# -*- rpm-spec -*- # This spec file assumes you are building on a Fedora or RHEL version # that's still supported by the vendor: that means Fedora 23 or newer, # or RHEL 6 or newer. It may need some tweaks for other distros. # If neither fedora nor rhel was defined, try to guess them from dist %if (0%{?fedora} && 0%{?fedora} >= 23) || (0%{?rhel} && 0%{?rhel} >= 6) %define supported_platform 1 %else %define supported_platform 0 %endif # Default to skipping autoreconf. Distros can change just this one line # (or provide a command-line override) if they backport any patches that # touch configure.ac or Makefile.am. %{!?enable_autotools:%global enable_autotools 0} # The hypervisor drivers that run in libvirtd %define with_xen 0%{!?_without_xen:1} %define with_qemu 0%{!?_without_qemu:1} %define with_lxc 0%{!?_without_lxc:1} %define with_uml 0%{!?_without_uml:1} %define with_libxl 0%{!?_without_libxl:1} %define with_vbox 0%{!?_without_vbox:1} %define with_qemu_tcg %{with_qemu} %define qemu_kvm_arches %{ix86} x86_64 %if 0%{?fedora} %define qemu_kvm_arches %{ix86} x86_64 %{power64} s390x %{arm} aarch64 %endif %if 0%{?rhel} %define with_qemu_tcg 0 %define qemu_kvm_arches x86_64 %if 0%{?rhel} >= 7 %define qemu_kvm_arches x86_64 %{power64} aarch64 %endif %endif %ifarch %{qemu_kvm_arches} %define with_qemu_kvm %{with_qemu} %else %define with_qemu_kvm 0 %endif %if ! %{with_qemu_tcg} && ! %{with_qemu_kvm} %define with_qemu 0 %endif # Then the hypervisor drivers that run outside libvirtd, in libvirt.so %define with_openvz 0%{!?_without_openvz:1} %define with_vmware 0%{!?_without_vmware:1} %define with_phyp 0%{!?_without_phyp:1} %define with_esx 0%{!?_without_esx:1} %define with_hyperv 0%{!?_without_hyperv:1} # Then the secondary host drivers, which run inside libvirtd %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_storage_rbd 0%{!?_without_storage_rbd:1} %else %define with_storage_rbd 0 %endif %if 0%{?fedora} %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:1} %else %define with_storage_sheepdog 0 %endif %define with_storage_gluster 0%{!?_without_storage_gluster:1} %define with_numactl 0%{!?_without_numactl:1} # F25+ has zfs-fuse %if 0%{?fedora} >= 25 %define with_storage_zfs 0%{!?_without_storage_zfs:1} %else %define with_storage_zfs 0 %endif # A few optional bits off by default, we enable later %define with_fuse 0%{!?_without_fuse:0} %define with_cgconfig 0%{!?_without_cgconfig:0} %define with_sanlock 0%{!?_without_sanlock:0} %define with_systemd 0%{!?_without_systemd:0} %define with_numad 0%{!?_without_numad:0} %define with_firewalld 0%{!?_without_firewalld:0} %define with_libssh2 0%{!?_without_libssh2:0} %define with_wireshark 0%{!?_without_wireshark:0} %define with_libssh 0%{!?_without_libssh:0} %define with_pm_utils 1 # Finally set the OS / architecture specific special cases # Xen is available only on i386 x86_64 ia64 %ifnarch %{ix86} x86_64 ia64 %define with_xen 0 %define with_libxl 0 %endif # vbox is available only on i386 x86_64 %ifnarch %{ix86} x86_64 %define with_vbox 0 %endif # Numactl is not available on s390[x] and ARM %ifarch s390 s390x %{arm} %define with_numactl 0 %endif # libgfapi is built only on x86_64 on rhel %ifnarch x86_64 %if 0%{?rhel} %define with_storage_gluster 0 %endif %endif # librados and librbd are built only on x86_64 on rhel %ifnarch x86_64 %if 0%{?rhel} >= 7 %define with_storage_rbd 0 %endif %endif # zfs-fuse is not available on some architectures %ifarch s390 s390x aarch64 %define with_storage_zfs 0 %endif # RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor, # VMware, libxenserver (xenapi), libxenlight (Xen 4.1 and newer), # or HyperV. %if 0%{?rhel} %define with_openvz 0 %define with_vbox 0 %define with_uml 0 %define with_phyp 0 %define with_vmware 0 %define with_xenapi 0 %define with_libxl 0 %define with_hyperv 0 %define with_vz 0 %endif # Fedora 17 / RHEL-7 are first where we use systemd. Although earlier # Fedora has systemd, libvirt still used sysvinit there. %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_systemd 1 %define with_pm_utils 0 %endif # Fedora 18 / RHEL-7 are first where firewalld support is enabled %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_firewalld 1 %endif # RHEL-6 stopped including Xen on all archs. %if 0%{?rhel} %define with_xen 0 %endif # fuse is used to provide virtualized /proc for LXC %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_fuse 0%{!?_without_fuse:1} %endif # Enable sanlock library for lock management with QEMU # Sanlock is available only on arches where kvm is available for RHEL %if 0%{?fedora} %define with_sanlock 0%{!?_without_sanlock:1} %endif %if 0%{?rhel} %ifarch %{qemu_kvm_arches} %define with_sanlock 0%{!?_without_sanlock:1} %endif %endif # Enable libssh2 transport for new enough distros %if 0%{?fedora} %define with_libssh2 0%{!?_without_libssh2:1} %endif # Enable wireshark plugins for all distros shipping libvirt 1.2.2 or newer %if 0%{?fedora} %define with_wireshark 0%{!?_without_wireshark:1} %endif # Enable libssh transport for new enough distros %if 0%{?fedora} %define with_libssh 0%{!?_without_libssh:1} %endif %if %{with_qemu} || %{with_lxc} || %{with_uml} # numad is used to manage the CPU and memory placement dynamically, # it's not available on s390[x] and ARM. %ifnarch s390 s390x %{arm} %define with_numad 0%{!?_without_numad:1} %endif %endif # Pull in cgroups config system %if %{with_qemu} || %{with_lxc} %define with_cgconfig 0%{!?_without_cgconfig:1} %endif # Force QEMU to run as non-root %define qemu_user qemu %define qemu_group qemu %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_systemd_macros 1 %else %define with_systemd_macros 0 %endif # RHEL releases provide stable tool chains and so it is safe to turn # compiler warning into errors without being worried about frequent # changes in reported warnings %if 0%{?rhel} %define enable_werror --enable-werror %else %define enable_werror --disable-werror %endif %if 0%{?fedora} >= 25 %define tls_priority "@LIBVIRT,SYSTEM" %else %if 0%{?fedora} %define tls_priority "@SYSTEM" %else %define tls_priority "NORMAL" %endif %endif Summary: Library providing a simple virtualization API Name: libvirt Version: 3.6.0 Release: 1%{?dist}%{?extra_release} License: LGPLv2+ Group: Development/Libraries BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root URL: https://libvirt.org/ %if %(echo %{version} | grep -q "\.0$"; echo $?) == 1 %define mainturl stable_updates/ %endif Source: https://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.xz Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-config-network = %{version}-%{release} Requires: libvirt-daemon-config-nwfilter = %{version}-%{release} %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif %if %{with_lxc} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} %endif %if %{with_qemu} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} %endif %if %{with_uml} Requires: libvirt-daemon-driver-uml = %{version}-%{release} %endif %if %{with_xen} Requires: libvirt-daemon-driver-xen = %{version}-%{release} %endif %if %{with_vbox} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} %endif Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-client = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # All build-time requirements. Run-time requirements are # listed against each sub-RPM %if 0%{?enable_autotools} BuildRequires: autoconf BuildRequires: automake BuildRequires: gettext-devel BuildRequires: libtool BuildRequires: /usr/bin/pod2man %endif BuildRequires: git BuildRequires: perl-interpreter BuildRequires: python %if %{with_systemd} BuildRequires: systemd-units %endif %if %{with_xen} || %{with_libxl} BuildRequires: xen-devel %endif BuildRequires: libxml2-devel BuildRequires: xhtml1-dtds BuildRequires: libxslt BuildRequires: readline-devel BuildRequires: ncurses-devel BuildRequires: gettext BuildRequires: libtasn1-devel %if (0%{?rhel} && 0%{?rhel} < 7) BuildRequires: libgcrypt-devel %endif BuildRequires: gnutls-devel BuildRequires: libattr-devel # For pool-build probing for existing pools BuildRequires: libblkid-devel >= 2.17 # for augparse, optionally used in testing BuildRequires: augeas %if 0%{?fedora} || 0%{?rhel} >= 7 BuildRequires: systemd-devel >= 185 %else BuildRequires: libudev-devel >= 145 %endif BuildRequires: libpciaccess-devel >= 0.10.9 BuildRequires: yajl-devel %if %{with_sanlock} BuildRequires: sanlock-devel >= 2.4 %endif BuildRequires: libpcap-devel %if 0%{?rhel} && 0%{?rhel} < 7 BuildRequires: libnl-devel %else BuildRequires: libnl3-devel %endif BuildRequires: avahi-devel BuildRequires: libselinux-devel BuildRequires: dnsmasq >= 2.41 BuildRequires: iptables %if 0%{?rhel} && 0%{?rhel} < 7 BuildRequires: iptables-ipv6 %endif BuildRequires: radvd BuildRequires: ebtables BuildRequires: module-init-tools BuildRequires: cyrus-sasl-devel %if 0%{?fedora} || 0%{?rhel} >= 7 # F22 polkit-devel doesn't pull in polkit anymore, which we need for pkcheck BuildRequires: polkit >= 0.112 BuildRequires: polkit-devel >= 0.112 %else BuildRequires: polkit-devel >= 0.93 %endif # For mount/umount in FS driver BuildRequires: util-linux %if %{with_qemu} # For managing ACLs BuildRequires: libacl-devel # From QEMU RPMs BuildRequires: /usr/bin/qemu-img %else %if %{with_xen} # From Xen RPMs BuildRequires: /usr/sbin/qcow-create %endif %endif # For LVM drivers BuildRequires: lvm2 # For ISCSI driver BuildRequires: iscsi-initiator-utils # For disk driver BuildRequires: parted-devel # For Multipath support BuildRequires: device-mapper-devel %if %{with_storage_rbd} %if 0%{?fedora} || 0%{?rhel} >= 7 BuildRequires: librados2-devel BuildRequires: librbd1-devel %else BuildRequires: ceph-devel %endif %endif %if %{with_storage_gluster} BuildRequires: glusterfs-api-devel >= 3.4.1 BuildRequires: glusterfs-devel >= 3.4.1 %endif %if %{with_storage_sheepdog} BuildRequires: sheepdog %endif %if %{with_storage_zfs} # Support any conforming implementation of zfs. On stock Fedora # this is zfs-fuse, but could be zfsonlinux upstream RPMs BuildRequires: /sbin/zfs BuildRequires: /sbin/zpool %endif %if %{with_numactl} # For QEMU/LXC numa info BuildRequires: numactl-devel %endif BuildRequires: libcap-ng-devel >= 0.5.0 %if %{with_fuse} BuildRequires: fuse-devel >= 2.8.6 %endif %if %{with_phyp} || %{with_libssh2} BuildRequires: libssh2-devel >= 1.3.0 %endif %if 0%{?fedora} || 0%{?rhel} >= 7 BuildRequires: netcf-devel >= 0.2.2 %else BuildRequires: netcf-devel >= 0.1.8 %endif %if %{with_esx} BuildRequires: libcurl-devel %endif %if %{with_hyperv} BuildRequires: libwsman-devel >= 2.2.3 %endif BuildRequires: audit-libs-devel # we need /usr/sbin/dtrace BuildRequires: systemtap-sdt-devel # For mount/umount in FS driver BuildRequires: util-linux # For showmount in FS driver (netfs discovery) BuildRequires: nfs-utils # Communication with the firewall and polkit daemons use DBus BuildRequires: dbus-devel # Fedora build root suckage BuildRequires: gawk # For storage wiping with different algorithms BuildRequires: scrub %if %{with_numad} BuildRequires: numad %endif %if %{with_wireshark} %if 0%{fedora} >= 24 BuildRequires: wireshark-devel >= 2.1.0 %else BuildRequires: wireshark-devel >= 1.12.1 %endif %endif %if %{with_libssh} BuildRequires: libssh-devel >= 0.7.0 %endif Provides: bundled(gnulib) %description Libvirt is a C toolkit to interact with the virtualization capabilities of recent versions of Linux (and other OSes). The main package includes the libvirtd server exporting the virtualization support. %package docs Summary: API reference and website documentation Group: Development/Libraries %description docs Includes the API reference for the libvirt C library, and a complete copy of the libvirt.org website documentation. %package daemon Summary: Server side daemon and supporting files for libvirt library Group: Development/Libraries # All runtime requirements for the libvirt package (runtime requrements # for subpackages are listed later in those subpackages) # The client side, i.e. shared libs are in a subpackage Requires: %{name}-libs = %{version}-%{release} # for modprobe of pci devices Requires: module-init-tools # for /sbin/ip & /sbin/tc Requires: iproute Requires: avahi-libs %if 0%{?fedora} || 0%{?rhel} >= 7 Requires: polkit >= 0.112 %else Requires: polkit >= 0.93 %endif %if %{with_cgconfig} Requires: libcgroup %endif %ifarch %{ix86} x86_64 ia64 # For virConnectGetSysinfo Requires: dmidecode %endif # For service management %if %{with_systemd} Requires(post): systemd-units Requires(post): systemd-sysv Requires(preun): systemd-units Requires(postun): systemd-units %endif %if %{with_numad} Requires: numad %endif # libvirtd depends on 'messagebus' service Requires: dbus # For uid creation during pre Requires(pre): shadow-utils %description daemon Server side daemon required to manage the virtualization capabilities of recent versions of Linux. Requires a hypervisor specific sub-RPM for specific drivers. %package daemon-config-network Summary: Default configuration files for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} %description daemon-config-network Default configuration files for setting up NAT based networking %package daemon-config-nwfilter Summary: Network filter configuration files for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} %description daemon-config-nwfilter Network filter configuration files for cleaning guest traffic %package daemon-driver-network Summary: Network driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: dnsmasq >= 2.41 Requires: radvd Requires: iptables %if 0%{?rhel} && 0%{?rhel} < 7 Requires: iptables-ipv6 %endif %description daemon-driver-network The network driver plugin for the libvirtd daemon, providing an implementation of the virtual network APIs using the Linux bridge capabilities. %package daemon-driver-nwfilter Summary: Nwfilter driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: iptables %if 0%{?rhel} && 0%{?rhel} < 7 Requires: iptables-ipv6 %endif Requires: ebtables %description daemon-driver-nwfilter The nwfilter driver plugin for the libvirtd daemon, providing an implementation of the firewall APIs using the ebtables, iptables and ip6tables capabilities %package daemon-driver-nodedev Summary: Nodedev driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} # needed for device enumeration %if 0%{?fedora} || 0%{?rhel} >= 7 Requires: systemd >= 185 %else Requires: udev >= 145 %endif %description daemon-driver-nodedev The nodedev driver plugin for the libvirtd daemon, providing an implementation of the node device APIs using the udev capabilities. %package daemon-driver-interface Summary: Interface driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} %if (0%{?fedora} || 0%{?rhel} >= 7) Requires: netcf-libs >= 0.2.2 %endif %description daemon-driver-interface The interface driver plugin for the libvirtd daemon, providing an implementation of the network interface APIs using the netcf library %package daemon-driver-secret Summary: Secret driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-secret The secret driver plugin for the libvirtd daemon, providing an implementation of the secret key APIs. %package daemon-driver-storage-core Summary: Storage driver plugin including base backends for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: nfs-utils # For mkfs Requires: util-linux %if %{with_qemu} # From QEMU RPMs Requires: /usr/bin/qemu-img %else %if %{with_xen} # From Xen RPMs Requires: /usr/sbin/qcow-create %endif %endif %description daemon-driver-storage-core The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using files, local disks, LVM, SCSI, iSCSI, and multipath storage. %package daemon-driver-storage-logical Summary: Storage driver plugin for lvm volumes Group: Development/Libraries Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: lvm2 %description daemon-driver-storage-logical The storage driver backend adding implementation of the storage APIs for block volumes using lvm. %package daemon-driver-storage-disk Summary: Storage driver plugin for disk Group: Development/Libraries Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: parted Requires: device-mapper %description daemon-driver-storage-disk The storage driver backend adding implementation of the storage APIs for block volumes using the host disks. %package daemon-driver-storage-scsi Summary: Storage driver plugin for local scsi devices Group: Development/Libraries Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} %description daemon-driver-storage-scsi The storage driver backend adding implementation of the storage APIs for scsi host devices. %package daemon-driver-storage-iscsi Summary: Storage driver plugin for iscsi Group: Development/Libraries Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: iscsi-initiator-utils %description daemon-driver-storage-iscsi The storage driver backend adding implementation of the storage APIs for iscsi volumes using the host iscsi stack. %package daemon-driver-storage-mpath Summary: Storage driver plugin for multipath volumes Group: Development/Libraries Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: device-mapper %description daemon-driver-storage-mpath The storage driver backend adding implementation of the storage APIs for multipath storage using device mapper. %if %{with_storage_gluster} %package daemon-driver-storage-gluster Summary: Storage driver plugin for gluster Group: Development/Libraries Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} %if 0%{?fedora} Requires: glusterfs-client >= 2.0.1 %endif %if (0%{?fedora} || 0%{?with_storage_gluster}) Requires: /usr/sbin/gluster %endif %description daemon-driver-storage-gluster The storage driver backend adding implementation of the storage APIs for gluster volumes using libgfapi. %endif %if %{with_storage_rbd} %package daemon-driver-storage-rbd Summary: Storage driver plugin for rbd Group: Development/Libraries Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} %description daemon-driver-storage-rbd The storage driver backend adding implementation of the storage APIs for rbd volumes using the ceph protocol. %endif %if %{with_storage_sheepdog} %package daemon-driver-storage-sheepdog Summary: Storage driver plugin for sheepdog Group: Development/Libraries Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: sheepdog %description daemon-driver-storage-sheepdog The storage driver backend adding implementation of the storage APIs for sheepdog volumes using. %endif %if %{with_storage_zfs} %package daemon-driver-storage-zfs Summary: Storage driver plugin for ZFS Group: Development/Libraries Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} # Support any conforming implementation of zfs Requires: /sbin/zfs Requires: /sbin/zpool %description daemon-driver-storage-zfs The storage driver backend adding implementation of the storage APIs for ZFS volumes. %endif %package daemon-driver-storage Summary: Storage driver plugin including all backends for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-daemon-driver-storage-disk = %{version}-%{release} Requires: libvirt-daemon-driver-storage-logical = %{version}-%{release} Requires: libvirt-daemon-driver-storage-scsi = %{version}-%{release} Requires: libvirt-daemon-driver-storage-iscsi = %{version}-%{release} Requires: libvirt-daemon-driver-storage-mpath = %{version}-%{release} %if %{with_storage_gluster} Requires: libvirt-daemon-driver-storage-gluster = %{version}-%{release} %endif %if %{with_storage_rbd} Requires: libvirt-daemon-driver-storage-rbd = %{version}-%{release} %endif %if %{with_storage_sheepdog} Requires: libvirt-daemon-driver-storage-sheepdog = %{version}-%{release} %endif %if %{with_storage_zfs} Requires: libvirt-daemon-driver-storage-zfs = %{version}-%{release} %endif %description daemon-driver-storage The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using LVM, iSCSI, parted and more. %if %{with_qemu} %package daemon-driver-qemu Summary: QEMU driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} # There really is a hard cross-driver dependency here Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: /usr/bin/qemu-img # For image compression Requires: gzip Requires: bzip2 Requires: lzop Requires: xz %if 0%{?fedora} >= 24 Requires: systemd-container %endif %description daemon-driver-qemu The qemu driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using QEMU %endif %if %{with_lxc} %package daemon-driver-lxc Summary: LXC driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} # There really is a hard cross-driver dependency here Requires: libvirt-daemon-driver-network = %{version}-%{release} %if 0%{?fedora} >= 24 Requires: systemd-container %endif %description daemon-driver-lxc The LXC driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using the Linux kernel %endif %if %{with_uml} %package daemon-driver-uml Summary: Uml driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-uml The UML driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using User Mode Linux %endif %if %{with_xen} %package daemon-driver-xen Summary: Xen driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-xen The Xen driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using Xen %endif %if %{with_vbox} %package daemon-driver-vbox Summary: VirtualBox driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-vbox The vbox driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using VirtualBox %endif %if %{with_libxl} %package daemon-driver-libxl Summary: Libxl driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-libxl The Libxl driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using Libxl %endif %if %{with_qemu_tcg} %package daemon-qemu Summary: Server side daemon & driver required to run QEMU guests Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: qemu %description daemon-qemu Server side daemon and driver required to manage the virtualization capabilities of the QEMU TCG emulators %endif %if %{with_qemu_kvm} %package daemon-kvm Summary: Server side daemon & driver required to run KVM guests Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: qemu-kvm %description daemon-kvm Server side daemon and driver required to manage the virtualization capabilities of the KVM hypervisor %endif %if %{with_lxc} %package daemon-lxc Summary: Server side daemon & driver required to run LXC guests Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-lxc Server side daemon and driver required to manage the virtualization capabilities of LXC %endif %if %{with_uml} %package daemon-uml Summary: Server side daemon & driver required to run UML guests Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-uml = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} # There are no UML kernel RPMs in Fedora/RHEL to depend on. %description daemon-uml Server side daemon and driver required to manage the virtualization capabilities of UML %endif %if %{with_xen} || %{with_libxl} %package daemon-xen Summary: Server side daemon & driver required to run XEN guests Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} %if %{with_xen} Requires: libvirt-daemon-driver-xen = %{version}-%{release} %endif %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: xen %description daemon-xen Server side daemon and driver required to manage the virtualization capabilities of XEN %endif %if %{with_vbox} %package daemon-vbox Summary: Server side daemon & driver required to run VirtualBox guests Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-vbox Server side daemon and driver required to manage the virtualization capabilities of VirtualBox %endif %package client Summary: Client side utilities of the libvirt library Group: Development/Libraries Requires: %{name}-libs = %{version}-%{release} Requires: readline Requires: ncurses # Needed by /usr/libexec/libvirt-guests.sh script. Requires: gettext # Needed by virt-pki-validate script. Requires: gnutls-utils %if %{with_pm_utils} # Needed for probing the power management features of the host. Requires: pm-utils %endif %description client The client binaries needed to access the virtualization capabilities of recent versions of Linux (and other OSes). %package libs Summary: Client side libraries Group: Development/Libraries # So remote clients can access libvirt over SSH tunnel # (client invokes 'nc' against the UNIX socket on the server) Requires: nc Requires: cyrus-sasl # Needed by default sasl.conf - no onerous extra deps, since # 100's of other things on a system already pull in krb5-libs Requires: cyrus-sasl-gssapi %description libs Shared libraries for accessing the libvirt daemon. %package admin Summary: Set of tools to control libvirt daemon Group: Development/Libraries Requires: %{name}-libs = %{version}-%{release} Requires: readline %description admin The client side utilities to control the libvirt daemon. %if %{with_wireshark} %package wireshark Summary: Wireshark dissector plugin for libvirt RPC transactions Group: Development/Libraries Requires: wireshark >= 1.12.6-4 Requires: %{name}-libs = %{version}-%{release} %description wireshark Wireshark dissector plugin for better analysis of libvirt RPC traffic. %endif %if %{with_lxc} %package login-shell Summary: Login shell for connecting users to an LXC container Group: Development/Libraries Requires: %{name}-libs = %{version}-%{release} %description login-shell Provides the set-uid virt-login-shell binary that is used to connect a user to an LXC container when they login, by switching namespaces. %endif %package devel Summary: Libraries, includes, etc. to compile with the libvirt library Group: Development/Libraries Requires: %{name}-libs = %{version}-%{release} Requires: pkgconfig %description devel Include header files & development libraries for the libvirt C library. %if %{with_sanlock} %package lock-sanlock Summary: Sanlock lock manager plugin for QEMU driver Group: Development/Libraries Requires: sanlock >= 2.4 #for virt-sanlock-cleanup require augeas Requires: augeas Requires: %{name}-daemon = %{version}-%{release} Requires: %{name}-libs = %{version}-%{release} %description lock-sanlock Includes the Sanlock lock manager plugin for the QEMU driver %endif %package nss Summary: Libvirt plugin for Name Service Switch Group: Development/Libraries Requires: libvirt-daemon-driver-network = %{version}-%{release} %description nss Libvirt plugin for NSS for translating domain names into IP addresses. %prep %if ! %{supported_platform} echo "This RPM requires either Fedora >= 20 or RHEL >= 6" exit 1 %endif %setup -q # Patches have to be stored in a temporary file because RPM has # a limit on the length of the result of any macro expansion; # if the string is longer, it's silently cropped %{lua: tmp = os.tmpname(); f = io.open(tmp, "w+"); count = 0; for i, p in ipairs(patches) do f:write(p.."\n"); count = count + 1; end; f:close(); print("PATCHCOUNT="..count.."\n") print("PATCHLIST="..tmp.."\n") } git init -q git config user.name rpm-build git config user.email rpm-build git config gc.auto 0 git add . git commit -q -a --author 'rpm-build ' \ -m '%{name}-%{version} base' COUNT=$(grep '\.patch$' $PATCHLIST | wc -l) if [ $COUNT -ne $PATCHCOUNT ]; then echo "Found $COUNT patches in $PATCHLIST, expected $PATCHCOUNT" exit 1 fi if [ $COUNT -gt 0 ]; then xargs git am <$PATCHLIST || exit 1 fi echo "Applied $COUNT patches" rm -f $PATCHLIST rm -rf .git %build %if %{with_xen} %define arg_xen --with-xen %else %define arg_xen --without-xen %endif %if %{with_qemu} %define arg_qemu --with-qemu %else %define arg_qemu --without-qemu %endif %if %{with_openvz} %define arg_openvz --with-openvz %else %define arg_openvz --without-openvz %endif %if %{with_lxc} %define arg_lxc --with-lxc %else %define arg_lxc --without-lxc %endif %if %{with_vbox} %define arg_vbox --with-vbox %else %define arg_vbox --without-vbox %endif %if %{with_libxl} %define arg_libxl --with-libxl %else %define arg_libxl --without-libxl %endif %if %{with_phyp} %define arg_phyp --with-phyp %else %define arg_phyp --without-phyp %endif %if %{with_esx} %define arg_esx --with-esx %else %define arg_esx --without-esx %endif %if %{with_hyperv} %define arg_hyperv --with-hyperv %else %define arg_hyperv --without-hyperv %endif %if %{with_vmware} %define arg_vmware --with-vmware %else %define arg_vmware --without-vmware %endif %if %{with_uml} %define arg_uml --with-uml %else %define arg_uml --without-uml %endif %if %{with_storage_rbd} %define arg_storage_rbd --with-storage-rbd %else %define arg_storage_rbd --without-storage-rbd %endif %if %{with_storage_sheepdog} %define arg_storage_sheepdog --with-storage-sheepdog %else %define arg_storage_sheepdog --without-storage-sheepdog %endif %if %{with_storage_gluster} %define arg_storage_gluster --with-storage-gluster %else %define arg_storage_gluster --without-storage-gluster %endif %if %{with_storage_zfs} %define arg_storage_zfs --with-storage-zfs %else %define arg_storage_zfs --without-storage-zfs %endif %if %{with_numactl} %define arg_numactl --with-numactl %else %define arg_numactl --without-numactl %endif %if %{with_numad} %define arg_numad --with-numad %else %define arg_numad --without-numad %endif %if %{with_fuse} %define arg_fuse --with-fuse %else %define arg_fuse --without-fuse %endif %if %{with_sanlock} %define arg_sanlock --with-sanlock %else %define arg_sanlock --without-sanlock %endif %if %{with_firewalld} %define arg_firewalld --with-firewalld %else %define arg_firewalld --without-firewalld %endif %if %{with_wireshark} %define arg_wireshark --with-wireshark-dissector %else %define arg_wireshark --without-wireshark-dissector %endif %if %{with_pm_utils} %define arg_pm_utils --with-pm-utils %else %define arg_pm_utils --without-pm-utils %endif %define when %(date +"%%F-%%T") %define where %(hostname) %define who %{?packager}%{!?packager:Unknown} %define arg_packager --with-packager="%{who}, %{when}, %{where}" %define arg_packager_version --with-packager-version="%{release}" %if %{with_systemd} %define arg_init_script --with-init-script=systemd %else %define arg_init_script --with-init-script=redhat %endif %if 0%{?fedora} || 0%{?rhel} >= 7 %define arg_selinux_mount --with-selinux-mount="/sys/fs/selinux" %else %define arg_selinux_mount --with-selinux-mount="/selinux" %endif %if 0%{?fedora} # Nightly firmware repo x86/OVMF LOADERS="/usr/share/edk2.git/ovmf-x64/OVMF_CODE-pure-efi.fd:/usr/share/edk2.git/ovmf-x64/OVMF_VARS-pure-efi.fd" # Nightly firmware repo aarch64/AAVMF LOADERS="$LOADERS:/usr/share/edk2.git/aarch64/QEMU_EFI-pflash.raw:/usr/share/edk2.git/aarch64/vars-template-pflash.raw" # Fedora official x86/OVMF LOADERS="$LOADERS:/usr/share/edk2/ovmf/OVMF_CODE.fd:/usr/share/edk2/ovmf/OVMF_VARS.fd" # Fedora official aarch64/AAVMF LOADERS="$LOADERS:/usr/share/edk2/aarch64/QEMU_EFI-pflash.raw:/usr/share/edk2/aarch64/vars-template-pflash.raw" %define arg_loader_nvram --with-loader-nvram="$LOADERS" %endif # place macros above and build commands below this comment %if 0%{?enable_autotools} autoreconf -if %endif rm -f po/stamp-po %configure %{?arg_xen} \ %{?arg_qemu} \ %{?arg_openvz} \ %{?arg_lxc} \ %{?arg_vbox} \ %{?arg_libxl} \ --with-sasl \ --with-avahi \ --with-polkit \ --with-libvirtd \ %{?arg_uml} \ %{?arg_phyp} \ %{?arg_esx} \ %{?arg_hyperv} \ %{?arg_vmware} \ --without-xenapi \ --without-vz \ --without-bhyve \ --with-interface \ --with-network \ --with-storage-fs \ --with-storage-lvm \ --with-storage-iscsi \ --with-storage-scsi \ --with-storage-disk \ --with-storage-mpath \ %{?arg_storage_rbd} \ %{?arg_storage_sheepdog} \ %{?arg_storage_gluster} \ %{?arg_storage_zfs} \ --without-storage-vstorage \ %{?arg_numactl} \ %{?arg_numad} \ --with-capng \ %{?arg_fuse} \ --with-netcf \ --with-selinux \ %{?arg_selinux_mount} \ --without-apparmor \ --without-hal \ --with-udev \ --with-yajl \ %{?arg_sanlock} \ --with-libpcap \ --with-macvtap \ --with-audit \ --with-dtrace \ --with-driver-modules \ %{?arg_firewalld} \ %{?arg_wireshark} \ %{?arg_pm_utils} \ --with-nss-plugin \ %{arg_packager} \ %{arg_packager_version} \ --with-qemu-user=%{qemu_user} \ --with-qemu-group=%{qemu_group} \ --with-tls-priority=%{tls_priority} \ %{?arg_loader_nvram} \ %{?enable_werror} \ --enable-expensive-tests \ %{arg_init_script} make %{?_smp_mflags} gzip -9 ChangeLog %install rm -fr %{buildroot} # Avoid using makeinstall macro as it changes prefixes rather than setting # DESTDIR. Newer make_install macro would be better but it's not available # on RHEL 5, thus we need to expand it here. make %{?_smp_mflags} install DESTDIR=%{?buildroot} SYSTEMD_UNIT_DIR=%{_unitdir} make %{?_smp_mflags} -C examples distclean rm -f $RPM_BUILD_ROOT%{_libdir}/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.a %if %{with_wireshark} %if 0%{fedora} >= 24 rm -f $RPM_BUILD_ROOT%{_libdir}/wireshark/plugins/libvirt.la %else rm -f $RPM_BUILD_ROOT%{_libdir}/wireshark/plugins/*/libvirt.la mv $RPM_BUILD_ROOT%{_libdir}/wireshark/plugins/*/libvirt.so \ $RPM_BUILD_ROOT%{_libdir}/wireshark/plugins/libvirt.so %endif %endif install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/ # We don't want to install /etc/libvirt/qemu/networks in the main %files list # because if the admin wants to delete the default network completely, we don't # want to end up re-incarnating it on every RPM upgrade. install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/ cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml # nwfilter files are installed in /usr/share/libvirt and copied to /etc in %post # to avoid verification errors on changed files in /etc install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/ cp -a $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/ # Strip auto-generated UUID - we need it generated per-install sed -i -e "//d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml %if ! %{with_qemu} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %endif %find_lang %{name} %if ! %{with_sanlock} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %endif %if ! %{with_lxc} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %endif %if ! %{with_qemu} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu %endif %if ! %{with_lxc} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc %endif %if ! %{with_libxl} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %endif %if ! %{with_uml} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml %endif # Copied into libvirt-docs subpackage eventually mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} libvirt-docs %ifarch %{power64} s390x x86_64 ia64 alpha sparc64 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp %endif %clean rm -fr %{buildroot} %check cd tests # These tests don't current work in a mock build root for i in nodeinfotest seclabeltest do rm -f $i printf 'int main(void) { return 0; }' > $i.c printf '#!/bin/sh\nexit 0\n' > $i chmod +x $i done if ! make %{?_smp_mflags} check VIR_TEST_DEBUG=1 then cat test-suite.log || true exit 1 fi %pre daemon # 'libvirt' group is just to allow password-less polkit access to # libvirtd. The uid number is irrelevant, so we use dynamic allocation # described at the above link. getent group libvirt >/dev/null || groupadd -r libvirt exit 0 %post daemon %if %{with_systemd} %if %{with_systemd_macros} %systemd_post virtlockd.socket virtlogd.socket libvirtd.service %else if [ $1 -eq 1 ] ; then # Initial installation /bin/systemctl enable \ virtlockd.socket \ virtlogd.socket \ libvirtd.service >/dev/null 2>&1 || : fi %endif %else %if %{with_cgconfig} # Starting with Fedora 16/RHEL-7, systemd automounts all cgroups, # and cgconfig is no longer a necessary service. %if 0%{?rhel} && 0%{?rhel} < 7 if [ "$1" -eq "1" ]; then /sbin/chkconfig cgconfig on fi %endif %endif /sbin/chkconfig --add libvirtd /sbin/chkconfig --add virtlogd /sbin/chkconfig --add virtlockd %endif %preun daemon %if %{with_systemd} %if %{with_systemd_macros} %systemd_preun libvirtd.service virtlogd.socket virtlogd.service virtlockd.socket virtlockd.service %else if [ $1 -eq 0 ] ; then # Package removal, not