python36/python3.spec

1875 lines
68 KiB
RPMSpec
Raw Normal View History

# ======================================================
# Conditionals and other variables controlling the build
# ======================================================
%global pybasever 3.2
# pybasever without the dot:
%global pyshortver 32
2010-01-13 21:25:18 +00:00
%global pylibdir %{_libdir}/python%{pybasever}
%global dynload_dir %{pylibdir}/lib-dynload
2010-01-13 21:25:18 +00:00
# SOABI is defined in the upstream configure.in from Python-3.2a2 onwards,
# for PEP 3149:
# http://www.python.org/dev/peps/pep-3149/
# ABIFLAGS, LDVERSION and SOABI are in the upstream Makefile
%global ABIFLAGS_optimized mu
%global ABIFLAGS_debug dmu
%global LDVERSION_optimized %{pybasever}%{ABIFLAGS_optimized}
%global LDVERSION_debug %{pybasever}%{ABIFLAGS_debug}
%global SOABI_optimized cpython-%{pyshortver}%{ABIFLAGS_optimized}
%global SOABI_debug cpython-%{pyshortver}%{ABIFLAGS_debug}
# All bytecode files are now in a __pycache__ subdirectory, with a name
# reflecting the version of the bytecode (to permit sharing of python libraries
# between different runtimes)
# See http://www.python.org/dev/peps/pep-3147/
# For example,
# foo/bar.py
# now has bytecode at:
# foo/__pycache__/bar.cpython-32.pyc
# foo/__pycache__/bar.cpython-32.pyo
%global bytecode_suffixes .cpython-32.py?
# Python's configure script defines SOVERSION, and this is used in the Makefile
# to determine INSTSONAME, the name of the libpython DSO:
# LDLIBRARY='libpython$(VERSION).so'
# INSTSONAME="$LDLIBRARY".$SOVERSION
# We mirror this here in order to make it easier to add the -gdb.py hooks.
# (if these get out of sync, the payload of the libs subpackage will fail
# and halt the build)
%global py_SOVERSION 1.0
%global py_INSTSONAME_optimized libpython%{LDVERSION_optimized}.so.%{py_SOVERSION}
