568623e69a
A NIC may get a different name in the kdump kernel from 1st kernel
in cases like,
- kernel assigned network interface names are not persistent e.g. [1]
- there is an udev rule to rename the NIC in the 1st kernel but the
kdump initrd may not have that rule e.g. [2]
If NM tries to match a NIC with a connection profile based on NIC name
i.e. connection.interface-name, it will fail the above bases. A simple
solution is to ask NM to match a connection profile by MAC address.
Note we don't need to do this for user-created NICs like vlan, bridge and
bond.
An remaining issue is passing the name of a NIC via the kdumpnic dracut
command line parameter which requires passing ifname=<interface>:<MAC> to
have fixed NIC name. But we can simply drop this requirement. kdumpnic
is needed because kdump needs to get the IP by NIC name and use the IP
to created a dumping folder named "{IP}-{DATE}". We can simply pass the
IP to the kdump kernel directly via a new dracut command line parameter
kdumpip instead. In addition to the benefit of simplifying the code,
there are other three benefits brought by this approach,
- make use of whatever network to transfer the vmcore. Because as long
as we have the network to we don't care which NIC is active.
- if obtained IP in the kdump kernel is different from the one in the
1st kernel. "{IP}-{DATE}" would better tell where the dumped vmcore
comes from.
- without passing ifname=<interface>:<MAC> to kdump initrd, the
issue of there are two interfaces with the same MAC address for
Azure Hyper-V NIC SR-IOV [3] is resolved automatically.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1121778
[2] https://bugzilla.redhat.com/show_bug.cgi?id=810107
[3] https://bugzilla.redhat.com/show_bug.cgi?id=1962421
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
1088 lines
32 KiB
Bash
Executable File
1088 lines
32 KiB
Bash
Executable File
#!/bin/bash
|
|
|
|
_DRACUT_KDUMP_NM_TMP_DIR="/tmp/$$-DRACUT_KDUMP_NM"
|
|
|
|
_save_kdump_netifs() {
|
|
unique_netifs[$1]=1
|
|
}
|
|
|
|
_get_kdump_netifs() {
|
|
echo -n "${!unique_netifs[@]}"
|
|
}
|
|
|
|
cleanup() {
|
|
rm -rf "$_DRACUT_KDUMP_NM_TMP_DIR"
|
|
}
|
|
|
|
# shellcheck disable=SC2154 # known issue of shellcheck https://github.com/koalaman/shellcheck/issues/1299
|
|
trap 'ret=$?; cleanup; exit $ret;' EXIT
|
|
|
|
kdump_module_init() {
|
|
if ! [[ -d "${initdir}/tmp" ]]; then
|
|
mkdir -p "${initdir}/tmp"
|
|
fi
|
|
|
|
mkdir -p "$_DRACUT_KDUMP_NM_TMP_DIR"
|
|
|
|
. /lib/kdump/kdump-lib.sh
|
|
}
|
|
|
|
check() {
|
|
[[ $debug ]] && set -x
|
|
#kdumpctl sets this explicitly
|
|
if [[ -z $IN_KDUMP ]] || [[ ! -f /etc/kdump.conf ]]; then
|
|
return 1
|
|
fi
|
|
return 0
|
|
}
|
|
|
|
depends() {
|
|
local _dep="base shutdown"
|
|
|
|
kdump_module_init
|
|
|
|
add_opt_module() {
|
|
[[ " $omit_dracutmodules " != *\ $1\ * ]] && _dep="$_dep $1"
|
|
}
|
|
|
|
if is_squash_available; then
|
|
add_opt_module squash
|
|
else
|
|
dwarning "Required modules to build a squashed kdump image is missing!"
|
|
fi
|
|
|
|
if is_wdt_active; then
|
|
add_opt_module watchdog
|
|
fi
|
|
|
|
if is_ssh_dump_target; then
|
|
_dep="$_dep ssh-client"
|
|
fi
|
|
|
|
if is_lvm2_thinp_dump_target; then
|
|
if dracut --list-modules | grep -q lvmthinpool-monitor; then
|
|
add_opt_module lvmthinpool-monitor
|
|
else
|
|
dwarning "Required lvmthinpool-monitor modules is missing! Please upgrade dracut >= 057."
|
|
fi
|
|
fi
|
|
|
|
if [[ "$(uname -m)" == "s390x" ]]; then
|
|
_dep="$_dep znet"
|
|
fi
|
|
|
|
if [[ -n "$(ls -A /sys/class/drm 2> /dev/null)" ]] || [[ -d /sys/module/hyperv_fb ]]; then
|
|
add_opt_module drm
|
|
fi
|
|
|
|
if is_generic_fence_kdump || is_pcs_fence_kdump; then
|
|
_dep="$_dep network"
|
|
fi
|
|
|
|
echo "$_dep"
|
|
}
|
|
|
|
kdump_is_bridge() {
|
|
[[ -d /sys/class/net/"$1"/bridge ]]
|
|
}
|
|
|
|
kdump_is_bond() {
|
|
[[ -d /sys/class/net/"$1"/bonding ]]
|
|
}
|
|
|
|
kdump_is_team() {
|
|
[[ -f /usr/bin/teamnl ]] && teamnl "$1" ports &> /dev/null
|
|
}
|
|
|
|
kdump_is_vlan() {
|
|
[[ -f /proc/net/vlan/"$1" ]]
|
|
}
|
|
|
|
# $1: netdev name
|
|
source_ifcfg_file() {
|
|
local ifcfg_file
|
|
|
|
dwarning "Network Scripts are deprecated. You are encouraged to set up network by NetworkManager."
|
|
ifcfg_file=$(get_ifcfg_filename "$1")
|
|
if [[ -f ${ifcfg_file} ]]; then
|
|
. "${ifcfg_file}"
|
|
else
|
|
dwarning "The ifcfg file of $1 is not found!"