upgrade /bin/systemctl --no-reload disable \ libvirtd.service \ virtlogd.socket \ virtlogd.service \ virtlockd.socket \ virtlockd.service > /dev/null 2>&1 || : /bin/systemctl stop \ libvirtd.service \ virtlogd.socket \ virtlogd.service \ virtlockd.socket \ virtlockd.service > /dev/null 2>&1 || : fi %endif %else if [ $1 = 0 ]; then /sbin/service libvirtd stop 1>/dev/null 2>&1 /sbin/chkconfig --del libvirtd /sbin/service virtlogd stop 1>/dev/null 2>&1 /sbin/chkconfig --del virtlogd /sbin/service virtlockd stop 1>/dev/null 2>&1 /sbin/chkconfig --del virtlockd fi %endif %postun daemon %if %{with_systemd} /bin/systemctl daemon-reload >/dev/null 2>&1 || : if [ $1 -ge 1 ] ; then /bin/systemctl reload-or-try-restart virtlockd.service >/dev/null 2>&1 || : /bin/systemctl reload-or-try-restart virtlogd.service >/dev/null 2>&1 || : /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : fi %else if [ $1 -ge 1 ]; then /sbin/service virtlockd reload > /dev/null 2>&1 || : /sbin/service virtlogd reload > /dev/null 2>&1 || : /sbin/service libvirtd condrestart > /dev/null 2>&1 fi %endif %if %{with_systemd} %else %triggerpostun daemon -- libvirt-daemon < 1.2.1 if [ "$1" -ge "1" ]; then /sbin/service virtlockd reload > /dev/null 2>&1 || : /sbin/service virtlogd reload > /dev/null 2>&1 || : /sbin/service libvirtd condrestart > /dev/null 2>&1 fi %endif # In upgrade scenario we must explicitly enable virtlockd/virtlogd # sockets, if libvirtd is already enabled and start them if # libvirtd is running, otherwise you'll get failures to start # guests %triggerpostun daemon -- libvirt-daemon < 1.3.0 if [ $1 -ge 1 ] ; then %if %{with_systemd} /bin/systemctl is-enabled libvirtd.service 1>/dev/null 2>&1 && /bin/systemctl enable virtlogd.socket || : /bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 && /bin/systemctl start virtlogd.socket || : %else /sbin/chkconfig libvirtd 1>/dev/null 2>&1 && /sbin/chkconfig virtlogd on || : /sbin/service libvirtd status 1>/dev/null 2>&1 && /sbin/service virtlogd start || : %endif fi %post daemon-config-network if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then # see if the network used by default network creates a conflict, # and try to resolve it # NB: 192.168.122.0/24 is used in the default.xml template file; # do not modify any of those values here without also modifying # them in the template. orig_sub=122 sub=${orig_sub} nl=' ' routes="${nl}$(ip route show | cut -d' ' -f1)${nl}" case ${routes} in *"${nl}192.168.${orig_sub}.0/24${nl}"*) # there was a match, so we need to look for an unused subnet for new_sub in $(seq 124 254); do case ${routes} in *"${nl}192.168.${new_sub}.0/24${nl}"*) ;; *) sub=$new_sub break; ;; esac done ;; *) ;; esac UUID=`/usr/bin/uuidgen` sed -e "s/${orig_sub}/${sub}/g" \ -e "s,,\n $UUID," \ < %{_datadir}/libvirt/networks/default.xml \ > %{_sysconfdir}/libvirt/qemu/networks/default.xml ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml # Make sure libvirt picks up the new network defininiton %if %{with_systemd} /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 ||: %else /sbin/service libvirtd condrestart > /dev/null 2>&1 || : %endif fi %post daemon-config-nwfilter cp %{_datadir}/libvirt/nwfilter/*.xml %{_sysconfdir}/libvirt/nwfilter/ # Make sure libvirt picks up the new nwfilter defininitons %if %{with_systemd} /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 ||: %else /sbin/service libvirtd condrestart > /dev/null 2>&1 || : %endif %if %{with_systemd} %triggerun -- libvirt < 0.9.4 %{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||: # If the package is allowed to autostart: /bin/systemctl --no-reload enable libvirtd.service >/dev/null 2>&1 ||: # Run these because the SysV package being removed won't do them /sbin/chkconfig --del libvirtd >/dev/null 2>&1 || : /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : %endif %if %{with_qemu} %pre daemon-driver-qemu # We want soft static allocation of well-known ids, as disk images # are commonly shared across NFS mounts by id rather than name; see # https://fedoraproject.org/wiki/Packaging:UsersAndGroups getent group kvm >/dev/null || groupadd -f -g 36 -r kvm getent group qemu >/dev/null || groupadd -f -g 107 -r qemu if ! getent passwd qemu >/dev/null; then if ! getent passwd 107 >/dev/null; then useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu else useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu fi fi exit 0 %endif %preun client %if %{with_systemd} %if %{with_systemd_macros} %systemd_preun libvirt-guests.service %endif %else if [ $1 = 0 ]; then /sbin/chkconfig --del libvirt-guests rm -f /var/lib/libvirt/libvirt-guests fi %endif %post client /sbin/ldconfig %if %{with_systemd} %if %{with_systemd_macros} %systemd_post libvirt-guests.service %endif %else /sbin/chkconfig --add libvirt-guests %endif %postun client /sbin/ldconfig %if %{with_systemd} %if %{with_systemd_macros} %systemd_postun libvirt-guests.service %endif %triggerun client -- libvirt < 0.9.4 %{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||: # If the package is allowed to autostart: /bin/systemctl --no-reload enable libvirt-guests.service >/dev/null 2>&1 ||: # Run this because the SysV package being removed won't do them /sbin/chkconfig --del libvirt-guests >/dev/null 2>&1 || : %endif %if %{with_sanlock} %post lock-sanlock if getent group sanlock > /dev/null ; then chmod 0770 %{_localstatedir}/lib/libvirt/sanlock chown root:sanlock %{_localstatedir}/lib/libvirt/sanlock fi %endif %if %{with_lxc} %pre login-shell getent group virtlogin >/dev/null || groupadd -r virtlogin exit 0 %endif %files %files docs %doc AUTHORS ChangeLog.gz NEWS README TODO %doc libvirt-docs/* # API docs %dir %{_datadir}/gtk-doc/html/libvirt/ %doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp %doc %{_datadir}/gtk-doc/html/libvirt/*.html %doc %{_datadir}/gtk-doc/html/libvirt/*.png %doc %{_datadir}/gtk-doc/html/libvirt/*.css %doc examples/hellolibvirt %doc examples/object-events %doc examples/dominfo %doc examples/domsuspend %doc examples/dommigrate %doc examples/openauth %doc examples/xml %doc examples/rename %doc examples/systemtap %doc examples/admin %files daemon %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/ %if %{with_systemd} %{_unitdir}/libvirtd.service %{_unitdir}/virt-guest-shutdown.target %{_unitdir}/virtlogd.service %{_unitdir}/virtlogd.socket %{_unitdir}/virtlockd.service %{_unitdir}/virtlockd.socket %else %{_sysconfdir}/rc.d/init.d/libvirtd %{_sysconfdir}/rc.d/init.d/virtlogd %{_sysconfdir}/rc.d/init.d/virtlockd %endif %doc daemon/libvirtd.upstart %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd %config(noreplace) %{_sysconfdir}/sysconfig/virtlogd %config(noreplace) %{_sysconfdir}/sysconfig/virtlockd %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf %config(noreplace) %{_prefix}/lib/sysctl.d/60-libvirtd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd %dir %{_datadir}/libvirt/ %ghost %dir %{_localstatedir}/run/libvirt/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/ %dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/ %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so %{_datadir}/augeas/lenses/libvirtd.aug %{_datadir}/augeas/lenses/tests/test_libvirtd.aug %{_datadir}/augeas/lenses/virtlogd.aug %{_datadir}/augeas/lenses/tests/test_virtlogd.aug %{_datadir}/augeas/lenses/virtlockd.aug %{_datadir}/augeas/lenses/tests/test_virtlockd.aug %{_datadir}/augeas/lenses/libvirt_lockd.aug %if %{with_qemu} %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug %endif %{_datadir}/polkit-1/actions/org.libvirt.unix.policy %{_datadir}/polkit-1/actions/org.libvirt.api.policy %{_datadir}/polkit-1/rules.d/50-libvirt.rules %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/ %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper %attr(0755, root, root) %{_sbindir}/libvirtd %attr(0755, root, root) %{_sbindir}/virtlogd %attr(0755, root, root) %{_sbindir}/virtlockd %{_mandir}/man8/libvirtd.8* %{_mandir}/man8/virtlogd.8* %{_mandir}/man8/virtlockd.8* %{_mandir}/man7/virkey*.7* %doc examples/polkit/*.rules %files daemon-config-network %dir %{_datadir}/libvirt/networks/ %{_datadir}/libvirt/networks/default.xml %files daemon-config-nwfilter %dir %{_datadir}/libvirt/nwfilter/ %{_datadir}/libvirt/nwfilter/*.xml %ghost %{_sysconfdir}/libvirt/nwfilter/*.xml %files daemon-driver-interface %{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so %files daemon-driver-network %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart %ghost %dir %{_localstatedir}/run/libvirt/network/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/ %attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper %{_libdir}/%{name}/connection-driver/libvirt_driver_network.so %files daemon-driver-nodedev %{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so %files daemon-driver-nwfilter %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/ %ghost %dir %{_localstatedir}/run/libvirt/network/ %{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so %files daemon-driver-secret %{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so %files daemon-driver-storage %files daemon-driver-storage-core %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper %{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_fs.so %files daemon-driver-storage-disk %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_disk.so %files daemon-driver-storage-logical %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_logical.so %files daemon-driver-storage-scsi %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_scsi.so %files daemon-driver-storage-iscsi %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi.so %files daemon-driver-storage-mpath %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_mpath.so %if %{with_storage_gluster} %files daemon-driver-storage-gluster %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_gluster.so %endif %if %{with_storage_rbd} %files daemon-driver-storage-rbd %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_rbd.so %endif %if %{with_storage_sheepdog} %files daemon-driver-storage-sheepdog %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_sheepdog.so %endif %if %{with_storage_zfs} %files daemon-driver-storage-zfs %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_zfs.so %endif %if %{with_qemu} %files daemon-driver-qemu %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/ %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu %ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/ %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/ %{_datadir}/augeas/lenses/libvirtd_qemu.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so %endif %if %{with_lxc} %files daemon-driver-lxc %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/ %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc %ghost %dir %{_localstatedir}/run/libvirt/lxc/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/ %{_datadir}/augeas/lenses/libvirtd_lxc.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %attr(0755, root, root) %{_libexecdir}/libvirt_lxc %{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so %endif %if %{with_uml} %files daemon-driver-uml %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/ %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml %ghost %dir %{_localstatedir}/run/libvirt/uml/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/ %{_libdir}/%{name}/connection-driver/libvirt_driver_uml.so %endif %if %{with_xen} %files daemon-driver-xen %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/ %{_libdir}/%{name}/connection-driver/libvirt_driver_xen.so %endif %if %{with_libxl} %files daemon-driver-libxl %config(noreplace) %{_sysconfdir}/libvirt/libxl.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.libxl %config(noreplace) %{_sysconfdir}/libvirt/libxl-lockd.conf %{_datadir}/augeas/lenses/libvirtd_libxl.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/ %ghost %dir %{_localstatedir}/run/libvirt/libxl/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/ %{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so %endif %if %{with_vbox} %files daemon-driver-vbox %{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so %endif %if %{with_qemu_tcg} %files daemon-qemu %endif %if %{with_qemu_kvm} %files daemon-kvm %endif %if %{with_lxc} %files daemon-lxc %endif %if %{with_uml} %files daemon-uml %endif %if %{with_xen} || %{with_libxl} %files daemon-xen %endif %if %{with_vbox} %files daemon-vbox %endif %if %{with_sanlock} %files lock-sanlock %if %{with_qemu} %config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf %endif %if %{with_libxl} %config(noreplace) %{_sysconfdir}/libvirt/libxl-sanlock.conf %endif %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so %{_datadir}/augeas/lenses/libvirt_sanlock.aug %{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/sanlock %{_sbindir}/virt-sanlock-cleanup %{_mandir}/man8/virt-sanlock-cleanup.8* %attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper %endif %files client %{_mandir}/man1/virsh.1* %{_mandir}/man1/virt-xml-validate.1* %{_mandir}/man1/virt-pki-validate.1* %{_mandir}/man1/virt-host-validate.1* %{_bindir}/virsh %{_bindir}/virt-xml-validate %{_bindir}/virt-pki-validate %{_bindir}/virt-host-validate %{_datadir}/systemtap/tapset/libvirt_probes*.stp %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp %{_datadir}/systemtap/tapset/libvirt_functions.stp %if %{with_systemd} %{_unitdir}/libvirt-guests.service %else %{_sysconfdir}/rc.d/init.d/libvirt-guests %endif %config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests %attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh %files libs -f %{name}.lang %doc COPYING COPYING.LESSER %config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf %config(noreplace) %{_sysconfdir}/libvirt/libvirt-admin.conf %{_libdir}/libvirt.so.* %{_libdir}/libvirt-qemu.so.* %{_libdir}/libvirt-lxc.so.* %{_libdir}/libvirt-admin.so.