Compare commits

..

No commits in common. "f37" and "master" have entirely different histories.
f37 ... master

9 changed files with 178 additions and 388 deletions

View File

@ -1 +0,0 @@
1

4
.gitignore vendored
View File

@ -9,7 +9,3 @@
/Data-Dumper-2.161.tar.gz
/Data-Dumper-2.172.tar.gz
/Data-Dumper-2.173.tar.gz
/Data-Dumper-2.180.tar.gz
/Data-Dumper-2.181.tar.gz
/Data-Dumper-2.182.tar.gz
/Data-Dumper-2.183.tar.gz

View File

@ -0,0 +1,167 @@
From d9c4b4ae5a1a17347ff5e3ecbf8e1d9da481f476 Mon Sep 17 00:00:00 2001
From: David Mitchell <davem@iabyn.com>
Date: Wed, 3 Apr 2019 13:23:24 +0100
Subject: [PATCH] Data::Dumper - avoid leak on croak
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
v5.21.3-742-g19be3be696 added a facility to Dumper.xs to croak if the
recursion level became too deep (1000 by default).
The trouble with this is that various parts of DD_dump() allocate
temporary SVs and buffers, which will leak if DD_dump() unceremoniously
just croaks().
This currently manifests as dist/Data-Dumper/t/recurse.t failing under
Address Sanitiser.
This commit makes the depth checking code just set a sticky 'too deep'
boolean flag, and
a) on entry, DD_dump() just returns immediately if the flag is set;
b) the flag is checked by the top-level called of DD_dump() and croaks
if set.
So the net effect is to defer croaking until the dump is complete,
and avoid any further recursion once the flag is set.
This is a bit of a quick fix. More long-term solutions would be to
convert DD_dump() to be iterative rather than recursive, and/or make
sure all temporary SVs and buffers are suitably anchored somewhere so
that they get cleaned up on croak.
Petr Písař: Ported from 6d65cb5d847ac93680949c4fa02111808207fbdc in
perl git tree.
Signed-off-by: Petr Písař <ppisar@redhat.com>
---
Dumper.pm | 6 +++---
Dumper.xs | 27 ++++++++++++++++++++-------
2 files changed, 23 insertions(+), 10 deletions(-)
diff --git a/Dumper.pm b/Dumper.pm
index 40aeb7d..06af4c4 100644
--- a/Dumper.pm
+++ b/Dumper.pm
@@ -10,7 +10,7 @@
package Data::Dumper;
BEGIN {
- $VERSION = '2.173'; # Don't forget to set version and release
+ $VERSION = '2.174'; # Don't forget to set version and release
} # date in POD below!
#$| = 1;
@@ -1461,13 +1461,13 @@ be to use the C<Sortkeys> filter of Data::Dumper.
Gurusamy Sarathy gsar@activestate.com
-Copyright (c) 1996-2017 Gurusamy Sarathy. All rights reserved.
+Copyright (c) 1996-2019 Gurusamy Sarathy. All rights reserved.
This program is free software; you can redistribute it and/or
modify it under the same terms as Perl itself.
=head1 VERSION
-Version 2.173
+Version 2.174
=head1 SEE ALSO
diff --git a/Dumper.xs b/Dumper.xs
index 7f0b027..a324cb6 100644
--- a/Dumper.xs
+++ b/Dumper.xs
@@ -61,9 +61,10 @@
#endif
/* This struct contains almost all the user's desired configuration, and it
- * is treated as constant by the recursive function. This arrangement has
