qemu/0612-xhci-update-port-handling.patch

From 2ed404cacc625272fb7017476634b77002ee880b Mon Sep 17 00:00:00 2001
From: Gerd Hoffmann <kraxel@redhat.com>
Date: Tue, 28 Aug 2012 13:38:01 +0200
Subject: [PATCH] xhci: update port handling

This patch changes the way xhci ports are linked to USBPorts.  The fixed
1:1 relationship between xhci ports and USBPorts is gone.  Now each
USBPort represents a physical plug which has usually two xhci ports
assigned: one usb2 and ond usb3 port.  usb devices show up at one or the
other, depending on whenever they support superspeed or not.

This patch also makes the number of usb2 and usb3 ports runtime
configurable by adding 'p2' and 'p3' properties.  It is allowed to
have different numbers of usb2 and usb3 ports.  Specifying p2=4,p3=2
will give you an xhci adapter which supports all speeds on physical
ports 1+2 and usb2 only on ports 3+4.
---
 hw/usb/hcd-xhci.c | 137 ++++++++++++++++++++++++++++++++++++++----------------
 1 file changed, 97 insertions(+), 40 deletions(-)

diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c
index 11cb3bc..642e8e5 100644
--- a/hw/usb/hcd-xhci.c
+++ b/hw/usb/hcd-xhci.c
@@ -36,10 +36,10 @@
 #define FIXME() do { fprintf(stderr, "FIXME %s:%d\n", \
                              __func__, __LINE__); abort(); } while (0)
 
-#define USB2_PORTS 4
-#define USB3_PORTS 4
+#define MAXPORTS_2 8
+#define MAXPORTS_3 8
 
-#define MAXPORTS (USB2_PORTS+USB3_PORTS)
+#define MAXPORTS (MAXPORTS_2+MAXPORTS_3)
 #define MAXSLOTS MAXPORTS
 #define MAXINTRS 1 /* MAXPORTS */
 
@@ -300,8 +300,10 @@ typedef struct XHCIRing {
 } XHCIRing;
 
 typedef struct XHCIPort {
-    USBPort port;
     uint32_t portsc;
+    uint32_t portnr;
+    USBPort  *uport;
+    uint32_t speedmask;
 } XHCIPort;
 
 struct XHCIState;
@@ -379,9 +381,13 @@ struct XHCIState {
     qemu_irq irq;
     MemoryRegion mem;
     const char *name;
-    uint32_t msi;
     unsigned int devaddr;
 
+    /* properties */
+    uint32_t numports_2;
+    uint32_t numports_3;
+    uint32_t msi;
+
     /* Operational Registers */
     uint32_t usbcmd;
     uint32_t usbsts;
@@ -392,8 +398,10 @@ struct XHCIState {
     uint32_t dcbaap_high;
     uint32_t config;
 
+    USBPort  uports[MAX(MAXPORTS_2, MAXPORTS_3)];
     XHCIPort ports[MAXPORTS];
     XHCISlot slots[MAXSLOTS];
+    uint32_t numports;
 
     /* Runtime Registers */
     uint32_t iman;
@@ -578,6 +586,28 @@ static inline dma_addr_t xhci_mask64(uint64_t addr)
     }
 }
 
+static XHCIPort *xhci_lookup_port(XHCIState *xhci, struct USBPort *uport)
+{
+    int index;
+
+    if (!uport->dev) {
+        return NULL;
+    }
+    switch (uport->dev->speed) {
+    case USB_SPEED_LOW:
+    case USB_SPEED_FULL:
+    case USB_SPEED_HIGH:
+        index = uport->index;
+        break;
+    case USB_SPEED_SUPER:
+        index = uport->index + xhci->numports_2;
+        break;
+    default:
+        return NULL;
+    }
+    return &xhci->ports[index];
+}
+
 static void xhci_irq_update(XHCIState *xhci)
 {
     int level = 0;
@@ -1126,7 +1156,7 @@ static TRBCCode xhci_reset_ep(XHCIState *xhci, unsigned int slotid,
         ep |= 0x80;
     }
 
