python39/python38.spec

1510 lines
50 KiB
RPMSpec
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# ==================
# Top-level metadata
# ==================
%global pybasever 3.8
# pybasever without the dot:
%global pyshortver 38
Name: python%{pyshortver}
Summary: Version %{pybasever} of the Python interpreter
URL: https://www.python.org/
# WARNING When rebasing to a new Python version,
# remember to update the python3-docs package as well
%global general_version %{pybasever}.0
%global prerel a3
%global upstream_version %{general_version}%{?prerel}
Version: %{general_version}%{?prerel:~%{prerel}}
Release: 1%{?dist}
License: Python
# ==================================
# Conditionals controlling the build
# ==================================
# Note that the bcond macros are named for the CLI option they create.
# "%%bcond_without" means "ENABLE by default and create a --without option"
# Flat package, i.e. python36, python37, python38 for tox etc.
# warning: changes some other defaults
# in Fedora, never turn this on for the python3 package
# and always keep it on for python37 etc.
# WARNING: This does not change the package name and summary above
%bcond_without flatpackage
# When bootstrapping python3, we need to build setuptools.
# but setuptools BR python3-devel and that brings in python3-rpm-generators;
# python3-rpm-generators needs python3-setuptools, so we cannot have it yet.
#
# Procedure: https://fedoraproject.org/wiki/SIGs/Python/UpgradingPython
#
# IMPORTANT: When bootstrapping, it's very likely the wheels for pip and
# setuptools are not available. Turn off the rpmwheels bcond until
# the two packages are built with wheels to get around the issue.
%bcond_with bootstrap
# Whether to use RPM build wheels from the python-{pip,setuptools}-wheel package
# Uses upstream bundled prebuilt wheels otherwise
%bcond_without rpmwheels
# Expensive optimizations (mainly, profile-guided optimizations)
%ifarch %{ix86} x86_64
%bcond_without optimizations
%else
# On some architectures, the optimized build takes tens of hours, possibly
# longer than Koji's 24-hour timeout. Disable optimizations here.
%bcond_with optimizations
%endif
# Run the test suite in %%check
%bcond_without tests
# Extra build for debugging the interpreter or C-API extensions
# (the -debug subpackages)
%if %{with flatpackage}
%bcond_with debug_build
%else
%bcond_without debug_build
%endif
# Support for the GDB debugger
%bcond_without gdb_hooks
# The dbm.gnu module (key-value database)
%bcond_without gdbm
# Main interpreter loop optimization
%bcond_without computed_gotos
# Support for the Valgrind debugger/profiler
%ifarch %{valgrind_arches}
%bcond_without valgrind
%else
%bcond_with valgrind
%endif
# =====================
# General global macros
# =====================
%global pylibdir %{_libdir}/python%{pybasever}
%global dynload_dir %{pylibdir}/lib-dynload
# ABIFLAGS, LDVERSION and SOABI are in the upstream configure.ac
# See PEP 3149 for some background: http://www.python.org/dev/peps/pep-3149/
%global ABIFLAGS_optimized m
%global ABIFLAGS_debug dm
%global LDVERSION_optimized %{pybasever}%{ABIFLAGS_optimized}
%global LDVERSION_debug %{pybasever}%{ABIFLAGS_debug}
%global SOABI_optimized cpython-%{pyshortver}%{ABIFLAGS_optimized}-%{_arch}-linux%{_gnu}
%global SOABI_debug cpython-%{pyshortver}%{ABIFLAGS_debug}-%{_arch}-linux%{_gnu}
# All bytecode files are in a __pycache__ subdirectory, with a name
# reflecting the version of the bytecode.
# See PEP 3147: http://www.python.org/dev/peps/pep-3147/
# For example,
# foo/bar.py
# has bytecode at:
# foo/__pycache__/bar.cpython-%%{pyshortver}.pyc
# foo/__pycache__/bar.cpython-%%{pyshortver}.opt-1.pyc
# foo/__pycache__/bar.cpython-%%{pyshortver}.opt-2.pyc
%global bytecode_suffixes .cpython-%{pyshortver}*.pyc
# Python's configure script defines SOVERSION, and this is used in the Makefile
# to determine INSTSONAME, the name of the libpython DSO:
# LDLIBRARY='libpython$(VERSION).so'
# INSTSONAME="$LDLIBRARY".$SOVERSION
# We mirror this here in order to make it easier to add the -gdb.py hooks.
# (if these get out of sync, the payload of the libs subpackage will fail
# and halt the build)
%global py_SOVERSION 1.0
%global py_INSTSONAME_optimized libpython%{LDVERSION_optimized}.so.%{py_SOVERSION}
%global py_INSTSONAME_debug libpython%{LDVERSION_debug}.so.%{py_SOVERSION}
# Disable automatic bytecompilation. The python3 binary is not yet be
# available in /usr/bin when Python is built. Also, the bytecompilation fails
# on files that test invalid syntax.
%undefine py_auto_byte_compile
# For multilib support, files that are different between 32- and 64-bit arches
# need different filenames. Use "64" or "32" according to the word size.
# Currently, the best way to determine an architecture's word size happens to
# be checking %%{_lib}.
%if "%{_lib}" == "lib64"
%global wordsize 64
%else
%global wordsize 32
%endif
# =======================
# Build-time requirements
# =======================
# (keep this list alphabetized)
BuildRequires: autoconf
BuildRequires: bluez-libs-devel
BuildRequires: bzip2
BuildRequires: bzip2-devel
BuildRequires: desktop-file-utils
BuildRequires: expat-devel
BuildRequires: findutils
BuildRequires: gcc-c++
%if %{with gdbm}
BuildRequires: gdbm-devel
%endif
BuildRequires: glibc-all-langpacks
BuildRequires: glibc-devel
BuildRequires: gmp-devel
BuildRequires: libappstream-glib
BuildRequires: libffi-devel
BuildRequires: libnsl2-devel
BuildRequires: libtirpc-devel
BuildRequires: libGL-devel
BuildRequires: libuuid-devel
BuildRequires: libX11-devel
BuildRequires: ncurses-devel
BuildRequires: openssl-devel
BuildRequires: pkgconfig
BuildRequires: readline-devel
BuildRequires: redhat-rpm-config >= 127
BuildRequires: sqlite-devel
BuildRequires: gdb
BuildRequires: tar
BuildRequires: tcl-devel
BuildRequires: tix-devel
BuildRequires: tk-devel
%if %{with valgrind}
BuildRequires: valgrind-devel
%endif
BuildRequires: xz-devel
BuildRequires: zlib-devel
BuildRequires: /usr/bin/dtrace
# workaround http://bugs.python.org/issue19804 (test_uuid requires ifconfig)
BuildRequires: /usr/sbin/ifconfig
%if %{with rpmwheels}
BuildRequires: python-setuptools-wheel
BuildRequires: python-pip-wheel
%endif
# =======================
# Source code and patches
# =======================
Source: https://www.python.org/ftp/python/%{general_version}/Python-%{upstream_version}.tar.xz