- * the advantage of needing less memory than passing all of them on the
- * stack all the time (as was the case in an earlier implementation). */
+ * is treated as mostly constant (except for maxrecursed) by the recursive
+ * function. This arrangement has the advantage of needing less memory
+ * than passing all of them on the stack all the time (as was the case in
+ * an earlier implementation). */
typedef struct {
SV *pad;
SV *xpad;
@@ -74,6 +75,7 @@ typedef struct {
SV *toaster;
SV *bless;
IV maxrecurse;
+ bool maxrecursed; /* at some point we exceeded the maximum recursion level */
I32 indent;
I32 purity;
I32 deepcopy;
@@ -97,7 +99,7 @@ static bool safe_decimal_number(const char *p, STRLEN len);
static SV *sv_x (pTHX_ SV *sv, const char *str, STRLEN len, I32 n);
static I32 DD_dump (pTHX_ SV *val, const char *name, STRLEN namelen, SV *retval,
HV *seenhv, AV *postav, const I32 level, SV *apad,
- const Style *style);
+ Style *style);
#ifndef HvNAME_get
#define HvNAME_get HvNAME
@@ -615,7 +617,7 @@ deparsed_output(pTHX_ SV *val)
*/
static I32
DD_dump(pTHX_ SV *val, const char *name, STRLEN namelen, SV *retval, HV *seenhv,
- AV *postav, const I32 level, SV *apad, const Style *style)
+ AV *postav, const I32 level, SV *apad, Style *style)
{
char tmpbuf[128];
Size_t i;
@@ -642,6 +644,9 @@ DD_dump(pTHX_ SV *val, const char *name, STRLEN namelen, SV *retval, HV *seenhv,
if (!val)
return 0;
+ if (style->maxrecursed)
+ return 0;
+
/* If the output buffer has less than some arbitrary amount of space
remaining, then enlarge it. For the test case (25M of output),
*1.1 was slower, *2.0 was the same, so the first guess of 1.5 is
@@ -793,7 +798,7 @@ DD_dump(pTHX_ SV *val, const char *name, STRLEN namelen, SV *retval, HV *seenhv,
}
if (style->maxrecurse > 0 && level >= style->maxrecurse) {
- croak("Recursion limit of %" IVdf " exceeded", style->maxrecurse);
+ style->maxrecursed = TRUE;
}
if (realpack && !no_bless) { /* we have a blessed ref */
@@ -1528,6 +1533,7 @@ Data_Dumper_Dumpxs(href, ...)
style.indent = 2;
style.quotekeys = 1;
style.maxrecurse = 1000;
+ style.maxrecursed = FALSE;
style.purity = style.deepcopy = style.useqq = style.maxdepth
= style.use_sparse_seen_hash = style.trailingcomma = 0;
style.pad = style.xpad = style.sep = style.pair = style.sortkeys
@@ -1675,7 +1681,7 @@ Data_Dumper_Dumpxs(href, ...)
DD_dump(aTHX_ val, SvPVX_const(name), SvCUR(name), valstr, seenhv,
postav, 0, newapad, &style);
SPAGAIN;
-
+
if (style.indent >= 2 && !terse)
SvREFCNT_dec(newapad);
@@ -1715,6 +1721,13 @@ Data_Dumper_Dumpxs(href, ...)
}
SvREFCNT_dec(postav);
SvREFCNT_dec(valstr);
+
+ /* we defer croaking until here so that temporary SVs and
+ * buffers won't be leaked */
+ if (style.maxrecursed)
+ croak("Recursion limit of %" IVdf " exceeded",
+ style.maxrecurse);
+
}
else
croak("Call to new() method failed to return HASH ref");
--
2.20.1

