# -*- rpm-spec -*- # This spec file assumes you are building for Fedora 20 or newer, # or for RHEL 6 or newer. It may need some tweaks for other distros. # If neither fedora nor rhel was defined, try to guess them from dist %if (0%{?fedora} && 0%{?fedora} >= 20) || (0%{?rhel} && 0%{?rhel} >= 6) %define supported_platform 1 %else %define supported_platform 0 %endif # Default to skipping autoreconf. Distros can change just this one line # (or provide a command-line override) if they backport any patches that # touch configure.ac or Makefile.am. %{!?enable_autotools:%global enable_autotools 0} # The hypervisor drivers that run in libvirtd %define with_xen 0%{!?_without_xen:1} %define with_qemu 0%{!?_without_qemu:1} %define with_lxc 0%{!?_without_lxc:1} %define with_uml 0%{!?_without_uml:1} %define with_libxl 0%{!?_without_libxl:1} %define with_vbox 0%{!?_without_vbox:1} %define with_qemu_tcg %{with_qemu} %define qemu_kvm_arches %{ix86} x86_64 %if 0%{?fedora} %define qemu_kvm_arches %{ix86} x86_64 %{power64} s390x %{arm} aarch64 %endif %if 0%{?rhel} %define with_qemu_tcg 0 %define qemu_kvm_arches x86_64 %if 0%{?rhel} >= 7 %define qemu_kvm_arches x86_64 %{power64} %endif %endif %ifarch %{qemu_kvm_arches} %define with_qemu_kvm %{with_qemu} %else %define with_qemu_kvm 0 %endif %if ! %{with_qemu_tcg} && ! %{with_qemu_kvm} %define with_qemu 0 %endif # Then the hypervisor drivers that run outside libvirtd, in libvirt.so %define with_openvz 0%{!?_without_openvz:1} %define with_vmware 0%{!?_without_vmware:1} %define with_phyp 0%{!?_without_phyp:1} %define with_esx 0%{!?_without_esx:1} %define with_hyperv 0%{!?_without_hyperv:1} # Then the secondary host drivers, which run inside libvirtd %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_storage_rbd 0%{!?_without_storage_rbd:1} %else %define with_storage_rbd 0 %endif %if 0%{?fedora} %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:1} %else %define with_storage_sheepdog 0 %endif %define with_storage_gluster 0%{!?_without_storage_gluster:1} %define with_numactl 0%{!?_without_numactl:1} # A few optional bits off by default, we enable later %define with_fuse 0%{!?_without_fuse:0} %define with_cgconfig 0%{!?_without_cgconfig:0} %define with_sanlock 0%{!?_without_sanlock:0} %define with_systemd 0%{!?_without_systemd:0} %define with_numad 0%{!?_without_numad:0} %define with_firewalld 0%{!?_without_firewalld:0} %define with_libssh2 0%{!?_without_libssh2:0} %define with_wireshark 0%{!?_without_wireshark:0} %define with_pm_utils 1 # Finally set the OS / architecture specific special cases # Xen is available only on i386 x86_64 ia64 %ifnarch %{ix86} x86_64 ia64 %define with_xen 0 %define with_libxl 0 %endif # vbox is available only on i386 x86_64 %ifnarch %{ix86} x86_64 %define with_vbox 0 %endif # Numactl is not available on s390[x] and ARM %ifarch s390 s390x %{arm} %define with_numactl 0 %endif # libgfapi is built only on x86_64 on rhel %ifnarch x86_64 %if 0%{?rhel} %define with_storage_gluster 0 %endif %endif # librados and librbd are built only on x86_64 on rhel %ifnarch x86_64 %if 0%{?rhel} >= 7 %define with_storage_rbd 0 %endif %endif # RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor, # VMware, libxenserver (xenapi), libxenlight (Xen 4.1 and newer), # or HyperV. %if 0%{?rhel} %define with_openvz 0 %define with_vbox 0 %define with_uml 0 %define with_phyp 0 %define with_vmware 0 %define with_xenapi 0 %define with_libxl 0 %define with_hyperv 0 %define with_vz 0 %endif # Fedora 17 / RHEL-7 are first where we use systemd. Although earlier # Fedora has systemd, libvirt still used sysvinit there. %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_systemd 1 %define with_pm_utils 0 %endif # Fedora 18 / RHEL-7 are first where firewalld support is enabled %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_firewalld 1 %endif # RHEL-6 stopped including Xen on all archs. %if 0%{?rhel} %define with_xen 0 %endif # fuse is used to provide virtualized /proc for LXC %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_fuse 0%{!?_without_fuse:1} %endif # Enable sanlock library for lock management with QEMU # Sanlock is available only on arches where kvm is available for RHEL %if 0%{?fedora} %define with_sanlock 0%{!?_without_sanlock:1} %endif %if 0%{?rhel} %ifarch %{qemu_kvm_arches} %define with_sanlock 0%{!?_without_sanlock:1} %endif %endif # Enable libssh2 transport for new enough distros %if 0%{?fedora} %define with_libssh2 0%{!?_without_libssh2:1} %endif # Enable wireshark plugins for all distros shipping libvirt 1.2.2 or newer # Temp disabled due to https://bugzilla.redhat.com/show_bug.cgi?id=1351984 %if 0%{?fedora-disabled} >= 21 %define with_wireshark 0%{!?_without_wireshark:1} %endif %if %{with_qemu} || %{with_lxc} || %{with_uml} # numad is used to manage the CPU and memory placement dynamically, # it's not available on s390[x] and ARM. %ifnarch s390 s390x %{arm} %define with_numad 0%{!?_without_numad:1} %endif %endif # Pull in cgroups config system %if %{with_qemu} || %{with_lxc} %define with_cgconfig 0%{!?_without_cgconfig:1} %endif # Force QEMU to run as non-root %define qemu_user qemu %define qemu_group qemu %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_systemd_macros 1 %else %define with_systemd_macros 0 %endif # RHEL releases provide stable tool chains and so it is safe to turn # compiler warning into errors without being worried about frequent # changes in reported warnings %if 0%{?rhel} %define enable_werror --enable-werror %else %define enable_werror --disable-werror %endif %if 0%{?fedora} >= 21 %define tls_priority "@SYSTEM" %else %define tls_priority "NORMAL" %endif Summary: Library providing a simple virtualization API Name: libvirt Version: 2.0.0 Release: 1%{?dist}%{?extra_release} License: LGPLv2+ Group: Development/Libraries BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root URL: http://libvirt.org/ %if %(echo %{version} | grep -o \\. | wc -l) == 3 %define mainturl stable_updates/ %endif Source: http://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.xz Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-config-network = %{version}-%{release} Requires: libvirt-daemon-config-nwfilter = %{version}-%{release} %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif %if %{with_lxc} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} %endif %if %{with_qemu} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} %endif %if %{with_uml} Requires: libvirt-daemon-driver-uml = %{version}-%{release} %endif %if %{with_xen} Requires: libvirt-daemon-driver-xen = %{version}-%{release} %endif %if %{with_vbox} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} %endif Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-client = %{version}-%{release} # All build-time requirements. Run-time requirements are # listed against each sub-RPM %if 0%{?enable_autotools} BuildRequires: autoconf BuildRequires: automake BuildRequires: gettext-devel BuildRequires: libtool BuildRequires: /usr/bin/pod2man %endif BuildRequires: git BuildRequires: perl BuildRequires: python %if %{with_systemd} BuildRequires: systemd-units %endif %if %{with_xen} || %{with_libxl} BuildRequires: xen-devel %endif BuildRequires: libxml2-devel BuildRequires: xhtml1-dtds BuildRequires: libxslt BuildRequires: readline-devel BuildRequires: ncurses-devel BuildRequires: gettext BuildRequires: libtasn1-devel %if (0%{?rhel} && 0%{?rhel} < 7) BuildRequires: libgcrypt-devel %endif BuildRequires: gnutls-devel BuildRequires: libattr-devel # For pool-build probing for existing pools BuildRequires: libblkid-devel >= 2.17 # for augparse, optionally used in testing BuildRequires: augeas %if 0%{?fedora} || 0%{?rhel} >= 7 BuildRequires: systemd-devel >= 185 %else BuildRequires: libudev-devel >= 145 %endif BuildRequires: libpciaccess-devel >= 0.10.9 BuildRequires: yajl-devel %if %{with_sanlock} BuildRequires: sanlock-devel >= 2.4 %endif BuildRequires: libpcap-devel %if 0%{?rhel} && 0%{?rhel} < 7 BuildRequires: libnl-devel %else BuildRequires: libnl3-devel %endif BuildRequires: avahi-devel BuildRequires: libselinux-devel BuildRequires: dnsmasq >= 2.41 BuildRequires: iptables %if 0%{?rhel} && 0%{?rhel} < 7 BuildRequires: iptables-ipv6 %endif BuildRequires: radvd BuildRequires: ebtables BuildRequires: module-init-tools BuildRequires: cyrus-sasl-devel %if 0%{?fedora} || 0%{?rhel} >= 7 # F22 polkit-devel doesn't pull in polkit anymore, which we need for pkcheck BuildRequires: polkit >= 0.112 BuildRequires: polkit-devel >= 0.112 %else BuildRequires: polkit-devel >= 0.93 %endif # For mount/umount in FS driver BuildRequires: util-linux %if %{with_qemu} # From QEMU RPMs BuildRequires: /usr/bin/qemu-img %else %if %{with_xen} # From Xen RPMs BuildRequires: /usr/sbin/qcow-create %endif %endif # For LVM drivers BuildRequires: lvm2 # For ISCSI driver BuildRequires: iscsi-initiator-utils # For disk driver BuildRequires: parted-devel # For Multipath support BuildRequires: device-mapper-devel %if %{with_storage_rbd} %if 0%{?rhel} >= 7 BuildRequires: librados2-devel BuildRequires: librbd1-devel %else BuildRequires: ceph-devel %endif %endif %if %{with_storage_gluster} BuildRequires: glusterfs-api-devel >= 3.4.1 BuildRequires: glusterfs-devel >= 3.4.1 %endif %if %{with_storage_sheepdog} BuildRequires: sheepdog %endif %if %{with_numactl} # For QEMU/LXC numa info BuildRequires: numactl-devel %endif BuildRequires: libcap-ng-devel >= 0.5.0 %if %{with_fuse} BuildRequires: fuse-devel >= 2.8.6 %endif %if %{with_phyp} || %{with_libssh2} BuildRequires: libssh2-devel >= 1.3.0 %endif %if 0%{?fedora} || 0%{?rhel} >= 7 BuildRequires: netcf-devel >= 0.2.2 %else BuildRequires: netcf-devel >= 0.1.8 %endif %if %{with_esx} BuildRequires: libcurl-devel %endif %if %{with_hyperv} BuildRequires: libwsman-devel >= 2.2.3 %endif BuildRequires: audit-libs-devel # we need /usr/sbin/dtrace BuildRequires: systemtap-sdt-devel # For mount/umount in FS driver BuildRequires: util-linux # For showmount in FS driver (netfs discovery) BuildRequires: nfs-utils # Communication with the firewall and polkit daemons use DBus BuildRequires: dbus-devel # Fedora build root suckage BuildRequires: gawk # For storage wiping with different algorithms BuildRequires: scrub %if %{with_numad} BuildRequires: numad %endif %if %{with_wireshark} BuildRequires: wireshark-devel %endif Provides: bundled(gnulib) %description Libvirt is a C toolkit to interact with the virtualization capabilities of recent versions of Linux (and other OSes). The main package includes the libvirtd server exporting the virtualization support. %package docs Summary: API reference and website documentation Group: Development/Libraries %description docs Includes the API reference for the libvirt C library, and a complete copy of the libvirt.org website documentation. %package daemon Summary: Server side daemon and supporting files for libvirt library Group: Development/Libraries # All runtime requirements for the libvirt package (runtime requrements # for subpackages are listed later in those subpackages) # The client side, i.e. shared libs and virsh are in a subpackage Requires: %{name}-client = %{version}-%{release} # for modprobe of pci devices Requires: module-init-tools # for /sbin/ip & /sbin/tc Requires: iproute Requires: avahi-libs %if 0%{?fedora} || 0%{?rhel} >= 7 Requires: polkit >= 0.112 %else Requires: polkit >= 0.93 %endif %if %{with_cgconfig} Requires: libcgroup %endif %ifarch %{ix86} x86_64 ia64 # For virConnectGetSysinfo Requires: dmidecode %endif # For service management %if %{with_systemd} Requires(post): systemd-units Requires(post): systemd-sysv Requires(preun): systemd-units Requires(postun): systemd-units %endif %if %{with_numad} Requires: numad %endif # libvirtd depends on 'messagebus' service Requires: dbus # For uid creation during pre Requires(pre): shadow-utils %description daemon Server side daemon required to manage the virtualization capabilities of recent versions of Linux. Requires a hypervisor specific sub-RPM for specific drivers. %package daemon-config-network Summary: Default configuration files for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} %description daemon-config-network Default configuration files for setting up NAT based networking %package daemon-config-nwfilter Summary: Network filter configuration files for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} %description daemon-config-nwfilter Network filter configuration files for cleaning guest traffic %package daemon-driver-network Summary: Network driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: dnsmasq >= 2.41 Requires: radvd Requires: iptables %if 0%{?rhel} && 0%{?rhel} < 7 Requires: iptables-ipv6 %endif %description daemon-driver-network The network driver plugin for the libvirtd daemon, providing an implementation of the virtual network APIs using the Linux bridge capabilities. %package daemon-driver-nwfilter Summary: Nwfilter driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: iptables %if 0%{?rhel} && 0%{?rhel} < 7 Requires: iptables-ipv6 %endif Requires: ebtables %description daemon-driver-nwfilter The nwfilter driver plugin for the libvirtd daemon, providing an implementation of the firewall APIs using the ebtables, iptables and ip6tables capabilities %package daemon-driver-nodedev Summary: Nodedev driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} # needed for device enumeration %if 0%{?fedora} || 0%{?rhel} >= 7 Requires: systemd >= 185 %else Requires: udev >= 145 %endif %description daemon-driver-nodedev The nodedev driver plugin for the libvirtd daemon, providing an implementation of the node device APIs using the udev capabilities. %package daemon-driver-interface Summary: Interface driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} %if (0%{?fedora} || 0%{?rhel} >= 7) Requires: netcf-libs >= 0.2.2 %endif %description daemon-driver-interface The interface driver plugin for the libvirtd daemon, providing an implementation of the network interface APIs using the netcf library %package daemon-driver-secret Summary: Secret driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-secret The secret driver plugin for the libvirtd daemon, providing an implementation of the secret key APIs. %package daemon-driver-storage Summary: Storage driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: nfs-utils # For mkfs Requires: util-linux # For glusterfs %if 0%{?fedora} Requires: glusterfs-client >= 2.0.1 %endif # For LVM drivers Requires: lvm2 # For ISCSI driver Requires: iscsi-initiator-utils # For disk driver Requires: parted Requires: device-mapper # For multipath support Requires: device-mapper %if %{with_storage_sheepdog} # For Sheepdog support Requires: sheepdog %endif %if %{with_qemu} # From QEMU RPMs Requires: /usr/bin/qemu-img %else %if %{with_xen} # From Xen RPMs Requires: /usr/sbin/qcow-create %endif %endif %description daemon-driver-storage The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using LVM, iSCSI, parted and more. %if %{with_qemu} %package daemon-driver-qemu Summary: Qemu driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} # There really is a hard cross-driver dependency here Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: /usr/bin/qemu-img # For image compression Requires: gzip Requires: bzip2 Requires: lzop Requires: xz %if 0%{?fedora} >= 24 Requires: systemd-container %endif %description daemon-driver-qemu The qemu driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using QEMU %endif %if %{with_lxc} %package daemon-driver-lxc Summary: LXC driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} # There really is a hard cross-driver dependency here Requires: libvirt-daemon-driver-network = %{version}-%{release} %if 0%{?fedora} >= 24 Requires: systemd-container %endif %description daemon-driver-lxc The LXC driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using the Linux kernel %endif %if %{with_uml} %package daemon-driver-uml Summary: Uml driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-uml The UML driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using User Mode Linux %endif %if %{with_xen} %package daemon-driver-xen Summary: Xen driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-xen The Xen driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using Xen %endif %if %{with_vbox} %package daemon-driver-vbox Summary: VirtualBox driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-vbox The vbox driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using VirtualBox %endif %if %{with_libxl} %package daemon-driver-libxl Summary: Libxl driver plugin for the libvirtd daemon Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-libxl The Libxl driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using Libxl %endif %if %{with_qemu_tcg} %package daemon-qemu Summary: Server side daemon & driver required to run QEMU guests Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: qemu %description daemon-qemu Server side daemon and driver required to manage the virtualization capabilities of the QEMU TCG emulators %endif %if %{with_qemu_kvm} %package daemon-kvm Summary: Server side daemon & driver required to run KVM guests Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: qemu-kvm %description daemon-kvm Server side daemon and driver required to manage the virtualization capabilities of the KVM hypervisor %endif %if %{with_lxc} %package daemon-lxc Summary: Server side daemon & driver required to run LXC guests Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-lxc Server side daemon and driver required to manage the virtualization capabilities of LXC %endif %if %{with_uml} %package daemon-uml Summary: Server side daemon & driver required to run UML guests Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-uml = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} # There are no UML kernel RPMs in Fedora/RHEL to depend on. %description daemon-uml Server side daemon and driver required to manage the virtualization capabilities of UML %endif %if %{with_xen} || %{with_libxl} %package daemon-xen Summary: Server side daemon & driver required to run XEN guests Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} %if %{with_xen} Requires: libvirt-daemon-driver-xen = %{version}-%{release} %endif %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: xen %description daemon-xen Server side daemon and driver required to manage the virtualization capabilities of XEN %endif %if %{with_vbox} %package daemon-vbox Summary: Server side daemon & driver required to run VirtualBox guests Group: Development/Libraries Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-vbox Server side daemon and driver required to manage the virtualization capabilities of VirtualBox %endif %package client Summary: Client side library and utilities of the libvirt library Group: Development/Libraries Requires: readline Requires: ncurses # So remote clients can access libvirt over SSH tunnel # (client invokes 'nc' against the UNIX socket on the server) Requires: nc # Needed by /usr/libexec/libvirt-guests.sh script. Requires: gettext # Needed by virt-pki-validate script. Requires: gnutls-utils %if %{with_pm_utils} # Needed for probing the power management features of the host. Requires: pm-utils %endif Requires: cyrus-sasl # Not technically required, but makes 'out-of-box' config # work correctly & doesn't have onerous dependencies Requires: cyrus-sasl-md5 %description client Shared libraries and client binaries needed to access to the virtualization capabilities of recent versions of Linux (and other OSes). %if %{with_wireshark} %package wireshark Summary: Wireshark dissector plugin for libvirt RPC transactions Group: Development/Libraries Requires: wireshark >= 1.12.6-4 Requires: %{name}-client = %{version}-%{release} %description wireshark Wireshark dissector plugin for better analysis of libvirt RPC traffic. %endif %if %{with_lxc} %package login-shell Summary: Login shell for connecting users to an LXC container Group: Development/Libraries Requires: %{name}-client = %{version}-%{release} %description login-shell Provides the set-uid virt-login-shell binary that is used to connect a user to an LXC container when they login, by switching namespaces. %endif %package devel Summary: Libraries, includes, etc. to compile with the libvirt library Group: Development/Libraries Requires: %{name}-client = %{version}-%{release} Requires: pkgconfig %description devel Include header files & development libraries for the libvirt C library. %if %{with_sanlock} %package lock-sanlock Summary: Sanlock lock manager plugin for QEMU driver Group: Development/Libraries Requires: sanlock >= 2.4 #for virt-sanlock-cleanup require augeas Requires: augeas Requires: %{name}-daemon = %{version}-%{release} Requires: %{name}-client = %{version}-%{release} %description lock-sanlock Includes the Sanlock lock manager plugin for the QEMU driver %endif %package nss Summary: Libvirt plugin for Name Service Switch Group: Development/Libraries Requires: libvirt-daemon-driver-network = %{version}-%{release} %description nss Libvirt plugin for NSS for translating domain names into IP addresses. %prep %if ! %{supported_platform} echo "This RPM requires either Fedora >= 20 or RHEL >= 6" exit 1 %endif %setup -q # Patches have to be stored in a temporary file because RPM has # a limit on the length of the result of any macro expansion; # if the string is longer, it's silently cropped %{lua: tmp = os.tmpname(); f = io.open(tmp, "w+"); count = 0; for i, p in ipairs(patches) do f:write(p.."