kernel/kernel.spec
2013-05-08 11:19:38 -04:00

2930 lines
91 KiB
RPMSpec

# We have to override the new %%install behavior because, well... the kernel is special.
%global __spec_install_pre %{___build_pre}
Summary: The Linux kernel
# For a stable, released kernel, released_kernel should be 1. For rawhide
# and/or a kernel built from an rc or git snapshot, released_kernel should
# be 0.
%global released_kernel 0
# Sign modules on x86. Make sure the config files match this setting if more
# architectures are added.
%ifarch %{ix86} x86_64
%global signmodules 1
%else
%global signmodules 0
%endif
# Save original buildid for later if it's defined
%if 0%{?buildid:1}
%global orig_buildid %{buildid}
%undefine buildid
%endif
###################################################################
# Polite request for people who spin their own kernel rpms:
# please modify the "buildid" define in a way that identifies
# that the kernel isn't the stock distribution kernel, for example,
# by setting the define to ".local" or ".bz123456". This will be
# appended to the full kernel version.
#
# (Uncomment the '#' and both spaces below to set the buildid.)
#
# % define buildid .local
###################################################################
# The buildid can also be specified on the rpmbuild command line
# by adding --define="buildid .whatever". If both the specfile and
# the environment define a buildid they will be concatenated together.
%if 0%{?orig_buildid:1}
%if 0%{?buildid:1}
%global srpm_buildid %{buildid}
%define buildid %{srpm_buildid}%{orig_buildid}
%else
%define buildid %{orig_buildid}
%endif
%endif
# baserelease defines which build revision of this kernel version we're
# building. We used to call this fedora_build, but the magical name
# baserelease is matched by the rpmdev-bumpspec tool, which you should use.
#
# We used to have some extra magic weirdness to bump this automatically,
# but now we don't. Just use: rpmdev-bumpspec -c 'comment for changelog'
# When changing base_sublevel below or going from rc to a final kernel,
# reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec).
# scripts/rebase.sh should be made to do that for you, actually.
#
# NOTE: baserelease must be > 0 or bad things will happen if you switch
# to a released kernel (released version will be < rc version)
#
# For non-released -rc kernels, this will be appended after the rcX and
# gitX tags, so a 3 here would become part of release "0.rcX.gitX.3"
#
%global baserelease 1
%global fedora_build %{baserelease}
# base_sublevel is the kernel version we're starting with and patching
# on top of -- for example, 3.1-rc7-git1 starts with a 3.0 base,
# which yields a base_sublevel of 0.
%define base_sublevel 9
## If this is a released kernel ##
%if 0%{?released_kernel}
# Do we have a -stable update to apply?
%define stable_update 0
# Is it a -stable RC?
%define stable_rc 0
# Set rpm version accordingly
%if 0%{?stable_update}
%define stablerev %{stable_update}
%define stable_base %{stable_update}
%if 0%{?stable_rc}
# stable RCs are incremental patches, so we need the previous stable patch
%define stable_base %(echo $((%{stable_update} - 1)))
%endif
%endif
%define rpmversion 3.%{base_sublevel}.%{stable_update}
## The not-released-kernel case ##
%else
# The next upstream release sublevel (base_sublevel+1)
%define upstream_sublevel %(echo $((%{base_sublevel} + 1)))
# The rc snapshot level
%define rcrev 0
# The git snapshot level
%define gitrev 22
# Set rpm version accordingly
%define rpmversion 3.%{upstream_sublevel}.0
%endif
# Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below.
# What parts do we want to build? We must build at least one kernel.
# These are the kernels that are built IF the architecture allows it.
# All should default to 1 (enabled) and be flipped to 0 (disabled)
# by later arch-specific checks.
# The following build options are enabled by default.
# Use either --without <opt> in your rpmbuild command or force values
# to 0 in here to disable them.
#
# standard kernel
%define with_up %{?_without_up: 0} %{?!_without_up: 1}
# kernel-smp (only valid for ppc 32-bit)
%define with_smp %{?_without_smp: 0} %{?!_without_smp: 1}
# kernel-PAE (only valid for i686)
%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
# kernel-debug
%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
# kernel-doc
%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
# kernel-headers
%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
# perf
%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
# tools
%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
# kernel-debuginfo
%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
# kernel-bootwrapper (for creating zImages from kernel + initrd)
%define with_bootwrapper %{?_without_bootwrapper: 0} %{?!_without_bootwrapper: 1}
