rpms/python3.11
3
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
4aab458c04
python3.11/python-3.1.1-config.patch
dmalcolm 113725aa70 - change python-3.1.1-config.patch to remove our downstream change to 
curses configuration in Modules/Setup.dist, so that the curses modules
    are built using setup.py with the downstream default (linking against
    libncursesw.so, rather than libncurses.so), rather than within the
    Makefile; add a test to %%install to verify the dso files that the
    curses module is linked against the correct DSO (bug 539917; changes
    _cursesmodule.so -> _curses.so)
2010-01-25 18:44:42 +00:00

234 lines
8.4 KiB
Diff
Raw Blame History

--- Python-3.1.1/Modules/Setup.dist.config 2009-06-04 03:30:30.000000000 -0600
+++ Python-3.1.1/Modules/Setup.dist 2009-09-25 12:14:38.000000000 -0600
@@ -141,7 +141,7 @@
# modules are to be built as shared libraries (see above for more
# detail; also note that *static* reverses this effect):
-#*shared*
+*shared*
# GNU readline. Unlike previous Python incarnations, GNU readline is
# now incorporated in an optional module, configured in the Setup file
@@ -151,71 +151,71 @@
# it, depending on your system -- see the GNU readline instructions.
# It's okay for this to be a shared library, too.
-#readline readline.c -lreadline -ltermcap
+readline readline.c -lreadline -ltermcap
# Modules that should always be present (non UNIX dependent):
-#array arraymodule.c # array objects
-#cmath cmathmodule.c # -lm # complex math library functions
-#math mathmodule.c # -lm # math library functions, e.g. sin()
-#_struct _struct.c # binary structure packing/unpacking
-#time timemodule.c # -lm # time operations and variables
-#operator operator.c # operator.add() and similar goodies
-#_weakref _weakref.c # basic weak reference support
-#_testcapi _testcapimodule.c # Python C API test module
-#_random _randommodule.c # Random number generator
-#_collections _collectionsmodule.c # Container types
-#itertools itertoolsmodule.c # Functions creating iterators for efficient looping
-#atexit atexitmodule.c # Register functions to be run at interpreter-shutdown
-#_elementtree -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI _elementtree.c # elementtree accelerator
-#_pickle _pickle.c # pickle accelerator
-#datetime datetimemodule.c # date/time type
-#_bisect _bisectmodule.c # Bisection algorithms
-#_heapq _heapqmodule.c # Heap queue algorithm
+array arraymodule.c # array objects
+cmath cmathmodule.c # -lm # complex math library functions
+math mathmodule.c # -lm # math library functions, e.g. sin()
+_struct _struct.c # binary structure packing/unpacking
+time timemodule.c # -lm # time operations and variables
+operator operator.c # operator.add() and similar goodies
+_weakref _weakref.c # basic weak reference support
+_testcapi _testcapimodule.c # Python C API test module
+_random _randommodule.c # Random number generator
+_collections _collectionsmodule.c # Container types
+itertools itertoolsmodule.c # Functions creating iterators for efficient looping
+atexit atexitmodule.c # Register functions to be run at interpreter-shutdown
+_elementtree -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI _elementtree.c # elementtree accelerator
+_pickle _pickle.c # pickle accelerator
+#datetime datetimemodule.c # date/time type
+_bisect _bisectmodule.c # Bisection algorithms
+_heapq _heapqmodule.c # Heap queue algorithm
-#unicodedata unicodedata.c # static Unicode character database
+unicodedata unicodedata.c # static Unicode character database
# Modules with some UNIX dependencies -- on by default:
# (If you have a really backward UNIX, select and socket may not be
# supported...)
-#fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
-#spwd spwdmodule.c # spwd(3)
-#grp grpmodule.c # grp(3)
-#select selectmodule.c # select(2); not on ancient System V
+fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
+spwd spwdmodule.c # spwd(3)
+grp grpmodule.c # grp(3)
