README.rpm-dist
-----------------------------------------------------------------------------
Version 8.4, for the PostgreSQL 8.4 RPM set.
Devrim Gündüz <devrim@CommandPrompt.com>
-----------------------------------------------------------------------------
Contents:
0.) Quick note about '-i'
1.) Introduction and QuickStart
2.) PostgreSQL RPM packages and rationale
3.) Starting multiple postmasters
4.) Regression Testing
5.) Starting postmaster automatically on startup
6.) Grand Unified Configuration(GUC) File
7.) Logging set up
8.) Rebuilding from the source RPM
9.) Contrib files
10.) Further Information Resource
QUICK NOTE ABOUT '-i'
-----------------------------------------------------------------------------
The postmaster '-i' option is NOT used by default in the initscript shipped
with these RPMs. Please do NOT modify the initscript to add the '-i' back
in -- it will get overwritten on the next package upgrade. Rather, see the
section below on the Grand Unified Configuration file, which includes the
recommended way to get '-i' functionality.
INTRODUCTION
-----------------------------------------------------------------------------
This document exists to explain the layout of the RPMs for PostgreSQL, to
describe various RPM specifics, and to document special features found
in the RPMset.
This document is written to be applicable to version 8.4 of PostgreSQL,
which is the current version of the RPMs as of this writing. More to the
point, versions prior to 8.4 are not documented here.
Official PostgreSQL Global Development Group RPMs carry a 'PGDG after the
release number. Other RPMsets as distributed with Linux distributions may
have a different release number and initials.
If you want to stay up-to-date on the PostgreSQL core itself, you may
want to use PGDG set, instead of the binaries supplied by distribution.
These RPMs do not support any sort of major version upgrading process
other than that documented in the regular documentation. That is, you
must dump, upgrade,initdb, and restore your data if you are
performing a major version update. This is not needed for minor version
updates.
For major version upgrade, dump first, then remove the old server
subpackage, install the new package, and restore the data from dump.
This document is intended for use only with Red Hat, CentOS and Fedora.
QUICKSTART
-----------------------------------------------------------------------------
For a fresh installation, you will need to initialize the cluster first. Run:
service postgresql initdb
as root, and it will prepare a new database cluster for you. Then you will
need to start PostgreSQL. Again as root, run:
service postgresql start
This command will start a postmaster that willl listen on localhost and Unix
socket 5432 only. Edit /var/lib/pgsql/data/postgresql.conf and pg_hba.conf
if you want to allow remote access -- see the section on Grand Unified
Configuration.
The file /var/lib/pgsql/.bash_profile is packaged to help with the
setting of environment variables. You may edit this file, and it won't be
overwritten during an upgrade. However, enhancements and bugfixes may
be added to this file, so be sure to check .bash_profile.rpmnew after
upgrading.
The user 'postgres' is created during installation of the server subpackage.
This user by default is UID and GID 26. The user has the default shell set to
bash, and the home directory set to /var/lib/pgsql. This user also has no
default password -- in order to be able to su to it from a non-root account
or login as 'postgres' you will need to set a password using passwd.
POSTGRESQL RPM PACKAGES AND RATIONALE.
-----------------------------------------------------------------------------
PostgreSQL is split up into multiple packages so that users can 'pick and
choose' what pieces are needed, and what dependencies are required.
The RPMset is packaged in the following subpackages:
postgresql: Key clients and libraries, and documentation
postgresql-libs: Client shared libraries
postgresql-server: Server executables and data files
postgresql-devel: Development libraries and include files
postgresql-python: The PyGreSQL client library
postgresql-tcl: Tcl client library (Pgtcl)
postgresql-test: The regression tests and associated files
postgresql-docs: Extra documentation, such as the tutorial files
postgresql-contrib: The contrib source tree, as well as selected binaries
postgresql-plperl: PL/Perl procedural language
postgresql-plpython: PL/Python procedural language
postgresql-pltcl: PL/Tcl procedural language
You have to install postgresql and postgresql-libs to do anything.
postgresql-server is needed unless you only plan to use the clients to work
with a remote PostgreSQL server. The others are optional.
Note that there is no postgresql-perl, postgresql-jdbc, postgresql-odbc, or
postgresql-tk package any longer. This is due to these portions being split
into separate source distributions.