%global py_INSTSONAME_debug libpython%{LDVERSION_debug}.so.%{py_SOVERSION}
2010-08-21 20:26:53 +00:00
%global with_debug_build 1
%global with_gdb_hooks 1
%global with_systemtap 1
# some arches don't have valgrind so we need to disable its support on them
%ifarch %{ix86} x86_64 ppc ppc64 s390x
%global with_valgrind 1
%else
%global with_valgrind 0
%endif
%global with_gdbm 1
# Change from yes to no to turn this off
%global with_computed_gotos yes
# Turn this to 0 to turn off the "check" phase:
%global run_selftest_suite 1
2010-01-13 21:25:18 +00:00
# We want to byte-compile the .py files within the packages using the new
# python3 binary.
#
# Unfortunately, rpmbuild's infrastructure requires us to jump through some
# hoops to avoid byte-compiling with the system python 2 version:
# /usr/lib/rpm/redhat/macros sets up build policy that (amongst other things)
# defines __os_install_post. In particular, "brp-python-bytecompile" is
# invoked without an argument thus using the wrong version of python
# (/usr/bin/python, rather than the freshly built python), thus leading to
# numerous syntax errors, and incorrect magic numbers in the .pyc files. We
# thus override __os_install_post to avoid invoking this script:
%global __os_install_post /usr/lib/rpm/redhat/brp-compress \
%{!?__debug_package:/usr/lib/rpm/redhat/brp-strip %{__strip}} \
/usr/lib/rpm/redhat/brp-strip-static-archive %{__strip} \
/usr/lib/rpm/redhat/brp-strip-comment-note %{__strip} %{__objdump} \
/usr/lib/rpm/redhat/brp-python-hardlink
# to remove the invocation of brp-python-bytecompile, whilst keeping the
# invocation of brp-python-hardlink (since this should still work for python3
# pyc/pyo files)
# We need to get a newer configure generated out of configure.in for the following
# patches:
# patch 55 (systemtap)
# patch 113 (more config flags)
#
# For patch 55 (systemtap), we need to get a new header for configure to use
#
# configure.in requires autoconf-2.65, but the version in Fedora is currently
# autoconf-2.66
#
# For now, we'll generate a patch to the generated configure script and
# pyconfig.h.in on a machine that has a local copy of autoconf 2.65
#
# Instructions on obtaining such a copy can be seen at
# http://bugs.python.org/issue7997
#
# To make it easy to regenerate the patch, this specfile can be run in two
# ways:
# (i) regenerate_autotooling_patch 0 : the normal approach: prep the
# source tree using a pre-generated patch to the "configure" script, and do a
# full build
# (ii) regenerate_autotooling_patch 1 : intended to be run on a developer's
# workstation: prep the source tree without patching configure, then rerun a
# local copy of autoconf-2.65, regenerate the patch, then exit, without doing
# the rest of the build
%global regenerate_autotooling_patch 0
# ==================
# Top-level metadata
# ==================
2010-01-13 21:25:18 +00:00
Summary: Version 3 of the Python programming language aka Python 3000
Name: python3
Version: %{pybasever}.3
Release: 5%{?dist}
2010-01-13 21:25:18 +00:00
License: Python
Group: Development/Languages
# =======================
# Build-time requirements
# =======================
# (keep this list alphabetized)
BuildRequires: autoconf
BuildRequires: bzip2
BuildRequires: bzip2-devel
BuildRequires: db4-devel >= 4.7
# expat 2.1.0 added the symbol XML_SetHashSalt without bumping SONAME. We use
# it (in pyexpat) in order to enable the fix in Python-3.2.3 for CVE-2012-0876:
BuildRequires: expat-devel >= 2.1.0
BuildRequires: findutils
BuildRequires: gcc-c++
%if %{with_gdbm}
BuildRequires: gdbm-devel
%endif
BuildRequires: glibc-devel
BuildRequires: gmp-devel
BuildRequires: libffi-devel
BuildRequires: libGL-devel
BuildRequires: libX11-devel
BuildRequires: ncurses-devel
BuildRequires: openssl-devel
BuildRequires: pkgconfig
BuildRequires: readline-devel
BuildRequires: sqlite-devel
%if 0%{?with_systemtap}
BuildRequires: systemtap-sdt-devel
# (this introduces a dependency on "python", in that systemtap-sdt-devel's
# /usr/bin/dtrace is a python 2 script)
%global tapsetdir /usr/share/systemtap/tapset
%endif # with_systemtap
BuildRequires: tar
BuildRequires: tcl-devel
BuildRequires: tix-devel
BuildRequires: tk-devel
%if 0%{?with_valgrind}
BuildRequires: valgrind-devel
%endif
BuildRequires: zlib-devel
# =======================
# Source code and patches
# =======================
Source: http://www.python.org/ftp/python/%{version}/Python-%{version}.tar.xz
2010-01-13 21:25:18 +00:00
# Avoid having various bogus auto-generated Provides lines for the various
# python c modules' SONAMEs:
Source1: find-provides-without-python-sonames.sh
%global _use_internal_dependency_generator 0
%global __find_provides %{SOURCE1}
# Supply various useful macros for building python 3 modules:
# __python3, python3_sitelib, python3_sitearch
Source2: macros.python3
# Supply an RPM macro "py_byte_compile" for the python3-devel subpackage
# to enable specfiles to selectively byte-compile individual files and paths
# with different Python runtimes as necessary:
Source3: macros.pybytecompile
# Systemtap tapset to make it easier to use the systemtap static probes
# (actually a template; LIBRARY_PATH will get fixed up during install)
# Written by dmalcolm; not yet sent upstream
Source5: libpython.stp
# Example systemtap script using the tapset
# Written by wcohen, mjw, dmalcolm; not yet sent upstream
Source6: systemtap-example.stp
# Another example systemtap script that uses the tapset
# Written by dmalcolm; not yet sent upstream
Source7: pyfuntop.stp
2010-01-13 21:25:18 +00:00
# Fixup distutils/unixccompiler.py to remove standard library path from rpath:
# Was Patch0 in ivazquez' python3000 specfile:
Patch1: Python-3.1.1-rpath.patch
# The four TestMIMEAudio tests fail due to "audiotest.au" not being packaged.
# It's simplest to remove them:
Patch3: python-3.2b2-remove-mimeaudio-tests.patch
2010-01-13 21:25:18 +00:00
# Systemtap support: add statically-defined probe points
# Patch based on upstream bug: http://bugs.python.org/issue4111
# fixed up by mjw and wcohen for 2.6.2, then fixed up by dmalcolm for 2.6.4
# then rewritten by mjw (attachment 390110 of rhbz 545179); ported to 3.1.1 by
# dmalcolm
Patch55: 00055-systemtap.patch
Patch102: python-3.2.3-lib64.patch
2010-01-13 21:25:18 +00:00
# Only used when "%{_lib}" == "lib64"
# Another lib64 fix, for distutils/tests/test_install.py; not upstream:
Patch104: 00104-lib64-fix-for-test_install.patch
# Patch the Makefile.pre.in so that the generated Makefile doesn't try to build
# a libpythonMAJOR.MINOR.a (bug 550692):
Patch111: 00111-no-static-lib.patch
# Patch112: python-2.7rc1-debug-build.patch: this is not relevant to Python 3,
# for 3.2 onwards
# Add configure-time support for the COUNT_ALLOCS and CALL_PROFILE options
# described at http://svn.python.org/projects/python/trunk/Misc/SpecialBuilds.txt
# so that if they are enabled, they will be in that build's pyconfig.h, so that
# extension modules will reliably use them
Patch113: 00113-more-configuration-flags.patch
# Add flags for statvfs.f_flag to the constant list in posixmodule (i.e. "os")
# (rhbz:553020); partially upstream as http://bugs.python.org/issue7647
Patch114: 00114-statvfs-f_flag-constants.patch
# COUNT_ALLOCS is useful for debugging, but the upstream behaviour of always
# emitting debug info to stdout on exit is too verbose and makes it harder to
# use the debug build. Add a "PYTHONDUMPCOUNTS" environment variable which
# must be set to enable the output on exit
# Not yet sent upstream:
Patch125: 00125-less-verbose-COUNT_ALLOCS.patch
# In my koji builds, /root/bin is in the PATH for some reason
# This leads to test_subprocess.py failing, due to "test_leaking_fds_on_error"
# trying every dir in PATH for "nonexisting_i_hope", which leads to it raising
# OSError: [Errno 13] Permission denied
# when it tries to read /root/bin, rather than raising "No such file"
#
# Work around this by specifying an absolute path for the non-existant
# executable
# Not yet sent upstream
Patch129: python-3.2.1-fix-test-subprocess-with-nonreadable-path-dir.patch
# Python 2's:
# Patch130: python-2.7.2-add-extension-suffix-to-python-config.patch
# is not relevant to Python 3 (for 3.2 onwards)
# The four tests in test_io built on top of check_interrupted_write_retry
# fail when built in Koji, for ppc and ppc64; for some reason, the SIGALRM
# handlers are never called, and the call to write runs to completion
# (rhbz#732998)
Patch131: 00131-disable-tests-in-test_io.patch
# Add non-standard hooks to unittest for use in the "check" phase below, when
# running selftests within the build:
# @unittest._skipInRpmBuild(reason)
# for tests that hang or fail intermittently within the build environment, and:
# @unittest._expectedFailureInRpmBuild
# for tests that always fail within the build environment
#
# The hooks only take effect if WITHIN_PYTHON_RPM_BUILD is set in the
# environment, which we set manually in the appropriate portion of the "check"
# phase below (and which potentially other python-* rpms could set, to reuse
# these unittest hooks in their own "check" phases)
Patch132: 00132-add-rpmbuild-hooks-to-unittest.patch
