kernel/antenna_select.patch

228 lines
9.6 KiB
Diff

From c18d8f5095715c56bb3cd9cba64242542632054b Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Wed, 16 Mar 2016 13:33:34 -0500
Subject: rtlwifi: rtl8723be: Add antenna select module parameter
A number of new laptops have been delivered with only a single antenna.
In principle, this is OK; however, a problem arises when the on-board
EEPROM is programmed to use the other antenna connection. The option
of opening the computer and moving the connector is not always possible
as it will void the warranty in some cases. In addition, this solution
breaks the Windows driver when the box dual boots Linux and Windows.
A fix involving a new module parameter has been developed. This commit
adds the new parameter and implements the changes needed for the driver.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [V4.0+]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c | 5 +++++
drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c | 3 +++
drivers/net/wireless/realtek/rtlwifi/wifi.h | 3 +++
3 files changed, 11 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
index c983d2f..5a3df91 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
@@ -2684,6 +2684,7 @@ void rtl8723be_read_bt_coexist_info_from_hwpg(struct ieee80211_hw *hw,
bool auto_load_fail, u8 *hwinfo)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mod_params *mod_params = rtlpriv->cfg->mod_params;
u8 value;
u32 tmpu_32;
@@ -2702,6 +2703,10 @@ void rtl8723be_read_bt_coexist_info_from_hwpg(struct ieee80211_hw *hw,
rtlpriv->btcoexist.btc_info.ant_num = ANT_X2;
}
+ /* override ant_num / ant_path */
+ if (mod_params->ant_sel)
+ rtlpriv->btcoexist.btc_info.ant_num =
+ (mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1);
}
void rtl8723be_bt_reg_init(struct ieee80211_hw *hw)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
index a78eaed..2101793 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
@@ -273,6 +273,7 @@ static struct rtl_mod_params rtl8723be_mod_params = {
.msi_support = false,
.disable_watchdog = false,
.debug = DBG_EMERG,
+ .ant_sel = 0,
};
static struct rtl_hal_cfg rtl8723be_hal_cfg = {
@@ -394,6 +395,7 @@ module_param_named(fwlps, rtl8723be_mod_params.fwctrl_lps, bool, 0444);
module_param_named(msi, rtl8723be_mod_params.msi_support, bool, 0444);
module_param_named(disable_watchdog, rtl8723be_mod_params.disable_watchdog,
bool, 0444);
+module_param_named(ant_sel, rtl8723be_mod_params.ant_sel, int, 0444);
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
@@ -402,6 +404,7 @@ MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 0)\n");
MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(disable_watchdog,
"Set to 1 to disable the watchdog (default 0)\n");
+MODULE_PARM_DESC(ant_sel, "Set to 1 or 2 to force antenna number (default 0)\n");
static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
diff --git a/drivers/net/wireless/realtek/rtlwifi/wifi.h b/drivers/net/wireless/realtek/rtlwifi/wifi.h
index 554d814..93bd7fc 100644
--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h
+++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h
@@ -2246,6 +2246,9 @@ struct rtl_mod_params {
/* default 0: 1 means do not disable interrupts */
bool int_clear;
+
+ /* select antenna */
+ int ant_sel;
};
struct rtl_hal_usbint_cfg {
--
cgit v0.12
From baa1702290953295e421f0f433e2b1ff4815827c Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Wed, 16 Mar 2016 13:33:35 -0500
Subject: rtlwifi: btcoexist: Implement antenna selection
The previous patch added an option to rtl8723be to manually select the
antenna for those cases when only a single antenna is present, and the
on-board EEPROM is incorrectly programmed. This patch implements the
necessary changes in the Bluetooth coexistence driver.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [V4.0+]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
.../realtek/rtlwifi/btcoexist/halbtc8723b2ant.c | 9 ++++++--
.../realtek/rtlwifi/btcoexist/halbtcoutsrc.c | 27 +++++++++++++++++++++-
.../realtek/rtlwifi/btcoexist/halbtcoutsrc.h | 2 +-
