63476302aa
Once login using ssh, the ssh will store the known hosts entry to the local ~/.ssh/known_hosts. From now, we can login using ssh automaticly. The ssh will check the ~/ssh/.known_hosts entry, if set the option StrictHostKeyChecking=yes/ask in the config or command line, when you want to login the target. the default value of StrictHostKeyChecking is ask. And the kdump using the ssh will append the option StrictHostKeyChecking=yes in the command line. We can using following ip to connect peer machine, if enable the ipv6. fe80::5054:ff:fe48:ca80%eth0 Obviously, above ip contains the ethX. Kdump will add the prefix "kdump-" before ethX to avoid flowing netdevice name in case netdevice names ethX in the 2nd kernel. So the ip address will change to fe80::5054:ff:fe48:ca80%kdump-eth0. Kdump will login the target manully in the 2nd kernel, because of the option StrictHostKeyChecking=yes and inexistence known hosts entry in the local ~/.ssh/known_hosts. Hence dumping core will fail. In order to login automaticly using ssh, we should add the prefix "kdump-" before ethX in the local ~/.ssh/known_hosts. Signed-off-by: Minfei Huang <mhuang@redhat.com>
617 lines
19 KiB
Bash
Executable File
617 lines
19 KiB
Bash
Executable File
#!/bin/bash
|
|
|
|
. $dracutfunctions
|
|
. /lib/kdump/kdump-lib.sh
|
|
|
|
check() {
|
|
[[ $debug ]] && set -x
|
|
#kdumpctl sets this explicitly
|
|
if [ -z "$IN_KDUMP" ] || [ ! -f /etc/kdump.conf ]
|
|
then
|
|
return 1
|
|
fi
|
|
return 0
|
|
}
|
|
|
|
depends() {
|
|
local _dep="base shutdown"
|
|
|
|
if [ -d /sys/module/drm/drivers ]; then
|
|
_dep="$_dep drm"
|
|
fi
|
|
|
|
if [ is_generic_fence_kdump -o is_pcs_fence_kdump ]; then
|
|
_dep="$_dep network"
|
|
fi
|
|
|
|
echo $_dep
|
|
return 0
|
|
}
|
|
|
|
kdump_to_udev_name() {
|
|
local dev="${1//\"/}"
|
|
|
|
case "$dev" in
|
|
UUID=*)
|
|
dev=`blkid -U "${dev#UUID=}"`
|
|
;;
|
|
LABEL=*)
|
|
dev=`blkid -L "${dev#LABEL=}"`
|
|
;;
|
|
esac
|
|
echo $(get_persistent_dev "$dev")
|
|
}
|
|
|
|
kdump_is_bridge() {
|
|
[ -d /sys/class/net/"$1"/bridge ]
|
|
}
|
|
|
|
kdump_is_bond() {
|
|
[ -d /sys/class/net/"$1"/bonding ]
|
|
}
|
|
|
|
kdump_is_team() {
|
|
[ -f /usr/bin/teamnl ] && teamnl $1 ports &> /dev/null
|
|
}
|
|
|
|
kdump_is_vlan() {
|
|
[ -f /proc/net/vlan/"$1" ]
|
|
}
|
|
|
|
# $1: netdev name
|
|
kdump_setup_dns() {
|
|
_dnsfile=${initdir}/etc/cmdline.d/42dns.conf
|
|
. /etc/sysconfig/network-scripts/ifcfg-$1
|
|
[ -n "$DNS1" ] && echo "nameserver=$DNS1" > "$_dnsfile"
|
|
[ -n "$DNS2" ] && echo "nameserver=$DNS2" >> "$_dnsfile"
|
|
}
|
|
|
|
#$1: netdev name
|
|
#$2: srcaddr
|
|
#if it use static ip echo it, or echo null
|
|
kdump_static_ip() {
|
|
local _netmask _gateway
|
|
local _netdev="$1" _srcaddr="$2"
|
|
local _ipaddr=$(ip addr show dev $_netdev permanent | \
|
|
awk "/ $_srcaddr\/.* $_netdev\$/{print \$2}")
|
|
if [ -n "$_ipaddr" ]; then
|
|
_netmask=$(ipcalc -m $_ipaddr | cut -d'=' -f2)
|
|
_gateway=$(ip route list dev $_netdev | awk '/^default /{print $3}')
|
|