View File

@ -1,274 +0,0 @@
From d3b09ae0076981fb5ef8a979fa387105278a7234 Mon Sep 17 00:00:00 2001
From: Jitka Plesnikova <jplesnik@redhat.com>
Date: Wed, 11 May 2022 11:01:46 +0200
Subject: [PATCH] Upgrade to 2.184
---
Dumper.pm | 51 +++++++++++++++++++--------------------------------
Dumper.xs | 10 ++++------
t/dumper.t | 52 ++++++++++++++++------------------------------------
3 files changed, 39 insertions(+), 74 deletions(-)
diff --git a/Dumper.pm b/Dumper.pm
index 3b1bb75..ba61ffe 100644
--- a/Dumper.pm
+++ b/Dumper.pm
@@ -29,7 +29,7 @@ our ( $Indent, $Trailingcomma, $Purity, $Pad, $Varname, $Useqq, $Terse, $Freezer
our ( @ISA, @EXPORT, @EXPORT_OK, $VERSION );
BEGIN {
- $VERSION = '2.183'; # Don't forget to set version and release
+ $VERSION = '2.184'; # Don't forget to set version and release
# date in POD below!
@ISA = qw(Exporter);
@@ -740,15 +740,15 @@ my %esc = (
"\e" => "\\e",
);
-my $low_controls = ($IS_ASCII)
-
- # This includes \177, because traditionally it has been
- # output as octal, even though it isn't really a "low"
- # control
- ? qr/[\0-\x1f\177]/
-
- # EBCDIC low controls.
- : qr/[\0-\x3f]/;
+# The low controls are considered to be everything below SPACE, plus the
+# outlier \c? control (but that wasn't properly in existence in early perls,
+# so reconstruct its value here. This abandons EBCDIC support for this
+# character for perls below 5.8)
+my $low_controls = join "", map { quotemeta chr $_ } 0.. (ord(" ") - 1);
+$low_controls .= ($] < 5.008 || $IS_ASCII)
+ ? "\x7f"
+ : chr utf8::unicode_to_native(0x9F);
+my $low_controls_re = qr/[$low_controls]/;
# put a string value in double quotes
sub qquote {
@@ -758,19 +758,10 @@ sub qquote {
# This efficiently changes the high ordinal characters to \x{} if the utf8
# flag is on. On ASCII platforms, the high ordinals are all the
# non-ASCII's. On EBCDIC platforms, we don't include in these the non-ASCII
- # controls whose ordinals are less than SPACE, excluded below by the range
- # \0-\x3f. On ASCII platforms this range just compiles as part of :ascii:.
- # On EBCDIC platforms, there is just one outlier high ordinal control, and
- # it gets output as \x{}.
+ # controls.
my $bytes; { use bytes; $bytes = length }
- s/([^[:ascii:]\0-\x3f])/sprintf("\\x{%x}",ord($1))/ge
- if $bytes > length
-
- # The above doesn't get the EBCDIC outlier high ordinal control when
- # the string is UTF-8 but there are no UTF-8 variant characters in it.
- # We want that to come out as \x{} anyway. We need is_utf8() to do
- # this.
- || (! $IS_ASCII && utf8::is_utf8($_));
+ s/([^[:ascii:]$low_controls])/sprintf("\\x{%x}",ord($1))/ge
+ if $bytes > length;
return qq("$_") unless /[[:^print:]]/; # fast exit if only printables
@@ -779,21 +770,17 @@ sub qquote {
s/([\a\b\t\n\f\r\e])/$esc{$1}/g;
# no need for 3 digits in escape for octals not followed by a digit.
- s/($low_controls)(?!\d)/'\\'.sprintf('%o',ord($1))/eg;