# 00133-skip-test_dl.patch is not relevant for python3: the "dl" module no
# longer exists
# Fix a failure in test_sys.py when configured with COUNT_ALLOCS enabled
# Not yet sent upstream
Patch134: 00134-fix-COUNT_ALLOCS-failure-in-test_sys.patch
# test_weakref's test_callback_in_cycle_resurrection doesn't work with
# COUNT_ALLOCS, as the metrics keep "C" alive. Work around this for our
# debug build:
# Not yet sent upstream
Patch135: 00135-fix-test-within-test_weakref-in-debug-build.patch
# Patch136: 00136-skip-tests-of-seeking-stdin-in-rpmbuild.patch does not seem
# to be needed by python3
# Some tests within distutils fail when run in an rpmbuild:
Patch137: 00137-skip-distutils-tests-that-fail-in-rpmbuild.patch
# Patch138: 00138-fix-distutils-tests-in-debug-build.patch is not relevant for
# python3
# ARM-specific: skip known failure in test_float:
# http://bugs.python.org/issue8265 (rhbz#706253)
Patch139: 00139-skip-test_float-known-failure-on-arm.patch
# Patch140: 00140-skip-test_ctypes-known-failure-on-sparc.patch does not appear
# to be relevant for python3
# Fix test_gc's test_newinstance case when configured with COUNT_ALLOCS:
Patch141: 00141-fix-test_gc_with_COUNT_ALLOCS.patch
# Some pty tests fail when run in mock (rhbz#714627):
Patch142: 00142-skip-failing-pty-tests-in-rpmbuild.patch
# Fix the --with-tsc option on ppc64, and rework it on 32-bit ppc to avoid
# aliasing violations (rhbz#698726)
# Sent upstream as http://bugs.python.org/issue12872
Patch143: 00143-tsc-on-ppc.patch
# (Optionally) disable the gdbm module:
# python.spec's
# Patch144: 00144-no-gdbm.patch
# is not needed in python3.spec
2011-09-14 04:10:15 +00:00
# python.spec's
# Patch145: 00145-force-sys-platform-to-be-linux2.patch
# is upstream for Python 3 as of 3.2.2
# Support OpenSSL FIPS mode (e.g. when OPENSSL_FORCE_FIPS_MODE=1 is set)
# - handle failures from OpenSSL (e.g. on attempts to use MD5 in a
# FIPS-enforcing environment)
# - add a new "usedforsecurity" keyword argument to the various digest
# algorithms in hashlib so that you can whitelist a callsite with
# "usedforsecurity=False"
# (sent upstream for python 3 as http://bugs.python.org/issue9216 ; see RHEL6
# python patch 119)
# - enforce usage of the _hashlib implementation: don't fall back to the _md5
# and _sha* modules (leading to clearer error messages if fips selftests
# fail)
# - don't build the _md5 and _sha* modules; rely on the _hashlib implementation
# of hashlib
# (rhbz#563986)
Patch146: 00146-hashlib-fips.patch
# Add a sys._debugmallocstats() function
# Based on patch 202 from RHEL 5's python.spec, with updates from rhbz#737198
# Not yet sent upstream
Patch147: 00147-add-debug-malloc-stats.patch
# Upstream as of Python 3.2.3:
# Patch148: 00148-gdbm-1.9-magic-values.patch
# Upstream as of Python 3.2.3:
# Patch149: 00149-backport-issue11254-pycache-bytecompilation-fix.patch
# temporarily disable rAssertAlmostEqual in test_cmath on PPC (bz #750811)
# caused by a glibc bug. This patch can be removed when we have a glibc with
# the patch mentioned here:
# http://sourceware.org/bugzilla/show_bug.cgi?id=13472
Patch150: 00150-disable-rAssertAlmostEqual-cmath-on-ppc.patch
# python.spec had:
# Patch151: 00151-fork-deadlock.patch
# Fix a regex in test_gdb so that it doesn't choke when gdb provides a full
# path to Python/bltinmodule.c:
Patch152: 00152-fix-test-gdb-regex.patch
# Strip out lines of the form "warning: Unable to open ..." from gdb's stderr
# when running test_gdb.py; also cope with change to gdb in F17 onwards in
# which values are printed as "v@entry" rather than just "v":
Patch153: 00153-fix-test_gdb-noise.patch
# python3.spec on f15 has:
# Patch154: 00154-skip-urllib-test-requiring-working-DNS.patch
# Avoid allocating thunks in ctypes unless absolutely necessary, to avoid
# generating SELinux denials on "import ctypes" and "import uuid" when
# embedding Python within httpd (rhbz#814391)
Patch155: 00155-avoid-ctypes-thunks.patch
# Recent builds of gdb will only auto-load scripts from certain safe
# locations. Turn off this protection when running test_gdb in the selftest
# suite to ensure that it can load our -gdb.py script (rhbz#817072):
Patch156: 00156-gdb-autoload-safepath.patch
# (New patches go here ^^^)
#
# When adding new patches to "python" and "python3" in Fedora 17 onwards,
# please try to keep the patch numbers in-sync between the two specfiles:
#
# - use the same patch number across both specfiles for conceptually-equivalent
# fixes, ideally with the same name
#
# - when a patch is relevant to both specfiles, use the same introductory
# comment in both specfiles where possible (to improve "diff" output when
# comparing them)
#
# - when a patch is only relevant for one of the two specfiles, leave a gap
# in the patch numbering in the other specfile, adding a comment when
# omitting a patch, both in the manifest section here, and in the "prep"
# phase below
#
# Hopefully this will make it easier to ensure that all relevant fixes are
# applied to both versions.
# This is the generated patch to "configure"; see the description of
# %{regenerate_autotooling_patch}
# above:
Patch300: autotool-intermediates.patch
2010-01-13 21:25:18 +00:00
BuildRoot: %{_tmppath}/%{name}-%{version}-root
# ======================================================
# Additional metadata, and subpackages
# ======================================================
2010-01-13 21:25:18 +00:00
URL: http://www.python.org/
# See notes in bug 532118:
Provides: python(abi) = %{pybasever}
Requires: %{name}-libs%{?_isa} = %{version}-%{release}
2010-01-13 21:25:18 +00:00
%description
Python 3 is a new version of the language that is incompatible with the 2.x
line of releases. The language is mostly the same, but many details, especially
how built-in objects like dictionaries and strings work, have changed
considerably, and a lot of deprecated features have finally been removed.
%package libs
Summary: Python 3 runtime libraries
Group: Development/Libraries
#Requires: %{name} = %{version}-%{release}
# expat 2.1.0 added the symbol XML_SetHashSalt without bumping SONAME. We use
# this symbol (in pyexpat), so we must explicitly state this dependency to
# prevent "import pyexpat" from failing with a linker error if someone hasn't
# yet upgraded expat:
Requires: expat >= 2.1.0
2010-01-13 21:25:18 +00:00
%description libs
This package contains files used to embed Python 3 into applications.
%package devel
Summary: Libraries and header files needed for Python 3 development
Group: Development/Libraries
Requires: %{name}%{?_isa} = %{version}-%{release}
2010-01-13 21:25:18 +00:00
Conflicts: %{name} < %{version}-%{release}
%description devel
This package contains libraries and header files used to build applications
with and native libraries for Python 3
%package tools
Summary: A collection of tools included with Python 3
Group: Development/Tools
Requires: %{name} = %{version}-%{release}
Requires: %{name}-tkinter = %{version}-%{release}
%description tools
This package contains several tools included with Python 3
%package tkinter
Summary: A GUI toolkit for Python 3
Group: Development/Languages
Requires: %{name} = %{version}-%{release}
%description tkinter
The Tkinter (Tk interface) program is an graphical user interface for
the Python scripting language.
%package test
Summary: The test modules from the main python 3 package
Group: Development/Languages
Requires: %{name} = %{version}-%{release}
Requires: %{name}-tools = %{version}-%{release}
%description test
The test modules from the main %{name} package.
These are in a separate package to save space, as they are almost never used
in production.
You might want to install the python3-test package if you're developing
python 3 code that uses more than just unittest and/or test_support.py.
2010-08-21 20:26:53 +00:00
%if 0%{?with_debug_build}
%package debug
Summary: Debug version of the Python 3 runtime
Group: Applications/System
# The debug build is an all-in-one package version of the regular build, and
# shares the same .py/.pyc files and directories as the regular build. Hence
# we depend on all of the subpackages of the regular build:
Requires: %{name}%{?_isa} = %{version}-%{release}
Requires: %{name}-libs%{?_isa} = %{version}-%{release}
Requires: %{name}-devel%{?_isa} = %{version}-%{release}
Requires: %{name}-test%{?_isa} = %{version}-%{release}
Requires: %{name}-tkinter%{?_isa} = %{version}-%{release}
Requires: %{name}-tools%{?_isa} = %{version}-%{release}
%description debug
python3-debug provides a version of the Python 3 runtime with numerous debugging
features enabled, aimed at advanced Python users, such as developers of Python
extension modules.