\n"); count = count + 1; end; f:close(); print("PATCHCOUNT="..count.."\n") print("PATCHLIST="..tmp.."\n") } git init -q git config user.name rpm-build git config user.email rpm-build git config gc.auto 0 git add . git commit -q -a --author 'rpm-build ' \ -m '%{name}-%{version} base' COUNT=$(grep '\.patch$' $PATCHLIST | wc -l) if [ $COUNT -ne $PATCHCOUNT ]; then echo "Found $COUNT patches in $PATCHLIST, expected $PATCHCOUNT" exit 1 fi if [ $COUNT -gt 0 ]; then xargs git am <$PATCHLIST || exit 1 fi echo "Applied $COUNT patches" rm -f $PATCHLIST rm -rf .git %build %if %{with_xen} %define arg_xen --with-xen %else %define arg_xen --without-xen %endif %if %{with_qemu} %define arg_qemu --with-qemu %else %define arg_qemu --without-qemu %endif %if %{with_openvz} %define arg_openvz --with-openvz %else %define arg_openvz --without-openvz %endif %if %{with_lxc} %define arg_lxc --with-lxc %else %define arg_lxc --without-lxc %endif %if %{with_vbox} %define arg_vbox --with-vbox %else %define arg_vbox --without-vbox %endif %if %{with_libxl} %define arg_libxl --with-libxl %else %define arg_libxl --without-libxl %endif %if %{with_phyp} %define arg_phyp --with-phyp %else %define arg_phyp --without-phyp %endif %if %{with_esx} %define arg_esx --with-esx %else %define arg_esx --without-esx %endif %if %{with_hyperv} %define arg_hyperv --with-hyperv %else %define arg_hyperv --without-hyperv %endif %if %{with_vmware} %define arg_vmware --with-vmware %else %define arg_vmware --without-vmware %endif %if %{with_uml} %define arg_uml --with-uml %else %define arg_uml --without-uml %endif %if %{with_storage_rbd} %define arg_storage_rbd --with-storage-rbd %else %define arg_storage_rbd --without-storage-rbd %endif %if %{with_storage_sheepdog} %define arg_storage_sheepdog --with-storage-sheepdog %else %define arg_storage_sheepdog --without-storage-sheepdog %endif %if %{with_storage_gluster} %define arg_storage_gluster --with-storage-gluster %else %define arg_storage_gluster --without-storage-gluster %endif %if %{with_numactl} %define arg_numactl --with-numactl %else %define arg_numactl --without-numactl %endif %if %{with_numad} %define arg_numad --with-numad %else %define arg_numad --without-numad %endif %if %{with_fuse} %define arg_fuse --with-fuse %else %define arg_fuse --without-fuse %endif %if %{with_sanlock} %define arg_sanlock --with-sanlock %else %define arg_sanlock --without-sanlock %endif %if %{with_firewalld} %define arg_firewalld --with-firewalld %else %define arg_firewalld --without-firewalld %endif %if %{with_wireshark} %define arg_wireshark --with-wireshark-dissector %else %define arg_wireshark --without-wireshark-dissector %endif %if %{with_pm_utils} %define arg_pm_utils --with-pm-utils %else %define arg_pm_utils --without-pm-utils %endif %define when %(date +"%%F-%%T") %define where %(hostname) %define who %{?packager}%{!?packager:Unknown} %define arg_packager --with-packager="%{who}, %{when}, %{where}" %define arg_packager_version --with-packager-version="%{release}" %if %{with_systemd} %define arg_init_script --with-init-script=systemd %else %define arg_init_script --with-init-script=redhat %endif %if 0%{?fedora} || 0%{?rhel} >= 7 %define arg_selinux_mount --with-selinux-mount="/sys/fs/selinux" %else %define arg_selinux_mount --with-selinux-mount="/selinux" %endif %if 0%{?fedora} # Nightly firmware repo x86/OVMF LOADERS="/usr/share/edk2.git/ovmf-x64/OVMF_CODE-pure-efi.fd:/usr/share/edk2.git/ovmf-x64/OVMF_VARS-pure-efi.fd" # Nightly firmware repo aarch64/AAVMF LOADERS="$LOADERS:/usr/share/edk2.git/aarch64/QEMU_EFI-pflash.raw:/usr/share/edk2.git/aarch64/vars-template-pflash.raw" # Fedora official x86/OVMF LOADERS="$LOADERS:/usr/share/edk2/ovmf/OVMF_CODE.fd:/usr/share/edk2/ovmf/OVMF_VARS.fd" # Fedora official aarch64/AAVMF LOADERS="$LOADERS:/usr/share/edk2/aarch64/QEMU_EFI-pflash.raw:/usr/share/edk2/aarch64/vars-template-pflash.raw" %define arg_loader_nvram --with-loader-nvram="$LOADERS" %endif # place macros above and build commands below this comment %if 0%{?enable_autotools} autoreconf -if %endif rm -f po/stamp-po %configure %{?arg_xen} \ %{?arg_qemu} \ %{?arg_openvz} \ %{?arg_lxc} \ %{?arg_vbox} \ %{?arg_libxl} \ --with-sasl \ --with-avahi \ --with-polkit \ --with-libvirtd \ %{?arg_uml} \ %{?arg_phyp} \ %{?arg_esx} \ %{?arg_hyperv} \ %{?arg_vmware} \ --without-xenapi \ --without-vz \ --without-bhyve \ --with-interface \ --with-network \ --with-storage-fs \ --with-storage-lvm \ --with-storage-iscsi \ --with-storage-disk \ --with-storage-mpath \ %{?arg_storage_rbd} \ %{?arg_storage_sheepdog} \ %{?arg_storage_gluster} \ %{?arg_numactl} \ %{?arg_numad} \ --with-capng \ %{?arg_fuse} \ --with-netcf \ --with-selinux \ %{?arg_selinux_mount} \ --without-apparmor \ --without-hal \ --with-udev \ --with-yajl \ %{?arg_sanlock} \ --with-libpcap \ --with-macvtap \ --with-audit \ --with-dtrace \ --with-driver-modules \ %{?arg_firewalld} \ %{?arg_wireshark} \ %{?arg_pm_utils} \ --with-nss-plugin \ %{arg_packager} \ %{arg_packager_version} \ --with-qemu-user=%{qemu_user} \ --with-qemu-group=%{qemu_group} \ --with-tls-priority=%{tls_priority} \ %{?arg_loader_nvram} \ %{?enable_werror} \ --enable-expensive-tests \ %{arg_init_script} make %{?_smp_mflags} gzip -9 ChangeLog %install rm -fr %{buildroot} # Avoid using makeinstall macro as it changes prefixes rather than setting # DESTDIR. Newer make_install macro would be better but it's not available # on RHEL 5, thus we need to expand it here. make install DESTDIR=%{?buildroot} SYSTEMD_UNIT_DIR=%{_unitdir} make -C examples distclean rm -f $RPM_BUILD_ROOT%{_libdir}/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a %if %{with_wireshark} rm -f $RPM_BUILD_ROOT%{_libdir}/wireshark/plugins/*/libvirt.la mv $RPM_BUILD_ROOT%{_libdir}/wireshark/plugins/*/libvirt.so \ $RPM_BUILD_ROOT%{_libdir}/wireshark/plugins/libvirt.so %endif install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/ # We don't want to install /etc/libvirt/qemu/networks in the main %files list # because if the admin wants to delete the default network completely, we don't # want to end up re-incarnating it on every RPM upgrade. install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/ cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml # Strip auto-generated UUID - we need it generated per-install sed -i -e "//d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml %if ! %{with_qemu} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %endif %find_lang %{name} %if ! %{with_sanlock} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %endif %if ! %{with_lxc} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %endif %if ! %{with_qemu} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu %endif %if ! %{with_lxc} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc %endif %if ! %{with_libxl} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %endif %if ! %{with_uml} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml %endif # Copied into libvirt-docs subpackage eventually mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} libvirt-docs %ifarch %{power64} s390x x86_64 ia64 alpha sparc64 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp %endif %clean rm -fr %{buildroot} %check cd tests make # These tests don't current work in a mock build root for i in nodeinfotest seclabeltest do rm -f $i printf 'int main(void) { return 0; }' > $i.c printf '#!/bin/sh\nexit 0\n' > $i chmod +x $i done if ! make check VIR_TEST_DEBUG=1 then cat test-suite.log || true exit 1 fi %pre daemon # 'libvirt' group is just to allow password-less polkit access to # libvirtd. The uid number is irrelevant, so we use dynamic allocation # described at the above link. getent group libvirt >/dev/null || groupadd -r libvirt exit 0 %post daemon %if %{with_systemd} %if %{with_systemd_macros} %systemd_post virtlockd.socket virtlogd.socket libvirtd.service %else if [ $1 -eq 1 ] ; then # Initial installation /bin/systemctl enable \ virtlockd.socket \ virtlogd.socket \ libvirtd.service >/dev/null 2>&1 || : fi %endif %else %if %{with_cgconfig} # Starting with Fedora 16/RHEL-7, systemd automounts all cgroups, # and cgconfig is no longer a necessary service. %if 0%{?rhel} && 0%{?rhel} < 7 if [ "$1" -eq "1" ]; then /sbin/chkconfig cgconfig on fi %endif %endif /sbin/chkconfig --add libvirtd /sbin/chkconfig --add virtlogd /sbin/chkconfig --add virtlockd %endif %preun daemon %if %{with_systemd} %if %{with_systemd_macros} %systemd_preun libvirtd.service virtlogd.socket virtlogd.service virtlockd.socket virtlockd.service %else if [ $1 -eq 0 ] ; then # Package removal, not upgrade /bin/systemctl --no-reload disable \ libvirtd.service \ virtlogd.socket \ virtlogd.service \ virtlockd.socket \ virtlockd.service > /dev/null 2>&1 || : /bin/systemctl stop \ libvirtd.service \ virtlogd.socket \ virtlogd.service \ virtlockd.socket \ virtlockd.service > /dev/null 2>&1 || : fi %endif %else if [ $1 = 0 ]; then /sbin/service libvirtd stop 1>/dev/null 2>&1 /sbin/chkconfig --del libvirtd /sbin/service virtlogd stop 1>/dev/null 2>&1 /sbin/chkconfig --del virtlogd /sbin/service virtlockd stop 1>/dev/null 2>&1 /sbin/chkconfig --del virtlockd