+ s/($low_controls_re)(?!\d)/'\\'.sprintf('%o',ord($1))/eg;
# But otherwise use 3 digits
- s/($low_controls)/'\\'.sprintf('%03o',ord($1))/eg;
+ s/($low_controls_re)/'\\'.sprintf('%03o',ord($1))/eg;
# all but last branch below not supported --BEHAVIOR SUBJECT TO CHANGE--
my $high = shift || "";
if ($high eq "iso8859") { # Doesn't escape the Latin1 printables
- if ($IS_ASCII) {
- s/([\200-\240])/'\\'.sprintf('%o',ord($1))/eg;
- }
- else {
- my $high_control = utf8::unicode_to_native(0x9F);
- s/$high_control/sprintf('\\%o',ord($1))/eg;
- }
+ # Could use /u and [:cntrl:] etc, if khw were confident it worked in
+ # early early perls
+ s/([\200-\240])/'\\'.sprintf('%o',ord($1))/eg if $IS_ASCII;
} elsif ($high eq "utf8") {
# Some discussion of what to do here is in
# https://rt.perl.org/Ticket/Display.html?id=113088
@@ -1461,7 +1448,7 @@ modify it under the same terms as Perl itself.
=head1 VERSION
-Version 2.183
+Version 2.184
=head1 SEE ALSO
diff --git a/Dumper.xs b/Dumper.xs
index 0eaa6c9..8bd6397 100644
--- a/Dumper.xs
+++ b/Dumper.xs
@@ -287,14 +287,13 @@ esc_q_utf8(pTHX_ SV* sv, const char *src, STRLEN slen, I32 do_utf8, I32 useqq)
* outputs the raw char */
normal++;
}
- else { /* Is qq, low ordinal, non-printable. Output escape
- * sequences */
+ else { /* Is qq, non-printable. Output escape sequences */
if ( k == '\a' || k == '\b' || k == '\t' || k == '\n' || k == '\r'
|| k == '\f' || k == ESC_NATIVE)
{
grow += 2; /* 1 char plus backslash */
}
- else /* The other low ordinals are output as an octal escape
+ else /* The other non-printable controls are output as an octal escape
* sequence */
if (s + 1 >= send || isDIGIT(*(s+1))) {
/* When the following character is a digit, use 3 octal digits
@@ -341,9 +340,8 @@ esc_q_utf8(pTHX_ SV* sv, const char *src, STRLEN slen, I32 do_utf8, I32 useqq)
}
/* Here 1) isn't UTF-8; or
- * 2) the current character is ASCII; or
- * 3) it is an EBCDIC platform and is a low ordinal
- * non-ASCII control.
+ * 2) the current character is represented as the same single
+ * byte regardless of the string's UTF-8ness
* In each case the character occupies just one byte */
k = *(U8*)s;
increment = 1;
diff --git a/t/dumper.t b/t/dumper.t
index 3cd86a6..80b2c8e 100644
--- a/t/dumper.t
+++ b/t/dumper.t
@@ -77,8 +77,8 @@ sub convert_to_native {
$index = utf8::unicode_to_native(ord eval "\"$2\"");
# But low hex numbers are always in octal. These are all
- # controls.
- my $format = ($index < ord(" "))
+ # controls. The outlier \c? control is also in octal.
+ my $format = ($index < ord(" ") || $index == ord("\c?"))
? "\\%o"
: "\\x{%x}";
$replacement = sprintf($format, $index);
@@ -1659,8 +1659,8 @@ EOW
# "\\x{41f}",
# qr/\x{8b80}/,
# qr/\x{41f}/,
-# qr/\x{e4}/,
-# '\xE4'
+# qr/\x{b6}/,
+# '\xb6'
#];
EOW
if ($] lt '5.010001') {
@@ -1671,9 +1671,9 @@ EOW
