kernel/usb-phy-tegra-Add-38.4MHz-clock-table-entry.patch
2016-04-28 13:42:42 +01:00

54 lines
1.6 KiB
Diff

From patchwork Wed Apr 6 07:54:05 2016
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: usb: phy: tegra: Add 38.4MHz clock table entry
From: Hunter Laux <hunterlaux@gmail.com>
X-Patchwork-Id: 606877
Message-Id: <1459929245-23449-1-git-send-email-hunterlaux@gmail.com>
To: Stephen Warren <swarren@wwwdotorg.org>,
Thierry Reding <thierry.reding@gmail.com>,
Alexandre Courbot <gnurou@gmail.com>, linux-tegra@vger.kernel.org
Cc: Hunter Laux <hunterlaux@gmail.com>
Date: Wed, 6 Apr 2016 00:54:05 -0700
The Tegra210 uses a 38.4MHz OSC. This clock table entry is required to
use the ehci phy on the Jetson TX1.
The xtal_freq_count is actually a 12 bit value, so it should be a u16
instead of u8.
Signed-off-by: Hunter Laux <hunterlaux@gmail.com>
---
drivers/usb/phy/phy-tegra-usb.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index 5fe4a57..f0431f0 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -164,7 +164,7 @@ struct tegra_xtal_freq {
u8 enable_delay;
u8 stable_count;
u8 active_delay;
- u8 xtal_freq_count;
+ u16 xtal_freq_count;
u16 debounce;
};
@@ -201,6 +201,14 @@ static const struct tegra_xtal_freq tegra_freq_table[] = {
.xtal_freq_count = 0xFE,
.debounce = 0xFDE8,
},
+ {
+ .freq = 38400000,
+ .enable_delay = 0x00,
+ .stable_count = 0x00,
+ .active_delay = 0x18,
+ .xtal_freq_count = 0x177,
+ .debounce = 0xBB80,
+ },
};
static void set_pts(struct tegra_usb_phy *phy, u8 pts_val)