- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild

Signed-off-by: Fedora Release Engineering <releng@fedoraproject.org>

.cvsignore

@@ -1 +0,0 @@
-pilot-link-0.12.3.tar.bz2

.gitignore

@@ -0,0 +1 @@
+pilot-link-0.12.5.tar.bz2

60-pilot.rules

@@ -1 +0,0 @@
-BUS=="usb", SYSFS{product}=="Palm Handheld*|Handspring*",KERNEL=="ttyUSB[13579]", SYMLINK="pilot", GROUP="uucp", MODE="0660"

69-pilot-link.rules

@@ -0,0 +1,104 @@
+ACTION!="add", GOTO="pilot_link_end"
+SUBSYSTEM!="usb", GOTO="pilot_link_end"
+
+# Sony
+ATTR{idVendor}!="054c", GOTO="pilot_link_sony_end"
+# Sony NR and other Palm OS 4.1
+ATTR{idProduct}=="000a", ENV{ID_PDA}="1"
+# Sony S S320 and other Palm OS 3.5
+ATTR{idProduct}=="0038", ENV{ID_PDA}="1"
+# Sony T, SJ series, and other Palm OS 4.0
+ATTR{idProduct}=="0066", ENV{ID_PDA}="1"
+# Sony S360
+ATTR{idProduct}=="0095", ENV{ID_PDA}="1"
+# Sony NR70V/U
+ATTR{idProduct}=="009a", ENV{ID_PDA}="1"
+# Sony NX
+ATTR{idProduct}=="00da", ENV{ID_PDA}="1"
+# Sony NZ
+ATTR{idProduct}=="00e9", ENV{ID_PDA}="1"
+# Sony UX
+ATTR{idProduct}=="0144", ENV{ID_PDA}="1"
+# Sony TJ
+ATTR{idProduct}=="0169", ENV{ID_PDA}="1"
+LABEL="pilot_link_sony_end"
+
+# Handspring
+ATTR{idVendor}!="082d", GOTO="pilot_link_handspring_end"
+# Visor/Treo 300
+ATTR{idProduct}=="0100", ENV{ID_PDA}="1"
+# Treo
+ATTR{idProduct}=="0200", ENV{ID_PDA}="1"
+# Treo 600
+ATTR{idProduct}=="0300", ENV{ID_PDA}="1"
+LABEL="pilot_link_handspring_end"
+
+# Palm, Inc. and palmOne
+ATTR{idVendor}!="0830", GOTO="pilot_link_palm_end"
+# m500
+ATTR{idProduct}=="0001", ENV{ID_PDA}="1"
+# m505
+ATTR{idProduct}=="0002", ENV{ID_PDA}="1"
+# m515
+ATTR{idProduct}=="0003", ENV{ID_PDA}="1"
+# unknown
+ATTR{idProduct}=="0010", ENV{ID_PDA}="1"
+# unknown
+ATTR{idProduct}=="0011", ENV{ID_PDA}="1"
+# i705
+ATTR{idProduct}=="0020", ENV{ID_PDA}="1"
+# Tungsten Z
+ATTR{idProduct}=="0030", ENV{ID_PDA}="1"
+# Tungsten W
+ATTR{idProduct}=="0031", ENV{ID_PDA}="1"
+# m125
+ATTR{idProduct}=="0040", ENV{ID_PDA}="1"
+# m130
+ATTR{idProduct}=="0050", ENV{ID_PDA}="1"
+# unknown
+ATTR{idProduct}=="0051", ENV{ID_PDA}="1"
+# unknown
+ATTR{idProduct}=="0052", ENV{ID_PDA}="1"
+# unknown
+ATTR{idProduct}=="0053", ENV{ID_PDA}="1"
+# Tungsten series, Zire 71
+ATTR{idProduct}=="0060", ENV{ID_PDA}="1"
+# Zire 21, 31, 72, Z22, Tungsten E2, T3, TX, Treo 650, 680, LifeDrive
+ATTR{idProduct}=="0061", ENV{ID_PDA}="1"
+# Zire 21, 31, 72, Z22, Tungsten E2, T3, TX, Treo 650, 680, LifeDrive
+ATTR{idProduct}=="0062", ENV{ID_PDA}="1"
+# Zire 21, 31, 72, Z22, Tungsten E2, T3, TX, Treo 650, 680, LifeDrive
+ATTR{idProduct}=="0063", ENV{ID_PDA}="1"
+# Zire
+ATTR{idProduct}=="0070", ENV{ID_PDA}="1"
+# Zire
+ATTR{idProduct}=="0071", ENV{ID_PDA}="1"
+# m100
+ATTR{idProduct}=="0080", ENV{ID_PDA}="1"
+# unknown
+ATTR{idProduct}=="0099", ENV{ID_PDA}="1"
+# unknown
+ATTR{idProduct}=="0100", ENV{ID_PDA}="1"
+LABEL="pilot_link_palm_end"
+
+# Samsung i330
+ATTR{idVendor}=="04e8", ATTR{idProduct}=="8001", ENV{ID_PDA}="1"
+
+# Garmin IQUE 3600
+ATTR{idVendor}=="091e", ATTR{idProduct}=="0004", ENV{ID_PDA}="1"
+
+# Kyocera 7135 Smartphone
+ATTR{idVendor}=="0c88", ATTR{idProduct}=="0021", ENV{ID_PDA}="1"
+# Kyocera 6035 Smartphone
+ATTR{idVendor}=="0c88", ATTR{idProduct}=="a226", ENV{ID_PDA}="1"
+
+# Tapwave Zodiac, Zodiac2
+ATTR{idVendor}=="12ef", ATTR{idProduct}=="0100", ENV{ID_PDA}="1"
+
+# Aceeca MEZ1000
+ATTR{idVendor}=="4766", ATTR{idProduct}=="0001", ENV{ID_PDA}="1"
+
+# Alphasmart Dana
+ATTR{idVendor}=="081e", ATTR{idProduct}=="df00", ENV{ID_PDA}="1"
+
+LABEL="pilot_link_end"

Makefile

@@ -1,21 +0,0 @@
-# Makefile for source rpm: pilot-link
-# $Id: Makefile,v 1.1 2004/09/09 10:27:02 cvsdist Exp $
-NAME := pilot-link
-SPECFILE = $(firstword $(wildcard *.spec))
-
-define find-makefile-common
-for d in common ../common ../../common ; do if [ -f $$d/Makefile.common ] ; then if [ -f $$d/CVS/Root -a -w $$/Makefile.common ] ; then cd $$d ; cvs -Q update ; fi ; echo "$$d/Makefile.common" ; break ; fi ; done
-endef
-
-MAKEFILE_COMMON := $(shell $(find-makefile-common))
-
-ifeq ($(MAKEFILE_COMMON),)
-# attempt a checkout
-define checkout-makefile-common
-test -f CVS/Root && { cvs -Q -d $$(cat CVS/Root) checkout common && echo "common/Makefile.common" ; } || { echo "ERROR: I can't figure out how to checkout the 'common' module." ; exit -1 ; } >&2
-endef
-
-MAKEFILE_COMMON := $(shell $(checkout-makefile-common))
-endif
-
-include $(MAKEFILE_COMMON)

README.fedora

@@ -29,6 +29,13 @@ https://bugzilla.redhat.com/
 Visor module setup
 ------------------
 
+ Note since F-12, the default access for libusb pilot-link has changed
+ again to use udev, so you may need to remove
+ /lib/udev/rules.d/69-pilot-link.rules before executing the following.
+ For more discussion see:
+
+ https://bugzilla.redhat.com/show_bug.cgi?id=529259
+
 The Visor module is a backwards compatibility solution to expose the USB
 connection of newer Palm handhelds as a serial device, which is what
 older versions of pilot-link and dependent packages require to work.
@@ -39,19 +46,30 @@ Unfortunately this solution is inherently imperfect when used with udev
 1) disable libusb: remove (or comment out the contents) of
 /etc/modprobe.d/blacklist-visor
 
-2) Configure udev to detect the Palm and create /dev/pilot: copy
-60-pilot.rules from /usr/share/pilot-link/udev/ to /etc/udev/rules.d/
+2) Configure udev to detect the Palm:
+2a) copy 60-libpisock.rules from /usr/share/pilot-link/udev/ to 
+/etc/udev/rules.d/
+2b) within 60-libpisock.rules change all instances of GROUP="dialout" to
+GROUP="uucp"
 
 3) Configure permissions so that a console user can access /dev/pilot:
 copy 60-pilot.perms from /usr/share/pilot-link/udev/ to
 /etc/security/console.perms.d/
 
-If your palm is not working you could try to change the symlink 
-created in 60-pilot.rules - change the tag KERNEL=="ttyUSB[13579]" to
-KERNEL=="ttyUSB[02468]".
+When you connect your Palm handheld, watch /var/log/messages - the visor
+module should create two ttyUSB devices. Depending on your handheld
+model you will need to use either the first or second of these as the
+--port argument with pilot-link based programs.
 
-For a discussion of the inherent problems related to the Visor module,
-see:
+Some users like the convenience of linking this device to /dev/pilot.
+To do this add SYMLINK="pilot" and one of either KERNEL=="ttyUSB[02468]"
+or KERNEL=="ttyUSB[13579]" to each line in 60-libpisock.rules, depending
+on whether you need to use the first or second visor ttyUSB device.
+N.B. This is inherently unreliable since another driver could create an
+odd number of ttyUSB devices before the /dev/pilot symlink is created.
+
+For further discussion of the inherent problems related to the Visor 
+module, see:
 https://bugzilla.redhat.com/show_bug.cgi?id=158809
 
 
@@ -63,4 +81,4 @@ on their serial port (e.g. /dev/ttyS0) or /dev/pilot can be symlinked to
 the serial port.
 
