diff --git a/ksm.init b/ksm.init
new file mode 100644
index 0000000..a4bed2d
--- /dev/null
+++ b/ksm.init
@@ -0,0 +1,104 @@
+#!/bin/bash
+#
+# ksm          Kernel Samepage Merging
+#
+# Author:      Dan Kenigsberg <danken@redhat.com>
+#
+# Copyright 2009 Red Hat, Inc. and/or its affiliates.
+# Released under the GPL
+#
+# chkconfig: 345 84 16
+# description: The KSM init script starts and stops the ksm kernel thread.
+# config: /etc/sysconfig/ksm
+#
+### BEGIN INIT INFO
+# Provides: ksm
+# Required-Start:
+# Required-Stop:
+# Should-Start:
+# Default-Start: 3 4 5
+# Short-Description: start and stop ksm
+# Description: The KSM init script starts and stops the ksm kernel thread.
+### END INIT INFO
+
+. /etc/rc.d/init.d/functions
+
+if [ -f /etc/sysconfig/ksm ]; then
+    . /etc/sysconfig/ksm
+fi
+
+prog=ksm
+RETVAL=0
+
+# unless KSM_MAX_KERNEL_PAGES is set, let ksm munch up to half of total memory.
+default_max_kernel_pages () {
+    local total pagesize
+    total=`awk '/^MemTotal:/ {print $2}' /proc/meminfo`
+    pagesize=`getconf PAGESIZE`
+    echo $[total * 1024 / pagesize / 2]
+}
+
+start() {
+    echo -n $"Starting $prog: "
+    if [ -f /sys/kernel/mm/ksm/max_kernel_pages ]; then
+        KSM_MAX_KERNEL_PAGES=${KSM_MAX_KERNEL_PAGES:-`default_max_kernel_pages`}
+        echo $KSM_MAX_KERNEL_PAGES > /sys/kernel/mm/ksm/max_kernel_pages
+    fi
+    echo 1 > /sys/kernel/mm/ksm/run
+    RETVAL=$?
+    [ $RETVAL = 0 ] && success $"$prog startup" || failure $"$prog startup"
+    echo
+}
+
+stop() {
+    echo -n $"Stopping $prog: "
+    echo 0 > /sys/kernel/mm/ksm/run
+    RETVAL=$?
+    [ $RETVAL = 0 ] && success $"$prog shutdown" || failure $"$prog shutdown"
+    echo
+}
+
+status() {
+    if [ ! -f /sys/kernel/mm/ksm/run ] ; then
+        echo $"$prog not supported"
+        RETVAL=1
+    else if [ "$(cat /sys/kernel/mm/ksm/run 2>/dev/null)" != "1" ]; then
+        echo $"$prog is not running"
+        RETVAL=1
+    else
+        echo $"$prog is running"
+        RETVAL=0
+    fi; fi
+}
+
+restart() {
+    stop
+    start
+}
+
+case "$1" in
+  start)
+	start
+	;;
+  stop)
+	stop
+	;;
+  status)
+        status
+	;;
+  restart)
+	restart
+	;;
+  condrestart|try-restart)
+	status >/dev/null 2>&1 || exit 0
+	restart
+        ;;
+  force-reload)
+	restart
+	;;
+  *)
+	echo $"Usage: $prog {start|stop|restart|force-reload|condrestart|try-restart|status|help}"
+	RETVAL=2
+esac
+
+exit $RETVAL
diff --git a/ksmtuned.init b/ksmtuned.init
new file mode 100644
index 0000000..5cd6090
--- /dev/null
+++ b/ksmtuned.init
@@ -0,0 +1,94 @@
+#!/bin/bash
+#
+# ksmtuned     Kernel Samepage Merging (KSM) Tuning Daemon
+#
+# Author:      Dan Kenigsberg <danken@redhat.com>
+#
+# Copyright 2009 Red Hat, Inc. and/or its affiliates.
+# Released under the GPL
+#
+# chkconfig: 345 85 15
+# description: The KSM tuning daemon controls whether (and with what vigor) \
+#              ksm should ksm search duplicated pages.
+# processname: ksmtuned
+# config: /etc/ksmtuned.conf
+# pidfile: /var/run/ksmtuned.pid
+#
+### BEGIN INIT INFO
+# Provides: ksmtuned
+# Required-Start:
+# Required-Stop:
+# Should-Start:
+# Default-Start: 3 4 5
+# Short-Description: tune the speed of ksm
+# Description: The Kernel Samepage Merging control Daemon is a simple script
+#   that controls whether (and with what vigor) should ksm search duplicated
