyword_assignment &&
-+		    scan[i].content.keyword.keyword == scan_keyword_target &&
-+		    !strcmp(DEFAULTBOOT_SECTION, name))
-+			target = scan[i].content.keyword.value;
-+
-+		if (scan[i].id == scan_id_keyword_assignment &&
-+		    scan[i].content.keyword.keyword == scan_keyword_timeout)
-+			timeout = scan[i].content.keyword.value;
-+	}
-+	get_default_section(scan, &defaultsection, &j);
-+
-+	if (defaultsection == NULL) {
-+		error_text("Unable to find default section in your config file.");
-+		return NULL;
-+	}
-+
-+	if (target == NULL) {
-+		error_text("Keyword target is missing in default section.");
-+		return NULL;
-+	}
-+
-+	default_target = misc_strdup(target);
-+
-+	size = i+6+numsec;
-+	tmp = (struct scan_token *) misc_malloc(size * sizeof(struct scan_token));
-+	if (tmp == NULL) {
-+		error_text("Couldn't allocate memory for menu entries");
-+		return NULL;
-+	}
-+
-+	memset(tmp, 0, size * sizeof(struct scan_token));
-+	memcpy(tmp, scan, i * sizeof(struct scan_token));
-+	free(scan);
-+	scan = tmp;
-+
-+	defaultpos = 0;
-+	for (j = 0; j < numsec; j++) {
-+		if (!strcmp(defaultsection, seclist[j]))
-+			defaultpos = j+1;
-+	}
-+
-+	snprintf(buf, 1024, "%d", defaultpos);
-+
-+	scan[i].id = scan_id_menu_heading;
-+	scan[i].line = i;
-+	scan[i++].content.menu.name = misc_strdup("rh-automatic-menu");
-+	scan[i].id = scan_id_keyword_assignment;
-+	scan[i].line = i;
-+	scan[i].content.keyword.keyword = scan_keyword_target;
-+	scan[i++].content.keyword.value = misc_strdup(target);
-+	scan[i].id = scan_id_keyword_assignment;
-+	scan[i].line = i;
-+	scan[i].content.keyword.keyword = scan_keyword_default;
-+	scan[i++].content.keyword.value = misc_strdup(buf);
-+	scan[i].id = scan_id_keyword_assignment;
-+	scan[i].line = i;
-+	scan[i].content.keyword.keyword = scan_keyword_prompt;
-+	scan[i++].content.keyword.value = misc_strdup("1");
-+	scan[i].id = scan_id_keyword_assignment;
-+	scan[i].line = i;
-+	scan[i].content.keyword.keyword = scan_keyword_timeout;
-+	if (timeout)
-+		scan[i++].content.keyword.value = misc_strdup(timeout);
-+	else
-+		scan[i++].content.keyword.value = misc_strdup("15");
-+
-+	pos = i;
-+	for (i = 0; i<numsec; i++) {
-+		scan[pos].id = scan_id_number_assignment;
-+		scan[pos].line = pos;
-+		scan[pos].content.number.number = i+1;
-+		scan[pos++].content.number.value = misc_strdup(seclist[i]);
-+	}
-+
-+	return scan;
-+}
-+
- static int
- get_job_from_config_file(struct command_line* cmdline, struct job_data* job)
- {
--	struct scan_token* scan;
-+	struct scan_token* scan, *nscan;
- 	char* filename;
- 	char* source;
- 	int rc;
-@@ -1303,9 +1470,22 @@ get_job_from_config_file(struct command_line* cmdline, struct job_data* job)
- 		scan_free(scan);
- 		return rc;
- 	}
-+
-+	if (cmdline->automenu) {
-+		nscan = create_fake_menu(scan);
-+		if (nscan == NULL) {
-+			scan_free(scan);
-+			return -1;
-+		}
-+		scan = nscan;
-+	}
-+
- 	/* Get job from config file data */
--	if (cmdline->menu != NULL)
-+	if (cmdline->menu != NULL || cmdline->automenu) {
-+		if (cmdline->automenu)
-+			cmdline->menu = misc_strdup("rh-automatic-menu");
- 		rc = get_menu_job(scan, cmdline->menu, job);
-+	}
- 	else {
- 		rc = get_section_job(scan, cmdline->section, job,
- 				cmdline->data[(int) scan_keyword_parameters]);
-diff --git a/zipl/src/scan.c b/zipl/src/scan.c
-index 9948092..caca3cf 100644
---- a/zipl/src/scan.c
-+++ b/zipl/src/scan.c
-@@ -33,9 +33,9 @@ enum scan_key_state scan_key_table[SCAN_SECTION_NUM][SCAN_KEYWORD_NUM] = {
-  *			     rs                                 enu
-  */
- /* defaultboot	*/
--	{opt, inv, inv, inv, inv, inv, inv, inv, inv, inv, inv, opt, inv, inv},
-+	{opt, inv, inv, inv, inv, inv, inv, inv, req, inv, opt, opt, inv, inv},
- /* ipl		*/
--	{inv, inv, inv, req, opt, opt, opt, inv, req, inv, inv, inv, inv, inv},
-+	{inv, inv, inv, req, opt, opt, opt, inv, opt, inv, inv, inv, inv, inv},
- /* segment load */
- 	{inv, inv, inv, inv, inv, inv, inv, req, req, inv, inv, inv, inv, inv},
- /* part dump	*/
-diff --git a/zipl/src/zipl.c b/zipl/src/zipl.c
-index 9cb764c..4d9fd36 100644
---- a/zipl/src/zipl.c
-+++ b/zipl/src/zipl.c
-@@ -73,6 +73,7 @@ static const char* usage_text[] = {
- "-n, --noninteractive            Answer all confirmation questions with 'yes'",
- "-V, --verbose                   Provide more verbose output",
- "-a, --add-files                 Add all referenced files to bootmap file",
-+"-x, --no-automenu               Don't autogenerate multiboot menu",
- "    --dry-run                   Simulate run but don't modify IPL records"
- };
- 
--- 
-1.6.3.3
-

0003-s390-tools-1.8.1-fdasd-su.patch

@@ -1,33 +0,0 @@
-From f8acd63e169cdec39c47ac0d8c1b98e115cf24a1 Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Thu, 23 Apr 2009 11:46:01 +0200
-Subject: [PATCH 3/9] s390-tools-1.8.1-fdasd-su
-
----
- fdasd/fdasd.c |   10 ++++++----
- 1 files changed, 6 insertions(+), 4 deletions(-)
-
-diff --git a/fdasd/fdasd.c b/fdasd/fdasd.c
-index aa16659..3a54968 100644
---- a/fdasd/fdasd.c
-+++ b/fdasd/fdasd.c
-@@ -2009,10 +2009,12 @@ fdasd_get_geometry (fdasd_anchor_t *anc)
- 	if (anc->verbose) printf("disk type check     : ok\n");
- 
-         if (dasd_info.FBA_layout != 0) {
--                snprintf(err_str, ERROR_STRING_SIZE, 
--			"%s is not formatted with z/OS compatible "
--			"disk layout!", options.device);
--                fdasd_error(anc, wrong_disk_format, err_str);
-+                if(!anc->silent) {
-+                    snprintf(err_str, ERROR_STRING_SIZE,
-+			    "%s is not formatted with z/OS compatible "
-+			    "disk layout!", options.device);
-+                    fdasd_error(anc, wrong_disk_format, err_str);
-+                }
-         }      
- 
- 	if (anc->verbose) printf("disk layout check   : ok\n");
--- 
-1.6.3.3
-

0004-s390-tools-1.8.1-fdasd-raid-lvm.patch

@@ -1,153 +0,0 @@
-From 35298f5f9512835071b8c08e843731bbfbb15b7e Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Thu, 23 Apr 2009 11:46:16 +0200
-Subject: [PATCH 4/9] s390-tools-1.8.1-fdasd-raid-lvm
-
----
- fdasd/fdasd.c |   65 ++++++++++++++++++++++++++++++++++++++++++++++----------
- 1 files changed, 53 insertions(+), 12 deletions(-)
-
-diff --git a/fdasd/fdasd.c b/fdasd/fdasd.c
-index 3a54968..a526d7f 100644
---- a/fdasd/fdasd.c
-+++ b/fdasd/fdasd.c
-@@ -258,10 +258,10 @@ fdasd_error(fdasd_anchor_t *anc, enum fdasd_failure why, char *str)
- static int
- read_line(void) 
- {
--	bzero(line_buffer, LINE_LENGTH);
- 	line_ptr = line_buffer;
-         if (!fgets(line_buffer, LINE_LENGTH, stdin))
- 		return 0;
-+	line_buffer[LINE_LENGTH-1] = 0;
- 	while (*line_ptr && !isgraph(*line_ptr))
- 		line_ptr++;
- 	return *line_ptr;
-@@ -312,6 +312,10 @@ fdasd_partition_type (char *str)
- 		strcpy(str, "Linux native");
- 	else if (strncmp("SWAP  ", str, 6) == 0)
- 		strcpy(str, "Linux swap");
-+	else if (strncmp("RAID  ", str, 6) == 0)
-+		strcpy(str, "Linux Raid");
-+	else if (strncmp("LVM   ", str, 6) == 0)
-+		strcpy(str, "Linux LVM");
- 	else
- 		strcpy(str, "unknown");
- 
-@@ -1122,14 +1126,24 @@ fdasd_write_vtoc_labels (fdasd_anchor_t *anc)
- 			strncpy(c1, s2, 31);
- 		}
- 		else {
-+			char str[20];
- 			char *tmp = strstr(ch, "SWAP");
-+			char *tmp1 = strstr(ch, "RAID");
- 
- 			/* create a new data set name */
- 			while (getpos(anc, k) > -1)
- 				k++;
- 
- 			setpos(anc, k, i-1);
--			
-+
-+			strncpy(s2, ch, 44);
-+			s2[44]=0;
-+			vtoc_ebcdic_dec(s2, s2, 44);
-+			c2 = strstr(s2, "PART");
-+			if (c2 != NULL) strncpy(str, c2+=9, 6);
-+			str[6] = '\0';
-+			fdasd_partition_type(str);
-+
- 			strncpy(ch, "LINUX.V               "
- 				"                      ", 44);
- 
-@@ -1145,10 +1159,21 @@ fdasd_write_vtoc_labels (fdasd_anchor_t *anc)
- 			strncpy(c1, dsno, 4);
- 
- 			c1 += 4;
--			if (tmp)
--				strncpy(c1, ".SWAP", 5);
--			else
--				strncpy(c1, ".NATIVE", 7);
-+			if (tmp || tmp1) {
-+				if (tmp)
-+					strncpy(c1, ".SWAP", 5);
-+				if (tmp1)
-+					strncpy(c1, ".RAID", 5);
-+			} else {
-+				if (strcmp("unknown", str) == 0) {
-+					strncpy(c1, ".NATIVE", 7);
-+				}
-+				else {
-+					strncpy(c1, ".", 1);
-+					strncpy(c1+1, c2, 6);
-+				}
-+			}
-+
- 		}
- 		vtoc_ebcdic_enc(ch, ch, 44);
- 		if (anc->verbose) printf("%2x ", part_info->f1->DS1FMTID);
-@@ -1433,9 +1458,10 @@ fdasd_change_part_type (fdasd_anchor_t *anc)
- 
- 	printf("current partition type is: %s\n\n", fdasd_partition_type(str));
- 	printf("   1  Linux native\n" \
--	       "   2  Linux swap\n\n");
-+	       "   2  Linux swap\n" \
-+	       "   3  Linux raid\n\n");
- 	part_type = 0;
--	while ((part_type < 1) || (part_type > 2)) {
-+	while ((part_type < 1) || (part_type > 3)) {
-         	while (!isdigit(part_type = 
- 				read_char("new partition type: ")));
-         	part_type -= 48;
-@@ -1448,6 +1474,9 @@ fdasd_change_part_type (fdasd_anchor_t *anc)
-         case 2:
- 		strncpy(str, "SWAP  ", 6);
-                 break;
-+        case 3:
-+		strncpy(str, "RAID  ", 6);
-+                break;
-         default:
-                 printf("'%d' is not supported!\n", part_type);
-         }
-@@ -1625,7 +1654,7 @@ fdasd_process_invalid_vtoc(fdasd_anchor_t *anc)
- static void
- fdasd_process_valid_vtoc(fdasd_anchor_t *anc, unsigned long blk)
- {
--	int f1_counter = 0, f7_counter = 0, f5_counter = 0;
-+	int f1_counter = 0, f7_counter = 0, f5_counter = 0, oldfmt = 0;
- 	int i, part_no, f1_size = sizeof(format1_label_t);
- 	partition_info_t *part_info = anc->first;
- 	format1_label_t f1_label;
-@@ -1677,14 +1706,26 @@ fdasd_process_valid_vtoc(fdasd_anchor_t *anc, unsigned long blk)
- 			vtoc_ebcdic_enc(part_info->f1->DS1DSNAM,
- 					part_info->f1->DS1DSNAM, 44);
- 
--			if ((part_no < 0) || (part_no >= USABLE_PARTITIONS))
-+			/* this dasd has data set names 0000-0002
-+                           but we use now 0001-0003 */
-+                        if (part_no == -1)
-+                                oldfmt++;
-+
-+			if (((oldfmt == 0) && (part_no < 0))
-+			    || (part_no >= USABLE_PARTITIONS))
- 				printf("WARNING: partition number (%i) found "
- 				       "in data set name of an existing "
- 				       "partition\ndoes not match range of "
- 				       "possible partition numbers (1-%d)\n\n",
- 				       part_no + 1, USABLE_PARTITIONS);
--			else
--				setpos(anc, part_no, f1_counter);
-+			else {
-+				if (oldfmt) /* correct +1 */ {
-+					setpos(anc, part_no+1, f1_counter);
-+					printf("Correcting f1 header number!\n");
-+				}
-+				else
-+					setpos(anc, part_no, f1_counter);
-+			}
- 
- 			part_info = part_info->next;
- 			f1_counter++;
--- 
-1.6.3.3
-

0005-don-t-create-automenu-when-default-menu-exists.patch

@@ -1,59 +0,0 @@
-From 1efcfe8d7ad20f7a3f584628375da60682b4579c Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Thu, 23 Apr 2009 15:28:06 +0200
-Subject: [PATCH 5/9] don't create automenu when default menu exists
-
----
- zipl/src/job.c |   25 +++++++++++++++----------
- 1 files changed, 15 insertions(+), 10 deletions(-)
-
-diff --git a/zipl/src/job.c b/zipl/src/job.c
-index 6a526e4..89c8c23 100644
---- a/zipl/src/job.c
-+++ b/zipl/src/job.c
-@@ -1441,6 +1441,8 @@ get_job_from_config_file(struct command_line* cmdline, struct job_data* job)
- 	struct scan_token* scan, *nscan;
- 	char* filename;
- 	char* source;
-+	char* default_section;
-+	int is_menu;
- 	int rc;
- 
- 	/* Read configuration file */
-@@ -1470,20 +1472,23 @@ get_job_from_config_file(struct command_line* cmdline, struct job_data* job)
- 		scan_free(scan);
- 		return rc;
- 	}
--
--	if (cmdline->automenu) {
--		nscan = create_fake_menu(scan);
--		if (nscan == NULL) {
--			scan_free(scan);
--			return -1;
--		}
--		scan = nscan;
--	}
-+	
-+	/* disable automenu iff default menu exists */
-+	rc = get_default_section(scan, &default_section, &is_menu);
-+	if (!rc && is_menu)
-+		cmdline->automenu = 0;
- 
- 	/* Get job from config file data */
- 	if (cmdline->menu != NULL || cmdline->automenu) {
--		if (cmdline->automenu)
-+		if (cmdline->automenu) {
-+			nscan = create_fake_menu(scan);
-+			if (nscan == NULL) {
-+				scan_free(scan);
-+				return -1;
-+			}
-+			scan = nscan;
- 			cmdline->menu = misc_strdup("rh-automatic-menu");
-+		}
- 		rc = get_menu_job(scan, cmdline->menu, job);
- 	}
- 	else {
--- 
-1.6.3.3
-

0006-s390-tools-1.8.1-zipl-kdump-man.patch

@@ -1,31 +0,0 @@
-From 894de5382653e4389dc8490f2ee4a2a9c59eb86d Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 19 Jun 2009 10:01:30 +0200
-Subject: [PATCH 6/9] s390-tools-1.8.1-zipl-kdump-man
-
-Description: Add kdump kernel installation instruction to zipl man page.
-Symptom:     User wants to prepare SCSI disk for dump, but has not installed
-             the kdump kernel rpm.
-Problem:     The installation of the kdump kernel rpm is prereq for preparing
-             a SCSI dump disk for dump.
-Solution:    Document that in the zipl man page.
----
- zipl/man/zipl.8 |    2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
-diff --git a/zipl/man/zipl.8 b/zipl/man/zipl.8
-index 6ebf240..6df6026 100644
---- a/zipl/man/zipl.8
-+++ b/zipl/man/zipl.8
-@@ -176,6 +176,8 @@ will be incomplete.
- It is not possible to specify both this parameter and the name of a menu
- or configuration section on the command line at the same time.
- 
-+.B Note that before using this option the "kernel-kdump" rpm has to be
-+.B installed.
- .TP
- .BR "\-M <DUMPLIST[,SIZE]>" " or " "--mvdump=<DUMPLIST[,SIZE]>"
- Install a multi-volume dump record on each device associated with one of the
--- 
-1.6.3.3
-

0007-s390-tools-1.8.1-lszfcp-perf.patch

@@ -1,25 +0,0 @@
-From 80e1e88e108b774c7aa7c201326f1a92cf1b7e35 Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Wed, 26 Aug 2009 14:21:14 +0200
-Subject: [PATCH 7/9] s390-tools-1.8.1-lszfcp-perf
-
----
- zconf/lszfcp |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/zconf/lszfcp b/zconf/lszfcp
-index d0bf84f..a872d05 100755
---- a/zconf/lszfcp
-+++ b/zconf/lszfcp
-@@ -233,7 +233,7 @@ show_devices()
- 	# Differentiate old and new sysfs layout
- 	if $FC_CLASS; then
- 		SCSI_DEVICE_LIST=`ls -d \
--			$SYSFS/devices/css0/*/*/host*/rport*/target*/*/ \
-+			$SYSFS/bus/ccw/drivers/zfcp/*/host*/rport*/target*/*/ \
- 		       	2>/dev/null |grep -P '\d+:\d+:\d+:\d+'`
- 	else
- 		SCSI_DEVICE_LIST=`ls -d $SYSFS/devices/css0/*/*/host*/*/`
--- 
-1.6.3.3
-

0008-fix-string-overflow-in-vtoc_volume_label_init.patch

@@ -1,28 +0,0 @@
-From d0c06736586d8f85f2e7c64291f3f289c12a0caa Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Thu, 24 Sep 2009 09:12:39 +0200
-Subject: [PATCH 8/9] fix string overflow in vtoc_volume_label_init
-
-Originaly it tries to copy a 84B string into 4B field and reset also
-the other fields thru the overflow. This doesn't work with recent GCC
-and the security-related compile flags that are used in Fedora.
----
- libvtoc/vtoc.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/libvtoc/vtoc.c b/libvtoc/vtoc.c
-index 62a02a0..cebd5a4 100644
---- a/libvtoc/vtoc.c
-+++ b/libvtoc/vtoc.c
-@@ -326,7 +326,7 @@ void vtoc_volume_label_init (volume_label_t *vlabel)
- {
- 	sprintf(buffer, "%84s", " ");
- 	vtoc_ebcdic_enc(buffer, buffer, 84);	
--	strncpy(vlabel->volkey, buffer, 84);
-+	memcpy(vlabel, buffer, 84);
- }
- 
- 
--- 
-1.6.3.3
-

0009-change-default-load-address-for-ramdisk.patch

@@ -1,27 +0,0 @@
-From 1697d4f40be133c78cd09fb0af14af22e8c6219e Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Sun, 4 Oct 2009 17:46:16 +0200
-Subject: [PATCH 9/9] change default load address for ramdisk
-
-The default load address for the initial ramdisk is changed from
-0x800000 to 0x2000000 to allow larger kernels to be loaded.
----
- zipl/include/zipl.h |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/zipl/include/zipl.h b/zipl/include/zipl.h
-index 1f70e48..d2d26dd 100644
---- a/zipl/include/zipl.h
-+++ b/zipl/include/zipl.h
-@@ -22,7 +22,7 @@
- #define DEFAULT_PARMFILE_ADDRESS	0x1000LL
- #define DEFAULT_STAGE3_ADDRESS		0xa000LL
- #define DEFAULT_IMAGE_ADDRESS		0x10000LL
--#define DEFAULT_RAMDISK_ADDRESS 	0x800000LL
-+#define DEFAULT_RAMDISK_ADDRESS 	0x2000000LL
- 
- #define PSW_ADDRESS_MASK		0x000000007fffffffLL
- #define PSW_LOAD			0x0008000080000000LL
--- 
-1.6.3.3
-

0010-improve-mon_statd-init-script.patch

@@ -1,189 +0,0 @@
-From 7cd1f2254e27cae8e061d1b42fa6c78bc10a5f39 Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Thu, 8 Oct 2009 10:29:23 +0200
-Subject: [PATCH] improve mon_statd init script
-
-- stop: do not print error messages if a daemon is not configured
-- start: do not load module if no daemon is configured
-- remove useless newlines
----
- etc/init.d/mon_statd |  113 ++++++++++++++++++++++++++++----------------------
- 1 files changed, 64 insertions(+), 49 deletions(-)
-
-diff --git a/etc/init.d/mon_statd b/etc/init.d/mon_statd
-index 4d84b5b..60bcf00 100755
---- a/etc/init.d/mon_statd
-+++ b/etc/init.d/mon_statd
-@@ -22,7 +22,6 @@ PROCD_PATH=/usr/sbin/$PROCD
- CONFIG_FILE=/etc/sysconfig/$DAEMON
- FSSTATD_PID_FILE=/var/run/$FSSTATD.pid
- PROCD_PID_FILE=/var/run/$PROCD.pid
--RETVAL=0
- 
- # source function library
- . /lib/lsb/init-functions
-@@ -32,68 +31,81 @@ if [ -f $CONFIG_FILE ]; then
- 	. $CONFIG_FILE
- fi
- 
--start()
-+load_kernel_module()
- {
- 	if [ ! -e /dev/monwriter ]; then
- 		echo "Loading monwriter module..."
- 		modprobe monwriter 2>&1
--		if [ "$?" -ne 0 ]; then
-+		if [ $? -ne 0 ]; then
-+			exit 1
-+		fi
-+		udevsettle
-+		if [ $? -ne 0 ]; then
- 			exit 1
- 		fi
--		while [ ! -e /dev/monwriter ]; do
--			sleep 0
--		done
- 	fi
-+}
- 
--	if [ ! -f $FSSTATD_PID_FILE -a "$FSSTAT" = "yes" ]; then
--		echo -n $"Starting $FSSTATD:"
--		$FSSTATD_PATH -i $FSSTAT_INTERVAL
--		if [ $? == 0 ]; then
-+start_daemon()
-+{
-+	local daemon_name=$1
-+	local daemon_interval=$2
-+	local daemon_pid_file=$3
-+	local daemon_path=$4
-+
-+	if [ ! -f $daemon_pid_file ]; then
-+		load_kernel_module
-+		echo -n "Starting $daemon_name:"
-+		$daemon_path -i $daemon_interval
-+		if [ $? -eq 0 ]; then
- 			touch /var/lock/subsys/mon_statd
- 			log_success_msg
- 		else
- 			log_failure_msg
- 		fi
--	elif [ "$FSSTAT" = "yes" ]; then
--		echo "$FSSTATD (pid $(cat $FSSTATD_PID_FILE)) is already running..."
-+	else
-+		echo "$daemon_name (pid $(cat $daemon_pid_file)) is already running..."
-+	fi
-+}
-+	
-+start()
-+{
-+	if [ "$FSSTAT" = "yes" ]; then
-+		start_daemon $FSSTATD $FSSTAT_INTERVAL $FSSTATD_PID_FILE \
-+			$FSSTATD_PATH
- 	fi
- 
--	if [ ! -f $PROCD_PID_FILE -a "$PROC" = "yes" ]; then
--		echo -n $"Starting $PROCD:"
--		$PROCD_PATH -i $PROC_INTERVAL
--		if [ $? == 0 ]; then
--			touch /var/lock/subsys/mon_statd
--			log_success_msg
--		else
--			log_failure_msg
--		fi
--	elif [ "$PROC" = "yes" ]; then
--		echo "$PROCD (pid $(cat $PROCD_PID_FILE)) is already running..."
-+	if [ "$PROC" = "yes" ]; then
-+		start_daemon $PROCD $PROC_INTERVAL $PROCD_PID_FILE \
-+			$PROCD_PATH
- 	fi
--	echo
- }
- 
--stop()
-+stop_daemon()
- {
--	echo -n $"Stopping $FSSTATD:"
--	if [ -f $FSSTATD_PID_FILE ]; then
--		killproc $FSSTATD_PATH -TERM
-+	local daemon_name=$1
-+	local daemon_pid_file=$2
-+	local daemon_path=$3
-+
-+	echo -n "Stopping $daemon_name:"
-+	if [ -f $daemon_pid_file ]; then
-+		killproc $daemon_path -TERM
- 		log_success_msg
--		rm -f $FSSTATD_PID_FILE
-+		rm -f $daemon_pid_file
- 	else
- 		log_failure_msg
- 	fi
-+}
- 
--	echo -n $"Stopping $PROCD:"
--	if [ -f $PROCD_PID_FILE ]; then
--		killproc $PROCD_PATH -TERM
--		log_success_msg
--		rm -f $PROCD_PID_FILE
--	else
--		log_failure_msg
-+stop()
-+{
-+	if [ "$FSSTAT" = "yes" ]; then
-+		stop_daemon $FSSTATD $FSSTATD_PID_FILE $FSSTATD_PATH
-+	fi
-+	if [ "$PROC" = "yes" ]; then
-+		stop_daemon $PROCD $PROCD_PID_FILE $PROCD_PATH
- 	fi
- 	rm -f /var/lock/subsys/mon_statd
--	echo
- }
- 
- restart() {
-@@ -101,20 +113,23 @@ restart() {
- 	start
- }
- 
--status()
-+status_daemon()
- {
--	if [ ! -f $FSSTATD_PID_FILE ]; then
--		echo "$FSSTATD is not running."
--	else
--		echo "$FSSTATD (pid $(cat $FSSTATD_PID_FILE), interval: $FSSTAT_INTERVAL) is running."
--	fi
-+	local daemon_name=$1
-+	local daemon_pid_file=$2
-+	local daemon_interval=$3
- 
--	if [ ! -f $PROCD_PID_FILE ]; then
--		echo "$PROCD is not running."
-+	if [ ! -f $daemon_pid_file ]; then
-+		echo "$daemon_name is not running."
- 	else
--		echo "$PROCD (pid $(cat $PROCD_PID_FILE), interval: $PROC_INTERVAL) is running."
-+		echo "$daemon_name (pid $(cat $daemon_pid_file), interval: $daemon_interval) is running."
- 	fi
--	echo
-+}
-+
-+status()
-+{
-+	status_daemon $FSSTATD $FSSTATD_PID_FILE $FSSTAT_INTERVAL
-+	status_daemon $PROCD $PROCD_PID_FILE $PROC_INTERVAL
- }
- 
- # How are we called?
-@@ -133,7 +148,7 @@ case "$1" in
- 		;;
- 	*)
- 		echo "Usage: $DAEMON {start|stop|status|restart|reload}"
--		RETVAL=1
-+		exit 1
- esac
- 
--exit $RETVAL
-+exit 0
--- 
-1.6.3.3
-

0011-update-readahead-value-for-better-performance.patch

@@ -1,38 +0,0 @@
-From 5707bfdf0aac985e8e82c9a5004eb458d1d79801 Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 30 Oct 2009 11:23:08 +0100
-Subject: [PATCH] update readahead value for better performance
-
-Description: dasd,zfcp: Add udev rule to set increased "default max readahead"
-Symptom:     Sequential read performance on disks is not as good as it could be.
-Problem:     The current "default max readahead" defined by the kernel is too
-             small for s390 (128 kb).
-Solution:    Add udev rule to set a better default value (512 kb). This will
-             increase sequential read performance up to 40%.
----
- etc/udev/rules.d/60-readahead.rules |   13 +++++++++++++
- 1 files changed, 13 insertions(+), 0 deletions(-)
- create mode 100644 etc/udev/rules.d/60-readahead.rules
-
-diff --git a/etc/udev/rules.d/60-readahead.rules b/etc/udev/rules.d/60-readahead.rules
-new file mode 100644
-index 0000000..3133c66
---- /dev/null
-+++ b/etc/udev/rules.d/60-readahead.rules
-@@ -0,0 +1,13 @@
-+#
-+# Rules to set an increased default max readahead size for s390 disk devices
-+# This file should be installed in /etc/udev/rules.d
-+#
-+
-+SUBSYSTEM!="block", GOTO="ra_end"
-+
-+ACTION!="add", GOTO="ra_end"
-+# on device add set initial readahead to 512 (instead of in kernel 128)
-+KERNEL=="sd*[!0-9]", ATTR{queue/read_ahead_kb}="512"
-+KERNEL=="dasd*[!0-9]", ATTR{queue/read_ahead_kb}="512"
-+
-+LABEL="ra_end"
--- 
-1.6.3.3
-

0012-fix-multipath-device-detection-in-ziomon.patch

@@ -1,33 +0,0 @@
-From e9c5f5e15122b143f5f202e9782773321f8cf6b9 Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 13 Nov 2009 10:46:57 +0100
-Subject: [PATCH 12/14] fix multipath device detection in ziomon
-
-Description: ziomon: Fix multipath device detection
-Symptom:     Running ziomon with a valid multipath device like
-             /dev/mapper/36005076303ffc56200000000000010cc
-             fails with "ziomon: The following devices do not seem
-             to exist:".
-Problem:     The output from multipath -l is not appended correctly to
-             the mp_arr array.
-Solution:    Properly initializing mp_arr to an empty array fixes this.
----
- ziomon/ziomon |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/ziomon/ziomon b/ziomon/ziomon
-index 7449843..924c1dd 100755
---- a/ziomon/ziomon
-+++ b/ziomon/ziomon
-@@ -471,7 +471,7 @@ function clean_devices() {
- function check_for_multipath_devices() {
-    local i;
-    local j;
--   local mp_arr;
-+   local mp_arr=();
-    local line;
-    local devices_basenames;
-    local tmp;
--- 
-1.6.3.3
-

0013-zipl-handle-status-during-ipl.patch

@@ -1,119 +0,0 @@
-From 4770ba2827a5c582c6376139f1ec2d10519779e2 Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 13 Nov 2009 10:48:17 +0100
-Subject: [PATCH 13/14] zipl - handle status during ipl
-
-Description: zipl: handle status during ipl
-Symptom:     You encounter an error during IPL with "disabled wait" message.
-Problem:     During the IPL sequence the subchannel of the IPL device has
-             to be enabled. If there is a status pending or busy condition
-             on the subchannel the IPL code abborts the IPL and goes into
-             disabled wait.
-Solution:    To resolve the problem the IPL code accepts the status pending
-             or busy condition on the subchannel and does up to 256 retries.
----
- zipl/boot/common.S |   65 ++++++++++++++++++++++++++++++++++-----------------
- 1 files changed, 43 insertions(+), 22 deletions(-)
-
-diff --git a/zipl/boot/common.S b/zipl/boot/common.S
-index 620fed9..fa45e5a 100644
---- a/zipl/boot/common.S
-+++ b/zipl/boot/common.S
-@@ -6,6 +6,7 @@
- #
- 
- # some definitions from kernel land
-+__LC_IRB = 0x0300
- __LC_IPLDEV  = 0xC6C
- __LC_PANIC_MAGIC= 0xE00
- 
-@@ -186,23 +187,33 @@ _load_blocklist:
- _enable_device:
-         stm    %r6,%r15,24(%r15)
-         basr   %r13,0                   # base register
--0:      s      %r15,1f-0b(%r13)
-+0:      s      %r15,4f-0b(%r13)
- 	lr     %r1,%r2
--	l      %r2,4f-0b(%r13)          # set panik code early
--        stsch  2f-0b(%r13)
--        oi     2f-0b+5(%r13),0x84       # enable ssch and multipath mode
--        msch   2f-0b(%r13)
--	bnz    _panik-0b(%r13)          # subchannel busy or in error ?
--	lctl   %c6,%c6,3f-0b(%r13)      # enable all interrupt classes
-+	l      %r2,7f-0b(%r13)          # set panik code early
-+        stsch  5f-0b(%r13)
-+	brc    1,3f		        # panic if not operational
-+        oi     5f-0b+5(%r13),0x80       # enable subchannel
-+	lhi    %r6,256			# r6 retry counter
-+1: # modify subchannel
-+        msch   5f-0b(%r13)
-+	brc    6,2f        		# status pending or busy
-+	brc    1,3f		        # panic if not operational
-+	lctl   %c6,%c6,6f-0b(%r13)      # enable all interrupt classes
- 	sr     %r2,%r2
--	ic     %r2,10+2f-0b(%r13)	# return lpum in r2
-+	ic     %r2,10+5f-0b(%r13)	# return lpum in r2
-         lm     %r6,%r15,120(%r15)
-         br     %r14
--1:	.long  96
-+2: # clear status and retry
-+	tsch   __LC_IRB
-+	brc    1,3f		        # panic if not operational
-+	brct   %r6,1b			# retry
-+3: # panic
-+	b      _panik-0b(%r13)          # panic
-+4:	.long  96
- 	.align 8
--2:	.fill  64,1,0
--3:	.long  0xff000000               # CR6 initial value
--4:      .long  EENABLE_DEV
-+5:	.fill  64,1,0
-+6:	.long  0xff000000               # CR6 initial value
-+7:      .long  EENABLE_DEV
- 
- #
- # Disable I/O on the ipl device.
-@@ -211,20 +222,30 @@ _enable_device:
- _disable_device:
-         stm    %r6,%r15,24(%r15)
-         basr   %r13,0                   # base register
--0:      s      %r15,1f-0b(%r13)
-+0:      s      %r15,4f-0b(%r13)
- 	lr     %r1,%r2
--	l      %r2,3f-0b(%r13)          # set panik code early
--	lctl   %c6,%c6,2f-0b(%r13)      # disable all interrupt classes
--        stsch  2f-0b(%r13)
--        ni     2f-0b+5(%r13),0x7B       # disable ssch and multipath mode
--        msch   2f-0b(%r13)
--	bnz    _panik-0b(%r13)          # subchannel busy or in error ?
-+	l      %r2,6f-0b(%r13)          # set panik code early
-+	lctl   %c6,%c6,5f-0b(%r13)      # disable all interrupt classes
-+        stsch  5f-0b(%r13)
-+	brc    1,3f			# panic if not operational
-+        ni     5f-0b+5(%r13),0x7F       # disable subchannel
-+	lhi    %r6,256			# r6 retry counter
-+1: # modify subchannel
-+        msch   5f-0b(%r13)
-+	brc    6,2f			# status pending or busy
-+	brc    1,3f			# panic if not operational
-         lm     %r6,%r15,120(%r15)
-         br     %r14
--1:	.long  96
-+2: # clear status and retry
-+	tsch   __LC_IRB
-+	brc    1,3f			# panic if not operational
-+	brct   %r6,1b
-+3: # panic
-+	b      _panik-0b(%r13)          # panic
-+4:	.long  96
-         .align 8
--2:	.long  0x00000000               # CR6 (all interrupts classes disabled)
--3:      .long  EDISABLE_DEV
-+5:	.long  0x00000000               # CR6 (all interrupts classes disabled)
-+6:      .long  EDISABLE_DEV
- 	.endm	
- 
- 	.macro io_subroutines
--- 
-1.6.3.3
-

0014-dasdview-fdasd-fix-floating-point-error-for-unformat.patch

@@ -1,285 +0,0 @@
-From 72168f2269dac94d25112e0ad548bd3fcdf907d9 Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 13 Nov 2009 10:49:37 +0100
-Subject: [PATCH 14/14] dasdview, fdasd: fix floating point error for unformatted devices
-
-When executed on an unformatted device the tools dasdview and fdasd
-will end with an floating point exception error.
-The reason for the error lies in the fact that we cannot rely on the
-HDIO_GETGEO ioctl to report a correct number of cylinders and so we
-compute the number of cylinders from the device size. However,
-for unformatted devices the device size is zero and thus our
-computation ends with a floating point exception.
-To solve this issue read the correct number of cylinders from
-the DASD device characteristics, which can be found in the data
-returned by the BIODASDINFO ioctl.
----
- dasdview/dasdview.c |   22 +++++++-------
- dasdview/dasdview.h |   74 +++++++++++++++++++++++++++++++++++++++++++++++++++
- fdasd/fdasd.c       |   18 ++++++------
- fdasd/fdasd.h       |   74 +++++++++++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 168 insertions(+), 20 deletions(-)
-
-diff --git a/dasdview/dasdview.c b/dasdview/dasdview.c
-index a74ae33..2909b16 100644
---- a/dasdview/dasdview.c
-+++ b/dasdview/dasdview.c
-@@ -169,7 +169,7 @@ static void
- dasdview_get_info(dasdview_info_t *info)
- {
- 	int fd;
--	u_int64_t device_size;
-+	struct dasd_eckd_characteristics *characteristics;
- 
- 	fd = open(info->device, O_RDONLY);
- 	if (fd == -1)
-@@ -201,16 +201,6 @@ dasdview_get_info(dasdview_info_t *info)
- 		exit(-1);
- 	}
- 
--	if (ioctl(fd, BLKGETSIZE64, &device_size) != 0) {
--		close(fd);
--		zt_error_print("dasdview: ioctl error\n" \
--			"Could not retrieve device size information.\n");
--		exit(-1);
--	}
--
--	info->hw_cylinders = ((device_size / info->blksize)
--			      / info->geo.sectors) / info->geo.heads;
--
- 	/* get disk information */
- 	if (ioctl(fd, BIODASDINFO2, &info->dasd_info) == 0) {
- 		info->dasd_info_version = 2;
-@@ -223,6 +213,16 @@ dasdview_get_info(dasdview_info_t *info)
- 			exit(-1);
- 		}
- 	}
-+
-+	characteristics = (struct dasd_eckd_characteristics *)
-+		&info->dasd_info.characteristics;
-+	if (characteristics->no_cyl == LV_COMPAT_CYL &&
-+	    characteristics->long_no_cyl)
-+		info->hw_cylinders = characteristics->long_no_cyl;
-+	else
-+		info->hw_cylinders = characteristics->no_cyl;
-+
-+
- 	close(fd);
- }
- 
-diff --git a/dasdview/dasdview.h b/dasdview/dasdview.h
-index 39e1228..5388592 100644
---- a/dasdview/dasdview.h
-+++ b/dasdview/dasdview.h
-@@ -72,6 +72,80 @@ typedef struct dasd_information2_t {
-         unsigned int reserved7;       /* reserved for further use ,...          */
- } dasd_information2_t;
- 
-+struct dasd_eckd_characteristics {
-+	unsigned short cu_type;
-+	struct {
-+		unsigned char support:2;
-+		unsigned char async:1;
-+		unsigned char reserved:1;
-+		unsigned char cache_info:1;
-+		unsigned char model:3;
-+	} __attribute__ ((packed)) cu_model;
-+	unsigned short dev_type;
-+	unsigned char dev_model;
-+	struct {
-+		unsigned char mult_burst:1;
-+		unsigned char RT_in_LR:1;
-+		unsigned char reserved1:1;
-+		unsigned char RD_IN_LR:1;
-+		unsigned char reserved2:4;
-+		unsigned char reserved3:8;
-+		unsigned char defect_wr:1;
-+		unsigned char XRC_supported:1;
-+		unsigned char reserved4:1;
-+		unsigned char striping:1;
-+		unsigned char reserved5:4;
-+		unsigned char cfw:1;
-+		unsigned char reserved6:2;
-+		unsigned char cache:1;
-+		unsigned char dual_copy:1;
-+		unsigned char dfw:1;
-+		unsigned char reset_alleg:1;
-+		unsigned char sense_down:1;
-+	} __attribute__ ((packed)) facilities;
-+	unsigned char dev_class;
-+	unsigned char unit_type;
-+	unsigned short no_cyl;
-+	unsigned short trk_per_cyl;
-+	unsigned char sec_per_trk;
-+	unsigned char byte_per_track[3];
-+	unsigned short home_bytes;
-+	unsigned char formula;
-+	union {
-+		struct {
-+			unsigned char f1;
-+			unsigned short f2;
-+			unsigned short f3;
-+		} __attribute__ ((packed)) f_0x01;
-+		struct {
-+			unsigned char f1;
-+			unsigned char f2;
-+			unsigned char f3;
-+			unsigned char f4;
-+			unsigned char f5;
-+		} __attribute__ ((packed)) f_0x02;
-+	} __attribute__ ((packed)) factors;
-+	unsigned short first_alt_trk;
-+	unsigned short no_alt_trk;
-+	unsigned short first_dia_trk;
-+	unsigned short no_dia_trk;
-+	unsigned short first_sup_trk;
-+	unsigned short no_sup_trk;
-+	unsigned char MDR_ID;
-+	unsigned char OBR_ID;
-+	unsigned char director;
-+	unsigned char rd_trk_set;
-+	unsigned short max_rec_zero;
-+	unsigned char reserved1;
-+	unsigned char RWANY_in_LR;
-+	unsigned char factor6;
-+	unsigned char factor7;
-+	unsigned char factor8;
-+	unsigned char reserved2[3];
-+	unsigned char reserved3[6];
-+	unsigned int long_no_cyl;
-+} __attribute__ ((packed));
-+
- /*
-  * values to be used for dasd_information2_t.format
-  * 0x00: NOT formatted
-diff --git a/fdasd/fdasd.c b/fdasd/fdasd.c
-index a526d7f..8f7f5aa 100644
---- a/fdasd/fdasd.c
-+++ b/fdasd/fdasd.c
-@@ -2002,7 +2002,7 @@ fdasd_get_geometry (fdasd_anchor_t *anc)
-         int fd, blksize = 0;
- 	dasd_information_t dasd_info;
- 	char err_str[ERROR_STRING_SIZE];
--	u_int64_t device_size;
-+	struct dasd_eckd_characteristics *characteristics;
- 
- 	if ((fd = open(options.device,O_RDONLY)) < 0) {
- 		snprintf(err_str, ERROR_STRING_SIZE,
-@@ -2023,14 +2023,6 @@ fdasd_get_geometry (fdasd_anchor_t *anc)
- 			    "Could not retrieve blocksize information.");
- 	}
- 
--	if (ioctl(fd, BLKGETSIZE64, &device_size) != 0) {
--		close(fd);
--		fdasd_error(anc, unable_to_ioctl,
--			    "Could not retrieve device size information.");
--	}
--
--	anc->hw_cylinders = ((device_size / blksize) / geo.sectors) / geo.heads;
--
- 	/* get disk type */
- 	if (ioctl(fd, BIODASDINFO, &dasd_info) != 0) {
- 	        close(fd);
-@@ -2038,6 +2030,14 @@ fdasd_get_geometry (fdasd_anchor_t *anc)
- 			    "Could not retrieve disk information.");
- 	}
- 
-+	characteristics =
-+		(struct dasd_eckd_characteristics *) &dasd_info.characteristics;
-+	if (characteristics->no_cyl == LV_COMPAT_CYL &&
-+	    characteristics->long_no_cyl)
-+		anc->hw_cylinders = characteristics->long_no_cyl;
-+	else
-+		anc->hw_cylinders = characteristics->no_cyl;
-+
- 	close(fd);
- 
- 	if (strncmp(dasd_info.type, "ECKD", 4) != 0) {
-diff --git a/fdasd/fdasd.h b/fdasd/fdasd.h
-index 107e486..8a1bfd0 100644
---- a/fdasd/fdasd.h
-+++ b/fdasd/fdasd.h
-@@ -43,6 +43,80 @@ typedef struct dasd_information_t {
-         char configuration_data[256]; /* from read_configuration_data        */
- } dasd_information_t;
- 
-+struct dasd_eckd_characteristics {
-+	unsigned short cu_type;
-+	struct {
-+		unsigned char support:2;
-+		unsigned char async:1;
-+		unsigned char reserved:1;
-+		unsigned char cache_info:1;
-+		unsigned char model:3;
-+	} __attribute__ ((packed)) cu_model;
-+	unsigned short dev_type;
-+	unsigned char dev_model;
-+	struct {
-+		unsigned char mult_burst:1;
-+		unsigned char RT_in_LR:1;
-+		unsigned char reserved1:1;
-+		unsigned char RD_IN_LR:1;
-+		unsigned char reserved2:4;
-+		unsigned char reserved3:8;
-+		unsigned char defect_wr:1;
-+		unsigned char XRC_supported:1;
-+		unsigned char reserved4:1;
-+		unsigned char striping:1;
-+		unsigned char reserved5:4;
-+		unsigned char cfw:1;
-+		unsigned char reserved6:2;
-+		unsigned char cache:1;
-+		unsigned char dual_copy:1;
-+		unsigned char dfw:1;
-+		unsigned char reset_alleg:1;
-+		unsigned char sense_down:1;
-+	} __attribute__ ((packed)) facilities;
-+	unsigned char dev_class;
-+	unsigned char unit_type;
-+	unsigned short no_cyl;
-+	unsigned short trk_per_cyl;
-+	unsigned char sec_per_trk;
-+	unsigned char byte_per_track[3];
-+	unsigned short home_bytes;
-+	unsigned char formula;
-+	union {
-+		struct {
-+			unsigned char f1;
-+			unsigned short f2;
-+			unsigned short f3;
-+		} __attribute__ ((packed)) f_0x01;
-+		struct {
-+			unsigned char f1;
-+			unsigned char f2;
-+			unsigned char f3;
-+			unsigned char f4;
-+			unsigned char f5;
-+		} __attribute__ ((packed)) f_0x02;
-+	} __attribute__ ((packed)) factors;
-+	unsigned short first_alt_trk;
-+	unsigned short no_alt_trk;
-+	unsigned short first_dia_trk;
-+	unsigned short no_dia_trk;
-+	unsigned short first_sup_trk;
-+	unsigned short no_sup_trk;
-+	unsigned char MDR_ID;
-+	unsigned char OBR_ID;
-+	unsigned char director;
-+	unsigned char rd_trk_set;
-+	unsigned short max_rec_zero;
-+	unsigned char reserved1;
-+	unsigned char RWANY_in_LR;
-+	unsigned char factor6;
-+	unsigned char factor7;
-+	unsigned char factor8;
-+	unsigned char reserved2[3];
-+	unsigned char reserved3[6];
-+	unsigned int long_no_cyl;
-+} __attribute__ ((packed));
-+
- /* Get information on a dasd device (enhanced) */
- #define BIODASDINFO   _IOR(DASD_IOCTL_LETTER,1,dasd_information_t)
- 
--- 
-1.6.3.3
-