echo -n "${_srcaddr}::${_gateway}:${_netmask}::"
|
|
fi
|
|
}
|
|
|
|
kdump_get_mac_addr() {
|
|
cat /sys/class/net/$1/address
|
|
}
|
|
|
|
#Bonding or team master modifies the mac address
|
|
#of its slaves, we should use perm address
|
|
kdump_get_perm_addr() {
|
|
local addr=$(ethtool -P $1 | sed -e 's/Permanent address: //')
|
|
if [ -z "$addr" ] || [ "$addr" = "00:00:00:00:00:00" ]
|
|
then
|
|
derror "Can't get the permanent address of $1"
|
|
else
|
|
echo "$addr"
|
|
fi
|
|
}
|
|
|
|
kdump_setup_bridge() {
|
|
local _netdev=$1
|
|
local _brif _dev _mac _kdumpdev
|
|
for _dev in `ls /sys/class/net/$_netdev/brif/`; do
|
|
_kdumpdev=$_dev
|
|
if kdump_is_bond "$_dev"; then
|
|
kdump_setup_bond "$_dev"
|
|
elif kdump_is_team "$_dev"; then
|
|
kdump_setup_team "$_dev"
|
|
elif kdump_is_vlan "$_dev"; then
|
|
kdump_setup_vlan "$_dev"
|
|
else
|
|
_mac=$(kdump_get_mac_addr $_dev)
|
|
_kdumpdev=$(kdump_setup_ifname $_dev)
|
|
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/41bridge.conf
|
|
fi
|
|
_brif+="$_kdumpdev,"
|
|
done
|
|
echo " bridge=$_netdev:$(echo $_brif | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/41bridge.conf
|
|
}
|
|
|
|
kdump_setup_bond() {
|
|
local _netdev=$1
|
|
local _dev _mac _slaves _kdumpdev
|
|
for _dev in `cat /sys/class/net/$_netdev/bonding/slaves`; do
|
|
_mac=$(kdump_get_perm_addr $_dev)
|
|
_kdumpdev=$(kdump_setup_ifname $_dev)
|
|
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/42bond.conf
|
|
_slaves+="$_kdumpdev,"
|
|
done
|
|
echo -n " bond=$_netdev:$(echo $_slaves | sed 's/,$//')" >> ${initdir}/etc/cmdline.d/42bond.conf
|
|
# Get bond options specified in ifcfg
|
|
. /etc/sysconfig/network-scripts/ifcfg-$_netdev
|
|
bondoptions="$(echo :$BONDING_OPTS | sed 's/\s\+/,/')"
|
|
echo "$bondoptions" >> ${initdir}/etc/cmdline.d/42bond.conf
|
|
}
|
|
|
|
kdump_setup_team() {
|
|
local _netdev=$1
|
|
local _dev _mac _slaves _kdumpdev
|
|
for _dev in `teamnl $_netdev ports | awk -F':' '{print $2}'`; do
|
|
_mac=$(kdump_get_perm_addr $_dev)
|
|
_kdumpdev=$(kdump_setup_ifname $_dev)
|
|
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/44team.conf
|
|
_slaves+="$_kdumpdev,"
|
|
done
|
|
echo " team=$_netdev:$(echo $_slaves | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/44team.conf
|
|
#Buggy version teamdctl outputs to stderr!
|
|
#Try to use the latest version of teamd.
|
|
teamdctl "$_netdev" config dump > /tmp/$$-$_netdev.conf
|
|
if [ $? -ne 0 ]
|
|
then
|
|
derror "teamdctl failed."
|
|
exit 1
|
|
fi
|
|
inst_dir /etc/teamd
|
|
inst_simple /tmp/$$-$_netdev.conf "/etc/teamd/$_netdev.conf"
|
|
rm -f /tmp/$$-$_netdev.conf
|
|
}
|
|
|
|
kdump_setup_vlan() {
|
|
local _netdev=$1
|
|
local _phydev="$(awk '/^Device:/{print $2}' /proc/net/vlan/"$_netdev")"
|
|
local _netmac="$(kdump_get_mac_addr $_phydev)"
|
|
local _kdumpdev
|
|
|
|
#Just support vlan over bond, it is not easy
|
|
#to support all other complex setup
|
|
if kdump_is_bridge "$_phydev"; then
|
|
derror "Vlan over bridge is not supported!"