This version uses more memory and will be slower than the regular Python 3 build,
but is useful for tracking down reference-counting issues, and other bugs.
The bytecodes are unchanged, so that .pyc files are compatible between the two
versions of Python 3, but the debugging features mean that C/C++ extension
modules are ABI-incompatible with those built for the standard runtime.
It shares installation directories with the standard Python 3 runtime, so that
.py and .pyc files can be shared. All compiled extension modules gain a "_d"
suffix ("foo_d.so" rather than "foo.so") so that each Python 3 implementation
can load its own extensions.
%endif # with_debug_build
# ======================================================
# The prep phase of the build:
# ======================================================
2010-01-13 21:25:18 +00:00
%prep
2011-02-21 16:28:42 +00:00
%setup -q -n Python-%{version}
2010-01-13 21:25:18 +00:00
chmod +x %{SOURCE1}
%if 0%{?with_systemtap}
# Provide an example of usage of the tapset:
cp -a %{SOURCE6} .
cp -a %{SOURCE7} .
%endif # with_systemtap
# Ensure that we're using the system copy of various libraries, rather than
# copies shipped by upstream in the tarball:
# Remove embedded copy of expat:
rm -r Modules/expat || exit 1
# Remove embedded copy of libffi:
for SUBDIR in darwin libffi libffi_arm_wince libffi_msvc libffi_osx ; do
rm -r Modules/_ctypes/$SUBDIR || exit 1 ;
done
# Remove embedded copy of zlib:
rm -r Modules/zlib || exit 1
# Don't build upstream Python's implementation of these crypto algorithms;
# instead rely on _hashlib and OpenSSL.
#
# For example, in our builds hashlib.md5 is implemented within _hashlib via
# OpenSSL (and thus respects FIPS mode), and does not fall back to _md5
for f in md5module.c sha1module.c sha256module.c sha512module.c; do
rm Modules/$f
done
#
# Apply patches:
#
%patch1 -p1
2010-01-13 21:25:18 +00:00
%patch3 -p1 -b .remove-mimeaudio-tests
%if 0%{?with_systemtap}
%patch55 -p1 -b .systemtap
%endif
2010-01-13 21:25:18 +00:00
%if "%{_lib}" == "lib64"
%patch102 -p1
%patch104 -p1
2010-01-13 21:25:18 +00:00
%endif
%patch111 -p1
# 112: not for python3
%patch113 -p1
%patch114 -p1
%patch125 -p1 -b .less-verbose-COUNT_ALLOCS
%patch129 -p1
%ifarch ppc ppc64
%patch131 -p1
%endif
%patch132 -p1
# 00133: not for python3
%patch134 -p1
%patch135 -p1
# 00136: not for python3
%patch137 -p1
# 00138: not for python3
%ifarch %{arm}
%patch139 -p1
%endif
# 00140: not for python3
%patch141 -p1
%patch142 -p1
%patch143 -p1 -b .tsc-on-ppc
# 00144: not for python3
2011-09-14 04:10:15 +00:00
# 00145: not for python3
%patch146 -p1
%patch147 -p1
# 00148: upstream as of Python 3.2.3
# 00149: upstream as of Python 3.2.3
%ifarch ppc ppc64
%patch150 -p1
%endif
# 00151: not for python3
%patch152 -p0
%patch153 -p0
# 00154: not for this branch
%patch155 -p1
%patch156 -p1
# Currently (2010-01-15), http://docs.python.org/library is for 2.6, and there
# are many differences between 2.6 and the Python 3 library.
#
# Fix up the URLs within pydoc to point at the documentation for this
# MAJOR.MINOR version:
#
sed --in-place \
--expression="s|http://docs.python.org/library|http://docs.python.org/%{pybasever}/library|g" \
Lib/pydoc.py || exit 1
2010-01-13 21:25:18 +00:00
%if ! 0%{regenerate_autotooling_patch}
# Normally we apply the patch to "configure"
# We don't apply the patch if we're working towards regenerating it
%patch300 -p0 -b .autotool-intermediates
%endif
# ======================================================
# Configuring and building the code:
# ======================================================
2010-01-13 21:25:18 +00:00
%build
topdir=$(pwd)
export CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv"
export CXXFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv"
2010-01-13 21:25:18 +00:00
export CPPFLAGS="`pkg-config --cflags-only-I libffi`"
export OPT="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv"
2010-01-13 21:25:18 +00:00
export LINKCC="gcc"
export CFLAGS="$CFLAGS `pkg-config --cflags openssl`"
export LDFLAGS="$RPM_LD_FLAGS `pkg-config --libs-only-L openssl`"
2010-01-13 21:25:18 +00:00
%if 0%{regenerate_autotooling_patch}
# If enabled, this code regenerates the patch to "configure", using a
# local copy of autoconf-2.65, then exits the build
#
# The following assumes that the copy is installed to ~/autoconf-2.65/bin
# as per these instructions:
# http://bugs.python.org/issue7997
for f in pyconfig.h.in configure ; do
cp $f $f.autotool-intermediates ;
done
# Rerun the autotools:
PATH=~/autoconf-2.65/bin:$PATH autoreconf
# Regenerate the patch:
gendiff . .autotool-intermediates > %{PATCH300}
# Exit the build
exit 1
%endif
# Define a function, for how to perform a "build" of python for a given
# configuration:
BuildPython() {
ConfName=$1
BinaryName=$2
SymlinkName=$3
ExtraConfigArgs=$4
PathFixWithThisBinary=$5
ConfDir=build/$ConfName
echo STARTING: BUILD OF PYTHON FOR CONFIGURATION: $ConfName - %{_bindir}/$BinaryName
mkdir -p $ConfDir
pushd $ConfDir
# Use the freshly created "configure" script, but in the directory two above:
%global _configure $topdir/configure
%configure \
--enable-ipv6 \
--with-wide-unicode \
--enable-shared \
%if 0%{?with_systemtap}
--with-dtrace \
--with-tapset-install-dir=%{tapsetdir} \
%endif
--with-system-ffi \
%if 0%{?with_valgrind}
--with-valgrind \
%endif
--with-system-expat \
--with-dbmliborder=gdbm:ndbm:bdb \
$ExtraConfigArgs \
--with-computed-gotos=%{with_computed_gotos} \
%{nil}
# Set EXTRA_CFLAGS to our CFLAGS (rather than overriding OPT, as we've done
# in the past).
# This should fix a problem with --with-valgrind where it adds
# -DDYNAMIC_ANNOTATIONS_ENABLED=1
# to OPT which must be passed to all compilation units in the build,
# otherwise leading to linker errors, e.g.
# missing symbol AnnotateRWLockDestroy
#
# Invoke the build:
make EXTRA_CFLAGS="$CFLAGS" %{?_smp_mflags}
2010-01-13 21:25:18 +00:00
popd
echo FINISHED: BUILD OF PYTHON FOR CONFIGURATION: $ConfDir
}
# Use "BuildPython" to support building with different configurations:
2010-08-21 20:26:53 +00:00
%if 0%{?with_debug_build}
BuildPython debug \
python-debug \
python%{pybasever}-debug \
%ifarch %{ix86} x86_64 ppc ppc64
"--with-pydebug --with-tsc --with-count-allocs --with-call-profile" \
%else
"--with-pydebug --with-count-allocs --with-call-profile" \
%endif
false
2010-08-21 20:26:53 +00:00
%endif # with_debug_build
BuildPython optimized \
python \
python%{pybasever} \
"" \
true
# ======================================================
# Installing the built code:
# ======================================================
2010-01-13 21:25:18 +00:00
%install
topdir=$(pwd)
rm -fr %{buildroot}
mkdir -p %{buildroot}%{_prefix} %{buildroot}%{_mandir}
2010-01-13 21:25:18 +00:00
InstallPython() {
ConfName=$1
PyInstSoName=$2
ConfDir=build/$ConfName
echo STARTING: INSTALL OF PYTHON FOR CONFIGURATION: $ConfName
mkdir -p $ConfDir
pushd $ConfDir
make install DESTDIR=%{buildroot} INSTALL="install -p"