# Want to build a the vsdo directories installed
%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
# ARM Cortex-A15 support with LPAE and HW Virtualisation
%define with_lpae %{?_without_lpae: 0} %{?!_without_lpae: 1}
#
# Additional options for user-friendly one-off kernel building:
#
# Only build the base kernel (--with baseonly):
%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
# Only build the smp kernel (--with smponly):
%define with_smponly %{?_with_smponly: 1} %{?!_with_smponly: 0}
# Only build the pae kernel (--with paeonly):
%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
# Only build the debug kernel (--with dbgonly):
%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
#
# should we do C=1 builds with sparse
%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
#
# build a release kernel on rawhide
%define with_release %{?_with_release: 1} %{?!_with_release: 0}
# Set debugbuildsenabled to 1 for production (build separate debug kernels)
# and 0 for rawhide (all kernels are debug kernels).
# See also 'make debug' and 'make release'.
%define debugbuildsenabled 0
# Want to build a vanilla kernel build without any non-upstream patches?
%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
# Build the kernel-doc package, but don't fail the build if it botches.
# Here "true" means "continue" and "false" means "fail the build".
%if 0%{?released_kernel}
%define doc_build_fail false
%else
%define doc_build_fail true
%endif
%define rawhide_skip_docs 1
%if 0%{?rawhide_skip_docs}
%define with_doc 0
%define doc_build_fail true
%endif
# pkg_release is what we'll fill in for the rpm Release: field
%if 0%{?released_kernel}
%if 0%{?stable_rc}
%define stable_rctag .rc%{stable_rc}
%define pkg_release 0%{stable_rctag}.%{fedora_build}%{?buildid}%{?dist}
%else
%define pkg_release %{fedora_build}%{?buildid}%{?dist}
%endif
%else
# non-released_kernel
%if 0%{?rcrev}
%define rctag .rc%rcrev
%else
%define rctag .rc0
%endif
%if 0%{?gitrev}
%define gittag .git%gitrev
%else
%define gittag .git0
%endif
%define pkg_release 0%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist}
%endif
# The kernel tarball/base version
%define kversion 3.%{base_sublevel}
%define make_target bzImage
%define KVERREL %{version}-%{release}.%{_target_cpu}
%define hdrarch %_target_cpu
%define asmarch %_target_cpu
%if 0%{!?nopatches:1}
%define nopatches 0
%endif
%if %{with_vanilla}
%define nopatches 1
%endif
%if %{nopatches}
%define with_bootwrapper 0
%define variant -vanilla
%else
%define variant_fedora -fedora
%endif
%define using_upstream_branch 0
%if 0%{?upstream_branch:1}
%define stable_update 0
%define using_upstream_branch 1
%define variant -%{upstream_branch}%{?variant_fedora}
%define pkg_release 0.%{fedora_build}%{upstream_branch_tag}%{?buildid}%{?dist}
%endif
%if !%{debugbuildsenabled}
%define with_debug 0
%endif
%if !%{with_debuginfo}
%define _enable_debug_packages 0
%endif
%define debuginfodir /usr/lib/debug
# kernel-PAE is only built on i686.
%ifnarch i686
%define with_pae 0
%endif
# kernel up (unified kernel target), unified LPAE are only built on armv7 hfp
%ifnarch armv7hl
%define with_lpae 0
%endif
# if requested, only build base kernel
%if %{with_baseonly}
%define with_smp 0
%define with_pae 0
%define with_debug 0
%endif
# if requested, only build smp kernel
%if %{with_smponly}
%define with_up 0
%define with_pae 0
%define with_debug 0
%endif
# if requested, only build pae kernel
%if %{with_paeonly}
%define with_up 0
%define with_smp 0
%define with_debug 0
%endif
# if requested, only build debug kernel
%if %{with_dbgonly}
%if %{debugbuildsenabled}
%define with_up 0
%define with_pae 0
%endif
%define with_smp 0
%define with_pae 0
%define with_tools 0
%define with_perf 0
%endif
%define all_x86 i386 i686
%if %{with_vdso_install}
# These arches install vdso/ directories.
%define vdso_arches %{all_x86} x86_64 ppc ppc64 ppc64p7 s390 s390x
%endif
# Overrides for generic default options
# only ppc needs a separate smp kernel
%ifnarch ppc
%define with_smp 0
%endif
# don't do debug builds on anything but i686 and x86_64
%ifnarch i686 x86_64
%define with_debug 0
%endif
# only package docs noarch
%ifnarch noarch
%define with_doc 0
%endif
# don't build noarch kernels or headers (duh)
%ifarch noarch
%define with_up 0
%define with_headers 0
%define with_tools 0
%define with_perf 0
%define all_arch_configs kernel-%{version}-*.config
%endif
# bootwrapper is only on ppc
%ifnarch ppc ppc64 ppc64p7
%define with_bootwrapper 0
%endif
# sparse blows up on ppc64 and sparc64
%ifarch ppc64 ppc ppc64p7
%define with_sparse 0
%endif
# Per-arch tweaks
%ifarch %{all_x86}
%define asmarch x86
%define hdrarch i386
%define all_arch_configs kernel-%{version}-i?86*.config
%define image_install_path boot
%define kernel_image arch/x86/boot/bzImage
%endif
%ifarch x86_64
%define asmarch x86
%define all_arch_configs kernel-%{version}-x86_64*.config
%define image_install_path boot
%define kernel_image arch/x86/boot/bzImage
%endif
%ifarch ppc64 ppc64p7
%define asmarch powerpc
%define hdrarch powerpc
%define all_arch_configs kernel-%{version}-ppc64*.config
%define image_install_path boot
%define make_target vmlinux
%define kernel_image vmlinux
%define kernel_image_elf 1
%endif
%ifarch s390x
%define asmarch s390
%define hdrarch s390
%define all_arch_configs kernel-%{version}-s390x.config
%define image_install_path boot
%define make_target image
%define kernel_image arch/s390/boot/image
%define with_tools 0
%endif
%ifarch ppc
%define asmarch powerpc
%define hdrarch powerpc
%define all_arch_configs kernel-%{version}-ppc{-,.}*config
%define image_install_path boot
%define make_target vmlinux
%define kernel_image vmlinux
%define kernel_image_elf 1
%endif
%ifarch %{arm}
%define all_arch_configs kernel-%{version}-arm*.config
%define image_install_path boot
%define asmarch arm
%define hdrarch arm
%define make_target bzImage
%define kernel_image arch/arm/boot/zImage
# we only build headers/perf/tools on the base arm arches
# just like we used to only build them on i386 for x86
%ifnarch armv7hl
%define with_headers 0
%define with_perf 0
%define with_tools 0
%endif
%endif
# Should make listnewconfig fail if there's config options
# printed out?
%if %{nopatches}%{using_upstream_branch}
%define listnewconfig_fail 0
%else
%define listnewconfig_fail 1
%endif
# To temporarily exclude an architecture from being built, add it to
# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
# don't build kernel-headers then the new build system will no longer let
# us use the previous build of that package -- it'll just be completely AWOL.
# Which is a BadThing(tm).
# We only build kernel-headers on the following...
%define nobuildarches i386 s390
%ifarch %nobuildarches
%define with_up 0
%define with_smp 0
%define with_pae 0
%define with_debuginfo 0
%define with_perf 0
%define with_tools 0
%define _enable_debug_packages 0
%endif
%define with_pae_debug 0
%if %{with_pae}
%define with_pae_debug %{with_debug}
%endif
# Architectures we build tools/cpupower on
%define cpupowerarchs %{ix86} x86_64 ppc ppc64 ppc64p7 %{arm}
#
# Three sets of minimum package version requirements in the form of Conflicts:
# to versions below the minimum
#
#
# First the general kernel 2.6 required versions as per
# Documentation/Changes
#
%define kernel_dot_org_conflicts ppp < 2.4.3-3, isdn4k-utils < 3.2-32, nfs-utils < 1.2.5-7.fc17, e2fsprogs < 1.37-4, util-linux < 2.12, jfsutils < 1.1.7-2, reiserfs-utils < 3.6.19-2, xfsprogs < 2.6.13-4, procps < 3.2.5-6.3, oprofile < 0.9.1-2, device-mapper-libs < 1.02.63-2, mdadm < 3.2.1-5
#
# Then a series of requirements that are distribution specific, either
# because we add patches for something, or the older versions have
# problems with the newer kernel or lack certain things that make
# integration in the distro harder than needed.
#
%define package_conflicts initscripts < 7.23, udev < 063-6, iptables < 1.3.2-1, ipw2200-firmware < 2.4, iwl4965-firmware < 228.57.2, selinux-policy-targeted < 1.25.3-14, squashfs-tools < 4.0, wireless-tools < 29-3
# We moved the drm include files into kernel-headers, make sure there's
# a recent enough libdrm-devel on the system that doesn't have those.
%define kernel_headers_conflicts libdrm-devel < 2.4.0-0.15
#
# Packages that need to be installed before the kernel is, because the %%post
# scripts use them.
#
%define kernel_prereq fileutils, module-init-tools >= 3.16-4, initscripts >= 8.11.1-1, grubby >= 8.3-1
%define initrd_prereq dracut >= 001-7
#
# This macro does requires, provides, conflicts, obsoletes for a kernel package.
# %%kernel_reqprovconf <subpackage>
# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
# macros defined above.
#
%define kernel_reqprovconf \
Provides: kernel = %{rpmversion}-%{pkg_release}\
Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:.%{1}}\
Provides: kernel-drm = 4.3.0\
Provides: kernel-drm-nouveau = 16\
Provides: kernel-modeset = 1\
Provides: kernel-uname-r = %{KVERREL}%{?1:.%{1}}\
Provides: kernel-highbank\
Provides: kernel-highbank-uname-r = %{KVERREL}%{?1:.%{1}}\
Provides: kernel-omap\
Provides: kernel-omap-uname-r = %{KVERREL}%{?1:.%{1}}\
Requires(pre): %{kernel_prereq}\
Requires(pre): %{initrd_prereq}\
Requires(pre): linux-firmware >= 20120206-0.1.git06c8f81\
Requires(post): /sbin/new-kernel-pkg\
Requires(preun): /sbin/new-kernel-pkg\
Conflicts: %{kernel_dot_org_conflicts}\
Conflicts: %{package_conflicts}\
%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
# We can't let RPM do the dependencies automatic because it'll then pick up\
# a correct but undesirable perl dependency from the module headers which\
# isn't required for the kernel proper to function\
AutoReq: no\
AutoProv: yes\
%{nil}
Name: kernel%{?variant}
Group: System Environment/Kernel
License: GPLv2 and Redistributable, no modification permitted
URL: http://www.kernel.org/
Version: %{rpmversion}
Release: %{pkg_release}
# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
# SET %%nobuildarches (ABOVE) INSTEAD
ExclusiveArch: noarch %{all_x86} x86_64 ppc ppc64 ppc64p7 s390 s390x %{arm}
ExclusiveOS: Linux
%kernel_reqprovconf
#
# List the packages used during the kernel build
#
BuildRequires: module-init-tools, patch >= 2.5.4, bash >= 2.03, sh-utils, tar
BuildRequires: bzip2, xz, findutils, gzip, m4, perl, perl-Carp, make >= 3.78, diffutils, gawk
BuildRequires: gcc >= 3.4.2, binutils >= 2.12, redhat-rpm-config, hmaccalc
BuildRequires: net-tools, hostname, bc
BuildRequires: xmlto, asciidoc
%if %{with_sparse}
BuildRequires: sparse >= 0.4.1
%endif
%if %{with_perf}
BuildRequires: elfutils-devel zlib-devel binutils-devel newt-devel python-devel perl(ExtUtils::Embed) bison
BuildRequires: audit-libs-devel
%endif
%if %{with_tools}
BuildRequires: pciutils-devel gettext
%endif
BuildConflicts: rhbuildsys(DiskFree) < 500Mb
%if %{with_debuginfo}
# Fancy new debuginfo generation introduced in Fedora 8/RHEL 6.
# The -r flag to find-debuginfo.sh invokes eu-strip --reloc-debug-sections
# which reduces the number of relocations in kernel module .ko.debug files and
# was introduced with rpm 4.9 and elfutils 0.153.
BuildRequires: rpm-build >= 4.9.0-1, elfutils >= elfutils-0.153-1
%define debuginfo_args --strict-build-id -r
%endif
%if %{signmodules}
BuildRequires: openssl
BuildRequires: pesign >= 0.10-4
%endif
Source0: ftp://ftp.kernel.org/pub/linux/kernel/v3.0/linux-%{kversion}.tar.xz
%if %{signmodules}
Source11: x509.genkey
%endif
Source15: merge.pl
Source16: mod-extra.list
Source17: mod-extra.sh
Source18: mod-sign.sh
%define modsign_cmd %{SOURCE18}
Source19: Makefile.release
Source20: Makefile.config
Source21: config-debug
Source22: config-nodebug
Source23: config-generic
Source30: config-x86-generic
Source31: config-i686-PAE
Source32: config-x86-32-generic
Source40: config-x86_64-generic
Source50: config-powerpc-generic
Source51: config-powerpc32-generic
Source52: config-powerpc32-smp
Source53: config-powerpc64
Source54: config-powerpc64p7
Source70: config-s390x
# Unified ARM kernels
Source100: config-armv7-generic
Source101: config-armv7
Source102: config-armv7-lpae
# This file is intentionally left empty in the stock kernel. Its a nicety
# added for those wanting to do custom rebuilds with altered config opts.
Source1000: config-local
# Sources for kernel-tools
Source2000: cpupower.service
Source2001: cpupower.config
# Here should be only the patches up to the upstream canonical Linus tree.
# For a stable release kernel
%if 0%{?stable_update}
%if 0%{?stable_base}
%define stable_patch_00 patch-3.%{base_sublevel}.%{stable_base}.xz
Patch00: %{stable_patch_00}
%endif
%if 0%{?stable_rc}
%define stable_patch_01 patch-3.%{base_sublevel}.%{stable_update}-rc%{stable_rc}.xz
Patch01: %{stable_patch_01}
%endif
# non-released_kernel case
# These are automagically defined by the rcrev and gitrev values set up
# near the top of this spec file.
%else
%if 0%{?rcrev}
Patch00: patch-3.%{upstream_sublevel}-rc%{rcrev}.xz
%if 0%{?gitrev}
Patch01: patch-3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.xz
%endif
%else
# pre-{base_sublevel+1}-rc1 case
%if 0%{?gitrev}
Patch00: patch-3.%{base_sublevel}-git%{gitrev}.xz
%endif
%endif
%endif
%if %{using_upstream_branch}
### BRANCH PATCH ###
%endif
# we also need compile fixes for -vanilla
Patch04: compile-fixes.patch
# build tweak for build ID magic, even for -vanilla
Patch05: makefile-after_link.patch
%if !%{nopatches}
# revert upstream patches we get via other methods
Patch09: upstream-reverts.patch
# Git trees.
# Standalone patches
Patch100: taint-vbox.patch
Patch110: vmbugon-warnon.patch
#atch200: debug-bad-pte-dmi.patch
Patch201: debug-bad-pte-modules.patch
Patch390: defaults-acpi-video.patch
Patch391: acpi-video-dos.patch
Patch396: acpi-sony-nonvs-blacklist.patch
Patch450: input-kill-stupid-messages.patch
Patch452: no-pcspkr-modalias.patch
Patch460: serial-460800.patch
Patch470: die-floppy-die.patch
Patch510: silence-noise.patch
Patch530: silence-fbcon-logo.patch
Patch800: crash-driver.patch
# crypto/
# secure boot
Patch1000: devel-pekey-secure-boot-20130502.patch
# virt + ksm patches
# DRM
#atch1700: drm-edid-try-harder-to-fix-up-broken-headers.patch
#Patch1800: drm-vgem.patch
# nouveau + drm fixes
# intel drm is all merged upstream
Patch1824: drm-intel-next.patch
Patch1825: drm-i915-dp-stfu.patch
# Quiet boot fixes
# silence the ACPI blacklist code
Patch2802: silence-acpi-blacklist.patch
# media patches
Patch2899: v4l-dvb-fixes.patch
Patch2900: v4l-dvb-update.patch
Patch2901: v4l-dvb-experimental.patch
# fs fixes
# NFSv4
# patches headed upstream
Patch10000: fs-proc-devtree-remove_proc_entry.patch
Patch12016: disable-i8042-check-on-apple-mac.patch
Patch13003: efi-dont-map-boot-services-on-32bit.patch
Patch14000: hibernate-freeze-filesystems.patch
Patch14010: lis3-improve-handling-of-null-rate.patch
# ARM
Patch21000: arm-export-read_current_timer.patch
# https://lists.ozlabs.org/pipermail/devicetree-discuss/2013-March/029029.html
Patch21001: arm-of-dma.patch
# lpae
Patch21002: arm-lpae-ax88796.patch
# ARM omap
# ARM tegra
Patch21005: arm-tegra-usb-no-reset-linux33.patch
#atch21006: arm-tegra-fixclk.patch
#atch21007: arm-tegra-sdhci-module-fix.patch
#rhbz 754518
Patch21235: scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch
#rhbz 859485
Patch21226: vt-Drop-K_OFF-for-VC_MUTE.patch
# https://fedoraproject.org/wiki/Features/Checkpoint_Restore
Patch21242: criu-no-expert.patch
#rhbz 892811
Patch21247: ath9k_rx_dma_stop_check.patch
#rhbz 903192
Patch21261: 0001-kmsg-Honor-dmesg_restrict-sysctl-on-dev-kmsg.patch
Patch22000: weird-root-dentry-name-debug.patch
#selinux ptrace child permissions
Patch22001: selinux-apply-different-permission-to-ptrace-child.patch
#rhbz 927469
Patch23006: fix-child-thread-introspection.patch
Patch25014: blkcg-fix-scheduling-while-atomic-in-blk_queue_bypass_start.patch
# Fix i915 on Macbook Pro 10,2 machines
Patch25015: 0001-Revert-drm-i915-revert-eDP-bpp-clamping-code-changes.patch
Patch25016: tglx.patch
# END OF PATCH DEFINITIONS
%endif
BuildRoot: %{_tmppath}/kernel-%{KVERREL}-root
%description
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.
%package doc
Summary: Various documentation bits found in the kernel source
Group: Documentation
%description doc
This package contains documentation files from the kernel
source. Various bits of information about the Linux kernel and the
device drivers shipped with it are documented in these files.
You'll want to install this package if you need a reference to the
options that can be passed to Linux kernel modules at load time.
%package headers
Summary: Header files for the Linux kernel for use by glibc
Group: Development/System
Obsoletes: glibc-kernheaders < 3.0-46
Provides: glibc-kernheaders = 3.0-46
%description headers
Kernel-headers includes the C header files that specify the interface
between the Linux kernel and userspace libraries and programs. The
header files define structures and constants that are needed for
building most standard programs and are also needed for rebuilding the
glibc package.