|
|
exit 1
|
|
elif kdump_is_team "$_phydev"; then
|
|
derror "Vlan over team is not supported!"
|
|
exit 1
|
|
elif kdump_is_bond "$_phydev"; then
|
|
kdump_setup_bond "$_phydev"
|
|
echo " vlan=$_netdev:$_phydev" > ${initdir}/etc/cmdline.d/43vlan.conf
|
|
else
|
|
_kdumpdev="$(kdump_setup_ifname $_phydev)"
|
|
echo " vlan=$_netdev:$_kdumpdev ifname=$_kdumpdev:$_netmac" > ${initdir}/etc/cmdline.d/43vlan.conf
|
|
fi
|
|
}
|
|
|
|
# setup s390 znet cmdline
|
|
# $1: netdev name
|
|
kdump_setup_znet() {
|
|
local _options=""
|
|
. /etc/sysconfig/network-scripts/ifcfg-$1
|
|
for i in $OPTIONS; do
|
|
_options=${_options},$i
|
|
done
|
|
echo rd.znet=${NETTYPE},${SUBCHANNELS}${_options} > ${initdir}/etc/cmdline.d/30znet.conf
|
|
}
|
|
|
|
get_routes() {
|
|
local _netdev="$1" _target="$2"
|
|
local _route _nexthop
|
|
|
|
_route=`/sbin/ip route get to $_target 2>&1`
|
|
#
|
|
# in the same subnet region, following is the route format
|
|
# _route='192.168.200.137 dev eth1 src 192.168.200.129
|
|
# cache '
|
|
#
|
|
# in the different subnet region, following is the route format
|
|
# _route='192.168.201.215 via 192.168.200.137 dev eth1 src 192.168.200.129
|
|
# cache '
|
|
#
|
|
if `echo $_route | grep -q "via"`; then
|
|
# route going to a different subnet via a router
|
|
_nexthop=`echo $_route | awk '{print $3}'`
|
|
fi
|
|
_netdev=$(kdump_setup_ifname $_netdev)
|
|
|
|
echo "rd.route=$_target:$_nexthop:$_netdev" >> ${initdir}/etc/cmdline.d/45route-static.conf
|
|
}
|
|
|
|
# Setup dracut to bringup a given network interface
|
|
kdump_setup_netdev() {
|
|
local _netdev=$1 _srcaddr=$2 _target=$3
|
|
local _static _proto _ip_conf _ip_opts _ifname_opts
|
|
|
|
if [ "$(uname -m)" = "s390x" ]; then
|
|
kdump_setup_znet $_netdev
|
|
fi
|
|
|
|
_netmac=$(kdump_get_mac_addr $_netdev)
|
|
_static=$(kdump_static_ip $_netdev $_srcaddr)
|
|
if [ -n "$_static" ]; then
|
|
_proto=none
|
|
else
|
|
_proto=dhcp
|
|
fi
|
|
|
|
get_routes $_netdev $_target
|
|
|
|
_ip_conf="${initdir}/etc/cmdline.d/40ip.conf"
|
|
_ip_opts=" ip=${_static}$(kdump_setup_ifname $_netdev):${_proto}"
