2016-11-20: Retired because it depends on pulseaudio, which was

retired, because it was orphaned for more than six weeks.

.cvsignore

@@ -1 +0,0 @@
-qemu-0.8.2.tar.gz

Makefile

@@ -1,21 +0,0 @@
-# Makefile for source rpm: qemu
-# $Id$
-NAME := qemu
-SPECFILE = $(firstword $(wildcard *.spec))
-
-define find-makefile-common
-for d in common ../common ../../common ; do if [ -f $$d/Makefile.common ] ; then if [ -f $$d/CVS/Root -a -w $$/Makefile.common ] ; then cd $$d ; cvs -Q update ; fi ; echo "$$d/Makefile.common" ; break ; fi ; done
-endef
-
-MAKEFILE_COMMON := $(shell $(find-makefile-common))
-
-ifeq ($(MAKEFILE_COMMON),)
-# attept a checkout
-define checkout-makefile-common
-test -f CVS/Root && { cvs -Q -d $$(cat CVS/Root) checkout common && echo "common/Makefile.common" ; } || { echo "ERROR: I can't figure out how to checkout the 'common' module." ; exit -1 ; } >&2
-endef
-
-MAKEFILE_COMMON := $(shell $(checkout-makefile-common))
-endif
-
-include $(MAKEFILE_COMMON)

dead.package

@@ -0,0 +1,3 @@
+2016-11-20: Retired because it depends on pulseaudio, which was
+retired, because it was orphaned for more than six weeks.
+

qemu-0.7.0-build.patch

@@ -1,11 +0,0 @@
---- qemu-0.7.0/Makefile.target.orig	2005-04-27 21:52:05.000000000 +0100
-+++ qemu-0.7.0/Makefile.target	2005-04-30 11:01:41.000000000 +0100
-@@ -463,7 +463,7 @@
- 
- install: all 
- ifneq ($(PROGS),)
--	$(INSTALL) -m 755 -s $(PROGS) "$(DESTDIR)$(bindir)"
-+	$(INSTALL) -m 755 $(PROGS) "$(DESTDIR)$(bindir)"
- endif
- 
- ifneq ($(wildcard .depend),)

qemu-0.8.0-sdata.patch

@@ -1,15 +0,0 @@
---- qemu-0.8.0/ppc.ld~	2005-12-19 22:51:53.000000000 +0000
-+++ qemu-0.8.0/ppc.ld	2006-03-21 16:46:58.000000000 +0000
-@@ -90,7 +90,11 @@ SECTIONS
-   /* We want the small data sections together, so single-instruction offsets
-      can access them all, and initialized data all before uninitialized, so
-      we can shorten the on-disk segment size.  */
--  .sdata     : { *(.sdata) }
-+  .sdata     :
-+  {
-+    PROVIDE (_SDA_BASE_ = 32768);
-+    *(.sdata .sdata.* .gnu.linkonce.s.*)
-+  }
-   _edata  =  .;
-   PROVIDE (edata = .);
-   __bss_start = .;

qemu-0.8.2-kernheaders.patch

@@ -1,11 +0,0 @@
-diff -Naupr qemu-0.8.2.orig/usb-linux.c qemu-0.8.2/usb-linux.c
---- qemu-0.8.2.orig/usb-linux.c	2006-07-22 19:23:34.000000000 +0200
-+++ qemu-0.8.2/usb-linux.c	2006-08-23 18:47:16.000000000 +0200
-@@ -26,7 +26,6 @@
- #if defined(__linux__)
- #include <dirent.h>
- #include <sys/ioctl.h>
--#include <linux/compiler.h>
- #include <linux/usbdevice_fs.h>
- #include <linux/version.h>
- 