%package bootwrapper
Summary: Boot wrapper files for generating combined kernel + initrd images
Group: Development/System
Requires: gzip binutils
%description bootwrapper
Kernel-bootwrapper contains the wrapper code which makes bootable "zImage"
files combining both kernel and initial ramdisk.
%package debuginfo-common-%{_target_cpu}
Summary: Kernel source files used by %{name}-debuginfo packages
Group: Development/Debug
%description debuginfo-common-%{_target_cpu}
This package is required by %{name}-debuginfo subpackages.
It provides the kernel source files common to all builds.
%if %{with_perf}
%package -n perf
Summary: Performance monitoring for the Linux kernel
Group: Development/System
License: GPLv2
%description -n perf
This package contains the perf tool, which enables performance monitoring
of the Linux kernel.
%package -n perf-debuginfo
Summary: Debug information for package perf
Group: Development/Debug
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n perf-debuginfo
This package provides debug information for the perf package.
# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|XXX' -o perf-debuginfo.list}
%package -n python-perf
Summary: Python bindings for apps which will manipulate perf events
Group: Development/Libraries
%description -n python-perf
The python-perf package contains a module that permits applications
written in the Python programming language to use the interface
to manipulate perf events.
%{!?python_sitearch: %global python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; print get_python_lib(1)")}
%package -n python-perf-debuginfo
Summary: Debug information for package perf python bindings
Group: Development/Debug
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n python-perf-debuginfo
This package provides debug information for the perf python bindings.
# the python_sitearch macro should already be defined from above
%{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{python_sitearch}/perf.so(\.debug)?|XXX' -o python-perf-debuginfo.list}
%endif # with_perf
%if %{with_tools}
%package -n kernel-tools
Summary: Assortment of tools for the Linux kernel
Group: Development/System
License: GPLv2
Provides: cpupowerutils = 1:009-0.6.p1
Obsoletes: cpupowerutils < 1:009-0.6.p1
Provides: cpufreq-utils = 1:009-0.6.p1
Provides: cpufrequtils = 1:009-0.6.p1
Obsoletes: cpufreq-utils < 1:009-0.6.p1
Obsoletes: cpufrequtils < 1:009-0.6.p1
Obsoletes: cpuspeed < 1:1.5-16
Requires: kernel-tools-libs = %{version}-%{release}
%description -n kernel-tools
This package contains the tools/ directory from the kernel source
and the supporting documentation.
%package -n kernel-tools-libs
Summary: Libraries for the kernels-tools
Group: Development/System
License: GPLv2
%description -n kernel-tools-libs
This package contains the libraries built from the tools/ directory
from the kernel source.
%package -n kernel-tools-libs-devel
Summary: Assortment of tools for the Linux kernel
Group: Development/System
License: GPLv2
Requires: kernel-tools = %{version}-%{release}
Provides: cpupowerutils-devel = 1:009-0.6.p1
Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
Requires: kernel-tools-libs = %{version}-%{release}
Provides: kernel-tools-devel
%description -n kernel-tools-libs-devel
This package contains the development files for the tools/ directory from
the kernel source.
%package -n kernel-tools-debuginfo
Summary: Debug information for package kernel-tools
Group: Development/Debug
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n kernel-tools-debuginfo
This package provides debug information for package kernel-tools.
# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
%endif # with_tools
#
# This macro creates a kernel-<subpackage>-debuginfo package.
# %%kernel_debuginfo_package <subpackage>
#
%define kernel_debuginfo_package() \
%package %{?1:%{1}-}debuginfo\
Summary: Debug information for package %{name}%{?1:-%{1}}\
Group: Development/Debug\
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
AutoReqProv: no\
%description -n %{name}%{?1:-%{1}}-debuginfo\
This package provides debug information for package %{name}%{?1:-%{1}}.\
This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
%{expand:%%global debuginfo_args %{?debuginfo_args} -p '/.*/%%{KVERREL}%{?1:\.%{1}}/.*|/.*%%{KVERREL}%{?1:\.%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
%{nil}
#
# This macro creates a kernel-<subpackage>-devel package.
# %%kernel_devel_package <subpackage> <pretty-name>
#
%define kernel_devel_package() \
%package %{?1:%{1}-}devel\
Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
Group: System Environment/Kernel\
Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:.%{1}}\
Provides: kernel-devel = %{version}-%{release}%{?1:.%{1}}\
Provides: kernel-devel-uname-r = %{KVERREL}%{?1:.%{1}}\
AutoReqProv: no\
Requires(pre): /usr/bin/find\
Requires: perl\
%description -n kernel%{?variant}%{?1:-%{1}}-devel\
This package provides kernel headers and makefiles sufficient to build modules\
against the %{?2:%{2} }kernel package.\
%{nil}
#
# This macro creates a kernel-<subpackage>-modules-extra package.
# %%kernel_modules-extra_package <subpackage> <pretty-name>
#
%define kernel_modules-extra_package() \
%package %{?1:%{1}-}modules-extra\
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
Group: System Environment/Kernel\
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:.%{1}}\
Provides: kernel-modules-extra = %{version}-%{release}%{?1:.%{1}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel-modules-extra-uname-r = %{KVERREL}%{?1:.%{1}}\
Requires: kernel-uname-r = %{KVERREL}%{?1:.%{1}}\
AutoReqProv: no\
%description -n kernel%{?variant}%{?1:-%{1}}-modules-extra\
This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
%{nil}
#
# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
# %%define variant_summary The Linux kernel compiled for <configuration>
# %%kernel_variant_package [-n <pretty-name>] <subpackage>
#
%define kernel_variant_package(n:) \
%package %1\
Summary: %{variant_summary}\
Group: System Environment/Kernel\
%kernel_reqprovconf\
%{expand:%%kernel_devel_package %1 %{!?-n:%1}%{?-n:%{-n*}}}\
%{expand:%%kernel_modules-extra_package %1 %{!?-n:%1}%{?-n:%{-n*}}}\
%{expand:%%kernel_debuginfo_package %1}\
%{nil}
# First the auxiliary packages of the main kernel package.
%kernel_devel_package
%kernel_modules-extra_package
%kernel_debuginfo_package
# Now, each variant package.
%define variant_summary The Linux kernel compiled for SMP machines
%kernel_variant_package -n SMP smp
%description smp
This package includes a SMP version of the Linux kernel. It is
required only on machines with two or more CPUs as well as machines with
hyperthreading technology.
Install the kernel-smp package if your machine uses two or more CPUs.
%define variant_summary The Linux kernel compiled for PAE capable machines
%kernel_variant_package PAE
%description PAE
This package includes a version of the Linux kernel with support for up to
64GB of high memory. It requires a CPU with Physical Address Extensions (PAE).
The non-PAE kernel can only address up to 4GB of memory.
Install the kernel-PAE package if your machine has more than 4GB of memory.
%define variant_summary The Linux kernel compiled with extra debugging enabled for PAE capable machines
%kernel_variant_package PAEdebug
Obsoletes: kernel-PAE-debug
%description PAEdebug
This package includes a version of the Linux kernel with support for up to
64GB of high memory. It requires a CPU with Physical Address Extensions (PAE).
The non-PAE kernel can only address up to 4GB of memory.
Install the kernel-PAE package if your machine has more than 4GB of memory.
This variant of the kernel has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.
%define variant_summary The Linux kernel compiled with extra debugging enabled
%kernel_variant_package debug
%description debug
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.
This variant of the kernel has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.
%define variant_summary The Linux kernel compiled for Cortex-A15
%kernel_variant_package lpae
%description lpae
This package includes a version of the Linux kernel with support for
Cortex-A15 devices with LPAE and HW virtualisation support
%prep
# do a few sanity-checks for --with *only builds
%if %{with_baseonly}
%if !%{with_up}%{with_pae}
echo "Cannot build --with baseonly, up build is disabled"
exit 1
%endif
%endif
%if %{with_smponly}
%if !%{with_smp}
echo "Cannot build --with smponly, smp build is disabled"
exit 1
%endif
%endif
%if "%{baserelease}" == "0"
echo "baserelease must be greater than zero"
exit 1
%endif
# more sanity checking; do it quietly
if [ "%{patches}" != "%%{patches}" ] ; then
for patch in %{patches} ; do
if [ ! -f $patch ] ; then
echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
exit 1
fi
done
fi 2>/dev/null
patch_command='patch -p1 -F1 -s'
ApplyPatch()
{
local patch=$1
shift
if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
exit 1
fi
%if !%{using_upstream_branch}
if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME%%%%%{?variant}}.spec ; then
if [ "${patch:0:8}" != "patch-3." ] ; then
echo "ERROR: Patch $patch not listed as a source patch in specfile"
exit 1
fi
fi 2>/dev/null
%endif
case "$patch" in
*.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
*.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
*.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
*) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
esac
}
# don't apply patch if it's empty
ApplyOptionalPatch()
{
local patch=$1
shift
if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
exit 1
fi
local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
if [ "$C" -gt 9 ]; then
ApplyPatch $patch ${1+"$@"}
fi
}
# First we unpack the kernel tarball.
# If this isn't the first make prep, we use links to the existing clean tarball
# which speeds things up quite a bit.
# Update to latest upstream.
%if 0%{?released_kernel}
%define vanillaversion 3.%{base_sublevel}
# non-released_kernel case
%else
%if 0%{?rcrev}
%define vanillaversion 3.%{upstream_sublevel}-rc%{rcrev}
%if 0%{?gitrev}
%define vanillaversion 3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}
%endif
%else
# pre-{base_sublevel+1}-rc1 case
%if 0%{?gitrev}
%define vanillaversion 3.%{base_sublevel}-git%{gitrev}
%else
%define vanillaversion 3.%{base_sublevel}
%endif
%endif
%endif
# %%{vanillaversion} : the full version name, e.g. 2.6.35-rc6-git3
# %%{kversion} : the base version, e.g. 2.6.34
# Use kernel-%%{kversion}%%{?dist} as the top-level directory name
# so we can prep different trees within a single git directory.
# Build a list of the other top-level kernel tree directories.
# This will be used to hardlink identical vanilla subdirs.
sharedirs=$(find "$PWD" -maxdepth 1 -type d -name 'kernel-3.*' \
| grep -x -v "$PWD"/kernel-%{kversion}%{?dist}) ||:
# Delete all old stale trees.
if [ -d kernel-%{kversion}%{?dist} ]; then
cd kernel-%{kversion}%{?dist}
for i in linux-*
do
if [ -d $i ]; then
# Just in case we ctrl-c'd a prep already
rm -rf deleteme.%{_target_cpu}
# Move away the stale away, and delete in background.
mv $i deleteme-$i
rm -rf deleteme* &
fi
done
cd ..
fi
# Generate new tree
if [ ! -d kernel-%{kversion}%{?dist}/vanilla-%{vanillaversion} ]; then
if [ -d kernel-%{kversion}%{?dist}/vanilla-%{kversion} ]; then
# The base vanilla version already exists.
cd kernel-%{kversion}%{?dist}
# Any vanilla-* directories other than the base one are stale.
for dir in vanilla-*; do
[ "$dir" = vanilla-%{kversion} ] || rm -rf $dir &
done
else
rm -f pax_global_header
# Look for an identical base vanilla dir that can be hardlinked.
for sharedir in $sharedirs ; do
if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then
break
fi
done
if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then
%setup -q -n kernel-%{kversion}%{?dist} -c -T
cp -rl $sharedir/vanilla-%{kversion} .
else
%setup -q -n kernel-%{kversion}%{?dist} -c
mv linux-%{kversion} vanilla-%{kversion}
fi
fi
%if "%{kversion}" != "%{vanillaversion}"
for sharedir in $sharedirs ; do
if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then
break
fi
done
if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then
cp -rl $sharedir/vanilla-%{vanillaversion} .
else
# Need to apply patches to the base vanilla version.
cp -rl vanilla-%{kversion} vanilla-%{vanillaversion}
cd vanilla-%{vanillaversion}
# Update vanilla to the latest upstream.
# (non-released_kernel case only)
%if 0%{?rcrev}
ApplyPatch patch-3.%{upstream_sublevel}-rc%{rcrev}.xz
%if 0%{?gitrev}
ApplyPatch patch-3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.xz
%endif
%else
# pre-{base_sublevel+1}-rc1 case
%if 0%{?gitrev}
ApplyPatch patch-3.%{base_sublevel}-git%{gitrev}.xz
%endif
%endif
cd ..
fi
%endif
else
# We already have all vanilla dirs, just change to the top-level directory.
cd kernel-%{kversion}%{?dist}
fi
# Now build the fedora kernel tree.
cp -rl vanilla-%{vanillaversion} linux-%{KVERREL}
cd linux-%{KVERREL}
# released_kernel with possible stable updates
%if 0%{?stable_base}
ApplyPatch %{stable_patch_00}
%endif
%if 0%{?stable_rc}
ApplyPatch %{stable_patch_01}
%endif
%if %{using_upstream_branch}
### BRANCH APPLY ###
%endif
# Drop some necessary files from the source dir into the buildroot
cp $RPM_SOURCE_DIR/config-* .
cp %{SOURCE15} .