|
|
|
|
# dracut doesn't allow duplicated configuration for same NIC, even they're exactly the same.
|
|
# so we have to avoid adding duplicates
|
|
# We should also check /proc/cmdline for existing ip=xx arg.
|
|
# For example, iscsi boot will specify ip=xxx arg in cmdline.
|
|
if [ ! -f $_ip_conf ] || ! grep -q $_ip_opts $_ip_conf &&\
|
|
! grep -q "ip=[^[:space:]]*$_netdev" /proc/cmdline; then
|
|
echo "$_ip_opts" >> $_ip_conf
|
|
fi
|
|
|
|
if kdump_is_bridge "$_netdev"; then
|
|
kdump_setup_bridge "$_netdev"
|
|
elif kdump_is_bond "$_netdev"; then
|
|
kdump_setup_bond "$_netdev"
|
|
elif kdump_is_team "$_netdev"; then
|
|
kdump_setup_team "$_netdev"
|
|
elif kdump_is_vlan "$_netdev"; then
|
|
kdump_setup_vlan "$_netdev"
|
|
else
|
|
_ifname_opts=" ifname=$(kdump_setup_ifname $_netdev):$(kdump_get_mac_addr $_netdev)"
|
|
echo "$_ifname_opts" >> $_ip_conf
|
|
fi
|
|
|
|
kdump_setup_dns "$_netdev"
|
|
}
|
|
|
|
#Function:kdump_install_net
|
|
#$1: config values of net line in kdump.conf
|
|
#$2: srcaddr of network device
|
|
kdump_install_net() {
|
|
local _server _netdev _srcaddr
|
|
local config_val="$1"
|
|
|
|
_server=`echo $config_val | sed 's/.*@//' | cut -d':' -f1`
|
|
|
|
_need_dns=`echo $_server|grep "[a-zA-Z]"`
|
|
[ -n "$_need_dns" ] && _server=`getent hosts $_server|cut -d' ' -f1`
|
|
|
|
_netdev=`/sbin/ip route get to $_server 2>&1`
|
|
[ $? != 0 ] && echo "Bad kdump location: $config_val" && exit 1
|
|
|
|
#the field in the ip output changes if we go to another subnet
|
|
if [ -n "`echo $_netdev | grep via`" ]
|
|
then
|
|
# we are going to a different subnet
|
|
_srcaddr=`echo $_netdev|awk '{print $7}'|head -n 1`
|
|
_netdev=`echo $_netdev|awk '{print $5;}'|head -n 1`
|
|
else
|
|
# we are on the same subnet
|
|
_srcaddr=`echo $_netdev|awk '{print $5}'|head -n 1`
|
|
_netdev=`echo $_netdev|awk '{print $3}'|head -n 1`
|
|
fi
|
|
|
|
kdump_setup_netdev "${_netdev}" "${_srcaddr}" "${_server}"
|
|
|
|
#save netdev used for kdump as cmdline
|
|
# Whoever calling kdump_install_net() is setting up the default gateway,
|
|
# ie. bootdev/kdumpnic. So don't override the setting if calling
|
|
# kdump_install_net() for another time. For example, after setting eth0 as
|
|
# the default gate way for network dump, eth1 in the fence kdump path will
|
|
# call kdump_install_net again and we don't want eth1 to be the default
|
|
# gateway.
|
|
if [ ! -f ${initdir}${initdir}/etc/cmdline.d/60kdumpnic.conf ] &&
|
|
[ ! -f ${initdir}/etc/cmdline.d/70bootdev.conf ]; then
|
|
echo "kdumpnic=$(kdump_setup_ifname $_netdev)" > ${initdir}/etc/cmdline.d/60kdumpnic.conf
|
|
echo "bootdev=$(kdump_setup_ifname $_netdev)" > ${initdir}/etc/cmdline.d/70bootdev.conf
|
|
fi
|
|
}
|
|
|
|
default_dump_target_install_conf()
|
|
{
|
|
local _target _fstype
|
|
local _s _t
|
|
local _mntpoint
|
|
local _path _save_path
|
|
|
|
is_user_configured_dump_target && return
|
|
|
|
_save_path=$(grep ^path "/etc/kdump.conf"| cut -d' ' -f2)
|
|
[ -z "$_save_path" ] && _save_path=$DEFAULT_PATH
|
|
|
|
_mntpoint=$(get_mntpoint_from_path $_save_path)
|
|
_target=$(get_target_from_path $_save_path)
|
|
if [ "$_mntpoint" != "/" ]; then
|
|
_fstype=$(get_fs_type_from_target $_target)
|
|
|
|
if $(is_fs_type_nfs $_fstype); then
|
|
kdump_install_net "$_target"
|
|
_fstype="nfs"
|
|
else
|
|
_target=$(kdump_to_udev_name $_target)
|
|
fi
|
|
|
|
echo "$_fstype $_target" >> /tmp/$$-kdump.conf
|
|
|
|
_path=${_save_path##"$_mntpoint"}
|
|
sed -i -e "s#$_save_path#$_path#" /tmp/$$-kdump.conf
|
|
fi
|
|
|
|
}
|
|
|
|
#install kdump.conf and what user specifies in kdump.conf
|
|
kdump_install_conf() {
|
|
sed -ne '/^#/!p' /etc/kdump.conf > /tmp/$$-kdump.conf
|
|
|
|
while read config_opt config_val;