qemu-0.8.2-target-sparc.patch

@@ -1,18 +0,0 @@
-diff -Naupr qemu-0.8.2.orig/target-sparc/op_helper.c qemu-0.8.2/target-sparc/op_helper.c
---- qemu-0.8.2.orig/target-sparc/op_helper.c	2006-07-22 19:23:34.000000000 +0200
-+++ qemu-0.8.2/target-sparc/op_helper.c	2006-08-24 10:58:30.000000000 +0200
-@@ -12,12 +12,12 @@ void raise_exception(int tt)
- #ifdef USE_INT_TO_FLOAT_HELPERS
- void do_fitos(void)
- {
--    FT0 = int32_to_float32(*((int32_t *)&FT1));
-+    FT0 = int32_to_float32(*((int32_t *)&FT1), &env->fp_status);
- }
- 
- void do_fitod(void)
- {
--    DT0 = int32_to_float64(*((int32_t *)&FT1));
-+    DT0 = int32_to_float64(*((int32_t *)&FT1), &env->fp_status);
- }
- #endif
- 

qemu.init

@@ -1,96 +0,0 @@
-#!/bin/sh
-#
-# qemu	Allow users to run non-native Linux programs by just clicking on them
-#	(or typing ./file.exe)
-#
-# chkconfig: 2345 35 98
-# description: Allow users to run non-native Linux programs by just clicking \
-#	       on them (or typing ./file.exe)
-
-. /etc/rc.d/init.d/functions
-RETVAL=0
-QEMU=/usr/bin
-
-start() {
-	cpu=`uname -m`
-        case "$cpu" in
-	    i386|i486|i586|i686|i86pc|BePC)
-		cpu="i386"
-		;;
-	    "Power Macintosh"|ppc|ppc64)
-		cpu="ppc"
-		;;
-	    armv4l|armv5l)
-		cpu="arm"
-		;;
-	esac
-
-	echo -n $"Registering binary handler for qemu applications"
-	/sbin/modprobe binfmt_misc &>/dev/null
-	if [ "$cpu" != i386 -a -x $QEMU/qemu-i386 -a -d /usr/qemu-i386 ] ; then
-	    echo ":qemu-i386:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff\xff:$QEMU/qemu-i386:" > /proc/sys/fs/binfmt_misc/register
-	    echo ":qemu-i486:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x06\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff\xff:$QEMU/qemu-i386:" > /proc/sys/fs/binfmt_misc/register
-	fi
-	if [ "$cpu" != arm -a -x $QEMU/qemu-arm -a -d /usr/qemu-arm ] ; then
-	    echo   ":qemu-arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff\xff:$QEMU/qemu-arm:" > /proc/sys/fs/binfmt_misc/register
-	fi
-	if [ "$cpu" != ppc -a -x $QEMU/qemu-ppc -a -d /usr/qemu-ppc ] ; then
-	    echo   ":ppc:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x14:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff\xff:$QEMU/qemu-ppc:" > /proc/sys/fs/binfmt_misc/register
-	echo do ppc
-	fi
-	if [ "$cpu" != sparc -a -x $QEMU/qemu-sparc -a -d /usr/qemu-sparc ] ; then
-	    echo   ":qemu-sparc:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x02:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff\xff:$QEMU/qemu-sparc:" > /proc/sys/fs/binfmt_misc/register
-	fi
-	echo
-}
-
-stop() {
-	echo -n $"Unregistering binary handler for qemu applications"
-	for a in i386 i486 ppc arm sparc ] ; do 
-	    [ -r /proc/sys/fs/binfmt_misc/qemu-$a ] && echo "-1" >/proc/sys/fs/binfmt_misc/qemu-$a
-	done
-	echo
-}
-
-reload() {
-	stop
-	start
-}
-
-qemu_status() {
-	if ls /proc/sys/fs/binfmt_misc/qemu-* &>/dev/null; then 
-		echo $"qemu binary format handlers are registered."
-		return 0
-	else
-		echo $"qemu binary format handlers are not registered."
-		return 3
-	fi
-}
-
-case "$1" in
-	start)
-		start
-		;;
-	stop)
-		stop
-		;;
-	status)
-		qemu_status
-		RETVAL=$?
-		;;
-	restart)
-		stop
-		start
-		;;
-	condrestart)
-		if qemu_status &>/dev/null; then
-			stop
-			start
-		fi
-		;;
-	*)
-		echo $"Usage: $prog {start|stop|status|restart|condrestart}"
-		exit 1
-esac
-exit $RETVAL
-