fi %endif %postun daemon %if %{with_systemd} /bin/systemctl daemon-reload >/dev/null 2>&1 || : if [ $1 -ge 1 ] ; then /bin/systemctl reload-or-try-restart virtlockd.service >/dev/null 2>&1 || : /bin/systemctl reload-or-try-restart virtlogd.service >/dev/null 2>&1 || : /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : fi %else if [ $1 -ge 1 ]; then /sbin/service virtlockd reload > /dev/null 2>&1 || : /sbin/service virtlogd reload > /dev/null 2>&1 || : /sbin/service libvirtd condrestart > /dev/null 2>&1 fi %endif %if %{with_systemd} %else %triggerpostun daemon -- libvirt-daemon < 1.2.1 if [ "$1" -ge "1" ]; then /sbin/service virtlockd reload > /dev/null 2>&1 || : /sbin/service virtlogd reload > /dev/null 2>&1 || : /sbin/service libvirtd condrestart > /dev/null 2>&1 fi %endif # In upgrade scenario we must explicitly enable virtlockd/virtlogd # sockets, if libvirtd is already enabled and start them if # libvirtd is running, otherwise you'll get failures to start # guests %triggerpostun daemon -- libvirt-daemon < 1.3.0 if [ $1 -ge 1 ] ; then %if %{with_systemd} /bin/systemctl is-enabled libvirtd.service 1>/dev/null 2>&1 && /bin/systemctl enable virtlogd.socket || : /bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 && /bin/systemctl start virtlogd.socket || : %else /sbin/chkconfig libvirtd 1>/dev/null 2>&1 && /sbin/chkconfig virtlogd on || : /sbin/service libvirtd status 1>/dev/null 2>&1 && /sbin/service virtlogd start || : %endif fi %post daemon-config-network if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then # see if the network used by default network creates a conflict, # and try to resolve it # NB: 192.168.122.0/24 is used in the default.xml template file; # do not modify any of those values here without also modifying # them in the template. orig_sub=122 sub=${orig_sub} nl=' ' routes="${nl}$(ip route show | cut -d' ' -f1)${nl}" case ${routes} in *"${nl}192.168.${orig_sub}.0/24${nl}"*) # there was a match, so we need to look for an unused subnet for new_sub in $(seq 124 254); do case ${routes} in *"${nl}192.168.${new_sub}.0/24${nl}"*) ;; *) sub=$new_sub break; ;; esac done ;; *) ;; esac UUID=`/usr/bin/uuidgen` sed -e "s/${orig_sub}/${sub}/g" \ -e "s,,\n $UUID," \ < %{_datadir}/libvirt/networks/default.xml \ > %{_sysconfdir}/libvirt/qemu/networks/default.xml ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml # Make sure libvirt picks up the new network defininiton %if %{with_systemd} /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 ||: %else /sbin/service libvirtd condrestart > /dev/null 2>&1 || : %endif fi %if %{with_systemd} %triggerun -- libvirt < 0.9.4 %{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||: # If the package is allowed to autostart: /bin/systemctl --no-reload enable libvirtd.service >/dev/null 2>&1 ||: # Run these because the SysV package being removed won't do them /sbin/chkconfig --del libvirtd >/dev/null 2>&1 || : /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : %endif %if %{with_qemu} %pre daemon-driver-qemu # We want soft static allocation of well-known ids, as disk images # are commonly shared across NFS mounts by id rather than name; see # https://fedoraproject.org/wiki/Packaging:UsersAndGroups getent group kvm >/dev/null || groupadd -f -g 36 -r kvm getent group qemu >/dev/null || groupadd -f -g 107 -r qemu if ! getent passwd qemu >/dev/null; then if ! getent passwd 107 >/dev/null; then useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu else useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu fi fi exit 0 %endif %preun client %if %{with_systemd} %if %{with_systemd_macros} %systemd_preun libvirt-guests.service %endif %else if [ $1 = 0 ]; then /sbin/chkconfig --del libvirt-guests rm -f /var/lib/libvirt/libvirt-guests fi %endif %post client /sbin/ldconfig %if %{with_systemd} %if %{with_systemd_macros} %systemd_post libvirt-guests.service %endif %else /sbin/chkconfig --add libvirt-guests %endif %postun client /sbin/ldconfig %if %{with_systemd} %if %{with_systemd_macros} %systemd_postun libvirt-guests.service %endif %triggerun client -- libvirt < 0.9.4 %{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||: # If the package is allowed to autostart: /bin/systemctl --no-reload enable libvirt-guests.service >/dev/null 2>&1 ||: # Run this because the SysV package being removed won't do them /sbin/chkconfig --del libvirt-guests >/dev/null 2>&1 || : %endif %if %{with_sanlock} %post lock-sanlock if getent group sanlock > /dev/null ; then chmod 0770 %{_localstatedir}/lib/libvirt/sanlock chown root:sanlock %{_localstatedir}/lib/libvirt/sanlock fi %endif %if %{with_lxc} %pre login-shell getent group virtlogin >/dev/null || groupadd -r virtlogin exit 0 %endif %files %files docs %doc AUTHORS ChangeLog.gz NEWS README TODO %doc libvirt-docs/* # API docs %dir %{_datadir}/gtk-doc/html/libvirt/ %doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp %doc %{_datadir}/gtk-doc/html/libvirt/*.html %doc %{_datadir}/gtk-doc/html/libvirt/*.png %doc %{_datadir}/gtk-doc/html/libvirt/*.css %doc examples/hellolibvirt %doc examples/object-events %doc examples/dominfo %doc examples/domsuspend %doc examples/dommigrate %doc examples/openauth %doc examples/xml %doc examples/rename %doc examples/systemtap %doc examples/admin %files daemon %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/ %if %{with_systemd} %{_unitdir}/libvirtd.service %{_unitdir}/virtlogd.service %{_unitdir}/virtlogd.socket %{_unitdir}/virtlockd.service %{_unitdir}/virtlockd.socket %else %{_sysconfdir}/rc.d/init.d/libvirtd %{_sysconfdir}/rc.d/init.d/virtlogd %{_sysconfdir}/rc.d/init.d/virtlockd %endif %doc daemon/libvirtd.upstart %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd %config(noreplace) %{_sysconfdir}/sysconfig/virtlogd %config(noreplace) %{_sysconfdir}/sysconfig/virtlockd %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf %config(noreplace) %{_prefix}/lib/sysctl.d/60-libvirtd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd %dir %{_datadir}/libvirt/ %ghost %dir %{_localstatedir}/run/libvirt/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/ %dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/ %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so %{_datadir}/augeas/lenses/libvirtd.aug %{_datadir}/augeas/lenses/tests/test_libvirtd.aug %{_datadir}/augeas/lenses/virtlogd.aug %{_datadir}/augeas/lenses/tests/test_virtlogd.aug %{_datadir}/augeas/lenses/virtlockd.aug %{_datadir}/augeas/lenses/tests/test_virtlockd.aug %{_datadir}/augeas/lenses/libvirt_lockd.aug %if %{with_qemu} %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug %endif %{_datadir}/polkit-1/actions/org.libvirt.unix.policy %{_datadir}/polkit-1/actions/org.libvirt.api.policy %{_datadir}/polkit-1/rules.d/50-libvirt.rules %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/ %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper %attr(0755, root, root) %{_sbindir}/libvirtd %attr(0755, root, root) %{_sbindir}/virtlogd %attr(0755, root, root) %{_sbindir}/virtlockd %{_mandir}/man8/libvirtd.8* %{_mandir}/man8/virtlogd.8* %{_mandir}/man8/virtlockd.8* %doc examples/polkit/*.rules %files daemon-config-network %dir %{_datadir}/libvirt/networks/ %{_datadir}/libvirt/networks/default.xml %files daemon-config-nwfilter %{_sysconfdir}/libvirt/nwfilter/*.xml %files daemon-driver-interface %{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so %files daemon-driver-network %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart %ghost %dir %{_localstatedir}/run/libvirt/network/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/ %attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper %{_libdir}/%{name}/connection-driver/libvirt_driver_network.so %files daemon-driver-nodedev %{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so %files daemon-driver-nwfilter %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/ %ghost %dir %{_localstatedir}/run/libvirt/network/ %{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so %files daemon-driver-secret %{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so %files daemon-driver-storage %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper %{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so %if %{with_qemu} %files daemon-driver-qemu %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/ %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu %ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/ %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/ %{_datadir}/augeas/lenses/libvirtd_qemu.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so %endif %if %{with_lxc} %files daemon-driver-lxc %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/ %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc %ghost %dir %{_localstatedir}/run/libvirt/lxc/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/ %{_datadir}/augeas/lenses/libvirtd_lxc.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %attr(0755, root, root) %{_libexecdir}/libvirt_lxc %{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so %endif %if %{with_uml} %files daemon-driver-uml %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/ %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml %ghost %dir %{_localstatedir}/run/libvirt/uml/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/ %{_libdir}/%{name}/connection-driver/libvirt_driver_uml.so %endif %if %{with_xen} %files daemon-driver-xen %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/ %{_libdir}/%{name}/connection-driver/libvirt_driver_xen.so %endif %if %{with_libxl} %files daemon-driver-libxl %config(noreplace) %{_sysconfdir}/libvirt/libxl.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.libxl %config(noreplace) %{_sysconfdir}/libvirt/libxl-lockd.conf %{_datadir}/augeas/lenses/libvirtd_libxl.