|
|
do
|
|
# remove inline comments after the end of a directive.
|
|
config_val=$(strip_comments $config_val)
|
|
case "$config_opt" in
|
|
ext[234]|xfs|btrfs|minix|raw)
|
|
sed -i -e "s#$config_val#$(kdump_to_udev_name $config_val)#" /tmp/$$-kdump.conf
|
|
;;
|
|
ssh|nfs)
|
|
kdump_install_net "$config_val"
|
|
;;
|
|
kdump_pre|kdump_post|extra_bins)
|
|
dracut_install $config_val
|
|
;;
|
|
core_collector)
|
|
dracut_install "${config_val%%[[:blank:]]*}"
|
|
;;
|
|
esac
|
|
done < /etc/kdump.conf
|
|
|
|
default_dump_target_install_conf
|
|
|
|
kdump_configure_fence_kdump "/tmp/$$-kdump.conf"
|
|
inst "/tmp/$$-kdump.conf" "/etc/kdump.conf"
|
|
rm -f /tmp/$$-kdump.conf
|
|
}
|
|
|
|
kdump_iscsi_get_rec_val() {
|
|
|
|
local result
|
|
|
|
# The open-iscsi 742 release changed to using flat files in
|
|
# /var/lib/iscsi.
|
|
|
|
result=$(/sbin/iscsiadm --show -m session -r ${1} | grep "^${2} = ")
|
|
result=${result##* = }
|
|
echo $result
|
|
}
|
|
|
|
kdump_get_iscsi_initiator() {
|
|
local _initiator
|
|
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
|
|
|
|
[ -f "$initiator_conf" ] || return 1
|
|
|
|
while read _initiator; do
|
|
[ -z "${_initiator%%#*}" ] && continue # Skip comment lines
|
|
|
|
case $_initiator in
|
|
InitiatorName=*)
|
|
initiator=${_initiator#InitiatorName=}
|
|
echo "rd.iscsi.initiator=${initiator}"
|
|
return 0;;
|
|
*) ;;
|
|
esac
|
|
done < ${initiator_conf}
|
|
|
|
return 1
|
|
}
|
|
|
|
# No ibft handling yet.
|
|
kdump_setup_iscsi_device() {
|
|
local path=$1
|
|
local tgt_name; local tgt_ipaddr;
|
|
local username; local password; local userpwd_str;
|
|
local username_in; local password_in; local userpwd_in_str;
|
|
local netdev
|
|
local srcaddr
|
|
local idev
|
|
local netroot_str ; local initiator_str;
|
|
local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf"
|
|
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
|
|
|
|
dinfo "Found iscsi component $1"
|
|
|
|
# Check once before getting explicit values, so we can output a decent
|
|
# error message.
|
|
|
|
if ! /sbin/iscsiadm -m session -r ${path} >/dev/null ; then
|
|
derror "Unable to find iscsi record for $path"
|
|
return 1
|
|
fi
|
|
|
|
tgt_name=$(kdump_iscsi_get_rec_val ${path} "node.name")
|
|
tgt_ipaddr=$(kdump_iscsi_get_rec_val ${path} "node.conn\[0\].address")
|
|
|
|
# get and set username and password details
|
|
username=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username")
|
|
[ "$username" == "<empty>" ] && username=""
|
|
password=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password")
|
|
[ "$password" == "<empty>" ] && password=""
|
|
username_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username_in")
|
|
[ -n "$username" ] && userpwd_str="$username:$password"
|
|
|
|
# get and set incoming username and password details
|
|
[ "$username_in" == "<empty>" ] && username_in=""
|
|
password_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password_in")
|
|
[ "$password_in" == "<empty>" ] && password_in=""
|
|
|
|
[ -n "$username_in" ] && userpwd_in_str=":$username_in:$password_in"
|
|
|
|
netdev=$(/sbin/ip route get to ${tgt_ipaddr} | \
|
|
sed 's|.*dev \(.*\).*|\1|g')
|
|
srcaddr=$(echo $netdev | awk '{ print $3; exit }')
|
|
netdev=$(echo $netdev | awk '{ print $1; exit }')
