Delay new CK_GCM_PARAMS semantics until fedora 34 unless explicitly enabled.

Also disable building DBM backend

.gitignore

@@ -7,7 +7,45 @@ PayPalEE.cert
 TestCA.ca.cert
 TestUser50.cert
 TestUser51.cert
-/nss-pem-20140125.tar.bz2
 /PayPalRootCA.cert
 /PayPalICA.cert
-/nss-3.20.1.tar.gz
+/nss-3.25.0.tar.gz
+/nss-3.26.0.tar.gz
+/nss-3.27.0.tar.gz
+/nss-3.27.2.tar.gz
+/nss-3.28.1.tar.gz
+/nss-3.29.0.tar.gz
+/nss-3.29.1.tar.gz
+/nss-3.30.0.tar.gz
+/nss-3.30.2.tar.gz
+/nss-3.31.0.tar.gz
+/nss-3.32.0.tar.gz
+/nss-3.32.1.tar.gz
+/nss-3.33.0.tar.gz
+/nss-3.34.0.tar.gz
+/nss-3.35.0.tar.gz
+/nss-3.36.0.tar.gz
+/nss-3.36.1.tar.gz
+/nss-3.37.1.tar.gz
+/nss-3.37.3.tar.gz
+/nss-3.38.0.tar.gz
+/nss-3.39.tar.gz
+/nss-3.40.1.tar.gz
+/nss-3.41.tar.gz
+/nss-3.42.tar.gz
+/nss-3.42.1.tar.gz
+/nss-3.43.tar.gz
+/nss-3.44.tar.gz
+/nss-3.44.1.tar.gz
+/nss-3.45.tar.gz
+/nss-3.46.tar.gz
+/nss-3.46.1.tar.gz
+/nss-3.47.tar.gz
+/nss-3.47.1.tar.gz
+/nss-3.48.tar.gz
+/nss-3.49.tar.gz
+/nss-3.49.2.tar.gz
+/nss-3.50.tar.gz
+/nss-3.51.tar.gz
+/nss-3.51.1.tar.gz
+/nss-3.52.tar.gz

STAGE2-nss

@@ -38,6 +38,11 @@ fi
 
 make -C $SRC/nss-3.*/nss/coreconf
 make -C $SRC/nss-3.*/nss/lib/dbm
+
+# nss/nssinit.c, ssl/sslcon.c, smime/smimeutil.c and ckfw/builtins/binst.c
+# need nss/verref.h which is exported privately, move it to where it can be found.
+(cd $SRC/nss-3.* && mkdir -p dist/private/nss && cp -a nss/verref.h dist/private/nss/)
+
 make -C $SRC/nss-3.*/nss
 cd $SRC/nss-3.*/nss/coreconf
 make install

add-relro-linker-option.patch

@@ -1,16 +0,0 @@
-diff -up nss/coreconf/Linux.mk.relro nss/coreconf/Linux.mk
---- nss/coreconf/Linux.mk.relro	2013-04-09 14:29:45.943228682 -0700
-+++ nss/coreconf/Linux.mk	2013-04-09 14:31:26.194953927 -0700
-@@ -174,6 +174,12 @@ endif
- endif
- endif
- 
-+# harden DSOs/executables a bit against exploits
-+ifeq (2.6,$(firstword $(sort 2.6 $(OS_RELEASE))))
-+DSO_LDOPTS+=-Wl,-z,relro
-+LDFLAGS	+= -Wl,-z,relro
-+endif
-+
- USE_SYSTEM_ZLIB = 1
- ZLIB_LIBS = -lz
- 

disableSSL2libssl.patch

@@ -1,151 +0,0 @@
-diff --git a/lib/ssl/config.mk b/lib/ssl/config.mk
---- a/lib/ssl/config.mk
-+++ b/lib/ssl/config.mk
-@@ -2,16 +2,20 @@
- # This Source Code Form is subject to the terms of the Mozilla Public
- # License, v. 2.0. If a copy of the MPL was not distributed with this
- # file, You can obtain one at http://mozilla.org/MPL/2.0/.
- 
- ifdef NISCC_TEST
- DEFINES += -DNISCC_TEST
- endif
- 
-+ifdef NSS_NO_SSL2_NO_EXPORT
-+DEFINES += -DNSS_NO_SSL2_NO_EXPORT
-+endif
-+
- # Allow build-time configuration of TLS 1.3 (Experimental)
- ifdef NSS_ENABLE_TLS_1_3
- DEFINES += -DNSS_ENABLE_TLS_1_3
- endif
- 
- ifdef NSS_NO_PKCS11_BYPASS
- DEFINES += -DNO_PKCS11_BYPASS
- else
-diff --git a/lib/ssl/sslsock.c b/lib/ssl/sslsock.c
---- a/lib/ssl/sslsock.c
-+++ b/lib/ssl/sslsock.c
-@@ -674,16 +674,22 @@ SSL_OptionSet(PRFileDesc *fd, PRInt32 wh
-         if (ss->cipherSpecs) {
-             PORT_Free(ss->cipherSpecs);
-             ss->cipherSpecs     = NULL;
-             ss->sizeCipherSpecs = 0;
-         }
-         break;
- 
-       case SSL_ENABLE_SSL2:
-+#ifdef NSS_NO_SSL2_NO_EXPORT
-+        if (on) {
-+            PORT_SetError(SSL_ERROR_SSL2_DISABLED);
-+            rv = SECFailure; /* not allowed */
-+        }
-+#else
-         if (IS_DTLS(ss)) {
-             if (on) {
-                 PORT_SetError(SEC_ERROR_INVALID_ARGS);
-                 rv = SECFailure; /* not allowed */
-             }
-             break;
-         }
-         ss->opt.enableSSL2       = on;
-@@ -691,52 +697,67 @@ SSL_OptionSet(PRFileDesc *fd, PRInt32 wh
-             ss->opt.v2CompatibleHello = on;
-         }
-         ss->preferredCipher     = NULL;
-         if (ss->cipherSpecs) {
-             PORT_Free(ss->cipherSpecs);
-             ss->cipherSpecs     = NULL;
-             ss->sizeCipherSpecs = 0;
-         }
-+#endif /* NSS_NO_SSL2_NO_EXPORT */
-         break;
- 
-       case SSL_NO_CACHE:
-         ss->opt.noCache = on;
-         break;
- 
-       case SSL_ENABLE_FDX:
-         if (on && ss->opt.noLocks) {
-             PORT_SetError(SEC_ERROR_INVALID_ARGS);
-             rv = SECFailure;
-         }
-         ss->opt.fdx = on;
-         break;
- 
-       case SSL_V2_COMPATIBLE_HELLO:
-+#ifdef NSS_NO_SSL2_NO_EXPORT
-+        if (on) {
-+            PORT_SetError(SSL_ERROR_SSL2_DISABLED);
-+            rv = SECFailure; /* not allowed */
-+        }
-+#else
-         if (IS_DTLS(ss)) {
-             if (on) {
-                 PORT_SetError(SEC_ERROR_INVALID_ARGS);
-                 rv = SECFailure; /* not allowed */
-             }
-             break;
-         }
-         ss->opt.v2CompatibleHello = on;
-         if (!on) {
-             ss->opt.enableSSL2    = on;
-         }
-+#endif /* NSS_NO_SSL2_NO_EXPORT */
-         break;
- 
-       case SSL_ROLLBACK_DETECTION:
-         ss->opt.detectRollBack = on;
-         break;
- 
-       case SSL_NO_STEP_DOWN:
-+#ifdef NSS_NO_SSL2_NO_EXPORT
-+        if (!on) {
-+            PORT_SetError(SSL_ERROR_SSL2_DISABLED);
-+            rv = SECFailure; /* not allowed */
-+        }
-+#else
-         ss->opt.noStepDown     = on;
-         if (on)
-             SSL_DisableExportCipherSuites(fd);
-+#endif /* NSS_NO_SSL2_NO_EXPORT */
-         break;
- 
-       case SSL_BYPASS_PKCS11:
-         if (ss->handshakeBegun) {
-             PORT_SetError(PR_INVALID_STATE_ERROR);
-             rv = SECFailure;
-         } else {
-             if (PR_FALSE != on) {
-@@ -1163,16 +1184,32 @@ SSL_OptionSetDefault(PRInt32 which, PRBo
-     }
-     return SECSuccess;
- }
- 
- /* function tells us if the cipher suite is one that we no longer support. */
- static PRBool
- ssl_IsRemovedCipherSuite(PRInt32 suite)
- {
-+#ifdef NSS_NO_SSL2_NO_EXPORT
-+    /* both ssl2 and export cipher suites disabled */
-+    if (SSL_IS_SSL2_CIPHER(suite))
-+        return PR_TRUE;
-+    if (SSL_IsExportCipherSuite(suite)) {
-+        SSLCipherSuiteInfo csdef;
-+        if (SSL_GetCipherSuiteInfo(suite, &csdef, sizeof(csdef)) != SECSuccess) {
-+            /* failure to retrieve info, disable */
-+            return PR_TRUE;
-+        }
-+        if (csdef.symCipher != ssl_calg_null) {
-+            /* disable all except NULL ciphersuites */
-+            return PR_TRUE;
-+        }
-+    }
-+#endif /* NSS_NO_SSL2_NO_EXPORT */
-     switch (suite) {
-     case SSL_FORTEZZA_DMS_WITH_NULL_SHA:
-     case SSL_FORTEZZA_DMS_WITH_FORTEZZA_CBC_SHA:
-     case SSL_FORTEZZA_DMS_WITH_RC4_128_SHA:
-         return PR_TRUE;
-     default:
-         return PR_FALSE;
-     }