|
|
fi
|
|
}
|
|
|
|
# $1: repeat times
|
|
# $2: string to be repeated
|
|
# $3: separator
|
|
repeatedly_join_str() {
|
|
local _count="$1"
|
|
local _str="$2"
|
|
local _separator="$3"
|
|
local i _res
|
|
|
|
if [[ $_count -le 0 ]]; then
|
|
echo -n ""
|
|
return
|
|
fi
|
|
|
|
i=0
|
|
_res="$_str"
|
|
((_count--))
|
|
|
|
while [[ $i -lt $_count ]]; do
|
|
((i++))
|
|
_res="${_res}${_separator}${_str}"
|
|
done
|
|
echo -n "$_res"
|
|
}
|
|
|
|
# $1: prefix
|
|
# $2: ipv6_flag="-6" indicates it's IPv6
|
|
# Given a prefix, calculate the netmask (equivalent of "ipcalc -m")
|
|
# by concatenating three parts,
|
|
# 1) the groups with all bits set 1
|
|
# 2) a group with partial bits set to 0
|
|
# 3) the groups with all bits set to 0
|
|
cal_netmask_by_prefix() {
|
|
local _prefix="$1"
|
|
local _ipv6_flag="$2" _ipv6
|
|
local _bits_per_octet=8
|
|
local _count _res _octets_per_group _octets_total _seperator _total_groups
|
|
local _max_group_value _max_group_value_repr _bits_per_group _tmp _zero_bits
|
|
|
|
if [[ $_ipv6_flag == "-6" ]]; then
|
|
_ipv6=1
|
|
else
|
|
_ipv6=0
|
|
fi
|
|
|
|
if [[ $_prefix -lt 0 || $_prefix -gt 128 ]] \
|
|
|| ( ((!_ipv6)) && [[ $_prefix -gt 32 ]]); then
|
|
derror "Bad prefix:$_prefix for calculating netmask"
|
|
exit 1
|
|
fi
|
|
|
|
if ((_ipv6)); then
|
|
_octets_per_group=2
|
|
_octets_total=16
|
|
_seperator=":"
|
|
else
|
|
_octets_per_group=1
|
|
_octets_total=4
|
|
_seperator="."
|
|
fi
|
|
|
|
_total_groups=$((_octets_total / _octets_per_group))
|
|
_bits_per_group=$((_octets_per_group * _bits_per_octet))
|
|
_max_group_value=$(((1 << _bits_per_group) - 1))
|
|
|
|
if ((_ipv6)); then
|
|
_max_group_value_repr=$(printf "%x" $_max_group_value)
|
|
else
|
|
_max_group_value_repr="$_max_group_value"
|
|
fi
|
|
|
|
_count=$((_prefix / _octets_per_group / _bits_per_octet))
|
|
_first_part=$(repeatedly_join_str "$_count" "$_max_group_value_repr" "$_seperator")
|
|
_res="$_first_part"
|
|
|
|
_tmp=$((_octets_total * _bits_per_octet - _prefix))
|
|
_zero_bits=$((_tmp % _bits_per_group))
|
|
if [[ $_zero_bits -ne 0 ]]; then
|
|
_second_part=$((_max_group_value >> _zero_bits << _zero_bits))
|
|
if ((_ipv6)); then
|
|
_second_part=$(printf "%x" $_second_part)
|
|
fi
|
|
((_count++))
|
|
if [[ -z $_first_part ]]; then
|
|
_res="$_second_part"
|
|
else
|
|
_res="${_first_part}${_seperator}${_second_part}"
|
|
fi
|
|
fi
|
|
|
|
_count=$((_total_groups - _count))
|
|
if [[ $_count -eq 0 ]]; then
|
|
echo -n "$_res"
|
|
return
|
|
fi
|
|
|
|
if ((_ipv6)) && [[ $_count -gt 1 ]]; then
|
|
# use condensed notion for IPv6
|
|
_third_part=":"
|
|
else
|
|
_third_part=$(repeatedly_join_str "$_count" "0" "$_seperator")
|
|
fi
|
|
|
|
if [[ -z $_res ]] && ((!_ipv6)); then
|
|
echo -n "${_third_part}"
|
|
else
|
|
echo -n "${_res}${_seperator}${_third_part}"
|
|
fi
|
|
}
|
|
|
|
kdump_get_mac_addr() {
|
|
cat "/sys/class/net/$1/address"
|
|
}
|
|
|
|
#Bonding or team master modifies the mac address
|
|
#of its slaves, we should use perm address
|
|
kdump_get_perm_addr() {
|
|
local addr
|
|
addr=$(ethtool -P "$1" | sed -e 's/Permanent address: //')
|
|
if [[ -z $addr ]] || [[ $addr == "00:00:00:00:00:00" ]]; then
|
|
derror "Can't get the permanent address of $1"
|
|
else
|
|
echo "$addr"
|
|
fi
|
|
}
|
|
|
|
apply_nm_initrd_generator_timeouts() {
|
|
local _timeout_conf
|
|
|
|
_timeout_conf=$_DRACUT_KDUMP_NM_TMP_DIR/timeout_conf
|
|
cat << EOF > "$_timeout_conf"
|
|
[device-95-kdump]
|
|
carrier-wait-timeout=30000
|
|
|
|
[connection-95-kdump]
|
|
ipv4.dhcp-timeout=90
|
|
ipv6.dhcp-timeout=90
|
|
EOF
|
|
|
|
inst "$_timeout_conf" "/etc/NetworkManager/conf.d/95-kdump-timeouts.conf"
|
|
}
|
|
|
|
use_ipv4_or_ipv6() {
|
|
local _netif=$1 _uuid=$2
|
|
|
|
if [[ -v "ipv4_usage[$_netif]" ]]; then
|
|
nmcli connection modify --temporary "$_uuid" ipv4.may-fail no &> >(ddebug)
|
|
fi
|
|
|
|
if [[ -v "ipv6_usage[$_netif]" ]]; then
|
|
nmcli connection modify --temporary "$_uuid" ipv6.may-fail no &> >(ddebug)
|
|
fi
|
|
|
|
if [[ -v "ipv4_usage[$_netif]" ]] && [[ ! -v "ipv6_usage[$_netif]" ]]; then
|
|
nmcli connection modify --temporary "$_uuid" ipv6.method disabled &> >(ddebug)
|
|
elif [[ ! -v "ipv4_usage[$_netif]" ]] && [[ -v "ipv6_usage[$_netif]" ]]; then
|
|
nmcli connection modify --temporary "$_uuid" ipv4.method disabled &> >(ddebug)
|
|
fi
|
|
}
|
|
|
|
_clone_nmconnection() {
|
|
local _clone_output _name _unique_id
|
|
|
|
_unique_id=$1
|
|
_name=$(nmcli --get-values connection.id connection show "$_unique_id")
|
|
if _clone_output=$(nmcli connection clone --temporary uuid "$_unique_id" "$_name"); then
|
|
sed -E -n "s/.* \(.*\) cloned as.*\((.*)\)\.$/\1/p" <<< "$_clone_output"
|
|
return 0
|
|
fi
|
|
|
|
return 1
|
|
}
|
|
|
|
_match_nmconnection_by_mac() {
|
|
local _unique_id _dev _mac _mac_field
|
|
|
|
_unique_id=$1
|
|
_dev=$2
|
|
|
|
_mac=$(kdump_get_perm_addr "$_dev")
|
|
[[ $_mac != 'not set' ]] || return
|
|
_mac_field=$(nmcli --get-values connection.type connection show "$_unique_id").mac-address
|
|
nmcli connection modify --temporary "$_unique_id" "$_mac_field" "$_mac" &> >(ddebug)
|
|
nmcli connection modify --temporary "$_unique_id" "connection.interface-name" "" &> >(ddebug)