|
|
|
|
kdump_setup_netdev $netdev $srcaddr $tgt_ipaddr
|
|
|
|
# prepare netroot= command line
|
|
# FIXME: IPV6 addresses require explicit [] around $tgt_ipaddr
|
|
# FIXME: Do we need to parse and set other parameters like protocol, port
|
|
# iscsi_iface_name, netdev_name, LUN etc.
|
|
|
|
netroot_str="netroot=iscsi:${userpwd_str}${userpwd_in_str}@$tgt_ipaddr::::$tgt_name"
|
|
|
|
[[ -f $netroot_conf ]] || touch $netroot_conf
|
|
|
|
# If netroot target does not exist already, append.
|
|
if ! grep -q $netroot_str $netroot_conf; then
|
|
echo $netroot_str >> $netroot_conf
|
|
dinfo "Appended $netroot_str to $netroot_conf"
|
|
fi
|
|
|
|
# Setup initator
|
|
initiator_str=$(kdump_get_iscsi_initiator)
|
|
[ $? -ne "0" ] && derror "Failed to get initiator name" && return 1
|
|
|
|
# If initiator details do not exist already, append.
|
|
if ! grep -q "$initiator_str" $netroot_conf; then
|
|
echo "$initiator_str" >> $netroot_conf
|
|
dinfo "Appended "$initiator_str" to $netroot_conf"
|
|
fi
|
|
}
|
|
|
|
kdump_check_iscsi_targets () {
|
|
# If our prerequisites are not met, fail anyways.
|
|
type -P iscsistart >/dev/null || return 1
|
|
|
|
kdump_check_setup_iscsi() (
|
|
local _dev
|
|
_dev=$1
|
|
|
|
[[ -L /sys/dev/block/$_dev ]] || return
|
|
cd "$(readlink -f /sys/dev/block/$_dev)"
|
|
until [[ -d sys || -d iscsi_session ]]; do
|
|
cd ..
|
|
done
|
|
[[ -d iscsi_session ]] && kdump_setup_iscsi_device "$PWD"
|
|
)
|
|
|
|
[[ $hostonly ]] || [[ $mount_needs ]] && {
|
|
for_each_host_dev_and_slaves_all kdump_check_setup_iscsi
|
|
}
|
|
}
|
|
|
|
# retrieves fence_kdump nodes from Pacemaker cluster configuration
|
|
get_pcs_fence_kdump_nodes() {
|
|
local nodes
|
|
|
|
# get cluster nodes from cluster cib, get interface and ip address
|
|
nodelist=`pcs cluster cib | xmllint --xpath "/cib/status/node_state/@uname" -`
|
|
|
|
# nodelist is formed as 'uname="node1" uname="node2" ... uname="nodeX"'
|
|
# we need to convert each to node1, node2 ... nodeX in each iteration
|
|
for node in ${nodelist}; do
|
|
# convert $node from 'uname="nodeX"' to 'nodeX'
|
|
eval $node
|
|
nodename=$uname
|
|
# Skip its own node name
|
|
if [ "$nodename" = `hostname` -o "$nodename" = `hostname -s` ]; then
|
|
continue
|
|
fi
|
|
nodes="$nodes $nodename"
|
|
done
|
|
|
|
echo $nodes
|
|
}
|
|
|
|
# retrieves fence_kdump args from config file
|
|
get_pcs_fence_kdump_args() {
|
|
if [ -f $FENCE_KDUMP_CONFIG_FILE ]; then
|
|
. $FENCE_KDUMP_CONFIG_FILE
|
|
echo $FENCE_KDUMP_OPTS
|
|
fi
|
|
}
|
|
|
|
# setup fence_kdump in cluster
|
|
# setup proper network and install needed files
|
|
kdump_configure_fence_kdump () {
|
|
local kdump_cfg_file=$1
|
|
local nodes
|
|
local args
|
|
|
|
if is_generic_fence_kdump; then
|
|
nodes=$(get_option_value "fence_kdump_nodes")
