python-blivet/.gitignore

57 lines
1.1 KiB
Plaintext
Raw Normal View History

2013-01-25 22:49:10 +00:00
/blivet-0.4.tar.gz
Add mountOnly to turnOnFilesystems (bcl) - Update lvm scanning to account for new ignored device handling. (dlehman) - Scan in all devices and then hide those that use ignored disks. (dlehman) - Adjust child counts correctly when unhiding a device. (dlehman) - Generate lvm config args each time they're needed/used. (dlehman) - Add ability to grab 70-anaconda.rules udev data directly. (dlehman) - Add support for active luks mappings at populate time. (dlehman) - Don't require nss, required only for escrow key support. (dlehman) - Update the TODO list. (dlehman) - Add missing constant DMI_CHASSIS_VENDOR. (dlehman) - Allow for multiple calls to DeviceTree.processActions. (#881023,#846573) (dlehman) - Use CGit snaphot URL for Source in specfile. (dlehman) - Streamline some logic in storageInitialize. (dlehman) - Don't re-add deleted or hidden devices during DeviceTree.populate. (dlehman) - Only run findExistingInstallations and start iscsi, &c in installer mode. (dlehman) - Do not change device status during populate in normal mode. (#817064) (dlehman) - Drop old code related to saving clearPartType from pre-f18. (dlehman) - check for skipping bootloader in doIt (bcl) - check for stage1 when not installing bootloader (#882065,#895232) (bcl) - explicitly detect iso9660 on a disk (#903158) (bcl) - Fix several problems in python-blivet.spec. (dlehman) - Remove #!/usr/bin/python from tsort.py (dlehman) - Update COPYING file. (dlehman) - Add a Requires for dmidecode on x86. (dlehman)
2013-02-08 21:14:55 +00:00
/blivet-0.5.tar.gz
/blivet-0.6.tar.gz
/blivet-0.7.tar.gz
2013-03-13 16:01:57 +00:00
/blivet-0.8.tar.gz
/blivet-0.9.tar.gz
2013-04-09 22:01:22 +00:00
/blivet-0.10.tar.gz
2013-04-15 20:37:24 +00:00
/blivet-0.11.tar.gz
2013-05-03 19:56:00 +00:00
/blivet-0.12.tar.gz
/blivet-0.13.tar.gz
2013-05-15 19:10:34 +00:00
/blivet-0.14.tar.gz
/blivet-0.15.tar.gz
/blivet-0.16.tar.gz
/blivet-0.17.tar.gz
/blivet-0.18.tar.gz
/blivet-0.19.tar.gz
/blivet-0.20.tar.gz
/blivet-0.21.tar.gz
/blivet-0.22.tar.gz
/blivet-0.23.tar.gz
/blivet-0.24.tar.gz
/blivet-0.25.tar.gz
/blivet-0.26.tar.gz
/blivet-0.27.tar.gz
/blivet-0.28.tar.gz
/blivet-0.29.tar.gz
/blivet-0.30.tar.gz
/blivet-0.31.tar.gz
/blivet-0.32.tar.gz
/blivet-0.33.tar.gz
/blivet-0.34.tar.gz
- Convert everything to use Size. (dlehman) - Allow negative sizes. (dlehman) - Fix return value of Size.convertTo with a spec of bytes. (dlehman) - Discard partial bytes in Size constructor. (dlehman) - Prefer binary prefixes since everything is really based on them. (dlehman) - Fix a few minor problems introduced by recent raid level changes. (dlehman) - Move label setter and getter into DeviceFormat class (#1038590) (amulhern) - Add a test for labeling swap devices (#1038590) (amulhern) - Default to None to mean none, rather than empty string (#1038590) (amulhern) - Add a labelFormatOK method to the DeviceFormat's interface (#1038590) (amulhern) - Indicate whether the filesystem can label (#1038590) (amulhern) - Restore ability to write an empty label where possible (#1038590) (amulhern) - More tests to check writing and reading labels (#1038590) (amulhern) - Remove fsConfigFromFile (#1038590) (amulhern) - Changes to the handling of filesystem labeling (#1038590) (amulhern) - Add some simple tests for file formats. (amulhern) - Give DeviceFormat objects an id (#1043763) (amulhern) - Refactor to use ObjectID class (#1043763) (amulhern) - Make a class that creates a unique-per-class id for objects (#1043763) (amulhern) - Revert "Make a class that creates a unique-per-class id for objects (#1043763)" (amulhern) - Revert "Give DeviceFormat objects an object_id (#1043763)" (amulhern) - Make the maximum end sector for PReP boot more benevolent (#1029893) (vpodzime) - Give DeviceFormat objects an object_id (#1043763) (amulhern) - Make a class that creates a unique-per-class id for objects (#1043763) (amulhern) - Make get_device_format_class return None if class not found (#1043763) (amulhern) - A few simple unit tests for some formats methods (#1043763) (amulhern) - Don't translate format names (dshea)