|
|
}
|
|
|
|
# Clone and modify NM connection profiles
|
|
#
|
|
# This function makes use of "nmcli clone" to automatically convert ifcfg-*
|
|
# files to Networkmanager .nmconnection connection profiles and also modify the
|
|
# properties of .nmconnection if necessary.
|
|
clone_and_modify_nmconnection() {
|
|
local _dev _cloned_nmconnection_file_path _tmp_nmconnection_file_path _old_uuid _uuid
|
|
|
|
_dev=$1
|
|
_nmconnection_file_path=$2
|
|
|
|
_old_uuid=$(nmcli --get-values connection.uuid connection show filename "$_nmconnection_file_path")
|
|
|
|
if ! _uuid=$(_clone_nmconnection "$_old_uuid"); then
|
|
derror "Failed to clone $_old_uuid"
|
|
exit 1
|
|
fi
|
|
|
|
use_ipv4_or_ipv6 "$_dev" "$_uuid"
|
|
|
|
nmcli connection modify --temporary uuid "$_uuid" connection.wait-device-timeout 60000 &> >(ddebug)
|
|
# For physical NIC i.e. non-user created NIC, ask NM to match a
|
|
# connection profile based on MAC address
|
|
_match_nmconnection_by_mac "$_uuid" "$_dev"
|
|
|
|
_cloned_nmconnection_file_path=$(nmcli --get-values UUID,FILENAME connection show | sed -n "s/^${_uuid}://p")
|
|
_tmp_nmconnection_file_path=$_DRACUT_KDUMP_NM_TMP_DIR/$(basename "$_nmconnection_file_path")
|
|
cp "$_cloned_nmconnection_file_path" "$_tmp_nmconnection_file_path"
|
|
# change uuid back to old value in case it's refered by other connection
|
|
# profile e.g. connection.master could be interface name of the master
|
|
# device or UUID of the master connection.
|
|
sed -i -E "s/(^uuid=).*$/\1${_old_uuid}/g" "$_tmp_nmconnection_file_path"
|
|
nmcli connection del "$_uuid" &> >(ddebug)
|
|
echo -n "$_tmp_nmconnection_file_path"
|
|
}
|
|
|
|
_install_nmconnection() {
|
|
local _src _nmconnection_name _dst
|
|
|
|
_src=$1
|
|
_nmconnection_name=$(basename "$_src")
|
|
_dst="/etc/NetworkManager/system-connections/$_nmconnection_name"
|
|
inst "$_src" "$_dst"
|
|
}
|
|
|
|
kdump_install_nmconnections() {
|
|
local _netif _nm_conn_path _cloned_nm_path
|
|
|
|
while IFS=: read -r _netif _nm_conn_path; do
|
|
[[ -v "unique_netifs[$_netif]" ]] || continue
|
|
if _cloned_nm_path=$(clone_and_modify_nmconnection "$_netif" "$_nm_conn_path"); then
|
|
_install_nmconnection "$_cloned_nm_path"
|
|
else
|
|
derror "Failed to install the .nmconnection for $_netif"
|
|
exit 1
|
|
fi
|
|
done <<< "$(nmcli -t -f device,filename connection show --active)"