|
|
|
|
elif is_pcs_fence_kdump; then
|
|
nodes=$(get_pcs_fence_kdump_nodes)
|
|
|
|
# set appropriate options in kdump.conf
|
|
echo "fence_kdump_nodes $nodes" >> ${kdump_cfg_file}
|
|
|
|
args=$(get_pcs_fence_kdump_args)
|
|
if [ -n "$args" ]; then
|
|
echo "fence_kdump_args $args" >> ${kdump_cfg_file}
|
|
fi
|
|
|
|
else
|
|
# fence_kdump not configured
|
|
return 1
|
|
fi
|
|
|
|
# setup network for each node
|
|
for node in ${nodes}; do
|
|
kdump_install_net $node
|
|
done
|
|
|
|
dracut_install $FENCE_KDUMP_SEND
|
|
}
|
|
|
|
# Install a random seed used to feed /dev/urandom
|
|
# By the time kdump service starts, /dev/uramdom is already fed by systemd
|
|
kdump_install_random_seed() {
|
|
local poolsize=`cat /proc/sys/kernel/random/poolsize`
|
|
|
|
if [ ! -d ${initdir}/var/lib/ ]; then
|
|
mkdir -p ${initdir}/var/lib/
|
|
fi
|
|
|
|
dd if=/dev/urandom of=${initdir}/var/lib/random-seed \
|
|
bs=$poolsize count=1 2> /dev/null
|
|
}
|
|
|
|
install() {
|
|
kdump_install_conf
|
|
|
|
if is_ssh_dump_target; then
|
|
kdump_install_random_seed
|
|
fi
|
|
dracut_install -o /etc/adjtime /etc/localtime
|
|
inst "$moddir/monitor_dd_progress" "/kdumpscripts/monitor_dd_progress"
|
|
chmod +x ${initdir}/kdumpscripts/monitor_dd_progress
|
|
inst "/bin/dd" "/bin/dd"
|
|
inst "/bin/tail" "/bin/tail"
|
|
inst "/bin/date" "/bin/date"
|
|
inst "/bin/sync" "/bin/sync"
|
|
inst "/bin/cut" "/bin/cut"
|
|
inst "/sbin/makedumpfile" "/sbin/makedumpfile"
|
|
inst "/sbin/vmcore-dmesg" "/sbin/vmcore-dmesg"
|
|
inst "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh"
|
|
inst "/lib/kdump/kdump-lib-initramfs.sh" "/lib/kdump-lib-initramfs.sh"
|
|
inst "$moddir/kdump.sh" "/usr/bin/kdump.sh"
|
|
inst "$moddir/kdump-capture.service" "$systemdsystemunitdir/kdump-capture.service"
|
|
ln_r "$systemdsystemunitdir/kdump-capture.service" "$systemdsystemunitdir/initrd.target.wants/kdump-capture.service"
|
|
inst "$moddir/kdump-error-handler.sh" "/usr/bin/kdump-error-handler.sh"
|
|
inst "$moddir/kdump-error-handler.service" "$systemdsystemunitdir/kdump-error-handler.service"
|
|
# Replace existing emergency service
|
|
cp "$moddir/kdump-emergency.service" "$initdir/$systemdsystemunitdir/emergency.service"
|
|
# Also redirect dracut-emergency to kdump error handler
|
|
ln_r "$systemdsystemunitdir/emergency.service" "$systemdsystemunitdir/dracut-emergency.service"
|
|
|
|
# Check for all the devices and if any device is iscsi, bring up iscsi
|
|
# target. Ideally all this should be pushed into dracut iscsi module
|
|
# at some point of time.
|
|
kdump_check_iscsi_targets
|
|
}
|
|
|
|
installkernel() {
|
|
wdt=$(lsmod|cut -f1 -d' '|grep "wdt$")
|
|
if [ -n "$wdt" ]; then
|
|
[ "$wdt" = "iTCO_wdt" ] && instmods lpc_ich
|
|
instmods $wdt
|
|
fi
|
|
}
|