2014-01-11 00:17:06 +00:00
/blivet-0.35.tar.gz
/blivet-0.36.tar.gz
- Only do SELinux context resets if in installer mode (#1038146) (amulhern) - Look up SELinux context for lost+found where it is needed (#1038146) (amulhern) - Don't reset the SELinux context before the filesystem is mounted (#1038146) (amulhern) - Test setting selinux context on lost+found (#1038146) (amulhern) - Only retrieve the unit specifier once (dshea) - Fix the Device.id usage. (dshea) - Accept both English and localized sizes in Size specs. (dshea) - Use a namedtuple to store information on unit prefixes (dshea) - Remove en_spec Size parameters. (dshea) - Fix potential traceback in devicetree.populate. (#1055523) (dlehman) - Fall back on relabeling app where available (#1038590) (amulhern) - Change the meaning of label field values (#1038590) (amulhern) - Enable labeling on NTFS filesystem (#1038590) (amulhern) - Enable labeling on HFS filesystem (#1038590) (amulhern) - Add a method that indicates ability to relabel (#1038590) (amulhern) - Use filesystem creation app to set filesystem label (#1038590) (amulhern) - Import errors so FSError name is resolved (#1038590) (amulhern) - Remove BTRFS._getFormatOptions (#1038590) (amulhern) - Make an additional class for labeling abstractions (#1038590) (amulhern) - Fix copyright date (#1038590) (amulhern) - Remove redundant _defaultFormatOptions field (#1038590) (amulhern) - Remove code about unsetting a label (#1038590) (amulhern) - Return None if the filesystem has no label (#1038590) (amulhern) - Removed redundant check for existance of filesystem (#1038590) (amulhern) - Have writeLabel throw a more informative exception (#1038590) (amulhern)
2014-01-23 01:45:02 +00:00
/blivet-0.37.tar.gz
/blivet-0.38.tar.gz
/blivet-0.39.tar.gz
/blivet-0.40.tar.gz
/blivet-0.41.tar.gz
/blivet-0.42.tar.gz
/blivet-0.43.tar.gz
/blivet-0.44.tar.gz
/blivet-0.45.tar.gz
- Adapt callers to use the new parent list interface. (dlehman) - Change management of Device parents to use a simple list interface. (dlehman) - Convert ContainerDevice to an abstract base class. (dlehman) - Set device uuid before calling Device ctor. (dlehman) - Improve the mechanism for VG completeness. (dlehman) - Support mutually-obsoleting actions. (dlehman) - Add some checking to MDRaidArrayDevice._setSpares. (dlehman) - Make sorting by action type part of the action classes. (dlehman) - Add action classes for container member set management. (dlehman) - Add a property to provide consistent access to parent container device. (dlehman) - Add type-specific methods for member set management. (dlehman) - Adapt callers to new method names for add/remove member device. (dlehman) - Add a ContainerDevice class to consolidate member management code. (dlehman) - Add backend functions for container member set management. (dlehman) - Teardown RAID device once testing is over (amulhern) - Make lvm tests runnable. (amulhern) - Make crypt tests runnable. (amulhern) - Replace unnecessarily complicated expression with string multiplication (amulhern) - Suppress unused variable warning for index in range (amulhern) - Suppress some unused variable warnings. (amulhern) - Suppress some unused variable warnings (amulhern) - Update to the new raise syntax (dshea) - Removed an unnecessary semicolon (dshea) - Removed a redundant definition of NoDisksError (dshea) - Specify regular expressions containing backslashes as raw strings (dshea) - Fixed some questionable indentation (dshea) - Fix logging function string format warnings. (dshea) - All size specifications should be Size instances (#1077163) (vpodzime) - Make sure StorageDevice's self._size is a Size instance (#1077179) (vpodzime) - Allow creating Size instance from another Size instance (vpodzime) - Force removal of hidden devices (#1078163) (amulhern) - Get action_test into working order. (dlehman) - Update action_test.py to specify sizes using blivet.size.Size. (dlehman) - Don't corrupt the environment when setting up StorageTestCase. (dlehman) - Make minSize, maxSize consistent and correct. (dlehman) - Don't prevent grow actions on devices with no max size. (dlehman)