|
|
|
|
# Stop dracut 35network-manger to calling nm-initrd-generator.
|
|
# Note this line of code can be removed after NetworkManager >= 1.35.2
|
|
# gets released.
|
|
echo > "${initdir}/usr/libexec/nm-initrd-generator"
|
|
}
|
|
|
|
kdump_install_nm_netif_allowlist() {
|
|
local _netif _except_netif _netif_allowlist _netif_allowlist_nm_conf
|
|
|
|
for _netif in $1; do
|
|
_per_mac=$(kdump_get_perm_addr "$_netif")
|
|
if [[ "$_per_mac" != 'not set' ]]; then
|
|
_except_netif="mac:$_per_mac"
|
|
else
|
|
_except_netif="interface-name:$_netif"
|
|
fi
|
|
_netif_allowlist="${_netif_allowlist}except:${_except_netif};"
|
|
done
|
|
|
|
_netif_allowlist_nm_conf=$_DRACUT_KDUMP_NM_TMP_DIR/netif_allowlist_nm_conf
|
|
cat << EOF > "$_netif_allowlist_nm_conf"
|
|
[device-others]
|
|
match-device=${_netif_allowlist}
|
|
managed=false
|
|
EOF
|
|
|
|
inst "$_netif_allowlist_nm_conf" "/etc/NetworkManager/conf.d/10-kdump-netif_allowlist.conf"
|
|
}
|
|
|
|
_get_nic_driver() {
|
|
ethtool -i "$1" | sed -n -E "s/driver: (.*)/\1/p"
|
|
}
|
|
|
|
kdump_install_nic_driver() {
|
|
local _netif _driver _drivers
|
|
|
|
_drivers=()
|
|
|
|
for _netif in $1; do
|
|
_driver=$(_get_nic_driver "$_netif")
|
|
if [[ -z $_driver ]]; then
|
|
derror "Failed to get the driver of $_netif"
|
|
exit 1
|
|
fi
|
|
|
|
if [[ $_driver == "802.1Q VLAN Support" ]]; then
|
|
# ethtool somehow doesn't return the driver name for a VLAN NIC
|
|
_driver=8021q
|
|
elif [[ $_driver == "team" ]]; then
|
|
# install the team mode drivers like team_mode_roundrobin.ko as well
|
|
_driver='=drivers/net/team'
|
|
fi
|
|
|
|
_drivers+=("$_driver")
|
|
done
|
|
|
|
instmods "${_drivers[@]}"
|
|
}
|
|
|
|
kdump_setup_bridge() {
|
|
local _netdev=$1
|
|
local _dev
|
|
for _dev in "/sys/class/net/$_netdev/brif/"*; do
|
|
[[ -e $_dev ]] || continue
|
|
_dev=${_dev##*/}
|
|
if kdump_is_bond "$_dev"; then
|
|
kdump_setup_bond "$_dev" || return 1
|
|
elif kdump_is_team "$_dev"; then
|
|
kdump_setup_team "$_dev"
|
|
elif kdump_is_vlan "$_dev"; then
|
|
kdump_setup_vlan "$_dev"
|
|
fi
|
|
_save_kdump_netifs "$_dev"
|
|
done
|
|
}
|
|
|
|
kdump_setup_bond() {
|
|
local _netdev="$1"
|
|
local _dev
|
|
|
|
for _dev in $(< "/sys/class/net/$_netdev/bonding/slaves"); do
|
|
_save_kdump_netifs "$_dev"
|
|
done
|
|
}
|
|
|
|
kdump_setup_team() {
|
|
local _netdev=$1
|
|
local _dev
|
|
for _dev in $(teamnl "$_netdev" ports | awk -F':' '{print $2}'); do
|
|
_save_kdump_netifs "$_dev"
|
|
done
|
|
}
|
|
|
|
kdump_setup_vlan() {
|
|
local _netdev=$1
|
|
local _parent_netif
|
|
|
|
_parent_netif="$(awk '/^Device:/{print $2}' /proc/net/vlan/"$_netdev")"
|
|
|
|
#Just support vlan over bond and team
|
|
if kdump_is_bridge "$_parent_netif"; then
|
|
derror "Vlan over bridge is not supported!"
|
|
exit 1
|
|
elif kdump_is_bond "$_parent_netif"; then
|
|
kdump_setup_bond "$_parent_netif" || return 1
|
|
elif kdump_is_team "$_parent_netif"; then
|
|
kdump_setup_team "$_parent_netif" || return 1
|
|
fi
|
|
|
|
_save_kdump_netifs "$_parent_netif"
|
|
}
|
|
|
|
# find online znet device
|
|
# return ifname (_netdev)
|
|
# code reaped from the list_configured function of
|
|
# https://github.com/hreinecke/s390-tools/blob/master/zconf/znetconf
|
|
find_online_znet_device() {
|
|
local CCWGROUPBUS_DEVICEDIR="/sys/bus/ccwgroup/devices"
|
|
local NETWORK_DEVICES d ifname ONLINE
|
|
|
|
[[ ! -d $CCWGROUPBUS_DEVICEDIR ]] && return
|
|
NETWORK_DEVICES=$(find $CCWGROUPBUS_DEVICEDIR)
|
|
for d in $NETWORK_DEVICES; do
|
|
[[ ! -f "$d/online" ]] && continue
|
|
read -r ONLINE < "$d/online"
|
|
if [[ $ONLINE -ne 1 ]]; then
|
|
continue
|
|
fi
|
|
# determine interface name, if there (only for qeth and if
|
|
# device is online)
|
|
if [[ -f $d/if_name ]]; then
|
|
read -r ifname < "$d/if_name"
|
|
elif [[ -d $d/net ]]; then
|
|
ifname=$(ls "$d/net/")
|
|
fi
|
|
[[ -n $ifname ]] && break
|
|
done
|
|
echo -n "$ifname"
|
|
}
|
|
|
|
# setup s390 znet cmdline
|
|
# $1: netdev (ifname)
|
|
# $2: nmcli connection path
|
|
kdump_setup_znet() {
|
|
local _netdev="$1"
|
|
local _conpath="$2"
|
|
local s390_prefix="802-3-ethernet.s390-"
|
|
local _options=""
|
|
local NETTYPE
|
|
local SUBCHANNELS
|
|
|
|
NETTYPE=$(get_nmcli_field_by_conpath "${s390_prefix}nettype" "$_conpath")
|
|
SUBCHANNELS=$(get_nmcli_field_by_conpath "${s390_prefix}subchannels" "$_conpath")
|
|
_options=$(get_nmcli_field_by_conpath "${s390_prefix}options" "$_conpath")
|
|
|
|
if [[ -z $NETTYPE || -z $SUBCHANNELS || -z $_options ]]; then
|
|
dwarning "Failed to get znet configuration via nmlci output. Now try sourcing ifcfg script."