2010-01-13 21:25:18 +00:00
popd
# We install a collection of hooks for gdb that make it easier to debug
# executables linked against libpython3* (such as /usr/bin/python3 itself)
#
# These hooks are implemented in Python itself (though they are for the version
# of python that gdb is linked with, in this case Python 2.7)
#
# gdb-archer looks for them in the same path as the ELF file, with a -gdb.py suffix.
# We put them in the debuginfo package by installing them to e.g.:
# /usr/lib/debug/usr/lib/libpython3.2.so.1.0.debug-gdb.py
#
# See https://fedoraproject.org/wiki/Features/EasierPythonDebugging for more
# information
#
# Copy up the gdb hooks into place; the python file will be autoloaded by gdb
# when visiting libpython.so, provided that the python file is installed to the
# same path as the library (or its .debug file) plus a "-gdb.py" suffix, e.g:
# /usr/lib/debug/usr/lib64/libpython3.2.so.1.0.debug-gdb.py
# (note that the debug path is /usr/lib/debug for both 32/64 bit)
#
# Initially I tried:
# /usr/lib/libpython3.1.so.1.0-gdb.py
# but doing so generated noise when ldconfig was rerun (rhbz:562980)
#
%if 0%{?with_gdb_hooks}
DirHoldingGdbPy=%{_prefix}/lib/debug/%{_libdir}
PathOfGdbPy=$DirHoldingGdbPy/$PyInstSoName.debug-gdb.py
mkdir -p %{buildroot}$DirHoldingGdbPy
cp Tools/gdb/libpython.py %{buildroot}$PathOfGdbPy
%endif # with_gdb_hooks
echo FINISHED: INSTALL OF PYTHON FOR CONFIGURATION: $ConfName
}
# Use "InstallPython" to support building with different configurations:
# Install the "debug" build first, so that we can move some files aside
2010-08-21 20:26:53 +00:00
%if 0%{?with_debug_build}
InstallPython debug \
%{py_INSTSONAME_debug}
2010-08-21 20:26:53 +00:00
%endif # with_debug_build
# Now the optimized build:
InstallPython optimized \
%{py_INSTSONAME_optimized}
install -d -m 0755 ${RPM_BUILD_ROOT}%{pylibdir}/site-packages/__pycache__
2010-01-13 21:25:18 +00:00
mv ${RPM_BUILD_ROOT}%{_bindir}/2to3 ${RPM_BUILD_ROOT}%{_bindir}/python3-2to3
2010-01-13 21:25:18 +00:00
# Development tools
install -m755 -d ${RPM_BUILD_ROOT}%{pylibdir}/Tools
install Tools/README ${RPM_BUILD_ROOT}%{pylibdir}/Tools/
cp -ar Tools/freeze ${RPM_BUILD_ROOT}%{pylibdir}/Tools/
cp -ar Tools/i18n ${RPM_BUILD_ROOT}%{pylibdir}/Tools/
cp -ar Tools/pynche ${RPM_BUILD_ROOT}%{pylibdir}/Tools/
cp -ar Tools/scripts ${RPM_BUILD_ROOT}%{pylibdir}/Tools/
# Documentation tools
install -m755 -d %{buildroot}%{pylibdir}/Doc
cp -ar Doc/tools %{buildroot}%{pylibdir}/Doc/
2010-01-13 21:25:18 +00:00
# Demo scripts
cp -ar Tools/demo %{buildroot}%{pylibdir}/Tools/
2010-01-13 21:25:18 +00:00
# Fix for bug #136654
rm -f %{buildroot}%{pylibdir}/email/test/data/audiotest.au %{buildroot}%{pylibdir}/test/audiotest.au
2010-01-13 21:25:18 +00:00
%if "%{_lib}" == "lib64"
install -d -m 0755 %{buildroot}/usr/lib/python%{pybasever}/site-packages/__pycache__
2010-01-13 21:25:18 +00:00
%endif
# Make python3-devel multilib-ready (bug #192747, #139911)
%global _pyconfig32_h pyconfig-32.h
%global _pyconfig64_h pyconfig-64.h
%ifarch ppc64 s390x x86_64 ia64 alpha sparc64
%global _pyconfig_h %{_pyconfig64_h}
%else
%global _pyconfig_h %{_pyconfig32_h}
%endif
2010-08-21 20:26:53 +00:00
# ABIFLAGS, LDVERSION and SOABI are in the upstream Makefile
%global ABIFLAGS_optimized mu
%global ABIFLAGS_debug dmu
%global LDVERSION_optimized %{pybasever}%{ABIFLAGS_optimized}
%global LDVERSION_debug %{pybasever}%{ABIFLAGS_debug}
%global SOABI_optimized cpython-%{pyshortver}%{ABIFLAGS_optimized}
%global SOABI_debug cpython-%{pyshortver}%{ABIFLAGS_debug}
2010-08-21 20:26:53 +00:00
%if 0%{?with_debug_build}
%global PyIncludeDirs python%{LDVERSION_optimized} python%{LDVERSION_debug}
2010-08-21 20:26:53 +00:00
%else
%global PyIncludeDirs python%{LDVERSION_optimized}
2010-08-21 20:26:53 +00:00
%endif
for PyIncludeDir in %{PyIncludeDirs} ; do
mv %{buildroot}%{_includedir}/$PyIncludeDir/pyconfig.h \
%{buildroot}%{_includedir}/$PyIncludeDir/%{_pyconfig_h}
cat > %{buildroot}%{_includedir}/$PyIncludeDir/pyconfig.h << EOF
2010-01-13 21:25:18 +00:00
#include <bits/wordsize.h>
#if __WORDSIZE == 32
#include "%{_pyconfig32_h}"
#elif __WORDSIZE == 64
#include "%{_pyconfig64_h}"
#else
#error "Unknown word size"
#endif
EOF
done
2010-01-13 21:25:18 +00:00
# Fix for bug 201434: make sure distutils looks at the right pyconfig.h file
# Similar for sysconfig: sysconfig.get_config_h_filename tries to locate
# pyconfig.h so it can be parsed, and needs to do this at runtime in site.py
# when python starts up (bug 653058)
#
# Split this out so it goes directly to the pyconfig-32.h/pyconfig-64.h
# variants:
sed -i -e "s/'pyconfig.h'/'%{_pyconfig_h}'/" \
%{buildroot}%{pylibdir}/distutils/sysconfig.py \
%{buildroot}%{pylibdir}/sysconfig.py
2010-01-13 21:25:18 +00:00
# Switch all shebangs to refer to the specific Python version.
LD_LIBRARY_PATH=./build/optimized ./build/optimized/python \
Tools/scripts/pathfix.py \
-i "%{_bindir}/python%{pybasever}" \
%{buildroot}
2010-01-13 21:25:18 +00:00
# Remove shebang lines from .py files that aren't executable, and
# remove executability from .py files that don't have a shebang line:
find %{buildroot} -name \*.py \
2010-01-13 21:25:18 +00:00
\( \( \! -perm /u+x,g+x,o+x -exec sed -e '/^#!/Q 0' -e 'Q 1' {} \; \
-print -exec sed -i '1d' {} \; \) -o \( \
-perm /u+x,g+x,o+x ! -exec grep -m 1 -q '^#!' {} \; \
-exec chmod a-x {} \; \) \)
# .xpm and .xbm files should not be executable:
find %{buildroot} \
2010-01-13 21:25:18 +00:00
\( -name \*.xbm -o -name \*.xpm -o -name \*.xpm.1 \) \
-exec chmod a-x {} \;
# Remove executable flag from files that shouldn't have it:
chmod a-x \
%{buildroot}%{pylibdir}/distutils/tests/Setup.sample \
%{buildroot}%{pylibdir}/Tools/README
2010-01-13 21:25:18 +00:00
# Get rid of DOS batch files:
find %{buildroot} -name \*.bat -exec rm {} \;
2010-01-13 21:25:18 +00:00
# Get rid of backup files:
find %{buildroot}/ -name "*~" -exec rm -f {} \;
2010-01-13 21:25:18 +00:00
find . -name "*~" -exec rm -f {} \;
rm -f %{buildroot}%{pylibdir}/LICENSE.txt
2010-01-13 21:25:18 +00:00
# Junk, no point in putting in -test sub-pkg
rm -f ${RPM_BUILD_ROOT}/%{pylibdir}/idlelib/testcode.py*
# Get rid of stray patch file from buildroot:
rm -f %{buildroot}%{pylibdir}/test/test_imp.py.apply-our-changes-to-expected-shebang # from patch 4
2010-01-13 21:25:18 +00:00
# Fix end-of-line encodings:
find %{buildroot}/ -name \*.py -exec sed -i 's/\r//' {} \;
2010-01-13 21:25:18 +00:00
# Fix an encoding:
iconv -f iso8859-1 -t utf-8 %{buildroot}/%{pylibdir}/Demo/rpc/README > README.conv && mv -f README.conv %{buildroot}/%{pylibdir}/Demo/rpc/README
2010-01-13 21:25:18 +00:00
# Note that
# %{pylibdir}/Demo/distutils/test2to3/setup.py
# is in iso-8859-1 encoding, and that this is deliberate; this is test data
# for the 2to3 tool, and one of the functions of the 2to3 tool is to fixup
# character encodings within python source code
# Do bytecompilation with the newly installed interpreter.
# This is similar to the script in macros.pybytecompile
# compile *.pyo
find %{buildroot} -type f -a -name "*.py" -print0 | \
LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \
PYTHONPATH="%{buildroot}%{_libdir}python%{pybasever} %{buildroot}/%{_libdir}python%{pybasever}/site-packages" \
xargs -0 %{buildroot}%{_bindir}/python%{pybasever} -O -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("%{buildroot}")[2]) for f in sys.argv[1:]]' || :
# compile *.pyc
find %{buildroot} -type f -a -name "*.py" -print0 | \
LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \
PYTHONPATH="%{buildroot}%{_libdir}python%{pybasever} %{buildroot}/%{_libdir}python%{pybasever}/site-packages" \
xargs -0 %{buildroot}%{_bindir}/python%{pybasever} -O -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("%{buildroot}")[2], optimize=0) for f in sys.argv[1:]]' || :
2010-01-13 21:25:18 +00:00
# Fixup permissions for shared libraries from non-standard 555 to standard 755:
find %{buildroot} \
2010-01-13 21:25:18 +00:00
-perm 555 -exec chmod 755 {} \;
# Install macros for rpm:
mkdir -p %{buildroot}/%{_sysconfdir}/rpm
install -m 644 %{SOURCE2} %{buildroot}/%{_sysconfdir}/rpm
install -m 644 %{SOURCE3} %{buildroot}/%{_sysconfdir}/rpm
2010-01-13 21:25:18 +00:00
# Ensure that the curses module was linked against libncursesw.so, rather than
# libncurses.so (bug 539917)
ldd %{buildroot}/%{dynload_dir}/_curses*.so \
| grep curses \
| grep libncurses.so && (echo "_curses.so linked against libncurses.so" ; exit 1)
# Ensure that the debug modules are linked against the debug libpython, and
# likewise for the optimized modules and libpython:
for Module in %{buildroot}/%{dynload_dir}/*.so ; do
case $Module in
*.%{SOABI_debug})
ldd $Module | grep %{py_INSTSONAME_optimized} &&
(echo Debug module $Module linked against optimized %{py_INSTSONAME_optimized} ; exit 1)
;;
*.%{SOABI_optimized})
ldd $Module | grep %{py_INSTSONAME_debug} &&
(echo Optimized module $Module linked against debug %{py_INSTSONAME_debug} ; exit 1)
;;
esac
done
# Create "/usr/bin/python3-debug", a symlink to the python3 debug binary, to
# avoid the user having to know the precise version and ABI flags. (see
# e.g. rhbz#676748):
%if 0%{?with_debug_build}
ln -s \
%{_bindir}/python%{LDVERSION_debug} \
%{buildroot}%{_bindir}/python3-debug
%endif
#
# Systemtap hooks:
#
%if 0%{?with_systemtap}
# Install a tapset for this libpython into tapsetdir, fixing up the path to the
# library:
mkdir -p %{buildroot}%{tapsetdir}
%ifarch ppc64 s390x x86_64 ia64 alpha sparc64
%global libpython_stp_optimized libpython%{pybasever}-64.stp
%global libpython_stp_debug libpython%{pybasever}-debug-64.stp
%else
%global libpython_stp_optimized libpython%{pybasever}-32.stp
%global libpython_stp_debug libpython%{pybasever}-debug-32.stp
%endif
sed \
-e "s|LIBRARY_PATH|%{_libdir}/%{py_INSTSONAME_optimized}|" \
%{_sourcedir}/libpython.stp \
> %{buildroot}%{tapsetdir}/%{libpython_stp_optimized}
2010-08-21 20:26:53 +00:00
%if 0%{?with_debug_build}
sed \
-e "s|LIBRARY_PATH|%{_libdir}/%{py_INSTSONAME_debug}|" \
%{_sourcedir}/libpython.stp \
> %{buildroot}%{tapsetdir}/%{libpython_stp_debug}
2010-08-21 20:26:53 +00:00
%endif # with_debug_build
%endif # with_systemtap
# ======================================================
# Running the upstream test suite
# ======================================================
2010-01-13 21:25:18 +00:00
%check
topdir=$(pwd)
