python-blivet/.gitignore

83 lines
1.6 KiB
Plaintext
Raw Normal View History

2013-01-25 22:49:10 +00:00
/blivet-0.4.tar.gz
Add mountOnly to turnOnFilesystems (bcl) - Update lvm scanning to account for new ignored device handling. (dlehman) - Scan in all devices and then hide those that use ignored disks. (dlehman) - Adjust child counts correctly when unhiding a device. (dlehman) - Generate lvm config args each time they're needed/used. (dlehman) - Add ability to grab 70-anaconda.rules udev data directly. (dlehman) - Add support for active luks mappings at populate time. (dlehman) - Don't require nss, required only for escrow key support. (dlehman) - Update the TODO list. (dlehman) - Add missing constant DMI_CHASSIS_VENDOR. (dlehman) - Allow for multiple calls to DeviceTree.processActions. (#881023,#846573) (dlehman) - Use CGit snaphot URL for Source in specfile. (dlehman) - Streamline some logic in storageInitialize. (dlehman) - Don't re-add deleted or hidden devices during DeviceTree.populate. (dlehman) - Only run findExistingInstallations and start iscsi, &c in installer mode. (dlehman) - Do not change device status during populate in normal mode. (#817064) (dlehman) - Drop old code related to saving clearPartType from pre-f18. (dlehman) - check for skipping bootloader in doIt (bcl) - check for stage1 when not installing bootloader (#882065,#895232) (bcl) - explicitly detect iso9660 on a disk (#903158) (bcl) - Fix several problems in python-blivet.spec. (dlehman) - Remove #!/usr/bin/python from tsort.py (dlehman) - Update COPYING file. (dlehman) - Add a Requires for dmidecode on x86. (dlehman)
2013-02-08 21:14:55 +00:00
/blivet-0.5.tar.gz
/blivet-0.6.tar.gz
/blivet-0.7.tar.gz
2013-03-13 16:01:57 +00:00
/blivet-0.8.tar.gz
/blivet-0.9.tar.gz
2013-04-09 22:01:22 +00:00
/blivet-0.10.tar.gz
2013-04-15 20:37:24 +00:00
/blivet-0.11.tar.gz
2013-05-03 19:56:00 +00:00
/blivet-0.12.tar.gz
/blivet-0.13.tar.gz
2013-05-15 19:10:34 +00:00
/blivet-0.14.tar.gz
/blivet-0.15.tar.gz
/blivet-0.16.tar.gz
/blivet-0.17.tar.gz
/blivet-0.18.tar.gz
/blivet-0.19.tar.gz
/blivet-0.20.tar.gz
/blivet-0.21.tar.gz
/blivet-0.22.tar.gz
/blivet-0.23.tar.gz
/blivet-0.24.tar.gz
/blivet-0.25.tar.gz
/blivet-0.26.tar.gz
/blivet-0.27.tar.gz
/blivet-0.28.tar.gz
/blivet-0.29.tar.gz
/blivet-0.30.tar.gz
/blivet-0.31.tar.gz
/blivet-0.32.tar.gz
/blivet-0.33.tar.gz
/blivet-0.34.tar.gz
- Convert everything to use Size. (dlehman) - Allow negative sizes. (dlehman) - Fix return value of Size.convertTo with a spec of bytes. (dlehman) - Discard partial bytes in Size constructor. (dlehman) - Prefer binary prefixes since everything is really based on them. (dlehman) - Fix a few minor problems introduced by recent raid level changes. (dlehman) - Move label setter and getter into DeviceFormat class (#1038590) (amulhern) - Add a test for labeling swap devices (#1038590) (amulhern) - Default to None to mean none, rather than empty string (#1038590) (amulhern) - Add a labelFormatOK method to the DeviceFormat's interface (#1038590) (amulhern) - Indicate whether the filesystem can label (#1038590) (amulhern) - Restore ability to write an empty label where possible (#1038590) (amulhern) - More tests to check writing and reading labels (#1038590) (amulhern) - Remove fsConfigFromFile (#1038590) (amulhern) - Changes to the handling of filesystem labeling (#1038590) (amulhern) - Add some simple tests for file formats. (amulhern) - Give DeviceFormat objects an id (#1043763) (amulhern) - Refactor to use ObjectID class (#1043763) (amulhern) - Make a class that creates a unique-per-class id for objects (#1043763) (amulhern) - Revert "Make a class that creates a unique-per-class id for objects (#1043763)" (amulhern) - Revert "Give DeviceFormat objects an object_id (#1043763)" (amulhern) - Make the maximum end sector for PReP boot more benevolent (#1029893) (vpodzime) - Give DeviceFormat objects an object_id (#1043763) (amulhern) - Make a class that creates a unique-per-class id for objects (#1043763) (amulhern) - Make get_device_format_class return None if class not found (#1043763) (amulhern) - A few simple unit tests for some formats methods (#1043763) (amulhern) - Don't translate format names (dshea)
2014-01-11 00:17:06 +00:00
/blivet-0.35.tar.gz
/blivet-0.36.tar.gz
- Only do SELinux context resets if in installer mode (#1038146) (amulhern) - Look up SELinux context for lost+found where it is needed (#1038146) (amulhern) - Don't reset the SELinux context before the filesystem is mounted (#1038146) (amulhern) - Test setting selinux context on lost+found (#1038146) (amulhern) - Only retrieve the unit specifier once (dshea) - Fix the Device.id usage. (dshea) - Accept both English and localized sizes in Size specs. (dshea) - Use a namedtuple to store information on unit prefixes (dshea) - Remove en_spec Size parameters. (dshea) - Fix potential traceback in devicetree.populate. (#1055523) (dlehman) - Fall back on relabeling app where available (#1038590) (amulhern) - Change the meaning of label field values (#1038590) (amulhern) - Enable labeling on NTFS filesystem (#1038590) (amulhern) - Enable labeling on HFS filesystem (#1038590) (amulhern) - Add a method that indicates ability to relabel (#1038590) (amulhern) - Use filesystem creation app to set filesystem label (#1038590) (amulhern) - Import errors so FSError name is resolved (#1038590) (amulhern) - Remove BTRFS._getFormatOptions (#1038590) (amulhern) - Make an additional class for labeling abstractions (#1038590) (amulhern) - Fix copyright date (#1038590) (amulhern) - Remove redundant _defaultFormatOptions field (#1038590) (amulhern) - Remove code about unsetting a label (#1038590) (amulhern) - Return None if the filesystem has no label (#1038590) (amulhern) - Removed redundant check for existance of filesystem (#1038590) (amulhern) - Have writeLabel throw a more informative exception (#1038590) (amulhern)
2014-01-23 01:45:02 +00:00
/blivet-0.37.tar.gz
/blivet-0.38.tar.gz
/blivet-0.39.tar.gz
/blivet-0.40.tar.gz
/blivet-0.41.tar.gz
/blivet-0.42.tar.gz
/blivet-0.43.tar.gz
/blivet-0.44.tar.gz
/blivet-0.45.tar.gz
- Adapt callers to use the new parent list interface. (dlehman) - Change management of Device parents to use a simple list interface. (dlehman) - Convert ContainerDevice to an abstract base class. (dlehman) - Set device uuid before calling Device ctor. (dlehman) - Improve the mechanism for VG completeness. (dlehman) - Support mutually-obsoleting actions. (dlehman) - Add some checking to MDRaidArrayDevice._setSpares. (dlehman) - Make sorting by action type part of the action classes. (dlehman) - Add action classes for container member set management. (dlehman) - Add a property to provide consistent access to parent container device. (dlehman) - Add type-specific methods for member set management. (dlehman) - Adapt callers to new method names for add/remove member device. (dlehman) - Add a ContainerDevice class to consolidate member management code. (dlehman) - Add backend functions for container member set management. (dlehman) - Teardown RAID device once testing is over (amulhern) - Make lvm tests runnable. (amulhern) - Make crypt tests runnable. (amulhern) - Replace unnecessarily complicated expression with string multiplication (amulhern) - Suppress unused variable warning for index in range (amulhern) - Suppress some unused variable warnings. (amulhern) - Suppress some unused variable warnings (amulhern) - Update to the new raise syntax (dshea) - Removed an unnecessary semicolon (dshea) - Removed a redundant definition of NoDisksError (dshea) - Specify regular expressions containing backslashes as raw strings (dshea) - Fixed some questionable indentation (dshea) - Fix logging function string format warnings. (dshea) - All size specifications should be Size instances (#1077163) (vpodzime) - Make sure StorageDevice's self._size is a Size instance (#1077179) (vpodzime) - Allow creating Size instance from another Size instance (vpodzime) - Force removal of hidden devices (#1078163) (amulhern) - Get action_test into working order. (dlehman) - Update action_test.py to specify sizes using blivet.size.Size. (dlehman) - Don't corrupt the environment when setting up StorageTestCase. (dlehman) - Make minSize, maxSize consistent and correct. (dlehman) - Don't prevent grow actions on devices with no max size. (dlehman)