%if !%{debugbuildsenabled}
%if %{with_release}
# The normal build is a really debug build and the user has explicitly requested
# a release kernel. Change the config files into non-debug versions.
make -f %{SOURCE19} config-release
%endif
%endif
# Dynamically generate kernel .config files from config-* files
make -f %{SOURCE20} VERSION=%{version} configs
# Merge in any user-provided local config option changes
%if %{?all_arch_configs:1}%{!?all_arch_configs:0}
for i in %{all_arch_configs}
do
mv $i $i.tmp
./merge.pl %{SOURCE1000} $i.tmp > $i
rm $i.tmp
done
%endif
ApplyPatch makefile-after_link.patch
#
# misc small stuff to make things compile
#
ApplyOptionalPatch compile-fixes.patch
%if !%{nopatches}
# revert patches from upstream that conflict or that we get via other means
ApplyOptionalPatch upstream-reverts.patch -R
ApplyPatch taint-vbox.patch
ApplyPatch vmbugon-warnon.patch
#plyPatch debug-bad-pte-dmi.patch
ApplyPatch debug-bad-pte-modules.patch
# Architecture patches
# x86(-64)
#
# ARM
#
ApplyPatch arm-export-read_current_timer.patch
ApplyPatch arm-of-dma.patch
ApplyPatch arm-lpae-ax88796.patch
ApplyPatch arm-tegra-usb-no-reset-linux33.patch
#pplyPatch arm-tegra-fixclk.patch
#pplyPatch arm-tegra-sdhci-module-fix.patch
#
# bugfixes to drivers and filesystems
#
# ext4
# xfs
# btrfs
# eCryptfs
# NFSv4
# USB
# WMI
# ACPI
ApplyPatch defaults-acpi-video.patch
ApplyPatch acpi-video-dos.patch
ApplyPatch acpi-sony-nonvs-blacklist.patch
#
# PCI
#
#
# SCSI Bits.
#
# ACPI
# ALSA
# Networking
# Misc fixes
# The input layer spews crap no-one cares about.
ApplyPatch input-kill-stupid-messages.patch
# stop floppy.ko from autoloading during udev...
ApplyPatch die-floppy-die.patch
ApplyPatch no-pcspkr-modalias.patch
# Allow to use 480600 baud on 16C950 UARTs
ApplyPatch serial-460800.patch
# Silence some useless messages that still get printed with 'quiet'
ApplyPatch silence-noise.patch
# Make fbcon not show the penguins with 'quiet'
ApplyPatch silence-fbcon-logo.patch
# Changes to upstream defaults.
# /dev/crash driver.
ApplyPatch crash-driver.patch
# crypto/
# secure boot
ApplyPatch devel-pekey-secure-boot-20130502.patch
# Assorted Virt Fixes
# DRM core
#ApplyPatch drm-edid-try-harder-to-fix-up-broken-headers.patch
#ApplyPatch drm-vgem.patch
# Nouveau DRM
# Intel DRM
ApplyOptionalPatch drm-intel-next.patch
ApplyPatch drm-i915-dp-stfu.patch
# silence the ACPI blacklist code
ApplyPatch silence-acpi-blacklist.patch
# V4L/DVB updates/fixes/experimental drivers
# apply if non-empty
ApplyOptionalPatch v4l-dvb-fixes.patch
ApplyOptionalPatch v4l-dvb-update.patch
ApplyOptionalPatch v4l-dvb-experimental.patch
# Patches headed upstream
ApplyPatch fs-proc-devtree-remove_proc_entry.patch
ApplyPatch disable-i8042-check-on-apple-mac.patch
ApplyPatch efi-dont-map-boot-services-on-32bit.patch
# FIXME: REBASE
#ApplyPatch hibernate-freeze-filesystems.patch
ApplyPatch lis3-improve-handling-of-null-rate.patch
#rhbz 754518
ApplyPatch scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch
ApplyPatch weird-root-dentry-name-debug.patch
#selinux ptrace child permissions
ApplyPatch selinux-apply-different-permission-to-ptrace-child.patch
#rhbz 859485
ApplyPatch vt-Drop-K_OFF-for-VC_MUTE.patch
# https://fedoraproject.org/wiki/Features/Checkpoint_Restore
ApplyPatch criu-no-expert.patch
#rhbz 892811
ApplyPatch ath9k_rx_dma_stop_check.patch
#rhbz 903192
ApplyPatch 0001-kmsg-Honor-dmesg_restrict-sysctl-on-dev-kmsg.patch
#rhbz 927469
ApplyPatch fix-child-thread-introspection.patch
ApplyPatch blkcg-fix-scheduling-while-atomic-in-blk_queue_bypass_start.patch
# Fix i915 on Macbook Pro 10,2 machines
ApplyPatch 0001-Revert-drm-i915-revert-eDP-bpp-clamping-code-changes.patch
ApplyPatch tglx.patch
# END OF PATCH APPLICATIONS
%endif
# Any further pre-build tree manipulations happen here.
chmod +x scripts/checkpatch.pl
# This Prevents scripts/setlocalversion from mucking with our version numbers.
touch .scmversion
# only deal with configs if we are going to build for the arch
%ifnarch %nobuildarches
mkdir configs
%if !%{debugbuildsenabled}
rm -f kernel-%{version}-*debug.config
%endif
# now run oldconfig over all the config files
for i in *.config
do
mv $i .config
Arch=`head -1 .config | cut -b 3-`
make ARCH=$Arch listnewconfig | grep -E '^CONFIG_' >.newoptions || true
%if %{listnewconfig_fail}
if [ -s .newoptions ]; then
cat .newoptions
exit 1
fi
%endif
rm -f .newoptions
make ARCH=$Arch oldnoconfig
echo "# $Arch" > configs/$i
cat .config >> configs/$i
done
# end of kernel config
%endif
# get rid of unwanted files resulting from patch fuzz
find . \( -name "*.orig" -o -name "*~" \) -exec rm -f {} \; >/dev/null
# remove unnecessary SCM files
find . -name .gitignore -exec rm -f {} \; >/dev/null
cd ..
###
### build
###
%build
%if %{with_sparse}
%define sparse_mflags C=1
%endif
%if %{with_debuginfo}
# This override tweaks the kernel makefiles so that we run debugedit on an
# object before embedding it. When we later run find-debuginfo.sh, it will
# run debugedit again. The edits it does change the build ID bits embedded
# in the stripped object, but repeating debugedit is a no-op. We do it
# beforehand to get the proper final build ID bits into the embedded image.
# This affects the vDSO images in vmlinux, and the vmlinux image in bzImage.
export AFTER_LINK=\
'sh -xc "/usr/lib/rpm/debugedit -b $$RPM_BUILD_DIR -d /usr/src/debug \
-i $@ > $@.id"'
%endif
cp_vmlinux()
{
eu-strip --remove-comment -o "$2" "$1"
}
BuildKernel() {
MakeTarget=$1
KernelImage=$2
Flavour=$3
Flav=${Flavour:+.${Flavour}}
InstallName=${4:-vmlinuz}
# Pick the right config file for the kernel we're building
Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config
DevelDir=/usr/src/kernels/%{KVERREL}${Flav}
# When the bootable image is just the ELF kernel, strip it.
# We already copy the unstripped file into the debuginfo package.
if [ "$KernelImage" = vmlinux ]; then
CopyKernel=cp_vmlinux
else
CopyKernel=cp
fi
KernelVer=%{version}-%{release}.%{_target_cpu}${Flav}
echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}...
%if 0%{?stable_update}
# make sure SUBLEVEL is incremented on a stable release. Sigh 3.x.
perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{?stablerev}/" Makefile
%endif
# make sure EXTRAVERSION says what we want it to say
perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -%{release}.%{_target_cpu}${Flav}/" Makefile
# if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
%if !0%{?rcrev}
%if 0%{?gitrev}
perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{upstream_sublevel}/' Makefile
%endif
%endif
# and now to start the build process
make -s mrproper
cp configs/$Config .config
%if %{signmodules}
cp %{SOURCE11} .
%endif
chmod +x scripts/sign-file
Arch=`head -1 .config | cut -b 3-`
echo USING ARCH=$Arch
make -s ARCH=$Arch oldnoconfig >/dev/null
%ifarch %{arm}
# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
make -s ARCH=$Arch V=1 %{?_smp_mflags} $MakeTarget %{?sparse_mflags} KALLSYMS_EXTRA_PASS=1
make -s ARCH=$Arch V=1 dtbs
mkdir -p $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
install -m 644 arch/arm/boot/dts/*.dtb $RPM_BUILD_ROOT/boot/dtb-$KernelVer/
rm -f arch/arm/boot/dts/*.dtb
%else
make -s ARCH=$Arch V=1 %{?_smp_mflags} $MakeTarget %{?sparse_mflags}
%endif
make -s ARCH=$Arch V=1 %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
# Start installing the results
%if %{with_debuginfo}
mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/boot
mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
%endif
mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
# We estimate the size of the initramfs because rpm needs to take this size
# into consideration when performing disk space calculations. (See bz #530778)
dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
if [ -f arch/$Arch/boot/zImage.stub ]; then
cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
fi
%if %{signmodules}
# Sign the image if we're using EFI
%pesign -s -i $KernelImage -o vmlinuz.signed
mv vmlinuz.signed $KernelImage
%endif
$CopyKernel $KernelImage \
$RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
# hmac sign the kernel for FIPS
echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
sha512hmac $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer | sed -e "s,$RPM_BUILD_ROOT,," > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