CheckPython() {
ConfName=$1
ConfDir=$(pwd)/build/$ConfName
echo STARTING: CHECKING OF PYTHON FOR CONFIGURATION: $ConfName
# Note that we're running the tests using the version of the code in the
# builddir, not in the buildroot.
# Run the upstream test suite, setting "WITHIN_PYTHON_RPM_BUILD" so that the
# our non-standard decorators take effect on the relevant tests:
# @unittest._skipInRpmBuild(reason)
# @unittest._expectedFailureInRpmBuild
WITHIN_PYTHON_RPM_BUILD= \
LD_LIBRARY_PATH=$ConfDir $ConfDir/python -m test.regrtest \
--verbose --findleaks
2010-01-13 21:25:18 +00:00
echo FINISHED: CHECKING OF PYTHON FOR CONFIGURATION: $ConfName
}
%if 0%{run_selftest_suite}
# Check each of the configurations:
2010-08-21 20:26:53 +00:00
%if 0%{?with_debug_build}
CheckPython debug
2010-08-21 20:26:53 +00:00
%endif # with_debug_build
CheckPython optimized
%endif # run_selftest_suite
# ======================================================
# Cleaning up
# ======================================================
2010-01-13 21:25:18 +00:00
%clean
rm -fr %{buildroot}
2010-01-13 21:25:18 +00:00
# ======================================================
# Scriptlets
# ======================================================
2010-01-13 21:25:18 +00:00
%post libs -p /sbin/ldconfig
%postun libs -p /sbin/ldconfig
%files
2010-01-13 21:25:18 +00:00
%defattr(-, root, root)
%doc LICENSE README
%{_bindir}/pydoc*
%{_bindir}/python3
%{_bindir}/python%{pybasever}
%{_bindir}/python%{pybasever}mu
2010-01-13 21:25:18 +00:00
%{_mandir}/*/*
%files libs
%defattr(-,root,root,-)
%doc LICENSE README
2010-01-13 21:25:18 +00:00
%dir %{pylibdir}
%dir %{dynload_dir}
2011-02-21 16:28:42 +00:00
%{dynload_dir}/Python-%{version}-py%{pybasever}.egg-info
%{dynload_dir}/_bisect.%{SOABI_optimized}.so
%{dynload_dir}/_codecs_cn.%{SOABI_optimized}.so
%{dynload_dir}/_codecs_hk.%{SOABI_optimized}.so
%{dynload_dir}/_codecs_iso2022.%{SOABI_optimized}.so
%{dynload_dir}/_codecs_jp.%{SOABI_optimized}.so
%{dynload_dir}/_codecs_kr.%{SOABI_optimized}.so
%{dynload_dir}/_codecs_tw.%{SOABI_optimized}.so
%{dynload_dir}/_csv.%{SOABI_optimized}.so
%{dynload_dir}/_ctypes.%{SOABI_optimized}.so
%{dynload_dir}/_curses.%{SOABI_optimized}.so
%{dynload_dir}/_curses_panel.%{SOABI_optimized}.so
%{dynload_dir}/_dbm.%{SOABI_optimized}.so
%{dynload_dir}/_elementtree.%{SOABI_optimized}.so
%if %{with_gdbm}
%{dynload_dir}/_gdbm.%{SOABI_optimized}.so
%endif
%{dynload_dir}/_hashlib.%{SOABI_optimized}.so
%{dynload_dir}/_heapq.%{SOABI_optimized}.so
%{dynload_dir}/_json.%{SOABI_optimized}.so
%{dynload_dir}/_lsprof.%{SOABI_optimized}.so
%{dynload_dir}/_multibytecodec.%{SOABI_optimized}.so
%{dynload_dir}/_multiprocessing.%{SOABI_optimized}.so
%{dynload_dir}/_pickle.%{SOABI_optimized}.so
%{dynload_dir}/_posixsubprocess.%{SOABI_optimized}.so
%{dynload_dir}/_random.%{SOABI_optimized}.so
%{dynload_dir}/_socket.%{SOABI_optimized}.so
%{dynload_dir}/_sqlite3.%{SOABI_optimized}.so
%{dynload_dir}/_ssl.%{SOABI_optimized}.so
%{dynload_dir}/_struct.%{SOABI_optimized}.so
%{dynload_dir}/array.%{SOABI_optimized}.so
%{dynload_dir}/atexit.%{SOABI_optimized}.so
%{dynload_dir}/audioop.%{SOABI_optimized}.so
%{dynload_dir}/binascii.%{SOABI_optimized}.so
%{dynload_dir}/bz2.%{SOABI_optimized}.so
%{dynload_dir}/cmath.%{SOABI_optimized}.so
%{dynload_dir}/crypt.%{SOABI_optimized}.so
%{dynload_dir}/_datetime.%{SOABI_optimized}.so
%{dynload_dir}/fcntl.%{SOABI_optimized}.so
%{dynload_dir}/grp.%{SOABI_optimized}.so
%{dynload_dir}/math.%{SOABI_optimized}.so
%{dynload_dir}/mmap.%{SOABI_optimized}.so
%{dynload_dir}/nis.%{SOABI_optimized}.so
%{dynload_dir}/ossaudiodev.%{SOABI_optimized}.so
%{dynload_dir}/parser.%{SOABI_optimized}.so
%{dynload_dir}/pyexpat.%{SOABI_optimized}.so
%{dynload_dir}/readline.%{SOABI_optimized}.so
%{dynload_dir}/resource.%{SOABI_optimized}.so
%{dynload_dir}/select.%{SOABI_optimized}.so
%{dynload_dir}/spwd.%{SOABI_optimized}.so
%{dynload_dir}/syslog.%{SOABI_optimized}.so
%{dynload_dir}/termios.%{SOABI_optimized}.so
%{dynload_dir}/time.%{SOABI_optimized}.so
%{dynload_dir}/unicodedata.%{SOABI_optimized}.so
%{dynload_dir}/xxlimited.%{SOABI_optimized}.so
%{dynload_dir}/zlib.%{SOABI_optimized}.so
%dir %{pylibdir}/site-packages/
%dir %{pylibdir}/site-packages/__pycache__/
2010-01-13 21:25:18 +00:00
%{pylibdir}/site-packages/README
%{pylibdir}/*.py
%dir %{pylibdir}/__pycache__/
%{pylibdir}/__pycache__/*%{bytecode_suffixes}
2010-01-13 21:25:18 +00:00
%{pylibdir}/wsgiref.egg-info
%dir %{pylibdir}/concurrent/
%dir %{pylibdir}/concurrent/__pycache__/
%{pylibdir}/concurrent/*.py
%{pylibdir}/concurrent/__pycache__/*%{bytecode_suffixes}
%dir %{pylibdir}/concurrent/futures/
%dir %{pylibdir}/concurrent/futures/__pycache__/
%{pylibdir}/concurrent/futures/*.py
%{pylibdir}/concurrent/futures/__pycache__/*%{bytecode_suffixes}
%dir %{pylibdir}/ctypes/
%dir %{pylibdir}/ctypes/__pycache__/
%{pylibdir}/ctypes/*.py
%{pylibdir}/ctypes/__pycache__/*%{bytecode_suffixes}
2010-01-13 21:25:18 +00:00
%{pylibdir}/ctypes/macholib
2010-01-13 21:25:18 +00:00
%{pylibdir}/curses
%dir %{pylibdir}/dbm/
%dir %{pylibdir}/dbm/__pycache__/
%{pylibdir}/dbm/*.py
%{pylibdir}/dbm/__pycache__/*%{bytecode_suffixes}
%dir %{pylibdir}/distutils/
%dir %{pylibdir}/distutils/__pycache__/
%{pylibdir}/distutils/*.py
%{pylibdir}/distutils/__pycache__/*%{bytecode_suffixes}
2010-01-13 21:25:18 +00:00
%{pylibdir}/distutils/README
%{pylibdir}/distutils/command
%dir %{pylibdir}/email/
%dir %{pylibdir}/email/__pycache__/
%{pylibdir}/email/*.py
%{pylibdir}/email/__pycache__/*%{bytecode_suffixes}
2010-01-13 21:25:18 +00:00
%{pylibdir}/email/mime
2010-01-13 21:25:18 +00:00
%{pylibdir}/encodings
%{pylibdir}/html
%{pylibdir}/http
%{pylibdir}/idlelib
%dir %{pylibdir}/importlib/
%dir %{pylibdir}/importlib/__pycache__/
%{pylibdir}/importlib/*.py
%{pylibdir}/importlib/__pycache__/*%{bytecode_suffixes}
%dir %{pylibdir}/json/
%dir %{pylibdir}/json/__pycache__/
%{pylibdir}/json/*.py
%{pylibdir}/json/__pycache__/*%{bytecode_suffixes}
%{pylibdir}/lib2to3
%exclude %{pylibdir}/lib2to3/tests
2010-01-13 21:25:18 +00:00
%{pylibdir}/logging
%{pylibdir}/multiprocessing
%{pylibdir}/plat-linux2
%{pylibdir}/pydoc_data
%dir %{pylibdir}/sqlite3/
%dir %{pylibdir}/sqlite3/__pycache__/
%{pylibdir}/sqlite3/*.py
%{pylibdir}/sqlite3/__pycache__/*%{bytecode_suffixes}
%dir %{pylibdir}/test/
%dir %{pylibdir}/test/__pycache__/
%{pylibdir}/test/__init__.py
%{pylibdir}/test/support.py
%{pylibdir}/test/__pycache__/__init__%{bytecode_suffixes}
%{pylibdir}/test/__pycache__/support%{bytecode_suffixes}
%exclude %{pylibdir}/turtle.py
%exclude %{pylibdir}/__pycache__/turtle*%{bytecode_suffixes}
%dir %{pylibdir}/unittest/
%dir %{pylibdir}/unittest/__pycache__/
%{pylibdir}/unittest/*.py
%{pylibdir}/unittest/__pycache__/*%{bytecode_suffixes}
2010-01-13 21:25:18 +00:00
%{pylibdir}/urllib
%{pylibdir}/wsgiref
%{pylibdir}/xml
%{pylibdir}/xmlrpc
2010-01-13 21:25:18 +00:00
%if "%{_lib}" == "lib64"
%attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}
%attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}/site-packages
%attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}/site-packages/__pycache__/
2010-01-13 21:25:18 +00:00
%endif
# "Makefile" and the config-32/64.h file are needed by
# distutils/sysconfig.py:_init_posix(), so we include them in the core
# package, along with their parent directories (bug 531901):
%dir %{pylibdir}/config-%{LDVERSION_optimized}/
%{pylibdir}/config-%{LDVERSION_optimized}/Makefile
%dir %{_includedir}/python%{LDVERSION_optimized}/
%{_includedir}/python%{LDVERSION_optimized}/%{_pyconfig_h}
2010-01-13 21:25:18 +00:00
%{_libdir}/%{py_INSTSONAME_optimized}
%{_libdir}/libpython3.so
%if 0%{?with_systemtap}
%{tapsetdir}/%{libpython_stp_optimized}
%doc systemtap-example.stp pyfuntop.stp
%endif
2010-01-13 21:25:18 +00:00
%files devel
%defattr(-,root,root)
%{pylibdir}/config-%{LDVERSION_optimized}/*
%exclude %{pylibdir}/config-%{LDVERSION_optimized}/Makefile
%{_includedir}/python%{LDVERSION_optimized}/*.h
%exclude %{_includedir}/python%{LDVERSION_optimized}/%{_pyconfig_h}
2010-01-13 21:25:18 +00:00
%doc Misc/README.valgrind Misc/valgrind-python.supp Misc/gdbinit
%{_bindir}/python3-config
%{_bindir}/python%{pybasever}-config
%{_bindir}/python%{LDVERSION_optimized}-config
%{_libdir}/libpython%{LDVERSION_optimized}.so
%{_libdir}/pkgconfig/python-%{LDVERSION_optimized}.pc
%{_libdir}/pkgconfig/python-%{pybasever}.pc
%{_libdir}/pkgconfig/python3.pc
2010-01-13 21:25:18 +00:00
%config(noreplace) %{_sysconfdir}/rpm/macros.python3
%config(noreplace) %{_sysconfdir}/rpm/macros.pybytecompile
2010-01-13 21:25:18 +00:00
%files tools
%defattr(-,root,root,755)
%{_bindir}/python3-2to3
%{_bindir}/2to3-%{pybasever}
2010-01-13 21:25:18 +00:00
%{_bindir}/idle*
%{pylibdir}/Tools
%doc %{pylibdir}/Doc
%files tkinter
%defattr(-,root,root,755)
%{pylibdir}/tkinter
%exclude %{pylibdir}/tkinter/test
%{dynload_dir}/_tkinter.%{SOABI_optimized}.so
%{pylibdir}/turtle.py
%{pylibdir}/__pycache__/turtle*%{bytecode_suffixes}
%dir %{pylibdir}/turtledemo
%{pylibdir}/turtledemo/*.py
%{pylibdir}/turtledemo/*.txt
%{pylibdir}/turtledemo/*.cfg
%dir %{pylibdir}/turtledemo/__pycache__/
%{pylibdir}/turtledemo/__pycache__/*%{bytecode_suffixes}
2010-01-13 21:25:18 +00:00
%files test
%defattr(-, root, root)
%{pylibdir}/ctypes/test
%{pylibdir}/distutils/tests
%{pylibdir}/email/test
%{pylibdir}/importlib/test
%{pylibdir}/sqlite3/test
%{pylibdir}/test
%{dynload_dir}/_ctypes_test.%{SOABI_optimized}.so
%{dynload_dir}/_testcapi.%{SOABI_optimized}.so
2010-01-13 21:25:18 +00:00
%{pylibdir}/lib2to3/tests
%{pylibdir}/tkinter/test
%{pylibdir}/unittest/test
2010-01-13 21:25:18 +00:00
# We don't bother splitting the debug build out into further subpackages:
# if you need it, you're probably a developer.
# Hence the manifest is the combination of analogous files in the manifests of
# all of the other subpackages
2010-08-21 20:26:53 +00:00
%if 0%{?with_debug_build}
%files debug
%defattr(-,root,root,-)