-    dev = xhci->ports[xhci->slots[slotid-1].port-1].port.dev;
+    dev = xhci->ports[xhci->slots[slotid-1].port-1].uport->dev;
     if (!dev) {
         return CC_USB_TRANSACTION_ERROR;
     }
@@ -1313,7 +1343,7 @@ static USBDevice *xhci_find_device(XHCIPort *port, uint8_t addr)
     if (!(port->portsc & PORTSC_PED)) {
         return NULL;
     }
-    return usb_find_device(&port->port, addr);
+    return usb_find_device(port->uport, addr);
 }
 
 static int xhci_setup_packet(XHCITransfer *xfer)
@@ -1734,9 +1764,9 @@ static TRBCCode xhci_address_slot(XHCIState *xhci, unsigned int slotid,
             ep0_ctx[0], ep0_ctx[1], ep0_ctx[2], ep0_ctx[3], ep0_ctx[4]);
 
     port = (slot_ctx[1]>>16) & 0xFF;
-    dev = xhci->ports[port-1].port.dev;
+    dev = xhci->ports[port-1].uport->dev;
 
-    if (port < 1 || port > MAXPORTS) {
+    if (port < 1 || port > xhci->numports) {
         fprintf(stderr, "xhci: bad port %d\n", port);
         return CC_TRB_ERROR;
     } else if (!dev) {
@@ -1985,7 +2015,7 @@ static unsigned int xhci_get_slot(XHCIState *xhci, XHCIEvent *event, XHCITRB *tr
 static TRBCCode xhci_get_port_bandwidth(XHCIState *xhci, uint64_t pctx)
 {
     dma_addr_t ctx;
-    uint8_t bw_ctx[MAXPORTS+1];
+    uint8_t bw_ctx[xhci->numports+1];
 
     DPRINTF("xhci_get_port_bandwidth()\n");
 
@@ -1995,7 +2025,7 @@ static TRBCCode xhci_get_port_bandwidth(XHCIState *xhci, uint64_t pctx)
 
     /* TODO: actually implement real values here */
     bw_ctx[0] = 0;
-    memset(&bw_ctx[1], 80, MAXPORTS); /* 80% */
+    memset(&bw_ctx[1], 80, xhci->numports); /* 80% */
     pci_dma_write(&xhci->pci_dev, ctx, bw_ctx, sizeof(bw_ctx));
 
     return CC_SUCCESS;
@@ -2165,12 +2195,11 @@ static void xhci_process_commands(XHCIState *xhci)
 
 static void xhci_update_port(XHCIState *xhci, XHCIPort *port, int is_detach)
 {
-    int nr = port->port.index + 1;
-
     port->portsc = PORTSC_PP;
-    if (port->port.dev && port->port.dev->attached && !is_detach) {
+    if (port->uport->dev && port->uport->dev->attached && !is_detach &&
+        (1 << port->uport->dev->speed) & port->speedmask) {
         port->portsc |= PORTSC_CCS;
-        switch (port->port.dev->speed) {
+        switch (port->uport->dev->speed) {
         case USB_SPEED_LOW:
             port->portsc |= PORTSC_SPEED_LOW;
             break;
@@ -2180,14 +2209,18 @@ static void xhci_update_port(XHCIState *xhci, XHCIPort *port, int is_detach)
         case USB_SPEED_HIGH:
             port->portsc |= PORTSC_SPEED_HIGH;
             break;
+        case USB_SPEED_SUPER:
+            port->portsc |= PORTSC_SPEED_SUPER;
+            break;
         }
     }
 
     if (xhci_running(xhci)) {
         port->portsc |= PORTSC_CSC;
-        XHCIEvent ev = { ER_PORT_STATUS_CHANGE, CC_SUCCESS, nr << 24};
+        XHCIEvent ev = { ER_PORT_STATUS_CHANGE, CC_SUCCESS,
+                         port->portnr << 24};
         xhci_event(xhci, &ev);
-        DPRINTF("xhci: port change event for port %d\n", nr);
+        DPRINTF("xhci: port change event for port %d\n", port->portnr);
     }
 }
 