# Override $(mod-fw) because we don't want it to install any firmware
# we'll get it from the linux-firmware package and we don't want conflicts
make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=$KernelVer mod-fw=
%ifarch %{vdso_arches}
make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
if [ ! -s ldconfig-kernel.conf ]; then
echo > ldconfig-kernel.conf "\
# Placeholder file, no vDSO hwcap entries used in this kernel."
fi
%{__install} -D -m 444 ldconfig-kernel.conf \
$RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
%endif
# And save the headers/makefiles etc for building modules against
#
# This all looks scary, but the end result is supposed to be:
# * all arch relevant include/ files
# * all Makefile/Kconfig files
# * all script/ files
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
(cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
# dirs for additional modules per module-init-tools, kbuild/modules.txt
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
# first copy everything
cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
if [ -s Module.markers ]; then
cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
fi
# then drop all but the needed Makefiles/Kconfig files
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Documentation
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
if [ -d arch/$Arch/scripts ]; then
cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
fi
if [ -f arch/$Arch/*lds ]; then
cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
fi
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o
%ifarch ppc ppc64 ppc64p7
cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
if [ -d arch/%{asmarch}/include ]; then
cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
fi
# include the machine specific headers for ARM variants, if available.
%ifarch %{arm}
if [ -d arch/%{asmarch}/mach-${Flavour}/include ]; then
cp -a --parents arch/%{asmarch}/mach-${Flavour}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
fi
%endif
cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
# Make sure the Makefile and version.h have a matching timestamp so that
# external modules can be built
touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h
# Copy .config to include/config/auto.conf so "make prepare" is unnecessary.
cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
%if %{with_debuginfo}
if test -s vmlinux.id; then
cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
else
echo >&2 "*** ERROR *** no vmlinux build ID! ***"
exit 1
fi
#
# save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
#
mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
%endif
find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
# mark modules executable so that strip-to-file can strip them
xargs --no-run-if-empty chmod u+x < modnames
# Generate a list of modules for block and networking.
grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
collect_modules_list()
{
sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
}
collect_modules_list networking \
'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
collect_modules_list block \
'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size'
collect_modules_list drm \
'drm_open|drm_init'
collect_modules_list modesetting \
'drm_crtc_init'
# detect missing or incorrect license tags
rm -f modinfo
while read i
do
echo -n "${i#$RPM_BUILD_ROOT/lib/modules/$KernelVer/} " >> modinfo
/sbin/modinfo -l $i >> modinfo
done < modnames
grep -E -v \
'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' \
modinfo && exit 1
rm -f modinfo modnames
# Call the modules-extra script to move things around
%{SOURCE17} $RPM_BUILD_ROOT/lib/modules/$KernelVer %{SOURCE16}
%if %{signmodules}
# Save the signing keys so we can sign the modules in __modsign_install_post
cp signing_key.priv signing_key.priv.sign${Flav}
cp signing_key.x509 signing_key.x509.sign${Flav}
%endif
# remove files that will be auto generated by depmod at rpm -i time
for i in alias alias.bin builtin.bin ccwmap dep dep.bin ieee1394map inputmap isapnpmap ofmap pcimap seriomap symbols symbols.bin usbmap devname softdep
do
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$i
done
# Move the devel headers out of the root file system
mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
# This is going to create a broken link during the build, but we don't use
# it after this point. We need the link to actually point to something
# when kernel-devel is installed, and a relative link doesn't work across
# the F17 UsrMove feature.
ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
# prune junk from kernel-devel
find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -exec rm -f {} \;
}
###
# DO it...
###
# prepare directories
rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT/boot
mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
cd linux-%{KVERREL}
%if %{with_debug}
BuildKernel %make_target %kernel_image debug
%endif
%if %{with_pae_debug}
BuildKernel %make_target %kernel_image PAEdebug
%endif
%if %{with_pae}
BuildKernel %make_target %kernel_image PAE
%endif
%if %{with_lpae}
BuildKernel %make_target %kernel_image lpae
%endif
%if %{with_up}
BuildKernel %make_target %kernel_image
%endif
%if %{with_smp}
BuildKernel %make_target %kernel_image smp
%endif
%global perf_make \
make %{?_smp_mflags} -C tools/perf -s V=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_LIBNUMA=1 NO_STRLCPY=1 prefix=%{_prefix}
%if %{with_perf}
# perf
%{perf_make} all
%{perf_make} man || %{doc_build_fail}
%endif
%if %{with_tools}
%ifarch %{cpupowerarchs}
# cpupower
# make sure version-gen.sh is executable.
chmod +x tools/power/cpupower/utils/version-gen.sh
make %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false
%ifarch %{ix86}
pushd tools/power/cpupower/debug/i386
make %{?_smp_mflags} centrino-decode powernow-k8-decode
popd
%endif
%ifarch x86_64
pushd tools/power/cpupower/debug/x86_64
make %{?_smp_mflags} centrino-decode powernow-k8-decode
popd
%endif
%ifarch %{ix86} x86_64
pushd tools/power/x86/x86_energy_perf_policy/
make
popd
pushd tools/power/x86/turbostat
make
popd
%endif #turbostat/x86_energy_perf_policy
%endif
%endif
%if %{with_doc}
# Make the HTML and man pages.
make htmldocs mandocs || %{doc_build_fail}
# sometimes non-world-readable files sneak into the kernel source tree
chmod -R a=rX Documentation
find Documentation -type d | xargs chmod u+w
%endif
# In the modsign case, we do 3 things. 1) We check the "flavour" and hard
# code the value in the following invocations. This is somewhat sub-optimal
# but we're doing this inside of an RPM macro and it isn't as easy as it
# could be because of that. 2) We restore the .tmp_versions/ directory from
# the one we saved off in BuildKernel above. This is to make sure we're
# signing the modules we actually built/installed in that flavour. 3) We
# grab the arch and invoke mod-sign.sh command to actually sign the modules.
#
# We have to do all of those things _after_ find-debuginfo runs, otherwise
# that will strip the signature off of the modules.
%define __modsign_install_post \
if [ "%{signmodules}" -eq "1" ]; then \
if [ "%{with_pae}" -ne "0" ]; then \
%{modsign_cmd} signing_key.priv.sign.PAE signing_key.x509.sign.PAE $RPM_BUILD_ROOT/lib/modules/%{KVERREL}.PAE/ \
fi \
if [ "%{with_debug}" -ne "0" ]; then \
%{modsign_cmd} signing_key.priv.sign.debug signing_key.x509.sign.debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}.debug/ \
fi \
if [ "%{with_pae_debug}" -ne "0" ]; then \
%{modsign_cmd} signing_key.priv.sign.PAEdebug signing_key.x509.sign.PAEdebug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}.PAEdebug/ \
fi \
if [ "%{with_up}" -ne "0" ]; then \
%{modsign_cmd} signing_key.priv.sign signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
fi \
fi \
%{nil}
###
### Special hacks for debuginfo subpackages.
###
# This macro is used by %%install, so we must redefine it before that.
%define debug_package %{nil}
%if %{with_debuginfo}
%define __debug_install_post \
/usr/lib/rpm/find-debuginfo.sh %{debuginfo_args} %{_builddir}/%{?buildsubdir}\
%{nil}
%ifnarch noarch
%global __debug_package 1
%files -f debugfiles.list debuginfo-common-%{_target_cpu}
%defattr(-,root,root)
%endif
%endif
#
# Disgusting hack alert! We need to ensure we sign modules *after* all
# invocations of strip occur, which is in __debug_install_post if
# find-debuginfo.sh runs, and __os_install_post if not.
#
%define __spec_install_post \
%{?__debug_package:%{__debug_install_post}}\
%{__arch_install_post}\
%{__os_install_post}\
%{__modsign_install_post}
###
### install
###
%install
cd linux-%{KVERREL}
%if %{with_doc}
docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{rpmversion}
man9dir=$RPM_BUILD_ROOT%{_datadir}/man/man9
# copy the source over
mkdir -p $docdir
tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
# Install man pages for the kernel API.
mkdir -p $man9dir
find Documentation/DocBook/man -name '*.9.gz' -print0 |
xargs -0 --no-run-if-empty %{__install} -m 444 -t $man9dir $m
ls $man9dir | grep -q '' || > $man9dir/BROKEN
%endif # with_doc
# We have to do the headers install before the tools install because the
# kernel headers_install will remove any header files in /usr/include that
# it doesn't install itself.
%if %{with_headers}
# Install kernel headers
make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
# Do headers_check but don't die if it fails.
make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_check \
> hdrwarnings.txt || :
if grep -q exist hdrwarnings.txt; then
sed s:^$RPM_BUILD_ROOT/usr/include/:: hdrwarnings.txt
# Temporarily cause a build failure if header inconsistencies.
# exit 1
fi
find $RPM_BUILD_ROOT/usr/include \
\( -name .install -o -name .check -o \
-name ..install.cmd -o -name ..check.cmd \) | xargs rm -f
%endif
%if %{with_perf}
# perf tool binary and supporting scripts/binaries
%{perf_make} DESTDIR=$RPM_BUILD_ROOT install
# python-perf extension
%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
# perf man pages (note: implicit rpm magic compresses them later)
%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man || %{doc_build_fail}
%endif
%if %{with_tools}
%ifarch %{cpupowerarchs}
make -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
rm -f %{buildroot}%{_libdir}/*.{a,la}
%find_lang cpupower
mv cpupower.lang ../
%ifarch %{ix86}
pushd tools/power/cpupower/debug/i386
install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
popd
%endif
%ifarch x86_64
pushd tools/power/cpupower/debug/x86_64
install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
popd
%endif
chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
%endif
%ifarch %{ix86} x86_64
mkdir -p %{buildroot}%{_mandir}/man8
pushd tools/power/x86/x86_energy_perf_policy
make DESTDIR=%{buildroot} install
popd
pushd tools/power/x86/turbostat
make DESTDIR=%{buildroot} install
popd
%endif #turbostat/x86_energy_perf_policy
%endif
%if %{with_bootwrapper}
make DESTDIR=$RPM_BUILD_ROOT bootwrapper_install WRAPPER_OBJDIR=%{_libdir}/kernel-wrapper WRAPPER_DTSDIR=%{_libdir}/kernel-wrapper/dts
%endif
###
### clean
###
%clean
rm -rf $RPM_BUILD_ROOT
###
### scripts
###
%if %{with_tools}
%post -n kernel-tools
/sbin/ldconfig
%postun -n kernel-tools
/sbin/ldconfig
%endif
#
# This macro defines a %%post script for a kernel*-devel package.
# %%kernel_devel_post [<subpackage>]
#
%define kernel_devel_post() \
%{expand:%%post %{?1:%{1}-}devel}\
if [ -f /etc/sysconfig/kernel ]\
then\
. /etc/sysconfig/kernel || exit $?\
fi\
if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink ]\
then\
(cd /usr/src/kernels/%{KVERREL}%{?1:.%{1}} &&\
/usr/bin/find . -type f | while read f; do\
hardlink -c /usr/src/kernels/*.fc*.*/$f $f\
done)\
fi\
%{nil}
#
# This macro defines a %%post script for a kernel*-modules-extra package.
# %%kernel_modules-extra_post [<subpackage>]
#
%define kernel_modules_extra_post() \
%{expand:%%post %{?1:%{1}-}modules-extra}\
/sbin/depmod -a %{KVERREL}%{?1:.%{1}}\
%{nil}
# This macro defines a %%posttrans script for a kernel package.
# %%kernel_variant_posttrans [<subpackage>]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_posttrans() \
%{expand:%%posttrans %{?1}}\
/sbin/new-kernel-pkg --package kernel%{?-v:-%{-v*}} --mkinitrd --dracut --depmod --update %{KVERREL}%{?-v:.%{-v*}} || exit $?\
/sbin/new-kernel-pkg --package kernel%{?1:-%{1}} --rpmposttrans %{KVERREL}%{?1:.%{1}} || exit $?\
%{nil}
#
# This macro defines a %%post script for a kernel package and its devel package.
# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_post(v:r:) \
%{expand:%%kernel_devel_post %{?-v*}}\
%{expand:%%kernel_modules_extra_post %{?-v*}}\
%{expand:%%kernel_variant_posttrans %{?-v*}}\
%{expand:%%post %{?-v*}}\
%{-r:\
if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
[ -f /etc/sysconfig/kernel ]; then\
/bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
fi}\
%{expand:\
/sbin/new-kernel-pkg --package kernel%{?-v:-%{-v*}} --install %{KVERREL}%{?-v:.%{-v*}} || exit $?\
}\
%{nil}
#
# This macro defines a %%preun script for a kernel package.
# %%kernel_variant_preun <subpackage>
#
%define kernel_variant_preun() \
%{expand:%%preun %{?1}}\
/sbin/new-kernel-pkg --rminitrd --rmmoddep --remove %{KVERREL}%{?1:.%{1}} || exit $?\
%{nil}
%kernel_variant_preun
%kernel_variant_post -r kernel-smp
%kernel_variant_preun smp
%kernel_variant_post -v smp
%kernel_variant_preun PAE
%kernel_variant_post -v PAE -r (kernel|kernel-smp)
%kernel_variant_preun debug
%kernel_variant_post -v debug
%kernel_variant_post -v PAEdebug -r (kernel|kernel-smp)
%kernel_variant_preun PAEdebug
%kernel_variant_preun lpae
%kernel_variant_post -v lpae
if [ -x /sbin/ldconfig ]
then
/sbin/ldconfig -X || exit $?
