rpms
/
kernel
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
kernel/arm-sdhci-esdhc-imx-fixes.p...

173 lines
6.6 KiB
Diff
Raw Blame History

From patchwork Thu Jun 28 07:31:36 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: mmc: sdhci-esdhc-imx: support eMMC DDR mode when running at 3.3V
From: Stefan Agner <stefan@agner.ch>
X-Patchwork-Id: 10493185
Message-Id: <20180628073136.21748-1-stefan@agner.ch>
To: adrian.hunter@intel.com, ulf.hansson@linaro.org
Cc: fabio.estevam@nxp.com, haibo.chen@nxp.com, aisheng.dong@nxp.com,
michael@amarulasolutions.com, linux-mmc@vger.kernel.org,
linux-kernel@vger.kernel.org, Stefan Agner <stefan@agner.ch>
Date: Thu, 28 Jun 2018 09:31:36 +0200
The uSDHC supports DDR modes for eMMC devices running at 3.3V. This
allows to run eMMC with 3.3V signaling voltage at DDR52 mode:
# cat /sys/kernel/debug/mmc1/ios
clock: 52000000 Hz
vdd: 21 (3.3 ~ 3.4 V)
bus mode: 2 (push-pull)
chip select: 0 (don't care)
power mode: 2 (on)
bus width: 3 (8 bits)
timing spec: 8 (mmc DDR52)
signal voltage: 0 (3.30 V)
driver type: 0 (driver type B)
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index b716b933f00a..6f444731754d 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1324,7 +1324,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
if (esdhc_is_usdhc(imx_data)) {
host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
- host->mmc->caps |= MMC_CAP_1_8V_DDR;
+ host->mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR;
if (!(imx_data->socdata->flags & ESDHC_FLAG_HS200))
host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
From patchwork Thu Jun 28 08:13:29 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [1/3] mmc: sdhci-esdhc-imx: get rid of support_vsel
From: Stefan Agner <stefan@agner.ch>
X-Patchwork-Id: 10493269
Message-Id: <20180628081331.13051-2-stefan@agner.ch>
To: adrian.hunter@intel.com, ulf.hansson@linaro.org
Cc: fabio.estevam@nxp.com, haibo.chen@nxp.com, aisheng.dong@nxp.com,
michael@amarulasolutions.com, rmk+kernel@armlinux.org.uk,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
Stefan Agner <stefan@agner.ch>
Date: Thu, 28 Jun 2018 10:13:29 +0200
The field support_vsel is currently only used in the device tree
case. Get rid of it. No change in behavior.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 8 ++------
include/linux/platform_data/mmc-esdhc-imx.h | 2 --
2 files changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 6f444731754d..20a420b765b3 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1145,18 +1145,14 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
&boarddata->tuning_start_tap);
if (of_find_property(np, "no-1-8-v", NULL))
- boarddata->support_vsel = false;
- else
- boarddata->support_vsel = true;
+ host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line))
boarddata->delay_line = 0;
mmc_of_parse_voltage(np, &host->ocr_mask);
- /* sdr50 and sdr104 need work on 1.8v signal voltage */
- if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) &&
- !IS_ERR(imx_data->pins_default)) {
+ if (esdhc_is_usdhc(imx_data) && !IS_ERR(imx_data->pins_default)) {
imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
ESDHC_PINCTRL_STATE_100MHZ);
imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h
index 7daa78a2f342..640dec8b5b0c 100644
--- a/include/linux/platform_data/mmc-esdhc-imx.h
+++ b/include/linux/platform_data/mmc-esdhc-imx.h
@@ -34,7 +34,6 @@ enum cd_types {
* @cd_gpio: gpio for card_detect interrupt
* @wp_type: type of write_protect method (see wp_types enum above)
* @cd_type: type of card_detect method (see cd_types enum above)
- * @support_vsel: indicate it supports 1.8v switching
*/
struct esdhc_platform_data {
@@ -43,7 +42,6 @@ struct esdhc_platform_data {
enum wp_types wp_type;
enum cd_types cd_type;
int max_bus_width;
- bool support_vsel;
unsigned int delay_line;
unsigned int tuning_step; /* The delay cell steps in tuning procedure */
unsigned int tuning_start_tap; /* The start delay cell point in tuning procedure */
From patchwork Thu Jun 28 08:13:30 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [2/3] mmc: sdhci: add quirk to prevent higher speed modes
From: Stefan Agner <stefan@agner.ch>
X-Patchwork-Id: 10493273
Message-Id: <20180628081331.13051-3-stefan@agner.ch>
To: adrian.hunter@intel.com, ulf.hansson@linaro.org
Cc: fabio.estevam@nxp.com, haibo.chen@nxp.com, aisheng.dong@nxp.com,
michael@amarulasolutions.com, rmk+kernel@armlinux.org.uk,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
Stefan Agner <stefan@agner.ch>
Date: Thu, 28 Jun 2018 10:13:30 +0200
Some hosts are capable of running higher speed modes but do not
have the board support for it. Introduce a quirk which prevents
the stack from using modes running at 100MHz or faster.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
drivers/mmc/host/sdhci.c | 8 ++++++++
drivers/mmc/host/sdhci.h | 2 ++
2 files changed, 10 insertions(+)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 1c828e0e9905..8ac257dfaab3 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3749,6 +3749,14 @@ int sdhci_setup_host(struct sdhci_host *host)
}
}
+ if (host->quirks2 & SDHCI_QUIRK2_NO_UHS_HS200_HS400) {
+ host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
+ SDHCI_SUPPORT_DDR50);
+
+ mmc->caps2 &= ~(MMC_CAP2_HSX00_1_8V | MMC_CAP2_HSX00_1_2V |
+ MMC_CAP2_HS400_ES);
+ }
+
if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V) {
host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
SDHCI_SUPPORT_DDR50);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 23966f887da6..cb2433d6d61f 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -450,6 +450,8 @@ struct sdhci_host {
* obtainable timeout.
*/
#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17)
+/* Do not support any higher speeds (>50MHz) */
+#define SDHCI_QUIRK2_NO_UHS_HS200_HS400 (1<<18)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
Reference in New Issue View Git Blame Copy Permalink