redhat-rpm-config/common.lua

295 lines
9.5 KiB
Lua
Raw Normal View History

forge: refactor to allow multiple calls – permit extraction of multiple archives in a single specfile – %forgemeta, %forgesetup, %forgeautosetup: add a “-z <number>” switch to select a specific set of rpm variables (for example forgeurl<number> and version<number>) – %forgemeta, %forgesetup: add a “-a” switch to process all sets in one go (makes no sense in forgeautosetup, as you need so select specific patches) – %forgemeta: deprecate the “-u” switch, use “-z” it’s better (“-u” was awkward and mainly used by the %gometa macro. %gometa will now call the lua code directly) – %forgesetup: use “-v” for verbose processing, be quiet by default, drop “-q” (align with %forgemeta, %forgeautosetup and %autosetup) – %forgesetup, %forgeautosetup: only pass flags that make sense to %setup/%autosetup; reorder to match what works in el7 – factor out complex or common lua code in separate lua modules, to allow: – code reuse in other macros without cut and pasting – direct lua routine invocation from other macros without going through a rpm macro – rpm syntax errors that point to a line in an actual lua file – %forgemeta: refactor the logic to drop as much forge-specific code as possible, use a single logic flow with tables of constants – %forgemeta: export more computed info in rpm variables, such as the %{_builddir} subdirectory an archive was extracted to (lifesaver when processing multiple archives) – %forgemeta: prepend secondary distprefixes with .S, to make clear they do not apply to the main archive – %forgemeta: add versionx to secondary distprefixes, if relevant – %forgemeta: make tar.bz2 the default archive format Caveats: – forge services implement full-release downloads via tags. However the actual syntax of such tags is not standardised. If the macro does not guess the correct tag an upstream uses for a specific release, you will need to set the tag value explicitly. – GitHub lets upstreams move their projects to new URLs, keeping the old URL active. It all works transparently *except* the top directory inside generated archives always matches the new project name (even when accessed by compatibility URLs, and even for releases that antedate the renaming). Therefore, if macro processing of a GitHub archive suddenly fails, start by checking if upstream didn’t rename itself. Multicall usage example (with “-a”) – to process a specific bloc in one of the macros use “-z <suffix>” – suffix 0 and no suffix are synonyms – therefore, calling the macros without “-a” or “-z” just works for the general use case when you have a single archive to process – caveat: forge services implement full-release %<-- %global forgeurl0 https://gitlab.com/osslugaru/lugaru Version: 1.2 %global forgeurl1 https://gitlab.com/osslugaru/lugaru %global tag1 1.1 %global forgeurl2 https://gitlab.com/osslugaru/lugaru %global commit2 68488b0a11df90dca703c67e5592b93c6a269957 %global forgeurl3 https://gitlab.com/osslugaru/lugaru %global branch3 v1.1 %global forgeurl4 https://github.com/google/trillian %global version4 1.0.8 %global forgeurl5 https://github.com/kubernetes/apiextensions-apiserver %global version5 1.9.6 %global tag5 kubernetes-%{version5} %global forgeurl6 https://github.com/jdbranham/grafana-diagram %global version6 1.3 %global commit6 440689793ab6da82019c5ee43b49438dfef976d5 %global forgeurl7 https://github.com/rethinkdb/rethinkdb-go %global version7 1.4.2 %global branch7 v1 %global forgeurl8 https://code.googlesource.com/gocloud %global version8 0.20.0 %global forgeurl9 https://code.googlesource.com/gocloud %global tag9 v0.27.0 %global forgeurl10 https://code.googlesource.com/google-api-go-client %global commit10 24928b980e6919be4c72647aacd53ebcbb8c4bab %global version10 0 %global forgeurl11 https://code.googlesource.com/google-api-go-client %global branch11 dartman %global forgeurl12 https://bitbucket.org/nielsenb/pdfocr %global version12 0.3.0 %global commit12 4f5750d202d33267094621630836f1215a5efa66 %global forgeurl13 https://bitbucket.org/nielsenb/pdfocr %global version13 0.1.4 %global tag13 v0.1.4 %global commit13 c0359843a3420769940e12019ebd68891a053bd8 %global forgeurl14 https://bitbucket.org/creachadair/shell %global commit14 3dcd505a7ca5845388111724cc2e094581e92cc6 %global forgeurl15 https://bitbucket.org/kirbyvisp/vdjpuzzle2/ %global branch15 js-edits %global commit15 36a3850eb4a04c05e0f7e29e7d0c196f373eb672 %forgemeta -ia Name: testing Release: 1%{?dist} Summary: A test package URL: %{forgeurl} License: Public domain Source0: %{forgesource0} Source1: %{forgesource1} Source2: %{forgesource2} Source3: %{forgesource3} Source4: %{forgesource4} Source5: %{forgesource5} Source6: %{forgesource6} Source7: %{forgesource7} Source8: %{forgesource8} Source9: %{forgesource9} Source10: %{forgesource10} Source11: %{forgesource11} Source12: %{forgesource12} Source13: %{forgesource13} Source14: %{forgesource14} Source15: %{forgesource15} %description A test package %prep %forgesetup -a %build exit 1 %install %files %doc %<-- Merges: https://src.fedoraproject.org/rpms/redhat-rpm-config/pull-request/35
2018-09-07 17:56:46 +00:00
-- Convenience Lua functions that can be used within rpm macros
-- Reads an rpm variable. Unlike a basic rpm.expand("{?foo}"), returns nil if
-- the variable is unset, which is convenient in lua tests and enables
-- differentiating unset variables from variables set to ""
local function read(rpmvar)
if not rpmvar or
(rpm.expand("%{" .. rpmvar .. "}") == "%{" .. rpmvar .. "}") then
return nil
else
return rpm.expand("%{?" .. rpmvar .. "}")
end
end
-- Returns true if the macro that called this function had flag set
--  for example, hasflag("z") would give the following results:
-- %foo -z bar → true
-- %foo -z → true
-- %foo → false
local function hasflag(flag)
return (rpm.expand("%{-" .. flag .. "}") ~= "")
end
-- Returns the argument passed to flag in the macro that called this function
--  for example, readflag("z") would give the following results:
-- %foo -z bar → bar
-- %foo → nil
-- %foo -z "" → empty string
-- %foo -z '' → empty string
local function readflag(flag)
if not hasflag(flag) then
return nil
else
local a = rpm.expand("%{-" .. flag .. "*}")
-- Handle "" and '' as empty strings
if (a == '""') or (a == "''") then
a = ''
end
return a
end
end
-- Sets a spec variable; echoes the result if verbose
2018-11-08 18:18:36 +00:00
local function explicitset(rpmvar, value, verbose)
forge: refactor to allow multiple calls – permit extraction of multiple archives in a single specfile – %forgemeta, %forgesetup, %forgeautosetup: add a “-z <number>” switch to select a specific set of rpm variables (for example forgeurl<number> and version<number>) – %forgemeta, %forgesetup: add a “-a” switch to process all sets in one go (makes no sense in forgeautosetup, as you need so select specific patches) – %forgemeta: deprecate the “-u” switch, use “-z” it’s better (“-u” was awkward and mainly used by the %gometa macro. %gometa will now call the lua code directly) – %forgesetup: use “-v” for verbose processing, be quiet by default, drop “-q” (align with %forgemeta, %forgeautosetup and %autosetup) – %forgesetup, %forgeautosetup: only pass flags that make sense to %setup/%autosetup; reorder to match what works in el7 – factor out complex or common lua code in separate lua modules, to allow: – code reuse in other macros without cut and pasting – direct lua routine invocation from other macros without going through a rpm macro – rpm syntax errors that point to a line in an actual lua file – %forgemeta: refactor the logic to drop as much forge-specific code as possible, use a single logic flow with tables of constants – %forgemeta: export more computed info in rpm variables, such as the %{_builddir} subdirectory an archive was extracted to (lifesaver when processing multiple archives) – %forgemeta: prepend secondary distprefixes with .S, to make clear they do not apply to the main archive – %forgemeta: add versionx to secondary distprefixes, if relevant – %forgemeta: make tar.bz2 the default archive format Caveats: – forge services implement full-release downloads via tags. However the actual syntax of such tags is not standardised. If the macro does not guess the correct tag an upstream uses for a specific release, you will need to set the tag value explicitly. – GitHub lets upstreams move their projects to new URLs, keeping the old URL active. It all works transparently *except* the top directory inside generated archives always matches the new project name (even when accessed by compatibility URLs, and even for releases that antedate the renaming). Therefore, if macro processing of a GitHub archive suddenly fails, start by checking if upstream didn’t rename itself. Multicall usage example (with “-a”) – to process a specific bloc in one of the macros use “-z <suffix>” – suffix 0 and no suffix are synonyms – therefore, calling the macros without “-a” or “-z” just works for the general use case when you have a single archive to process – caveat: forge services implement full-release %<-- %global forgeurl0 