disableSSL2tests.patch

@@ -1,127 +0,0 @@
-diff --git a/tests/ssl/ssl.sh b/tests/ssl/ssl.sh
---- a/tests/ssl/ssl.sh
-+++ b/tests/ssl/ssl.sh
-@@ -57,19 +57,24 @@ ssl_init()
-   fi
- 
-   PORT=${PORT-8443}
-   NSS_SSL_TESTS=${NSS_SSL_TESTS:-normal_normal}
-   nss_ssl_run="stapling cov auth stress"
-   NSS_SSL_RUN=${NSS_SSL_RUN:-$nss_ssl_run}
- 
-   # Test case files
--  SSLCOV=${QADIR}/ssl/sslcov.txt
-+  if [ "${NSS_NO_SSL2_NO_EXPORT}" = "1" ]; then
-+    SSLCOV=${QADIR}/ssl/sslcov.noSSL2orExport.txt
-+    SSLSTRESS=${QADIR}/ssl/sslstress.noSSL2orExport.txt
-+  else
-+    SSLCOV=${QADIR}/ssl/sslcov.txt
-+    SSLSTRESS=${QADIR}/ssl/sslstress.txt
-+  fi
-   SSLAUTH=${QADIR}/ssl/sslauth.txt
--  SSLSTRESS=${QADIR}/ssl/sslstress.txt
-   REQUEST_FILE=${QADIR}/ssl/sslreq.dat
- 
-   #temparary files
-   SERVEROUTFILE=${TMP}/tests_server.$$
-   SERVERPID=${TMP}/tests_pid.$$
- 
-   R_SERVERPID=../tests_pid.$$
- 
-@@ -115,17 +120,21 @@ is_selfserv_alive()
-   if [ "${OS_ARCH}" = "WINNT" ] && \
-      [ "$OS_NAME" = "CYGWIN_NT" -o "$OS_NAME" = "MINGW32_NT" ]; then
-       PID=${SHELL_SERVERPID}
-   else
-       PID=`cat ${SERVERPID}`
-   fi
- 
-   echo "kill -0 ${PID} >/dev/null 2>/dev/null" 
-+  if [ "${NSS_NO_SSL2_NO_EXPORT}" = "1" ] && [ ${EXP} -eq 0 -o ${SSL2} -eq 0 ]; then
-+  echo "No server to kill"
-+  else
-   kill -0 ${PID} >/dev/null 2>/dev/null || Exit 10 "Fatal - selfserv process not detectable"
-+  fi
- 
-   echo "selfserv with PID ${PID} found at `date`"
- }
- 
- ########################### wait_for_selfserv ##########################
- # local shell function to wait until selfserver is running and initialized
- ########################################################################
- wait_for_selfserv()
-@@ -138,17 +147,21 @@ wait_for_selfserv()
-   if [ $? -ne 0 ]; then
-       sleep 5
-       echo "retrying to connect to selfserv at `date`"
-       echo "tstclnt -p ${PORT} -h ${HOSTADDR} ${CLIENT_OPTIONS} -q \\"
-       echo "        -d ${P_R_CLIENTDIR} -v < ${REQUEST_FILE}"
-       ${BINDIR}/tstclnt -p ${PORT} -h ${HOSTADDR} ${CLIENT_OPTIONS} -q \
-               -d ${P_R_CLIENTDIR} -v < ${REQUEST_FILE}
-       if [ $? -ne 0 ]; then
-+          if [ "${NSS_NO_SSL2_NO_EXPORT}" = "1" ] && [ ${EXP} -eq 0 -o ${SSL2} -eq 0 ]; then
-+              html_passed "Server never started"
-+          else
-           html_failed "Waiting for Server"
-+          fi
-       fi
-   fi
-   is_selfserv_alive
- }
- 
- ########################### kill_selfserv ##############################
- # local shell function to kill the selfserver after the tests are done
- ########################################################################
-@@ -209,25 +222,26 @@ start_selfserv()
-       ECC_OPTIONS=""
-   fi
-   if [ "$1" = "mixed" ]; then
-       ECC_OPTIONS="-e ${HOSTADDR}-ecmixed"
-   fi
-   echo "selfserv starting at `date`"
-   echo "selfserv -D -p ${PORT} -d ${P_R_SERVERDIR} -n ${HOSTADDR} ${SERVER_OPTIONS} \\"
-   echo "         ${ECC_OPTIONS} -S ${HOSTADDR}-dsa -w nss ${sparam} -i ${R_SERVERPID}\\"
--  echo "         $verbose -H 1 &"
-+  echo "         $verbose -H 1 -V ssl3: &"
-   if [ ${fileout} -eq 1 ]; then
-       ${PROFTOOL} ${BINDIR}/selfserv -D -p ${PORT} -d ${P_R_SERVERDIR} -n ${HOSTADDR} ${SERVER_OPTIONS} \
-                ${ECC_OPTIONS} -S ${HOSTADDR}-dsa -w nss ${sparam} -i ${R_SERVERPID} $verbose -H 1 \
--               > ${SERVEROUTFILE} 2>&1 &
-+               -V ssl3:> ${SERVEROUTFILE} 2>&1 &
-       RET=$?
-   else
-       ${PROFTOOL} ${BINDIR}/selfserv -D -p ${PORT} -d ${P_R_SERVERDIR} -n ${HOSTADDR} ${SERVER_OPTIONS} \
--               ${ECC_OPTIONS} -S ${HOSTADDR}-dsa -w nss ${sparam} -i ${R_SERVERPID} $verbose -H 1 &
-+               ${ECC_OPTIONS} -S ${HOSTADDR}-dsa -w nss ${sparam} -i ${R_SERVERPID} $verbose -H 1 \
-+               -V ssl3: &
-       RET=$?
-   fi
- 
-   # The PID $! returned by the MKS or Cygwin shell is not the PID of
-   # the real background process, but rather the PID of a helper
-   # process (sh.exe).  MKS's kill command has a bug: invoking kill
-   # on the helper process does not terminate the real background
-   # process.  Our workaround has been to have selfserv save its PID
-@@ -274,16 +288,22 @@ ssl_cov()
-   exec < ${SSLCOV}
-   while read ectype testmax param testname
-   do
-       echo "${testname}" | grep "EXPORT" > /dev/null 
-       EXP=$?
-       echo "${testname}" | grep "SSL2" > /dev/null
-       SSL2=$?
- 
-+      #  skip export and ssl2 tests when build has disabled SSL2
-+      if [ "${NSS_NO_SSL2_NO_EXPORT}" = "1" ] && [ ${EXP} -eq 0 || ${SSL2} -eq 0 ]; then
-+         echo "yyy exp/ssl2 test skipped: (NSS_NO_SSL2,EXP,SSL2)=(${NSS_NO_SSL2},${EXP},${SSL2})"
-+         continue
-+      fi
-+
-       if [ "${SSL2}" -eq 0 ] ; then
-           # We cannot use asynchronous cert verification with SSL2
-           SSL2_FLAGS=-O
-           VMIN="ssl2"
-       else
-           # Do not enable SSL2 for non-SSL2-specific tests. SSL2 is disabled by
-           # default in libssl but it is enabled by default in tstclnt; we want
-           # to test the libssl default whenever possible.

dummy-sources-for-testing

@@ -1,2 +0,0 @@
-Dummy source file that we by uploading it lets us verify that nss builds
-do not cause the 'fedpkg upload' or 'fedpg new-sources' commands to hang.

iquote.patch

@@ -1,175 +1,13 @@
-diff -up nss/cmd/bltest/Makefile.iquote nss/cmd/bltest/Makefile
---- nss/cmd/bltest/Makefile.iquote	2014-05-01 20:27:18.000000000 -0700
-+++ nss/cmd/bltest/Makefile	2014-05-06 07:15:41.173387799 -0700
-@@ -45,6 +45,7 @@ include $(CORE_DEPTH)/coreconf/rules.mk
- # (6) Execute "component" rules. (OPTIONAL)                           #
- #######################################################################
- 
-+INCLUDES += -iquote $(DIST)/../private/nss
- 
- 
- #######################################################################
-diff -up nss/cmd/certcgi/Makefile.iquote nss/cmd/certcgi/Makefile
---- nss/cmd/certcgi/Makefile.iquote	2014-08-19 10:18:35.713017904 -0700
-+++ nss/cmd/certcgi/Makefile	2014-08-19 10:19:36.106528087 -0700
-@@ -36,7 +36,8 @@ include $(CORE_DEPTH)/coreconf/rules.mk
- # (6) Execute "component" rules. (OPTIONAL)                           #
- #######################################################################
- 
--
-+INCLUDES += -iquote $(DIST)/../public/nss
-+INCLUDES += -iquote $(DIST)/../private/nss
- 
- #######################################################################
- # (7) Execute "local" rules. (OPTIONAL).                              #
-diff -up nss/cmd/certutil/Makefile.iquote nss/cmd/certutil/Makefile
---- nss/cmd/certutil/Makefile.iquote	2014-08-19 10:23:39.697585905 -0700
-+++ nss/cmd/certutil/Makefile	2014-08-19 10:24:31.060019803 -0700
-@@ -37,7 +37,8 @@ include $(CORE_DEPTH)/coreconf/rules.mk
- # (6) Execute "component" rules. (OPTIONAL)                           #
- #######################################################################
- 
--
-+INCLUDES += -iquote $(DIST)/../public/nss
-+INCLUDES += -iquote $(DIST)/../private/nss
- 
- #######################################################################
- # (7) Execute "local" rules. (OPTIONAL).                              #
-diff -up nss/cmd/lib/Makefile.iquote nss/cmd/lib/Makefile
---- nss/cmd/lib/Makefile.iquote	2014-05-01 20:27:18.000000000 -0700
-+++ nss/cmd/lib/Makefile	2014-05-06 07:15:41.174387806 -0700
-@@ -38,7 +38,8 @@ include $(CORE_DEPTH)/coreconf/rules.mk
- # (6) Execute "component" rules. (OPTIONAL)                           #
- #######################################################################
- 
--
-+INCLUDES += -iquote $(DIST)/../private/nss
-+INCLUDES += -iquote $(DIST)/../public/nss
- 
- #######################################################################
- # (7) Execute "local" rules. (OPTIONAL).                              #
-diff -up nss/cmd/modutil/Makefile.iquote nss/cmd/modutil/Makefile
---- nss/cmd/modutil/Makefile.iquote	2014-05-06 07:34:30.055124213 -0700
-+++ nss/cmd/modutil/Makefile	2014-05-06 07:35:36.016602770 -0700
-@@ -41,6 +41,7 @@ include $(CORE_DEPTH)/coreconf/rules.mk
- # (6) Execute "component" rules. (OPTIONAL)                           #
- #######################################################################
- 
-+INCLUDES += -iquote $(DIST)/../public/nss
- 
- 
- #######################################################################
-diff -up nss/cmd/selfserv/Makefile.iquote nss/cmd/selfserv/Makefile
---- nss/cmd/selfserv/Makefile.iquote	2014-05-01 20:27:18.000000000 -0700
-+++ nss/cmd/selfserv/Makefile	2014-05-06 07:15:41.175387813 -0700
-@@ -35,7 +35,8 @@ include $(CORE_DEPTH)/coreconf/rules.mk
- # (6) Execute "component" rules. (OPTIONAL)                           #
- #######################################################################
- 
--
-+INCLUDES += -iquote $(DIST)/../public/nss
-+INCLUDES += -iquote $(DIST)/../private/nss
- 
- #######################################################################
- # (7) Execute "local" rules. (OPTIONAL).                              #
-diff -up nss/cmd/ssltap/Makefile.iquote nss/cmd/ssltap/Makefile
---- nss/cmd/ssltap/Makefile.iquote	2014-05-01 20:27:18.000000000 -0700
-+++ nss/cmd/ssltap/Makefile	2014-05-06 07:15:41.176387820 -0700
-@@ -39,7 +39,8 @@ include $(CORE_DEPTH)/coreconf/rules.mk
- # (6) Execute "component" rules. (OPTIONAL)                           #
- #######################################################################
- 
--
-+INCLUDES += -iquote $(DIST)/../private/nss
-+INCLUDES += -iquote $(DIST)/../public/nss
- 
- #######################################################################
- # (7) Execute "local" rules. (OPTIONAL).                              #
-diff -up nss/cmd/strsclnt/Makefile.iquote nss/cmd/strsclnt/Makefile
---- nss/cmd/strsclnt/Makefile.iquote	2014-05-01 20:27:18.000000000 -0700
-+++ nss/cmd/strsclnt/Makefile	2014-05-06 07:15:41.177387827 -0700
-@@ -36,7 +36,8 @@ include $(CORE_DEPTH)/coreconf/rules.mk
- # (6) Execute "component" rules. (OPTIONAL)                           #
- #######################################################################
- 
--
-+INCLUDES += -iquote $(DIST)/../public/nss
-+INCLUDES += -iquote $(DIST)/../private/nss
- 
- #######################################################################
- # (7) Execute "local" rules. (OPTIONAL).                              #
-diff -up nss/cmd/tstclnt/Makefile.iquote nss/cmd/tstclnt/Makefile
---- nss/cmd/tstclnt/Makefile.iquote	2014-05-01 20:27:18.000000000 -0700
-+++ nss/cmd/tstclnt/Makefile	2014-05-06 07:15:41.178387834 -0700
-@@ -37,6 +37,8 @@ include $(CORE_DEPTH)/coreconf/rules.mk
- #######################################################################
- 
- #include ../platlibs.mk
-+INCLUDES += -iquote $(DIST)/../public/nss
-+INCLUDES += -iquote $(DIST)/../private/nss
- 
- #######################################################################
- # (7) Execute "local" rules. (OPTIONAL).                              #
-diff -up nss/cmd/vfyserv/Makefile.iquote nss/cmd/vfyserv/Makefile
---- nss/cmd/vfyserv/Makefile.iquote	2014-05-01 20:27:18.000000000 -0700
-+++ nss/cmd/vfyserv/Makefile	2014-05-06 07:15:41.179387841 -0700
-@@ -37,6 +37,8 @@ include $(CORE_DEPTH)/coreconf/rules.mk
- #######################################################################
- 
- #include ../platlibs.mk
-+INCLUDES += -iquote $(DIST)/../public/nss
-+INCLUDES += -iquote $(DIST)/../private/nss
- 
- #######################################################################
- # (7) Execute "local" rules. (OPTIONAL).                              #
 diff -up nss/coreconf/location.mk.iquote nss/coreconf/location.mk
---- nss/coreconf/location.mk.iquote	2014-05-01 20:27:18.000000000 -0700
-+++ nss/coreconf/location.mk	2014-05-06 07:15:41.180387848 -0700
-@@ -45,6 +45,10 @@ endif
- 
- ifdef NSS_INCLUDE_DIR
-     INCLUDES += -I$(NSS_INCLUDE_DIR)
-+    ifdef IN_TREE_FREEBL_HEADERS_FIRST
-+        INCLUDES += -iquote $(DIST)/../public/nss
-+        INCLUDES += -iquote $(DIST)/../private/nss
-+    endif
+--- nss/coreconf/location.mk.iquote	2017-07-27 16:09:32.000000000 +0200
++++ nss/coreconf/location.mk	2017-09-06 13:23:14.633611555 +0200
+@@ -75,4 +75,9 @@ ifndef SQLITE_LIB_NAME
+     SQLITE_LIB_NAME = sqlite3
  endif
  