qemu.spec

@@ -1,180 +0,0 @@
-# For FC >= 6 we have gcc 3.4, for FC <= 5 we have gcc 3.2
-%if %{!?fedora:6}%{?fedora} >= 6
-%define gccver 34
-%else
-%define gccver 32
-%endif
-
-Summary: QEMU is a FAST! processor emulator
-Name: qemu
-Version: 0.8.2
-Release: 3%{?dist}
-License: GPL/LGPL
-Group: Development/Tools
-URL: http://www.qemu.org/
-Source0: http://www.qemu.org/%{name}-%{version}.tar.gz
-Source1: qemu.init
-Patch0: qemu-0.7.0-build.patch
-Patch1: qemu-0.8.0-sdata.patch
-Patch2: qemu-0.8.2-kernheaders.patch
-Patch3: qemu-0.8.2-target-sparc.patch
-BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-BuildRequires: SDL-devel compat-gcc-%{gccver} zlib-devel which texi2html
-Requires(post): /sbin/chkconfig
-Requires(preun): /sbin/service /sbin/chkconfig
-Requires(postun): /sbin/service
-ExclusiveArch: %{ix86} x86_64 ppc alpha sparc armv4l
-
-%description
-QEMU is a generic and open source processor emulator which achieves a good
-emulation speed by using dynamic translation. QEMU has two operating modes:
-
- * Full system emulation. In this mode, QEMU emulates a full system (for
-   example a PC), including a processor and various peripherials. It can be
-   used to launch different Operating Systems without rebooting the PC or
-   to debug system code.
- * User mode emulation. In this mode, QEMU can launch Linux processes compiled
-   for one CPU on another CPU.
-
-As QEMU requires no host kernel patches to run, it is safe and easy to use.
-
-%prep
-%setup -q
-%patch0 -p1
-%patch1 -p1
-%patch2 -p1
-%patch3 -p1
-
-%build
-./configure \
-    --prefix=%{_prefix} \
-    --interp-prefix=%{_prefix}/qemu-%%M \
-    --cc=gcc%{gccver} \
-    --enable-alsa
-make %{?_smp_mflags}
-
-%install
-rm -rf $RPM_BUILD_ROOT
-
-make prefix="${RPM_BUILD_ROOT}%{_prefix}" \
-     bindir="${RPM_BUILD_ROOT}%{_bindir}" \
-     sharedir="${RPM_BUILD_ROOT}%{_prefix}/share/qemu" \
-     mandir="${RPM_BUILD_ROOT}%{_mandir}" \
-     docdir="${RPM_BUILD_ROOT}%{_docdir}/%{name}-%{version}" \
-     datadir="${RPM_BUILD_ROOT}%{_prefix}/share/qemu" install
-
-install -D -p -m 0755 %{SOURCE1} $RPM_BUILD_ROOT%{_sysconfdir}/rc.d/init.d/qemu
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%post
-/sbin/chkconfig --add qemu
-
-%preun
-if [ $1 -eq 0 ]; then
-    /sbin/service qemu stop &>/dev/null || :
-    /sbin/chkconfig --del qemu
-fi
-
-%postun
-if [ $1 -ge 1 ]; then
-    /sbin/service qemu condrestart &>/dev/null || :
-fi
-
-%files
-%defattr(-,root,root)
-%doc Changelog README README.distrib TODO
-%doc qemu-doc.html qemu-tech.html
-%config %{_sysconfdir}/rc.d/init.d/qemu
-%{_bindir}/qemu*
-%{_prefix}/share/qemu/
-%{_mandir}/man1/*
-
-%changelog
-* Mon Sep 11 2006 David Woodhouse <dwmw2@infradead.org> 0.8.2-3
-- Rebuild
-
-* Thu Aug 24 2006 Matthias Saou <http://freshrpms.net/> 0.8.2-2
-- Remove the target-list iteration for x86_64 since they all build again.
-- Make gcc32 vs. gcc34 conditional on %%{fedora} to share the same spec for
-  FC5 and FC6.
-