|
|
source_ifcfg_file "$_netdev"
|
|
for i in $OPTIONS; do
|
|
_options=${_options},$i
|
|
done
|
|
fi
|
|
|
|
if [[ -z $NETTYPE || -z $SUBCHANNELS || -z $_options ]]; then
|
|
exit 1
|
|
fi
|
|
|
|
echo "rd.znet=${NETTYPE},${SUBCHANNELS},${_options} rd.znet_ifname=$_netdev:${SUBCHANNELS}" > "${initdir}/etc/cmdline.d/30znet.conf"
|
|
}
|
|
|
|
kdump_get_remote_ip() {
|
|
local _remote _remote_temp
|
|
_remote=$(get_remote_host "$1")
|
|
if is_hostname "$_remote"; then
|
|
_remote_temp=$(getent ahosts "$_remote" | grep -v : | head -n 1)
|
|
if [[ -z $_remote_temp ]]; then
|
|
_remote_temp=$(getent ahosts "$_remote" | head -n 1)
|
|
fi
|
|
_remote=$(echo "$_remote_temp" | awk '{print $1}')
|
|
fi
|
|
echo "$_remote"
|
|
}
|
|
|
|
# Collect netifs needed by kdump
|
|
# $1: destination host
|
|
kdump_collect_netif_usage() {
|
|
local _destaddr _srcaddr _route _netdev
|
|
local _znet_netdev _znet_conpath
|
|
|
|
_destaddr=$(kdump_get_remote_ip "$1")
|
|
_route=$(kdump_get_ip_route "$_destaddr")
|
|
_srcaddr=$(kdump_get_ip_route_field "$_route" "src")
|
|
_netdev=$(kdump_get_ip_route_field "$_route" "dev")
|
|
|
|
_znet_netdev=$(find_online_znet_device)
|
|
if [[ -n $_znet_netdev ]]; then
|
|
_znet_conpath=$(get_nmcli_connection_apath_by_ifname "$_znet_netdev")
|
|
if ! (kdump_setup_znet "$_znet_netdev" "$_znet_conpath"); then
|
|
derror "Failed to set up znet"
|
|
exit 1
|
|
fi
|
|
fi
|
|
|
|
if kdump_is_bridge "$_netdev"; then
|
|
kdump_setup_bridge "$_netdev"
|
|
elif kdump_is_bond "$_netdev"; then
|
|
kdump_setup_bond "$_netdev" || return 1
|
|
elif kdump_is_team "$_netdev"; then
|
|
kdump_setup_team "$_netdev"
|
|
elif kdump_is_vlan "$_netdev"; then
|
|
kdump_setup_vlan "$_netdev"
|
|
fi
|
|
_save_kdump_netifs "$_netdev"
|
|
|
|
if [[ ! -f ${initdir}/etc/cmdline.d/50neednet.conf ]]; then
|
|
# network-manager module needs this parameter
|
|
echo "rd.neednet" >> "${initdir}/etc/cmdline.d/50neednet.conf"
|
|
fi
|
|
|
|
if [[ ! -f ${initdir}/etc/cmdline.d/60kdumpip.conf ]]; then
|
|
echo "kdump_remote_ip=$_destaddr" > "${initdir}/etc/cmdline.d/60kdumpip.conf"
|
|
fi
|
|
|
|
if is_ipv6_address "$_srcaddr"; then
|
|
ipv6_usage[$_netdev]=1
|
|
else
|
|
ipv4_usage[$_netdev]=1
|
|
fi
|
|
}
|
|
|
|
# Setup dracut to bring up network interface that enable
|
|
# initramfs accessing giving destination
|
|
kdump_install_net() {
|
|
local _netifs
|
|
|
|
_netifs=$(_get_kdump_netifs)
|
|
if [[ -n "$_netifs" ]]; then
|
|
kdump_install_nmconnections
|
|
apply_nm_initrd_generator_timeouts
|
|
kdump_install_nm_netif_allowlist "$_netifs"
|
|
kdump_install_nic_driver "$_netifs"
|
|
fi
|
|
}
|
|
|
|
# install etc/kdump/pre.d and /etc/kdump/post.d
|
|
kdump_install_pre_post_conf() {
|
|
if [[ -d /etc/kdump/pre.d ]]; then
|
|
for file in /etc/kdump/pre.d/*; do
|
|
if [[ -x $file ]]; then
|
|
dracut_install "$file"
|
|
elif [[ $file != "/etc/kdump/pre.d/*" ]]; then
|
|
echo "$file is not executable"
|
|
fi
|
|
done
|
|
fi
|
|
|
|
if [[ -d /etc/kdump/post.d ]]; then
|
|
for file in /etc/kdump/post.d/*; do
|
|
if [[ -x $file ]]; then
|
|
dracut_install "$file"
|
|
elif [[ $file != "/etc/kdump/post.d/*" ]]; then
|
|
echo "$file is not executable"
|
|
fi
|
|
done
|
|
fi
|
|
}
|
|
|
|
default_dump_target_install_conf() {
|
|
local _target _fstype
|
|
local _mntpoint _save_path
|
|
|
|
is_user_configured_dump_target && return
|
|
|
|
_save_path=$(get_bind_mount_source "$(get_save_path)")
|
|
_target=$(get_target_from_path "$_save_path")
|
|
_mntpoint=$(get_mntpoint_from_target "$_target")
|
|
|
|
_fstype=$(get_fs_type_from_target "$_target")
|
|
if is_fs_type_nfs "$_fstype"; then
|
|
kdump_collect_netif_usage "$_target"
|
|
_fstype="nfs"
|
|
else
|
|
_target=$(kdump_get_persistent_dev "$_target")
|
|
fi
|
|
|
|
echo "$_fstype $_target" >> "${initdir}/tmp/$$-kdump.conf"
|
|
|
|
# don't touch the path under root mount
|
|
if [[ $_mntpoint != "/" ]]; then
|
|
_save_path=${_save_path##"$_mntpoint"}
|
|
fi
|
|
|
|
#erase the old path line, then insert the parsed path
|
|
sed -i "/^path/d" "${initdir}/tmp/$$-kdump.conf"
|
|
echo "path $_save_path" >> "${initdir}/tmp/$$-kdump.conf"
|
|
}
|
|
|
|
#install kdump.conf and what user specifies in kdump.conf
|
|
kdump_install_conf() {
|
|
local _opt _val _pdev
|
|
|
|
kdump_read_conf > "${initdir}/tmp/$$-kdump.conf"