# A simple script to check timestamps of bytecode files
# Run in check section with Python that is currently being built
# Originally written by bkabrda
Source8: check-pyc-timestamps.py
# Desktop menu entry for idle3
Source10: idle3.desktop
# AppData file for idle3
Source11: idle3.appdata.xml
# 00001 #
# Fixup distutils/unixccompiler.py to remove standard library path from rpath:
# Was Patch0 in ivazquez' python3000 specfile:
Patch1: 00001-rpath.patch
# 00102 #
# Change the various install paths to use /usr/lib64/ instead or /usr/lib
# Only used when "%%{_lib}" == "lib64"
# Not yet sent upstream.
Patch102: 00102-lib64.patch
# 00111 #
# Patch the Makefile.pre.in so that the generated Makefile doesn't try to build
# a libpythonMAJOR.MINOR.a
# See https://bugzilla.redhat.com/show_bug.cgi?id=556092
# Downstream only: not appropriate for upstream
Patch111: 00111-no-static-lib.patch
# 00132 #
# Add non-standard hooks to unittest for use in the "check" phase below, when
# running selftests within the build:
# @unittest._skipInRpmBuild(reason)
# for tests that hang or fail intermittently within the build environment, and:
# @unittest._expectedFailureInRpmBuild
# for tests that always fail within the build environment
#
# The hooks only take effect if WITHIN_PYTHON_RPM_BUILD is set in the
# environment, which we set manually in the appropriate portion of the "check"
# phase below (and which potentially other python-* rpms could set, to reuse
# these unittest hooks in their own "check" phases)
Patch132: 00132-add-rpmbuild-hooks-to-unittest.patch
# 00160 #
# Python 3.3 added os.SEEK_DATA and os.SEEK_HOLE, which may be present in the
# header files in the build chroot, but may not be supported in the running
# kernel, hence we disable this test in an rpm build.
# Adding these was upstream issue http://bugs.python.org/issue10142
# Not yet sent upstream
Patch160: 00160-disable-test_fs_holes-in-rpm-build.patch
# 00163 #
# Some tests within test_socket fail intermittently when run inside Koji;
# disable them using unittest._skipInRpmBuild
# Not yet sent upstream
Patch163: 00163-disable-parts-of-test_socket-in-rpm-build.patch
# 00178 #
# Don't duplicate various FLAGS in sysconfig values
# http://bugs.python.org/issue17679
# Does not affect python2 AFAICS (different sysconfig values initialization)
Patch178: 00178-dont-duplicate-flags-in-sysconfig.patch
# 00189 #
# Instead of bundled wheels, use our RPM packaged wheels from
# /usr/share/python-wheels
Patch189: 00189-use-rpm-wheels.patch
# 00205 #
# LIBPL variable in makefile takes LIBPL from configure.ac
# but the LIBPL variable defined there doesn't respect libdir macro
Patch205: 00205-make-libpl-respect-lib64.patch
# 00251
# Set values of prefix and exec_prefix in distutils install command
# to /usr/local if executable is /usr/bin/python* and RPM build
# is not detected to make pip and distutils install into separate location
# Fedora Change: https://fedoraproject.org/wiki/Changes/Making_sudo_pip_safe
Patch251: 00251-change-user-install-location.patch
# 00274 #
# Upstream uses Debian-style architecture naming. Change to match Fedora.
Patch274: 00274-fix-arch-names.patch
# 00316 #
# We remove the exe files from distutil's bdist_wininst
# So we mark the command as unsupported - and the tests are skipped
Patch316: 00316-mark-bdist_wininst-unsupported.patch
# (New patches go here ^^^)
#
# When adding new patches to "python" and "python3" in Fedora, EL, etc.,
# please try to keep the patch numbers in-sync between all specfiles.
#
# More information, and a patch number catalog, is at:
#
# https://fedoraproject.org/wiki/SIGs/Python/PythonPatches
# ==========================================
# Descriptions, and metadata for subpackages
# ==========================================
# People might want to dnf install pythonX.Y instead of pythonXY;
# we enable this in both flat and nonflat package.
Provides: python%{pybasever} = %{version}-%{release}
%if %{without flatpackage}
# Packages with Python modules in standard locations automatically
# depend on python(abi). Provide that here.
Provides: python(abi) = %{pybasever}
Requires: %{name}-libs%{?_isa} = %{version}-%{release}
# In order to support multiple Python interpreters for development purposes,
# packages with the naming scheme flatpackage (e.g. python35) exist for
# non-default versions of Python 3.
# For consistency, and to keep the upgrade path clean, we Provide/Obsolete
# these names here.
Provides: python%{pyshortver} = %{version}-%{release}
# Note that using Obsoletes without package version is not standard practice.
# Here we assert that *any* version of the system's default interpreter is
# preferable to an "extra" interpreter. For example, python3-3.6.1 will
# replace python36-3.6.2.
Obsoletes: python%{pyshortver}
# Previously, this was required for our rewheel patch to work.
# This is technically no longer needed, but we keep it recommended
# for the developer experience.
Recommends: python3-setuptools
Recommends: python3-pip
# This prevents ALL subpackages built from this spec to require
# /usr/bin/python3*. Granularity per subpackage is impossible.
# It's intended for the libs package not to drag in the interpreter, see
# https://bugzilla.redhat.com/show_bug.cgi?id=1547131
# All others require %%{name} anyway.
%global __requires_exclude ^/usr/bin/python3
# The description used both for the SRPM and the main `python3` subpackage:
%description
Python is an accessible, high-level, dynamically typed, interpreted programming
language, designed with an emphasis on code readability.
It includes an extensive standard library, and has a vast ecosystem of
third-party libraries.
The %{name} package provides the "python3" executable: the reference
interpreter for the Python language, version 3.
The majority of its standard library is provided in the %{name}-libs package,
which should be installed automatically along with %{name}.
The remaining parts of the Python standard library are broken out into the
%{name}-tkinter and %{name}-test packages, which may need to be installed
separately.
Documentation for Python is provided in the %{name}-docs package.
Packages containing additional libraries for Python are generally named with
the "%{name}-" prefix.
%package libs
Summary: Python runtime libraries
%if %{with rpmwheels}
Requires: python-setuptools-wheel
Requires: python-pip-wheel
%else
Provides: bundled(python3-pip) = 19.0.3
Provides: bundled(python3-setuptools) = 40.8.0
%endif
# There are files in the standard library that have python shebang.
# We've filtered the automatic requirement out so libs are installable without
# the main package. This however makes it pulled in by default.
# See https://bugzilla.redhat.com/show_bug.cgi?id=1547131
Recommends: %{name}%{?_isa} = %{version}-%{release}
%description libs
This package contains runtime libraries for use by Python:
- the majority of the Python standard library
- a dynamically linked library for use by applications that embed Python as
a scripting language, and by the main "python3" executable
%package devel
Summary: Libraries and header files needed for Python development
Requires: %{name} = %{version}-%{release}
Requires: %{name}-libs%{?_isa} = %{version}-%{release}
BuildRequires: python-rpm-macros
Requires: python-rpm-macros
Requires: python3-rpm-macros
%if %{without bootstrap}
# This is not "API" (packages that need setuptools should still BuildRequire it)
# However some packages apparently can build both with and without setuptools
# producing egg-info as file or directory (depending on setuptools presence).
# Directory-to-file updates are problematic in RPM, so we ensure setuptools is
# installed when -devel is required.
# See https://bugzilla.redhat.com/show_bug.cgi?id=1623914
# See https://fedoraproject.org/wiki/Packaging:Directory_Replacement
Requires: python3-setuptools
Requires: python3-rpm-generators
%endif
Provides: %{name}-2to3 = %{version}-%{release}
Provides: 2to3 = %{version}-%{release}
Conflicts: %{name} < %{version}-%{release}
%description devel
This package contains the header files and configuration needed to compile
Python extension modules (typically written in C or C++), to embed Python
into other programs, and to make binary distributions for Python libraries.
It also contains the necessary macros to build RPM packages with Python modules
and 2to3 tool, an automatic source converter from Python 2.X.