-* Wed Aug 23 2006 Matthias Saou <http://freshrpms.net/> 0.8.2-1
-- Update to 0.8.2 (#200065).
-- Drop upstreamed syscall-macros patch2.
-- Put correct scriplet dependencies.
-- Force install mode for the init script to avoid umask problems.
-- Add %%postun condrestart for changes to the init script to be applied if any.
-- Update description with the latest "about" from the web page (more current).
-- Update URL to qemu.org one like the Source.
-- Add which build requirement.
-- Don't include texi files in %%doc since we ship them in html.
-- Switch to using gcc34 on devel, FC5 still has gcc32.
-- Add kernheaders patch to fix linux/compiler.h inclusion.
-- Add target-sparc patch to fix compiling on ppc (some int32 to float).
-
-* Thu Jun  8 2006 David Woodhouse <dwmw2@infradead.org> 0.8.1-3
-- More header abuse in modify_ldt(), change BuildRoot:
-
-* Wed Jun  7 2006 David Woodhouse <dwmw2@infradead.org> 0.8.1-2
-- Fix up kernel header abuse
-
-* Tue May 30 2006 David Woodhouse <dwmw2@infradead.org> 0.8.1-1
-- Update to 0.8.1
-
-* Sat Mar 18 2006 David Woodhouse <dwmw2@infradead.org> 0.8.0-6
-- Update linker script for PPC
-
-* Sat Mar 18 2006 David Woodhouse <dwmw2@infradead.org> 0.8.0-5
-- Just drop $RPM_OPT_FLAGS. They're too much of a PITA
-
-* Sat Mar 18 2006 David Woodhouse <dwmw2@infradead.org> 0.8.0-4
-- Disable stack-protector options which gcc 3.2 doesn't like
-
-* Fri Mar 17 2006 David Woodhouse <dwmw2@infradead.org> 0.8.0-3
-- Use -mcpu= instead of -mtune= on x86_64 too
-- Disable SPARC targets on x86_64, because dyngen doesn't like fnegs
-
-* Fri Mar 17 2006 David Woodhouse <dwmw2@infradead.org> 0.8.0-2
-- Don't use -mtune=pentium4 on i386. GCC 3.2 doesn't like it
-
-* Fri Mar 17 2006 David Woodhouse <dwmw2@infradead.org> 0.8.0-1
-- Update to 0.8.0
-- Resort to using compat-gcc-32
-- Enable ALSA
-
-* Mon May 16 2005 David Woodhouse <dwmw2@infradead.org> 0.7.0-2
-- Proper fix for GCC 4 putting 'blr' or 'ret' in the middle of the function,
-  for i386, x86_64 and PPC.
-
-* Sat Apr 30 2005 David Woodhouse <dwmw2@infradead.org> 0.7.0-1
-- Update to 0.7.0
-- Fix dyngen for PPC functions which end in unconditional branch
-
-* Fri Apr  7 2005 Michael Schwendt <mschwendt[AT]users.sf.net>
-- rebuilt
-
-* Sun Feb 13 2005 David Woodhouse <dwmw2@infradead.org> 0.6.1-2
-- Package cleanup
-
-* Sun Nov 21 2004 David Woodhouse <dwmw2@redhat.com> 0.6.1-1
-- Update to 0.6.1
-
-* Tue Jul 20 2004 David Woodhouse <dwmw2@redhat.com> 0.6.0-2
-- Compile fix from qemu CVS, add x86_64 host support
-
-* Mon May 12 2004 David Woodhouse <dwmw2@redhat.com> 0.6.0-1
-- Update to 0.6.0.
-
-* Sat May 8 2004 David Woodhouse <dwmw2@redhat.com> 0.5.5-1
-- Update to 0.5.5.
-
-* Thu May 2 2004 David Woodhouse <dwmw2@redhat.com> 0.5.4-1
-- Update to 0.5.4.
-
-* Thu Apr 22 2004 David Woodhouse <dwmw2@redhat.com> 0.5.3-1
-- Update to 0.5.3. Add init script.
-
-* Thu Jul 17 2003 Jeff Johnson <jbj@redhat.com> 0.4.3-1
-- Create.

sources

@@ -1 +0,0 @@
-5b3a89eb2f256a8a6f3bb07f7b3f1b07  qemu-0.8.2.tar.gz