|
|
|
|
while read -r _opt _val; do
|
|
# remove inline comments after the end of a directive.
|
|
case "$_opt" in
|
|
raw)
|
|
_pdev=$(persistent_policy="by-id" kdump_get_persistent_dev "$_val")
|
|
sed -i -e "s#^${_opt}[[:space:]]\+$_val#$_opt $_pdev#" "${initdir}/tmp/$$-kdump.conf"
|
|
;;
|
|
ext[234] | xfs | btrfs | minix | virtiofs)
|
|
_pdev=$(kdump_get_persistent_dev "$_val")
|
|
sed -i -e "s#^${_opt}[[:space:]]\+$_val#$_opt $_pdev#" "${initdir}/tmp/$$-kdump.conf"
|
|
;;
|
|
ssh | nfs)
|
|
kdump_collect_netif_usage "$_val"
|
|
;;
|
|
dracut_args)
|
|
if [[ $(get_dracut_args_fstype "$_val") == nfs* ]]; then
|
|
kdump_collect_netif_usage "$(get_dracut_args_target "$_val")"
|
|
fi
|
|
;;
|
|
kdump_pre | kdump_post | extra_bins)
|
|
# shellcheck disable=SC2086
|
|
dracut_install $_val
|
|
;;
|
|
core_collector)
|
|
dracut_install "${_val%%[[:blank:]]*}"
|
|
;;
|
|
esac
|
|
done <<< "$(kdump_read_conf)"
|
|
|
|
kdump_install_pre_post_conf
|
|
|
|
default_dump_target_install_conf
|
|
|
|
kdump_configure_fence_kdump "${initdir}/tmp/$$-kdump.conf"
|
|
inst "${initdir}/tmp/$$-kdump.conf" "/etc/kdump.conf"
|
|
rm -f "${initdir}/tmp/$$-kdump.conf"
|
|
}
|
|
|
|
# Default sysctl parameters should suffice for kdump kernel.
|
|
# Remove custom configurations sysctl.conf & sysctl.d/*
|
|
remove_sysctl_conf() {
|
|
|
|
# As custom configurations like vm.min_free_kbytes can lead
|
|
# to OOM issues in kdump kernel, avoid them
|
|
rm -f "${initdir}/etc/sysctl.conf"
|
|
rm -rf "${initdir}/etc/sysctl.d"
|
|
rm -rf "${initdir}/run/sysctl.d"
|
|
rm -rf "${initdir}/usr/lib/sysctl.d"
|
|
}
|
|
|
|
kdump_iscsi_get_rec_val() {
|
|
|
|
local result
|
|
|
|
# The open-iscsi 742 release changed to using flat files in
|
|
# /var/lib/iscsi.
|
|
|
|
result=$(/sbin/iscsiadm --show -m session -r "$1" | grep "^${2} = ")
|
|
result=${result##* = }
|
|
echo "$result"
|
|
}
|
|
|
|
kdump_get_iscsi_initiator() {
|
|
local _initiator
|
|
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
|
|
|
|
[[ -f $initiator_conf ]] || return 1
|
|
|
|
while read -r _initiator; do
|
|
[[ -z ${_initiator%%#*} ]] && continue # Skip comment lines
|
|
|
|
case $_initiator in
|
|
InitiatorName=*)
|
|
initiator=${_initiator#InitiatorName=}
|
|
echo "rd.iscsi.initiator=${initiator}"
|
|
return 0
|
|
;;
|
|
*) ;;
|
|
esac
|
|
done < ${initiator_conf}
|
|
|
|
return 1
|
|
}
|
|
|
|
# Figure out iBFT session according to session type
|
|
is_ibft() {
|
|
[[ "$(kdump_iscsi_get_rec_val "$1" "node.discovery_type")" == fw ]]
|
|
}
|
|
|
|
kdump_setup_iscsi_device() {
|
|
local path=$1
|
|
local tgt_name
|
|
local tgt_ipaddr
|
|
local username
|
|
local password
|
|
local userpwd_str
|
|
local username_in
|
|
local password_in
|
|
local userpwd_in_str
|
|
local netroot_str
|
|
local initiator_str
|
|
local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf"
|
|
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
|
|
|
|
dinfo "Found iscsi component $1"
|
|
|
|
# Check once before getting explicit values, so we can bail out early,
|
|
# e.g. in case of pure-hardware(all-offload) iscsi.
|
|
if ! /sbin/iscsiadm -m session -r "$path" &> /dev/null; then
|
|
return 1
|
|
fi
|
|
|
|
if is_ibft "$path"; then
|
|
return
|
|
fi
|
|
|
|
# Remove software iscsi cmdline generated by 95iscsi,
|
|
# and let kdump regenerate here.
|
|
rm -f "${initdir}/etc/cmdline.d/95iscsi.conf"
|
|
|
|
tgt_name=$(kdump_iscsi_get_rec_val "$path" "node.name")
|
|
tgt_ipaddr=$(kdump_iscsi_get_rec_val "$path" "node.conn\[0\].address")
|
|
|
|
# get and set username and password details
|
|
username=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.username")
|
|
[[ $username == "<empty>" ]] && username=""
|
|
password=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.password")
|
|
[[ $password == "<empty>" ]] && password=""
|
|
username_in=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.username_in")
|
|
[[ -n $username ]] && userpwd_str="$username:$password"
|
|
|
|
# get and set incoming username and password details
|
|
[[ $username_in == "<empty>" ]] && username_in=""
|
|
password_in=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.password_in")
|
|
[[ $password_in == "<empty>" ]] && password_in=""
|
|
|
|
[[ -n $username_in ]] && userpwd_in_str=":$username_in:$password_in"
|
|
|
|
kdump_collect_netif_usage "$tgt_ipaddr"
|
|
|
|
# prepare netroot= command line
|
|
# FIXME: Do we need to parse and set other parameters like protocol, port
|
|
# iscsi_iface_name, netdev_name, LUN etc.
|
|
|
|
if is_ipv6_address "$tgt_ipaddr"; then
|
|
tgt_ipaddr="[$tgt_ipaddr]"
|
|
fi
|
|
netroot_str="netroot=iscsi:${userpwd_str}${userpwd_in_str}@$tgt_ipaddr::::$tgt_name"
|
|
|
|
[[ -f $netroot_conf ]] || touch "$netroot_conf"
|
|
|
|
# If netroot target does not exist already, append.
|
|
if ! grep -q "$netroot_str" "$netroot_conf"; then
|
|
echo "$netroot_str" >> "$netroot_conf"
|
|
dinfo "Appended $netroot_str to $netroot_conf"
|
|
fi
|
|
|
|
# Setup initator
|
|
if ! initiator_str=$(kdump_get_iscsi_initiator); then
|
|
derror "Failed to get initiator name"
|
|
return 1
|
|
fi
|
|
|
|
# If initiator details do not exist already, append.
|
|
if ! grep -q "$initiator_str" "$netroot_conf"; then
|
|
echo "$initiator_str" >> "$netroot_conf"
|
|
dinfo "Appended $initiator_str to $netroot_conf"
|
|
fi
|
|
}
|
|
|
|
kdump_check_iscsi_targets() {
|
|
# If our prerequisites are not met, fail anyways.
|
|
type -P iscsistart > /dev/null || return 1
|
|
|
|
kdump_check_setup_iscsi() (
|
|
local _dev
|
|
_dev=$1
|
|
|
|
[[ -L /sys/dev/block/$_dev ]] || return
|
|
cd "$(readlink -f "/sys/dev/block/$_dev")" || return 1
|
|
until [[ -d sys || -d iscsi_session ]]; do
|
|
cd ..