fi
###
### file lists
###
%if %{with_headers}
%files headers
%defattr(-,root,root)
/usr/include/*
%endif
%if %{with_bootwrapper}
%files bootwrapper
%defattr(-,root,root)
/usr/sbin/*
%{_libdir}/kernel-wrapper
%endif
# only some architecture builds need kernel-doc
%if %{with_doc}
%files doc
%defattr(-,root,root)
%{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation/*
%dir %{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation
%dir %{_datadir}/doc/kernel-doc-%{rpmversion}
%{_datadir}/man/man9/*
%endif
%if %{with_perf}
%files -n perf
%defattr(-,root,root)
%{_bindir}/perf
%dir %{_libexecdir}/perf-core
%{_libexecdir}/perf-core/*
%{_mandir}/man[1-8]/perf*
%{_sysconfdir}/bash_completion.d/perf
%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
%files -n python-perf
%defattr(-,root,root)
%{python_sitearch}
%if %{with_debuginfo}
%files -f perf-debuginfo.list -n perf-debuginfo
%defattr(-,root,root)
%files -f python-perf-debuginfo.list -n python-perf-debuginfo
%defattr(-,root,root)
%endif
%endif # with_perf
%if %{with_tools}
%files -n kernel-tools -f cpupower.lang
%defattr(-,root,root)
%ifarch %{cpupowerarchs}
%{_bindir}/cpupower
%ifarch %{ix86} x86_64
%{_bindir}/centrino-decode
%{_bindir}/powernow-k8-decode
%endif
%{_unitdir}/cpupower.service
%{_mandir}/man[1-8]/cpupower*
%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
%ifarch %{ix86} x86_64
%{_bindir}/x86_energy_perf_policy
%{_mandir}/man8/x86_energy_perf_policy*
%{_bindir}/turbostat
%{_mandir}/man8/turbostat*
%endif
%endif
%if %{with_debuginfo}
%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
%defattr(-,root,root)
%endif
%ifarch %{cpupowerarchs}
%files -n kernel-tools-libs
%{_libdir}/libcpupower.so.0
%{_libdir}/libcpupower.so.0.0.0
%files -n kernel-tools-libs-devel
%{_libdir}/libcpupower.so
%{_includedir}/cpufreq.h
%endif
%endif # with_perf
# This is %%{image_install_path} on an arch where that includes ELF files,
# or empty otherwise.
%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
#
# This macro defines the %%files sections for a kernel package
# and its devel and debuginfo packages.
# %%kernel_variant_files [-k vmlinux] <condition> <subpackage>
#
%define kernel_variant_files(k:) \
%if %{1}\
%{expand:%%files %{?2}}\
%defattr(-,root,root)\
/%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?2:.%{2}}\
/%{image_install_path}/.vmlinuz-%{KVERREL}%{?2:.%{2}}.hmac \
%ifarch %{arm}\
/%{image_install_path}/dtb-%{KVERREL}%{?2:.%{2}} \
%endif\
%attr(600,root,root) /boot/System.map-%{KVERREL}%{?2:.%{2}}\
/boot/config-%{KVERREL}%{?2:.%{2}}\
%dir /lib/modules/%{KVERREL}%{?2:.%{2}}\
/lib/modules/%{KVERREL}%{?2:.%{2}}/kernel\
/lib/modules/%{KVERREL}%{?2:.%{2}}/build\
/lib/modules/%{KVERREL}%{?2:.%{2}}/source\
/lib/modules/%{KVERREL}%{?2:.%{2}}/updates\
%ifarch %{vdso_arches}\
/lib/modules/%{KVERREL}%{?2:.%{2}}/vdso\
/etc/ld.so.conf.d/kernel-%{KVERREL}%{?2:.%{2}}.conf\
%endif\
/lib/modules/%{KVERREL}%{?2:.%{2}}/modules.*\
%ghost /boot/initramfs-%{KVERREL}%{?2:.%{2}}.img\
%{expand:%%files %{?2:%{2}-}devel}\
%defattr(-,root,root)\
/usr/src/kernels/%{KVERREL}%{?2:.%{2}}\
%{expand:%%files %{?2:%{2}-}modules-extra}\
%defattr(-,root,root)\
/lib/modules/%{KVERREL}%{?2:.%{2}}/extra\
%if %{with_debuginfo}\
%ifnarch noarch\
%{expand:%%files -f debuginfo%{?2}.list %{?2:%{2}-}debuginfo}\
%defattr(-,root,root)\
%endif\
%endif\
%endif\
%{nil}
%kernel_variant_files %{with_up}
%kernel_variant_files %{with_smp} smp
%kernel_variant_files %{with_debug} debug
%kernel_variant_files %{with_pae} PAE
%kernel_variant_files %{with_pae_debug} PAEdebug
%kernel_variant_files %{with_lpae} lpae
# plz don't put in a version string unless you're going to tag
# and build.
# ___________________________________________________________
# / This branch is for Fedora 20. You probably want to commit \
# \ to the F-19 branch instead, or in addition to this one. /
# -----------------------------------------------------------
# \ ^__^
# \ (@@)\_______
# (__)\ )\/\
# ||----w |
# || ||
%changelog
* Wed May 08 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git22.1
- Linux v3.9-11572-g5af43c2
* Tue May 07 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git21.1
- Linux v3.9-11485-gbb9055b
* Tue May 07 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git20.1
- Linux v3.9-10996-g0f47c94
* Tue May 07 2013 Josh Boyer <jwboyer@redhat.com>
- Fix dmesg_restrict patch to avoid regression (rhbz 952655)
* Mon May 06 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git19.1
- Linux v3.9-10936-g51a26ae
* Mon May 6 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Enable TPS65217 (am33xx) and EC on ChromeOS devices
* Mon May 06 2013 Josh Boyer <jwboyer@redhat.com>
- Don't remove headers explicitly exported via UAPI (rhbz 959467)
* Mon May 06 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git18.1
- Linux v3.9-10518-gd7ab730
* Mon May 06 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git17.1
- Linux v3.9-10104-g1aaf6d3
* Sun May 5 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Update ARM config
* Sat May 04 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git16.1
- Linux v3.9-9472-g1db7722
* Fri May 03 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git15.1
- Linux v3.9-9409-g8665218
* Fri May 03 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git14.1
- Linux v3.9-8933-gce85722
* Fri May 3 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- ARM 3.10 merge and general cleanup
- Drop dedicated tegra kernel as now Multiplatform enabled
- Enable Tegra and UX500 (Snowball) in Multiplatform
* Thu May 02 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git13.1
- Linux v3.9-8153-g5a148af
* Thu May 02 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git12.1
- Linux v3.9-7992-g99c6bcf
* Thu May 02 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git11.1
- Linux v3.9-7391-g20b4fb4
* Wed May 01 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git10.1
- Linux v3.9-5308-g8a72f38
* Wed May 01 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git9.1
- Linux v3.9-5293-g823e75f
* Wed May 1 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Minor ARM updates
* Wed May 01 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git8.1
- Linux v3.9-5165-g5f56886
* Tue Apr 30 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git7.1
- Linux v3.9-4597-g8c55f14
* Tue Apr 30 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Enable CONFIG_SERIAL_8250_DW on ARM
* Tue Apr 30 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git6.1
- Linux v3.9-4516-gc9ef713
* Tue Apr 30 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git5.1
- Linux v3.9-3520-g5a5a1bf
* Tue Apr 30 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git4.1
- Linux v3.9-3143-g56847d8
* Mon Apr 29 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git3.1
- Linux v3.9-2154-gec25e24
* Mon Apr 29 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git2.1
- Linux v3.9-332-g92ddcf4
* Mon Apr 29 2013 Josh Boyer <jwboyer@redhat.com> - 3.10.0-0.rc0.git1.1
- Linux v3.9-84-g916bb6d7
- Reenable debugging options.
* Mon Apr 29 2013 Neil Horman <nhorman@redhat.com>
- Enable CONFIG_PACKET_DIAG (rhbz 956870)
* Mon Apr 29 2013 Josh Boyer <jwboyer@redhat.com>
- Linux v3.9
* Fri Apr 26 2013 Josh Boyer <jwboyer@redhat.com>
- Add patch to prevent scheduling while atomic error in blkcg
* Wed Apr 24 2013 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix EFI boot on Macs (rhbz 953447)
* Mon Apr 22 2013 Justin M. Forbes <jforbes@redhat.com> - 3.9.0-0.rc8.git0.1
- Linux v3.9-rc8
- Disable debugging options.
* Mon Apr 22 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Minor ARM updates
* Fri Apr 19 2013 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix RCU splat from perf events
* Fri Apr 19 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Temporaily disable cpu idle on ARM as it appears to be causing stability issues
* Fri Apr 19 2013 Josh Boyer <jwboyer@redhat.com>
- Disable Intel HDA and enable RSXX block dev on ppc64/ppc64p7
* Thu Apr 18 2013 Justin M. Forbes <jforbes@redhat.com> - 3.9.0-0.rc7.git3.1
- Linux v3.9-rc7-70-gd202f05
* Wed Apr 17 2013 Justin M. Forbes <jforbes@redhat.com> - 3.9.0-0.rc7.git2.1
- Linux v3.9-rc7-24-g542a672
* Wed Apr 17 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Minor ARM config updates
- Add patch for DT DMA issues that affect at least highbank/tegra ARM devices
* Tue Apr 16 2013 Justin M. Forbes <jforbes@redhat.com> - 3.9.0-0.rc7.git1.1
- Linux v3.9-rc7-4-gbb33db7
- Reenable debugging options.
* Tue Apr 16 2013 Josh Boyer <jwboyer@redhat.com>
- Fix uninitialized variable free in iwlwifi (rhbz 951241)
- Fix race in regulatory code (rhbz 919176)
* Mon Apr 15 2013 Josh Boyer <jwboyer@redhat.com>
- Fix debug patches to build on s390x/ppc
* Mon Apr 15 2013 Justin M. Forbes <jforbes@redhat.com> - 3.9.0-0.rc7.git0.1
- Linux v3.9-rc7
- Disable debugging options.
* Fri Apr 12 2013 Josh Boyer <jwboyer@redhat.com>
- Enable CONFIG_LDM_PARTITION (rhbz 948636)
* Fri Apr 12 2013 Justin M. Forbes <jforbes@redhat.com>
- Fix forcedeth DMA check error (rhbz 928024)
* Thu Apr 11 2013 Dave Jones <davej@redhat.com>
- Print out some extra debug information when we hit bad page tables.