 Kevin R. Page, 2007-12-11
-Alex Lancaster, 2008-01-07
+Alex Lancaster, 2009-11-15

bluetooth-session-register.diff

@@ -1,71 +0,0 @@
-? bluetooth-session-register.diff
-? cscope.out
-? pilot-link-0.12.0.tar.gz
-? bindings/Python/setup-standalone.py
-? src/pilot-csd
-? src/pilot-debugsh
-? src/pilot-dlpsh
-? src/pilot-foto-treo600
-? src/pilot-foto-treo650
-? src/pilot-getram
-? src/pilot-getrom
-? src/pilot-getromtoken
-? src/pilot-hinotes
-? src/pilot-install-datebook
-? src/pilot-install-expenses
-? src/pilot-install-hinote
-? src/pilot-install-memo
-? src/pilot-install-netsync
-? src/pilot-install-todo
-? src/pilot-install-todos
-? src/pilot-install-user
-? src/pilot-memos
-? src/pilot-nredir
-? src/pilot-read-expenses
-? src/pilot-read-ical
-? src/pilot-read-notepad
-? src/pilot-read-palmpix
-? src/pilot-read-screenshot
-? src/pilot-read-todos
-? src/pilot-read-veo
-? src/pilot-reminders
-Index: libpisock/bluetooth.c
-===================================================================
-RCS file: /cvs/pilot-link/pilot-link_src/libpisock/bluetooth.c,v
-retrieving revision 1.3
-diff -a -u -p -r1.3 bluetooth.c
---- libpisock/bluetooth.c	8 Feb 2007 17:08:52 -0000	1.3
-+++ libpisock/bluetooth.c	28 Dec 2007 12:31:24 -0000
-@@ -167,19 +167,19 @@ add_hotsync(sdp_session_t *session,
- }
- 
- static int
--register_sdp (uint32_t *handle, int *channel, sdp_session_t *sess)
-+register_sdp (uint32_t *handle, int *channel, sdp_session_t **sess)
- {
- 	svc_info_t si;
- 	bdaddr_t interface;
- 
- 	bacpy (&interface, BDADDR_ANY);
--	sess = sdp_connect (&interface, BDADDR_LOCAL, 0);
-+	*sess = sdp_connect (&interface, BDADDR_LOCAL, 0);
- 
--	if (!sess)
-+	if (*sess == NULL)
- 		return -1;
- 	memset (&si, 0, sizeof(si));
- 	si.name = "HOTSYNC";
--	return add_hotsync (sess, 0, &interface, &si, handle, channel);
-+	return add_hotsync (*sess, 0, &interface, &si, handle, channel);
- }
- 
- static int
-@@ -325,7 +325,7 @@ pi_bluetooth_protocol (pi_device_t *dev)
- static void
- pi_bluetooth_register_hotsync_sdp (struct pi_bluetooth_data *data)
- {
--	if (register_sdp (&data->handle, &data->channel, data->sess) < 0) {
-+	if (register_sdp (&data->handle, &data->channel, &data->sess) < 0) {
- 		data->channel = -1;
- 		data->handle = 0;
- 		data->sess = NULL;

pilot-link-0.12.2-Zire.patch

@@ -1,13 +0,0 @@
-diff -up pilot-link-0.12.2/libpisock/usb.c.pom pilot-link-0.12.2/libpisock/usb.c
---- pilot-link-0.12.2/libpisock/usb.c.pom	2008-02-07 15:03:58.000000000 +0100
-+++ pilot-link-0.12.2/libpisock/usb.c	2008-02-07 15:02:51.000000000 +0100
-@@ -810,7 +810,8 @@ pi_usb_dev_t known_devices[] = {
- 	{
- 		.vendor 	= 0x0830,
- 		.product 	= 0x0061,
-+		.idstr 		= "Zire 31, 72, Z22",
-+		.flags		= USB_INIT_TAPWAVE,
--		.idstr 		= "Zire 31, 72",
- 	},
- 
- 	{

pilot-link-0.12.2-open.patch

@@ -1,5 +1,6 @@
---- pilot-link-0.12.2/libpisock/serial.c.pom	2006-10-12 16:21:22.000000000 +0200
-+++ pilot-link-0.12.2/libpisock/serial.c	2007-08-29 16:31:25.000000000 +0200
+diff -up pilot-link-0.12.5/libpisock/serial.c.pom pilot-link-0.12.5/libpisock/serial.c
+--- pilot-link-0.12.5/libpisock/serial.c.pom	2006-10-12 16:21:22.000000000 +0200
++++ pilot-link-0.12.5/libpisock/serial.c	2010-06-24 10:35:48.000000000 +0200
 @@ -286,7 +286,7 @@ pi_serial_connect(pi_socket_t *ps, struc
  		data->establishrate = data->rate = 57600;
  	}
@@ -18,8 +19,9 @@
  		int 	save_errno = errno;
  #ifdef MAXPATHLEN
  		char	realport[MAXPATHLEN];
---- pilot-link-0.12.2/libpisock/usb.c.pom	2007-02-09 15:26:09.000000000 +0100
-+++ pilot-link-0.12.2/libpisock/usb.c	2007-08-29 16:23:42.000000000 +0200
+diff -up pilot-link-0.12.5/libpisock/usb.c.pom pilot-link-0.12.5/libpisock/usb.c
+--- pilot-link-0.12.5/libpisock/usb.c.pom	2010-06-24 09:24:56.000000000 +0200
++++ pilot-link-0.12.5/libpisock/usb.c	2010-06-24 10:36:08.000000000 +0200
 @@ -267,7 +267,7 @@ pi_usb_connect(pi_socket_t *ps, struct s
  		data->establishrate = data->rate = 57600;
  	}
@@ -38,14 +40,3 @@
  	if (result < 0)
  		return result;
  
---- pilot-link-0.12.2/src/pilot-schlep.c.pom	2006-10-12 16:21:21.000000000 +0200
-+++ pilot-link-0.12.2/src/pilot-schlep.c	2007-08-29 16:44:40.000000000 +0200
-@@ -38,7 +38,7 @@ static int Fetch(int sd, char *filename)
- 		fd;
- 	pi_buffer_t *buffer;
- 
--	fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC);
-+	fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC, 0666);
- 	if (fd < 0)
- 		return -1;
- 

pilot-link-0.12.3-clio.patch

@@ -0,0 +1,11 @@
+diff -up pilot-link-0.12.4/libpisock/usb.c.clio pilot-link-0.12.4/libpisock/usb.c
+--- pilot-link-0.12.4/libpisock/usb.c.clio	2009-05-28 14:55:43.000000000 +0200
++++ pilot-link-0.12.4/libpisock/usb.c	2009-05-28 14:56:57.000000000 +0200
+@@ -655,6 +655,7 @@ pi_usb_dev_t known_devices[] = {
+ 		.vendor 	= 0x054c,
+ 		.product 	= 0x0066,
+ 		.idstr 		= "Sony T, SJ series, and other Palm OS 4.0 devices",
++		.flags      = USB_INIT_SONY_CLIE,
+ 	},
+ 
+ 	{

pilot-link-0.12.3-md5.patch

@@ -1,15 +0,0 @@
-diff -up pilot-link-0.12.3/include/pi-md5.h.md5 pilot-link-0.12.3/include/pi-md5.h
---- pilot-link-0.12.3/include/pi-md5.h.md5	2006-10-17 15:24:07.000000000 +0200
-+++ pilot-link-0.12.3/include/pi-md5.h	2007-12-11 08:47:56.000000000 +0100
-@@ -13,8 +13,10 @@
- #ifndef MD5_H
- #define MD5_H
- 
-+#include <stdint.h>
-+
- #define UINT8 unsigned char
--#define UINT32 unsigned long
-+#define UINT32 uint32_t
- 
- struct MD5Context {
- 	UINT32 buf[4];

pilot-link-0.12.5-ftbfs-f19.patch

@@ -0,0 +1,24 @@
+diff -up pilot-link-0.12.5/libpisock/md5.c.ftbfs-f19 pilot-link-0.12.5/libpisock/md5.c
+--- pilot-link-0.12.5/libpisock/md5.c.ftbfs-f19	2013-02-25 15:17:31.708780677 +0100
++++ pilot-link-0.12.5/libpisock/md5.c	2013-02-25 15:15:07.771861922 +0100
+@@ -125,7 +125,7 @@ void MD5Final(UINT8 digest[16], struct M
+ 
+ 	byteSwap(ctx->buf, 4);
+ 	memcpy(digest, ctx->buf, 16);
+-	memset(ctx, 0, sizeof(ctx));	/* In case it's sensitive */
++	memset(ctx, 0, sizeof(*ctx));	/* In case it's sensitive */
+ }
+ 
+ #ifndef ASM_MD5
+diff -up pilot-link-0.12.5/popt/popthelp.c.ftbfs-f19 pilot-link-0.12.5/popt/popthelp.c
+--- pilot-link-0.12.5/popt/popthelp.c.ftbfs-f19	2004-08-25 17:06:39.000000000 +0200
++++ pilot-link-0.12.5/popt/popthelp.c	2013-02-25 15:16:34.593606516 +0100
+@@ -683,7 +683,7 @@ static int showShortOptions(const struct
+     s[0] = '\0';
+     /*@-branchstate@*/		/* FIX: W2DO? */
+     if (str == NULL) {
+-	memset(s, 0, sizeof(s));
++	memset(s, 0, sizeof(*s));
+ 	str = s;
+     }
+     /*@=branchstate@*/