0016-s390tools-1.8.2-lsreipl-nss.patch

@@ -1,376 +0,0 @@
-From 62fb535a68f1df693869e4361150259b42c6f211 Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Thu, 10 Dec 2009 18:30:52 +0100
-Subject: [PATCH 16/16] s390tools-1.8.2-lsreipl-nss
-
----
- ipl_tools/ccw.c     |   42 ++++++++++++++++---------------------
- ipl_tools/chreipl.h |    9 +++++--
- ipl_tools/fcp.c     |   13 ++++++-----
- ipl_tools/ipl.c     |   57 +++++++++++++++++++++++++++++++-------------------
- ipl_tools/main.c    |   25 +++++++++++++++++-----
- ipl_tools/system.c  |    3 +-
- 6 files changed, 87 insertions(+), 62 deletions(-)
-
-diff --git a/ipl_tools/ccw.c b/ipl_tools/ccw.c
-index 7959831..eef4550 100644
---- a/ipl_tools/ccw.c
-+++ b/ipl_tools/ccw.c
-@@ -52,22 +52,19 @@ int isccwdev(const char *devno)
- }
- 
- 
--int get_ccw_devno_old_sysfs(char *device, char *devno)
-+int get_ccw_devno_old_sysfs(char *device)
- {
- 	FILE *filp;
--	int len, errorpath, rc;
-+	int errorpath;
- 	char path1[4096];
- 	char buf[4096];
--	char *match, *s1, *s2;
-+	char *match = NULL, *s1, *s2;
- 
- 	errorpath = 1;
--	rc = 0;
- 	sprintf(path1, "/sys/block/%s/uevent", device);
- 	filp = fopen(path1, "r");
--	if (!filp) {
--		rc = -1;
--		return rc;
--	}
-+	if (!filp)
-+		return -1;
- 	/*
- 	 * the uevent file contains an entry like this:
- 	 * PHYSDEVPATH=/devices/css0/0.0.206a/0.0.7e78
-@@ -77,16 +74,16 @@ int get_ccw_devno_old_sysfs(char *device, char *devno)
- 		if (match != NULL)
- 			break;
- 	}
-+	fclose(filp);
-+	if (!match)
-+		return -1;
- 	s1 =  strchr(buf, '/');
- 	s2 =  strrchr(buf, '/');
--	len = s2-s1;
--	strncpy(devno, s2 + 1, sizeof(devno));
--	devno[len] = '\0';
--	fclose(filp);
-+	strncpy(devno, s2 + 1, sizeof(devno) - 1);
- 	return 0;
- }
- 
--int get_ccw_devno_new_sysfs(char *device, char *devno)
-+int get_ccw_devno_new_sysfs(char *device)
- {
- 	int len, errorpath, rc;
- 	char path2[4096];
-@@ -119,8 +116,7 @@ int get_ccw_devno_new_sysfs(char *device, char *devno)
- 			return rc;
- 		}
- 	}
--	strncpy(devno, s2 + 1, sizeof(devno));
--	devno[len] = '\0';
-+	strncpy(devno, s2 + 1, sizeof(devno) - 1);
- 	return 0;
- }
- 
-@@ -134,16 +130,14 @@ int get_ccw_devno_new_sysfs(char *device, char *devno)
-  *
-  * This does not work when booting from tape
-  */
--int get_ccw_devno(char *device, char *devno)
-+int get_ccw_devno(char *device)
- {
--    if (get_ccw_devno_old_sysfs(device, devno) != 0) {
--	if (get_ccw_devno_new_sysfs(device, devno) != 0) {
--		fprintf(stderr, "%s: Failed to lookup the device number\n",
--			name);
--		return -1;
--	}
--    }
--    return 0;
-+	if (get_ccw_devno_old_sysfs(device) == 0)
-+		return 0;
-+	if (get_ccw_devno_new_sysfs(device) == 0)
-+		return 0;
-+	fprintf(stderr, "%s: Failed to lookup the device number\n", name);
-+	return -1;
- }
- 
- int get_ccw_dev(char *partition, char *device)
-diff --git a/ipl_tools/chreipl.h b/ipl_tools/chreipl.h
-index 19a83eb..37807a7 100644
---- a/ipl_tools/chreipl.h
-+++ b/ipl_tools/chreipl.h
-@@ -34,6 +34,9 @@ extern char saction[8];
- extern char name[256];
- extern int action;
- 
-+#define IPL_TYPE_LEN_MAX	100
-+#define NSS_NAME_LEN_MAX	8
-+
- #define ACT_CCW		1
- #define ACT_FCP		2
- #define ACT_NODE	3
-@@ -63,10 +66,10 @@ int is_valid_case(char *c);
- int is_valid_action(char *action);
- void parse_shutdown_options(int argc, char **argv);
- void strlow(char *s);
--int get_ccw_devno(char *device, char *devno);
--int get_reipl_type(void);
-+int get_ccw_devno(char *device);
-+int get_reipl_type(char *reipltype);
- void parse_lsreipl_options(int argc, char **argv);
--int get_ipl_type();
-+int get_ipl_type(char *reipltype);
- int get_ipl_loadparam(void);
- void print_ipl_settings(void);
- int get_sa(char *action, char *file);
-diff --git a/ipl_tools/fcp.c b/ipl_tools/fcp.c
-index 86fa95b..7a8b4c5 100644
---- a/ipl_tools/fcp.c
-+++ b/ipl_tools/fcp.c
-@@ -33,12 +33,11 @@
- 
- /*
-  * return the current reipl type from /sys/firmware/reipl/reipl_type
-- * 0 = fcp, 1 = ccw, -1, error
-+ * 0 = fcp, 1 = ccw, 2 = nss, -1 = unknown
-  */
--int get_reipl_type(void)
-+int get_reipl_type(char *reipltype)
- {
- 	FILE *filp;
--	char reipltype[4];
- 	char path[4096];
- 	int rc;
- 
-@@ -49,7 +48,7 @@ int get_reipl_type(void)
- 			fprintf(stderr,	"%s: Can not open /sys/firmware/"
- 				"reipl/reipl_type: ", name);
- 			fprintf(stderr, "%s\n", strerror(errno));
--			return -1;
-+			exit(1);
- 		}
- 		rc = fscanf(filp, "%s", reipltype);
- 		fclose(filp);
-@@ -57,17 +56,19 @@ int get_reipl_type(void)
- 			fprintf(stderr, "%s: Failed to read "
- 				"/sys/firmware/reipl/reipl_type:", name);
- 			fprintf(stderr, "%s\n", strerror(errno));
--			return -1;
-+			exit(1);
- 		}
- 		if (strncmp(reipltype, "fcp", strlen("fcp")) == 0)
- 			return T_FCP;
- 		else if (strncmp(reipltype, "ccw", strlen("ccw")) == 0)
- 			return T_CCW;
--		/* TODO: add NSS support */
-+		else if (strncmp(reipltype, "nss", strlen("nss")) == 0)
-+			return T_NSS;
- 	} else {
- 		fprintf(stderr, "%s: Can not open /sys/firmware/reipl/"
- 			"reipl_type:", name);
- 		fprintf(stderr, " %s\n", strerror(errno));
-+		exit(1);
- 	}
- 	return -1;
- }
-diff --git a/ipl_tools/ipl.c b/ipl_tools/ipl.c
-index 2bf817a..8cca700 100644
---- a/ipl_tools/ipl.c
-+++ b/ipl_tools/ipl.c
-@@ -33,12 +33,11 @@
- 
- /*
-  * return the ipl type based on /sys/firmware/ipl/ipl_type
-- * returns 0 in case of fcp and 1 in case of ccw, -1 otherwise
-+ * returns 0 in case of fcp and 1 in case of ccw, 2 for nss and -1 otherwise
-  */
--int get_ipl_type()
-+int get_ipl_type(char *reipltype)
- {
- 	FILE *filp;
--	char reipltype[4];
- 	char path[4096];
- 	int rc;
- 
-@@ -49,7 +48,7 @@ int get_ipl_type()
- 			fprintf(stderr,	"%s: Can not open /sys/firmware/ipl/"
- 				"ipl_type: ", name);
- 			fprintf(stderr, "%s\n", strerror(errno));
--			return -1;
-+			exit(1);
- 		}
- 		rc = fscanf(filp, "%s", reipltype);
- 		fclose(filp);
-@@ -57,12 +56,14 @@ int get_ipl_type()
- 			fprintf(stderr, "%s: Failed to read "
- 				"/sys/firmware/ipl/ipl_type: ", name);
- 			fprintf(stderr, "%s\n", strerror(errno));
--			return -1;
-+			exit(1);
- 		}
- 		if (strncmp(reipltype, "fcp", strlen("fcp")) == 0)
- 			return T_FCP;
- 		else if (strncmp(reipltype, "ccw", strlen("ccw")) == 0)
- 			return T_CCW;
-+		else if (strncmp(reipltype, "nss", strlen("nss")) == 0)
-+			return T_NSS;
- 	} else {
- 		fprintf(stderr, "%s: Can not open /sys/firmware/ipl/"
- 			"ipl_type:", name);
-@@ -111,30 +112,38 @@ int get_ipl_loadparam(void)
- void print_ipl_settings(void)
- {
- 	int rc, type;
--	char bootprog[1024], lba[1024];
-+	char bootprog[1024], lba[1024], nss_name[NSS_NAME_LEN_MAX + 1];
-+	char reipltype[IPL_TYPE_LEN_MAX + 1];
- 
--	type = get_ipl_type();
--	/*
--	 * TODO: add nss support
--	 */
--	if (type == 1)
-+	type = get_ipl_type(reipltype);
-+	switch (type) {
-+	case T_NSS:
-+		printf("IPL type:      nss\n");
-+		rc = strrd(nss_name, "/sys/firmware/ipl/name");
-+		if (rc != 0)
-+			exit(1);
-+		printf("Name:          %s\n", nss_name);
-+		break;
-+	case T_CCW:
- 		printf("IPL type:      ccw\n");
--	if (type == 0)
--		printf("IPL type:      fcp\n");
--	rc = strrd(devno, "/sys/firmware/ipl/device");
--	if (rc != 0)
--		exit(1) /* the error msg comes from get_ipl_device */;
--	if (strlen(devno) > 0)
--		printf("Device:        %s\n", devno);
--	if (type == 1) {
-+		rc = strrd(devno, "/sys/firmware/ipl/device");
-+		if (rc != 0)
-+			exit(1);
-+		if (strlen(devno) > 0)
-+			printf("Device:        %s\n", devno);
- 		rc = get_ipl_loadparam();
- 		if (rc != -1)
- 			printf("Loadparm:      %d\n", rc);
- 		else
- 			printf("Loadparm:      \n");
--	}
--	if (type == 0) {
--		/* these settings are only available for fcp */
-+		break;
-+	case T_FCP:
-+		printf("IPL type:      fcp\n");
-+		rc = strrd(devno, "/sys/firmware/ipl/device");
-+		if (rc != 0)
-+			exit(1);
-+		if (strlen(devno) > 0)
-+			printf("Device:        %s\n", devno);
- 		rc = strrd(wwpn, "/sys/firmware/reipl/fcp/wwpn");
- 		if (rc != -1 && strlen(wwpn) > 0)
- 			printf("WWPN:          %s\n", wwpn);
-@@ -147,6 +156,10 @@ void print_ipl_settings(void)
- 		rc = strrd(lba, "/sys/firmware/ipl/br_lba");
- 		if (rc != -1 &&  strlen(lba) > 0)
- 			printf("br_lba:        %s\n", lba);
-+		break;
-+	default:
-+		printf("IPL type:      %s (unknown)\n", reipltype);
-+		break;
- 	}
- 	exit(0);
- }
-diff --git a/ipl_tools/main.c b/ipl_tools/main.c
-index 2eaa043..bcebabe 100644
---- a/ipl_tools/main.c
-+++ b/ipl_tools/main.c
-@@ -57,13 +57,22 @@ int action;		/* either CCW, FCP or NODE */
- int lsreipl(int argc, char *argv[])
- {
- 	int rc;
--	char bootprog[1024], lba[1024], val[9];
-+	char bootprog[1024], lba[1024], val[9], reipltype[IPL_TYPE_LEN_MAX + 1];
-+	char nss_name[NSS_NAME_LEN_MAX + 1];
- 
- 	/* parse the command line options in getop.c */
- 	parse_lsreipl_options(argc, argv);
- 
--	rc = get_reipl_type();
--	if (rc == 0) {
-+	rc = get_reipl_type(reipltype);
-+	switch (rc) {
-+	case T_NSS:
-+		printf("Re-IPL type:   nss\n");
-+		rc = strrd(nss_name, "/sys/firmware/reipl/nss/name");
-+		if (rc != 0)
-+			exit(1);
-+		printf("Name:          %s\n", nss_name);
-+		break;
-+	case T_FCP:
- 		printf("Re-IPL type: fcp\n");
- 		rc = strrd(wwpn, "/sys/firmware/reipl/fcp/wwpn");
- 		if (rc != 0)
-@@ -90,8 +99,8 @@ int lsreipl(int argc, char *argv[])
- 			printf("bootprog:    %s\n", bootprog);
- 		if (strlen(lba) > 0)
- 			printf("br_lba:      %s\n", lba);
--	}
--	if (rc == 1) {
-+		break;
-+	case T_CCW:
- 		printf("Re-IPL type:   ccw\n");
- 		rc = strrd(devno, "/sys/firmware/reipl/ccw/device");
- 		if (rc != 0)
-@@ -106,6 +115,10 @@ int lsreipl(int argc, char *argv[])
- 			printf("Loadparm:      %s\n", val);
- 		else
- 			printf("Loadparm:      \n");
-+		break;
-+	default:
-+		printf("Re-IPL type: %s (unknown)\n", reipltype);
-+		break;
- 	}
- 	return 0;
- }
-@@ -134,7 +147,7 @@ int reipl(int argc, char *argv[])
- 					"partition: %s\n", name, partition);
- 				exit(1);
- 			}
--			rc = get_ccw_devno(device, devno);
-+			rc = get_ccw_devno(device);
- 			if (rc != 0)  {
- 				fprintf(stderr, "%s: Unable to lookup device"
- 					" number for device %s\n", name,
-diff --git a/ipl_tools/system.c b/ipl_tools/system.c
-index fd5b76b..ca6c5af 100644
---- a/ipl_tools/system.c
-+++ b/ipl_tools/system.c
-@@ -174,7 +174,7 @@ int strrd(char *string, char *file)
- 			fprintf(stderr, "%s\n", strerror(errno));
- 			exit(1);
- 		}
--		rc = fread(string, 4096, 1, filp);
-+		rc = fread(string, 1, 4096, filp);
- 		fclose(filp);
- 		/*
- 		 *  special handling is required for
-@@ -193,6 +193,7 @@ int strrd(char *string, char *file)
- 			fprintf(stderr, "%s\n", strerror(errno));
- 			return -1;
- 		} else {
-+			string[rc] = 0;
- 			if (string[strlen(string) - 1] == '\n')
- 				string[strlen(string) - 1] = 0;
- 			return 0;
--- 
-1.6.3.3
-

0018-fix-uppercase-conversion-in-lscss.patch

@@ -1,38 +0,0 @@
-From a8bcc744ec941c3b34c22c7a7729b52a390c7a08 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Wed, 13 Jan 2010 08:39:09 +0100
-Subject: [PATCH] fix uppercase conversion in lscss
-
-Description: lscss: fix uppercase conversion
-Symptom:     when invoking the -u option, lscss will fail with the message "tr: missing operand"
-Problem:     the bash option "nullglob" interferes with the tr operands
-Solution:    avoid expanding of those operands by placing quotes around them
----
- zconf/lscss |    4 ++--
- 1 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/zconf/lscss b/zconf/lscss
-index efdb9ca..fc40fe6 100755
---- a/zconf/lscss
-+++ b/zconf/lscss
-@@ -354,7 +354,7 @@ if [ $SCH_IO ] ;then
- 	echo "----------------------------------------------------------------------"
-     fi
-     print_io | if [ $UPPERCASE ] ;then
--	tr [:lower:] [:upper:]
-+	tr "[:lower:]" "[:upper:]"
-     else
- 	cat -
-     fi
-@@ -368,7 +368,7 @@ if [ $SCH_CHSC ] ;then
-     echo "Device   Subchan."
-     echo "-----------------"
-     print_chsc | if [ $UPPERCASE ] ;then
--	tr [:lower:] [:upper:]
-+	tr "[:lower:]" "[:upper:]"
-     else
- 	cat -
-     fi
--- 
-1.6.5.2
-

0019-ziorep-fix-return-codes.patch

@@ -1,53 +0,0 @@
-From a8ffd7242da2adcc4ab5b0f23193cfe764dc376d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Wed, 20 Jan 2010 08:42:52 +0100
-Subject: [PATCH 19/22] ziorep: fix return codes
-
-Description: ziomon: ziorep tools return 1 when using options -h and -v
-Symptom:     Using ziorep_traffic/utilization with these options give an
-error.
-Problem:     1 as been introduced as rc for parse_parms besides error codes,
-but is not distinguished from them when parse_params is called.
-Solution:    After calling  parse_parms check for rc 1 and substitute through 0.
----
- ziomon/ziorep_traffic.cpp     |    5 ++++-
- ziomon/ziorep_utilization.cpp |    5 ++++-
- 2 files changed, 8 insertions(+), 2 deletions(-)
-
-diff --git a/ziomon/ziorep_traffic.cpp b/ziomon/ziorep_traffic.cpp
-index 1461e55..20ee32f 100644
---- a/ziomon/ziorep_traffic.cpp
-+++ b/ziomon/ziorep_traffic.cpp
-@@ -529,8 +529,11 @@ int main(int argc, char **argv)
- 	verbose = 0;
- 
- 	init_opts(&opts);
--	if ( (rc = parse_params(argc, argv, &opts)) )
-+	if ( (rc = parse_params(argc, argv, &opts)) ) {
-+		if (rc == 1)
-+			rc = 0;
- 		goto out;
-+	}
- 	if ( (rc = check_opts(&opts, &cfg)) )
- 		goto out;
- 
-diff --git a/ziomon/ziorep_utilization.cpp b/ziomon/ziorep_utilization.cpp
-index 3f57a47..ac4576f 100644
---- a/ziomon/ziorep_utilization.cpp
-+++ b/ziomon/ziorep_utilization.cpp
-@@ -352,8 +352,11 @@ int main(int argc, char **argv)
- 	verbose = 0;
- 
- 	init_opts(&opts);
--	if ( (rc = parse_params(argc, argv, &opts)) )
-+	if ( (rc = parse_params(argc, argv, &opts)) ) {
-+		if (rc == 1)
-+			rc = 0;
- 		goto out;
-+	}
- 	if ( (rc = check_opts(&opts, &cfg)) )
- 		goto out;
- 
--- 
-1.6.5.2
-

0020-lstape-fix-return-code.patch

@@ -1,31 +0,0 @@
-From 72ec5b5bd9a7fd23e2d1aaed455df8f2bda952ca Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Wed, 20 Jan 2010 08:44:43 +0100
-Subject: [PATCH 20/22] lstape: fix return code
-
-Description: lstape: help function returns 1, although it was successful
-Symptom:     Issuing "lstape -h" or "lstape --help" and then looking for the
-error code on the console through e.g. "echo $?" shows 1. Which
-looks like an error.
-Problem:     exit 1, where we chould have exit 0.
-Solution:    Return 0 after calling the help function with exit 0.
----
- zconf/lstape |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/zconf/lstape b/zconf/lstape
-index efacfc9..5671315 100755
---- a/zconf/lstape
-+++ b/zconf/lstape
-@@ -90,7 +90,7 @@ while [ $# -ne 0 ]; do
- 	case $1 in
- 		-h|--help)
- 			PrintUsage
--			exit 1
-+			exit 0
- 			;;
- 		-t|--type)
- 			if [ $# -lt 2 ]; then
--- 
-1.6.5.2
-

0021-cpuplugd-fix-reading-the-size-of-proc-sys-vm-cmm_pag.patch

@@ -1,32 +0,0 @@
-From d3c4eb2ced3a8e3c8f7a528f88721324028534e9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Wed, 20 Jan 2010 08:46:14 +0100
-Subject: [PATCH 21/22] cpuplugd: fix reading the size of /proc/sys/vm/cmm_pages
-
-Description: cpuplugd: fix fscanf file handling in get_cmmpages_size
-Symptom:     cpuplugd was not able to correctly read the size of the
-/proc/sys/vm/cmm_pages file. This prevented cpuplugd from using
-the cmm feature correctly.
-Problem:     The code checked for the wrong return code (!= 0 instead of ==0)
-Solution:    Check for the right return code in the get_cmmpages_size error
-handling function.
----
- cpuplugd/mem.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/cpuplugd/mem.c b/cpuplugd/mem.c
-index a8f2a8e..8d5f05f 100644
---- a/cpuplugd/mem.c
-+++ b/cpuplugd/mem.c
-@@ -230,7 +230,7 @@ int get_cmmpages_size()
- 		return -1;
- 	}
- 	rc = fscanf(filp, "%d", &size);
--	if (rc != 0) {
-+	if (rc == 0) {
- 		fprintf(stderr, "Can not read /proc/sys/vm/cmm_pages: %s\n",
- 				strerror(errno));
- 		if (foreground == 0)
--- 
-1.6.5.2
-

0022-lsqeth-support-new-attributes.patch

@@ -1,74 +0,0 @@
-From c986172e782ae2afa41209e7c238315175d589e1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Wed, 20 Jan 2010 08:48:52 +0100
-Subject: [PATCH 22/22] lsqeth: support new attributes
-
-Description: lsqeth: add recent qeth attributes
-Symptom:     no information about "isolation" and "sniffer" values
-Problem:     new sysfs attributes "isolation" and "sniffer" not mentioned in
-lsqeth output.
-Solution:    add attributes "isolation" and "sniffer" to lsqeth.
----
- README       |    2 ++
- zconf/lsqeth |   11 +++++++----
- 2 files changed, 9 insertions(+), 4 deletions(-)
-
-diff --git a/README b/README
-index 30ba06f..7c75563 100644
---- a/README
-+++ b/README
-@@ -192,6 +192,8 @@ Release History:
- 
-     - lscss: Also show devices on the defunct subchannel.
- 
-+    - lsqeth: add attributes "isolation" and "sniffer"
-+
-     - all: Reworked s390-tools build process.
- 
-     Bug Fixes:
-diff --git a/zconf/lsqeth b/zconf/lsqeth
-index 9b155e9..b1c2809 100755
---- a/zconf/lsqeth
-+++ b/zconf/lsqeth
-@@ -3,7 +3,7 @@
- #  File...........: lsqeth
- #  Author(s)......: Steffen Thoss	<thoss@de.ibm.com>
- #  		    Peter Tiedemann	<ptiedem@de.ibm.com>
--#  Copyright IBM Corp. 2004, 2009
-+#  Copyright IBM Corp. 2004, 2010
- # 
- #  History of changes:
- # 
-@@ -63,7 +63,9 @@ output_array=( if_name
- 	       buffer_count 
- 	       add_hhlen
- 	       layer2 
--	       large_send )
-+	       large_send
-+	       isolation
-+	       sniffer )
- # Array for sysfs values
- sysfs_entries=( "sw checksumming" "hw checksumming" "no checksumming"
- 		"always queue 0" "always queue 1" 
-@@ -87,7 +89,7 @@ parp_array=0
- function PrintVersion
- {
-         echo "$script_name: version %S390_TOOLS_VERSION%" 
--	echo "Copyright IBM Corp. 2003, 2009"
-+	echo "Copyright IBM Corp. 2003, 2010"
- }
- 
- 
-@@ -308,7 +310,8 @@ function __print_normal_format
- function __layer2_print
- {
- 	del_layer2=( route4 route6
--		     fake_ll fake_broadcast )
-+		     fake_ll fake_broadcast
-+		     sniffer )
- 
- 	for l in ${del_layer2[@]}
-  		do
--- 
-1.6.5.2
-

0023-znetconf-use-hex-index-for-chpidtype-table.patch

@@ -1,47 +0,0 @@
-From 3ca0d01240ab14ab3217985bf8ed9c89111e36c9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Wed, 3 Feb 2010 13:17:41 +0100
-Subject: [PATCH] znetconf: use hex index for chpidtype table
-
-Description: znetconf: index into chpidtype lookup table must be hex.
-Symptom:     Network subchannels with CHPID type containing non-decimal digits,
-	     i.e. a-f, cause lsznet.raw errors like the following:
-	     1a: value too great for base (error token is "1a")
-Problem:     The value of the sysfs attribute "type" of a CHPID is hex,
-	     but the lookup table index in the bash script must be decimal.
-Solution:    Interpret "type" as hex number when used as lookup table index.
----
- zconf/lsznet.raw |   10 +++++-----
- 1 files changed, 5 insertions(+), 5 deletions(-)
-
-diff --git a/zconf/lsznet.raw b/zconf/lsznet.raw
-index e5643ee..9821ba3 100755
---- a/zconf/lsznet.raw
-+++ b/zconf/lsznet.raw
-@@ -68,10 +68,10 @@ readonly -a CU_GROUPCHANNELS=(
- )
- 
- readonly -a CHPIDTYPES=(
--    [10]=OSE
--    [11]=OSD
--    [15]=OSN
--    [24]=IQD
-+    [0x10]=OSE
-+    [0x11]=OSD
-+    [0x15]=OSN
-+    [0x24]=IQD
- )
- 
- # whitelist of network devices for TCP/IP stack, e.g. for Linux installers
-@@ -116,7 +116,7 @@ function search_cu_tcpip() {
- # Always succeeds and returns 0.
- function search_chpt() {
-     local chpidtype_number=$1
--    chpidtype_symbolic=${CHPIDTYPES[$chpidtype_number]}
-+    chpidtype_symbolic=${CHPIDTYPES[$((0x$chpidtype_number))]}
-     if [ "$chpidtype_symbolic" == "" ]; then
-         chpidtype_symbolic="?"
-     fi
--- 
-1.6.6
-

0024-zipl-handle-SSCH-status.patch

@@ -1,230 +0,0 @@
-From 9c94d906621e775f005fa34583671f08000f1723 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Thu, 4 Feb 2010 13:07:30 +0100
-Subject: [PATCH] zipl: handle SSCH status
-
-Description: zipl: handle status during IPL SSCH
-Symptom:     System enters disabled wait during IPL of DASD disk when an
-	     unexpected status (e.g. triggered by a flashcopy operation)
-	     is recognized on the IPL device.
-Problem:     Unexpected status is not handled correctly during the SSCH
-	     portion of the IPL code.
-Solution:    Introduce a more robust SSCH result handling which performs
-	     retries and clears status when encountering errors.
----
- zipl/boot/common.S |  163 +++++++++++++++++++++++++++++++++++-----------------
- zipl/boot/eckd2.S  |    1 -
- zipl/boot/fba2.S   |    1 -
- 3 files changed, 110 insertions(+), 55 deletions(-)
-
-diff --git a/zipl/boot/common.S b/zipl/boot/common.S
-index fa45e5a..108dbbf 100644
---- a/zipl/boot/common.S
-+++ b/zipl/boot/common.S
-@@ -249,69 +249,126 @@ _disable_device:
- 	.endm	
- 
- 	.macro io_subroutines
-+
-+
-+__LC_IO_NEW_PSW		= 0x78
-+__LC_SUBCHANNEL_ID	= 0xb8
-+
-+#
-+# Wait for I/O interrupt.
-+#
-+# Wait until status for the specified subchannel is available.
-+#
-+#   %r2 : subchannel id
-+#   %r3 : address of irb
-+#
-+
-+_wait_for_int:
-+	lr     %r1,%r2
-+	basr   %r4,0			# get base register
-+0:
-+	mvc    __LC_IO_NEW_PSW(8),4f-0b(%r4) # set i/o new psw
-+1: # wait
-+	lpsw   3f-0b(%r4)
-+2: # continue
-+	tsch   0(%r3)			# get status
-+	brc    4,1b			# if cc=1 goto wait
-+	br     %r14			# return
-+        .align 8
-+3:
-+	.long  0x020a0000,0x80000000+1b	# enabled wait psw
-+4:
-+	.long  0x00080000,0x80000000+2b	# io new psw
-+
- #
- # Start I/O
--#   %r2 : device subchannel id
-+#
-+# Attempt to start I/O defined by ORB on specified subchannel. Retry I/O
-+# 256 times per path (recommended error recovery procedure for IFCCs) unless
-+# a permanent path error condition is indicated. Try all paths twice to try to
-+# work around "link flapping" (paths going down once each in the same order as
-+# they are tried). Perform CLEAR SUBCHANNEL when switching paths to clear any
-+# improper subchannel status.
-+#
-+#   %r2 : subchannel id
- #   %r3 : address of orb
- #   %r4 : address of irb
--#   %r5 : retry count
- #
- _ssch:
--        stm    %r6,%r15,24(%r15)
--        basr   %r13,0                   # base register
--0:      s      %r15,6f-0b(%r13)         # create stack frame
--	lr     %r12,%r2                 # save subchannel id
--	lr     %r11,%r3                 # save orb
--	lr     %r10,%r4                 # save irb
--	lr     %r9,%r5                  # save retry count
--	ic     %r0,.Llpm-0b(%r13)	# copy lpm to orb lpm
--	stc    %r0,6(%r3)
--1:	lr     %r1,%r12
--	ssch   0(%r11)                  # go
--        bnz    4f-0b(%r13)              # houston, we have a problem
--2:	lr     %r2,%r12                 # call _wait4de with subchannel id
--	lr     %r3,%r10                 # and irb address as parameters
--	bas    %r14,_wait4de-0b(%r13)   # wait until DE or error
--	tm     9(%r10),0xff             # test channel status
--	bnz    4f-0b(%r13)
--	tm     8(%r10),0xf3             # test device status
--	bz     5f-0b(%r13)
--	bct    %r9,1b-0b(%r13)          # something went wrong, retry.
--4:	l      %r2,7f-0b(%r13)
--	bas    %r4,_panik-0b(%r13)      # won't return
--5:	lm     %r6,%r15,120(%r15)
--        br     %r14
--6:	.long  96
--7:      .long  ESSCH
-+	stm    %r6,%r15,24(%r15)
-+	basr   %r13,0			# get base register
-+0:
-+	ahi    %r15,-96			# create stack frame
-+	lr     %r6,%r2			# r6:  sid
-+	lr     %r7,%r3			# r7:  orb
-+	lr     %r8,%r4			# r8:  irb
-+	sr     %r9,%r9			# r9:  initial lpm
-+	ic     %r9,.Llpm-0b(%r13)
-+	l      %r10,.Lmask-0b(%r13)	# r10: path mask
-+1: # restart_all
-+	lhi    %r11,256			# r11: retry counter
-+2: # restart
-+	stc    %r9,6(%r7)		# store initial lpm in orb
-+	ltr    %r9,%r9			# if non-zero initial lpm
-+	jne    3f			# then use initial lpm
-+	stc    %r10,6(%r7)		# else use current path mask
-+3: # gotlpm
-+	lr     %r1,%r6			# get sid
-+	ssch   0(%r7)			# start subchannel
-+	brc    1,7f			# if cc==3 goto next_path
-+	brc    7,6f                     # if cc!=0 goto retry
-+4: # wait_for_int_loop
-+	lr     %r2,%r6			# get sid
-+	lr     %r3,%r8			# get irb
-+	bras   %r14,_wait_for_int	# wait for interrupt
-+	jnz    9f			# if cc!=0 goto panic
-+	tm     0(%r8),0x3		# test irb deferred cc
-+	brc    1,7f			# if cc==3 goto next_path
-+	jz     5f			# if cc==0 goto no_stctl_check
-+	tm     3(%r8),0x10		# test irb status control
-+	jnz    6f			# if alert goto retry
-+5: # no_stctl_check
-+	tm     9(%r8),0xff		# test irb subchannel status
-+	jnz    6f			# if status!=0 goto retry
-+	tm     8(%r8),0xf3		# test irb unusual device status
-+	jnz    6f			# if status!=0 goto retry
-+	tm     8(%r8),0x4		# test irb device end
-+	jz     4b			# if !device_end goto wait_for_int_loop
-+	lm     %r6,%r15,120(%r15)
-+	br     %r14			# return
-+
-+6: # retry
-+	lr     %r1,%r6			# get sid
-+	tsch   0(%r8)			# clear status if necessary
-+	brct   %r11,2b			# if --retries>0 goto restart
-+7: # next_path
-+	ltr    %r9,%r9			# if initial lpm != 0
-+	jnz    8f			# then goto noshift
-+	srl    %r10,1			# path_mask >>= 1
-+	ltr    %r10,%r10		# if path_mask==0
-+	jz     9f			# then goto panic
-+8: # noshift
-+	sr     %r9,%r9			# clear initial lpm
-+	lr     %r1,%r6			# get sid
-+	csch				# clear subchannel
-+	brc    7,9f			# if cc!=0 goto panic
-+	lr     %r2,%r6			# get sid
-+	lr     %r3,%r8			# get irb
-+	bras   %r14,_wait_for_int	# wait for interrupt
-+	j      1b			# goto restart_all
-+9: # panic
-+	l      %r2,.Lerrno-0b(%r13)	# get error code
-+	bras   %r14,_panik		# panic
-+
-+.Lerrno:
-+	.long  ESSCH
-+.Lmask:
-+	.long  0x8080
- .Llpm:
--	.byte  0xff
-+	.byte  0x00
- 	.align 2
- 
- #
--# Wait for interrupt subroutine
--#   %r2 : device subchannel id
--#   %r3 : address of irb
--#
--_wait4de:
--	lr     %r1,%r2
--	basr   %r4,0
--0:      mvc    0x78(8),5f-0b(%r4)       # set i/o new psw
--1:	lpsw   4f-0b(%r4)
--2:      c      %r1,0xb8                 # compare subchannel id
--        bne    1b-0b(%r4)               # unequal -> continue waiting
--	tsch   0(%r3)
--	tm     9(%r3),0xff              # test channel status
--	bnz    3f-0b(%r4)
--	tm     8(%r3),0xf3              # got something unusual ?
--	bnz    3f-0b(%r4)
--        tm     8(%r3),0x04              # got device end ?
--        bz     1b-0b(%r4)               # still busy -> continue waiting
--3:      br     %r14
--        .align 8
--4:	.long  0x020a0000,0x80000000+1b
--5:	.long  0x00080000,0x80000000+2b # io new psw
--
--#
- # Panik routine. Loads a disabled wait psw
- #   %r2 : panik code
- #
-diff --git a/zipl/boot/eckd2.S b/zipl/boot/eckd2.S
-index ba71db9..b59ab0e 100644
---- a/zipl/boot/eckd2.S
-+++ b/zipl/boot/eckd2.S
-@@ -85,7 +85,6 @@ _load_direct:
-         la     %r3,.Lorb-.Lbase(%r13)   # pass address of orb
-         la     %r4,.Lirb-.Lbase(%r13)   # and pass address of irb
- 	lr     %r2,%r11                 # pass subchannel id
--        la     %r5,5                    # 5 retries
-         bas    %r14,_ssch-.Lbase(%r13)  # read records
- .Lexit:
-         lr     %r2,%r12                 # return updated load address
-diff --git a/zipl/boot/fba2.S b/zipl/boot/fba2.S
-index 82b1447..90bb2cd 100644
---- a/zipl/boot/fba2.S
-+++ b/zipl/boot/fba2.S
-@@ -98,7 +98,6 @@ _load_direct:
- 	lr     %r2,%r11                 # pass subchannel id
- 	la     %r3,.Lorb-.Lbase(%r13)   # pass address of orb
- 	la     %r4,.Lirb-.Lbase(%r13)   # and pass address of irb
--	la     %r5,5                    # 5 retries
-         bas    %r14,_ssch-.Lbase(%r13)  # read up to 128 blocks
- 	b      .Lmain-.Lbase(%r13)
- .Lexit:	lr     %r2,%r12                 # return updated load address
--- 
-1.6.6
-

0025-vmconvert-shows-garbage-in-progress-bar.patch

@@ -1,39 +0,0 @@
-From 04859d2270d1327873e1e8825bdd9d0eaf73f5cc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Wed, 10 Mar 2010 11:52:18 +0100
-Subject: [PATCH] vmconvert shows garbage in progress bar
-
-Description: vmconvert: Progress bar shows garbage
-Symptom:     The progress bar shows control characters at end of line.
-Problem:     One variable responsible for the progress bar has not been
-initialized.
-Solution:    Initialize variable.
----
- vmconvert/dump.cpp |    3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
-diff --git a/vmconvert/dump.cpp b/vmconvert/dump.cpp
-index f306b27..b4c97d6 100644
---- a/vmconvert/dump.cpp
-+++ b/vmconvert/dump.cpp
-@@ -46,8 +46,8 @@ ProgressBar::initProgress(void)
- void 
- ProgressBar::displayProgress(uint64_t value, uint64_t maxValue)
- {
-+	char progress_bar[51];
- 	int j;
--	char progress_bar[50];
- 
- 	if (progressPercentage == (int) (value * 100 / maxValue))
- 		fprintf(stderr, "%6lld of %6lld |\r",
-@@ -58,6 +58,7 @@ ProgressBar::displayProgress(uint64_t value, uint64_t maxValue)
- 			progress_bar[j] = '#';
- 		for (j = progressPercentage / 2; j < 50; j++)
- 			progress_bar[j] = '-';
-+		progress_bar[50] = 0;
- 		fprintf(stderr, "%6lld of %6lld |%s| %3d%%  \r",
- 			(long long) value, (long long) maxValue,
- 			progress_bar, progressPercentage);
--- 
-1.6.6.1
-

0026-zipl-zfcp-dump-partition-error.patch

@@ -1,32 +0,0 @@
-From 18bc3ce1055c350aaa50696e53baad984f573697 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Thu, 11 Mar 2010 08:34:32 +0100
-Subject: [PATCH] zipl: zfcp dump partition error
-
-Description: zipl: zfcp dump partition error
-Symptom:     When configuring the zfcp dump partition in zipl.conf the
-partition information may be wrong.
-Problem:     The info data structure is used after it was freed.
-Solution:    Free the info structure when it is not used any more.
----
- zipl/src/bootmap.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/zipl/src/bootmap.c b/zipl/src/bootmap.c
-index 526aa48..043a562 100644
---- a/zipl/src/bootmap.c
-+++ b/zipl/src/bootmap.c
-@@ -689,9 +689,9 @@ get_dump_fs_parmline(char* partition, char* parameters, uint64_t mem,
- 		disk_free_info(info);
- 		return -1;
- 	}
--	disk_free_info(info);
- 	buffer = create_dump_fs_parmline(parameters, "/dev/ram0", info->partnum,
- 					 mem, 1);
-+	disk_free_info(info);
- 	if (buffer == NULL)
- 		return -1;
- 	*result = buffer;
--- 
-1.6.6.1
-