* Thu Apr 11 2013 Justin M. Forbes <jforbes@redhat.com> - 3.9.0-0.rc6.git2.1
- Linux v3.9-rc6-115-g7ee32a6
- libsas: use right function to alloc smp response (rhbz 949875)
* Tue Apr 09 2013 Justin M. Forbes <jforbes@redhat.com> - 3.9.0-0.rc6.git1.1
- Linux v3.9-rc6-36-ge8f2b54
- Reenable debugging options.
* Tue Apr 9 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Add patch to fix building some ARM tegra modules
- Some minor ARM OMAP updates
* Mon Apr 08 2013 Neil Horman <nhorman@redhat.com>
- Fix dma unmap error in e100 (rhbz 907694)
* Mon Apr 08 2013 Justin M. Forbes <jforbes@redhat.com> - 3.9.0-0.rc6.git0.1
- Disable debugging options.
- Linux-3.9-rc6
* Thu Apr 04 2013 Justin M. Forbes <jforbes@redhat.com> - 3.9.0-0.rc5.git3.1
- Linux v3.9-rc5-183-g22d1e6f
* Wed Apr 03 2013 Dave Jones <davej@redhat.com>
- Enable MTD_CHAR/MTD_BLOCK (Needed for SFC)
Enable 10gigE on 64-bit only.
* Wed Apr 03 2013 Justin M. Forbes <jforbes@redhat.com> - 3.9.0-0.rc5.git2.1
- Linux v3.9-rc5-146-gda241ef
* Wed Apr 3 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Add upstream usb-next OMAP patch to fix usb on omap/mvebu
* Tue Apr 02 2013 Josh Boyer <jwboyer@redhat.com>
- Enable CONFIG_FB_MATROX_G on powerpc
* Tue Apr 02 2013 Justin M. Forbes <jforbes@redhat.com> - 3.9.0-0.rc5.git1.1
- Linux v3.9-rc5-108-g118c9a4
- Reenable debugging options.
* Tue Apr 02 2013 Josh Boyer <jwboyer@redhat.com>
- Enable CONFIG_SCSI_DMX3191D (rhbz 919874)
* Mon Apr 01 2013 Josh Boyer <jwboyer@redhat.com>
- Enable CONFIG_MCE_INJECT (rhbz 927353)
* Mon Apr 01 2013 Justin M. Forbes <jforbes@redhat.com> - 3.9.0-0.rc5.git0.1
- Disable debugging options.
- Linux v3.9-rc5
- fix htmldoc build for 8250 rename. Patch from Kyle McMartin
* Mon Apr 1 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Minor ARM LPAE updates
* Sun Mar 31 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Make tegra inherit armv7-generic, fix and re-enable tegra
- Enable SPI on ARM
- Drop config-arm-generic
- ARM config updates
* Thu Mar 28 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Update ARM unified config for OMAP
* Tue Mar 26 2013 Justin M. Forbes <jforbes@redhat.com>
- Fix child thread introspection of of /proc/self/exe (rhbz 927469)
* Tue Mar 26 2013 Dave Jones <davej@redhat.com>
- Enable CONFIG_DM_CACHE (rhbz 924325)
* Tue Mar 26 2013 Josh Boyer <jwboyer@redhat.com>
- Add quirk for Realtek card reader to avoid 10 sec boot delay (rhbz 806587)
- Add quirk for MSI keyboard backlight to avoid 10 sec boot delay (rhbz 907221)
* Mon Mar 25 2013 Justin M. Forbes <jforbes@redhat.com>
- disable whci-hcd since it doesnt seem to have users (rhbz 919289)
* Sun Mar 24 2013 Dave Jones <davej@redhat.com> -3.9.0-0.rc4.git0.1
- Linux 3.9-rc4
merged: drm-i915-bounds-check-execbuffer-relocation-count.patch
* Sun Mar 24 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Update ARM config for OMAP/mvebu/lpae
* Fri Mar 22 2013 Dave Jones <davej@redhat.com>
- Fix calculation of current frequency in intel_pstate driver. (rhbz 923942)
- Add missing build-req for perl-Carp
* Thu Mar 21 2013 Josh Boyer <jwboyer@redhat.com>
- Fix workqueue crash in mac80211 (rhbz 920218)
* Thu Mar 21 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc3.git1.1
- Linux v3.9-rc3-148-g2ffdd7e
- Fixes CVE-2013-1796, CVE-2013-1797, CVE-2013-1798 in kvm.
* Wed Mar 20 2013 Dave Jones <davej@redhat.com>
- Enable CONFIG_DM_DELAY (rhbz 923721)
* Tue Mar 19 2013 Dave Jones <davej@redhat.com> - 3.9.0-0.rc3.git0.5
- Reenable debugging options.
* Tue Mar 19 2013 Dave Jones <davej@redhat.com>
- cpufreq/intel_pstate: Add function to check that all MSR's are valid (rhbz 922923)
* Mon Mar 18 2013 Dave Jones <davej@redhat.com> - 3.9.0-0.rc3.git0.4
- s390x config option changes from Dan Horák <dan@danny.cz>
- enable PCI
- disable few useless drivers
- disable drivers conflicting with s390x
* Mon Mar 18 2013 Dave Jones <davej@redhat.com> - 3.9.0-0.rc3.git0.3
- Linux v3.9-rc3
merged: w1-fix-oops-when-w1_search-is-called-from.patch
- Disable debugging options.
* Sun Mar 17 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Merge OMAP support into ARM unified kernel
- Add ARM LPAE kernel for Cortex A-15 devices that support LPAE and HW virtualisation
- Unified ARM kernel provides highbank and OMAP support
- Drop remantents of ARM softfp kernels
* Fri Mar 15 2013 Josh Boyer <jwboyer@redhat.com>
- Fix divide by zero on host TSC calibration failure (rhbz 859282)
* Fri Mar 15 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc2.git1.1
- Linux v3.9-rc2-292-ga2362d2
- Fixes CVE-2013-1860 kernel: usb: cdc-wdm buffer overflow triggered by device
* Thu Mar 14 2013 Dave Jones <davej@redhat.com>
- Move cpufreq drivers to be modular (rhbz 746372)
* Wed Mar 13 2013 Dave Jones <davej@redhat.com> - 3.9.0-0.rc2.git0.3
- Reenable debugging options.
* Tue Mar 12 2013 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix ieee80211_do_stop (rhbz 892599)
- Add patches to fix cfg80211 issues with suspend (rhbz 856863)
- CVE-2013-0913 drm/i915: head writing overflow (rhbz 920471 920529)
- CVE-2013-0914 sa_restorer information leak (rhbz 920499 920510)
* Tue Mar 12 2013 Dave Airlie <airlied@redhat.com>
- add QXL driver (f19 only)
* Mon Mar 11 2013 Dave Jones <davej@redhat.com> - 3.9.0-0.rc2.git0.2
- Disable debugging options.
* Mon Mar 11 2013 Dave Jones <davej@redhat.com>
- Linux 3.9-rc2
* Mon Mar 11 2013 Josh Boyer <jwboyer@redhat.com>
- Add patch to allow "8250." prefix to keep working (rhbz 911771)
- Add patch to fix w1_search oops (rhbz 857954)
* Sun Mar 10 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc1.git2.1
- Linux v3.9-rc1-278-g8343bce
* Sun Mar 10 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Enable Xilinx Zynq
- Enable highbank cpufreq driver
* Fri Mar 08 2013 Josh Boyer <jwboyer@redhat.com>
- Add turbostat and x86_engery_perf_policy debuginfo to kernel-tools-debuginfo
* Fri Mar 08 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc1.git1.1
- Linux v3.9-rc1-211-g47b3bc9
- Reenable debugging options.
- CVE-2013-1828 sctp: SCTP_GET_ASSOC_STATS stack buffer overflow (rhbz 919315 919316)
* Thu Mar 07 2013 Josh Boyer <jwboyer@redhat.com>
- CVE-2013-1792 keys: race condition in install_user_keyrings (rhbz 916646 919021)
* Wed Mar 06 2013 Josh Boyer <jwboyer@redhat.com>
- Adjust secure-boot patchset to work with boot_params sanitizing
- Don't clear efi_info in boot_params (rhbz 918408)
* Wed Mar 06 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Update ARM mvebu config
* Wed Mar 06 2013 Dave Jones <davej@redhat.com>
- drop acpi debugging patch.
* Wed Mar 06 2013 Justin M. Forbes <jforbes@redhat.com>
- Remove Ricoh multifunction DMAR patch as it's no longer needed (rhbz 880051)
* Tue Mar 05 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc1.git0.3
- Fix intel_pstate init error path (rhbz 916833)
* Tue Mar 5 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Temporarily disable tegra until we get a fix from upstream
* Tue Mar 05 2013 Josh Boyer <jwboyer@redhat.com>
- Add 3 fixes for efi issues (rhbz 917984)
- Enable CONFIG_IP6_NF_TARGET_MASQUERADE
* Mon Mar 04 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc1.git0.1
- Linux v3.9-rc1
- Add patch from Dirk Brandewie to fix intel pstate divide error (rhbz 916833)
- Disable debugging options.
* Mon Mar 4 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Update vexpress and omap options (fix MMC on qemu, hopefully fix OMAP3)
* Sun Mar 03 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git15.1
- Linux v3.8-10734-ga7c1120
* Fri Mar 01 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git14.1
- Linux v3.8-10206-gb0af9cd
* Fri Mar 01 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git13.1
- Linux v3.8-9761-gde1a226
* Thu Feb 28 2013 Kyle McMartin <kmcmarti@redhat.com>
- Make iso9660 a module.
* Thu Feb 28 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git12.1
- Linux v3.8-9633-g2a7d2b9
* Wed Feb 27 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Drop ARM kirkwood kernel
- Enable SPI on ARM
- General 3.9 updates
* Wed Feb 27 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git11.1
- Linux v3.8-9456-g309667e
* Wed Feb 27 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git10.1
- Linux v3.8-9405-gd895cb1
* Tue Feb 26 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git9.1
- Linux v3.8-9165-g1cef935
* Tue Feb 26 2013 Kyle McMartin <kmcmarti@redhat.com>
- Move VMXNET3 to config-x86-generic from config-generic, it's VMware
virtual ethernet.
* Tue Feb 26 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git8.1
- Linux v3.8-8664-gc41b381
* Tue Feb 26 2013 Kyle McMartin <kmcmarti@redhat.com>
- Add blk_queue_physical_block_size and register_netdevice to the symbols
used for initrd generation (synched from .el6)
- ipr.ko driven SAS VRAID cards found on x86_64 machines these days, and not
just on ppc64
* Tue Feb 26 2013 Josh Boyer <jwboyer@redhat.com>
- Fix vmalloc_fault oops during lazy MMU (rhbz 914737)
* Mon Feb 25 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git7.1
- Honor dmesg_restrict for /dev/kmsg (rhbz 903192)
- Linux v3.8-7888-gab78265
* Sun Feb 24 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git6.1
- Linux v3.8-6988-g9e2d59a
* Sun Feb 24 2013 Josh Boyer <jwboyer@redhat.com>
- CVE-2013-1763 sock_diag: out-of-bounds access to sock_diag_handlers (rhbz 915052,915057)
* Fri Feb 22 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git5.1
- Linux v3.8-6071-g8b5628a
* Fri Feb 22 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git4.1
- Linux v3.8-6071-g8b5628a
- Enable the rtl8192e driver (rhbz 913753)
* Thu Feb 21 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git3.1
- Linux v3.8-3195-g024e4ec
- Shut up perf about missing build things we don't care about
- Drop the old aic7xxx driver, from Paul Bolle
* Thu Feb 21 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git2.1
- Linux v3.8-3040-ga0b1c42
* Thu Feb 21 2013 Josh Boyer <jwboyer@redhat.com> - 3.9.0-0.rc0.git1.1
- Linux v3.8-523-gece8e0b
- Reenable debugging options.