- ifndef NSS_LIB_DIR
-diff -up nss/lib/certhigh/Makefile.iquote nss/lib/certhigh/Makefile
---- nss/lib/certhigh/Makefile.iquote	2014-05-01 20:27:18.000000000 -0700
-+++ nss/lib/certhigh/Makefile	2014-05-06 07:15:41.181387855 -0700
-@@ -38,7 +38,7 @@ include $(CORE_DEPTH)/coreconf/rules.mk
- # (6) Execute "component" rules. (OPTIONAL)                           #
- #######################################################################
- 
--
-+INCLUDES += -iquote $(DIST)/../public/nss
- 
- #######################################################################
- # (7) Execute "local" rules. (OPTIONAL).                              #
-diff -up nss/lib/cryptohi/Makefile.iquote nss/lib/cryptohi/Makefile
---- nss/lib/cryptohi/Makefile.iquote	2014-05-01 20:27:18.000000000 -0700
-+++ nss/lib/cryptohi/Makefile	2014-05-06 07:15:41.182387862 -0700
-@@ -38,7 +38,7 @@ include $(CORE_DEPTH)/coreconf/rules.mk
- # (6) Execute "component" rules. (OPTIONAL)                           #
- #######################################################################
- 
--
-+INCLUDES += -iquote $(DIST)/../public/nss
- 
- #######################################################################
- # (7) Execute "local" rules. (OPTIONAL).                              #
-diff -up nss/lib/nss/Makefile.iquote nss/lib/nss/Makefile
---- nss/lib/nss/Makefile.iquote	2014-05-01 20:27:18.000000000 -0700
-+++ nss/lib/nss/Makefile	2014-05-06 07:15:41.183387869 -0700
-@@ -37,7 +37,8 @@ include $(CORE_DEPTH)/coreconf/rules.mk
- # (6) Execute "component" rules. (OPTIONAL)                           #
- #######################################################################
- 
--
-+INCLUDES += -iquote $(DIST)/../public/nss
-+INCLUDES += -iquote $(DIST)/../private/nss
- 
- #######################################################################
- # (7) Execute "local" rules. (OPTIONAL).                              #
++# Prefer in-tree headers over system headers
++ifdef IN_TREE_FREEBL_HEADERS_FIRST
++    INCLUDES += -iquote $(DIST)/../public/nss -iquote $(DIST)/../private/nss
++endif
++
+ MK_LOCATION = included

nss-3.14.0.0-disble-ocsp-test.patch

@@ -1,11 +0,0 @@
-diff -up nss/tests/chains/scenarios/scenarios.noocsptest nss/tests/chains/scenarios/scenarios
---- nss/tests/chains/scenarios/scenarios.noocsptest	2013-06-27 10:58:08.000000000 -0700
-+++ nss/tests/chains/scenarios/scenarios	2013-07-02 16:13:27.075038930 -0700
-@@ -50,7 +50,6 @@ bridgewithpolicyextensionandmapping.cfg
- realcerts.cfg
- dsa.cfg
- revoc.cfg
--ocsp.cfg
- crldp.cfg
- trustanchors.cfg
- nameconstraints.cfg

nss-539183.patch

@@ -1,11 +1,13 @@
-diff -up nss/cmd/httpserv/httpserv.c.539183 nss/cmd/httpserv/httpserv.c
---- nss/cmd/httpserv/httpserv.c.539183	2013-05-28 14:43:24.000000000 -0700
-+++ nss/cmd/httpserv/httpserv.c	2013-05-30 22:16:46.685373471 -0700
-@@ -661,14 +661,18 @@ getBoundListenSocket(unsigned short port
+--- nss/cmd/httpserv/httpserv.c.539183	2016-05-21 18:31:39.879585420 -0700
++++ nss/cmd/httpserv/httpserv.c	2016-05-21 18:37:22.374464057 -0700
+@@ -953,23 +953,23 @@
+ getBoundListenSocket(unsigned short port)
+ {
+     PRFileDesc *listen_sock;
+     int listenQueueDepth = 5 + (2 * maxThreads);
      PRStatus prStatus;
      PRNetAddr addr;
      PRSocketOptionData opt;
-+    PRUint16           socketDomain = PR_AF_INET;
  
 -    addr.inet.family = PR_AF_INET;
 -    addr.inet.ip = PR_INADDR_ANY;
@@ -15,24 +17,28 @@ diff -up nss/cmd/httpserv/httpserv.c.539183 nss/cmd/httpserv/httpserv.c
 +    }
  
 -    listen_sock = PR_NewTCPSocket();
-+    if (PR_GetEnv("NSS_USE_SDP")) {
-+        socketDomain = PR_AF_INET_SDP;
-+    }
 +    listen_sock = PR_OpenTCPSocket(PR_AF_INET6);
      if (listen_sock == NULL) {
 -        errExit("PR_NewTCPSocket");
-+	errExit("PR_OpenTCPSocket error");
++        errExit("PR_OpenTCPSockett");
      }
  
      opt.option = PR_SockOpt_Nonblocking;
-diff -up nss/cmd/selfserv/selfserv.c.539183 nss/cmd/selfserv/selfserv.c
---- nss/cmd/selfserv/selfserv.c.539183	2013-05-28 14:43:24.000000000 -0700
-+++ nss/cmd/selfserv/selfserv.c	2013-05-30 22:16:46.688373495 -0700
-@@ -1687,14 +1687,18 @@ getBoundListenSocket(unsigned short port
+     opt.value.non_blocking = PR_FALSE;
+     prStatus = PR_SetSocketOption(listen_sock, &opt);
+     if (prStatus < 0) {
+         PR_Close(listen_sock);
+         errExit("PR_SetSocketOption(PR_SockOpt_Nonblocking)");
+--- nss/cmd/selfserv/selfserv.c.539183	2016-05-21 18:31:39.882585367 -0700
++++ nss/cmd/selfserv/selfserv.c	2016-05-21 18:41:43.092801174 -0700
+@@ -1711,23 +1711,23 @@
+ getBoundListenSocket(unsigned short port)
+ {
+     PRFileDesc *listen_sock;
+     int listenQueueDepth = 5 + (2 * maxThreads);
      PRStatus prStatus;
      PRNetAddr addr;
      PRSocketOptionData opt;
-+    PRUint16           socketDomain = PR_AF_INET;
  
 -    addr.inet.family = PR_AF_INET;
 -    addr.inet.ip = PR_INADDR_ANY;
@@ -42,9 +48,6 @@ diff -up nss/cmd/selfserv/selfserv.c.539183 nss/cmd/selfserv/selfserv.c
 +    }
  
 -    listen_sock = PR_NewTCPSocket();
-+    if (PR_GetEnv("NSS_USE_SDP")) {
-+        socketDomain = PR_AF_INET_SDP;
-+    }
 +    listen_sock = PR_OpenTCPSocket(PR_AF_INET6);
      if (listen_sock == NULL) {
 -        errExit("PR_NewTCPSocket");
@@ -52,3 +55,8 @@ diff -up nss/cmd/selfserv/selfserv.c.539183 nss/cmd/selfserv/selfserv.c
      }
  
      opt.option = PR_SockOpt_Nonblocking;
+     opt.value.non_blocking = PR_FALSE;
+     prStatus = PR_SetSocketOption(listen_sock, &opt);
+     if (prStatus < 0) {
+         PR_Close(listen_sock);
+         errExit("PR_SetSocketOption(PR_SockOpt_Nonblocking)");

nss-enable-pem.patch

@@ -1,12 +0,0 @@
-diff -up nss/lib/ckfw/manifest.mn.libpem nss/lib/ckfw/manifest.mn
---- nss/lib/ckfw/manifest.mn.libpem	2013-05-28 14:43:24.000000000 -0700
-+++ nss/lib/ckfw/manifest.mn	2013-05-30 22:14:49.247459672 -0700
-@@ -5,7 +5,7 @@
- 
- CORE_DEPTH = ../..
- 
--DIRS = builtins 
-+DIRS = builtins pem
- 
- PRIVATE_EXPORTS = \
- 	ck.h		  \