https://gitlab.com/osslugaru/lugaru Version: 1.2 %global forgeurl1 https://gitlab.com/osslugaru/lugaru %global tag1 1.1 %global forgeurl2 https://gitlab.com/osslugaru/lugaru %global commit2 68488b0a11df90dca703c67e5592b93c6a269957 %global forgeurl3 https://gitlab.com/osslugaru/lugaru %global branch3 v1.1 %global forgeurl4 https://github.com/google/trillian %global version4 1.0.8 %global forgeurl5 https://github.com/kubernetes/apiextensions-apiserver %global version5 1.9.6 %global tag5 kubernetes-%{version5} %global forgeurl6 https://github.com/jdbranham/grafana-diagram %global version6 1.3 %global commit6 440689793ab6da82019c5ee43b49438dfef976d5 %global forgeurl7 https://github.com/rethinkdb/rethinkdb-go %global version7 1.4.2 %global branch7 v1 %global forgeurl8 https://code.googlesource.com/gocloud %global version8 0.20.0 %global forgeurl9 https://code.googlesource.com/gocloud %global tag9 v0.27.0 %global forgeurl10 https://code.googlesource.com/google-api-go-client %global commit10 24928b980e6919be4c72647aacd53ebcbb8c4bab %global version10 0 %global forgeurl11 https://code.googlesource.com/google-api-go-client %global branch11 dartman %global forgeurl12 https://bitbucket.org/nielsenb/pdfocr %global version12 0.3.0 %global commit12 4f5750d202d33267094621630836f1215a5efa66 %global forgeurl13 https://bitbucket.org/nielsenb/pdfocr %global version13 0.1.4 %global tag13 v0.1.4 %global commit13 c0359843a3420769940e12019ebd68891a053bd8 %global forgeurl14 https://bitbucket.org/creachadair/shell %global commit14 3dcd505a7ca5845388111724cc2e094581e92cc6 %global forgeurl15 https://bitbucket.org/kirbyvisp/vdjpuzzle2/ %global branch15 js-edits %global commit15 36a3850eb4a04c05e0f7e29e7d0c196f373eb672 %forgemeta -ia Name: testing Release: 1%{?dist} Summary: A test package URL: %{forgeurl} License: Public domain Source0: %{forgesource0} Source1: %{forgesource1} Source2: %{forgesource2} Source3: %{forgesource3} Source4: %{forgesource4} Source5: %{forgesource5} Source6: %{forgesource6} Source7: %{forgesource7} Source8: %{forgesource8} Source9: %{forgesource9} Source10: %{forgesource10} Source11: %{forgesource11} Source12: %{forgesource12} Source13: %{forgesource13} Source14: %{forgesource14} Source15: %{forgesource15} %description A test package %prep %forgesetup -a %build exit 1 %install %files %doc %<-- Merges: https://src.fedoraproject.org/rpms/redhat-rpm-config/pull-request/35
2018-09-07 17:56:46 +00:00
local value = value
if (value == nil) or (value == "") then
value = "%{nil}"
end
rpm.define(rpmvar .. " " .. value)
if verbose then
rpm.expand("%{warn:Setting %%{" .. rpmvar .. "} = " .. value .. "}")
forge: refactor to allow multiple calls – permit extraction of multiple archives in a single specfile – %forgemeta, %forgesetup, %forgeautosetup: add a “-z <number>” switch to select a specific set of rpm variables (for example forgeurl<number> and version<number>) – %forgemeta, %forgesetup: add a “-a” switch to process all sets in one go (makes no sense in forgeautosetup, as you need so select specific patches) – %forgemeta: deprecate the “-u” switch, use “-z” it’s better (“-u” was awkward and mainly used by the %gometa macro. %gometa will now call the lua code directly) – %forgesetup: use “-v” for verbose processing, be quiet by default, drop “-q” (align with %forgemeta, %forgeautosetup and %autosetup) – %forgesetup, %forgeautosetup: only pass flags that make sense to %setup/%autosetup; reorder to match what works in el7 – factor out complex or common lua code in separate lua modules, to allow: – code reuse in other macros without cut and pasting – direct lua routine invocation from other macros without going through a rpm macro – rpm syntax errors that point to a line in an actual lua file – %forgemeta: refactor the logic to drop as much forge-specific code as possible, use a single logic flow with tables of constants – %forgemeta: export more computed info in rpm variables, such as the %{_builddir} subdirectory an archive was extracted to (lifesaver when processing multiple archives) – %forgemeta: prepend secondary distprefixes with .S, to make clear they do not apply to the main archive – %forgemeta: add versionx to secondary distprefixes, if relevant – %forgemeta: make tar.bz2 the default archive format Caveats: – forge services implement full-release downloads via tags. However the actual syntax of such tags is not standardised. If the macro does not guess the correct tag an upstream uses for a specific release, you will need to set the tag value explicitly. – GitHub lets upstreams move their projects to new URLs, keeping the old URL active. It all works transparently *except* the top directory inside generated archives always matches the new project name (even when accessed by compatibility URLs, and even for releases that antedate the renaming). Therefore, if macro processing of a GitHub archive suddenly fails, start by checking if upstream didn’t rename itself. Multicall usage example (with “-a”) – to process a specific bloc in one of the macros use “-z <suffix>” – suffix 0 and no suffix are synonyms – therefore, calling the macros without “-a” or “-z” just works for the general use case when you have a single archive to process – caveat: forge services implement full-release %<-- %global forgeurl0 https://gitlab.com/osslugaru/lugaru Version: 1.2 %global forgeurl1 https://gitlab.com/osslugaru/lugaru %global tag1 1.1 %global forgeurl2 https://gitlab.com/osslugaru/lugaru %global commit2 68488b0a11df90dca703c67e5592b93c6a269957 %global forgeurl3 https://gitlab.com/osslugaru/lugaru %global branch3 v1.1 %global forgeurl4 https://github.com/google/trillian %global version4 1.0.8 %global forgeurl5 https://github.com/kubernetes/apiextensions-apiserver %global version5 1.9.6 %global tag5 kubernetes-%{version5} %global forgeurl6 https://github.com/jdbranham/grafana-diagram %global version6 1.3 %global commit6 440689793ab6da82019c5ee43b49438dfef976d5 %global forgeurl7 https://github.com/rethinkdb/rethinkdb-go %global version7 1.4.2 %global branch7 v1 %global forgeurl8 https://code.googlesource.com/gocloud %global version8 0.20.0 %global forgeurl9 https://code.googlesource.com/gocloud %global tag9 v0.27.0 %global forgeurl10 https://code.googlesource.com/google-api-go-client %global commit10 24928b980e6919be4c72647aacd53ebcbb8c4bab %global version10 0 %global forgeurl11 https://code.googlesource.com/google-api-go-client %global branch11 dartman %global forgeurl12 https://bitbucket.org/nielsenb/pdfocr %global version12 0.3.0 %global commit12 4f5750d202d33267094621630836f1215a5efa66 %global forgeurl13 https://bitbucket.org/nielsenb/pdfocr %global version13 0.1.4 %global tag13 v0.1.4 %global commit13 c0359843a3420769940e12019ebd68891a053bd8 %global forgeurl14 https://bitbucket.org/creachadair/shell %global commit14 3dcd505a7ca5845388111724cc2e094581e92cc6 %global forgeurl15 https://bitbucket.org/kirbyvisp/vdjpuzzle2/ %global branch15 js-edits %global commit15 36a3850eb4a04c05e0f7e29e7d0c196f373eb672 %forgemeta -ia Name: testing Release: 1%{?dist} Summary: A test package URL: %{forgeurl} License: Public domain Source0: %{forgesource0} Source1: %{forgesource1} Source2: %{forgesource2} Source3: %{forgesource3} Source4: %{forgesource4} Source5: %{forgesource5} Source6: %{forgesource6} Source7: %{forgesource7} Source8: %{forgesource8} Source9: %{forgesource9} Source10: %{forgesource10} Source11: %{forgesource11} Source12: %{forgesource12} Source13: %{forgesource13} Source14: %{forgesource14} Source15: %{forgesource15} %description A test package %prep %forgesetup -a %build exit 1 %install %files %doc %<-- Merges: https://src.fedoraproject.org/rpms/redhat-rpm-config/pull-request/35
2018-09-07 17:56:46 +00:00
end
end
-- Unsets a spec variable if it is defined; echoes the result if verbose
2018-11-08 18:18:36 +00:00
local function explicitunset(rpmvar, verbose)