$want =~ s{/(,?)$}{/u$1}mg;
}
my $want_xs = $want;
- $want_xs =~ s/'\xE4'/"\\x{e4}"/;
- $want_xs =~ s<([^\0-\177])> <sprintf '\\x{%x}', ord $1>ge;
- TEST_BOTH(qq(Data::Dumper->Dumpxs([ [qq/\x{41f}/, qr/\x{8b80}/, qr/\x{41f}/, qr/\x{e4}/, "\xE4"] ])),
+ $want_xs =~ s/'\xb6'/"\\x{b6}"/;
+ $want_xs =~ s<([[:^ascii:]])> <sprintf '\\x{%x}', ord $1>ge;
+ TEST_BOTH(qq(Data::Dumper->Dumpxs([ [qq/\x{41f}/, qr/\x{8b80}/, qr/\x{41f}/, qr/\x{b6}/, "\xb6"] ])),
"string with Unicode + regexp with Unicode",
$want, $want_xs);
}
@@ -1715,7 +1715,7 @@ EOW
# qr/ \x{203d}\\/ /,
# qr/ \\\x{203d}\\/ /,
# qr/ \\\x{203d}$bs:\\/ /,
-# '\xA3'
+# '\xB6'
#];
EOW
if ($] lt '5.010001') {
@@ -1726,9 +1726,9 @@ EOW
$want =~ s{/(,?)$}{/u$1}mg;
}
my $want_xs = $want;
- $want_xs =~ s/'\x{A3}'/"\\x{a3}"/;
+ $want_xs =~ s/'\x{B6}'/"\\x{b6}"/;
$want_xs =~ s/\x{203D}/\\x{203d}/g;
- TEST_BOTH(qq(Data::Dumper->Dumpxs([ [ '\x{2e18}', qr! \x{203d}/ !, qr! \\\x{203d}/ !, qr! \\\x{203d}$bs:/ !, "\xa3"] ])),
+ TEST_BOTH(qq(Data::Dumper->Dumpxs([ [ '\x{2e18}', qr! \x{203d}/ !, qr! \\\x{203d}/ !, qr! \\\x{203d}$bs:/ !, "\xb6"] ])),
"github #18614, github #18764, perl #58608 corner cases",
$want, $want_xs);
}
@@ -1743,13 +1743,13 @@ EOW
# qr/^\$/,
# qr/${dollar}foo/,
# qr/\\\$foo/,
-# qr/$dollar \x{A3} /u,
+# qr/$dollar \x{B6} /u,
# qr/$dollar \x{203d} /u,
# qr/\\\$ \x{203d} /u,
# qr/\\\\$dollar \x{203d} /u,
# qr/ \$| \x{203d} /u,
# qr/ (\$) \x{203d} /u,
-# '\xA3'
+# '\xB6'
#];
EOW
if ($] lt '5.014') {
@@ -1760,8 +1760,8 @@ EOW
$want =~ s!/,!)/,!g;
}
my $want_xs = $want;
- $want_xs =~ s/'\x{A3}'/"\\x{a3}"/;
- $want_xs =~ s/\x{A3}/\\x{a3}/;
+ $want_xs =~ s/'\x{B6}'/"\\x{b6}"/;
+ $want_xs =~ s/\x{B6}/\\x{b6}/;
$want_xs =~ s/\x{203D}/\\x{203d}/g;
my $have = <<"EOT";
Data::Dumper->Dumpxs([ [
@@ -1770,13 +1770,13 @@ Data::Dumper->Dumpxs([ [
qr'^\$',
qr'\$foo',
qr/\\\$foo/,
- qr'\$ \x{A3} ',
+ qr'\$ \x{B6} ',
qr'\$ \x{203d} ',
qr/\\\$ \x{203d} /,
qr'\\\\\$ \x{203d} ',
qr/ \$| \x{203d} /,
qr/ (\$) \x{203d} /,
- '\xA3'
+ '\xB6'
] ]);
EOT
TEST_BOTH($have, "CPAN #84569", $want, $want_xs);
@@ -1808,26 +1808,6 @@ EOW
"name of code in *foo",
$want);
}
-#############
-
-{
- # There is special code to handle the single control that in EBCDIC is
- # not in the block with all the other controls, when it is UTF-8 and
- # there are no variants in it (All controls in EBCDIC are invariant.)
- # This tests that. There is no harm in testing this works on ASCII,
- # and is better to not have split code paths.
- my $outlier = chr utf8::unicode_to_native(0x9F);
- my $outlier_hex = sprintf "%x", ord $outlier;
- my $want = <<EOT;
-#\$VAR1 = \"\\x{$outlier_hex}\";
-EOT
- $foo = "$outlier\x{100}";
- chop $foo;
- local $Data::Dumper::Useqq = 1;
- TEST_BOTH (q(Data::Dumper::DumperX($foo)),
- 'EBCDIC outlier control: DumperX',
- $want);
-}
############# [perl #124091]
{
my $want = <<'EOT';
--
2.34.3