+select selectmodule.c # select(2); not on ancient System V
# Memory-mapped files (also works on Win32).
-#mmap mmapmodule.c
+mmap mmapmodule.c
# CSV file helper
-#_csv _csv.c
+_csv _csv.c
# Socket module helper for socket(2)
-#_socket socketmodule.c
+_socket socketmodule.c
# Socket module helper for SSL support; you must comment out the other
# socket line above, and possibly edit the SSL variable:
#SSL=/usr/local/ssl
-#_ssl _ssl.c \
-# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
-# -L$(SSL)/lib -lssl -lcrypto
+_ssl _ssl.c \
+ -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
+ -L$(SSL)/lib -lssl -lcrypto
# The crypt module is now disabled by default because it breaks builds
# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
#
# First, look at Setup.config; configure may have set this for you.
-#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems
+crypt cryptmodule.c -lcrypt # crypt(3); needs -lcrypt on some systems
# Some more UNIX dependent modules -- off by default, since these
# are not supported by all UNIX systems:
-#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere
-#termios termios.c # Steen Lumholt's termios module
-#resource resource.c # Jeremy Hylton's rlimit interface
+nis nismodule.c -lnsl # Sun yellow pages -- not everywhere
+termios termios.c # Steen Lumholt's termios module
+resource resource.c # Jeremy Hylton's rlimit interface
# Multimedia modules -- off by default.
@@ -223,7 +223,7 @@
# #993173 says audioop works on 64-bit platforms, though.
# These represent audio samples or images as strings:
-#audioop audioop.c # Operations on audio samples
+audioop audioop.c # Operations on audio samples
# Note that the _md5 and _sha modules are normally only built if the
@@ -238,9 +238,9 @@
# The _sha module implements the SHA checksum algorithms.
# (NIST's Secure Hash Algorithms.)
-#_sha shamodule.c
-#_sha256 sha256module.c
-#_sha512 sha512module.c
+_sha1 sha1module.c
+_sha256 sha256module.c
+_sha512 sha512module.c
# The _tkinter module.
@@ -255,7 +255,7 @@
# every system.
# *** Always uncomment this (leave the leading underscore in!):
-# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
+_tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
# -L/usr/local/lib \
# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
@@ -265,7 +265,7 @@
# *** Or uncomment this for Solaris:
# -I/usr/openwin/include \
# *** Uncomment and edit for Tix extension only:
-# -DWITH_TIX -ltix8.1.8.2 \
+ -DWITH_TIX -ltix \
# *** Uncomment and edit for BLT extension only:
# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
# *** Uncomment and edit for PIL (TkImaging) extension only:
@@ -274,7 +274,7 @@
# *** Uncomment and edit for TOGL extension only:
# -DWITH_TOGL togl.c \
# *** Uncomment and edit to reflect your Tcl/Tk versions:
-# -ltk8.2 -ltcl8.2 \
+ -ltk -ltcl \
# *** Uncomment and edit to reflect where your X11 libraries are:
# -L/usr/X11R6/lib \
# *** Or uncomment this for Solaris:
@@ -284,10 +284,10 @@
# *** Uncomment for AIX:
# -lld \
# *** Always uncomment this; X11 libraries to link with:
-# -lX11
+ -lX11
# Lance Ellinghaus's syslog module
-#syslog syslogmodule.c # syslog daemon interface
+syslog syslogmodule.c # syslog daemon interface
# Curses support, requring the System V version of curses, often
@@ -321,14 +321,14 @@
#
# First, look at Setup.config; configure may have set this for you.
-#_gdbm _gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
+_gdbm _gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
# Helper module for various ascii-encoders
-#binascii binascii.c
+binascii binascii.c
# Fred Drake's interface to the Python parser
-#parser parsermodule.c
+parser parsermodule.c
# Lee Busby's SIGFPE modules.
@@ -351,7 +351,7 @@
# Andrew Kuchling's zlib module.
# This require zlib 1.1.3 (or later).
# See http://www.gzip.org/zlib/
-#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
+zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
# Interface to the Expat XML parser
#
@@ -364,19 +364,19 @@
#
# More information on Expat can be found at www.libexpat.org.
#
-#pyexpat expat/xmlparse.c expat/xmlrole.c expat/xmltok.c pyexpat.c -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI
+pyexpat expat/xmlparse.c expat/xmlrole.c expat/xmltok.c pyexpat.c -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI
# Hye-Shik Chang's CJKCodecs
# multibytecodec is required for all the other CJK codec modules
-#_multibytecodec cjkcodecs/multibytecodec.c
+_multibytecodec cjkcodecs/multibytecodec.c
-#_codecs_cn cjkcodecs/_codecs_cn.c
-#_codecs_hk cjkcodecs/_codecs_hk.c
-#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
-#_codecs_jp cjkcodecs/_codecs_jp.c
-#_codecs_kr cjkcodecs/_codecs_kr.c
-#_codecs_tw cjkcodecs/_codecs_tw.c
+_codecs_cn cjkcodecs/_codecs_cn.c
+_codecs_hk cjkcodecs/_codecs_hk.c
+_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
+_codecs_jp cjkcodecs/_codecs_jp.c
+_codecs_kr cjkcodecs/_codecs_kr.c
+_codecs_tw cjkcodecs/_codecs_tw.c
# Example -- included for reference only:
# xx xxmodule.c
Reference in New Issue View Git Blame Copy Permalink