0027-zfcpdump-disable-memory-cgroups.patch

@@ -1,34 +0,0 @@
-From cc672d10ef6ee3da060649fa595ed9d980e5e60e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Mon, 22 Mar 2010 12:58:13 +0100
-Subject: [PATCH] zfcpdump - disable memory cgroups
-
-Description: zipl/zfcpdump: Use "cgroup_disable=memory" kernel parameter
-Symptom:     Out of memory kernel panic during SCSI dump.
-Problem:     The zfcpdump kernel has to run within a 32 MB limit. When
-	using "memory cgroups" about 2.6 MB are allocated, which leads
-	to memory problems for zfcpdump.
-Solution:    For zfcpdump we do not need "memory cgroups". Therefore this patch
-	adds the kernel parameter "cgroup_disable=memory" to save 2.5 MB
-	of memory.
----
- zipl/src/bootmap.c |    3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
-diff --git a/zipl/src/bootmap.c b/zipl/src/bootmap.c
-index 043a562..69f721e 100644
---- a/zipl/src/bootmap.c
-+++ b/zipl/src/bootmap.c
-@@ -653,7 +653,8 @@ create_dump_fs_parmline(const char* parmline, const char* root_dev,
- 	if (!result)
- 		return NULL;
- 	snprintf(result, DUMP_PARAM_MAX_LEN, "%s%sroot=%s dump_part=%d "
--		 "dump_mem=%lld maxcpus=%d", parmline ? parmline : "",
-+		 "dump_mem=%lld maxcpus=%d cgroup_disable=memory",
-+		 parmline ? parmline : "",
- 		 parmline ? " " : "", root_dev, part_num,
- 		 (unsigned long long) mem, max_cpus);
- 	result[DUMP_PARAM_MAX_LEN - 1] = 0;
--- 
-1.6.6.1
-

0028-fix-df-usage-in-ziomon.patch

@@ -1,29 +0,0 @@
-From b0238ed360f65ecbf095d89c43c420ed036e4ff0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Mon, 22 Mar 2010 15:21:55 +0100
-Subject: [PATCH] fix df usage in ziomon
-
-Description: ziomon: Fix 'df' command usage
-Symptom:     Long device names could not be parsed properly.
-Problem:     Long device names were split accross multiple lines.
-Solution:    Use df with the right options.
----
- ziomon/ziomon |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/ziomon/ziomon b/ziomon/ziomon
-index 924c1dd..ea910fc 100755
---- a/ziomon/ziomon
-+++ b/ziomon/ziomon
-@@ -709,7 +709,7 @@ function check_size_requirements() {
-    (( estimated_size=$total_num_records * $size_per_record ));
-    debug "    estimated size: $estimated_size Bytes";
-    (( estimated_size=$estimated_size / 1000000 ));
--   (( free_space = `df -k $logpath | tail -n 1 | awk '{print $4}'` / 1024 ));
-+   free_space=`df -mP $logpath | tail -n 1 | awk '{print $4}'`;
-    debug "    free space on '$logpath': $free_space MBytes";
-    if [ "$WRP_SIZE" == "" ]; then
-       echo "NOTE: No size limit specified, run without a limit.";
--- 
-1.6.6.1
-

0029-ziomon-remove-check-for-ziorep_config-availability.patch

@@ -1,102 +0,0 @@
-From 2ec256f9dab30a57f60c83f7cd9b127c25b6cdd6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Thu, 25 Mar 2010 14:11:31 +0100
-Subject: [PATCH] ziomon: remove check for ziorep_config availability
-
-Description: ziomon: Remove check for ziorep_config availability
-Symptom:     ziorep_config could not be found
-Problem:     The path for ziorep_config was hardcoded and checked
-	for to detect install errors.  However, as distributions
-	install these files in varying directories, install issues
-	should be avoided by distributors to begin with, and
-	especially since the debug trace helps to detect these,
-	this check is not really necessary and obviously causing
-	more harm than it helps.
-Solution:    Config is read from PATH.
----
- ziomon/ziorep_cfgreader.cpp |   24 +++++-------------------
- ziomon/ziorep_cfgreader.hpp |    2 --
- 2 files changed, 5 insertions(+), 21 deletions(-)
-
-diff --git a/ziomon/ziorep_cfgreader.cpp b/ziomon/ziorep_cfgreader.cpp
-index c64c150..a8f424f 100644
---- a/ziomon/ziorep_cfgreader.cpp
-+++ b/ziomon/ziorep_cfgreader.cpp
-@@ -18,7 +18,7 @@
- #include "ziorep_utils.hpp"
- 
- #define	ZIOREP_CFG_EXTENSION	".cfg"
--#define ZIOREP_CONFIG_PATH	"/sbin/ziorep_config"
-+#define ZIOREP_CONFIG		"ziorep_config"
- 
- extern const char *toolname;
- extern int verbose;
-@@ -158,18 +158,6 @@ int ConfigReader::filter_unused_devices(const char *filename)
- }
- 
- 
--int ConfigReader::check_ziorep_config() const
--{
--	if (access(ZIOREP_CONFIG_PATH, F_OK | R_OK | X_OK)) {
--		fprintf(stderr, "%s: Cannot access " ZIOREP_CONFIG_PATH
--			". Please check your installation and try again.\n", toolname);
--		return -1;
--	}
--
--	return 0;
--}
--
--
- int ConfigReader::check_config_file(const char *fname) const
- {
- 	char *tmp;
-@@ -204,8 +192,6 @@ int ConfigReader::extract_config_data(const char *fname)
- 
- 	// Try to extract to .config first, which will be permanently cached
- 	verbose_msg("No data cached, extract\n");
--	if (check_ziorep_config())
--		return -1;
- 
- 	fprintf(stdout, "Extracting config data...");
- 	fflush(stdout);
-@@ -215,8 +201,8 @@ int ConfigReader::extract_config_data(const char *fname)
- 		if (extract_tmp(fname)) {
- 			fprintf(stderr, "%s: Could not extract"
- 				" configuration data. Check the integrity of"
--				" %s%s with %s and retry.", toolname, fname,
--				ZIOREP_CFG_EXTENSION, ZIOREP_CONFIG_PATH);
-+				" %s%s with %s and retry.\n", toolname, fname,
-+				ZIOREP_CFG_EXTENSION, ZIOREP_CONFIG);
- 			return -1;
- 		}
- 	}
-@@ -286,11 +272,11 @@ int ConfigReader::extract(const char *fname)
- 	char *cmd = NULL;
- 
- 	// /sbin/ziorep_config -I -i <fname.cfg> > <file> 2>/dev/null
--	cmd = (char*)malloc(strlen(ZIOREP_CONFIG_PATH) + 7 + strlen(fname)
-+	cmd = (char*)malloc(strlen(ZIOREP_CONFIG) + 7 + strlen(fname)
- 		     + strlen(ZIOREP_CFG_EXTENSION) + 3 + strlen(m_tmp_file)
- 		     + 12 + 1);
- 
--	sprintf(cmd, "%s -I -i %s%s > %s 2>/dev/null", ZIOREP_CONFIG_PATH, fname,
-+	sprintf(cmd, "%s -I -i %s%s > %s 2>/dev/null", ZIOREP_CONFIG, fname,
- 		ZIOREP_CFG_EXTENSION, m_tmp_file);
- 
- 	verbose_msg("Issue command: %s\n", cmd);
-diff --git a/ziomon/ziorep_cfgreader.hpp b/ziomon/ziorep_cfgreader.hpp
-index 94e612b..3053633 100644
---- a/ziomon/ziorep_cfgreader.hpp
-+++ b/ziomon/ziorep_cfgreader.hpp
-@@ -138,8 +138,6 @@ private:
- 	 * in the actual data, and remove anything that is unused */
- 	int filter_unused_devices(const char *filename);
- 
--	int check_ziorep_config() const;
--
- 	int check_config_file(const char *fname) const;
- 
- 	int extract_config_data(const char *fname);
--- 
-1.6.6.1
-

0030-ziomon-fix-multipathing.patch

@@ -1,46 +0,0 @@
-From 3aa5fa943cea0f01beb63c90a5b0255a797ac117 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Wed, 31 Mar 2010 10:19:50 +0200
-Subject: [PATCH] ziomon - fix multipathing
-
-Description: ziomon: Fix problem with multipath command output
-Symptom:     Number of LUNs does not mach number of devices: E.g. 12 devices
-	and 10 LUNs.
-Problem:     Some version of the multipath command use characters that can
-	break parsing of its output.
-Solution:    Use proper parsing of the multipath -l output.
----
- ziomon/ziomon |   16 ++++++++--------
- 1 files changed, 8 insertions(+), 8 deletions(-)
-
-diff --git a/ziomon/ziomon b/ziomon/ziomon
-index ea910fc..b4c6e36 100755
---- a/ziomon/ziomon
-+++ b/ziomon/ziomon
-@@ -499,15 +499,15 @@ function check_for_multipath_devices() {
-                WRP_DEVICES[$j]="";
-                devices_basenames[$j]="";
-                clean_devices;
--               (( i+=3 ));
-+               (( i+=2 ));
-                while [[ ! "${mp_arr[$i]:0:1}" =~ "[0-9a-zA-Z]" ]] && [ $i -lt ${#mp_arr[@]} ]; do
--                  checked_devs[${#checked_devs[@]}]=`echo ${mp_arr[$i]} | awk '{print "/dev/"$3}'`;
--                  ddebug "   add ${checked_devs[${#checked_devs[@]}-1]}";
--                  line=${mp_arr[$i]#* };
--                  line=${line%%:*};
--                  line=`echo $line | sed 's/ //g'`;
--                  WRP_HOST_ADAPTERS[${#WRP_HOST_ADAPTERS[@]}]="host$line";
--                  WRP_LUNS[${#WRP_LUNS[@]}]=`echo ${mp_arr[$i]#* } | awk '{print $1}'`;
-+                  if [ `echo ${mp_arr[$i]} | grep -e "[0-9]\{1,\}:[0-9]\{1,\}:[0-9]\{1,\}:[0-9]\{1,\}" | wc -l` -ne 0 ]; then
-+                     line="`echo ${mp_arr[$i]} | sed 's/.*\([0-9]\{1,\}:[0-9]\{1,\}:[0-9]\{1,\}:[0-9]\{1,\}\)/\1/'`";
-+                     checked_devs[${#checked_devs[@]}]=`echo $line | awk '{print "/dev/"$2}'`;
-+                     ddebug "   add ${checked_devs[${#checked_devs[@]}-1]}";
-+                     WRP_HOST_ADAPTERS[${#WRP_HOST_ADAPTERS[@]}]="host${line%%:*}";
-+                     WRP_LUNS[${#WRP_LUNS[@]}]=`echo $line | awk '{print $1}'`;
-+                  fi
-                   (( i++ ));
-                done;
-                (( --i ));
--- 
-1.6.6.1
-

0031-mismatch-between-man-and-h-in-chshut.patch

@@ -1,66 +0,0 @@
-From 37e697ae95b3c03f962ac7bb2dd591f00b6de87b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Wed, 28 Apr 2010 10:24:41 +0200
-Subject: [PATCH] mismatch between man and -h in chshut
-
-Description: chshut: Mismatch between man and -h
-Symptom:     Option -h stills show "panic" as a valid state.
-Problem:     Although it should not be used it is possible to use the
-	command with a "panic" state.
-Solution:    Remove "panic" from the list of valid states.
-	Provide an explanatory message in case it is used anyhow.
----
- ipl_tools/getopt.c |   11 -----------
- ipl_tools/sa.c     |    7 +++++--
- 2 files changed, 5 insertions(+), 13 deletions(-)
-
-diff --git a/ipl_tools/getopt.c b/ipl_tools/getopt.c
-index abd0cc2..d729379 100644
---- a/ipl_tools/getopt.c
-+++ b/ipl_tools/getopt.c
-@@ -60,7 +60,6 @@ const char *const usage_sa =
- "  halt      System has been shut down (e.g. shutdown -h -H now)\n"
- "  poff      System has been shut down for power off (e.g. shutdown -h -P now)\n"
- "  reboot    System has been shut down for reboot (e.g. shutdown -r)\n"
--"  panic     System has been shut down after a kernel panic\n"
- "  Note: Depending on the distribution, \"halt\" might be mapped to \"poff\".\n"
- "\n"
- "ACTION specifies the action to be performed:\n"
-@@ -638,16 +637,6 @@ void parse_shutdown_options(int argc, char **argv)
- 					"/sys/firmware/vmcmd/on_reboot");
- 			}
- 			break;
--		case 3:
--			rc = strwrt(argv[2],
--				"/sys/firmware/shutdown_actions/on_panic");
--			if (action == 4 && rc == 0) {
--				/*rc = ustrwrt(argv[3],
--					"/sys/firmware/vmcmd/on_reboot"); */
--				rc = ustrwrt(argv[3],
--					"/sys/firmware/vmcmd/on_panic");
--			}
--			break;
- 		}
- 		if (rc != 0) {
- 			fprintf(stderr, "%s: Failed to change shutdown"
-diff --git a/ipl_tools/sa.c b/ipl_tools/sa.c
-index 0232a47..d6b72bb 100644
---- a/ipl_tools/sa.c
-+++ b/ipl_tools/sa.c
-@@ -83,8 +83,11 @@ int is_valid_case(char *action)
- 		rc = 1;
- 	if (strncmp(action, "reboot", 6) >= 0 && length == 6)
- 		rc = 2;
--	if (strncmp(action, "panic", 5) >= 0 && length == 5)
--		rc = 3;
-+	if (strncmp(action, "panic", 5) >= 0 && length == 5) {
-+		fprintf(stderr,	"%s: Please use \"service dumpconf\" for "
-+			"configuring the panic action\n", name);
-+		exit(1);
-+	}
- 	return rc;
- }
- 
--- 
-1.6.6.1
-

0032-lsdasd-update-man-page.patch

@@ -1,48 +0,0 @@
-From c3fc4200d7913b50fb8b501681a0f44e51833a81 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Wed, 28 Apr 2010 20:57:17 +0200
-Subject: [PATCH] lsdasd - update man page
-
-Description: lsdasd: add missing description of option -b to man page
-Symptom:     Option -b/--base is described in lsdasd --help, but not in
-	the respective man page.
-Problem:     Man page is missing the description.
-Solution:    Add description.
----
- zconf/lsdasd.8 |    6 +++++-
- 1 files changed, 5 insertions(+), 1 deletions(-)
-
-diff --git a/zconf/lsdasd.8 b/zconf/lsdasd.8
-index f37c957..9c13644 100644
---- a/zconf/lsdasd.8
-+++ b/zconf/lsdasd.8
-@@ -10,6 +10,7 @@ lsdasd \- list channel attached direct access storage devices (DASD).
- .TP 8
- .B lsdasd
- .RB [ -a ]
-+.RB [ -b ]
- .RB [ -s ]
- .RB [ -v ]
- .RB [ -l ]
-@@ -19,7 +20,7 @@ lsdasd \- list channel attached direct access storage devices (DASD).
- .RI [ <bus-ID> " [" <bus-ID> "] ...]]"
- 
- .SH DESCRIPTION
--The lsdasd command provides an overview of available DASD devices. 
-+The lsdasd command provides an overview of available DASD devices.
- 
- .SH OPTIONS
- .TP 8
-@@ -32,6 +33,9 @@ Supresses leading "0.0." for bus IDs.
- .BR -a | --offline
- Include all (offline) devices.
- .TP
-+.BR -b | --base
-+Include only base devices.
-+.TP
- .BR -c | --compat
- Old output of lsdasd for compatibility.
- .TP
--- 
-1.6.6.1
-

0033-reinitialize-array-in-lsqeth.patch

@@ -1,79 +0,0 @@
-From edd35870b833548853b4c739cee1a7c0bce1fa55 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Mon, 3 May 2010 10:14:08 +0200
-Subject: [PATCH] reinitialize array in lsqeth
-
-Description: lsqeth: add clearing of print array for every qeth device
-Symptom:     lsqeth without parameters displays information of all qeth
-             devices. For layer2 devices information from a previously
-             displayed layer3 device may show up.
-Problem:     A structure used for printing is not cleared after
-             information for the previous device is written.
-Solution:    Add clearing of print array before collecting display
-             information for a single qeth device..
----
- README       |    3 +++
- zconf/lsqeth |   18 ++++++++++++++++--
- 2 files changed, 19 insertions(+), 2 deletions(-)
-
-diff --git a/README b/README
-index 7c75563..ffd5e54 100644
---- a/README
-+++ b/README
-@@ -253,6 +253,9 @@ Release History:
-          Fix printing of vmcmd shutdown action: Also print CP commands that
-          have more than one word.
- 
-+    - lsqeth:
-+         * clear print array for every device displayed
-+
-     - all:
-          Fixed a lot of build warnings and minor bugs.
- 
-diff --git a/zconf/lsqeth b/zconf/lsqeth
-index b1c2809..19d49cd 100755
---- a/zconf/lsqeth
-+++ b/zconf/lsqeth
-@@ -168,6 +168,19 @@ fi
- }
- 
- 
-+#
-+# initialize format_array_print
-+#
-+function __init_format_array_print
-+{
-+	local k=0
-+
-+	while [ $k -lt ${#output_array[@]} ];
-+	do
-+		format_array_print[$k]=''
-+		k=$((k+1))
-+	done
-+}
- 
- #
- # search value in format_array
-@@ -309,9 +322,9 @@ function __print_normal_format
- #
- function __layer2_print
- {
--	del_layer2=( route4 route6
-+	del_layer2=( route4 route6 large_send
- 		     fake_ll fake_broadcast
--		     sniffer )
-+		     checksumming sniffer )
- 
- 	for l in ${del_layer2[@]}
-  		do
-@@ -358,6 +371,7 @@ fi
- #
- for k in ${device_list}
- 	do
-+	__init_format_array_print
- 	if_name="`cat $device_dir/$k/if_name`"
- 	if [ -z "$if_name" ]; then
- 		if_name=0
--- 
-1.6.6.1
-

0034-check-the-length-of-the-parameters-line.patch

@@ -1,50 +0,0 @@
-From 78a9e00a3a9885298f09079c026bf5415c137cca Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Thu, 20 May 2010 16:19:17 +0200
-Subject: [PATCH] check the length of the parameters line
-
-The value of the parameters variable in zipl.conf that is passed as to the kernel
-into /proc/cmdline is silently truncated to 896 bytes (it matches the value of
-BOOT_PARM_LENGTH from boot/menu.S). Thus we add a check into zipl and end with
-an error if the line is longer.
----
- zipl/include/zipl.h |    3 +++
- zipl/src/job.c      |    8 ++++++++
- 2 files changed, 11 insertions(+), 0 deletions(-)
-
-diff --git a/zipl/include/zipl.h b/zipl/include/zipl.h
-index d2d26dd..5e02f13 100644
---- a/zipl/include/zipl.h
-+++ b/zipl/include/zipl.h
-@@ -40,6 +40,9 @@
- 
- #define MAX_DUMP_VOLUMES		32
- 
-+/* defined in boot/menu.S as MENU_PARM_LENGTH */
-+#define PARMLINE_LENGTH			896
-+
- /* Internal component load address type */
- typedef uint64_t address_t;
- 
-diff --git a/zipl/src/job.c b/zipl/src/job.c
-index a65e8c1..76ed5df 100644
---- a/zipl/src/job.c
-+++ b/zipl/src/job.c
-@@ -894,6 +894,14 @@ get_parmline(char* filename, char* line, char** parmline, address_t* address,
- 			return -1;
- 
- 	} else result = NULL;
-+	/* check the maximum possible length */
-+	if (result) {
-+		len = strlen(result);
-+		if (len > PARMLINE_LENGTH) {
-+			error_text("The length of parameters line (%d bytes) exceeds the allowed maximum (%d bytes)", len, PARMLINE_LENGTH);
-+			return -1;
-+		}
-+	}
- 	*parmline = result;
- 	*address = addr;
- 	return 0;
--- 
-1.6.6.1
-

0035-ziorep-follow-symlink.patch

@@ -1,28 +0,0 @@
-From fabce87ca9d586e6da7ed0bd371f2102408c721c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 4 Jun 2010 12:05:19 +0200
-Subject: [PATCH 35/36] ziorep - follow symlink
-
-Description: ziomon: fix the execution of stat <file>  to follow symlinks.
-Symptom:     The device mapper report is failing with a script error.
-Solution:    Add parameter to stat <file> execution to follow symlinks.
----
- ziomon/ziorep_config |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/ziomon/ziorep_config b/ziomon/ziorep_config
-index de60379..f2ad35c 100755
---- a/ziomon/ziorep_config
-+++ b/ziomon/ziorep_config
-@@ -159,7 +159,7 @@ sub get_mapper_devices
- 			next;
- 		}
- 		my $tf = catfile($c_src, "$dev");
--		my $mm = `stat -c%t:%T $tf`;
-+		my $mm = `stat -L -c%t:%T $tf`;
- 		chomp($mm);
- 		$mm = join(":", map { hex($_) } split(":", $mm));
- 		$mapper_dev{$mm} = $dev;
--- 
-1.6.6.1
-

0036-ts-shell-do-not-restrict-group-names-to-be-alphanume.patch

@@ -1,36 +0,0 @@
-From 379f76e4084a0d1875e1f98b2d975600639f6574 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 4 Jun 2010 12:06:38 +0200
-Subject: [PATCH 36/36] ts-shell: do not restrict group names to be alphanumeric
-
-Description: ts-shell: do not restrict group names to be alphanumeric
-Symptom:     ts-shell does not add authorizations assigned to groups
-		which contain non-alphanumeric characters, for instance,
-		a hyphen (-) sign.
-Problem:     ts-shell uses a regular expression to parse group names.
-		This regular expression uses the alphanumeric character
-		class (\w) to match group names.  Using group names like
-		"ts-user" are ignored, because hyphen signs are not
-		included in the alphanumeric character class.
-Solution:    Make the regular expression less restrictive through
-		permitting all characters that are not whitespaces (\S).
----
- iucvterm/bin/ts-shell.in |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/iucvterm/bin/ts-shell.in b/iucvterm/bin/ts-shell.in
-index 654d0c6..5fdf66c 100755
---- a/iucvterm/bin/ts-shell.in
-+++ b/iucvterm/bin/ts-shell.in
-@@ -219,7 +219,7 @@ sub loadAuthorization(\%)
- 			$authorized = 1;
- 			log_debug "Found user: $key";
- 
--		} elsif ($key =~ /^@(\w+)$/) {
-+		} elsif ($key =~ /^@(\S+)$/) {
- 			my $group = $1;
- 			$authorized = 1 if grep {/^${group}$/} @{$cfg->{groups}};
- 			log_debug "Found group: $key" if $authorized;
--- 
-1.6.6.1
-

0037-znetconf-unknown-driver-for-qeth.patch

@@ -1,30 +0,0 @@
-From 41d606899d4029f8ac9f3415ebd21142cb223d70 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 22 Jun 2010 13:25:32 +0200
-Subject: [PATCH 37/40] znetconf: unknown driver for qeth
-
-Description: znetconf: --drive|-d option returning "unknown driver" for qeth
-Symptom:     qeth classified as unknown if specified for -d
-Problem:     bash reg. expression interpretation changed in new bash versions
-Solution:    used backward and "forward" compatible expression
----
- zconf/znetconf |    3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
-diff --git a/zconf/znetconf b/zconf/znetconf
-index 873124a..e1b48b3 100755
---- a/zconf/znetconf
-+++ b/zconf/znetconf
-@@ -1031,7 +1031,8 @@ function is_shortccwdevbusid_list()
- function is_supported_driver()
- {
- 	local DRIVER="$1"
--	[[ "$DRIVER" =~ "^(qeth|lcs|ctc|ctcm)$" ]]
-+	local DRVEXPR='^(qeth|lcs|ctc|ctcm)$'
-+	[[ "$DRIVER" =~ $DRVEXPR ]]
- 	case $? in
- 		0)
- 			return 0
--- 
-1.6.6.1
-

0038-cpuplugd-fix-stack-overflow.patch

@@ -1,90 +0,0 @@
-From b0192c18160e5ea35889794895becab99890bca3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 22 Jun 2010 13:27:27 +0200
-Subject: [PATCH 38/40] cpuplugd: fix stack overflow
-
-Description: cpuplugd: fix stack overwrite
-Symptom:     cpuplugd will terminate with "stack smashing" error on systems
-	with more than 30 CPUs.
-Problem:     NULL termination of a read buffer will write beyond the buffer
-	if a previous read() filled out the whole buffer.
-Solution:    Only read max. buffer size - 1 bytes.
----
- cpuplugd/daemon.c |    2 +-
- cpuplugd/main.c   |    1 +
- cpuplugd/mem.c    |    4 ++--
- cpuplugd/vmstat.c |    4 ++--
- 4 files changed, 6 insertions(+), 5 deletions(-)
-
-diff --git a/cpuplugd/daemon.c b/cpuplugd/daemon.c
-index f1af263..391acba 100644
---- a/cpuplugd/daemon.c
-+++ b/cpuplugd/daemon.c
-@@ -287,7 +287,7 @@ int check_lpar()
- 				, strerror(errno));
- 		clean_up();
- 	}
--	bytes_read = fread(buffer, 1, sizeof(buffer), filp);
-+	bytes_read = fread(buffer, 1, sizeof(buffer) - 1, filp);
- 	if (bytes_read == 0) {
- 		fprintf(stderr, "Reading /proc/cpuinfo failed:");
- 		fprintf(stderr, "%s\n", strerror(errno));
-diff --git a/cpuplugd/main.c b/cpuplugd/main.c
-index c280342..f8f9dfa 100644
---- a/cpuplugd/main.c
-+++ b/cpuplugd/main.c
-@@ -347,6 +347,7 @@ int main(int argc, char *argv[])
- 			syslog(LOG_INFO, "Out of memory: Aborting.\n");
- 		clean_up();
- 	}
-+	memset(vs, 0, sizeof(struct vmstat));
- 	/*
- 	* If the thread routine requires multiple arguments, they must be
- 	* passed bundled up in an array or a structure
-diff --git a/cpuplugd/mem.c b/cpuplugd/mem.c
-index 8d5f05f..13f902d 100644
---- a/cpuplugd/mem.c
-+++ b/cpuplugd/mem.c
-@@ -70,7 +70,7 @@ int get_vmstats(struct vm_info *v)
- 		rc = -1;
- 		goto out;
- 	}
--	bytes_read = fread(buffer, 1, sizeof(buffer), filp);
-+	bytes_read = fread(buffer, 1, sizeof(buffer) - 1, filp);
- 	/*
- 	 * Bail if read failed or the buffer isn't big enough
- 	 */
-@@ -314,7 +314,7 @@ int get_free_memsize()
- 			       ":%s\n", strerror(errno));
- 		clean_up();
- 	}
--	bytes_read = fread(buffer, 1, sizeof(buffer), filp);
-+	bytes_read = fread(buffer, 1, sizeof(buffer) - 1, filp);
- 	/*
- 	 * Bail if read failed or the buffer isn't big enough
- 	 */
-diff --git a/cpuplugd/vmstat.c b/cpuplugd/vmstat.c
-index 8428cce..d5a0036 100644
---- a/cpuplugd/vmstat.c
-+++ b/cpuplugd/vmstat.c
-@@ -76,7 +76,7 @@ void get_cpu_stats(struct cpustat *s)
- 			syslog(LOG_ERR, "Can not open /proc/stat"
- 			       ":%s\n", strerror(errno));
- 	} else {
--		bytes_read = fread(buffer, 1, sizeof(buffer), filp);
-+		bytes_read = fread(buffer, 1, sizeof(buffer) - 1, filp);
- 		fclose(filp);
- 		/*
- 		 * Bail if read failed or the buffer isn't big enough
-@@ -118,7 +118,7 @@ void get_cpu_stats(struct cpustat *s)
- 			 * softirq: servicing softirqs
- 			 * steal: the cpu time spent in involuntary wait
- 			 */
--			sscanf(match, "cpu  %du %du %du %du %du %du %du %du",
-+			sscanf(match, "cpu  %d %d %d %d %d %d %d %d",
- 					&s->cpu_user,
- 					&s->cpu_nice,
- 					&s->cpu_sys,
--- 
-1.6.6.1
-

0039-cpuplugd-fix-cmm-limits-checks.patch

@@ -1,106 +0,0 @@
-From 664177c0fe57f671ad0d1eeed18374d77233d4b4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 22 Jun 2010 13:28:45 +0200
-Subject: [PATCH 39/40] cpuplugd: fix cmm limits checks
-
-Description: cpuplugd: fix cmm_min/max limit checks.
-Symptom:     The cmm_min and cmm_max limits are not enforced correctly
-		when starting the daemon without the -V option, or when
-		cmm_pages is set manually below or above the limits.
-Problem:     Part of the cmm_min/max checks is only done when -V option
-		is specified. Values above/below the max/min limits are also
-		not identified correctly.
-Solution:    Make checks independent from -V option and check for cmm_pages
-		values beyond the limit.
----
- cpuplugd/main.c |   54 +++++++++++++++---------------------------------------
- 1 files changed, 15 insertions(+), 39 deletions(-)
-
-diff --git a/cpuplugd/main.c b/cpuplugd/main.c
-index f8f9dfa..3738a5f 100644
---- a/cpuplugd/main.c
-+++ b/cpuplugd/main.c
-@@ -226,26 +226,6 @@ void eval_mem_rules(struct config *cfg)
- 	}
- 	/* Evaluate the memunplug rule. */
- 	if (cfg->memunplug && eval_term(cfg->memunplug, &symbols)) {
--		/*
--		 * case where cmm has asynchronously increased
--		 * cmm_pages after cpuplugd reset it to cmm_max
--		 * at cpuplugd startup.
--		 *
--		 */
--		if (cmmpages_size > cfg->cmm_max) {
--			if (debug) {
--				if (foreground == 1)
--					printf("Found cmm_pages above Limit. "
--					       "Resetting value to %d\n"
--					       , cfg->cmm_max);
--				if (foreground == 0)
--					syslog(LOG_INFO, "Found cmm_pages above"
--						"Limit. Resetting value to %d\n"
--					       , cfg->cmm_max);
--			}
--			set_cmm_pages(cfg->cmm_max);
--			return;
--		}
- 		/* check memory limit */
- 		if (cmmpages_size + cfg->cmm_inc > cfg->cmm_max) {
- 			if (debug) {
-@@ -256,18 +236,16 @@ void eval_mem_rules(struct config *cfg)
- 					syslog(LOG_INFO, "maximum memory"
- 					       " limit is reached\n");
- 			}
--			if (cmmpages_size < cfg->cmm_max) {
--				/* if the next increment would exceed
--				 * the maximum we advance to the
--				 * maximum
--				 */
-+			/* if the next increment would exceed
-+			 * the maximum we advance to the
-+			 * maximum
-+			 */
-+			if (cmmpages_size != cfg->cmm_max)
- 				set_cmm_pages(cfg->cmm_max);
--				return;
--			}
--		} else {
--			 memunplug(cfg->cmm_inc);
- 			return;
- 		}
-+		memunplug(cfg->cmm_inc);
-+		return;
- 	}
- 	/* Evaluate the memplug rule. */
- 	if (cfg->memplug && eval_term(cfg->memplug, &symbols)) {
-@@ -280,19 +258,17 @@ void eval_mem_rules(struct config *cfg)
- 				if (foreground == 0)
- 					syslog(LOG_INFO, "minimum memory"
- 					       " limit is reached\n");
--				if (cmmpages_size > cfg->cmm_min) {
--					/* if the next increment would exceed
--					 * the minimum we advance to the
--					 * minimum
--					 */
--					set_cmm_pages(cfg->cmm_min);
--					return;
--				}
- 			}
--		} else {
--			memplug(cfg->cmm_inc);
-+			/* if the next increment would exceed
-+			 * the minimum we advance to the
-+			 * minimum
-+			 */
-+			if (cmmpages_size != cfg->cmm_min)
-+				set_cmm_pages(cfg->cmm_min);
- 			return;
- 		}
-+		memplug(cfg->cmm_inc);
-+		return;
- 	}
- }
- 
--- 
-1.6.6.1
-

0040-cpuplugd-set-cpu_min-to-1-by-default.patch

@@ -1,39 +0,0 @@
-From 4a2b6aa7b2a873be78c27d2abe010cd7e73d9640 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 22 Jun 2010 13:33:36 +0200
-Subject: [PATCH 40/40] cpuplugd: set cpu_min to 1 by default
-
-Description: cpuplugd: set cpu_min to 1 by default.
-Symptom:     With a cpu_min default value of 2, the "cpu ping pong" effect
-		may still be visible with low system load, i.e. expensive cpu
-		signaling may occur if the workload is spread on 2 under-worked
-		cpus.
-Problem:     The default value for cpu_min is 2.
-Solution:    Set the default value of cpu_min to 1.
----
- etc/sysconfig/cpuplugd |    6 ++----
- 1 files changed, 2 insertions(+), 4 deletions(-)
-
-diff --git a/etc/sysconfig/cpuplugd b/etc/sysconfig/cpuplugd
-index c807232..efafa20 100644
---- a/etc/sysconfig/cpuplugd
-+++ b/etc/sysconfig/cpuplugd
-@@ -6,13 +6,11 @@
- # It does not contain shell environment variables.
- 
- ## Type:	integer
--## Default:	2
-+## Default:	1
- #
- # The minimum number of cpus. 
--# This means in this example, that every time at least two cpus 
--# will be available
- #
--CPU_MIN="2"
-+CPU_MIN="1"
- 
- ## Type:	integer
- ## Default:	2
--- 
-1.6.6.1
-

0041-fix-dates-option-on-zfcpdbf.patch

@@ -1,40 +0,0 @@
-From e30dc240e7417b83957507f1da6b34c31f18afb5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 29 Jun 2010 22:23:50 +0200
-Subject: [PATCH] fix --dates option on zfcpdbf
-
-Description: zfcpdbf: Fix --dates option
-Symptom:     Running zfcpdbf with the option --dates returns "Unknown
-             option: dates".
-Problem:     The code expects --date, not the documented --dates option.
-Solution:    Change zfcpdbf to expect --dates, as documented in the
-             man page and in the usage information.
----
- scripts/zfcpdbf |    4 ++--
- 1 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/scripts/zfcpdbf b/scripts/zfcpdbf
-index 3693d71..0b75c43 100755
---- a/scripts/zfcpdbf
-+++ b/scripts/zfcpdbf
-@@ -139,7 +139,7 @@ GetOptions(
- 	'V|verbose'	=> \$OPT_VERBOSE,
- 	'h|help'	=> \$OPT_HELP,
- 	'v|version'	=> \$OPT_VERSION,
--	'D|date=s'	=> \$OPT_DATE,
-+	'D|dates=s'	=> \$OPT_DATE,
- 	's|singleline'	=> \$OPT_SINGLELINE
- ) or print_usage();
- 
-@@ -555,7 +555,7 @@ sub print_san {
- 
- #
- # Converts the Unix time to localtime an returns it 
--# depending on the --date option.
-+# depending on the --dates option.
- #
- # \param	UNIX Timestamp to convert
- # \return 	Formated Localtime
--- 
-1.6.6.1
-

0042-lsluns-uninitialized-value-on-adapter-offline.patch

@@ -1,36 +0,0 @@
-From 76e25ac419c3f23c0cdbfcd2db64bf196d806994 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 13 Jul 2010 15:27:26 +0200
-Subject: [PATCH 42/43] lsluns: uninitialized value on adapter offline
-
-Description: lsluns: uninitialized value on adapter offline.
-Symptom:     An error message is presented stating that some values
-		are not initialized while an operation is due.
-Problem:     The program execution is not reflection the offline adapter
-		status.
-Solution:    Account for offlined adapter status and show an appropriate
-		message.
----
- zconf/lsluns |    6 +++++-
- 1 files changed, 5 insertions(+), 1 deletions(-)
-
-diff --git a/zconf/lsluns b/zconf/lsluns
-index 9227f64..769b846 100755
---- a/zconf/lsluns
-+++ b/zconf/lsluns
-@@ -211,7 +211,11 @@ sub show_attached_lun_info
-                         print "\tport = $p\n";
-                         foreach my $l (sort keys %{$lun_hash{$a}{$p}}) {
-                                 my $sg_dev = "/dev/".$lun_hash{$a}{$p}{$l};
--                                my $inq = `sg_inq -r $sg_dev`;
-+                                my $inq = `sg_inq -r $sg_dev 2>/dev/null`;
-+				if (!$inq) {
-+					print("\t\tlun = $l [offline]\n");
-+					next;
-+				}
-                                 (my $vend = substr($inq, 0x8, 0x8)) =~ s/\s*//g;
-                                 (my $mod = substr($inq, 0x10, 0x10)) =~ s/\s*//g;
-                                 my $type = ord(substr($inq, 0x0, 0x1));
--- 
-1.7.1.1
-

0043-zfcpdbf-Fix-Use-of-uninitialized-value-and-output-is.patch

@@ -1,78 +0,0 @@
-From e1f4564972a7d280badf24568d56c063b6ce0ca7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 13 Jul 2010 15:29:42 +0200
-Subject: [PATCH 43/43] zfcpdbf: Fix "Use of uninitialized value" and output issues
-
-Description: zfcpdbf: Fix "Use of uninitialized value" and output issues
-Symptom:     zfcpdbf outputs the error "Use of uninitialized value".
-Problem:     zfcpdbf tried to output attributes for "status read"
-		commands that do not exist. It also tried to output the
-		attribute port_handle for ELS requests that does not exist.
-Solution:    Exit early for "status read" requests, there is no additional
-		FSF command data. Remove output of LS field for ELS requests.
-		It was wrong, and newer dbf does not have this redundant field.
-		For consistency, add devno and timestamp to output of "status
-		read".
----
- scripts/zfcpdbf |   20 +++++++++++++-------
- 1 files changed, 13 insertions(+), 7 deletions(-)
-
-diff --git a/scripts/zfcpdbf b/scripts/zfcpdbf
-index 0b75c43..f82044d 100755
---- a/scripts/zfcpdbf
-+++ b/scripts/zfcpdbf
-@@ -375,11 +375,13 @@ sub print_hba {
- 			}
- 			elsif(defined($hba_hash{'tag2'}) && 
- 				$hba_hash{'tag2'} eq "dism") {
--				print "status read request dissmissed";
-+				print "$adapter $hba_hash{'timestamp'} " .
-+				      "status read request dismissed";
- 			}
- 			elsif(defined($hba_hash{'tag2'}) && 
- 				$hba_hash{'tag2'} eq "fail") {
--				print "status read request failed";
-+				print "$adapter $hba_hash{'timestamp'} " .
-+				      "status read request failed";
- 			}
- 		}		
- 		elsif(defined($hba_hash{'tag'}) && $hba_hash{'tag'} eq "resp") {
-@@ -398,9 +400,14 @@ sub print_hba {
- 			}  
- 		}	
- 		else {
--			next;
-+			return;
- 		}
--		
-+
-+		if ($hba_hash{'tag'} eq 'stat') {
-+			print "\n";
-+			return;
-+		}
-+
- 		if($OPT_VERBOSE) {
- 			print "protocol status qualifier=" .
- 				"'$hba_hash{'fsf_prot_status_qual'}'" . $endl .
-@@ -410,7 +417,7 @@ sub print_hba {
- 				"'$hba_hash{'fsf_req_status'}'" . $endl .
- 				"SBAL=$hba_hash{'sbal_first'}/$hba_hash{
- 				'sbal_last'}/$hba_hash{'sbal_response'} " .
--				"(fist/last/response)" . $endl; 
-+				"(first/last/response)" . $endl;
- 		}
- 
- 		if($hba_hash{'fsf_command'} eq '0x00000002') {
-@@ -432,8 +439,7 @@ sub print_hba {
- 				" LUN handle=$hba_hash{'lun_handle'}"; 
- 		}
- 		elsif($hba_hash{'fsf_command'} eq '0x0000000b' ) {
--			print "D_ID=$hba_hash{'d_id'} LS " .
--				"code=$hba_hash{'port_handle'}";
-+			print "D_ID=$hba_hash{'d_id'}";
- 		}
- 		print"\n";
- 	}
--- 
-1.7.1.1
-

0044-xcec-bridge-fix-multicast-forwarding.patch

@@ -1,41 +0,0 @@
-From 30321208dbccbd634c5e91b594372d150df07a03 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 25 Jan 2011 10:38:42 +0100
-Subject: [PATCH 44/46] xcec-bridge: fix multicast forwarding
-
-Description: xcec-bridge: fix multicast forwarding
-Symptom:     Forwarding of multicast traffic does not work.
-Problem:     xcec-bridge was developed for the broken packet socket
-		support of the qeth layer 3 driver. The code assumes
-		there are no link level heades for incoming packets.
-Solution:    New qeth layer 3 driver has full packet socket support
-		so xcec-bridge has to account link level header.
----
- ip_watcher/xcec-bridge.c |    9 +++++----
- 1 files changed, 5 insertions(+), 4 deletions(-)
-
-diff --git a/ip_watcher/xcec-bridge.c b/ip_watcher/xcec-bridge.c
-index d6dd112..7f551d2 100644
---- a/ip_watcher/xcec-bridge.c
-+++ b/ip_watcher/xcec-bridge.c
-@@ -549,12 +549,13 @@ void process_packet(struct int_sock *i_s)
- 		if (s_ll.sll_pkttype==PACKET_BROADCAST) {
- 			s_in.sin_addr.s_addr=INADDR_BROADCAST;
- 		} else {
--			memcpy(&s_in.sin_addr,&buffer[16],4);
-+			memcpy(&s_in.sin_addr, &buffer[16 + ETH_HLEN], 4);
- 		}
- 
--		retval=sendto(i_s_item->o_fd,buffer,buffer_len,0,
--			      (struct sockaddr *)&s_in,
--			      sizeof(struct sockaddr_in));
-+		retval=sendto(i_s_item->o_fd, buffer + ETH_HLEN,
-+				buffer_len - ETH_HLEN, 0,
-+				(struct sockaddr *)&s_in,
-+				sizeof(struct sockaddr_in));
- 		if (retval==-1) {
- 			if ( (errno==EMSGSIZE) && (!i_s_item->mtu_warning) ) {
- 				syslog(LOG_WARNING,"MTU of %s too small " \
--- 
-1.7.3.4
-