%package idle
Summary: A basic graphical development environment for Python
Requires: %{name} = %{version}-%{release}
Requires: %{name}-tkinter = %{version}-%{release}
Provides: idle3 = %{version}-%{release}
Provides: %{name}-tools = %{version}-%{release}
Provides: %{name}-tools%{?_isa} = %{version}-%{release}
Obsoletes: %{name}-tools < %{version}-%{release}
%description idle
IDLE is Pythons Integrated Development and Learning Environment.
IDLE has the following features: Python shell window (interactive
interpreter) with colorizing of code input, output, and error messages;
multi-window text editor with multiple undo, Python colorizing,
smart indent, call tips, auto completion, and other features;
search within any window, replace within editor windows, and
search through multiple files (grep); debugger with persistent
breakpoints, stepping, and viewing of global and local namespaces;
configuration, browsers, and other dialogs.
%package tkinter
Summary: A GUI toolkit for Python
Requires: %{name} = %{version}-%{release}
%description tkinter
The Tkinter (Tk interface) library is a graphical user interface toolkit for
the Python programming language.
%package test
Summary: The self-test suite for the main python3 package
Requires: %{name} = %{version}-%{release}
Requires: %{name}-libs%{?_isa} = %{version}-%{release}
%description test
The self-test suite for the Python interpreter.
This is only useful to test Python itself. For testing general Python code,
you should use the unittest module from %{name}-libs, or a library such as
%{name}-pytest or %{name}-nose.
%if %{with debug_build}
%package debug
Summary: Debug version of the Python runtime
# The debug build is an all-in-one package version of the regular build, and
# shares the same .py/.pyc files and directories as the regular build. Hence
# we depend on all of the subpackages of the regular build:
Requires: %{name}%{?_isa} = %{version}-%{release}
Requires: %{name}-libs%{?_isa} = %{version}-%{release}
Requires: %{name}-devel%{?_isa} = %{version}-%{release}
Requires: %{name}-test%{?_isa} = %{version}-%{release}
Requires: %{name}-tkinter%{?_isa} = %{version}-%{release}
Requires: %{name}-idle%{?_isa} = %{version}-%{release}
%description debug
python3-debug provides a version of the Python runtime with numerous debugging
features enabled, aimed at advanced Python users such as developers of Python
extension modules.
This version uses more memory and will be slower than the regular Python build,
but is useful for tracking down reference-counting issues and other bugs.
The bytecode format is unchanged, so that .pyc files are compatible between
this and the standard version of Python, but the debugging features mean that
C/C++ extension modules are ABI-incompatible and must be built for each version
separately.
The debug build shares installation directories with the standard Python
runtime, so that .py and .pyc files can be shared.
Compiled extension modules use a special ABI flag ("d") in the filename,
so extensions for both versions can co-exist in the same directory.
%endif # with debug_build
%else # with flatpackage
# We'll not provide this, on purpose
# No package in Fedora shall ever depend on flatpackage via this
%global __requires_exclude ^python\\(abi\\) = 3\\..$
%global __provides_exclude ^python\\(abi\\) = 3\\..$
%if %{with rpmwheels}
Requires: python-setuptools-wheel
Requires: python-pip-wheel
%else
Provides: bundled(python3-pip) = 19.0.3
Provides: bundled(python3-setuptools) = 40.8.0
%endif
# The description for the flat package
%description
Python %{pybasever} package for developers.
This package exists to allow developers to test their code against a newer
version of Python. This is not a full Python stack and if you wish to run
your applications with Python %{pybasever}, update your Fedora to a newer
version once Python %{pybasever} is stable.
%endif # with flatpackage
# ======================================================
# The prep phase of the build:
# ======================================================
%prep
%setup -q -n Python-%{upstream_version}
# Remove all exe files to ensure we are not shipping prebuilt binaries
# note that those are only used to create Microsoft Windows installers
# and that functionality is broken on Linux anyway
find -name '*.exe' -print -delete
# Remove bundled libraries to ensure that we're using the system copy.
rm -r Modules/expat
#
# Apply patches:
#
%patch1 -p1
%if "%{_lib}" == "lib64"
%patch102 -p1
%endif
%patch111 -p1
%patch132 -p1
%patch160 -p1
%patch163 -p1
%patch178 -p1
%if %{with rpmwheels}
%patch189 -p1
rm Lib/ensurepip/_bundled/*.whl
%endif
%patch205 -p1
%patch251 -p1
%patch274 -p1
%patch316 -p1
# Remove files that should be generated by the build
# (This is after patching, so that we can use patches directly from upstream)
rm configure pyconfig.h.in
# ======================================================
# Configuring and building the code:
# ======================================================
%build
# Regenerate the configure script and pyconfig.h.in
autoconf
autoheader
# Remember the current directory (which has sources and the configure script),
# so we can refer to it after we "cd" elsewhere.
topdir=$(pwd)
# Get proper option names from bconds
%if %{with computed_gotos}
%global computed_gotos_flag yes
%else
%global computed_gotos_flag no
%endif
%if %{with optimizations}
%global optimizations_flag "--enable-optimizations"
%else
%global optimizations_flag "--disable-optimizations"
%endif
# Set common compiler/linker flags
# We utilize the %%extension_...flags macros here so users building C/C++
# extensions with our python won't get all the compiler/linker flags used
# in Fedora RPMs.
# Standard library built here will still use the %%build_...flags,
# Fedora packages utilizing %%py3_build will use them as well
# https://fedoraproject.org/wiki/Changes/Python_Extension_Flags
export CFLAGS="%{extension_cflags} -D_GNU_SOURCE -fPIC -fwrapv"
export CFLAGS_NODIST="%{build_cflags} -D_GNU_SOURCE -fPIC -fwrapv"
export CXXFLAGS="%{extension_cxxflags} -D_GNU_SOURCE -fPIC -fwrapv"
export CPPFLAGS="$(pkg-config --cflags-only-I libffi)"
export OPT="%{extension_cflags} -D_GNU_SOURCE -fPIC -fwrapv"
export LINKCC="gcc"
export CFLAGS="$CFLAGS $(pkg-config --cflags openssl)"
export LDFLAGS="%{extension_ldflags} -g $(pkg-config --libs-only-L openssl)"
export LDFLAGS_NODIST="%{build_ldflags} -g $(pkg-config --libs-only-L openssl)"