forge: refactor to allow multiple calls – permit extraction of multiple archives in a single specfile – %forgemeta, %forgesetup, %forgeautosetup: add a “-z <number>” switch to select a specific set of rpm variables (for example forgeurl<number> and version<number>) – %forgemeta, %forgesetup: add a “-a” switch to process all sets in one go (makes no sense in forgeautosetup, as you need so select specific patches) – %forgemeta: deprecate the “-u” switch, use “-z” it’s better (“-u” was awkward and mainly used by the %gometa macro. %gometa will now call the lua code directly) – %forgesetup: use “-v” for verbose processing, be quiet by default, drop “-q” (align with %forgemeta, %forgeautosetup and %autosetup) – %forgesetup, %forgeautosetup: only pass flags that make sense to %setup/%autosetup; reorder to match what works in el7 – factor out complex or common lua code in separate lua modules, to allow: – code reuse in other macros without cut and pasting – direct lua routine invocation from other macros without going through a rpm macro – rpm syntax errors that point to a line in an actual lua file – %forgemeta: refactor the logic to drop as much forge-specific code as possible, use a single logic flow with tables of constants – %forgemeta: export more computed info in rpm variables, such as the %{_builddir} subdirectory an archive was extracted to (lifesaver when processing multiple archives) – %forgemeta: prepend secondary distprefixes with .S, to make clear they do not apply to the main archive – %forgemeta: add versionx to secondary distprefixes, if relevant – %forgemeta: make tar.bz2 the default archive format Caveats: – forge services implement full-release downloads via tags. However the actual syntax of such tags is not standardised. If the macro does not guess the correct tag an upstream uses for a specific release, you will need to set the tag value explicitly. – GitHub lets upstreams move their projects to new URLs, keeping the old URL active. It all works transparently *except* the top directory inside generated archives always matches the new project name (even when accessed by compatibility URLs, and even for releases that antedate the renaming). Therefore, if macro processing of a GitHub archive suddenly fails, start by checking if upstream didn’t rename itself. Multicall usage example (with “-a”) – to process a specific bloc in one of the macros use “-z <suffix>” – suffix 0 and no suffix are synonyms – therefore, calling the macros without “-a” or “-z” just works for the general use case when you have a single archive to process – caveat: forge services implement full-release %<-- %global forgeurl0 https://gitlab.com/osslugaru/lugaru Version: 1.2 %global forgeurl1 https://gitlab.com/osslugaru/lugaru %global tag1 1.1 %global forgeurl2 https://gitlab.com/osslugaru/lugaru %global commit2 68488b0a11df90dca703c67e5592b93c6a269957 %global forgeurl3 https://gitlab.com/osslugaru/lugaru %global branch3 v1.1 %global forgeurl4 https://github.com/google/trillian %global version4 1.0.8 %global forgeurl5 https://github.com/kubernetes/apiextensions-apiserver %global version5 1.9.6 %global tag5 kubernetes-%{version5} %global forgeurl6 https://github.com/jdbranham/grafana-diagram %global version6 1.3 %global commit6 440689793ab6da82019c5ee43b49438dfef976d5 %global forgeurl7 https://github.com/rethinkdb/rethinkdb-go %global version7 1.4.2 %global branch7 v1 %global forgeurl8 https://code.googlesource.com/gocloud %global version8 0.20.0 %global forgeurl9 https://code.googlesource.com/gocloud %global tag9 v0.27.0 %global forgeurl10 https://code.googlesource.com/google-api-go-client %global commit10 24928b980e6919be4c72647aacd53ebcbb8c4bab %global version10 0 %global forgeurl11 https://code.googlesource.com/google-api-go-client %global branch11 dartman %global forgeurl12 https://bitbucket.org/nielsenb/pdfocr %global version12 0.3.0 %global commit12 4f5750d202d33267094621630836f1215a5efa66 %global forgeurl13 https://bitbucket.org/nielsenb/pdfocr %global version13 0.1.4 %global tag13 v0.1.4 %global commit13 c0359843a3420769940e12019ebd68891a053bd8 %global forgeurl14 https://bitbucket.org/creachadair/shell %global commit14 3dcd505a7ca5845388111724cc2e094581e92cc6 %global forgeurl15 https://bitbucket.org/kirbyvisp/vdjpuzzle2/ %global branch15 js-edits %global commit15 36a3850eb4a04c05e0f7e29e7d0c196f373eb672 %forgemeta -ia Name: testing Release: 1%{?dist} Summary: A test package URL: %{forgeurl} License: Public domain Source0: %{forgesource0} Source1: %{forgesource1} Source2: %{forgesource2} Source3: %{forgesource3} Source4: %{forgesource4} Source5: %{forgesource5} Source6: %{forgesource6} Source7: %{forgesource7} Source8: %{forgesource8} Source9: %{forgesource9} Source10: %{forgesource10} Source11: %{forgesource11} Source12: %{forgesource12} Source13: %{forgesource13} Source14: %{forgesource14} Source15: %{forgesource15} %description A test package %prep %forgesetup -a %build exit 1 %install %files %doc %<-- Merges: https://src.fedoraproject.org/rpms/redhat-rpm-config/pull-request/35
2018-09-07 17:56:46 +00:00
if (rpm.expand("%{" .. rpmvar .. "}") ~= "%{" .. rpmvar .. "}") then
rpm.define(rpmvar .. " %{nil}")
if verbose then
rpm.expand("%{warn:Unsetting %%{" .. rpmvar .. "}}")
forge: refactor to allow multiple calls – permit extraction of multiple archives in a single specfile – %forgemeta, %forgesetup, %forgeautosetup: add a “-z <number>” switch to select a specific set of rpm variables (for example forgeurl<number> and version<number>) – %forgemeta, %forgesetup: add a “-a” switch to process all sets in one go (makes no sense in forgeautosetup, as you need so select specific patches) – %forgemeta: deprecate the “-u” switch, use “-z” it’s better (“-u” was awkward and mainly used by the %gometa macro. %gometa will now call the lua code directly) – %forgesetup: use “-v” for verbose processing, be quiet by default, drop “-q” (align with %forgemeta, %forgeautosetup and %autosetup) – %forgesetup, %forgeautosetup: only pass flags that make sense to %setup/%autosetup; reorder to match what works in el7 – factor out complex or common lua code in separate lua modules, to allow: – code reuse in other macros without cut and pasting – direct lua routine invocation from other macros without going through a rpm macro – rpm syntax errors that point to a line in an actual lua file – %forgemeta: refactor the logic to drop as much forge-specific code as possible, use a single logic flow with tables of constants – %forgemeta: export more computed info in rpm variables, such as the %{_builddir} subdirectory an archive was extracted to (lifesaver when processing multiple archives) – %forgemeta: prepend secondary distprefixes with .S, to make clear they do not apply to the main archive – %forgemeta: add versionx to secondary distprefixes, if relevant – %forgemeta: make tar.bz2 the default archive format Caveats: – forge services implement full-release downloads via tags. However the actual syntax of such tags is not standardised. If the macro does not guess the correct tag an upstream uses for a specific release, you will need to set the tag value explicitly. – GitHub lets upstreams move their projects to new URLs, keeping the old URL active. It all works transparently *except* the top directory inside generated archives always matches the new project name (even when accessed by compatibility URLs, and even for releases that antedate the renaming). Therefore, if macro processing of a GitHub archive suddenly fails, start by checking if upstream didn’t rename itself. Multicall usage example (with “-a”) – to process a specific bloc in one of the macros use “-z <suffix>” – suffix 0 and no suffix are synonyms – therefore, calling the macros without “-a” or “-z” just works for the general use case when you have a single archive to process – caveat: forge services implement full-release %<-- %global forgeurl0 https://gitlab.com/osslugaru/lugaru Version: 1.2 %global forgeurl1 https://gitlab.com/osslugaru/lugaru %global tag1 1.1 %global forgeurl2 https://gitlab.com/osslugaru/lugaru %global commit2 68488b0a11df90dca703c67e5592b93c6a269957 %global forgeurl3 https://gitlab.com/osslugaru/lugaru %global branch3 v1.1 %global forgeurl4 https://github.com/google/trillian %global version4 1.0.8 %global forgeurl5 https://github.com/kubernetes/apiextensions-apiserver %global version5 1.9.6 %global tag5 kubernetes-%{version5} %global forgeurl6 https://github.com/jdbranham/grafana-diagram %global version6 1.3 %global commit6 440689793ab6da82019c5ee43b49438dfef976d5 %global forgeurl7 https://github.com/rethinkdb/rethinkdb-go %global version7 1.4.2 %global branch7 v1 %global forgeurl8 https://code.googlesource.com/gocloud %global version8 0.20.0 %global forgeurl9 https://code.googlesource.com/gocloud %global tag9 v0.27.0 %global forgeurl10 https://code.googlesource.com/google-api-go-client %global commit10 24928b980e6919be4c72647aacd53ebcbb8c4bab %global version10 0 %global forgeurl11 https://code.googlesource.com/google-api-go-client %global branch11 dartman %global forgeurl12 https://bitbucket.org/nielsenb/pdfocr %global version12 0.3.0 %global commit12 4f5750d202d33267094621630836f1215a5efa66 %global forgeurl13 https://bitbucket.org/nielsenb/pdfocr %global version13 0.1.4 %global tag13 v0.1.4 %global commit13 c0359843a3420769940e12019ebd68891a053bd8 %global forgeurl14 https://bitbucket.org/creachadair/shell %global commit14 3dcd505a7ca5845388111724cc2e094581e92cc6 %global forgeurl15 https://bitbucket.org/kirbyvisp/vdjpuzzle2/ %global branch15 js-edits %global commit15 36a3850eb4a04c05e0f7e29e7d0c196f373eb672 %forgemeta -ia Name: testing Release: 1%{?dist} Summary: A test package URL: %{forgeurl} License: Public domain Source0: %{forgesource0} Source1: %{forgesource1} Source2: %{forgesource2} Source3: %{forgesource3} Source4: %{forgesource4} Source5: %{forgesource5} Source6: %{forgesource6} Source7: %{forgesource7} Source8: %{forgesource8} Source9: %{forgesource9} Source10: %{forgesource10} Source11: %{forgesource11} Source12: %{forgesource12} Source13: %{forgesource13} Source14: %{forgesource14} Source15: %{forgesource15} %description A test package %prep %forgesetup -a %build exit 1 %install %files %doc %<-- Merges: https://src.fedoraproject.org/rpms/redhat-rpm-config/pull-request/35
2018-09-07 17:56:46 +00:00
end
end
end