+#   memory pages.
+#   needs testing and ironing. contact danken@redhat.com if something breaks.
+### END INIT INFO
+
+. /etc/rc.d/init.d/functions
+
+prog=ksmtuned
+ksmtuned=/usr/sbin/ksmtuned
+pidfile=${PIDFILE-/var/run/ksmtune.pid}
+RETVAL=0
+
+start() {
+    echo -n $"Starting $prog: "
+    daemon --pidfile=${pidfile} $ksmtuned
+    RETVAL=$?
+    echo
+    [ $RETVAL -eq 0 ] && touch /var/lock/subsys/$prog
+}
+
+stop() {
+    echo -n $"Stopping $prog: "
+    killproc -p ${pidfile}
+    RETVAL=$?
+    echo
+    [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog
+}
+
+restart() {
+    stop
+    start
+}
+
+condrestart() {
+    [ -e /var/lock/subsys/$prog ] && restart || :
+}
+
+case "$1" in
+  start)
+	start
+	;;
+  stop)
+	stop
+	;;
+  status)
+        status -p ${pidfile} $prog
+	RETVAL=$?
+	;;
+  restart|force-reload)
+	restart
+	;;
+  condrestart|try-restart)
+	condrestart
+	;;
+  retune)
+        pid=`cat ${pidfile} 2> /dev/null`
+        RETVAL=$?
+        if [ -z "$pid" ]; then
+	    echo $"Cannot retune, service is not running."
+	else
+            kill -SIGUSR1 $pid
+            RETVAL=$?
+	fi
+        ;;
+  *)
+	echo $"Usage: $prog {start|stop|restart|force-reload|condrestart|try-restart|status|retune|help}"
+	RETVAL=2
+esac
+
+exit $RETVAL
diff --git a/qemu-ga.init b/qemu-ga.init
new file mode 100644
index 0000000..8d6a866
--- /dev/null
+++ b/qemu-ga.init
@@ -0,0 +1,86 @@
+#!/bin/bash
+#
+# qemu-ga: QEMU Guest Agent init script
+# Author: Lubomir Rintel <lkundrak@v3.sk>
+#
+# chkconfig: - 80 30
+# description: QEMU Guest Agents lets a virtualized guest use functionality
+#              provided by the host hypervisor.
+# processname: qemu-ga
+# config: /etc/sysconfig/qemu-ga
+# pidfile: /var/run/qemu-ga.pid
+#
+### BEGIN INIT INFO
+# Provides: qemu-ga
+# Required-Start:
+# Required-Stop:
+# Should-Start:
+# Default-Start:
+# Default-Stop: 0 1 2 6
+# Short-Description: QEMU Guest Agent
+# Description: QEMU Guest Agents lets a virtualized guest use functionality
+#              provided by the host hypervisor.
+### END INIT INFO
+
+. /etc/rc.d/init.d/functions
+
+prog=qemu-ga
+qemuga=/usr/bin/qemu-ga
+pidfile=${PIDFILE-/var/run/ksmtune.pid}
+QEMUGA_DEV=/dev/virtio-ports/org.qemu.guest_agent.0
+RETVAL=0
+
+# Source service configuration.
+[ -e /etc/sysconfig/$prog ] && . /etc/sysconfig/$prog
+
+# Do nothing if the channel is not present
+[ -e "$QEMUGA_DEV" ] || exit 0
+
+start() {
+    echo -n $"Starting $prog: "
+    daemon --pidfile=${pidfile} $qemuga --daemonize $QEMUGA_OPTS
+    RETVAL=$?
+    echo
+    [ $RETVAL -eq 0 ] && touch /var/lock/subsys/$prog
+}
+
+stop() {
+    echo -n $"Stopping $prog: "
+    killproc -p ${pidfile}
+    RETVAL=$?
+    echo
+    [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog
+}
+
+restart() {
+    stop
+    start
+}
+
+condrestart() {
+    [ -e /var/lock/subsys/$prog ] && restart || :
+}
+
+case "$1" in
+  start)
+	start
+	;;
+  stop)
+	stop
+	;;
+  status)
+        status -p ${pidfile} $prog
+	RETVAL=$?
+	;;
+  restart|force-reload)
+	restart
+	;;
+  condrestart|try-restart)
+	condrestart
+	;;
+  *)
+	echo $"Usage: $prog {start|stop|restart|force-reload|condrestart|try-restart|status|retune|help}"
+	RETVAL=2
+esac
+
+exit $RETVAL
diff --git a/qemu.init b/qemu.init
new file mode 100644
index 0000000..95f19f2