2014-03-27 00:32:20 +00:00
/blivet-0.46.tar.gz
- Change labelApp to a more concisely defined abstract property (amulhern) - Change defaultLabel to a more concisely defined abstract property. (amulhern) - Change _labelstrRegex to a more concisely defined abstract property. (amulhern) - Make reads property a bit more succinct. (amulhern) - Make name an abstract property and omit _name (amulhern) - Remove an unused import from devicelibs/raid.py (vpodzime) - Fix all pylint errors in pylintcodediff (amulhern) - Don't run test if the git branch is dirty (amulhern) - Exit if the specified log file does not exist. (amulhern) - Update lvm devicelibs tests to reflect recent changes. (dlehman) - Add required LVs as needed instead of trying to sort by attrs. (dlehman) - Fix missed conversion of rm->missing in vgreduce call. (dlehman) - Only gather lvm information one time per DeviceTree.populate call. (dlehman) - Add support for listing everything to pvinfo and lvs. (dlehman) - Get lv list from lvm in a more straightforward format. (dlehman) - Gather lv list where we use it to save from having to stash it. (dlehman) - Split out common lvm parsing code. (dlehman) - Add tests that use ParentList as part of Device. (dlehman) - Parent list length doesn't reflect new member in _addParent. (dlehman) - Rearrange _startEdd to be a little more obvious. (amulhern) - Raise exceptions using the new syntax (amulhern) - Do not import logging twice. (amulhern) - Suppress unused variable warning (amulhern) - Get rid of writeRandomUUID. (amulhern) - Remove unused variable but retain call for its side-effects (amulhern) - Put docstring in class (amulhern) - Remove appendiceal assignment (amulhern) - Keep first parameter "self" (amulhern) - Omit compile flag (amulhern) - Move lines beneath __main__ into a main method (amulhern) - Indent with spaces, not tabs (amulhern) - Change param default [] to None and convert in method (amulhern) - Change to a semantically equivalent version of FileDevice.path (amulhern) - Adapt existing tests to changed signature of some methods (amulhern) - Don't assign return value to unused variable (amulhern) - Be specific when catching exceptions (dshea) - Remove appendiceal assignments (amulhern) - Remove a lot of unused variables extracted from udev info (amulhern) - Don't get return values from communicate() if they are ignored (amulhern) - Use the disk's name in log message (amulhern) - Get rid of old exception unpacking syntax (dshea) - Rearranged some iffy exception checking (dshea) - Replace with a semantically equivalent chunk. (amulhern) - Remove some unused exception names. (amulhern) - Remove unused assignment to boot. (amulhern) - Delete method-local pruneFile function. (amulhern) - Don't comment out function headers but leave their bodies uncommented (amulhern) - Get rid of unnecessary pass statements (amulhern) - Put a field and a method in the base class (amulhern) - Spell parameter self correctly (amulhern) - Give abstract method the same signature as its overriding methods. (amulhern) - Catch correct error and disable warning. (amulhern)
2014-04-02 23:27:16 +00:00
/blivet-0.47.tar.gz
2014-04-11 00:17:18 +00:00
/blivet-0.48.tar.gz
/blivet-0.49.tar.gz