0045-ziomon-wrong-return-codes.patch

@@ -1,53 +0,0 @@
-From 7ff057ee33e5e452c09308249b36fa5da051b238 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 25 Jan 2011 10:57:40 +0100
-Subject: [PATCH 45/46] ziomon: wrong return codes
-
-Description: ziomon: ziomon tools return 1 when using option -h, --help and -v,
-		when return code must be 0. ziomon return 0 when using no command line
-		parameter, return code must be 1 here.
-Symptom:     Confusing error code. Some automated test cases maybe fail.
-Problem:     1 as been introduced as rc for parse_parms besides error codes,
-		but is not distinguished from them when parse_params is called.
-Solution:    In function parse_parms substitute "exit 1" by "exit 0"
-		in case the option -h, --help or -v was handled by the program.
-		Substitute "exit 0" by "exit 1" in case the case with no
-		commandline parametes was handled by the program.
----
- ziomon/ziomon |    6 +++---
- 1 files changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/ziomon/ziomon b/ziomon/ziomon
-index b4c6e36..9af2f4e 100755
---- a/ziomon/ziomon
-+++ b/ziomon/ziomon
-@@ -124,7 +124,7 @@ function parse_params() {
- 
-    if [ $# -eq 0 ]; then
-       print_usage;
--      exit 0;
-+      exit 1;
-    fi
- 
-    let i=0;
-@@ -132,7 +132,7 @@ function parse_params() {
-         case $1 in
-             --help|-h)
-                 print_usage;
--                exit 1;;
-+                exit 0;;
-             --verbose|-V)
-                 (( WRP_DEBUG++ ));;
-             --duration|-d)
-@@ -152,7 +152,7 @@ function parse_params() {
-                 [ $? -ne 0 ] && ((error++));;
-             --version|-v)
-                 print_version;
--                exit 1;;
-+                exit 0;;
-             -*)
-                 echo "$WRP_TOOLNAME: Invalid option -- $1";
-                 echo "Try '$WRP_TOOLNAME --help' for more information.";
--- 
-1.7.3.4
-

0046-qethconf-process-devices-with-non-zero-subchannel.patch

@@ -1,30 +0,0 @@
-From 037964c1dd79a637e66b51544b69243a2f4216ea Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 25 Jan 2011 11:00:09 +0100
-Subject: [PATCH 46/46] qethconf: process devices with non-zero subchannel
-
-Description: qethconf: process devices with subchannel set != 0
-Symptom:     qethconf ipa list does not show devices with subchannel
-		set != 0.
-Problem:     The code matches only for subchannel set 0.
-Solution:    Extend code to match for other subchannel IDs.
----
- qethconf/qethconf |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/qethconf/qethconf b/qethconf/qethconf
-index 10dc902..9d9de1e 100644
---- a/qethconf/qethconf
-+++ b/qethconf/qethconf
-@@ -205,7 +205,7 @@ function __list_entries
-   fi
-   for j in ${cmd_type}
- 	do
--	  device_list="`cat $sys_file/0.0.*/if_name`"
-+	  device_list="`cat $sys_file/*.*.*/if_name`"
- 	  for i in ${device_list} 
- 		  do
- 			__layer2_enabled "$i" "list"
--- 
-1.7.3.4
-

0047-wait-for-completion-of-any-pending-actions-affecting.patch

@@ -1,102 +0,0 @@
-From 68c07ef0b9d9731c040880e0db3570f48a85f9b8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 28 Jan 2011 13:06:00 +0100
-Subject: [PATCH 47/61] wait for completion of any pending actions affecting device
-
-Delay I/O operations until all pending requests against the common I/O layer
-have been completed. The kernel now provides /proc/cio_settle file and a write
-there will be blocked until all requests are completed.
----
- zconf/chccwdev   |    5 +++++
- zconf/chchp      |    5 +++++
- zconf/cio_ignore |    9 +++++++++
- 3 files changed, 19 insertions(+), 0 deletions(-)
-
-diff --git a/zconf/chccwdev b/zconf/chccwdev
-index d2a697b..03985a1 100755
---- a/zconf/chccwdev
-+++ b/zconf/chccwdev
-@@ -28,6 +28,7 @@
- #==============================================================================
- CMD=$(basename $0)
- MAX_RETRIES=5
-+CIO_SETTLE="/proc/cio_settle"
- 
- if [ "$(cat /proc/filesystems|grep sysfs)" = "" ]; then
- 	echo "ERROR: $CMD requires sysfs support!" >&2
-@@ -160,6 +161,10 @@ while [ $# -gt 0 ]; do
- 	shift
- done
- 
-+if [ -w $CIO_SETTLE ] ; then
-+	echo 1 > $CIO_SETTLE
-+fi
-+
- #
- # Parse the BUSIDLIST and expand the ranges and short IDs.
- #
-diff --git a/zconf/chchp b/zconf/chchp
-index 520ce3f..4a62579 100755
---- a/zconf/chchp
-+++ b/zconf/chchp
-@@ -30,6 +30,7 @@ VERSION="%S390_TOOLS_VERSION%"
- TOOLNAME=${0##*/}
- MAX_CHPID_CSS=255
- MAX_CHPID_ID=255
-+CIO_SETTLE="/proc/cio_settle"
- 
- # Print help text
- function print_help()
-@@ -408,3 +409,7 @@ for CHPID in $CHPID_LIST ; do
- 	get_chpid_id TO_ID $CHPID_TO
- 	loop_chpids $FROM_CSS $FROM_ID $TO_CSS $TO_ID perform_command
- done
-+
-+if [ -w $CIO_SETTLE ] ; then
-+	echo 1 > $CIO_SETTLE
-+fi
-diff --git a/zconf/cio_ignore b/zconf/cio_ignore
-index 71dccb1..476c481 100755
---- a/zconf/cio_ignore
-+++ b/zconf/cio_ignore
-@@ -8,6 +8,8 @@
- 
- VERSION="%S390_TOOLS_VERSION%"
- BLACKLIST="/proc/cio_ignore"
-+CIO_SETTLE="/proc/cio_settle"
-+WAIT_FOR_CIO=0
- SYSINFO="/proc/sysinfo"
- CONSDRV="/sys/bus/ccw/drivers/3215"
- MAXCSSID=0
-@@ -706,9 +708,11 @@ while [ $# -gt 0 ] ; do
- 	-r|--remove)
- 		shift
- 		remove_device $1
-+		WAIT_FOR_CIO=1
- 		;;
- 	-R|--remove-all)
- 		remove_all_devices
-+		WAIT_FOR_CIO=1
- 		;;
- 	-l|--list)
- 		list_blacklisted 1
-@@ -724,6 +728,7 @@ while [ $# -gt 0 ] ; do
- 		;;
- 	-p|--purge)
- 		purge
-+		WAIT_FOR_CIO=1
- 		;;
- 	*)
- 		warn "invalid option '$1'"
-@@ -734,4 +739,8 @@ while [ $# -gt 0 ] ; do
- 	shift
- done
- 
-+if [ \( -w $CIO_SETTLE \) -a $WAIT_FOR_CIO = 1 ] ; then
-+	echo 1 > $CIO_SETTLE
-+fi
-+
- exit 0
--- 
-1.7.3.5
-

0048-add-infrastructure-code-for-new-features.patch

@@ -1,169 +0,0 @@
-From 1ce37d173f564b5070d1819d0f5cec4f015bcbdf Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 28 Jan 2011 13:14:48 +0100
-Subject: [PATCH 48/61] add infrastructure code for new features
-
-Summary:     s390-tools: Add infrastructure code for new features
-Description: Add some infrastructure code from s390-tools upstream
-             to be used by new features:
-             * Add linked list implementation
-             * Add typedefs for replacing __uxx and __sxx datatypes
-             * Define S390_TOOLS_LIBDIR and S390_TOOLS_SYSCONFDIR macros
----
- common.mak          |    4 ++
- include/list.h      |  104 +++++++++++++++++++++++++++++++++++++++++++++++++++
- include/zt_common.h |   11 +++++
- 3 files changed, 119 insertions(+), 0 deletions(-)
- create mode 100644 include/list.h
-
-diff --git a/common.mak b/common.mak
-index 0a7916e..625cf6c 100644
---- a/common.mak
-+++ b/common.mak
-@@ -42,8 +42,12 @@ else
- 	WARNFLAGS = -W -Wall
- endif
- CFLAGS		= $(WARNFLAGS) -O3 -DS390_TOOLS_RELEASE=$(S390_TOOLS_RELEASE) \
-+			-DS390_TOOLS_LIBDIR=$(TOOLS_LIBDIR) \
-+			-DS390_TOOLS_SYSCONFDIR=$(SYSCONFDIR) \
- 			$(OPT_FLAGS)
- CXXFLAGS	= $(WARNFLAGS) -O3 -DS390_TOOLS_RELEASE=$(S390_TOOLS_RELEASE) \
-+			-DS390_TOOLS_LIBDIR=$(TOOLS_LIBDIR) \
-+			-DS390_TOOLS_SYSCONFDIR=$(SYSCONFDIR) \
- 			$(OPT_FLAGS)
- export AS LD CC CPP AR NM STRIP OBJCOPY OBJDUMP INSTALL CFLAGS
- 
-diff --git a/include/list.h b/include/list.h
-new file mode 100644
-index 0000000..b7344ed
---- /dev/null
-+++ b/include/list.h
-@@ -0,0 +1,104 @@
-+/*
-+ * Linked list functions
-+ *
-+ * Copyright IBM Corp. 2001, 2010
-+ * Author(s): Carsten Otte (cotte@de.ibm.com)
-+ *            Michael Holzheu <holzheu@linux.vnet.ibm.com>
-+ */
-+
-+#ifndef LIST_H
-+#define LIST_H
-+
-+#include <stddef.h>
-+
-+struct list {
-+	struct list *next, *prev;
-+};
-+
-+#define EMPTY_LIST(list) { &(list), &(list) }
-+
-+/*
-+ * Add entry to begining of list
-+ */
-+static inline void list_add(struct list *entry, struct list *head)
-+{
-+	entry->next = head->next;
-+	entry->next->prev = entry;
-+	head->next = entry;
-+	entry->prev = head;
-+}
-+
-+/*
-+ * Add entry to end of list
-+ */
-+static inline void list_add_end(struct list *entry, struct list *head)
-+{
-+	entry->prev = head->prev;
-+	entry->prev->next = entry;
-+	head->prev = entry;
-+	entry->next = head;
-+}
-+
-+/*
-+ * Remove entry
-+ */
-+static inline void list_del(struct list *entry)
-+{
-+	entry->next->prev = entry->prev;
-+	entry->prev->next = entry->next;
-+	entry->next = entry;
-+	entry->prev = entry;
-+}
-+
-+/*
-+ * Check if list is empty
-+ */
-+static inline int list_is_empty(struct list *head)
-+{
-+	if ((head->next == head) && (head->prev == head))
-+		return 1;
-+	else
-+		return 0;
-+}
-+
-+/*
-+ * Initialize list
-+ */
-+static inline void list_init(struct list *head)
-+{
-+	head->next = head;
-+	head->prev = head;
-+}
-+
-+#define list_entry(ptr, type, member) ({ \
-+	const typeof(((type *) 0)->member) *__member_ptr = (ptr); \
-+	(type *)((char *)__member_ptr - offsetof(type, member) ); })
-+
-+#define list_entry_first(ptr, type, member) \
-+	list_entry((ptr)->next, type, member)
-+
-+#define list_entry_next(ptr, type, member) \
-+	list_entry((ptr)->next, type, member)
-+
-+#define list_entry_prev(ptr, type, member) \
-+	list_entry((ptr)->prev, type, member)
-+
-+/*
-+ * List iterators
-+ */
-+#define list_get(entry, type, member) \
-+	((type *)((char *)(entry)-(unsigned long)(&((type *)0)->member)))
-+
-+#define list_iterate(i, head, member)				\
-+	for (i = list_get((head)->next, typeof(*i), member);	\
-+	     &i->member != (head);				\
-+	     i = list_get(i->member.next, typeof(*i), member))
-+
-+#define list_iterate_safe(i, head, member, n)			\
-+	for (i = list_get((head)->next, typeof(*i), member),	\
-+	     n = list_get(i->member.next, typeof(*i), member);	\
-+	     &i->member != (head);				\
-+	     i = n,						\
-+	     n = list_get(n->member.next, typeof(*n), member))
-+
-+#endif /* LIST_H */
-diff --git a/include/zt_common.h b/include/zt_common.h
-index ba9a850..7950651 100644
---- a/include/zt_common.h
-+++ b/include/zt_common.h
-@@ -21,5 +21,16 @@
- #endif
- 
- #define RELEASE_STRING	STRINGIFY (S390_TOOLS_RELEASE)
-+#define TOOLS_LIBDIR	STRINGIFY (S390_TOOLS_LIBDIR)
-+#define TOOLS_SYSCONFDIR STRINGIFY (S390_TOOLS_SYSCONFDIR)
-+
-+typedef unsigned long long	u64;
-+typedef signed long long	s64;
-+typedef unsigned int		u32;
-+typedef signed int		s32;
-+typedef unsigned short int	u16;
-+typedef signed short int	s16;
-+typedef unsigned char		u8;
-+typedef signed char		s8;
- 
- #endif /* ZT_COMMON_H */
--- 
-1.7.3.5
-

0051-lsmem-chmem-Tools-to-manage-memory-hotplug.patch

@@ -1,729 +0,0 @@
-From 411a47d37b69a0763d1d7b1e3e132cfab67815cd Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 28 Jan 2011 14:15:39 +0100
-Subject: [PATCH 51/61] lsmem/chmem: Tools to manage memory hotplug
-
-Summary:     lsmem/chmem: Tools to manage memory hotplug.
-Description: With lsmem, you can display the online status of all available
-             memory. With chmem, you can set memory online or offline.
----
- README         |    2 +
- zconf/Makefile |   17 +++-
- zconf/chmem    |  325 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- zconf/chmem.8  |   71 ++++++++++++
- zconf/lsmem    |  158 +++++++++++++++++++++++++++
- zconf/lsmem.8  |   69 ++++++++++++
- 6 files changed, 639 insertions(+), 3 deletions(-)
- create mode 100644 zconf/chmem
- create mode 100644 zconf/chmem.8
- create mode 100644 zconf/lsmem
- create mode 100644 zconf/lsmem.8
-
-diff --git a/README b/README
-index 4335b43..dbb1475 100644
---- a/README
-+++ b/README
-@@ -112,6 +112,8 @@ s390-tools (1.8.2)
-                    adapters.
-      - cio_ignore: Query and modify the contents of the CIO device driver
-                    blacklist.
-+     - lsmem:      Display the online status of the available memory.
-+     - chmem:      Set hotplug memory online or offline.
- 
-    * dumpconf:
-      Allows to configure the dump device used for system dump in case a kernel
-diff --git a/zconf/Makefile b/zconf/Makefile
-index 9fe8b42..10f2b87 100644
---- a/zconf/Makefile
-+++ b/zconf/Makefile
-@@ -5,14 +5,16 @@ include ../common.mak
- 
- SCRIPTS	= lsdasd lstape lscss chccwdev lsqeth lszfcp lschp chchp lszcrypt \
- 	  chzcrypt lsluns cio_ignore znetconf
-+USRSBIN_SCRIPTS = lsmem chmem
- MANPAGES= lsdasd.8 lstape.8 lscss.8 chccwdev.8 lsqeth.8 lszfcp.8 lschp.8 \
--	  chchp.8 lszcrypt.8 chzcrypt.8 lsluns.8 cio_ignore.8 znetconf.8
-+	  chchp.8 lszcrypt.8 chzcrypt.8 lsluns.8 cio_ignore.8 znetconf.8 \
-+	  chmem.8 lsmem.8
- 
- all:
- 
- clean:
- 
--install:	install-scripts install-manpages
-+install:	install-scripts install-manpages install-usrsbin-scripts
- 	$(INSTALL) -g $(GROUP) -o $(OWNER) -m 755 lsznet.raw $(TOOLS_LIBDIR)
- 	$(INSTALL) -g $(GROUP) -o $(OWNER) -m 755 znetcontrolunits \
- 		$(TOOLS_LIBDIR)
-@@ -26,6 +28,15 @@ install-scripts:	$(SCRIPTS)
- 		chmod 755 $(BINDIR)/$$i; \
- 	done
- 
-+install-usrsbin-scripts:	$(USRSBIN_SCRIPTS)
-+	@for i in $^; do \
-+		cat $$i | \
-+		sed -e 's+%S390_TOOLS_VERSION%+$(S390_TOOLS_RELEASE)+' \
-+		>$(USRSBINDIR)/$$i; \
-+		chown $(OWNER).$(GROUP) $(USRSBINDIR)/$$i; \
-+		chmod 755 $(USRSBINDIR)/$$i; \
-+	done
-+
- install-manpages:	$(MANPAGES)
- 	@if [ ! -d $(MANDIR) ]; then \
- 		mkdir -p $(MANDIR)/man8; \
-@@ -38,4 +49,4 @@ install-manpages:	$(MANPAGES)
- 		install -o $(OWNER) -g $(GROUP) -m 644 $$i $(MANDIR)/man8; \
- 	done
- 
--.PHONY: all install clean install-scripts install-manpages
-+.PHONY: all install clean install-scripts install-manpages install-usrsbin-scripts
-diff --git a/zconf/chmem b/zconf/chmem
-new file mode 100644
-index 0000000..bdc25a4
---- /dev/null
-+++ b/zconf/chmem
-@@ -0,0 +1,325 @@
-+#!/usr/bin/perl
-+###############################################################################
-+# chmem - script to show memory hotplug status.
-+#
-+# Copyright IBM Corp. 2010
-+# Author(s): Gerald Schaefer <gerald.schaefer@de.ibm.com>
-+###############################################################################
-+
-+use strict;
-+use warnings;
-+use Getopt::Long qw(:config no_ignore_case no_auto_abbrev);
-+use File::Basename;
-+
-+my $script_name = fileparse($0);
-+my $online = 0;
-+my $offline = 0;
-+my $memdir = "/sys/devices/system/memory";
-+my $block_size = 0;
-+my $total_blocks = 0;
-+my $devices = {};
-+my $dev_size;
-+my $blocks_per_dev = 0;
-+my $devs_per_block = 0;
-+my $ret = 0;
-+
-+sub chmem_usage()
-+{
-+	print <<HERE;
-+Usage: $script_name [OPTIONS] SIZE|RANGE
-+
-+The $script_name command sets a particular size or range of memory online
-+or offline.
-+
-+Specify SIZE as <size>[m|M|g|G]. With m or M, <size> specifies the memory
-+size in MB (1024 x 1024 bytes). With g or G, <size> specifies the memory size
-+in GB (1024 x 1024 x 1024 bytes). The default unit is MB.
-+
-+Specify RANGE in the form 0x<start>-0x<end> as shown in the output of the
-+lsmem command. <start> is the hexadecimal address of the first byte and <end>
-+is the hexadecimal address of the last byte in the memory range.
-+
-+SIZE and RANGE must be aligned to the Linux memory block size, as shown in
-+the output of the lsmem command.
-+
-+OPTIONS
-+    -e, --enable
-+        Set the given RANGE or SIZE of memory online.
-+
-+    -d, --disable
-+        Set the given RANGE or SIZE of memory offline.
-+
-+    -h, --help
-+        Print a short help text, then exit.
-+
-+    -v, --version
-+        Print the version number, then exit.
-+HERE
-+}
-+
-+sub chmem_version()
-+{
-+	print "$script_name: version %S390_TOOLS_VERSION%\n";
-+	print "Copyright IBM Corp. 2010\n";
-+}
-+
-+sub chmem_get_dev_size()
-+{
-+	my $i = 0;
-+	my $device = 0;
-+	my $old_device = 0;
-+
-+	while (-d "$memdir/memory$i") {
-+		$device = `cat $memdir/memory$i/phys_device`;
-+		chomp($device);
-+		if ($device > $old_device) {
-+			$dev_size = int($dev_size / ($device - $old_device));
-+			last;
-+		}
-+		$dev_size += $block_size;
-+		$i++;
-+	}
-+}
-+
-+sub chmem_online($)
-+{
-+	my $block = shift;
-+
-+	qx(echo online > $memdir/memory$block/state 2>/dev/null);
-+	return $? >> 8;
-+}
-+
-+sub chmem_offline($)
-+{
-+	my $block = shift;
-+
-+	qx(echo offline > $memdir/memory$block/state 2>/dev/null);
-+	return $? >> 8;;
-+}
-+
-+sub chmem_read_attr($$$)
-+# parameters: state, device, block
-+{
-+	my @attributes = qw(state phys_device);
-+	foreach (0..1) {
-+		$_[$_] = `cat $memdir/memory$_[2]/$attributes[$_]`;
-+		chomp($_[$_]);
-+	}
-+}
-+
-+sub chmem_read_devices()
-+{
-+	my $i = 0;
-+	my $device = 0;
-+	my $old_device = 0;
-+	my $blocks = 0;
-+	my $state;
-+
-+	while (-d "$memdir/memory$i") {
-+		chmem_read_attr($state, $device, $i);
-+		if ($device != $old_device) {
-+			$devices->{$old_device}->{'id'} = $old_device;
-+			$devices->{$old_device}->{'blocks'} = $blocks;
-+			$old_device = $device;
-+			$blocks = 0;
-+		}
-+		if ($state eq "online") {
-+			$blocks++;
-+		}
-+		$i++;
-+	}
-+	$devices->{$old_device}->{'blocks'} = $blocks;
-+	$devices->{$old_device}->{'id'} = $old_device;
-+}
-+
-+sub chmem_dev_action($$)
-+{
-+	my ($dev_id, $blocks) = @_;
-+	my ($start_block, $end_block, $tmp_block, $max_blocks);
-+	my $state;
-+	my $i = 0;
-+	my $count = 0;
-+
-+	if ($blocks_per_dev > 0) {
-+		$start_block = $dev_id * $blocks_per_dev;
-+		$end_block = $start_block + $blocks_per_dev - 1;
-+		$max_blocks = $blocks_per_dev;
-+	} else {
-+		$start_block = int($dev_id / $devs_per_block);
-+		$end_block = $start_block;
-+		$max_blocks = 1;
-+	}
-+	if ($blocks > $max_blocks) {
-+		$blocks = $max_blocks;
-+	}
-+	while ($count < $blocks && $i < $max_blocks) {
-+		$tmp_block = $online ? $start_block + $i : $end_block - $i;
-+		$state = `cat $memdir/memory$tmp_block/state`;
-+		chomp($state);
-+		if ($offline && $state eq "online") {
-+			$count++ unless chmem_offline($tmp_block);
-+		}
-+		if ($online && $state eq "offline") {
-+			$count++ unless chmem_online($tmp_block);
-+		}
-+		$i++;
-+	}
-+	return $count;
-+}
-+
-+sub chmem_size($)
-+{
-+	my $size = shift;
-+	my ($blocks, $dev_blocks, $dev_id);
-+
-+	$blocks = int($size / $block_size);
-+	if ($online) {
-+		foreach my $device (sort {$b->{'blocks'} <=> $a->{'blocks'} ||
-+					  $a->{'id'} <=> $b->{'id'}}
-+				    values %{$devices}) {
-+			$dev_blocks = $device->{'blocks'};
-+			$dev_id = $device->{'id'};
-+			if ($dev_blocks < $blocks_per_dev || $dev_blocks == 0) {
-+				$blocks -= chmem_dev_action($dev_id, $blocks);
-+				if ($blocks == 0) {
-+					last;
-+				}
-+			}
-+		}
-+		if ($blocks > 0) {
-+			printf(STDERR "chmem: Could only set %lu MB of memory ".
-+			       "online.\n", $size - $blocks * $block_size);
-+			$ret = 1;
-+		}
-+	} else {
-+		foreach my $device (sort {$a->{'blocks'} <=> $b->{'blocks'} ||
-+					  $b->{'id'} <=> $a->{'id'}}
-+				    values %{$devices}) {
-+			$dev_blocks = $device->{'blocks'};
-+			$dev_id = $device->{'id'};
-+			if ($dev_blocks > 0) {
-+				$blocks -= chmem_dev_action($dev_id, $blocks);
-+				if ($blocks == 0) {
-+					last;
-+				}
-+			}
-+		}
-+		if ($blocks > 0) {
-+			printf(STDERR "chmem: Could only set %lu MB of memory ".
-+			       "offline.\n", $size - $blocks * $block_size);
-+			$ret = 1;
-+		}
-+	}
-+}
-+
-+sub chmem_range($$)
-+{
-+	my ($start, $end) = @_;
-+	my $block = 0;
-+	my $state;
-+
-+	while ($start < $end && $block < $total_blocks - 1) {
-+		$block = int($start / ($block_size << 20));
-+		$state = `cat $memdir/memory$block/state`;
-+		chomp($state);
-+		if ($online && $state eq "offline") {
-+			if (chmem_online($block)) {
-+				printf(STDERR "chmem: Could not set ".
-+				       "0x%016x-0x%016x online\n", $start,
-+				       $start + ($block_size << 20) - 1);
-+				$ret = 1;
-+			}
-+		}
-+		if ($offline && $state eq "online") {
-+			if (chmem_offline($block)) {
-+				printf(STDERR "chmem: Could not set ".
-+				       "0x%016x-0x%016x offline\n", $start,
-+				       $start + ($block_size << 20) - 1);
-+				$ret = 1;
-+			}
-+		}
-+		$start += $block_size << 20;
-+	}
-+}
-+
-+sub chmem_check()
-+{
-+	unless (-d $memdir) {
-+		die "chmem: No memory hotplug interface in sysfs ($memdir).\n";
-+	}
-+	$block_size = `cat $memdir/block_size_bytes`;
-+	chomp($block_size);
-+	if ($block_size =~ /(?:0x)?([[:xdigit:]]+)/) {
-+		$block_size = unpack("Q", pack("H16",
-+				     substr("0" x 16 . $1, -16)));
-+		$block_size = $block_size >> 20;
-+	} else {
-+		die "chmem: Unknown block size format in sysfs.\n";
-+	}
-+	if ($online == 0 && $offline == 0) {
-+		die "chmem: Please specify one of the options -e or -d.\n";
-+	}
-+	if ($online == 1 && $offline == 1) {
-+		die "chmem: You cannot specify both options -e and -d.\n";
-+	}
-+
-+	while (-d "$memdir/memory$total_blocks") {
-+		$total_blocks++;
-+	}
-+	chmem_get_dev_size();
-+	if ($dev_size >= $block_size) {
-+		$blocks_per_dev = int($dev_size / $block_size);
-+	} else {
-+		$devs_per_block = int($block_size / $dev_size);
-+	}
-+}
-+
-+sub chmem_action()
-+{
-+	my ($start, $end, $size, $unit);
-+
-+	if (!defined($ARGV[0])) {
-+		die "chmem: Missing size or range.\n";
-+	}
-+	if ($ARGV[0] =~ /^0x([[:xdigit:]]+)-0x([[:xdigit:]]+)$/) {
-+		$start = unpack("Q", pack("H16", substr("0" x 16 . $1, -16)));
-+		$end = unpack("Q", pack("H16", substr("0" x 16 . $2, -16)));
-+		if ($start % ($block_size << 20) ||
-+		    ($end + 1) % ($block_size << 20)) {
-+			die "chmem: Start address and (end address + 1) must ".
-+			    "be aligned to memory block size ($block_size MB).\n";
-+		}
-+		chmem_range($start, $end);
-+	} else {
-+		if ($ARGV[0] =~ m/^(\d+)([mg]?)$/i) {
-+			$size = $1;
-+			$unit = $2 || "";
-+			if ($unit =~ /g/i) {
-+				$size = $size << 10;
-+			}
-+			if ($size % $block_size) {
-+				die "chmem: Size must be aligned to memory ".
-+				    "block size ($block_size MB).\n";
-+			}
-+			chmem_size($size);
-+		} else {
-+			printf(STDERR "chmem: Invalid size or range: %s\n",
-+			       $ARGV[0]);
-+			exit 1;
-+		}
-+	}
-+}
-+
-+
-+# Main
-+unless (GetOptions('v|version' => sub {chmem_version(); exit 0;},
-+		  'h|help'    => sub {chmem_usage(); exit 0;},
-+		  'e|enable'  => \$online,
-+		  'd|disable' => \$offline)) {
-+	die "Try '$script_name --help' for more information.\n";
-+};
-+
-+chmem_read_devices();
-+chmem_check();
-+chmem_action();
-+exit $ret;
-diff --git a/zconf/chmem.8 b/zconf/chmem.8
-new file mode 100644
-index 0000000..34bea3c
---- /dev/null
-+++ b/zconf/chmem.8
-@@ -0,0 +1,71 @@
-+.TH CHMEM 8 "Apr 2010" "s390-tools"
-+.
-+.
-+.SH NAME
-+chmem \- set memory online or offline.
-+.
-+.SH SYNOPSIS
-+.B chmem
-+.RB OPTIONS
-+.RB [SIZE|RANGE]
-+.
-+.
-+.SH DESCRIPTION
-+The chmem command sets a particular size or range of memory online or offline.
-+.
-+.IP "\(hy" 2
-+Specify SIZE as <size>[m|M|g|G]. With m or M, <size> specifies the memory
-+size in MB (1024 x 1024 bytes). With g or G, <size> specifies the memory size
-+in GB (1024 x 1024 x 1024 bytes). The default unit is MB.
-+.
-+.IP "\(hy" 2
-+Specify RANGE in the form 0x<start>-0x<end> as shown in the output of the
-+lsmem command. <start> is the hexadecimal address of the first byte and <end>
-+is the hexadecimal address of the last byte in the memory range.
-+.
-+.PP
-+SIZE and RANGE must be aligned to the Linux memory block size, as shown in
-+the output of the lsmem command.
-+
-+Setting memory online can fail if the hypervisor does not have enough memory
-+left, for example because memory was overcommitted. Setting memory offline can
-+fail if Linux cannot free the memory. If only part of the requested memory can
-+be set online or offline, a message tells you how much memory was set online
-+or offline instead of the requested amount.
-+.
-+.
-+.SH OPTIONS
-+.TP
-+.BR \-h ", " \-\-help
-+Print a short help text, then exit.
-+.
-+.TP
-+.BR \-v ", " \-\-version
-+Print the version number, then exit.
-+.
-+.TP
-+.BR \-e ", " \-\-enable
-+Set the given RANGE or SIZE of memory online.
-+.
-+.TP
-+.BR \-d ", " \-\-disable
-+Set the given RANGE or SIZE of memory offline.
-+.
-+.
-+.SH EXAMPLES
-+.TP
-+.B chmem --enable 1024
-+This command requests 1024 MB of memory to be set online.
-+.
-+.TP
-+.B chmem -e 2g
-+This command requests 2 GB of memory to be set online.
-+.
-+.TP
-+.B chmem --disable 0x00000000e4000000-0x00000000f3ffffff
-+This command requests the memory range starting with 0x00000000e4000000
-+and ending with 0x00000000f3ffffff to be set offline.
-+.
-+.
-+.SH SEE ALSO
-+.BR lsmem (8)
-diff --git a/zconf/lsmem b/zconf/lsmem
-new file mode 100644
-index 0000000..e6ed1fa
---- /dev/null
-+++ b/zconf/lsmem
-@@ -0,0 +1,158 @@
-+#!/usr/bin/perl
-+###############################################################################
-+# lsmem - script to show memory hotplug status.
-+#
-+# Copyright IBM Corp. 2010
-+# Author(s): Gerald Schaefer <gerald.schaefer@de.ibm.com>
-+###############################################################################
-+
-+use strict;
-+use warnings;
-+use Getopt::Long qw(:config no_ignore_case no_auto_abbrev);
-+use File::Basename;
-+
-+my $script_name = fileparse($0);
-+my $memdir = "/sys/devices/system/memory";
-+my $block_size = 0;
-+my $list_all = 0;
-+my $dev_size = 0;
-+
-+
-+sub lsmem_read_attr($$$$)
-+# parameters: state, rem, device, block_nr
-+{
-+	my @attributes = qw(state removable phys_device);
-+	foreach (0..2) {
-+		$_[$_] = `cat $memdir/memory$_[3]/$attributes[$_]`;
-+		chomp($_[$_]);
-+	}
-+}
-+
-+sub lsmem_get_dev_size()
-+{
-+	my $i = 0;
-+	my ($device, $old_device) = (0, 0);
-+
-+	while (-d "$memdir/memory$i") {
-+		$device = `cat $memdir/memory$i/phys_device`;
-+		chomp($device);
-+		if ($device > $old_device) {
-+			$dev_size = int($dev_size / ($device - $old_device));
-+			last;
-+		}
-+		$dev_size += $block_size;
-+		$i++;
-+	}
-+}
-+
-+sub lsmem_list()
-+{
-+	my $i = 0;
-+	my ($start, $end, $size) = (0, 0, 0);
-+	my ($state, $old_state) = (0, 0);
-+	my ($rem, $old_rem) = (0, 0);
-+	my ($device, $old_device) = (0, 0);
-+	my ($mem_online, $mem_offline) = (0, 0);
-+	my ($last_block, $end_dev) = (0, 0);
-+
-+	if (-d "$memdir/memory0") {
-+		lsmem_read_attr($old_state, $old_rem, $old_device, 0);
-+	} else {
-+		die "lsmem: No memory hotplug interface in sysfs ($memdir).\n";
-+	}
-+
-+	$block_size = `cat $memdir/block_size_bytes`;
-+	chomp($block_size);
-+	if ($block_size =~ /(?:0x)?([[:xdigit:]]+)/) {
-+		$block_size = unpack("Q", pack("H16",
-+				     substr("0" x 16 . $1, -16)));
-+		$block_size = $block_size >> 20;
-+	} else {
-+		die "lsmem: Unknown block size format in sysfs.\n";
-+	}
-+	lsmem_get_dev_size();
-+
-+	print <<HERE;
-+Address Range                          Size (MB)  State    Removable  Device
-+===============================================================================
-+HERE
-+	while (-d "$memdir/memory$i") {
-+		$i++;
-+		if (-d "$memdir/memory$i") {
-+			lsmem_read_attr($state, $rem, $device, $i);
-+		} else {
-+			$last_block = 1;
-+		}
-+		if ($state ne $old_state || $rem != $old_rem || $list_all ||
-+		    $last_block) {
-+			$end = $i * ($block_size << 20) - 1;
-+			$size = ($end - $start + 1) >> 20;
-+			if ($old_state eq "going-offline") {
-+				$old_state = "on->off";
-+			}
-+			printf("0x%016x-0x%016x %10lu  %-7s ", $start, $end,
-+				$size, $old_state);
-+			if ($old_state eq "online") {
-+				printf(" %-9s  ", $old_rem ? "yes" : "no");
-+				$mem_online += $size;
-+			} else {
-+				printf(" %-9s  ", "-");
-+				$mem_offline += $size;
-+			}
-+			$end_dev = ($end / $dev_size) >> 20;
-+			if ($old_device == $end_dev) {
-+				printf("%d\n", $old_device);
-+			} else {
-+				printf("%d-%d\n", $old_device, $end_dev);
-+			}
-+			$old_state = $state;
-+			$old_rem = $rem;
-+			$old_device = $device;
-+			$start = $end + 1;
-+		}
-+	}
-+	printf("\n");
-+	printf("Memory device size  : %lu MB\n", $dev_size);
-+	printf("Memory block size   : %lu MB\n", $block_size);
-+	printf("Total online memory : %lu MB\n", $mem_online);
-+	printf("Total offline memory: %lu MB\n", $mem_offline);
-+}
-+
-+sub lsmem_usage()
-+{
-+	print <<HERE;
-+Usage: $script_name [OPTIONS]
-+
-+The $script_name command lists the ranges of available memory with their online
-+status. The listed memory blocks correspond to the memory block representation
-+in sysfs. The command also shows the memory block size, the device size, and
-+the amount of memory in online and offline state.
-+
-+OPTIONS
-+    -a, --all
-+       List each individual memory block, instead of combining memory blocks
-+       with similar attributes.
-+
-+    -h, --help
-+       Print a short help text, then exit.
-+
-+    -v, --version
-+       Print the version number, then exit.
-+HERE
-+}
-+
-+sub lsmem_version()
-+{
-+	print "$script_name: version %S390_TOOLS_VERSION%\n";
-+	print "Copyright IBM Corp. 2010\n";
-+}
-+
-+
-+# Main
-+unless (GetOptions('v|version' => sub {lsmem_version(); exit 0;},
-+		   'h|help'    => sub {lsmem_usage(); exit 0;},
-+		   'a|all'     => \$list_all)) {
-+	die "Try '$script_name --help' for more information.\n";
-+};
-+
-+lsmem_list();
-diff --git a/zconf/lsmem.8 b/zconf/lsmem.8
-new file mode 100644
-index 0000000..ed052ea
---- /dev/null
-+++ b/zconf/lsmem.8
-@@ -0,0 +1,69 @@
-+.TH LSMEM 8 "Apr 2010" s390\-tools
-+.
-+.
-+.SH NAME
-+lsmem \- list the ranges of available memory with their online status.
-+.
-+.
-+.SH SYNOPSIS
-+.B lsmem
-+.RB [OPTIONS]
-+.
-+.
-+.SH DESCRIPTION
-+The lsmem command lists the ranges of available memory with their online
-+status. The listed memory blocks correspond to the memory block representation
-+in sysfs. The command also shows the memory block size, the device size, and
-+the amount of memory in online and offline state.
-+.
-+.SS "Column description"
-+.
-+.TP 4
-+Address Range
-+Start and end address of the memory range.
-+.
-+.TP 4
-+Size
-+Size of the memory range in MB (1024 x 1024 bytes).
-+.
-+.TP 4
-+State
-+Indication of the online status of the memory range. State on->off means
-+that the address range is in transition from online to offline.
-+.
-+.TP 4
-+Removable
-+"yes" if the memory range can be set offline, "no" if it cannot be set offline.
-+A dash ("\-") means that the range is already offline.
-+.
-+.TP 4
-+Device
-+Device number or numbers that correspond to the memory range.
-+
-+Each device represents a memory unit for the hypervisor in control of the
-+memory. The hypervisor cannot reuse a memory unit unless the corresponding
-+memory range is completely offline. For best memory utilization, each device
-+should either be completely online or completely offline.
-+
-+The chmem command with the size parameter automatically chooses the best suited
-+device or devices when setting memory online or offline. The device size depends
-+on the hypervisor and on the amount of total online and offline memory.
-+.
-+.
-+.SH OPTIONS
-+.TP
-+.BR \-a ", " \-\-all
-+List each individual memory block, instead of combining memory blocks with
-+similar attributes.
-+.
-+.TP
-+.BR \-h ", " \-\-help
-+Print a short help text, then exit.
-+.
-+.TP
-+.BR \-v ", " \-\-version
-+Print the version number, then exit.
-+.
-+.
-+.SH SEE ALSO
-+.BR chmem (8)
--- 
-1.7.3.5
-