--- /dev/null
+++ b/qemu.init
@@ -0,0 +1,102 @@
+#!/bin/sh
+#
+# qemu	Allow users to run non-native Linux programs by just clicking on them
+#	(or typing ./file.exe)
+#
+# chkconfig: 2345 35 98
+# description: Allow users to run non-native Linux programs by just clicking \
+#	       on them (or typing ./file.exe)
+
+. /etc/rc.d/init.d/functions
+RETVAL=0
+QEMU=/usr/bin
+
+start() {
+	cpu=`uname -m`
+        case "$cpu" in
+	    i386|i486|i586|i686|i86pc|BePC)
+		cpu="i386"
+		;;
+	    "Power Macintosh"|ppc|ppc64)
+		cpu="ppc"
+		;;
+	    armv4l|armv5l)
+		cpu="arm"
+		;;
+	    sh4)
+		cpu="sh4"
+		;;
+	esac
+
+	echo -n $"Registering binary handler for qemu applications"
+	/sbin/modprobe binfmt_misc &>/dev/null
+	if [ "$cpu" != i386 -a -x $QEMU/qemu-i386 -a -d /usr/qemu-i386 ] ; then
+	    echo ":qemu-i386:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfa\xff\xff\xff:$QEMU/qemu-i386:" > /proc/sys/fs/binfmt_misc/register
+	    echo ":qemu-i486:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x06\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfa\xff\xff\xff:$QEMU/qemu-i386:" > /proc/sys/fs/binfmt_misc/register
+	fi
+	if [ "$cpu" != arm -a -x $QEMU/qemu-arm -a -d /usr/qemu-arm ] ; then
+	    echo   ":qemu-arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfa\xff\xff\xff:$QEMU/qemu-arm:" > /proc/sys/fs/binfmt_misc/register
+	fi
+	if [ "$cpu" != ppc -a -x $QEMU/qemu-ppc -a -d /usr/qemu-ppc ] ; then
+	    echo   ":ppc:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x14:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfa\xff\xff\xff:$QEMU/qemu-ppc:" > /proc/sys/fs/binfmt_misc/register
+	echo do ppc
+	fi
+	if [ "$cpu" != sparc -a -x $QEMU/qemu-sparc -a -d /usr/qemu-sparc ] ; then
+	    echo   ":qemu-sparc:M::\x7fELF\x01\x02\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x02:\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfa\xff\xff\xff:$QEMU/qemu-sparc:" > /proc/sys/fs/binfmt_misc/register
+	fi
+	if [ "$cpu" != sh4 -a -x $QEMU/qemu-sh4 -a -d /usr/qemu-sh4 ] ; then
+	    echo   ":qemu-sh4:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x2a\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfa\xff\xff\xff:$QEMU/qemu-sh4:" > /proc/sys/fs/binfmt_misc/register
+	fi
+	echo
+}
+
+stop() {
+	echo -n $"Unregistering binary handler for qemu applications"
+	for a in i386 i486 ppc arm sparc sh4 ] ; do 
+	    [ -r /proc/sys/fs/binfmt_misc/qemu-$a ] && echo "-1" >/proc/sys/fs/binfmt_misc/qemu-$a
+	done
+	echo
+}
+
+reload() {
+	stop
+	start
+}
+
+qemu_status() {
+	if ls /proc/sys/fs/binfmt_misc/qemu-* &>/dev/null; then 
+		echo $"qemu binary format handlers are registered."
+		return 0
+	else
+		echo $"qemu binary format handlers are not registered."
+		return 3
+	fi
+}
+
+case "$1" in
+	start)
+		start
+		;;
+	stop)
+		stop
+		;;
+	status)
+		qemu_status
+		RETVAL=$?
+		;;
+	restart)
+		stop
+		start
+		;;
+	condrestart)
+		if qemu_status &>/dev/null; then
+			stop
+			start
+		fi
+		;;
+	*)
+		echo $"Usage: $prog {start|stop|status|restart|condrestart}"
+		exit 1
+esac
+exit $RETVAL
+
diff --git a/qemu.spec b/qemu.spec
index 8773079..7db8f58 100644
--- a/qemu.spec
+++ b/qemu.spec
@@ -14,6 +14,11 @@
 # Enable rbd support.
 #
 # Enable by default, except on RHEL.
+#
+# = systemd =
+# Install systemd unit files instead of sysvinit scripts.
+#
+# Enabled by default.
 