- Don't apply action until after all checks have passed. (dlehman) - Apply action for extended partition creation. (dlehman) - Fix an issue introduced in commit a210eb5c. (dlehman) - Move changes from action ctors into apply methods. (dlehman) - Tell lvm to prefer /dev/mapper/ and /dev/md/ to dm-X and mdX nodes. (dlehman) - Use the right md UUID when trying to look one up from addUdevDevice. (dlehman) - Pass UUID of existing md array to superclass constructor. (dlehman) - Fix accounting related to addition of md member devices. (dlehman) - Add some more tests for the Size.humanReadable method (vpodzime) - If size is an integer value, show it as an integer value (vpodzime) - Make sure that using just k/m/g/... results in KiB/MiB/GiB/... (vpodzime) - Make humanReadable size use binary prefixes and nicer units (vpodzime) - Round sizes in humanReadable instead of flooring them (vpodzime) - Do not assign result of evaluating EddTestFS() to a variable (amulhern) - Rename bits() to numBits() (amulhern) - Rename to avoid conflict with name in outer scope. (amulhern) - Put module level code in a method (amulhern) - Do not use strip() incorrectly (amulhern) - Disable E1101 (no-member) error (amulhern) - Use isResize in isShrink and isGrow. (amulhern) - Suppress W0612 (unused-variable) false positives (amulhern) - Suppress W0621 warnings (amulhern) - Add a stub function for get_bootloader (amulhern) - Suppress W0602 false positives (amulhern) - Remove BootLoaderError definitions (amulhern) - Disable E1003 warning. (amulhern) - Do not cache the DeviceFormat object (amulhern) - Suppress W0201 error where attribute is set in __new__. (amulhern) - Add to false positives an error which is not suppressed by a pragma. (amulhern) - Suppress W0201 errors (amulhern) - Make signature of Size.__str__ match signature of Decimal.__str__ (amulhern) - Do not evaluate % operator in log message arguments (amulhern) - Remove suite() methods in tests (amulhern) - Remove addKeyFromFile() method (amulhern) - Import name 'deviceaction' where needed (amulhern) - Setting variables in __init__ (amulhern) - Log exception information and disable W0703 warning. (amulhern) - Disable some W0703 warnings (amulhern) - Disable some W0703 warnings. (amulhern) - Add a function that logs available exception info. (amulhern) - Restrict scope of pylint pragmas as much as possible (amulhern) - Change all pylint numeric codes to mnemonic strings. (amulhern)
2014-04-25 00:04:31 +00:00
/blivet-0.50.tar.gz
- Adjust the available size on each disk using chunk size. (amulhern) - Removed some now unused methods from devices (#1085474) (amulhern) - Rename size() method to get_size() method. (amulhern) - Remove unused get_size method (#1085474) (amulhern) - Use raid.size method to get size of device (#1085474) (amulhern) - Add a size() method to the raid classes (#1085474) (amulhern) - Move line that might throw an MDRaid exception inside try block (#1085474) (amulhern) - Check whether type is mdbiosraidarray before checking smallest member (#1085474) (amulhern) - Log if there was a failure to calculate the size of the MDRaidArrayDevice (#1085474) (amulhern) - Rename get_raw_array_size to get_net_array_size (#1085474) (amulhern) - Rename _get_size to _trim, which describes its function better (#1085474) (amulhern) - Improve comments on a few methods (#1085474) (amulhern) - Make RAIDLevels iterable (#1085474) (amulhern) - Update makebumpver for python-bugzilla 1.0.0 (bcl) - Disable unused argument warning for 'key_file' in devicelibs.crypto methods (amulhern) - Disable unused argument warning for 'del_passphrase' in luks_remove_key (amulhern) - Disable unused argument warning for 'data' in doAutoPartition (amulhern) - Disable unused argument warning for 'info' in handleUdevLuksFormat (amulhern) - Disable unused argument warning for 'disks' in get_pv_space. (amulhern) - Remove pointless parameters from unittest methods. (amulhern) - Disable a no member warning for EddTestFS initializer. (amulhern) - Get rid of unused argument 'args' in MakeBumpVer constructors (amulhern) - Changes to _parseOneLine() and its single invocation. (amulhern) - Remove obsolete comment (amulhern) - Rename to avoid redefining parameter built-ins (amulhern) - Change name to avoid redefining built-in (amulhern) - Remove unused parameter in makeupdates. (amulhern) - Removed unused