2014-03-27 00:32:20 +00:00
/blivet-0.46.tar.gz
- Change labelApp to a more concisely defined abstract property (amulhern) - Change defaultLabel to a more concisely defined abstract property. (amulhern) - Change _labelstrRegex to a more concisely defined abstract property. (amulhern) - Make reads property a bit more succinct. (amulhern) - Make name an abstract property and omit _name (amulhern) - Remove an unused import from devicelibs/raid.py (vpodzime) - Fix all pylint errors in pylintcodediff (amulhern) - Don't run test if the git branch is dirty (amulhern) - Exit if the specified log file does not exist. (amulhern) - Update lvm devicelibs tests to reflect recent changes. (dlehman) - Add required LVs as needed instead of trying to sort by attrs. (dlehman) - Fix missed conversion of rm->missing in vgreduce call. (dlehman) - Only gather lvm information one time per DeviceTree.populate call. (dlehman) - Add support for listing everything to pvinfo and lvs. (dlehman) - Get lv list from lvm in a more straightforward format. (dlehman) - Gather lv list where we use it to save from having to stash it. (dlehman) - Split out common lvm parsing code. (dlehman) - Add tests that use ParentList as part of Device. (dlehman) - Parent list length doesn't reflect new member in _addParent. (dlehman) - Rearrange _startEdd to be a little more obvious. (amulhern) - Raise exceptions using the new syntax (amulhern) - Do not import logging twice. (amulhern) - Suppress unused variable warning (amulhern) - Get rid of writeRandomUUID. (amulhern) - Remove unused variable but retain call for its side-effects (amulhern) - Put docstring in class (amulhern) - Remove appendiceal assignment (amulhern) - Keep first parameter "self" (amulhern) - Omit compile flag (amulhern) - Move lines beneath __main__ into a main method (amulhern) - Indent with spaces, not tabs (amulhern) - Change param default [] to None and convert in method (amulhern) - Change to a semantically equivalent version of FileDevice.path (amulhern) - Adapt existing tests to changed signature of some methods (amulhern) - Don't assign return value to unused variable (amulhern) - Be specific when catching exceptions (dshea) - Remove appendiceal assignments (amulhern) - Remove a lot of unused variables extracted from udev info (amulhern) - Don't get return values from communicate() if they are ignored (amulhern) - Use the disk's name in log message (amulhern) - Get rid of old exception unpacking syntax (dshea) - Rearranged some iffy exception checking (dshea) - Replace with a semantically equivalent chunk. (amulhern) - Remove some unused exception names. (amulhern) - Remove unused assignment to boot. (amulhern) - Delete method-local pruneFile function. (amulhern) - Don't comment out function headers but leave their bodies uncommented (amulhern) - Get rid of unnecessary pass statements (amulhern) - Put a field and a method in the base class (amulhern) - Spell parameter self correctly (amulhern) - Give abstract method the same signature as its overriding methods. (amulhern) - Catch correct error and disable warning. (amulhern)
2014-04-02 23:27:16 +00:00
/blivet-0.47.tar.gz
2014-04-11 00:17:18 +00:00
/blivet-0.48.tar.gz
/blivet-0.49.tar.gz
- Don't apply action until after all checks have passed. (dlehman) - Apply action for extended partition creation. (dlehman) - Fix an issue introduced in commit a210eb5c. (dlehman) - Move changes from action ctors into apply methods. (dlehman) - Tell lvm to prefer /dev/mapper/ and /dev/md/ to dm-X and mdX nodes. (dlehman) - Use the right md UUID when trying to look one up from addUdevDevice. (dlehman) - Pass UUID of existing md array to superclass constructor. (dlehman) - Fix accounting related to addition of md member devices. (dlehman) - Add some more tests for the Size.humanReadable method (vpodzime) - If size is an integer value, show it as an integer value (vpodzime) - Make sure that using just k/m/g/... results in KiB/MiB/GiB/... (vpodzime) - Make humanReadable size use binary prefixes and nicer units (vpodzime) - Round sizes in humanReadable instead of flooring them (vpodzime) - Do not assign result of evaluating EddTestFS() to a variable (amulhern) - Rename bits() to numBits() (amulhern) - Rename to avoid conflict with name in outer scope. (amulhern) - Put module level code in a method (amulhern) - Do not use strip() incorrectly (amulhern) - Disable E1101 (no-member) error (amulhern) - Use isResize in isShrink and isGrow. (amulhern) - Suppress W0612 (unused-variable) false positives (amulhern) - Suppress W0621 warnings (amulhern) - Add a stub function for get_bootloader (amulhern) - Suppress W0602 false positives (amulhern) - Remove BootLoaderError definitions (amulhern) - Disable E1003 warning. (amulhern) - Do not cache the DeviceFormat object (amulhern) - Suppress W0201 error where attribute is set in __new__. (amulhern) - Add to false positives an error which is not suppressed by a pragma. (amulhern) - Suppress W0201 errors (amulhern) - Make signature of Size.__str__ match signature of Decimal.__str__ (amulhern) - Do not evaluate % operator in log message arguments (amulhern) - Remove suite() methods in tests (amulhern) - Remove addKeyFromFile() method (amulhern) - Import name 'deviceaction' where needed (amulhern) - Setting variables in __init__ (amulhern) - Log exception information and disable W0703 warning. (amulhern) - Disable some W0703 warnings (amulhern) - Disable some W0703 warnings. (amulhern) - Add a function that logs available exception info. (amulhern) - Restrict scope of pylint pragmas as much as possible (amulhern) - Change all pylint numeric codes to mnemonic strings. (amulhern)
2014-04-25 00:04:31 +00:00
/blivet-0.50.tar.gz