nss-gcm-param-default-pkcs11v2.patch

@@ -0,0 +1,21 @@
+diff -up ./lib/util/pkcs11n.h.aes_gcm_pkcs11_v2 ./lib/util/pkcs11n.h
+--- ./lib/util/pkcs11n.h.aes_gcm_pkcs11_v2	2020-05-13 13:44:11.312405744 -0700
++++ ./lib/util/pkcs11n.h	2020-05-13 13:45:23.951723660 -0700
+@@ -605,7 +605,7 @@ typedef struct CK_NSS_GCM_PARAMS {
+ typedef CK_NSS_GCM_PARAMS CK_PTR CK_NSS_GCM_PARAMS_PTR;
+ 
+ /* deprecated #defines. Drop in future NSS releases */
+-#ifdef NSS_PKCS11_2_0_COMPAT
++#ifndef NSS_PKCS11_3_0_STRICT
+ 
+ /* defines that were changed between NSS's PKCS #11 and the Oasis headers */
+ #define CKF_EC_FP CKF_EC_F_P
+@@ -664,7 +664,7 @@ typedef CK_NSS_GCM_PARAMS CK_PTR CK_GCM_
+ #define CKT_NETSCAPE_VALID CKT_NSS_VALID
+ #define CKT_NETSCAPE_VALID_DELEGATOR CKT_NSS_VALID_DELEGATOR
+ #else
+-/* use the new CK_GCM_PARAMS if NSS_PKCS11_2_0_COMPAT is not defined */
++/* use the new CK_GCM_PARAMS if NSS_PKCS11_3_0_STRICT is defined */
+ typedef struct CK_GCM_PARAMS_V3 CK_GCM_PARAMS;
+ typedef CK_GCM_PARAMS_V3 CK_PTR CK_GCM_PARAMS_PTR;
+ #endif

nss-kremlin-ppc64le.patch

@@ -0,0 +1,31 @@
+Index: nss/lib/freebl/verified/kremlin/include/kremlin/internal/types.h
+===================================================================
+--- nss.orig/lib/freebl/verified/kremlin/include/kremlin/internal/types.h
++++ nss/lib/freebl/verified/kremlin/include/kremlin/internal/types.h
+@@ -56,9 +56,10 @@ typedef const char *Prims_string;
+     !defined(__clang__)
+ #include <emmintrin.h>
+ typedef __m128i FStar_UInt128_uint128;
+-#elif !defined(KRML_VERIFIED_UINT128) && !defined(_MSC_VER) &&           \
++#elif !defined(KRML_VERIFIED_UINT128) && !defined(_MSC_VER) && \
+     (defined(__x86_64__) || defined(__x86_64) || defined(__aarch64__) || \
+-     (defined(__powerpc64__) && defined(__LITTLE_ENDIAN__)))
++    (defined(__powerpc64__) && defined(__LITTLE_ENDIAN__)) || \
++     defined(__s390x__))
+ typedef unsigned __int128 FStar_UInt128_uint128;
+ #elif !defined(KRML_VERIFIED_UINT128) && defined(_MSC_VER) && defined(__clang__)
+ typedef __uint128_t FStar_UInt128_uint128;
+Index: nss/lib/freebl/verified/kremlin/kremlib/dist/minimal/fstar_uint128_gcc64.h
+===================================================================
+--- nss.orig/lib/freebl/verified/kremlin/kremlib/dist/minimal/fstar_uint128_gcc64.h
++++ nss/lib/freebl/verified/kremlin/kremlib/dist/minimal/fstar_uint128_gcc64.h
+@@ -26,7 +26,8 @@
+ 
+ #if !defined(KRML_VERIFIED_UINT128) && (!defined(_MSC_VER) || defined(__clang__)) && \
+     (defined(__x86_64__) || defined(__x86_64) || defined(__aarch64__) ||             \
+-     (defined(__powerpc64__) && defined(__LITTLE_ENDIAN__)))
++    (defined(__powerpc64__) && defined(__LITTLE_ENDIAN__)) || \
++     defined(__s390x__))
+ 
+ /* GCC + using native unsigned __int128 support */
+ 

nss-p11-kit.config

@@ -0,0 +1,4 @@
+name=p11-kit-proxy
+library=p11-kit-proxy.so
+
+

nss-signtool-format.patch

@@ -0,0 +1,94 @@
+diff --git a/cmd/modutil/install.c b/cmd/modutil/install.c
+--- a/cmd/modutil/install.c
++++ b/cmd/modutil/install.c
+@@ -825,17 +825,20 @@ rm_dash_r(char *path)
+ 
+         dir = PR_OpenDir(path);
+         if (!dir) {
+             return -1;
+         }
+ 
+         /* Recursively delete all entries in the directory */
+         while ((entry = PR_ReadDir(dir, PR_SKIP_BOTH)) != NULL) {
+-            sprintf(filename, "%s/%s", path, entry->name);
++            if (snprintf(filename, sizeof(filename), "%s/%s", path, entry->name) >= sizeof(filename)) {
++                PR_CloseDir(dir);
++                return -1;
++            }
+             if (rm_dash_r(filename)) {
+                 PR_CloseDir(dir);
+                 return -1;
+             }
+         }
+ 
+         if (PR_CloseDir(dir) != PR_SUCCESS) {
+             return -1;
+diff --git a/cmd/signtool/util.c b/cmd/signtool/util.c
+--- a/cmd/signtool/util.c
++++ b/cmd/signtool/util.c
+@@ -132,17 +132,20 @@ rm_dash_r(char *path)
+         if (!dir) {
+             PR_fprintf(errorFD, "Error: Unable to open directory %s.\n", path);
+             errorCount++;
+             return -1;
+         }
+ 
+         /* Recursively delete all entries in the directory */
+         while ((entry = PR_ReadDir(dir, PR_SKIP_BOTH)) != NULL) {
+-            sprintf(filename, "%s/%s", path, entry->name);
++            if (snprintf(filename, sizeof(filename), "%s/%s", path, entry->name) >= sizeof(filename)) {
++                errorCount++;
++                return -1;
++            }
+             if (rm_dash_r(filename))
+                 return -1;
+         }
+ 
+         if (PR_CloseDir(dir) != PR_SUCCESS) {
+             PR_fprintf(errorFD, "Error: Could not close %s.\n", path);
+             errorCount++;
+             return -1;
+diff --git a/lib/libpkix/pkix/util/pkix_list.c b/lib/libpkix/pkix/util/pkix_list.c
+--- a/lib/libpkix/pkix/util/pkix_list.c
++++ b/lib/libpkix/pkix/util/pkix_list.c
+@@ -1530,17 +1530,17 @@ cleanup:
+  */
+ PKIX_Error *
+ PKIX_List_SetItem(
+         PKIX_List *list,
+         PKIX_UInt32 index,
+         PKIX_PL_Object *item,
+         void *plContext)
+ {
+-        PKIX_List *element;
++        PKIX_List *element = NULL;
+ 
+         PKIX_ENTER(LIST, "PKIX_List_SetItem");
+         PKIX_NULLCHECK_ONE(list);
+ 
+         if (list->immutable){
+                 PKIX_ERROR(PKIX_OPERATIONNOTPERMITTEDONIMMUTABLELIST);
+         }
+ 
+diff --git a/lib/libpkix/pkix_pl_nss/system/pkix_pl_oid.c b/lib/libpkix/pkix_pl_nss/system/pkix_pl_oid.c
+--- a/lib/libpkix/pkix_pl_nss/system/pkix_pl_oid.c
++++ b/lib/libpkix/pkix_pl_nss/system/pkix_pl_oid.c
+@@ -102,17 +102,17 @@ cleanup:
+  */
+ static PKIX_Error *
+ pkix_pl_OID_Equals(
+         PKIX_PL_Object *first,
+         PKIX_PL_Object *second,
+         PKIX_Boolean *pResult,
+         void *plContext)
+ {
+-        PKIX_Int32 cmpResult;
++        PKIX_Int32 cmpResult = 0;
+ 
+         PKIX_ENTER(OID, "pkix_pl_OID_Equals");
+         PKIX_NULLCHECK_THREE(first, second, pResult);
+ 
+         PKIX_CHECK(pkix_pl_OID_Comparator
+                     (first, second, &cmpResult, plContext),
+                     PKIX_OIDCOMPARATORFAILED);
+ 

nss-skip-bltest-and-fipstest.patch

@@ -1,17 +0,0 @@
-diff -up nss/cmd/Makefile.skipthem nss/cmd/Makefile
---- nss/cmd/Makefile.nobltest	2013-05-28 14:43:24.000000000 -0700
-+++ nss/cmd/Makefile	2013-06-15 11:51:11.669655168 -0700
-@@ -14,10 +14,10 @@ ifdef BUILD_LIBPKIX_TESTS
- DIRS += libpkix
- endif
- 
--ifeq ($(NSS_BUILD_WITHOUT_SOFTOKEN),1)
-+ifeq ($(NSS_BLTEST_NOT_AVAILABLE),1)
- BLTEST_SRCDIR =
--FIPSTEST_SRCDIR =
--SHLIBSIGN_SRCDIR =
-+FIPSTEST_SRCDIR =
-+SHLIBSIGN_SRCDIR = shlibsign
- else
- BLTEST_SRCDIR = bltest
- FIPSTEST_SRCDIR = fipstest

nss-softokn-config.in

@@ -0,0 +1,116 @@
+#!/bin/sh
+
+prefix=@prefix@
+
+major_version=@MOD_MAJOR_VERSION@
+minor_version=@MOD_MINOR_VERSION@
+patch_version=@MOD_PATCH_VERSION@
+
+usage()
+{
+	cat <<EOF
+Usage: nss-softokn-config [OPTIONS] [LIBRARIES]
+Options:
+	[--prefix[=DIR]]
+	[--exec-prefix[=DIR]]
+	[--includedir[=DIR]]
+	[--libdir[=DIR]]
+	[--version]
+	[--libs]
+	[--cflags]
+Dynamic Libraries:
+	softokn3 - Requires full dynamic linking
+	freebl3  - for internal use only (and glibc for self-integrity check)
+	nssdbm3  - for internal use only
+Dymamically linked
+EOF
+	exit $1
+}
+
+if test $# -eq 0; then
+	usage 1 1>&2
+fi
+
+while test $# -gt 0; do
+  case "$1" in
+  -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  case $1 in
+    --prefix=*)
+      prefix=$optarg
+      ;;
+    --prefix)
+      echo_prefix=yes
+      ;;
+    --exec-prefix=*)
+      exec_prefix=$optarg
+      ;;
+    --exec-prefix)
+      echo_exec_prefix=yes
+      ;;
+    --includedir=*)
+      includedir=$optarg
+      ;;
+    --includedir)
+      echo_includedir=yes
+      ;;
+    --libdir=*)
+      libdir=$optarg
+      ;;
+    --libdir)
+      echo_libdir=yes
+      ;;
+    --version)
+      echo ${major_version}.${minor_version}.${patch_version}
+      ;;
+    --cflags)
+      echo_cflags=yes
+      ;;
+    --libs)
+      echo_libs=yes
+      ;;
+    *)
+      usage 1 1>&2
+      ;;
+  esac
+  shift
+done
+
+# Set variables that may be dependent upon other variables
+if test -z "$exec_prefix"; then
+    exec_prefix=`pkg-config --variable=exec_prefix nss-softokn`
+fi
+if test -z "$includedir"; then
+    includedir=`pkg-config --variable=includedir nss-softokn`
+fi
+if test -z "$libdir"; then
+    libdir=`pkg-config --variable=libdir nss-softokn`
+fi
+
+if test "$echo_prefix" = "yes"; then
+    echo $prefix
+fi
+
+if test "$echo_exec_prefix" = "yes"; then
+    echo $exec_prefix
+fi
+
+if test "$echo_includedir" = "yes"; then
+    echo $includedir
+fi
+
+if test "$echo_libdir" = "yes"; then
+    echo $libdir
+fi
+
+if test "$echo_cflags" = "yes"; then
+    echo -I$includedir
+fi
+
+if test "$echo_libs" = "yes"; then
+      libdirs="-Wl,-rpath-link,$libdir -L$libdir"
+      echo $libdirs
+fi
+