0052-dumpconf-Prevent-re-IPL-loop-for-dump-on-panic.patch

@@ -1,562 +0,0 @@
-From 9d93b66b6eda5f3dbaf6804663af21927c3aab8f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 28 Jan 2011 14:17:36 +0100
-Subject: [PATCH 52/61] dumpconf: Prevent re-IPL loop for dump on panic
-
-Summary:     dumpconf: Prevent re-IPL loop for dump on panic.
-Description: A new keyword DELAY_MINUTES is introduced in the dumpconf.
-             configuration file. Using this keyword the activation of dumpconf
-             can be delayed in order to prevent potential re-IPL loops.
----
- etc/init.d/dumpconf    |  271 ++++++++++++++++++++++++++++++++++--------------
- etc/sysconfig/dumpconf |   10 ++-
- 2 files changed, 202 insertions(+), 79 deletions(-)
-
-diff --git a/etc/init.d/dumpconf b/etc/init.d/dumpconf
-index 1dd898d..27f52e4 100755
---- a/etc/init.d/dumpconf
-+++ b/etc/init.d/dumpconf
-@@ -15,25 +15,48 @@
- # chkconfig: 0123456 01 99
- 
- DUMP_CONFIG_FILE=/etc/sysconfig/dumpconf
-+CMDFULL=$0
-+CMD="dumpconf"
-+LOCKFILE=/var/lock/subsys/$CMD
-+PIDFILE=/var/run/$CMD.pid
- ERRMSG="Check $DUMP_CONFIG_FILE!"
- 
- RETVAL=0
-+BACKGROUND=0
-+
-+pr_info()
-+{
-+	if [ $BACKGROUND -eq 0 ]; then
-+		echo "$@"
-+	else
-+		echo "$@" | logger -t dumpconf
-+	fi
-+}
-+
-+pr_error()
-+{
-+	if [ $BACKGROUND -eq 0 ]; then
-+		echo "$@" >&2
-+	else
-+		echo "$@" | logger -t dumpconf
-+	fi
-+}
- 
- check_environment()
- {
- 	if [ ! -f $DUMP_CONFIG_FILE ]; then
--		echo "no config file found: $DUMP_CONFIG_FILE"
-+		pr_error "no config file found: $DUMP_CONFIG_FILE"
- 		exit 1
- 	fi
- 
- 	if [ "$(cat /proc/filesystems|grep sysfs)" = "" ]; then
--		echo "no sysfs found" >&2
-+		pr_error "no sysfs found"
- 		exit 1 
- 	fi
- 
- 	SYSFSDIR=$(cat /proc/mounts|awk '$3=="sysfs"{print $2; exit}')
- 	if [ "$SYSFSDIR" = "" ]; then
--		echo "sysfs not mounted" >&2
-+		pr_error "sysfs not mounted"
- 		exit 1
- 	fi
- 
-@@ -41,12 +64,12 @@ check_environment()
- 	ON_PANIC_CONFIG_FILE=/$SYSFSDIR/firmware/shutdown_act\
- ions/on_panic
- 	if [ ! -d $DUMP_CONFIG_DIR ]; then
--		echo "kernel has no dump on panic support"
-+		pr_info "kernel has no dump on panic support"
- 		exit 0
- 	fi
- 	REIPL_CONFIG_DIR=/$SYSFSDIR/firmware/reipl
- 	if [ ! -d $REIPL_CONFIG_DIR ]; then
--		echo "kernel has no dump on panic support"
-+		pr_info "kernel has no dump on panic support"
- 		exit 0
- 	fi
- 	VMCMD_CONFIG_DIR=/$SYSFSDIR/firmware/vmcmd
-@@ -90,6 +113,43 @@ Try 'dumpconf --help' for more information.
- EOF
- }
- 
-+cleanup_pidfile()
-+{
-+	if [ $(ps $1 | grep $CMD | wc -l) -eq 0 ]; then
-+		rm -f $PIDFILE
-+	fi
-+}
-+
-+handle_stop_request()
-+{
-+	rm -f $PIDFILE 2>/dev/null
-+	exit 0
-+}
-+
-+delay_activation()
-+{
-+	# Open lock file with file descriptor 123
-+	exec 123>$LOCKFILE
-+	if flock -n -x 123; then
-+		if [ -f $PIDFILE ]; then
-+			# concurrent process was faster
-+			exit 0
-+		fi
-+		trap handle_stop_request TERM
-+		echo $$ > $PIDFILE
-+	else
-+		# Nothing to do, "dumpconf start" is already in progress
-+		exit 0
-+	fi
-+	# Close file descriptor 123
-+	exec 123>&-
-+	# Do multiple sleeps in order to be interruptible
-+	for ((i=0; i < $DELAY_MINUTES * 60; i++)); do
-+		sleep 1
-+	done
-+	rm -f $PIDFILE
-+}
-+
- # $1: dump device bus id (e.g. 0.0.4711)
- verify_ccw_dump_device()
- {
-@@ -98,7 +158,7 @@ verify_ccw_dump_device()
- 		line=$(lsdasd $1)
- 	fi
- 	if [ "$line" == "" ]; then
--		echo "WARNING: device $1 not found!"
-+		pr_info "WARNING: device $1 not found!"
- 		return 1
- 	fi
- 	found=false
-@@ -115,7 +175,7 @@ verify_ccw_dump_device()
- 	if [ $? == 0 ]; then
- 		return 0
- 	else
--		echo "WARNING: $1 is no valid dump device!"
-+		pr_info "WARNING: $1 is no valid dump device!"
- 		return 1
- 	fi
- }
-@@ -166,28 +226,28 @@ setup_device()
- 		echo $DEV > $1/$2/device
- 	else
- 		RETVAL=1
--		echo "ERROR: Invalid DEVICE '$DEVICE'." $ERRMSG >&2
-+		pr_error "ERROR: Invalid DEVICE '$DEVICE'." $ERRMSG
- 		return
- 	fi
- 	if [ $2 == "fcp" ]; then
- 		echo $WWPN > $1/fcp/wwpn 2>/dev/null || RETVAL=1
- 		if [ $RETVAL -eq 1 ]; then
--			echo "ERROR: Invalid WWPN '$WWPN'." $ERRMSG >&2
-+			pr_error "ERROR: Invalid WWPN '$WWPN'." $ERRMSG
- 			return
- 		fi
- 		echo $LUN > $1/fcp/lun 2>/dev/null || RETVAL=1
- 		if [ $RETVAL -eq 1 ]; then
--			echo "ERROR: Invalid LUN '$LUN'." $ERRMSG >&2
-+			pr_error "ERROR: Invalid LUN '$LUN'." $ERRMSG
- 			return
- 		fi
- 		echo $BOOTPROG > $1/fcp/bootprog 2>/dev/null || RETVAL=1
- 		if [ $RETVAL -eq 1 ]; then
--			echo "ERROR: Invalid BOOTPROG '$BOOTPROG'." $ERRMSG >&2
-+			pr_error "ERROR: Invalid BOOTPROG '$BOOTPROG'." $ERRMSG
- 			return
- 		fi
- 		echo $BR_LBA > $1/fcp/br_lba 2>/dev/null || RETVAL=1
- 		if [ $RETVAL -eq 1 ]; then
--			echo "ERROR: Invalid BR_LBA '$BR_LBA'." $ERRMSG >&2
-+			pr_error "ERROR: Invalid BR_LBA '$BR_LBA'." $ERRMSG
- 			return
- 		fi
- 	fi
-@@ -201,7 +261,7 @@ setup_nss_device()
- setup_reipl()
- {
- 	if [ "$REIPL_TYPE" == "" ]; then
--		echo "reipl on panic configured: Using default reipl values."
-+		pr_info "reipl on panic configured: Using default reipl values."
- 		return
- 	fi
- 
-@@ -210,7 +270,7 @@ setup_reipl()
- 	elif [ "$REIPL_TYPE" == "nss" ]; then
- 		setup_nss_device $REIPL_CONFIG_DIR
- 	else
--		echo "ERROR: Unknown reipl type '$REIPL_TYPE'." $ERRMSG >&2
-+		pr_error "ERROR: Unknown reipl type '$REIPL_TYPE'." $ERRMSG
- 		RETVAL=1
- 		return
- 	fi
-@@ -221,7 +281,7 @@ setup_reipl()
- 		return
- 	fi
- 
--	echo "$REIPL_TYPE reipl device configured."
-+	pr_info "$REIPL_TYPE reipl device configured."
- }
- 
- setup_dump()
-@@ -229,7 +289,7 @@ setup_dump()
- 	if [ "$DUMP_TYPE" == "ccw" ] || [ "$DUMP_TYPE" == "fcp" ]; then
- 		setup_device $DUMP_CONFIG_DIR $DUMP_TYPE
- 	elif [ "$DUMP_TYPE" != "none" ]; then
--		echo "ERROR: Unknown dump type '$DUMP_TYPE'." $ERRMSG >&2
-+		pr_error "ERROR: Unknown dump type '$DUMP_TYPE'." $ERRMSG
- 		RETVAL=1
- 		return
- 	fi
-@@ -241,7 +301,7 @@ setup_dump()
- 		return
- 	fi
- 
--	echo "$ON_PANIC on panic configured: Using $DUMP_TYPE dump device."
-+	pr_info "$ON_PANIC on panic configured: Using $DUMP_TYPE dump device."
- }
- 
- setup_on_panic_vmcmd()
-@@ -257,69 +317,69 @@ setup_on_panic_vmcmd()
- 		fi
- 	done
- 	if [ ! -d $VMCMD_CONFIG_DIR ]; then
--		echo "ERROR: No vmcmd support. Are you running on LPAR?" >&2
-+		pr_error "ERROR: No vmcmd support. Are you running on LPAR?"
- 		RETVAL=1
- 	elif [ "$VMCMD" == "" ]; then
--		echo "ERROR: No VMCMD_x keyword specified." $ERRMSG >&2
-+		pr_error "ERROR: No VMCMD_x keyword specified." $ERRMSG
- 		RETVAL=1
- 	else
- 		echo -en "$VMCMD" | cat > $VMCMD_CONFIG_DIR/on_panic || RETVAL=1
- 	fi
- 
- 	if [ $RETVAL -eq 0 ]; then
--		echo "vmcmd on panic configured:"
--		echo -e "$VMCMD"
-+		pr_info "vmcmd on panic configured:"
-+		pr_info -e "$VMCMD"
- 	fi
- }
- 
- print_fcp_device()
- {
- 	DEVICE=$(cat $1/fcp/device) || RETVAL=1
--	echo "device..: $DEVICE"
-+	pr_info "device..: $DEVICE"
- 	WWPN=$(cat $1/fcp/wwpn) || RETVAL=1
--	echo "wwpn....: $WWPN"
-+	pr_info "wwpn....: $WWPN"
- 	LUN=$(cat $1/fcp/lun) || RETVAL=1
--	echo "lun.....: $LUN"
-+	pr_info "lun.....: $LUN"
- 	BOOTPROG=$(cat $1/fcp/bootprog) || RETVAL=1
--	echo "bootprog: $BOOTPROG"
-+	pr_info "bootprog: $BOOTPROG"
- 	BR_LBA=$(cat $1/fcp/br_lba) || RETVAL=1
--	echo "br_lba..: $BR_LBA"
-+	pr_info "br_lba..: $BR_LBA"
- }
- 
- print_ccw_device()
- {
- 	DEVICE=$(cat $1/ccw/device) || RETVAL=1
--	echo "device..: $DEVICE"
-+	pr_info "device..: $DEVICE"
- }
- 
- print_nss_name()
- {
- 	NAME=$(cat $1/nss/device) || RETVAL=1
--	echo "device..: $NAME"
-+	pr_info "device..: $NAME"
- }
- 
- status_dump()
- {
- 	CONF_DUMP_TYPE=$(cat $DUMP_CONFIG_DIR/dump_type) || RETVAL=1
- 	if [ "$CONF_DUMP_TYPE" == "none" ]; then
--		echo "type....: no dump device configured"
-+		pr_info "type....: no dump device configured"
- 	elif [ "$CONF_DUMP_TYPE" == "ccw" ]; then
--		echo "type....: ccw"
-+		pr_info "type....: ccw"
- 		print_ccw_device $DUMP_CONFIG_DIR
- 		verify_ccw_dump_device $(cat $DUMP_CONFIG_DIR/ccw/device)
- 	elif [ "$CONF_DUMP_TYPE" == "fcp" ]; then
--		echo "type....: fcp"
-+		pr_info "type....: fcp"
- 		print_fcp_device $DUMP_CONFIG_DIR
- 	else
--		echo "ERROR: Unknown dump device type '$CONF_DUMP_TYPE'!" >&2
--		echo "       Please check if you have the latest dumpconf package!" >&2
-+		pr_error "ERROR: Unknown dump device type '$CONF_DUMP_TYPE'!"
-+		pr_error "       Please check if you have the latest dumpconf package!"
- 	fi
- }
- 
- status_reipl()
- {
- 	REIPL_TYPE=$(cat $REIPL_CONFIG_DIR/reipl_type) || RETVAL=1
--	echo "type....: $REIPL_TYPE"
-+	pr_info "type....: $REIPL_TYPE"
- 	if [ "$REIPL_TYPE" == "ccw" ]; then
- 		print_ccw_device $REIPL_CONFIG_DIR
- 	elif [ "$REIPL_TYPE" == "fcp" ]; then
-@@ -327,16 +387,16 @@ status_reipl()
- 	elif [ "$REIPL_TYPE" == "nss" ]; then
- 		print_nss_name $REIPL_CONFIG_DIR
- 	else
--		echo "ERROR: Unknown reipl device type '$REIPL_TYPE'!" >&2
--		echo "       Please check if you have the latest dumpconf package!" >&2
-+		pr_error "ERROR: Unknown reipl device type '$REIPL_TYPE'!"
-+		pr_error "       Please check if you have the latest dumpconf package!"
- 	fi
- }
- 
- status_dump_reipl()
- {
--	echo -e "\ndump:"
-+	pr_info -e "\ndump:"
- 	status_dump
--	echo -e "\nreipl:"
-+	pr_info -e "\nreipl:"
- 	status_reipl
- }
- 
-@@ -345,33 +405,65 @@ status_vmcmd()
- {
- 	VMCMD=$(cat $VMCMD_CONFIG_DIR/on_panic) || RETVAL=1
- 	if [ "$VMCMD" == "" ]; then
--		echo "WARNING: No VM command specified!"
-+		pr_info "WARNING: No VM command specified!"
- 	else
--		echo "---------------"
--		echo "$VMCMD"
-+		pr_info "---------------"
-+		pr_info "$VMCMD"
- 	fi
- }
- 
- start()
- {
-+	if [ "$1" == "background" ]; then
-+		BACKGROUND=1
-+	fi
-+	test -n "$DELAY_MINUTES" || DELAY_MINUTES=0
-+	test "$DELAY_MINUTES" -ge 0 2>/dev/null || RETVAL=1
-+	if [ $RETVAL -eq 1 ]; then
-+		pr_error "ERROR: Invalid DELAY_MINUTES parameter" \
-+			"'$DELAY_MINUTES'." $ERRMSG
-+		return
-+	fi
-+	if [ $DELAY_MINUTES -gt 0 ]; then
-+		if [ -f $PIDFILE ]; then
-+			pr_info "A delayed instance of" $CMD \
-+				"is already active."
-+			return
-+		fi
-+		if [ $BACKGROUND -eq 1 ]; then
-+			delay_activation
-+		else
-+			pr_info "The activation of dumpconf is being delayed" \
-+				"for" $DELAY_MINUTES "minutes"
-+			$CMDFULL start background > /dev/null 2>&1 &
-+			return
-+		fi
-+	fi
- 	if [ "$ON_PANIC" == "" ]; then
- 		ON_PANIC="stop"
- 	fi
- 
--	if [ "$ON_PANIC" == "reipl" ]; then
--		setup_reipl
--	elif [ "$ON_PANIC" == "dump" ] || [ "$ON_PANIC" == "dump_reipl" ]; then
--		setup_dump
--	elif [ "$ON_PANIC" == "vmcmd" ]; then
--		setup_on_panic_vmcmd
--	elif [ "$ON_PANIC" == "stop" ]; then
--		echo "stop on panic configured."
--	else
--		echo "ERROR: Unknown 'on panic' type '$ON_PANIC'." $ERRMSG >&2
--		RETVAL=1
--	fi
-+	case "$ON_PANIC" in
-+		reipl)
-+			setup_reipl
-+			;;
-+		dump|dump_reipl)
-+			setup_dump
-+			;;
-+		vmcmd)
-+			setup_on_panic_vmcmd
-+			;;
-+		stop)
-+			pr_info "stop on panic configured."
-+			;;
-+		*)
-+			pr_error "ERROR: Unknown 'on panic'" \
-+				"type '$ON_PANIC'." $ERRMSG
-+			RETVAL=1
-+			;;
-+	esac
- 	if [ $RETVAL -eq 1 ]; then
--		return $RETVAL
-+		return
- 	fi
- 
- 	echo $ON_PANIC > $ON_PANIC_CONFIG_FILE 2> /dev/null || RETVAL=1
-@@ -380,20 +472,21 @@ start()
- 
- 	if [ $RETVAL -eq 1 ]; then
- 		echo stop > $ON_PANIC_CONFIG_FILE
--		echo "ERROR: $ON_PANIC not supported by hardware!" >&2
-+		pr_error "ERROR: $ON_PANIC not supported by hardware!"
- 	fi
--
--	return $RETVAL
- }
- 
- stop()
- {
-+	if [ -f $PIDFILE ]; then
-+		kill -TERM $(cat $PIDFILE)
-+	fi
- 	echo none > $DUMP_CONFIG_DIR/dump_type || RETVAL=1
- 	echo stop > $ON_PANIC_CONFIG_FILE || RETVAL=1
- 	if [ $RETVAL -eq 0 ]; then
--		echo "Dump on panic is disabled now"
-+		pr_info "Dump on panic is disabled now"
- 	else
--		echo "Disabling dump on panic failed" >&2
-+		pr_error "Disabling dump on panic failed"
- 	fi
- 	return $RETVAL
- }
-@@ -401,34 +494,55 @@ stop()
- status()
- {
- 	ON_PANIC=$(cat $ON_PANIC_CONFIG_FILE) || RETVAL=1
--	echo "on_panic: $ON_PANIC"
--	if [ "$ON_PANIC" == "vmcmd" ]; then
--		status_vmcmd
--	elif [ "$ON_PANIC" == "reipl" ]; then
--		status_reipl
--	elif [ "$ON_PANIC" == "dump" ]; then
--		status_dump
--	elif [ "$ON_PANIC" == "dump_reipl" ]; then
--		status_dump_reipl
--	elif [ "$ON_PANIC" != "stop" ]; then
--		echo "ERROR: Unknown on_panic type '$ON_PANIC'" >&2
-+	if [ -f $PIDFILE ]; then
-+		pr_info "on_panic: $ON_PANIC - dumpconf activation is being" \
-+			"delayed for $DELAY_MINUTES minutes"
-+	else
-+		pr_info "on_panic: $ON_PANIC"
- 	fi
-+	case "$ON_PANIC" in
-+		vmcmd)
-+			status_vmcmd
-+			;;
-+		reipl)
-+			status_reipl
-+			;;
-+		dump)
-+			status_dump
-+			;;
-+		dump_reipl)
-+			status_dump_reipl
-+			;;
-+		stop)
-+			;;
-+		*)
-+			pr_error "ERROR: Unknown on_panic type '$ON_PANIC'"
-+			;;
-+	esac
- }
- 
--if [ "$1" = "-h" ] || [ "$1" = "--help" ]; then
--	printhelp
--	exit 0
--elif [ "$1" = "-v" ] || [ "$1" = "--version" ]; then
--	printversion
--	exit 0
--fi
-+case "$1" in
-+	-h|--help)
-+		printhelp
-+		exit 0
-+		;;
-+	-v|--version)
-+		printversion
-+		exit 0
-+		;;
-+esac
- 
- check_environment
- 
-+# If system crashed, an invalid $PIDFILE might still exist
-+if [ -f $PIDFILE ]; then
-+	cleanup_pidfile $(cat $PIDFILE)
-+fi
-+
- # See how we were called.
- case "$1" in
- 	start|restart|reload|force-reload|try-restart)
--		start
-+		start $2
- 		;;
- 	stop)
- 		stop
-@@ -439,6 +553,7 @@ case "$1" in
- 	*)
- 		print_invalid_option $1
- 		RETVAL=1
-+		;;
- esac
- 
- exit $RETVAL
-diff --git a/etc/sysconfig/dumpconf b/etc/sysconfig/dumpconf
-index cef621b..155a2cc 100644
---- a/etc/sysconfig/dumpconf
-+++ b/etc/sysconfig/dumpconf
-@@ -13,13 +13,19 @@
- #               /sys/firmware/reipl
- #
- 
--#
-+# For the actions "reipl" and "dump_reipl" the DELAY_MINUTES keyword may
-+# be used to delay the activation of dumpconf.
-+# Thus potential reipl loops caused by kernel panics
-+# which persistently occur early in the boot process can be prevented.
-+
- # Dump on ccw device (DASD) and re-IPL after dump is complete.
- # The re-IPL device, as specified under "/sys/firmware/reipl", is used.
-+# The activation of dumpconf is delayed by 5 minutes.
- #
- # ON_PANIC=dump_reipl
- # DUMP_TYPE=ccw
- # DEVICE=0.0.4e13
-+# DELAY_MINUTES=5
- 
- #
- # Dump on fcp device (SCSI Disk)
-@@ -48,5 +54,7 @@
- #
- # Re-IPL on panic
- # The re-IPL device, as specified under "/sys/firmware/reipl", is used.
-+# Since the DELAY_MINUTES keyword is omitted, there is no delay and
-+# dumpconf becomes active immediately during system startup.
- #
- # ON_PANIC=reipl
--- 
-1.7.3.5
-

0053-ttyrun-run-a-program-if-a-terminal-device-is-availab.patch

@@ -1,410 +0,0 @@
-From bc6e654149018090b7954e6667d3c7e7654625f6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 28 Jan 2011 14:18:39 +0100
-Subject: [PATCH 53/61] ttyrun: run a program if a terminal device is available
-
-Summary:     ttyrun: run a program if a terminal device is available
-Description: Depending on your setup, Linux on System z might or might not
-             provide a particular terminal or console. ttyrun safely starts
-             getty programs and prevents respawns through the init program
-             if a terminal is not available.
----
- iucvterm/doc/Makefile |    2 +-
- iucvterm/doc/ttyrun.8 |  146 +++++++++++++++++++++++++++++++++++++++
- iucvterm/src/Makefile |   11 +++-
- iucvterm/src/ttyrun.c |  183 +++++++++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 339 insertions(+), 3 deletions(-)
- create mode 100644 iucvterm/doc/ttyrun.8
- create mode 100644 iucvterm/src/ttyrun.c
-
-diff --git a/iucvterm/doc/Makefile b/iucvterm/doc/Makefile
-index 5815f21..a646765 100644
---- a/iucvterm/doc/Makefile
-+++ b/iucvterm/doc/Makefile
-@@ -2,7 +2,7 @@
- 
- include ../../common.mak
- 
--MANS = iucvconn.1 iucvtty.1 ts-shell.1 hvc_iucv.9 chiucvallow.8
-+MANS = iucvconn.1 iucvtty.1 ts-shell.1 hvc_iucv.9 chiucvallow.8 ttyrun.8
- 
- all:
- 
-diff --git a/iucvterm/doc/ttyrun.8 b/iucvterm/doc/ttyrun.8
-new file mode 100644
-index 0000000..fc7a16f
---- /dev/null
-+++ b/iucvterm/doc/ttyrun.8
-@@ -0,0 +1,146 @@
-+.\" ttyrun.8
-+.\"
-+.\"
-+.\" Copyright IBM Corp. 2010
-+.\" Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
-+.\" -------------------------------------------------------------------------
-+.TH "ttyrun" "8" "April 2010" "s390-tools" "System Management Commands"
-+.LO 8
-+.
-+.ds s ttyrun
-+.
-+.
-+.SH NAME
-+ttyrun \- Start a program if a specified terminal device is available
-+.
-+.
-+.
-+.SH SYNOPSIS
-+.B \*s
-+.RB [ \-e | \-\-exitstatus
-+.IR status ]
-+.I term
-+.I program
-+.RI [ "program_options" ]
-+.br
-+.B \*s
-+.RB [ \-h | \-\-help ]
-+.br
-+.B \*s
-+.RB [ \-v | \-\-version ]
-+.
-+.
-+.
-+.SH DESCRIPTION
-+\fB\*s\fP is typically started during system initialization and is used
-+to prevent a respawn through the
-+.BR init (8)
-+program when a terminal is not available.
-+
-+\fIterm\fP is the name of the terminal device and is a path relative to
-+the \f(CW/dev\fP directory, for example, specify \f(CWhvc0\fP for
-+\f(CW/dev/hvc0\fP.
-+.br
-+If the specified terminal device can be opened, \fB\*s\fP starts the
-+specified program.
-+
-+If the terminal device cannot be opened, the behavior of \fB\*s\fP
-+depends on the \fB\-e\fP option:
-+.
-+.RS 2
-+.IP "\(bu" 2
-+If the \fB\-e\fP option has been specified, \fB\*s\fP exits with the
-+specified return value, or
-+.IP "\(bu" 2
-+If the \fB\-e\fP option has not been specified,  \fB\*s\fP sleeps until
-+it receives a signal that causes an exit.
-+.RE
-+.PP
-+\fIprogram\fP is an absolute path to the program to be started by
-+\fB\*s\fP and \fIprogram_options\fP specify additional arguments.
-+Depending on the program, arguments might be required.  The variable
-+\f(CW%t\fP in the \fIprogram_options\fP is resolved to the terminal
-+device specified with \fIterm\fP.
-+.
-+.
-+.
-+.SH OPTIONS
-+.TP
-+.BR \-e ", " \-\-exitstatus\~\fIstatus\fP
-+Specifies an exit status that is returned when the terminal device
-+is not available.  \fIstatus\fP must be an integer in the range 1 to 255.
-+
-+You can use this status value in an upstart job file to prevent
-+respawning.
-+.
-+.TP
-+.BR \-h ", " \-\-help
-+Displays a short help text, then exits.
-+.
-+.TP
-+.BR \-v ", " \-\-version
-+Displays the version number of \fB\*s\fP, then exits.
-+.
-+.
-+.
-+.SH "RETURN VALUES"
-+\fB\*s\fP exits with one of the following return values to report an
-+error condition:
-+.TP
-+.B 1
-+\fB\*s\fP has been started with an argument that is not valid or
-+required but missing.
-+.TP
-+.B 2
-+\fB\*s\fP could open the file specified for \fIterm\fP but the
-+file is not a terminal device.
-+.TP
-+.B 3
-+\fB\*s\fP could not start the specified program.
-+.PP
-+The return values 1 to 3 might also be returned when the \fB\-e\fP
-+option is used and the terminal device is not available.
-+.TP
-+.B 4 \- 255
-+The terminal device is not available and the \fB\-e\fP option
-+specifies an exit status in this range.
-+.
-+.
-+.
-+.SH "EXAMPLES"
-+.SS inittab
-+To start \fB/sbin/agetty\fP on terminal device "hvc1", specify:
-+.PP
-+.ft CW
-+.in +0.25in
-+.nf
-+h1:2345:respawn:/sbin/\*s hvc1 /sbin/agetty -L 9600 %t linux
-+.fi
-+.in -0.25in
-+.ft
-+.
-+.SS upstart job/event files
-+To start \fB/sbin/agetty\fP on terminal device "hvc1", add the following
-+settings to the job file:
-+.PP
-+.ft CW
-+.in +0.25in
-+.nf
-+respawn
-+normal exit 42
-+exec /sbin/\*s -e 42 hvc1 /sbin/agetty -L 9600 %t linux
-+.fi
-+.in -0.25in
-+.ft
-+.PP
-+With the normal exit statement, you specify an exit status that will
-+prevent upstart from respawning the program.  To prevent respawning with
-+\fB\*s\fP, you must specify the same value for the \fB\-e\fP option.
-+.
-+.
-+.
-+.SH "SEE ALSO"
-+.BR agetty (8),
-+.BR mingetty (8),
-+.BR inittab (5),
-+.BR events (5)
-diff --git a/iucvterm/src/Makefile b/iucvterm/src/Makefile
-index f1f8f7c..369c887 100644
---- a/iucvterm/src/Makefile
-+++ b/iucvterm/src/Makefile
-@@ -11,20 +11,27 @@ CPPFLAGS += -DUSE_NLS -DGETTEXT_TEXTDOMAIN=\"$(GETTEXT_TEXTDOMAIN)\"
- #CPPFLAGS += -D__DEBUG__
- 
- PROGRAMS = iucvconn iucvtty
-+SYSTOOLS = ttyrun
- 
--all: $(PROGRAMS)
-+all: $(PROGRAMS) $(SYSTOOLS)
- check:
- install:
- 	for prg in $(PROGRAMS); do \
- 	  $(INSTALL) -g $(GROUP) -o $(OWNER) -m 755 $$prg $(USRBINDIR) ; \
- 	done
-+	for prg in $(SYSTOOLS); do \
-+	  $(INSTALL) -g $(GROUP) -o $(OWNER) -m 755 $$prg $(BINDIR) ; \
-+	done
- 
- clean:
--	-rm -f *.o $(PROGRAMS)
-+	-rm -f *.o $(PROGRAMS) $(SYSTOOLS)
- 
- iucvconn: iucvconn.o getopt.o auditlog.o functions.o
- 
- iucvtty: LDLIBS = -lutil
- iucvtty: iucvtty.o getopt.o auditlog.o functions.o
- 
-+ttyrun: GETTEXT_TEXTDOMAIN = ttyrun
-+ttyrun: ttyrun.o
-+
- .PHONY: install clean
-diff --git a/iucvterm/src/ttyrun.c b/iucvterm/src/ttyrun.c
-new file mode 100644
-index 0000000..55c2bc2
---- /dev/null
-+++ b/iucvterm/src/ttyrun.c
-@@ -0,0 +1,183 @@
-+/*
-+ * ttyrun - Start a program if a specified terminal device is available
-+ *
-+ *
-+ * ttyrun is typically used to prevent a respawn through the init(8)
-+ * program when a terminal is not available.
-+ * ttyrun runs the specific program if the specified terminal device
-+ * can be opened successfully.  Otherwise the program enters a sleep or
-+ * exits with a specified return value.
-+ *
-+ * Example: To start /sbin/agetty on terminal device hvc1, use:
-+ *
-+ *	 h1:2345:respawn:/sbin/ttyrun hvc1 /sbin/agetty -L 9600 %t linux
-+ *
-+ * Note: %t is resolved to the terminal device "hvc1" before /sbin/agetty
-+ *	 is started.
-+ *
-+ * Return values:
-+ *	   1 - invalid argument or parameter is missing
-+ *	   2 - terminal does not resolve to a terminal device
-+ *	   3 - starting the specified program failed
-+ *    1..255 - terminal is not available and the return code is
-+ *	       specified with the -e option
-+ *
-+ * Copyright IBM Corp. 2010
-+ * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
-+ */
-+#include <errno.h>
-+#include <getopt.h>
-+#include <limits.h>
-+#include <signal.h>
-+#include <stdlib.h>
-+#include <stdio.h>
-+#include <string.h>
-+#include <sys/types.h>
-+#include <syslog.h>
-+#include <fcntl.h>
-+#include <unistd.h>
-+
-+#include "zt_common.h"
-+
-+
-+#define TTY_ESCAPE_STR		"%t"
-+
-+#define EXIT_INVALID_ARG	1
-+#define EXIT_NO_TERMINAL	2
-+#define EXIT_EXEC_FAILED	3
-+
-+
-+static const char usage[] =
-+"Usage: %s [-e status] <term> <program> [<program_options>]\n"
-+"       %s [-h|--help] [-v|--version]\n"
-+"\n"
-+"Start the program if the specified terminal device is available.\n"
-+"If the terminal device cannot be opened, sleep until a signal is received\n"
-+"that causes an exit or exit with the return value specified with status.\n"
-+"\n"
-+"-e, --exitstatus     Specifies an exit status in the range 1 to 255.\n"
-+"-h, --help           Displays this help, then exits.\n"
-+"-v, --version        Displays version information, then exits.\n";
-+
-+static void help_exit(const char *prg)
-+{
-+	printf(usage, prg, prg);
-+	exit(EXIT_SUCCESS);
-+}
-+
-+static void version_exit(const char *prg)
-+{
-+	printf("%s: Start a program if a terminal device is available, "
-+	       "version %s\n", prg, RELEASE_STRING);
-+	printf("Copyright IBM Corp. 2010\n");
-+	exit(EXIT_SUCCESS);
-+}
-+
-+static void err_exit(const char *prg, const char *msg)
-+{
-+	fprintf(stderr, "%s: %s\n", prg, msg);
-+	exit(EXIT_INVALID_ARG);
-+}
-+
-+static void wait_and_exit(void)
-+{
-+	/* sleep until a signal is received, then exit */
-+	pause();
-+	exit(EXIT_SUCCESS);
-+}
-+
-+static const struct option prog_opts[] = {
-+	{ "help",	no_argument, NULL, 'h'},
-+	{ "version",	no_argument, NULL, 'v'},
-+	{ "exitstatus",	required_argument, NULL, 'e'},
-+	{ NULL,		no_argument, NULL,  0 },
-+};
-+
-+int main(int argc, char *argv[])
-+{
-+	int rc, tty, i, c, index, done, term_index;
-+	char terminal[PATH_MAX] = "";
-+	unsigned long exitstatus;
-+
-+
-+	/* parse command options */
-+	if (argc == 1)
-+		err_exit(argv[0], "One or more options are required but missing");
-+
-+	exitstatus = done = term_index = 0;
-+	while (!done) {
-+		c = getopt_long(argc, argv, "-hve:", prog_opts, NULL);
-+		switch (c) {
-+		case -1:
-+			done = 1;
-+			break;
-+		case 1:
-+			/* the first non-optional argument must be the
-+			 * terminal device */
-+			if (!strncmp(optarg, "/", 1))
-+				strncpy(terminal, optarg, PATH_MAX - 1);
-+			else
-+				snprintf(terminal, PATH_MAX, "/dev/%s", optarg);
-+			terminal[PATH_MAX - 1] = 0;
-+			term_index = optind - 1;
-+			done = 1;
-+			break;
-+		case 'e':
-+			errno = 0;
-+			exitstatus = strtoul(optarg, (char **) NULL, 10);
-+			if (errno == ERANGE)
-+				err_exit(argv[0], "The exit status must be "
-+					"an integer in the range 1 to 255");
-+
-+			if (!exitstatus || exitstatus > 255)
-+				err_exit(argv[0], "The exit status must be "
-+					 "in the range 1 to 255");
-+			break;
-+		case 'h':
-+			help_exit(argv[0]);
-+		case 'v':
-+			version_exit(argv[0]);
-+		case '?':
-+			fprintf(stderr, "Try %s --help for more information\n",
-+				argv[0]);
-+			exit(EXIT_INVALID_ARG);
-+		}
-+	}
-+	index = optind;
-+
-+	/* check terminal */
-+	if (!strlen(terminal))
-+		err_exit(argv[0], "You must specify the name of "
-+				  "a terminal device");
-+
-+	/* any program to start? */
-+	if (index == argc)
-+		err_exit(argv[0], "You must specify a program to start");
-+
-+	/* open and check terminal device */
-+	tty = open(terminal, O_NOCTTY | O_RDONLY | O_NONBLOCK);
-+	if (tty == -1) {
-+		openlog(argv[0], LOG_PID, LOG_DAEMON);
-+		syslog(LOG_INFO, "Could not open tty %s (%s)", terminal,
-+		       strerror(errno));
-+		closelog();
-+
-+		/* enter wait or exit */
-+		if (exitstatus)
-+			exit(exitstatus);
-+		wait_and_exit();
-+	}
-+	rc = !isatty(tty);
-+	close(tty);
-+	if (rc)
-+		exit(EXIT_NO_TERMINAL);
-+
-+	/* start getty program */
-+	for (i = index; i < argc; i++)
-+		if (!strcmp(argv[i], TTY_ESCAPE_STR) && term_index)
-+			argv[i] = argv[term_index];
-+	if (execv(argv[index], argv + index))
-+		exit(EXIT_EXEC_FAILED);
-+
-+	exit(EXIT_SUCCESS);
-+}
--- 
-1.7.3.5
-

0055-znetconf-support-for-OSA-CHPID-types-OSX-and-OSM.patch

@@ -1,91 +0,0 @@
-From 7700e2333725199a42d929ceb7af803c609df196 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 28 Jan 2011 14:22:16 +0100
-Subject: [PATCH 55/61] znetconf: support for OSA CHPID types OSX and OSM
-
-Summary:     znetconf: support for OSA CHPID types OSX and OSM
-Description: New feature to enable znetconf to support the
-             new OSA CHPID types OSX and OSM.
----
- zconf/lsznet.raw       |   12 ++++++++++++
- zconf/znetcontrolunits |    6 +++++-
- 2 files changed, 17 insertions(+), 1 deletions(-)
-
-diff --git a/zconf/lsznet.raw b/zconf/lsznet.raw
-index 9821ba3..a9f1247 100755
---- a/zconf/lsznet.raw
-+++ b/zconf/lsznet.raw
-@@ -41,6 +41,8 @@ readonly -a CU_CARDTYPE=(
-     "LCS OSA"
-     "LCS CLAW"
-     "OSN"
-+    "OSX"
-+    "OSM"
- )
- 
- readonly -a CU_DEVNAME=(
-@@ -53,6 +55,8 @@ readonly -a CU_DEVNAME=(
-     eth
-     eth
-     osn
-+    eth
-+    eth
- )
- 
- readonly -a CU_GROUPCHANNELS=(
-@@ -65,6 +69,8 @@ readonly -a CU_GROUPCHANNELS=(
-     2
-     2
-     3
-+    3
-+    3
- )
- 
- readonly -a CHPIDTYPES=(
-@@ -72,6 +78,8 @@ readonly -a CHPIDTYPES=(
-     [0x11]=OSD
-     [0x15]=OSN
-     [0x24]=IQD
-+    [0x30]=OSM
-+    [0x31]=OSX
- )
- 
- # whitelist of network devices for TCP/IP stack, e.g. for Linux installers
-@@ -83,6 +91,10 @@ readonly -a CU_TCPIP=(
-     3088/1e
-     3088/01
-     3088/60
-+    3088/61
-+    1731/06
-+    1731/02
-+    1731/02
- )
- 
- readonly PREFIXFORMAT=[[:xdigit:]]*
-diff --git a/zconf/znetcontrolunits b/zconf/znetcontrolunits
-index e54e34b..7ee65f7 100644
---- a/zconf/znetcontrolunits
-+++ b/zconf/znetcontrolunits
-@@ -23,6 +23,8 @@ readonly -a CU=(
-     3088/60
-     3088/61
-     1731/06
-+    1731/02
-+    1731/02
- )
- 
- readonly -a CU_DEVDRV=(
-@@ -33,7 +35,9 @@ readonly -a CU_DEVDRV=(
-     ctcm
-     lcs
-     lcs
--    lcs
-+    claw
-+    qeth
-+    qeth
-     qeth
- )
- 
--- 
-1.7.3.5
-

0056-iucvtty-do-not-specify-z-VM-user-ID-as-argument-to-l.patch

@@ -1,68 +0,0 @@
-From ed12fec98c2365593e3b8bac14701112051028ad Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 28 Jan 2011 14:24:23 +0100
-Subject: [PATCH 56/61] iucvtty: do not specify z/VM user ID as argument to login -h
-
-Description: iucvtty: do not specify z/VM user ID as argument to login -h
-Symptom:     When establishing a terminal connection to an iucvtty
-		instance on a target system, iucvconn disconnects due to a
-		timeout of the login program.  Users are not able to log in.
-Problem:     iucvtty passes the z/VM user ID of the originating guest
-		virtual machine as argument to the -h option of the login
-		program.  The -h option specifies a host name that is used
-		when writing [uw]tmp records.  Depending on the implementation
-		of the login program, login calls gethostbyname() to get the
-		FQDN of the hostname.  If the target system does not have any
-		working network connection, the DNS query times out.  The DNS
-		timeout might be greater than the timeout the login program
-		waits for user input.  The login timeout is caused by a SIGALRM
-		signal that is registered before login calls gethostbyname().
-		If the DNS timeout is greater, login exits.
-Solution:    Do not specify the z/VM user ID when iucvtty starts the login
-		program.  The workaround to avoid timeouts is to explicitly
-		specify the login program when starting iucvtty.
-		For example, use "iucvtty TERMID -- /bin/login".
----
- iucvterm/src/iucvtty.c |   12 +++---------
- 1 files changed, 3 insertions(+), 9 deletions(-)
-
-diff --git a/iucvterm/src/iucvtty.c b/iucvterm/src/iucvtty.c
-index b9a2754..ef7e212 100644
---- a/iucvterm/src/iucvtty.c
-+++ b/iucvterm/src/iucvtty.c
-@@ -48,21 +48,15 @@ static void sig_handler(int sig)
- /**
-  * exec_login_prog() - execute a login program
-  * @cmd:	Path to the (login) program executable
-- * @host:	Originator host that is passed to /bin/login
-  */
--static int exec_login_prog(char *cmd[], const char *host)
-+static int exec_login_prog(char *cmd[])
- {
- 	int rc;
- 
- 	if (cmd != NULL)
- 		rc = execv(cmd[0], cmd);
- 	else
--		/* for root only: write hostname to [uw]tmp if set */
--		if (geteuid() == 0 && host != NULL)
--			rc = execl("/bin/login", "/bin/login", "-h", host,
--					(char *) NULL);
--		else
--			rc = execl("/bin/login", "/bin/login", (char *) NULL);
-+		rc = execl("/bin/login", "/bin/login", (char *) NULL);
- 	return rc;
- }
- 
-@@ -110,7 +104,7 @@ static int iucvtty_worker(int client, int master, int slave,
- 			exit(2);
- 		}
- 		setenv("TERM", term_env, 1);
--		if (exec_login_prog(cfg->cmd_parms, host)) {
-+		if (exec_login_prog(cfg->cmd_parms)) {
- 			print_error("Running the login program failed");
- 			iucvtty_tx_error(client, ERR_CANNOT_EXEC_LOGIN);
- 		}
--- 
-1.7.3.5
-