# We can build several different configurations of Python: regular and debug.
# Define a common function that does one build:
BuildPython() {
ConfName=$1
ExtraConfigArgs=$2
MoreCFlags=$3
# Each build is done in its own directory
ConfDir=build/$ConfName
echo STARTING: BUILD OF PYTHON FOR CONFIGURATION: $ConfName
mkdir -p $ConfDir
pushd $ConfDir
# Normally, %%configure looks for the "configure" script in the current
# directory.
# Since we changed directories, we need to tell %%configure where to look.
%global _configure $topdir/configure
%configure \
--enable-ipv6 \
--enable-shared \
--with-computed-gotos=%{computed_gotos_flag} \
--with-dbmliborder=gdbm:ndbm:bdb \
--with-system-expat \
--with-system-ffi \
--enable-loadable-sqlite-extensions \
--with-dtrace \
--with-lto \
--with-ssl-default-suites=openssl \
%if %{with valgrind}
--with-valgrind \
%endif
$ExtraConfigArgs \
%{nil}
# Invoke the build
make EXTRA_CFLAGS="$CFLAGS $MoreCFlags" %{?_smp_mflags}
popd
echo FINISHED: BUILD OF PYTHON FOR CONFIGURATION: $ConfName
}
# Call the above to build each configuration.
%if %{with debug_build}
BuildPython debug \
"--without-ensurepip --with-pydebug" \
"-Og"
%endif # with debug_build
BuildPython optimized \
"--without-ensurepip %{optimizations_flag}" \
""
# ======================================================
# Installing the built code:
# ======================================================
%install
# As in %%build, remember the current directory
topdir=$(pwd)
# We install a collection of hooks for gdb that make it easier to debug
# executables linked against libpython3* (such as /usr/bin/python3 itself)
#
# These hooks are implemented in Python itself (though they are for the version
# of python that gdb is linked with)
#
# gdb-archer looks for them in the same path as the ELF file or its .debug
# file, with a -gdb.py suffix.
# We put them next to the debug file, because ldconfig would complain if
# it found non-library files directly in /usr/lib/
# (see https://bugzilla.redhat.com/show_bug.cgi?id=562980)
#
# We'll put these files in the debuginfo package by installing them to e.g.:
# /usr/lib/debug/usr/lib/libpython3.2.so.1.0.debug-gdb.py
# (note that the debug path is /usr/lib/debug for both 32/64 bit)
#
# See https://fedoraproject.org/wiki/Features/EasierPythonDebugging for more
# information
%if %{with gdb_hooks}
DirHoldingGdbPy=%{_prefix}/lib/debug/%{_libdir}
mkdir -p %{buildroot}$DirHoldingGdbPy
%endif # with gdb_hooks
# Multilib support for pyconfig.h
# 32- and 64-bit versions of pyconfig.h are different. For multilib support
# (making it possible to install 32- and 64-bit versions simultaneously),
# we need to install them under different filenames, and to make the common
# "pyconfig.h" include the right file based on architecture.
# See https://bugzilla.redhat.com/show_bug.cgi?id=192747
# Filanames are defined here:
%global _pyconfig32_h pyconfig-32.h
%global _pyconfig64_h pyconfig-64.h
%global _pyconfig_h pyconfig-%{wordsize}.h
# Use a common function to do an install for all our configurations:
InstallPython() {
ConfName=$1
PyInstSoName=$2
MoreCFlags=$3
LDVersion=$4
# Switch to the directory with this configuration's built files
ConfDir=build/$ConfName
echo STARTING: INSTALL OF PYTHON FOR CONFIGURATION: $ConfName
mkdir -p $ConfDir
pushd $ConfDir
make \
DESTDIR=%{buildroot} \
INSTALL="install -p" \
EXTRA_CFLAGS="$MoreCFlags" \
install
popd
%if %{with gdb_hooks}
# See comment on $DirHoldingGdbPy above
PathOfGdbPy=$DirHoldingGdbPy/$PyInstSoName-%{version}-%{release}.%{_arch}.debug-gdb.py
cp Tools/gdb/libpython.py %{buildroot}$PathOfGdbPy
%endif # with gdb_hooks
# Rename the -devel script that differs on different arches to arch specific name
mv %{buildroot}%{_bindir}/python${LDVersion}-{,`uname -m`-}config
echo -e '#!/bin/sh\nexec `dirname $0`/python'${LDVersion}'-`uname -m`-config "$@"' > \
%{buildroot}%{_bindir}/python${LDVersion}-config
echo '[ $? -eq 127 ] && echo "Could not find python'${LDVersion}'-`uname -m`-config. Look around to see available arches." >&2' >> \
%{buildroot}%{_bindir}/python${LDVersion}-config
chmod +x %{buildroot}%{_bindir}/python${LDVersion}-config
# Make python3-devel multilib-ready
mv %{buildroot}%{_includedir}/python${LDVersion}/pyconfig.h \
%{buildroot}%{_includedir}/python${LDVersion}/%{_pyconfig_h}
cat > %{buildroot}%{_includedir}/python${LDVersion}/pyconfig.h << EOF
#include <bits/wordsize.h>
#if __WORDSIZE == 32
#include "%{_pyconfig32_h}"
#elif __WORDSIZE == 64
#include "%{_pyconfig64_h}"
#else
#error "Unknown word size"
#endif
EOF
echo FINISHED: INSTALL OF PYTHON FOR CONFIGURATION: $ConfName
}
# Install the "debug" build first; any common files will be overridden with
# later builds
%if %{with debug_build}
InstallPython debug \
%{py_INSTSONAME_debug} \
-O0 \
%{LDVERSION_debug}
%endif # with debug_build
# Now the optimized build:
InstallPython optimized \
%{py_INSTSONAME_optimized} \
"" \
%{LDVERSION_optimized}
# Install directories for additional packages
install -d -m 0755 %{buildroot}%{pylibdir}/site-packages/__pycache__
%if "%{_lib}" == "lib64"
# The 64-bit version needs to create "site-packages" in /usr/lib/ (for
# pure-Python modules) as well as in /usr/lib64/ (for packages with extension
# modules).
# Note that rpmlint will complain about hardcoded library path;
# this is intentional.
install -d -m 0755 %{buildroot}%{_prefix}/lib/python%{pybasever}/site-packages/__pycache__
%endif
%if %{without flatpackage}
# add idle3 to menu
install -D -m 0644 Lib/idlelib/Icons/idle_16.png %{buildroot}%{_datadir}/icons/hicolor/16x16/apps/idle3.png
install -D -m 0644 Lib/idlelib/Icons/idle_32.png %{buildroot}%{_datadir}/icons/hicolor/32x32/apps/idle3.png
install -D -m 0644 Lib/idlelib/Icons/idle_48.png %{buildroot}%{_datadir}/icons/hicolor/48x48/apps/idle3.png
desktop-file-install --dir=%{buildroot}%{_datadir}/applications %{SOURCE10}
# Install and validate appdata file
mkdir -p %{buildroot}%{_metainfodir}
cp -a %{SOURCE11} %{buildroot}%{_metainfodir}
appstream-util validate-relax --nonet %{buildroot}%{_metainfodir}/idle3.appdata.xml