@@ -2215,7 +2248,7 @@ static void xhci_reset(DeviceState *dev)
         xhci_disable_slot(xhci, i+1);
     }
 
-    for (i = 0; i < MAXPORTS; i++) {
+    for (i = 0; i < xhci->numports; i++) {
         xhci_update_port(xhci, xhci->ports + i, 0);
     }
 
@@ -2246,7 +2279,8 @@ static uint32_t xhci_cap_read(XHCIState *xhci, uint32_t reg)
         ret = 0x01000000 | LEN_CAP;
         break;
     case 0x04: /* HCSPARAMS 1 */
-        ret = (MAXPORTS<<24) | (MAXINTRS<<8) | MAXSLOTS;
+        ret = ((xhci->numports_2+xhci->numports_3)<<24)
+            | (MAXINTRS<<8) | MAXSLOTS;
         break;
     case 0x08: /* HCSPARAMS 2 */
         ret = 0x0000000f;
@@ -2276,7 +2310,7 @@ static uint32_t xhci_cap_read(XHCIState *xhci, uint32_t reg)
         ret = 0x20425355; /* "USB " */
         break;
     case 0x28: /* Supported Protocol:08 */
-        ret = 0x00000001 | (USB2_PORTS<<8);
+        ret = 0x00000001 | (xhci->numports_2<<8);
         break;
     case 0x2c: /* Supported Protocol:0c */
         ret = 0x00000000; /* reserved */
@@ -2288,7 +2322,7 @@ static uint32_t xhci_cap_read(XHCIState *xhci, uint32_t reg)
         ret = 0x20425355; /* "USB " */
         break;
     case 0x38: /* Supported Protocol:08 */
-        ret = 0x00000000 | (USB2_PORTS+1) | (USB3_PORTS<<8);
+        ret = 0x00000000 | (xhci->numports_2+1) | (xhci->numports_3<<8);
         break;
     case 0x3c: /* Supported Protocol:0c */
         ret = 0x00000000; /* reserved */
@@ -2307,7 +2341,7 @@ static uint32_t xhci_port_read(XHCIState *xhci, uint32_t reg)
     uint32_t port = reg >> 4;
     uint32_t ret;
 
-    if (port >= MAXPORTS) {
+    if (port >= xhci->numports) {
         fprintf(stderr, "xhci_port_read: port %d out of bounds\n", port);
         ret = 0;
         goto out;
@@ -2340,7 +2374,7 @@ static void xhci_port_write(XHCIState *xhci, uint32_t reg, uint32_t val)
 
     trace_usb_xhci_port_write(port, reg & 0x0f, val);
 
-    if (port >= MAXPORTS) {
+    if (port >= xhci->numports) {
         fprintf(stderr, "xhci_port_read: port %d out of bounds\n", port);
         return;
     }
@@ -2362,7 +2396,7 @@ static void xhci_port_write(XHCIState *xhci, uint32_t reg, uint32_t val)
         /* write-1-to-start bits */
         if (val & PORTSC_PR) {
             DPRINTF("xhci: port %d reset\n", port);
-            usb_device_reset(xhci->ports[port].port.dev);
+            usb_device_reset(xhci->ports[port].uport->dev);
             portsc |= PORTSC_PRC | PORTSC_PED;
         }
         xhci->ports[port].portsc = portsc;
@@ -2659,7 +2693,7 @@ static const MemoryRegionOps xhci_mem_ops = {
 static void xhci_attach(USBPort *usbport)
 {
     XHCIState *xhci = usbport->opaque;
-    XHCIPort *port = &xhci->ports[usbport->index];
+    XHCIPort *port = xhci_lookup_port(xhci, usbport);
 