0057-tunedasd-add-new-option-Q-query_reserve.patch

@@ -1,340 +0,0 @@
-From a3fd27a0ce5920b66afbf89cb83a9b61db9460c7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 28 Jan 2011 14:26:53 +0100
-Subject: [PATCH 57/61] tunedasd: add new option -Q / --query_reserve
-
-Summary:     tunedasd: add new option -Q / --query_reserve
-Description: The new option -Q / --query_reserve uses the BIODASDSNID ioctl to
-             determine the device reservation status for the given device and
-             prints it to stdout.
----
- tunedasd/include/disk.h |    1 +
- tunedasd/man/tunedasd.8 |   22 +++++++++-
- tunedasd/src/disk.c     |   65 +++++++++++++++++++++++++++++
- tunedasd/src/tunedasd.c |  104 +++++++++++++++++++++++++++--------------------
- 4 files changed, 147 insertions(+), 45 deletions(-)
-
-diff --git a/tunedasd/include/disk.h b/tunedasd/include/disk.h
-index 4b98fb0..ece8cb5 100644
---- a/tunedasd/include/disk.h
-+++ b/tunedasd/include/disk.h
-@@ -25,6 +25,7 @@ int disk_set_cache (char* device, char* cache, char* no_cyl);
- int disk_reserve (char* device);
- int disk_release (char* device);
- int disk_slock (char* device);
-+int disk_query_reserve_status(char* device);
- int disk_profile (char* device, char* prof_item);
- int disk_reset_prof (char* device);
- 
-diff --git a/tunedasd/man/tunedasd.8 b/tunedasd/man/tunedasd.8
-index 2d99bdc..a96913e 100644
---- a/tunedasd/man/tunedasd.8
-+++ b/tunedasd/man/tunedasd.8
-@@ -66,7 +66,6 @@ Enterprise Storage Servers (ESS):
- (Record Access)
- .IP "" 7
- More details about caching can be found in the 'Storage Control Reference' of the attached storage server.
--
- .TP   
- .BR "\-n" " or " "\-\-no_cyl" " <n> "
- Number of cylinders to be cached (only valid together with --cache).
-@@ -91,6 +90,27 @@ Profile info must be available and enabled
- ('echo set on > /proc/dasd/statistics') 
- in the kernel to get valid results out of the profile commands.
- .TP   
-+.BR "\-Q" " or " "\-\-query_reserve"
-+Query the current reserve status of the device.
-+The following states are defined:
-+.br
-+.IP "          \(bu" 12
-+.I none:
-+The device is not reserved.
-+.IP "          \(bu" 12
-+.I implicit:
-+The device is not reserved, but there is a contingent or implicit
-+allegiance to this Linux instance.
-+.IP "          \(bu" 12
-+.I other:
-+The device is reserved to another operating system instance.
-+.IP "          \(bu" 12
-+.I reserved:
-+The device is reserved to this Linux instance.
-+.IP "" 7
-+More details about reserve/release can be found in the 'Storage Control Reference' of the attached storage server.
-+
-+.TP
- .BR "\-I" " or " "\-\-prof_item <row> "
- Print single profile item data row (without header).
- .br
-diff --git a/tunedasd/src/disk.c b/tunedasd/src/disk.c
-index afbe851..3eaa4f3 100644
---- a/tunedasd/src/disk.c
-+++ b/tunedasd/src/disk.c
-@@ -68,6 +68,25 @@ typedef struct attrib_data_t {
- #define DASD_REC_ACCESS    0x5
- 
- /*
-+ * Data returned by Sense Path Group ID (SNID)
-+ */
-+struct dasd_snid_data {
-+	struct {
-+		__u8 group:2;
-+		__u8 reserve:2;
-+		__u8 mode:1;
-+		__u8 res:3;
-+	} __attribute__ ((packed)) path_state;
-+	__u8 pgid[11];
-+} __attribute__ ((packed));
-+
-+struct dasd_snid_ioctl_data {
-+	struct dasd_snid_data data;
-+	__u8 path_mask;
-+} __attribute__ ((packed));
-+
-+
-+/*
-  * DASD-IOCTLs (copied from dasd.h) 
-  */
- /* Issue a reserve/release command, rsp. */
-@@ -85,6 +104,9 @@ typedef struct attrib_data_t {
- /* Set Attributes (cache operations) */
- #define BIODASDSATTR   _IOW (DASD_IOCTL_LETTER,2,attrib_data_t) 
- 
-+/* Get Sense Path Group ID (SNID) data */
-+#define BIODASDSNID    _IOWR(DASD_IOCTL_LETTER, 1, struct dasd_snid_ioctl_data)
-+
- 
- /* id definition for profile items */
- enum prof_id {
-@@ -378,6 +400,49 @@ disk_slock (char* device)
- 	return 0;
- }
- 
-+
-+/*
-+ * Uses the Sense Path Group ID (SNID) ioctl to find out if
-+ * a device is reserved to it's path group.
-+ */
-+int
-+disk_query_reserve_status(char* device)
-+{
-+	int fd;
-+	struct dasd_snid_ioctl_data snid;
-+
-+	/* Open device file */
-+	fd = open (device, O_RDONLY);
-+	if (fd == -1) {
-+		error_print ("<%s> - %s", device, strerror (errno));
-+		return -1;
-+	}
-+	snid.path_mask = 0;
-+	/* Release device */
-+	if (ioctl(fd, BIODASDSNID, &snid)) {
-+		error_print("Could not read reserve status"
-+			    " for device <%s>", device);
-+		close (fd);
-+		return -1;
-+	}
-+	switch (snid.data.path_state.reserve) {
-+	case 0:
-+		printf("none\n");
-+		break;
-+	case 1:
-+		printf("implicit\n");
-+		break;
-+	case 2:
-+		printf("other\n");
-+		break;
-+	case 3:
-+		printf("reserved\n");
-+		break;
-+	}
-+	close (fd);
-+	return 0;
-+}
-+
- int 
- disk_profile_summary (dasd_profile_info_t dasd_profile_info)
- {
-diff --git a/tunedasd/src/tunedasd.c b/tunedasd/src/tunedasd.c
-index 05e0344..fbb7a1e 100644
---- a/tunedasd/src/tunedasd.c
-+++ b/tunedasd/src/tunedasd.c
-@@ -47,6 +47,7 @@ static const char* usage_text[] = {
- 	"-O, --slock              Unconditional reserve device",
- 	"                         Note: Use with care, this breaks an existing "
- 	                          "lock",
-+	"-Q, --query_reserve      Print reserve status of device ",
- 	"-P, --profile            Print profile info of device",
- 	"-I, --prof_item          Print single profile item",
- 	"                         (reqs/sects/sizes/total/totsect/start/irq/",
-@@ -54,21 +55,22 @@ static const char* usage_text[] = {
- 	"-R, --reset_prof         Reset profile info of device"
- };
- 
--#define CMD_KEYWORD_NUM		11
-+#define CMD_KEYWORD_NUM		12
- #define DEVICES_NUM		256
- 
- enum cmd_keyword_id {
--	cmd_keyword_help        =  0, 
--	cmd_keyword_version     =  1,
--	cmd_keyword_get_cache   =  2,
--	cmd_keyword_cache       =  3,
--	cmd_keyword_no_cyl      =  4,
--	cmd_keyword_reserve     =  5,
--	cmd_keyword_release     =  6,
--	cmd_keyword_slock       =  7,
--	cmd_keyword_profile     =  8, 
--	cmd_keyword_prof_item   =  9, 
--	cmd_keyword_reset_prof  = 10,
-+	cmd_keyword_help           =  0,
-+	cmd_keyword_version        =  1,
-+	cmd_keyword_get_cache      =  2,
-+	cmd_keyword_cache          =  3,
-+	cmd_keyword_no_cyl         =  4,
-+	cmd_keyword_reserve        =  5,
-+	cmd_keyword_release        =  6,
-+	cmd_keyword_slock          =  7,
-+	cmd_keyword_profile        =  8,
-+	cmd_keyword_prof_item      =  9,
-+	cmd_keyword_reset_prof     = 10,
-+	cmd_keyword_query_reserve  = 11,
- };
- 
- 
-@@ -77,17 +79,18 @@ static const struct {
- 	char* keyword;
- 	enum cmd_keyword_id id;
- } keyword_list[] = {
--	{ "help",       cmd_keyword_help },
--	{ "version",    cmd_keyword_version },
--	{ "get_cache",  cmd_keyword_get_cache },
--	{ "cache",      cmd_keyword_cache },
--	{ "no_cyl",     cmd_keyword_no_cyl },
--	{ "reserve",    cmd_keyword_reserve },
--	{ "release",    cmd_keyword_release },
--	{ "slock",      cmd_keyword_slock },
--	{ "profile",    cmd_keyword_profile },
--	{ "prof_item",  cmd_keyword_prof_item },
--	{ "reset_prof", cmd_keyword_reset_prof }
-+	{ "help",          cmd_keyword_help },
-+	{ "version",       cmd_keyword_version },
-+	{ "get_cache",     cmd_keyword_get_cache },
-+	{ "cache",         cmd_keyword_cache },
-+	{ "no_cyl",        cmd_keyword_no_cyl },
-+	{ "reserve",       cmd_keyword_reserve },
-+	{ "release",       cmd_keyword_release },
-+	{ "slock",         cmd_keyword_slock },
-+	{ "profile",       cmd_keyword_profile },
-+	{ "prof_item",     cmd_keyword_prof_item },
-+	{ "reset_prof",    cmd_keyword_reset_prof },
-+	{ "query_reserve", cmd_keyword_query_reserve }
- };	
- 
- 
-@@ -100,21 +103,22 @@ enum cmd_key_state {
- 
- /* Determines which combination of keywords are valid */
- enum cmd_key_state cmd_key_table[CMD_KEYWORD_NUM][CMD_KEYWORD_NUM] = {
--	/*		     help vers get_ cach no_c rese rele sloc prof prof rese
--	 *		          ion  cach e    yl   rve  ase  k    ile  _ite t_pr
--	 *		               	e                                  m    of             
--	 */		               	                                                       
--	/* help  	*/ { req, opt, opt, opt, opt, opt, opt, opt, opt, opt, opt },
--	/* version	*/ { inv, req, inv, inv, inv, inv, inv, inv, inv, inv, inv },
--	/* get_cache	*/ { opt, opt, req, inv, inv, inv, inv, inv, inv, inv, inv },
--	/* cache 	*/ { opt, opt, inv, req, opt, inv, inv, inv, inv, inv, inv },
--	/* no_cyl	*/ { opt, opt, inv, req, req, inv, inv, inv, inv, inv, inv },
--	/* reserve	*/ { opt, opt, inv, inv, inv, req, inv, inv, inv, inv, inv },
--	/* release	*/ { opt, opt, inv, inv, inv, inv, req, inv, inv, inv, inv },
--	/* slock 	*/ { opt, opt, inv, inv, inv, inv, inv, req, inv, inv, inv },
--	/* profile	*/ { opt, opt, inv, inv, inv, inv, inv, inv, req, opt, inv },
--	/* prof_item	*/ { opt, opt, inv, inv, inv, inv, inv, inv, req, req, inv },
--	/* reset_prof	*/ { opt, opt, inv, inv, inv, inv, inv, inv, inv, inv, req },
-+	/*		     help vers get_ cach no_c rese rele sloc prof prof rese quer
-+	 *		          ion  cach e    yl   rve  ase  k    ile  _ite t_pr y_re
-+	 *		               	e                                  m    of  serv
-+	 */
-+	/* help  	 */ { req, opt, opt, opt, opt, opt, opt, opt, opt, opt, opt, inv },
-+	/* version	 */ { inv, req, inv, inv, inv, inv, inv, inv, inv, inv, inv, inv },
-+	/* get_cache	 */ { opt, opt, req, inv, inv, inv, inv, inv, inv, inv, inv, inv },
-+	/* cache 	 */ { opt, opt, inv, req, opt, inv, inv, inv, inv, inv, inv, inv },
-+	/* no_cyl	 */ { opt, opt, inv, req, req, inv, inv, inv, inv, inv, inv, inv },
-+	/* reserve	 */ { opt, opt, inv, inv, inv, req, inv, inv, inv, inv, inv, inv },
-+	/* release	 */ { opt, opt, inv, inv, inv, inv, req, inv, inv, inv, inv, inv },
-+	/* slock 	 */ { opt, opt, inv, inv, inv, inv, inv, req, inv, inv, inv, inv },
-+	/* profile	 */ { opt, opt, inv, inv, inv, inv, inv, inv, req, opt, inv, inv },
-+	/* prof_item	 */ { opt, opt, inv, inv, inv, inv, inv, inv, req, req, inv, inv },
-+	/* reset_prof	 */ { opt, opt, inv, inv, inv, inv, inv, inv, inv, inv, req, inv },
-+	/* query_reserve */ { inv, inv, inv, inv, inv, inv, inv, inv, inv, inv, inv, req },
- };
- 
- struct parameter {
-@@ -141,11 +145,12 @@ static struct option options[] = {
- 	{ "profile",		no_argument,	        NULL, 'P'},
- 	{ "prof_item",		required_argument,      NULL, 'I'},
- 	{ "reset_prof",		no_argument,	        NULL, 'R'},
-+	{ "query_reserve",	no_argument,	        NULL, 'Q'},
- 	{ NULL,			0,			NULL, 0 }
- };
- 
- /* Command line option abbreviations */
--static const char option_string[] = "hvgc:n:SLOPI:R";
-+static const char option_string[] = "hvgc:n:SLOPI:RQ";
- 
- 
- /* Error message string */
-@@ -372,6 +377,11 @@ get_command_line (int argc, char* argv[], struct command_line* line)
- 			rc = store_option (&cmdline, cmd_keyword_reset_prof,
- 					   optarg);
- 			break;
-+		case 'Q':
-+			rc = store_option (&cmdline, cmd_keyword_query_reserve,
-+					   optarg);
-+			break;
-+
- 		case -1:
- 			/* End of options string - start of devices list */
- 			cmdline.device_id = optind;
-@@ -431,8 +441,11 @@ do_command (char* device, struct command_line cmdline)
- 		rc = disk_reset_prof (device);
- 		break;
- 	case cmd_keyword_prof_item:
--		break; 
--	default: 
-+		break;
-+	case cmd_keyword_query_reserve:
-+		rc = disk_query_reserve_status(device);
-+		break;
-+	default:
- 		error_print ("Unknown command '%s' specified",
- 			     get_keyword_name (i));
- 		break;
-@@ -449,7 +462,7 @@ int
- main (int argc, char* argv[])
- {
- 	struct command_line cmdline;
--	int rc;
-+	int rc, finalrc;
- 
- 	/* Find out what we're supposed to do */
- 	rc = get_command_line (argc, argv, &cmdline);
-@@ -484,9 +497,12 @@ main (int argc, char* argv[])
- 		return 1;
- 	}
- 
--	while (cmdline.device_id < argc) { 
-+	finalrc = 0;
-+	while (cmdline.device_id < argc) {
- 		rc = do_command (argv[cmdline.device_id], cmdline);
-+		if (rc && !finalrc)
-+			finalrc = rc;
- 		cmdline.device_id++;
- 	}
--	return 0;
-+	return finalrc;
- }
--- 
-1.7.3.5
-

0058-fdasd-dasdfmt-fix-format-7-label.patch

@@ -1,96 +0,0 @@
-From f877ca62c13e475d55f6fe3fac5c9732ed44b49e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 28 Jan 2011 14:27:39 +0100
-Subject: [PATCH 58/61] fdasd/dasdfmt: fix format 7 label
-
-Description: fdasd/dasdfmt: fix format 7 label
-Symptom:     Backups of Linux on System z disks from z/OS do not work
-		when the disk is not fully partitioned.
-Problem:     The format 7 label written by fdasd and dasdfmt is incorrect.
-		The extend for free space has one track less than required
-		which is recognized as inconsistent vtoc state by z/OS tools.
-Solution:    Fix libvtoc to write the format 7 label correctly.
----
- libvtoc/vtoc.c |   22 +++++++++++++---------
- 1 files changed, 13 insertions(+), 9 deletions(-)
-
-diff --git a/libvtoc/vtoc.c b/libvtoc/vtoc.c
-index cebd5a4..36269a4 100644
---- a/libvtoc/vtoc.c
-+++ b/libvtoc/vtoc.c
-@@ -1204,7 +1204,7 @@ void vtoc_update_format7_label_add (format7_label_t *f7, int verbose,
- 		if ((ext->a + ext->b) == 0x00000000)
- 			continue;
- 
--		if ((ext->b + 1) == tmp->a) {
-+		if ((ext->b) == tmp->a) {
- 			/* this extent precedes the new one */
- 			ext->b = tmp->b;
- 			bzero(tmp, sizeof(ds7ext_t));
-@@ -1216,7 +1216,7 @@ void vtoc_update_format7_label_add (format7_label_t *f7, int verbose,
- 			continue;
- 		} 
- 
--		if (ext->a == (tmp->b + 1))
-+		if (ext->a == (tmp->b))
- 		{
- 			/* this extent succeeds the new one */
- 			ext->a = tmp->a;
-@@ -1240,7 +1240,7 @@ void vtoc_update_format7_label_del (format7_label_t *f7, int verbose,
- {
- 	ds7ext_t *ext;
- 	int i, counter=0;
--	
-+
- 	for (i=0; i<16; i++) {
- 		if (i<5) 
- 			ext = &f7->DS7EXTNT[i]; 
-@@ -1258,7 +1258,7 @@ void vtoc_update_format7_label_del (format7_label_t *f7, int verbose,
- 
- 		if ((a == ext->a) && (b < ext->b)) {
- 			/* left-bounded in free space gap */
--			ext->a = b + 1;
-+			ext->a = b;
- 			if (verbose) 
- 				printf("FMT7 add extent: left-bounded\n");
- 			counter++;
-@@ -1267,7 +1267,7 @@ void vtoc_update_format7_label_del (format7_label_t *f7, int verbose,
- 
- 		if ((a > ext->a) && (b == ext->b)) {
- 			/* right-bounded in free space gap */
--			ext->b = a - 1;
-+			ext->b = a;
- 			if (verbose) 
- 				printf("FMT7 add extent: right-bounded\n");
- 			counter++;
-@@ -1277,8 +1277,8 @@ void vtoc_update_format7_label_del (format7_label_t *f7, int verbose,
- 		if ((a > ext->a) && (b < ext->b)) {
- 			/* partition devides free space into 2 pieces */
- 			vtoc_update_format7_label_add(f7, verbose, 
--						      b+1, ext->b);
--			ext->b = a - 1;
-+						      b, ext->b);
-+			ext->b = a;
- 			if (verbose) 
- 				printf("FMT7 add extent: 2 pieces\n");
- 			counter++;
-@@ -1311,10 +1311,14 @@ void vtoc_set_freespace(format4_label_t *f4, format5_label_t *f5,
- {
- 	if ((cyl * trk) > BIG_DISK_SIZE) {
- 		if (ch == '+') {
--			vtoc_update_format7_label_add(f7, verbose, start,stop);
-+			vtoc_update_format7_label_add(f7, verbose, start,
-+						      /* ds7ext RTA + 1 */
-+						      stop + 1);
- 		}
- 		else if (ch == '-') {
--			vtoc_update_format7_label_del(f7, verbose, start,stop);
-+			vtoc_update_format7_label_del(f7, verbose, start,
-+						      /* ds7ext RTA + 1 */
-+						      stop + 1);
- 		}
- 		else {
- 			printf("BUG: syntax error in vtoc_set_freespace.\n");
--- 
-1.7.3.5
-

0059-cpuplugd-cmm_pages-not-set-and-restored-correctly.patch

@@ -1,69 +0,0 @@
-From f127d0df43f5fe5709f068e0c79bef0b759cb6fe Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 28 Jan 2011 14:28:35 +0100
-Subject: [PATCH 59/61] cpuplugd: cmm_pages not set and restored correctly
-
-Description: cpuplugd: cmm_pages not set and restored correctly
-Symptom:     /proc/sys/vm/cmm_pages will be restored to 0 after program exit,
-		regardless of previous value, if cpuplugd is run with an invalid
-		memory  configuration, e.g. cmm_min commented out. Also, cmm_pages
-		will not correctly reach a cmm_min of 0 during run-time, in a case
-		where cmm_pages is equal to cmm_inc.
-Problem:     Incorrect checks on program exit, and in the memplug function.
-Solution:    Fix checks on program exit and memplug.
----
- cpuplugd/config.c |    1 +
- cpuplugd/daemon.c |    4 ++--
- cpuplugd/mem.c    |    2 +-
- 3 files changed, 4 insertions(+), 3 deletions(-)
-
-diff --git a/cpuplugd/config.c b/cpuplugd/config.c
-index e853ea7..bda7780 100644
---- a/cpuplugd/config.c
-+++ b/cpuplugd/config.c
-@@ -358,6 +358,7 @@ void check_config(struct config *cfg)
- 		if (foreground == 0)
- 			syslog(LOG_INFO, "No valid memory hotplug "
- 				"configuration detected\n");
-+		memory = 0;
- 	} else {
- 		memory = 1;
- 		/*
-diff --git a/cpuplugd/daemon.c b/cpuplugd/daemon.c
-index 391acba..4dab372 100644
---- a/cpuplugd/daemon.c
-+++ b/cpuplugd/daemon.c
-@@ -125,7 +125,7 @@ void clean_up()
- 		syslog(LOG_INFO, "terminated\n");
- 	remove(pid_file);
- 	reactivate_cpus();
--	if (check_cmmfiles() == 0)
-+	if (memory)
- 		cleanup_cmm();
- 	exit(1);
- }
-@@ -139,7 +139,7 @@ void kill_daemon(int a)
- 		syslog(LOG_INFO, "shutting down\n");
- 	remove(pid_file);
- 	reactivate_cpus();
--	if (check_cmmfiles() == 0)
-+	if (memory)
- 		cleanup_cmm();
- 	exit(0);
- }
-diff --git a/cpuplugd/mem.c b/cpuplugd/mem.c
-index 13f902d..b15c7e2 100644
---- a/cpuplugd/mem.c
-+++ b/cpuplugd/mem.c
-@@ -163,7 +163,7 @@ int memplug(int size)
- 	 * new value: previous value - size
- 	 */
- 	new_size = old_size - size;
--	if (new_size <= 0)
-+	if (new_size < 0)
- 		return -1;
- 	filp = fopen("/proc/sys/vm/cmm_pages", "w");
- 	if (!filp) {
--- 
-1.7.3.5
-

0060-lsluns-Fix-LUN-reporting-for-SAN-volume-controller-S.patch

@@ -1,69 +0,0 @@
-From bdc3b89850bb437f48cb2f9fa31a8f51d3cd88b5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 28 Jan 2011 14:30:22 +0100
-Subject: [PATCH 60/61] lsluns: Fix LUN reporting for SAN volume controller (SVC)
-
-Description: lsluns: Fix LUN reporting for SAN volume controller (SVC)
-Symptom:     lsluns fails to report LUNs from SVC
-Problem:     The SCSI Architecture Model (SAM) specifies that a storage
-		server only has to support the REPORT LUNs command for LUN 0
-		or the "REPORT LUNS Well-Known-LUN" (WLUN). The SAN Volume
-		Controller (SVC) only supports REPORT LUNS on LUN 0. The
-		approach of lsluns of sending the REPORT LUNS to any attached
-		LUN does not work for the SVC.
-Solution:    Change the strategy of lsluns to check if the LUN 0 or the
-		WLUN is already available. If both LUNs are not available,
-		first try to attach LUN 0 and issue the command; if this
-		fails, try the WLUN.
----
- zconf/lsluns |   14 +++++++++-----
- 1 files changed, 9 insertions(+), 5 deletions(-)
-
-diff --git a/zconf/lsluns b/zconf/lsluns
-index 769b846..acbdcd7 100755
---- a/zconf/lsluns
-+++ b/zconf/lsluns
-@@ -45,16 +45,16 @@ sub list_luns
-                 next;
-             }
-             if (!defined($lun_hash{$a}{$p})) {
--                `echo $wlun >> $drv_dir/$a/$p/unit_add 2>/dev/null`;
-+                `echo $lun0 >> $drv_dir/$a/$p/unit_add 2>/dev/null`;
-                 select(undef, undef, undef, 0.1);
-                 %lun_hash = get_lun_hash();
-                 if (!defined($lun_hash{$a}{$p})) {
--                    `echo $wlun >> $drv_dir/$a/$p/unit_remove 2>/dev/null`;
--                    `echo $lun0 >> $drv_dir/$a/$p/unit_add 2>/dev/null`;
-+                    `echo $lun0 >> $drv_dir/$a/$p/unit_remove 2>/dev/null`;
-+                    `echo $wlun >> $drv_dir/$a/$p/unit_add 2>/dev/null`;
-                     select(undef, undef, undef, 0.1);
- 		    %lun_hash = get_lun_hash();
-                     if (!defined($lun_hash{$a}{$p})) {
--                    	`echo $lun0 >> $drv_dir/$a/$p/unit_remove 2>/dev/null`;
-+                    	`echo $wlun >> $drv_dir/$a/$p/unit_remove 2>/dev/null`;
-                     	print"\tat port $p:\n";
-                     	print "\t\tCannot attach WLUN / LUN0 for scanning.\n";
-                     	next;
-@@ -92,6 +92,8 @@ sub list_luns
-     }
- }
- 
-+# Look only for LUN0 and the REPORT LUNs WLUN. SAM specifies that the storage
-+# only has to response on one of those to the REPORT LUNs command.
- sub get_lun_hash
- {
-     my %lun_hash;
-@@ -105,7 +107,9 @@ sub get_lun_hash
-         $p =~ s/(0x\w{16})*\n/$1/;
-         chomp($a);
- 
--        $lun_hash{$a}{$p}{$l} = ${[split('/', $device)]}[-1];
-+        if ($l eq $lun0 or $l eq $wlun) {
-+            $lun_hash{$a}{$p}{$l} = ${[split('/', $device)]}[-1];
-+	}
-     }
-     return %lun_hash;
- }
--- 
-1.7.3.5
-

0061-lsluns-Accept-uppercase-and-lowercase-hex-digits.patch

@@ -1,39 +0,0 @@
-From 7fd37ae55c104cf62f8d62da79d89a4c59087a6d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 28 Jan 2011 14:31:06 +0100
-Subject: [PATCH 61/61] lsluns: Accept uppercase and lowercase hex digits
-
-Description: lsluns: Accept uppercase and lowercase hex digits
-Symptom:     lsluns does not accept uppercase letters in hex-digits for
-		FCP device id and WWPN.
-Problem:     lsluns compares the FCP device id and the WWPN with the
-		sysfs entries that are always lowercase.
-Solution:    Convert the input from the command line to lowercase, so
-		that lsluns accepts both, uppercase and lowercase for the
-		hex digits in the FCP device and the WWPN.
----
- zconf/lsluns |    7 +++++++
- 1 files changed, 7 insertions(+), 0 deletions(-)
-
-diff --git a/zconf/lsluns b/zconf/lsluns
-index acbdcd7..436ea34 100755
---- a/zconf/lsluns
-+++ b/zconf/lsluns
-@@ -252,7 +252,14 @@ GetOptions('c|ccw=s' => \@adapter,
-            };
- 
- @adapter = split(',', join(',', @adapter));
-+foreach (@adapter) {
-+	$_ =~ tr/A-Z/a-z/;
-+}
-+
- @port = split(',', join(',', @port));
-+foreach (@port) {
-+	$_ =~ tr/A-Z/a-z/;
-+}
- 
- %res_hash = get_env_list(\@adapter, \@port);
- 
--- 
-1.7.3.5
-

0062-dumpconf-Add-DELAY_MINUTES-description-to-man-page.patch

@@ -1,225 +0,0 @@
-From 9e35e49ec56880c9f62cce2ff79849e1e409bc2b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Mon, 14 Feb 2011 11:03:03 +0100
-Subject: [PATCH] dumpconf: Add DELAY_MINUTES description to man page
-
-Description: dumpconf: Add DELAY_MINUTES description to man page
-Symptom: User has no online documentation for the DELAY_MINUTES keyword.
-Problem: Description of the DELAY_MINUTES keyword is missing in dumpconf
-		man page.
-Solution: Add description of DELAY_MINUTES keyword to dumpconf man page.
-		Also add some minor man page cleanups from upstream version.
----
- man/dumpconf.8 |  104 +++++++++++++++++++++++--------------------------------
- 1 files changed, 44 insertions(+), 60 deletions(-)
-
-diff --git a/man/dumpconf.8 b/man/dumpconf.8
-index b8dcd00..c795568 100644
---- a/man/dumpconf.8
-+++ b/man/dumpconf.8
-@@ -1,7 +1,7 @@
--.TH DUMPCONF 8 "Nov 2006" "s390-tools"
-+.TH DUMPCONF 8 "Nov 2009" "s390-tools"
- 
- .SH NAME
--dumpconf \- Configure automatic dump for Linux on z/Series.
-+dumpconf \- Configure an ON_PANIC action for Linux on System z.
- 
- .SH SYNOPSIS
- .br
-@@ -10,8 +10,8 @@ dumpconf \- Configure automatic dump for Linux on z/Series.
- \fBdumpconf\fR [-h|-v]
- 
- .SH DESCRIPTION
--\fBdumpconf\fR reads /etc/sysconfig/dumpconf and initializes the automatic dump
--feature according to the configuration file.
-+\fBdumpconf\fR reads the /etc/sysconfig/dumpconf file
-+and establishes the action to be taken in case a kernel panic occurs.
- 
- The following keywords can be used in the dumpconf file:
- 
-@@ -20,21 +20,22 @@ The following keywords can be used in the dumpconf file:
- Shutdown action in case of a kernel panic. Possible values are 'dump', 'reipl', 'dump_reipl', 'stop' and 'vmcmd':
- .br
- 
--dump: trigger dump according to configuration in /etc/sysconfig/dumpconf.
-+dump: trigger dump according to the configuration in /etc/sysconfig/dumpconf.
- .br
- 
--reipl: trigger re-IPL according to configuration under /sys/firmware/reipl.
-+reipl: trigger re-IPL according to the configuration under /sys/firmware/reipl.
- .br
- 
--dump_reipl: first trigger dump according to configuration in
--/etc/sysconfig/dumpconf, then trigger re-IPL according to configuration under
--/sys/firmware/reipl.
-+dump_reipl: first trigger dump according to the configuration in
-+/etc/sysconfig/dumpconf, then trigger re-IPL according to the configuration
-+under /sys/firmware/reipl.
- .br
- 
- stop: stop Linux and enter disabled wait (default).
- .br
- 
--vmcmd: trigger vm command according to 'VMCMD_X' configuration in /etc/sysconfig/dumpconf.
-+vmcmd: trigger CP command according to the 'VMCMD_X' configuration in
-+/etc/sysconfig/dumpconf.
- 
- .TP
- \fB  - DUMP_TYPE:\fR
-@@ -46,15 +47,15 @@ Device number of dump device.
- 
- .TP
- \fB  - WWPN\fR
--WWPN for scsi dump device.
-+WWPN for SCSI dump device.
- 
- .TP
- \fB  - LUN\fR
--LUN for scsi dump device.
-+LUN for SCSI dump device.
- 
- .TP
- \fB  - BOOTPROG:\fR
--Boot program selector
-+Boot program selector.
- 
- .TP
- \fB  - BR_LBA:\fR
-@@ -64,46 +65,25 @@ Boot record logical block address.
- \fB  - VMCMD_1, VMCMD_2 ... VMCMD_5:\fR
- Up to five CP commands, which are triggered in case of a kernel panic.
- 
--.SH Reboot loop considerations
--
--If you select the shutdown actions "reipl" or "dump_reipl", in rare cases a
--"reboot loop" can occur, if the Linux kernel crashes everytime after the
--reboot. If you want to prevent that scenario, one of the following two
--approaches can be taken:
--
--1. Manual activation of dumpconf
--
--Ensure that the dumpconf service is not active by default:
--.br
--# chkconfig --del dumpconf
--
--Start dumpconf service manually:
--.br
--# service dumpconf start
--
--When your Linux system crashes, the system will be rebooted (after creating
--a dump in case of dump_reipl). Because the dumpconf script will then not be
--activated automatically, a second crash will stop the system.
--
--2. Automatic delayed activation of dumpconf
--
--Ensure that the dumpconf service is not active by default:
--.br
--# chkconfig --del dumpconf
--
--To enable delayed activation one of the following methods can be used:
--  a) Use a init script (e.g. /etc/rc.d/boot.local):
--     (sleep 10m; /sbin/service dumpconf start) &
--
--  b) Use a init script (e.g. /etc/rc.d/boot.local) together with "at":
--     echo 'echo /sbin/service dumpconf start' |at now+10min
--
--  c) Use the following crontab entry:
--     @reboot sleep 10m && /sbin/service dumpconf start
--
--In these examples, when your Linux system crashes within 10 minutes after
--the reboot, the dumpconf script is not active and a second crash will stop
--the system.
-+.TP
-+\fB - DELAY_MINUTES:\fR
-+Number of minutes the activation of dumpconf is to be delayed. If this keyword
-+is omitted, the default is zero, which means that
-+dumpconf activates immediately during system startup.
-+Specify a non-zero delay time only if you specified
-+shutdown action "reipl" or "dump_reipl".
-+These actions might cause a reboot loop
-+if the Linux kernel crashes persistently during (or shortly after) each reboot.
-+
-+A non-zero delay time causes dumpconf to sleep in the background until the
-+delay time has expired. In this case messages are written to /var/log/messages.
-+By default (DELAY_MINUTES is omitted or zero) dumpconf runs in the foreground
-+and informational messages are written to sysout, while
-+error messages are written to syserr.
-+
-+Example: If you specified DELAY_MINUTES=10 and
-+your Linux system crashes within 10 minutes after the reboot,
-+then dumpconf is not yet active and the default action (stop) is triggered.
- 
- .SH COMMANDS
- .TP
-@@ -128,12 +108,12 @@ Print usage information, then exit.
- Print version information, then exit.
- 
- .SH EXAMPLES:
--The following are examples for /etc/sysconfig/dumpconf:
-+The following are examples of the /etc/sysconfig/dumpconf file:
- .br
- 
- #
- .br
--# Example config for CCW dump device (DASD)
-+# Example configuration for a CCW dump device (DASD)
- .br
- #
- .br
-@@ -141,12 +121,14 @@ ON_PANIC=dump_reipl
- .br
- DUMP_TYPE=ccw
- .br
--DEVICE=0.0.4714
-+DEVICE=0.0.1234
-+.br
-+DELAY_MINUTES=5
- .br
- 
- #
- .br
--# Example config for FCP dump device (SCSI Disk)
-+# Example configuration for an FCP dump device (SCSI Disk)
- .br
- #
- .br
-@@ -154,7 +136,7 @@ ON_PANIC=dump
- .br
- DUMP_TYPE=fcp
- .br
--DEVICE=0.0.4711
-+DEVICE=0.0.2345
- .br
- WWPN=0x5005076303004712
- .br
-@@ -167,7 +149,7 @@ BR_LBA=0
- 
- #
- .br
--# Example config for vm command on panic
-+# Example configuration for CP commands on panic
- .br
- #
- .br
-@@ -177,7 +159,7 @@ VMCMD_1="MESSAGE * Starting VMDUMP"
- .br
- VMCMD_2="VMDUMP"
- .br
--VMCMD_3="IPL 4711"
-+VMCMD_3="IPL 3456"
- 
- #
- .br
-@@ -186,6 +168,8 @@ VMCMD_3="IPL 4711"
- #
- .br
- ON_PANIC=reipl
-+.br
-+DELAY_MINUTES=5
- 
- .SH SEE ALSO
- Linux on zSeries: Using the Dump Tools
--- 
-1.7.4
-

0063-cmsfs-fuse-fix-read-and-write-errors-in-text-mode.patch

@@ -1,164 +0,0 @@
-From c55983415ae3bd360deb04ede20bc482bd2c41b7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Mon, 7 Mar 2011 15:13:45 +0100
-Subject: [PATCH] cmsfs-fuse: fix read and write errors in text mode
-
-Description: cmsfs-fuse: fix read and write errors in text mode.
-Symptom:     Copying a file in text mode fails with read or write errors.
-Problem:     Miscalculation of file size in text mode and off-by-one error
-             in record length check for fixed files.
-Solution:    Correct the calculation of the file size by using the displacement
-             value for the last block of a variable file and by limiting
-             the size of the last record of a fixed file to the actual size.
-             Additionally scan for the correct length of a fixed record in text
-             mode.
-Problem-ID:  70230
----
- cmsfs-fuse/cmsfs-fuse.c |   67 ++++++++++++++++++++++++++---------------------
- cmsfs-fuse/dasd.c       |    2 +-
- 2 files changed, 38 insertions(+), 31 deletions(-)
-
-diff --git a/cmsfs-fuse/cmsfs-fuse.c b/cmsfs-fuse/cmsfs-fuse.c
-index 6c5b0b5..fd87774 100644
---- a/cmsfs-fuse/cmsfs-fuse.c
-+++ b/cmsfs-fuse/cmsfs-fuse.c
-@@ -917,6 +917,33 @@ static void set_record_extension(struct file *f, int *record, off_t addr,
- 	f->record_scan_state = RSS_DATA_BLOCK_EXT;
- }
- 
-+/* check for file end via byte count and return count of bytes left */
-+static size_t crop_file_end(struct file *f, int record, size_t done,
-+			    int first)
-+{
-+	size_t filesize = f->fst->nr_records * f->fst->record_len;
-+	struct record *rec = &f->rlist[record];
-+	struct record_ext *rext = rec->ext;
-+
-+	/* done already includes the complete record length incl. extensions */
-+	done -= rec->total_len;
-+	/* remove possible linefeeds before comparing with on-disk file size */
-+	if (f->linefeed && record)
-+		done -= record;
-+	done += rec->first_block_len;
-+
-+	/* add length of all existing extensions */
-+	while (rext != NULL) {
-+		done += rext->len;
-+		rext = rext->next;
-+	}
-+
-+	if (done + first > filesize)
-+		first = filesize - done;
-+	return first;
-+}
-+
-+/* check for file end by record number */
- static int end_of_file(struct file *f, int record)
- {
- 	if (record == f->fst->nr_records)
-@@ -936,6 +963,8 @@ static void walk_fixed_data_block(struct file *f, off_t addr, int *record,
- 
- 	if (first) {
- 		BUG(first > left);
-+
-+		first = crop_file_end(f, *record, *total, first);
- 		set_record_extension(f, record, addr, first, block);
- 		left -= first;
- 		if (addr != NULL_BLOCK)
-@@ -1572,28 +1601,6 @@ static ssize_t get_file_size_fixed(struct fst_entry *fst)
- 	return fst->nr_records * fst->record_len;
- }
- 
--static ssize_t get_file_size_variable_slow(struct fst_entry *fst)
--{
--	struct record *rec;
--	ssize_t total = 0;
--	int rc = 0;
--	struct file *f = create_file_object(fst, &rc);
--
--	if (f == NULL)
--		return rc;
--
--	rec = get_record(f, f->fst->nr_records - 1);
--	total = rec->file_start + rec->total_len;
--
--	/*
--	 * Note: need to add header bytes since the record information does
--	 * not contain them but get_file_size_logical will remove them...
--	 */
--	total += f->fst->nr_records * VAR_RECORD_HEADER_SIZE;
--	destroy_file_object(f);
--	return total;
--}
--
- static ssize_t get_file_size_variable(struct fst_entry *fst)
- {
- 	struct var_ptr vptr;
-@@ -1608,11 +1615,11 @@ static ssize_t get_file_size_variable(struct fst_entry *fst)
- 			return rc;
- 		if (vptr.next == 0) {
- 			/*
--			 * Last block is a null block. Cannot scan that block,
--			 * need to scan the whole file instead...
-+			 * Last block is a null block. No more records can
-+			 * follow, so the displacement value points to EOF.
- 			 */
--			total = get_file_size_variable_slow(fst);
--			goto skip;
-+			total = vptr.disp;
-+			goto skip_scan;
- 		}
- 		ptr = ABS(vptr.next);
- 		if (vptr.disp != VAR_RECORD_SPANNED) {
-@@ -1638,7 +1645,6 @@ skip_scan:
- 	 */
- 	if (fst->nr_blocks)
- 		total += (fst->nr_blocks - 1) * cmsfs.blksize;
--skip:
- 	return total;
- }
- 
-@@ -3896,7 +3902,8 @@ static int do_write(struct file *f, const char *buf, size_t size, off_t offset)
- 			return rc;
- 		f->ptr_dirty = 0;
- 	} else
--		if (f->fst->levels > 0) {
-+		if (f->fst->levels > 0 &&
-+		    f->fst->record_format == RECORD_LEN_VARIABLE) {
- 			rc = update_last_block_vptr(f, ABS(f->fst->fop),
- 						    f->fst->levels, &vptr);
- 			if (rc < 0)
-@@ -3962,7 +3969,7 @@ static int cmsfs_write(const char *path, const char *buf, size_t size,
- 		return do_write(f, buf, size, offset);
- 
- 	/* remove already comitted bytes */
--	offset -= f->wcache_used;
-+	offset -= f->wcache_commited;
- 
- 	/* write offset must be at the end of the file */
- 	if (offset + f->null_records + f->pad_bytes != f->session_size)
-@@ -3981,7 +3988,7 @@ static int cmsfs_write(const char *path, const char *buf, size_t size,
- 			return -EINVAL;
- 		} else {
- 			if (f->fst->record_format == RECORD_LEN_FIXED &&
--			    f->wcache_commited + scan_len >= f->fst->record_len) {
-+			    f->wcache_commited + scan_len > f->fst->record_len) {
- 				purge_wcache(f);
- 				return -EINVAL;
- 			}
-diff --git a/cmsfs-fuse/dasd.c b/cmsfs-fuse/dasd.c
-index d79d34d..1b9af9a 100644
---- a/cmsfs-fuse/dasd.c
-+++ b/cmsfs-fuse/dasd.c
-@@ -196,7 +196,7 @@ int get_device_info(struct cmsfs *cmsfs)
- 	 */
- 	fd = open(cmsfs->device, O_RDWR);
- 	if (fd < 0) {
--		if (errno == EROFS) {
-+		if (errno == EROFS || errno == EACCES) {
- 			cmsfs->readonly = 1;
- 			fd = open(cmsfs->device, O_RDONLY);
- 			if (fd < 0)
--- 
-1.7.4
-

0064-switch-to-using-udevadm-settle.patch

@@ -1,25 +0,0 @@
-From c4a38de57376a6ddf03906afeac142525837aab0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 18 Mar 2011 16:35:17 +0100
-Subject: [PATCH 64/66] switch to using udevadm settle
-
----
- etc/init.d/mon_statd |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/etc/init.d/mon_statd b/etc/init.d/mon_statd
-index 60bcf00..b6699c7 100755
---- a/etc/init.d/mon_statd
-+++ b/etc/init.d/mon_statd
-@@ -39,7 +39,7 @@ load_kernel_module()
- 		if [ $? -ne 0 ]; then
- 			exit 1
- 		fi
--		udevsettle
-+		udevadm settle
- 		if [ $? -ne 0 ]; then
- 			exit 1
- 		fi
--- 
-1.7.4
-

0065-hyptop-Fix-man-page-typo-for-current-weight.patch

@@ -1,30 +0,0 @@
-From 983f8cd4337de2ca5377ed64121c55d27367beca Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 18 Mar 2011 16:37:15 +0100
-Subject: [PATCH 65/66] hyptop: Fix man page typo for "current weight"
-
-Description: hyptop: Fix man page typo for "current weight"
-Symptom:     The hyptop man page says that the 't' character is used for
-             "current weight" under z/VM.
-Problem:     The correct character for "current weight" is 'r'.
-Solution:    Document the correct character 'r' for "current weight".
----
- hyptop/hyptop.8 |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/hyptop/hyptop.8 b/hyptop/hyptop.8
-index 99a729c..325613b 100644
---- a/hyptop/hyptop.8
-+++ b/hyptop/hyptop.8
-@@ -127,7 +127,7 @@ The following fields are available under z/VM:
-   'u' - Used memory
-   'a' - Maximum memory
-   'n' - Minimum weight
--  't' - Current weight
-+  'r' - Current weight
-   'x' - Maximum weight
- 
-   In "sys" window:
--- 
-1.7.4
-

0066-fdasd-buffer-overflow-when-writing-to-read-only-devi.patch

@@ -1,61 +0,0 @@
-From f5a80bd5d3d478354d6044b6d2b9951fd29a8d59 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 18 Mar 2011 16:37:54 +0100
-Subject: [PATCH 66/66] fdasd: buffer overflow when writing to read-only device
-
-Description: fdasd: buffer overflow when writing to read-only device
-Symptom:     When fdasd tries to write to a read-only disk, it fails with
-             a '*** buffer overflow detected ***' error message.
-Problem:     It is expected that fdasd cannot write to a read-only disk, and
-             such an operation should end with a proper error message. The
-             libvtoc code, which writes this message, contains the bug that
-             causes the buffer overflow.
-Solution:    Directly print the error message, without formatting it first in
-             a buffer.
----
- libvtoc/vtoc.c |   15 +++++----------
- 1 files changed, 5 insertions(+), 10 deletions(-)
-
-diff --git a/libvtoc/vtoc.c b/libvtoc/vtoc.c
-index 36269a4..ae1de8c 100644
---- a/libvtoc/vtoc.c
-+++ b/libvtoc/vtoc.c
-@@ -146,30 +146,25 @@ static char buffer[85];
-  */
- static void vtoc_error(enum failure why, char *s1, char *s2) 
- {
--        char    error[LINE_LENGTH];
--
- 	switch (why) {
- 	case unable_to_open:
--	        sprintf(error, "%s opening device '%s' failed.\n%s\n",
-+	        fprintf(stderr, "\n%s opening device '%s' failed.\n%s\n",
- 			VTOC_ERROR, s1, s2);
- 		break;
- 	case unable_to_seek:
--	        sprintf(error, "%s seeking device '%s' failed.\n%s\n",
-+	        fprintf(stderr, "\n%s seeking device '%s' failed.\n%s\n",
- 			VTOC_ERROR, s1, s2);
- 		break;
- 	case unable_to_write:
--	        sprintf(error, "%s writing to device '%s' failed,\n%s\n",
-+	        fprintf(stderr, "\n%s writing to device '%s' failed,\n%s\n",
- 			VTOC_ERROR, s1, s2);
- 		break;
- 	case unable_to_read:
--	        sprintf(error, "%s reading from device '%s' failed.\n%s\n",
-+	        fprintf(stderr, "\n%s reading from device '%s' failed.\n%s\n",
- 			VTOC_ERROR, s1, s2);
- 		break;
--	default: sprintf(error, "Fatal error\n");
-+	default: fprintf(stderr, "\nFatal error\n");
- 	}
--
--	fputc('\n', stderr);
--	fputs(error, stderr);
- 	exit(1);
- }
- 
--- 
-1.7.4
-