nss-softokn-dracut-module-setup.sh

@@ -0,0 +1,18 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+    return 255
+}
+
+depends() {
+    return 0
+}
+
+install() {
+    local _dir
+
+    inst_libdir_file libfreeblpriv3.so libfreeblpriv3.chk \
+        libfreebl3.so
+}

nss-softokn-dracut.conf

@@ -0,0 +1,3 @@
+# turn on nss-softokn module
+
+add_dracutmodules+=" nss-softokn "

nss-softokn.pc.in

@@ -0,0 +1,11 @@
+prefix=%prefix%
+exec_prefix=%exec_prefix%
+libdir=%libdir%
+includedir=%includedir%
+
+Name: NSS-SOFTOKN
+Description: Network Security Services Softoken PKCS #11 Module
+Version: %SOFTOKEN_VERSION%
+Requires: nspr >= %NSPR_VERSION%, nss-util >= %NSSUTIL_VERSION%
+Libs: -L${libdir} -lfreebl3 -lnssdbm3 -lsoftokn3
+Cflags: -I${includedir}

nss-ssl-enforce-no-pkcs11-bypass.path

@@ -1,16 +0,0 @@
-diff -up nss/lib/ssl/sslsock.c.nobypass nss/lib/ssl/sslsock.c
---- nss/lib/ssl/sslsock.c.nobypass	2013-05-30 22:23:37.305583715 -0700
-+++ nss/lib/ssl/sslsock.c	2013-05-30 22:23:37.311583762 -0700
-@@ -553,8 +553,10 @@ static PRStatus SSL_BypassRegisterShutdo
- static PRStatus SSL_BypassSetup(void)
- {
- #ifdef NO_PKCS11_BYPASS
--    /* Guarantee binary compatibility */
--    return PR_SUCCESS;
-+    /* No need in our case to guarantee binary compatibility and
-+     * we can safely return failure as we have never supported it
-+     */
-+    return PR_FAILURE;
- #else
-     return PR_CallOnce(&setupBypassOnce, &SSL_BypassRegisterShutdown);
- #endif

nss-util-config.in

@@ -0,0 +1,118 @@
+#!/bin/sh
+
+prefix=@prefix@
+
+major_version=@MOD_MAJOR_VERSION@
+minor_version=@MOD_MINOR_VERSION@
+patch_version=@MOD_PATCH_VERSION@
+
+usage()
+{
+	cat <<EOF
+Usage: nss-util-config [OPTIONS] [LIBRARIES]
+Options:
+	[--prefix[=DIR]]
+	[--exec-prefix[=DIR]]
+	[--includedir[=DIR]]
+	[--libdir[=DIR]]
+	[--version]
+	[--libs]
+	[--cflags]
+Dynamic Libraries:
+	nssutil
+EOF
+	exit $1
+}
+
+if test $# -eq 0; then
+	usage 1 1>&2
+fi
+
+lib_nssutil=yes
+
+while test $# -gt 0; do
+  case "$1" in
+  -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  case $1 in
+    --prefix=*)
+      prefix=$optarg
+      ;;
+    --prefix)
+      echo_prefix=yes
+      ;;
+    --exec-prefix=*)
+      exec_prefix=$optarg
+      ;;
+    --exec-prefix)
+      echo_exec_prefix=yes
+      ;;
+    --includedir=*)
+      includedir=$optarg
+      ;;
+    --includedir)
+      echo_includedir=yes
+      ;;
+    --libdir=*)
+      libdir=$optarg
+      ;;
+    --libdir)
+      echo_libdir=yes
+      ;;
+    --version)
+      echo ${major_version}.${minor_version}.${patch_version}
+      ;;
+    --cflags)
+      echo_cflags=yes
+      ;;
+    --libs)
+      echo_libs=yes
+      ;;
+    *)
+      usage 1 1>&2
+      ;;
+  esac
+  shift
+done
+
+# Set variables that may be dependent upon other variables
+if test -z "$exec_prefix"; then
+    exec_prefix=`pkg-config --variable=exec_prefix nss-util`
+fi
+if test -z "$includedir"; then
+    includedir=`pkg-config --variable=includedir nss-util`
+fi
+if test -z "$libdir"; then
+    libdir=`pkg-config --variable=libdir nss-util`
+fi
+
+if test "$echo_prefix" = "yes"; then
+    echo $prefix
+fi
+
+if test "$echo_exec_prefix" = "yes"; then
+    echo $exec_prefix
+fi
+
+if test "$echo_includedir" = "yes"; then
+    echo $includedir
+fi
+
+if test "$echo_libdir" = "yes"; then
+    echo $libdir
+fi
+
+if test "$echo_cflags" = "yes"; then
+    echo -I$includedir
+fi
+
+if test "$echo_libs" = "yes"; then
+      libdirs="-Wl,-rpath-link,$libdir -L$libdir"
+      if test -n "$lib_nssutil"; then
+	libdirs="$libdirs -lnssutil${major_version}"
+      fi
+      echo $libdirs
+fi
+

nss-util.pc.in

@@ -0,0 +1,11 @@
+prefix=%prefix%
+exec_prefix=%exec_prefix%
+libdir=%libdir%
+includedir=%includedir%
+
+Name: NSS-UTIL
+Description: Network Security Services Utility Library
+Version: %NSSUTIL_VERSION%
+Requires: nspr >= %NSPR_VERSION%
+Libs: -L${libdir} -lnssutil3
+Cflags: -I${includedir}

nsspem-use-system-freebl.patch

@@ -1,80 +0,0 @@
-diff -up nss/lib/ckfw/pem/config.mk.systemfreebl nss/lib/ckfw/pem/config.mk
---- nss/lib/ckfw/pem/config.mk.systemfreebl	2012-08-11 09:06:59.000000000 -0700
-+++ nss/lib/ckfw/pem/config.mk	2013-04-04 16:02:33.805744145 -0700
-@@ -41,6 +41,11 @@ CONFIG_CVS_ID = "@(#) $RCSfile: config.m
- #  are specifed as dependencies within rules.mk.
- #
- 
-+
-+EXTRA_LIBS += \
-+	$(SOFTOKEN_LIB_DIR)/$(LIB_PREFIX)freebl.$(LIB_SUFFIX) \
-+	$(NULL)
-+
- TARGETS        = $(SHARED_LIBRARY)
- LIBRARY        =
- IMPORT_LIBRARY =
-@@ -69,3 +74,22 @@ ifeq ($(OS_TARGET),SunOS)
- MKSHLIB += -R '$$ORIGIN'
- endif
- 
-+# If a platform has a system nssutil, set USE_SYSTEM_NSSUTIL to 1 and
-+# NSSUTIL_LIBS to the linker command-line arguments for the system nssutil
-+# (for example, -lnssutil3 on fedora) in the platform's config file in coreconf.
-+ifdef USE_SYSTEM_NSSUTIL
-+OS_LIBS += $(NSSUTIL_LIBS)
-+else
-+NSSUTIL_LIBS = $(DIST)/lib/$(LIB_PREFIX)nssutil3.$(LIB_SUFFIX)
-+EXTRA_LIBS += $(NSSUTIL_LIBS)
-+endif
-+# If a platform has a system freebl, set USE_SYSTEM_FREEBL to 1 and
-+# FREEBL_LIBS to the linker command-line arguments for the system nssutil
-+# (for example, -lfreebl3 on fedora) in the platform's config file in coreconf.
-+ifdef USE_SYSTEM_FREEBL
-+OS_LIBS += $(FREEBL_LIBS)
-+else
-+FREEBL_LIBS = $(DIST)/lib/$(LIB_PREFIX)freebl3.$(LIB_SUFFIX)
-+EXTRA_LIBS += $(FREEBL_LIBS)
-+endif
-+
-diff -up nss/lib/ckfw/pem/Makefile.systemfreebl nss/lib/ckfw/pem/Makefile
---- nss/lib/ckfw/pem/Makefile.systemfreebl	2012-08-11 09:06:59.000000000 -0700
-+++ nss/lib/ckfw/pem/Makefile	2013-04-04 16:02:33.806744154 -0700
-@@ -43,8 +43,7 @@ include config.mk
- EXTRA_LIBS = \
- 	$(DIST)/lib/$(LIB_PREFIX)nssckfw.$(LIB_SUFFIX) \
- 	$(DIST)/lib/$(LIB_PREFIX)nssb.$(LIB_SUFFIX) \
--	$(DIST)/lib/$(LIB_PREFIX)freebl.$(LIB_SUFFIX) \
--	$(DIST)/lib/$(LIB_PREFIX)nssutil.$(LIB_SUFFIX) \
-+	$(FREEBL_LIB_DIR)/$(LIB_PREFIX)freebl.$(LIB_SUFFIX) \
- 	$(NULL)
- 
- # can't do this in manifest.mn because OS_TARGET isn't defined there.
-@@ -56,6 +55,9 @@ EXTRA_LIBS += \
- 	-lplc4 \
- 	-lplds4 \
- 	-lnspr4 \
-+	-L$(NSSUTIL_LIB_DIR) \
-+	-lnssutil3 \
-+	-lfreebl3
- 	$(NULL)
- else 
- EXTRA_SHARED_LIBS += \
-@@ -74,6 +76,9 @@ EXTRA_LIBS += \
- 	-lplc4 \
- 	-lplds4 \
- 	-lnspr4 \
-+	-L$(NSSUTIL_LIB_DIR) \
-+	-lnssutil3 \
-+	-lfreebl3 \
- 	$(NULL)
- endif
- 
-diff -up nss/lib/ckfw/pem/manifest.mn.systemfreebl nss/lib/ckfw/pem/manifest.mn
---- nss/lib/ckfw/pem/manifest.mn.systemfreebl	2012-08-11 09:06:59.000000000 -0700
-+++ nss/lib/ckfw/pem/manifest.mn	2013-04-04 16:02:33.807744163 -0700
-@@ -65,4 +65,4 @@ REQUIRES = nspr
- 
- LIBRARY_NAME = nsspem
- 
--#EXTRA_SHARED_LIBS = -L$(DIST)/lib -lnssckfw -lnssb -lplc4 -lplds4
-+EXTRA_SHARED_LIBS = -L$(DIST)/lib -lnssckfw -lnssb -lplc4 -lplds4 -L$(NSS_LIB_DIR) -lnssutil3 -lfreebl3 -lsoftokn3