-- Sets a spec variable, if not already set; echoes the result if verbose
2018-11-08 18:18:36 +00:00
local function safeset(rpmvar, value, verbose)
forge: refactor to allow multiple calls – permit extraction of multiple archives in a single specfile – %forgemeta, %forgesetup, %forgeautosetup: add a “-z <number>” switch to select a specific set of rpm variables (for example forgeurl<number> and version<number>) – %forgemeta, %forgesetup: add a “-a” switch to process all sets in one go (makes no sense in forgeautosetup, as you need so select specific patches) – %forgemeta: deprecate the “-u” switch, use “-z” it’s better (“-u” was awkward and mainly used by the %gometa macro. %gometa will now call the lua code directly) – %forgesetup: use “-v” for verbose processing, be quiet by default, drop “-q” (align with %forgemeta, %forgeautosetup and %autosetup) – %forgesetup, %forgeautosetup: only pass flags that make sense to %setup/%autosetup; reorder to match what works in el7 – factor out complex or common lua code in separate lua modules, to allow: – code reuse in other macros without cut and pasting – direct lua routine invocation from other macros without going through a rpm macro – rpm syntax errors that point to a line in an actual lua file – %forgemeta: refactor the logic to drop as much forge-specific code as possible, use a single logic flow with tables of constants – %forgemeta: export more computed info in rpm variables, such as the %{_builddir} subdirectory an archive was extracted to (lifesaver when processing multiple archives) – %forgemeta: prepend secondary distprefixes with .S, to make clear they do not apply to the main archive – %forgemeta: add versionx to secondary distprefixes, if relevant – %forgemeta: make tar.bz2 the default archive format Caveats: – forge services implement full-release downloads via tags. However the actual syntax of such tags is not standardised. If the macro does not guess the correct tag an upstream uses for a specific release, you will need to set the tag value explicitly. – GitHub lets upstreams move their projects to new URLs, keeping the old URL active. It all works transparently *except* the top directory inside generated archives always matches the new project name (even when accessed by compatibility URLs, and even for releases that antedate the renaming). Therefore, if macro processing of a GitHub archive suddenly fails, start by checking if upstream didn’t rename itself. Multicall usage example (with “-a”) – to process a specific bloc in one of the macros use “-z <suffix>” – suffix 0 and no suffix are synonyms – therefore, calling the macros without “-a” or “-z” just works for the general use case when you have a single archive to process – caveat: forge services implement full-release %<-- %global forgeurl0 https://gitlab.com/osslugaru/lugaru Version: 1.2 %global forgeurl1 https://gitlab.com/osslugaru/lugaru %global tag1 1.1 %global forgeurl2 https://gitlab.com/osslugaru/lugaru %global commit2 68488b0a11df90dca703c67e5592b93c6a269957 %global forgeurl3 https://gitlab.com/osslugaru/lugaru %global branch3 v1.1 %global forgeurl4 https://github.com/google/trillian %global version4 1.0.8 %global forgeurl5 https://github.com/kubernetes/apiextensions-apiserver %global version5 1.9.6 %global tag5 kubernetes-%{version5} %global forgeurl6 https://github.com/jdbranham/grafana-diagram %global version6 1.3 %global commit6 440689793ab6da82019c5ee43b49438dfef976d5 %global forgeurl7 https://github.com/rethinkdb/rethinkdb-go %global version7 1.4.2 %global branch7 v1 %global forgeurl8 https://code.googlesource.com/gocloud %global version8 0.20.0 %global forgeurl9 https://code.googlesource.com/gocloud %global tag9 v0.27.0 %global forgeurl10 https://code.googlesource.com/google-api-go-client %global commit10 24928b980e6919be4c72647aacd53ebcbb8c4bab %global version10 0 %global forgeurl11 https://code.googlesource.com/google-api-go-client %global branch11 dartman %global forgeurl12 https://bitbucket.org/nielsenb/pdfocr %global version12 0.3.0 %global commit12 4f5750d202d33267094621630836f1215a5efa66 %global forgeurl13 https://bitbucket.org/nielsenb/pdfocr %global version13 0.1.4 %global tag13 v0.1.4 %global commit13 c0359843a3420769940e12019ebd68891a053bd8 %global forgeurl14 https://bitbucket.org/creachadair/shell %global commit14 3dcd505a7ca5845388111724cc2e094581e92cc6 %global forgeurl15 https://bitbucket.org/kirbyvisp/vdjpuzzle2/ %global branch15 js-edits %global commit15 36a3850eb4a04c05e0f7e29e7d0c196f373eb672 %forgemeta -ia Name: testing Release: 1%{?dist} Summary: A test package URL: %{forgeurl} License: Public domain Source0: %{forgesource0} Source1: %{forgesource1} Source2: %{forgesource2} Source3: %{forgesource3} Source4: %{forgesource4} Source5: %{forgesource5} Source6: %{forgesource6} Source7: %{forgesource7} Source8: %{forgesource8} Source9: %{forgesource9} Source10: %{forgesource10} Source11: %{forgesource11} Source12: %{forgesource12} Source13: %{forgesource13} Source14: %{forgesource14} Source15: %{forgesource15} %description A test package %prep %forgesetup -a %build exit 1 %install %files %doc %<-- Merges: https://src.fedoraproject.org/rpms/redhat-rpm-config/pull-request/35
2018-09-07 17:56:46 +00:00
if (rpm.expand("%{" .. rpmvar .. "}") == "%{" .. rpmvar .. "}") then
explicitset(rpmvar,value,verbose)
end
end
-- Aliases a list of rpm variables to the same variables suffixed with 0 (and
-- vice versa); echoes the result if verbose
2018-11-08 18:18:36 +00:00
local function zalias(rpmvars, verbose)
forge: refactor to allow multiple calls – permit extraction of multiple archives in a single specfile – %forgemeta, %forgesetup, %forgeautosetup: add a “-z <number>” switch to select a specific set of rpm variables (for example forgeurl<number> and version<number>) – %forgemeta, %forgesetup: add a “-a” switch to process all sets in one go (makes no sense in forgeautosetup, as you need so select specific patches) – %forgemeta: deprecate the “-u” switch, use “-z” it’s better (“-u” was awkward and mainly used by the %gometa macro. %gometa will now call the lua code directly) – %forgesetup: use “-v” for verbose processing, be quiet by default, drop “-q” (align with %forgemeta, %forgeautosetup and %autosetup) – %forgesetup, %forgeautosetup: only pass flags that make sense to %setup/%autosetup; reorder to match what works in el7 – factor out complex or common lua code in separate lua modules, to allow: – code reuse in other macros without cut and pasting – direct lua routine invocation from other macros without going through a rpm macro – rpm syntax errors that point to a line in an actual lua file – %forgemeta: refactor the logic to drop as much forge-specific code as possible, use a single logic flow with tables of constants – %forgemeta: export more computed info in rpm variables, such as the %{_builddir} subdirectory an archive was extracted to (lifesaver when processing multiple archives) – %forgemeta: prepend secondary distprefixes with .S, to make clear they do not apply to the main archive – %forgemeta: add versionx to secondary distprefixes, if relevant – %forgemeta: make tar.bz2 the default archive format Caveats: – forge services implement full-release downloads via tags. However the actual syntax of such tags is not standardised. If the macro does not guess the correct tag an upstream uses for a specific release, you will need to set the tag value explicitly. – GitHub lets upstreams move their projects to new URLs, keeping the old URL active. It all works transparently *except* the top directory inside generated archives always matches the new project name (even when accessed by compatibility URLs, and even for releases that antedate the renaming). Therefore, if macro processing of a GitHub archive suddenly fails, start by checking if upstream didn’t rename itself. Multicall usage example (with “-a”) – to process a specific bloc in one of the macros use “-z <suffix>” – suffix 0 and no suffix are synonyms – therefore, calling the macros without “-a” or “-z” just works for the general use case when you have a single archive to process – caveat: forge services implement full-release %<-- %global forgeurl0 https://gitlab.com/osslugaru/lugaru Version: 1.2 %global forgeurl1 https://gitlab.com/osslugaru/lugaru %global tag1 1.1 %global forgeurl2 https://gitlab.com/osslugaru/lugaru %global commit2 68488b0a11df90dca703c67e5592b93c6a269957 %global forgeurl3 https://gitlab.com/osslugaru/lugaru %global branch3 v1.1 %global forgeurl4 https://github.com/google/trillian %global version4 1.0.8 %global forgeurl5 https://github.com/kubernetes/apiextensions-apiserver %global version5 1.9.6 %global tag5 kubernetes-%{version5} %global forgeurl6 https://github.com/jdbranham/grafana-diagram %global version6 1.3 %global commit6 440689793ab6da82019c5ee43b49438dfef976d5 %global forgeurl7 https://github.com/rethinkdb/rethinkdb-go %global version7 1.4.2 %global branch7 v1 %global forgeurl8 https://code.googlesource.com/gocloud %global version8 0.20.0 %global forgeurl9 https://code.googlesource.com/gocloud %global tag9 v0.27.0 %global forgeurl10 https://code.googlesource.com/google-api-go-client %global commit10 24928b980e6919be4c72647aacd53ebcbb8c4bab %global version10 0 %global forgeurl11 https://code.googlesource.com/google-api-go-client %global branch11 dartman %global forgeurl12 https://bitbucket.org/nielsenb/pdfocr %global version12 0.3.0 %global commit12 4f5750d202d33267094621630836f1215a5efa66 %global forgeurl13 https://bitbucket.org/nielsenb/pdfocr %global version13 0.1.4 %global tag13 v0.1.4 %global commit13 c0359843a3420769940e12019ebd68891a053bd8 %global forgeurl14 https://bitbucket.org/creachadair/shell %global commit14 3dcd505a7ca5845388111724cc2e094581e92cc6 %global forgeurl15 https://bitbucket.org/kirbyvisp/vdjpuzzle2/ %global branch15 js-edits %global commit15 36a3850eb4a04c05e0f7e29e7d0c196f373eb672 %forgemeta -ia Name: testing Release: 1%{?dist} Summary: A test package URL: %{forgeurl} License: Public domain Source0: %{forgesource0} Source1: %{forgesource1} Source2: %{forgesource2} Source3: %{forgesource3} Source4: %{forgesource4} Source5: %{forgesource5} Source6: %{forgesource6} Source7: %{forgesource7} Source8: %{forgesource8} Source9: %{forgesource9} Source10: %{forgesource10} Source11: %{forgesource11} Source12: %{forgesource12} Source13: %{forgesource13} Source14: %{forgesource14} Source15: %{forgesource15} %description A test package %prep %forgesetup -a %build exit 1 %install %files %doc %<-- Merges: https://src.fedoraproject.org/rpms/redhat-rpm-config/pull-request/35
2018-09-07 17:56:46 +00:00
for _, sfx in ipairs({{"","0"},{"0",""}}) do
for _, rpmvar in ipairs(rpmvars) do
local toalias = "%{?" .. rpmvar .. sfx[1] .. "}"
if (rpm.expand(toalias) ~= "") then
safeset(rpmvar .. sfx[2], toalias, verbose)
end
end
end
end
2018-11-08 18:18:36 +00:00
-- Takes a list of rpm variable roots and a suffix and alias current<root> to
-- <root><suffix> if it resolves to something not empty
local function setcurrent(rpmvars, suffix, verbose)
for _, rpmvar in ipairs(rpmvars) do
if (rpm.expand("%{?" .. rpmvar .. suffix .. "}") ~= "") then
explicitset( "current" .. rpmvar, "%{" .. rpmvar .. suffix .. "}", verbose)
else
explicitunset("current" .. rpmvar, verbose)
end
end
end
forge: refactor to allow multiple calls – permit extraction of multiple archives in a single specfile – %forgemeta, %forgesetup, %forgeautosetup: add a “-z <number>” switch to select a specific set of rpm variables (for example forgeurl<number> and version<number>) – %forgemeta, %forgesetup: add a “-a” switch to process all sets in one go (makes no sense in forgeautosetup, as you need so select specific patches) – %forgemeta: deprecate the “-u” switch, use “-z” it’s better (“-u” was awkward and mainly used by the %gometa macro. %gometa will now call the lua code directly) – %forgesetup: use “-v” for verbose processing, be quiet by default, drop “-q” (align with %forgemeta, %forgeautosetup and %autosetup) – %forgesetup, %forgeautosetup: only pass flags that make sense to %setup/%autosetup; reorder to match what works in el7 – factor out complex or common lua code in separate lua modules, to allow: – code reuse in other macros without cut and pasting – direct lua routine invocation from other macros without going through a rpm macro – rpm syntax errors that point to a line in an actual lua file – %forgemeta: refactor the logic to drop as much forge-specific code as possible, use a single logic flow with tables of constants – %forgemeta: export more computed info in rpm variables, such as the %{_builddir} subdirectory an archive was extracted to (lifesaver when processing multiple archives) – %forgemeta: prepend secondary distprefixes with .S, to make clear they do not apply to the main archive – %forgemeta: add versionx to secondary distprefixes, if relevant – %forgemeta: make tar.bz2 the default archive format Caveats: – forge services implement full-release downloads via tags. However the actual syntax of such tags is not standardised. If the macro does not guess the correct tag an upstream uses for a specific release, you will need to set the tag value explicitly. – GitHub lets upstreams move their projects to new URLs, keeping the old URL active. It all works transparently *except* the top directory inside generated archives always matches the new project name (even when accessed by compatibility URLs, and even for releases that antedate the renaming). Therefore, if macro processing of a GitHub archive suddenly fails, start by checking if upstream didn’t rename itself. Multicall usage example (with “-a”) – to process a specific bloc in one of the macros use “-z <suffix>” – suffix 0 and no suffix are synonyms – therefore, calling the macros without “-a” or “-z” just works for the general use case when you have a single archive to process – caveat: forge services implement full-release %<-- %global forgeurl0 https://gitlab.com/osslugaru/lugaru Version: 1.2 %global forgeurl1 https://gitlab.com/osslugaru/lugaru %global tag1 1.1 %global forgeurl2 https://gitlab.com/osslugaru/lugaru %global commit2 68488b0a11df90dca703c67e5592b93c6a269957 %global forgeurl3 https://gitlab.com/osslugaru/lugaru %global branch3 v1.1 %global forgeurl4 https://github.com/google/trillian %global version4 1.0.8 %global forgeurl5 https://github.com/kubernetes/apiextensions-apiserver %global version5 1.9.6 %global tag5 kubernetes-%{version5} %global forgeurl6 https://github.com/jdbranham/grafana-diagram %global version6 1.3 %global commit6 440689793ab6da82019c5ee43b49438dfef976d5 %global forgeurl7 https://github.com/rethinkdb/rethinkdb-go %global version7 1.4.2 %global branch7 v1 %global forgeurl8 https://code.googlesource.com/gocloud %global version8 0.20.0 %global forgeurl9 https://code.googlesource.com/gocloud %global tag9 v0.27.0 %global forgeurl10 https://code.googlesource.com/google-api-go-client %global commit10 24928b980e6919be4c72647aacd53ebcbb8c4bab %global version10 0 %global forgeurl11 https://code.googlesource.com/google-api-go-client %global branch11 dartman %global forgeurl12 https://bitbucket.org/nielsenb/pdfocr %global version12 0.3.0 %global commit12 4f5750d202d33267094621630836f1215a5efa66 %global forgeurl13 https://bitbucket.org/nielsenb/pdfocr %global version13 0.1.4 %global tag13 v0.1.4 %global commit13 c0359843a3420769940e12019ebd68891a053bd8 %global forgeurl14 https://bitbucket.org/creachadair/shell %global commit14 3dcd505a7ca5845388111724cc2e094581e92cc6 %global forgeurl15 https://bitbucket.org/kirbyvisp/vdjpuzzle2/ %global branch15 js-edits %global commit15 36a3850eb4a04c05e0f7e29e7d0c196f373eb672 %forgemeta -ia Name: testing Release: 1%{?dist} Summary: A test package URL: %{forgeurl} License: Public domain Source0: %{forgesource0} Source1: %{forgesource1} Source2: %{forgesource2} Source3: %{forgesource3} Source4: %{forgesource4} Source5: %{forgesource5} Source6: %{forgesource6} Source7: %{forgesource7} Source8: %{forgesource8} Source9: %{forgesource9} Source10: %{forgesource10} Source11: %{forgesource11} Source12: %{forgesource12} Source13: %{forgesource13} Source14: %{forgesource14} Source15: %{forgesource15} %description A test package %prep %forgesetup -a %build exit 1 %install %files %doc %<-- Merges: https://src.fedoraproject.org/rpms/redhat-rpm-config/pull-request/35
2018-09-07 17:56:46 +00:00
-- Echo the list of rpm variables, with suffix, if set
local function echovars(rpmvars, suffix)
for _, rpmvar in ipairs(rpmvars) do
rpmvar = rpmvar .. suffix
local header = string.sub(" " .. rpmvar .. ": ",1,21)
rpm.expand("%{?" .. rpmvar .. ":%{echo:" .. header .. "%{?" .. rpmvar .. "}}}")
end
end
-- Returns an array, indexed by suffix, containing the non-empy values of
-- <rpmvar><suffix>, with suffix an integer string or the empty string
local function getsuffixed(rpmvar)
local suffixes = {}
zalias({rpmvar})
for suffix=0,9999 do
local value = rpm.expand("%{?" .. rpmvar .. suffix .. "}")
if (value ~= "") then
suffixes[tostring(suffix)] = value
end
end
-- rpm convention is to alias no suffix to zero suffix
-- only add no suffix if zero suffix is different
local value = rpm.expand("%{?" .. rpmvar .. "}")
if (value ~= "") and (value ~= suffixes["0"]) then
suffixes[""] = value
end
return suffixes
end
-- Returns the list of suffixes, including the empty string, for which
-- <rpmvar><suffix> is set to a non empty value
local function getsuffixes(rpmvar)
suffixes = {}
for suffix in pairs(getsuffixed(rpmvar)) do
table.insert(suffixes,suffix)
end
table.sort(suffixes,
function(a,b) return (tonumber(a) or 0) < (tonumber(b) or 0) end)
return suffixes
end
-- Returns the suffix for which <rpmvar><suffix> has a non-empty value that
-- matches best the beginning of the value string
local function getbestsuffix(rpmvar, value)
local best = nil
local currentmatch = ""
for suffix, setvalue in pairs(getsuffixed(rpmvar)) do
if (string.len(setvalue) > string.len(currentmatch)) and
(string.find(value, "^" .. setvalue)) then
currentmatch = setvalue
best = suffix
end
end
return best
end
-- %writevars core
2018-11-08 18:18:36 +00:00
local function writevars(macrofile, rpmvars)
2018-11-08 18:12:25 +00:00
for _, rpmvar in ipairs(rpmvars) do
print("sed -i 's\029" .. string.upper("@@" .. rpmvar .. "@@") ..