pilot-link-0.12.5-ftbfs-f21.patch

@@ -0,0 +1,22 @@
+diff -ur pilot-link-0.12.5.orig/configure pilot-link-0.12.5/configure
+--- pilot-link-0.12.5.orig/configure	2010-02-07 04:42:29.000000000 +0100
++++ pilot-link-0.12.5/configure	2014-05-09 15:36:30.466127800 +0200
+@@ -2604,12 +2604,12 @@
+ 
+ 
+ enable_werror=no
+-save_CFLAGS="$CFLAGS"
+-CFLAGS=`echo $save_CFLAGS | sed -e s/-Werror//g`
+-CXXFLAGS=`echo $save_CXXFLAGS | sed -e s/-Werror//g`
+-if test "x$CFLAGS" != "x$save_CFLAGS"; then
+-		enable_werror="yes"
+-fi
++#save_CFLAGS="$CFLAGS"
++#CFLAGS=`echo $save_CFLAGS | sed -e s/-Werror//g`
++#CXXFLAGS=`echo $save_CXXFLAGS | sed -e s/-Werror//g`
++#if test "x$CFLAGS" != "x$save_CFLAGS"; then
++#		enable_werror="yes"
++#fi
+ 
+ 
+ ac_aux_dir=

pilot-link-0.12.5-mp.patch

@@ -0,0 +1,13 @@
+diff -up pilot-link-0.12.5/doc/man/pilot-install-expenses.1.pom pilot-link-0.12.5/doc/man/pilot-install-expenses.1
+--- pilot-link-0.12.5/doc/man/pilot-install-expenses.1.pom	2010-02-07 04:43:11.000000000 +0100
++++ pilot-link-0.12.5/doc/man/pilot-install-expenses.1	2011-03-09 17:12:30.000000000 +0100
+@@ -76,7 +76,7 @@ Add the number of attendees to the expen
+                         \fB\-\-city\fR \fBSTRING\fR
+                     
+ .PP
+-Add entries to the "City" field in the expense record\&. These are free\-form values, and can be the name of the location, city, or town that the expense record occured in\&.
++Add entries to the "City" field in the expense record\&. These are free\-form values, and can be the name of the location, city, or town that the expense record occurred in\&.
+ 
+                         \fB\-n\fR,
+                         \fB\-\-note\fR \fBSTRING\fR
+diff -up pilot-link-0.12.5/doc/man/pilot-install-netsync.1.pom pilot-link-0.12.5/doc/man/pilot-install-netsync.1