 %if 0%{?rhel}
 # RHEL-specific defaults:
@@ -22,6 +27,7 @@
 %bcond_with    rbd              # disabled
 %bcond_without spice            # enabled
 %bcond_without seccomp          # enabled
+%bcond_without systemd          # enabled
 %else
 # General defaults:
 %bcond_with    kvmonly          # disabled
@@ -29,6 +35,7 @@
 %bcond_without rbd              # enabled
 %bcond_without spice            # enabled
 %bcond_without seccomp          # enabled
+%bcond_without systemd          # enabled
 %endif
 
 %global SLOF_gittagdate 20120731
@@ -131,6 +138,7 @@ Source0: qemu-kvm-%{version}.tar.gz
 #Source0: http://downloads.sourceforge.net/sourceforge/kvm/qemu-kvm-%{version}.tar.gz
 
 Source1: qemu.binfmt
+Source6661: qemu.init
 
 # Loads kvm kernel modules at boot
 Source2: kvm.modules
@@ -140,14 +148,17 @@ Source3: 80-kvm.rules
 
 # KSM control scripts
 Source4: ksm.service
+Source6664: ksm.init
 Source5: ksm.sysconfig
 Source6: ksmctl.c
 Source7: ksmtuned.service
+Source6667: ksmtuned.init
 Source8: ksmtuned
 Source9: ksmtuned.conf
 
 Source10: qemu-guest-agent.service
 Source11: 99-qemu-guest-agent.rules
+Source66610: qemu-ga.init
 
 # Patches queued for 1.2.1 stable
 Patch0001: 0001-target-xtensa-convert-host-errno-values-to-guest.patch
@@ -632,9 +643,11 @@ Group: Development/Tools
 Requires(post): /usr/bin/getent
 Requires(post): /usr/sbin/groupadd
 Requires(post): /usr/sbin/useradd
+%if %{with systemd}
 Requires(post): systemd-units
 Requires(preun): systemd-units
 Requires(postun): systemd-units
+%endif
 %description common
 QEMU is a generic and open source processor emulator which achieves a good
 emulation speed by using dynamic translation.
@@ -644,9 +657,11 @@ This package provides the common files needed by all QEMU targets
 %package guest-agent
 Summary: QEMU guest agent
 Group: System Environment/Daemons
+%if %{with systemd}
 Requires(post): systemd-units
 Requires(preun): systemd-units
 Requires(postun): systemd-units
+%endif
 
 %description guest-agent
 QEMU is a generic and open source processor emulator which achieves a good
@@ -660,20 +675,34 @@ This package does not need to be installed on the host OS.
 %post guest-agent
 if [ $1 -eq 1 ] ; then
     # Initial installation.
+%if %{with systemd}
     /bin/systemctl daemon-reload >/dev/null 2>&1 || :
+%else
+    /sbin/chkconfig --add qemu-ga
+%endif
 fi
 
 %preun guest-agent
 if [ $1 -eq 0 ] ; then
     # Package removal, not upgrade.
+%if %{with systemd}
     /bin/systemctl stop qemu-guest-agent.service > /dev/null 2>&1 || :
+%else
+    /sbin/chkconfig --del qemu-ga
+%endif
 fi
 