|
|
done
|
|
[[ -d iscsi_session ]] && kdump_setup_iscsi_device "$PWD"
|
|
)
|
|
|
|
[[ $hostonly ]] || [[ $mount_needs ]] && {
|
|
for_each_host_dev_and_slaves_all kdump_check_setup_iscsi
|
|
}
|
|
}
|
|
|
|
# hostname -a is deprecated, do it by ourself
|
|
get_alias() {
|
|
local ips
|
|
local entries
|
|
local alias_set
|
|
|
|
ips=$(hostname -I)
|
|
for ip in $ips; do
|
|
# in /etc/hosts, alias can come at the 2nd column
|
|
if entries=$(grep "$ip" /etc/hosts | awk '{ $1=""; print $0 }'); then
|
|
alias_set="$alias_set $entries"
|
|
fi
|
|
done
|
|
|
|
echo "$alias_set"
|
|
}
|
|
|
|
is_localhost() {
|
|
local hostnames
|
|
local shortnames
|
|
local aliasname
|
|
local nodename=$1
|
|
|
|
hostnames=$(hostname -A)
|
|
shortnames=$(hostname -A -s)
|
|
aliasname=$(get_alias)
|
|
hostnames="$hostnames $shortnames $aliasname"
|
|
|
|
for name in ${hostnames}; do
|
|
if [[ $name == "$nodename" ]]; then
|
|
return 0
|
|
fi
|
|
done
|
|
return 1
|
|
}
|
|
|
|
# retrieves fence_kdump nodes from Pacemaker cluster configuration
|
|
get_pcs_fence_kdump_nodes() {
|
|
local nodes
|
|
|
|
pcs cluster sync > /dev/null 2>&1 && pcs cluster cib-upgrade > /dev/null 2>&1
|
|
# get cluster nodes from cluster cib, get interface and ip address
|
|
nodelist=$(pcs cluster cib | xmllint --xpath "/cib/status/node_state/@uname" -)
|
|
|
|
# nodelist is formed as 'uname="node1" uname="node2" ... uname="nodeX"'
|
|
# we need to convert each to node1, node2 ... nodeX in each iteration
|
|
for node in ${nodelist}; do
|
|
# convert $node from 'uname="nodeX"' to 'nodeX'
|
|
eval "$node"
|
|
nodename="$uname"
|
|
# Skip its own node name
|
|
if is_localhost "$nodename"; then
|
|
continue
|
|
fi
|
|
nodes="$nodes $nodename"
|
|
done
|
|
|
|
echo "$nodes"
|
|
}
|
|
|
|
# retrieves fence_kdump args from config file
|
|
get_pcs_fence_kdump_args() {
|
|
if [[ -f $FENCE_KDUMP_CONFIG_FILE ]]; then
|
|
. "$FENCE_KDUMP_CONFIG_FILE"
|
|
echo "$FENCE_KDUMP_OPTS"
|
|
fi
|
|
}
|
|
|
|
get_generic_fence_kdump_nodes() {
|
|
local filtered
|
|
local nodes
|
|
|
|
nodes=$(kdump_get_conf_val "fence_kdump_nodes")
|
|
for node in ${nodes}; do
|
|
# Skip its own node name
|
|
if is_localhost "$node"; then
|
|
continue
|
|
fi
|
|
filtered="$filtered $node"
|
|
done
|
|
echo "$filtered"
|
|
}
|
|
|
|
# setup fence_kdump in cluster
|
|
# setup proper network and install needed files
|
|
kdump_configure_fence_kdump() {
|
|
local kdump_cfg_file=$1
|
|
local nodes
|
|
local args
|
|
|
|
if is_generic_fence_kdump; then
|
|
nodes=$(get_generic_fence_kdump_nodes)
|
|
|
|
elif is_pcs_fence_kdump; then
|
|
nodes=$(get_pcs_fence_kdump_nodes)
|
|
|
|
# set appropriate options in kdump.conf
|
|
echo "fence_kdump_nodes $nodes" >> "${kdump_cfg_file}"
|
|
|
|
args=$(get_pcs_fence_kdump_args)
|
|
if [[ -n $args ]]; then
|
|
echo "fence_kdump_args $args" >> "${kdump_cfg_file}"
|
|
fi
|
|
|
|
else
|
|
# fence_kdump not configured
|
|
return 1
|
|
fi
|
|
|
|
# setup network for each node
|
|
for node in ${nodes}; do
|
|
kdump_collect_netif_usage "$node"
|
|
done
|
|
|
|
dracut_install /etc/hosts
|
|
dracut_install /etc/nsswitch.conf
|
|
dracut_install "$FENCE_KDUMP_SEND"
|
|
}
|
|
|
|
# Install a random seed used to feed /dev/urandom
|
|
# By the time kdump service starts, /dev/uramdom is already fed by systemd
|
|
kdump_install_random_seed() {
|
|
local poolsize
|
|
|
|
poolsize=$(< /proc/sys/kernel/random/poolsize)
|
|
|
|
if [[ ! -d "${initdir}/var/lib/" ]]; then
|
|
mkdir -p "${initdir}/var/lib/"