ocsp_stapling_sslauth_sni_tests_client_side_fixes.patch

@@ -1,38 +0,0 @@
-diff -up ./nss/tests/ssl/sslauth.txt.ocsp_sni ./nss/tests/ssl/sslauth.txt
---- ./nss/tests/ssl/sslauth.txt.ocsp_sni	2015-05-28 10:50:45.000000000 -0700
-+++ ./nss/tests/ssl/sslauth.txt	2015-08-30 08:49:22.025299419 -0700
-@@ -65,12 +65,12 @@
- # SNI Tests
- #
-   SNI     0       -r_-a_Host-sni.Dom       -V_ssl3:_-w_nss_-n_TestUser                     TLS Server hello response without SNI
--  SNI     0       -r_-a_Host-sni.Dom       -V_ssl3:_-w_nss_-n_TestUser_-a_Host-sni.Dom     TLS Server hello response with SNI
--  SNI     1       -r_-a_Host-sni.Dom       -V_ssl3:_-w_nss_-n_TestUser_-a_Host-sni1.Dom    TLS Server response with alert
-+  SNI     0       -r_-a_Host-sni.Dom       -V_ssl3:_-c_v_-w_nss_-n_TestUser_-a_Host-sni.Dom     TLS Server hello response with SNI
-+  SNI     1       -r_-a_Host-sni.Dom       -V_ssl3:_-c_v_-w_nss_-n_TestUser_-a_Host-sni1.Dom    TLS Server response with alert
-   SNI     0       -r_-a_Host-sni.Dom       -V_ssl3:ssl3_-w_nss_-n_TestUser                  SSL3 Server hello response without SNI
--  SNI     1       -r_-a_Host-sni.Dom       -V_ssl3:ssl3_-w_nss_-n_TestUser_-a_Host-sni.Dom  SSL3 Server hello response with SNI: SSL don't have SH extensions
-+  SNI     1       -r_-a_Host-sni.Dom       -V_ssl3:_-c_vssl3_-w_nss_-n_TestUser_-a_Host-sni.Dom  SSL3 Server hello response with SNI: SSL don't have SH extensions
-   SNI     0       -r_-r_-r_-a_Host-sni.Dom -V_ssl3:_-w_nss_-n_TestUser                     TLS Server hello response without SNI
--  SNI     0       -r_-r_-r_-a_Host-sni.Dom -V_ssl3:_-w_nss_-n_TestUser_-a_Host-sni.Dom     TLS Server hello response with SNI
-+  SNI     0       -r_-r_-r_-a_Host-sni.Dom -V_ssl3:_-c_v_-w_nss_-n_TestUser_-a_Host-sni.Dom     TLS Server hello response with SNI
-   SNI     1       -r_-r_-r_-a_Host-sni.Dom -V_ssl3:_-w_nss_-n_TestUser_-a_Host-sni.Dom_-a_Host.Dom TLS Server hello response with SNI: Change name on 2d HS
--  SNI     1       -r_-r_-r_-a_Host-sni.Dom -V_ssl3:_-w_nss_-n_TestUser_-a_Host-sni.Dom_-a_Host-sni1.Dom TLS Server hello response with SNI: Change name to invalid 2d HS
--  SNI     1       -r_-r_-r_-a_Host-sni.Dom -V_ssl3:_-w_nss_-n_TestUser_-a_Host-sni1.Dom    TLS Server response with alert
-+  SNI     1       -r_-r_-r_-a_Host-sni.Dom -V_ssl3:_-c_v_-w_nss_-n_TestUser_-a_Host-sni.Dom_-a_Host-sni1.Dom TLS Server hello response with SNI: Change name to invalid 2d HS
-+  SNI     1       -r_-r_-r_-a_Host-sni.Dom -V_ssl3:_-c_v_-w_nss_-n_TestUser_-a_Host-sni1.Dom    TLS Server response with alert
-diff -up ./nss/tests/ssl/ssl.sh.ocsp_sni ./nss/tests/ssl/ssl.sh
---- ./nss/tests/ssl/ssl.sh.ocsp_sni	2015-08-30 08:49:21.905301105 -0700
-+++ ./nss/tests/ssl/ssl.sh	2015-08-30 08:49:22.017299531 -0700
-@@ -457,10 +457,10 @@ ssl_stapling_sub()
-     start_selfserv
- 
-     echo "tstclnt -p ${PORT} -h ${HOSTADDR} -f -d ${P_R_CLIENTDIR} -v ${CLIENT_OPTIONS} \\"
--    echo "        -T -O -F -M 1 -V ssl3: < ${REQUEST_FILE}"
-+    echo "        -c v -T -O -F -M 1 -V ssl3: < ${REQUEST_FILE}"
-     rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
-     ${PROFTOOL} ${BINDIR}/tstclnt -p ${PORT} -h ${HOSTADDR} -f ${CLIENT_OPTIONS} \
--	    -d ${P_R_CLIENTDIR} -v -T -O -F -M 1 -V ssl3: < ${REQUEST_FILE} \
-+	    -d ${P_R_CLIENTDIR} -v -c v -T -O -F -M 1 -V ssl3: < ${REQUEST_FILE} \
- 	    >${TMP}/$HOST.tmp.$$  2>&1
-     ret=$?
-     cat ${TMP}/$HOST.tmp.$$

renegotiate-transitional.patch

@@ -1,12 +0,0 @@
-diff -up nss/lib/ssl/sslsock.c.transitional nss/lib/ssl/sslsock.c
---- nss/lib/ssl/sslsock.c.transitional	2013-05-30 22:10:54.882675807 -0700
-+++ nss/lib/ssl/sslsock.c	2013-05-30 22:12:11.909260024 -0700
-@@ -149,7 +149,7 @@ static sslOptions ssl_defaults = {
-     PR_FALSE,   /* noLocks            */
-     PR_FALSE,   /* enableSessionTickets */
-     PR_FALSE,   /* enableDeflate      */
--    2,          /* enableRenegotiation (default: requires extension) */
-+    3,          /* enableRenegotiation (default: transitional) */
-     PR_FALSE,   /* requireSafeNegotiation */
-     PR_FALSE,   /* enableFalseStart   */
-     PR_TRUE,    /* cbcRandomIV        */

rhbz1185708-enable-ecc-3des-ciphers-by-default.patch

@@ -1,14 +0,0 @@
-diff -up ./nss/lib/ssl/ssl3con.c.1185708_3des ./nss/lib/ssl/ssl3con.c
---- ./nss/lib/ssl/ssl3con.c.1185708_3des	2015-09-29 16:24:18.717593591 -0700
-+++ ./nss/lib/ssl/ssl3con.c	2015-09-29 16:25:22.672879926 -0700
-@@ -101,8 +101,8 @@ static ssl3CipherSuiteCfg cipherSuites[s
-  { TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256, SSL_ALLOWED, PR_TRUE, PR_FALSE},
-  { TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256,   SSL_ALLOWED, PR_TRUE, PR_FALSE},
-  { TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,      SSL_ALLOWED, PR_TRUE, PR_FALSE},
-- { TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA,   SSL_ALLOWED, PR_FALSE, PR_FALSE},
-- { TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,     SSL_ALLOWED, PR_FALSE, PR_FALSE},
-+ { TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA,   SSL_ALLOWED, PR_TRUE, PR_FALSE},
-+ { TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,     SSL_ALLOWED, PR_TRUE, PR_FALSE},
-  { TLS_ECDHE_ECDSA_WITH_RC4_128_SHA,        SSL_ALLOWED, PR_FALSE, PR_FALSE},
-  { TLS_ECDHE_RSA_WITH_RC4_128_SHA,          SSL_ALLOWED, PR_FALSE, PR_FALSE},
- #endif /* NSS_DISABLE_ECC */

rhbz1185708-enable-ecc-ciphers-by-default.patch

@@ -1,39 +0,0 @@
-diff --git a/lib/ssl/ssl3con.c b/lib/ssl/ssl3con.c
---- a/lib/ssl/ssl3con.c
-+++ b/lib/ssl/ssl3con.c
-@@ -85,27 +85,27 @@ static SECStatus ssl3_AESGCMBypass(ssl3K
-  *
-  * Important: See bug 946147 before enabling, reordering, or adding any cipher
-  * suites to this list.
-  */
- static ssl3CipherSuiteCfg cipherSuites[ssl_V3_SUITES_IMPLEMENTED] = {
-    /*      cipher_suite                     policy       enabled   isPresent */
- 
- #ifndef NSS_DISABLE_ECC
-- { TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256, SSL_ALLOWED, PR_FALSE, PR_FALSE},
-- { TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,   SSL_ALLOWED, PR_FALSE, PR_FALSE},
-+ { TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256, SSL_ALLOWED, PR_TRUE, PR_FALSE},
-+ { TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,   SSL_ALLOWED, PR_TRUE, PR_FALSE},
-    /* TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA is out of order to work around
-     * bug 946147.
-     */
-- { TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,    SSL_ALLOWED, PR_FALSE, PR_FALSE},
-- { TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,    SSL_ALLOWED, PR_FALSE, PR_FALSE},
-- { TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,      SSL_ALLOWED, PR_FALSE, PR_FALSE},
-- { TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256, SSL_ALLOWED, PR_FALSE, PR_FALSE},
-- { TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256,   SSL_ALLOWED, PR_FALSE, PR_FALSE},
-- { TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,      SSL_ALLOWED, PR_FALSE, PR_FALSE},
-+ { TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,    SSL_ALLOWED, PR_TRUE, PR_FALSE},
-+ { TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,    SSL_ALLOWED, PR_TRUE, PR_FALSE},
-+ { TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,      SSL_ALLOWED, PR_TRUE, PR_FALSE},
-+ { TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256, SSL_ALLOWED, PR_TRUE, PR_FALSE},
-+ { TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256,   SSL_ALLOWED, PR_TRUE, PR_FALSE},
-+ { TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,      SSL_ALLOWED, PR_TRUE, PR_FALSE},
-  { TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA,   SSL_ALLOWED, PR_FALSE, PR_FALSE},
-  { TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,     SSL_ALLOWED, PR_FALSE, PR_FALSE},
-  { TLS_ECDHE_ECDSA_WITH_RC4_128_SHA,        SSL_ALLOWED, PR_FALSE, PR_FALSE},
-  { TLS_ECDHE_RSA_WITH_RC4_128_SHA,          SSL_ALLOWED, PR_FALSE, PR_FALSE},
- #endif /* NSS_DISABLE_ECC */
- 
-  { TLS_DHE_RSA_WITH_AES_128_GCM_SHA256,     SSL_ALLOWED, PR_TRUE,  PR_FALSE},
-  { TLS_DHE_DSS_WITH_AES_128_GCM_SHA256,     SSL_ALLOWED, PR_FALSE, PR_FALSE},