pilot-link-0.12.5-redefinePerlsymbols.patch

@@ -0,0 +1,584 @@
+diff -up pilot-link-0.12.5/bindings/Perl/Pilot.xs.symbol pilot-link-0.12.5/bindings/Perl/Pilot.xs
+--- pilot-link-0.12.5/bindings/Perl/Pilot.xs.symbol	2007-11-12 18:49:54.000000000 +0100
++++ pilot-link-0.12.5/bindings/Perl/Pilot.xs	2011-07-01 16:03:35.080212371 +0200
+@@ -47,6 +47,10 @@
+ 
+ #include "const-c.inc"
+ 
++#ifndef sv_yes 
++#define sv_yes PL_sv_yes 
++#define sv_no PL_sv_no 
++#endif
+ 
+ typedef unsigned char * CPTR;
+ 
+@@ -160,7 +164,7 @@ SvChar4(arg)
+ 
+ #define pack_dbinfo(arg, var, failure) {	\
+ 		if (failure < 0)  {		\
+-			arg = &sv_undef;	\
++			arg = &PL_sv_undef;	\
+ 			self->errnop = failure;	\
+ 		} else {			\
+ 			HV * i = newHV();	\
+@@ -214,15 +218,15 @@ SvChar4(arg)
+ 		var.createDate 	= (s = hv_fetch(i, "createDate", 10, 0)) ? SvIV(*s) : 0;\
+ 		var.modifyDate 	= (s = hv_fetch(i, "modifyDate", 10, 0)) ? SvIV(*s) : 0;\
+ 		var.backupDate 	= (s = hv_fetch(i, "backupDate", 10, 0)) ? SvIV(*s) : 0;\
+-		if ((s = hv_fetch(i, "name", 4, 0)) ? SvPV(*s,na) : 0)		\
+-			strncpy(var.name, SvPV(*s, na), sizeof(var.name));	\
++		if ((s = hv_fetch(i, "name", 4, 0)) ? SvPV(*s,PL_na) : 0)		\
++			strncpy(var.name, SvPV(*s, PL_na), sizeof(var.name));	\
+ 		} else	{\
+ 			croak("argument is not a hash reference");		\
+ 		}
+ 
+ #define pack_userinfo(arg, var, failure) {	\
+ 	if (failure < 0)  {			\
+-		arg = &sv_undef;		\
++		arg = &PL_sv_undef;		\
+ 		self->errnop = failure;		\
+ 	} else {				\
+ 		HV * i = newHV();		\
+@@ -246,8 +250,8 @@ SvChar4(arg)
+ 		var.lastSyncPC 		= (s = hv_fetch(i, "lastSyncPC",         10, 0)) ? SvIV(*s) : 0;\
+ 		var.lastSyncDate 	= (s = hv_fetch(i, "lastSyncDate",       12, 0)) ? SvIV(*s) : 0;\
+ 		var.successfulSyncDate 	= (s = hv_fetch(i, "successfulSyncDate", 18, 0)) ? SvIV(*s) : 0;\
+-		if ((s = hv_fetch(i, "name", 4, 0)) ? SvPV(*s,na) : 0)\
+-			strncpy(var.username, SvPV(*s, na), sizeof(var.username));\
++		if ((s = hv_fetch(i, "name", 4, 0)) ? SvPV(*s,PL_na) : 0)\
++			strncpy(var.username, SvPV(*s, PL_na), sizeof(var.username));\
+ 		} else	{\
+ 			croak("argument is not a hash reference");\
+ 		}
+@@ -287,7 +291,7 @@ SvChar4(arg)
+ 	    	}\
+ 	} else {\
+ 		self->errnop = result;\
+-		PUSHs(&sv_undef);\
++		PUSHs(&PL_sv_undef);\
+ 	}
+ 
+ #define PackSI\
+@@ -329,7 +333,7 @@ SvChar4(arg)
+ 	    	}\
+ 		} else {\
+ 	    	self->errnop = result;\
+-	    	PUSHs(&sv_undef);\
++	    	PUSHs(&PL_sv_undef);\
+ 	    }
+ 
+ #define PackRecord {\
+@@ -421,7 +425,7 @@ SvChar4(arg)
+ 	    	}\
+ 		} else {\
+ 	    	self->errnop = result;\
+-	    	PUSHs(&sv_undef);\
++	    	PUSHs(&PL_sv_undef);\
+ 	    }
+ 
+ #define PackResource\
+@@ -473,7 +477,7 @@ SvChar4(arg)
+ 	    	}\
+ 		} else {\
+ 	    	self->errnop = result;\
+-	    	PUSHs(&sv_undef);\
++	    	PUSHs(&PL_sv_undef);\
+ 	    }
+ 
+ #define PackPref\
+@@ -536,7 +540,7 @@ SvChar4(arg)
+ 	    		croak("Unable to create resource");\
+ 		} else {\
+ 	    	self->errnop = result;\
+-	    	PUSHs(&sv_undef);\
++	    	PUSHs(&PL_sv_undef);\
+ 	    }
+ 
+ void doUnpackCategory(HV * self, struct CategoryAppInfo * c)
+@@ -576,7 +580,7 @@ void doPackCategory(HV * self, struct Ca
+ 	
+     if ((s = hv_fetch(self, "categoryName", 12, 0)) && SvOK(*s) && SvRV(*s) && (SvTYPE(av=(AV*)SvRV(*s))==SVt_PVAV))
+     	for (i=0;i<16;i++)
+-    		strncpy(c->name[i], (s=av_fetch(av, i, 0)) ? SvPV(*s,na) : "", 16);
++    		strncpy(c->name[i], (s=av_fetch(av, i, 0)) ? SvPV(*s,PL_na) : "", 16);
+ 	else
+ 		for (i=0;i<16;i++)
+ 			strcpy(c->name[i], "");
+@@ -602,7 +606,7 @@ void doPackCategory(HV * self, struct Ca
+ int SvList(SV * arg, char **list)
+ {
+ 	int i;
+-	char * str = SvPV(arg, na);
++	char * str = SvPV(arg, PL_na);
+ 	for (i=0;list[i];i++)
+ 		if (strcasecmp(list[i], str)==0)
+ 			return i;
+@@ -781,11 +785,11 @@ Pack(record)
+ 		    croak("Invalid advance unit %d encountered", u);
+ 		}
+ 	    } else {
+-	    	if (strEQ(SvPV(*s, na), "minutes"))
++	    	if (strEQ(SvPV(*s, PL_na), "minutes"))
+ 		    u = 0;
+-	    	else if (strEQ(SvPV(*s, na), "hours"))
++	    	else if (strEQ(SvPV(*s, PL_na), "hours"))
+ 		    u = 1;
+-	    	else if (strEQ(SvPV(*s, na), "days"))
++	    	else if (strEQ(SvPV(*s, PL_na), "days"))
+ 		    u = 2;
+ 	    	else
+ 		    croak("Invalid advance unit %d encountered", u);
+@@ -850,10 +854,10 @@ Pack(record)
+ 		}
+     }    	
+ 
+-    a.description = (s = hv_fetch(h, "description", 11, 0)) ? SvPV(*s,na) : 0;
++    a.description = (s = hv_fetch(h, "description", 11, 0)) ? SvPV(*s,PL_na) : 0;
+     if (!a.description)
+         croak("appointments must contain a description");
+-    a.note = (s = hv_fetch(h, "note", 4, 0)) ? SvPV(*s,na) : 0;
++    a.note = (s = hv_fetch(h, "note", 4, 0)) ? SvPV(*s,PL_na) : 0;
+ 
+     if (pack_Appointment(&a, &pibuf, datebook_v1) < 0) {
+ 	croak("pack_Appointment failed");
+@@ -897,7 +901,7 @@ UnpackAppBlock(record)
+     }
+     
+     SvPV(record,len);
+-    if (unpack_AppointmentAppInfo(&a, (CPTR)SvPV(record, na), len)>0) {
++    if (unpack_AppointmentAppInfo(&a, (CPTR)SvPV(record, PL_na), len)>0) {
+ 
+ 		doUnpackCategory(ret, &a.category);
+ 	
+@@ -1023,8 +1027,8 @@ Pack(record)
+     	a.indefinite = 1;
+     }
+     
+-    a.description = (s = hv_fetch(h, "description", 11, 0)) ? SvPV(*s,na) : 0;
+-    a.note = (s = hv_fetch(h, "note", 4, 0)) ? SvPV(*s,na) : 0;
++    a.description = (s = hv_fetch(h, "description", 11, 0)) ? SvPV(*s,PL_na) : 0;
++    a.note = (s = hv_fetch(h, "note", 4, 0)) ? SvPV(*s,PL_na) : 0;
+ 
+     if (pack_ToDo(&a, &pibuf, todo_v1) < 0) {
+ 	croak("pack_ToDo failed");
+@@ -1065,7 +1069,7 @@ UnpackAppBlock(record)
+     }
+     
+     SvPV(record,len);
+-    if (unpack_ToDoAppInfo(&a, (CPTR)SvPV(record, na), len)>0) {
++    if (unpack_ToDoAppInfo(&a, (CPTR)SvPV(record, PL_na), len)>0) {
+ 
+ 	    doUnpackCategory(ret, &a.category);
+ 
+@@ -1160,7 +1164,7 @@ Unpack(record)
+ 	hv_store(ret, "entry", 5, newRV_noinc((SV*)e), 0);
+ 	
+ 	for (i=0;i<19;i++) {
+-	    av_push(e, a.entry[i] ? newSVpv(a.entry[i],0) : &sv_undef);
++	    av_push(e, a.entry[i] ? newSVpv(a.entry[i],0) : &PL_sv_undef);
+ 	}
+ 	    
+ 	hv_store(ret, "showPhone", 9, newSViv(a.showPhone), 0);
+@@ -1200,7 +1204,7 @@ Pack(record)
+ 
+     if ((s = hv_fetch(h, "entry", 5, 0)) && SvOK(*s) && SvRV(*s) && (SvTYPE(av=(AV*)SvRV(*s))==SVt_PVAV))
+     	for (i=0;i<19;i++)
+-    		a.entry[i] = ((s=av_fetch(av, i, 0)) && SvOK(*s)) ? SvPV(*s,na) : 0;
++    		a.entry[i] = ((s=av_fetch(av, i, 0)) && SvOK(*s)) ? SvPV(*s,PL_na) : 0;
+ 	else
+ 		for (i=0;i<19;i++)
+ 			a.entry[i] = 0;
+@@ -1249,7 +1253,7 @@ UnpackAppBlock(record)
+     }
+     
+     SvPV(record,len);
+-    if (unpack_AddressAppInfo(&a, (CPTR)SvPV(record, na), len)>0) {
++    if (unpack_AddressAppInfo(&a, (CPTR)SvPV(record, PL_na), len)>0) {
+     
+ 	    doUnpackCategory(ret, &a.category);
+ 	    
+@@ -1309,13 +1313,13 @@ PackAppBlock(record)
+     a.sortByCompany = (s = hv_fetch(h, "sortByCompany", 13, 0)) ? SvIV(*s) : 0;
+ 
+     if ((s = hv_fetch(h, "label", 5, 0)) && SvOK(*s) && SvRV(*s) && (SvTYPE(av=(AV*)SvRV(*s))==SVt_PVAV))
+-    	for (i=0;i<22;i++) strncpy(a.labels[i], (s=av_fetch(av, i, 0)) ? SvPV(*s,na) : "", 16);
++    	for (i=0;i<22;i++) strncpy(a.labels[i], (s=av_fetch(av, i, 0)) ? SvPV(*s,PL_na) : "", 16);
+ 	else
+ 		for (i=0;i<22;i++) a.labels[i][0] = 0;
+ 	for (i=0;i<22;i++) a.labels[i][15] = 0;
+ 
+     if ((s = hv_fetch(h, "phoneLabel", 10, 0)) && SvOK(*s) && SvRV(*s) && (SvTYPE(av=(AV*)SvRV(*s))==SVt_PVAV))
+-    	for (i=0;i<8;i++) strncpy(a.phoneLabels[i], (s=av_fetch(av, i, 0)) ? SvPV(*s,na) : "", 16);
++    	for (i=0;i<8;i++) strncpy(a.phoneLabels[i], (s=av_fetch(av, i, 0)) ? SvPV(*s,PL_na) : "", 16);
+ 	else
+ 		for (i=0;i<8;i++) a.phoneLabels[i][0] = 0;
+ 	for (i=0;i<8;i++) a.phoneLabels[i][15] = 0;
+@@ -1396,7 +1400,7 @@ Pack(record)
+     else {
+     
+     if ((s = hv_fetch(h, "text", 4, 0)))
+-	    a.text = SvPV(*s,na);
++	    a.text = SvPV(*s,PL_na);
+ 	else
+ 		a.text = 0;
+     
+@@ -1438,7 +1442,7 @@ UnpackAppBlock(record)
+     }
+     
+     SvPV(record,len);
+-    if (unpack_MemoAppInfo(&a, (CPTR)SvPV(record, na), len)>0) {
++    if (unpack_MemoAppInfo(&a, (CPTR)SvPV(record, PL_na), len)>0) {
+ 
+ 	    doUnpackCategory(ret, &a.category);
+ 
+@@ -1510,7 +1514,7 @@ Unpack(record)
+     
+     SvPV(record,len);
+     if (len > 0) { /* len == 0 if deleted flag is set */
+-	if (unpack_Expense(&e, (CPTR)SvPV(record, na), len)>0) {
++	if (unpack_Expense(&e, (CPTR)SvPV(record, PL_na), len)>0) {
+ 
+ 	    hv_store(ret, "date", 4, newRV_noinc((SV*)tmtoav(&e.date)), 0);
+ 	    hv_store(ret, "type", 4, newSVlist(e.type,ExpenseTypeNames),0);
+@@ -1570,15 +1574,15 @@ Pack(record)
+     	avtotm((AV*)SvRV(*s), &e.date);
+     else
+     	croak("expense record must contain date");
+-    if ((s = hv_fetch(h, "amount", 6, 0))) e.amount = SvPV(*s,na);
++    if ((s = hv_fetch(h, "amount", 6, 0))) e.amount = SvPV(*s,PL_na);
+ 	else e.amount = 0;
+-    if ((s = hv_fetch(h, "vendor", 6, 0))) e.vendor = SvPV(*s,na);
++    if ((s = hv_fetch(h, "vendor", 6, 0))) e.vendor = SvPV(*s,PL_na);
+ 	else e.vendor = 0;
+-    if ((s = hv_fetch(h, "city", 4, 0))) e.city = SvPV(*s,na);
++    if ((s = hv_fetch(h, "city", 4, 0))) e.city = SvPV(*s,PL_na);
+ 	else e.city = 0;
+-    if ((s = hv_fetch(h, "attendess", 9, 0))) e.attendees = SvPV(*s,na);
++    if ((s = hv_fetch(h, "attendess", 9, 0))) e.attendees = SvPV(*s,PL_na);
+ 	else e.attendees = 0;
+-    if ((s = hv_fetch(h, "note", 4, 0))) e.note = SvPV(*s,na);
++    if ((s = hv_fetch(h, "note", 4, 0))) e.note = SvPV(*s,PL_na);
+ 	else e.note = 0;
+     
+     len = pack_Expense(&e, mybuf, 0xffff);
+@@ -1619,7 +1623,7 @@ UnpackAppBlock(record)
+     }
+     
+     SvPV(record,len);
+-    if (unpack_ExpenseAppInfo(&e, (CPTR)SvPV(record, na), len)>0) {
++    if (unpack_ExpenseAppInfo(&e, (CPTR)SvPV(record, PL_na), len)>0) {
+ 
+ 		hv_store(ret, "sortOrder", 9, newSVlist(e.sortOrder,ExpenseSortNames),0);
+ 		a = newAV();
+@@ -1662,15 +1666,15 @@ PackAppBlock(record)
+ 			HV * hv;
+ 			if ((s=av_fetch(av, i, 0)) && SvOK(*s) && SvRV(*s) && (SvTYPE(hv=(HV*)SvRV(*s))==SVt_PVHV)) {
+ 				if (s = hv_fetch(hv, "name", 4, 0)) {
+-					strncpy(e.currencies[i].name, SvPV(*s, na), 16);
++					strncpy(e.currencies[i].name, SvPV(*s, PL_na), 16);
+ 					e.currencies[i].name[15] = 0;
+ 				}
+ 				if (s = hv_fetch(hv, "symbol", 6, 0)) {
+-					strncpy(e.currencies[i].symbol, SvPV(*s, na), 4);
++					strncpy(e.currencies[i].symbol, SvPV(*s, PL_na), 4);
+ 					e.currencies[i].symbol[3] = 0;
+ 				}
+ 				if (s = hv_fetch(hv, "rate", 4, 0)) {
+-					strncpy(e.currencies[i].rate, SvPV(*s, na), 8);
++					strncpy(e.currencies[i].rate, SvPV(*s, PL_na), 8);
+ 					e.currencies[i].rate[7] = 0;
+ 				}
+ 			}
+@@ -1718,7 +1722,7 @@ UnpackPref(record)
+     }
+     
+     SvPV(record,len);