|
|
fi
|
|
|
|
dd if=/dev/urandom of="${initdir}/var/lib/random-seed" \
|
|
bs="$poolsize" count=1 2> /dev/null
|
|
}
|
|
|
|
kdump_install_systemd_conf() {
|
|
# Kdump turns out to require longer default systemd mount timeout
|
|
# than 1st kernel(90s by default), we use default 300s for kdump.
|
|
if ! grep -q -r "^[[:space:]]*DefaultTimeoutStartSec=" "${initdir}/etc/systemd/system.conf"*; then
|
|
mkdir -p "${initdir}/etc/systemd/system.conf.d"
|
|
echo "[Manager]" > "${initdir}/etc/systemd/system.conf.d/kdump.conf"
|
|
echo "DefaultTimeoutStartSec=300s" >> "${initdir}/etc/systemd/system.conf.d/kdump.conf"
|
|
fi
|
|
|
|
# Forward logs to console directly, and don't read Kmsg, this avoids
|
|
# unneccessary memory consumption and make console output more useful.
|
|
# Only do so for non fadump image.
|
|
mkdir -p "${initdir}/etc/systemd/journald.conf.d"
|
|
echo "[Journal]" > "${initdir}/etc/systemd/journald.conf.d/kdump.conf"
|
|
echo "Storage=volatile" >> "${initdir}/etc/systemd/journald.conf.d/kdump.conf"
|
|
echo "ReadKMsg=no" >> "${initdir}/etc/systemd/journald.conf.d/kdump.conf"
|
|
echo "ForwardToConsole=yes" >> "${initdir}/etc/systemd/journald.conf.d/kdump.conf"
|
|
}
|
|
|
|
remove_cpu_online_rule() {
|
|
local file=${initdir}/usr/lib/udev/rules.d/40-redhat.rules
|
|
|
|
if [[ -f $file ]]; then
|
|
sed -i '/SUBSYSTEM=="cpu"/d' "$file"
|
|
fi
|
|
}
|
|
|
|
install() {
|
|
declare -A unique_netifs ipv4_usage ipv6_usage
|
|
local arch
|
|
|
|
kdump_module_init
|
|
kdump_install_conf
|
|
remove_sysctl_conf
|
|
|
|
# Onlining secondary cpus breaks kdump completely on KVM on Power hosts
|
|
# Though we use maxcpus=1 by default but 40-redhat.rules will bring up all
|
|
# possible cpus by default. (rhbz1270174 rhbz1266322)
|
|
# Thus before we get the kernel fix and the systemd rule fix let's remove
|
|
# the cpu online rule in kdump initramfs.
|
|
arch=$(uname -m)
|
|
if [[ "$arch" = "ppc64le" ]] || [[ "$arch" = "ppc64" ]]; then
|
|
remove_cpu_online_rule
|
|
fi
|
|
|
|
if is_ssh_dump_target; then
|
|
kdump_install_random_seed
|
|
fi
|
|
dracut_install -o /etc/adjtime /etc/localtime
|
|
inst "$moddir/monitor_dd_progress" "/kdumpscripts/monitor_dd_progress"
|
|
chmod +x "${initdir}/kdumpscripts/monitor_dd_progress"
|
|
inst "/bin/dd" "/bin/dd"
|
|
inst "/bin/tail" "/bin/tail"
|
|
inst "/bin/date" "/bin/date"
|
|
inst "/bin/sync" "/bin/sync"
|
|
inst "/bin/cut" "/bin/cut"
|
|
inst "/bin/head" "/bin/head"
|
|
inst "/bin/awk" "/bin/awk"
|
|
inst "/bin/sed" "/bin/sed"
|
|
inst "/bin/stat" "/bin/stat"
|
|
inst "/sbin/makedumpfile" "/sbin/makedumpfile"
|
|
inst "/sbin/vmcore-dmesg" "/sbin/vmcore-dmesg"
|
|
inst "/usr/bin/printf" "/sbin/printf"
|
|
inst "/usr/bin/logger" "/sbin/logger"
|
|
inst "/usr/bin/chmod" "/sbin/chmod"
|
|
inst "/lib/kdump/kdump-lib-initramfs.sh" "/lib/kdump-lib-initramfs.sh"
|
|
inst "/lib/kdump/kdump-logger.sh" "/lib/kdump-logger.sh"
|
|
inst "$moddir/kdump.sh" "/usr/bin/kdump.sh"
|
|
inst "$moddir/kdump-capture.service" "$systemdsystemunitdir/kdump-capture.service"
|
|
systemctl -q --root "$initdir" add-wants initrd.target kdump-capture.service
|
|
# Replace existing emergency service and emergency target
|
|
cp "$moddir/kdump-emergency.service" "$initdir/$systemdsystemunitdir/emergency.service"
|
|
cp "$moddir/kdump-emergency.target" "$initdir/$systemdsystemunitdir/emergency.target"
|
|
# Also redirect dracut-emergency to kdump error handler
|
|
ln_r "$systemdsystemunitdir/emergency.service" "$systemdsystemunitdir/dracut-emergency.service"
|
|
|
|
# Check for all the devices and if any device is iscsi, bring up iscsi
|
|
# target. Ideally all this should be pushed into dracut iscsi module
|
|
# at some point of time.
|
|
kdump_check_iscsi_targets
|
|
|
|
kdump_install_systemd_conf
|
|
|
|
# nfs/ssh dump will need to get host ip in second kernel and need to call 'ip' tool, see get_host_ip for more detail
|
|
if is_nfs_dump_target || is_ssh_dump_target; then
|
|
inst "ip"
|
|
fi
|
|
|
|
kdump_install_net
|
|
|
|
# For the lvm type target under kdump, in /etc/lvm/lvm.conf we can
|
|
# safely replace "reserved_memory=XXXX"(default value is 8192) with
|
|
# "reserved_memory=1024" to lower memory pressure under kdump. We do
|
|
# it unconditionally here, if "/etc/lvm/lvm.conf" doesn't exist, it
|
|
# actually does nothing.
|
|
sed -i -e \
|
|
's/\(^[[:space:]]*reserved_memory[[:space:]]*=\)[[:space:]]*[[:digit:]]*/\1 1024/' \
|
|
"${initdir}/etc/lvm/lvm.conf" &> /dev/null
|
|
|
|
# Save more memory by dropping switch root capability
|
|
dracut_no_switch_root
|
|
}
|