 %postun guest-agent
+%if %{with systemd}
 /bin/systemctl daemon-reload >/dev/null 2>&1 || :
+%endif
 if [ $1 -ge 1 ] ; then
     # Package upgrade, not uninstall.
+%if %{with systemd}
     /bin/systemctl try-restart qemu-guest-agent.service >/dev/null 2>&1 || :
+%else
+    /sbin/service qemu-ga condrestart &>/dev/null || :
+%endif
 fi
 
 
@@ -683,8 +712,10 @@ fi
 Summary: QEMU user mode emulation of qemu targets
 Group: Development/Tools
 Requires: %{name}-common = %{epoch}:%{version}-%{release}
+%if %{with systemd}
 Requires(post): systemd-units
 Requires(postun): systemd-units
+%endif
 %description %{user}
 QEMU is a generic and open source processor emulator which achieves a good
 emulation speed by using dynamic translation.
@@ -1327,11 +1358,21 @@ gcc %{SOURCE6} -O2 -g -o ksmctl
 
 %define _udevdir /lib/udev/rules.d
 
+%if %{with systemd}
 install -D -p -m 0755 %{SOURCE4} $RPM_BUILD_ROOT/lib/systemd/system/ksm.service
+%else
+install -D -p -m 0755 %{SOURCE6664} $RPM_BUILD_ROOT%{_initddir}/ksm
+%endif
 install -D -p -m 0644 %{SOURCE5} $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/ksm
+%if %{with systemd}
 install -D -p -m 0755 ksmctl $RPM_BUILD_ROOT/lib/systemd/ksmctl
+%endif
 
+%if %{with systemd}
 install -D -p -m 0755 %{SOURCE7} $RPM_BUILD_ROOT/lib/systemd/system/ksmtuned.service
+%else
+install -D -p -m 0755 %{SOURCE6667} $RPM_BUILD_ROOT%{_initddir}/ksmtuned
+%endif
 install -D -p -m 0755 %{SOURCE8} $RPM_BUILD_ROOT%{_sbindir}/ksmtuned
 install -D -p -m 0644 %{SOURCE9} $RPM_BUILD_ROOT%{_sysconfdir}/ksmtuned.conf
 
@@ -1361,6 +1402,9 @@ rm $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/qemu-system-%{kvm_target}.stp
 %endif
 
 chmod -x ${RPM_BUILD_ROOT}%{_mandir}/man1/*
+%if %{without systemd}
+install -D -p -m 0755 %{SOURCE6661} $RPM_BUILD_ROOT%{_initddir}/qemu
+%endif
 install -D -p -m 0644 -t ${RPM_BUILD_ROOT}%{qemudocdir} Changelog README TODO COPYING COPYING.LIB LICENSE
 
 install -D -p -m 0644 qemu.sasl $RPM_BUILD_ROOT%{_sysconfdir}/sasl2/qemu.conf
@@ -1428,6 +1472,7 @@ rom_link ../seabios/bios.bin bios.bin
 rom_link ../sgabios/sgabios.bin sgabios.bin
 %endif
 
+%if %{with systemd}
 %if 0%{?user:1}
 mkdir -p $RPM_BUILD_ROOT%{_exec_prefix}/lib/binfmt.d
 for i in dummy \
@@ -1476,6 +1521,11 @@ mkdir -p $RPM_BUILD_ROOT%{_unitdir}
 mkdir -p $RPM_BUILD_ROOT%{_udevdir}
 install -m 0644 %{SOURCE10} $RPM_BUILD_ROOT%{_unitdir}
 install -m 0644 %{SOURCE11} $RPM_BUILD_ROOT%{_udevdir}
+%else
+# For the qemu-guest-agent subpackage install the service
+mkdir -p $RPM_BUILD_ROOT%{_initddir}
+install -D -p -m 0755 %{SOURCE66610} $RPM_BUILD_ROOT%{_initddir}/qemu-ga
+%endif
 