+-    if (unpack_ExpensePref(&a, (CPTR)SvPV(record, na), len)>0) {
++    if (unpack_ExpensePref(&a, (CPTR)SvPV(record, PL_na), len)>0) {
+ 
+ 	    hv_store(ret, "unitOfDistance", 14, newSVlist(a.unitOfDistance, ExpenseDistanceNames), 0);
+ 	    hv_store(ret, "currentCategory", 15, newSViv(a.currentCategory), 0);
+@@ -1811,7 +1815,7 @@ Unpack(record)
+     
+     SvPV(record,len);
+     if (len > 0) { /* len == 0 if deleted flag is set */
+-	if (unpack_Mail(&a, (CPTR)SvPV(record, na), len)>0) {
++	if (unpack_Mail(&a, (CPTR)SvPV(record, PL_na), len)>0) {
+     
+ 	    if (a.subject) hv_store(ret, "subject", 7, newSVpv(a.subject,0), 0);
+ 	    if (a.from) hv_store(ret, "from", 4, newSVpv(a.from,0), 0);
+@@ -1858,14 +1862,14 @@ Pack(record)
+     }
+     else {
+     
+-    a.subject = (s = hv_fetch(h, "subject", 7, 0)) ? SvPV(*s,na) : 0;
+-    a.from = (s = hv_fetch(h, "from", 4, 0)) ? SvPV(*s,na) : 0;
+-    a.to = (s = hv_fetch(h, "to", 2, 0)) ? SvPV(*s,na) : 0;
+-    a.cc = (s = hv_fetch(h, "cc", 2, 0)) ? SvPV(*s,na) : 0;
+-    a.bcc = (s = hv_fetch(h, "bcc", 3, 0)) ? SvPV(*s,na) : 0;
+-    a.replyTo = (s = hv_fetch(h, "replyTo", 7, 0)) ? SvPV(*s,na) : 0;
+-    a.sentTo = (s = hv_fetch(h, "sentTo", 6, 0)) ? SvPV(*s,na) : 0;
+-    a.body = (s = hv_fetch(h, "body", 4, 0)) ? SvPV(*s,na) : 0;
++    a.subject = (s = hv_fetch(h, "subject", 7, 0)) ? SvPV(*s,PL_na) : 0;
++    a.from = (s = hv_fetch(h, "from", 4, 0)) ? SvPV(*s,PL_na) : 0;
++    a.to = (s = hv_fetch(h, "to", 2, 0)) ? SvPV(*s,PL_na) : 0;
++    a.cc = (s = hv_fetch(h, "cc", 2, 0)) ? SvPV(*s,PL_na) : 0;
++    a.bcc = (s = hv_fetch(h, "bcc", 3, 0)) ? SvPV(*s,PL_na) : 0;
++    a.replyTo = (s = hv_fetch(h, "replyTo", 7, 0)) ? SvPV(*s,PL_na) : 0;
++    a.sentTo = (s = hv_fetch(h, "sentTo", 6, 0)) ? SvPV(*s,PL_na) : 0;
++    a.body = (s = hv_fetch(h, "body", 4, 0)) ? SvPV(*s,PL_na) : 0;
+     
+     a.read = (s = hv_fetch(h, "read", 4, 0)) ? SvIV(*s) : 0;
+     a.signature = (s = hv_fetch(h, "signature", 9, 0)) ? SvIV(*s) : 0;
+@@ -1913,7 +1917,7 @@ UnpackAppBlock(record)
+     }
+     
+     SvPV(record,len);
+-    if (unpack_MailAppInfo(&a, (CPTR)SvPV(record, na), len)>0) {
++    if (unpack_MailAppInfo(&a, (CPTR)SvPV(record, PL_na), len)>0) {
+ 
+ 	    doUnpackCategory(ret, &a.category);
+ 
+@@ -1989,7 +1993,7 @@ UnpackSyncPref(record)
+     }
+     
+     SvPV(record,len);
+-    if (unpack_MailSyncPref(&a, (CPTR)SvPV(record, na), len)>0) {
++    if (unpack_MailSyncPref(&a, (CPTR)SvPV(record, PL_na), len)>0) {
+ 
+ 	    hv_store(ret, "syncType", 8, newSVlist(a.syncType, MailSyncTypeNames), 0);
+ 	    hv_store(ret, "getHigh", 7, newSViv(a.getHigh), 0);
+@@ -2033,9 +2037,9 @@ PackSyncPref(record, id)
+ 	a.getContaining = (s=hv_fetch(h,"getContaining",13,0)) ? SvIV(*s) : 0;
+ 	a.truncate = (s=hv_fetch(h,"truncate",8,0)) ? SvIV(*s) : 0;
+ 
+-	a.filterTo = (s=hv_fetch(h,"filterTo",8,0)) ? SvPV(*s,na) : 0;
+-	a.filterFrom = (s=hv_fetch(h,"filterFrom",10,0)) ? SvPV(*s,na) : 0;
+-	a.filterSubject = (s=hv_fetch(h,"filterSubject",13,0)) ? SvPV(*s,na) : 0;
++	a.filterTo = (s=hv_fetch(h,"filterTo",8,0)) ? SvPV(*s,PL_na) : 0;
++	a.filterFrom = (s=hv_fetch(h,"filterFrom",10,0)) ? SvPV(*s,PL_na) : 0;
++	a.filterSubject = (s=hv_fetch(h,"filterSubject",13,0)) ? SvPV(*s,PL_na) : 0;
+ 
+     len = pack_MailSyncPref(&a, mybuf, 0xffff);
+ 
+@@ -2073,7 +2077,7 @@ UnpackSignaturePref(record)
+     }
+     
+     SvPV(record,len);
+-    if (unpack_MailSignaturePref(&a, (CPTR)SvPV(record, na), len)>0) {
++    if (unpack_MailSignaturePref(&a, (CPTR)SvPV(record, PL_na), len)>0) {
+   
+ 	    if (a.signature)  
+ 		    hv_store(ret, "signature", 9, newSVpv(a.signature, 0), 0);
+@@ -2099,7 +2103,7 @@ PackSignaturePref(record, id)
+     	RETVAL = record;
+     else {
+ 
+-	a.signature = (s=hv_fetch(h,"signature",9,0)) ? SvPV(*s,na) : 0;
++	a.signature = (s=hv_fetch(h,"signature",9,0)) ? SvPV(*s,PL_na) : 0;
+ 
+     len = pack_MailSignaturePref(&a, mybuf, 0xffff);
+ 
+@@ -2129,7 +2133,7 @@ write(socket, msg)
+ 	{
+ 	    STRLEN len;
+ 	    SvPV(msg, len);
+-		RETVAL = pi_write(socket,SvPV(msg,na),len);
++		RETVAL = pi_write(socket,SvPV(msg,PL_na),len);
+ 	}
+ 
+ SV *
+@@ -2146,7 +2150,7 @@ read(socket, len)
+ 	    if (result >=0) 
+ 	    	RETVAL = newSVpvn((char *) pibuf.data, result);
+ 	    else
+-	    	RETVAL = &sv_undef;
++	    	RETVAL = &PL_sv_undef;
+ 	}
+ 	OUTPUT:
+ 	RETVAL
+@@ -2282,7 +2286,7 @@ class(self, name=0)
+ 				croak("DBClasses doesn't exist");
+ 			if (SvOK(name)) {
+ 				(void)SvPV(name,len);
+-				s = hv_fetch(h, SvPV(name,na), len, 0);
++				s = hv_fetch(h, SvPV(name,PL_na), len, 0);
+ 			}
+ 			if (!s)
+ 				s = hv_fetch(h, "", 0, 0);
+@@ -2577,7 +2581,7 @@ getRecords(self)
+ 	{
+ 		int result = dlp_ReadOpenDBInfo(self->socket, self->handle, &RETVAL);
+ 		if (result < 0) {
+-			RETVAL = newSVsv(&sv_undef);
++			RETVAL = newSVsv(&PL_sv_undef);
+ 			self->errnop = result;
+ 		}
+ 	}
+@@ -2745,7 +2749,7 @@ setResource(self, data)
+ 		result = dlp_WriteResource(self->socket, self->handle, type, id, c, len);
+ 		if (result < 0) {
+ 			self->errnop = result;
+-			RETVAL = newSVsv(&sv_undef);
++			RETVAL = newSVsv(&PL_sv_undef);
+ 		} else
+ 			RETVAL = newSViv(result);
+ 	}
+@@ -2798,7 +2802,7 @@ getPref(self, id=0, backup=1)
+ 		    r = dlp_CloseDB(self->socket, self->handle);
+ 	    result = dlp_ReadAppPreference(self->socket, creator, id, backup, 0xFFFF, mybuf, &len, &version);
+ 	    if (pi_version(self->socket)< 0x101)
+-		    r = dlp_OpenDB(self->socket, self->dbcard, self->dbmode, SvPV(self->dbname,na), &self->handle);
++		    r = dlp_OpenDB(self->socket, self->dbcard, self->dbmode, SvPV(self->dbname,PL_na), &self->handle);
+ 	    ReturnReadPref(mybuf, len);
+ 	}
+ 
+@@ -2822,10 +2826,10 @@ setPref(self, data)
+ 	    	r = dlp_CloseDB(self->socket, self->handle);
+ 	    result = dlp_WriteAppPreference(self->socket, creator, id, backup, version, buf, len);
+     	if (pi_version(self->socket)< 0x101)
+-		    r = dlp_OpenDB(self->socket, self->dbcard, self->dbmode, SvPV(self->dbname,na), &self->handle);
++		    r = dlp_OpenDB(self->socket, self->dbcard, self->dbmode, SvPV(self->dbname,PL_na), &self->handle);
+ 		if (result < 0) {
+ 			self->errnop = result;
+-			RETVAL = newSVsv(&sv_undef);
++			RETVAL = newSVsv(&PL_sv_undef);
+ 		} else {
+ 			RETVAL = newSViv(result);
+ 		}
+@@ -2861,7 +2865,7 @@ setPrefRaw(self, data, number, version, 
+ 	    result = dlp_WriteAppPreference(self->socket, creator, number, backup, version, buf, len);
+ 		if (result < 0) {
+ 			self->errnop = result;
+-			RETVAL = newSVsv(&sv_undef);
++			RETVAL = newSVsv(&PL_sv_undef);
+ 		} else {
+ 			RETVAL = newSViv(result);
+ 		}
+@@ -2904,7 +2908,7 @@ getTime(self)
+ 		int result = dlp_GetSysDateTime(self->socket, &t);
+ 		if (result < 0) {
+ 			self->errnop = result;
+-			RETVAL = newSVsv(&sv_undef);
++			RETVAL = newSVsv(&PL_sv_undef);
+ 		} else
+ 			RETVAL = newSViv(t);
+ 	}
+@@ -2929,7 +2933,7 @@ getSysInfo(self)
+ 		int result = dlp_ReadSysInfo(self->socket, &si);
+ 		if (result < 0) {
+ 			self->errnop = result;
+-			RETVAL = newSVsv(&sv_undef);
++			RETVAL = newSVsv(&PL_sv_undef);
+ 		} else {
+ 			HV * i = newHV();
+ 			hv_store(i, "romVersion", 10, newSViv(si.romVersion), 0);\
+@@ -2951,7 +2955,7 @@ getCardInfo(self, cardno=0)
+ 		int result = dlp_ReadStorageInfo(self->socket, cardno, &c);
+ 		if (result < 0) {
+ 			self->errnop = result;
+-			RETVAL = newSVsv(&sv_undef);
++			RETVAL = newSVsv(&PL_sv_undef);
+ 		} else {
+ 			HV * i = newHV();
+ 			hv_store(i, "card", 6, newSViv(c.card), 0);\
+@@ -3037,7 +3041,7 @@ newPref(self, creator, id=0, version=0, 
+ 			croak("Default PrefClass not defined");			
+    		PUSHMARK(sp);										
+    		XPUSHs(newSVsv(*s));								
+-   		XPUSHs(&sv_undef);									
++   		XPUSHs(&PL_sv_undef);									
+     	XPUSHs(sv_2mortal(newSVChar4(creator)));			
+     	if (id)
+ 	    	XPUSHs(id);					
+@@ -3107,7 +3111,7 @@ open(self, name, mode=0, cardno=0)
+ 		result = dlp_OpenDB(self->socket, cardno, nummode, name, &handle);
+ 		if (result<0) {
+ 			self->errnop = result;
+-			RETVAL = &sv_undef;
++			RETVAL = &PL_sv_undef;
+ 		} else {
+ 			int type;
+ 			PDA__Pilot__DLP__DB * x = malloc(sizeof(PDA__Pilot__DLP__DB));
+@@ -3156,7 +3160,7 @@ create(self, name, creator, type, flags,
+ 		int result = dlp_CreateDB(self->socket, creator, type, cardno, flags, version, name, &handle);
+ 		if (result<0) {
+ 			self->errnop = result;
+-			RETVAL = &sv_undef;
++			RETVAL = &PL_sv_undef;
+ 		} else {
+ 			PDA__Pilot__DLP__DB * x = malloc(sizeof(PDA__Pilot__DLP__DB));
+ 			SV * sv = newSViv((IV)(void*)x);
+@@ -3224,7 +3228,7 @@ setPref(self, data)
+ 	    result = dlp_WriteAppPreference(self->socket, creator, id, backup, version, buf, len);
+ 		if (result < 0) {
+ 			self->errnop = result;
+-			RETVAL = newSVsv(&sv_undef);
++			RETVAL = newSVsv(&PL_sv_undef);
+ 		} else {
+ 			RETVAL = newSViv(result);
+ 		}
+@@ -3248,7 +3252,7 @@ setPrefRaw(self, data, creator, number, 
+ 	    result = dlp_WriteAppPreference(self->socket, creator, number, backup, version, buf, len);
+ 		if (result < 0) {
+ 			self->errnop = result;
+-			RETVAL = newSVsv(&sv_undef);
++			RETVAL = newSVsv(&PL_sv_undef);
+ 		} else {
+ 			RETVAL = newSViv(result);
+ 		}
+@@ -3350,7 +3354,7 @@ findDBInfo(self, start, name, creator, t
+ 		else
+ 			t = 0;
+ 		result = dlp_FindDBInfo(self->socket, cardno, start, 
+-			SvOK(name) ? SvPV(name,na) : 0,
++			SvOK(name) ? SvPV(name,PL_na) : 0,
+ 			t, c, &info);
+ 		pack_dbinfo(RETVAL, info, result);
+ 	}
+@@ -3367,7 +3371,7 @@ getFeature(self, creator, number)
+ 		unsigned long f;
+ 		int result;
+ 		if ((result = dlp_ReadFeature(self->socket, creator, number, &f))<0) {
+-			RETVAL = newSVsv(&sv_undef);
++			RETVAL = newSVsv(&PL_sv_undef);
+ 			self->errnop = result;
+ 		} else {
+ 			RETVAL = newSViv(f);
+@@ -3397,7 +3401,7 @@ getROMToken(self,token)
+ 	}
+ 
+ void
+-callApplication(self, creator, type, action, data=&sv_undef)
++callApplication(self, creator, type, action, data=&PL_sv_undef)
+ 	PDA::Pilot::DLP *self
+ 	Char4	creator
+ 	Char4	type
+@@ -3410,7 +3414,7 @@ callApplication(self, creator, type, act
+ 		int result;
+ 		(void)SvPV(data,len);
+ 		result = dlp_CallApplication(self->socket, creator, 
+-				    type, action, len, SvPV(data,na),
++				    type, action, len, SvPV(data,PL_na),
+ 		                    &retcode, &pibuf);
+ 		EXTEND(sp, 2);
+ 		if (result >= 0) {
+@@ -3419,7 +3423,7 @@ callApplication(self, creator, type, act
+ 				PUSHs(sv_2mortal(newSViv(retcode)));
+ 			}
+ 		} else
+-			PUSHs(&sv_undef);
++			PUSHs(&PL_sv_undef);
+ 	}
+ 
+ int
+@@ -3530,7 +3534,7 @@ class(self, name=0)
+ 				croak("DBClasses doesn't exist");
+ 			if (SvOK(name)) {
+ 				(void)SvPV(name, len);
+-				s = hv_fetch(h, SvPV(name, na), len, 0);
++				s = hv_fetch(h, SvPV(name, PL_na), len, 0);
+ 			}
+ 			if (!s)
+ 				s = hv_fetch(h, "", 0, 0);