%endif
# Make sure distutils looks at the right pyconfig.h file
# See https://bugzilla.redhat.com/show_bug.cgi?id=201434
# Similar for sysconfig: sysconfig.get_config_h_filename tries to locate
# pyconfig.h so it can be parsed, and needs to do this at runtime in site.py
# when python starts up (see https://bugzilla.redhat.com/show_bug.cgi?id=653058)
#
# Split this out so it goes directly to the pyconfig-32.h/pyconfig-64.h
# variants:
sed -i -e "s/'pyconfig.h'/'%{_pyconfig_h}'/" \
%{buildroot}%{pylibdir}/distutils/sysconfig.py \
%{buildroot}%{pylibdir}/sysconfig.py
# Install pathfix.py to bindir
# See https://github.com/fedora-python/python-rpm-porting/issues/24
cp -p Tools/scripts/pathfix.py %{buildroot}%{_bindir}/
# Install i18n tools to bindir
# They are also in python2, so we version them
# https://bugzilla.redhat.com/show_bug.cgi?id=1571474
for tool in pygettext msgfmt; do
cp -p Tools/i18n/${tool}.py %{buildroot}%{_bindir}/${tool}%{pybasever}.py
ln -s ${tool}%{pybasever}.py %{buildroot}%{_bindir}/${tool}3.py
done
# Switch all shebangs to refer to the specific Python version.
# This currently only covers files matching ^[a-zA-Z0-9_]+\.py$,
# so handle files named using other naming scheme separately.
LD_LIBRARY_PATH=./build/optimized ./build/optimized/python \
Tools/scripts/pathfix.py \
-i "%{_bindir}/python%{pybasever}" -pn \
%{buildroot} \
%{buildroot}%{_bindir}/*%{pybasever}.py \
%{?with_gdb_hooks:%{buildroot}$DirHoldingGdbPy/*.py}
# Remove tests for python3-tools which was removed in
# https://bugzilla.redhat.com/show_bug.cgi?id=1312030
rm -rf %{buildroot}%{pylibdir}/test/test_tools
# Remove shebang lines from .py files that aren't executable, and
# remove executability from .py files that don't have a shebang line:
find %{buildroot} -name \*.py \
\( \( \! -perm /u+x,g+x,o+x -exec sed -e '/^#!/Q 0' -e 'Q 1' {} \; \
-print -exec sed -i '1d' {} \; \) -o \( \
-perm /u+x,g+x,o+x ! -exec grep -m 1 -q '^#!' {} \; \
-exec chmod a-x {} \; \) \)
# Get rid of DOS batch files:
find %{buildroot} -name \*.bat -exec rm {} \;
# Get rid of backup files:
find %{buildroot}/ -name "*~" -exec rm -f {} \;
find . -name "*~" -exec rm -f {} \;
# Get rid of a stray copy of the license:
rm %{buildroot}%{pylibdir}/LICENSE.txt
# Do bytecompilation with the newly installed interpreter.
# This is similar to the script in macros.pybytecompile
# compile *.pyc
find %{buildroot} -type f -a -name "*.py" -print0 | \
LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \
PYTHONPATH="%{buildroot}%{_libdir}/python%{pybasever} %{buildroot}%{_libdir}/python%{pybasever}/site-packages" \
xargs -0 %{buildroot}%{_bindir}/python%{pybasever} -O -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("%{buildroot}")[2], optimize=opt) for opt in range(3) for f in sys.argv[1:]]' || :
# Since we have pathfix.py in bindir, this is created, but we don't want it
rm -rf %{buildroot}%{_bindir}/__pycache__
# Fixup permissions for shared libraries from non-standard 555 to standard 755:
find %{buildroot} -perm 555 -exec chmod 755 {} \;
# Create "/usr/bin/python3-debug", a symlink to the python3 debug binary, to
# avoid the user having to know the precise version and ABI flags.
# See e.g. https://bugzilla.redhat.com/show_bug.cgi?id=676748
%if %{with debug_build} && %{without flatpackage}
ln -s \
%{_bindir}/python%{LDVERSION_debug} \
%{buildroot}%{_bindir}/python3-debug
%endif
# There's 2to3-X.X executable and 2to3 soft link to it.
# No reason to have both, so keep only 2to3 as an executable.
# See https://bugzilla.redhat.com/show_bug.cgi?id=1111275
mv %{buildroot}%{_bindir}/2to3-%{pybasever} %{buildroot}%{_bindir}/2to3
%if %{with flatpackage}
# Remove stuff that would conflict with python3 package
rm %{buildroot}%{_bindir}/python3
rm %{buildroot}%{_bindir}/pydoc3
rm %{buildroot}%{_bindir}/pathfix.py
rm %{buildroot}%{_bindir}/pygettext3.py
rm %{buildroot}%{_bindir}/msgfmt3.py
rm %{buildroot}%{_bindir}/idle3
rm %{buildroot}%{_bindir}/python3-*
rm %{buildroot}%{_bindir}/2to3
rm %{buildroot}%{_libdir}/libpython3.so
rm %{buildroot}%{_mandir}/man1/python3.1*
rm %{buildroot}%{_libdir}/pkgconfig/python3.pc
%endif
# ======================================================
# Checks for packaging issues
# ======================================================
%check
# first of all, check timestamps of bytecode files
find %{buildroot} -type f -a -name "*.py" -print0 | \
LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \
PYTHONPATH="%{buildroot}%{_libdir}/python%{pybasever} %{buildroot}%{_libdir}/python%{pybasever}/site-packages" \
xargs -0 %{buildroot}%{_bindir}/python%{pybasever} %{SOURCE8}
# Ensure that the curses module was linked against libncursesw.so, rather than
# libncurses.so
# See https://bugzilla.redhat.com/show_bug.cgi?id=539917
ldd %{buildroot}/%{dynload_dir}/_curses*.so \
| grep curses \
| grep libncurses.so && (echo "_curses.so linked against libncurses.so" ; exit 1)
# Ensure that the debug modules are linked against the debug libpython, and
# likewise for the optimized modules and libpython:
for Module in %{buildroot}/%{dynload_dir}/*.so ; do
case $Module in
*.%{SOABI_debug})
ldd $Module | grep %{py_INSTSONAME_optimized} &&
(echo Debug module $Module linked against optimized %{py_INSTSONAME_optimized} ; exit 1)
;;
*.%{SOABI_optimized})
ldd $Module | grep %{py_INSTSONAME_debug} &&
(echo Optimized module $Module linked against debug %{py_INSTSONAME_debug} ; exit 1)
;;
esac
done
# ======================================================
# Running the upstream test suite
# ======================================================
topdir=$(pwd)