- Adjust the available size on each disk using chunk size. (amulhern) - Removed some now unused methods from devices (#1085474) (amulhern) - Rename size() method to get_size() method. (amulhern) - Remove unused get_size method (#1085474) (amulhern) - Use raid.size method to get size of device (#1085474) (amulhern) - Add a size() method to the raid classes (#1085474) (amulhern) - Move line that might throw an MDRaid exception inside try block (#1085474) (amulhern) - Check whether type is mdbiosraidarray before checking smallest member (#1085474) (amulhern) - Log if there was a failure to calculate the size of the MDRaidArrayDevice (#1085474) (amulhern) - Rename get_raw_array_size to get_net_array_size (#1085474) (amulhern) - Rename _get_size to _trim, which describes its function better (#1085474) (amulhern) - Improve comments on a few methods (#1085474) (amulhern) - Make RAIDLevels iterable (#1085474) (amulhern) - Update makebumpver for python-bugzilla 1.0.0 (bcl) - Disable unused argument warning for 'key_file' in devicelibs.crypto methods (amulhern) - Disable unused argument warning for 'del_passphrase' in luks_remove_key (amulhern) - Disable unused argument warning for 'data' in doAutoPartition (amulhern) - Disable unused argument warning for 'info' in handleUdevLuksFormat (amulhern) - Disable unused argument warning for 'disks' in get_pv_space. (amulhern) - Remove pointless parameters from unittest methods. (amulhern) - Disable a no member warning for EddTestFS initializer. (amulhern) - Get rid of unused argument 'args' in MakeBumpVer constructors (amulhern) - Changes to _parseOneLine() and its single invocation. (amulhern) - Remove obsolete comment (amulhern) - Rename to avoid redefining parameter built-ins (amulhern) - Change name to avoid redefining built-in (amulhern) - Remove unused parameter in makeupdates. (amulhern) - Removed unused argument 'options' from testMount (amulhern) - Make signature of _setSize match that of the method it overrrides. (amulhern) - Actually use argv parameter (amulhern) - Pass fname as first argument to shutil.copy2 (amulhern) - Remove minimumSector method and _minimumSector attribute (amulhern) - Disable not-callable pylint warning. (amulhern) - Set child_factory_fstype to None in DeviceFactory (amulhern) - Suppress unpacking-non-sequence pylint warning (amulhern) - Prefix name with defining package (amulhern) - Update Platform instance from flags instead of replacing it. (#1090646) (dlehman) - Rename to avoid redefining built-ins where the redefinition is method local. (amulhern) - Set device.format in else block of try/except/else. (amulhern) - Do not run pylint on sphinx generated conf.py (amulhern) - Get rid of a redefined builtin while simplifying method. (amulhern) - Compress loop into generator list comprehension (amulhern) - Rewrite resize() method to depend on _resizable. (amulhern) - Remove definition of LVMThinLogicalVolumeDevice._resizable (amulhern) - Add an attribute docstring for _resizable. (amulhern) - Correct comment on resizable property (amulhern)
2014-05-05 23:24:03 +00:00
/blivet-0.51.tar.gz
- Split ROOT_PATH usage into getTargetPhysicalRoot()/getSysroot() (walters) - Update and fix copyright info for docs. (dlehman) - Add some tests for extended partition management. (dlehman) - Add some tests that verify the results of DeviceTree.populate. (dlehman) - Add a base class for tests backed by disk image storage. (dlehman) - Adapt examples to examples/common.py function dispersement. (dlehman) - Change devices.SparseFileDevice._create to use util.create_sparse_file. (dlehman) - Move set_up_logging and create_sparse_file into blivet.util for reuse. (dlehman) - Make examples.common.tear_down_disk_images a DeviceTree method. (dlehman) - Fix handling of devices activated as a side-effect of actions. (dlehman) - Check for problematic active devices before processing any actions. (dlehman) - Split some large blocks out of DeviceTree.processActions. (dlehman) - Explicitly requested extended partitions already have an action. (dlehman) - Fix handling of extended partitions across various modes of operation. (dlehman) - Handle the case of md arrays getting activated from outside blivet. (dlehman) - Make an extra effort to remove dm partition nodes that want to stay. (dlehman) - Fix handling of clearing a partitioned disk and leaving it cleared. (dlehman) - Don't check for disklabels on partitions. (dlehman) - Update targetSize to reflect actual size after a device is created. (dlehman) - Remove redundant msecs from logging timestamp. (dlehman) - Make signature of Size.__new__ match signature of Decimal.__new__ (amulhern) - Change Size so that it takes a single value parameter. (amulhern) - Change all 'format' keyword args to 'fmt' in Device constructors (amulhern) - Change format keyword argument to fmt in scheduleCreateFormat (amulhern) - Change keyword parameters in devicetree.findActions (amulhern) - Change ActionCreateFormat constructor keyword argument to 'fmt' (amulhern) - Remove unused parameter 'ignoreErrors' from umountFilesystems() (amulhern) - Remove parameter 'raiseErrors' from mountFilesystems() methods. (amulhern) - Disable unused argument warning for 'major' and 'minor' (amulhern) - Set dummy functions as values rather than via function definition syntax. (amulhern) - Pass size value to superconstructor for LVMVolumeGroupDevice. (amulhern) - Sort the pylint-false-positives file (amulhern) - Do not disable unused argument warning. (amulhern) - Omit pylint warning about disabled warnings or errors from pylint log. (amulhern) - Put the pyblock warning in pylint-false-positives (amulhern) - Remove obsolete documentation for parameter 'label'. (amulhern)
2014-05-09 00:31:58 +00:00
/blivet-0.52.tar.gz
- Remove extra quotes from the xfs_db arguments. (dshea) - Factor duplicate code in __deepcopy__ methods into one method (#1095244) (amulhern) - Rearrange code related to handleUdevDeviceFormat() (#1095329) (amulhern) - Make dumpState catch and log all AttributeErrors (#1095329) (amulhern) - Add sectorSize property to catch and handle missing partedDevice (#1095329) (amulhern) - Get rid of remaining uses of spec keyword for Size() in examples directory. (amulhern) - Generalize false positive regular expression for multiple pylint versions (amulhern) - Do not run some tests unless running on Jenkins. (amulhern) - Miscellaneous pylint fixes. (amulhern) - Globally disable pointless string statement warning (amulhern) - Disable unused argument warning for 'args' in TmpFSDevice constructor (amulhern) - Omit 'args' parameter from formats constructors (amulhern) - Disabled unused argument warning for kwargs in formats.destroy() (amulhern) - Omit *args from parameters for format.create() and formats.destroy() (amulhern) - Omit *args from parameters in formats.setup() (amulhern) - Make formats.teardown() not take any extra parameters. (amulhern) - Make formats.mount use explicit keywords instead of kwargs. (amulhern) - Remove non-self params from FS.doResize method (amulhern) - Make doFormat use regular style keyword parameters (amulhern) - Do not use *args, **kwargs idiom in scheduleCreateFormat. (amulhern) - Do not use *args, **kwargs idiom in various schedule* auxiliary test methods. (amulhern) - Remove upgrading param from turnOnSwap() (amulhern) - Disable unused-argument warning (amulhern) - Disable pylint unused-argument warning. (amulhern)
2014-05-20 23:49:43 +00:00
/blivet-0.53.tar.gz
/blivet-0.54.tar.gz