While PyGreSQL was split out from the core PostgreSQL distribution, thanks to
Kaj's work it is still included as the python subpackage. Also, Pgtcl is
still included as the tcl subpackage, although it is not part of the core
distribution anymore.
RPM FILE LOCATIONS.
-----------------------------------------------------------------------------
To be in compliance with the Linux FHS, the PostgreSQL RPMs install files in
a manner not consistent with most of the PostgreSQL documentation. According
to the standard PostgreSQL documentation, PostgreSQL is installed under the
directory /usr/local/pgsql, with executables, source, and data existing in
various subdirectories.
Different distributions have different ideas of some of these file locations.
In particular, the documentation directory can be /usr/doc, /usr/doc/packages,
/usr/share/doc, /usr/share/doc/packages, or some other similar path.
However, the Red Hat / CentOS / Fedora RPM's install the files like
this:
Executables: /usr/bin
Libraries: /usr/lib (or /usr/lib64)
Documentation: /usr/share/doc/postgresql-docs-x.y.z/html
Contrib documentation: /usr/share/doc/postgresql-contrib-x.y.z
Source: not installed
Data: /var/lib/pgsql/data
Backup area: /var/lib/pgsql/backups
Templates: /usr/share/pgsql
Procedural Languages: /usr/lib/pgsql or /usr/lib64/pgsql
Development Headers: /usr/include/pgsql
Other shared data: /usr/share/pgsql
Regression tests: /usr/lib/pgsql/test/regress (in the -test package)
or /usr/lib64/pgsql/test/regress
Documentation SGML: /usr/share/doc/postgresql-docs-x.y.z/sgml
While it may seem gratuitous to place these files in different locations, the
FHS requires it -- distributions should not ever touch /usr/local. It may
also seem like more work to keep track of where everything is -- but, that's
the beauty of RPM -- you don't have to keep track of the files, RPM does it
for you.
These RPMs are designed to be LSB-compliant -- if you find this not to be the
case, please let us know by way of the pgsqlrpms-hackers@pgfoundry.org
mailing list.
MULTIPLE POSTMASTERS
-------------------------------------------------------------------------------
The postgresql-server RPM contains an 'initscript' that is used to start the
postmaster. The current version of this script has logic to be able to start
multiple postmasters, with different data areas, listening on different ports,
etc. To use this functionality requires root access.
As an example, let us create a secondary postmaster called, creatively enough,
'secondary'. Here are the steps:
1.) create a hard link in /etc/rc.d/init.d (or equivalent location)
to postgresql named 'secondary' : ln postgresql secondary Pick
a name not already used in /etc/rc.d/init.d!
2.) create a file in /etc/sysconfig/pgsql named secondary. This file is
a shell script -- typically you would define PGDATA, PGPORT, and PGOPTS
here. Since $PGDATA/postgresql.conf will override many of these
settings, except PGDATA, you might be surprised on startup.
3.) create the target PGDATA.
4.) Initdb the targe PGDATA as documented in the main documentation.
Automatic initdb may or may not work for you, so a manual one is
preferred. This must be done as user 'postgres'
5.) Edit postgresql.conf to change the port, address, tcpip settings, etc.
6.) Start the postmaster with 'service secondary start'.
Note that there may be problems with the standard symlink -- consider this
support experimental at this point in time.
REGRESSION TESTING
-------------------------------------------------------------------------------
If you install the postgresql-test RPM then you can run the PostgreSQL
regression tests. These tests stress your database installation and produce
results that give you assurances that the installation is complete, and that
your database machine is up to the task.
To run the regression tests under the RPM installation, make sure that
postmaster has been started (if not, su to root and execute the
"/etc/rc.d/init.d/postgresql start" init script), cd to
/usr/lib/pgsql/test/regress (or /usr/lib64/pgsql/test/regress),
su to postgres, and execute "make check".
This command will start the regression tests and will both show the
results to the screen and store the results in the file regress.out.
If any tests fail, see the file regression.diffs in that directory for details,
and read the "Regression Tests" section of the PostgreSQL documentation to
find out whether the differences are actually significant. If you need help
interpreting the results, contact the pgsql-general list at
postgresql.org.
After testing, say "make clean" to remove the files generated by the test
script.
STARTING POSTMASTER AUTOMATICALLY AT SYSTEM STARTUP
-------------------------------------------------------------------------------
Fedora / Red Hat / CentOS use the System V Init package. A startup
script for PostgreSQL is provided in the server package, as
/etc/rc.d/init.d/postgresql. To start the postmaster, with sanity
checking, as root, run
service postgresql start
To shut the postmaster down,
service postgresql stop
There are other possible commands to this script -- execute
'service postgresql' for a listing.