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/ %ghost %dir %{_localstatedir}/run/libvirt/libxl/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/ %{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so %endif %if %{with_vbox} %files daemon-driver-vbox %{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so %endif %if %{with_qemu_tcg} %files daemon-qemu %endif %if %{with_qemu_kvm} %files daemon-kvm %endif %if %{with_lxc} %files daemon-lxc %endif %if %{with_uml} %files daemon-uml %endif %if %{with_xen} || %{with_libxl} %files daemon-xen %endif %if %{with_vbox} %files daemon-vbox %endif %if %{with_sanlock} %files lock-sanlock %if %{with_qemu} %config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf %endif %if %{with_libxl} %config(noreplace) %{_sysconfdir}/libvirt/libxl-sanlock.conf %endif %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so %{_datadir}/augeas/lenses/libvirt_sanlock.aug %{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/sanlock %{_sbindir}/virt-sanlock-cleanup %{_mandir}/man8/virt-sanlock-cleanup.8* %attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper %endif %files client -f %{name}.lang %doc COPYING COPYING.LESSER %config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf %config(noreplace) %{_sysconfdir}/libvirt/libvirt-admin.conf %{_mandir}/man1/virsh.1* %{_mandir}/man1/virt-admin.1* %{_mandir}/man1/virt-xml-validate.1* %{_mandir}/man1/virt-pki-validate.1* %{_mandir}/man1/virt-host-validate.1* %{_bindir}/virsh %{_bindir}/virt-admin %{_bindir}/virt-xml-validate %{_bindir}/virt-pki-validate %{_bindir}/virt-host-validate %{_libdir}/libvirt.so.* %{_libdir}/libvirt-qemu.so.* %{_libdir}/libvirt-lxc.so.* %{_libdir}/libvirt-admin.so.* %{_datadir}/systemtap/tapset/libvirt_probes*.stp %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp %{_datadir}/systemtap/tapset/libvirt_functions.stp %dir %{_datadir}/libvirt/ %dir %{_datadir}/libvirt/schemas/ %{_datadir}/libvirt/schemas/basictypes.rng %{_datadir}/libvirt/schemas/capability.rng %{_datadir}/libvirt/schemas/domain.rng %{_datadir}/libvirt/schemas/domaincaps.rng %{_datadir}/libvirt/schemas/domaincommon.rng %{_datadir}/libvirt/schemas/domainsnapshot.rng %{_datadir}/libvirt/schemas/interface.rng %{_datadir}/libvirt/schemas/network.rng %{_datadir}/libvirt/schemas/networkcommon.rng %{_datadir}/libvirt/schemas/nodedev.rng %{_datadir}/libvirt/schemas/nwfilter.rng %{_datadir}/libvirt/schemas/secret.rng %{_datadir}/libvirt/schemas/storagecommon.rng %{_datadir}/libvirt/schemas/storagepool.rng %{_datadir}/libvirt/schemas/storagevol.rng %{_datadir}/libvirt/cpu_map.xml %{_datadir}/libvirt/libvirtLogo.png %if %{with_systemd} %{_unitdir}/libvirt-guests.service %else %{_sysconfdir}/rc.d/init.d/libvirt-guests %endif %config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests %attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/ %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf %if %{with_wireshark} %files wireshark %{_libdir}/wireshark/plugins/libvirt.so %endif %files nss %{_libdir}/libnss_libvirt.so.2 %if %{with_lxc} %files login-shell %attr(4750, root, virtlogin) %{_bindir}/virt-login-shell %config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf %{_mandir}/man1/virt-login-shell.1* %endif %files devel %{_libdir}/libvirt.so %{_libdir}/libvirt-admin.so %{_libdir}/libvirt-qemu.so %{_libdir}/libvirt-lxc.so %dir %{_includedir}/libvirt %{_includedir}/libvirt/virterror.h %{_includedir}/libvirt/libvirt.h %{_includedir}/libvirt/libvirt-admin.h %{_includedir}/libvirt/libvirt-common.h %{_includedir}/libvirt/libvirt-domain.h %{_includedir}/libvirt/libvirt-domain-snapshot.h %{_includedir}/libvirt/libvirt-event.h %{_includedir}/libvirt/libvirt-host.h %{_includedir}/libvirt/libvirt-interface.h %{_includedir}/libvirt/libvirt-network.h %{_includedir}/libvirt/libvirt-nodedev.h %{_includedir}/libvirt/libvirt-nwfilter.h %{_includedir}/libvirt/libvirt-secret.h %{_includedir}/libvirt/libvirt-storage.h %{_includedir}/libvirt/libvirt-stream.h %{_includedir}/libvirt/libvirt-qemu.h %{_includedir}/libvirt/libvirt-lxc.h %{_libdir}/pkgconfig/libvirt.pc %{_libdir}/pkgconfig/libvirt-admin.pc %{_libdir}/pkgconfig/libvirt-qemu.pc %{_libdir}/pkgconfig/libvirt-lxc.pc %dir %{_datadir}/libvirt/api/ %{_datadir}/libvirt/api/libvirt-api.xml %{_datadir}/libvirt/api/libvirt-admin-api.xml %{_datadir}/libvirt/api/libvirt-qemu-api.xml %{_datadir}/libvirt/api/libvirt-lxc-api.xml # Needed building python bindings %doc docs/libvirt-api.xml %changelog * Fri Jul 1 2016 Daniel P. Berrange - 2.0.0-1 - Rebase to version 2.0.0 - Temporarily disable wireshark plugin due to broken wireshark headers (rhbz #1351984) * Mon Jun 13 2016 Richard W.M. Jones - 1.3.5-2 - Rebuild against new glibc (see https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/thread/VUOTESHSWFRCYPXIVG6BSMAUITS7QCK2/). * Mon Jun 6 2016 Daniel P. Berrange - 1.3.5-1 - Rebase to version 1.3.5 - Pull in refactored, simplified spec file from upstream * Fri May 20 2016 Cole Robinson - 1.3.4-2 - Fix libxl video config via virt-install (bz #1334557) - Advertise fedora edk2 firmware builds to apps (bz #1335395) * Mon May 02 2016 Cole Robinson - 1.3.4-1 - Rebased to version 1.3.4 * Tue Apr 19 2016 Cole Robinson - 1.3.3-3 - Fix 200ms performance problem when waiting for monitor socket of new domains. * Thu Apr 14 2016 Cole Robinson - 1.3.3-2 - libvirt assigns same address to two PCI devices (bz #1325085) - Fix build with -Werror * Thu Apr 07 2016 Cole Robinson - 1.3.3-1 - Rebased to version 1.3.3 * Thu Mar 17 2016 Cole Robinson - 1.3.2-3 - Fix qemu:///session disconnect after 30 seconds - Fix 'permission denied' errors trying to unlink disk images (bz #1289327) - Fix qemu:///session connect race failures (bz #1271183) - driver: log missing modules as INFO, not WARN (bz #1274849) * Wed Mar 9 2016 Richard W.M. Jones - 1.3.2-2 - Add fix for RHBZ#1315606. * Tue Mar 1 2016 Daniel Berrange - 1.3.2-1 - Update to 1.3.2 release * Thu Feb 04 2016 Fedora Release Engineering - 1.3.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild * Tue Jan 19 2016 Daniel Berrange - 1.3.1-1 - Update to 1.3.1 release * Wed Dec 9 2015 Daniel Berrange - 1.3.0-1 - Update to 1.3.0 release * Wed Nov 11 2015 Cole Robinson - 1.2.21-1 - Update to 1.2.21 release * Sun Oct 11 2015 Cole Robinson - 1.2.20-2 - Rebuild for xen 4.6 * Fri Oct 2 2015 Daniel P. Berrange - 1.2.20-1 - Update to 1.2.20 release * Wed Sep 2 2015 Daniel P. Berrange - 1.2.19-1 - Update to 1.2.19 release * Tue Aug 4 2015 Daniel P. Berrange - 1.2.18-1 - Update to 1.2.18 release * Wed Jul 29 2015 Richard W.M. Jones - 1.2.17-2 - Fix 'Cannot write data: Broken pipe [code=38 domain=7]' (RHBZ#1247746). * Tue Jul 14 2015 Cole Robinson - 1.2.17-1 - numerous improvements and refactoring of the parallels driver - hardening of vcpu code - hardening of migration code - a lot of improvement and bug fixes * Sun Jul 12 2015 Peter Robinson 1.2.16-3 - Rebuild (aarch64) * Tue Jun 16 2015 Daniel P. Berrange - 1.2.16-2 - Rebuild for libwsman soname bump * Mon Jun 01 2015 Daniel P. Berrange - 1.2.16-1 - Update to 1.2.16 release * Thu May 07 2015 Richard W.M. Jones - 1.2.15-2 - Add Cole Robinson's patch to fix arch selection (bz# 1219198, bz#1219191) * Mon May 04 2015 Cole Robinson - 1.2.15-1 - Rebased to version 1.2.15 * Wed Apr 15 2015 Cole Robinson - 1.2.14-2 - Fix LXC domain startup (bz #1210397) - Fix race starting multiple session daemons (bz #1200149) - Fix change-media success messages - Strip invalid control codes from XML (bz #1066564, bz #1184131) * Thu Apr 02 2015 Cole Robinson - 1.2.14-1 - Rebased to version 1.2.14 * Tue Mar 10 2015 Cole Robinson - 1.2.13-2 - Fix connecting to qemu:///session (bz #1198244) * Mon Mar 02 2015 Cole Robinson - 1.2.13-1 - Rebased to version 1.2.13 - lot of improvements around NUMA code - a lot of improvement and bug fixes * Tue Feb 3 2015 Daniel P. Berrange - 1.2.12-2 - Rebuild for changed xen soname * Tue Jan 27 2015 Daniel P. Berrange - 1.2.12-1 - Update to 1.2.12 release * Mon Dec 15 2014 Daniel P. Berrange - 1.2.11-1 - Update to 1.2.11 release - Use git to apply patches * Fri Nov 21 2014 Cole Robinson - 1.2.10-3 - Allow arm/aarch64 with UEFI * Sat Nov 15 2014 Cole Robinson - 1.2.10-2 - Fix caps probing when KVM is disabled (bz #1160318) - ppc64le fixes (bz #1163439) * Mon Nov 3 2014 Daniel Veillard - 1.2.10 - upstream release * Thu Oct 30 2014 Cole Robinson - 1.2.9-4 - Fix creating i686 guest with x86_64 emulator (bz #1153797) - Fix tests with latest libxml2 * Thu Oct 09 2014 Cole Robinson - 1.2.9-3 - Fix selinux errors with /dev/net/tun (bz #1147057) * Fri Oct 03 2014 Cole Robinson - 1.2.9-2 - Fix specifying CPU for qemu aarch64 * Wed Sep 24 2014 Cole Robinson - 1.2.8-6 - Fix labelling host devices (bz #1145968) * Tue Sep 23 2014 Cole Robinson - 1.2.8-5 - Fix specifying CPU for qemu aarch64 * Thu Sep 18 2014 Cole Robinson - 1.2.8-4 - Don't mess up labelling of /dev/net/tun (bz #1141879) - pflash/nvram support for UEFI/OVMF * Wed Sep 17 2014 Cole Robinson - 1.2.8-3 - Fix preun script (bz #1142367) * Mon Sep 15 2014 Cole Robinson - 1.2.8-2 - Generate non-colliding network IP range at RPM install time (bz #811967) - Fix directory creation at session daemon startup (bz #1139672) - Disable wireshark building, currently broken on f21/rawhide * Fri Sep 5 2014 Daniel P. Berrange - 1.2.8-1 - Update to 1.2.8 release * Sun Aug 17 2014 Fedora Release Engineering - 1.2.7-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild * Tue Aug 12 2014 Cole Robinson - 1.2.7-1 - Rebased to version 1.2.7 * Tue Jul 15 2014 Peter Robinson 1.2.6-2 - Enable kvm on aarch64 - Cleanup F-16/18 conditionals * Wed Jul 2 2014 Daniel P. Berrange - 1.2.6-1 - Update to 1.2.6 release * Sat Jun 07 2014 Fedora Release Engineering - 1.2.5-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild * Mon Jun 2 2014 Daniel P. Berrange - 1.2.5-1 - Update to 1.2.5 release * Tue May 6 2014 Cole Robinson - 1.2.4-1 - Update to 1.2.4 release * Fri Apr 11 2014 Cole Robinson - 1.2.3-2 - Fix LXC from throwing error System lacks NETNS support (bz #1084902) * Tue Apr 01 2014 Cole Robinson - 1.2.3-1 - Rebased to version 1.2.3 * Mon Mar 24 2014 Cole Robinson - 1.2.2-2 - Rebuild for xen 4.4 * Mon Mar 3 2014 Daniel P. Berrange - 1.2.2-1 - Update to 1.2.2 release - Add wireshark plugin sub-RPM - Add missing sub-RPMs deps for config packages * Mon Jan 27 2014 Cole Robinson - 1.2.1-2 - Rebuild for openwsman soname bump * Tue Jan 21 2014 Daniel P. Berrange - 1.2.1-1 - Update to 1.2.1 release * Mon Dec 2 2013 Daniel P. Berrange - 1.2.0-1 - Update to 1.2.0 release with python in a separate srpm * Tue Nov 12 2013 Cole Robinson - 1.1.4-2 - virsh nodedev-detach