- IPSeriesPPC now supports GPT in Open Firmware (hamzy) - Fix device name validation for devices that can contain / (#1103751) (dshea) - Add a getRaidLevel() convenience method to raid.py (amulhern) - Make a StorageDevice.raw_device property and use it where appropriate (amulhern) - Simplify a small chunk of Blivet.updateKSData() (amulhern) - Move the code for getting a space requirement from devicefactory to raid. (amulhern) - Make all devicefactory classes uses RAID objects instead of strings. (amulhern) - Remove devicefactory.get_raid_level from blivet (amulhern) - Put get_supported_raid_levels in devicefactory.py (amulhern) - Make BTRFS devices use RAID objects instead of strings for levels (amulhern) - Add lists of supported RAID levels for btrfs and lvm (amulhern) - Add "linear" to mdraid's list of supported raid levels. (amulhern) - Remove getRaidLevel() from mdraid file and make RAID_levels public (amulhern) - Check for required methods in MDRaidLevels.isRaidLevel. (amulhern) - Use has_redundancy property to decide how to add a member to an array. (amulhern) - Update the mdraid.mdadd comments (amulhern) - Use has_redundancy raid property when checking whether a device is removable (amulhern) - Make createBitmap() a property and update tests appropriately. (amulhern) - Add a Dup class to the various descendants of RAIDLevel. (amulhern) - Add an is_uniform property to the RAID levels. (amulhern) - Add a has_redundancy method that returns True if there is actual redundancy (amulhern) - Add Linear and Single to the RAID classes. (amulhern) - Move Container class to raid package and tidy it up (amulhern) - Allow the RAID object itself to be a valid RAID descriptor for lookup. (amulhern) - Adjust RaidLevel hierarchy so that all raid level objects extend RAIDLevel (amulhern) - No longer use _standard_levels as the default set of RAID levels. (amulhern) - Extract selection of members in complete() into a separate method. (amulhern) - Remove DMRaidArrayDevice.members property. (amulhern) - Comment mdraid.mdcreate() and update tests appropriately. (amulhern) - Import name 'lvm' instead of names from lvm package. (amulhern) Please enter the commit message for your changes. Lines starting
2014-06-06 08:28:31 +00:00
/blivet-0.55.tar.gz
/blivet-0.56.tar.gz
/blivet-0.57.tar.gz
/blivet-0.58.tar.gz
/blivet-0.59.tar.gz
/blivet-0.60.tar.gz
- Fix conf.py version bumping (bcl) - Add some tests for Chunk and Request class hierarchy. (dlehman) - Honor the skip list when allocating leftover sectors. (dlehman) - A Chunk is done growing when its pool is empty. (dlehman) - Don't use integer division to calculate a fraction. (dlehman) - Bump version in sphinx config from scripts/makebumpver. (dlehman) - Remove spec= from Size usage in intro.rst. (dlehman) - Attempt to reset the uuid of the mdraid member device (#1070095) (amulhern) - Add new method udev.device_get_md_device_uuid() method (#1070095) (amulhern) - Canonicalize mdadm generated UUIDS (#1070095) (amulhern) - Add a udev.device_get_md_metadata() method to udev and use it. (amulhern) - Change use of METADATA to MD_METADATA. (amulhern) - Check for md_level of None (amulhern) - Do not convert the result of udev.device_get_md_devices() to int. (amulhern) - Add documentation to udev.device_get_md_*() methods. (amulhern) - Document udev.device_get_uuid() method. (amulhern) - Add a few small tests for mdexamine (amulhern) - Add test for raid level descriptor None. (amulhern) - Use context manager with assertRaises*() tests. (amulhern) - Change uuid parameter to array_uuid (amulhern) - Remove udev_ prefix from udev methods. (amulhern) - Remove all references to DeviceFormat.majorminor (amulhern) - Use add_metaclass instead of with_metaclass. (amulhern) - Disable redefined-builtin warning. (amulhern) - Use range instead of xrange in generateBackupPassphrase() (amulhern) - Add a simple test of generateBackupPassphrase() result format (amulhern) - Python3 compatibility (rkuska) - Replace python-setuptools-devel BR with python-setuptools (bcl)
2014-07-12 01:08:20 +00:00
/blivet-0.61.tar.gz
- Mock pyudev since libudev will not be on the builders. (dlehman) - Update selinux tests for default context of mounts under /tmp. (dlehman) - Clean up mocking done by udev tests when finished. (dlehman) - Remove unused lvm and md activation code. (dlehman) - Bypass size getter when mocking new devices. (dlehman) - Simplify udev.device_get_uuid. (dlehman) - Don't pass md array UUID as member format UUID. (dlehman) - Update md name when lookup relied on UUID. (dlehman) - Remove an obsolete block related to unpredictable md device names. (dlehman) - Get md member and array UUIDs for format ctor from udev. (dlehman) - Look in udev data for md member UUID. (dlehman) - Remove some unused multipath-specific functions from blivet.udev. (dlehman) - Adapt multipath detection code to external pyudev module. (dlehman) - Keep lvm and md metadata separate from udev info. (dlehman) - Replace our pyudev with the package python-pyudev. (dlehman) - Add a bunch of tests for mdadd. (amulhern) - Make has_redundancy() a method rather than a property and revise mdadd. (amulhern) - Omit unnecessary class hierarchy related boilerplate. (amulhern) - Add a test for activation. (amulhern) - Add a test for mddetail on containers. (amulhern) - Still attempt to destroy even if remove failed. (amulhern) - Use long messages for unittest errors. (amulhern) - Fix mdnominate error message. (amulhern) - Cosmetic changes for the swapSuggestion function (vpodzime) - Break once metadata value is found. (amulhern) - Fix issues reported by pyflakes (vpodzime) - Remove tests for the sanityCheck (vpodzime) - Move _verifyLUKSDevicesHaveKey and its exception to anaconda (vpodzime) - Remove sanityCheck functions from blivet sources (vpodzime) - Remove an unused closure function (vpodzime) - Remove two methods that are never called (vpodzime) - Add some tests for blivet.partitioning.addPartition. (dlehman) - Add a couple of tests for blivet.partitioning.DiskChunk. (dlehman) - Add a DiskFile class for testing partitioning code as a non-root user. (dlehman) - Add a contextmanager to create and remove sparse tempfiles. (dlehman) - Fix sphinx formatting of code blocks in devicefactory docstrings. (dlehman) - Mock selinux when building docs. (dlehman) - Include doc files when installing on readthedocs. (dlehman) - _maxLabelChars is no longer used by anything (bcl) - tests: Add tests for HFSPlus labels (#821201) (bcl) - Write a fs label for HFS+ ESP (#821201) (bcl) - Mock non-standard modules so we can generate API docs on readthedocs. (dlehman) - Split mdadd into separate functions. (amulhern) - Refactor mdraid tests. (amulhern) - Add a method to extract information about an mdraid array (amulhern) - Extend mdadm() to capture output (amulhern) - Be more robust in the face of possible changes to mdadm's UUIDs. (amulhern) - Factor canonicalize_UUID() into separate method. (amulhern) - Add a docstring to mdraid.mdexamine (amulhern) - Remove DeviceFormat.probe() method (amulhern) - Remove all references to mdMinor in current code base. (amulhern) - Generalize the error message for the array level (amulhern) - Use super() instead of explicit parent name (amulhern) - Remove commented out import. (amulhern) - Make docstring more precise. (amulhern) - Minor fix of a docstring. (rvykydal) - Get rid of partedFlags field. (amulhern)
2014-08-29 02:54:32 +00:00
/blivet-0.62.tar.gz
/blivet-0.63.tar.gz
