From 8444d4c996120a2fc21547a784c258e639f1e8fb Mon Sep 17 00:00:00 2001 From: Ronnie Sahlberg Date: Fri, 14 Sep 2012 18:13:29 -0700 Subject: [PATCH] SCSI: Standard INQUIRY data should report HiSup flag as set. QEMU as far as I know only reports LUN numbers using the modes that are described in SAM4. As such, since all LUN numbers generated by the SCSI emulation in QEMU follow SAM4, we should set the HiSup bit in the standard INQUIRY data to indicate such. From SAM4: 4.6.3 LUNs overview All LUN formats described in this standard are hierarchical in structure even when only a single level in that hierarchy is used. The HISUP bit shall be set to one in the standard INQUIRY data (see SPC-4) when any LUN format described in this standard is used. Non-hierarchical formats are outside the scope of this standard. Signed-off-by: Ronnie Sahlberg (cherry picked from commit 1109c894052751df99962c009fd7dbae397721f5) Signed-off-by: Michael Roth --- hw/scsi-disk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c index d621852..7ed1bde 100644 --- a/hw/scsi-disk.c +++ b/hw/scsi-disk.c @@ -678,7 +678,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf) * is actually implemented, but we're good enough. */ outbuf[2] = 5; - outbuf[3] = 2; /* Format 2 */ + outbuf[3] = 2 | 0x10; /* Format 2, HiSup */ if (buflen > 36) { outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */ -- 1.7.12.1