CheckPython() {
ConfName=$1
ConfDir=$(pwd)/build/$ConfName
# Fedora sets TLSv1 as explicit minimum version.
# Python's test suite assumes that the minimum protocol version is set to
# a magic marker. We workaround the test problem by setting:
export OPENSSL_CONF=/non-existing-file
# https://bugzilla.redhat.com/show_bug.cgi?id=1618753
echo STARTING: CHECKING OF PYTHON FOR CONFIGURATION: $ConfName
# Note that we're running the tests using the version of the code in the
# builddir, not in the buildroot.
# Show some info, helpful for debugging test failures
LD_LIBRARY_PATH=$ConfDir $ConfDir/python -m test.pythoninfo
# Run the upstream test suite, setting "WITHIN_PYTHON_RPM_BUILD" so that the
# our non-standard decorators take effect on the relevant tests:
# @unittest._skipInRpmBuild(reason)
# @unittest._expectedFailureInRpmBuild
# test_asyncio skipped:
# https://bugs.python.org/issue35998
WITHIN_PYTHON_RPM_BUILD= \
LD_LIBRARY_PATH=$ConfDir $ConfDir/python -m test.regrtest \
-wW --slowest -j0 \
-x test_distutils \
-x test_bdist_rpm \
-x test_gdb \
%ifarch %{mips64}
-x test_ctypes \
%endif
%ifarch ppc64le
-x test_buffer \
%endif
-x test_asyncio \
echo FINISHED: CHECKING OF PYTHON FOR CONFIGURATION: $ConfName
}
%if %{with tests}
# Check each of the configurations:
%if %{with debug_build}
CheckPython debug
%endif # with debug_build
CheckPython optimized
%endif # with tests
%files
%license LICENSE
%doc README.rst
%if %{without flatpackage}
%{_bindir}/pydoc*
%{_bindir}/python3
%else
%{_bindir}/pydoc%{pybasever}
%endif
%{_bindir}/python%{pybasever}
%{_bindir}/python%{pybasever}m
%{_mandir}/*/*
%if %{without flatpackage}
%files libs
%license LICENSE
%doc README.rst
%endif
%dir %{pylibdir}
%dir %{dynload_dir}
%{pylibdir}/lib2to3
%if %{without flatpackage}
%exclude %{pylibdir}/lib2to3/tests
%endif
%dir %{pylibdir}/unittest/
%dir %{pylibdir}/unittest/__pycache__/
%{pylibdir}/unittest/*.py
%{pylibdir}/unittest/__pycache__/*%{bytecode_suffixes}
%dir %{pylibdir}/asyncio/
%dir %{pylibdir}/asyncio/__pycache__/
%{pylibdir}/asyncio/*.py
%{pylibdir}/asyncio/__pycache__/*%{bytecode_suffixes}
%dir %{pylibdir}/venv/
%dir %{pylibdir}/venv/__pycache__/
%{pylibdir}/venv/*.py
%{pylibdir}/venv/__pycache__/*%{bytecode_suffixes}
%{pylibdir}/venv/scripts
%{pylibdir}/wsgiref
%{pylibdir}/xmlrpc
%dir %{pylibdir}/ensurepip/
%dir %{pylibdir}/ensurepip/__pycache__/
%{pylibdir}/ensurepip/*.py
%{pylibdir}/ensurepip/__pycache__/*%{bytecode_suffixes}
%if %{with rpmwheels}
%exclude %{pylibdir}/ensurepip/_bundled
%else
%dir %{pylibdir}/ensurepip/_bundled
%{pylibdir}/ensurepip/_bundled/*.whl
%endif
# The majority of the test module lives in the test subpackage
# However test.support is in libs - it contains stuff used when testing your code
# https://bugzilla.redhat.com/show_bug.cgi?id=596258
%if %{without flatpackage}
%dir %{pylibdir}/test/
%dir %{pylibdir}/test/__pycache__/
%dir %{pylibdir}/test/support/
%dir %{pylibdir}/test/support/__pycache__/
%{pylibdir}/test/__init__.py
%{pylibdir}/test/__pycache__/__init__%{bytecode_suffixes}
%{pylibdir}/test/support/*.py
%{pylibdir}/test/support/__pycache__/*%{bytecode_suffixes}
%endif
%dir %{pylibdir}/concurrent/
%dir %{pylibdir}/concurrent/__pycache__/
%{pylibdir}/concurrent/*.py
%{pylibdir}/concurrent/__pycache__/*%{bytecode_suffixes}
%dir %{pylibdir}/concurrent/futures/
%dir %{pylibdir}/concurrent/futures/__pycache__/
%{pylibdir}/concurrent/futures/*.py
%{pylibdir}/concurrent/futures/__pycache__/*%{bytecode_suffixes}
%{pylibdir}/pydoc_data
%{dynload_dir}/_blake2.%{SOABI_optimized}.so
%{dynload_dir}/_md5.%{SOABI_optimized}.so
%{dynload_dir}/_sha1.%{SOABI_optimized}.so
%{dynload_dir}/_sha256.%{SOABI_optimized}.so
%{dynload_dir}/_sha3.%{SOABI_optimized}.so
%{dynload_dir}/_sha512.%{SOABI_optimized}.so
%{dynload_dir}/_asyncio.%{SOABI_optimized}.so
%{dynload_dir}/_bisect.%{SOABI_optimized}.so
%{dynload_dir}/_bz2.%{SOABI_optimized}.so
%{dynload_dir}/_codecs_cn.%{SOABI_optimized}.so
%{dynload_dir}/_codecs_hk.%{SOABI_optimized}.so
%{dynload_dir}/_codecs_iso2022.%{SOABI_optimized}.so
%{dynload_dir}/_codecs_jp.%{SOABI_optimized}.so
%{dynload_dir}/_codecs_kr.%{SOABI_optimized}.so
%{dynload_dir}/_codecs_tw.%{SOABI_optimized}.so
%{dynload_dir}/_contextvars.%{SOABI_optimized}.so
%{dynload_dir}/_crypt.%{SOABI_optimized}.so
%{dynload_dir}/_csv.%{SOABI_optimized}.so
%{dynload_dir}/_ctypes.%{SOABI_optimized}.so
%{dynload_dir}/_curses.%{SOABI_optimized}.so
%{dynload_dir}/_curses_panel.%{SOABI_optimized}.so
%{dynload_dir}/_dbm.%{SOABI_optimized}.so
%{dynload_dir}/_decimal.%{SOABI_optimized}.so
%{dynload_dir}/_elementtree.%{SOABI_optimized}.so
%if %{with gdbm}
%{dynload_dir}/_gdbm.%{SOABI_optimized}.so
%endif