- Fix pylint errors from recent btrfs commits. (dlehman) - Only cancel actions on disks related to the one we are hiding. (dlehman) - Cancel actions before hiding descendent devices. (dlehman) - Improve handling of device removals/additions from the devicetree. (dlehman) - The first format destroy action should obsolete any others. (dlehman) - Do not allow modification or removal of protected devices. (dlehman) - Propagate mount options for btrfs members to all volumes/subvolumes. (dlehman) - Properly identify dm devices even when udev info is incomplete. (dlehman) - Do not mount btrfs to list subvolumes outside installer_mode. (dlehman) - Reset default subvolume prior to removing the default subvolume. (dlehman) - Increase max size for btrfs to 16 EiB. (#1114435) (dlehman) - Improve adjustment for removal of a subvol in BTRFSFactory. (dlehman) - Set dummy mountpoint in ksdata for lvm thin pools. (dlehman) - Add an epoch to blivet. (sbueno+anaconda) - Check if device has enough members when setting RAID level (#1019685) (amulhern) - Add BTRFSValueError error and use in btrfs related code (#1019685) (amulhern) - iscsi: mount partitions in initramfs for root on iscsi (#740106) (rvykydal) - Remove poolMetaData (#1021505) (amulhern) - Revert "Allow use of a single path if multipath activation fails. (#1054806)" (vpodzime) - Add a release make target (bcl) - Prefer ID_SERIAL over ID_SERIAL_SHORT (#1138254) (vpodzime) - Allow use of a single path if multipath activation fails. (#1054806) (dlehman)
2014-09-20 00:23:39 +00:00
/blivet-0.64.tar.gz
2014-09-30 23:56:57 +00:00
/blivet-0.65.tar.gz
/blivet-0.66.tar.gz
/blivet-0.67.tar.gz
/blivet-0.68.tar.gz
/blivet-0.69.tar.gz
/blivet-0.70.tar.gz
- Remove redundant import. (amulhern) - Change inclusion to equality. (amulhern) - Round filesystem target size to whole resize tool units. (#1163410) (dlehman) - New method to round a Size to a whole number of a specified unit. (dlehman) - Fix units for fs min size padding. (dlehman) - Disable resize operations on filesystems whose current size is unknown. (dlehman) - Run fsck before obtaining minimum filesystem size. (#1162215) (dlehman) - Fix setupDiskImages when the devices are already in the tree. (dlehman) - Make logging a little less verbose and more useful in FS.mount() (amulhern) - Make selinux test less precise. (amulhern) - Do not translate empty strings, gettext translates them into system information (vtrefny) - Add a tearDown method to StorageTestCase. (dlehman) - Remove pointless assignment to _formattable in Iso9660FS. (amulhern) - Remove BTRFS._resizeArgs() (amulhern) - Add more arguments to mpathconf (#1154347) (dshea) - Check the minimum member size for BtrfsVolumeDevices. (amulhern) - Get rid of FS._getRandomUUID() method. (amulhern) - Eliminate TmpFS.minSize() (amulhern) - Don't run selinux context tests when selinux is disabled. (dlehman) - Temporarily disable a test that isn't working. (dlehman) - Pass a path (not a name) to devicePathToName. (dlehman) - devicePathToName should default to returning a basename. (dlehman) - Fix test that guards forcible removal of dm partition nodes. (dlehman) - Device status can never be True for non-existent devices. (#1156058) (dlehman) - Use super to get much-needed MRO magic in constructor. (#1158968) (dlehman)
2014-11-22 01:32:45 +00:00
/blivet-0.71.tar.gz
/blivet-0.72.tar.gz
/blivet-0.73.tar.gz
- Use _resizefsUnit in resizeArgs() method implementations. (amulhern) - Do not supply a default implementation for the resizeArgs() method. (amulhern) - Use convertTo in humanReadable(). (amulhern) - Change convertTo() and roundToNearest() so each takes a units specifier. (amulhern) - Do not even pretend that ReiserFS is resizable. (amulhern) - Get whole unit tuple in loop when searching for correct units. (amulhern) - Make _parseUnits() return a unit constant, rather than a number. (amulhern) - Add unitStr() method. (amulhern) - Make _Prefix entries named constants. (amulhern) - Hoist _BINARY_FACTOR * min_value calculation out of loop. (amulhern) - Comment _prefixTestHelper() and eliminate some redundancies. (amulhern) - Eliminate redundant test. (amulhern) - Avoid using Size constant in FileDevice._create(). (amulhern) - Do not compare the same two values twice. (amulhern) - Make possiblePhysicalExtents() a bit more direct. (amulhern) - Get rid of unnecessary use of long. (amulhern) - Use _netdev mount option as needed. (#1166509) (dlehman) - Don't crash when a free region is too small for an aligned partition. (dlehman) - Multiple loops shouldn't be fatal (#980510) (bcl) - If allowing degraded array, attempt to start it (#1090009) (amulhern) - Add a method that looks at DEVNAME (#1090009) (amulhern) - Add mdrun method to just start, not assemble, an array. (#1090009) (amulhern) - Change allow_degraded_mdraid flag to allow_imperfect_devices (#1090009) (amulhern) - Remove needsFSCheck() and what only it depends on. (amulhern) - Remove allowDirty parameter and code that depends on it. (amulhern) - Eliminate dirtyCB parameter from mountExistingSystem() params. (amulhern) - Use correct package for FSError. (amulhern)
2015-01-10 01:12:08 +00:00
/blivet-0.74.tar.gz
/blivet-0.75.tar.gz
- Revert "Switch to temporary transifex project" (bcl) - Check parent/container type for thin volumes and normal volumes. (dlehman) - drop useless entries from formatByDefault exceptlist (awilliam) - Fix import of devicelibs.raid in platform.py (vpodzime) - Use %license in python-blivet.spec (bcl) - Fix import of FALLBACK_DEFAULT_PART_SIZE (vpodzime) - Make implicit partitions smaller if real requests don't fit anywhere (vpodzime) - Use list comprehension instead of filter+lambda in makebumpver (amulhern) - Revert "Try to deactivate lvm on corrupted gpt disks." (dlehman) - Virtualize options property methods in DeviceFormat.options definition. (amulhern) - Do not redefine size property in TmpFS. (amulhern) - Do not set self.exists to True in TmpFS.__init__(). (amulhern) - Simplify NoDevFS.type. (amulhern) - Set format's mountpoint if it has the mountpoint attribute. (amulhern) - Do not bother to set device.format.mountopts. (amulhern) - Tighten up FS.mountable(). (amulhern) - Simplify FS._getOptions(). (amulhern) - Simplify setting options variable. (amulhern) - Be less eager about processing all lines in /proc/meminfo. (amulhern) - Make error message more useful. (amulhern) - Add a tiny test for TmpFS. (amulhern) - More fixes for alignment-related partition allocation failures. (dlehman) - Do not mix stdout and stderr when running utilities unless requested (vpodzime) - Define the _device, _label and _options attributes in constructor (vpodzime) - Get rid of the has_lvm function (vpodzime) - Do not create lambda over and over in a cycle (vpodzime) - Disable pylint check for cached LVM data in more places (vpodzime) - Fix issue where too many mpath luns crashes installer (#1181336) (rmarshall) - Allow user-specified values for data alignment of new lvm pvs. (#1178705) (dlehman) - Let LVM determine alignment for PV data areas. (#962961) (dlehman) - Raise UnusableConfigurationError when unusable configuration is detected. (dlehman) - Don't raise an exception for failure to scan an ignored disk. (dlehman) - Try to deactivate lvm on corrupted gpt disks. (dlehman) - Remove an unused and outdated constant (vpodzime) - Relax the blivet device name requirements (#1183061) (dshea)