To get this script to run at system startup or any time the system switches
into runlevels 3, 4, or 5, run:
chkconfig --add postgresql
chkconfig --level 345 postgresql on
and the proper symlinks will be created. See the chkconfig man page for more
information. Note that this is manual -- while the startup script can include
tags to allow chkconfig to automatically perform the symlinking, this is not
done at this time.
GRAND UNIFIED CONFIGURATION (GUC) FILE
-------------------------------------------------------------------------------
The PostgreSQL server has many tunable parameters -- the file
/var/lib/pgsql/data/postgresql.conf is the master configuration file for the
whole system.
The RPM ships with the default file -- you will need to tune the
parameters for your installation. In particular, you might want to allow
nonlocal TCP/IP socket connections -- in order to allow these, you will need
to edit the postgresql.conf file. The line in question contains the string
'listen_addresses' -- you need to both uncomment the line and set the value
to '*' to get the postmaster to accept nonlocal connections. You'll also need
to adjust pg_hba.conf appropriately.
LOGGING SET UP
-------------------------------------------------------------------------------
By default, the postmaster's stderr log is directed into files placed in a
pg_log subdirectory of the data directory (ie, /var/lib/pgsql/data/pg_log).
The out-of-the-box configuration rotates among seven files, one for each
day of the week. You can adjust this by changing postgresql.conf settings.
REBUILDING FROM SOURCE RPM
-------------------------------------------------------------------------------
If your distribution is not supported by the binary RPMs from PostgreSQL.org,
you will need to rebuild from the source RPM. Download the .src.rpm for this
release. You will need to be root to rebuild, unless you have set up
a non-root build environment (which is the recommended method anyway).
Install the source RPM with rpm -i, then cd to the rpm building area
(which is /usr/src/redhat by default). You will have to have a full
development environment to rebuild the full RPM set.
This release of the RPMset includes the ability to conditionally build
sets of packages. The parameters, their defaults, and the meanings are:
beta 0 #build with cassert and do not strip the binaries
python 1 #build the postgresql-python package.
tcl 1 #build the postgresql-tcl package.
test 1 #build the postgresql-test package.
plpython 1 #build the PL/Python procedural language package.
pltcl 1 #build the PL/Tcl procedural language package.
plperl 1 #build the PL/Perl procedural language package.
ssl 1 #use OpenSSL support.
kerberos 1 #use Kerberos 5 support.
nls 1 #build with national language support.
ldap 1 #build with LDAP support.
pam 1 #build with PAM support.
runselftest 1 #do "make check" during the build.
sdt 1 #build with SystemTap support.
xml 1 #build with XML support
pgfts 1 #build with --enable-thread-safety
uuid 1 #build contrib/uuid-ossp
To use these defines, invoke a rebuild like this:
rpmbuild --rebuild --define 'python 0' --define 'tcl 0' \
--define 'test 0' --define 'runselftest 0' --define 'kerberos 0' \
postgresql-8.4.0-1.src.rpm
This line would disable the python, tcl, and test subpackages, disable the
regression test run during build, and disable kerberos support.
You might need to disable runselftest if there is an installed version of
PostgreSQL that is a different major version from what you are trying to
build. The self test tends to pick up the installed libpq.so shared library
in place of the one being built :-(, so if that isn't compatible the test will
fail. Also, you can't use runselftest when doing the build as root.
More of these conditionals will be added in the future.
CONTRIB FILES
-------------------------------------------------------------------------------
The contents of the contrib tree are packaged into the -contrib subpackage
and are processed with make and make install. There is documentation in
/usr/share/doc/postgresql-contrib-VERSION for these modules. Most of the
modules are in /usr/lib/pgsql (or /usr/lib64/pgsql) for loadable
modules, and binaries are in /usr/bin. In the future these files may be
split out, depending upon function and dependencies.
MORE INFORMATION
-------------------------------------------------------------------------------
You can get more information at http://www.postgresql.org and
http://yum.pgsqlrpms.org
Please help make this packaging better -- let us know if you find problems, or
better ways of doing things. You can reach us by e-mail at
pgsqlrpms-hackers@pgfoundry.org
-------------------------------------------------------------------------------