.../wireless/realtek/rtlwifi/btcoexist/rtl_btc.c | 5 +++-
4 files changed, 38 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c
index c43ab59..77cbd10 100644
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c
@@ -1203,7 +1203,6 @@ static void btc8723b2ant_set_ant_path(struct btc_coexist *btcoexist,
/* Force GNT_BT to low */
btcoexist->btc_write_1byte_bitmask(btcoexist, 0x765, 0x18, 0x0);
- btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT) {
/* tell firmware "no antenna inverse" */
@@ -1211,19 +1210,25 @@ static void btc8723b2ant_set_ant_path(struct btc_coexist *btcoexist,
h2c_parameter[1] = 1; /* ext switch type */
btcoexist->btc_fill_h2c(btcoexist, 0x65, 2,
h2c_parameter);
+ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
} else {
/* tell firmware "antenna inverse" */
h2c_parameter[0] = 1;
h2c_parameter[1] = 1; /* ext switch type */
btcoexist->btc_fill_h2c(btcoexist, 0x65, 2,
h2c_parameter);
+ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280);
}
}
/* ext switch setting */
if (use_ext_switch) {
/* fixed internal switch S1->WiFi, S0->BT */
- btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
+ if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT)
+ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
+ else
+ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280);
+
switch (antpos_type) {
case BTC_ANT_WIFI_AT_MAIN:
/* ext switch main at wifi */
diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
index b2791c8..babd149 100644
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
@@ -965,13 +965,38 @@ void exhalbtc_set_chip_type(u8 chip_type)
}
}
-void exhalbtc_set_ant_num(u8 type, u8 ant_num)
+void exhalbtc_set_ant_num(struct rtl_priv *rtlpriv, u8 type, u8 ant_num)
{
if (BT_COEX_ANT_TYPE_PG == type) {
gl_bt_coexist.board_info.pg_ant_num = ant_num;
gl_bt_coexist.board_info.btdm_ant_num = ant_num;
+ /* The antenna position:
+ * Main (default) or Aux for pgAntNum=2 && btdmAntNum =1.
+ * The antenna position should be determined by
+ * auto-detect mechanism.
+ * The following is assumed to main,
+ * and those must be modified
+ * if y auto-detect mechanism is ready
+ */
+ if ((gl_bt_coexist.board_info.pg_ant_num == 2) &&
+ (gl_bt_coexist.board_info.btdm_ant_num == 1))
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_MAIN_PORT;
+ else
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_MAIN_PORT;
} else if (BT_COEX_ANT_TYPE_ANTDIV == type) {
gl_bt_coexist.board_info.btdm_ant_num = ant_num;
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_MAIN_PORT;
+ } else if (type == BT_COEX_ANT_TYPE_DETECTED) {
+ gl_bt_coexist.board_info.btdm_ant_num = ant_num;
+ if (rtlpriv->cfg->mod_params->ant_sel == 1)
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_AUX_PORT;
+ else
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_MAIN_PORT;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h
index 0a903ea..f41ca57 100644
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h
@@ -535,7 +535,7 @@ void exhalbtc_set_bt_patch_version(u16 bt_hci_version, u16 bt_patch_version);
void exhalbtc_update_min_bt_rssi(char bt_rssi);
void exhalbtc_set_bt_exist(bool bt_exist);
void exhalbtc_set_chip_type(u8 chip_type);
-void exhalbtc_set_ant_num(u8 type, u8 ant_num);
+void exhalbtc_set_ant_num(struct rtl_priv *rtlpriv, u8 type, u8 ant_num);
void exhalbtc_display_bt_coex_info(struct btc_coexist *btcoexist);
void exhalbtc_signal_compensation(struct btc_coexist *btcoexist,
u8 *rssi_wifi, u8 *rssi_bt);
diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c
index b9b0cb7..d3fd921 100644
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c
@@ -72,7 +72,10 @@ void rtl_btc_init_hal_vars(struct rtl_priv *rtlpriv)
__func__, bt_type);
exhalbtc_set_chip_type(bt_type);
- exhalbtc_set_ant_num(BT_COEX_ANT_TYPE_PG, ant_num);
+ if (rtlpriv->cfg->mod_params->ant_sel == 1)
+ exhalbtc_set_ant_num(rtlpriv, BT_COEX_ANT_TYPE_DETECTED, 1);
+ else
+ exhalbtc_set_ant_num(rtlpriv, BT_COEX_ANT_TYPE_PG, ant_num);
}
void rtl_btc_init_hw_config(struct rtl_priv *rtlpriv)
--
cgit v0.12