pilot-link.spec

@@ -1,47 +1,37 @@
-%define support_perl 1
-%define perl_version %(eval "`%{__perl} -V:version`"; echo $version)
+%global perl_version %(eval "`%{__perl} -V:version`"; echo $version)
 
-Name: pilot-link
-Version: 0.12.3
-Release: 13%{?dist}
-Epoch: 2
-License: GPLv2 and GPLv2+ and LGPLv2+ and TCL
-Group: Applications/Communications
 Summary: File transfer utilities between Linux and PalmPilots
+Name: pilot-link
+Version: 0.12.5
+Release: 43%{?dist}
+Epoch: 2
+# libpisock/md5.c       Public Domain
+# libpisock/blob.c      LGPLv2+
+# libpisock/contact.c   GPLv2
+# kittykiller.c         GPLv2+
+License: GPLv2 and GPLv2+ and LGPLv2+ and Public Domain
 URL: http://www.pilot-link.org/
-BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Source0: pilot-link-%{version}.tar.bz2
-Source3: blacklist-visor
-Source4: README.fedora
-Source5: 60-pilot.perms
-Source6: 60-pilot.rules
+Source0: http://downloads.pilot-link.org/%{name}-%{version}.tar.bz2
+Source1: blacklist-visor
+Source2: README.fedora
+Source3: 60-pilot.perms
+Source4: 69-pilot-link.rules
+
+Patch0: pilot-link-0.12.1-var.patch
+Patch1: pilot-link-0.12.2-open.patch
+Patch2: pilot-link-0.12.3-clio.patch
+Patch3: pilot-link-0.12.5-mp.patch
+Patch4: pilot-link-0.12.5-redefinePerlsymbols.patch
+Patch5: pilot-link-0.12.5-compiler_warnings.patch
+Patch6: pilot-link-0.12.5-ftbfs-f19.patch
+Patch7: pilot-link-0.12.5-aarch64.patch
+Patch8: pilot-link-0.12.5-ftbfs-f21.patch
 
 ExcludeArch: s390 s390x
-#Patch1: pilot-link-0.11.0-perlmd5.patch  # May be still applied
-#Patch2: pilot-link-0.11.0-perlpollute.patch  # May be still applied
-#Patch3: pilot-link-0.11.2-malsync.patch  # May be still applied
-Patch4: pilot-link-0.12.1-var.patch 
-Patch6: pilot-link-0.12.2-open.patch
-Patch7: pilot-link-0.12.3-md5.patch
-Patch8: bluetooth-session-register.diff
-Patch9: pilot-link-0.12.2-Zire.patch
-
-
-Requires(post): /sbin/ldconfig
-Requires(postun): /sbin/ldconfig
-
-%if %{support_perl}
-Requires:      perl(:MODULE_COMPAT_%{perl_version})
-BuildRequires: perl(ExtUtils::MakeMaker)
-%endif
-
-BuildRequires: libpng-devel
-BuildRequires: readline-devel
-BuildRequires: autoconf
-BuildRequires: automake
-BuildRequires: libtool
-BuildRequires: libusb-devel
-BuildRequires: bluez-libs-devel
+BuildRequires: gcc
+BuildRequires: perl(ExtUtils::MakeMaker), libpng-devel, readline-devel
+BuildRequires: libusb-devel, bluez-libs-devel, perl-devel, perl-generators, perl(Devel::PPPort)
+Requires: pilot-link-libs = %{epoch}:%{version}-%{release}
 
 %description
 This suite of tools allows you to upload and download programs and
@@ -56,11 +46,8 @@ Hat Linux system.
 
 %package devel
 Summary: PalmPilot development header files
-Group: Development/Libraries
-Requires: %{name} = %{epoch}:%{version}-%{release}
-Requires: libpng-devel
-Requires: readline-devel
-
+Requires: pilot-link-libs = %{epoch}:%{version}-%{release}
+Requires: libpng-devel, readline-devel
 
 %description devel
 This package contains the development headers that are used to build
@@ -70,68 +57,79 @@ necessary to build static pilot applications.
 If you want to develop PalmPilot synchronizing applications, you'll
 need to install pilot-link-devel.
 