 %check
 make check
@@ -1491,8 +1541,13 @@ udevadm trigger --sysname-match=kvm || :
 %post common
 if [ $1 -eq 1 ] ; then
     # Initial installation
+%if %{with systemd}
     /bin/systemctl enable ksm.service >/dev/null 2>&1 || :
     /bin/systemctl enable ksmtuned.service >/dev/null 2>&1 || :
+%else
+    /sbin/chkconfig --add ksm
+    /sbin/chkconfig --add ksmtuned
+%endif
 fi
 
 getent group kvm >/dev/null || groupadd -g 36 -r kvm
@@ -1504,27 +1559,59 @@ getent passwd qemu >/dev/null || \
 %preun common
 if [ $1 -eq 0 ] ; then
     # Package removal, not upgrade
+%if %{with systemd}
     /bin/systemctl --no-reload disable ksmtuned.service > /dev/null 2>&1 || :
     /bin/systemctl --no-reload disable ksm.service > /dev/null 2>&1 || :
     /bin/systemctl stop ksmtuned.service > /dev/null 2>&1 || :
     /bin/systemctl stop ksm.service > /dev/null 2>&1 || :
+%else
+    /sbin/service ksmtuned stop &>/dev/null || :
+    /sbin/chkconfig --del ksmtuned
+    /sbin/service ksm stop &>/dev/null || :
+    /sbin/chkconfig --del ksm
+%endif
 fi
 
 %postun common
+%if %{with systemd}
 /bin/systemctl daemon-reload >/dev/null 2>&1 || :
+%endif
 if [ $1 -ge 1 ] ; then
     # Package upgrade, not uninstall
+%if %{with systemd}
     /bin/systemctl try-restart ksmtuned.service >/dev/null 2>&1 || :
     /bin/systemctl try-restart ksm.service >/dev/null 2>&1 || :
+%else
+    /sbin/service ksm condrestart &>/dev/null || :
+    /sbin/service ksmtuned condrestart &>/dev/null || :
+%endif
 fi
 
 
 %if 0%{?user:1}
 %post %{user}
+%if %{with systemd}
 /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
+%else
+/sbin/chkconfig --add qemu
+%endif
+
+%preun user
+if [ $1 -eq 0 ]; then
+%if %{without systemd}
+    /sbin/service qemu stop &>/dev/null || :
+    /sbin/chkconfig --del qemu
+%endif
+fi
 
 %postun %{user}
+%if %{with systemd}
 /bin/systemctl --system try-restart systemd-binfmt.service &>/dev/null || :
+%else
+if [ $1 -ge 1 ]; then
+    /sbin/service qemu condrestart &>/dev/null || :
+fi
+%endif
 %endif
 
 %global kvm_files \
@@ -1566,10 +1653,18 @@ fi
 %{_bindir}/virtfs-proxy-helper
 %{_libexecdir}/qemu-bridge-helper
 %config(noreplace) %{_sysconfdir}/sasl2/qemu.conf
+%if %{with systemd}
 /lib/systemd/system/ksm.service
 /lib/systemd/ksmctl
+%else
+%{_initddir}/ksm
+%endif
 %config(noreplace) %{_sysconfdir}/sysconfig/ksm
+%if %{with systemd}
 /lib/systemd/system/ksmtuned.service
+%else
+%{_initddir}/ksmtuned
+%endif
 %{_sbindir}/ksmtuned
 %config(noreplace) %{_sysconfdir}/ksmtuned.conf
 %dir %{_sysconfdir}/qemu
@@ -1578,13 +1673,21 @@ fi
 %defattr(-,root,root,-)
 %doc COPYING README
 %{_bindir}/qemu-ga
+%if %{with systemd}
 %{_unitdir}/qemu-guest-agent.service
 %{_udevdir}/99-qemu-guest-agent.rules
+%else
+%{_initddir}/qemu-ga
+%endif
 
 %if 0%{?user:1}
 %files %{user}
 %defattr(-,root,root)
+%if %{with systemd}
 %{_exec_prefix}/lib/binfmt.d/qemu-*.conf
+%else
+%{_initddir}/qemu
+%endif
 %{_bindir}/qemu-i386
 %{_bindir}/qemu-x86_64
 %{_bindir}/qemu-alpha