# Analog of the core subpackage's files:
%{_bindir}/python%{LDVERSION_debug}
%{_bindir}/python3-debug
# Analog of the -libs subpackage's files:
# ...with debug builds of the built-in "extension" modules:
%{dynload_dir}/_bisect.%{SOABI_debug}.so
%{dynload_dir}/_codecs_cn.%{SOABI_debug}.so
%{dynload_dir}/_codecs_hk.%{SOABI_debug}.so
%{dynload_dir}/_codecs_iso2022.%{SOABI_debug}.so
%{dynload_dir}/_codecs_jp.%{SOABI_debug}.so
%{dynload_dir}/_codecs_kr.%{SOABI_debug}.so
%{dynload_dir}/_codecs_tw.%{SOABI_debug}.so
%{dynload_dir}/_csv.%{SOABI_debug}.so
%{dynload_dir}/_ctypes.%{SOABI_debug}.so
%{dynload_dir}/_curses.%{SOABI_debug}.so
%{dynload_dir}/_curses_panel.%{SOABI_debug}.so
%{dynload_dir}/_dbm.%{SOABI_debug}.so
%{dynload_dir}/_elementtree.%{SOABI_debug}.so
%if %{with_gdbm}
%{dynload_dir}/_gdbm.%{SOABI_debug}.so
%endif
%{dynload_dir}/_hashlib.%{SOABI_debug}.so
%{dynload_dir}/_heapq.%{SOABI_debug}.so
%{dynload_dir}/_json.%{SOABI_debug}.so
%{dynload_dir}/_lsprof.%{SOABI_debug}.so
%{dynload_dir}/_multibytecodec.%{SOABI_debug}.so
%{dynload_dir}/_multiprocessing.%{SOABI_debug}.so
%{dynload_dir}/_pickle.%{SOABI_debug}.so
%{dynload_dir}/_posixsubprocess.%{SOABI_debug}.so
%{dynload_dir}/_random.%{SOABI_debug}.so
%{dynload_dir}/_socket.%{SOABI_debug}.so
%{dynload_dir}/_sqlite3.%{SOABI_debug}.so
%{dynload_dir}/_ssl.%{SOABI_debug}.so
%{dynload_dir}/_struct.%{SOABI_debug}.so
%{dynload_dir}/array.%{SOABI_debug}.so
%{dynload_dir}/atexit.%{SOABI_debug}.so
%{dynload_dir}/audioop.%{SOABI_debug}.so
%{dynload_dir}/binascii.%{SOABI_debug}.so
%{dynload_dir}/bz2.%{SOABI_debug}.so
%{dynload_dir}/cmath.%{SOABI_debug}.so
%{dynload_dir}/crypt.%{SOABI_debug}.so
%{dynload_dir}/_datetime.%{SOABI_debug}.so
%{dynload_dir}/fcntl.%{SOABI_debug}.so
%{dynload_dir}/grp.%{SOABI_debug}.so
%{dynload_dir}/math.%{SOABI_debug}.so
%{dynload_dir}/mmap.%{SOABI_debug}.so
%{dynload_dir}/nis.%{SOABI_debug}.so
%{dynload_dir}/ossaudiodev.%{SOABI_debug}.so
%{dynload_dir}/parser.%{SOABI_debug}.so
%{dynload_dir}/pyexpat.%{SOABI_debug}.so
%{dynload_dir}/readline.%{SOABI_debug}.so
%{dynload_dir}/resource.%{SOABI_debug}.so
%{dynload_dir}/select.%{SOABI_debug}.so
%{dynload_dir}/spwd.%{SOABI_debug}.so
%{dynload_dir}/syslog.%{SOABI_debug}.so
%{dynload_dir}/termios.%{SOABI_debug}.so
%{dynload_dir}/time.%{SOABI_debug}.so
%{dynload_dir}/unicodedata.%{SOABI_debug}.so
%{dynload_dir}/zlib.%{SOABI_debug}.so
# No need to split things out the "Makefile" and the config-32/64.h file as we
# do for the regular build above (bug 531901), since they're all in one package
# now; they're listed below, under "-devel":
%{_libdir}/%{py_INSTSONAME_debug}
%if 0%{?with_systemtap}
%{tapsetdir}/%{libpython_stp_debug}
%endif
# Analog of the -devel subpackage's files:
%{pylibdir}/config-%{LDVERSION_debug}
%{_includedir}/python%{LDVERSION_debug}
%{_bindir}/python%{LDVERSION_debug}-config
%{_libdir}/libpython%{LDVERSION_debug}.so
%{_libdir}/pkgconfig/python-%{LDVERSION_debug}.pc
# Analog of the -tools subpackage's files:
# None for now; we could build precanned versions that have the appropriate
# shebang if needed
# Analog of the tkinter subpackage's files:
%{dynload_dir}/_tkinter.%{SOABI_debug}.so
# Analog of the -test subpackage's files:
%{dynload_dir}/_ctypes_test.%{SOABI_debug}.so
%{dynload_dir}/_testcapi.%{SOABI_debug}.so
2010-08-21 20:26:53 +00:00
%endif # with_debug_build
# We put the debug-gdb.py file inside /usr/lib/debug to avoid noise from
# ldconfig (rhbz:562980).
#
# The /usr/lib/rpm/redhat/macros defines %__debug_package to use
# debugfiles.list, and it appears that everything below /usr/lib/debug and
# (/usr/src/debug) gets added to this file (via LISTFILES) in
# /usr/lib/rpm/find-debuginfo.sh
#
# Hence by installing it below /usr/lib/debug we ensure it is added to the
# -debuginfo subpackage
# (if it doesn't, then the rpmbuild ought to fail since the debug-gdb.py
# payload file would be unpackaged)
# ======================================================
# Finally, the changelog:
# ======================================================
2010-01-13 21:25:18 +00:00
%changelog
* Mon Apr 30 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-5
- fix test_gdb.py (patch 156; rhbz#817072)
* Fri Apr 20 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-4
- avoid allocating thunks in ctypes unless absolutely necessary, to avoid
generating SELinux denials on "import ctypes" and "import uuid" when embedding
Python within httpd (patch 155; rhbz#814391)
* Fri Apr 20 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-3
- add explicit version requirements on expat to avoid linkage problems with
XML_SetHashSalt
* Thu Apr 12 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-2
- fix test_gdb (patch 153)
* Wed Apr 11 2012 David Malcolm <dmalcolm@redhat.com> - 3.2.3-1
- 3.2.3; refresh patch 102 (lib64); drop upstream patches 148 (gdbm magic
values), 149 (__pycache__ fix); add patch 152 (test_gdb regex)
* Thu Feb 9 2012 Thomas Spura <tomspur@fedoraproject.org> - 3.2.2-13
- use newly installed python for byte compiling (now for real)
* Sun Feb 5 2012 Thomas Spura <tomspur@fedoraproject.org> - 3.2.2-12
- use newly installed python for byte compiling (#787498)
* Wed Jan 4 2012 Ville Skyttä <ville.skytta@iki.fi> - 3.2.2-11
- Build with $RPM_LD_FLAGS (#756863).
- Use xz-compressed source tarball.
* Wed Dec 07 2011 Karsten Hopp <karsten@redhat.com> 3.2.2-10
- disable rAssertAlmostEqual in test_cmath on PPC (#750811)
* Mon Oct 17 2011 Rex Dieter <rdieter@fedoraproject.org> - 3.2.2-9
- python3-devel missing autogenerated pkgconfig() provides (#746751)
* Mon Oct 10 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-8
- cherrypick fix for distutils not using __pycache__ when byte-compiling
files (rhbz#722578)
* Fri Sep 30 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-7
- re-enable gdbm (patch 148; rhbz#742242)
* Fri Sep 16 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-6
- add a sys._debugmallocstats() function (patch 147)
* Wed Sep 14 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-5
- support OpenSSL FIPS mode in _hashlib and hashlib; don't build the _md5 and
_sha* modules, relying on _hashlib in hashlib (rhbz#563986; patch 146)
* Tue Sep 13 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-4
- disable gdbm module to prepare for gdbm soname bump
* Mon Sep 12 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-3
- renumber and rename patches for consistency with python.spec (8 to 55, 106
to 104, 6 to 111, 104 to 113, 105 to 114, 125, 131, 130 to 143)
* Sat Sep 10 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-2
- rewrite of "check", introducing downstream-only hooks for skipping specific
cases in an rpmbuild (patch 132), and fixing/skipping failing tests in a more
fine-grained manner than before; (patches 106, 133-142 sparsely, moving
patches for consistency with python.spec: 128 to 134, 126 to 135, 127 to 141)
2011-09-06 16:44:03 +00:00
* Tue Sep 6 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.2-1
- 3.2.2
* Thu Sep 1 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.1-7
- run selftests with "--verbose"
- disable parts of test_io on ppc (rhbz#732998)
* Wed Aug 31 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.1-6
- use "--findleaks --verbose3" when running test suite
* Tue Aug 23 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.1-5
- re-enable and fix the --with-tsc option on ppc64, and rework it on 32-bit
ppc to avoid aliasing violations (patch 130; rhbz#698726)
* Tue Aug 23 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.1-4
- don't use --with-tsc on ppc64 debug builds (rhbz#698726)
* Thu Aug 18 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.1-3
- add %%python3_version to the rpm macros (rhbz#719082)
2011-07-12 02:18:56 +00:00
* Mon Jul 11 2011 Dennis Gilmore <dennis@ausil.us> - 3.2.1-2
- disable some tests on sparc arches
* Mon Jul 11 2011 David Malcolm <dmalcolm@redhat.com> - 3.2.1-1
- 3.2.1; refresh lib64 patch (102), subprocess unit test patch (129), disabling
of static library build (due to Modules/_testembed; patch 6), autotool
intermediates (patch 300)
* Fri Jul 8 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-5
- use the gdb hooks from the upstream tarball, rather than keeping our own copy
* Fri Jul 8 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-4
- don't run test_openpty and test_pty in %%check
* Fri Jul 8 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-3
- cleanup of BuildRequires; add comment headings to specfile sections
* Tue Apr 19 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-2
- fix the libpython.stp systemtap tapset (rhbz#697730)
2011-02-21 16:28:42 +00:00
* Mon Feb 21 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-1
- 3.2
- drop alphatag
- regenerate autotool patch
* Mon Feb 14 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-0.13.rc3
- add a /usr/bin/python3-debug symlink within the debug subpackage
2011-02-14 18:55:48 +00:00
* Mon Feb 14 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-0.12.rc3
- 3.2rc3
- regenerate autotool patch
* Wed Feb 09 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 3.2-0.11.rc2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
2011-02-09 00:35:54 +00:00
* Mon Jan 31 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-0.10.rc2
- 3.2rc2
* Mon Jan 17 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-0.9.rc1
- 3.2rc1
- rework patch 6 (static lib removal)
- remove upstreamed patch 130 (ppc debug build)
- regenerate patch 300 (autotool intermediates)
- updated packaging to reflect upstream rewrite of "Demo" (issue 7962)
- added libpython3.so and 2to3-3.2
* Wed Jan 5 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-0.8.b2
- set EXTRA_CFLAGS to our CFLAGS, rather than overriding OPT, fixing a linker
error with dynamic annotations (when configured using --with-valgrind)
- fix the ppc build of the debug configuration (patch 130; rhbz#661510)
* Tue Jan 4 2011 David Malcolm <dmalcolm@redhat.com> - 3.2-0.7.b2
- add --with-valgrind to configuration (on architectures that support this)
* Wed Dec 29 2010 David Malcolm <dmalcolm@redhat.com> - 3.2-0.6.b2
- work around test_subprocess failure seen in koji (patch 129)
* Tue Dec 28 2010 David Malcolm <dmalcolm@redhat.com> - 3.2-0.5.b2
- 3.2b2
- rework patch 3 (removal of mimeaudio tests), patch 6 (no static libs),
patch 8 (systemtap), patch 102 (lib64)
- remove patch 4 (rendered redundant by upstream r85537), patch 103 (PEP 3149),
patch 110 (upstreamed expat fix), patch 111 (parallel build fix for grammar
fixed upstream)
- regenerate patch 300 (autotool intermediates)
- workaround COUNT_ALLOCS weakref issues in test suite (patch 126, patch 127,
patch 128)
- stop using runtest.sh in %%check (dropped by upstream), replacing with
regrtest; fixup list of failing tests
- introduce "pyshortver", "SOABI_optimized" and "SOABI_debug" macros
- rework manifests of shared libraries to use "SOABI_" macros, reflecting
PEP 3149
- drop itertools, operator and _collections modules from the manifests as py3k
commit r84058 moved these inside libpython; json/tests moved to test/json_tests
- move turtle code into the tkinter subpackage
* Wed Nov 17 2010 David Malcolm <dmalcolm@redhat.com> - 3.2-0.5.a1
- fix sysconfig to not rely on the -devel subpackage (rhbz#653058)
* Thu Sep 9 2010 David Malcolm <dmalcolm@redhat.com> - 3.2-0.4.a1
- move most of the content of the core package to the libs subpackage, given
that the libs aren't meaningfully usable without the standard libraries
* Wed Sep 8 2010 David Malcolm <dmalcolm@redhat.com> - 3.2-0.3.a1
- Move test.support to core package (rhbz#596258)
- Add various missing __pycache__ directories to payload
* Sun Aug 22 2010 Toshio Kuratomi <toshio@fedoraproject.org> - 3.2-0.2.a1
- Add __pycache__ directory for site-packages
* Sun Aug 22 2010 Thomas Spura <tomspur@fedoraproject.org> - 3.2-0.1.a1
- on 64bit "stdlib" was still "/usr/lib/python*" (modify *lib64.patch)
- make find-provides-without-python-sonames.sh 64bit aware
* Sat Aug 21 2010 David Malcolm <dmalcolm@redhat.com> - 3.2-0.0.a1
- 3.2a1; add alphatag
- rework %%files in the light of PEP 3147 (__pycache__)
- drop our configuration patch to Setup.dist (patch 0): setup.py should do a
better job of things, and the %%files explicitly lists our modules (r82746
appears to break the old way of doing things). This leads to various modules
changing from "foomodule.so" to "foo.so". It also leads to the optimized build
dropping the _sha1, _sha256 and _sha512 modules, but these are provided by
_hashlib; _weakref becomes a builtin module; xxsubtype goes away (it's only for
testing/devel purposes)
- fixup patches 3, 4, 6, 8, 102, 103, 105, 111 for the rebase
- remove upstream patches: 7 (system expat), 106, 107, 108 (audioop reformat
plus CVE-2010-1634 and CVE-2010-2089), 109 (CVE-2008-5983)
- add machinery for rebuilding "configure" and friends, using the correct
version of autoconf (patch 300)
- patch the debug build's usage of COUNT_ALLOCS to be less verbose (patch 125)
- "modulator" was removed upstream
- drop "-b" from patch applications affecting .py files to avoid littering the
installation tree
* Thu Aug 19 2010 Toshio Kuratomi <toshio@fedoraproject.org> - 3.1.2-13
- Turn on computed-gotos.