View File

@ -1,7 +0,0 @@
--- !Policy
product_versions:
- fedora-*
decision_context: bodhi_update_push_stable
subject_type: koji_build
rules:
- !PassingTestCaseRule {test_case_name: fedora-ci.koji-build.tier0.functional}

View File

@ -1,15 +1,15 @@
%global base_version 2.183
%global base_version 2.173
Name: perl-Data-Dumper
Version: 2.184
Release: 490%{?dist}
Version: 2.174
Release: 457%{?dist}
Summary: Stringify perl data structures, suitable for printing and eval
License: GPL+ or Artistic
URL: https://metacpan.org/release/Data-Dumper
Source0: https://cpan.metacpan.org/authors/id/N/NW/NWCLARK/Data-Dumper-%{base_version}.tar.gz
# Upgrade to 2.184 based on perl-5.35.11
Patch0: Data-Dumper-2.183-Upgrade-to-2.184.patch
BuildRequires: coreutils
Source0: https://cpan.metacpan.org/authors/id/X/XS/XSAWYERX/Data-Dumper-%{base_version}.tar.gz
# Fix a memory leak when croaking about a too deep recursion,
# fixed in perl after 5.29.9
Patch0: Data-Dumper-2.173-Data-Dumper-avoid-leak-on-croak.patch
BuildRequires: findutils
BuildRequires: gcc
BuildRequires: make
@ -19,7 +19,6 @@ BuildRequires: perl-interpreter
BuildRequires: perl(ExtUtils::MakeMaker) >= 6.76
BuildRequires: perl(File::Copy)
BuildRequires: perl(strict)
BuildRequires: perl(warnings)
# perl-Test-Simple is in cycle with perl-Data-Dumper
%if !%{defined perl_bootstrap}
# Run-time:
@ -38,6 +37,7 @@ BuildRequires: perl(overload)
BuildRequires: perl(strict)
BuildRequires: perl(Test::More) >= 0.98
BuildRequires: perl(vars)
BuildRequires: perl(warnings)
# Optional tests:
BuildRequires: perl(Encode)
%endif
@ -49,57 +49,27 @@ Requires: perl(XSLoader)
%{?perl_default_filter}
# Filter modules bundled for tests
%global __provides_exclude_from %{?__provides_exclude_from:%__provides_exclude_from|}^%{_libexecdir}
%global __requires_exclude %{?__requires_exclude:%__requires_exclude|}perl\\(Testing\\)
%description
Given a list of scalars or reference variables, writes out their contents
in perl syntax. The references can also be objects. The content of each
variable is output in a single Perl statement. Handles self-referential
structures correctly.
%package tests
Summary: Tests for %{name}
Requires: %{name} = %{?epoch:%{epoch}:}%{version}-%{release}
Requires: perl(Encode)
Requires: perl-Test-Harness
%description tests
Tests from %{name}. Execute them
with "%{_libexecdir}/%{name}/test".
%prep
%setup -q -n Data-Dumper-%{base_version}
%patch0 -p1
# Help file to recognise the Perl scripts
for F in t/*.t; do
perl -i -MConfig -ple 'print $Config{startperl} if $. == 1 && !s{\A#!.*perl\b}{$Config{startperl}}' "$F"
chmod +x "$F"
done
%build
perl Makefile.PL INSTALLDIRS=vendor NO_PACKLIST=1 NO_PERLLOCAL=1 OPTIMIZE="$RPM_OPT_FLAGS"
%{make_build}
%install
%{make_install}
find %{buildroot} -type f -name '*.bs' -size 0 -delete
%{_fixperms} %{buildroot}/*
# Install tests
mkdir -p %{buildroot}%{_libexecdir}/%{name}
cp -a t %{buildroot}%{_libexecdir}/%{name}
cat > %{buildroot}%{_libexecdir}/%{name}/test << 'EOF'