2015-02-07 02:17:13 +00:00
/blivet-0.76.tar.gz
/blivet-1.0.tar.gz
- Add scratch, scratch-bumpver and rc-release targets. (bcl) - Add --newrelease to makebumpver (bcl) - Add po-empty make target (bcl) - Revive the mountExistingSystem() function and all it needs (vpodzime) - Switch translations to use Zanata (bcl) - Set EFIFS._check to True so that it gets correct fspassno (#1077917) (amulhern) - Use format string and arguments for logging function (vpodzime) - Merge pull request #28 from vpodzime/master-libblockdev (vratislav.podzimek) - Do not restrict MDRaidArrayDevice's memberDevices to type int (vpodzime) - Adapt better to libblockdev's md_examine data (vpodzime) - Set TmpFS._resizable to False. (amulhern) - Add an additional test for TmpFS. (amulhern) - Override NoDevFS.notifyKernel() so that it does nothing. (amulhern) - Add TmpFS._resizefsUnit and use appropriately. (amulhern) - Rewrite TmpFS class definition. (amulhern) - Add TmpFS._getExistingSize() method. (amulhern) - Make _getExistingSize() method more generally useful. (amulhern) - Remove _getExistingSize() methods with body pass. (amulhern) - Tidy up the definition of the device property throughout formats package. (amulhern) - Add a test to check properties of device paths assigned to formats. (amulhern) - Set TmpFSDevice object's _formatImmutable attribute to True. (amulhern) - Remove no longer needed requires (vpodzime) - Filter out pylint's "No name 'GLib' in module 'gi.repository'" messages (vpodzime) - Add a static method providing list of available PE sizes (vpodzime) - Use BlockDev's crypto plugin to do LUKS escrow (vpodzime) - Use BlockDev's DM plugin to work with DM RAID sets (vpodzime) - Use BlockDev's DM plugin for DM map existence testing (vpodzime) - Remove tests for the removed devicelibs functions (vpodzime) - Set and refresh BlockDev's global LVM config if needed (vpodzime) - Use BlockDev's LVM plugin instead of devicelibs/lvm.py (vpodzime) - Use BlockDev's BTRFS plugin instead of devicelibs/btrfs.py (vpodzime) - Use the BlockDev's DM plugin instead of devicelibs/dm.py (vpodzime) - Use BlockDev's crypto plugin instead of devicelibs/crypto.py (vpodzime) - Use BlockDev's loop plugin instead of devicelibs/loop.py (vpodzime) - Use BlockDev's MD plugin instead of devicelibs/mdraid.py (vpodzime) - Use BlockDev's swap plugin instead of devicelibs/swap.py (vpodzime) - Use BlockDev's mpath plugin instead of devicelibs/mpath.py (vpodzime) - First little step towards libblockdev (vpodzime) - Move the Blivet class into its own module (vpodzime) - Use a safer method to get a dm partition's disk name. (dlehman) - Be more careful about overwriting device.originalFormat. (#1192004) (dlehman)
2015-03-07 02:02:21 +00:00
/blivet-1.1.tar.gz
- Fix pylint unused variable warnings (vtrefny) - Add test for mountpoints (vtrefny) - Replace _mountpoint with systemMountpoint in other modules (vtrefny) - New method to handle nodev filesystems (vtrefny) - Add dynamic mountpoint detection support (vtrefny) - New method to compute md5 hash of file (vtrefny) - Add information about subvolume to BTRFS format (vtrefny) - Don't specify priority in fstab if -1 (default) is used (#1203709) (vpodzime) - Catch GLib.GError in places where we catch StorageError (#1202505) (vpodzime) - slave_dev is undefined here, use slave_devices[0] instead. (clumens) - Clean out the mock chroot before attempting to run the rest of the test. (clumens) - Move recursiveRemove from Blivet to DeviceTree. (dlehman) - Factor out adding of sysfs slave (parent) devices into its own method. (dlehman) - Add a __str__ method to DeviceTree. (dlehman) - Allow changing the names of existing devices. (dlehman) - Remove redundant block for adding fwraid member disks. (dlehman) - Return a device from addUdevLVDevice if possible. (dlehman) - Pass a sysfs path to MultipathDevice constructor from Populator. (dlehman) - Resolve md names in udev info. (dlehman) - LVMVolumeGroupDevice format should be marked as immutable. (dlehman) - Don't catch and re-raise device create exceptions as DeviceCreateError. (dlehman) - Call superclass _preCreate from BTRFSVolumeDevice._preCreate. (dlehman) - Move code that populates the device tree into a new class and module. (dlehman) - Move action list management into a separate class and module. (dlehman) - Put an __init__.py in devices_tests directory. (amulhern) - Require the Python 2 version of pykickstart (#1202255) (vpodzime) - Use Size method to perform a Size operation (#1200812) (amulhern) - Extend Size.roundToNearest to allow Size units (#1200812) (amulhern) - Move code that populates the device tree into a new class and module. (dlehman) - Move action list management into a separate class and module. (dlehman) - Remove a pointless override. (amulhern) - Display the name of the overridden ancestor in error message. (amulhern) - Check for simple function calls in pointless overrides. (amulhern) - Simplify supported methods in FS.py. (amulhern) - Make hidden property use superclass method where possible. (amulhern) - Simplify some methods in DeviceFormat class. (amulhern) - Do supercall in BTRFSVolumeDevice.formatImmutable. (amulhern) - Add a comment to supported property. (amulhern) - Get rid of some very old commented out code. (amulhern) - Put all mock results into the top-level source dir. (clumens) - Spell TestCase.teardown correctly as tearDown(). (amulhern) - Make testMount() check return value of util.mount(). (amulhern) - Remove unused fs_configs. (amulhern) - Remove side-effects from mountType property. (amulhern) - Do not make the mountpoint directory in fs.FS.mount(). (amulhern) - Mount should not be satisfied with anything less than a directory. (amulhern) - Do not return doFormat() value. (amulhern) - Put previously removed mountExistingSystem() into osinstall.py. (amulhern) - Revert "Revive the mountExistingSystem() function and all it needs" (amulhern) - Make sure the device is setup before formatting it (#1196397) (bcl) - Use %d format string for every value that should be an integer decimal. (amulhern) - Robustify PartitionDevice._wipe() method. (amulhern) - Fix up scientific notation _parseSpec() tests. (amulhern) - Make size._parseSpec a public method. (amulhern) - Simplify StorageDevice.disks. (amulhern) - Simplify StorageDevice.growable. (amulhern) - Simplify and correct StorageDevice.packages property. (amulhern) - Remove services infrastructure from devices and formats. (amulhern) - Split devices tests out into a separate directory. (amulhern) - Fix dd wipe call. (exclusion) - Add a script to rebase and merge pull requests (dshea) - Add pylint false positive to list of pylint false positives. (amulhern) - Change all instances of GLib.Error to GLib.GError. (amulhern) - Sort pylint-false-positives using sort's default options with LC_ALL=C. (amulhern) - Add ability to match scientific notation in strings. (amulhern)
2015-03-28 00:28:13 +00:00
/blivet-1.2.tar.gz