* %dir %{_datadir}/libvirt/ %dir %{_datadir}/libvirt/schemas/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/ %{_datadir}/libvirt/schemas/basictypes.rng %{_datadir}/libvirt/schemas/capability.rng %{_datadir}/libvirt/schemas/cputypes.rng %{_datadir}/libvirt/schemas/domain.rng %{_datadir}/libvirt/schemas/domaincaps.rng %{_datadir}/libvirt/schemas/domaincommon.rng %{_datadir}/libvirt/schemas/domainsnapshot.rng %{_datadir}/libvirt/schemas/interface.rng %{_datadir}/libvirt/schemas/network.rng %{_datadir}/libvirt/schemas/networkcommon.rng %{_datadir}/libvirt/schemas/nodedev.rng %{_datadir}/libvirt/schemas/nwfilter.rng %{_datadir}/libvirt/schemas/secret.rng %{_datadir}/libvirt/schemas/storagecommon.rng %{_datadir}/libvirt/schemas/storagepool.rng %{_datadir}/libvirt/schemas/storagevol.rng %{_datadir}/libvirt/cpu_map.xml %{_datadir}/libvirt/test-screenshot.png %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf %files admin %{_mandir}/man1/virt-admin.1* %{_bindir}/virt-admin %if %{with_wireshark} %files wireshark %{_libdir}/wireshark/plugins/libvirt.so %endif %files nss %{_libdir}/libnss_libvirt.so.2 %{_libdir}/libnss_libvirt_guest.so.2 %if %{with_lxc} %files login-shell %attr(4750, root, virtlogin) %{_bindir}/virt-login-shell %config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf %{_mandir}/man1/virt-login-shell.1* %endif %files devel %{_libdir}/libvirt.so %{_libdir}/libvirt-admin.so %{_libdir}/libvirt-qemu.so %{_libdir}/libvirt-lxc.so %dir %{_includedir}/libvirt %{_includedir}/libvirt/virterror.h %{_includedir}/libvirt/libvirt.h %{_includedir}/libvirt/libvirt-admin.h %{_includedir}/libvirt/libvirt-common.h %{_includedir}/libvirt/libvirt-domain.h %{_includedir}/libvirt/libvirt-domain-snapshot.h %{_includedir}/libvirt/libvirt-event.h %{_includedir}/libvirt/libvirt-host.h %{_includedir}/libvirt/libvirt-interface.h %{_includedir}/libvirt/libvirt-network.h %{_includedir}/libvirt/libvirt-nodedev.h %{_includedir}/libvirt/libvirt-nwfilter.h %{_includedir}/libvirt/libvirt-secret.h %{_includedir}/libvirt/libvirt-storage.h %{_includedir}/libvirt/libvirt-stream.h %{_includedir}/libvirt/libvirt-qemu.h %{_includedir}/libvirt/libvirt-lxc.h %{_libdir}/pkgconfig/libvirt.pc %{_libdir}/pkgconfig/libvirt-admin.pc %{_libdir}/pkgconfig/libvirt-qemu.pc %{_libdir}/pkgconfig/libvirt-lxc.pc %dir %{_datadir}/libvirt/api/ %{_datadir}/libvirt/api/libvirt-api.xml %{_datadir}/libvirt/api/libvirt-admin-api.xml %{_datadir}/libvirt/api/libvirt-qemu-api.xml %{_datadir}/libvirt/api/libvirt-lxc-api.xml # Needed building python bindings %doc docs/libvirt-api.xml %changelog * Wed Aug 2 2017 Daniel P. Berrange - 3.6.0-1 - Rebase to version 3.6.0 * Sun Jul 30 2017 Florian Weimer - 3.5.0-4 - Rebuild with binutils fix for ppc64le (#1475636) * Tue Jul 25 2017 Daniel P. Berrange - 3.5.0-3 - Disabled RBD on i386, arm, ppc64 (rhbz #1474743) * Mon Jul 17 2017 Cole Robinson - 3.5.0-2 - Rebuild for xen 4.9 * Thu Jul 6 2017 Daniel P. Berrange - 3.5.0-1 - Rebase to version 3.5.0 * Fri Jun 2 2017 Daniel P. Berrange - 3.4.0-1 - Rebase to version 3.4.0 * Mon May 8 2017 Daniel P. Berrange - 3.3.0-1 - Rebase to version 3.3.0 * Mon Apr 3 2017 Daniel P. Berrange - 3.2.0-1 - Rebase to version 3.2.0 * Fri Mar 3 2017 Daniel P. Berrange - 3.1.0-1 - Rebase to version 3.1.0 * Fri Feb 10 2017 Fedora Release Engineering - 3.0.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild * Thu Jan 19 2017 Daniel P. Berrange - 3.0.0-1 - Rebase to version 3.0.0 * Thu Jan 12 2017 Igor Gnatenko - 2.5.0-3 - Rebuild for readline 7.x * Thu Dec 8 2016 Daniel P. Berrange - 2.5.0-2 - Rebuild to pick up new libxen* soname * Mon Dec 5 2016 Daniel P. Berrange - 2.5.0-1 - Rebase to version 2.5.0 * Wed Nov 2 2016 Daniel P. Berrange - 2.4.0-1 - Rebase to version 2.4.0 * Thu Oct 6 2016 Daniel P. Berrange - 2.3.0-1 - Rebase to version 2.3.0 * Mon Sep 5 2016 Daniel P. Berrange - 2.2.0-1 - Rebase to version 2.2.0 * Tue Aug 2 2016 Daniel P. Berrange - 2.1.0-1 - Rebase to version 2.1.0 * Sat Jul 23 2016 Richard W.M. Jones - 2.0.0-2 - Rebuild to attempt to fix 'nothing provides libxenctrl.so.4.6()(64bit) needed by libvirt-daemon-2.0.0-1.fc25.x86_64' * Fri Jul 1 2016 Daniel P. Berrange - 2.0.0-1 - Rebase to version 2.0.0 - Temporarily disable wireshark plugin due to broken wireshark headers (rhbz #1351984) * Mon Jun 13 2016 Richard W.M. Jones - 1.3.5-2 - Rebuild against new glibc (see https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/thread/VUOTESHSWFRCYPXIVG6BSMAUITS7QCK2/). * Mon Jun 6 2016 Daniel P. Berrange - 1.3.5-1 - Rebase to version 1.3.5 - Pull in refactored, simplified spec file from upstream * Fri May 20 2016 Cole Robinson - 1.3.4-2 - Fix libxl video config via virt-install (bz #1334557) - Advertise fedora edk2 firmware builds to apps (bz #1335395) * Mon May 02 2016 Cole Robinson - 1.3.4-1 - Rebased to version 1.3.4 * Tue Apr 19 2016 Cole Robinson - 1.3.3-3 - Fix 200ms performance problem when waiting for monitor socket of new domains. * Thu Apr 14 2016 Cole Robinson - 1.3.3-2 - libvirt assigns same address to two PCI devices (bz #1325085) - Fix build with -Werror * Thu Apr 07 2016 Cole Robinson - 1.3.3-1 - Rebased to version 1.3.3 * Thu Mar 17 2016 Cole Robinson - 1.3.2-3 - Fix qemu:///session disconnect after 30 seconds - Fix 'permission denied' errors trying to unlink disk images (bz #1289327) - Fix qemu:///session connect race failures (bz #1271183) - driver: log missing modules as INFO, not WARN (bz #1274849) * Wed Mar 9 2016 Richard W.M. Jones - 1.3.2-2 - Add fix for RHBZ#1315606. * Tue Mar 1 2016 Daniel Berrange - 1.3.2-1 - Update to 1.3.2 release * Thu Feb 04 2016 Fedora Release Engineering - 1.3.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild * Tue Jan 19 2016 Daniel Berrange - 1.3.1-1 - Update to 1.3.1 release * Wed Dec 9 2015 Daniel Berrange - 1.3.0-1 - Update to 1.3.0 release * Wed Nov 11 2015 Cole Robinson - 1.2.21-1 - Update to 1.2.21 release * Sun Oct 11 2015 Cole Robinson - 1.2.20-2 - Rebuild for xen 4.6 * Fri Oct 2 2015 Daniel P. Berrange - 1.2.20-1 - Update to 1.2.20 release * Wed Sep 2 2015 Daniel P. Berrange - 1.2.19-1 - Update to 1.2.19 release * Tue Aug 4 2015 Daniel P. Berrange - 1.2.18-1 - Update to 1.2.18 release * Wed Jul 29 2015 Richard W.M. Jones - 1.2.17-2 - Fix 'Cannot write data: Broken pipe [code=38 domain=7]' (RHBZ#1247746). * Tue Jul 14 2015 Cole Robinson - 1.2.17-1 - numerous improvements and refactoring of the parallels driver - hardening of vcpu code - hardening of migration code - a lot of improvement and bug fixes * Sun Jul 12 2015 Peter Robinson 1.2.16-3 - Rebuild (aarch64) * Tue Jun 16 2015 Daniel P. Berrange - 1.2.16-2 - Rebuild for libwsman soname bump * Mon Jun 01 2015 Daniel P. Berrange - 1.2.16-1 - Update to 1.2.16 release * Thu May 07 2015 Richard W.M. Jones - 1.2.15-2 - Add Cole Robinson's patch to fix arch selection (bz# 1219198, bz#1219191) * Mon May 04 2015 Cole Robinson - 1.2.15-1 - Rebased to version 1.2.15 * Wed Apr 15 2015 Cole Robinson - 1.2.14-2 - Fix LXC domain startup (bz #1210397) - Fix race starting multiple session daemons (bz #1200149) - Fix change-media success messages - Strip invalid control codes from XML (bz #1066564, bz #1184131) * Thu Apr 02 2015 Cole Robinson - 1.2.14-1 - Rebased to version 1.2.14 * Tue Mar 10 2015 Cole Robinson - 1.2.13-2 - Fix connecting to qemu:///session (bz #1198244) * Mon Mar 02 2015 Cole Robinson - 1.2.13-1 - Rebased to version 1.2.13 - lot of improvements around NUMA code - a lot of improvement and bug fixes * Tue Feb 3 2015 Daniel P. Berrange - 1.2.12-2 - Rebuild for changed xen soname * Tue Jan 27 2015 Daniel P. Berrange - 1.2.12-1 - Update to 1.2.12 release