-%prep 
+%package perl
+Summary: PalmPilot utilies written in perl
+Requires: %{name} = %{epoch}:%{version}-%{release}
+Requires: perl(:MODULE_COMPAT_%{perl_version})
+
+%description perl
+This package contains utilities that depend on perl
+
+%package libs
+Summary: PalmPilot libraries
+
+%description libs
+Libraries for applications communicating with PalmPilot
+
+%{perl_default_filter}
+
+%prep
 %setup -q
-%patch4 -p1 -b .var
-%if %{support_perl}
-#%patch1 -p1 -b .perlmd5
-#%patch2 -p1 -b .perlpollute
-#%patch3 -p1 -b .malsync
-%endif
-%patch6 -p1 -b .open
-%patch7 -p1 -b .md5
-%patch8 -p0 -b .bluetooth-sdp
-%patch9 -p1 -b .Zire
+%patch0 -p1 -b .var
+%patch1 -p1 -b .open
+%patch2 -p1 -b .clio
+%patch3 -p1 -b .mp
+%patch4 -p1 -b .symbol
+%patch5 -p1 -b .compiler
+%patch6 -p1 -b .ftbfs-f19
+%patch7 -p1 -b .aarch64
+%patch8 -p1 -b .ftbfs-f21
+iconv -f windows-1252 -t UTF8 doc/README.usb > doc/README.usb.aux
+mv doc/README.usb.aux doc/README.usb
+iconv -f windows-1252 -t UTF8 ChangeLog > ChangeLog.aux
+mv ChangeLog.aux ChangeLog
+iconv -f windows-1252 -t UTF8 NEWS > NEWS.aux
+mv NEWS.aux NEWS
 
 %build
-autoreconf -is
-CFLAGS="%{optflags}" %configure \
-  --with-python=no \
-  --with-itcl=no \
-  --with-tk=no \
-  --with-tcl=no \
-  --with-java=no \
-  --with-cpp=yes \
-%if %{support_perl}
-  --with-perl=yes \
-%else
-  --with-perl=no \
-%endif
-  --enable-conduits \
-  --enable-libusb
+%configure \
+    --with-python=no \
+    --with-itcl=no \
+    --with-tk=no \
+    --with-tcl=no \
+    --with-java=no \
+    --with-cpp=yes \
+    --with-perl=yes \
+    --enable-conduits \
+    --enable-libusb
+sed -i 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|g' libtool
+sed -i 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|g' libtool
 
-make
+make %{?_smp_mflags}
 
 %install
-rm -rf %{buildroot}
-
-make install DESTDIR=%{buildroot} libdir=%{_libdir} 
+make install DESTDIR=%{buildroot} libdir=%{_libdir}
 make install -C doc/man DESTDIR=%{buildroot} libdir=%{_libdir}
 
-%if %{support_perl}
 if test -f bindings/Perl/Makefile.PL ; then
-   cd bindings/Perl
-   perl -pi -e 's|^\$libdir =.*|\$libdir = "%{buildroot}%{_libdir}";|g' Makefile.PL
-   CFLAGS="%{optflags}" %{__perl} Makefile.PL INSTALLDIRS=vendor
-   make -B || :
-   make
-   cd ../..
+    cd bindings/Perl
+    perl -pi -e 's|^\$libdir =.*|\$libdir = "%{buildroot}%{_libdir}";|g' Makefile.PL
+    CFLAGS="%{optflags}" %{__perl} Makefile.PL INSTALLDIRS=vendor
+    make -B || :
+    make
+    cd ../..
 fi
-%endif
 
-%if %{support_perl}
-  cd bindings/Perl
-  make pure_install PERL_INSTALL_ROOT=%{buildroot}
-  cd ../..
-  # remove files and fix perms
-  find %{buildroot}%{_libdir}/perl5/ -type f -name '.packlist' -exec rm -f {} \;
-  find %{buildroot}%{_libdir}/perl5/ -type f -name '*.bs' -size 0 -exec rm -f {} \;
-  find %{buildroot}%{_libdir}/perl5/ -type f -name '*.so' -exec chmod 0755 {} \;
-  rm -f %{buildroot}%{_libdir}/perl5/*/*/perllocal.pod
-  rm -f %{buildroot}%{_libdir}/perl5/*/*/*/PDA/dump.pl
-%else
-  rm -f %{buildroot}%{_mandir}/man1/ietf2datebook*
-%endif
+cd bindings/Perl
+make pure_install PERL_INSTALL_ROOT=%{buildroot} %{?_smp_mflags}
+cd ../..
+# remove files and fix perms
+find %{buildroot}%{_libdir}/perl5/ -type f -name '.packlist' -exec rm -f {} \;
+find %{buildroot}%{_libdir}/perl5/ -type f -name '*.bs' -size 0 -exec rm -f {} \;
+find %{buildroot}%{_libdir}/perl5/ -type f -name '*.so' -exec chmod 0755 {} \;
+find %{buildroot}%{_libdir}/perl5/ -type f -name '*.pod' -exec rm -f {} \;
+rm -f %{buildroot}%{_libdir}/perl5/perllocal.pod
+rm -f %{buildroot}%{_libdir}/perl5/*/*/*/PDA/dump.pl
 
 # remove files we don't want to include
 rm -f %{buildroot}%{_libdir}/*.la
@@ -144,43 +142,250 @@ rm -f %{buildroot}%{_bindir}/pilot-prc
 
 # Put visor to blacklist
 mkdir -p %{buildroot}%{_sysconfdir}/modprobe.d/
-install -p -m644 %{SOURCE3} %{buildroot}%{_sysconfdir}/modprobe.d/blacklist-visor
+install -p -m644 %{SOURCE1} %{buildroot}%{_sysconfdir}/modprobe.d/blacklist-visor.conf
 
 # put README.fedora into tree
-cp %{SOURCE4} README.fedora
+cp %{SOURCE2} README.fedora
 
 # install visor configs to share/udev
-install -p -m644 %{SOURCE5} %{buildroot}%{_datadir}/pilot-link/udev
-install -p -m644 %{SOURCE6} %{buildroot}%{_datadir}/pilot-link/udev
+install -p -m644 %{SOURCE3} %{buildroot}%{_datadir}/pilot-link/udev
 
-%post -p /sbin/ldconfig
-
-%postun -p /sbin/ldconfig
-
-%clean
-rm -rf %{buildroot}
+# now that rules are moved out HAL, install to /lib/udev/
+install -d %{buildroot}/lib/udev/rules.d/
+install -p -m644 %{SOURCE4} %{buildroot}/lib/udev/rules.d/
 
 %files
-%defattr(-,root,root,-)
 %doc COPYING ChangeLog README NEWS doc/README.usb doc/README.debugging doc/README.libusb README.fedora
-%{_libdir}/*.so.*
-%if %{support_perl}
-%{perl_vendorarch}/auto/*
-%{perl_vendorarch}/PDA*
-%endif
 %{_bindir}/*
+%exclude %{_bindir}/pilot-ietf2datebook
+%exclude %{_bindir}/pilot-sync-plan
+%exclude %{_bindir}/pilot-undelete
 %{_datadir}/pilot-link
 %{_mandir}/man?/*
-%config(noreplace) %{_sysconfdir}/modprobe.d/blacklist-visor
+%exclude %{_mandir}/man1/ietf2datebook*
 
 %files devel
-%defattr(-,root,root)
 %{_libdir}/*.so
 %{_libdir}/pkgconfig/*
 %{_includedir}/*
 %{_datadir}/aclocal/*.m4
 