argument 'options' from testMount (amulhern) - Make signature of _setSize match that of the method it overrrides. (amulhern) - Actually use argv parameter (amulhern) - Pass fname as first argument to shutil.copy2 (amulhern) - Remove minimumSector method and _minimumSector attribute (amulhern) - Disable not-callable pylint warning. (amulhern) - Set child_factory_fstype to None in DeviceFactory (amulhern) - Suppress unpacking-non-sequence pylint warning (amulhern) - Prefix name with defining package (amulhern) - Update Platform instance from flags instead of replacing it. (#1090646) (dlehman) - Rename to avoid redefining built-ins where the redefinition is method local. (amulhern) - Set device.format in else block of try/except/else. (amulhern) - Do not run pylint on sphinx generated conf.py (amulhern) - Get rid of a redefined builtin while simplifying method. (amulhern) - Compress loop into generator list comprehension (amulhern) - Rewrite resize() method to depend on _resizable. (amulhern) - Remove definition of LVMThinLogicalVolumeDevice._resizable (amulhern) - Add an attribute docstring for _resizable. (amulhern) - Correct comment on resizable property (amulhern)
2014-05-05 23:24:03 +00:00
/blivet-0.51.tar.gz
- Split ROOT_PATH usage into getTargetPhysicalRoot()/getSysroot() (walters) - Update and fix copyright info for docs. (dlehman) - Add some tests for extended partition management. (dlehman) - Add some tests that verify the results of DeviceTree.populate. (dlehman) - Add a base class for tests backed by disk image storage. (dlehman) - Adapt examples to examples/common.py function dispersement. (dlehman) - Change devices.SparseFileDevice._create to use util.create_sparse_file. (dlehman) - Move set_up_logging and create_sparse_file into blivet.util for reuse. (dlehman) - Make examples.common.tear_down_disk_images a DeviceTree method. (dlehman) - Fix handling of devices activated as a side-effect of actions. (dlehman) - Check for problematic active devices before processing any actions. (dlehman) - Split some large blocks out of DeviceTree.processActions. (dlehman) - Explicitly requested extended partitions already have an action. (dlehman) - Fix handling of extended partitions across various modes of operation. (dlehman) - Handle the case of md arrays getting activated from outside blivet. (dlehman) - Make an extra effort to remove dm partition nodes that want to stay. (dlehman) - Fix handling of clearing a partitioned disk and leaving it cleared. (dlehman) - Don't check for disklabels on partitions. (dlehman) - Update targetSize to reflect actual size after a device is created. (dlehman) - Remove redundant msecs from logging timestamp. (dlehman) - Make signature of Size.__new__ match signature of Decimal.__new__ (amulhern) - Change Size so that it takes a single value parameter. (amulhern) - Change all 'format' keyword args to 'fmt' in Device constructors (amulhern) - Change format keyword argument to fmt in scheduleCreateFormat (amulhern) - Change keyword parameters in devicetree.findActions (amulhern) - Change ActionCreateFormat constructor keyword argument to 'fmt' (amulhern) - Remove unused parameter 'ignoreErrors' from umountFilesystems() (amulhern) - Remove parameter 'raiseErrors' from mountFilesystems() methods. (amulhern) - Disable unused argument warning for 'major' and 'minor' (amulhern) - Set dummy functions as values rather than via function definition syntax. (amulhern) - Pass size value to superconstructor for LVMVolumeGroupDevice. (amulhern) - Sort the pylint-false-positives file (amulhern) - Do not disable unused argument warning. (amulhern) - Omit pylint warning about disabled warnings or errors from pylint log. (amulhern) - Put the pyblock warning in pylint-false-positives (amulhern) - Remove obsolete documentation for parameter 'label'. (amulhern)
2014-05-09 00:31:58 +00:00
/blivet-0.52.tar.gz