0067-cmsfs-fuse-Delete-old-file-if-renaming-to-an-existin.patch

@@ -1,297 +0,0 @@
-From f6494a1210439d591a1319498026ffcdd91a2ebf Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 29 Mar 2011 10:49:25 +0200
-Subject: [PATCH 67/70] cmsfs-fuse: Delete old file if renaming to an existing file
-
-Description: cmsfs-fuse: Delete old file if renaming to an existing file.
-Symptom:     Stale old file if renaming a file to an existing file.
-Problem:     In case rename is used to overwrite an existing file the old
-             file entry was not deleted resulting in a duplicated file.
-Solution:    If the target of a rename operation exists delete the target
-             file before the rename operation.
----
- cmsfs-fuse/cmsfs-fuse.c |  248 ++++++++++++++++++++++++-----------------------
- 1 files changed, 128 insertions(+), 120 deletions(-)
-
-diff --git a/cmsfs-fuse/cmsfs-fuse.c b/cmsfs-fuse/cmsfs-fuse.c
-index fd87774..9f1aa1a 100644
---- a/cmsfs-fuse/cmsfs-fuse.c
-+++ b/cmsfs-fuse/cmsfs-fuse.c
-@@ -2638,14 +2638,132 @@ static int cmsfs_utimens(const char *path, const struct timespec ts[2])
- 	return 0;
- }
- 
-+/*
-+ * Get the address of the last directory entry.
-+ */
-+off_t find_last_fdir_entry(off_t addr, int level)
-+{
-+	struct fst_entry fst;
-+	int left, rc;
-+	off_t ptr;
-+
-+	if (level > 0) {
-+		level--;
-+		left = PTRS_PER_BLOCK;
-+		while (left--) {
-+			ptr = get_fixed_pointer(addr + left * PTR_SIZE);
-+			BUG(ptr < 0);
-+			if (ptr)
-+				return find_last_fdir_entry(ptr, level);
-+		}
-+		DIE("Directory entry not found\n");
-+		return 0;
-+	}
-+
-+	left = cmsfs.blksize / sizeof(struct fst_entry);
-+	while (left--) {
-+		rc = _read(&fst, sizeof(fst),
-+			   addr + left * sizeof(struct fst_entry));
-+		BUG(rc < 0);
-+		if (is_file((unsigned long long *) fst.name,
-+			    (unsigned long long *) fst.type))
-+			return addr + left * sizeof(struct fst_entry);
-+	}
-+	DIE("Directory entry not found\n");
-+}
-+
-+static int delete_file(const char *path)
-+{
-+	off_t fst_kill, fst_last;
-+	struct walk_file walk;
-+	struct file *f_moved;
-+	char file[MAX_FNAME];
-+	struct fst_entry fst;
-+	struct file *f;
-+	int rc = 0, i;
-+
-+	if (cmsfs.readonly)
-+		return -EROFS;
-+
-+	fst_kill = lookup_file(path + 1, &fst, SHOW_UNLINKED);
-+	if (!fst_kill)
-+		return -ENOENT;
-+	f = create_file_object(&fst, &rc);
-+	if (f == NULL)
-+		return rc;
-+
-+	/* delete all data blocks */
-+	for (i = 0; i < f->fst->nr_blocks; i++)
-+		free_block(f->blist[i].disk_addr);
-+
-+	if (f->fst->fop) {
-+		rc = f->fops->delete_pointers(f, f->fst->levels, ABS(f->fst->fop));
-+		if (rc < 0)
-+			goto error;
-+	}
-+
-+	if (cmsfs.dir_levels)
-+		fst_last = find_last_fdir_entry(get_fop(cmsfs.fdir), cmsfs.dir_levels);
-+	else
-+		fst_last = find_last_fdir_entry(cmsfs.fdir, cmsfs.dir_levels);
-+
-+	/* remove unlinked file from fcache */
-+	strncpy(file, path + 1, MAX_FNAME);
-+	str_toupper(file);
-+	invalidate_htab_entry(file);
-+
-+	if (fst_last == fst_kill)
-+		goto skip_copy;
-+
-+	/* copy last entry over unlinked entry */
-+	rc = _read(&fst, sizeof(struct fst_entry), fst_last);
-+	BUG(rc < 0);
-+	rc = _write(&fst, sizeof(struct fst_entry), fst_kill);
-+	BUG(rc < 0);
-+
-+	/* update moved fcache entry */
-+	memset(file, 0, sizeof(file));
-+	decode_edf_name(file, fst.name, fst.type);
-+	update_htab_entry(fst_kill, file);
-+	/* update cached address of moved FST */
-+	f_moved = file_open(file);
-+	if (f_moved != NULL)
-+		f->fst_addr = fst_kill;
-+
-+skip_copy:
-+	/* delete last entry */
-+	rc = _zero(fst_last, sizeof(struct fst_entry));
-+	BUG(rc < 0);
-+
-+	/* if the deleted entry was the first of a block, free the block */
-+	if (fst_last % cmsfs.blksize == 0) {
-+		cache_dblocks(&walk);
-+		/* delete the last block from dlist */
-+		walk.dlist_used--;
-+		free_block(fst_last);
-+		purge_dblock_ptrs(cmsfs.dir_levels, get_fop(cmsfs.fdir));
-+		rewrite_dblock_ptrs(&walk);
-+		free_dblocks(&walk);
-+	}
-+
-+	destroy_file_object(f);
-+	decrease_file_count();
-+	update_block_count();
-+	return 0;
-+
-+error:
-+	destroy_file_object(f);
-+	return rc;
-+}
-+
- static int cmsfs_rename(const char *path, const char *new_path)
- {
-+	struct fst_entry fst, fst_new;
-+	off_t fst_addr, fst_addr_new;
- 	char uc_old_name[MAX_FNAME];
- 	char fname[8], ftype[8];
--	struct fst_entry fst;
- 	char *uc_new_name;
- 	struct file *f;
--	off_t fst_addr;
- 	int rc;
- 
- 	if (cmsfs.readonly)
-@@ -2655,6 +2773,14 @@ static int cmsfs_rename(const char *path, const char *new_path)
- 	if (!fst_addr)
- 		return -ENOENT;
- 
-+	/* if new file already exists it must be overwritten so delete it */
-+	fst_addr_new = lookup_file(new_path + 1, &fst_new, HIDE_UNLINKED);
-+	if (fst_addr_new) {
-+		delete_file(new_path);
-+		/* fst_addr may have changed due to copy-up */
-+		fst_addr = lookup_file(path + 1, &fst, HIDE_UNLINKED);
-+	}
-+
- 	rc = edf_name_valid(new_path + 1);
- 	if (rc)
- 		return rc;
-@@ -4042,124 +4168,6 @@ static int cmsfs_write(const char *path, const char *buf, size_t size,
- 	return rc;
- }
- 
--/*
-- * Get the address of the last directory entry.
-- */
--off_t find_last_fdir_entry(off_t addr, int level)
--{
--	struct fst_entry fst;
--	int left, rc;
--	off_t ptr;
--
--	if (level > 0) {
--		level--;
--		left = PTRS_PER_BLOCK;
--		while (left--) {
--			ptr = get_fixed_pointer(addr + left * PTR_SIZE);
--			BUG(ptr < 0);
--			if (ptr)
--				return find_last_fdir_entry(ptr, level);
--		}
--		DIE("Directory entry not found\n");
--		return 0;
--	}
--
--	left = cmsfs.blksize / sizeof(struct fst_entry);
--	while (left--) {
--		rc = _read(&fst, sizeof(fst),
--			   addr + left * sizeof(struct fst_entry));
--		BUG(rc < 0);
--		if (is_file((unsigned long long *) fst.name,
--			    (unsigned long long *) fst.type))
--			return addr + left * sizeof(struct fst_entry);
--	}
--	DIE("Directory entry not found\n");
--}
--
--static int delete_file(const char *path)
--{
--	off_t fst_kill, fst_last;
--	struct walk_file walk;
--	struct file *f_moved;
--	char file[MAX_FNAME];
--	struct fst_entry fst;
--	struct file *f;
--	int rc = 0, i;
--
--	if (cmsfs.readonly)
--		return -EROFS;
--
--	fst_kill = lookup_file(path + 1, &fst, SHOW_UNLINKED);
--	if (!fst_kill)
--		return -ENOENT;
--	f = create_file_object(&fst, &rc);
--	if (f == NULL)
--		return rc;
--
--	/* delete all data blocks */
--	for (i = 0; i < f->fst->nr_blocks; i++)
--		free_block(f->blist[i].disk_addr);
--
--	if (f->fst->fop) {
--		rc = f->fops->delete_pointers(f, f->fst->levels, ABS(f->fst->fop));
--		if (rc < 0)
--			goto error;
--	}
--
--	if (cmsfs.dir_levels)
--		fst_last = find_last_fdir_entry(get_fop(cmsfs.fdir), cmsfs.dir_levels);
--	else
--		fst_last = find_last_fdir_entry(cmsfs.fdir, cmsfs.dir_levels);
--
--	/* remove unlinked file from fcache */
--	strncpy(file, path + 1, MAX_FNAME);
--	str_toupper(file);
--	invalidate_htab_entry(file);
--
--	if (fst_last == fst_kill)
--		goto skip_copy;
--
--	/* copy last entry over unlinked entry */
--	rc = _read(&fst, sizeof(struct fst_entry), fst_last);
--	BUG(rc < 0);
--	rc = _write(&fst, sizeof(struct fst_entry), fst_kill);
--	BUG(rc < 0);
--
--	/* update moved fcache entry */
--	memset(file, 0, sizeof(file));
--	decode_edf_name(file, fst.name, fst.type);
--	update_htab_entry(fst_kill, file);
--	/* update cached address of moved FST */
--	f_moved = file_open(file);
--	if (f_moved != NULL)
--		f->fst_addr = fst_kill;
--
--skip_copy:
--	/* delete last entry */
--	rc = _zero(fst_last, sizeof(struct fst_entry));
--	BUG(rc < 0);
--
--	/* if the deleted entry was the first of a block, free the block */
--	if (fst_last % cmsfs.blksize == 0) {
--		cache_dblocks(&walk);
--		/* delete the last block from dlist */
--		walk.dlist_used--;
--		free_block(fst_last);
--		purge_dblock_ptrs(cmsfs.dir_levels, get_fop(cmsfs.fdir));
--		rewrite_dblock_ptrs(&walk);
--		free_dblocks(&walk);
--	}
--
--	destroy_file_object(f);
--	decrease_file_count();
--	update_block_count();
--	return 0;
--
--error:
--	destroy_file_object(f);
--	return rc;
--}
--
- static int cmsfs_unlink(const char *path)
- {
- 	struct fst_entry fst;
--- 
-1.7.4
-

0068-cmsfs-fuse-Enlarge-fsname-string.patch

@@ -1,31 +0,0 @@
-From 62c2c000645613cb6be82f48fc641c07ca25370c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 29 Mar 2011 10:50:08 +0200
-Subject: [PATCH 68/70] cmsfs-fuse: Enlarge fsname string
-
-Description: cmsfs-fuse: Enlarge fsname string
-Symptom:     Truncated device part of file system name
-Problem:     The device part of the file system name was limited to 50
-             characters and gets truncated for long device names, for
-             instance if /dev/disk/by-path/ device names are used.
-Solution:    Increase the fsname string limit to 200 characters.
----
- cmsfs-fuse/cmsfs-fuse.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/cmsfs-fuse/cmsfs-fuse.c b/cmsfs-fuse/cmsfs-fuse.c
-index 9f1aa1a..a3a16d0 100644
---- a/cmsfs-fuse/cmsfs-fuse.c
-+++ b/cmsfs-fuse/cmsfs-fuse.c
-@@ -46,7 +46,7 @@ struct list text_type_list;
- FILE *logfile;
- 
- #define PAGE_SIZE	0xfff
--#define FSNAME_MAX_LEN	50
-+#define FSNAME_MAX_LEN	200
- #define MAX_FNAME	18
- 
- #define CMSFS_OPT(t, p, v) { t, offsetof(struct cmsfs, p), v }
--- 
-1.7.4
-

0069-cmsfs-fuse-Unable-to-use-cmsfs-fuse-if-HOME-is-not-s.patch

@@ -1,62 +0,0 @@
-From 3a7a5e5eaec3aff2e078a91b76f09eb4ae7f8778 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 29 Mar 2011 10:50:37 +0200
-Subject: [PATCH 69/70] cmsfs-fuse: Unable to use cmsfs-fuse if $HOME is not set
-
-Description: cmsfs-fuse: Unable to use cmsfs-fuse if $HOME is not set.
-Symptom:     Segmentation fault while starting cmsfs-fuse.
-Problem:     Missing malloc if $HOME environment variable is not set.
-Solution:    Allocate the string buffer before the $HOME query.
----
- cmsfs-fuse/config.c |   22 ++++++++++++----------
- 1 files changed, 12 insertions(+), 10 deletions(-)
-
-diff --git a/cmsfs-fuse/config.c b/cmsfs-fuse/config.c
-index 9f9de45..f89e444 100644
---- a/cmsfs-fuse/config.c
-+++ b/cmsfs-fuse/config.c
-@@ -26,21 +26,20 @@ char *conffile;
- 
- int open_conf_file(FILE **fh)
- {
--	const char *home_env = getenv("HOME");
--
--	if (home_env == NULL)
--		goto no_home;
-+	const char *home_env;
- 
- 	conffile = malloc(4096);
- 	if (conffile == NULL)
- 		DIE_PERROR("malloc failed");
-+
-+	home_env = getenv("HOME");
-+	if (home_env == NULL)
-+		goto no_home;
-+
- 	sprintf(conffile, "%s/.cmsfs-fuse/filetypes.conf", home_env);
- 	*fh = fopen(conffile, "r");
--	if (*fh == NULL)
--		goto no_home;
--out:
--	DEBUG("using config file: %s\n", conffile);
--	return 0;
-+	if (*fh != NULL)
-+		goto out;
- 
- no_home:
- 	sprintf(conffile, "%s/%s", TOOLS_SYSCONFDIR,
-@@ -50,7 +49,10 @@ no_home:
- 		free(conffile);
- 		return -ENOENT;
- 	}
--	goto out;
-+out:
-+	DEBUG("using config file: %s\n", conffile);
-+	free(conffile);
-+	return 0;
- }
- 
- void add_filetype(char *name, struct list *head)
--- 
-1.7.4
-

0070-hyptop-Prevent-interactive-mode-on-s390-line-mode-te.patch

@@ -1,81 +0,0 @@
-From 7ec17ba524709c44561ed6016ba2940473bfa48f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 29 Mar 2011 10:51:45 +0200
-Subject: [PATCH 70/70] hyptop: Prevent interactive mode on s390 line mode terminals
-
-Description: hyptop: Prevent interactive mode on s390 line mode terminals
-Symptom:     Unreadable output, when hyptop is started on line mode terminals.
-Problem:     Check for line mode terminal is missing.
-Solution:    To prevent hyptop starting in interactive mode on line mode
-             terminals, the TERM variable is checked. If TERM is unset or
-             set to "dumb" interactive mode is not allowed.
----
- hyptop/hyptop.8 |    8 ++++++++
- hyptop/hyptop.c |   21 ++++++++++++++++++++-
- 2 files changed, 28 insertions(+), 1 deletions(-)
-
-diff --git a/hyptop/hyptop.8 b/hyptop/hyptop.8
-index 325613b..19c9d7c 100644
---- a/hyptop/hyptop.8
-+++ b/hyptop/hyptop.8
-@@ -211,3 +211,11 @@ for CPU time calculation, enter:
- .br
- 
-   # hyptop -t ifl,cp
-+
-+.SH ENVIRONMENT
-+.TP
-+.B TERM
-+The TERM environment variable specifies your terminal type. To run
-+\fBhyptop\fP in interactive mode the TERM environment variable has
-+to be set. The interactive mode is not available for terminals that
-+have TERM=dumb (e.g. line mode terminals).
-diff --git a/hyptop/hyptop.c b/hyptop/hyptop.c
-index c42e8b0..c558a21 100644
---- a/hyptop/hyptop.c
-+++ b/hyptop/hyptop.c
-@@ -199,6 +199,23 @@ static int l_initscr(void)
- }
- 
- /*
-+ * Check if terminal is able to run hyptop in curses mode
-+ */
-+static void l_term_check(void)
-+{
-+	char *term_str = getenv("TERM");
-+
-+	if (!term_str)
-+		ERR_EXIT("Please set TERM environment variable or "
-+			 "try \"--batch_mode\"\n");
-+
-+ 	/* S390 line mode terminals normally have TERM=dumb */
-+	if (strcmp(term_str, "dumb") == 0)
-+		ERR_EXIT("Terminal of type \"dumb\" is not supported,"
-+			" try \"--batch_mode\"\n");
-+}
-+
-+/*
-  * Init curses
-  */
- static void l_term_init(void)
-@@ -206,6 +223,8 @@ static void l_term_init(void)
- 	if (g.o.batch_mode_specified)
- 		return;
- 
-+	l_term_check();
-+
- 	if (l_initscr() == ERR)
- 		goto fail;
- 	if (noecho() == ERR)
-@@ -221,7 +240,7 @@ static void l_term_init(void)
- 	l_sig_handler_init();
- 	return;
- fail:
--	ERR_EXIT("Could not initialize curses, try \"--batchmode\"\n");
-+	ERR_EXIT("Could not initialize curses, try \"--batch_mode\"\n");
- }
- 
- /*
--- 
-1.7.4
-

0071-cpuplugd-Fix-incorrect-multiplication-in-rules-evalu.patch

@@ -1,28 +0,0 @@
-From 07e1c6ff7f6deb2c35c436c5d5def61e6aac32ed Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Tue, 5 Apr 2011 14:52:24 +0200
-Subject: [PATCH] cpuplugd: Fix incorrect multiplication in rules evaluation
-
-Description: cpuplugd: Fix incorrect multiplication in rules evaluation
-Symptom:     Rules don't evaluate correctly when multiplication (*) is used.
-Problem:     Missing return statement in switch/case block.
-Solution:    Add return statement.
----
- cpuplugd/terms.c |    1 +
- 1 files changed, 1 insertions(+), 0 deletions(-)
-
-diff --git a/cpuplugd/terms.c b/cpuplugd/terms.c
-index 0d08e9e..2371efa 100644
---- a/cpuplugd/terms.c
-+++ b/cpuplugd/terms.c
-@@ -339,6 +339,7 @@ static double eval_double(struct term *fn, struct symbols *symbols)
- 		a = eval_double(fn->left, symbols);
- 		b = eval_double(fn->right, symbols);
- 		sum = a*b;
-+		return sum;
- 		/*return eval_double(fn->left, symbols) *
- 			eval_double(fn->right, symbols);*/
- 	case OP_DIV:
--- 
-1.7.4
-

1000-ziomon-linker.patch

@@ -1,12 +0,0 @@
-diff -up s390-tools-1.8.2/ziomon/Makefile.linker s390-tools-1.8.2/ziomon/Makefile
---- s390-tools-1.8.2/ziomon/Makefile.linker	2010-06-10 08:54:55.000000000 +0200
-+++ s390-tools-1.8.2/ziomon/Makefile	2010-06-10 08:55:48.000000000 +0200
-@@ -21,7 +21,7 @@ ziomon_util: ziomon_util_main.o ziomon_t
- ziomon_zfcpdd_main.o: ziomon_zfcpdd.c ziomon_zfcpdd.h
- 	$(CC) -DWITH_MAIN $(CFLAGS) $(CPPFLAGS) -c $< -o $@
- ziomon_zfcpdd: ziomon_zfcpdd_main.o ziomon_tools.o
--	$(LINK) $^ -o $@ -lm -lrt
-+	$(LINK) $^ -o $@ -lm -lrt -lpthread
- 
- ziorep_traffic: ziorep_traffic.o ziorep_framer.o ziorep_frameset.o \
- 		ziorep_printers.o ziomon_dacc.o ziomon_util.o \

20-zipl-kernel.install

@@ -0,0 +1,183 @@
+#!/bin/bash
+
+if ! [[ $KERNEL_INSTALL_MACHINE_ID ]]; then
+    exit 0
+fi
+
+[[ -f /etc/sysconfig/kernel ]] && . /etc/sysconfig/kernel
+
+COMMAND="$1"
+KERNEL_VERSION="$2"
+BOOT_DIR_ABS="$3"
+KERNEL_IMAGE="$4"
+
+KERNEL_DIR="${KERNEL_IMAGE%/*}"
+
+MACHINE_ID=$KERNEL_INSTALL_MACHINE_ID
+
+BLS_DIR="/boot/loader/entries"
+ZIPLCFG="/etc/zipl.conf"
+CMDLINE_LINUX_DEBUG=" systemd.log_level=debug systemd.log_target=kmsg"
+LINUX_DEBUG_VERSION_POSTFIX="_with_debugging"
+LINUX_DEBUG_TITLE_POSTFIX=" with debugging"
+
+mkbls() {
+    local kernelver=$1 && shift
+    local datetime=$1 && shift
+    local kernelopts=$1 && shift
+
+    local debugname=""
+    local flavor=""
+
+    if [[ "$kernelver" == *\+* ]] ; then
+        local flavor=-"${kernelver##*+}"
+        if [[ "${flavor}" == "-debug" ]]; then
+            local debugname=" with debugging"
+	    local debugid="-debug"
+        fi
+    fi
+
+    cat <<EOF
+title ${NAME} (${kernelver}) ${VERSION}${debugname}
+version ${kernelver}${debugid}
+linux /boot/vmlinuz-${kernelver}
+initrd /boot/initramfs-${kernelver}.img
+options ${kernelopts}
+id ${ID}-${datetime}-${kernelver}${debugid}
+grub_users \$grub_users
+grub_arg --unrestricted
+grub_class kernel${flavor}
+EOF
+}
+
+[[ "$KERNEL_VERSION" == *\+* ]] && flavor=-"${KERNEL_VERSION##*+}"
+case "$COMMAND" in
+    add)
+        if [[ "${KERNEL_DIR}" != "/boot" ]]; then
+            # rename to match the name used in the pseudo-BLS snippet above
+            cp --remove-destination --preserve=timestamps -T "${KERNEL_IMAGE}" "/boot/vmlinuz-${KERNEL_VERSION}"
+            command -v restorecon &>/dev/null && \
+                restorecon -R "/boot/vmlinuz-${KERNEL_VERSION}"
+
+            for i in \
+                    "$KERNEL_DIR"/System.map \
+                    "$KERNEL_DIR"/config \
+                    "$KERNEL_DIR"/zImage.stub
+            do
+                [[ -e "$i" ]] || continue
+                cp --preserve=timestamps -T "$i" "/boot/${i##*/}-${KERNEL_VERSION}"
+                command -v restorecon &>/dev/null && \
+                    restorecon -R "/boot/${i##*/}-${KERNEL_VERSION}"
+            done
+            # hmac is .vmlinuz-<version>.hmac so needs a special treatment
+            i="$KERNEL_DIR/.${KERNEL_IMAGE##*/}.hmac"
+            if [[ -e "$i" ]]; then
+                cp --preserve=timestamps "$i" "/boot/.${KERNEL_IMAGE##*/}-${KERNEL_VERSION}.hmac"
+                command -v restorecon &>/dev/null && \
+                    restorecon "/boot/.${KERNEL_IMAGE##*/}-${KERNEL_VERSION}.hmac"
+            fi
+        fi
+
+        if [[ ! -f /sbin/new-kernel-pkg || -d "${BLS_DIR}" ]]; then
+            declare -a BOOT_OPTIONS
+            if [[ -f /etc/kernel/cmdline ]]; then
+                read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
+            fi
+
+            if ! [[ ${BOOT_OPTIONS[*]} ]]; then
+                read -r -d '' -a line < /proc/cmdline
+                for i in "${line[@]}"; do
+                    [[ "${i#initrd=*}" != "$i" || "${i#BOOT_IMAGE=*}" != "$i" ]] && continue
+                    BOOT_OPTIONS+=("$i")
+                done
+            fi
+
+            [[ -d "$BLS_DIR" ]] || mkdir -m 0700 -p "$BLS_DIR"
+            BLS_TARGET="${BLS_DIR}/${MACHINE_ID}-${KERNEL_VERSION}.conf"
+            if [[ -f "${KERNEL_DIR}/bls.conf" ]]; then
+                cp --preserve=timestamps -T "${KERNEL_DIR}/bls.conf" "${BLS_TARGET}" || exit $?
+                sed -i -e "s,^linux.*,linux /boot/vmlinuz-${KERNEL_VERSION},g" "${BLS_TARGET}"
+                sed -i -e "s,^initrd.*,initrd /boot/initramfs-${KERNEL_VERSION}.img,g" "${BLS_TARGET}"
+                sed -i -e "s#^options.*#options ${BOOT_OPTIONS[*]}#g" "${BLS_TARGET}"
+            else
+                mkbls "${KERNEL_VERSION}" \
+                    "$(date -u +%Y%m%d%H%M%S -d "$(stat -c '%y' "${KERNEL_DIR}")")" \
+                    "${BOOT_OPTIONS[*]}" >"${BLS_TARGET}"
+            fi
+
+            if [[ "$KERNEL_VERSION" == *\+* ]] && [ "x$DEFAULTDEBUG" != "xyes" ]; then
+                UPDATEDEFAULT="no"
+            fi
+
+            if [[ "x$UPDATEDEFAULT" = "xyes" ]]; then
+                TITLE="$(grep '^title[ \t]' "${BLS_TARGET}" | sed -e 's/^title[ \t]*//')"
+                NEWDEFAULT="${TITLE}"
+            fi
+
+            if [ "x${MAKEDEBUG}" = "xyes" ]; then
+                BLS_DEBUG="$(echo ${BLS_TARGET} | sed -e "s/${KERNEL_VERSION}/${KERNEL_VERSION}~debug/")"
+                cp --preserve=timestamps -T  "${BLS_TARGET}" "${BLS_DEBUG}"
+                TITLE="$(grep '^title[ \t]' "${BLS_DEBUG}" | sed -e 's/^title[ \t]*//')"
+		VERSION="$(grep '^version[ \t]' "${BLS_DEBUG}" | sed -e 's/^version[ \t]*//')"
+                BLSID="$(grep '^id[ \t]' "${BLS_DEBUG}" | sed -e "s/${KERNEL_VERSION}/${KERNEL_VERSION}~debug/")"
+                sed -i -e "s/^title.*/title ${TITLE}${LINUX_DEBUG_TITLE_POSTFIX}/" "${BLS_DEBUG}"
+		sed -i -e "s/^version.*/version ${VERSION}${LINUX_DEBUG_VERSION_POSTFIX}/" "${BLS_DEBUG}"
+                sed -i -e "s/^id.*/${BLSID}/" "${BLS_DEBUG}"
+                sed -i -e "s#^options.*#options ${BOOT_OPTIONS[*]}${CMDLINE_LINUX_DEBUG}#" "${BLS_DEBUG}"
+                if [ -n "$NEWDEFAULT" -a "x$DEFAULTDEBUG" = "xyes" ]; then
+                    TITLE="$(grep '^title[ \t]' "${BLS_DEBUG}" | sed -e 's/^title[ \t]*//')"
+                    NEWDEFAULT="${TITLE}"
+                fi
+	    fi
+
+            if [ -n "$NEWDEFAULT" ] && [ -f "${ZIPLCFG}" ]; then
+                if grep -q "^default=" "${ZIPLCFG}"; then
+                    sed -i -e "s,^default=.*,default=${NEWDEFAULT}," "${ZIPLCFG}"
+                else
+                    echo "default=${NEWDEFAULT}" >> "${ZIPLCFG}"
+                fi
+            fi
+
+            exit 0
+        fi
+
+        /sbin/new-kernel-pkg --package "kernel${flavor}" --install "$KERNEL_VERSION" || exit $?
+        /sbin/new-kernel-pkg --package "kernel${flavor}" --mkinitrd --dracut --depmod --update "$KERNEL_VERSION" || exit $?
+        /sbin/new-kernel-pkg --package "kernel${flavor}" --rpmposttrans "$KERNEL_VERSION" || exit $?
+        # If grubby is used there's no need to run other installation plugins
+        exit 77
+        ;;
+    remove)
+        if [[ ! -f /sbin/new-kernel-pkg || -d "${BLS_DIR}" ]]; then
+            ARCH="$(uname -m)"
+            BLS_TARGET="${BLS_DIR}/${MACHINE_ID}-${KERNEL_VERSION}.conf"
+            BLS_DEBUG="$(echo ${BLS_TARGET} | sed -e "s/${KERNEL_VERSION}/${KERNEL_VERSION}~debug/")"
+
+            if [ -f "${BLS_TARGET}" ] && [ -f "${ZIPLCFG}" ]; then
+                TITLE="$(grep '^title[ \t]' "${BLS_TARGET}" | sed -e 's/^title[ \t]*//')"
+                sed -i -e "/^default=${TITLE}/d" "${ZIPLCFG}"
+            fi
+
+            if [[ -f "${BLS_DEBUG}" ]]; then
+                TITLE="$(grep '^title[ \t]' "${BLS_DEBUG}" | sed -e 's/^title[ \t]*//')"
+                sed -i -e "/^default=${TITLE}/d" "${ZIPLCFG}"
+            fi
+
+            rm -f "${BLS_TARGET}" "${BLS_DEBUG}"
+
+            for i in vmlinuz System.map config zImage.stub dtb; do
+                rm -rf "/boot/${i}-${KERNEL_VERSION}"
+            done
+            # hmac is .vmlinuz-<version>.hmac so needs a special treatment
+            rm -f "/boot/.vmlinuz-${KERNEL_VERSION}.hmac"
+
+            exit 0
+        fi
+
+        /sbin/new-kernel-pkg --package "kernel${flavor+-$flavor}" --rminitrd --rmmoddep --remove "$KERNEL_VERSION" || exit $?
+        # If grubby is used there's no need to run other installation plugins
+        exit 77
+        ;;
+    *)
+        ;;
+esac

52-zipl-rescue.install

@@ -0,0 +1,42 @@
+#!/bin/bash
+
+[[ -f /etc/os-release ]] && . /etc/os-release
+[[ -f /etc/sysconfig/kernel ]] && . /etc/sysconfig/kernel
+
+COMMAND="$1"
+KERNEL_VERSION="$2"
+BOOT_DIR_ABS="$3"
+KERNEL_IMAGE="$4"
+
+MACHINE_ID=$KERNEL_INSTALL_MACHINE_ID
+
+BLS_DIR="/boot/loader/entries"
+
+[[ "$KERNEL_VERSION" == *\+* ]] && flavor=-"${KERNEL_VERSION##*+}"
+case "$COMMAND" in
+    add)
+        if [[ ! -f /sbin/new-kernel-pkg || -d "${BLS_DIR}" ]]; then
+            declare -a BOOT_OPTIONS
+            if [[ -f /etc/kernel/cmdline ]]; then
+                read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
+            fi
+
+            if ! [[ ${BOOT_OPTIONS[*]} ]]; then
+                read -r -d '' -a line < /proc/cmdline
+                for i in "${line[@]}"; do
+                    [[ "${i#initrd=*}" != "$i" ]] && continue
+                    BOOT_OPTIONS+=("$i")
+                done
+            fi
+
+            BLS_RESCUE="${BLS_DIR}/${MACHINE_ID}-0-rescue.conf"
+            if [[ -f "${BLS_RESCUE}" ]] && grep -q '^options.*$kernelopts' "${BLS_RESCUE}"; then
+               sed -i -e "s,^linux.*,linux /boot/vmlinuz-0-rescue-${MACHINE_ID},g" "${BLS_RESCUE}"
+               sed -i -e "s,^initrd.*,initrd /boot/initramfs-0-rescue-${MACHINE_ID}.img,g" "${BLS_RESCUE}"
+               sed -i -e "s#^options.*#options ${BOOT_OPTIONS[*]}#g" "${BLS_RESCUE}"
+            fi
+        fi
+        ;;
+    *)
+        ;;
+esac

91-zipl.install

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+if [[ ! -f /etc/zipl.conf ]]; then
+    exit 0
+fi
+
+COMMAND="$1"
+
+case "$COMMAND" in
+    add|remove)
+	zipl > /dev/null
+	;;
+    *)
+        ;;
+esac

ccw.udev

@@ -1,13 +1,4 @@
-ACTION!="add|change", GOTO="ccw_end"
+ACTION!="add|bind|change", GOTO="ccw_end"
 SUBSYSTEM!="ccw", GOTO="ccw_end"
-ATTRS{cutype}=="1731/01", RUN+="ccw_init"
-ATTRS{cutype}=="1731/02", RUN+="ccw_init"
-ATTRS{cutype}=="1731/05", RUN+="ccw_init"
-ATTRS{cutype}=="1731/06", RUN+="ccw_init"
-ATTRS{cutype}=="3088/01", RUN+="ccw_init"
-ATTRS{cutype}=="3088/08", RUN+="ccw_init"
-ATTRS{cutype}=="3088/60", RUN+="ccw_init"
-ATTRS{cutype}=="3088/61", RUN+="ccw_init"
-ATTRS{cutype}=="3088/1e", RUN+="ccw_init"
-ATTRS{cutype}=="3088/1f", RUN+="ccw_init"
+DRIVER=="ctcm|lcs|qeth", RUN+="ccw_init"
 LABEL="ccw_end"

ccw_init

@@ -24,6 +24,25 @@ get_config_line_by_subchannel()
     return 1
 }
 
+# borrowed from network-scrips, initscripts along with the get_config_by_subchannel
+[ -z "$__sed_discard_ignored_files" ] && __sed_discard_ignored_files='/\(~\|\.bak\|\.old\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave\)$/d'
+
+get_config_by_subchannel ()
+{
+    LANG=C grep -E -i -l \
+        "^[[:space:]]*SUBCHANNELS=['\"]?([0-9]\.[0-9]\.[a-f0-9]+,){0,2}${1}(,[0-9]\.[0-9]\.[a-f0-9]+){0,2}['\"]?([[:space:]]+#|[[:space:]]*$)" \
+        /etc/sysconfig/network-scripts/ifcfg-* \
+        | LC_ALL=C sed -e "$__sed_discard_ignored_files"
+}
+
+get_config_by_subchannel_nm ()
+{
+    LANG=C grep -E -i -l \
+        "^s390-subchannels=([0-9]\.[0-9]\.[a-f0-9]+;){0,2}${1};([0-9]\.[0-9]\.[a-f0-9]+;){0,2}$" \
+        /etc/NetworkManager/system-connections/*.nmconnection \
+        | LC_ALL=C sed -e "$__sed_discard_ignored_files"
+}
+
 CHANNEL=${DEVPATH##*/}
 
 if [ $MODE = "dracut" ]; then
@@ -49,14 +68,19 @@ if [ $MODE = "dracut" ]; then
 elif [ $MODE = "normal" ]; then
     NOLOCALE="yes"
 
-    . /etc/sysconfig/network-scripts/network-functions
-
     CONFIG_FILE=$(get_config_by_subchannel $CHANNEL)
 
     if [ -n "$CONFIG_FILE" ]; then
 	. $CONFIG_FILE
     else
-	exit 1
+	CONFIG_FILE=$(get_config_by_subchannel_nm $CHANNEL)
+	if [ -n "$CONFIG_FILE" ]; then
+	    NETTYPE=$(sed -nr "/^\[ethernet\]/ { :l /^s390-nettype[ ]*=/ { s/.*=[ ]*//; p; q;}; n; b l;}" $CONFIG_FILE)
+	    SUBCHANNELS=$(sed -nr "/^\[ethernet\]/ { :l /^s390-subchannels[ ]*=/ { s/.*=[ ]*//; p; q;}; n; b l;}" $CONFIG_FILE | sed -e "s/;/,/g" -e "s/,$//")
+	    LAYER2=$(sed -nr "/^\[ethernet-s390-options\]/ { :l /^layer2[ ]*=/ { s/.*=[ ]*//; p; q;}; n; b l;}" $CONFIG_FILE)
+	else
+	    exit 1
+	fi
     fi
 else
     echo "Unknown mode=$MODE"
@@ -88,7 +112,7 @@ if [ -n "$PORTNAME" ]; then
         fi
 fi
 if [ "$NETTYPE" = "ctc" -a -n "$CTCPROT" ]; then
-	OPTIONS="$OPTIONS protocol=$CTCPROTO"
+	OPTIONS="$OPTIONS protocol=$CTCPROT"
 fi
 
 # SUBCHANNELS is only set on mainframe ccwgroup devices

cmsfs-1.1.8-kernel26.patch

@@ -1,12 +0,0 @@
-diff -urN cmsfs-1.1.8/cmsfssed.sh cmsfs-1.1.8_/cmsfssed.sh
---- cmsfs-1.1.8/cmsfssed.sh	2003-02-28 17:52:59.000000000 -0500
-+++ cmsfs-1.1.8_/cmsfssed.sh	2004-05-28 16:36:22.000000000 -0400
-@@ -85,7 +85,7 @@
-         DRIVER_SOURCE="cmsfs22x.c"
-         MODULES_DIRECTORY="/lib/modules/`uname -r`/fs"
-         ;;
--    2.4*|2.5*)
-+    2.4*|2.5*|2.6*)
-         LINUX_RELEASE="2.4"
- #       ln -s cmsfs24x.c cmsfsvfs.c
-         INCLUDES="-I/lib/modules/`uname -r`/build/include"

cmsfs-1.1.8-use-detected-filesystem-block-size-on-FBA-devices.patch

@@ -1,31 +0,0 @@
-From 25442f958a12b428b7d063b927ac48965dcd8164 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Fri, 28 Jan 2011 16:11:19 +0100
-Subject: [PATCH] use detected filesystem block size on FBA devices
-
-If a FBA device is not properly formated, then the CMS file system can
-have a different block size. The cmsfs tools were able to detect the file
-system block size, but in fact they still used default 512 instead. And
-using the default was causing crashes. Now the detected value is used.
-
-https://bugzilla.redhat.com/show_bug.cgi?id=651012
----
- cmsfsany.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/cmsfsany.c b/cmsfsany.c
-index 55bcfdc..18efffb 100644
---- a/cmsfsany.c
-+++ b/cmsfsany.c
-@@ -102,7 +102,7 @@ int cmsfs_find_label(struct CMSSUPER *vol,struct CMSFSADT *adt)
-             cmsfs_error(cmsfs_ermsg);
-           }
-         vol->flags = CMSFSFBA;
--        vol->blksz = 512;
-+        vol->blksz = blksz;
-         return vol->blksz;
-       } }
- 
--- 
-1.7.3.5
-

cmsfs-1.1.8-warnings.patch

@@ -1,11 +0,0 @@
---- cmsfs-1.1.8/cmsfsvol.c.warnings	2003-07-18 01:38:57.000000000 +0200
-+++ cmsfs-1.1.8/cmsfsvol.c	2005-09-06 16:57:15.000000000 +0200
-@@ -52,7 +52,7 @@
- 
-     /*  print a header;  looks like CMS  */
-     (void) printf("LABEL  VDEV M  STAT   CYL TYPE \
--BLKSZ   FILES  BLKS USED-(%) BLKS LEFT  BLK TOTAL\n");
-+BLKSZ   FILES  BLKS USED-(%%) BLKS LEFT  BLK TOTAL\n");
- 
-     for (      ; i < argc ; i++)
-       {

cpi.initd

@@ -1,130 +0,0 @@
-#!/bin/sh
-#
-# Copyright 2009 Red Hat, Inc.
-# License: GPLv2
-# Author: Dan Horák <dhorak@redhat.com>
-#
-# cpi Set Control Program Identification on IBM zSeries
-#
-# chkconfig:   12345 80 20
-# description: Set Control Program Identification on IBM zSeries \
-#              that's reported on a Linux LPAR
-
-### BEGIN INIT INFO
-# Provides: cpi
-# Required-Start: 
-# Required-Stop: 
-# Should-Start: 
-# Should-Stop: 
-# Default-Start: 1 2 3 4 5 
-# Default-Stop: 0 6
-# Short-Description: Set control program identification on IBM zSeries
-# Description: Set Control Program Identification on IBM zSeries \
-#              that's reported on a Linux LPAR
-### END INIT INFO
-
-# Source function library.
-. /etc/init.d/functions
-
-prog="cpi"
-
-[ -e /etc/sysconfig/$prog ] && . /etc/sysconfig/$prog
-
-cpipath=/sys/firmware/cpi
-
-start() {
-    [ `id -u` -eq 0 ] || return 4
-    
-    echo -n $"Starting $prog: "
-
-    if [ -d $cpipath ]; then
-        retval=0
-        echo LINUX > $cpipath/system_type 2> /dev/null || retval=1
-        [ $retval -eq 0 ] && echo "$SYSTEM_NAME" > $cpipath/system_name 2> /dev/null || retval=1
-        [ $retval -eq 0 ] && echo "$SYSPLEX_NAME" > $cpipath/sysplex_name 2> /dev/null || retval=1
-        level_maj=`uname -r | cut -d '-' -f 1 | cut -d '.' -f 1`
-        level_min=`uname -r | cut -d '-' -f 1 | cut -d '.' -f 2`
-        level_mic=`uname -r | cut -d '-' -f 1 | cut -d '.' -f 3`
-        level=`printf '%02x%02x%02x' $level_maj $level_min $level_mic`
-        [ $retval -eq 0 ] && echo $level > $cpipath/system_level 2> /dev/null || retval=1
-
-        [ $retval -eq 0 ] && echo 1 > $cpipath/set 2> /dev/null || retval=1
-    else
-        retval=1
-    fi
-
-    [ $retval -eq 0 ] && success || failure
-    echo
-    return $retval
-}
-
-stop() {
-    echo -n $"Stopping $prog: "
-
-    # nothing to do
-    success
-    echo
-    return 0
-}
-
-restart() {
-    stop
-    start
-}
-
-reload() {
-    restart
-}
-
-force_reload() {
-    restart
-}
-
-rh_status() {
-    if [ -d $cpipath ]; then
-        echo -n "System type: "; cat $cpipath/system_type
-        echo -n "System level: "; cat $cpipath/system_level
-        echo -n "System name: "; cat $cpipath/system_name
-        echo -n "Sysplex name: "; cat $cpipath/sysplex_name
-        retval=0
-    else
-        echo "Control Program Identification system interface doesn't exist."
-        retval=1
-    fi
-    return $retval
-}
-
-rh_status_q() {
-    rh_status >/dev/null 2>&1
-}
-
-
-case "$1" in
-    start)
-        $1
-        ;;
-    stop)
-        $1
-        ;;
-    restart)
-        $1
-        ;;
-    reload)
-        rh_status_q || exit 7
-        $1
-        ;;
-    force-reload)
-        force_reload
-        ;;
-    status)
-        rh_status
-        ;;
-    condrestart|try-restart)
-        rh_status_q || exit 0
-        restart
-        ;;
-    *)
-        echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}"
-        exit 2
-esac
-exit $?