skip_stress_TLS_RC4_128_with_MD5.patch

@@ -1,52 +0,0 @@
-diff -up ./nss/tests/ssl/sslstress.txt.skip ./nss/tests/ssl/sslstress.txt
---- ./nss/tests/ssl/sslstress.txt.skip	2015-09-11 21:48:21.763187957 -0700
-+++ ./nss/tests/ssl/sslstress.txt	2015-09-11 21:50:10.516514535 -0700
-@@ -8,29 +8,29 @@
- # Enable  return  server     client                         Test Case name
- #  ECC    value   params     params
- # ------- ------  ------     ------                         ---------------
--  noECC     0      _         -c_1000_-C_A                  Stress SSL2 RC4 128 with MD5
--  noECC     0      _         -c_1000_-C_c_-V_:ssl3               Stress SSL3 RC4 128 with MD5
--  noECC     0      _         -c_1000_-C_c                  Stress TLS  RC4 128 with MD5
--  noECC     0      _         -c_1000_-C_c_-g               Stress TLS  RC4 128 with MD5 (false start)
--  noECC     0      -u        -V_ssl3:_-c_1000_-C_c_-u            Stress TLS  RC4 128 with MD5 (session ticket)
--  noECC     0      -z        -V_ssl3:_-c_1000_-C_c_-z            Stress TLS  RC4 128 with MD5 (compression)
--  noECC     0      -u_-z     -V_ssl3:_-c_1000_-C_c_-u_-z         Stress TLS  RC4 128 with MD5 (session ticket, compression)
--  noECC     0      -u_-z     -V_ssl3:_-c_1000_-C_c_-u_-z_-g      Stress TLS  RC4 128 with MD5 (session ticket, compression, false start)
--  SNI       0      -u_-a_Host-sni.Dom -V_tls1.0:_-c_1000_-C_c_-u Stress TLS RC4 128 with MD5 (session ticket, SNI)
-+#  noECC     0      _         -c_1000_-C_A                  Stress SSL2 RC4 128 with MD5
-+#  noECC     0      _         -c_1000_-C_c_-V_:ssl3               Stress SSL3 RC4 128 with MD5
-+#  noECC     0      _         -c_1000_-C_c                  Stress TLS  RC4 128 with MD5
-+#  noECC     0      _         -c_1000_-C_c_-g               Stress TLS  RC4 128 with MD5 (false start)
-+#  noECC     0      -u        -V_ssl3:_-c_1000_-C_c_-u            Stress TLS  RC4 128 with MD5 (session ticket)
-+#  noECC     0      -z        -V_ssl3:_-c_1000_-C_c_-z            Stress TLS  RC4 128 with MD5 (compression)
-+#  noECC     0      -u_-z     -V_ssl3:_-c_1000_-C_c_-u_-z         Stress TLS  RC4 128 with MD5 (session ticket, compression)
-+#  noECC     0      -u_-z     -V_ssl3:_-c_1000_-C_c_-u_-z_-g      Stress TLS  RC4 128 with MD5 (session ticket, compression, false start)
-+#  SNI       0      -u_-a_Host-sni.Dom -V_tls1.0:_-c_1000_-C_c_-u Stress TLS RC4 128 with MD5 (session ticket, SNI)
- 
- #
- # add client auth versions here...
- #
--  noECC     0      -r_-r     -c_100_-C_A_-N_-n_TestUser    Stress SSL2 RC4 128 with MD5 (no reuse, client auth)
--  noECC     0      -r_-r     -c_100_-C_c_-V_:ssl3_-N_-n_TestUser Stress SSL3 RC4 128 with MD5 (no reuse, client auth)
--  noECC     0      -r_-r     -c_100_-C_c_-N_-n_TestUser    Stress TLS RC4 128 with MD5 (no reuse, client auth)
--  noECC     0      -r_-r_-u  -V_ssl3:_-c_100_-C_c_-n_TestUser_-u Stress TLS RC4 128 with MD5 (session ticket, client auth)
--  noECC     0      -r_-r_-z  -V_ssl3:_-c_100_-C_c_-n_TestUser_-z Stress TLS RC4 128 with MD5 (compression, client auth)
--  noECC     0      -r_-r_-z  -V_ssl3:_-c_100_-C_c_-n_TestUser_-z_-g Stress TLS RC4 128 with MD5 (compression, client auth, false start)
--  noECC     0   -r_-r_-u_-z  -V_ssl3:_-c_100_-C_c_-n_TestUser_-u_-z Stress TLS RC4 128 with MD5 (session ticket, compression, client auth)
--  noECC     0   -r_-r_-u_-z  -V_ssl3:_-c_100_-C_c_-n_TestUser_-u_-z_-g Stress TLS RC4 128 with MD5 (session ticket, compression, client auth, false start)
--  SNI       0   -r_-r_-u_-a_Host-sni.Dom -V_tls1.0:_-c_1000_-C_c_-u Stress TLS RC4 128 with MD5 (session ticket, SNI, client auth, default virt host)
--  SNI       0   -r_-r_-u_-a_Host-sni.Dom_-k_Host-sni.Dom -V_tls1.0:_-c_1000_-C_c_-u_-a_Host-sni.Dom Stress TLS RC4 128 with MD5 (session ticket, SNI, client auth, change virt host)
-+#  noECC     0      -r_-r     -c_100_-C_A_-N_-n_TestUser    Stress SSL2 RC4 128 with MD5 (no reuse, client auth)
-+#  noECC     0      -r_-r     -c_100_-C_c_-V_:ssl3_-N_-n_TestUser Stress SSL3 RC4 128 with MD5 (no reuse, client auth)
-+#  noECC     0      -r_-r     -c_100_-C_c_-N_-n_TestUser    Stress TLS RC4 128 with MD5 (no reuse, client auth)
-+#  noECC     0      -r_-r_-u  -V_ssl3:_-c_100_-C_c_-n_TestUser_-u Stress TLS RC4 128 with MD5 (session ticket, client auth)
-+#  noECC     0      -r_-r_-z  -V_ssl3:_-c_100_-C_c_-n_TestUser_-z Stress TLS RC4 128 with MD5 (compression, client auth)
-+#  noECC     0      -r_-r_-z  -V_ssl3:_-c_100_-C_c_-n_TestUser_-z_-g Stress TLS RC4 128 with MD5 (compression, client auth, false start)
-+#  noECC     0   -r_-r_-u_-z  -V_ssl3:_-c_100_-C_c_-n_TestUser_-u_-z Stress TLS RC4 128 with MD5 (session ticket, compression, client auth)
-+#  noECC     0   -r_-r_-u_-z  -V_ssl3:_-c_100_-C_c_-n_TestUser_-u_-z_-g Stress TLS RC4 128 with MD5 (session ticket, compression, client auth, false start)
-+#  SNI       0   -r_-r_-u_-a_Host-sni.Dom -V_tls1.0:_-c_1000_-C_c_-u Stress TLS RC4 128 with MD5 (session ticket, SNI, client auth, default virt host)
-+#  SNI       0   -r_-r_-u_-a_Host-sni.Dom_-k_Host-sni.Dom -V_tls1.0:_-c_1000_-C_c_-u_-a_Host-sni.Dom Stress TLS RC4 128 with MD5 (session ticket, SNI, client auth, change virt host)
- 
- #
- # ############################ ECC ciphers ############################

sources

@@ -1,7 +1,6 @@
-a5ae49867124ac75f029a9a33af31bad  blank-cert8.db
-9315689bbd9f28ceebd47894f99fccbd  blank-key3.db
-73bc040a0542bba387e6dd7fb9fd7d23  blank-secmod.db
-691e663ccc07b7a1eaa6f088e03bf8e2  blank-cert9.db
-2ec9e0606ba40fe65196545564b7cc2a  blank-key4.db
-b8a94e863c852e1f8b75e930e76f8640  nss-pem-20140125.tar.bz2
-c285ef92de0031cb0a8caa60d396d618  nss-3.20.1.tar.gz
+SHA512 (blank-cert8.db) = ac131d15708c5f1b5e467831f919f4fc4ba13b60a4bb5fe260c845fa9afcd899a588d21ed52060abaa1bbb29f2b53af8b495d28407183cb03aff1974f95f1d3d
+SHA512 (blank-cert9.db) = 2f8eab4c0612210ee47db8a3a80c1b58a0b43849551af78c7da403fda3e3d4e7757838061ae56ccf5aac335cb54f254f0a9e6e9c0dd5920b4155a39264525b06
+SHA512 (blank-key3.db) = 01f7314e9fc8a7c9aa997652624cfcde213d18a6b3bb31840c1a60bbd662e56b5bc3221d13874abb42ce78163b225a6dfce2e1326cf6dd29366ad9c28ba5a71c
+SHA512 (blank-key4.db) = 8fedae93af7163da23fe9492ea8e785a44c291604fa98e58438448efb69c85d3253fc22b926d5c3209c62e58a86038fd4d78a1c4c068bc00600a7f3e5382ebe7
+SHA512 (blank-secmod.db) = 06a2dbd861839ef6315093459328b500d3832333a34b30e6fac4a2503af337f014a4d319f0f93322409e719142904ce8bc08252ae9a4f37f30d4c3312e900310
+SHA512 (nss-3.52.tar.gz) = a45baf38717bceda03c292b2c01def680a24a846327e17d36044a85e30ed40c68220c78c0a2c3025c11778ee58f5d5eb0fff1b4cd274b95c408fb59e394e62c6

tests/NSS-tools-should-not-use-SHA1-by-default-when/Makefile

@@ -0,0 +1,64 @@
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+#   Makefile of /CoreOS/nss/Regression/NSS-tools-should-not-use-SHA1-by-default-when
+#   Description: NSS tools should not use SHA1 by default when
+#   Author: Hubert Kario <hkario@redhat.com>
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+#   Copyright (c) 2016 Red Hat, Inc.
+#
+#   This copyrighted material is made available to anyone wishing
+#   to use, modify, copy, or redistribute it subject to the terms
+#   and conditions of the GNU General Public License version 2.
+#
+#   This program is distributed in the hope that it will be
+#   useful, but WITHOUT ANY WARRANTY; without even the implied
+#   warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+#   PURPOSE. See the GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public
+#   License along with this program; if not, write to the Free
+#   Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+#   Boston, MA 02110-1301, USA.
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+export TEST=/CoreOS/nss/Regression/NSS-tools-should-not-use-SHA1-by-default-when
+export TESTVERSION=1.0
+
+BUILT_FILES=
+
+FILES=$(METADATA) runtest.sh Makefile PURPOSE
+
+.PHONY: all install download clean
+
+run: $(FILES) build
+	./runtest.sh
+
+build: $(BUILT_FILES)
+	test -x runtest.sh || chmod a+x runtest.sh
+
+clean:
+	rm -f *~ $(BUILT_FILES)
+
+
+include /usr/share/rhts/lib/rhts-make.include
+
+$(METADATA): Makefile
+	@echo "Owner:           Hubert Kario <hkario@redhat.com>" > $(METADATA)
+	@echo "Name:            $(TEST)" >> $(METADATA)
+	@echo "TestVersion:     $(TESTVERSION)" >> $(METADATA)
+	@echo "Path:            $(TEST_DIR)" >> $(METADATA)
+	@echo "Description:     NSS tools should not use SHA1 by default when" >> $(METADATA)
+	@echo "Type:            Regression" >> $(METADATA)
+	@echo "TestTime:        10m" >> $(METADATA)
+	@echo "RunFor:          nss openssl" >> $(METADATA)
+	@echo "Requires:        nss nss-tools openssl" >> $(METADATA)
+	@echo "Priority:        Normal" >> $(METADATA)
+	@echo "License:         GPLv2" >> $(METADATA)
+	@echo "Confidential:    no" >> $(METADATA)
+	@echo "Destructive:     no" >> $(METADATA)
+	@echo "Releases:        -RHEL4 -RHELClient5 -RHELServer5" >> $(METADATA)
+
+	rhts-lint $(METADATA)