     xhci_update_port(xhci, port, 0);
 }
@@ -2667,7 +2701,7 @@ static void xhci_attach(USBPort *usbport)
 static void xhci_detach(USBPort *usbport)
 {
     XHCIState *xhci = usbport->opaque;
-    XHCIPort *port = &xhci->ports[usbport->index];
+    XHCIPort *port = xhci_lookup_port(xhci, usbport);
 
     xhci_update_port(xhci, port, 1);
 }
@@ -2675,9 +2709,9 @@ static void xhci_detach(USBPort *usbport)
 static void xhci_wakeup(USBPort *usbport)
 {
     XHCIState *xhci = usbport->opaque;
-    XHCIPort *port = &xhci->ports[usbport->index];
-    int nr = port->port.index + 1;
-    XHCIEvent ev = { ER_PORT_STATUS_CHANGE, CC_SUCCESS, nr << 24};
+    XHCIPort *port = xhci_lookup_port(xhci, usbport);
+    XHCIEvent ev = { ER_PORT_STATUS_CHANGE, CC_SUCCESS,
+                     port->portnr << 24};
     uint32_t pls;
 
     pls = (port->portsc >> PORTSC_PLS_SHIFT) & PORTSC_PLS_MASK;
@@ -2759,22 +2793,43 @@ static USBBusOps xhci_bus_ops = {
 
 static void usb_xhci_init(XHCIState *xhci, DeviceState *dev)
 {
-    int i;
+    XHCIPort *port;
+    int i, usbports, speedmask;
 
     xhci->usbsts = USBSTS_HCH;
 
+    if (xhci->numports_2 > MAXPORTS_2) {
+        xhci->numports_2 = MAXPORTS_2;
+    }
+    if (xhci->numports_3 > MAXPORTS_3) {
+        xhci->numports_3 = MAXPORTS_3;
+    }
+    usbports = MAX(xhci->numports_2, xhci->numports_3);
+    xhci->numports = xhci->numports_2 + xhci->numports_3;
+
     usb_bus_new(&xhci->bus, &xhci_bus_ops, &xhci->pci_dev.qdev);
 
-    for (i = 0; i < MAXPORTS; i++) {
-        memset(&xhci->ports[i], 0, sizeof(xhci->ports[i]));
-        usb_register_port(&xhci->bus, &xhci->ports[i].port, xhci, i,
-                          &xhci_port_ops,
-                          USB_SPEED_MASK_LOW  |
-                          USB_SPEED_MASK_FULL |
-                          USB_SPEED_MASK_HIGH);
-    }
-    for (i = 0; i < MAXSLOTS; i++) {
-        xhci->slots[i].enabled = 0;
+    for (i = 0; i < usbports; i++) {
+        speedmask = 0;
+        if (i < xhci->numports_2) {
+            port = &xhci->ports[i];
+            port->portnr = i + 1;
+            port->uport = &xhci->uports[i];
+            port->speedmask =
+                USB_SPEED_MASK_LOW  |
+                USB_SPEED_MASK_FULL |
+                USB_SPEED_MASK_HIGH;
+            speedmask |= port->speedmask;
+        }
+        if (i < xhci->numports_3) {
+            port = &xhci->ports[i + xhci->numports_2];
+            port->portnr = i + 1 + xhci->numports_2;
+            port->uport = &xhci->uports[i];
+            port->speedmask = USB_SPEED_MASK_SUPER;
+            speedmask |= port->speedmask;
+        }
+        usb_register_port(&xhci->bus, &xhci->uports[i], xhci, i,
+                          &xhci_port_ops, speedmask);
     }
 }
 
@@ -2830,6 +2885,8 @@ static const VMStateDescription vmstate_xhci = {
 
 static Property xhci_properties[] = {
     DEFINE_PROP_UINT32("msi", XHCIState, msi, 0),
+    DEFINE_PROP_UINT32("p2",  XHCIState, numports_2, 4),
+    DEFINE_PROP_UINT32("p3",  XHCIState, numports_3, 4),
     DEFINE_PROP_END_OF_LIST(),
 };