- fix conf.py pylint errors (bcl) - Fix BlockDev import in populator.py (bcl) - Prevent pylint from going crazy because of libblockdev's ErrorProxy (vpodzime) - Make use of the new libblockdev error reporting (vpodzime) - Add libselinux-python to package dependencies (#1211834) (vtrefny) - Introduce a new doReqPartition method that is similar to doAutoPartition. (clumens) - Merge pull request #81 from mulkieran/master-mount-options (mulkieran) - Merge pull request #66 from vpodzime/master-py3_final (martin.kolman) - Encode input for os.write() (mkolman) - Build the python3-blivet subpackage (vpodzime) - Do not modify dict while iterating over its values (vpodzime) - Do not try to compare strings and Nones when sorting mountpoints (vpodzime) - Always return strings from regular capture output run functions (mkolman) - Do not use variable from an inner comprehension in tests (vpodzime) - Implement and test Python 3 division for the Size class (vpodzime) - Replace python 2 build-in-function cmp() with custom method (vtrefny) - Do not rely on __sub__ being implemented as __add__ (-1)* (vpodzime) - Transform our compare functions into key functions and use these instead (vpodzime) - Fix the size_test to stop using byte strings (vpodzime) - Do not define unit strings as byte strings (vpodzime) - Do not pass context to Decimal numeric operations (vpodzime) - Don't call object's (as a class) __new__ with extra arguments (vpodzime) - Make translation to lowerASCII Python[23]-compatible (vpodzime) - Replace __import__ call with importlib.import_module (vpodzime) - In FS._postSetup() check the mountpoint options that were actually used. (amulhern) - Add kwargs to unmount and move mountpoint check into _preSetup (bcl) - Do not try importing hidden/backup files as formats (vpodzime) - Add back DeviceTree's support for saving LUKS passphrases (vpodzime) - Do not try to stat FileDevice's path if it doesn't exist (vpodzime) - Merge pull request #76 from dwlehman/unusable-storage-branch (dlehman) - Add error handling around storageInitialize for unusable setups. (dlehman) - Include suggestions in error classes for unusable storage configurations. (dlehman) - Use partially corrupt gpt disklabels. (dlehman) - Consolidate common code in DeviceFormat class methods. (dlehman) - Update get_mount_paths to use mountsCache (bcl) - Add multiple mountpoint handling to MountsCache (bcl) - Remove obsolete FIXME from FS.status (bcl) - Check to see if mountpoint is already mounted (bcl) - Add isMountpoint to MountsCache (bcl) - Add ability to unmount specific mountpoints (bcl) - Fix pylint errors for six.moves import (vtrefny) - Merge pull request #72 from vojtechtrefny/picklable-size (vpodzime) - Merge pull request #74 from mulkieran/master-trivia (mulkieran) - Fix two instances where check_equal() returned True incorrectly. (amulhern) - Fix typo in 66f2ddb11e85ec6f48535d670dd6f24cb60cbe55. (amulhern) - Make sure installer_mode is reset to original value. (amulhern) - Test for Size pickling support (vtrefny) - Pickling support for Size. (vtrefny) - Disable pylint bad-super-call in MDRaidArrayDevice.updateSize. (dlehman) - Merge pull request #68 from dwlehman/parted-device-branch (dlehman) - Require reallocation after changing an allocated partition's size. (dlehman) - Move mediaPresent out of Device and into StorageDevice. (dlehman) - Don't use parted.Device to obtain size info. (dlehman) - Merge pull request #70 from mulkieran/master-1208536 (mulkieran) - Prepend /sys to sysfs path for udev lookup (#1208536) (amulhern) - Fall back on mdadm info if udev info is missing for the array (#1208536) (amulhern) - Catch DeviceError as well as ValueError (#1208536) (amulhern) - Make an MDContainerDevice if that is the right model (#1208536) (amulhern) - Change raid variable name to raid_items (#1208536) (amulhern) - Fix swapped args to processActions. (dlehman) - Merge pull request #63 from dwlehman/disk-selection-branch (dlehman) - Use VGname-LVname as key for LVinfo cache (vpodzime) - Add back DeviceTree's methods and properties used from the outside (vpodzime) - Wrap keys() with a list so that the dictionary can be changed (martin.kolman) - Add a method to list disks related by lvm/md/btrfs container membership. (dlehman) - Make getDependentDevices work with hidden devices. (dlehman)
2015-04-22 16:41:10 +00:00
/blivet-1.3.tar.gz
- Workaround for chrooted mountpoints (#1217578) (vtrefny) - Merge pull request #116 from mulkieran/master-gerror (mulkieran) - Filter GLib.GError instead of GLib.Error in pylint false positives. (amulhern) - Merge pull request #113 from mulkieran/master-tasks-20150513 (mulkieran) - Guard tests against device support being missing. (amulhern) - Add checks for filesystem availability in selinux tests. (amulhern) - Fix some small mistakes in tests using availability information. (amulhern) - Get rid of abitrary _resizable variable in tests. (amulhern) - Don't use utilsAvailable to skip tests. (amulhern) - Treat a missing plugin as an OK situation. (amulhern) - Use availability information in device actions. (amulhern) - Add a check to determine whether the device type is supported. (amulhern) - If external dependencies are unavailable, cannot support RAID levels. (amulhern) - Add availability information to devicelibs files. (amulhern) - Track external dependencies in devices. (amulhern) - If lvm is not available, do not do the filtering. (amulhern) - Add availability checking to non-FS formats. (amulhern) - Use filesystem tasks in filesystem. (amulhern) - Add filesystem tasks to tasks directory. (amulhern) - Add tasks infrastructure to tasks directory. (amulhern) - Add error to detect errors in discovering availability info. (amulhern) - Add errors about reading and writing labels to error heirarchy. (amulhern) - Make assignments that override abstract properties into simple attributes. (amulhern) - Move kernel_filesystems functionality into a little library. (amulhern) - Make labeling(), relabels(), and labelFormatOK() instance methods. (amulhern) - Merge pull request #108 from vojtechtrefny/progress_callbacks (vtrefny) - Merge pull request #109 from mulkieran/master-btrfs-c (mulkieran) - Set a subvolspec format args when making a new BTRFS volume. (amulhern) - Cache data obtained from /proc/self/mountinfo. (amulhern) - Add progress report callback for action processing (vtrefny) - Do not have two ignored variables when one will do. (amulhern) - Fix a typo in comment. (amulhern) - Do not use type() in makebumpver. (clumens) - Merge pull request #100 from mulkieran/master-lvm-a (mulkieran) - Merge pull request #104 from mulkieran/master-1139222 (mulkieran) - Include LUKSDevice information in kickstart data (#1139222) (amulhern) - Un-escape '-'s in names or paths for _all_ lvm lv or vgs. (amulhern) - Fix a few miscellaneous pylint-caught problems. (clumens) - Only give Size objects a __div__ method under python2. (clumens) - Protect against calling testMount on an object that may not have it. (clumens) - Add a bunch of false positives to make pylint succeed. (clumens) - e.message -> str(e) (clumens) - Disable a pointless override warning. (clumens) - Ignore the environment-modify pylint warnings for size_test.py. (clumens) - blockdevError -> BlockDevError (clumens) - Remove uses of the string module we don't need, ignore warnings on those we do. (clumens) - unicode isn't undefined on the python2 code paths. (clumens) - Use eintr_retry_call from anaconda. (clumens) - Move blivet to using pocketlint. (clumens) - Merge pull request #97 from mulkieran/master-1072060 (mulkieran) - Merge pull request #93 from vojtechtrefny/fix_active_parted (vtrefny) - If the parent volume has a label, use it in subvol's kickstart (#1072060) (amulhern) - Merge pull request #94 from mulkieran/master-raid (mulkieran) - Allow adding new partitions to disks with active devices (#1212841) (vtrefny) - Fix "anaconda hangs while trying to discover iscsi..." (#1166652) (jkonecny) - Move definition of _level attribute above super-constructor call. (amulhern) - Fix status for LVMPhysicalVolume format (vtrefny)