fails if device has no driver (bz #1028629) * Mon Nov 4 2013 Daniel Veillard - 1.1.4-1 - upstream release of 1.1.4 - Add support for AArch64 architecture - Various improvements on test code and test driver - a lot of bug fixes and various improvements * Sun Oct 06 2013 Cole Robinson - 1.1.3-2 - Allow QoS change with update-device (bz #1014200) - Fix nwfilter crash during firewalld install (bz #1014762) - Fix crash with nographics (bz #1014088) * Tue Oct 1 2013 Daniel Veillard - 1.1.3-1 - VMware: Initial VMware Fusion support and various improvements - libvirt: add new public API virConnectGetCPUModelNames - various libxl driver improvements - LXC many container driver improvement - ARM cpu improvements - a lot of bug and leak fixes and various improvements * Tue Sep 24 2013 Cole Robinson - 1.1.2-4 - Fix snapshot restore when VM has disabled usb support (bz #1011520) * Mon Sep 23 2013 Cole Robinson - 1.1.2-3 - Sync with v1.1.2-maint - Rebuild for libswan soname bump (bz #1009701) - CVE-2013-4311: Insecure polkit usage (bz #1009539, bz #1005332) - CVE-2013-4296: Invalid free memory stats (bz #1006173, bz #1009667) - CVE-2013-4297: Invalid free in NBDDeviceAssociate (bz #1006505, bz #1006511) - Fix virsh block-commit abort (bz #1010056) * Wed Sep 18 2013 Daniel P. Berrange - 1.1.2-2 - Rebuild for soname break in openswman package * Mon Sep 2 2013 Daniel P. Berrange - 1.1.2-1 - Update to 1.1.2 release * Tue Aug 20 2013 Cole Robinson - 1.1.1-3 - Fix launching ARM guests on x86 (patches posted upstream, F20 feature) * Wed Aug 14 2013 Cole Robinson - 1.1.1-2 - CVE-2013-4239: xen: memory corruption in legacy driver (bz #996241, bz #996244) * Tue Jul 30 2013 Daniel P. Berrange - 1.1.1-1 - Update to 1.1.1 release * Sun Jul 28 2013 Dennis Gilmore - 1.1.0-5 - fix doc path in libvirt-python * Thu Jul 25 2013 Cole Robinson - 1.1.0-4 - CVE-2013-4153: Fix double free of returned JSON (bz #986408, bz #986383) - CVE-2013-4154: Crash of libvirtd if guest agent not configured (bz #986386, bz #986406) * Wed Jul 17 2013 Daniel P. Berrange - 1.1.0-3 - Rebuild for change in Xen library ABI/soname * Thu Jul 11 2013 Cole Robinson - 1.1.0-2 - CVE-2013-2230 libvirt: multiple registered events crash * Mon Jul 1 2013 Daniel Veillard - 1.1.0-1 - CVE-2013-2218: Fix crash listing network interfaces with filters - Fine grained ACL support for the API - Extensible migration APIs - various improvements in the Xen driver - agent based vCPU hotplug support - various bug fixes and improvements including localizations * Fri Jun 14 2013 Peter Robinson 1.0.6-3 - Enable KVM support on ARM * Sat Jun 08 2013 Cole Robinson - 1.0.6-2 - Drop bogus dep on vbox * Mon Jun 3 2013 Daniel P. Berrange - 1.0.6-1 - Update to 1.0.6 release * Sun May 19 2013 Cole Robinson - 1.0.5.1-1 - Rebased to version 1.0.5.1 - Follow updated packaging guidelines for user alloc (bz #924501) - CVE-2013-1962 Open files DoS (bz #963789, bz #953107) * Tue May 14 2013 Cole Robinson - 1.0.5-3 - Fix stream operations like screenshot (bz #960879) * Fri May 3 2013 Richard W.M. Jones - 1.0.5-2 - Fix network driver when using qemu:///session (bz #958907). * Thu May 2 2013 Daniel Veillard - 1.0.5-1 - Update to 1.0.5 release - add support for NVRAM device - Add XML config for resource partitions - Add support for TPM - NPIV storage migration support - various bug fixes and improvements including localizations * Mon Apr 1 2013 Daniel Veillard - 1.0.4-1 - Update to 1.0.4 release * Tue Mar 5 2013 Daniel P. Berrange - 1.0.3-1 - Update to 1.0.3 release * Thu Feb 28 2013 Richard W.M. Jones - 1.0.2-4 - Backport "qemu: check backing chains even when cgroup is omitted" (RHBZ#896685). - Disable virnettlscontexttest which apparently fails because of a broken gnutls3. Note since this patch touches Makefile.am, I have enabled autoreconf (enable_autotools). * Tue Feb 5 2013 Daniel P. Berrange - 1.0.2-2 - Fix missing python binding constants * Fri Feb 1 2013 Daniel P. Berrange - 1.0.2-1 - Update to 1.0.2 release * Tue Jan 29 2013 Cole Robinson - 1.0.1-6 - Fix network persistence after define (bz #890492) * Mon Jan 28 2013 Cole Robinson - 1.0.1-5 - CVE-2013-0170 libvirt: use-after-free in virNetMessageFree() (bz #893450, bz #905173) * Sun Jan 20 2013 Richard W.M. Jones - 1.0.1-4 - Rebuild for libnl soname breakage (RHBZ#901569). * Fri Jan 18 2013 Daniel P. Berrange - 1.0.1-3 - Rebuild for libnl3 soname change - Deal with broken kernel headers * Mon Dec 17 2012 Cole Robinson - 1.0.1-2 - Fix scriplet warning when uninstalling libvirt-client (bz #888071) * Mon Dec 17 2012 Daniel Veillard - 1.0.1-1 - Update to 1.0.1 release * Thu Nov 8 2012 Daniel P. Berrange - 1.0.0-1 - Update to 1.0.0 release * Tue Oct 30 2012 Cole Robinson - 0.10.2.1-2 - Disable libxl on F18 too * Sat Oct 27 2012 Cole Robinson - 0.10.2.1-1 - Rebased to version 0.10.2.1 - Fix lvm volume creation when alloc=0 (bz #866481) - Clarify virsh send-keys man page example (bz #860004) - Fix occasional deadlock via virDomainDestroy (bz #859009) - Fix LXC deadlock from ctrl-c (bz #848119) - Fix occasional selinux denials with macvtap (bz #798605) - Fix multilib conflict with systemtap files (bz #831425) - Don't trigger keytab warning in system logs (bz #745203) - Fix qemu domxml-2-native NIC model out (bz #636832) - Fix error message if not enough space for lvm vol (bz #609104) * Thu Oct 25 2012 Cole Robinson - 0.10.2-4 - Disable libxl driver, since it doesn't build with xen 4.2 in rawhide * Mon Sep 24 2012 Richard W.M. Jones - 0.10.2-3 - Re-add Use-qemu-system-i386-as-binary-instead-of-qemu.patch NB: This patch is Fedora-specific and not upstream. - Add upstream patches: don't duplicate environment variables (RHBZ#859596). * Mon Sep 24 2012 Daniel Veillard - 0.10.2-1 - Upstream release 0.10.2 - network: define new API virNetworkUpdate - add support for QEmu sandbox support - blockjob: add virDomainBlockCommit - New APIs to get/set Node memory parameters - new API virConnectListAllSecrets - new API virConnectListAllNWFilters - new API virConnectListAllNodeDevices - parallels: add support of containers to the driver - new API virConnectListAllInterfaces - new API virConnectListAllNetworks - new API virStoragePoolListAllVolumes - Add PMSUSPENDED life cycle event - new API virStorageListAllStoragePools - Add per-guest S3/S4 state configuration - qemu: Support for Block Device IO Limits - a lot of bug fixes, improvements and portability work * Fri Sep 21 2012 Richard W.M. Jones - 0.10.1-5 - Add (upstream) patches to label sockets for SELinux (RHBZ#853393). * Thu Sep 13 2012 Richard W.M. Jones - 0.10.1-4 - Fix for 32 bit qemu renamed to qemu-system-i386 (RHBZ#857026). * Wed Sep 12 2012 Cole Robinson - 0.10.1-3 - Fix libvirtd segfault with old netcf-libs (bz 853381) - Drop unneeded dnsmasq --filterwin2k - Fix unwanted connection closing, needed for boxes * Wed Sep 5 2012 Daniel P. Berrange - 0.10.1-2 - Remove dep on ceph RPM (rhbz #854360) * Fri Aug 31 2012 Daniel Veillard - 0.10.1-1 - upstream release of 0.10.1 - many fixes from 0.10.0 * Wed Aug 29 2012 Daniel Veillard - 0.10.0-1 - upstream release of 0.10.0 - agent: add qemuAgentArbitraryCommand() for general qemu agent command - Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions - network: use firewalld instead of iptables, when available - network: make network driver vlan-aware - esx: Implement network driver - driver for parallels hypervisor - Various LXC improvements - Add virDomainGetHostname - a lot of bug fixes, improvements and portability work * Thu Aug 23 2012 Daniel Veillard - 0.10.0-0rc1 - release candidate 1 of 0.10.0 * Tue Aug 14 2012 Daniel P. Berrange - 0.10.0-0rc0.2 - Enable autotools to make previous patch work * Tue Aug 14 2012 Daniel Veillard - 0.10.0-0rc0.1 - fix security driver missing from the daemon * Wed Aug 8 2012 Daniel Veillard - 0.10.0-0rc0 - snapshot before 0.10.0 in a few weeks - adds the parallel driver support * Mon Jul 23 2012 Richard W.M. Jones - 0.9.13-3 - Add upstream patch to fix RHBZ#842114. * Thu Jul 19 2012 Fedora Release Engineering - 0.9.13-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild * Mon Jul 2 2012 Daniel Veillard - 0.9.13-1 - S390: support for s390(x) - snapshot: implement new APIs for esx and vbox - snapshot: new query APIs and many improvements - virsh: Allow users to reedit rejected XML - nwfilter: add DHCP snooping - Enable driver modules in libvirt RPM - Default to enable driver modules for libvirtd - storage backend: Add RBD (RADOS Block Device) support - sVirt support for LXC domains inprovement - a lot of bug fixes, improvements and portability work * Mon May 14 2012 Daniel Veillard - 0.9.12-1 - qemu: allow snapshotting of sheepdog and rbd disks - blockjob: add new APIs - a lot of bug fixes, improvements and portability work * Thu Apr 26 2012 Cole Robinson - 0.9.11.3-1 - Rebased to version 0.9.11.3 - Abide URI username when connecting to hypervisor (bz 811397) - Fix managed USB mode (bz 814866) - Fix crash connecting to ESX host (bz 811891) * Wed Apr 4 2012 Daniel P. Berrange - 0.9.11-1 - Update to 0.9.11 release * Tue Apr 3 2012 Daniel P. Berrange - 0.9.10-4 - Revert previous change * Sat Mar 31 2012 Daniel P. Berrange - 0.9.10-3 - Refactor RPM spec to allow install without default configs * Thu Mar 15 2012 Daniel P. Berrange - 0.9.10-2 - Rebuild for libparted soname break * Mon Feb 13 2012 Daniel P. Berrange - 0.9.10-1 - Update to 0.9.10 * Thu Jan 12 2012 Daniel P. Berrange - 0.9.9-2 - Fix LXC I/O handling * Sat Jan 7 2012 Daniel Veillard - 0.9.9-1 - Add API virDomain{S,G}etInterfaceParameters - Add API virDomain{G, S}etNumaParameters - Add support for ppc64 qemu - Support Xen domctl v8 - many improvements and bug fixes * Thu Dec 8 2011 Daniel P. Berrange - 0.9.8-2 - Fix install of libvirt-guests.service & libvirtd.service * Thu Dec 8 2011 Daniel Veillard - 0.9.8-1 - Add support for QEMU 1.0 - Add preliminary PPC cpu driver - Add new API virDomain{Set, Get}BlockIoTune - block_resize: Define the new API - Add a public API to invoke suspend/resume on the host - various improvements for LXC containers - Define keepalive protocol and add virConnectIsAlive API - Add support for STP and VLAN filtering - many improvements and bug fixes * Mon Nov 14 2011 Justin M. Forbes - 0.9.7-3 - Remove versioned buildreq for yajl as 2.0.x features are not required. * Thu Nov 10 2011 Daniel P. Berrange - 0.9.7-2 - Rebuild for yajl 2.0.1 * Tue Nov 8 2011 Daniel P. Berrange - 0.9.7-1 - Update to 0.9.7 release * Tue Oct 11 2011 Dan Horák - 0.9.6-3 - xenlight available only on Xen arches (#745020) * Mon Oct 3 2011 Laine Stump - 0.9.6-2 - Make PCI multifunction support more manual - Bug 742836 - F15 build still uses cgconfig - Bug 738725 * Thu Sep 22 2011 Daniel Veillard - 0.9.6-1 - Fix the qemu reboot bug and a few others bug fixes * Tue Sep 20 2011 Daniel Veillard - 0.9.5-1 - many snapshot improvements (Eric Blake) - latency: Define new public API and structure (Osier Yang) - USB2 and various USB improvements (Marc-André Lureau) - storage: Add fs pool formatting (Osier Yang) - Add public API for getting migration speed (Jim Fehlig) - Add basic driver for Microsoft Hyper-V (Matthias Bolte) - many improvements and bug fixes * Wed Aug 3 2011 Daniel Veillard - 0.9.4-1 - network bandwidth QoS control - Add new API virDomainBlockPull* - save: new API to manipulate save file images - CPU bandwidth limits support - allow to send NMI and key event to guests - new API virDomainUndefineFlags - Implement code to attach to external QEMU instances - bios: Add support for SGA - various missing python binding - many improvements and bug fixes * Sat Jul 30 2011 Dan Hor?k - 0.9.3-3 - xenlight available only on Xen arches * Wed Jul 6 2011 Peter Robinson - 0.9.3-2 - Add ARM to NUMA platform excludes * Mon Jul 4 2011 Daniel Veillard - 0.9.3-1 - new API virDomainGetVcpupinInfo - Add TXT record support for virtual DNS service - Support reboots with the QEMU driver - New API virDomainGetControlInfo API - New API virNodeGetMemoryStats - New API virNodeGetCPUTime - New API for send-key - New API virDomainPinVcpuFlags - support multifunction PCI device - lxc: various improvements - many improvements and bug fixes * Wed Jun 29 2011 Richard W.M. Jones - 0.9.2-3 - Rebuild because of libparted soname bump (libparted.so.0 -> libparted.so.1). * Tue Jun 21 2011 Laine Stump - 0.9.2-2 - add rule to require netcf-0.1.8 during build so that new transactional network change APIs are included. - document that CVE-2011-2178 has been fixed (by virtue of rebase to 0.9.2 - see https://bugzilla.redhat.com/show_bug.cgi?id=709777) * Mon Jun 6 2011 Daniel Veillard - 0.9.2-1 - Framework for lock manager plugins - API for network config change transactions - flags for setting memory parameters - virDomainGetState public API - qemu: allow blkstat/blkinfo calls during migration - Introduce migration v3 API - Defining the Screenshot public API - public API for NMI injection - Various improvements and bug fixes * Wed May 25 2011 Richard W.M. Jones - 0.9.1-3 - Add upstream patches: 0001-json-Avoid-passing-large-positive-64-bit-integers-to.patch 0001-qemudDomainMemoryPeek-change-ownership-selinux-label.patch 0002-remote-remove-bogus-virDomainFree.patch so that users can try out virt-dmesg. - Change /var/cache mode to 0711. * Thu May 5 2011 Daniel Veillard - 0.9.1-1 - support various persistent domain updates - improvements on memory APIs - Add virDomainEventRebootNew - various improvements to libxl driver - Spice: support audio, images and stream compression - Various improvements and bug fixes * Thu Apr 7 2011 Daniel Veillard - 0.9.0-1 - Support cputune cpu usage tuning - Add public APIs for storage volume upload/download - Add public API for setting migration speed on the fly - Add libxenlight driver - qemu: support migration to fd - libvirt: add virDomain{Get,Set}BlkioParameters - setmem: introduce a new libvirt API (virDomainSetMemoryFlags) - Expose event loop implementation as a public API - Dump the debug buffer to libvirtd.log on fatal signal - Audit support - Various improvements and bug fixes * Mon Mar 14 2011 Daniel Veillard - 0.8.8-3 - fix a lack of API check on read-only connections - CVE-2011-1146 * Mon Feb 21 2011 Daniel P. Berrange - 0.8.8-2 - Fix kernel boot with latest QEMU * Thu Feb 17 2011 Daniel Veillard - 0.8.8-1 - expose new API for sysinfo extraction - cgroup blkio weight support - smartcard device support - qemu: Support per-device boot ordering - Various improvements and bug fixes * Tue Feb 08 2011 Fedora Release Engineering - 0.8.7-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild * Thu Jan 6 2011 Daniel Veillard - 0.8.7-1 - Preliminary support for VirtualBox 4.0 - IPv6 support - Add VMware Workstation and Player driver driver - Add network disk support - Various improvements and bug fixes - from 0.8.6: - Add support for iSCSI target auto-discovery - QED: Basic support for QED images - remote console support - support for SPICE graphics - sysinfo and VMBIOS support - virsh qemu-monitor-command - various improvements and bug fixes * Fri Oct 29 2010 Daniel Veillard - 0.8.5-1 - Enable JSON and netdev features in QEMU >= 0.13 - framework for auditing integration - framework DTrace/SystemTap integration - Setting the number of vcpu at boot - Enable support for nested SVM - Virtio plan9fs filesystem QEMU - Memory parameter controls - various improvements and bug fixes * Wed Sep 29 2010 jkeating - 0.8.4-3 - Rebuilt for gcc bug 634757 * Thu Sep 16 2010 Dan Horák - 0.8.4-2 - disable the nwfilterxml2xmltest also on s390(x) * Mon Sep 13 2010 Daniel Veillard - 0.8.4-1 - Upstream release 0.8.4 * Mon Aug 23 2010 Daniel P. Berrange - 0.8.3-2 - Fix potential overflow in boot menu code * Mon Aug 23 2010 Daniel P. Berrange - 0.8.3-1 - Upstream release 0.8.3 * Wed Jul 21 2010 David Malcolm - 0.8.2-3 - Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild * Mon Jul 12 2010 Daniel P. Berrange - 0.8.2-2 - CVE-2010-2237 ignoring defined main disk format when looking up disk backing stores - CVE-2010-2238 ignoring defined disk backing store format when recursing into disk image backing stores - CVE-2010-2239 not setting user defined backing store format when creating new image - CVE-2010-2242 libvirt: improperly mapped source privileged ports may allow for obtaining privileged resources on the host * Mon Jul 5 2010 Daniel Veillard - 0.8.2-1 - Upstream release 0.8.2 - phyp: adding support for IVM - libvirt: introduce domainCreateWithFlags API - add 802.1Qbh and 802.1Qbg switches handling - Support for VirtualBox version 3.2 - Init script for handling guests on shutdown/boot - qemu: live migration with non-shared storage for kvm * Fri Apr 30 2010 Daniel Veillard - 0.8.1-1 - Upstream release 0.8.1 - Starts dnsmasq from libvirtd with --dhcp-hostsfile - Add virDomainGetBlockInfo API to query disk sizing - a lot of bug fixes and cleanups * Mon Apr 12 2010 Daniel Veillard - 0.8.0-1 - Upstream release 0.8.0 - Snapshotting support (QEmu/VBox/ESX) - Network filtering API - XenAPI driver - new APIs for domain events - Libvirt managed save API - timer subselection for domain clock - synchronous hooks - API to update guest CPU to host CPU - virDomainUpdateDeviceFlags new API - migrate max downtime API - volume wiping API - and many bug fixes * Tue Mar 30 2010 Richard W.M. Jones - 0.7.7-3.fc14 - No change, just rebuild against new libparted with bumped soname. * Mon Mar 22 2010 Cole Robinson - 0.7.7-2.fc14 - Fix USB devices by product with security enabled (bz 574136) - Set kernel/initrd in security driver, fixes some URL installs (bz 566425) * Fri Mar 5 2010 Daniel Veillard - 0.7.7-1 - macvtap support - async job handling - virtio channel - computing baseline CPU - virDomain{Attach,Detach}DeviceFlags - assorted bug fixes and lots of cleanups * Tue Feb 16 2010 Adam Jackson 0.7.6-2 - libvirt-0.7.6-add-needed.patch: Fix FTBFS from --no-add-needed - Add BuildRequires: xmlrpc-c-client for libxmlrpc_client.so * Wed Feb 3 2010 Daniel Veillard - 0.7.6-1 - upstream release of 0.7.6 - Use QEmu new device adressing when possible - Implement CPU topology support for QEMU driver - Implement SCSI controller hotplug/unplug for QEMU - Implement support for multi IQN - a lot of fixes and improvements * Thu Jan 14 2010 Chris Weyl 0.7.5-3 - bump for libssh2 rebuild * Tue Jan 12 2010 Daniel P. Berrange - 0.7.5-2 - Rebuild for libparted soname change * Wed Dec 23 2009 Daniel Veillard - 0.7.5-1 - Add new API virDomainMemoryStats - Public API and domain extension for CPU flags - vbox: Add support for version 3.1 - Support QEMU's virtual FAT block device driver - a lot of fixes * Fri Nov 20 2009 Daniel Veillard - 0.7.4-1 - upstream release of 0.7.4 - udev node device backend - API to check object properties - better QEmu monitor processing - MAC address based port filtering for qemu - support IPv6 and multiple addresses per interfaces - a lot of fixes * Thu Nov 19 2009 Daniel P. Berrange - 0.7.2-6 - Really fix restore file labelling this time * Wed Nov 11 2009 Daniel P. Berrange - 0.7.2-5 - Disable numactl on s390[x]. Again. * Wed Nov 11 2009 Daniel P. Berrange - 0.7.2-4 - Fix QEMU save/restore permissions / labelling * Thu Oct 29 2009 Mark McLoughlin - 0.7.2-3 - Avoid compressing small log files (#531030) * Thu Oct 29 2009 Mark McLoughlin - 0.7.2-2 - Make libvirt-devel require libvirt-client, not libvirt - Fix qemu machine types handling * Wed Oct 14 2009 Daniel Veillard - 0.7.2-1 - Upstream release of 0.7.2 - Allow to define ESX domains - Allows suspend and resulme of LXC domains - API for data streams - many bug fixes * Tue Oct 13 2009 Mark McLoughlin - 0.7.1-12 - Fix restore of qemu guest using raw save format (#523158) * Fri Oct 9 2009 Mark McLoughlin - 0.7.1-11 - Fix libvirtd memory leak during error reply sending (#528162) - Add several PCI hot-unplug typo fixes from upstream * Tue Oct 6 2009 Mark McLoughlin - 0.7.1-10 - Create /var/log/libvirt/{lxc,uml} dirs for logrotate - Make libvirt-python dependon on libvirt-client - Sync misc minor changes from upstream spec * Tue Oct 6 2009 Mark McLoughlin - 0.7.1-9 - Change logrotate config to weekly (#526769) * Thu Oct 1 2009 Mark McLoughlin - 0.7.1-8 - Disable sound backend, even when selinux is disabled (#524499) - Re-label qcow2 backing files (#497131) * Wed Sep 30 2009 Mark McLoughlin - 0.7.1-7 - Fix USB device passthrough (#522683) * Mon Sep 21 2009 Chris Weyl - 0.7.1-6 - rebuild for libssh2 1.2 * Mon Sep 21 2009 Mark McLoughlin - 0.7.1-5 - Don't