Add aarch64 specific kdump.sysconfig and use 'nr_cpus' instead of 'maxcpus'

'maxcpus' setting normally don't work on several kdump enabled systems
due to a known udev issue.

Currently the fedora kdump configuration is set as the following on the
aarch64 systems:

 # cat /etc/sysconfig/kdump
<..snip..>
  # This variable lets us append arguments to the current kdump
  # commandline after processed by KDUMP_COMMANDLINE_REMOVE
  # KDUMP_COMMANDLINE_APPEND="irqpoll maxcpus=1 reset_devices"
<..snip..>

Since the 'maxcpus' setting doesn't limit the number of SMP CPUs,
so the kdump kernel still boots with all CPUs available on the system.
For e.g on the qualcomm amberwing its 46 CPUs:

  # lscpu
Architecture:        aarch64
Byte Order:          Little Endian
CPU(s):              46
On-line CPU(s) list: 0-45
Thread(s) per core:  1
Core(s) per socket:  46
Socket(s):           1
NUMA node(s):        1
Vendor ID:           Qualcomm
Model:               1
Model name:          Falkor
Stepping:            0x0
CPU max MHz:         2600.0000
CPU min MHz:         600.0000
BogoMIPS:            40.00
L1d cache:           32K
L1i cache:           64K
L2 cache:            512K
L3 cache:            58880K
NUMA node0 CPU(s):   0-45
Flags:               fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid asimdrdm

This causes the memory consumption in the kdump kernel to swell up and
we can end up having OOM issues in the kdump kernel boot.

Whereas if we use 'nr_cpus=1' in the bootargs, the number of SMP CPUs in
the kdump kernel get limited to 1.

The 'swiotlb=noforce' setting in bootargs provide us extra guarding, to
ensure the crash kernel size requirements do not swell on systems
which support swiotlb.

With the above settings, crashkernel boots properly (without OOM) on all
the aarch64 boards I could test on - qualcomm amberwings, hp-moonshots
and hpe-apache (thunderx2) for crash dump saving on local disk.

Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>

kdump.sysconfig.aarch64

@@ -0,0 +1,37 @@
+# Kernel Version string for the -kdump kernel, such as 2.6.13-1544.FC5kdump
+# If no version is specified, then the init script will try to find a
+# kdump kernel with the same version number as the running kernel.
+KDUMP_KERNELVER=""
+
+# The kdump commandline is the command line that needs to be passed off to
+# the kdump kernel.  This will likely match the contents of the grub kernel
+# line.  For example:
+#   KDUMP_COMMANDLINE="ro root=LABEL=/"
+# Dracut depends on proper root= options, so please make sure that appropriate
+# root= options are copied from /proc/cmdline. In general it is best to append
+# command line options using "KDUMP_COMMANDLINE_APPEND=".
+# If a command line is not specified, the default will be taken from
+# /proc/cmdline
+KDUMP_COMMANDLINE=""
+
+# This variable lets us remove arguments from the current kdump commandline
+# as taken from either KDUMP_COMMANDLINE above, or from /proc/cmdline
+# NOTE: some arguments such as crashkernel will always be removed
+KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet"
+
+# This variable lets us append arguments to the current kdump commandline
+# after processed by KDUMP_COMMANDLINE_REMOVE
+KDUMP_COMMANDLINE_APPEND="irqpoll nr_cpus=1 swiotlb=noforce reset_devices"
+
+# Any additional kexec arguments required.  In most situations, this should
+# be left empty
+#
+# Example:
+#   KEXEC_ARGS="--elf32-core-headers"
+KEXEC_ARGS=""
+
+#Where to find the boot image
+#KDUMP_BOOTDIR="/boot"
+
+#What is the image type used for kdump
+KDUMP_IMG="vmlinuz"

kexec-tools.spec

@@ -33,6 +33,7 @@ Source25: kdumpctl.8
 Source26: live-image-kdump-howto.txt
 Source27: early-kdump-howto.txt
 Source28: kdump-udev-throttler
+Source29: kdump.sysconfig.aarch64
 
 #######################################
 # These are sources for mkdumpramfs