aa5ab7f890
* Mon Jul 13 2020 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.8.0-0.rc5.1] - v5.8-rc5 rebase - arm64: dts: sun50i-a64-pinephone: Add touchscreen support (Ondrej Jirman) - arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone (Icenowy Zheng) - drm/panel: st7703: Assert reset prior to powering down the regulators (Ondrej Jirman) - drm/panel: st7703: Enter sleep after display off (Ondrej Jirman) - drm/panel: st7703: Add support for Xingbangda XBD599 (Ondrej Jirman) - drm/panel: st7703: Move generic part of init sequence to enable callback (Ondrej Jirman) - drm/panel: st7703: Move code specific to jh057n closer together (Ondrej Jirman) - drm/panel: st7703: Prepare for supporting multiple panels (Ondrej Jirman) - drm/panel: st7703: Rename functions from jh057n prefix to st7703 (Ondrej Jirman) - drm/panel: rocktech-jh057n00900: Rename the driver to st7703 (Ondrej Jirman) - dt-bindings: panel: Add compatible for Xingbangda XBD599 panel (Ondrej Jirman) - dt-bindings: panel: Convert rocktech, jh057n00900 to yaml (Ondrej Jirman) - dt-bindings: vendor-prefixes: Add Xingbangda (Icenowy Zheng) - Revert "arm64: allwinner: dts: a64: add LCD-related device nodes for PinePhone" (Peter Robinson) - Revert "drm/sun4i: sun6i_mipi_dsi: fix horizontal timing calculation" (Peter Robinson) - Revert "drm: panel: add Xingbangda XBD599 panel" (Peter Robinson) - Revert "dt-bindings: panel: add binding for Xingbangda XBD599 panel" (Peter Robinson) - selinux: allow reading labels before policy is loaded (Jonathan Lebon) - Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL only (Peter Robinson) - Update config for renamed panel driver. (Peter Robinson) - Enable SERIAL_SC16IS7XX for SPI interfaces (Peter Robinson) - Updated changelog for the release based on dcde237b9b0e (Fedora Kernel Team) Resolves: rhbz# Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
120 lines
3.4 KiB
Diff
120 lines
3.4 KiB
Diff
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
|
|
From: Ondrej Jirman <megous@megous.com>
|
|
Date: Fri, 26 Jun 2020 02:55:50 +0200
|
|
Subject: [PATCH] dt-bindings: panel: Convert rocktech, jh057n00900 to yaml
|
|
|
|
Convert Rocktech MIPI DSI panel driver from txt to yaml bindings.
|
|
|
|
Signed-off-by: Ondrej Jirman <megous@megous.com>
|
|
---
|
|
.../display/panel/rocktech,jh057n00900.txt | 23 -------
|
|
.../display/panel/rocktech,jh057n00900.yaml | 66 +++++++++++++++++++
|
|
2 files changed, 66 insertions(+), 23 deletions(-)
|
|
delete mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
|
|
create mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
|
|
|
|
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
|
|
deleted file mode 100644
|
|
index a372c5d84695..000000000000
|
|
--- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
|
|
+++ /dev/null
|
|
@@ -1,23 +0,0 @@
|
|
-Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel
|
|
-
|
|
-Required properties:
|
|
-- compatible: should be "rocktech,jh057n00900"
|
|
-- reg: DSI virtual channel of the peripheral
|
|
-- reset-gpios: panel reset gpio
|
|
-- backlight: phandle of the backlight device attached to the panel
|
|
-- vcc-supply: phandle of the regulator that provides the vcc supply voltage.
|
|
-- iovcc-supply: phandle of the regulator that provides the iovcc supply
|
|
- voltage.
|
|
-
|
|
-Example:
|
|
-
|
|
- &mipi_dsi {
|
|
- panel@0 {
|
|
- compatible = "rocktech,jh057n00900";
|
|
- reg = <0>;
|
|
- backlight = <&backlight>;
|
|
- reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
|
|
- vcc-supply = <®_2v8_p>;
|
|
- iovcc-supply = <®_1v8_p>;
|
|
- };
|
|
- };
|
|
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
|
|
new file mode 100644
|
|
index 000000000000..f97c48550741
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
|
|
@@ -0,0 +1,66 @@
|
|
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
|
|
+%YAML 1.2
|
|
+---
|
|
+$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml#
|
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
+
|
|
+title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
|
|
+
|
|
+maintainers:
|
|
+ - Ondrej Jirman <megi@xff.cz>
|
|
+
|
|
+description: |
|
|
+ Rocktech JH057N00900 is a 720x1440 TFT LCD panel
|
|
+ connected using a MIPI-DSI video interface.
|
|
+
|
|
+allOf:
|
|
+ - $ref: panel-common.yaml#
|
|
+
|
|
+properties:
|
|
+ compatible:
|
|
+ const: rocktech,jh057n00900
|
|
+
|
|
+ reg:
|
|
+ maxItems: 1
|
|
+ description: DSI virtual channel
|
|
+
|
|
+ vcc-supply:
|
|
+ description: Panel power supply
|
|
+
|
|
+ vccio-supply:
|
|
+ description: I/O voltage supply
|
|
+
|
|
+ reset-gpios:
|
|
+ description: GPIO used for the reset pin
|
|
+ maxItems: 1
|
|
+
|
|
+ backlight:
|
|
+ description: Backlight used by the panel
|
|
+ $ref: "/schemas/types.yaml#/definitions/phandle"
|
|
+
|
|
+required:
|
|
+ - compatible
|
|
+ - reg
|
|
+ - vcc-supply
|
|
+ - vccio-supply
|
|
+ - reset-gpios
|
|
+
|
|
+additionalProperties: false
|
|
+
|
|
+examples:
|
|
+ - |
|
|
+ #include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
+ dsi {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ panel@0 {
|
|
+ compatible = "rocktech,jh057n00900";
|
|
+ reg = <0>;
|
|
+ vcc-supply = <®_2v8_p>;
|
|
+ iovcc-supply = <®_1v8_p>;
|
|
+ reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
|
|
+ backlight = <&backlight>;
|
|
+ };
|
|
+ };
|
|
+...
|
|
--
|
|
2.26.2
|
|
|