- Remove extra quotes from the xfs_db arguments. (dshea) - Factor duplicate code in __deepcopy__ methods into one method (#1095244) (amulhern) - Rearrange code related to handleUdevDeviceFormat() (#1095329) (amulhern) - Make dumpState catch and log all AttributeErrors (#1095329) (amulhern) - Add sectorSize property to catch and handle missing partedDevice (#1095329) (amulhern) - Get rid of remaining uses of spec keyword for Size() in examples directory. (amulhern) - Generalize false positive regular expression for multiple pylint versions (amulhern) - Do not run some tests unless running on Jenkins. (amulhern) - Miscellaneous pylint fixes. (amulhern) - Globally disable pointless string statement warning (amulhern) - Disable unused argument warning for 'args' in TmpFSDevice constructor (amulhern) - Omit 'args' parameter from formats constructors (amulhern) - Disabled unused argument warning for kwargs in formats.destroy() (amulhern) - Omit *args from parameters for format.create() and formats.destroy() (amulhern) - Omit *args from parameters in formats.setup() (amulhern) - Make formats.teardown() not take any extra parameters. (amulhern) - Make formats.mount use explicit keywords instead of kwargs. (amulhern) - Remove non-self params from FS.doResize method (amulhern) - Make doFormat use regular style keyword parameters (amulhern) - Do not use *args, **kwargs idiom in scheduleCreateFormat. (amulhern) - Do not use *args, **kwargs idiom in various schedule* auxiliary test methods. (amulhern) - Remove upgrading param from turnOnSwap() (amulhern) - Disable unused-argument warning (amulhern) - Disable pylint unused-argument warning. (amulhern)
2014-05-20 23:49:43 +00:00
/blivet-0.53.tar.gz
/blivet-0.54.tar.gz
- IPSeriesPPC now supports GPT in Open Firmware (hamzy) - Fix device name validation for devices that can contain / (#1103751) (dshea) - Add a getRaidLevel() convenience method to raid.py (amulhern) - Make a StorageDevice.raw_device property and use it where appropriate (amulhern) - Simplify a small chunk of Blivet.updateKSData() (amulhern) - Move the code for getting a space requirement from devicefactory to raid. (amulhern) - Make all devicefactory classes uses RAID objects instead of strings. (amulhern) - Remove devicefactory.get_raid_level from blivet (amulhern) - Put get_supported_raid_levels in devicefactory.py (amulhern) - Make BTRFS devices use RAID objects instead of strings for levels (amulhern) - Add lists of supported RAID levels for btrfs and lvm (amulhern) - Add "linear" to mdraid's list of supported raid levels. (amulhern) - Remove getRaidLevel() from mdraid file and make RAID_levels public (amulhern) - Check for required methods in MDRaidLevels.isRaidLevel. (amulhern) - Use has_redundancy property to decide how to add a member to an array. (amulhern) - Update the mdraid.mdadd comments (amulhern) - Use has_redundancy raid property when checking whether a device is removable (amulhern) - Make createBitmap() a property and update tests appropriately. (amulhern) - Add a Dup class to the various descendants of RAIDLevel. (amulhern) - Add an is_uniform property to the RAID levels. (amulhern) - Add a has_redundancy method that returns True if there is actual redundancy (amulhern) - Add Linear and Single to the RAID classes. (amulhern) - Move Container class to raid package and tidy it up (amulhern) - Allow the RAID object itself to be a valid RAID descriptor for lookup. (amulhern) - Adjust RaidLevel hierarchy so that all raid level objects extend RAIDLevel (amulhern) - No longer use _standard_levels as the default set of RAID levels. (amulhern) - Extract selection of members in complete() into a separate method. (amulhern) - Remove DMRaidArrayDevice.members property. (amulhern) - Comment mdraid.mdcreate() and update tests appropriately. (amulhern) - Import name 'lvm' instead of names from lvm package. (amulhern) Please enter the commit message for your changes. Lines starting
2014-06-06 08:28:31 +00:00
/blivet-0.55.tar.gz
/blivet-0.56.tar.gz
/blivet-0.57.tar.gz
/blivet-0.58.tar.gz
/blivet-0.59.tar.gz