"\029" .. rpm.expand( "%{" .. rpmvar .. "}" ) ..
"\029g' " .. macrofile .. "\n")
end
end
2018-11-08 18:21:06 +00:00
-- https://github.com/rpm-software-management/rpm/issues/566
-- Reformat a text intended to be used used in a package description, removing
-- rpm macro generation artefacts.
-- remove leading and ending empty lines
-- trim intermediary empty lines to a single line
-- fold on spaces
-- Should really be a %%{wordwrap:…} verb
local function wordwrap(text)
text = rpm.expand(text .. "\n")
text = string.gsub(text, "\t", " ")
text = string.gsub(text, "\r", "\n")
2018-11-08 18:21:06 +00:00
text = string.gsub(text, " +\n", "\n")
text = string.gsub(text, "\n+\n", "\n\n")
text = string.gsub(text, "^\n", "")
text = string.gsub(text, "\n( *)[-*—][  ]+", "\n%1 ")
output = ""
for line in string.gmatch(text, "[^\n]*\n") do
local pos = 0
local advance = ""
for word in string.gmatch(line, "%s*[^%s]*\n?") do
local wl, bad = utf8.len(word)
if not wl then
print("%{warn:Invalid UTF-8 sequence detected in:}" ..
"%{warn:" .. word .. "}" ..
"%{warn:It may produce unexpected results.}")
2018-11-08 18:21:06 +00:00
wl = bad
end
if (pos == 0) then
advance, n = string.gsub(word, "^(%s* ).*", "%1")
if (n == 0) then
advance = string.gsub(word, "^(%s*).*", "%1")
end
advance = string.gsub(advance, " ", " ")
2018-11-08 18:21:06 +00:00
pos = pos + wl
elseif (pos + wl < 81) or
((pos + wl == 81) and string.match(word, "\n$")) then
2018-11-08 18:21:06 +00:00
pos = pos + wl
else
word = advance .. string.gsub(word, "^%s*", "")
output = output .. "\n"
pos = utf8.len(word)
end
output = output .. word
if pos > 80 then
pos = 0
if not string.match(word, "\n$") then
output = output .. "\n"
end
end
end
end
output = string.gsub(output, "\n*$", "\n")
return output
end
-- Because rpmbuild will fail if a subpackage is declared before the source
-- package itself, provide a source package declaration shell as fallback.
local function srcpkg(verbose)
if verbose then
rpm.expand([[
%{echo:Creating a header for the SRPM from %%{source_name}, %%{source_summary} and}
%{echo:%%{source_description}. If that is not the intended result, please declare the}
%{echo:SRPM header and set %%{source_name} in your spec file before calling a macro}
%{echo:that creates other package headers.}
]])
end
print(rpm.expand([[
Name: %{source_name}
Summary: %{source_summary}
%description
%wordwrap -v source_description
]]))
explicitset("currentname", "%{source_name}", verbose)
end
-- %new_package core
local function new_package(source_name, pkg_name, name_suffix, first, verbose)
-- Safety net when the wrapper is used in conjunction with traditional syntax
if (not first) and (not source_name) then
rpm.expand([[
%{warn:Something already set a package name. However, %%{source_name} is not set.}
%{warn:Please set %%{source_name} to the SRPM name to ensure reliable processing.}
]])
if name_suffix then
print(rpm.expand("%package " .. name_suffix))
else
print(rpm.expand("%package -n " .. pkg_name))
end
return
end
-- New processing
if not (pkg_name or name_suffix or source_name) then
rpm.expand([[
%{error:You need to set %%{source_name} or provide explicit package naming!}
]])
end
if name_suffix then
print(rpm.expand("%package " .. name_suffix))
explicitset("currentname", "%{source_name}-" .. name_suffix, verbose)
else
if not source_name then
source_name = pkg_name
end
if (pkg_name == source_name) then
safeset("source_name", source_name, verbose)
print(rpm.expand("Name: %{source_name}"))
else
if source_name and first then
srcpkg(verbose)
end
print(rpm.expand("%package -n " .. pkg_name))
end
explicitset("currentname", pkg_name, verbose)
end
end
forge: refactor to allow multiple calls – permit extraction of multiple archives in a single specfile – %forgemeta, %forgesetup, %forgeautosetup: add a “-z <number>” switch to select a specific set of rpm variables (for example forgeurl<number> and version<number>) – %forgemeta, %forgesetup: add a “-a” switch to process all sets in one go (makes no sense in forgeautosetup, as you need so select specific patches) – %forgemeta: deprecate the “-u” switch, use “-z” it’s better (“-u” was awkward and mainly used by the %gometa macro. %gometa will now call the lua code directly) – %forgesetup: use “-v” for verbose processing, be quiet by default, drop “-q” (align with %forgemeta, %forgeautosetup and %autosetup) – %forgesetup, %forgeautosetup: only pass flags that make sense to %setup/%autosetup; reorder to match what works in el7 – factor out complex or common lua code in separate lua modules, to allow: – code reuse in other macros without cut and pasting – direct lua routine invocation from other macros without going through a rpm macro – rpm syntax errors that point to a line in an actual lua file – %forgemeta: refactor the logic to drop as much forge-specific code as possible, use a single logic flow with tables of constants – %forgemeta: export more computed info in rpm variables, such as the %{_builddir} subdirectory an archive was extracted to (lifesaver when processing multiple archives) – %forgemeta: prepend secondary distprefixes with .S, to make clear they do not apply to the main archive – %forgemeta: add versionx to secondary distprefixes, if relevant – %forgemeta: make tar.bz2 the default archive format Caveats: – forge services implement full-release downloads via tags. However the actual syntax of such tags is not standardised. If the macro does not guess the correct tag an upstream uses for a specific release, you will need to set the tag value explicitly. – GitHub lets upstreams move their projects to new URLs, keeping the old URL active. It all works transparently *except* the top directory inside generated archives always matches the new project name (even when accessed by compatibility URLs, and even for releases that antedate the renaming). Therefore, if macro processing of a GitHub archive suddenly fails, start by checking if upstream didn’t rename itself. Multicall usage example (with “-a”) – to process a specific bloc in one of the macros use “-z <suffix>” – suffix 0 and no suffix are synonyms – therefore, calling the macros without “-a” or “-z” just works for the general use case when you have a single archive to process – caveat: forge services implement full-release %<-- %global forgeurl0 https://gitlab.com/osslugaru/lugaru Version: 1.2 %global forgeurl1 https://gitlab.com/osslugaru/lugaru %global tag1 1.1 %global forgeurl2 https://gitlab.com/osslugaru/lugaru %global commit2 68488b0a11df90dca703c67e5592b93c6a269957 %global forgeurl3 https://gitlab.com/osslugaru/lugaru %global branch3 v1.1 %global forgeurl4 https://github.com/google/trillian %global version4 1.0.8 %global forgeurl5 https://github.com/kubernetes/apiextensions-apiserver %global version5 1.9.6 %global tag5 kubernetes-%{version5} %global forgeurl6 https://github.com/jdbranham/grafana-diagram %global version6 1.3 %global commit6 440689793ab6da82019c5ee43b49438dfef976d5 %global forgeurl7 https://github.com/rethinkdb/rethinkdb-go %global version7 1.4.2 %global branch7 v1 %global forgeurl8 https://code.googlesource.com/gocloud %global version8 0.20.0 %global forgeurl9 https://code.googlesource.com/gocloud %global tag9 v0.27.0 %global forgeurl10 https://code.googlesource.com/google-api-go-client %global commit10 24928b980e6919be4c72647aacd53ebcbb8c4bab %global version10 0 %global forgeurl11 https://code.googlesource.com/google-api-go-client %global branch11 dartman %global forgeurl12 https://bitbucket.org/nielsenb/pdfocr %global version12 0.3.0 %global commit12 4f5750d202d33267094621630836f1215a5efa66 %global forgeurl13 https://bitbucket.org/nielsenb/pdfocr %global version13 0.1.4 %global tag13 v0.1.4 %global commit13 c0359843a3420769940e12019ebd68891a053bd8 %global forgeurl14 https://bitbucket.org/creachadair/shell %global commit14 3dcd505a7ca5845388111724cc2e094581e92cc6 %global forgeurl15 https://bitbucket.org/kirbyvisp/vdjpuzzle2/ %global branch15 js-edits %global commit15 36a3850eb4a04c05e0f7e29e7d0c196f373eb672 %forgemeta -ia Name: testing Release: 1%{?dist} Summary: A test package URL: %{forgeurl} License: Public domain Source0: %{forgesource0} Source1: %{forgesource1} Source2: %{forgesource2} Source3: %{forgesource3} Source4: %{forgesource4} Source5: %{forgesource5} Source6: %{forgesource6} Source7: %{forgesource7} Source8: %{forgesource8} Source9: %{forgesource9} Source10: %{forgesource10} Source11: %{forgesource11} Source12: %{forgesource12} Source13: %{forgesource13} Source14: %{forgesource14} Source15: %{forgesource15} %description A test package %prep %forgesetup -a %build exit 1 %install %files %doc %<-- Merges: https://src.fedoraproject.org/rpms/redhat-rpm-config/pull-request/35