%{dynload_dir}/_hashlib.%{SOABI_optimized}.so
%{dynload_dir}/_heapq.%{SOABI_optimized}.so
%{dynload_dir}/_json.%{SOABI_optimized}.so
%{dynload_dir}/_lsprof.%{SOABI_optimized}.so
%{dynload_dir}/_lzma.%{SOABI_optimized}.so
%{dynload_dir}/_multibytecodec.%{SOABI_optimized}.so
%{dynload_dir}/_multiprocessing.%{SOABI_optimized}.so
%{dynload_dir}/_opcode.%{SOABI_optimized}.so
%{dynload_dir}/_pickle.%{SOABI_optimized}.so
%{dynload_dir}/_posixsubprocess.%{SOABI_optimized}.so
%{dynload_dir}/_queue.%{SOABI_optimized}.so
%{dynload_dir}/_random.%{SOABI_optimized}.so
%{dynload_dir}/_socket.%{SOABI_optimized}.so
%{dynload_dir}/_sqlite3.%{SOABI_optimized}.so
%{dynload_dir}/_ssl.%{SOABI_optimized}.so
%{dynload_dir}/_struct.%{SOABI_optimized}.so
%{dynload_dir}/array.%{SOABI_optimized}.so
%{dynload_dir}/audioop.%{SOABI_optimized}.so
%{dynload_dir}/binascii.%{SOABI_optimized}.so
%{dynload_dir}/cmath.%{SOABI_optimized}.so
%{dynload_dir}/_datetime.%{SOABI_optimized}.so
%{dynload_dir}/fcntl.%{SOABI_optimized}.so
%{dynload_dir}/grp.%{SOABI_optimized}.so
%{dynload_dir}/math.%{SOABI_optimized}.so
%{dynload_dir}/mmap.%{SOABI_optimized}.so
%{dynload_dir}/nis.%{SOABI_optimized}.so
%{dynload_dir}/ossaudiodev.%{SOABI_optimized}.so
%{dynload_dir}/parser.%{SOABI_optimized}.so
%{dynload_dir}/_posixshmem.%{SOABI_optimized}.so
%{dynload_dir}/pyexpat.%{SOABI_optimized}.so
%{dynload_dir}/readline.%{SOABI_optimized}.so
%{dynload_dir}/resource.%{SOABI_optimized}.so
%{dynload_dir}/select.%{SOABI_optimized}.so
%{dynload_dir}/spwd.%{SOABI_optimized}.so
%{dynload_dir}/syslog.%{SOABI_optimized}.so
%{dynload_dir}/termios.%{SOABI_optimized}.so
%{dynload_dir}/_testmultiphase.%{SOABI_optimized}.so
%{dynload_dir}/unicodedata.%{SOABI_optimized}.so
%{dynload_dir}/_uuid.%{SOABI_optimized}.so
%{dynload_dir}/xxlimited.%{SOABI_optimized}.so
%{dynload_dir}/_xxsubinterpreters.%{SOABI_optimized}.so
%{dynload_dir}/zlib.%{SOABI_optimized}.so
%dir %{pylibdir}/site-packages/
%dir %{pylibdir}/site-packages/__pycache__/
%{pylibdir}/site-packages/README.txt
%{pylibdir}/*.py
%dir %{pylibdir}/__pycache__/
%{pylibdir}/__pycache__/*%{bytecode_suffixes}
%dir %{pylibdir}/collections/
%dir %{pylibdir}/collections/__pycache__/
%{pylibdir}/collections/*.py
%{pylibdir}/collections/__pycache__/*%{bytecode_suffixes}
%dir %{pylibdir}/ctypes/
%dir %{pylibdir}/ctypes/__pycache__/
%{pylibdir}/ctypes/*.py
%{pylibdir}/ctypes/__pycache__/*%{bytecode_suffixes}
%{pylibdir}/ctypes/macholib
%{pylibdir}/curses
%dir %{pylibdir}/dbm/
%dir %{pylibdir}/dbm/__pycache__/
%{pylibdir}/dbm/*.py
%{pylibdir}/dbm/__pycache__/*%{bytecode_suffixes}
%dir %{pylibdir}/distutils/
%dir %{pylibdir}/distutils/__pycache__/
%{pylibdir}/distutils/*.py
%{pylibdir}/distutils/__pycache__/*%{bytecode_suffixes}
%{pylibdir}/distutils/README
%{pylibdir}/distutils/command
%dir %{pylibdir}/email/
%dir %{pylibdir}/email/__pycache__/
%{pylibdir}/email/*.py
%{pylibdir}/email/__pycache__/*%{bytecode_suffixes}
%{pylibdir}/email/mime
%doc %{pylibdir}/email/architecture.rst
%{pylibdir}/encodings
%{pylibdir}/html
%{pylibdir}/http
%dir %{pylibdir}/importlib/
%dir %{pylibdir}/importlib/__pycache__/
%{pylibdir}/importlib/*.py
%{pylibdir}/importlib/__pycache__/*%{bytecode_suffixes}
%dir %{pylibdir}/json/
%dir %{pylibdir}/json/__pycache__/
%{pylibdir}/json/*.py
%{pylibdir}/json/__pycache__/*%{bytecode_suffixes}
%{pylibdir}/logging
%{pylibdir}/multiprocessing
%dir %{pylibdir}/sqlite3/
%dir %{pylibdir}/sqlite3/__pycache__/
%{pylibdir}/sqlite3/*.py
%{pylibdir}/sqlite3/__pycache__/*%{bytecode_suffixes}
%if %{without flatpackage}
%exclude %{pylibdir}/turtle.py
%exclude %{pylibdir}/__pycache__/turtle*%{bytecode_suffixes}
%endif
%{pylibdir}/urllib
%{pylibdir}/xml
%if "%{_lib}" == "lib64"
%attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}
%attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}/site-packages
%attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}/site-packages/__pycache__/
%endif
# "Makefile" and the config-32/64.h file are needed by
# distutils/sysconfig.py:_init_posix(), so we include them in the core
# package, along with their parent directories (bug 531901):
%dir %{pylibdir}/config-%{LDVERSION_optimized}-%{_arch}-linux%{_gnu}/
%{pylibdir}/config-%{LDVERSION_optimized}-%{_arch}-linux%{_gnu}/Makefile
%dir %{_includedir}/python%{LDVERSION_optimized}/
%{_includedir}/python%{LDVERSION_optimized}/%{_pyconfig_h}
%{_libdir}/%{py_INSTSONAME_optimized}
%if %{without flatpackage}
%{_libdir}/libpython3.so
%endif
%if %{without flatpackage}
%files devel
%{_bindir}/2to3
%endif
%{pylibdir}/config-%{LDVERSION_optimized}-%{_arch}-linux%{_gnu}/*
%if %{without flatpackage}
%exclude %{pylibdir}/config-%{LDVERSION_optimized}-%{_arch}-linux%{_gnu}/Makefile