2015-05-18 21:57:04 +00:00
/blivet-1.4.tar.gz
/blivet-1.5.tar.gz
- Fix indentation in action_test.py (dlehman) - Merge pull request #133 from atodorov/fix_deprecation_warnings (mulkieran) - Merge pull request #147 from vojtechtrefny/master_fix_undo_resize (vtrefny) - Fix setting original size for format resize action. (#1225352) (vtrefny) - Make unit test assertion expressions fully Python2/3 compatible. (atodorov) - Merge pull request #151 from mulkieran/master-120 (mulkieran) - Merge pull request #122 from atodorov/remove_doctest (mulkieran) - Parameterize Makefile test targets on Python version. (atodorov) - Merge pull request #148 from mulkieran/master-132 (mulkieran) - Merge pull request #144 from mulkieran/master-128 (mulkieran) - Remove facilities for running tests as standalone modules. (atodorov) - Include automatic and manual test documentation. (atodorov) - Remove an accidental variable assignment in LVMLogicalVolumeDevice (vpodzime) - Merge pull request #143 from mulkieran/master-134 (mulkieran) - Remove two files in tests directory. (atodorov) - Fix typo in docstring. (atodorov) - Merge pull request #112 from vpodzime/master-fixed_maps (vpodzime) - Merge pull request #129 from mulkieran/master-keepers-c (mulkieran) - Merge pull request #135 from mulkieran/master-test-fixes (mulkieran) - Convert bytes value to str. (amulhern) - Change new format lookup name from "msdos" to "disklabel". (amulhern) - Get rid of pointless test case about arguments for labeling apps. (amulhern) - Do not raise KeyError if ID_PART_ENTRY_DISK is missing. (amulhern) - Manage backing store more independently in loop backed test cases. (amulhern) - Pass floats as string to Decimal constructor everywhere. (amulhern) - Fix a bug in reading a size specification with a radix in the numeric part. (amulhern) - remove mention of doctest b/c target was removed in fed53d969af0eddaeeca58cdf3e40916497aa305 (atodorov) - Beware of Python 3's version of the map() built-in function (vpodzime)
2015-06-10 23:52:16 +00:00
/blivet-1.6.tar.gz
- Merge pull request #167 from mulkieran/master-format-copy-b (mulkieran) - Merge pull request #156 from vpodzime/master-lvm_cache_actually (vpodzime) - Add cache support to the LVMLogicalVolumeDevice class (vpodzime) - Copy all DeviceFormat objects using deepcopy. (amulhern) - Make use of FSTask and FSUnimplementedTask in FS* tasks. (amulhern) - Add an abstract parent of all filesystem tasks. (amulhern) - Merge pull request #162 from dwlehman/storage-device-format-type-consistency (dlehman) - Merge pull request #138 from dwlehman/partitionable-md (dlehman) - Document the fact that StorageDevice.format is always a DeviceFormat. (dlehman) - Ignore some interruptible system call warnings (dshea) - Retry interruptible calls (dshea) - Ignore EINTR from os.close instead of retrying the call (dshea) - Add kwargs to eintr_retry_call (dshea) - Specify required version of GI-imported packages (vpodzime) - Add classes for LVM cache related functionality (vpodzime) - Add generic classes for cache and cache stats (vpodzime) - Merge pull request #149 from vpodzime/master-lvm_cache (vpodzime) - Implement the support for resizing internal metadata LVs of thin pools (vpodzime) - Use relations between LVs to determine parent LV (vpodzime) - Make Blivet.lvs return all LVs not just traditional/thick LVs (vpodzime) - Accept both list and ParentList when checking LVs parents (vpodzime) - Create and use internal LVs instead of static values (vpodzime) - Add classes for the internal LVs of various types (vpodzime) - Merge pull request #137 from dwlehman/md-boot-metadata-branch (dlehman) - Treat existing md arrays whose members are all disks like disks. (dlehman) - Handle formatting after adding devices from format handlers. (dlehman) - Merge pull request #158 from mulkieran/master-target-size (mulkieran) - Move parents checking and update into a seprarate methods (vpodzime) - Rearrange and group some of the StorageDevice's methods/properties (vpodzime) - Don't crash when processing cached LVs (vpodzime) - Make roundToNearest() slightly more robust. (amulhern) - Extend Size.convertTo() to work with arbitrary Size() values. (amulhern) - Changes to FS._setTargetSize(). (amulhern) - Increase ext4 maximum size from 16 TiB to 1 EiB (#1231049) (bcl) - Merge pull request #155 from atodorov/fix_issue_154 (mulkieran) - Use len of set to check for duplicates in list of packages. (atodorov) - Merge pull request #153 from mulkieran/master-task-names (mulkieran) - Omit completely pointless setUp method. (amulhern) - Make a size refer to a Size object. (amulhern) - Add __str__ method to various subclasses of Task. (amulhern) - Don't pass unused mountpoint dict to preCommitFixup. (dlehman) - Use the default md metadata version for everything except /boot/efi. (dlehman)
2015-06-27 00:54:43 +00:00
/blivet-1.7.tar.gz
- Add a bunch more gi.require_version calls (dshea) - Merge pull request #170 from dwlehman/size-cleanups (dlehman) - Add unit tests for device size setters and getters. (dlehman) - Only return target size if it is set to something meaningful. (dlehman) - Validate new formats against current device size. (dlehman) - Device size checks do not apply to existing devices. (dlehman) - Make sure subclasses size setters use the base setter as appropriate. (dlehman) - x-initrd.mount should only be set for /var (#1238603) (bcl) - There's a python3 anaconda now, so ditch the temporary false positives. (clumens) - Fix a syntax error caused by my previous commit. (clumens) - Fix a duplicate key caused by patch merging. (clumens) - Add support for specifying arbitrary mkfs options. (clumens) - Align free regions before choosing one. (dlehman) - Align partition sizes earlier in the allocation process. (dlehman) - Don't crash on cleanup with DASDs or iSCSI devices present. (#1166506) (dlehman) - Make check-requires errors more readable. (dshea) - Merge pull request #166 from dwlehman/autopart-snapshot-branch (dlehman) - Default to a string when sorting mountpoints in FSSet.umountFilesystems. (dlehman) - Fix order of arguments to blockdev.thsnapshotcreate. (dlehman) - Snapshot format exists upon snapshot creation. (dlehman) - Improve format handling for lvm snapshots. (dlehman) - Merge pull request #160 from dwlehman/lookup-method-deprecations (dlehman) - Deprecate some little-used devicetree lookup methods. (dlehman) - Add a decorator to mark deprecated functions/methods. (dlehman) - Log python warnings, including DeprecationWarning. (dlehman) - Catch and relay more exception types from the iscsi process (dshea) - Use the pipes as contextmanagers to ensure they are closed (dshea) - Close the unused half of pipes after the fork (dshea)
2015-07-11 00:17:46 +00:00
/blivet-1.8.tar.gz