2018-09-07 17:56:46 +00:00
return {
read = read,
hasflag = hasflag,
readflag = readflag,
forge: refactor to allow multiple calls – permit extraction of multiple archives in a single specfile – %forgemeta, %forgesetup, %forgeautosetup: add a “-z <number>” switch to select a specific set of rpm variables (for example forgeurl<number> and version<number>) – %forgemeta, %forgesetup: add a “-a” switch to process all sets in one go (makes no sense in forgeautosetup, as you need so select specific patches) – %forgemeta: deprecate the “-u” switch, use “-z” it’s better (“-u” was awkward and mainly used by the %gometa macro. %gometa will now call the lua code directly) – %forgesetup: use “-v” for verbose processing, be quiet by default, drop “-q” (align with %forgemeta, %forgeautosetup and %autosetup) – %forgesetup, %forgeautosetup: only pass flags that make sense to %setup/%autosetup; reorder to match what works in el7 – factor out complex or common lua code in separate lua modules, to allow: – code reuse in other macros without cut and pasting – direct lua routine invocation from other macros without going through a rpm macro – rpm syntax errors that point to a line in an actual lua file – %forgemeta: refactor the logic to drop as much forge-specific code as possible, use a single logic flow with tables of constants – %forgemeta: export more computed info in rpm variables, such as the %{_builddir} subdirectory an archive was extracted to (lifesaver when processing multiple archives) – %forgemeta: prepend secondary distprefixes with .S, to make clear they do not apply to the main archive – %forgemeta: add versionx to secondary distprefixes, if relevant – %forgemeta: make tar.bz2 the default archive format Caveats: – forge services implement full-release downloads via tags. However the actual syntax of such tags is not standardised. If the macro does not guess the correct tag an upstream uses for a specific release, you will need to set the tag value explicitly. – GitHub lets upstreams move their projects to new URLs, keeping the old URL active. It all works transparently *except* the top directory inside generated archives always matches the new project name (even when accessed by compatibility URLs, and even for releases that antedate the renaming). Therefore, if macro processing of a GitHub archive suddenly fails, start by checking if upstream didn’t rename itself. Multicall usage example (with “-a”) – to process a specific bloc in one of the macros use “-z <suffix>” – suffix 0 and no suffix are synonyms – therefore, calling the macros without “-a” or “-z” just works for the general use case when you have a single archive to process – caveat: forge services implement full-release %<-- %global forgeurl0 https://gitlab.com/osslugaru/lugaru Version: 1.2 %global forgeurl1 https://gitlab.com/osslugaru/lugaru %global tag1 1.1 %global forgeurl2 https://gitlab.com/osslugaru/lugaru %global commit2 68488b0a11df90dca703c67e5592b93c6a269957 %global forgeurl3 https://gitlab.com/osslugaru/lugaru %global branch3 v1.1 %global forgeurl4 https://github.com/google/trillian %global version4 1.0.8 %global forgeurl5 https://github.com/kubernetes/apiextensions-apiserver %global version5 1.9.6 %global tag5 kubernetes-%{version5} %global forgeurl6 https://github.com/jdbranham/grafana-diagram %global version6 1.3 %global commit6 440689793ab6da82019c5ee43b49438dfef976d5 %global forgeurl7 https://github.com/rethinkdb/rethinkdb-go %global version7 1.4.2 %global branch7 v1 %global forgeurl8 https://code.googlesource.com/gocloud %global version8 0.20.0 %global forgeurl9 https://code.googlesource.com/gocloud %global tag9 v0.27.0 %global forgeurl10 https://code.googlesource.com/google-api-go-client %global commit10 24928b980e6919be4c72647aacd53ebcbb8c4bab %global version10 0 %global forgeurl11 https://code.googlesource.com/google-api-go-client %global branch11 dartman %global forgeurl12 https://bitbucket.org/nielsenb/pdfocr %global version12 0.3.0 %global commit12 4f5750d202d33267094621630836f1215a5efa66 %global forgeurl13 https://bitbucket.org/nielsenb/pdfocr %global version13 0.1.4 %global tag13 v0.1.4 %global commit13 c0359843a3420769940e12019ebd68891a053bd8 %global forgeurl14 https://bitbucket.org/creachadair/shell %global commit14 3dcd505a7ca5845388111724cc2e094581e92cc6 %global forgeurl15 https://bitbucket.org/kirbyvisp/vdjpuzzle2/ %global branch15 js-edits %global commit15 36a3850eb4a04c05e0f7e29e7d0c196f373eb672 %forgemeta -ia Name: testing Release: 1%{?dist} Summary: A test package URL: %{forgeurl} License: Public domain Source0: %{forgesource0} Source1: %{forgesource1} Source2: %{forgesource2} Source3: %{forgesource3} Source4: %{forgesource4} Source5: %{forgesource5} Source6: %{forgesource6} Source7: %{forgesource7} Source8: %{forgesource8} Source9: %{forgesource9} Source10: %{forgesource10} Source11: %{forgesource11} Source12: %{forgesource12} Source13: %{forgesource13} Source14: %{forgesource14} Source15: %{forgesource15} %description A test package %prep %forgesetup -a %build exit 1 %install %files %doc %<-- Merges: https://src.fedoraproject.org/rpms/redhat-rpm-config/pull-request/35
2018-09-07 17:56:46 +00:00
explicitset = explicitset,
explicitunset = explicitunset,
safeset = safeset,
zalias = zalias,
2018-11-08 18:18:36 +00:00
setcurrent = setcurrent,
forge: refactor to allow multiple calls – permit extraction of multiple archives in a single specfile – %forgemeta, %forgesetup, %forgeautosetup: add a “-z <number>” switch to select a specific set of rpm variables (for example forgeurl<number> and version<number>) – %forgemeta, %forgesetup: add a “-a” switch to process all sets in one go (makes no sense in forgeautosetup, as you need so select specific patches) – %forgemeta: deprecate the “-u” switch, use “-z” it’s better (“-u” was awkward and mainly used by the %gometa macro. %gometa will now call the lua code directly) – %forgesetup: use “-v” for verbose processing, be quiet by default, drop “-q” (align with %forgemeta, %forgeautosetup and %autosetup) – %forgesetup, %forgeautosetup: only pass flags that make sense to %setup/%autosetup; reorder to match what works in el7 – factor out complex or common lua code in separate lua modules, to allow: – code reuse in other macros without cut and pasting – direct lua routine invocation from other macros without going through a rpm macro – rpm syntax errors that point to a line in an actual lua file – %forgemeta: refactor the logic to drop as much forge-specific code as possible, use a single logic flow with tables of constants – %forgemeta: export more computed info in rpm variables, such as the %{_builddir} subdirectory an archive was extracted to (lifesaver when processing multiple archives) – %forgemeta: prepend secondary distprefixes with .S, to make clear they do not apply to the main archive – %forgemeta: add versionx to secondary distprefixes, if relevant – %forgemeta: make tar.bz2 the default archive format Caveats: – forge services implement full-release downloads via tags. However the actual syntax of such tags is not standardised. If the macro does not guess the correct tag an upstream uses for a specific release, you will need to set the tag value explicitly. – GitHub lets upstreams move their projects to new URLs, keeping the old URL active. It all works transparently *except* the top directory inside generated archives always matches the new project name (even when accessed by compatibility URLs, and even for releases that antedate the renaming). Therefore, if macro processing of a GitHub archive suddenly fails, start