set a bogus error in virDrvSupportsFeature() - Fix raw save format * Thu Sep 17 2009 Mark McLoughlin - 0.7.1-4 - A couple of hot-unplug memory handling fixes (#523953) * Thu Sep 17 2009 Daniel Veillard - 0.7.1-3 - disable numactl on s390[x] * Thu Sep 17 2009 Daniel Veillard - 0.7.1-2 - revamp of spec file for modularity and RHELs * Tue Sep 15 2009 Daniel Veillard - 0.7.1-1 - Upstream release of 0.7.1 - ESX, VBox driver updates - mutipath support - support for encrypted (qcow) volume - compressed save image format for Qemu/KVM - QEmu host PCI device hotplug support - configuration of huge pages in guests - a lot of fixes * Mon Sep 14 2009 Mark McLoughlin - 0.7.1-0.2.gitfac3f4c - Update to newer snapshot of 0.7.1 - Stop libvirt using untrusted 'info vcpus' PID data (#520864) - Support relabelling of USB and PCI devices - Enable multipath storage support - Restart libvirtd upon RPM upgrade * Sun Sep 6 2009 Mark McLoughlin - 0.7.1-0.1.gitg3ef2e05 - Update to pre-release git snapshot of 0.7.1 - Drop upstreamed patches * Wed Aug 19 2009 Mark McLoughlin - 0.7.0-6 - Fix migration completion with newer versions of qemu (#516187) * Wed Aug 19 2009 Mark McLoughlin - 0.7.0-5 - Add PCI host device hotplug support - Allow PCI bus reset to reset other devices (#499678) - Fix stupid PCI reset error message (bug #499678) - Allow PM reset on multi-function PCI devices (bug #515689) - Re-attach PCI host devices after guest shuts down (bug #499561) - Fix list corruption after disk hot-unplug - Fix minor 'virsh nodedev-list --tree' annoyance * Thu Aug 13 2009 Daniel P. Berrange - 0.7.0-4 - Rewrite policykit support (rhbz #499970) - Log and ignore NUMA topology problems (rhbz #506590) * Mon Aug 10 2009 Mark McLoughlin - 0.7.0-3 - Don't fail to start network if ipv6 modules is not loaded (#516497) * Thu Aug 6 2009 Mark McLoughlin - 0.7.0-2 - Make sure qemu can access kernel/initrd (bug #516034) - Set perms on /var/lib/libvirt/boot to 0711 (bug #516034) * Wed Aug 5 2009 Daniel Veillard - 0.7.0-1 - ESX, VBox3, Power Hypervisor drivers - new net filesystem glusterfs - Storage cloning for LVM and Disk backends - interface implementation based on netcf - Support cgroups in QEMU driver - QEmu hotplug NIC support - a lot of fixes * Fri Jul 3 2009 Daniel Veillard - 0.6.5-1 - release of 0.6.5 * Fri May 29 2009 Daniel Veillard - 0.6.4-1 - release of 0.6.4 - various new APIs * Fri Apr 24 2009 Daniel Veillard - 0.6.3-1 - release of 0.6.3 - VirtualBox driver * Fri Apr 3 2009 Daniel Veillard - 0.6.2-1 - release of 0.6.2 * Wed Mar 4 2009 Daniel Veillard - 0.6.1-1 - release of 0.6.1 * Sat Jan 31 2009 Daniel Veillard - 0.6.0-1 - release of 0.6.0 * Tue Nov 25 2008 Daniel Veillard - 0.5.0-1 - release of 0.5.0 * Tue Sep 23 2008 Daniel Veillard - 0.4.6-1 - release of 0.4.6 * Mon Sep 8 2008 Daniel Veillard - 0.4.5-1 - release of 0.4.5 * Wed Jun 25 2008 Daniel Veillard - 0.4.4-1 - release of 0.4.4 - mostly a few bug fixes from 0.4.3 * Thu Jun 12 2008 Daniel Veillard - 0.4.3-1 - release of 0.4.3 - lots of bug fixes and small improvements * Tue Apr 8 2008 Daniel Veillard - 0.4.2-1 - release of 0.4.2 - lots of bug fixes and small improvements * Mon Mar 3 2008 Daniel Veillard - 0.4.1-1 - Release of 0.4.1 - Storage APIs - xenner support - lots of assorted improvements, bugfixes and cleanups - documentation and localization improvements * Tue Dec 18 2007 Daniel Veillard - 0.4.0-1 - Release of 0.4.0 - SASL based authentication - PolicyKit authentication - improved NUMA and statistics support - lots of assorted improvements, bugfixes and cleanups - documentation and localization improvements * Sun Sep 30 2007 Daniel Veillard - 0.3.3-1 - Release of 0.3.3 - Avahi support - NUMA support - lots of assorted improvements, bugfixes and cleanups - documentation and localization improvements * Tue Aug 21 2007 Daniel Veillard - 0.3.2-1 - Release of 0.3.2 - API for domains migration - APIs for collecting statistics on disks and interfaces - lots of assorted bugfixes and cleanups - documentation and localization improvements * Tue Jul 24 2007 Daniel Veillard - 0.3.1-1 - Release of 0.3.1 - localtime clock support - PS/2 and USB input devices - lots of assorted bugfixes and cleanups - documentation and localization improvements * Mon Jul 9 2007 Daniel Veillard - 0.3.0-1 - Release of 0.3.0 - Secure remote access support - unification of daemons - lots of assorted bugfixes and cleanups - documentation and localization improvements * Fri Jun 8 2007 Daniel Veillard - 0.2.3-1 - Release of 0.2.3 - lot of assorted bugfixes and cleanups - support for Xen-3.1 - new scheduler API * Tue Apr 17 2007 Daniel Veillard - 0.2.2-1 - Release of 0.2.2 - lot of assorted bugfixes and cleanups - preparing for Xen-3.0.5 * Thu Mar 22 2007 Jeremy Katz - 0.2.1-2.fc7 - don't require xen; we don't need the daemon and can control non-xen now - fix scriptlet error (need to own more directories) - update description text * Fri Mar 16 2007 Daniel Veillard - 0.2.1-1 - Release of 0.2.1 - lot of bug and portability fixes - Add support for network autostart and init scripts - New API to detect the virtualization capabilities of a host - Documentation updates * Fri Feb 23 2007 Daniel P. Berrange - 0.2.0-4.fc7 - Fix loading of guest & network configs * Fri Feb 16 2007 Daniel P. Berrange - 0.2.0-3.fc7 - Disable kqemu support since its not in Fedora qemu binary - Fix for -vnc arg syntax change in 0.9.0 QEMU * Thu Feb 15 2007 Daniel P. Berrange - 0.2.0-2.fc7 - Fixed path to qemu daemon for autostart - Fixed generation of block in XML - Pre-create config directory at startup * Wed Feb 14 2007 Daniel Veillard 0.2.0-1.fc7 - support for KVM and QEmu - support for network configuration - assorted fixes * Mon Jan 22 2007 Daniel Veillard 0.1.11-1.fc7 - finish inactive Xen domains support - memory leak fix - RelaxNG schemas for XML configs * Wed Dec 20 2006 Daniel Veillard 0.1.10-1.fc7 - support for inactive Xen domains - improved support for Xen display and vnc - a few bug fixes - localization updates * Thu Dec 7 2006 Jeremy Katz - 0.1.9-2 - rebuild against python 2.5 * Wed Nov 29 2006 Daniel Veillard 0.1.9-1 - better error reporting - python bindings fixes and extensions - add support for shareable drives - add support for non-bridge style networking - hot plug device support - added support for inactive domains - API to dump core of domains - various bug fixes, cleanups and improvements - updated the localization * Tue Nov 7 2006 Daniel Veillard 0.1.8-3 - it's pkgconfig not pgkconfig ! * Mon Nov 6 2006 Daniel Veillard 0.1.8-2 - fixing spec file, added %dist, -devel requires pkgconfig and xen-devel - Resolves: rhbz#202320 * Mon Oct 16 2006 Daniel Veillard 0.1.8-1 - fix missing page size detection code for ia64 - fix mlock size when getting domain info list from hypervisor - vcpu number initialization - don't label crashed domains as shut off - fix virsh man page - blktapdd support for alternate drivers like blktap - memory leak fixes (xend interface and XML parsing) - compile fix - mlock/munlock size fixes * Fri Sep 22 2006 Daniel Veillard 0.1.7-1 - Fix bug when running against xen-3.0.3 hypercalls - Fix memory bug when getting vcpus info from xend * Fri Sep 22 2006 Daniel Veillard 0.1.6-1 - Support for localization - Support for new Xen-3.0.3 cdrom and disk configuration - Support for setting VNC port - Fix bug when running against xen-3.0.2 hypercalls - Fix reconnection problem when talking directly to http xend * Tue Sep 5 2006 Jeremy Katz - 0.1.5-3 - patch from danpb to support new-format cd devices for HVM guests * Tue Sep 5 2006 Daniel Veillard 0.1.5-2 - reactivating ia64 support * Tue Sep 5 2006 Daniel Veillard 0.1.5-1 - new release - bug fixes - support for new hypervisor calls - early code for config files and defined domains * Mon Sep 4 2006 Daniel Berrange - 0.1.4-5 - add patch to address dom0_ops API breakage in Xen 3.0.3 tree * Mon Aug 28 2006 Jeremy Katz - 0.1.4-4 - add patch to support paravirt framebuffer in Xen * Mon Aug 21 2006 Daniel Veillard 0.1.4-3 - another patch to fix network handling in non-HVM guests * Thu Aug 17 2006 Daniel Veillard 0.1.4-2 - patch to fix virParseUUID() * Wed Aug 16 2006 Daniel Veillard 0.1.4-1 - vCPUs and affinity support - more complete XML, console and boot options - specific features support - enforced read-only connections - various improvements, bug fixes * Wed Aug 2 2006 Jeremy Katz - 0.1.3-6 - add patch from pvetere to allow getting uuid from libvirt * Wed Aug 2 2006 Jeremy Katz - 0.1.3-5 - build on ia64 now * Thu Jul 27 2006 Jeremy Katz - 0.1.3-4 - don't BR xen, we just need xen-devel * Thu Jul 27 2006 Daniel Veillard 0.1.3-3 - need rebuild since libxenstore is now versionned * Mon Jul 24 2006 Mark McLoughlin - 0.1.3-2 - Add BuildRequires: xen-devel * Wed Jul 12 2006 Jesse Keating - 0.1.3-1.1 - rebuild * Tue Jul 11 2006 Daniel Veillard 0.1.3-1 - support for HVM Xen guests - various bugfixes * Mon Jul 3 2006 Daniel Veillard 0.1.2-1 - added a proxy mechanism for read only access using httpu - fixed header includes paths * Wed Jun 21 2006 Daniel Veillard 0.1.1-1 - extend and cleanup the driver infrastructure and code - python examples - extend uuid support - bug fixes, buffer handling cleanups - support for new Xen hypervisor API - test driver for unit testing - virsh --conect argument * Mon Apr 10 2006 Daniel Veillard 0.1.0-1 - various fixes - new APIs: for Node information and Reboot - virsh improvements and extensions - documentation updates and man page - enhancement and fixes of the XML description format * Tue Feb 28 2006 Daniel Veillard 0.0.6-1 - added error handling APIs - small bug fixes - improve python bindings - augment documentation and regression tests * Thu Feb 23 2006 Daniel Veillard 0.0.5-1 - new domain creation API - new UUID based APIs - more tests, documentation, devhelp - bug fixes * Fri Feb 10 2006 Daniel Veillard 0.0.4-1 - fixes some problems in 0.0.3 due to the change of names * Wed Feb 8 2006 Daniel Veillard 0.0.3-1 - changed library name to libvirt from libvir, complete and test the python bindings * Sun Jan 29 2006 Daniel Veillard 0.0.2-1 - upstream release of 0.0.2, use xend, save and restore added, python bindings fixed * Wed Nov 2 2005 Daniel Veillard 0.0.1-1 - created