tests/NSS-tools-should-not-use-SHA1-by-default-when/PURPOSE

@@ -0,0 +1,4 @@
+PURPOSE of NSS-tools-should-not-use-SHA1-by-default-when
+Description: NSS tools should not use SHA1 by default when
+Author: Hubert Kario <hkario@redhat.com>
+Summary: NSS tools should not use SHA1 by default when generating digital signatures/certificates

tests/NSS-tools-should-not-use-SHA1-by-default-when/runtest.sh

@@ -0,0 +1,125 @@
+#!/bin/bash
+# vim: dict+=/usr/share/beakerlib/dictionary.vim cpt=.,w,b,u,t,i,k
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+#   runtest.sh of NSS-tools-should-not-use-SHA1-by-default-when
+#   Description: NSS tools should not use SHA1 by default when
+#   Author: Hubert Kario <hkario@redhat.com>
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+#   Copyright (c) 2016 Red Hat, Inc.
+#
+#   This copyrighted material is made available to anyone wishing
+#   to use, modify, copy, or redistribute it subject to the terms
+#   and conditions of the GNU General Public License version 2.
+#
+#   This program is distributed in the hope that it will be
+#   useful, but WITHOUT ANY WARRANTY; without even the implied
+#   warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+#   PURPOSE. See the GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public
+#   License along with this program; if not, write to the Free
+#   Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+#   Boston, MA 02110-1301, USA.
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+# Include Beaker environment
+. /usr/share/beakerlib/beakerlib.sh || exit 1
+
+PACKAGE="nss"
+PACKAGES="nss openssl"
+DBDIR="nssdb"
+
+rlJournalStart
+    rlPhaseStartSetup
+        rlAssertRpm --all
+        rlRun "TmpDir=\$(mktemp -d)" 0 "Creating tmp directory"
+        rlRun "pushd $TmpDir"
+        rlRun "mkdir nssdb"
+        rlRun "certutil -N -d $DBDIR --empty-password"
+        rlLogInfo "Create a JAR file"
+        rlRun "mkdir java-dir"
+        rlRun "pushd java-dir"
+        rlRun "mkdir META-INF mypackage"
+        rlRun "echo 'Main-Class: mypackage/MyMainFile' > META-INF/MANIFEST.MF"
+        rlRun "echo 'Those are not the droids you are looking for' > mypackage/MyMainFile.class"
+        #rlRun "jar -cfe package.jar mypackage/MyMainFile mypackage/MyMainFile.class"
+        rlRun "popd"
+        #rlRun "mv java-dir/package.jar ."
+    rlPhaseEnd
+
+    rlPhaseStartTest "Self signing certificates"
+        rlRun "dd if=/dev/urandom of=noise bs=1 count=32 >/dev/null"
+        rlRun "certutil -d $DBDIR -S -n 'CA' -t 'cTC,cTC,cTC' -s 'CN=CA' -x -z noise"
+        rlRun -s "certutil -d $DBDIR -L -n 'CA' -a | openssl x509 -noout -text"
+        rlAssertGrep "Signature Algorithm: sha256WithRSAEncryption" "$rlRun_LOG"
+        rlAssertNotGrep "Signature Algorithm: sha1WithRSAEncryption" $rlRun_LOG
+    rlPhaseEnd
+
+    rlPhaseStartTest "Signing certificates"
+        rlRun "dd if=/dev/urandom of=noise bs=1 count=32 >/dev/null"
+        rlRun "certutil -d $DBDIR -S -n 'server' -t 'u,u,u' -s 'CN=server.example.com' -c 'CA' -z noise --nsCertType sslClient,sslServer,objectSigning,smime"
+        rlRun -s "certutil -d $DBDIR -L -n 'server' -a | openssl x509 -noout -text"
+        rlAssertGrep "Signature Algorithm: sha256WithRSAEncryption" "$rlRun_LOG"
+        rlAssertNotGrep "Signature Algorithm: sha1WithRSAEncryption" $rlRun_LOG
+    rlPhaseEnd
+
+    rlPhaseStartTest "Certificate request"
+        rlRun "dd if=/dev/urandom of=noise bs=1 count=32 >/dev/null"
+        rlRun "mkdir srv2db"
+        rlRun "certutil -d srv2db -N --empty-password"
+        rlRun "certutil -d srv2db -R -s CN=www.example.com -o srv2.req -a -z noise"
+        rlRun -s "openssl req -noout -text -in srv2.req"
+        rlAssertGrep "Signature Algorithm: sha256WithRSAEncryption" "$rlRun_LOG"
+        rlAssertNotGrep "Signature Algorithm: sha1WithRSAEncryption" $rlRun_LOG
+        rlRun "certutil -d $DBDIR -C -c 'CA' -i srv2.req -a -o srv2.crt"
+        rlRun -s "openssl x509 -in srv2.crt -noout -text"
+        rlAssertGrep "Signature Algorithm: sha256WithRSAEncryption" "$rlRun_LOG"
+        rlAssertNotGrep "Signature Algorithm: sha1WithRSAEncryption" $rlRun_LOG
+        rlRun "rm -rf srv2db"
+    rlPhaseEnd
+
+    rlPhaseStartTest "Certificate request with SHA1"
+        rlRun "dd if=/dev/urandom of=noise bs=1 count=32 >/dev/null"
+        rlRun "mkdir srv2db"
+        rlRun "certutil -d srv2db -N --empty-password"
+        rlRun "certutil -d srv2db -R -s CN=www.example.com -o srv2.req -a -z noise -Z SHA1"
+        rlRun -s "openssl req -noout -text -in srv2.req"
+        rlAssertGrep "Signature Algorithm: sha1WithRSAEncryption" "$rlRun_LOG"
+        rlRun "certutil -d $DBDIR -C -c 'CA' -i srv2.req -a -o srv2.crt"
+        rlRun -s "openssl x509 -in srv2.crt -noout -text"
+        rlAssertGrep "Signature Algorithm: sha256WithRSAEncryption" "$rlRun_LOG"
+        rlAssertNotGrep "Signature Algorithm: sha1WithRSAEncryption" $rlRun_LOG
+        rlRun "rm -rf srv2db"
+    rlPhaseEnd
+
+    rlPhaseStartTest "Signing CMS messages"
+        rlRun "echo 'This is a document' > document.txt"
+        rlRun "cmsutil -S -d $DBDIR -N 'server' -i document.txt -o document.cms"
+        rlRun -s "openssl cms -in document.cms -inform der -noout -cmsout -print"
+        rlAssertGrep "algorithm: sha256" $rlRun_LOG
+        rlAssertNotGrep "algorithm: sha1" $rlRun_LOG
+    rlPhaseEnd
+
+    rlPhaseStartTest "CRL signing"
+        rlRun "echo $(date --utc +update=%Y%m%d%H%M%SZ) > script"
+        rlRun "echo $(date -d 'next week' --utc +nextupdate=%Y%m%d%H%M%SZ) >> script"
+        rlRun "echo addext crlNumber 0 1245 >>script"
+        rlRun "echo addcert 12 $(date -d 'yesterday' --utc +%Y%m%d%H%M%SZ) >>script"
+        rlRun "echo addext reasonCode 0 0 >>script"
+        rlRun "cat script"
+        rlRun "crlutil -G -c script -d $DBDIR -n CA -o ca.crl"
+        rlRun -s "openssl crl -in ca.crl -inform der -noout -text"
+        rlAssertGrep "Signature Algorithm: sha256WithRSAEncryption" $rlRun_LOG
+        rlAssertNotGrep "Signature Algorithm: sha1WithRSAEncryption" $rlRun_LOG
+    rlPhaseEnd
+
+    rlPhaseStartCleanup
+        rlRun "popd"
+        rlRun "rm -r $TmpDir" 0 "Removing tmp directory"
+    rlPhaseEnd
+rlJournalPrintText
+rlJournalEnd

tests/tests.yml

@@ -0,0 +1,12 @@
+---
+# This first play always runs on the local staging system
+- hosts: localhost
+  roles:
+  - role: standard-test-beakerlib
+    tags:
+    - classic
+    tests:
+    - NSS-tools-should-not-use-SHA1-by-default-when
+    required_packages:
+    - nss-tools
+    - nss

tstclnt-ssl2-off-by-default.patch

@@ -1,21 +0,0 @@
-diff -up ./nss/cmd/tstclnt/tstclnt.c.ssl2_off ./nss/cmd/tstclnt/tstclnt.c
---- ./nss/cmd/tstclnt/tstclnt.c.ssl2_off	2015-08-07 11:12:13.000000000 -0700
-+++ ./nss/cmd/tstclnt/tstclnt.c	2015-09-11 20:08:34.771859950 -0700
-@@ -212,7 +212,7 @@ static void PrintParameterUsage(void)
-     fprintf(stderr, 
-             "%-20s Restricts the set of enabled SSL/TLS protocols versions.\n"
-             "%-20s All versions are enabled by default.\n"
--            "%-20s Possible values for min/max: ssl2 ssl3 tls1.0 tls1.1 tls1.2\n"
-+            "%-20s Possible values for min/max: ssl3 tls1.0 tls1.1 tls1.2\n"
-             "%-20s Example: \"-V ssl3:\" enables SSL 3 and newer.\n",
-             "-V [min]:[max]", "", "", "");
-     fprintf(stderr, "%-20s Send TLS_FALLBACK_SCSV\n", "-K");
-@@ -911,7 +911,7 @@ int main(int argc, char **argv)
-     int                npds;
-     int                override = 0;
-     SSLVersionRange    enabledVersions;
--    PRBool             enableSSL2 = PR_TRUE;
-+    PRBool             enableSSL2 = PR_FALSE;
-     int                bypassPKCS11 = 0;
-     int                disableLocking = 0;
-     int                useExportPolicy = 0;

utilwrap-include-templates.patch

@@ -1,14 +0,0 @@
-diff -up nss/lib/nss/config.mk.templates nss/lib/nss/config.mk
---- nss/lib/nss/config.mk.templates	2013-06-18 11:32:07.590089155 -0700
-+++ nss/lib/nss/config.mk	2013-06-18 11:33:28.732763345 -0700
-@@ -3,6 +3,10 @@
- # License, v. 2.0. If a copy of the MPL was not distributed with this
- # file, You can obtain one at http://mozilla.org/MPL/2.0/.
- 
-+#ifeq ($(NSS_BUILD_WITHOUT_SOFTOKEN),1)
-+INCLUDES += -I/usr/include/nss3/templates
-+#endif
-+
- # can't do this in manifest.mn because OS_TARGET isn't defined there.
- ifeq (,$(filter-out WIN%,$(OS_TARGET)))
-