cpi.sysconfig

@@ -1,5 +0,0 @@
-# Define a system name (8 chars maximum)
-SYSTEM_NAME=
-
-# Define a sysplex name (8 chars maximum)
-SYSPLEX_NAME=

cpuplugd.initd

@@ -1,114 +0,0 @@
-#! /bin/sh
-#
-# chkconfig: 2345 90 10
-# description: Start the cpu hotplug daemon for Linux on System z
-# processname: cpuplugd
-# config: /etc/sysconfig/cpuplugd
-# pidfile: /var/run/cpuplugd.pid
-
-### BEGIN INIT INFO
-# Provides: cpuplugd
-# Required-Start: $local_fs $remote_fs
-# Required-Stop: $local_fs $remote_fs
-# Should-Start:
-# Should-Stop:
-# Default-Start: 2 3 4 5
-# Default-Stop: 0 1 6
-# Short-Description: Start the cpu hotplug daemon for Linux on System z
-# Description: Starts the cpuplugd. It uses the configuration
-#              file /etc/sysconfig/cpuplugd
-### END INIT INFO
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-exec="/usr/sbin/cpuplugd"
-prog="cpuplugd"
-config="/etc/sysconfig/cpuplugd"
-
-lockfile=/var/lock/subsys/$prog
-
-start() {
-    [ -x $exec ] || exit 5
-    [ -f $config ] || exit 6
-    [ `id -u` -eq 0 ] || exit 4
-    echo -n $"Starting $prog: "
-    daemon $exec -c $config
-    retval=$?
-    echo
-    [ $retval -eq 0 ] && touch $lockfile
-    return $retval
-}
-
-stop() {
-    [ `id -u` -eq 0 ] || exit 4
-    echo -n $"Stopping $prog: "
-    killproc $exec
-    retval=$?
-    echo
-    [ $retval -eq 0 ] && rm -f $lockfile
-    return $retval
-}
-
-restart() {
-    stop
-    #
-    # We have to wait 2-3 seconds here. When the daemon is stopped it takes
-    # the time we sleep to reactivate cpus. If we restart to fast and
-    # cpuplugd wasn't able to restore some settings we may get a undesired
-    # online cpu count after cpuplugd shutdown
-    #
-    sleep 4
-    start
-}
-
-reload() {
-    restart
-}
-
-force_reload() {
-    restart
-}
-
-rh_status() {
-    # run checks to determine if the service is running or use generic status
-#    status -l $prog $exec
-    status $exec
-}
-
-rh_status_q() {
-    rh_status >/dev/null 2>&1
-}
-
-
-case "$1" in
-    start)
-        rh_status_q && exit 0
-        $1
-        ;;
-    stop)
-        rh_status_q || exit 0
-        $1
-        ;;
-    restart)
-        $1
-        ;;
-    reload)
-        rh_status_q || exit 7
-        $1
-        ;;
-    force-reload)
-        force_reload
-        ;;
-    status)
-        rh_status
-        ;;
-    condrestart|try-restart)
-        rh_status_q || exit 0
-        restart
-        ;;
-    *)
-        echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}"
-        exit 2
-esac
-exit $?

device_cio_free

@@ -26,6 +26,7 @@ DASDCONFIG=/etc/dasd.conf
 ZFCPCONFIG=/etc/zfcp.conf
 ZNETCONFIG=/etc/ccw.conf
 BLACKLIST=/proc/cio_ignore
+CIO_SETTLE=/proc/cio_settle
 VERBOSE=
 PATH=/bin:/sbin
 DEVICE=			# list of devices given on command line
@@ -97,6 +98,12 @@ wait_on_single_device()
 # at this point we know the content of ALL_DEVICES is syntacticly correct
 wait_on_devices()
 {
+    if [ -w $CIO_SETTLE ]; then
+	[ $VERBOSE ] && echo "Waiting until all pending CIO requests are processed"
+	echo 1 > $CIO_SETTLE
+	return
+    fi
+
     OLD_IFS=$IFS
     IFS=","
     set $ALL_DEVICES
@@ -241,6 +248,7 @@ if [ "$DEVICE" ]; then
     [ $VERBOSE ] && echo "Freeing specific devices"
     free_device $DEVICE
     wait_on_devices
+    udevadm settle
     exit 0
 fi
 
@@ -298,6 +306,14 @@ if [ $MODE_ZNET ]; then
 	eval "$line"
         free_device $SUBCHANNELS
     done
+    for line in $(LANG=C grep -E -i -h \
+	"^s390-subchannels=([0-9]\.[0-9]\.[a-f0-9]+;){2,3}$" \
+	$( (ls /etc/NetworkManager/system-connections/*.nmconnection 2> /dev/null ||  echo "__no_config_file") | \
+        LC_ALL=C sed -e "$__sed_discard_ignored_files") 2> /dev/null)
+    do
+	SUBCHANNELS="$(echo $line | sed -e "s/s390-subchannels=//" -e "s/;/,/g")"
+        free_device $SUBCHANNELS
+    done
 fi
 
 [ -z "$ALL_DEVICES" ] && exit 0

device_cio_free.service

@@ -1,10 +1,12 @@
 [Unit]
 Description=Free all devices on startup
 DefaultDependencies=no
-Before=sysinit.target
+Before=sysinit.target systemd-udev-trigger.service
 
 [Service]
 Type=oneshot
 RemainAfterExit=yes
-ExecStart=/sbin/device_cio_free
-StandardOutput=syslog
+ExecStart=/usr/sbin/device_cio_free
+
+[Install]
+WantedBy=sysinit.target

lib-zfcp-hbaapi-2.1-module.patch

@@ -1,26 +0,0 @@
-diff -up lib-zfcp-hbaapi-2.1/Makefile.am.module lib-zfcp-hbaapi-2.1/Makefile.am
---- lib-zfcp-hbaapi-2.1/Makefile.am.module	2010-07-21 09:55:20.000000000 +0200
-+++ lib-zfcp-hbaapi-2.1/Makefile.am	2011-01-14 10:42:06.000000000 +0100
-@@ -69,6 +69,10 @@ libzfcphbaapi_la_LDFLAGS = \
- 	-lpthread -Wl,-init,_initvlib,-fini,_finivlib \
- 	-export-symbols $(SYMFILE)
- 
-+if VENDORLIB
-+libzfcphbaapi_la_LDFLAGS += -module -avoid-version -release $(VERSION)
-+endif
-+
- bin_PROGRAMS = zfcp_ping zfcp_show
- 
- zfcp_ping_SOURCES = fc_tools/zfcp_ping.c
-diff -up lib-zfcp-hbaapi-2.1/Makefile.in.module lib-zfcp-hbaapi-2.1/Makefile.in
---- lib-zfcp-hbaapi-2.1/Makefile.in.module	2010-09-17 13:17:17.000000000 +0200
-+++ lib-zfcp-hbaapi-2.1/Makefile.in	2011-01-14 10:42:44.000000000 +0100
-@@ -279,6 +279,8 @@ libzfcphbaapi_la_LDFLAGS = \
- 	-lpthread -Wl,-init,_initvlib,-fini,_finivlib \
- 	-export-symbols $(SYMFILE)
- 
-+@VENDORLIB_TRUE@libzfcphbaapi_la_LDFLAGS += -module -avoid-version -release $(VERSION)
-+
- zfcp_ping_SOURCES = fc_tools/zfcp_ping.c
- zfcp_ping_LDADD = -lzfcphbaapi
- zfcp_show_SOURCES = fc_tools/zfcp_show.c

lib-zfcp-hbaapi-2.1-u8.patch

@@ -1,13 +0,0 @@
-diff -up lib-zfcp-hbaapi-2.1/vlib_sg_io.c.u8 lib-zfcp-hbaapi-2.1/vlib_sg_io.c
---- lib-zfcp-hbaapi-2.1/vlib_sg_io.c.u8	2011-01-14 11:57:51.000000000 +0100
-+++ lib-zfcp-hbaapi-2.1/vlib_sg_io.c	2011-01-14 11:58:05.000000000 +0100
-@@ -24,6 +24,9 @@
- #include <sys/types.h>
- #include <sys/ioctl.h>
- #include <sys/time.h>
-+
-+typedef __u8 u8;
-+
- #include <scsi/scsi.h>
- #include <scsi/sg.h>
- 

lib-zfcp-hbaapi-2.1-vendorlib.patch

@@ -1,37 +0,0 @@
-diff -up lib-zfcp-hbaapi-2.1/Makefile.am.vendorlib lib-zfcp-hbaapi-2.1/Makefile.am
---- lib-zfcp-hbaapi-2.1/Makefile.am.vendorlib	2011-01-14 12:10:56.000000000 +0100
-+++ lib-zfcp-hbaapi-2.1/Makefile.am	2011-01-14 12:12:02.000000000 +0100
-@@ -76,9 +76,15 @@ endif
- bin_PROGRAMS = zfcp_ping zfcp_show
- 
- zfcp_ping_SOURCES = fc_tools/zfcp_ping.c
--zfcp_ping_LDADD = -lzfcphbaapi
- zfcp_show_SOURCES = fc_tools/zfcp_show.c
-+
-+if VENDORLIB
-+zfcp_ping_LDADD = -lHBAAPI
-+zfcp_show_LDADD = -lHBAAPI
-+else
-+zfcp_ping_LDADD = -lzfcphbaapi
- zfcp_show_LDADD = -lzfcphbaapi
-+endif
- 
- 
- if DOCS
-diff -up lib-zfcp-hbaapi-2.1/Makefile.in.vendorlib lib-zfcp-hbaapi-2.1/Makefile.in
---- lib-zfcp-hbaapi-2.1/Makefile.in.vendorlib	2011-01-14 12:11:01.000000000 +0100
-+++ lib-zfcp-hbaapi-2.1/Makefile.in	2011-01-14 12:13:05.000000000 +0100
-@@ -282,9 +282,11 @@ libzfcphbaapi_la_LDFLAGS = \
- @VENDORLIB_TRUE@libzfcphbaapi_la_LDFLAGS += -module -avoid-version -release $(VERSION)
- 
- zfcp_ping_SOURCES = fc_tools/zfcp_ping.c
--zfcp_ping_LDADD = -lzfcphbaapi
- zfcp_show_SOURCES = fc_tools/zfcp_show.c
--zfcp_show_LDADD = -lzfcphbaapi
-+@VENDORLIB_TRUE@zfcp_ping_LDADD = -lHBAAPI
-+@VENDORLIB_TRUE@zfcp_show_LDADD = -lHBAAPI
-+@VENDORLIB_FALSE@zfcp_ping_LDADD = -lzfcphbaapi
-+@VENDORLIB_FALSE@zfcp_show_LDADD = -lzfcphbaapi
- @DOCS_FALSE@man_MANS = zfcp_show.8 zfcp_ping.8	libzfcphbaapi.3 
- @DOCS_TRUE@man_MANS = libzfcphbaapi.3 dox/man/man3/SupportedHBAAPIs.3 \
- @DOCS_TRUE@		dox/man/man3/UnSupportedHBAAPIs.3 dox/man/man3/hbaapi.h.3 \

mon_statd.initd

@@ -1,172 +0,0 @@
-#! /bin/sh
-#
-# chkconfig: 2345 90 10
-# description: Configure the mon_fsstatd and mon_procd daemons.
-
-### BEGIN INIT INFO
-# Provides: mon_statd
-# Required-Start: $local_fs $remote_fs
-# Required-Stop: $local_fs $remote_fs
-# Should-Start:
-# Should-Stop:
-# Default-Start: 2 3 4 5
-# Default-Stop: 0 1 6
-# Short-Description: Configure the mon_fsstatd and mon_procd daemons.
-# Description: Configures the mon_fsstatd and mon_procd daemons. It uses the
-#              configuration file /etc/sysconfig/mon_statd.
-### END INIT INFO
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-exec_fsstat="/usr/sbin/mon_fsstatd"
-prog_fsstat="mon_fsstatd"
-exec_proc="/usr/sbin/mon_procd"
-prog_proc="mon_procd"
-
-config="/etc/sysconfig/mon_statd"
-g_retval=0
-
-lockfile_fsstat=/var/lock/subsys/$prog_fsstat
-lockfile_proc=/var/lock/subsys/$prog_proc
-
-[ -e $config ] && . $config || exit 6
-
-load_kernel_module()
-{
-    if [ ! -e /dev/monwriter ]; then
-        echo "Loading monwriter module..."
-        modprobe monwriter 2>&1
-        if [ $? -ne 0 ]; then
-            exit 1
-        fi
-        udevadm settle
-        if [ $? -ne 0 ]; then
-            exit 1
-        fi
-    fi
-}
-
-start_fsstat() {
-    [ `id -u` -eq 0 ] || exit 4
-    load_kernel_module
-    [ -x $exec_fsstat ] || exit 5
-    echo -n $"Starting $prog_fsstat: "
-    daemon $exec_fsstat -i $FSSTAT_INTERVAL
-    retval=$?
-    echo
-    [ $retval -eq 0 ] && touch $lockfile_fsstat
-    return $retval
-}
-
-start_proc() {
-    [ `id -u` -eq 0 ] || exit 4
-    load_kernel_module
-    [ -x $exec_proc ] || exit 5
-    echo -n $"Starting $prog_proc: "
-    daemon $exec_proc -i $PROC_INTERVAL
-    retval=$?
-    echo
-    [ $retval -eq 0 ] && touch $lockfile_proc
-    return $retval
-}
-
-stop_fsstat() {
-    [ `id -u` -eq 0 ] || exit 4
-    echo -n $"Stopping $prog_fsstat: "
-    killproc $exec_fsstat
-    retval=$?
-    echo
-    [ $retval -eq 0 ] && rm -f $lockfile_fsstat
-    return $retval
-}
-
-stop_proc() {
-    [ `id -u` -eq 0 ] || exit 4
-    echo -n $"Stopping $prog_proc: "
-    killproc $exec_proc
-    retval=$?
-    echo
-    [ $retval -eq 0 ] && rm -f $lockfile_proc
-    return $retval
-}
-
-restart_fsstat() {
-    stop_fsstat
-    start_fsstat
-}
-
-restart_proc() {
-    stop_proc
-    start_proc
-}
-
-reload_fsstat() {
-    restart_fsstat
-}
-
-reload_proc() {
-    restart_proc
-}
-
-force_reload_fsstat() {
-    restart_fsstat
-}
-
-force_reload_proc() {
-    restart_proc
-}
-
-rh_status_fsstat() {
-    # run checks to determine if the service is running or use generic status
-    status $exec_fsstat
-}
-
-rh_status_proc() {
-    # run checks to determine if the service is running or use generic status
-    status $exec_proc
-}
-
-rh_status_fsstat_q() {
-    rh_status_fsstat >/dev/null 2>&1
-}
-
-rh_status_proc_q() {
-    rh_status_proc >/dev/null 2>&1
-}
-
-
-case "$1" in
-    start)
-	[ $FSSTAT = "yes" ] && { rh_status_fsstat_q || { start_fsstat ; g_retval=$? ; } || { g_retval=0 ; } }
-	[ $PROC = "yes" ]   && { rh_status_proc_q || { start_proc ; g_retval=$? ; } || { g_retval=0 ; } }
-        ;;
-    stop)
-	[ $FSSTAT = "yes" ] && { rh_status_fsstat_q && { stop_fsstat ; g_retval=$? ; } || { g_retval=0 ; } }
-	[ $PROC = "yes" ]   && { rh_status_proc_q && { stop_proc ; g_retval=$? ; } || { g_retval=0 ; } }
-        ;;
-    restart)
-        [ $FSSTAT = "yes" ] && { restart_fsstat ; g_retval=$? ; }
-        [ $PROC = "yes" ]   && { restart_proc ; g_retval=$? ; }
-        ;;
-    reload)
-	[ $FSSTAT = "yes" ] && { rh_status_fsstat_q && { reload_fsstat ; g_retval=$? ; } || { g_retval=7 ; } }
-	[ $PROC = "yes" ]   && { rh_status_proc_q && { reload_proc ; g_retval=$? ; } || { g_retval=7 ; } }
-        ;;
-    force-reload)
-        [ $FSSTAT = "yes" ] && { force_reload_fsstat ; g_retval=$? ; }
-        [ $PROC = "yes" ]   && { force_reload_proc ; g_retval=$? ; }
-        ;;
-    status)
-        [ $FSSTAT = "yes" ] && { rh_status_fsstat ; g_retval=$? ; }
-        [ $PROC = "yes" ]   && { rh_status_proc ; g_retval=$? ; }
-        ;;
-    condrestart|try-restart)
-	[ $FSSTAT = "yes" ] && { rh_status_fsstat_q && { restart_fsstat ; g_retval=$? ; } || { g_retval=0 ; } }
-	[ $PROC = "yes" ]   && { rh_status_proc_q && { restart_proc ; g_retval=$? ; } || { g_retval=0 ; } }
-        ;;
-    *)
-        echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}"
-        exit 2
-esac
-exit $g_retval

normalize_dasd_arg

@@ -0,0 +1,120 @@
+#!/bin/sh
+#
+# Copyright 2012 Red Hat, Inc.
+# License: GPLv2
+# Author: Jesse Keating <jkeating@redhat.com>
+#
+# Normalize DASD data into valid dasd.conf format
+#
+# Standard input should be the DASD argument
+# Standard otuput is the properly formatted content
+#
+# it is used in
+#   dracut generated initramfs
+#
+# Much of this code was salvaged from linuxrc.s390 from Anaconda:
+#
+# License GPLv2+
+#
+# Copyright (C) 2000-2004 by                                                    
+#        Bernhard Rosenkraenzer <bero@redhat.com>                               
+#        Oliver Paukstadt <opaukstadt@millenux.com>                             
+#        Karsten Hopp <karsten@redhat.de>                                       
+#        Florian La Roche <laroche@redhat.com>                                  
+#        Nils Philippsen <nils@redhat.de>                                       
+#        Helge Deller <hdeller@redhat.de>                                       
+#        David Sainty <dsainty@redhat.com>                                      
+# Copyright (C) IBM Corp. 2008,2009                                             
+#        Author: Steffen Maier <maier@de.ibm.com>
+
+
+function canonicalize_devno()
+{
+    case ${#1} in
+        3) echo "0.0.0${1}" ;;
+        4) echo "0.0.${1}" ;;
+        *) echo "${1}" ;;
+    esac
+    return 0
+}
+
+read DASD
+# See if we've gotten a format like <dev>,feature or <dev>,<dev>,<dev>
+[[ "$DASD" =~ (\,*=[[:digit:]]) ]]
+case $? in
+    # case of 0 is features, just turn the comma into a space
+    0)  echo $DASD |sed 's/,/ /g';;
+    *) # We've got no features, do things normally
+        for dasditem in $(echo $DASD |sed 's/,/ /g')
+            do
+            unset range features lo hi attrs devno lodevno hidevno devbusid sys
+            case $dasditem in
+                autodetect|probeonly|nopav|nofcx|"") continue ;; # these don't gen a config
+                *)
+                    IFS='('
+                    read range features <<< "$dasditem"
+                    unset IFS
+                    lo=${range%%-*}
+                    [[ "$lo" =~ (^[[:xdigit:]]+\.[0-3]\.[[:xdigit:]]{4}$)|(^[[:xdigit:]]{3,4}$) ]]
+                    case $? in
+                        0)  # string matched the pattern
+                            lo=$(canonicalize_devno $lo) ;;
+                        1)  # string did not match the pattern
+                            echo $"Incorrect format for lower bound of DASD range $range: $lo" 1>&2
+                            exit 1
+                            ;;
+                        2)  echo "l.$LINENO: syntax error in regex of match operator =~, code needs to be fixed" 1>&2 ;;
+                        *)  echo "l.$LINENO: unexpected return code of regex match operator =~, code needs to be fixed" 1>&2 ;;
+                    esac
+                    if [ "${range//*-*/}" = "" ]; then
+                        hi=${range##*-}
+                        [[ "$hi" =~ (^[[:xdigit:]]+\.[0-3]\.[[:xdigit:]]{4}$)|(^[[:xdigit:]]{3,4}$) ]]
+                        case $? in
+                            0)  # string matched the pattern
+                                hi=$(canonicalize_devno $hi)
+                                if [ "${lo%.*}" != "${hi%.*}" ]; then
+                                    echo $"Prefixes of DASD range $range do not match: ${lo%.*} != ${hi%.*}" 1>&2
+                                    exit 1
+                                fi
+                                ;;
+                            1)  # string did not match the pattern
+                                echo $"Incorrect format for upper bound of DASD range $range: $hi" 1>&2
+                                exit 1
+                                ;;
+                            2)  echo "l.$LINENO: syntax error in regex of match operator =~, code needs to be fixed" 1>&2 ;;
+                            *)  echo "l.$LINENO: unexpected return code of regex match operator =~, code needs to be fixed" 1>&2 ;;
+                        esac
+                    fi
+                    if [ "${features//*)/}" != "" ]; then
+                        echo $"Missing closing parenthesis at features of DASD range $range: ($features" 1>&2
+                        exit 1
+                    fi
+                    if [ -n "$features" ]; then
+                        attrs=""
+                        features="${features%)}"
+                        for feature in $(echo $features |sed 's/:/\n/g'); do
+                            case $feature in
+                                ro) attrs=$attrs" readonly" ;;
+                                diag) attrs=$attrs" use_diag" ;;
+                                erplog|failfast) attrs=$attrs" "$feature ;;
+                                *) echo $"Unknown DASD feature for device range $range: $feature" 1>&2
+                                   exit 1
+                                   ;;
+                            esac
+                        done
+                    fi
+                    [ -z "$hi" ] && hi=$lo
+                    lodevno=$((0x${lo##*.}))
+                    hidevno=$((0x${hi##*.}))
+                    for ((devno=$lodevno; $devno <= $hidevno; ++devno)); do
+                        devbusid=$(printf "%s.%04x" ${lo%.*} $devno)
+                        echo -n "$devbusid"
+                        for attr in $attrs; do
+                            echo -n " $attr=1"
+                        done
+                        echo
+                    done
+            esac
+        done
+        ;;
+esac

rpminspect.yaml

@@ -0,0 +1,8 @@
+---
+pathmigration:
+    excluded_paths:
+        - /lib/s390-tools
+
+badfuncs:
+    ignore:
+        - /usr/sbin/qethqoat

s390-tools-zipl-blscfg-rpm-nvr-sort.patch

@@ -0,0 +1,348 @@
+From b2daaa34776ba6afec879e362378f6f7563590a6 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
+Date: Mon, 20 Jun 2022 17:43:05 +0200
+Subject: [PATCH 1/2] Revert "zipl/src: Implement sorting bls entries by
+ versions"
+
+This reverts commit a0dba6bfdb50ff373fa710ffe2a307cc0748f18b.
+---
+ zipl/src/scan.c | 139 ++----------------------------------------------
+ 1 file changed, 3 insertions(+), 136 deletions(-)
+
+diff --git a/zipl/src/scan.c b/zipl/src/scan.c
+index 0cea1d4..9352f76 100644
+--- a/zipl/src/scan.c
++++ b/zipl/src/scan.c
+@@ -10,7 +10,6 @@
+  *
+  */
+ 
+-static const char *VERSION_KEYWORD = "version";
+ 
+ /* Need ISOC99 function isblank() in ctype.h */
+ #ifndef __USE_ISOC99
+@@ -646,7 +645,7 @@ scan_file(const char* filename, struct scan_token** token)
+ 
+ 
+ static int
+-bls_filter_by_names(const struct dirent *ent)
++bls_filter(const struct dirent *ent)
+ {
+ 	int offset = strlen(ent->d_name) - strlen(".conf");
+ 
+@@ -656,111 +655,13 @@ bls_filter_by_names(const struct dirent *ent)
+ 	return strncmp(ent->d_name + offset, ".conf", strlen(".conf")) == 0;
+ }
+ 
+-struct version {
+-	char *line; /* pointer to a line with version keyword */
+-	int offset; /* offset of version value in the line */
+-};
+-
+-/*
+- * Locate version in bls file represented by ENT
+- */
+-static void get_version(const struct dirent *ent, struct version *v)
+-{
+-	char *line = NULL;
+-	size_t len = 0;
+-	char *d_name;
+-	FILE *stream;
+-	ssize_t read;
+-
+-	memset(v, 0, sizeof(*v));
+-	d_name = misc_make_path((char *)blsdir, (char *)ent->d_name);
+-	if (!d_name)
+-		return;
+-
+-	stream = fopen(d_name, "r");
+-	free(d_name);
+-	if (!stream)
+-		return;
+-
+-	while ((read = getline(&line, &len, stream)) != -1) {
+-		if (line[read - 1] == '\n') {
+-			line[read - 1] = '\0';
+-			read--;
+-		}
+-		if ((size_t)read <= strlen(VERSION_KEYWORD) + 1)
+-			continue;
+-		if (strcmp(VERSION_KEYWORD, line) > 0)
+-			continue;
+-		if (!isblank(line[strlen(VERSION_KEYWORD)]))
+-			continue;
+-		/* skip blanks */
+-		v->offset = strlen(VERSION_KEYWORD) + 1;
+-		while (v->offset < read - 1 && isblank(line[v->offset]))
+-			v->offset++;
+-		if (isblank(line[v->offset]))
+-			/*
+-			 * all characters after the keyword
+-			 * are blanks. Invalid version
+-			 */
+-			continue;
+-		v->line = line;
+-		fclose(stream);
+-		return;
+-	}
+-	free(line);
+-	fclose(stream);
+-}
+-
+-static void put_version(struct version *v)
+-{
+-	free(v->line);
+-}
+-
+-/**
+- * Check version in bls file represented by ENT.
+- * Return 1 if version is valid. Otherwise return 0
+- */
+-static int bls_filter_by_versions(const struct dirent *ent)
+-{
+-	struct version v;
+-
+-	if (bls_filter_by_names(ent) == 0)
+-		return 0;
+-
+-	get_version(ent, &v);
+-	if (v.line) {
+-		put_version(&v);
+-		return 1;
+-	}
+-	return 0;
+-}
+-
+ 
+ static int
+-bls_sort_by_names(const struct dirent **ent_a, const struct dirent **ent_b)
++bls_sort(const struct dirent **ent_a, const struct dirent **ent_b)
+ {
+ 	return strverscmp((*ent_a)->d_name, (*ent_b)->d_name);
+ }
+ 
+-static int
+-bls_sort_by_versions(const struct dirent **ent_a, const struct dirent **ent_b)
+-{
+-	struct version v1, v2;
+-	int ret;
+-
+-	get_version(*ent_a, &v1);
+-	get_version(*ent_b, &v2);
+-	/*
+-	 * Both versions are valid.
+-	 * It is guaranteed by bls_filter_by_versions()
+-	 */
+-	ret = strverscmp(v1.line + v1.offset, v2.line + v2.offset);
+-
+-	put_version(&v1);
+-	put_version(&v2);
+-
+-	return ret;
+-}
+ 
+ static int
+ scan_append_section_heading(struct scan_token* scan, int* index, char* name);
+@@ -1110,40 +1011,6 @@ scan_count_target_keywords(char* keyword[])
+ 	return num;
+ }
+ 
+-static int bls_scandir(struct dirent ***bls_entries)
+-{
+-	struct dirent **entries1;
+-	struct dirent **entries2;
+-	int n1, n2;
+-
+-	/* arrange by names */
+-	n1 = scandir(blsdir, &entries1,
+-		     bls_filter_by_names, bls_sort_by_names);
+-	if (n1 <= 0)
+-		return n1;
+-	/* arrange by versions */
+-	n2 = scandir(blsdir, &entries2,
+-		     bls_filter_by_versions, bls_sort_by_versions);
+-
+-	if (n2 <= 0 || n2 < n1) {
+-		/*
+-		 * failed to sort by versions,
+-		 * fall back to sorting by filenames
+-		 */
+-		*bls_entries = entries1;
+-		while (n2--)
+-			free(entries2[n2]);
+-		free(entries2);
+-		return n1;
+-	}
+-	/* use arrangement by versions */
+-	*bls_entries = entries2;
+-	while (n1--)
+-		free(entries1[n1]);
+-	free(entries1);
+-	return n2;
+-}
+-
+ int
+ scan_check_target_data(char* keyword[], int* line)
+ {
+@@ -1464,7 +1331,7 @@ int scan_bls(struct scan_token **token, int scan_size)
+ 	if (!(stat(blsdir, &sb) == 0 && S_ISDIR(sb.st_mode)))
+ 		return 0;
+ 
+-	n = bls_scandir(&bls_entries);
++	n = scandir(blsdir, &bls_entries, bls_filter, bls_sort);
+ 	if (n <= 0)
+ 		return n;
+ 
+-- 
+2.39.2
+
+
+From 692e70bcfc32a05e30146bd7077c41e0eaceff03 Mon Sep 17 00:00:00 2001
+From: Peter Jones <pjones@redhat.com>
+Date: Mon, 20 Jun 2022 17:46:59 +0200
+Subject: [PATCH 2/2] blscfg: sort like rpm nvr, not like a single version
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Peter Jones <pjones@redhat.com>
+Signed-off-by: Dan Horák <dan@danny.cz>
+---
+ zipl/src/Makefile |  1 +
+ zipl/src/scan.c   | 96 ++++++++++++++++++++++++++++++++++++++++++++++-
+ 2 files changed, 95 insertions(+), 2 deletions(-)
+
+diff --git a/zipl/src/Makefile b/zipl/src/Makefile
+index cab5655..7ec215d 100644
+--- a/zipl/src/Makefile
++++ b/zipl/src/Makefile
+@@ -9,6 +9,7 @@ ALL_LDFLAGS += -Wl,-z,noexecstack $(NO_PIE_LDFLAGS)
+ 
+ libs =  $(rootdir)/libutil/libutil.a \
+ 	$(rootdir)/libvtoc/libvtoc.a \
++	-lrpmio -lrpm
+ 
+ objects = misc.o error.o scan.o job.o boot.o bootmap.o fs-map.o disk.o \
+ 	  bootmap_header.o envblk.o install.o zipl.o
+diff --git a/zipl/src/scan.c b/zipl/src/scan.c
+index 9352f76..3327e2d 100644
+--- a/zipl/src/scan.c
++++ b/zipl/src/scan.c
+@@ -35,6 +35,8 @@
+ 
+ #include "lib/util_base.h"
+ 
++#include <rpm/rpmlib.h>
++
+ #include "boot.h"
+ #include "error.h"
+ #include "misc.h"
+@@ -655,13 +657,103 @@ bls_filter(const struct dirent *ent)
+ 	return strncmp(ent->d_name + offset, ".conf", strlen(".conf")) == 0;
+ }
+ 
++/* returns name/version/release */
++/* NULL string pointer returned if nothing found */
++static void
++split_package_string (char *package_string, char **name,
++                     char **version, char **release)
++{
++	char *package_version, *package_release;
++
++	/* Release */
++	package_release = strrchr (package_string, '-');
++
++	if (package_release != NULL)
++		*package_release++ = '\0';
++
++	*release = package_release;
++
++	/* Version */
++	package_version = strrchr(package_string, '-');
++
++	if (package_version != NULL)
++		*package_version++ = '\0';
++
++	*version = package_version;
++	/* Name */
++	*name = package_string;
++
++	/* Bubble up non-null values from release to name */
++	if (name != NULL && *name == NULL) {
++		*name = (*version == NULL ? *release : *version);
++		*version = *release;
++		*release = NULL;
++	}
++	if (*version == NULL) {
++		*version = *release;
++		*release = NULL;
++	}
++}
+ 
+ static int
+-bls_sort(const struct dirent **ent_a, const struct dirent **ent_b)
++split_cmp(char *nvr0, char *nvr1, int has_name)
++{
++	int ret = 0;
++	char *name0, *version0, *release0;
++	char *name1, *version1, *release1;
++
++	split_package_string(nvr0, has_name ? &name0 : NULL, &version0, &release0);
++	split_package_string(nvr1, has_name ? &name1 : NULL, &version1, &release1);
++
++	if (has_name) {
++		ret = rpmvercmp(name0 == NULL ? "" : name0,
++                                name1 == NULL ? "" : name1);
++		if (ret != 0)
++			return ret;
++	}
++
++	ret = rpmvercmp(version0 == NULL ? "" : version0,
++                        version1 == NULL ? "" : version1);
++	if (ret != 0)
++		return ret;
++
++	ret = rpmvercmp(release0 == NULL ? "" : release0,
++                        release1 == NULL ? "" : release1);
++	return ret;
++}
++
++/* return 1: filename0 is newer than filename1 */
++/*        0: filename0 and filename1 are the same version */
++/*       -1: filename1 is newer than filename0 */
++static int bls_cmp(const char *filename0, const char *filename1)
+ {
+-	return strverscmp((*ent_a)->d_name, (*ent_b)->d_name);
++	char *id0, *id1;
++	int l, r;
++
++	id0 = strdup(filename0);
++	id1 = strdup(filename1);
++
++	l = strlen(id0);
++	if (l > 5 && strcmp(id0 + l - 5, ".conf"))
++		id0[l-5] = '\0';
++
++	l = strlen(id1);
++	if (l > 5 && strcmp(id1 + l - 5, ".conf"))
++		id1[l-5] = '\0';
++
++	r = split_cmp(id0, id1, 1);
++
++	free(id0);
++	free(id1);
++
++	return r;
+ }
+ 
++static int
++bls_sort(const struct dirent **ent_a, const struct dirent **ent_b)
++{
++	return bls_cmp((*ent_a)->d_name, (*ent_b)->d_name);
++}
+ 
+ static int
+ scan_append_section_heading(struct scan_token* scan, int* index, char* name);
+-- 
+2.39.2
+

s390-tools-zipl-invert-script-options.patch

@@ -0,0 +1,84 @@
+From 2faae5cf51c49e3f166b8526eee276dab2fe7308 Mon Sep 17 00:00:00 2001
+From: Javier Martinez Canillas <javierm@redhat.com>
+Date: Wed, 30 May 2018 14:33:25 +0200
+Subject: [PATCH] zipl-switch-to-blscfg: invert ignore-default and
+ use-version-name options
+
+These options were added because the zipl maintainers wanted a different
+default behaviour for the migration script than the one we use. Instead
+of requiring to always use these options, just invert the logic for us.
+
+Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
+---
+ scripts/zipl-switch-to-blscfg   | 16 +++++++++-------
+ scripts/zipl-switch-to-blscfg.1 |  8 ++++----
+ 2 files changed, 13 insertions(+), 11 deletions(-)
+
+diff --git a/scripts/zipl-switch-to-blscfg b/scripts/zipl-switch-to-blscfg
+index 871935c783f..d8d5eca5867 100755
+--- a/scripts/zipl-switch-to-blscfg
++++ b/scripts/zipl-switch-to-blscfg
+@@ -57,14 +57,14 @@ Options:
+ 	--backup-suffix=SUFFIX  suffix used for backup files, defaults to .bak
+ 	--bls-directory=DIR     path to generate BLS files, defaults to /boot/loader/entries
+ 	--config-file=FILE      path to zipl configuration file, defaults to /etc/zipl.conf
+-	--ignore-default	ignore the default option from the zipl configuration file
+-	--use-version-name	use the section kernel version as the BLS file name
++	--leave-default	        leave the default option from the zipl configuration file
++	--use-section-name	use the section name as the BLS file name
+ 
+ EOF
+ }
+ 
+ OPTS="$(getopt -o hv --long help,version,backup-suffix:,bls-directory:,config-file:,\
+-ignore-default,use-version-name -n \'$SCRIPTNAME\' -- "$@")"
++leave-default,use-section-name -n \'$SCRIPTNAME\' -- "$@")"
+ eval set -- "$OPTS"
+ 
+ BACKUP_SUFFIX=.bak
+@@ -73,6 +73,8 @@ CMDLINE_LINUX_DEBUG=" systemd.log_level=debug systemd.log_target=kmsg"
+ LINUX_DEBUG_VERSION_POSTFIX="_with_debugging"
+ LINUX_DEBUG_TITLE_POSTFIX=" with debugging"
+ CONFIG="/etc/zipl.conf"
++ignore_default=true
++version_name=true
+ 
+ while [ ${#} -gt 0 ]; do
+     case "$1" in
+@@ -96,11 +98,11 @@ while [ ${#} -gt 0 ]; do
+ 	    CONFIG=${2}
+ 	    shift
+ 	    ;;
+-	--ignore-default)
+-	    ignore_default=true
++	--leave-default)
++	    ignore_default=false
+ 	    ;;
+-	--use-version-name)
+-	    version_name=true
++	--use-section-name)
++	    version_name=false
+ 	    ;;
+ 	--)
+ 	    shift
+diff --git a/scripts/zipl-switch-to-blscfg.8 b/scripts/zipl-switch-to-blscfg.8
+index 6bd14d00d14..71b904ffd1c 100644
+--- a/scripts/zipl-switch-to-blscfg.8
++++ b/scripts/zipl-switch-to-blscfg.8
+@@ -37,9 +37,9 @@ The DIRECTORY where the BLS fragments will be generated. The directory is create
+ The FILE used for zipl configuration file, defaults to /etc/zipl.conf.
+ 
+ .TP
+-\fB\-\-ignore-default\fP
+-Ignore the default option from the zipl configuration file
++\fB\-\-leave-default\fP
++Leave the default option from the zipl configuration file
+ 
+ .TP
+-\fB\-\-use-version-name\fP
+-Use the section kernel version as the BLS file name
++\fB\-\-use-section-name\fP
++Use the section name as the BLS file name
+-- 
+2.17.0
+

s390.csh

@@ -1,5 +0,0 @@
-# /etc/profile.d/s390.csh - set TERM variable
-
-if ( `/sbin/consoletype stdout` == "serial" ) then
-    setenv TERM dumb
-endif

s390.sh

@@ -1,6 +0,0 @@
-# /etc/profile.d/s390.sh - set TERM variable
-
-contype=`/sbin/consoletype stdout`
-if [ "$contype" == "serial" ]; then
-    export TERM=dumb
-fi

sources

@@ -1,4 +1,2 @@
-856ecdd42ad358433eb3fcc886b58a89  s390-tools-1.8.2.tar.bz2
-71a8ee5918f2c44c385fcfe8350cdc98  cmsfs-1.1.8c.tar.gz
-ecf3ff0ac4469db7297ebd6f7607fb48  lib-zfcp-hbaapi-2.1.tar.gz
-ba42772e5b305b5e147344442cd70826  src_vipa-2.0.4.tar.gz
+SHA512 (s390-tools-2.31.0.tar.gz) = d05722dff760605baad92b25a7a9264b3c936ff851b87a02ab39604a74d02ae4e14632d9b3d83eb9cb82a14bfcbb0d40bb4797896051ed3dd36d7690abfb1c64
+SHA512 (s390-tools-2.31.0-rust-vendor.tar.xz) = f9dc2887bb2502ba6f71ef7ea807380c322a46df8c65f0fc7993f3fb4eec4da120369d3e380dbcca9b6250307da0f6236a649504d542f44730e8009ace8ed450

src_vipa-2.0.4-locations.patch

@@ -1,74 +0,0 @@
-From b2f1bf78400c686bbdbcf4c29fbbb93367abe409 Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Wed, 25 Mar 2009 09:36:08 +0100
-Subject: [PATCH] fix location of the library
-
----
- Makefile |    7 +++----
- 1 files changed, 3 insertions(+), 4 deletions(-)
-
-diff --git a/Makefile b/Makefile
-index 669b6c6..d395fa8 100644
---- a/Makefile
-+++ b/Makefile
-@@ -20,7 +20,8 @@ INSTALL=install
- VERSION=2.0.4
- 
- # the path to the .so
--SRC_VIPA_PATH=$(INSTROOT)/usr/lib
-+LIBDIR=/usr/lib
-+SRC_VIPA_PATH=$(INSTROOT)$(LIBDIR)
- # the path to the starter script
- SRC_VIPA_STARTER_PATH=$(INSTROOT)/usr/sbin
- # path to man page
-@@ -34,8 +35,7 @@ src_vipa.so: src_vipa.c
- 
- src_vipa.sh:
- 	echo '#!/bin/bash' > src_vipa.sh
--	echo 'export LD_LIBRARY_PATH=$(SRC_VIPA_PATH):$$LD_LIBRARY_PATH' >> src_vipa.sh
--	echo 'export LD_PRELOAD=$(SRC_VIPA_PATH)/src_vipa.so' >> src_vipa.sh
-+	echo 'export LD_PRELOAD=$(LIBDIR)/src_vipa.so' >> src_vipa.sh
- 	echo 'exec $$@' >> src_vipa.sh
- 	chmod 755 src_vipa.sh
- 
-@@ -44,7 +44,6 @@ install: src_vipa.so src_vipa.sh
- 	$(INSTALL) -m 755 src_vipa.so $(SRC_VIPA_PATH)
- 	$(INSTALL) -m 755 src_vipa.sh $(SRC_VIPA_STARTER_PATH)
- 	$(INSTALL) -m 644 src_vipa.8 $(SRC_VIPA_MANPAGE_PATH)/man8
--	ldconfig
- 
- clean:
- 	rm -f src_vipa.{i,s,o,sh,so} core src_vipa-$(VERSION).tar.gz
--- 
-1.6.0.6
-
-From 5c21f29f4d9e82942a997775c111280b85d01bb8 Mon Sep 17 00:00:00 2001
-From: =?utf-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
-Date: Wed, 22 Apr 2009 12:53:55 +0200
-Subject: [PATCH] make the man page path and script path configurable
-
----
- Makefile |    6 ++++--
- 1 files changed, 4 insertions(+), 2 deletions(-)
-
-diff --git a/Makefile b/Makefile
-index d395fa8..365472b 100644
---- a/Makefile
-+++ b/Makefile
-@@ -23,9 +23,11 @@ VERSION=2.0.4
- LIBDIR=/usr/lib
- SRC_VIPA_PATH=$(INSTROOT)$(LIBDIR)
- # the path to the starter script
--SRC_VIPA_STARTER_PATH=$(INSTROOT)/usr/sbin
-+SBINDIR=/usr/sbin
-+SRC_VIPA_STARTER_PATH=$(INSTROOT)$(SBINDIR)
- # path to man page
--SRC_VIPA_MANPAGE_PATH=$(INSTROOT)/usr/share/man
-+MANDIR=/usr/share/man
-+SRC_VIPA_MANPAGE_PATH=$(INSTROOT)$(MANDIR)
- 
- all: src_vipa.so src_vipa.sh
- 
--- 
-1.6.0.6
-