%exclude %{_includedir}/python%{LDVERSION_optimized}/%{_pyconfig_h}
%endif
%{_includedir}/python%{LDVERSION_optimized}/*.h
%{_includedir}/python%{LDVERSION_optimized}/internal/
%{_includedir}/python%{LDVERSION_optimized}/cpython/
%doc Misc/README.valgrind Misc/valgrind-python.supp Misc/gdbinit
%if %{without flatpackage}
%{_bindir}/python3-config
%{_libdir}/pkgconfig/python3.pc
%{_bindir}/pathfix.py
%{_bindir}/pygettext3.py
%{_bindir}/msgfmt3.py
%endif
%{_bindir}/pygettext%{pybasever}.py
%{_bindir}/msgfmt%{pybasever}.py
%{_bindir}/python%{pybasever}-config
%{_bindir}/python%{LDVERSION_optimized}-config
%{_bindir}/python%{LDVERSION_optimized}-*-config
%{_libdir}/libpython%{LDVERSION_optimized}.so
%{_libdir}/pkgconfig/python-%{LDVERSION_optimized}.pc
%{_libdir}/pkgconfig/python-%{pybasever}.pc
%if %{without flatpackage}
%files idle
%{_bindir}/idle*
%else
%{_bindir}/idle%{pybasever}
%endif
%{pylibdir}/idlelib
%if %{without flatpackage}
%{_metainfodir}/idle3.appdata.xml
%{_datadir}/applications/idle3.desktop
%{_datadir}/icons/hicolor/*/apps/idle3.*
%endif
%if %{without flatpackage}
%files tkinter
%endif
%{pylibdir}/tkinter
%if %{without flatpackage}
%exclude %{pylibdir}/tkinter/test
%endif
%{dynload_dir}/_tkinter.%{SOABI_optimized}.so
%{pylibdir}/turtle.py
%{pylibdir}/__pycache__/turtle*%{bytecode_suffixes}
%dir %{pylibdir}/turtledemo
%{pylibdir}/turtledemo/*.py
%{pylibdir}/turtledemo/*.cfg
%dir %{pylibdir}/turtledemo/__pycache__/
%{pylibdir}/turtledemo/__pycache__/*%{bytecode_suffixes}
%if %{without flatpackage}
%files test
%endif
%{pylibdir}/ctypes/test
%{pylibdir}/distutils/tests
%{pylibdir}/sqlite3/test
%{pylibdir}/test
%{dynload_dir}/_ctypes_test.%{SOABI_optimized}.so
%{dynload_dir}/_testbuffer.%{SOABI_optimized}.so
%{dynload_dir}/_testcapi.%{SOABI_optimized}.so
%{dynload_dir}/_testimportmultiple.%{SOABI_optimized}.so
%{dynload_dir}/_xxtestfuzz.%{SOABI_optimized}.so
%{pylibdir}/lib2to3/tests
%{pylibdir}/tkinter/test
%{pylibdir}/unittest/test
# stuff already owned by the libs subpackage
# test requires libs, so we are safe not owning those dirs
%if %{without flatpackage}
%exclude %dir %{pylibdir}/test/
%exclude %dir %{pylibdir}/test/__pycache__/
%exclude %{pylibdir}/test/__init__.py
%exclude %{pylibdir}/test/__pycache__/__init__%{bytecode_suffixes}
%exclude %{pylibdir}/test/support/
%endif
# We don't bother splitting the debug build out into further subpackages:
# if you need it, you're probably a developer.
# Hence the manifest is the combination of analogous files in the manifests of
# all of the other subpackages
%if %{with debug_build}
%if %{without flatpackage}
%files debug
%{_bindir}/python3-debug
%endif
# Analog of the core subpackage's files:
%{_bindir}/python%{LDVERSION_debug}
# Analog of the -libs subpackage's files:
# ...with debug builds of the built-in "extension" modules:
%{dynload_dir}/_blake2.%{SOABI_debug}.so
%{dynload_dir}/_md5.%{SOABI_debug}.so
%{dynload_dir}/_sha1.%{SOABI_debug}.so
%{dynload_dir}/_sha256.%{SOABI_debug}.so
%{dynload_dir}/_sha3.%{SOABI_debug}.so
%{dynload_dir}/_sha512.%{SOABI_debug}.so
%{dynload_dir}/_asyncio.%{SOABI_debug}.so
%{dynload_dir}/_bisect.%{SOABI_debug}.so
%{dynload_dir}/_bz2.%{SOABI_debug}.so
%{dynload_dir}/_codecs_cn.%{SOABI_debug}.so
%{dynload_dir}/_codecs_hk.%{SOABI_debug}.so
%{dynload_dir}/_codecs_iso2022.%{SOABI_debug}.so
%{dynload_dir}/_codecs_jp.%{SOABI_debug}.so
%{dynload_dir}/_codecs_kr.%{SOABI_debug}.so
%{dynload_dir}/_codecs_tw.%{SOABI_debug}.so
%{dynload_dir}/_contextvars.%{SOABI_debug}.so
%{dynload_dir}/_crypt.%{SOABI_debug}.so
%{dynload_dir}/_csv.%{SOABI_debug}.so
%{dynload_dir}/_ctypes.%{SOABI_debug}.so
%{dynload_dir}/_curses.%{SOABI_debug}.so
%{dynload_dir}/_curses_panel.%{SOABI_debug}.so
%{dynload_dir}/_dbm.%{SOABI_debug}.so
%{dynload_dir}/_decimal.%{SOABI_debug}.so
%{dynload_dir}/_elementtree.%{SOABI_debug}.so
%if %{with gdbm}
%{dynload_dir}/_gdbm.%{SOABI_debug}.so
%endif
%{dynload_dir}/_hashlib.%{SOABI_debug}.so
%{dynload_dir}/_heapq.%{SOABI_debug}.so
%{dynload_dir}/_json.%{SOABI_debug}.so
%{dynload_dir}/_lsprof.%{SOABI_debug}.so
%{dynload_dir}/_lzma.%{SOABI_debug}.so
%{dynload_dir}/_multibytecodec.%{SOABI_debug}.so
%{dynload_dir}/_multiprocessing.%{SOABI_debug}.so
%{dynload_dir}/_opcode.%{SOABI_debug}.so
%{dynload_dir}/_pickle.%{SOABI_debug}.so
%{dynload_dir}/_posixsubprocess.%{SOABI_debug}.so
%{dynload_dir}/_queue.%{SOABI_debug}.so
%{dynload_dir}/_random.%{SOABI_debug}.so
%{dynload_dir}/_socket.%{SOABI_debug}.so
%{dynload_dir}/_sqlite3.%{SOABI_debug}.so
%{dynload_dir}/_ssl.%{SOABI_debug}.so
%{dynload_dir}/_struct.%{SOABI_debug}.so
%{dynload_dir}/array.%{SOABI_debug}.so
%{dynload_dir}/audioop.%{SOABI_debug}.so
%{dynload_dir}/binascii.%{SOABI_debug}.so
%{dynload_dir}/cmath.%{SOABI_debug}.so
%{dynload_dir}/_datetime.%{SOABI_debug}.so
%{dynload_dir}/fcntl.%{SOABI_debug}.so
%{dynload_dir}/grp.%{SOABI_debug}.so
%{dynload_dir}/math.%{SOABI_debug}.so
%{dynload_dir}/mmap.%{SOABI_debug}.so
%{dynload_dir}/nis.%{SOABI_debug}.so
%{dynload_dir}/ossaudiodev.%{SOABI_debug}.so
%{dynload_dir}/parser.%{SOABI_debug}.so
%{dynload_dir}/_posixshmem.%{SOABI_debug}.so
%{dynload_dir}/pyexpat.%{SOABI_debug}.so
%{dynload_dir}/readline.%{SOABI_debug}.so
%{dynload_dir}/resource.%{SOABI_debug}.so
%{dynload_dir}/select.%{SOABI_debug}.so
%{dynload_dir}/spwd.%{SOABI_debug}.so
%{dynload_dir}/syslog.%{SOABI_debug}.so
%{dynload_dir}/termios.%{SOABI_debug}.so
%{dynload_dir}/_testmultiphase.%{SOABI_debug}.so
%{dynload_dir}/unicodedata.%{SOABI_debug}.so
%{dynload_dir}/_uuid.%{SOABI_debug}.so
%{dynload_dir}/_xxsubinterpreters.%{SOABI_debug}.so
%{dynload_dir}/_xxtestfuzz.%{SOABI_debug}.so
%{dynload_dir}/zlib.%{SOABI_debug}.so
# No need to split things out the "Makefile" and the config-32/64.h file as we
# do for the regular build above (bug 531901), since they're all in one package
# now; they're listed below, under "-devel":
%{_libdir}/%{py_INSTSONAME_debug}
# Analog of the -devel subpackage's files:
%{pylibdir}/config-%{LDVERSION_debug}-%{_arch}-linux%{_gnu}
%{_includedir}/python%{LDVERSION_debug}
%{_bindir}/python%{LDVERSION_debug}-config
%{_bindir}/python%{LDVERSION_debug}-*-config
%{_libdir}/libpython%{LDVERSION_debug}.so
%{_libdir}/libpython%{LDVERSION_debug}.so.1.0
%{_libdir}/pkgconfig/python-%{LDVERSION_debug}.pc
# Analog of the -tools subpackage's files:
# None for now; we could build precanned versions that have the appropriate
# shebang if needed
# Analog of the tkinter subpackage's files:
%{dynload_dir}/_tkinter.%{SOABI_debug}.so
# Analog of the -test subpackage's files:
%{dynload_dir}/_ctypes_test.%{SOABI_debug}.so
%{dynload_dir}/_testbuffer.%{SOABI_debug}.so
%{dynload_dir}/_testcapi.%{SOABI_debug}.so
%{dynload_dir}/_testimportmultiple.%{SOABI_debug}.so
%endif # with debug_build
# We put the debug-gdb.py file inside /usr/lib/debug to avoid noise from ldconfig
# See https://bugzilla.redhat.com/show_bug.cgi?id=562980
#
# The /usr/lib/rpm/redhat/macros defines %%__debug_package to use
# debugfiles.list, and it appears that everything below /usr/lib/debug and
# (/usr/src/debug) gets added to this file (via LISTFILES) in
# /usr/lib/rpm/find-debuginfo.sh
#
# Hence by installing it below /usr/lib/debug we ensure it is added to the
# -debuginfo subpackage
# (if it doesn't, then the rpmbuild ought to fail since the debug-gdb.py
# payload file would be unpackaged)
# Workaround for https://bugzilla.redhat.com/show_bug.cgi?id=1476593
%undefine _debuginfo_subpackages
# ======================================================
# Finally, the changelog:
# ======================================================
%changelog
* Tue Mar 26 2019 Miro Hrončok <mhroncok@redhat.com> - 3.8.0~a3-1
- Update to 3.8.0a3
* Mon Feb 25 2019 Miro Hrončok <mhroncok@redhat.com> - 3.8.0~a2-1
- Update to 3.8.0a2
* Mon Feb 18 2019 Miro Hrončok <mhroncok@redhat.com> - 3.8.0~a1-3
- Reduced default build flags used to build extension modules
https://fedoraproject.org/wiki/Changes/Python_Extension_Flags
* Sun Feb 17 2019 Igor Gnatenko <ignatenkobrain@fedoraproject.org> - 3.8.0~a1-2
- Rebuild for readline 8.0
* Tue Feb 05 2019 Miro Hrončok <mhroncok@redhat.com> - 3.8.0~a1-1
- Update to 3.8.0a1