#!/bin/sh
cd %{_libexecdir}/%{name} && exec prove -I . -j "$(getconf _NPROCESSORS_ONLN)"
EOF
chmod +x %{buildroot}%{_libexecdir}/%{name}/test
find $RPM_BUILD_ROOT -type f -name '*.bs' -size 0 -delete
%{_fixperms} $RPM_BUILD_ROOT/*
%check
%if !%{defined perl_bootstrap}
export HARNESS_OPTIONS=j$(perl -e 'if ($ARGV[0] =~ /.*-j([0-9][0-9]*).*/) {print $1} else {print 1}' -- '%{?_smp_mflags}')
make test
%endif
@ -109,59 +79,7 @@ make test
%{perl_vendorarch}/Data*
%{_mandir}/man3/*
%files tests
%{_libexecdir}/%{name}
%changelog
* Fri Jul 22 2022 Fedora Release Engineering <releng@fedoraproject.org> - 2.184-490
- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
* Fri Jun 03 2022 Jitka Plesnikova <jplesnik@redhat.com> - 2.184-489
- Perl 5.36 re-rebuild of bootstrapped packages
* Mon May 30 2022 Jitka Plesnikova <jplesnik@redhat.com> - 2.184-488
- Increase release to favour standalone package
* Wed May 11 2022 Jitka Plesnikova <jplesnik@redhat.com> - 2.184-1
- Upgrade to 2.184 based on perl-5.35.11
* Fri Jan 21 2022 Fedora Release Engineering <releng@fedoraproject.org> - 2.183-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
* Thu Jul 22 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2.183-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
* Thu Jul 08 2021 Jitka Plesnikova <jplesnik@redhat.com> - 2.183-1
- 2.183 bump
* Thu Jul 01 2021 Jitka Plesnikova <jplesnik@redhat.com> - 2.182-1
- 2.182 bump
* Mon May 31 2021 Jitka Plesnikova <jplesnik@redhat.com> - 2.181-1
- 2.181 bump
* Mon May 24 2021 Jitka Plesnikova <jplesnik@redhat.com> - 2.180-4
- Perl 5.34 re-rebuild of bootstrapped packages
* Mon May 24 2021 Jitka Plesnikova <jplesnik@redhat.com> - 2.180-3
- Perl 5.34 re-rebuild of bootstrapped packages
* Fri May 21 2021 Jitka Plesnikova <jplesnik@redhat.com> - 2.180-2
- Perl 5.34 rebuild
* Mon May 17 2021 Jitka Plesnikova <jplesnik@redhat.com> - 2.180-1
- 2.180 bump
- Package tests
* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2.174-460
- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
* Thu Aug 20 2020 Petr Pisar <ppisar@redhat.com> - 2.174-459
- Fix a memory leak when a magic throws an exception
* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.174-458
- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
* Fri Jun 26 2020 Jitka Plesnikova <jplesnik@redhat.com> - 2.174-457
- Perl 5.32 re-rebuild of bootstrapped packages

View File

@ -1,5 +0,0 @@
summary: Sanity tests
discover:
how: fmf
execute:
how: tmt

View File

@ -1 +1 @@
SHA512 (Data-Dumper-2.183.tar.gz) = b78ff820b9e4a873c69a2097dbe2d7eaeccfab0af4d5d262281a500d42d75abc28943fe671a203a715e31568164da7b6d33825b92ebc92f99e8242efd1e7f65b
SHA512 (Data-Dumper-2.173.tar.gz) = a8d45fdce075bfe8752d423d535cc5279c012c733b0219884204119c9365e93c971858331e74c20df7beaa9b24ad54e1bf9eeb8d8bff53cf21fb88889d7602c2

View File

@ -1,4 +0,0 @@
summary: Upstream tests
component: perl-Data-Dumper
require: perl-Data-Dumper-tests
test: /usr/libexec/perl-Data-Dumper/test