by checking if upstream didn’t rename itself. Multicall usage example (with “-a”) – to process a specific bloc in one of the macros use “-z <suffix>” – suffix 0 and no suffix are synonyms – therefore, calling the macros without “-a” or “-z” just works for the general use case when you have a single archive to process – caveat: forge services implement full-release %<-- %global forgeurl0 https://gitlab.com/osslugaru/lugaru Version: 1.2 %global forgeurl1 https://gitlab.com/osslugaru/lugaru %global tag1 1.1 %global forgeurl2 https://gitlab.com/osslugaru/lugaru %global commit2 68488b0a11df90dca703c67e5592b93c6a269957 %global forgeurl3 https://gitlab.com/osslugaru/lugaru %global branch3 v1.1 %global forgeurl4 https://github.com/google/trillian %global version4 1.0.8 %global forgeurl5 https://github.com/kubernetes/apiextensions-apiserver %global version5 1.9.6 %global tag5 kubernetes-%{version5} %global forgeurl6 https://github.com/jdbranham/grafana-diagram %global version6 1.3 %global commit6 440689793ab6da82019c5ee43b49438dfef976d5 %global forgeurl7 https://github.com/rethinkdb/rethinkdb-go %global version7 1.4.2 %global branch7 v1 %global forgeurl8 https://code.googlesource.com/gocloud %global version8 0.20.0 %global forgeurl9 https://code.googlesource.com/gocloud %global tag9 v0.27.0 %global forgeurl10 https://code.googlesource.com/google-api-go-client %global commit10 24928b980e6919be4c72647aacd53ebcbb8c4bab %global version10 0 %global forgeurl11 https://code.googlesource.com/google-api-go-client %global branch11 dartman %global forgeurl12 https://bitbucket.org/nielsenb/pdfocr %global version12 0.3.0 %global commit12 4f5750d202d33267094621630836f1215a5efa66 %global forgeurl13 https://bitbucket.org/nielsenb/pdfocr %global version13 0.1.4 %global tag13 v0.1.4 %global commit13 c0359843a3420769940e12019ebd68891a053bd8 %global forgeurl14 https://bitbucket.org/creachadair/shell %global commit14 3dcd505a7ca5845388111724cc2e094581e92cc6 %global forgeurl15 https://bitbucket.org/kirbyvisp/vdjpuzzle2/ %global branch15 js-edits %global commit15 36a3850eb4a04c05e0f7e29e7d0c196f373eb672 %forgemeta -ia Name: testing Release: 1%{?dist} Summary: A test package URL: %{forgeurl} License: Public domain Source0: %{forgesource0} Source1: %{forgesource1} Source2: %{forgesource2} Source3: %{forgesource3} Source4: %{forgesource4} Source5: %{forgesource5} Source6: %{forgesource6} Source7: %{forgesource7} Source8: %{forgesource8} Source9: %{forgesource9} Source10: %{forgesource10} Source11: %{forgesource11} Source12: %{forgesource12} Source13: %{forgesource13} Source14: %{forgesource14} Source15: %{forgesource15} %description A test package %prep %forgesetup -a %build exit 1 %install %files %doc %<-- Merges: https://src.fedoraproject.org/rpms/redhat-rpm-config/pull-request/35
2018-09-07 17:56:46 +00:00
echovars = echovars,
getsuffixed = getsuffixed,
getsuffixes = getsuffixes,
getbestsuffix = getbestsuffix,
2018-11-08 18:12:25 +00:00
writevars = writevars,
2018-11-08 18:21:06 +00:00
wordwrap = wordwrap,
new_package = new_package,
forge: refactor to allow multiple calls – permit extraction of multiple archives in a single specfile – %forgemeta, %forgesetup, %forgeautosetup: add a “-z <number>” switch to select a specific set of rpm variables (for example forgeurl<number> and version<number>) – %forgemeta, %forgesetup: add a “-a” switch to process all sets in one go (makes no sense in forgeautosetup, as you need so select specific patches) – %forgemeta: deprecate the “-u” switch, use “-z” it’s better (“-u” was awkward and mainly used by the %gometa macro. %gometa will now call the lua code directly) – %forgesetup: use “-v” for verbose processing, be quiet by default, drop “-q” (align with %forgemeta, %forgeautosetup and %autosetup) – %forgesetup, %forgeautosetup: only pass flags that make sense to %setup/%autosetup; reorder to match what works in el7 – factor out complex or common lua code in separate lua modules, to allow: – code reuse in other macros without cut and pasting – direct lua routine invocation from other macros without going through a rpm macro – rpm syntax errors that point to a line in an actual lua file – %forgemeta: refactor the logic to drop as much forge-specific code as possible, use a single logic flow with tables of constants – %forgemeta: export more computed info in rpm variables, such as the %{_builddir} subdirectory an archive was extracted to (lifesaver when processing multiple archives) – %forgemeta: prepend secondary distprefixes with .S, to make clear they do not apply to the main archive – %forgemeta: add versionx to secondary distprefixes, if relevant – %forgemeta: make tar.bz2 the default archive format Caveats: – forge services implement full-release downloads via tags. However the actual syntax of such tags is not standardised. If the macro does not guess the correct tag an upstream uses for a specific release, you will need to set the tag value explicitly. – GitHub lets upstreams move their projects to new URLs, keeping the old URL active. It all works transparently *except* the top directory inside generated archives always matches the new project name (even when accessed by compatibility URLs, and even for releases that antedate the renaming). Therefore, if macro processing of a GitHub archive suddenly fails, start by checking if upstream didn’t rename itself. Multicall usage example (with “-a”) – to process a specific bloc in one of the macros use “-z <suffix>” – suffix 0 and no suffix are synonyms – therefore, calling the macros without “-a” or “-z” just works for the general use case when you have a single archive to process – caveat: forge services implement full-release %<-- %global forgeurl0 https://gitlab.com/osslugaru/lugaru Version: 1.2 %global forgeurl1 https://gitlab.com/osslugaru/lugaru %global tag1 1.1 %global forgeurl2 https://gitlab.com/osslugaru/lugaru %global commit2 68488b0a11df90dca703c67e5592b93c6a269957 %global forgeurl3 https://gitlab.com/osslugaru/lugaru %global branch3 v1.1 %global forgeurl4 https://github.com/google/trillian %global version4 1.0.8 %global forgeurl5 https://github.com/kubernetes/apiextensions-apiserver %global version5 1.9.6 %global tag5 kubernetes-%{version5} %global forgeurl6 https://github.com/jdbranham/grafana-diagram %global version6 1.3 %global commit6 440689793ab6da82019c5ee43b49438dfef976d5 %global forgeurl7 https://github.com/rethinkdb/rethinkdb-go %global version7 1.4.2 %global branch7 v1 %global forgeurl8 https://code.googlesource.com/gocloud %global version8 0.20.0 %global forgeurl9 https://code.googlesource.com/gocloud %global tag9 v0.27.0 %global forgeurl10 https://code.googlesource.com/google-api-go-client %global commit10 24928b980e6919be4c72647aacd53ebcbb8c4bab %global version10 0 %global forgeurl11 https://code.googlesource.com/google-api-go-client %global branch11 dartman %global forgeurl12 https://bitbucket.org/nielsenb/pdfocr %global version12 0.3.0 %global commit12 4f5750d202d33267094621630836f1215a5efa66 %global forgeurl13 https://bitbucket.org/nielsenb/pdfocr %global version13 0.1.4 %global tag13 v0.1.4 %global commit13 c0359843a3420769940e12019ebd68891a053bd8 %global forgeurl14 https://bitbucket.org/creachadair/shell %global commit14 3dcd505a7ca5845388111724cc2e094581e92cc6 %global forgeurl15 https://bitbucket.org/kirbyvisp/vdjpuzzle2/ %global branch15 js-edits %global commit15 36a3850eb4a04c05e0f7e29e7d0c196f373eb672 %forgemeta -ia Name: testing Release: 1%{?dist} Summary: A test package URL: %{forgeurl} License: Public domain Source0: %{forgesource0} Source1: %{forgesource1} Source2: %{forgesource2} Source3: %{forgesource3} Source4: %{forgesource4} Source5: %{forgesource5} Source6: %{forgesource6} Source7: %{forgesource7} Source8: %{forgesource8} Source9: %{forgesource9} Source10: %{forgesource10} Source11: %{forgesource11} Source12: %{forgesource12} Source13: %{forgesource13} Source14: %{forgesource14} Source15: %{forgesource15} %description A test package %prep %forgesetup -a %build exit 1 %install %files %doc %<-- Merges: https://src.fedoraproject.org/rpms/redhat-rpm-config/pull-request/35
2018-09-07 17:56:46 +00:00
}