- Fix for parallel make and graminit.c
2010-07-02 20:32:10 +00:00
* Fri Jul 2 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-12
- rebuild
* Fri Jul 2 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-11
- Fix an incompatibility between pyexpat and the system expat-2.0.1 that led to
a segfault running test_pyexpat.py (patch 110; upstream issue 9054; rhbz#610312)
* Fri Jun 4 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-10
- ensure that the compiler is invoked with "-fwrapv" (rhbz#594819)
- reformat whitespace in audioop.c (patch 106)
- CVE-2010-1634: fix various integer overflow checks in the audioop
module (patch 107)
- CVE-2010-2089: further checks within the audioop module (patch 108)
- CVE-2008-5983: the new PySys_SetArgvEx entry point from r81399 (patch 109)
* Thu May 27 2010 Dan Horák <dan[at]danny.cz> - 3.1.2-9
- reading the timestamp counter is available only on some arches (see Python/ceval.c)
* Wed May 26 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-8
- add flags for statvfs.f_flag to the constant list in posixmodule (i.e. "os")
(patch 105)
* Tue May 25 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-7
- add configure-time support for COUNT_ALLOCS and CALL_PROFILE debug options
(patch 104); enable them and the WITH_TSC option within the debug build
* Mon May 24 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-6
- build and install two different configurations of Python 3: debug and
standard, packaging the debug build in a new "python3-debug" subpackage
(patch 103)
* Tue Apr 13 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-5
- exclude test_http_cookies when running selftests, due to hang seen on
http://koji.fedoraproject.org/koji/taskinfo?taskID=2088463 (cancelled after
11 hours)
- update python-gdb.py from v5 to py3k version submitted upstream
* Wed Mar 31 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-4
- update python-gdb.py from v4 to v5 (improving performance and stability,
adding commands)
* Thu Mar 25 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-3
- update python-gdb.py from v3 to v4 (fixing infinite recursion on reference
cycles and tracebacks on bytes 0x80-0xff in strings, adding handlers for sets
and exceptions)
* Wed Mar 24 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-2
- refresh gdb hooks to v3 (reworking how they are packaged)
* Sun Mar 21 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.2-1
- update to 3.1.2: http://www.python.org/download/releases/3.1.2/
- drop upstreamed patch 2 (.pyc permissions handling)
- drop upstream patch 5 (fix for the test_tk and test_ttk_* selftests)
- drop upstreamed patch 200 (path-fixing script)
* Sat Mar 20 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-28
- fix typo in libpython.stp (rhbz:575336)
* Fri Mar 12 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-27
- add pyfuntop.stp example (source 7)
- convert usage of $$RPM_BUILD_ROOT to %%{buildroot} throughout, for
consistency with python.spec
* Mon Feb 15 2010 Thomas Spura <tomspur@fedoraproject.org> - 3.1.1-26
- rebuild for new package of redhat-rpm-config (rhbz:564527)
- use 'install -p' when running 'make install'
* Fri Feb 12 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-25
- split configure options into multiple lines for easy of editing
- add systemtap static markers (wcohen, mjw, dmalcolm; patch 8), a systemtap
tapset defining "python.function.entry" and "python.function.return" to make
the markers easy to use (dmalcolm; source 5), and an example of using the
tapset to the docs (dmalcolm; source 6) (rhbz:545179)
* Mon Feb 8 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-24
- move the -gdb.py file from %%{_libdir}/INSTSONAME-gdb.py to
%%{_prefix}/lib/debug/%%{_libdir}/INSTSONAME.debug-gdb.py to avoid noise from
ldconfig (bug 562980), and which should also ensure it becomes part of the
debuginfo subpackage, rather than the libs subpackage
- introduce %%{py_SOVERSION} and %%{py_INSTSONAME} to reflect the upstream
configure script, and to avoid fragile scripts that try to figure this out
dynamically (e.g. for the -gdb.py change)
* Mon Feb 8 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-23
- add gdb hooks for easier debugging (Source 4)
* Thu Jan 28 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-22
- update python-3.1.1-config.patch to remove downstream customization of build
of pyexpat and elementtree modules
- add patch adapted from upstream (patch 7) to add support for building against
system expat; add --with-system-expat to "configure" invocation
- remove embedded copies of expat and zlib from source tree during "prep"
* Mon Jan 25 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-21
- introduce %%{dynload_dir} macro
- explicitly list all lib-dynload files, rather than dynamically gathering the
payload into a temporary text file, so that we can be sure what we are
shipping
- introduce a macros.pybytecompile source file, to help with packaging python3
modules (Source3; written by Toshio)
- rename "2to3-3" to "python3-2to3" to better reflect python 3 module packaging
plans
* Mon Jan 25 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-20
- change python-3.1.1-config.patch to remove our downstream change to curses
configuration in Modules/Setup.dist, so that the curses modules are built using
setup.py with the downstream default (linking against libncursesw.so, rather
than libncurses.so), rather than within the Makefile; add a test to %%install
to verify the dso files that the curses module is linked against the correct
DSO (bug 539917; changes _cursesmodule.so -> _curses.so)
* Fri Jan 22 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-19
- add %%py3dir macro to macros.python3 (to be used during unified python 2/3
builds for setting up the python3 copy of the source tree)
* Wed Jan 20 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-18
- move lib2to3 from -tools subpackage to main package (bug 556667)
* Sun Jan 17 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-17
- patch Makefile.pre.in to avoid building static library (patch 6, bug 556092)
* Fri Jan 15 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-16
- use the %%{_isa} macro to ensure that the python-devel dependency on python
is for the correct multilib arch (#555943)
- delete bundled copy of libffi to make sure we use the system one
* Fri Jan 15 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-15
- fix the URLs output by pydoc so they point at python.org's 3.1 build of the
docs, rather than the 2.6 build
* Wed Jan 13 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-14
- replace references to /usr with %%{_prefix}; replace references to
/usr/include with %%{_includedir} (Toshio)
2010-01-13 21:25:18 +00:00
* Mon Jan 11 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-13
- fix permission on find-provides-without-python-sonames.sh from 775 to 755
* Mon Jan 11 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-12
- remove build-time requirements on tix and tk, since we already have
build-time requirements on the -devel subpackages for each of these (Thomas
Spura)
- replace usage of %%define with %%global (Thomas Spura)
- remove forcing of CC=gcc as this old workaround for bug 109268 appears to
longer be necessary
- move various test files from the "tools"/"tkinter" subpackages to the "test"
subpackage
* Thu Jan 7 2010 David Malcolm <dmalcolm@redhat.com> - 3.1.1-11
- add %%check section (thanks to Thomas Spura)
- update patch 4 to use correct shebang line
- get rid of stray patch file from buildroot
* Tue Nov 17 2009 Andrew McNabb <amcnabb@mcnabbs.org> - 3.1.1-10
- switched a few instances of "find |xargs" to "find -exec" for consistency.
- made the description of __os_install_post more accurate.
* Wed Nov 4 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-9
- add macros.python3 to the -devel subpackage, containing common macros for use
when packaging python3 modules
* Tue Nov 3 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-8
- add a provides of "python(abi)" (see bug 532118)
- fix issues identified by a.badger in package review (bug 526126, comment 39):
- use "3" thoughout metadata, rather than "3.*"
- remove conditional around "pkg-config openssl"
- use standard cleanup of RPM_BUILD_ROOT
- replace hardcoded references to /usr with _prefix macro
- stop removing egg-info files
- use /usr/bin/python3.1 rather than /use/bin/env python3.1 when fixing
up shebang lines
- stop attempting to remove no-longer-present .cvsignore files
- move the post/postun sections above the "files" sections
* Thu Oct 29 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-7
- remove commented-away patch 51 (python-2.6-distutils_rpm.patch): the -O1
flag is used by default in the upstream code
- "Makefile" and the config-32/64.h file are needed by distutils/sysconfig.py
_init_posix(), so we include them in the core package, along with their parent
directories (bug 531901)
* Tue Oct 27 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-6
- reword description, based on suggestion by amcnabb
- fix the test_email and test_imp selftests (patch 3 and patch 4 respectively)
- fix the test_tk and test_ttk_* selftests (patch 5)
- fix up the specfile's handling of shebang/perms to avoid corrupting
test_httpservers.py (sed command suggested by amcnabb)
* Thu Oct 22 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-5
- fixup importlib/_bootstrap.py so that it correctly handles being unable to
open .pyc files for writing (patch 2, upstream issue 7187)
- actually apply the rpath patch (patch 1)
* Thu Oct 22 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-4
- update patch0's setup of the crypt module to link it against libcrypt
- update patch0 to comment "datetimemodule" back out, so that it is built
using setup.py (see Setup, option 3), thus linking it statically against
timemodule.c and thus avoiding a run-time "undefined symbol:
_PyTime_DoubleToTimet" failure on "import datetime"
* Wed Oct 21 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-3
- remove executable flag from various files that shouldn't have it
- fix end-of-line encodings
- fix a character encoding
* Tue Oct 20 2009 David Malcolm <dmalcolm@redhat.com> - 3.1.1-2
- disable invocation of brp-python-bytecompile in postprocessing, since
it would be with the wrong version of python (adapted from ivazquez'
python3000 specfile)
- use a custom implementation of __find_provides in order to filter out bogus
provides lines for the various .so modules
- fixup distutils/unixccompiler.py to remove standard library path from rpath
(patch 1, was Patch0 in ivazquez' python3000 specfile)
- split out libraries into a -libs subpackage
- update summaries and descriptions, basing content on ivazquez' specfile
- fixup executable permissions on .py, .xpm and .xbm files, based on work in
ivazquez's specfile
- get rid of DOS batch files
- fixup permissions for shared libraries from non-standard 555 to standard 755
- move /usr/bin/python*-config to the -devel subpackage
- mark various directories as being documentation
* Thu Sep 24 2009 Andrew McNabb <amcnabb@mcnabbs.org> 3.1.1-1
- Initial package for Python 3.