* Tue Feb 19 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-2
- Add pekey support from David Howells and rework secure-boot patchset on top
- Add support for Atheros 04ca:3004 bluetooth devices (rhbz 844750)
- Backport support for newer ALPS touchpads (rhbz 812111)
- Enable CONFIG_AUDIT_LOGINUID_IMMUTABLE
* Tue Feb 19 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-1
- Linux v3.8
- Fix build with CONFIG_EFI disabled, reported by Peter Bowey (rhbz 911833)
- Disable debugging options.
* Mon Feb 18 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-0.rc7.git4.1
- Linux v3.8-rc7-93-gf741656
* Thu Feb 14 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-0.rc7.git3.1
- Linux v3.8-rc7-73-g323a72d
* Thu Feb 14 2013 Josh Boyer <jwboyer@redhat.com>
- Add patch to fix corruption on newer M6116 SATA bridges (rhbz 909591)
- CVE-2013-0228 xen: xen_iret() invalid %ds local DoS (rhbz 910848 906309)
* Wed Feb 13 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Disable tegra30
* Wed Feb 13 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-0.rc7.git2.1
- Linux v3.8-rc7-32-gecf223f
* Tue Feb 12 2013 Josh Boyer <jwboyer@redhat.com>
- Add patch to create a convenient mount point for pstore (rhbz 910126)
* Tue Feb 12 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-0.rc7.git1.1
- Linux v3.8-rc7-6-g211b0cd
- Reenable debugging options.
* Mon Feb 11 2013 Josh Boyer <jwboyer@redhat.com>
- Add patch from Kees Cook to restrict MSR writting in secure boot mode
- Build PATA_MACIO in on powerpc (rhbz 831361)
* Fri Feb 08 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-0.rc7.git0.1
- Linux v3.8-rc7
- Add patch to fix atomic sleep issue on alloc_pid failure (rhbz 894623)
- Disable debugging options.
* Thu Feb 7 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Minor ARM build fixes
* Wed Feb 06 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-0.rc6.git3.3
- Enable CONFIG_NAMESPACES everywhere (rhbz 907576)
- Add patch to fix ath9k dma stop checks (rhbz 892811)
* Wed Feb 06 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-0.rc6.git3.1
- Linux v3.8-rc6-98-g1589a3e
- Add patch to honor MokSBState (rhbz 907406)
* Tue Feb 05 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-0.rc6.git2.1
- Linux v3.8-rc6-62-gfe547d7
- Enable CONFIG_DRM_VMWGFX_FBCON (rhbz 907620)
- Enable CONFIG_DETECT_HUNG_TASK
* Mon Feb 04 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-0.rc6.git1.1
- Linux v3.8-rc6-22-g6edacf0
- Enable CONFIG_EXT4_DEBUG
- Fix rtlwifi scheduling while atomic from Larry Finger (rhbz 903881)
* Fri Feb 01 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-0.rc6.git0.1
- Linux v3.8-rc6
- Enable CONFIG_DMA_API_DEBUG
- Add patches to improve mac80211 latency and throughput (rhbz 830151)
* Thu Jan 31 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-0.rc5.git3.1
- Linux v3.8-rc5-245-g04c2eee
- Enable CONFIG_DEBUG_STACK_USAGE
* Wed Jan 30 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-0.rc5.git2.1
- Linux v3.8-rc5-218-ga56e160
- Enable NAMESPACES and CHECKPOINT_RESTORE on x86_64 for F19 CRIU feature
- Enable CONFIG_DEBUG_ATOMIC_SLEEP
* Tue Jan 29 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-0.rc5.git1.1
- Linux v3.8-rc5-150-g6abb7c2
* Tue Jan 29 2013 Josh Boyer <jwboyer@redhat.com>
- Backport driver for Cypress PS/2 trackpad (rhbz 799564)
* Mon Jan 28 2013 Josh Boyer <jwboyer@redhat.com> - 3.8.0-0.rc5.git0.1
- Linux v3.8-rc5
- Add patches to fix issues with iwlwifi (rhbz 863424)
- Enable CONFIG_PROVE_RCU
* Sun Jan 27 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Reenable perf on ARM (was suppose to be temporary)
- Build and package dtbs on ARM
- Enable FB options for qemu vexpress on unified
* Fri Jan 25 2013 Kyle McMartin <kmcmarti@redhat.com>
- Sign all modules with the mod-extra-sign.sh script, ensures nothing gets
missed because of .config differences between invocations of BuildKernel.
* Fri Jan 25 2013 Justin M. Forbes <jforbes@redhat.com>
- Turn off THP for 32bit
* Fri Jan 25 2013 Justin M. Forbes <jforbes@redhat.com> - 3.8.0-0.rc4.git5.1
- Linux v3.8-rc4-277-g66e2d3e
- Enable slub debug
* Thu Jan 24 2013 Josh Boyer <jwboyer@redhat.com>
- Update secure-boot patchset
* Thu Jan 24 2013 Justin M. Forbes <jforbes@redhat.com> - 3.8.0-0.rc4.git4.1
- Linux v3.8-rc4-183-gff7532c
- Enable lockdep
* Wed Jan 23 2013 Justin M. Forbes <jforbes@redhat.com> - 3.8.0-0.rc4.git3.1
- Linux v3.8-rc4-139-g1d85490
- Enable debug spinlocks
* Wed Jan 23 2013 Dave Jones <davej@redhat.com>
- Remove warnings about empty IPI masks.
* Sun Jan 20 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Remove obsolete ARM configs
- Update OMAP config for TI AM35XX SoCs
- Add patch to fix versatile build failure
* Sat Jan 19 2013 Justin M. Forbes <jforbes@redhat.com> - 3.8.0-0.rc4.git1.1
- Linux v3.8-rc4-42-g5da1f88
* Fri Jan 18 2013 Justin M. Forbes <jforbes@redhat.com> - 3.8.0-0.rc4.git0.1
- Linux v3.8-rc4
- Disable debugging options.
* Fri Jan 18 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Disable problematic PL310 ARM errata
- Minor ARM config tweaks
- OMAP DRM driver to fix OMAP kernel build
* Wed Jan 16 2013 Josh Boyer <jwboyer@redhat.com>
- Fix power management sysfs on non-secure boot machines (rhbz 896243)
* Wed Jan 16 2013 Dave Jones <davej@redhat.com>
- Experiment: Double the length of the brcmsmac transmit timeout.
* Wed Jan 16 2013 Josh Boyer <jwboyer@redhat.com>
- Add patch from Stanislaw Gruszka to fix iwlegacy IBSS cleanup (rhbz 886946)
* Tue Jan 15 2013 Justin M. Forbes <jforbes@redhat.com> - 3.8.0-0.rc3.git2.1
- Linux v3.8-rc3-293-g406089d
* Tue Jan 15 2013 Josh Boyer <jwboyer@redhat.com>
- Enable CONFIG_DVB_USB_V2 (rhbz 895460)
* Mon Jan 14 2013 Josh Boyer <jwboyer@redhat.com>
- Enable Orinoco drivers in kernel-modules-extra (rhbz 894069)
* Mon Jan 14 2013 Justin M. Forbes <jforbes@redhat.com> - 3.8.0-0.rc3.git1.1
- Linux v3.8-rc3-74-gb719f43
* Fri Jan 11 2013 Josh Boyer <jwboyer@redhat.com>
- Update secure-boot patchset
* Thu Jan 10 2013 Justin M. Forbes <jforbes@redhat.com> - 3.8.0-0.rc3.git0.2
- Reenable debugging options.
* Thu Jan 10 2013 Dave Jones <davej@redhat.com>
- Drop old Montevina era E1000 workaround.
* Thu Jan 10 2013 Justin M. Forbes <jforbes@redhat.com> - 3.8.0-0.rc3.git0.1
- Linux v3.8-rc3
- Disable debugging options.
* Wed Jan 09 2013 Justin M. Forbes <jforbes@redhat.com> - 3.8.0-0.rc2.git4.1
- Linux v3.8-rc2-370-g57a0c1e
* Wed Jan 9 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Update ARM mvebu config
* Wed Jan 09 2013 Josh Boyer <jwboyer@redhat.com>
- Enable CONFIG_CIFS_DEBUG as it was on before it was split out
* Tue Jan 08 2013 Kyle McMartin <kmcmarti@redhat.com>
- Ensure modules are signed even if *-debuginfo rpms are not produced by
re-defining __spec_install_post and adding a hook after all strip
invocations. Ideally, in the future, we could patch the rpm macro and
remove the re-define from kernel.spec, but that's another windmill to tilt
at.
* Tue Jan 08 2013 Justin M. Forbes <jforbes@redhat.com> - 3.8.0-0.rc2.git3.1
- Linux v3.8-rc2-222-g2a893f9
* Mon Jan 07 2013 Justin M. Forbes <jforbes@redhat.com> - 3.8.0-0.rc2.git2.1
- Linux v3.8-rc2-191-gd287b87
- remove the namei-include.patch, it's upstream now
* Mon Jan 07 2013 Justin M. Forbes <jforbes@redhat.com> - 3.8.0-0.rc2.git1.2
- Reenable debugging options.
* Mon Jan 7 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Further ARM config updates
- Add patch to fix building omapdrm
* Mon Jan 07 2013 Justin M. Forbes <jforbes@redhat.com>
- Bye sparc
* Mon Jan 07 2013 Justin M. Forbes <jforbes@redhat.com>
- Fix up configs for build
* Mon Jan 07 2013 Josh Boyer <jwboyer@redhat.com>
- Patch to fix efivarfs underflow from Lingzhu Xiang (rhbz 888163)
* Sat Jan 5 2013 Peter Robinson <pbrobinson@fedoraproject.org>
- Initial update of ARM configs for 3.8
- Enable DRM driver for tegra
- Drop separate imx kernel. Will be reintroduced soon in unified
* Fri Jan 04 2013 Justin M. Forbes <jforbes@redhat.com> - 3.8.0-0.rc2.git1.1
- Linux v3.8-rc2-116-g5f243b9
* Thu Jan 03 2013 Justin M. Forbes <jforbes@redhat.com>
- Initial 3.8-rc2 rebase
* Wed Jan 02 2013 Josh Boyer <jwboyer@redhat.com>
- BR the hostname package (rhbz 886113)
* Tue Dec 18 2012 Dave Jones <davej@redhat.com>
- On rebases, list new config options.
(Revert to pre-18 behaviour)
* Mon Dec 17 2012 Josh Boyer <jwboyer@redhat.com>
- Fix oops in sony-laptop setup (rhbz 873107)
* Fri Dec 14 2012 Peter Robinson <pbrobinson@fedoraproject.org>
- Add patch to fix arm imx drm driver build
* Wed Dec 12 2012 Josh Boyer <jwboyer@redhat.com>
- Fix infinite loop in efi signature parser
- Don't error out if db doesn't exist
* Tue Dec 11 2012 Peter Robinson <pbrobinson@fedoraproject.org>
- Update ARM configs for latest 3.7
- Drop highbank kernel build variant as its in unified kernel
* Tue Dec 11 2012 Josh Boyer <jwboyer@redhat.com>
- Update secure boot patches to include MoK support
- Fix IBSS scanning in mac80211 (rhbz 883414)
* Tue Dec 11 2012 Dave Jones <davej@redhat.com> - 3.7.0-2
- Reenable debugging options.
* Tue Dec 11 2012 Dave Jones <davej@redhat.com> - 3.7.0-1
- Linux v3.7
###
# The following Emacs magic makes C-c C-e use UTC dates.
# Local Variables:
# rpm-change-log-uses-utc: t
# End:
###