Go to file
Kairui Song 70978c00e5 bash scripts: replace '[ ]' with '[[ ]]' for bash scripts
kdumpctl, mkdumprd, *-module-setup.sh only target bash, since they
only run in first kernel and depend on dracut, and dracut depends
on bash. So use '[[ ]]' to replace '[ ]'.

This is a batch update done with following command:
`sed -i -e 's/\(\s\)\[\s\([^]]*\)\s\]/\1\[\[\ \2 \]\]/g' kdumpctl, mkdumprd, *-module-setup.sh`
and replaced [ ... -a ... ] with [[ ... ]] && [[ ... ]] manually.

See https://tldp.org/LDP/abs/html/testconstructs.html for more details
on '[[ ]]', it's more versatile, safer, and slightly faster than '[ ]'.

This will also help shfmt to clean up the code in later commits.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
2021-09-14 03:25:29 +08:00
tests selftest: ignore all spaces when compare the dmesg files 2021-06-08 22:21:47 +08:00
.editorconfig Add a .editorconfig file 2021-09-14 03:25:25 +08:00
.gitignore
60-kdump.install Write to /var/lib/kdump if $KDUMP_BOOTDIR not writable 2021-04-19 16:11:17 +08:00
92-crashkernel.install Don't exit 1 from 92-crashkernel.install if zipl is absent (#1993505) 2021-08-31 16:07:51 -07:00
98-kexec.rules
98-kexec.rules.ppc64 Stop reloading kdump service on CPU hotplug event for FADump 2021-03-10 16:24:42 +08:00
crashkernel-howto.txt Update crashkernel-howto.txt 2021-07-21 14:05:42 +08:00
dracut-early-kdump-module-setup.sh bash scripts: replace '[ ]' with '[[ ]]' for bash scripts 2021-09-14 03:25:29 +08:00
dracut-early-kdump.sh logger: source the logger file individually 2021-01-20 14:13:44 +08:00
dracut-fadump-init-fadump.sh fadump-init: clean up mount points properly 2021-06-30 17:28:45 +08:00
dracut-fadump-module-setup.sh fadump: isolate fadump initramfs image within the default one 2021-06-29 21:35:58 +08:00
dracut-kdump-capture.service
dracut-kdump-emergency.service Remove the kdump error handler isolation wrapper 2021-06-04 14:26:45 +08:00
dracut-kdump-emergency.target
dracut-kdump-error-handler.sh
dracut-kdump.sh kdump-lib.sh: add a config format and read helper 2021-09-14 03:25:29 +08:00
dracut-module-setup.sh bash scripts: replace '[ ]' with '[[ ]]' for bash scripts 2021-09-14 03:25:29 +08:00
dracut-monitor_dd_progress
early-kdump-howto.txt Improves the early-kdump-howto.txt document in several points: 2020-03-12 23:31:34 +08:00
fadump-howto.txt Clear old crashkernl=auto in comment and doc 2021-08-05 17:54:20 +08:00
kdump-dep-generator.sh logger: source the logger file individually 2021-01-20 14:13:44 +08:00
kdump-in-cluster-environment.txt
kdump-lib-initramfs.sh kdump-lib.sh: add a config format and read helper 2021-09-14 03:25:29 +08:00
kdump-lib.sh kdump-lib.sh: use kdump_get_conf_val to read config values 2021-09-14 03:25:29 +08:00
kdump-logger.sh Capitalize the configuration name of log level 2020-11-13 02:49:35 +08:00
kdump-migrate-action.sh kdump/ppc64: rebuild initramfs image after migration 2021-07-21 10:53:59 +08:00
kdump-restart.sh kdump/ppc64: rebuild initramfs image after migration 2021-07-21 10:53:59 +08:00
kdump-udev-throttler
kdump.conf kdump.conf: add ipv6 example for nfs and ssh dump 2021-01-21 15:36:27 +08:00
kdump.conf.5 kdump.conf: Update doc about core_collector for ssh target 2021-01-12 16:12:32 +08:00
kdump.service kdump.service: use ConditionKernelCommandLine=crashkernel 2020-10-27 12:22:36 -04:00
kdump.sysconfig Disable CMA in kdump 2nd kernel 2021-05-13 17:13:39 +08:00
kdump.sysconfig.aarch64 Disable CMA in kdump 2nd kernel 2021-05-13 17:13:39 +08:00
kdump.sysconfig.i386 Disable CMA in kdump 2nd kernel 2021-05-13 17:13:39 +08:00
kdump.sysconfig.ppc64 Disable CMA in kdump 2nd kernel 2021-05-13 17:13:39 +08:00
kdump.sysconfig.ppc64le Disable CMA in kdump 2nd kernel 2021-05-13 17:13:39 +08:00
kdump.sysconfig.s390x kdump.sysconfig.s390: Remove "prot_virt" from kdump kernel cmdline 2021-07-20 15:57:05 +08:00
kdump.sysconfig.x86_64 Revert "Revert "x86_64: enable the kexec file load by default"" 2021-07-14 02:03:10 +08:00
kdumpctl bash scripts: replace '[ ]' with '[[ ]]' for bash scripts 2021-09-14 03:25:29 +08:00
kdumpctl.8 kdumpctl: Add kdumpctl reset-crashkernel 2021-07-08 15:18:45 +08:00
kexec-kdump-howto.txt Doc: Improve the kdump sysconfig document 2021-01-12 16:46:44 +08:00
kexec-tools-2.0.22-makedumpfile-check-for-invalid-physical-address-proc-kcore-when-finding-max_paddr.patch check for invalid physical address of /proc/kcore when finding max_paddr 2021-06-28 15:52:16 +08:00
kexec-tools-2.0.22-makedumpfile-check-for-invalid-physical-address-proc-kcore-when-making-ELF-dumpfile.patch check for invalid physical address of /proc/kcore when making ELF dumpfile 2021-06-28 15:52:21 +08:00
kexec-tools-2.0.22-makedumpfile-Increase-SECTION_MAP_LAST_BIT-to-5.patch Increase SECTION_MAP_LAST_BIT to 5 2021-06-28 15:52:02 +08:00
kexec-tools.spec Don't exit 1 from 92-crashkernel.install if zipl is absent (#1993505) 2021-08-31 16:07:51 -07:00
live-image-kdump-howto.txt
mkdumprd bash scripts: replace '[ ]' with '[[ ]]' for bash scripts 2021-09-14 03:25:29 +08:00
mkdumprd.8 Doc: improve mkdumprd man page 2020-12-11 14:05:08 +08:00
mkfadumprd bash scripts: replace '[ ]' with '[[ ]]' for bash scripts 2021-09-14 03:25:29 +08:00
README
sources Update makedumpfile to 1.6.9 2021-05-13 16:45:36 +08:00
zanata-notes.txt

Adding a patch to kexec-tools
=============================
There is a mailing list kexec@lists.fedoraproject.org where all the dicussion
related to fedora kexec-tools happen. All the patches are posted there for
inclusion and committed to kexec-tools after review.

So if you want your patches to be included in fedora kexec-tools package,
post these to kexec@lists.fedoraproject.org.

One can subscribe to list and browse through archives here.

https://admin.fedoraproject.org/mailman/listinfo/kexec