+%files perl
+%{_bindir}/pilot-ietf2datebook
+%{_bindir}/pilot-sync-plan
+%{_bindir}/pilot-undelete
+%{_mandir}/man1/ietf2datebook*
+%{perl_vendorarch}/auto/*
+%{perl_vendorarch}/PDA*
+
+%files libs
+%doc COPYING
+%{_libdir}/*.so.*
+%config(noreplace) %{_sysconfdir}/modprobe.d/blacklist-visor.conf
+/lib/udev/rules.d/69-pilot-link.rules
+
 %changelog
+* Fri Jul 26 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2:0.12.5-43
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
+* Thu May 30 2019 Jitka Plesnikova <jplesnik@redhat.com> - 2:0.12.5-42
+- Perl 5.30 rebuild
+
+* Sun Feb 17 2019 Igor Gnatenko <ignatenkobrain@fedoraproject.org> - 2:0.12.5-41
+- Rebuild for readline 8.0
+
+* Sat Feb 02 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2:0.12.5-40
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+
+* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2:0.12.5-39
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
+
+* Sun Jul 01 2018 Jitka Plesnikova <jplesnik@redhat.com> - 2:0.12.5-38
+- Perl 5.28 rebuild
+
+* Thu Jun 28 2018 Nikola Forró <nforro@redhat.com> - 2:0.12.5-37
+- Remove ldconfig from scriptlets
+
+* Wed Jun 27 2018 Jitka Plesnikova <jplesnik@redhat.com> - 2:0.12.5-36
+- Perl 5.28 rebuild
+
+* Tue Feb 20 2018 Nikola Forró <nforro@redhat.com> - 2:0.12.5-35
+- Add missing gcc build dependency
+
+* Fri Feb 09 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2:0.12.5-34
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
+
+* Thu Aug 03 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2:0.12.5-33
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
+
+* Thu Jul 27 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2:0.12.5-32
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
+
+* Sun Jun 04 2017 Jitka Plesnikova <jplesnik@redhat.com> - 2:0.12.5-31
+- Perl 5.26 rebuild
+
+* Sat Feb 11 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2:0.12.5-30
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
+
+* Thu Jan 12 2017 Igor Gnatenko <ignatenko@redhat.com> - 2:0.12.5-29
+- Rebuild for readline 7.x
+
+* Sat May 14 2016 Jitka Plesnikova <jplesnik@redhat.com> - 2:0.12.5-28
+- Perl 5.24 rebuild
+
+* Tue Apr 19 2016 Nikola Forró <nforro@redhat.com> - 2:0.12.5-27
+- Add perl-devel to build dependencies
+
+* Thu Feb 04 2016 Fedora Release Engineering <releng@fedoraproject.org> - 2:0.12.5-26
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
+
+* Thu Jun 18 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2:0.12.5-25
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
+
+* Wed Jun 03 2015 Jitka Plesnikova <jplesnik@redhat.com> - 2:0.12.5-24
+- Perl 5.22 rebuild
+
+* Wed Oct 29 2014 jchaloup <jchaloup@redhat.com> - 2:0.12.5-23
+- Add build dependency on perl(Devel::PPPort)
+  resolves: #1158434
+
+* Tue Aug 26 2014 Jitka Plesnikova <jplesnik@redhat.com> - 2:0.12.5-22
+- Perl 5.20 rebuild
+
+* Sun Aug 17 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2:0.12.5-21
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild
+
+* Sat Jun 07 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2:0.12.5-20
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
+
+* Fri May 09 2014 Peter Schiffer <pschiffe@redhat.com> - 2:0.12.5-19
+- resolves: #1058770
+  fixed FTBFS on F21
+
+* Sun Aug 04 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2:0.12.5-18
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild
+
+* Wed Jul 17 2013 Petr Pisar <ppisar@redhat.com> - 2:0.12.5-17
+- Perl 5.18 rebuild
+
+* Wed Apr 10 2013 Peter Schiffer <pschiffe@redhat.com> - 2:0.12.5-16
+- resolves: #926340
+  added support for aarch64
+- cleaned .spec file
+
+* Mon Feb 25 2013 Peter Schiffer <pschiffe@redhat.com> - 2:0.12.5-15
+- resolves: #914386
+  fixed FTBFS on F19
+
+* Thu Feb 14 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2:0.12.5-14
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
+
+* Sat Jul 21 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2:0.12.5-13
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
+
+* Fri Jun 08 2012 Petr Pisar <ppisar@redhat.com> - 2:0.12.5-12
+- Perl 5.16 rebuild
+
+* Fri Jun 01 2012 Peter Schiffer <pschiffe@redhat.com> - 2:0.12.5-11
+- related: #757011
+  cleaned patch
+- resolves: #733987
+  added requires for pilot-link-libs to pilot-link, removed obsoletes
+  pilot-link from pilot-link-libs
+- resolves: #733989
+  moved udev rules to the libs subpackage, so it could be used without
+  main package
+
+* Fri Jan 13 2012 Peter Schiffer <pschiffe@redhat.com> - 2:0.12.5-10
+- related: #757011
+  fix FTBS on 32bit system
+
+* Thu Jan 12 2012 Peter Schiffer <pschiffe@redhat.com> - 2:0.12.5-9
+- related: #757011
+  fix FTBS
+
+* Tue Dec 06 2011 Adam Jackson <ajax@redhat.com> - 2:0.12.5-8
+- Rebuild for new libpng
+
+* Fri Jun 17 2011 Marcela Mašláňová <mmaslano@redhat.com> - 2:0.12.5-7
+- Perl mass rebuild
+- add patch pilot-link-0.12.5-redefinePerlsymbols.patch - pilot-link was using
+  old POLLUTED symbols, which shouldn't be used anymore 717939
+- added perl_default_filter - don't provide Pilot.so
+
+* Wed Mar 09 2011 Ivana Hutarova Varekova <varekova@redhat.com> - 2:0.12.5-6
+- resolves: #675222
+  install-expenses(1) manpage fix
+
+* Wed Feb 09 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2:0.12.5-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
+
+* Tue Jan  4 2011 Ivana Hutarova Varekova <varekova@redhat.com> - 2:0.12.5-4
+- Resolves: #659292
+  split libraries to a separate package
+
+* Fri Nov 12 2010 Ivana Hutarova Varekova <varekova@redhat.com> - 2:0.12.5-2
+- Resolves: #642435
+  udev rules broken for pilot-link
+
+* Thu Jun 24 2010 Ivana Hutarova Varekova <varekova@redhat.com> - 2:0.12.5-1
+- update to 0.12.5
+
+* Fri Jun 18 2010 Ivana Hutarova Varekova <varekova@redhat.com> - 2:0.12.4-10
+- fix rules configure file (#599640)
+
+* Wed Jun 02 2010 Marcela Maslanova <mmaslano@redhat.com> - 2:0.12.4-9
+- Mass rebuild with perl-5.12.0
+
+* Fri Mar  5 2010 Ivana Hutarova Varekova 2:0.12.4-8
+- remove rpath
+  fix the license tag
+  remove autoreconf and optflags setting
+
+* Tue Jan  5 2010 Jan Gorig <jgorig@redhat.com> 2:0.12.4-7
+- fix build (#551970)
+
+* Fri Dec 18 2009 Ivana Hutarova Varekova <varekova@redhat.com> 2:0.12.4-6
+- fix source tag, add Public Domain license
+
+* Mon Dec  7 2009 Stepan Kasal <skasal@redhat.com> - 2:0.12.4-5
+- rebuild against perl 5.10.1
+
+* Sun Nov 15 2009 Alex Lancaster <alexlan[AT]fedoraproject org> - 2:0.12.4-4
+- Better udev rules, thanks to Kevin Kofler
+
+* Sun Nov 15 2009 Alex Lancaster <alexlan[AT]fedoraproject org> - 2:0.12.4-3
+- Install udev rules again, updated for new ACL handling by udev (#529259)
+
+* Sun Jul 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2:0.12.4-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
+
+* Thu May 28 2009 Ivana Varekova <varekova@redhat.com> - 2:0.12.4-1
+- update to 0.12.4
+- remove obsolete patches
+
+* Wed Apr 15 2009 Ivana Varekova <varekova@redhat.com> - 2:0.12.3-20
+- rename blacklist-visor to blacklist-visor.conf (#494765)
+
+* Thu Feb 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2:0.12.3-19
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
+
+* Tue Sep 23 2008 Ivana Varekova <varekova@redhat.com> - 2:0.12.3-18 
+- extend clio patch - thanks Kevin R. Page
+
+* Fri Sep 19 2008 Ivana Varekova <varekova@redhat.com> - 2:0.12.3-17
+- split perl subpackage (461758) - thanks Peter Robinson
+- spec file cleanup
+
+* Fri Sep 19 2008 Ivana Varekova <varekova@redhat.com> - 2:0.12.3-16
+- add clio patch (454178) - thanks Michael Ekstrand
+
+* Thu Sep 11 2008 - Bastien Nocera <bnocera@redhat.com> - 2:0.12.3-15
+- Rebuild
+
+* Sun Jun 15 2008 Kevin Page <krp[AT]fedoraproject org> - 2:0.12.3-14
+- corrected documentation for visor module use
+
 * Wed Mar 26 2008 Ivana Varekova <varekova@redhat.com> 2:0.12.3-13
 - remove HAL/PolicyKit staff (is in hal package now)
 
@@ -206,7 +411,7 @@ rm -rf %{buildroot}
 
 * Fri Jan 11 2008 Ivana Varekova <varekova@redhat.com> - 2:0.12.3-6
 - Synchronize with F-8 branch:
-- remove visor modul remove from %post script
+- remove visor modul remove from %%post script
 - Change README.fedora use "ttyUSB[13579]" in 60-pilot.rules
 
 * Wed Jan 09 2008 - Bastien Nocera <bnocera@redhat.com> - 2:0.12.3-5
@@ -216,7 +421,7 @@ rm -rf %{buildroot}
 * Mon Jan  7 2008 Alex Lancaster <alexlan[AT]fedoraproject org> - 2:0.12.3-4
 - Synchronize with F-8 branch: 
 - Add README.fedora and visor configs as fallbacks (#280251: thanks Kevin Page)
-- Don't tag HAL/PolicyKit files as %config (#427840)
+- Don't tag HAL/PolicyKit files as %%config (#427840)
 - Remove visor module if currently loaded (#280251)
 
 * Fri Jan  4 2008 Alex Lancaster <alexlan[AT]fedoraproject org> - 2:0.12.3-3
@@ -236,7 +441,7 @@ rm -rf %{buildroot}
 - Enable Perl bindings
 - Include important docs such as README.usb
 
-* Tue Aug 29 2007 Ivana Varekova <varekova@redhat.com> - 2:0.12.2-5
+* Wed Aug 29 2007 Ivana Varekova <varekova@redhat.com> - 2:0.12.2-5
 - Rebuild for selinux ppc32 issue.
 - fix open function calls
 
@@ -420,7 +625,7 @@ rm -rf %{buildroot}
 * Wed Jun 19 2002 Than Ngo <than@redhat.com> 0.9.5-19
 - don't forcibly strip binaries
 
-* Mon Jun 11 2002 Than Ngo <than@redhat.com> 0.9.5-18
+* Tue Jun 11 2002 Than Ngo <than@redhat.com> 0.9.5-18
 - get rid of tcl/tk dependency (bug #66480)
 
 * Wed Jun 05 2002 Than Ngo <than@redhat.com> 0.9.5-17
@@ -522,7 +727,7 @@ rm -rf %{buildroot}
 * Thu Jan 21 1999 Bill Nottingham <notting@redhat.com>
 - arm fix
 
-* Fri Sep 24 1998 Michael Maher <mike@redhat.com>
+* Thu Sep 24 1998 Michael Maher <mike@redhat.com>
 - cleaned up spec file, updated package
 
 * Tue May 19 1998 Michael Maher <mike@redhat.com>

sources

@@ -1 +1 @@
-257124484d50552679c53cae8e118aa3  pilot-link-0.12.3.tar.bz2
+568c55bf504b044f6fbd50baa407c990  pilot-link-0.12.5.tar.bz2