- rebased to 2.28.0

s390utils-2.27.0-fedora.patch

@@ -1,108 +0,0 @@
-From 493af760ed47454f5719f05a6e6316f43a3be98a Mon Sep 17 00:00:00 2001
-From: Stefan Haberland <sth@linux.ibm.com>
-Date: Mon, 8 May 2023 14:52:54 +0200
-Subject: [PATCH] zdev: add support for autoquiesce related sysfs attributes
-
-Autoquiesce is a mechanism that tells Linux to stop issuing I/Os to a
-specific DASD after certain events.
-
-Add support for configuring related DASD device attributes
-that govern the following aspects of autoquiesce:
-
-aq_mask - Configure which events lead to autoquiesce.
-aq_requeue - Configure if autoquiesce will requeue all I/O to blocklayer.
-aq_timeouts - Configure the number of timeouts before autoquiesce.
-
-Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
-Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
-Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
----
- zdev/src/dasd.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 65 insertions(+)
-
-diff --git a/zdev/src/dasd.c b/zdev/src/dasd.c
-index f9fd231..4330229 100644
---- a/zdev/src/dasd.c
-+++ b/zdev/src/dasd.c
-@@ -344,6 +344,68 @@ static struct attrib dasd_attr_fc_security = {
- 	.readonly = 1,
- };
- 
-+static struct attrib dasd_attr_aq_mask = {
-+	.name = "aq_mask",
-+	.title = "Specify autoquiesce triggers",
-+	.desc =
-+	"Use the aq_mask attribute to automatically quiesce a device and block\n"
-+	"new I/O after certain events.\n"
-+	"\n"
-+	"The value is a bitmask in decimal or hexadecimal format where each set bit\n"
-+	"indicates that the associated event shown in the table below triggers an\n"
-+	"autoquiesce.\n"
-+	"  Bit 0 is not used.\n"
-+	"  1 - 0x02 - A terminal I/O error occurred\n"
-+	"  2 - 0x04 - No active channel paths remain for the device\n"
-+	"  3 - 0x08 - A state change interrupt occurred\n"
-+	"  4 - 0x10 - The device is PPRC suspended\n"
-+	"  5 - 0x20 - No space is left on an ESE device\n"
-+	"  6 - 0x40 – The number of timeouts specified in aq_timeouts is reached\n"
-+	"  7 - 0x80 - I/O was not started because of an error in the start function\n"
-+	"\n"
-+	"For example bits 1,3 and 5 set (0010 1010) lead to an integer value of 42\n"
-+	"or 0x2A.\n"
-+	"An integer value of 0 turns off the autoquiesce function.\n",
-+	.order_cmp = ccw_online_only_order_cmp,
-+	.check = ccw_online_only_check,
-+	.defval = "0",
-+	/*
-+	 * Currently only 8 bits are defined and the max value is 255.
-+	 * This needs to be adjusted if more bits are defined.
-+	 */
-+	.accept = ACCEPT_ARRAY(ACCEPT_RANGE(0, 255)),
-+};
-+
-+static struct attrib dasd_attr_aq_requeue = {
-+	.name = "aq_requeue",
-+	.title = "Control I/O requeing during autoquiesce",
-+	.desc =
-+	"Use the aq_requeue attribute to control whether outstanding I/O\n"
-+	"operations to the blocklayer should be automatically requeued after\n"
-+	"an autoquiesce event.\n"
-+	"Valid values are 1 for requeuing, or 0 for no requeueing.\n"
-+	"Requeing the I/O requests to the blocklayer might benefit I/O\n"
-+	"in case of a copy_pair swap operation.\n",
-+	.order_cmp = ccw_online_only_order_cmp,
-+	.check = ccw_online_only_check,
-+	.defval = "0",
-+	.accept = ACCEPT_ARRAY(ACCEPT_RANGE(0, 1)),
-+};
-+
-+static struct attrib dasd_attr_aq_timeouts = {
-+	.name = "aq_timeouts",
-+	.title = "Specify timeout retry threshold",
-+	.desc =
-+	"Specify the number of sequential timeout events for an I/O operation\n"
-+	"before an autoquiesce is triggered on a device.\n"
-+	"This requires that the corresponding trigger bit 6 is set\n"
-+	"in the aq_mask attribute.\n",
-+	.order_cmp = ccw_online_only_order_cmp,
-+	.check = ccw_online_only_check,
-+	.defval = "32768",
-+	.accept = ACCEPT_ARRAY(ACCEPT_RANGE(0, 32768)),
-+};
-+
- /*
-  * DASD subtype methods.
-  */
-@@ -725,6 +787,9 @@ struct subtype dasd_subtype_eckd = {
- 		&dasd_attr_safe_offline,
- 		&dasd_attr_fc_security,
- 		&dasd_attr_copy_pair,
-+		&dasd_attr_aq_mask,
-+		&dasd_attr_aq_requeue,
-+		&dasd_attr_aq_timeouts,
- 		&internal_attr_early,
- 	),
- 	.unknown_dev_attribs	= 1,
--- 
-2.39.2
-

s390utils.spec

@@ -9,7 +9,7 @@
 
 Name:           s390utils
 Summary:        Utilities and daemons for IBM z Systems
-Version:        2.27.0
+Version:        2.28.0
 Release:        1%{?dist}
 Epoch:          2
 License:        MIT
@@ -38,7 +38,7 @@ Patch0:         s390-tools-zipl-invert-script-options.patch
 Patch1:         s390-tools-zipl-blscfg-rpm-nvr-sort.patch
 
 # upstream fixes/updates
-Patch100:       s390utils-%{version}-fedora.patch
+#Patch100:       s390utils-%%{version}-fedora.patch
 
 Requires:       s390utils-core = %{epoch}:%{version}-%{release}
 Requires:       s390utils-base = %{epoch}:%{version}-%{release}
@@ -67,10 +67,7 @@ be used together with the zSeries (s390) Linux kernel and device drivers.
 %patch 1 -p1 -b .blscfg-rpm-nvr-sort
 
 # upstream fixes/updates
-%patch 100 -p1
-
-# remove --strip from install
-find . -name Makefile | xargs sed -i 's/$(INSTALL) -s/$(INSTALL)/g'
+#%%patch 100 -p1
 
 
 %build
@@ -898,6 +895,9 @@ User-space development files for the s390/s390x architecture.
 
 
 %changelog
+* Tue Jul 11 2023 Dan Horák <dan[at]danny.cz> - 2:2.28.0-1
+- rebased to 2.28.0
+
 * Wed May 31 2023 Dan Horák <dan[at]danny.cz> - 2:2.27.0-1
 - rebased to 2.27.0
 

sources

@@ -1 +1 @@
-SHA512 (s390-tools-2.27.0.tar.gz) = 8ec83718639d17fe7b1990f4e492f1e1bdd11e814b7838c921733eeccb212f417141042118eadf1e8db498e3ff2ce0c8d404189e436cefe17d9a3dacea22429f
+SHA512 (s390-tools-2.28.0.tar.gz) = ece3a1463e2c8b8e5626a5a8956c5d1a1227661dce2e75cbda0cb30b0a3fecb3f17a0cffc631c500eb7fda4094691f9cdbc342b7b9d1b7539f1a754cae9d6a84